Search Results

Search found 11051 results on 443 pages for 'removable drive'.

Page 116/443 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

  • HDD vanished after wakeup from standby

    - by Sam
    In my computer I got two hard drives: One 80GB Intel X25 Postville SSD for the system and a 1,5TB Sata HDD for data. When I put the system into standby, and wake it up again, roundabout 50% of the time the 1,5TB HDD is not found. It just vanished from the system (wreaking havok to all programs running which had open files on it). Even going into the system management and refreshing the drives does not find the lost HDD. There are no messages about this in the event log. After a warm reboot the hdd is found again, just like it should. The system is a Shuttle SP35P2 Pro with 8GB Ram and DualCore CPU, OS is Windows 7 Ultimate. I even set up the OS anew, didn't help. Any ideas what might cause this? How to debug, or maybe even fix it?

    Read the article

  • Do different operating systems have different read and write speeds?

    - by Ivan
    If I have two different operating systems, such as Windows 8 and Ubuntu, running on the same hardware, will the two operating systems have different read and write speeds? My guess is that there would be minimal difference between operating systems and read and write speeds to the hard disk since the major limited factor is seeking; however, different operating systems may use different file systems in order to attempt to reduce seek time in the hard disk. Likewise, I'm sure that modern operating systems will not actually write directly to the hard disk, and instead will just have it in memory and marked with a dirty bit. Are there any studies that show differences in read and write speeds between OSs? Or would the file system being used by the OS matter more than the OS itself?

    Read the article

  • Fix bad blocks on Mac hard disk

    - by Andrew Vit
    I have a hard disk that I scanned with TechTool and it reports one bad block. As far as I can tell, TechTool only scans and reports a failure. It doesn't fix anything. Back in the day, Norton Disk Doctor did the job of scanning and flagging (remapping) bad blocks on the Mac. Today we have various tools for fixing up HFS+ directory errors (Disk Utility, fsck, DiskWarrior, TechTool), but I don't know of any tool that will do a surface scan and fix the bad blocks too. What software is available for this? If I know the address of the bad block, is there a low-level terminal utility for marking it?

    Read the article

  • Boot loop that I cannot bypass

    - by lonewaft
    Recently, on a laptop that I've used for a while, I had a strange issue where OS files were corrupted (device manager) and Windows 8 was hung after the login screen, so I reinstalled Windows 7 over the existing Windows 8 installation, and it worked for a couple days. Today, when I tried to use my laptop, it was stuck on a boot loop. Right after the BIOS screen, it would show a flashing underscore, then restart the computer, again and again until I removed the battery. I tried booting to a windows 7 install CD, but the same flashing underscore - reboot sequence happened when I tried. I tried moving the boot priority around (HDD first, CD/DVD first, even USB first) but nothing changed. After about an hour of tinkering with it, I listened to the HDD sounds, and it sounded like the HDD was trying to spin up, but failing (whining noise increasing in frequency that stopped and started in sync with the system restarting). I am planning to replace the HDD, but I'm still confused as to why a faulty HDD would stop the laptop from booting to my install DVD (tried it on a different computer, it booted from that CD fine). Anybody here have any idea why this might be happening?

    Read the article

  • Google Play Music Not Adding MP3s On-Demand

    - by J0e3gan
    My recent attempts to add music on-demand to Google Play Music have yielded nothing - no "Processing music..." or "Added __ of __" messages, just nothing. Previously I could add music on-demand; and nothing has changed on the machine from which I successfully added music previously, from which I have tried to add music on-demand recently. What could be hampering my ability to add music on-demand? WHAT I'VE TRIED: Right after I started using GPM, I briefly found that I could not add music (on-demand), but the problem went away after a logout/login. This time a logout/login has not helped. Dragging & dropping or browsing to folders or files to add has made no difference either. Nor has waiting ridiculously long for GPM to show signs of life after adding music on-demand seemed to work. Digging deeper, I read a related Google Play Help article and followed its suggestions... ran the Google Play Music Manager troubleshooter = no errors or warnings double checked my available storage = 8 GB free double checked supported file types = MP3 is still supported (of course) ..., but the problem remains. UPDATE: I found that if I configure GPM to automatically upload music added to specific folders, it strangely does add automatically what it will not add on-demand.

    Read the article

  • 1Tb disk formatted on Linux won't mount on windows nor mac

    - by Pedro MC
    I have an external HD (western digital) with 1Tb. I use Linux but I wanted to reserve a cross platform partition on the disk. I decided to create two partitions and used the "disks" application to do it. I created one partition with the LUKS (version 1) encryption and the other one, cross platform, in NTFS filesystem. Things work fine on my OS but when I try to use the disk (the cross platform partition) on both windows and mac the device is not recognized. What could it be? Next, output of "sfdisk -l /dev/sdb": Disk /dev/sdb: 121600 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sdb1 0+ 36473- 36473- 292968750 83 Linux /dev/sdb2 36473+ 121600- 85128- 683789062+ 83 Linux /dev/sdb3 0 - 0 0 0 Empty /dev/sdb4 0 - 0 0 0 Empty

    Read the article

  • I found two usb sticks on the ground. Now what?

    - by Stefano Borini
    As from subject. I want to see what's inside. I am seriously interested in finding the owner if possible and returning them, but I am worried it could be an attempt at social engineering. I own a macbook intel with OSX 10.6. It is a very important install. What would you do in my situation if you want to see the content without risks ? Any proposal welcome. Edit: I decided not to plug them in, and I brought them to the hotel reception. They will forward it to the police.

    Read the article

  • How can you make a Windows USB HDD Modify All for All Users

    - by David Allan Finch
    Hi, I use a USB HDD a lot between lots of different Windows Boxes. What I find after a while is that there get to be lots of different Permission on the files in some cases stopping me looking at files or removing them. They want Admin rights or even sometimes you need to put the disk back into the original machine with the original user. This is a right pain. Is there away of making the disk have Modify All for All Users and making this the default for all files on the disk. Thanks

    Read the article

  • Windows boots to Black Screen of Death — Is my HDD faulty?

    - by Flynn1179
    My wife's PC suddenly stopped booting up properly. It gets as far as the Windows 'loading' screen with the bar scrolling away, but that's as far as it gets for some time, then suddenly flashes up a BSoD barely long enough to see, then the display cuts out. We've got identical PCs, and after swapping components, I established that my PC suffers the same problem if I swap in the HDD. Even if I plug hers in as a second HDD on my machine, it still does the same thing, even though it's booting from mine. I can't even boot her machine from CD or DVD either, so I couldn't even use a recovery disc. I did manage to partially boot my PC into safe mode with the other HDD attached, and it got as far as loading 'crcdisk.sys' and froze. Anybody know what could be wrong with it, or at least how I can get the data off the disk? I'm assuming there's still data on the disk, given that it at least shows me the vista 'loading' screen.

    Read the article

  • ext4 filesystem corruption -- maybe hardware error?

    - by pts
    I'm getting these errors in dmesg after about half an hour after I turn on the computer: [ 1355.677957] EXT4-fs error (device sda2): htree_dirblock_to_tree: inode #1318420: (comm updatedb.mlocat) bad entry in directory: directory entry across blocks - block=5251700offset=0(0), inode=1802725748, rec_len=179136, name_len=32 [ 1355.677973] Aborting journal on device sda2-8. [ 1355.678101] EXT4-fs (sda2): Remounting filesystem read-only [ 1355.690144] EXT4-fs error (device sda2): htree_dirblock_to_tree: inode #1318416: (comm updatedb.mlocat) bad entry in directory: directory entry across blocks - block=5251699offset=0(0), inode=2194783952, rec_len=53280, name_len=152 [ 1356.864720] EXT4-fs error (device sda2): htree_dirblock_to_tree: inode #1312795: (comm updatedb.mlocat) bad entry in directory: directory entry across blocks - block=5251176offset=1460(13748), inode=1432317541, rec_len=208208, name_len=119 /dev/sda is an SSD, and it's using the noop scheduler. /etc/fstab entry: UUID=acb4eefa-48ff-4ee1-bb5f-2dccce7d011f / ext4 errors=remount-ro,noatime,discard,user_xattr 0 1 System information: $ cat /proc/mounts | grep /dev/sd /dev/sda1 /boot ext2 rw,noatime,errors=continue 0 0 $ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=10.04 DISTRIB_CODENAME=lucid DISTRIB_DESCRIPTION="Ubuntu 10.04.3 LTS" $ uname -a Linux leetpad 2.6.35-30-generic-pae #61~lucid1-Ubuntu SMP Thu Oct 13 21:14:29 UTC 2011 i686 GNU/Linux I've run memtest for 7 hours, it didn't found any memory errors. Any obvious ideas what can go wrong in this case? The most reasonable thing I can imagine is that the SSD is silently dropping some write requests, which eventually leads to an EXT4 filesystem inconsistency (but no disk I/O errors). How can this happen? Is there a relevant configuration option I should ensure to be set correctly? What tools should I use to diagnose the hardware failures? Would it be possible to diagnose the SSD failure without overwriting data?

    Read the article

  • Cleaning up temp files in OSX

    - by deddebme
    I was a Windows person for more than 10 years. Around 4 months ago, I switched to Mac, and I have never looked back. But there is one thing that bothers me, which is my Mac partition volume is losing space slowly and gradually. I am pretty sure there are a lot of orphaned temporary files laying around in the volume. I know where to find the obsoleted temp files in my Windows partition, how about in Mac OSX?

    Read the article

  • Expanding Files 0%, error 0x80070017 Windows 7 x64 RTM

    - by Liam
    I have downloaded Windows 7 x64 from MSDN. I have checked the hash of the file and it is correct. I have them made a bootble USB stick (http://kmwoley.com/blog/?p=345 (had to use my vista bootsect.exe as running 32bit at the moment). When I boot from the USB it fails when expanding the file. It stays on 0% and fails after around 90 seconds. The error is 0x80070017. As the hash is correct and I am using USB I guess it could be a hardware problems. Any advice how to get Windows 7 installed? The machine is a Dell Studio Slim.

    Read the article

  • Disk boot failure, insert system disk and press Enter.

    - by torbengb
    Similar to this related question, I came home and found that my media center pc showed this message, Disk boot failure, insert system disk and press Enter Before I do anything with the (defective?) harddisk, what are the best first steps I can take to fix this with a minimum of damage? Normally the machine (Win Vista) is always on and never reboots by itself (Windows auto-updates are disabled too). Something must have caused it to reboot, though I'm sure we didn't have a power outage. The machine can't reboot on that disk, but it will boot on another disk I just plugged in for testing. I haven't changed anything, or even touched the machine, for several days, and it has been running fine until now. I did replace the power supply some weeks ago, because the old one suddenly stopped working. It has been working fine with the replacement PSU.

    Read the article

  • How do I protect business critical data against fire?

    - by Bill Knowles
    We have 72 hard drives that contain our webcast inventory. The number is increasing. We're located in a frame building and we are afraid of not only fire, but catastrophic fire. I've priced fireproof safes that hold to the required 125F for hard drives. Their price is through the roof. Seems to me if we made backups of each of the hard drives and stored them off-site somewhere, or contracted with an online backup storage company, we might run up a bill buying backup drives that would approach the $7,000 cost of the safe! What's the best way to protect our data from the risk of fire?

    Read the article

  • How do partitions help in optimizing the harddrive?

    - by Fasih Khatib
    I was recently reading a guide on Tom's Hardware about how to optimize the harddrive. They listed creating partitions as one of them. They said keeping the various files seperate is a good idea as it reduces the read/write cycles required. Now my querry is: what size partitions do i make for my 500gb harddrive. Its completely blank. I will be installing WIN7 in it. My usual strategy is to divide it into two equal partitions. Is it the optimum size?

    Read the article

  • Why would my HDD main partition suddenly become hidden?

    - by Luis Oscar
    A few days ago I was using my computer as usual and I turned it off. The next day it wouldn't boot up. It just stayed after the hardware diagnostic window on the intermittent underscore screen. So clearly It wasn't booting up. I tried turning it on and off a couple of times with no avail. Finally I used windows 7 disk and it seemed as if there was no HDD. not even the installation would see the HDD. So i thought it was dead, i bought a new one installed it with windows and used a external case with the old HDD. plug it in and still couldn't see it. I finally downloaded a partition program EASUS or something and my HDD was there listed WITHOUT a system letter. I could however explore it and i set it as Unhidden and it came back to life. I could see it normally. I really just wish someone could explain to me what happened here, was it a virus? does it means the HDD is about to die? How can i prevent this or what should I do now? should i stop using this OLD HDD? Thanks

    Read the article

  • pendrive automount not working

    - by Delirium tremens
    There are lots of ways to disable pendrive automount. I used one, but regreted, forgot which one and now need to reenable pendrive automount. It may have been a changed setting after pressing a button while booting Ubuntu or a deleted folder named something20090101 or 01012009something or whatever as long as it's a word and a date... If I don't want pendrive viruses, it's disable autorun, but keep automount enabled, right? blush

    Read the article

  • "Bug code usb driver" blue screen in windows

    - by trinity
    Hi all, I have dual OS ( Fedora and windows xp ). for the past two months when i use windows xp, i'm frequently getting a blue screen with msg : " bug code usb driver ".Not knowing what to do next , i switch off the system and reboot it. Can anyone help me understand why this is happening , and how to troubleshoot this problem.. Here's the info provided about this problem after system restarts : BCCode : fe BCP1 : 00000004 BCP2 : 88F3BA08 BCP3 : 88E9FB10 BCP4 : 00000000 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

    Read the article

  • Is it possible to mount a disk image, created with dd, to a directory on a mounted external usb hdd?

    - by Keeper Hood
    I have an image of my home (/dev/sda3) partition, which I've created using the "dd" command. dd if=/dev/sda3 of=/path/to/disk.img I've deleted the home partition via gparted in order to enlarge my /dev/root partition. Then I've recreated the /dev/sda3 partition which is smaller in size then the one I've backed up to the image. I was wondering since I have a 2TB external HDD, could it be possible to mount my backed up image on the external HDD and then copy the files into the /home directory. Since the external HDD would be already in a "mounted state", I'm unsure whether this is a good idea, mounting on a mounted device. I'm running Slackware 13.37 (64bit). used ext4 on all the partitions. resized the root partition with gparted live cd. I've tried mount -t ext4 /path/to/disk.img /mng/image -o loop It gave me an fs error (wrong fs type, bad option, bad superblock on dev/loop/0) Then i did dmesg | tail which outputs: EXT4-fs (loop0) : bad geometry: block count 29009610 exceeds size of defice (1679229 blocks) I have no idea what to do, I want to restore my /home data from the image I've backed up.

    Read the article

  • Best DVD Burner?

    - by davr
    I've got a fairly old generic DVD burner that doesn't support dual layer, and I'm looking to upgrade since they seem so cheap these days. Does it matter what model I get, or is it such that I can just buy whatever happens to be on sale today? Are there advantages to a certain brand over another? Basically I just want something that's fast, cheap, and produces good quality burns. Any advice would be helpful.

    Read the article

  • When and why would Windows Explorer lock an external hard disk?

    - by Ngu Soon Hui
    I am quite surprised to see that Windows Explorer is locking my external hard disk. Is there any reason why explorer.exe is holding on to my external hard disk? Before I was trying to detach the external hard disk, I was opening a csproj file using Visual Studio 2008. I made sure that I closed down Visual Studio before trying to detach the external hard disk. There was no other active program except Google Chrome, from what I could see, that was running.

    Read the article

  • Partial-stroking / Short-stroking / Half-stroking Hard Drives?

    - by Daniel Magliola
    Could anyone here explain to me what is implied by this term? (I've seen the same thing mentioned with the 3 terms). At first when I read about it, for some reason I understood that it was some way of splitting the bytes across the platters of the disk, which sounded like a good idea and obviously doesn't make sense, because that wouldn't cut disk size in half (and disk are probably already splitting bytes across platters)... The best I've come to understand is that basically instead of creating one partition for the whole size of the disk, you create 2 partitions, and use only one of them, either the one in the "center" or the one in the "rim" of the platters, and since one of the two is faster (people didn't seem to agree on which one was faster), that makes everything better. Am I understanding this correctly? Has anyone tried this with their drives and had a good outcome? Thanks!

    Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >