Search Results

Search found 6599 results on 264 pages for 'me myself and i'.

Page 116/264 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• Intel graphic chipset and NVIDIA Geforce GTX560

  - by antoine

  I have an NVIDIA Geforce GTX560 with two video projectors and I would like to use the onboard Intel Graphic Chipset to plug an additional monitor. I saw the question : How can I use both Intel onboard and Nvidia graphics at the same time? but the answer is so short that I was not convinced. My motherboard (GIGABYTE GA-H61M-D2P-B3 (rev. 1.0)) equipped with Intel H61 Chipset allow shared memory between onboard and PCIe cards. And Windows 7 allow me to use the three outputs thanks to Intel's driver. I'm able to use the onboard graphic card but without graphical interface for now. I think i need intel driver for that. But I would like to know if I can setup my displays in xorg.conf with something like : Section "Device" Identifier "Device0" Driver "intel" EndSection Section "Device" Identifier "Device1" Driver "nvidia" EndSection Section "Device" Identifier "Device2" Driver "nvidia" EndSection Does anyone have successfully setup something like that ? Or should I burn my head experimenting it by myself ? Or is there any good reasons to discouraged me to try ? Thanks for your help. Antoine PS : i'm using Ubuntu 10.10 for now, but I could switch to another version. PS2 : i also read this : Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10? which doesn't tell me more about the possibilities to use Intel Graphic and Nvidia at the same time EDIT : according to that : Can not get Dual Monitors to work on Different GPUs, I should be able to run two Xserver one on Intel the other on Nvidia. I will try and post the result here.

  Read the article

• Learning Electronics & the Arduino Microcontroller

  - by Chris Williams

  Lately, I've had a growing interest in Electronics & Microcontrollers. I'm a loyal reader of Make Magazine and thoroughly enjoy seeing all the various projects in each issue, even though I rarely try to make any of them. I've been reading and watching videos about the Arduino, which is an open source Microcontroller and software project that the people at Make (and a lot of other folks) are pretty hot about. Even the prebuilt hardware is remarkably inexpensive , although there are kits available to build one from the base components. (Full disclosure: I bought my first soldering iron... EVER... just last week, so I fully acknowledge the likelihood of making some mistakes. That's why I'm not trying to do the "build it yourself" kit just yet. It's also another reason to be happy the hardware is so cheap.) There are a number of different Arduino boards available, but the two that have really piqued my interest are the Arduino UNO and the NETduino. The UNO is a very popular board, with a number of features and is under $35 which means I won't hurl myself off a bridge when I inevitably destroy it. The NETduino is very similar to the Arduino UNO and has the added advantage of being programmable with... you guessed it... C#. I'm actually ordering both boards and some miscellaneous other doodads to go with them.  There are a few good websites for this sort of thing, including www.makershed.com and www.adafruit.com. The price difference is negligible, so in my case, I'm ordering from Maker Shed (the Make Magazine people) because I want to support them. :) I've also picked up a few O'Reilly books on the subject which I am looking forward to reading & reviewing: Make: Electronics, Arduino: A Quick Start Guide and Getting Started With Arduino (all three of which arrived on my doorstep today.) This ties in with my "learn more about robotics" goals as well, since I'll need a good understanding of Electronics if I want to move past Lego Mindstorms eventually.

  Read the article

• Xmonad Xsession

  - by AntLord

  My user level: noob-ish, so please bear with me I'm running 12.04 LTS. I have installed and, to some extent, configured xmonad 0.10 The "automagically" created xsession for it works fine as it is, but when I login it won't run a startup script I've created and "call from" /usr/share/xsessions/xmonad.desktop, if that's right. I've read pretty much all I could find about .xinitrc and .xsession, I tried that and it somehow messed up the other "sessions", if I'm explaining myself correctly. Had to $unity --reset to have the "main session" working again. Anyway, my question is, how do I autostart xmobar and set a desktop background after login into xmonad's default Xsession? I tried this script, start-xmonad: #!/bin/bash # #I only used one of the following each time I tried, none worked #Also, do I really need the '&'? I know what they're for, but... nitrogen --restore & feh --bg-scale ~/Pictures/picture.png & #Then I want xmobar to start, again do I need the '&'? I know it's for it to run #in the background, but I tried removing the '&' and xmonad still launched xmobar & #Finally, the only thing that seems to work in this script exec xmonad Yes, I made sure I did chomd +x ~/start-xmonad The xmonad.desktop is [Desktop Entry] Name=XMonad Encoding=UTF-8 Comment=Lightweight tiling window manager Exec=/home/myusername/start-xmonad Icon=custom_xmonad_badge.png Type=XSession So, this didn't work, now I'm here. Please help :s thanks

  Read the article

• Libgdx ParallaxScrolling and TiledMaps

  - by kirchhoff

  I implemented ParallaxScrolling for my SideScroller project, everything is working but the tiled map (the most important part!). I've been trying out everything but it doesn't work (see the code below). I'm using ParallaxCamera from GdxTests, it's working perfectly for the background layers. I can't explain myself properly in english, so I recorded 2 videos: Before parallaxScrolling After parallaxScrolling As you can see, now the platforms appear in the middle of the Y-axis. I've got a Map class with 2 tiled maps, so I need two renderers too: private TiledMapRenderer renderer1; private TiledMapRenderer renderer2; public void update(GameCamera camera) { renderer1.setView(camera.calculateParallaxMatrix(1f, 0f), camera.position.x - camera.viewportWidth / 2, **camera.position.y - camera.viewportHeight/2**, camera.viewportWidth, camera.viewportHeight); renderer2.setView(camera.calculateParallaxMatrix(1f, 0f), camera.position.x - camera.viewportWidth / 2, **camera.position.y - camera.viewportHeight/2**, camera.viewportWidth, camera.viewportHeight); } In bold, the code I think I should change. I've tried changing parameters, even adding hardcoded values, etc, but one of two: 1. Nothing happens. 2. Platforms disappear. Here is some aditional code. The render method: world.update(delta); parallaxBackground.update(camera); clear(0.5f, 0.7f, 1.0f, 1); batch.setProjectionMatrix(camera.calculateParallaxMatrix(0, 0)); batch.disableBlending(); batch.begin(); batch.draw(background, -(int)background.getRegionWidth()/2, -(int)background.getRegionHeight()/2); batch.end(); batch.enableBlending(); parallaxBackground.draw(batch, camera); renderer.render(batch);

  Read the article

• 'Xojo' is the only application that I can't install

  - by Gichan

  I can't install xojo. When I click install in the software center it's not progressing. In the terminal it's stuck in : gichan02@gichan02-Latitude-D520:~$ sudo apt-get install xojo [sudo] password for gichan02: Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: xojo-bin The following NEW packages will be installed: xojo xojo-bin 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 209 MB/209 MB of archives. After this operation, 596 MB of additional disk space will be used. Do you want to continue? [Y/n] Y 0% [Working] then after waiting for an hour for progress it says: Failed to fetch https://private-ppa.launchpad.net/commercial-ppa-uploaders/xojo/ubuntu/pool/main/x/xojo/xojo-bin_2013.41-0ubuntu1_i386.deb Could not resolve host: private-ppa.launchpad.net So I added apt repository for 'private-ppa': deb https://ging-giana:[email protected]/commercial-ppa-uploaders/xojo/ubuntu trusty main Then when I try 'apt-get update': GPG error: https://private-ppa.launchpad.net trusty Release: The following signatures were invalid: NODATA 2 Then I noticed something the Software Sources:Other software TAB: Added by software-center; credentials stored in /etc/apt/auth.conf https://private-ppa.launchpad.net/commercial-ppa-uploaders/xojo/ubuntu So i go to the '/etc/apt/auth.conf' ,but It cannot be opened and it is not a keyserver. So i uncheck: Added by software-center; credentials stored in /etc/apt/auth.conf https://private-ppa.launchpad.net/commercial-ppa-uploaders/xojo/ubuntu GPG error was gone. But then again I found myself at the beginning of the problem.STUCK at '0% [Working]'. 'Xojo' is the only application that I can't install.Any explanation why is it like that?

  Read the article

• Antenna Aligner Part 3: Kaspersky

  - by Chris George

  Quick one today. Since starting this project, I've been encountering times where Nomad fails to build my app. It would then take repeated attempts at building to then see a build go through successfully. Rob, who works on Nomad at Red Gate, investigated this and it showed that certain parts of the message required to trigger the 'cloud build' were not getting through to the Nomad app, causing the HTTP connection to stall until timeout. After much scratching heads, it turns out that the Kaspersky Internet Security system I have installed on my laptop at home, was being very aggressive and was causing the problem. Perhaps it's trying to protect me from myself? Anyway, we came up with an interim solution why the Nomad guys investigate with Kaspersky by setting Visual Studio to be a trusted application with the Kaspersky settings and setting it to not scan network traffic. Hey presto! This worked and I have not had a single build problem since (other than losing internet connection, or that embarrassing moment when you blame everyone else then realise you've accidentally switched off your wireless on the laptop).

  Read the article

• Xna GS 4 Animation Sample bone transforms not copying correctly

  - by annonymously

  I have a person model that is animated and a suitcase model that is not. The person can pick up the suitcase and it should move to the location of the hand bone of the person model. Unfortunately the suitcase doesn't follow the animation correctly. it moves with the hand's animation but its position is under the ground and way too far to the right. I haven't scaled any of the models myself. Thank you. The source code (forgive the rough prototype code): Matrix[] tran = new Matrix[man.model.Bones.Count];// The absolute transforms from the animation player man.model.CopyAbsoluteBoneTransformsTo(tran); Vector3 suitcasePos, suitcaseScale, tempSuitcasePos = new Vector3();// Place holders for the Matrix Decompose Quaternion suitcaseRot = new Quaternion(); // The transformation of the right hand bone is decomposed tran[man.model.Bones["HPF_RightHand"].Index].Decompose(out suitcaseScale, out suitcaseRot, out tempSuitcasePos); suitcasePos = new Vector3(); suitcasePos.X = tempSuitcasePos.Z;// The axes are inverted for some reason suitcasePos.Y = -tempSuitcasePos.Y; suitcasePos.Z = -tempSuitcasePos.X; suitcase.Position = man.Position + suitcasePos;// The actual Suitcase properties suitcase.Rotation = man.Rotation + new Vector3(suitcaseRot.X, suitcaseRot.Y, suitcaseRot.Z); I am also copying the bone transforms from the animation player in the Person class like so: // The transformations from the AnimationPlayer Matrix[] skinTrans = new Matrix[model.Bones.Count]; skinTrans = player.GetBoneTransforms(); // copy each transformation to its corresponding bone for (int i = 0; i < skinTrans.Length; i++) { model.Bones[i].Transform = skinTrans[i]; }

  Read the article

• AsyncBridge? Async on .NET 4.0 using VS11

  - by Alex.Davies

  I've just found something quite cool. It's a code snippet that lets you use the real VS 11 C#5 compiler to write code that uses the async and await keywords, but to target .NET 4.0. It was published by Daniel Grunwald (from SharpDevelop).That means I can stop using the Async CTP for VS2010, which is not at all supported anymore, and a pain to install if you have windows updates turned on. Obviously I couldn't ask all my users to install .NET 4.5 beta, but .NET Demon is a VS 2010 extension, so we already have .NET 4.0. At the time of writing, VS11 is in beta still, but hopefully it's stable enough for my team to use!I would have written the code myself, but I had the wrong impression that the C# 5 beta compiler only looked in mscorlib for the helper classes it needs to implement async methods. Turns out you can provide them yourself. You can get the code here: https://gist.github.com/1961087You just add it to your project, and the compiler will apparently pick it up and use it to implement async/await. I'm at my parents' place for Easter without access to a machine with VS 11 to try it out. Let me know whether you get it to work!This reminds me of LINQBridge, which let us use C# 3 LINQ, but only require .NET 2. We should stick up a webpage to explain, with a nice easy dll, put it in nuget, and call it AsyncBridge.If you were really enthusiastic, you could re-implement the skeleton of the Task Parallel Library against .NET 2 to use async/await without even requiring .NET 4. Our usage stats suggest that practically everyone that uses Red Gate tools already has .NET 4 installed though, so I don't think I'll go to the effort.

  Read the article

• Many small scripts, one repository or multiple?

  - by The Jug

  A co-worker and myself have run into an issue that we have multiple opinions on. Currently we have a git repository that we are keeping all of our cronjobs in. There are about 20 crons and they are not really related except for the fact that they are all small python scripts and essential for some activity. We are using a fabric.py file to deploy and a requirements.txt file to manage requirements for all of the scripts. Our issue is basically, do we keep all of these scripts in one git repository or should we be separating them out into their own repositories? By keeping them in one repository it is easier to deploy them onto one server. We can use just one cron file for all the scripts. However this feels wrong, as the 20 cronjobs are not logically related. Additionally, when using one requirements.txt file for all the scripts, it's hard to figure out what the dependencies are for a particular script and they all have to use the same versions of packages. We could separate all of the scripts out into their own repositories but this creates 20 different repositories that need to be remembered and dealt with. Most of these scripts are not very large and that solution seems to be overkill. A related question is, do we use one big crontab file for all cronjobs, or a separate file for each? If each has their own, how does one crontab's installation avoid overwriting the other 19? This also seems like a pain as there would then by 20 different cron files to keep track of. In short, our main question and issue is do we keep them all closely bundled as one repository or do we separate them out into their own repository with their own requirements.txt and fabfile.py? We feel like we're also probably looking over some really simple solution. Is there an easier way to deal with this issue?

  Read the article

• from MS Biology to BS Computer Science [on hold]

  - by Air Borne

  I'm Marco from Italy and I'd like to ask you a piece of advice about my career. I hold a Ms degree in Biology, I enjoyed a lot studying it and I got very good grades but I didn't know what to do with my degree in the real life. Few months ago, I began to read a book about Python programming (Introduction to Computer Science, Zelle J.) and I've great fun learning Python as a beginner, I wake up in the morning thinking about doing excersies and writing simple programs with python :) I'm also watching free lectures from MIT open courseware, and I'm feeling a certain degree of regrets for never asking myself what was computer science, since it seems to me it's a magic world. After weeks of doubts, I made a move :) I applied for a CS bachelor degree abroad, I got an interview and I'm going to start this great adventure next September. I feel incredibly excited at it, but a little bit scared too. Scared because sometimes I think I'm making a great mistake for my life restarting from a bachelor in a completely different area of study. Sometimes I hear people saying the IT market is bad, sometimes I hear other ones saying quite the opposite instead. Moreover, some colleagues of mine suggested me to try to get into Bioinformatics, instead of CS. My question is: I want to really discover if CS is for me, I mean the passion of my life. I know I'm just a beginner and I can't say nothing about it yet. What do you suggest me: CS or Bioinformatics? If I get a Bs in CS, could I get into bioinformatics without relevant experience, taking into account I have a Ms Biology degree? Any comment is appreciated, thanks in advance.

  Read the article

• MSDN / TechNet Key Importer for KeePass 2

  - by Stacy Vicknair

  If you have an MSDN account and, like me, systematically claim keys just as well as you systematically forget which keys you’ve used in which test environments! Well, in a meager attempt to help myself track my keys I created an importer for KeePass 2 that takes in the XML document that you can export from MSDN and TechNet. The source is available at https://github.com/svickn/MicrosoftKeyImporterPlugin.   How do I get my KeysExport.xml from MSDN or TechNet? Easy! First, in MSDN, go to your product keys. From there, at the top right select Export to XML. This will let you download an XML file full of your Microsoft Keys.   How do I import it into KeePass 2? The instructions are simple and available in the GitHub ReadMe.md, so I won’t repeat them. Here is a screenshot of what the imported result looks like:   As you can see, the import process creates a group called Microsoft Product Keys and creates a subgroup for each product. The individual entries each represent an individual key, stored in the password field. The importer decides if a key is new based on the key stored in the password, so you can edit the notes or title for the individual entries however you please without worrying about them being overwritten or duplicated if you re-import an updated KeysExport.xml from MSDN! This lets you keep track of where those pesky keys are in use and have the keys available anywhere you can access your KeePass database!   Technorati Tags: KeePass,KeePass 2,MSDN,TechNet

  Read the article

• What did programmers do before variable scope, where everything is global?

  - by hydroparadise

  So, I am having to deal with seemingly archiac language (called PowerOn) where I have a main method, a few datatypes to define variables with, and has the ability to have sub-procedures (essentially void methods) that does not return a type nor accepts any arguements. The problem here is that EVERYTHING is global. I've read of these type of languages, but most books take the aproach "Ok, we use to use a horse and cariage, but now, here's a car so let's learn how to work on THAT!" We will NEVER relive those days". I have to admit, the mind is struggling to think outside of scope and extent. Well here I am. I am trying to figure out how to best manage nothing but global variables across several open methods. Yep, even iterators for for loops have to be defined globaly, which I find myself recycling in different parts of my code. My Question: for those that have this type experience, how did programmers deal with a large amount of variables in a global playing field? I have feeling it just became a mental juggling trick, but I would be interested to know if there were any known aproaches.

  Read the article

• GLSL billboard move center of rotation

  - by Jacob Kofoed

  I have successfully set up a billboard shader that works, it can take in a quad and rotate it so it always points toward the screen. I am using this vertex-shader: void main(){ vec4 tmpPos = (MVP * bufferMatrix * vec4(0.0, 0.0, 0.0, 1.0)) + (MV * vec4( vertexPosition.x * 1.0 * bufferMatrix[0][0], vertexPosition.y * 1.0 * bufferMatrix[1][1], vertexPosition.z * 1.0 * bufferMatrix[2][2], 0.0) ); UV = UVOffset + vertexUV * UVScale; gl_Position = tmpPos; BufferMatrix is the model-matrix, it is an attribute to support Instance-drawing. The problem is best explained through pictures: This is the start position of the camera: And this is the position, looking in from 45 degree to the right: Obviously, as each character is it's own quad, the shader rotates each one around their own center towards the camera. What I in fact want is for them to rotate around a shared center, how would I do this? What I have been trying to do this far is: mat4 translation = mat4(1.0); translation = glm::translate(translation, vec3(pos)*1.f * 2.f); translation = glm::scale(translation, vec3(scale, 1.f)); translation = glm::translate(translation, vec3(anchorPoint - pos) / vec3(scale, 1.f)); Where the translation is the bufferMatrix sent to the shader. What I am trying to do is offset the center, but this might not be possible with a single matrix..? I am interested in a solution that doesn't require CPU calculations each frame, but rather set it up once and then let the shader do the billboard rotation. I realize there's many different solutions, like merging all the quads together, but I would first like to know if the approach with offsetting the center is possible. If it all seems a bit confusing, it's because I'm a little confused myself.

  Read the article

• How long can you be out of the MS market before it affects your career [closed]

  - by dave

  I've been working with .Net since it first came out and have done my best to use the latest and greatest things from Redmond. That being said, I've been working for the past year in the Python/Unix/Web world. In order to keep myself relevant in the MS world, I've been working part-time on a WPF project but I do not know how much longer that work will continue. So my question is: If I were to move totally to the Unix/Python/Web world, how long could I stay there before it starts getting hard to get another MS job? I am trying not to burn bridges in my career as I've found MS jobs pay better and tend to be more plentiful. PS: I like my Python job since it is something new and I get to work from home. It has provided a different view on coding that I've found useful. EDIT: I was out of the MS market for 12 months before attempting to get another MS job. No-one said "Gee you've been gone a while" but I did get a conspicuous lack of responses to job applications. My feeling is that the head-hunters do not bother to look beyond your last job. In the end, I got employment via my own network rather than the pimps. So, to answer my question: "not long, especially if you trust your career to head hunters."

  Read the article

• Transitioning from a mechanical engineer to software developer. What path to take?

  - by Patrick

  Hi all, I am 24 years old and have a BS in mechanical engineering from Mizzou. I have been working as a mechanical engineer in a big corporation for about 2 years since graduation. In this time, I have decided that I'm just not that interested in mechanical engineering topics, and I'm much more excited about web technology, website design, etc. I do a very small amount of freelance web design just to get experience, but I have no formal training yet. Ultimately I could see myself being very excited about working for a small startup in web technology, or creating and selling my own programs in more of an entrepreneurial role. What path do you recommend for transitioning into this field? Go back to school and get a BS in CS? MS in CS? Tech school for classes? Self study? I'm feeling overwhelmed by the options available, but the one thing I know for sure is that I'm excited to make a change. Thanks!

  Read the article

• What are the most commonly used and basic Apache htaccess redirects?

  - by bybe

  This question is here so we can offer users who are looking for information on how to make one or more common or basic redirects in Apache using the htaccess file. All future questions pertaining to finding information that is that is covered by the question should be closed as a duplication of this question. As per this Meta question. Whats the point in this question? The idea while not perfect is catch the most commonly asked questions regarding redirects using the htaccess on the Apache platform either on some type of lamp or a live server. The type of answers should be generally those that you could imagine are used by 100,000’s of sites world-wide and are constantly asked here at Pro Webmasters repeatedly over and over in various forms. A few examples of the type of answers we are looking for: How can I redirect non-www to www? How can I redirect a sub domain to the main domain? How can I redirect a sub folder from domain to a root or a subdomain? How can I redirect an old URL to a new URL? A few examples of the types of answers that we are not looking for: Answers that do not involve a redirect. Any answers relating to NGinx, IIS or any other non-Apache platform. Answers that involve custom and complex string or query removals. Resources for Advanced to Complex Mod_Rewrite Rules: Everything you ever wanted to know about mod rewrite rules but were afraid to ask Please note: that this question is still in construction and may need some refining either by myself or a real moderator of Pro Webmasters, if you have any concerns or questions please use the meta page I made a few days back here.

  Read the article

• Custom field names in Rails error messages

  - by Madhan ayyasamy

  The defaults in Rails with ActiveRecord is beautiful when you are just getting started and are created everything for the first time. But once you get into it and your database schema becomes a little more solidified, the things that would have been easy to do by relying on the conventions of Rails require a little bit more work.In my case, I had a form where there was a database column named “num_guests”, representing the number of guests. When the field fails to pass validation, the error messages is something likeNum guests is not a numberNot quite the text that we want. It would be better if it saidNumber of guests is not a numberAfter doing a little bit of digging, I found the human_attribute_name method. You can override this method in your model class to provide alternative names for fields. To change our error message, I did the followingclass Reservation ... validates_presence_of :num_guests ... HUMAN_ATTRIBUTES = { :num_guests = "Number of guests" } def self.human_attribute_name(attr) HUMAN_ATTRIBUTES[attr.to_sym] || super endendSince Rails 2.2, this method is used to support internationalization (i18n). Looking at it, it reminds me of Java’s Resource Bundles and Spring MVC’s error messages. Messages are defined based off a key and there’s a chain of look ups that get applied to resolve an error’s message.Although, I don’t see myself doing any i18n work in the near-term, it is cool that we have that option now in Rails.

  Read the article

• Using EC2 instance as main development platform

  - by David

  My problem I am working as a consultant for various companies. Each company provides me with a laptop where with their software on and I also have my own where I have my development environment. I tend to buy a new laptop every second year and find myself spending lots of time configuring and installing software. I also sometimes spend a lot of time waiting for my laptop to process things. To solve all these issues, I am now considering using EC2 (running windows instances) as my main development platform and just access this from any PC I happen to be at. I calculated that running the High-CPU On-Demand Instances (medium) for 8 hours a day for a year costs me 580$, which is acceptable. I imagine that when I approach the workplace each day, I will make a single click my phone to fire up the instance, so it is ready when I get to work. I should have different icons on my phone to fire up the various instance types. The same software should of course automatically be loaded on the various hardware (sometimes I would even need their instance with 68.4 GB of memory). Another advantage is that if I am having a specific problem with my instance, I could fire up another instance and have someone look into the problem and update the image. My question: Does anyone have experience with such a setup on EC2? What kind of problems do you forsee?

  Read the article

• Tracking feature requests for small-scale components

  - by DXM

  I'm curious how other development teams (especially those that work in moderate to large development groups) track "future" features/wishlists for functionality for internally developed frameworks or components. I know the standard advice is that a development team should find one good tool for tracking bugs/features and use that for everything and I agree with that if the future requests are for the product itself. In my company we have an engineering department, which is broken up into multiple groups and within each there can be one to several agile teams. The bug tracking product we use has been "a leader since 1997" (their UI/usability seems to also be evaluated against that year even today) but my agile team or even group doesn't really control what is being used by the whole department. What we are looking to track is not necessarily product features but expansion/nice to have functionality for internal components that go into our product. So to name a few for example... framework/utility library on top of CppUnit which our developers share low-level IPC communications framework Common development SDK that myself and several other team leads started to help share some common code/tools at the department-wide level (this SDK is released as internal "product" to each of the groups). Is the standard practice to use the one bug tracking tool? Or would it make more sense to setup something more localized specifically for our needs and maintain it ourselves? It's also unclear how management will feel if developers start performing "IT" roles of maintaining software and servers. At the same time, right now, we use excel files, internal wiki and MS OneNote for this kind of stuff and that just doesn't feel right. (I'm afraid to ask for actual software recommendations, since that might make this question more localized or something. Also developers needs this way more than management, so it would be nice to find something either free or no more than the cost of a happy hour).

  Read the article

• Cleaning your BizTalk Build Server

  - by Michael Stephenson

  Just a little note for myself this one.At one of my customers where it is still BizTalk 2006 one of the build servers is intermittently getting issues so I wanted to run a script periodically to clean things up a little.  The below script is an example of how you can stop cruise control and all of the biztalk services, then clean the biztalk databases and reset the backup process and then click everything off again.This should keep the server a little cleaner and reduce the number of builds that occasionally fail for adhoc environmental issues.REM Server Clean ScriptREM =================== REM This script is ran to move the build server back to a clean state echo Stop Cruise Controlnet stop CCService echo Stop IISiisreset /stop echo Stop BizTalk Servicesnet stop BTSSvc$<Name of BizTalk Host><Repeat for other BizTalk services> echo Stop SSOnet stop ENTSSO echo Stop SQL Job Agentnet stop SQLSERVERAGENT echo Clean Message Boxsqlcmd -E -d BizTalkMsgBoxDB -Q "Exec bts_CleanupMsgbox"sqlcmd -E -d BizTalkMsgBoxDB -Q "Exec bts_PurgeSubscriptions"  echo Clean Tracking Databasesqlcmd -E -d BizTalkDTADb -Q "Exec dtasp_CleanHMData" echo Reset TDDS Stream Statussqlcmd -E -d BizTalkDTADb -Q "Update TDDS_StreamStatus Set lastSeqNum = 0" echo Force Full Backupsqlcmd -E -d BizTalkMgmtDB -Q "Exec sp_ForceFullBackup" echo Clean Backup Directorydel E:\BtsBackups\*.* /q  echo Start SSOnet start ENTSSO echo Start SQL Job Agentnet start SQLSERVERAGENT echo Start BizTalk Servicesnet start BTSSvc$<Name of BizTalk Host><Repeat for other BizTalk services> echo Start IISiisreset /start echo Start Cruise Controlnet start CCService

  Read the article

• Which programming language should i choose? (much more info inside) [closed]

  - by Andreas

  I am not completely sure if this is the right place to put this question, but since it's the programming thread I guessed that there's many experienced programmers here. :) Ok, hello! My name is Andreas and I am a 16 years old guy from Norway. For some time now I've wanted to learn a programming language. Six months ago I started learning C++, but quit withing a week due to lack of motivation. The same thing happend only 2 months ago when I tried to learn Lua. I wanted to program mods to the game Garry's mod, and was really motivated. Then I stopped playing the game, and the programming stopped with it. Today though I am ready again. The only difference is that I am not completely sure what I want to do with the language. I only want to create something, and I miss the progress of failing and enduring hard work until I finally solve the problem I've worked on for hours. What I am trying to say is; Is there any program out there that allows me, a complete noob (I didn't learn that much in a week, so I like to call myself a beginner), to create apps, mods or something similar but at the same time being qualified as a first time language? I was thinking of Java, because Android, Minecraft and many other applications and games use it. But I've heard that it is going to be replaced by a program called HTML 5 (whatever that is), is this true? I certainly don't want to spend many hours of my life on something that is useless in a year or two. Hopefully I didn't make this too complicated. I know that it is hard to recommend something when I don't have a goal, but I really don't know what to say. Have a good day kind folks! - Andreas EDIT:* I did not know that this was an off topic question, really sorry!

  Read the article

• Thinking skills to be a good programmer

  - by Paul

  I have been programming for last 15 years with non-CS degree. Main reason I got into programming was that I liked to learn new things and apply them to my work. And I was able to find and fix programming errors and their causes faster than others. But I never find myself a a guru or an expert, maybe due to my non-CS major. And when I saw great programmers, I observed they are very good, much better than me of course, at solving problems. One skill I found good in my mid-career is thinking of requirements and tasks in a reverse order and in abstract. In that way, I can see what is really required for me to do without detail and can quickly find parts of solution that already exist. So I wonder if there are other thinking skills to be a good programmer. I've followed Q&As below and actually read some of books recommended there. But I couldn't really pickup good methods directly applicable for my programming work. What non-programming books should a programmer read to help develop programming/thinking skills? Skills and habits to develop to be good at programming (I'm a newbie)

  Read the article

• PerlRegEx vs RegularExpressionsCore Delphi Units

  - by Jan Goyvaerts

  The RegularExpressionsCore unit that is part of Delphi XE is based on the latest class-based PerlRegEx unit that I developed. Embarcadero only made a few changes to the unit. These changes are insignificant enough that code written for earlier versions of Delphi using the class-based PerlRegEx unit will work just the same with Delphi XE. The unit was renamed from PerlRegEx to RegularExpressionsCore. When migrating your code to Delphi XE, you can choose whether you want to use the new RegularExpressionsCore unit or continue using the PerlRegEx unit in your application. All you need to change is which unit you add to the uses clause in your own units. Indentation and line breaks in the code were changed to match the style used in the Delphi RTL and VCL code. This does not change the code, but makes it harder to diff the two units. Literal strings in the unit were separated into their own unit called RegularExpressionsConsts. These strings are only used for error messages that indicate bugs in your code. If your code uses TPerlRegEx correctly then the user should not see any of these strings. My code uses assertions to check for out of bounds parameters, while Embarcadero uses exceptions. Again, if you use TPerlRegEx correctly, you should never get any assertions or exceptions. The Compile method raises an exception if the regular expression is invalid in both my original TPerlRegEx component and Embarcadero’s version. If your code allows the user to provide the regular expression, you should explicitly call Compile and catch any exceptions it raises so you can tell the user there is a problem with the regular expression. Even with user-provided regular expressions, you shouldn’t get any other assertions or exceptions if your code is correct. Note that Embarcadero owns all the rights to their RegularExpressionsCore unit. Like all the other RTL and VCL units, this unit cannot be distributed by myself or anyone other than Embarcadero. I do retain the rights to my original PerlRegEx unit which I will continue to make available for those using older versions of Delphi.

  Read the article

• Submitting software to a competition, it becomes their property?

  - by myrkos

  So I'm about to submit a game to a competition, but as I looked through the rules a chunk grabbed my attention: All Entries become the sole and exclusive property of Sponsor and will not be acknowledged or returned. Sponsor shall own all right, title and interest in and to each Entry, including without limitation all results and proceeds thereof and all elements or constituent parts of Entry (including without limitation the Mobile App, the Design Documents, the Video Trailer, the Playable and all illustrations, logos, mechanicals, renderings, characters, graphics, designs, layouts or other material therein) and all copyrights and renewals and extensions of copyrights therein and thereto. Without limitation of the foregoing, each Eligible Entrant shall and hereby does absolutely and irrevocably assign and transfer all of his or her right, title and interest in his or her Entry to Sponsor, and Sponsor shall have the right and may authorize others to use, copy, sublicense, transmit, modify, manipulate, publish, delete, reproduce, perform, distribute, display and otherwise exploit the Entry (and to create and exploit derivative works thereof) in any manner, including without limitation to embody the Entry, in whole or in part, in apps and other works of any kind or nature created, developed, published or distributed by Sponsor and to and register as a trademark in any country in Sponsor’s name any component of the Entry, without such Eligible Entrant reserving any rights or claims with respect thereto. Sponsor shall have the exclusive right, in perpetuity, throughout the Territory to change, adapt, modify, use, combine with other material and otherwise exploit the Entry in all media now known or hereafter devised and in any manner, in its sole and absolute discretion, without the need for any payment or credit to Entrant. So the game will become the sponsor's property; however, they don't ask for source code. So will I still own the rights to the source code, whatever that means? And if it doesn't win said competition, will I be able to publish it myself without their trademarks? I am very new to software legality stuff, so I would appreciate any clarification. Since there's a possibility I won't even own the source, is it possible to make the game core engine open source software with a not-very-restrictive license and include that in the project, so I at least still own the game engine? Or does it not work that way?

  Read the article

• Using EC2 instance as main development platform

  - by David

  My problem I am working as a consultant for various companies. Each company provides me with a laptop with their software on and I also have my own, where I have my development environment. I tend to buy a new laptop every second year and find myself spending lots of time configuring and installing software. I also spend a lot of time waiting for my laptop to process things. To solve all these issues, I am now considering using EC2 (running windows instances) as my main development platform and just access this from any PC I happen to be at. I calculated that running the Large instance (cheapest 64-bit) for 8 hours a day for a year costs me 960$ per year, which is acceptable. I imagine that when I approach the workplace each day, I will make a single tap on my phone to fire up the instance, so it is ready when I get to work. I should have different icons on my phone to fire up the various instance types. The same software should of course automatically be loaded on the various hardware (sometimes I would even need their instance with 68.4 GB of memory). Another advantage is that if I am having a specific problem with my instance, I could fire up another instance and have someone look into the problem and update the image. My question: Does anyone have experience with such a setup on EC2? What kind of problems do you foresee?

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >