Search Results

Search found 18914 results on 757 pages for 'turing machine'.

Page 116/757 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• VMWare Workstation 8 Disk I/O & Hard Faults

  - by Scott

  I have VMWare Workstation 8 installed on a host machine with the following specs: Intel i5 2500k CPU 16GB DDR3 1600 ram 1TB Western Digital Caviar Black HD I have two Windows 7 virtual machines configured (currently running one at a time but will be operating both at once when my 32GB RAM kit arrives in a couple days). Each one is configured with 8GB of RAM and no tweaks/performance customizations or anything done. All of the VMWare settings are the defaults. When I boot into these machines and run various programs (Visual Studio, Outlook, etc), I can hear the disk thrashing quite a bit and checking Resource Monitor, I can see that I'm getting anywhere between 300-800 hard faults per second. From the host machine, it shows they're coming from the VMWare image. If I go to the virtual machine, whatever app I'm currently loading is the image that's causing the hard faults. As I understand it, hard faults are (simply) when an address in memory has been swapped out to the page file and has to be read from the page file instead of from memory. I don't understand why this is happening though. With 8GB of ram on the guest machine and 6.5GB available, what could be causing this? I know Windows 7 supposedly improved on page file management over XP but it seems excessive for this kind of slowdown, disk thrashing and high hard fault count when I have that much free RAM. Is there anything I can to to improve the performance in my guest machines? On the host machine, I can open/run any applications at all and hard faults stays around 0 with low disk I/O.

  Read the article

• How can enable credential manager on windows 7

  - by Bastian

  I have a machine with windows 7 in the domain, in the server we share a folders. The problem is when i try con map a drive in the machine with windows 7 i have acces in the folder but i have to write a username and password of the server everytime that power on the machine. i check the credential manager on control panel and the option is disable and i don't know how to enable it save it and don't write the password every time that i log in

  Read the article

• My computer may have been compromised, what should I do?

  - by InkBlend

  A few weeks ago, my machine (lets call it "main") was logged into wirelessly from an unauthorized host, probably using ssh. I did not detect the intrusion until a few days ago, and my machine is completely shut down. I found the login using this line from last: myusername pts/1 ipad Tue Oct 15 22:23 - 22:25 (00:02) Needless to say, not only does no one in my family own an iPad, but almost none of my friends do, either. This makes me suspect that whoever was behind this changed the hostname of their machine. Additionally, I discovered this line in the last output on another machine of mine ("secondary"): myusername pts/2 :0 Tue Oct 15 22:23 - 22:23 (00:00) This line coincides with the timestamp from main, which has password-less ssh access (through keys) to secondary. Is it possible that whoever broke in to main has also rooted secondary? How can I prevent this from happening again? Are there logs that I can look through to determine exactly how main was accessed (I am the only user on the system and have a very strong password)? Is it at all possible that this is just a weird bug that occurred? Should I, and where should I start looking for rootkits and/or keyloggers? In short, what should I do?

  Read the article

• How to have 2 windows machines on the same network with the same IP address

  - by Stu

  I have a custom made ADC device that is spitting out data by addressed UDP packets. I have that device plugged into a 4 port switch. I have one windows embedded standard 7 machine which is the normal recipient of that data. To be able to receive the data (Using LabVIEW) the windows network adapter IPv4 settings must have a static IP address that corresponds to the UDP packet destination. I would like to add a second windows machine (This one is just regular Win 7 Pro) to simultaneously catch the data, however with all devices connected to the switch, the Win 7 Pro machine recognizes an IP address conflict and will not take the setting for the required static IP address. (The network adaptor settings show that the correct value has been entered but ipconfig shows that it is not actually set.) Neither windows machine needs to transmit network data, they only need to be able to receive the UDP data from the ADC device. Is there any way to disable this IP address conflict detection 'feature' of windows networking?

  Read the article

• Windows 7 - Samba share remember password

  - by crmpicco

  I have a Samba share setup on my Windows 7 machine which allows me to access a CentOS 5.6 VM running on my machine with VirtualBox. When I restart my Windows machine I have to start the VM, as you would expect. However, when I go to connect to my Samba share in Windows it asks me for the password every time - even if I tick 'Remember My Password'. Is there any way to store the password for the VM so that it doesn't ask me every time?

  Read the article

• Scheduling VMWare ESXi 4.1 VM Restart

  - by Robin Day

  We had a virtual machine running on a VMWare Server host on Windows Server 2003. The machine is set up with non persistent disks. We had a windows task schedule set up that ran a batch file to reset the machine each week so that it returned to it's original state. The batch file that we had running was: "C:\Program Files\VMware\VMware Server\vmware-cmd" "C:\Virtual Machines\VirtualMachineName\VirtualMachineName.vmx" stop hard "C:\Program Files\VMware\VMware Server\vmware-cmd" "C:\Virtual Machines\VirtualMachineName\VirtualMachineName1.vmx" start We have since migrated this machine to the free version of ESXi 4.1. Can anyone let me know if and how it is possible to schedule such a restart?

  Read the article

• Wake on Lan Remote not waking PC while the PC does receive the packet.

  - by Nycrea

  Over the last couple of weeks, I have been trying to set up WOL from a remote location. When I use my laptop to wake the machine locally, it works just fine. (for some reason, when I try to wake from my phone with an app called "WOL wake on lan" it does not work locally either, but I'll get to that later) Anyway, when the machine is turned on, and I let it 'listen' for incoming magic packets (with a program called "WOL magic packet sender") on my specified port, it does receive them, though when turned off, the machine does not wake. When sending from phone, either locally or via 3G remotely, it does receive but does not wake as well. Because the machine does receive them when turned on and listening, but does not wake when turned off, I am convinced the cause of the problem is my receiving PC, rather than the router or the sender. Some extra info: The receiving machine is a PC running Windows 7 64bit. My router is the Netgear JWNR2000v2. I have the port I use forwarded to my PC's static IP in the router. If anyone could help, or just share your own story with the same problem, maybe we can work this out. Thanks a lot in advance.

  Read the article

• IISReset to remote server fails

  - by Rob

  I'm attempting to run iisreset 192.168.100.182 (against a Windows Server 2003 machine) from another machine on the same domain (running Windows 7 Professional) and am receiving the following error message: Attempting stop... Restart attempt failed. Access denied, you must be an administrator of the remote computer to use this command. Either have your account added to the administrator local group of the remote computer or to the domain administrator global group. I'm running the command from an elevated command prompt with my domain account added to the Administrators group on the target machine. I've attempted this when being a member of the administrators group both directly and by virtue of membership of a domain group that's a member of the administrators group. I've reviewed the event log on the target machine and it shows a selection of Success Audits for my domain credentials immediately after attempting the iisreset, but no failure audits.

  Read the article

• IIS 7 Web service access

  - by Aharon Manne

  I am trying to debug a simple web service. I have IIS 7 installed on my development machine (Windows 7), and have installed the web service. I can access it from my development machine, but not from any other machine in the local network.I opened the firewall to HTTP access, and I can access the default website from other machines, so it is not the firewall.What security settings should I look at to try to allow devices on the LAN to access the web service?

  Read the article

• VMWare Server with multiple processors

  - by user43046

  I have a new linux machine with two Core Duo CPUs. However, VMWare Server only recognizes one. In the host summary it shows: Processors: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz 1 CPU x 2 Cores On another machine, it shows: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz 1 CPU x 4 Cores This machine also has two CPUs. Howcome VMWare is not seeing all the CPUs?

  Read the article

• How can I send a Ctrl+Alt+Delete through Remote Desktop in Windows 8?

  - by Tanner

  I need to send a CtrlAltDelete to a remote machine through Remote Desktop. The CtrlAltDelete is being intercepted by Windows 8, regardless of whether the remote desktop has focus or is in full screen. I'm remoting in to a Windows XP machine, and I've tried launching Remote Desktop through both the desktop and the Modern UI. How can I send a CtrlAltDelete? I'd rather not install anything on the machine.

  Read the article

• Error code 1005 (errno: 121) upon create table while restoring MySQL database from a dump

  - by Jonathan

  I have a linux prod machine and a Win7 64bit dev machine. My workflow includes dumping the production MySQL database on the linux machine and restoring it in my local MySQL database on the windows machine (using SQLyog). This worked fine for a long time. Following some trouble, I formatted and reinstalled my windows dev machine. Since then I'm unable to restore the db on it. I keep receiving the following error: Query: CREATE TABLE `auth_group` ( `id` int(11) NOT NULL auto_increment, `name` varchar(80) collate utf8_unicode_ci NOT NULL, PRIMARY KEY (`id`), UNIQUE KEY `name` (`name`) ) ENGINE=InnoDB AUTO_INCREMENT=2 DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci Error occured at:2010-06-26 17:16:14 Line no.:30 Error Code: 1005 - Can't create table 'ap_site.auth_group' (errno: 121) Notice that this is the first create table statement in the sql dump file. This error occurs both on MySQL Community Server 5.1.41 and 5.1.48 and with SQLyog Community 8.0.4 and 8.5.1. I really don't know what's different in my configuration from before the reinstall and now and why does it have this effect. Restoring from sql dump is something I need to keep on doing, so I need a permanent fix and not a tailored workaround.

  Read the article

• Well....a ghost lives in my server...

  - by tsgiannis

  Hello to every body and greetings from Greece I have a rather unusual situation and i am running out of ideas. I have this old server (IBM x205 - P4 2.4Ghz,3xSCSI 36gb) and i was about a year ago i decided to use it as an additional domain controller,fax & file server...for this task i had a Delock 70154 SATA card along with 2x320 SATA II HDDs Everything was going super smoothly until about 3 weeks ago. I was on a trip and i was informermed when i got back that the server was found frozen...well i considered it was a glitch since a simple powerdown power up fixed everything.Again 2 weeks ago another freeze situation....it got suspicious but again power down power up everything was running.... Last again it frozen and when i power it up it came with a message that the Domain services could not start due to NTDS corruption....booting in safe mode revealed that there was an issue with the SATA Raid (degraded). After a lot of searching i degraded the server...cleaned Active Directory and pulled both HDDs out (one of these was really BAD ) and recovered my files (i had some problems with ho Delock handles the redudant HDD). Right now my server is vanilla simple...with only what the factory installed and here is where the fun begins. Everyday when i arrive at the office i find this particular machine dead..and i mean total dead...just a black screen and nothing else...the cpu fan is working ,the psu is working .keyboard and mouse are dead(they also lock my kvm) ...network is dead.... the machine is DEAD. I power it down forcilly ...i power it up and for the 8 hours i am in the office it works,either idling or running some kind of diagnostic...when i leave the office after some time..it maybe half an hour ...it maybe 4 hours the machine dies...at least this is the information the event log shows (" the previous shutdown at xx:xx:xx was unexpected) Well i must admit i am runnig out of ideas.... I have tried Memtest....nothing Passmark burn in test.....nothing Carefull study of the event log.....nothing Set Instead of restart..BSOD....nothing Power sceheme to sleep...all set to never. i know there are a lot of other tools that heavily stress a machine like occt but .... the machine is old...today i will give them a try nevertheless ..... One idea is to reformat it...but ... i really like to find what is causing this because i could get to a situation that everything is working for a while and kaboom...one day again is dying.. I really need a helping hand and every opinion / idea is well welcomed.... iknow the obvious solution is to never leave the office but....i have a life...sory server...:) P.S this situation with the machine dying some time after is going on for about one week...everyday i would set either the RAID to rebuild....or to copy/recover files and while everythig was working

  Read the article

• load balancing between physical and virtual machines

  - by fefe

  First of all sorry if my question would be not relevant, I'm quite beginner. In short: I have 2 physical machines - first(Windows Server 2007, Apache 2.2) on the second machine esxi installed to host virtual machines . I have been converted my physical machine(1) on esxi(2) and in the next step I would like to deploy a load balancer between the physical and virtual machine. Would be this workaround appropriate? If yes what are the steps to follow?

  Read the article

• Which Processor should I buy: Intel Quad Core 2.5Ghz or Intel Core 2 Duo 2.9 Ghz?

  - by Kryten

  Hi, I am looking at buying a desktop and have narrowed down my choices to 2 machines with exactly the same specs, but different CPU's. Machine 1 CPU: Intel® Core™2 Quad Processor Q8300 (4M Cache, 2.50 GHz, 1333 MHz FSB) Machine 2 CPU: Intel® Core™2 Duo Processor E7500 (3M Cache, 2.93 GHz, 1066 MHz FSB) I plan on using the PC for the following: Music Playing Software Development Virtual Machine Running Gaming "General Work" Which CPU would better suit the job?

  Read the article

• How is network mounted software executed?

  - by CptSupermrkt

  I would like to understand how network mounted software works. For example, at my place of work, we have a software server. Each client machine (hundreds of them) automatically mounts directories from the software server on boot. For example, a program like Matlab is installed just once on the software server, but each client machine can start up an instance of Matlab. What is going on under the hood? Let's say I run /opt/bin/matlab and /opt/ is mounted from the software server, what happens when I press Enter to execute matlab on a client machine? The process is on the client machine, and I've already narrowed down that there isn't any implicit or hidden file transfer (i.e. copying matlab to my machine temporarily for that session) by running matlab on a computer with nearly zero disk space (i.e. not enough room to transfer). Since Matlab was installed on the server, how is my client computer executing it? What mechanism is controlling this? What is happening behind the scenes?

  Read the article

• How to host an AP or a hotspot?

  - by user1048138

  I'm running Ubuntu 12.04 as a virtual machine on my Mac. Since I am unable to get the virtual machine to have full access to my WiFi card, I bought another USB WiFi card to use. This is my WiFi card. If you are unfamiliar with Virtual machine, as far as I know, since the Ubuntu has its own card now, it shouldn't matter. I have followed these guides with no luck: https://help.ubuntu.com/community/WifiDocs/WirelessAccessPoint http://www.danbishop.org/2011/12/11/using-hostapd-to-add-wireless-access-point-capabilities-to-an-ubuntu-server/ The problem is that the WiFi connection appears on all of the machines that I have in my house: 2 iPhones, Dell machine running Ubuntu and two Macbooks. However the connection times out on all of these machines. Questions: Could this be a driver issue if that same WiFi card can connect to other WiFi points and use its internet Could this be DHCP related? I would think not. It should at least get a 169.X.X.X address? No? Any solutions for me?

  Read the article

• APPPATH and LOCALAPPPATH environment variables are not set on a profile in Windows 7 Pro 32bit

  - by Timur Fanshteyn

  I am having problem with a user account on a Windows 7 machine (local install, admin user account) APPPATH and LOCALAPPPATH environment are not set. Another user on the same machine, (also a local account, but without admin rights) has the variables set. This started to happen recently, however, I can not figure out if there was something installed on the machine to cause this. This is creating issues with applications that are trying to expand the variables to store local files. Thank you for the help.

  Read the article

• Can't boot from CD

  - by Jason Swett

  I installed Ubuntu on a PowerBook G4 and it only works about 10% of the time. For this reason I decided to re-install OS X, but my machine won't boot from CD. It also won't boot Ubuntu the vast majority of the time, so I'm kind of screwed. After a ton of tries, I finally got my machine to boot a Linux command line. Is there anything I can do at this point to make my machine more runnable, just for the sake of installing OS X?

  Read the article

• Can't boot from CD

  - by Jason Swett

  I installed Ubuntu on a PowerBook G4 and it only works about 10% of the time. For this reason I decided to re-install OS X, but my machine won't boot from CD. It also won't boot Ubuntu the vast majority of the time, so I'm kind of screwed. After a ton of tries, I finally got my machine to boot a Linux command line. Is there anything I can do at this point to make my machine more runnable, just for the sake of installing OS X?

  Read the article

• Unable to view 2 local sites over network

  - by gentrobot

  I have 2 websites running on my local machine that I'd like to view from other machines on the same network. For /etc/apache2/sites-available/site1.com: <VirtualHost *:80> ServerName site1.com DocumentRoot /var/www/answers/app/webroot DirectoryIndex index.php <Directory "/var/www/answers/app/webroot"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> For /etc/apache2/sites-available/site1.com: <VirtualHost *:80> ServerName site2.com DocumentRoot /var/www/answers2/app/webroot DirectoryIndex index.php <Directory "/var/www/answers2/app/webroot"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> I have added 2 entries in the /etc/hosts file as: 127.0.0.1 site1.com 127.0.0.1 site2.com Now, when I point the browser on my machine to site1.com, it shows me the first site and pointing the browser to site2.com, it shows me the second site. However,when I type in the local IP of my machine in the browser, it always shows site2. How can I change it to switch between site1 and site2 ? Is there a way that I can view both the sites form another machine (esp. mobile devices over wireless network) ?

  Read the article

• Battery won't charge and BSOD: DRIVER_POWER_STATE_FAILURE

  - by JamesGecko

  I have a Dell Vostro 1510 running Windows 7. Today when I pulled my machine out of it's bag and plugged it in, the little battery light on the side blinked constantly instead of staying solid, and Windows showed a message that the battery was not charging. The battery is 3.5 years old, but it can still hold the machine in standby overnight, so I don't know why it won't charge anymore. After I have had the machine on for a while (20 minutes the first time, 40 minutes the second time), it shows a blue screen of death with the message DRIVER_POWER_STATE_FAILURE and reboots. I can deal with the battery being dead, but not with blue screens of death. Does anyone know how to fix it? Edit: Potentially relevant, this started happening after an OS update was automatically installed on Friday and Windows started nagging to reboot. The first BSOD was before the reboot; the update made a lot of registry changes when the machine came up, and the second BSOD was 40 minutes later.

  Read the article

• How do I start the Workstation Service so I can use `net use`?

  - by nitefrog

  I have a Windows 7 machine that logs into a domain. The machine can net view and see the different shares, but when I try to use, net use * \\name\share, I get an error stating that the service is not started. Yet when I issue a net start, it states the service is already started. My other win7 machines work fine; they can see and use any of the shares. Is there a security setting that needs to be disabled or enabled? I really need to get this working, and I have no other ideas as the other machines have no problem accessing the shares on different systems. The error I am getting is , "The Workstation Service Has Not Been Started", but like I said other machines can connect fine, and when I issue a, "net start workstation", it states the service is already started. In addition the error number I am receiving is 2138. UPDATE: On the machine that is having issues. From the troubled machine if I issue a Net View \\name I can see all the shares on the machine I want to connect to. When I try to net use * \\name\sharename I get the error The Workstation service has not started. I have set both settings sc config lanmanworkstation start = auto and sc config lanmanserver start = auto on the Windows7 computer that is having issues. I have rebooted the computer and still no dice. I can net view any computer on the network and see all shares, but I cannot access any of the shares in which I can see. In the registry under the HKLM\System\CurrentControlSet\Services Both LanmanServer and LanmanWorkstation start is set to 2. Screen capture of net use and view: The Services: This is really weird. What am I missing? It has to be a security setting...

  Read the article

• Grizzly server - works with IP, but not with domain name

  - by Hitchhiker

  I'm hosting a grizzly web service on a Windows 7 Pro machine (embedded in a regular Java process), and it is binding to http://my-domain-name. When trying to hit the service from another machine, requests to http://my-domain-name fail (fiddler shows error code 502), but requests to http://my-ip work. When the service runs on a Windows Server 2008 machine, this doesn't happen (both requests succeed). What could be the issue?

  Read the article

• Moving domain currently on Google Apps to my own machines

  - by mag

  I own a domain which currently uses Google Apps (it was free back then). Due to recent events I have decided I want to move everything right where I can control the data, which basically means I have the idea of either using a dyndns solution and have at home my own mail server or, better, use an hosted machine to retrieve the mail and the move it via mua to a local machine. My problem is that I know basically next to nothing about DNS and stuff, while I have installed mail servers before. :) [I simply never had the need to work with DNS...] I'd really appreciate if someone could point me in the right direction: what do I need to do to: terminate the Google Apps management of the domain setup dns entries to that mail goes to the new server instead of Google Apps Additionally: if I decide to go the "hosted route" and I put up a machine via a supercheap hosting seller (say, the cheapest OVH one is a few euros a month), how can I tell the world that that machine is the mail server? Of course I would be wise to do a full backup of the mail on Google Apps, and that's easy enough to do by imap (right?).

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >