Search Results

Search found 18341 results on 734 pages for 'neural network'.

Page 115/734 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

• "destination host unreachable" while ping attempt between 2 pc on 1 network

  - by Roberto Sadfasdf

  I have 2 computers in my network ones ip address is 192.168.2.31(PC-A) and the others is 192.168.2.33(PC-B). When I'm trying to ping from PC-B to PC-A it says: Pinging 192.168.2.33 with 32 bytes of data: Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Ping statistics for 192.168.2.33: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) And when i'm trying the otherwise it tells me same message with ip address switched..They are both can connect to the Internet

  Read the article

• Blacklist a single access point of a wireless network

  - by Zr40

  At my university, one of the wireless access points is failing. When something tries to associate to the network using that access point, it deassociates the client, claiming 802.1X authentication failure. Other access points do work normally using the same credentials. The issue has been reported, but after a month it still has still not been fixed. Now, I'm looking for a way to blacklist the access point's BSSID, so the OS prefers other access points on the same SSID. How can I blacklist specific BSSIDs in either Mac OS X Snow Leopard or Windows 7?

  Read the article

• ESXI 4.0 Slow response in opening anything accross the network on a Virtual Server running Win2008

  - by user40944

  Hi I recently installed a HP ML350G6 Server with Windows Small Business Server 200864bit, Exchange 2007. The server was running fantastically and we transferred all user data onto the new server and no problems for 2 weeks! We then installed SQL2008 and transferred the accounts package onto the server and this is where the problems started. Users are now complaining to open a work document can take 2 minutes and the same with regard to anything else. The server itself seems fine, the virtual server seems fine! No disk performance problems (doesn't go above 50% unless i really copy lots of things), no memory, (12Gb only using 7Gb) cpu (usage is low average about 15%) etc on both the VM and in Windows Task manager. I have made sure disk caching is enabled on the raid controller (which made no difference). Network cards are running 1Gb and plugged into HP GB switch. Please help!

  Read the article

• How to setup VPN on home network

  - by Tone

  I am a software developer. I travel and sometimes have a need to access my files at home and tweak other family members computers. I would like to connect to my home network via VPN and then RDP into whatever machine i need to. Currently i have a Windows Server 08 machine, which is my file server, database server, web server (for development work), source control repository, etc. (and also somewhat of a workstation when i need it to be). I want to use this same machine to run my VPN through. I have a linksys WRTG54 router. My ISP is AT&T DSL, with a dynamic IP address - so i'm assuming I'll either need to request a static IP or sign up with one of those static ip services.. where it keeps your dynamic ip synced up with a static one. While I do understand software engineering I am no expert in networking. What do i need to do to setup my VPN?

  Read the article

• Disable Network settings (TCP/IP & DNS) on Windows 7 Ultimate

  - by TiD91

  i also read this discussion here How to disable Tcp/Ip settings in windows 7 via GPO? about what i want to do but i still have problems. So here i am: i have a desktop pc with two accounts, both with Administrative rights. One is used by the entire my family, in particular by my brother. The problem is that i set some DNS and IP configurations to let be possible the VNC connection from remote. Now i would like to disable the network settings (TCP/IP and DNS) to prohibit my brother to change it preventing me to connect to it. So how can i do this? I set the policies from GPO but i still can change these settings from his account. Here's a pic of Registry Keys: http://imageshack.us/a/img339/3310/famigliapc2012092017274.png what didn't i do? Thanks in advance for your help. Rub|TiD

  Read the article

• Network connectivity issue

  - by kubiej21

  I am a novice cisco user and I am trying to investigate as to why one of our connections went down. We have a fiber network ring that is operating just fine. Connected to this ring via ethernet, is a lone 3560. This connection has worked flawlessly for the past year and a half. This morning, I noticed that I could not connect to that remote switch. I checked the configurations on both switches, and nothing has changed (as I expected). In the field, the port lights were flashing, indicating that some sort of communication is occurring. There is only 1 ethernet cable that has been run between these two locations, so testing an alternate path is not possible. What else can I do to fix this connection?

  Read the article

• Network-related icons suddenly removed

  - by Velcro

  Hello, On a fresh Windows 7 installation, I created some shortcuts icons to network shares on the Desktop. Without any warning, these icons are sometimes and randomly deleted from Desktop. I totally don't understand what it happens! They are not hidden, they just are simply deleted. This behavior occurs on one computer in my company. Others Windows 7 computers are not affected by that. And also it's the first time I encounter that. Do you have an idea about this problem? Thanks.

  Read the article

• Introducing a Windows Domain Controller into an all mac-client network

  - by Anon

  A company is about to hire me to be their I.T. Admin. (They currently have no Admin). In the interview, they stated one of the things they want me to do is put in a MS Domain Controller. The thing is, they are a graphic design company with about 100 Mac Clients and maybe 5 Windows Clients. So other than login-credentials and network shares, what is the benefit of this? Should I just tell them to use the OSX equivalent of AD? How hard is it to learn whatever OSX's AD is?

  Read the article

• A Duplicate name exists on the network

  - by Adam

  Recently we changed out office IT structure from having a dedicated server to be the DC, a dedicated server for the exchange etc... (Each running Windows Server 2003 R2) Now we have a single server running Windows SBS 2008 and created a new domain (with a different domain name) We then changed every PC so it connected to the new domain and renamed every PC with a new naming structure. After I had done this, we were getting several PCs that would get the following message just before the login screen (Alt+Ctrl+Del Screen) A Duplicate name exists on the network I have checked the ADUC and have removed the trouble PCs from the list and renamed each PC and changed the SID before connecting back onto the domain but still getting this message. I have tried everything that i can think of but still getting the problem. Any help would be greatly appreticated.

  Read the article

• Monitor torrent user in network [closed]

  - by Usman

  I am using active directory in windows server 2008 R2 having IP address is 10.10.10.10 and my DSL modem Ip is 10.10.10.101. All clients are using 10.10.10.101 default gw to access the Internet. I don't know who is using Torrent in network or downloading something via IDM or something else. I just want to Monitor my clients for who are download via torrent or whatever. Is there anything in Windows Server 2008r2 that would allow me to do this monitoring, or do I need something else?

  Read the article

• Multiple network interfaces and UDP packets distribution

  - by Robert Kubrick

  I have a Linux server with 2 1Gb network interfaces eth1 and eth2. If I start 2 clients listening to the same multicast address and each client connects through a different NIC (say client 1 listens to the multicast through eth1 and client 2 through eth2), then client 2 gets duplicate UDP packets. If both clients use the same interface eth1 on the other hand, both clients work fine. I have already tried to set arp_filter and proxy_arp to 1 (arp flux issue) but it hasn't solved the issue. Is this a Linux kernel problem? Or is there another way to setup the interfaces correctly?

  Read the article

• Automatically save attachments from mail on a network drive

  - by user269646

  Every morning I receive an automatically generated e-mail from a server, it includes a spreadsheet attachment. I made a rule in outlook that captures these emails. Now, I would like to make a macro to rename the attached file (. Xls) to =today() and saves it in a folder on a network drive. This macro must run every weekday at 8:00. I've made a lot of VBA in Excel, but have no experience in outlook. Might this be possible? And does anyone know how to do it? Kind regards Staal

  Read the article

• Can anyone recommend free network monitoring tools?

  - by Josamoto

  Hi all I have a machine at home on a 3G internet connection, and my PC is consuming approximately about 200MB per day in uploads & downloads. I'm using an application called Networx to monitor the upload/download usage, but I am on the outlook for the culprit application munching away on my cap. Networx tells me how much my connection uses in total, and I need to know how much each application uploaded / downloaded. Does anyone know of a network connection monitoring utility for Windows 7 that can give me a daily outline of how much data was uploaded & downloaded, and specify this on a PER APPLICATION basis. Thanks in advance!

  Read the article

• Can anyone recommend free network monitoring tools?

  - by Josamoto

  Hi all I have a machine at home on a 3G internet connection, and my PC is consuming approximately about 200MB per day in uploads & downloads. I'm using an application called Networx to monitor the upload/download usage, but I am on the outlook for the culprit application munching away on my cap. Networx tells me how much my connection uses in total, and I need to know how much each application uploaded / downloaded. Does anyone know of a network connection monitoring utility for Windows 7 that can give me a daily outline of how much data was uploaded & downloaded, and specify this on a PER APPLICATION basis. Thanks in advance!

  Read the article

• Cannot access internal network on OSX 10.6.6

  - by cabuki

  Last week, I began having trouble connecting to our internal web servers. Usually, a refresh would take care of it or switching to a different wireless network, but as of yesterday, this wasn't enough. We have an internal DNS server using dnsmasq and a private internal host name (us.lcl). Once I started having more issues with the names not resolving, I tried pinging the server. Using the internal host name (s1.us.lcl), it failed. I tried using the IP address, but that also failed. I have no problems accessing external sites with the exception of it being a bit slower than normal. A reboot yesterday at lunch time after following the instructions here seemed to fix the issue, but when I came into the office this morning, it had stopped working. As of this posting, I cannot ping, ssh or access the web server using the internal host name or ip address. I'm the only one running 10.6 in my office and none of my colleagues has this issue.

  Read the article

• FreeBSD Jail own network stack with vimage

  - by bodokaiser

  I want to throw all services from the host system and put them in jails. Unfortunatly this doesn't work for file sharing (e.g. nfsd) because the jails don't have there own network stack by default. I know read something about vimage which would solve this issue. See more in this thread: http://forums.freebsd.org/showthread.php?t=9006 The use of vimage with raw jails should use moreorless but the use with vimage and ezjail makes it hard. Does anyone have experience about this topic and wants to share it? Regards

  Read the article

• Need to configure multiple default gateways for four seperate physical network ports for a FreeBSD Webserver

  - by user20010

  I need to configure default gateways for four separate physical network interfaces for a FreeBSD Webserver. Basically, this is a web server that needs to be accessed by multiple WANS. I've been using various online resources, and a combination of setfib, pf, and ipfw. This web server will be deployed in multiple sites where access to next hop router info is not available, so we can't use static routes. We've used setfib to successfully create multiple routing tables and can ping beyond every default gateway we've created. Using setfib # ping ip.addr.what.ever we can ping anything available on a wan and beyond the router. The problem is we can't get Apache web server (port 80) traffic to route out when external users access the server(box). Multiple people have examples of binding setfib to ipfw commands, but none of them seem to work.

  Read the article

• I can't connect to my WAMP server from a client on the same network

  - by F4r-20

  Usually I would manually set up Apache and PHP but this time I thought I would go for the WAMP alternative. I've set up WAMP and it's working perfectly fine on the host machine. If I try and access the WAMP server from another machine on the same network (same subnet too: 192.168.1.*) I get this message: Forbidden You don't have permission to access / on this server. I have been online and gone through steps. I have changed Allow from 127.0.0.1 to Allow from all and it's still not working. Is there anything else I can try? Thanks.

  Read the article

• Howto setup a `veth` virtual network

  - by Reinder

  I'd like to setup three virtual network interfaces (veth) which can communicate with each other. To simulate a three node cluster, each program then binds to one veth interface. I'd like to do it without LXC if possible. I tried using: Created three veth pairs: sudo ip link add type veth Created a bridge sudo brctl addbr br0 Added one of each pair to the bridge: sudo brctl addif br0 veth1 sudo brctl addif br0 veth3 sudo brctl addif br0 veth5 Configured the interfaces: sudo ifconfig veth0 10.0.0.201 netmask 255.255.255.0 up sudo ifconfig veth2 10.0.0.202 netmask 255.255.255.0 up sudo ifconfig veth4 10.0.0.203 netmask 255.255.255.0 up Then I verified if is works using: ping -I veth0 10.0.0.202 but it doesn't :( The I added IP addresses to the veth1,veth3,veth5 and br0 interfaces in the 10.0.1.x/24 range. But that doesn't help. Any ideas? or a guide, all I find in how to use it with LXC. Or am I trying something that isn't possible?

  Read the article

• Network flooded with seemingly empty packets

  - by Adam Particka

  Let me preface this with the fact that I'm just a web developer at my company with little networking knowledge. Earlier today there was a department that lost all of their network connections so I popped open Wireshark and observed the influx of packets to my machine. There was normal traffic (ARP requests, etc.) coming in at ~50 packets every second. Then all of a sudden the log was flooded with packets arriving ~5000 a second. It looks as though they all contain the same data, just a looped sequence. We have someone here looking at it but I thought I would ask if anyone had seen anything like this before. Here's a selection from one of the captures in Wireshark. http://www.cloudshark.org/captures/06f950725c74

  Read the article

• Can't use a network CD-ROM

  - by user53814

  Hi, there! I have a computer with Windows XP and I'm trying to use my local network to use the CD-ROM of my notebook with Windows 7. In windows XP computer with VLC I can open the menu of the DVD but after choose the option for the first chapter the movie window shuts down (but the VLC stays open). With BS-Player when trying to start the first chapter it freezes... Is this possible to fix? Thanks in advance!

  Read the article

• Setting up central git repo on local Mac network

  - by Dashman

  We are a team of three, all working on our local machines on the same internal network. We will all be working on websites in local working copies of the same Git repo hosted on Github. We have an internal staging machine here (dev.internal), and I am looking for a way for us to be able to push to this machine. At each milestone in the development cycle. In essence, all I really want us to be able to do is add the dev.internal machine as a remote, and push to this whenever we are ready. Could somebody please point me in the right direction to get this set up?

  Read the article

• My wireless network slows down every 7.5 minutes when my desktop is switched on

  - by Dog Ears

  My network has lag spikes lasting for a few seconds every 7.5 mins. The spikes also effect any other computer connected connected to my wirless router at the time. My wife has to connect her laptop via a cable to prevent the lag causing problems when she's VPNing into her work. If I switch my PC off the problem goes away! I've got an Edimax 7728ln 802.11n wireless card and Speedtouch 585v7 (I'm with Be) I've Tried... Updated the drivers from Edimax website: 2.0.3.0 (it does say 3.0.2.0 in devices properties though) WLAN Optimizer doesn't seem to be helping What can I do?

  Read the article

• Network randomly drops

  - by user147661

  I have a VPS, ubuntu server 12.04 and for unknown reasons the network connection drops and I have to access my vps via the console and ifdown eth0 and ifup eth0. This brings the connection back up from about a few seconds to a few hours. I have run tail -F /var/log/syslog to monitor the log to see what happens at the point of drop and there is nothing unusual. The vps is running under virt-manager and the hardware is set to virtio. I have had linux friends look at my vps and they are unsure of what is the cause.

  Read the article

• How create a virtual network for practice?

  - by light

  I need to organize a virtual network for practice with Windows Server 2008 and several workstations with Windows OS. To make it all I only have a laptop with Dual-Core 2.10Ghz, 3 GB RAM, 50 GB free space and Windows 7 on it. Also I have external USB 3.0 hard-drive with 250GB free space and flash disk with 8GB space. What can you suggest? Because I have limited resources, I think to install ESXi 5.1 on the main disk of my laptop as second OS, with installed Windows 7. I have no idea will it work or not, but after that I want to try to create hosts using availible space on external hard-drive. Is it possible?

  Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >