Search Results

Search found 6897 results on 276 pages for 'samsung mobile'.

Page 115/276 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

• Inconsistent black levels in windows 7 media center

  - by James G

  I've got a HTPC running windows 7 64bit, hooked up to a Samsung LCD TV. My problem is different types of video are displaying different black levels on the TV. When I play a bluray through Arcsoft Total Media Theater I have to set the "HDMI Black Level" to "normal" in the TV picture options menu. When I play recorded TV through WMC I have to set it to "low" otherwise the black colors on the video are washed out and grey. Is there any way to configure the system so all videos are displayed with the same black level? The hdmi black level setting is deep in Samsung's menus so it's becoming a chore to keep switching it everytime I watch a different type of video. I'm using an ATI 4670 graphics card with HDMI output going straight to the TV. In the ATI catalyst control center I've got pixel format set to RGB 4:4:4 (Full RGB) since the TV wont allow me to change the HDMI black level if I choose one of the other settings.

  Read the article

• Windows detected a hard disk failure* - what should I do?

  - by bart

  I'm using Windows 7 x64 Ultimate, I'm getting windows error popups like this one for about 3 days, multiple times a day: This Samsung SpinPoint F3 HD502HJ 500 GB is about 2 years old and I already checked it with Samsung ES Tool 3.0, did all the scans (took hours) and everything is fine! I have no malware, viruses and this started to happen after I have had some electrcity issues at my house (multiple power surges / overvolatege during the night, PC was connected, but turned off), any ideas? What other test should I perform? I believe the disk could be damaged, but then diagnostic tools should prove this, right? *in fact "Windows detected hard disk problem" but I was unable to put word "problem" within the title as well.

  Read the article

• SATA 3 PCIe Controller working with decreased performance (slower than SATA 2)

  - by V M

  After reading this question about maxing out an SSD I decided to do so myself. My mobo only supports SATA 2 and has two PCIe 2.0 x1 connectors (which promiss up to 500 mb/s). So after some searching I decided to go with this controller from amazon. My Samsung magician benchmark before upgrade (running SATA 2): Now after installing the controller all of the benchmark scores are lower (even though the Samsung Magician app confirms its connected to a SATA 3 port): What can I do to remedy this? Any help is appreciated.

  Read the article

• Cisco ASA SSL VPN options?

  - by JonH

  Disclaimer: I am not a network admin so I may be wrong here but I thought asking here would help. I'm a developer mainly on the .net framework as well as helping get a mobile intranet app working. Because this app is only allowed to be used on our network I can easily run this app on our wireless network connection within our building. All is fine and dandy but we'd also like to be able to run this mobile app at say a customer plant using VPN software. I thought surely this could be easy as we exclusively use Samsung s4 phones so I thought I'd download Cisco's Samsung any connect software to allow us to VPN...its right on the play store. Sure enough it doesn't work. I mention it to our network admin who says not possible since we have old technology that doesn't support SSL. He mentions we'd have to upgrade all of our hardware, the firewall, etc. to get this to work. We really need VPN on our phones not only for this app but other internal apps, etc. He did mention the following: We can’t upgrade the software on our ASA, because we don’t have enough memory for the new version.  (the asa is very old).  We can’t add more memory, so we would have to get a new firewall, which I have been told I cannot do. In addition he also mentioned: The Samsung AnyConnect client uses SSL to connect.  With the current (old) version of software that our firewall is running, the SSL connections are unreliable.  We need different hardware in order to upgrade our firewall, which we are unable to attain at this time.  This is the same reason that Windows 8 clients are not able to connect. I am curious hence me asking. vpns seem to be fairly simple to setup. What other options do I have aside from making this a public site or web service that consumes this data over the internet as this is a complete no no. What can we do to make this work without that much effort or cost.

  Read the article

• How to quickly switch monitors on multi-monitor setup?

  - by Saxtus

  At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer?

  Read the article

• How to quickly switch monitors on multi-monitor setup? (W7)

  - by Saxtus

  At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer? Thanks in advance.

  Read the article

• Can I use an nVidia Geforce 9600GT for triple-monitor?

  - by John Rudy

  My work PC has (as you can guess from the title) a single Geforce 9600GT card. According to the spec page for this card, both DVI ports are Dual-Link DVI. Both are currently in use on Dell 19" 1280x1024 screens. I'm running Windows 7, with Aero enabled, for what that's worth. What I'm wondering is if I can use a standard DVI splitter cable to drive a third screen from one of the ports -- specifically a Samsung 22" 1680x1050. I'm really outgrowing the two-screen setup, and am strongly considering bringing in my home monitor (which is almost never used) to bolster my usable space. If I can't, then my alternative is to replace one of these Dells with that Samsung, to give me at least a "little" more space. (Before you ask, there's probably no chance I can get my company to spring for a second video card and third monitor. Even if I could, it would not be politically expedient, as a number of my other coworkers are already pretty jealous at my setup.)

  Read the article

• Logitech bluetooth audio receiver quality

  - by lietus

  I bought a Logitech Bluetooth Audio receiver, and have run into a problem: When playing audio, it contains short hisses/clicks on higher tones or vocal+heavy instrumental music (Sound quality appears to be unclean). I'm not sure what could be the reason, but this only happens when I play from certain devices. My laptops (a Dell XPS Win7, and an Asus Eee seashell Win7) and my phone (Samsung Player 5) both have the problem. However, when I tried using a Samsung S2 phone, the audio was crystal clear. Seems that this could be something with Bluetooth transiting device.. Has anyone encountered a similar problem?

  Read the article

• Bridging two connections in windows 7

  - by Serban Razvan

  I have recently bought an Samsung UE32ES5500 and I want to connect it to the internet. Not wanting to buy an expensive Samsung wireless adapter for the TV, I've decided to use an ethernet cable. Because the Internet cable passes through underground to the bedroom and the TV is located in the living room, i decided to put a router in the bedroom, and receive it's signal in the living room using a windows 7 laptop. Afterwards I connected the laptop to the TV through an ethernet cable, and bridged the two connections in Network Connections in Control Panel on the laptop. The TV successfully finds the laptop (and the router I think) but still cannot connect to the internet. Does anyone knows a solution to this problem? (the connections must be bridged because I want to have only one network in the house)

  Read the article

• ACHI drivers for W8.1 with amd

  - by LeiNaD_87

  I hope you can help me... I just installed a SSD (Samsung EVO 840) and windows 8.1 pro in my pc with M5A99X EVO ( chipset AMD 990X/SB950 ) motherboard. The SSD is installed in sata3 socket using a sata3 wire. The AHCI mode is ON in the bios. I configured the ahci controller and now device administrator looks like this: All works, but the speed of the SDD is very slow (like a HDD). Samsung magician doesn't recognize the sata mode neither the ahci. I tried to install more drivers but the system broke and I need to reinstall windows :( I tried many things from the web, but any works: Modify windows registy Use compatibility mode Modify the amd drivers and install it unsigned Thank you for your time!! EDIT to add a CrystalDiskMark benchmark

  Read the article

• Why does Windows 7 x64 work faster than an x86 edition on my PC?

  - by Jasper

  Why does Windows 7 x64 work faster than an x86 edition on my PC even though I mostly use x86 things in it? What's wrong with me, and what am I missing? Majority of the things I use is x86 (e.g. DAWs, games, media players). A considerable amount of them, however, are x64 (although their x86 counterparts work just fine). I've tried using the same things on the same system but always ended up finding Windows 7 x64 working slightly faster than x86. I'm very observant. I even notice the tiniest window animations. System: Windows 7 Ultimate x64 CPU: Intel Core 2 Duo E7500 @ 2.93 GHz RAM: 2 GB x 2 = 4 GB DDR2 @ 332 MHz Motherboard: Intel D945GCNL Graphics: ATI Radeon HD 4350 @ 1 GB Dedicated Audio: M-Audio FastTrack Pro HDD: Samsung HD753LJ 733 GB & Samsung HD160JJ 156 GB As you can see, my system is old.

  Read the article

• RAM Part Numbers - Meaning?

  - by 1Up

  I hope this is the appropriate stackexchange to post this question. EDIT: I'm attempting to replace faulty ram and am trying to understand the meanings of the label to make correct decision. I have a 2gb stick of ram which appears to have gone bad. It is a SAMSUNG Top line: 2GB 1Rx8 PC3-10600U-9-10-A0 The part number: M378B5773CH0-CH9 1051 Doing a number of searches, I end up here: http://www.reusetek.com/samsung-m378b5773ch0-ch9-1110-4gb-2x2gb-1rx8-pc310600u-09-10-a0-ddr3-desktop-memory/ M378B5773CH0-CH9 1110 Notice there is a difference: 1051 OR 1110 What is the meaning of the part number, and the last 4 digits? Is this a significant difference, and one that affects the machine?

  Read the article

• windows 7 haning and after shut down it does not start

  - by ads

  My windows 7 samsung i5 second gen laptop started hanging all of a sudden. I recovered it to factory image, it ran fine for 1 day then again started hanging. When i shut it down, i didnt start, it showed the msg bootmgr missing, then i used my samsung recovery cd and installed windows 7 home. When again i shut it down it didnt bootup. Just a blank screen. System repair is also not able to repair. Then i installed windows 7 ultimate. Aftr shutting it down it again ahowed the blank screen.. cant think of any other option, I am in a fix. Could anyone tell me what to so. Machine is just one yr old.

  Read the article

• How to install RAID drivers on already installed Windows 7?

  - by happysencha

  64-bit Windows 7 Ultimate 6GB RAM Intel i7 920 Intel X25-M SSD 80GB 2,5" Club 3D Radeon HD5750 GA-EX58-UD4P Motherboard I've been running fine with Windows 7 installed on the SSD. I wanted to create an mirrored Raid-1 setup for backups using two hard disks, so I ordered two Samsung HD203WI. This motherboard supports two different RAID controllers, the Intel's ICH10R and Gigabyte's SATA2 SATA controller. There are 6 SATA ports behind the ICH10R and 2 SATA ports for the Gigabyte controller. I googled around and seemed that the ICH10R is a better choice and since then I've been trying to make it work. When I activate the [RAID] mode from BIOS, the Windows 7 gives BSOD exactly as described by this guy: "Windows 7 will start to boot, it gets to the screen where there are 4 colors coming together and it blue screens and restarts no matter what I do." First thing I did: turned off the RAID and booted to Windows and tried to install the SATA RAID drivers from Gigabyte. I launch the driver installation program and it gives "This computer does not meet the minimum requirements for installing the software" error. I then tried Intel's Rapid Storage Technology drivers (which apparently is the same as the one offered at Gigabyte's site), but it resulted in exactly the same error. I then detached the new Samsung hard disks from the SATA ports, but left the [RAID] enabled in BIOS. To my surprise, it still BSOD'd, so at this point I knew it is an OS/driver issue. Also, I tried with the Gigabyte's RAID enabled (while the ICH10R RAID disabled) and it booted just fine. So then I thought, that maybe I can't install the RAID drivers from within the OS. So I caused the BSOD on purpose once again, and then with ICH10R RAID activated and Samsung hard disks attached, I choose the Windows 7 Recovery mode in the boot menu. It sees some problem(s), tries to repair, does not succeed and does not ask for drivers (which I put on a USB stick) to install. I also tried to use the command-line in the recovery: "rundll32 syssetup, SetupInfObjectInstallAction DefaultInstall 128 iaStor.inf" but it gave "Installation failed." So I'm clueless how should I proceed. Do I really need to re-install Windows 7 and load RAID drivers in the Win7 setup? I don't want to install any OS on the RAID, the Windows 7 is and will be on the SSD. I just want to have a RAID-1 backup using those two hard disks. I mean why would I need to re-install operating system to add RAID setup?

  Read the article

• How can I send SMS from my PC using my Android Phone (Galaxy S3)

  - by Dean Rather

  I've been a long-time Nokia fan, but finally succumbed to the Samsung Galaxy S3's amazing screen, & Android's Open community. One feature I use a lot (about a hundred times a day...) is Nokia PC Suite's ability to send SMS via the phone. It: Uses my phone's contact list. Notifies me when I get an sms. Allows me to send SMS using my PC's keyboard. Essentially turning SMS into just another IM medium I use on the PC. How will I do this with the Samsung Galaxy S3 + Windows 7?

  Read the article

• Windows 7 not booting after installing Ubuntu 12.10

  - by Imran Choudhry

  I have Samsung sf511 with Windows 7 Home preinstalled. I installed Ubuntu 12.10 last night. First I mounted downloaded ubuntu 12.10 iso on a DVD from Windows 7, then I restarted, changed the boot option to DVD and let the Ubuntu DVD run. I selected "Install ubuntu alongside windows 7". In the next step I allocated the diskspace . Ubuntu installed perfectly and it ranned OK. I spent a good time exploring Ubuntu. When I restarted to start my work on Windows again and selected Windows 7 to boot, it showed blue screen after booting up (after logging in). I tried restarting several times but the same blue screen keep showing at the same point of bootup. I also restored windows to an earlier time. Left with no option I booted from Samsung provided windows recovery option. The recovery process ran fine but when it restarted to boot Windows for the first time all I see is a black screen. Nothing happens. It switches between dark command promt screen to a pitch black screen as if it's rebooting after every 10 seconds or so. The laptop can be booted from the DVD Drive or USB drive but is not booting from Harddisk. What should I do in order to use both Windows 7 and Ubuntu?

  Read the article

• Google Introduces Android Gingerbread and Nexus S Phone

  - by Gopinath

  Google today officially announced the availability of next version of Android(version 2.3) nicknamed “Gingerbread”. This is a long awaited upgrade to it’s smartphone platform from Google and below are the highlights of new features: Rich multimedia – including support for VP8 and WebM video and new audio effects. Support for front-facing cameras, SIP/VoIP and Near Field Communication (NFC). Enhancements for game developers, including new sensor types. You can read more about the release at Google blog post and watch this embedded video. Samsung Nexus S – The First Gingerbread Android Phone Samsung’s Nexus S is the first Android phone to be released with Gingerbread operation system. This is a phone that was designed with direct inputs from Google team and comes with a clean install of Android OS – no additional software layers from third party OEMs or carriers. Visit Nexus S site for more details This article titled,Google Introduces Android Gingerbread and Nexus S Phone, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Windows expand over 2 monitors in quad-monitor setup

  - by Martin

  i just installed ubuntu 11.10 with my previous hardware setup: 4 monitors and 2 identical nvidia graphic cards. draging windows around all 4 monitors works nice, but when i maximize a window it expand always over 2 screens. (2x twinview). i had an workaround for this in 11.04 but cant remember what it was... may one of you guys have quad monitors up and running with window maximizing on only one screen my xorg.conf looks like this: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 280.13 (buildd@allspice) Thu Aug 11 20:54:45 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" # Removed Option "Xinerama" "1" # Removed Option "Xinerama" "0" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" 0 1080 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SMB2220N" HorizSync 31.0 - 80.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SMB2220N" HorizSync 31.0 - 80.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 550 Ti" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 550 Ti" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "True" # Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select" # Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "TwinView" "True" # Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select" # Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

  Read the article

• Spinup time failure

  - by bioShark

  I am not sure this is a real question or a bug I should report Ubuntu. Using: Ubuntu 11.10, on a Intel Q6600, Samsung Spinpoint F4 2TB. I have set my PC on Suspend and after I came back, pressed Enter and after logging in everything was back to normal. However, I had a message from Disk Utility that one disk reports errors. I entered Disk Utility, and my Samsung 2TB disk, the one on which my Ubuntu is installed, had the SMART Status turned red, with error message on it. The error was: Spinup time failed Value 21, Threshold value was 25 (so the error was reported because 21 < 25) I restarted and booted up in Windows to see what HD Tune is reporting. Unfortunately it was exactly the same 21/25. After reading up on Wiki about SMART and the errors, I discovered that Spinup time is the time required for the disk to reach full spinning speed in milliseconds. Then it hit me that, in Ubuntu I had Suspended the system, making essentially all my hardware stop. And when I rebooted to Windows, the hardware doesn't really stop, so SMART's reading of the Spinup time was still from Ubuntu's suspension. So I did a full PC stop and then booted up again, both in Ubuntu and Windows to see if there are different readings. Both reported successful Spinup time, 68 (a little better then 21 :) ), although in Disk Utility I have a nice message: Failed in the Past So now I am pretty sure that Ubuntu didn't handle the Suspend correctly, but then again should I worry about Imminent hardware failure ? Am I missing some drivers? Should I report this as a bug to Ubuntu? Sorry if this was a bad place to ask this question.

  Read the article

• Getting MTP to work with a Galaxy tab 2 7.0?

  - by Wouter

  I'm trying to get MTP with the galaxy tab 2 7.0 working on my ubuntu installation. Such that I can access the files. I tried to do what is described here: http://www.omgubuntu.co.uk/2011/12/how-to-connect-your-android-ice-cream-sandwich-phone-to-ubuntu-for-file-access I however fail at executing one of the following commands mtp-detect | grep idVendor mtp-detect | grep idProduct This fails [20:42|0] $ mtp-detect | grep idVender Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 [20:44|0] $ mtp-detect | grep idProduct Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 Now my guess was was that the idVender is the same as the VID (04e8) and the idProduct is the same as PID (6860) Now I continued to work with those values and completed the tutorial. When finished I tried android-connect This returned fuse: bad mount point `/media/GalaxyTab': Transport endpoint is not connected Does anybody have a clue what to do? Also I want to note that when I connect my GalaxyTab 2 7.0 that I still get a pop-up of ubuntu that a device was connected. I also can still see the mapstructure, the problem however is is that all the folders have 0 bytes and do not have any subfolders. I can only see the folders in the root. ps. I also checked a similar question and tried what is described in this answer http://askubuntu.com/a/88630/27480

  Read the article

• One of the partion on a usb harddisk cannot automount

  - by holmescn

  It is a very strange problem. My usb harddisk has four partitions, one is primary, the other three are logical (contained within an extended partition). When I plug in the disk, three of the partitions are mounted automatically except one--the first logical partition in the extended partition. Initially I thought it is the problem of system (at that time I used Mint). But after I change to Ubuntu 12.04, the problem wasn't solved. I don't want to add a rule in fstab, and I want to know what happened. The disk is fine, and the partition can be accessed in Windows and mounted manually. result of dmesg | tail: [100933.557649] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd [100933.651891] scsi8 : usb-storage 2-1.2:1.0 [100934.649047] scsi 8:0:0:0: Direct-Access SAMSUNG PQ: 0 ANSI: 0 [100934.650963] sd 8:0:0:0: Attached scsi generic sg2 type 0 [100934.651342] sd 8:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [100934.651977] sd 8:0:0:0: [sdb] Write Protect is off [100934.651989] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00 [100934.652836] sd 8:0:0:0: [sdb] No Caching mode page present [100934.652848] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.655354] sd 8:0:0:0: [sdb] No Caching mode page present [100934.655367] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.734652] sdb: sdb1 sdb3 < sdb5 sdb6 sdb7 > [100934.737706] sd 8:0:0:0: [sdb] No Caching mode page present [100934.737725] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.737731] sd 8:0:0:0: [sdb] Attached SCSI disk result of parted -l: Model: SAMSUNG (scsi) Disk /dev/sdb: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 21.5GB 21.5GB primary ntfs 3 21.5GB 320GB 299GB extended lba 5 21.5GB 129GB 107GB logical ntfs 6 129GB 236GB 107GB logical ntfs 7 236GB 320GB 83.8GB logical ntfs

  Read the article

• Help with dual booting Windows 8.1 Professional and Ubuntu 13.10

  - by user1292548

  I recently installed a clean version of Windows 8.1 Professional on my Lenovo Y500 (with Samsung 256GB 840 Pro SSD). I have Windows all set up and running normally. I am trying to dual boot Windows 8.1 and Ubuntu 13.10, but the installation procedure don't allow me to either "Install alongside..." or shows my SSD partitions correctly when I chose the "Something Else" option. I have created a 25GB partition of free space in the Windows disk manager, but on the installation screen on Ubuntu, it shows the whole drive as a free space. I have tried installing with a burned .ISO disk and a bootable USB, the results are the same for both. Windows Disk Management screen: http://imageshack.us/a/img855/9504/59zu.jpg The Ubuntu installation screen: http://imageshack.us/a/img62/2712/9g6i.jpg I've ran into this problem before when trying to dual boot Ubuntu and Windows 7 Professional a month ago. But I gave up and never resolved the issue. --EDIT-- I tried what Eero Aaltonen suggested, and this is my result: ubuntu@ubuntu:~$ sudo parted /dev/sda print Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA Samsung SSD 840 (scsi) Disk /dev/sda: 256GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags ubuntu@ubuntu:~$

  Read the article

• Workspace Issues on ubuntu 12.10

  - by JaySch

  I'm having the following problem with 12.10 Unity running on a Toshiba A505 16" display laptop using an external 24" Samsung LED monitor (resolution 1920 x 1080 (16:9). Also using the default 2 x 2 workspaces: After powering up the laptop, I Click the Workspace Switcher and the 4 images which represent Workspace 1, Workspace 2, Workspace 3, and Workspace 4 are visible but are in a very elongated, stretched out aspect ratio. Also, any desktop icons placed on the left side of the screen don't show up when I go to full view on any of the 4 workspaces. To resolve this issue, I open up the laptop lid until the video display switches from the external Samsung LED monitor to the internal laptop display, which renders the four workspaces perfectly. I then close the laptop lid and now the workspaces display the correct aspect view; both in the workspace switcher thumbnail view an in full view. I can now see the full desktop, including any desktop icons. Is there a way to configure my system so that Workspaces work properly when the laptop is connected to an external monitor without having to open and close my laptop? Thank you.

  Read the article

• HTC to launch Windows 7 phone in India

  - by samsudeen

  It is a good news for the Indian smart phone users as the wait is finally over for Windows 7 mobile.The Taiwanese  mobile giant HTC is all set to release its Windows 7 based Smartphone series in India from January. HTC HD7 & HTC Mozart , the two smart phones running on Windows 7 OS started appearing on the HTC Indian website (HTC India) from last week.Though Flip kart (Indian online e-commerce website)  has started getting pre -orders for HTC HD7 a month ago , the buzz has started from last week after the introduction of “HTC Mozart”. The complete feature comparison between both the smart phones is given below. Feature Comparison HTC Mozart HTC HD 7 Microsoft Windows 7 Microsoft Windows 7 Qualcomm Snapdragon Processor QSD 8250 1 GHz CPU Qualcomm Snapdragon Processor QSD 8250 1 GHz CPU 8MegaPixel camera with Xenon Flash 5 MP, 2592?1944 pixels, autofocus, dual-LED flash, 480 x 800 pixels, 3.7 inches 480 x 800 pixels, 4.3 inches 11.9mm thick and Weighs 130g 11.2 mm thick and Weighs 162 g Bluetooth 2.1 Bluetooth 2.1 8 GB of internal storage memory 8 GB of internal storage memory 512MB of ROM and 576 of RAM 512MB of ROM and 576 of RAM 3G HSDPA 7.2 Mbps and HSUPA 2 Mbps 3G HSDPA 7.2 Mbps; HSUPA 2 Mbps Wi-Fi 802.11 b/g/n Wi-Fi 802.11 b/g/n Micro-USB interconnector Micro-USB interconnector 3.5mm audio jack 3.5mm audio jack GPS antenna GPS antenna Standard battery Li-Po 1300 MA Standard battery, Li-Ion 1230 MA Standby 360 h (2G) up to 435 h (3G) Up to 310 h (2G) / Up to 320 h (3G) Talk time Up to 6 h 40 min (2G) and 5 h 30 min (3G) Up to 6 h 20 min (2G) / Up to 5 h 20 min (3G) Estimated Price “HTC HD 7″ is priced between  INR 27855 to 32000. though the price of “HDT Mozart” is officially not announced it is estimated to be around INR 30000. Where to Buy The Windows 7 phone is not yet available in stores directly, but most of the leading mobile stores are getting pre -orders. I have given some of the online store links below. Flip kart UniverCell This article titled,HTC to launch Windows 7 phone in India, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Flash/Flex/Air and iOS

  - by David Archer

  I'm just a little confused with all of the news recently regarding the cancellation of mobile flash, so was hoping for a little help. I've had a search through and can't find the answers to these questions, so any help would be great. First up, I'm looking to create a game in Flash first, to test whether the concept works as a fun game (on Newgrounds/Kongregate/Facebook etc.). Would it be best to use Flash CS5.5, or Flash Builder? Secondly, with mobile flash now being discontinued by Adobe, could I still port this game over to iOS through the Flash platform, or would it be better at that point to re-write the whole game using Objective C? (NOTE: I'm not an Objective C developer, but am instead a Javascript and Actionscript dev). Any help would be great. Thanks!

  Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >