Search Results

Search found 24515 results on 981 pages for '24 bit'.

Page 116/981 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• Triple monitor setup in linux

  - by Brendan Abel

  I'm hoping there are some xorg gurus out there. I'm trying to get a three monitor setup working in linux. I have 2 lcd monitors and a tv, all different resolutions. I'm using 2 video cards; a 9800 GTX and 7900Gt. I've seen a lot of different posts about people trying to make this work, and in every case, they either gave up, or Xinerama magically solved all their problems. Basically, my main problem is that I cannot get Xinerama to work. Every time I turn it on in the options, my machine gets stuck in a neverending boot cycle. If I disable Xinerama, I just have three Xorg screens, but I can't drag windows from one to the other. I can get the 2 lcds on Twinview, and the tv on a separate Xorg screen no problem. But I don't really like this solution. I'd rather have them all on separate screens and stitch them together with Xinerama. Has anyone done this? Here's my xorg.conf for reference. p.s. This took me all of 30 seconds to set up in Windows XP! p.s.s. I've seen somewhere that maybe randr can solve my problems? But I'm not quite sure how? Section "Monitor" Identifier "Main1" VendorName "Acer" ModelName "H233H" HorizSync 40-70 VertRefresh 60 Option "dpms" EndSection #Section "Monitor" # Identifier "Main2" # VendorName "Acer" # ModelName "AL2216W" # HorizSync 40-70 # VertRefresh 60 # Option "dpms" #EndSection Section "Monitor" Identifier "Projector" VendorName "BenQ" ModelName "W500" HorizSync 44.955-45 VertRefresh 59.94-60 Option "dpms" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nvidia" BusID "PCI:5:0:0" BoardName "nVidia Corporation G92 [GeForce 9800 GTX+]" Option "ConnectedMonitor" "DFP,DFP" Option "NvAGP" "0" Option "NoLogo" "True" #Option "TVStandard" "HD720p" EndSection Section "Device" Identifier "Card2" Driver "nvidia" VendorName "nvidia" BusID "PCI:4:0:0" BoardName "nVidia Corporation G71 [GeForce 7900 GT/GTO]" Option "NvAGP" "0" Option "NoLogo" "True" Option "TVStandard" "HD720p" EndSection Section "Module" Load "glx" EndSection Section "Screen" Identifier "ScreenMain-0" Device "Card1-0" Monitor "Main1" DefaultDepth 24 Option "Twinview" Option "TwinViewOrientation" "RightOf" Option "MetaModes" "DFP-0: 1920x1080; DFP-1: 1680x1050" Option "HorizSync" "DFP-0: 40-70; DFP-1: 40-70" Option "VertRefresh" "DFP-0: 60; DFP-1: 60" #SubSection "Display" # Depth 24 # Virtual 4880 1080 #EndSubSection EndSection Section "Screen" Identifier "ScreenProjector" Device "Card2" Monitor "Projector" DefaultDepth 24 Option "MetaModes" "TV-0: 1280x720" Option "HorizSync" "TV-0: 44.955-45" Option "VertRefresh" "TV-0: 59.94-60" EndSection Section "ServerLayout" Identifier "BothTwinView" Screen "ScreenMain-0" Screen "ScreenProjector" LeftOf "ScreenMain-0" #Option "Xinerama" "on" # most important option let you window expand to three monitors EndSection

  Read the article

• outlook iptables configuration

  - by mediaexpert

  I've a Debian mail server, but only the outlook users can't be able to download the emails. I've seen a lot of post about some kind of forwarding port configuration, I've tried some commands, but I don't be able to solve this problem, please help me. below INPUT and FORWARD iptables: Chain INPUT (policy DROP 20 packets, 1016 bytes) pkts bytes target prot opt in out source destination 60833 16M ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:143 state NEW,ESTABLISHED 18970 971K ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp spts:1024:65535 dpt:110 state NEW,ESTABLISHED Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT tcp -- * * 192.168.0.0/24 0.0.0.0/0 tcp dpt:110 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 192.168.1.0/24 0.0.0.0/0 tcp dpt:110 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:25 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:110

  Read the article

• routing problems

  - by user174050

  I have an windows 7 laptop and I have installed openvpn 2.2x as client. The laptop has 2 ethernet cards, one of them is wireless. The wireless lan is 192.168.1.0/24 The Fix lan is 192.168.2.0/24 If I connect to the openvpn server useing the Fix lan the I can connect properly and for testing I ping to my openvpn server 10.0.0.1 that answers correctly. But if I connect to the openvpn server useing the wireless lan, I can establish the connection but pinging to the server isn´t possible. The packets goes allways lost. Why can this happen? In an other laptop where windows xp is installed and with the same lan configuratio everything works propperly. In both cases the firewall is configured to access the vnc server and the server directories useing samba. With the XP I have no problems. I will thank you for all help Ignacio

  Read the article

• get all ip address from subnet mask

  - by Guntis

  I have this IP list shown below. How i can calculate all ip addresses from that in Linux? Is there some tools that can calculate that for me ? I need that to check if i have not banned some cloudflare IP's. As firewall i am using shorewall and i am banning with fail2ban single IP. As i know, then i cannot detect subent mask from IP adress, right? 204.93.240.0/24 204.93.177.0/24 199.27.128.0/21 173.245.48.0/20 103.22.200.0/22 141.101.64.0/18 108.162.192.0/18 190.93.240.0/20 188.114.96.0/20

  Read the article

• On Ubuntu get: "-bash: ./flume No such file or directory" BUT flume is there and executable. Same binary OK on RHEL

  - by lcbrevard

  This is already posted in serverfault - and may be more apprpriate there. Reworked a bit from the orginal posting. We have a product built on CentOS 4 32-bit Linux that runs unmodified on 32- and 64-bit CentOS/RHEL 4 and 5 and SLES 10. It also runs unmodified on SLES 9 64-bit. [SLES 9 32-bit requires a different libstdc++.] The name of the main binary executable is 'flume' Yesterday we tried to put this on 64-bit Ubuntu 10 and, even though the file is there and the right size, we get: -bash: ./flume: No such file or directory 'file flume' shows it to be a 32-bit ELF (can't remember the exact output and the system is on an isolated network) If put into /usr/local/bin, then 'which flume' returns: /usr/local/bin/flume The file is marked as executable (did 'chmod +x flume') and lsattr shows no problems with attribute bits. I was not able to try 'ldd flume' yet. I have also not tried 'strace flume'. Currently I am with an air conditioning failure. [It's been that kind of week!] I now suspect that some library is not there. This is a profoundly unhelpful message and one I have never seen before. Is this peculiar to Ubuntu or perhaps just to this installation. We gave up and moved to a RHEL 4 system and everything is fine. But I sure would like to know what causes this.

  Read the article

• What is good RAM for my CPU?

  - by Jason94

  I'm going to upgrade my RAM, but I have no clue what to look for. There is cheap and there is expensive RAM. What should I look for? What are good attributes for intel i5? The i5 CPU and motherboeard supports 1600 MHz (PC3-12800), but there is still to much to choose from. There are CL10 (10-10-10-27) @ 1.5V CL11 @ 1.35V CL9 (9-9-9-24) @ 1.5V CL9 (9-9-9-24) @ 1.65V Higher CL is better? CL is classification? And I guess a high voltage is also good since thats what overclockers do to the ram (increase the voltage)?

  Read the article

• Unable to ping between subnets and out to internet

  - by battlemidget

  My setup is Modem - Linksys router - Laptop with 2 devices (wlan0/eth0) - desktop machine Router is 192.168.1.1 gateway to the internet Laptop wlan0 is 192.168.1.4 with a gw of 192.168.1.1 Laptop eth0 is 192.168.2.254 which acts as a second gateway desktop is 192.168.2.100 On laptop i've setup ip_forward to 1, and have inserted 2 iptables rules -A FORWARD -i eth0 -o wlan0 -j ACCEPT -A FORWARD -i wlan0 -o eth0 -j ACCEPT The laptop can ping outside the network (i,e, yahoo.com) it can not ping 192.168.2.100. The desktop can ping 192.168.2.254 but nothing outside the network or 192.168.1.0 subnet. On laptop ip route show lists: 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.4 127.0.0.0/8 dev lo scope link default via 192.168.1.1 dev wlan0 What am I missing to make my desktop go through the laptop in order to access the router which provides access to the internet? Thanks

  Read the article

• nginx not returning 304 on cached content

  - by Don H

  I'm using nginx as a reverse proxy with an Apache back-end handling some PHP files. The files return the right expiry headers and proxy_cache does a good job of caching them, but I've noticed that the cached content returns a 200 on every refresh, when it might be more efficient to return a 304 on the cached files. The files in question are generated by PHP. The urls do not have .php in them as they've been prettified. Any idea why nginx might not be returning 304 on repeated visits to a cached PHP output? To clarify: It's using proxy_cache for caching dynamic PHP pages (not static html pages generated by PHP). I'm setting expires headers in the PHP file of time + 24 hours. With that in mind, I was hoping nginx would be able to then return 304s on its cached versions during that 24 hour window.

  Read the article

• Remote access to internal machine (ssh port-forwarding)

  - by MacUsers

  I have a server (serv05) at work with a public ip, hosting two KVM guests - vtest1 & vtest2 - in two different private network - 192.168.122.0 & 192.168.100.0 - respectively, this way: [root@serv05 ~]# ip -o addr show | grep -w inet 1: lo inet 127.0.0.1/8 scope host lo 2: eth0 inet xxx.xxx.xx.197/24 brd xxx.xxx.xx.255 scope global eth0 4: virbr1 inet 192.168.100.1/24 brd 192.168.100.255 scope global virbr1 6: virbr0 inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 # [root@serv05 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr1 xxx.xxx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 xxx.xxx.xx.62 0.0.0.0 UG 0 0 0 eth0 I've also setup IP FORWARDing and Masquerading this way: iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE iptables --append FORWARD --in-interface virbr0 -j ACCEPT All works up to this point. If I want to remote access vtest1 (or vtest2) first I ssh to serv05 and then from there ssh to vtest1. Is there a way to setup a port forwarding so that vtest1 can be accessed directly from the outside world? This is what I probably need to setup: external_ip (tcp port 4444) -> DNAT -> 192.168.122.50 (tcp port 22) I know it's easily do'able using a SOHO router but can't figure out how can I do that on a Linux box. Any help form you guys?? Cheers!! Update: 1 Now I've made ssh to listen to both of the ports: [root@serv05 ssh]# netstat -tulpn | grep ssh tcp 0 0 xxx.xxx.xx.197:22 0.0.0.0:* LISTEN 5092/sshd tcp 0 0 xxx.xxx.xx.197:4444 0.0.0.0:* LISTEN 5092/sshd and port 4444 is allowed in the iptables rules: [root@serv05 sysconfig]# grep 4444 iptables -A PREROUTING -i eth0 -p tcp -m tcp --dport 4444 -j DNAT --to-destination 192.168.122.50:22 -A INPUT -p tcp -m state --state NEW -m tcp --dport 4444 -j ACCEPT -A FORWARD -i eth0 -p tcp -m tcp --dport 4444 -j ACCEPT But I'm getting connection refused: maci:~ santa$ telnet serv05 4444 Trying xxx.xxx.xx.197... telnet: connect to address xxx.xxx.xx.197: Connection refused telnet: Unable to connect to remote host Any idea what's I'm still missing? Cheers!!

  Read the article

• Why is Windows 7 not following all routes?

  - by GigabyteProductions

  My computer is connected to my secondary router that's running the 192.168.42.0/24 network and my computer also has a route that directs anything on that network to the router, but for anything on that network other than the router itself, it get's the ICMP response of Reply from 192.168.42.194: Destination host unreachable. (with 192.168.42.194 being my computer). Every other network works, like all of the internet, or addresses on my primary router like 192.168.1.*, just not on the 192.168.42.0/24 network... route print returns: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.42.1 192.168.42.194 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.42.0 255.255.255.0 On-link 192.168.42.194 276 192.168.42.194 255.255.255.255 On-link 192.168.42.194 276 192.168.42.255 255.255.255.255 On-link 192.168.42.194 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.42.194 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.42.194 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.42.1 Default =========================================================================== The only time anything is supposed to send an ICMP Host Unreachable response is when there's no route to it, right? So, why is my own computer sending that to ping or tracert when I have the route of 192.168.42.0 with the mask of 255.255.255.0? An IP address of 192.168.42.2 surely fits into that route. If I explicitly add a route for the IP address i am trying to access, it works, like: route add 192.168.42.2 mask 255.255.255.255 192.168.42.1 (the 192.168.42.1 right after mask is gateway, or the device to send the packet to so it can route it further), but why wont it work for the implicit route that's automatically on the table? I disabled my firewall, too (I use Comodo if anyone thinks this still serves as a problem). I'v even tried explicitly adding the gateway of 192.168.42.1 to the 192.168.42.0/24 route instead of it routing through 0.0.0.0's gateway, which is what On-link does. but that didn't work either, so it's not a gateway specification problem. If the host was really unreachable, it would be the router's IP address (192.168.42.1) sending that to me... This network is all of my creation, so there's no problem such as an administrator locking me out, because i am the administrator.

  Read the article

• Possible HDD malfunction. Need help in diagnosing

  - by Protheus

  Today when using my PC as I did for almost 4 years I experienced the following: during opening new tab in Opera browser screen froze. Music (AIMP 3) continued to play for about 5 minutes and then stopped too. I tried Ctrl+Alt+Del, but win7 lock screen didn't appear. Caps\Scroll or Num locks didn't switch diodes on keyboard. I rebooted my PC and saw that BIOS suggests me to enter it's settings or load by default. I chose default. It don't see proper boot device (old faitful "insert proper boot" something). After second reboot it said that there is no ExpressGate installed (which i turned off in BIOS years ago). I went into BIOS setting to turn off ExpressGate and see configs: time was not set off, all hard drives present, temp and O.C. settings are nominal (no O.C.) I've inserted my Win7 install disk to try recovery. It did load awfully long (about few minutes) and didn't see current installation. PC was utilized in 24/7 mode for almost all these years. Hardware configuration: ASUS P5Q WS Core 2 Quad Q9300 (2.5GHz no O.C.) MSI geForce GTX 460 4x2 Gb GeIL EVO 2 (AFAIR) Seagate something 750Gb (4 years as system HDD 24/7) WD 1Tb (for random stuff, 5 y.o.) Hitachi 500Gb (for even more random stuff, 6 y.o.) NEC DVDRW (ALL DISKS ARE SATA) Cooler Master Silent Pro 700W Software: Windows 7 AND Kubuntu on the same drive with GRUB loader. Sorry I can't remember HDDs and can't see them right now, but I think their models aren't relevant anyway. My idea is that due to some system error or hard drive glitch i've wrecked my primary HDD's MBR. Nevertheless I don't exclude the possibility of other failure. May it's be that motherboard or it's SATA controller? Doubt it, because all drives are seen in BIOS and I could load from DVD. Maybe GRUB got bugged somehow, although I don't see how it's possible from Windows. But I did install KUbuntu from Windows (i wasn't myself then), maybe GRUB did write itself in some windows partition and got rewriteen in process? Right now I am at work with my flash drive with me and I need some advice how to fix MBR or to hear if it's not MBR. I'm going to buy new HDD (Hitachi 7k2000) because I think that my current HDD is compromised and it's unsafe to use it as system drive, especially 24/7.

  Read the article

• wireless printer - entering WPA - is there a quicker way?

  - by camcam

  I have a wireless printer (Brother DCP-585CW). The wireless setup instruction says I should enter the WPA key to the printer. The key is entered using up and down buttons on the printer. So, I am supposed to enter 64 characters using up and down buttons. To enter 1 character, it takes on average (24+10)/2 = 17 times pressing the button (digits start after 24 letters). So 17*64 = 1088 times. Is there a quicker way to setup a wireless printer? Maybe there is a Windows program that discovers printers connected to computer through USB or Ethernet (my printer has both sockets) and allows to pre-configure it for wireless usage (enter the long WPA key)? Update There is BRAdmin program and it allows to set up almost all wireless settings... almost - all except WPA :(

  Read the article

• Is there a way to replicate a very large file shares in real-time?

  - by fsckin

  I have an hourly cron job that copies about 40GB of data from a source folder into a new folder with the hour appended on the end. When it's done, the job prunes anything older than 24 hours. This data changes very often during work hours and is on a samba file share. Here's how the folder structure looks: \server\Version.1 \server\Version.2 \server\Version.3 ... \server\Version.24 The contents of each new folder compared to the last one usually doesn't change very much, since this is a hourly job. Now you might be thinking that I'm an idiot for setting dreaming this up. Truth is, I just found out. It's actually been used for years and is so incredibly simple, anyone could delete the ENTIRE 40GB share (imagine that dialog spooling up... deleting thousands and thousands of files) and it would actually be faster to restore by moving the latest copy back to the source than it took to delete. Brilliant! Now to top this off, I need to efficiently replicate this 960GB of "mostly similar" data to a remote server over WAN link, with the replication happening as close to real-time as possible -- think hot spare, disaster recovery, etc. My first thought was rsync. Total failure. Rsync sees it sees a deletion of the folder that is 24 hours old and the addition of a new folder with 30GB of data to sync! I also looked at rdiff-backup and unison, they both appear to use similar algorithms and do not keep enough meta-data to do this intelligently. Best thing that I can find "out of the box" to do this is Windows Server "Distributed Filesystem Replication" which uses "Remote Differential Compression" -- After reading the background information on how this works, it actually looks like exactly what I need. Problem: Both servers are running Linux. D'oh! One approach to this I'm looking at is this, say it's 5AM and the cron job finishes: New Version.5 folder arrives at on local server SSH to remote server and copy Version.4 to Version.5 Run rsync on the local server pushing changes to the remote server. Rsync finally knows to do a differential copy between Version.4 and Version.5 Is there a smarter way to replicate Samba shares as close to real-time as possible? Anything out there that does "Remote Differential Compression" on Linux?

  Read the article

• DELL U2410 Monitor(Display Port) & Graphic card

  - by Anj

  I was looking for a 24" monitor and bought the Dell 24" inch ultra sharp monitor which has DisplayPort( new keyword for me) seems it is equivalent to HDMI. Now I would like to enhance the display capabilities for my laptop and desktop(both have VGA output as of now). Couple of questions in mind: Is there a single HD graphic card which i could use for both desktop and laptop? I understand it has to be external but if its costly then I would stick on internal graphic card for my desktop. Please recommend external if its cost effective else I would go for internal one(Budget is around $70 or Rs 4000. Is there a HD card which I could use for both HD video and 5.1 channel audio output? I generally use the computer for office work/ listening music and watching movies, not gaming.

  Read the article

• "private" directory not accessible in Apache

  - by janeden

  The directory private lives under my DocumentRoot, and despite its name, it should be accessible just like any other dir. But if I add the following RewriteRule to httpd.conf: RewriteRule ^/([^\.]+)$ /$1.html [L] Apache returns 403 for http://server/private/2201. The error log states client denied by server configuration: /private/2201.html If I then rename private to foo, or if I request 2201.html directly, the file is served: 127.0.0.1 - - [21/Nov/2011:10:24:45 +0100] "GET /private/2201 HTTP/1.1" 403 214 127.0.0.1 - - [21/Nov/2011:10:24:58 +0100] "GET /foo/2201 HTTP/1.1" 200 3068 127.0.0.1 - - [21/Nov/2011:10:27:39 +0100] "GET /private/2201.html HTTP/1.1" 200 3068 This is confusing. Is there any special rule for directories named private? If so – why does the direct request for 2201.html work (although the denied request seems to handle the same resource, at least according to the error log entry)?

  Read the article

• AuthenticationForm - cookie cross site

  - by bit

  I've 2 web site, the first one myFirst.domain.com and the second one mySecondSite.domain.com. They stay on two different web server and my goal is allow a cross site authentication (my real need is shared authenticationForm Cookie). I've correctly setted web config (machine key node, forms node). The only different is about loginUrl where on myFirstSite appears like "~/login.aspx", instead on mySecondSite it appears like "http://myFirstSite.com/login.aspx". Note that I've not a virtual directory, I've just 2 different web apps. The problem: When I reach myFirstSite login page from mySecondSite I never get redirect from login page, it seems like if cookie doesn't being written. The following is a few of snippet about the issue: MyFirsSite: <machineKey validationKey="..." decryptionKey="..." validation="SHA1" decryption="AES" /> <authentication mode="Forms"> <forms loginUrl="login.aspx" name="authCookie" enableCrossAppRedirects="true"></forms> </authentication> <authorization> <deny users="?" /> <allow users="*"/> </authorization> MyFirstSite code behind: FormsAuthenticationTicket fat = new FormsAuthenticationTicket(1, "userName..", DateTime.Now, DateTime.Now.AddMinutes(30), true, "roles.."); string ticket = FormsAuthentication.Encrypt(fat); HttpCookie authCookie = new HttpCookie(FormsAuthentication.FormsCookieName, ticket); authCookie.Expires = fat.Expiration; authCookie.Domain = "myDomain.com"; Response.Cookies.Add(authCookie); // here other stuff about querystring checking in order to execute exact redirect, however it's not work, I always return on login page MySecondSite: <machineKey validationKey="..." decryptionKey="..." validation="SHA1" decryption="AES"/> <authentication mode="Forms"> <forms loginUrl="http://myFirstSite.domain.com/login.aspx?queryStringToIndicateUrlPage" enableCrossAppRedirects="true"></forms> </authentication> <authorization> Well, that's all. Unfortunately it doesn't works. please, don't pay attention to "queryStringToIndicateUrlPage", it's only simple workaround in order to know whether I must redirect on the same app or on the another one.

  Read the article

• Configure clients to navigate through specific wan. Pfsense

  - by leandronn

  I have a machine with a pfsense running. It is configured with three ethernet cards. LAN 192.168.2.1/21 WAN1 200.41.X.2/24 WAN2 200.41.X.3/24 ISP Gateway 200.41.X.1 This is a connection with 5 different IP addresses. WAN1 and WAN2 are directly connected to my ISP router. I need a way to configure some clients navigating through WAN1 and some through WAN2. I am new to pfsense so, please, if you can send me some examples to do this. I can add two squids if it is necessary. Thanks a lot.

  Read the article

• hash_map and stdext:: hash_map?

  - by bit-question

  Under the visual C++, we have " hash_map" and "hash_set". In g++, we have " stdext::hash_map" and " stdext::hash_set". Is there any difference in terms of their respective performance or other factors?

  Read the article

• Secondary fallback/failover network on Cisco ASA

  - by tyranitar

  In my network there is a Cisco ASA 55x0 with "inside" interface (network 192.168.79.0/24) and "outside" interface (network 89.x.x.48/29) There is this nat rule: object network NAToutside nat (inside,outside) dynamic interface and the static route route outside 0.0.0.0 0.0.0.0 89.x.x.49 1 and all ACL rules. Now I have another new outside network by another ISP called "outside2", this network is already natted and the Cisco ASA in in the network 192.168.70.0/24. I would use this network as a fallback one. So I set the nat rule: object network NAToutside2 nat (inside,outside2) dynamic interface and the static route with a different metric route outside2 0.0.0.0 0.0.0.0 192.168.70.1 2 Clearly it doesn't work: when I disconnect the outside ethernet cable no workstation can connect to the Internet throught the outside2 network... What do I need more?

  Read the article

• Create Static Library iOS Error

  - by bit-whacker

  This is FIrst time i try to create Cocoa Touch Static Library and follow these steps. Create New Project with Cocoa Touch Static Library named it By default i got single class with Demo.h and Demo.m. 2.Create a public function in .h and implement it in .m. 3.Select iOS Device and press cmd + B. 4.Copy Demo.a from products and the .h file drop it in my iOS App where i want to use it. 5.Then Import Demo.h and try to call the function that i wrote. Issue When try to Run the project showing this error. ld: warning: ignoring file /Users/Zenga/Documents/iOS/Static Library/myAppwithLib/Demo.a, file was built for archive which is not the architecture being linked (i386): /Users/Zenga/Documents/iOS/Static Library/myAppwithLib/Demo.a Undefined symbols for architecture i386: "_OBJC_CLASS_$_Demo", referenced from: objc-class-ref in ViewController.o ld: symbol(s) not found for architecture i386 clang: error: linker command failed with exit code 1 (use -v to see invocation) Please help if anyone have any idea about it.

  Read the article

• Need help configuring NAT

  - by QuinnFTW

  First of all, the router I am using is a Cisco WRVS4400N. My company runs a software which handles the MySQL database of all of their products. The software now has an e-commerce module, so I have to set up a secure tunnel from our network to the server that will be hosting our e-commerce site so that when the database is updated, the site will also be updated. The technician completeing the job said there is an IP conflict, and has asked me to NAT 192.168.0.0/24 to 192.168.115.0/24. I am not really sure how to do this, and they want to charge $150 an hour to do it for me. Can anyone help?

  Read the article

• implement the URL match in C++

  - by bit-question

  Given a list of URLs, such as a/b/e/f, b/c/d/k/g, s/e/c/d, how to match an input URL to the one in the list, for example, an input c/d should be matched to s/e/c/d, not b/c/d/k/g

  Read the article

• Oracle University has released “Oracle AIA Foundation Pack 11g: Developing Applications” in the Training on Demand format (TOD)

  - by Lionel Dubreuil

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} In this course, you will learn how to quickly develop integrations using Application Integration Architecture (AIA) Foundation Pack 11g that run on Oracle Fusion Middleware. You’ll learn to: Design and create Application Business Connector Services to integrate applications into AIA Create Enterprise Business Services to perform specific business activities Configure Guaranteed Message Delivery to ensure no loss of messages Extend Enterprise Business Objects and Application Business Connector Services to meet Corporate requirements This course is available now in Training on Demand format. Training On Demand Features are: Delivered by top instructors Video of classroom lecture, whiteboarding, labs Hands-on practice environment Ask your instructor Bonus material from product experts Why Choose On Demand? Start training within 24 hours Get full classroom content online Customize your learning experience Eliminate travel-related expenses Access anytime, anywhere 24/7 You'll find more information here.

  Read the article

• MySQL for Beginners Training-on-Demand First Hand Insight

  - by Antoinette O'Sullivan

  The MySQL for Beginners course is THE course to get you started with MySQL providing you a solid foundation in relational databases using MySQL as a learning tool. Oracle University recently released the Training-on-Demand option for this course.  Ben Krug from the MySQL product team is trying out the MySQL for Beginners Training-on-Demand course and reporting on his experience. You can follow Ben on MySQL Support Blogs. The MySQL for Beginners course is available as: Training-on-Demand: Follow streaming video of instructor delivery and perform hands-on exercises as your own pace. You can start training with 24 hours of purchase. Live-Virtual: Attend a live-instructor led class from your own desk. Hundreds of events on the schedule across timezones. In-Class: Travel to an education center to attend this instructor-led class. Some events on the schedule below:  Location  Date  Delivery Language  Warsaw, Poland  24 September 2012  Polish  Dublin, Ireland  15 October 2012  English  London, United Kingdom  11 September 2012  English  Rome, Italy  5 November 2012  Italian  Hamburg, Germany  3 December 2012  German  Lisbon, Portugal  5 November 2012  European Portugese  Amsterdam, Netherlands  10 December 2012  Dutch  Nieuwegein, Netherlands  18 February 2013  Dutch  Nairobi, Kenya  12 November 2012  English  Barcelona, Spain  5 November 2012  Spanish  Madrid, Spain  8 January 2013  Spanish  Latvia, Riga  12 November 2012  Latvian  Petaling Jaya, Malaysia  22 October 2012  English  Ottawa, Toronto and Montreal Canada  17 December 2012  English  Sao Paulo, Brazil  11 September 2012  Brazilian Portugese  Sao Paulo, Brazil  5 November 2012  Brazilian Portugese  For more information on the Authentic MySQL Curriculum, go to the Oracle University Portal - http://oracle.com/education/mysql

  Read the article

• Visual Studio 2010 Guatemala Community Launch

  - by carlone

    Bien Amig@s, el momento tan esperado ha llegado. Para dar nuevamente empuje a la Comunidad de Desarrolladores de .NET de Guatemala, hemos logrado confirmar el evento apoyados por Microsoft Guatemala. Este será un evento de 3 días en donde tendremos la oportunidad de visualizar todas las nuevas características, mejoras, tecnologías y herramientas disponibles en Visual Studio 2010. Cuando: Las sesiones se llevarán a cabo los días 23,24 y 25 de Junio del 2010 Donde: En las oficinas de Microsoft Guatemala 3a Avenida 13-78 Zona 10 Torre City Bank Off. 1101 Guatemala City Guatemala Costo: $0, si NADA, solo tu entusiasmo, participación y apoyo para el evento.   Temas: Silverlight/WPF 4.0 Development Session              23 de Junio Office Sharepoint Development Session                 24 de Junio ASP.NET and Web Development Session                25 de Junio   Give Aways: Si…., habrán sorpresas para los asistentes, así como también podremos compartir una pizza, alitas de pollo y más ….   Como me Inscribo para participar:   Muy simple, visita la siguiente página http://vs2010gt.eventbrite.com/ y listo.   Riega la Bola!, invita a tu colega, a tu amigo geek, la mara de la U, a los de la Office, es una única oportunidad que no te puedes perder. Esperamos contar con tu participación !!!!!!!!!!!!!!!   Saludos Cordiales, Carlos A. Lone sigueme en Twitter: @carloslonegt

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >