Search Results

Search found 34060 results on 1363 pages for 'webpage access'.

Page 115/1363 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

• Linux box acting as wireless access point to share the internet connection

  - by Suresh

  A linux machine is connected to internet over two interfaces ppp0 and ppp1 using two modems. Also this machine acts as wireless access point through an interface say, eth0 with ip address 192.168.1.1 and acts as gateway for the connected devices through this network with subnet mask 255.255.255.0 Now is it possible to achieve the following: When any of the connected devices through wireless AP needs internet connection linux machine has to use ppp1 interface for internet. If any of the applications on the linux machine needs internet connection linux machine should use ppp0 interface for the internet. Can this be achieved by adding rules to chains in filter/nat tables? If the kernel routing table has a default rule to route the default traffic through interface ppp0, wil kernel completely ignore ppp1 for internet? PS: new to networking and routing concepts, If the question is not clear leave a comment, will try to give more information.

  Read the article

• Sonicwall site-to-site can not access remote network

  - by vpnwizard

  I have 2 SonicWall devices (tz100) in 2 different geographical locations. They are connected to each other using site-to-site vpn connection and this works just great. Device A network - 192.168.1.0/24 Device B network - 192.168.2.0/24 When I connect to one device, I can access, from my computer, anything on that specific subnet. However, I am unable to view anything, from my computer, on the other network. Is there a setting somewhere that will forward my requests to the other subnet? Example - I VPN into Device A, but would like to get to a server which is on the Device B network (192.168.2.0/24)

  Read the article

• Why am I getting cgi-sys/defaultwebpage.cgi coming up when I browse my webpage?

  - by CraigJ

  I've recently set up a website with a smaller hosting company. The plan has a dedicated IP. They sent me emails to say it's all set up, but now their support channels are all unresponsive even though they say it's open 24 hours. In the File Manager in the cpanel I've put an index.html file in the public_html directory. But when I point my browser to the IP address given to me, it comes up with the cgi-sys/defaultwebpage.cgi page. What is the problem? I haven't set the name-servers for my domain yet, but that shouldn't be a problem because I am using the IP address in the browser. Note: I don't think I have access to ssh.

  Read the article

• Proper procedure - sftp access to www folder - To be able to upload files

  - by Jay

  My www folder is root:root. What should it be? My site works perfectly but maybe I am doing something wrong. My nginx.conf says user is 'nginx'. Should I be changing the www onwership and group to that or something else? Mainly I want to be able to sftp into the www folder using FileZilla. Preferably only allow access to the www folder. I want to be able to upload the website files but I just don't know the proper procedure. I have tried changing owners and groups but I get worried some part of the stack will not like it. For example does nginx play along, and php? I thought about having a sftp group or even an sftp user. But I don't want to go down a path that should be avoided. What should I be doing with my setup?

  Read the article

• VMware ESXi - vSphere - Can't exit VM console access

  - by caleban

  I'm running ESXi 4.1 on a Dell T110 Server I connect to ESXi using vSphere vSphere is running inside a Windows 7 VM The Windows 7 VM is running in VMware Fusion on my Mac OS X system When I'm in vSphere and I've selected a VM and I click the console tab on some systems the VM console won't release me when I press the control + command keys. pfSense (FreeBSD) and Ubuntu Server behave like this. I can't exit their console screen. I have to shut down these VM's to be released from their VM console access. Windows, Ubuntu Desktop, etc. all behave like I'd expect; When I press the control + command keys I'm released from the VM console and I'm able to navigate in vSphere. Does anyone know what might be causing this or a way around this? Thanks in advance.

  Read the article

• Using .htaccess to protect direct access of files

  - by claydough

  We need to prevent direct access of files on our site from someone just entering a URL in their browser. I got this to work by using an htaccess file and it is fine in IE & Safari, but for some reason Firefox doesn't cooperate. I think it has something to do with the way Firefox reports referrers. Here is my code in the .htaccess file. RewriteEngine On RewriteBase / RewriteCond %{HTTP_REFERER} !^http://(my\.)?bigtimbermedia\.com/.*$ [NC] RewriteRule \.(swf|gif|png|jpg|doc|xls|pdf|html|htm|xlsx|docx)$ http://my.bigtimbermedia.com/ [R,L] If you want to see an example of this, try accessing this first... http://my.bigtimbermedia.com/books/bpGreyWolvesflip/index.html It blocks it properly in all browsers. Now if you go to this URL and click on the link, it works in IE and Safari, but Firefox chokes and seems like it is in a loop. Any ideas how I can get this to work in Firefox? Thanks!

  Read the article

• Grant a user access to directories shared by root (mod: 770)

  - by Paul Dinham

  I want to grant a user (username: paul) access to all directories shared by root with mod 770. I do it this way: groups root (here comes a list of groups in which root user is) usermod -a -G group1 paul usermod -a -G group2 paul usermod -a -G group3 paul ... All the 'group1', 'group2', 'group3' are seen in the group list of root user. However, after adding 'paul' to all groups above, he still can not write to directories shared by root user with mod 770. Did I do it wrongly?

  Read the article

• Need IP port forwarding to access an internel service running on an internal machine

  - by appleluo

  I am trying to configure iptables to do port forwarding for certain request. The scenario is like this: Login node A can be accessed from outside Compute node B that running the service can be accessed from A but not from outside. I want to set up iptables so that a request for the service on B from outside can be accessed through A. A has two ethernet ports: Internal eth0, with ip internal_A and External eth1, with ip external_A. B has 1 ethernet port, internal eth0. let's say its ip is internal_B The service listens to internal_B:5900. We open external_A:10000 for user access. I configure my iptables with the following commands: echo 1> /proc/sys/net/ipv4/ip_forward /sbin/iptables -P FORWARD ACCEPT /sbin/iptables -t nat -A POSTROUTING -j MASQUERADE /sbin/iptables -A PREROUTING -p tcp -t nat --dport 10000 -j DNAT --to-destination interal_B:5900 /sbin/iptables -A OUTPUT -p tcp -t nat -d external_A --dport 10000 -j DNAT --to-destination internal_B:5900 But it didn't work. Can anybody help me?

  Read the article

• Mac OS X & Linux: mount_nfs: can't access /nfs: Permission denied

  - by MountainX

  I have an Ubuntu 12.04 NFS server and I have an iMac NFS client running OS X 10.6.8. I believe I have everything set up properly, yet I still get this error on the Mac: mount_nfs: can't access /nfs: Permission denied My exports on the Linux server uses the insecure option like this: /export/home/me/ 192.168.100.132(rw,subtree_check,insecure,nohide) Where 192.168.100.132 is the address of my Mac. I have even tried using -o resvport on the Mac (in addition to insecure on Linux) and I still get the same error as above. $ sudo mount -t nfs -o resvport 192.168.100.1:/home/me /Users/me/mount Here is the output of showmount: # showmount -e 192.168.100.1 Export list for 192.168.100.1: /export/home/me 192.168.100.132 .... I have reviewed this similar question: How to mount NFS export on Mac OS X? And I have reviewed this frequently recommended tutorial: http://www.cyberciti.biz/faq/apple-mac-osx-nfs-mount-command-tutorial/ I still can't find a solution. Any ideas?

  Read the article

• Windows 2008 R2 server cannot access shares on other servers

  - by Rob

  I have a problem on my new 2008 R2 64-bit server. Essentially the server sometimes refuses to access shares on other server. in the format \\servernam\sharename sometime it works and then for a few hours it doesn't and then at randon it comes back online. This is a local AD network and have even put in a new gigabit switch between all server. All the old 2003 servers work fine so I know DNS and WINS is all ok. I get error 1006 in eventlog saying that my R2 server can't contact the domain controller when it clearly can. Just to add to the config, it is running on a Dell PowerEdge R410, Vmware Esxi 4.0 and R2 is configured as a terminal server. I can always view shares with FQDN This morning net view \\ did not work but net view \\ did. Very random and very frustrating. any ideas? thanks

  Read the article

• Sharepoint 2010 site access denied for Active Dirtectory group member

  - by Mia

  I created a blank site in Sharepoint 2010 and in Site Actions-->Permissions I removed all the users and added an Active directory group which has me as member and few others. After this I logged in as myself and it does not show that Portal on Left navigation. If I try to browse to that portal as myself it says "access denied"? I don't know where I am wrong. I am stuck from yesterday. If some one could help it would be great. Thanks.

  Read the article

• Internet wireless connected with limited access, windows vista

  - by r0ca

  I had some malware in my computer so I did a bit of manual work to remove it including resetting TCP/IP. Now the malware is gone. I can see my home wireless network and I can get connected to it but when connected I get the Internet wireless connected with limited access message. When I go to the IE I cannot browse. When I tried to ping 192.168.1.1 I got an Error Code 1231 Unconnected Network Problem. I have deactivated my Windows firewall as I thought it could be hyperactive security. Still no luck. I have Norton but it is not active, I have also Avast and AVG installed but they are not active. Any ideas?

  Read the article

• Firewall software that can block access to certain applications on certain internet connections

  - by webmasters

  I have two internet connections, a LAN and a 3G modem on a Windows 7 machine. The LAN is connected to a Edimax router which is conneted to the ISP (with their own modem). Now, the Edimax router is set to auto assign IP adresses in the range: 168.192.2.100 and 192.168.2.200 I wanted to block internet explorer to access the LAN. I entered my AVG firewall, selected iexplorer and added a "block" rule which blocked all ports, TCP and UDP protocols for the above IP range. The problem is it did not work, not matter what rules I have tried. Can you recommend a firewall that can easily accomplish this? Ty

  Read the article

• Allow and restrict remote sql server access

  - by Michel

  Hi, I want to expose my sql server instance via the internet. I've been programming asp.net to sql server for a long time, but for the first time i'm hosting the sql server myself instead of the clients server. So what i want to do is move my sql server from my dev machine at home to a virtual server (yet to hire). But of course i don't want anyone to just enter my sql server but just a few persons. So what i was thinking was to allow only a few ip addresses to the sql server instance. Can anyone tell me how i can expose my sql server to the internet and limit the access to the instance to only a few ip addresses? And ehm, if you know even better ways to secure it, i'd be happy, because this is the first time for me :) Michel

  Read the article

• Nginx access log shows authenticated user "admin"

  - by bearcat

  I came across a line in my Nginx access log: 218.201.121.99 - admin [12/Dec/2012:18:33:18 +0800] "GET /manager/html HTTP/1.1" 444 0 "-" "-" Let me stress that there is only 1 record with this IP. Notice the authenticated user admin. After some googling, I was able to find out only that this is authenticated user (http://wiki.nginx.org/HttpCoreModule#.24remote_user), which was authenticated by the Auth Basic Module (http://wiki.nginx.org/HttpAuthBasicModule). However, nowhere in my site (configuration) do I use HTTP basic authentication. What is going on? How did it get there? Was the user authenticated?

  Read the article

• How can give group in active directory folder access by group policy

  - by AAA-Super

  I have windows server 2003 64bit and my clients running on windows xp 32bit. My clients have user rights so they can't install any program. I have some programs needs admin rights for example I have French dictionary without admin right the program will not work properly. I don't want go to each PC and login with admin account then go to program folder located in programs files to give full permission to the group. Is there a way to add them folder in group policy so I can force all the PCs to have full access on the folder? Thanks you in advance.

  Read the article

• Software to store my password on a crypted file and access it through another password

  - by Fire-Dragon-DoL

  I'm looking for a software that allows me to store some passwords in something like "a text file", access it through a password, read my passwords if required and close it again. I want something really straightforward, double click on file, right click "Add new password", add password, description and close. The file must be really secure, I'll store all my passwords there. I know about some command line solutions but I want my setup to be really fast on reading. Do someone know if such a software exist and can point me in the correct direction? I would like to find it freeware, but I'm ok with some low cost tools too.

  Read the article

• Cannot access Windows 7 share from Windows XP

  - by artfulrobot

  I have a new Windows 7 machine named PAP44 in the PAP workgroup. The networking is set to "Work" mode for the wired LAN. I have a couple of users and I've shared a folder and set it so both users can read/write. Confusingly for me, rather than sharing just that folder (as I'm used to with older versions of Windows) it appears to be sharing a path (\\pap44\users\...\myFolder) From another machine on the LAN, running XP, when I go to \\PAP44\Users I'm asked for a username and password, but neither of the usernames+passwords work. It just jumps back to the username and password dialogue, except that the username I entered gets prefixed with PAP44\ My end goal is to get my Debian/Ubuntu machines to be able to access this share, but first of all I thought I'd try to get it working in Windows, after all, that's supposed to be easy! Is there another step? (PS. I am not a "hit and run" case!)

  Read the article

• VNC Server running on Linux machine to access all the terminals open on the Linux

  - by goldenmean

  I have a Linux Ubuntu(11.10) box at work, on which I open 4 terminals and execute different processes(my code). I run vncserver on this Linux box, so as to access it remotely. When I login to my office Windows PC using vpn, I would like to connect to this office Linux desktop using VNC Client and be able to see all the Linxu desktop which had my 4 open terminals executing the programs. How to use VNC to view Desktop of Linux PC and all the terminals associated to that which I opened to execute my programs?

  Read the article

• Can't access Administrator account on Windows XP after adding local user account

  - by bwerks

  I have an installation of windows XP, and it's not part of a domain. Previously, it just had only the administrator account, and upon creating a different user account, all access was lost to the administrator account. When the machine starts up, only the new local account is offered for login, which seemed strange. I've checked that the administrator account was not disabled, nor are any rights missing from the local security policy. Furthermore, the administrator account is accessible via remote desktop, where an opportunity is given to type the desired account. REALLY strange. Upon deletion of the new local user account, the administrator account appeared again. Can anyone tell me what's going on?

  Read the article

• Unable to delete a directory from NTFS drive: "Access is denied"

  - by Evgeny

  I'm running Windows XP Pro x64 SP2. I have a directory on an NTFS drive that was created by a Maven build. A subsequent build attempted to delete this directory and failed. I now get the error "Access is denied" whenever I try to do anything with that directory: change to it, delete it, rename it. This happens both in Windows Explorer and from a command prompt. The properties dialog in Windows Explorer doesn't even contain the Security tab. I created the directory, so I don't think this is truly a permissions issue. I've occasionally had this error happen in the past is well. I believe the error is misleading, but the question is: what is the real problem and how do I fix it?

  Read the article

• "Access Denied" error when starting Windows Security Center service

  - by Isxek

  I am working on a laptop with Windows 7 Ultimate (32-bit) which had previous issues with Microsoft Security Essentials. I've removed the previous installation of Security Essentials and reinstalled it. There's no problem with the said antivirus now, but after a couple of days it was brought back to me because of the error about Windows Security Center service not being started. I've tried setting it to start Automatically instead of "Delayed Start", but I still keep getting "Error 5: Access is Denied." I've searched other possible solutions but it's mostly been either what I did already or "Don't worry about it." Any ideas? Thanks in advance! EDIT: I've scanned the system with both Malwarebytes AM and SUPERAntiSpyware and have found no traces of anything. EDIT2: I have also tried running sfc /scannow to see if the files might be damaged. Got the message no integrity violations were found, however.

  Read the article

• Access Java based keystore directly on Sun ONE Webserver 6.1

  - by George Bailey

  The keystore seems to reside in one of /opt/SUNWwbsvr/alias/https-sub.domain.ext-hostname-cert8.db /opt/SUNWwbsvr/alias/https-sub.domain.ext-hostname-key3.db What tool would I use to access this file? I have tried these commands which did not work. /opt/SUNWwbsvr/bin/https/jdk/bin/keytool -certreq -keyalg RSA -file /tmp/test.csr -keystore /opt/SUNWwbsvr/alias/https-sub.domain.ext-hostname-cert8.db /opt/SUNWwbsvr/bin/https/jdk/bin/keytool -certreq -keyalg RSA -file /tmp/test.csr -keystore /opt/SUNWwbsvr/alias/https-sub.domain.ext-hostname-key3.db /opt/SUNWwbsvr/bin/https/jdk/bin/keytool -list -storepass password -keystore /opt/SUNWwbsvr/alias/https-sub.domain.ext-hostname-cert8.db /opt/SUNWwbsvr/bin/https/jdk/bin/keytool -list -storepass password -keystore /opt/SUNWwbsvr/alias/https-sub.domain.ext-hostname-key3.db They all gave me the error message keytool error: java.io.IOException: Invalid keystore format

  Read the article

• Grant users access to mysql with a dash in the database name

  - by Matt

  Unfortunately, I have a database name with a dash in it. How do I grant access to that database as mysql reports a syntax error. e.g. grant select,insert,update,delete on astpp.* to 'portal'@'localhost' identified by 'Ab7g12Xh35' with grant option; works, but grant select,insert,update,delete on astpp-eth01.* to 'portal'@'localhost' identified by 'Ab7g12Xh35' with grant option; Does not. Neither does: grant select,insert,update,delete on 'astpp-eth01'.* to 'portal'@'localhost' identified by 'Ab7g12Xh35' with grant option;

  Read the article

• Terminal Services - MS Access Frequently "Not Responding"

  - by jonfhancock

  Exposition: We use a program built in MS Access that I serve via Terminal Services. I just installed a new TS Server with a Quad Core 2.6GHz Xeon, 8GB RAM, and 4 SATA drives in a RAID 0. In installed Server 2008 R2 (64bit obviously). It's only role is TS. The problem: With just a few sessions (under 10), I start getting frequent Not Responding messages in each session. When it happens, the users aren't doing anything particularly taxing, just form navigation and simple insert queries. I can live with some stalls, but it is visually jarring in WS08 because the screen goes gray, and it presents a dialog offering to wait or close with some other options. Questions: Any suggestions for improving performance and reducing hangs? Is it possible to disable the dialog (always wait) and screen graying?

  Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >