Search Results

Search found 17616 results on 705 pages for 'uls log'.

Page 116/705 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

  • Error when reloading supervisord: unix:///tmp/supervisor.sock no such file

    - by Yarin
    I'm running supervisord on my CentOS 6 box like so, /usr/bin/supervisord -c /etc/supervisord.conf and when I launch supervisorctl all process status are fine, but if I try to reload using supervisorctl I get unix:///tmp/supervisor.sock no such file I'm using the same config file I've used successfully on other boxes, and im running everything as root. I can't undesrtand what the problem is... Config file: ; Sample supervisor config file. [unix_http_server] file=/tmp/supervisor.sock ; (the path to the socket file) ;chmod=0700 ; socket file mode (default 0700) ;chown=nobody:nogroup ; socket file uid:gid owner ;username=user ; (default is no username (open server)) ;password=123 ; (default is no password (open server)) ;[inet_http_server] ; inet (TCP) server disabled by default ;port=127.0.0.1:9001 ; (ip_address:port specifier, *:port for all iface) ;username=user ; (default is no username (open server)) ;password=123 ; (default is no password (open server)) [supervisord] logfile=/tmp/supervisord.log ; (main log file;default $CWD/supervisord.log) logfile_maxbytes=50MB ; (max main logfile bytes b4 rotation;default 50MB) logfile_backups=10 ; (num of main logfile rotation backups;default 10) loglevel=info ; (log level;default info; others: debug,warn,trace) pidfile=/tmp/supervisord.pid ; (supervisord pidfile;default supervisord.pid) nodaemon=false ; (start in foreground if true;default false) minfds=1024 ; (min. avail startup file descriptors;default 1024) minprocs=200 ; (min. avail process descriptors;default 200) ;umask=022 ; (process file creation umask;default 022) ;user=chrism ; (default is current user, required if root) ;identifier=supervisor ; (supervisord identifier, default is 'supervisor') ;directory=/tmp ; (default is not to cd during start) ;nocleanup=true ; (don't clean up tempfiles at start;default false) ;childlogdir=/tmp ; ('AUTO' child log dir, default $TEMP) ;environment=KEY=value ; (key value pairs to add to environment) ;strip_ansi=false ; (strip ansi escape codes in logs; def. false) ; the below section must remain in the config file for RPC ; (supervisorctl/web interface) to work, additional interfaces may be ; added by defining them in separate rpcinterface: sections [rpcinterface:supervisor] supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface [supervisorctl] serverurl=unix:///tmp/supervisor.sock ; use a unix:// URL for a unix socket ;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket ;username=chris ; should be same as http_username if set ;password=123 ; should be same as http_password if set ;prompt=mysupervisor ; cmd line prompt (default "supervisor") ;history_file=~/.sc_history ; use readline history if available ; The below sample program section shows all possible program subsection values, ; create one or more 'real' program: sections to be able to control them under ; supervisor. ;[program:foo] ;command=/bin/cat [program:embed_scheduler] command=/opt/web-apps/mywebsite/custom_process.py process_name=%(program_name)s_%(process_num)d numprocs=3 ;[program:theprogramname] ;command=/bin/cat ; the program (relative uses PATH, can take args) ;process_name=%(program_name)s ; process_name expr (default %(program_name)s) ;numprocs=1 ; number of processes copies to start (def 1) ;directory=/tmp ; directory to cwd to before exec (def no cwd) ;umask=022 ; umask for process (default None) ;priority=999 ; the relative start priority (default 999) ;autostart=true ; start at supervisord start (default: true) ;autorestart=unexpected ; whether/when to restart (default: unexpected) ;startsecs=1 ; number of secs prog must stay running (def. 1) ;startretries=3 ; max # of serial start failures (default 3) ;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2) ;stopsignal=QUIT ; signal used to kill process (default TERM) ;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10) ;killasgroup=false ; SIGKILL the UNIX process group (def false) ;user=chrism ; setuid to this UNIX account to run the program ;redirect_stderr=true ; redirect proc stderr to stdout (default false) ;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO ;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10) ;stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0) ;stdout_events_enabled=false ; emit events on stdout writes (default false) ;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO ;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stderr_logfile_backups=10 ; # of stderr logfile backups (default 10) ;stderr_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0) ;stderr_events_enabled=false ; emit events on stderr writes (default false) ;environment=A=1,B=2 ; process environment additions (def no adds) ;serverurl=AUTO ; override serverurl computation (childutils) ; The below sample eventlistener section shows all possible ; eventlistener subsection values, create one or more 'real' ; eventlistener: sections to be able to handle event notifications ; sent by supervisor. ;[eventlistener:theeventlistenername] ;command=/bin/eventlistener ; the program (relative uses PATH, can take args) ;process_name=%(program_name)s ; process_name expr (default %(program_name)s) ;numprocs=1 ; number of processes copies to start (def 1) ;events=EVENT ; event notif. types to subscribe to (req'd) ;buffer_size=10 ; event buffer queue size (default 10) ;directory=/tmp ; directory to cwd to before exec (def no cwd) ;umask=022 ; umask for process (default None) ;priority=-1 ; the relative start priority (default -1) ;autostart=true ; start at supervisord start (default: true) ;autorestart=unexpected ; whether/when to restart (default: unexpected) ;startsecs=1 ; number of secs prog must stay running (def. 1) ;startretries=3 ; max # of serial start failures (default 3) ;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2) ;stopsignal=QUIT ; signal used to kill process (default TERM) ;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10) ;killasgroup=false ; SIGKILL the UNIX process group (def false) ;user=chrism ; setuid to this UNIX account to run the program ;redirect_stderr=true ; redirect proc stderr to stdout (default false) ;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO ;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10) ;stdout_events_enabled=false ; emit events on stdout writes (default false) ;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO ;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stderr_logfile_backups ; # of stderr logfile backups (default 10) ;stderr_events_enabled=false ; emit events on stderr writes (default false) ;environment=A=1,B=2 ; process environment additions ;serverurl=AUTO ; override serverurl computation (childutils) ; The below sample group section shows all possible group values, ; create one or more 'real' group: sections to create "heterogeneous" ; process groups. ;[group:thegroupname] ;programs=progname1,progname2 ; each refers to 'x' in [program:x] definitions ;priority=999 ; the relative start priority (default 999) ; The [include] section can just contain the "files" setting. This ; setting can list multiple files (separated by whitespace or ; newlines). It can also contain wildcards. The filenames are ; interpreted as relative to this file. Included files *cannot* ; include files themselves. ;[include] ;files = relative/directory/*.ini

    Read the article

  • Need help in setting lighttpd on Ubuntu 9.10

    - by hap497
    Hi, I am trying to run lighttpd on Ubuntu 9.10. I get the conf file from the doc directory of lighttpd source. $ sudo ./lighttpd -f lighttpd.conf $ ps -ef | grep lighttpd root 2094 1 0 19:40 ? 00:00:00 ./lighttpd -f lighttpd.conf This is my lighttpd.conf: $ more lighttpd.conf # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", # "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) #server.port = 81 ## bind to localhost (default: all interfaces) #server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.s ocket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "ac cess plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 When I go to browser and hit 'http://127.0.0.1', I get link not found. Any idea?

    Read the article

  • ServerRoot in my lighttpd.conf

    - by michael
    Hi, I have use the following example lighttpd.conf to launch my lighttpd. Can you please tell me where is my 'ServerRoot'? # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) server.port = 9090 ## bind to localhost (default: all interfaces) server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => 1026, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", #"docroot" => "/" # remote server may use # it's own docroot )) ) ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.socket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 Thank you.

    Read the article

  • MSMQ messages using HTTP just won't get delivered

    - by John Breakwell
    I'm starting off the blog with a discussion of an unusual problem that has hit a couple of my customers this month. It's not a problem you'd expect to bump into and the solution is potentially painful. Scenario You want to make use of the HTTP protocol to send MSMQ messages from one machine to another. You have installed HTTP support for MSMQ and have addressed your messages correctly but they will not leave the outgoing queue. There is no configuration for HTTP support - setup has already done all that for you (although you may want to check the most recent "Installation of the MSMQ HTTP Support Subcomponent" section of MSMQINST.LOG to see if anything DID go wrong) - so you can't tweak anything. Restarting services and servers makes no difference - the messages just will not get delivered. The problem is documented and resolved by Knowledgebase article 916699 "The message may not be delivered when you use the HTTP protocol to send a message to a server that is running Message Queuing 3.0". It is unlikely that you would be able to resolve the problem without the assistance of PSS because there are no messages that can be seen to assist you and only access to the source code exposes the root cause. As this communication is over HTTP, the IIS logs would be a good place to start. POST entries are logged which show that connectivity is working and message delivery is being attempted: #Software: Microsoft Internet Information Services 6.0 #Version: 1.0 #Date: 2006-09-12 12:11:29 #Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status 2006-09-12 12:12:12 W3SVC1 10.1.17.219 POST /msmq/private$/test - 80 - 10.2.200.3 - 200 0 0 If you capture the traffic with Network Monitor you can see the POST being sent to the server but you also see a response being returned to the client: HTTP: Response to Client; HTTP/1.1; Status Code = 500 - Internal Server Error "Internal Server Error" means we can probably stop looking at IIS and instead focus on the Message Queuing ISAPI extension (Mqise.dll). MSMQ 3.0 (Windows XP and Windows Server 2003) comes with error logging enabled by default but the log files are in binary format - MSMQ 2.0 generated logging in plain text. The symbolic information needed for formatting the files is not currently publicly available so log files have to be sent in to Microsoft PSS.  Although this does mean raising a support case, formatting the log files to text and returning them to the customer shouldn't take long. Obviously the engineer analyses them for you - I just want to point out that you can see the logging output in text format if you want it. The important entries in the log for this problem are: [7]b48.928 09/12/2006-13:20:44.552 [mqise GetNetBiosNameFromIPAddr] ERROR:Failed to get the NetBios name from the DNS name, error = 0xea [7]b48.928 09/12/2006-13:20:44.552 [mqise RPCToServer] ERROR:RPC call R_ProcessHTTPRequest failed, error code = 1702(RPC_S_INVALID_BINDING) which allow a Microsoft escalation engineer to check the MQISE source code to see what is going wrong. This problem according to the article occurs when the extension tries to bind to the local MSMQ service after the extension receives a POST request that contains an MSMQ message. MSMQ resolves the server name by using the DNS host name but the extension cannot bind to the service because the buffer that MSMQ uses to resolve the server name is too small - server names that are exactly 15 characters long will not fit. RPC exception 0x6a6 (RPC_S_INVALID_BINDING) occurs in the W3wp.exe process but the exception is handled and so you do not receive an error message. The workaround is to rename the MSMQ server to something less than 15 characters. If the problem has only just been noticed in a production environment - an application may have been modified to get through a newly-implemented firewall, for example - then renaming is going to be an issue. Other applications may need to be reinstalled or modified if server names are hard-coded or stored in the registry. The renaming may also break a company naming convention where the name is built up from something like location+department+number. If you want to learn more about MSMQ logging then check out Chapter 15 of the MSMQ FAQ. In fact, even if you DON'T want to learn anything about MSMQ logging you should read the FAQ anyway as there is a huge amount of useful information on known issues and the like.

    Read the article

  • Add Social Elements to Your Gmail Contacts with Rapportive

    - by Matthew Guay
    Would you like to discover more about your contacts?  Xobni is a great tool for this in Outlook, and thanks to a small plugin for Gmail, you can get similar functionality right from your favorite webmail app. Setup Rapportive on Your Gmail Browse to the Rapportive site (link below), and click install to add it to your browser.  Rapportive currently only supports Firefox and Google Chrome.  In this test, we installed it on Google Chrome.  Notice that Chrome warns Rapportive may access your private data from Gmail, though Rapportive says that they only use this data securely on your computer or their servers. Next time you log into Gmail, open a message to see the new Rapportive sidebar.  Click Log in to get started. Choose if you want to let Rapportive to access your data. Finally, choose whether to stay logged into Rapportive or to log out when you log out of Gmail.   Using Rapportive Now, when you open an email, you should see more information about your contact on the right side of the message where you usually see Google AdSense ads. You may see an avatar, short bio, and links to their social networks.  You can add notes about a contact also, which lets you use Rapportive as a CRM. You may see more information on some contacts.  Here we see a contact that shows recent Tweets and links to several social networks. Take Rapportive Further You can add more features to Rapportive with Raplets, which are small extensions that add more information or CRM functionality.  To add these, click the Rapportive button on the top of Gmail, and select Add Raplets to Rapportive. Find a Raplet you want, and click Add This. A popup will open to give you more information about the Raplet; click the Add button at the bottom if you still want it. And, if you’re wish to close Rapportive without logging out of Gmail, click the Rapportive link in Gmail and select Log out. Conclusion Whether you want to find out more about your contacts or keep track of notes about them, Rapportive is a great way to do this from Gmail.  With tools like this, Gmail gets a bit more powerful and feels more like a desktop application. If you would like this type of functionality in Outlook, check out our article on how to power up Outlook’s search and contacts with Xobni. Add Rapportive to Gmail Similar Articles Productive Geek Tips How to Import Gmail Contacts Into Outlook 2007Enhance Your Gmail Account in ChromeFigure out which Online accounts are selling your email to spammersAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogFix for New Contact Group Button Not Displaying in Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools

    Read the article

  • BIP BIServer Query Debug

    - by Tim Dexter
    With some help from Bryan, I have uncovered a way of being able to debug or at least log what BIServer is doing when BIP sends it a query request. This is not for those of you querying the database directly but if you are using the BIServer and its datamodel to fetch data for a BIP report. If you have written or used the query builder against BIServer and when you run the report it chokes with a cryptic message, that you have no clue about, read on. When BIP runs a piece of BIServer logical SQL to fetch data. It does not appear to validate it, it just passes it through, so what is BIServer doing on its end? As you may know, you are not writing regular physical sql its actually logical sql e.g. select Jobs."Job Title" as "Job Title", Employees."Last Name" as "Last Name", Employees.Salary as Salary, Locations."Department Name" as "Department Name", Locations."Country Name" as "Country Name", Locations."Region Name" as "Region Name" from HR.Locations Locations, HR.Employees Employees, HR.Jobs Jobs The tables might not even be a physical tables, we don't care, that's what the BIServer and its model are for. You have put all the effort into building the model, just go get me the data from where ever it might be. The BIServer takes the logical sql and uses its vast brain to work out what the physical SQL is, executes it and passes the result back to BIP. select distinct T32556.JOB_TITLE as c1, T32543.LAST_NAME as c2, T32543.SALARY as c3, T32537.DEPARTMENT_NAME as c4, T32532.COUNTRY_NAME as c5, T32577.REGION_NAME as c6 from JOBS T32556, REGIONS T32577, COUNTRIES T32532, LOCATIONS T32569, DEPARTMENTS T32537, EMPLOYEES T32543 where ( T32532.COUNTRY_ID = T32569.COUNTRY_ID and T32532.REGION_ID = T32577.REGION_ID and T32537.DEPARTMENT_ID = T32543.DEPARTMENT_ID and T32537.LOCATION_ID = T32569.LOCATION_ID and T32543.JOB_ID = T32556.JOB_ID ) Not a very tough example I know but you get the idea. How do I know what the BIServer is up to? How can I find out what the issue might be if BIServer chokes on my query? There are a couple of steps: In the Administrator tool you need to set the logging level for the Administrator user to something greater than the default '0'. '7' is going to give you the max. Just remember to take it back down after you have finished the debug. I needed to bounce my BIServer service Now here's the secret sauce. Prefix the following to your BIP query set variable LOGLEVEL = 7; Set the log level to that you have in the admin tool Now run your BIP report. With the prefix in place; BIServer will write to the NQQuery.log file. This is located in the ./OracleBI/server/Log directory. In there you are going to find the complete process the BIServer has gone through to try and get the data back for you A quick note, if the BIServer can, its going to hit that great BIEE cache to get your data and you may not see the full log. IF this is the case. Get inot hte Administration page (via the browser login) and clear out your BIP report cursor. Then re-run. This will hopefully help out if you are trying to debug that annoying BIP report that will not run or is getting some strange data. Don't forget to turn that logging level back down once you are done. This will avoid the DBA screaming at you for sucking up all the disk space on the system.

    Read the article

  • Integration Patterns with Azure Service Bus Relay, Part 3.5: Node.js relay

    - by Elton Stoneman
    This is an extension to Part 3 in the IPASBR series, see also: Integration Patterns with Azure Service Bus Relay, Part 1: Exposing the on-premise service Integration Patterns with Azure Service Bus Relay, Part 2: Anonymous full-trust .NET consumer Integration Patterns with Azure Service Bus Relay, Part 3: Anonymous partial-trust consumer In Part 3 I said “there isn't actually a .NET requirement here”, and this post just follows up on that statement. In Part 3 we had an ASP.NET MVC Website making a REST call to an Azure Service Bus service; to show that the REST stuff is really interoperable, in this version we use Node.js to make the secure service call. The code is on GitHub here: IPASBR Part 3.5. The sample code is simpler than Part 3 - rather than code up a UI in Node.js, the sample just relays the REST service call out to Azure. The steps are the same as Part 3: REST call to ACS with the service identity credentials, which returns an SWT; REST call to Azure Service Bus Relay, presenting the SWT; request gets relayed to the on-premise service. In Node.js the authentication step looks like this: var options = { host: acs.namespace() + '-sb.accesscontrol.windows.net', path: '/WRAPv0.9/', method: 'POST' }; var values = { wrap_name: acs.issuerName(), wrap_password: acs.issuerSecret(), wrap_scope: 'http://' + acs.namespace() + '.servicebus.windows.net/' }; var req = https.request(options, function (res) { console.log("statusCode: ", res.statusCode); console.log("headers: ", res.headers); res.on('data', function (d) { var token = qs.parse(d.toString('utf8')); callback(token.wrap_access_token); }); }); req.write(qs.stringify(values)); req.end(); Once we have the token, we can wrap it up into an Authorization header and pass it to the Service Bus call: token = 'WRAP access_token=\"' + swt + '\"'; //... var reqHeaders = { Authorization: token }; var options = { host: acs.namespace() + '.servicebus.windows.net', path: '/rest/reverse?string=' + requestUrl.query.string, headers: reqHeaders }; var req = https.request(options, function (res) { console.log("statusCode: ", res.statusCode); console.log("headers: ", res.headers); response.writeHead(res.statusCode, res.headers); res.on('data', function (d) { var reversed = d.toString('utf8') console.log('svc returned: ' + d.toString('utf8')); response.end(reversed); }); }); req.end(); Running the sample Usual routine to add your own Azure details into Solution Items\AzureConnectionDetails.xml and “Run Custom Tool” on the .tt files. Build and you should be able to navigate to the on-premise service at http://localhost/Sixeyed.Ipasbr.Services/FormatService.svc/rest/reverse?string=abc123 and get a string response, going to the service direct. Install Node.js (v0.8.14 at time of writing), run FormatServiceRelay.cmd, navigate to http://localhost:8013/reverse?string=abc123, and you should get exactly the same response but through Node.js, via Azure Service Bus Relay to your on-premise service. The console logs the WRAP token returned from ACS and the response from Azure Service Bus Relay which it forwards:

    Read the article

  • 5.1 surround sound on Acer Aspire 5738ZG with Ubuntu 11.10

    - by kbargais_LV
    I got a problem with sound. I tried everything but no results. :( I got 3 sound ports. my daemon: # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0

    Read the article

  • Move a sphere along the swipe?

    - by gameOne
    I am trying to get a sphere curl based on the swipe. I know this has been asked many times, but still it's yearning to be answered. I have managed to add force on the direction of the swipe and it works near perfect. I also have all the swipe positions stored in a list. Now I would like to know how can the curl be achieved. I believe the the curve in the swipe can be calculated by the Vector dot product If theta is 0, then there is no need to add the swipe. If it is not, then add the curl. Maybe this condition is redundant if I managed to find how to curl the sphere along the swipe position The code that adds the force to sphere based on the swipe direction is as below: using UnityEngine; using System.Collections; using System.Collections.Generic; public class SwipeControl : MonoBehaviour { //First establish some variables private Vector3 fp; //First finger position private Vector3 lp; //Last finger position private Vector3 ip; //some intermediate finger position private float dragDistance; //Distance needed for a swipe to register public float power; private Vector3 footballPos; private bool canShoot = true; private float factor = 40f; private List<Vector3> touchPositions = new List<Vector3>(); void Start(){ dragDistance = Screen.height*20/100; Physics.gravity = new Vector3(0, -20, 0); footballPos = transform.position; } // Update is called once per frame void Update() { //Examine the touch inputs foreach (Touch touch in Input.touches) { /*if (touch.phase == TouchPhase.Began) { fp = touch.position; lp = touch.position; }*/ if (touch.phase == TouchPhase.Moved) { touchPositions.Add(touch.position); } if (touch.phase == TouchPhase.Ended) { fp = touchPositions[0]; lp = touchPositions[touchPositions.Count-1]; ip = touchPositions[touchPositions.Count/2]; //First check if it's actually a drag if (Mathf.Abs(lp.x - fp.x) > dragDistance || Mathf.Abs(lp.y - fp.y) > dragDistance) { //It's a drag //Now check what direction the drag was //First check which axis if (Mathf.Abs(lp.x - fp.x) > Mathf.Abs(lp.y - fp.y)) { //If the horizontal movement is greater than the vertical movement... if ((lp.x>fp.x) && canShoot) //If the movement was to the right) { //Right move float x = (lp.x - fp.x) / Screen.height * factor; rigidbody.AddForce((new Vector3(x,10,16))*power); Debug.Log("right "+(lp.x-fp.x));//MOVE RIGHT CODE HERE canShoot = false; //rigidbody.AddForce((new Vector3((lp.x-fp.x)/30,10,16))*power); StartCoroutine(ReturnBall()); } else { //Left move float x = (lp.x - fp.x) / Screen.height * factor; rigidbody.AddForce((new Vector3(x,10,16))*power); Debug.Log("left "+(lp.x-fp.x));//MOVE LEFT CODE HERE canShoot = false; //rigidbody.AddForce(new Vector3((lp.x-fp.x)/30,10,16)*power); StartCoroutine(ReturnBall()); } } else { //the vertical movement is greater than the horizontal movement if (lp.y>fp.y) //If the movement was up { //Up move float y = (lp.y-fp.y)/Screen.height*factor; float x = (lp.x - fp.x) / Screen.height * factor; rigidbody.AddForce((new Vector3(x,y,16))*power); Debug.Log("up "+(lp.x-fp.x));//MOVE UP CODE HERE canShoot = false; //rigidbody.AddForce(new Vector3((lp.x-fp.x)/30,10,16)*power); StartCoroutine(ReturnBall()); } else { //Down move Debug.Log("down "+lp+" "+fp);//MOVE DOWN CODE HERE } } } else { //It's a tap Debug.Log("none");//TAP CODE HERE } } } } IEnumerator ReturnBall() { yield return new WaitForSeconds(5.0f); rigidbody.velocity = Vector3.zero; rigidbody.angularVelocity = Vector3.zero; transform.position = footballPos; canShoot =true; isKicked = false; } }

    Read the article

  • vmware player xorg driver broke after ubuntu 12.04 LTS automatic system update on 06/07/2014

    - by user291828
    I am running Ubuntu 12.04 LTS as a virtual machine on a Windows 7 host using vmware player 6.0.2. On Sat. 06/07/2014, Ubuntu performed an automatic system update as it does regularly, however after reboot, the display driver seems to be broken which causes the screen to split into many identical panels. This pretty much rendered the VM unusable. Below is the log entry for that update from /var/log/apt/history.log It appears that at least one of these updates have caused this problem. The exact same problem has been reported on the vmware forum as well, see https://communities.vmware.com/message/2388776#2388776 So far I have not been able so find a solution. Content in /var/log/apt/history.log Start-Date: 2014-06-07 15:04:46 Commandline: aptdaemon role='role-commit-packages' sender=':1.65' Install: linux-headers-3.2.0-64:amd64 (3.2.0-64.97), linux-image-3.2.0-64-generic:amd64 (3.2.0-64.97), linux-headers-3.2.0-64-generic:amd64 (3.2.0-64.97) Upgrade: iproute:amd64 (20111117-1ubuntu2.1, 20111117-1ubuntu2.3), libknewstuff3-4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdeclarative5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libnepomukquery4a:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libgnutls-openssl27:amd64 (2.12.14-5ubuntu3.7, 2.12.14-5ubuntu3.8), libthreadweaver4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdecore5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libnepomukutils4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libktexteditor4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), linux-generic:amd64 (3.2.0.63.75, 3.2.0.64.76), libkmediaplayer4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkrosscore4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libgnutls26:amd64 (2.12.14-5ubuntu3.7, 2.12.14-5ubuntu3.8), libgnutls26:i386 (2.12.14-5ubuntu3.7, 2.12.14-5ubuntu3.8), libsolid4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libnepomuk4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdnssd4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkparts4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), kdoctools:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libssl-dev:amd64 (1.0.1-4ubuntu5.13, 1.0.1-4ubuntu5.14), libssl-doc:amd64 (1.0.1-4ubuntu5.13, 1.0.1-4ubuntu5.14), libkidletime4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), linux-headers-generic:amd64 (3.2.0.63.75, 3.2.0.64.76), linux-image-generic:amd64 (3.2.0.63.75, 3.2.0.64.76), libkcmutils4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkfile4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkpty4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkntlm4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libplasma3:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkemoticons4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), kdelibs-bin:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdewebkit5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkjsembed4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkio5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkjsapi4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), openssl:amd64 (1.0.1-4ubuntu5.13, 1.0.1-4ubuntu5.14), kdelibs5-data:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), linux-libc-dev:amd64 (3.2.0-63.95, 3.2.0-64.97), libkde3support4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libknotifyconfig4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), kdelibs5-plugins:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkhtml5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdeui5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdesu5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libssl1.0.0:amd64 (1.0.1-4ubuntu5.13, 1.0.1-4ubuntu5.14), libssl1.0.0:i386 (1.0.1-4ubuntu5.13, 1.0.1-4ubuntu5.14) End-Date: 2014-06-07 15:09:08

    Read the article

  • Logging errors caused by exceptions deep in the application

    - by Kaleb Pederson
    What are best-practices for logging deep within an application's source? Is it bad practice to have multiple event log entries for a single error? For example, let's say that I have an ETL system whose transform step involves: a transformer, pipeline, processing algorithm, and processing engine. In brief, the transformer takes in an input file, parses out records, and sends the records through the pipeline. The pipeline aggregates the results of the processing algorithm (which could do serial or parallel processing). The processing algorithm sends each record through one or more processing engines. So, I have at least four levels: Transformer - Pipeline - Algorithm - Engine. My code might then look something like the following: class Transformer { void Process(InputSource input) { try { var inRecords = _parser.Parse(input.Stream); var outRecords = _pipeline.Transform(inRecords); } catch (Exception ex) { var inner = new ProcessException(input, ex); _logger.Error("Unable to parse source " + input.Name, inner); throw inner; } } } class Pipeline { IEnumerable<Result> Transform(IEnumerable<Record> records) { // NOTE: no try/catch as I have no useful information to provide // at this point in the process var results = _algorithm.Process(records); // examine and do useful things with results return results; } } class Algorithm { IEnumerable<Result> Process(IEnumerable<Record> records) { var results = new List<Result>(); foreach (var engine in Engines) { foreach (var record in records) { try { engine.Process(record); } catch (Exception ex) { var inner = new EngineProcessingException(engine, record, ex); _logger.Error("Engine {0} unable to parse record {1}", engine, record); throw inner; } } } } } class Engine { Result Process(Record record) { for (int i=0; i<record.SubRecords.Count; ++i) { try { Validate(record.subRecords[i]); } catch (Exception ex) { var inner = new RecordValidationException(record, i, ex); _logger.Error( "Validation of subrecord {0} failed for record {1}", i, record ); } } } } There's a few important things to notice: A single error at the deepest level causes three log entries (ugly? DOS?) Thrown exceptions contain all important and useful information Logging only happens when failure to do so would cause loss of useful information at a lower level. Thoughts and concerns: I don't like having so many log entries for each error I don't want to lose important, useful data; the exceptions contain all the important but the stacktrace is typically the only thing displayed besides the message. I can log at different levels (e.g., warning, informational) The higher level classes should be completely unaware of the structure of the lower-level exceptions (which may change as the different implementations are replaced). The information available at higher levels should not be passed to the lower levels. So, to restate the main questions: What are best-practices for logging deep within an application's source? Is it bad practice to have multiple event log entries for a single error?

    Read the article

  • How do I get 5.1 surround sound working on an Acer Aspire 5738ZG?

    - by kbargais_LV
    I got a problem with sound. I tried everything but no results. :( I got 3 sound ports. my daemon: # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0

    Read the article

  • Error 0x800f0922 installing .NET 3.5 on Windows 8

    - by Benjamin Nolan
    I'm trying to install .NET 3.5 on my Windows 8 box and it keeps throwing Error 0x800f0922 at me. From what I've read on answers.microsoft.com and StackOverflow I gather the easiest way to fix this is to perform a system refresh, however this will remove all software I've installed from discs. I've just moved house, so I'd rather not do that as I don't know where all the installation media actually are for a lot of my software, so if possible I'd prefer to track down where the problem is actually occurring. (Also, I have a LOT of software installed. It'd take me a long time to reinstall it all, and I unfortunately haven't got that time.) The on-demand error screen sends me to KB2734782 (can't link it as I'm <10 rep), which doesn't help much. When I run this DISM line from the StackOverflow post: Dism.exe /online /enable-feature /featurename:NetFX3 /All /Source:C:\Windows\WinSxS /LimitAccess I get the following output on the terminal: Microsoft Windows [Version 6.2.9200] (c) 2012 Microsoft Corporation. All rights reserved. C:\Windows\system32>Dism.exe /online /enable-feature /featurename:NetFX3 /All /Source:C:\Windows\WinSxS /LimitAccess Deployment Image Servicing and Management tool Version: 6.2.9200.16384 Image Version: 6.2.9200.16384 Enabling feature(s) [==========================100.0%==========================] Error: 0x800f0922 DISM failed. No operation was performed. For more information, review the log file. The DISM log file can be found at C:\Windows\Logs\DISM\dism.log C:\Windows\system32> Incidentally, it jumps straight from 0 to 100% and then sits on that line for about 5 minutes before the error line occurs. dism.log contains the following lines around that time: (Link to full logs is at bottom of post) 2013-07-02 00:56:58, Info DISM DISM.EXE: Succesfully registered commands for the provider: Edition Manager. 2013-07-02 00:56:58, Info DISM DISM Provider Store: PID=5768 TID=5780 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider 2013-07-02 00:56:58, Info DISM DISM Provider Store: PID=5768 TID=5780 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider 2013-07-02 00:56:58, Info DISM DISM Package Manager: PID=5768 TID=5780 Processing the top level command token(enable-feature). - CPackageManagerCLIHandler::Private_ValidateCmdLine 2013-07-02 00:56:58, Info DISM DISM Package Manager: PID=5768 TID=5780 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine 2013-07-02 00:56:58, Info DISM DISM Package Manager: PID=5768 TID=5780 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine 2013-07-02 00:56:58, Info DISM DISM Package Manager: PID=5768 TID=5780 Encountered the option "featurename" with value "NetFX3" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine 2013-07-02 00:56:58, Info DISM DISM Package Manager: PID=5768 TID=5780 Encountered an unknown option "featurename" with value "NetFX3" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine 2013-07-02 00:56:58, Info DISM DISM Package Manager: PID=5768 TID=5780 Encountered the option "source" with value "C:\Windows\WinSxS" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine 2013-07-02 00:56:58, Info DISM DISM Package Manager: PID=5768 TID=5780 Encountered an unknown option "source" with value "C:\Windows\WinSxS" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine 2013-07-02 00:56:59, Info DISM DISM Package Manager: PID=5768 TID=5780 Initiating Changes on Package with values: 5, 7 - CDISMPackage::Internal_ChangePackageState 2013-07-02 00:56:59, Info DISM DISM Package Manager: PID=5768 TID=5780 CBS session options=0x20100! - CDISMPackageManager::Internal_Finalize 2013-07-02 01:00:27, Info DISM DISM Package Manager: PID=5768 TID=2420 Error in operation: (null) (CBS HRESULT=0x800f0922) - CCbsConUIHandler::Error 2013-07-02 01:00:27, Error DISM DISM Package Manager: PID=5768 TID=5780 Failed finalizing changes. - CDISMPackageManager::Internal_Finalize(hr:0x800f0922) 2013-07-02 01:00:27, Error DISM DISM Package Manager: PID=5768 TID=5780 Failed processing package changes with session options - CDISMPackageManager::ProcessChangesWithOptions(hr:0x800f0922) 2013-07-02 01:00:27, Error DISM DISM Package Manager: PID=5768 TID=5780 Failed ProcessChanges. - CPackageManagerCLIHandler::Private_ProcessFeatureChange(hr:0x800f0922) 2013-07-02 01:00:27, Error DISM DISM Package Manager: PID=5768 TID=5780 Failed while processing command enable-feature. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x800f0922) 2013-07-02 01:00:27, Info DISM DISM Package Manager: PID=5768 TID=5780 Further logs for online package and feature related operations can be found at %WINDIR%\logs\CBS\cbs.log - CPackageManagerCLIHandler::ExecuteCmdLine 2013-07-02 01:00:27, Error DISM DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=800F0922 cbs.log has the following chunks around then which could be relevant: 2013-07-02 00:55:06, Info CBS Exec: This is a PSF Package. Job has been saved and we are returning to client. 2013-07-02 00:55:06, Info CSI 0000042d@2013/7/1:23:55:06.203 CSI Transaction @0xe2f5e59500 destroyed 2013-07-02 00:55:06, Info CBS Exec: DPX job state saved for one or more packages, aborting the staging and install of execution. 2013-07-02 00:55:06, Info CSI 0000042e@2013/7/1:23:55:06.207 CSI Transaction @0xe2f5e58480 destroyed 2013-07-02 00:55:06, Info CBS Perf: Stage chain complete. 2013-07-02 00:55:06, Info CBS Failed to stage execution chain. [HRESULT = 0x800f0816 - CBS_E_DPX_JOB_STATE_SAVED] 2013-07-02 00:55:06, Info CBS Failed to process single phase execution. [HRESULT = 0x800f0816 - CBS_E_DPX_JOB_STATE_SAVED] 2013-07-02 00:55:06, Info CBS WER: Failure is not worth reporting [HRESULT = 0x800f0816 - CBS_E_DPX_JOB_STATE_SAVED] 2013-07-02 00:55:06, Info CBS Reboot mark cleared and further down: 2013-07-02 00:59:19, Info CSI 000004e6 Begin executing advanced installer phase 38 (0x00000026) index 253 (0x00000000000000fd) (sequence 289) Old component: [l:0]"" New component: [ml:306{153},l:304{152}]"NetFx35CDF-CDF_GenericCommands, Culture=neutral, Version=6.2.9200.16384, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=x86, versionScope=NonSxS" Install mode: install Installer ID: {81a34a10-4256-436a-89d6-794b97ca407c} Installer name: [15]"Generic Command" 2013-07-02 00:59:19, Info CSI 000004e7 Performing 1 operations; 1 are not lock/unlock and follow: (0) LockComponentPath (10): flags: 0 comp: {l:16 b:19fc6600b776ce01c91f0000fc07a816} pathid: {l:16 b:19fc6600b776ce01ca1f0000fc07a816} path: [l:214{107}]"\SystemRoot\WinSxS\x86_netfx35cdf-cdf_genericcommands_31bf3856ad364e35_6.2.9200.16384_none_0cec490be12fb858" pid: 7fc starttime: 130171962799582915 (0x01ce76b5e2626ec3) 2013-07-02 00:59:19, Info CSI 000004e8 Performing 1 operations; 1 are not lock/unlock and follow: (0) LockComponentPath (10): flags: 0 comp: {l:16 b:27236700b776ce01cb1f0000fc07a816} pathid: {l:16 b:27236700b776ce01cc1f0000fc07a816} path: [l:210{105}]"\SystemRoot\WinSxS\x86_netfx35cdf-csd_cdf_installer_31bf3856ad364e35_6.2.9200.16384_none_55072425fd5c3716" pid: 7fc starttime: 130171962799582915 (0x01ce76b5e2626ec3) 2013-07-02 00:59:19, Info CSI 000004e9 Calling generic command executable (sequence 1): [122]"C:\Windows\WinSxS\x86_netfx35cdf-csd_cdf_installer_31bf3856ad364e35_6.2.9200.16384_none_55072425fd5c3716\WFServicesReg.exe" CmdLine: [139]""C:\Windows\WinSxS\x86_netfx35cdf-csd_cdf_installer_31bf3856ad364e35_6.2.9200.16384_none_55072425fd5c3716\WFServicesReg.exe" /c /b /v /m /i" 2013-07-02 00:59:20, Info CSI 000004ea Performing 1 operations; 1 are not lock/unlock and follow: (0) LockComponentPath (10): flags: 0 comp: {l:16 b:bd790401b776ce01cd1f0000fc07a816} pathid: {l:16 b:bd790401b776ce01ce1f0000fc07a816} path: [l:234{117}]"\SystemRoot\WinSxS\x86_microsoft.windows.s..ation.badcomponents_31bf3856ad364e35_6.2.9200.16384_none_353ccb4c94858655" pid: 7fc starttime: 130171962799582915 (0x01ce76b5e2626ec3) 2013-07-02 00:59:20, Info CSI 000004eb Creating NT transaction (seq 27), objectname [6]"(null)" 2013-07-02 00:59:20, Info CSI 000004ec Created NT transaction (seq 27) result 0x00000000, handle @0x24b8 2013-07-02 00:59:20, Info CSI 000004ed@2013/7/1:23:59:20.933 Beginning NT transaction commit... 2013-07-02 00:59:22, Info CSI 000004ee@2013/7/1:23:59:22.065 CSI perf trace: CSIPERF:TXCOMMIT;1387723 2013-07-02 00:59:22, Error CSI 000004ef (F) Done with generic command 1; CreateProcess returned 0, CPAW returned S_OK Process exit code 255 (0x000000ff) resulted in success? FALSE Process output: [l:28479 [4096]"DDSet_Entry: WFServicesReg.exe DDSet_Status: CFxInstaller::CopyConfigFilesToTemp is64bit=0 DDSet_Status: CFileHelper::CopyConfigFilesToTempLocation DDSet_Status: CFxInstaller::SetupBaseComponents isInstall=1 DDSet_Status: CFxInstaller::SetupBaseComponents Calling SetupExtensions. isInstall=1 (0x000000FF -- The extended attributes are inconsistent. ??) And a bit further down: 2013-07-02 00:59:22, Error [0x018007] CSI 000004f0 (F) Failed execution of queue item Installer: Generic Command ({81a34a10-4256-436a-89d6-794b97ca407c}) with HRESULT HRESULT_FROM_WIN32(14109). Failure will not be ignored: A rollback will be initiated after all the operations in the installer queue are completed; installer is reliable (2)[gle=0x80004005] [...snip...] 2013-07-02 00:59:22, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND] 2013-07-02 00:59:28, Info CSI 000004f1@2013/7/1:23:59:28.467 CSI Advanced installer perf trace: CSIPERF:AIDONE;{81a34a10-4256-436a-89d6-794b97ca407c};NetFx35CDF-CDF_GenericCommands, Version = 6.2.9200.16384, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral;10609242us 2013-07-02 00:59:28, Info CSI 000004f2 End executing advanced installer (sequence 289) Completion status: HRESULT_FROM_WIN32(ERROR_ADVANCED_INSTALLER_FAILED) [...snip...] 2013-07-02 01:00:26, Info CBS Exec: Cancelled pending transactions after rollback. [HRESULT = 0x00000000 - S_OK] 2013-07-02 01:00:26, Error CBS Exec: An error occurred while committing the transaction, the transaction could not be rolled back. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED] The full DISM and CBS logs are at http://ben.mu/files/dotnet35_dism_cbs.zip as the CBS log is nearly 167MB uncompressed. o.o dism.log gives the timeframe of where its errors occur--00:56:20ish to 01:00:22. Does anyone have any ideas what's actually causing the installation to fail, and if so how I can fix it? Please don't just say "Refresh the OS". :)

    Read the article

  • ERR_INCOMPLETE_CHUNKED_ENCODING apache 2.4

    - by Bujanca Mihai
    I upgraded my Ubuntu server to 14.04 and Apache 2.4.7. Now my images don't load and console yields net::ERR_INCOMPLETE_CHUNKED_ENCODING. Also, I can sometimes see some of the images load for a little while (1 sec max) and then they disappear. .htaccess RewriteEngine On # Serve the favicon file from img folder RewriteCond %{REQUEST_URI} ^/favicon.ico$ RewriteRule ^(.*)$ /img/$1 [NC,L] # Redirect HTTP traffic to WWW subdomain RewriteCond %{HTTPS} off [NC] RewriteCond %{HTTP_HOST} !^www\. [NC] RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] # Redirect HTTPS traffic to WWW subdomain RewriteCond %{HTTPS} on [NC] RewriteCond %{HTTP_HOST} !^www\. [NC] RewriteRule ^(.*)$ https://www.%{HTTP_HOST}/$1 [R=301,L] # Auto Versioning rules RewriteCond %{REQUEST_FILENAME} !-s RewriteRule ^(.*)\.[\d]+\.(css|js)$ $1.$2 [L] # Default Zend rewrite rules RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] VHost <VirtualHost *:80> ServerAdmin admin@localhost ServerName localhost DocumentRoot /home/mihai/ARTD/www/public/website # Omit this in production environment SetEnv APPLICATION_ENV local <Directory /home/mihai/ARTD/www/public/website > Options Indexes FollowSymLinks MultiViews AllowOverride All #Order deny,allow #Allow from all Require all granted </Directory> <IfModule mod_php5.c> php_value memory_limit 128M php_value upload_max_filesize 20M php_value post_max_size 20M </IfModule> ErrorLog /var/log/apache2/ARTD-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/ARTD-access.log combined </VirtualHost> <IfModule mod_ssl.c> <VirtualHost *:443> ServerAdmin admin@localhost ServerName localhost DocumentRoot /home/mihai/ARTD/www/public/website # Omit this in production environment SetEnv APPLICATION_ENV local <Directory /home/mihai/ARTD/www/public/website > Options Indexes FollowSymLinks MultiViews AllowOverride All #Order deny,allow #Allow from all Require all granted </Directory> <IfModule mod_php5.c> php_value memory_limit 128M php_value upload_max_filesize 20M php_value post_max_size 20M </IfModule> ErrorLog /var/log/apache2/ARTD-ssl-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/ARTD.log combined # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # A self-signed (snakeoil) certificate can be created by installing # the ssl-cert package. See # /usr/share/doc/apache2.2-common/README.Debian.gz for more info. # If both key and certificate are stored in the same file, only the # SSLCertificateFile directive is needed. SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath /etc/ssl/certs/ #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt # Certificate Revocation Lists (CRL): # Set the CA revocation path where to find CA CRLs for client # authentication or alternatively one huge file containing all # of them (file must be PEM encoded) # Note: Inside SSLCARevocationPath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCARevocationPath /etc/apache2/ssl.crl/ #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # o FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # o ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # o StdEnvVars: # This exports the standard SSL/TLS related `SSL_*' environment variables. # Per default this exportation is switched off for performance reasons, # because the extraction step is an expensive operation and is usually # useless for serving static content. So one usually enables the # exportation for CGI and SSI requests only. # o StrictRequire: # This denies access when "SSLRequireSSL" or "SSLRequire" applied even # under a "Satisfy any" situation, i.e. when it applies access is denied # and no other module can change it. # o OptRenegotiate: # This enables optimized SSL connection renegotiation handling when SSL # directives are used in per-directory context. #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire #<FilesMatch "\.(cgi|shtml|phtml|php)$"> # SSLOptions +StdEnvVars #</FilesMatch> # SSL Protocol Adjustments: # The safe and default but still SSL/TLS standard compliant shutdown # approach is that mod_ssl sends the close notify alert but doesn't wait for # the close notify alert from client. When you need a different shutdown # approach you can use one of the following variables: # o ssl-unclean-shutdown: # This forces an unclean shutdown when the connection is closed, i.e. no # SSL close notify alert is send or allowed to received. This violates # the SSL/TLS standard but is needed for some brain-dead browsers. Use # this when you receive I/O errors because of the standard approach where # mod_ssl sends the close notify alert. # o ssl-accurate-shutdown: # This forces an accurate shutdown when the connection is closed, i.e. a # SSL close notify alert is send and mod_ssl waits for the close notify # alert of the client. This is 100% SSL/TLS standard compliant, but in # practice often causes hanging connections with brain-dead browsers. Use # this only for browsers where you know that their SSL implementation # works correctly. # Notice: Most problems of broken clients are also related to the HTTP # keep-alive facility, so you usually additionally want to disable # keep-alive for those clients, too. Use variable "nokeepalive" for this. # Similarly, one has to force some clients to use HTTP/1.0 to workaround # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and # "force-response-1.0" for this. #BrowserMatch ".*MSIE.*" \ # nokeepalive ssl-unclean-shutdown \ # downgrade-1.0 force-response-1.0 </VirtualHost> </IfModule> logs Apache/2.4.7 (Ubuntu) PHP/5.5.9-1ubuntu4.3 OpenSSL/1.0.1f (internal dummy connection) 127.0.0.1 - - [25/Aug/2014:13:09:53 +0300] "GET /img/header/top-nav-separator.png HTTP/1.1" 200 462 "https://localhost/art" "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/34.0.1847.132 Safari/537.36"

    Read the article

  • ProFTPd server on Ubuntu getting access denied message when successfully authenticated?

    - by exxoid
    I have a Ubuntu box with a ProFTPD 1.3.4a Server, when I try to log in via my FTP Client I cannot do anything as it does not allow me to list directories; I have tried logging in as root and as a regular user and tried accessing different paths within the FTP Server. The error I get in my FTP Client is: Status: Retrieving directory listing... Command: CDUP Response: 250 CDUP command successful Command: PWD Response: 257 "/var" is the current directory Command: PASV Response: 227 Entering Passive Mode (172,16,4,22,237,205). Command: MLSD Response: 550 Access is denied. Error: Failed to retrieve directory listing Any idea? Here is the config of my proftpd: # # /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file. # To really apply changes, reload proftpd after modifications, if # it runs in daemon mode. It is not required in inetd/xinetd mode. # # Includes DSO modules Include /etc/proftpd/modules.conf # Set off to disable IPv6 support which is annoying on IPv4 only boxes. UseIPv6 off # If set on you can experience a longer connection delay in many cases. IdentLookups off ServerName "Drupal Intranet" ServerType standalone ServerIdent on "FTP Server ready" DeferWelcome on # Set the user and group that the server runs as User nobody Group nogroup MultilineRFC2228 on DefaultServer on ShowSymlinks on TimeoutNoTransfer 600 TimeoutStalled 600 TimeoutIdle 1200 DisplayLogin welcome.msg DisplayChdir .message true ListOptions "-l" DenyFilter \*.*/ # Use this to jail all users in their homes # DefaultRoot ~ # Users require a valid shell listed in /etc/shells to login. # Use this directive to release that constrain. # RequireValidShell off # Port 21 is the standard FTP port. Port 21 # In some cases you have to specify passive ports range to by-pass # firewall limitations. Ephemeral ports can be used for that, but # feel free to use a more narrow range. # PassivePorts 49152 65534 # If your host was NATted, this option is useful in order to # allow passive tranfers to work. You have to use your public # address and opening the passive ports used on your firewall as well. # MasqueradeAddress 1.2.3.4 # This is useful for masquerading address with dynamic IPs: # refresh any configured MasqueradeAddress directives every 8 hours <IfModule mod_dynmasq.c> # DynMasqRefresh 28800 </IfModule> # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 30 # Set the user and group that the server normally runs at. # Umask 022 is a good standard umask to prevent new files and dirs # (second parm) from being group and world writable. Umask 022 022 # Normally, we want files to be overwriteable. AllowOverwrite on # Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords: # PersistentPasswd off # This is required to use both PAM-based authentication and local passwords AuthPAMConfig proftpd AuthOrder mod_auth_pam.c* mod_auth_unix.c # Be warned: use of this directive impacts CPU average load! # Uncomment this if you like to see progress and transfer rate with ftpwho # in downloads. That is not needed for uploads rates. # UseSendFile off TransferLog /var/log/proftpd/xferlog SystemLog /var/log/proftpd/proftpd.log # Logging onto /var/log/lastlog is enabled but set to off by default #UseLastlog on # In order to keep log file dates consistent after chroot, use timezone info # from /etc/localtime. If this is not set, and proftpd is configured to # chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight # savings timezone regardless of whether DST is in effect. #SetEnv TZ :/etc/localtime <IfModule mod_quotatab.c> QuotaEngine off </IfModule> <IfModule mod_ratio.c> Ratios off </IfModule> # Delay engine reduces impact of the so-called Timing Attack described in # http://www.securityfocus.com/bid/11430/discuss # It is on by default. <IfModule mod_delay.c> DelayEngine on </IfModule> <IfModule mod_ctrls.c> ControlsEngine off ControlsMaxClients 2 ControlsLog /var/log/proftpd/controls.log ControlsInterval 5 ControlsSocket /var/run/proftpd/proftpd.sock </IfModule> <IfModule mod_ctrls_admin.c> AdminControlsEngine off </IfModule> # # Alternative authentication frameworks # #Include /etc/proftpd/ldap.conf #Include /etc/proftpd/sql.conf # # This is used for FTPS connections # #Include /etc/proftpd/tls.conf # # Useful to keep VirtualHost/VirtualRoot directives separated # #Include /etc/proftpd/virtuals.con # A basic anonymous configuration, no upload directories. # <Anonymous ~ftp> # User ftp # Group nogroup # # We want clients to be able to login with "anonymous" as well as "ftp" # UserAlias anonymous ftp # # Cosmetic changes, all files belongs to ftp user # DirFakeUser on ftp # DirFakeGroup on ftp # # RequireValidShell off # # # Limit the maximum number of anonymous logins # MaxClients 10 # # # We want 'welcome.msg' displayed at login, and '.message' displayed # # in each newly chdired directory. # DisplayLogin welcome.msg # DisplayChdir .message # # # Limit WRITE everywhere in the anonymous chroot # <Directory *> # <Limit WRITE> # DenyAll # </Limit> # </Directory> # # # Uncomment this if you're brave. # # <Directory incoming> # # # Umask 022 is a good standard umask to prevent new files and dirs # # # (second parm) from being group and world writable. # # Umask 022 022 # # <Limit READ WRITE> # # DenyAll # # </Limit> # # <Limit STOR> # # AllowAll # # </Limit> # # </Directory> # # </Anonymous> # Include other custom configuration files Include /etc/proftpd/conf.d/ UseReverseDNS off <Global> RootLogin on UseFtpUsers on ServerIdent on DefaultChdir /var/www DeleteAbortedStores on LoginPasswordPrompt on AccessGrantMsg "You have been authenticated successfully." </Global> Any idea what could be wrong? Thanks for your help!

    Read the article

  • Android - Querying the SMS ContentProvider?

    - by Donal Rafferty
    I currently register a content observer on the following URI "content://sms/" to listen out for incoming and outgoing messages being sent. This seems to work ok and I have also tried deleting from the sms database but I can only delete an entire thread from the following URI "content://sms/conversations/" Here is the code I use for that String url = "content://sms/"; Uri uri = Uri.parse(url); getContentResolver().registerContentObserver(uri, true, new MyContentObserver(handler)); } class MyContentObserver extends ContentObserver { public MyContentObserver(Handler handler) { super(handler); } @Override public boolean deliverSelfNotifications() { return false; } @Override public void onChange(boolean arg0) { super.onChange(arg0); Log.v("SMS", "Notification on SMS observer"); Message msg = new Message(); msg.obj = "xxxxxxxxxx"; handler.sendMessage(msg); Uri uriSMSURI = Uri.parse("content://sms/"); Cursor cur = getContentResolver().query(uriSMSURI, null, null, null, null); cur.moveToNext(); String protocol = cur.getString(cur.getColumnIndex("protocol")); if(protocol == null){ Log.d("SMS", "SMS SEND"); int threadId = cur.getInt(cur.getColumnIndex("thread_id")); Log.d("SMS", "SMS SEND ID = " + threadId); Cursor c = getContentResolver().query(Uri.parse("content://sms/outbox/" + threadId), null, null, null, null); c.moveToNext(); int p = cur.getInt(cur.getColumnIndex("person")); Log.d("SMS", "SMS SEND person= " + p); //getContentResolver().delete(Uri.parse("content://sms/outbox/" + threadId), null, null); } else{ Log.d("SMS", "SMS RECIEVE"); int threadIdIn = cur.getInt(cur.getColumnIndex("thread_id")); getContentResolver().delete(Uri.parse("content://sms/outbox/" + threadIdIn), null, null); } } } However I want to be able to get the recipricant and the message text from the SMS Content Provider, can anyone tell me how to do this? And also how to delete one message instead of an entire thread?

    Read the article

  • CodePlex Daily Summary for Monday, March 01, 2010

    CodePlex Daily Summary for Monday, March 01, 2010New ProjectsActiveWorlds World Server Admin PowerShell SnapIn: The purpose of this PowerShell SnapIn is to provide a set of tools to administer the world server from PowerShell. It leverages the ActiveWorlds S...AWS SimpleDB Browser: A basic GUI browser tool for inspection and querying of a SimpleDB.Desktop Dimmer: A simple application for dimming the desktop around windows, videos, or other media.Disk Defuzzer: Compare chaos of files and folders with customizable SQL queries. This little application scans files in any two folders, generates data in an A...Dynamic Configuration: Dynamic configuration is a (very) small library to provide an API compatible replacement for the System.Configuration.ConfigurationManager class so...Expression Encoder 3 Visual Basic Samples: Visual Basic Sample code that calls the Expression Encoder 3 object model.Extended Character Keyboard: An lightweight onscreen keyboard that allows you to enter special characters like "á" and "û". Also supports adding of 7 custom buttons.FileHasher: This project provides a simple tool for generating and verifying file hashes. I created this to help the QA team I work with. The project is all C#...Fluent Assertions: Fluent interface for writing more natural specifying assertions with more clarity than the traditional assertion syntax such as offered by MSTest, ...Foursquare BlogEngine Widget: A Basic Widget for BlogEngine which displays the last foursquare Check-insGraffiti CMS Events Plugin: Plugin for Graffiti CMS that allows creating Event posts and rendering an Event CalendarHeadCounter: HeadCounter is a raid attendance and loot tracking application for World of Warcraft.HRM Core (QL Nhan Su): This is software about Human Resource Management in Viet Nam ------------ Đây là phần mềm Quản lý nhân sự tiền lương ở Việt Nam (Nghiệp vụ ở Việt Nam)IronPython Silverlight Sharpdevelop Template: This IronPython Silverlight SharpDevelop Template makes it easier for you to make Silverlight applications in IronPython with Sharpdevelop.kingbox: my test code for study vs 2005link_attraente: Projeto Conclusão de CursoORMSharp.Net: ORMSharp.Net https://code.google.com/p/ormsharp/ http://www.sqlite.org/ http://sqlite.phxsoftware.com/ http://sourceforge.net/projects/sqlite-dotnet2/Orz framework: Orz framework is more like a helpful library, if you are develop with DotNet framework 3.0, it will be very useful to you. Orz framework encapsul...OTManager: OTManagerSharePoint URL Ping Tool: The Url Ping Tool is a farm feature in SharePoint that provide additional performance and tracing information that can be used to troubleshoot issu...SunShine: SunShine ProjectToolSuite.ValidationExpression: assembly with regular expression for the RegularExpressionValidator controlTwitual Studio: A Visual Studio 2010 based Twitter client. Now you have one less reason for pressing Alt+Tab. Plus you still look like you're working!Velocity Hosting Tool: A program designed to aid a HT Velocity host in hosting and recording tournaments.Watermarker: Adds watermark on pictures to prevent copy. Icon taken from PICOL. Can work with packs of images.Zack's Fiasco - ASP.NET Script Includer: Script includer to * include scripts (JS or CSS) once and only once. * include the correct format by differentiating between release and build. Th...New ReleasesAll-In-One Code Framework: All-In-One Code Framework 2010-02-28: Improved and Newly Added Examples:For an up-to-date list, please refer to All-In-One Code Framework Sample Catalog. Samples for ASP.NET Name ...All-In-One Code Framework (简体中文): All-In-One Code Framework 2010-02-28: Improved and Newly Added Examples:For an up-to-date list, please refer to All-In-One Code Framework Sample Catalog. Latest Download Link: http://c...AWS SimpleDB Browser: SimpleDbBrowser.zip Initial Release: The initial release of the SimpleDbBrowser. Unzip the file in the archive and place them all in a folder, then run the .exe. No installer is used...BattLineSvc: V1: First release of BattLineSvcCC.Votd Screen Saver: CC.Votd 1.0.10.301: More bug fixes and minor enhancements. Note: Only download the (Screen Saver) version if you plan to manually install. For most users the (Install...Dynamic Configuration: DynamicConfiguration Release 1: Dynamic Configuration DLL release.eIDPT - Cartão de Cidadão .NET Wrapper: EIDPT VB6 Demo Program: Cartão de Cidadão Middleware Application installation (v1.21 or 1.22) is required for proper use of the eID Lib.eIDPT - Cartão de Cidadão .NET Wrapper: eIDPT VB6 Demo Program Source: Cartão de Cidadão Middleware Application installation (v1.21 or 1.22) is required for proper use of the eID Lib.ESPEHA: Espeha 10: 1. Help available on F1 and via context menu '?' 2. Width of categiries view is preserved througb app starts 3. Drag'nd'drop for tasks view allows ...Extended Character Keyboard: OnscreenSCK Beta V1.0: OnscreenSCK Beta Version 1.0Extended Character Keyboard: OnscreenSCK Beta V1.0 Source: OnscreenSCK Beta Version 1.0 Source CodeFileHasher: Console Version v 0.5: This release provides a very basic and minimal command-line utility for generating and validating file hashes. The supported command-line paramete...Furcadia Framework for Third Party Programs: 0.2.3 Epic Wrench: Warning: Untested on Linux.FurcadiaLib\Net\NetProxy.cs: Fixed a bug I made before update. FurcadiaFramework_Example\Demo\IDemo.cs: Ignore me. F...Graffiti CMS Events Plugin: Version 1.0: Initial Release of Events PluginHeadCounter: HeadCounter 1.2.3 'Razorgore': Added "Raider Post" feature for posting details of a particular raider. Added Default Period option to allow selection of Short, Long or Lifetime...Home Access Plus+: v3.0.0.0: Version 3.0.0.0 Release Change Log: Reconfiguration of the web.config Ability to add additional links to homepage via web.config Ability to add...Home Access Plus+: v3.0.1.0: Version 3.0.1.0 Release Change Log: Fixed problem with moving File Changes: ~/bin/chs extranet.dll ~/bin/chs extranet.pdbHome Access Plus+: v3.0.2.0: Version 3.0.2.0 Release Change Log: Fixed problem with stylesheet File Changes: ~/chs.masterHRM Core (QL Nhan Su): HRMCore_src: Source of HRMCoreIRC4N00bz: IRC4N00bz v1.0.0.2: There wasn't much updated this weekend. I updated 2 'raw' events. One is all raw messages and the other is events that arn't caught in the dll. ...IronPython Silverlight Sharpdevelop Template: Version 1 Template: Just unzip it into the Sharpdevelop python templates folder For example: C:\Program Files\SharpDevelop\3.0\AddIns\AddIns\BackendBindings\PythonBi...MDownloader: MDownloader-0.15.4.56156: Fixed handling exceptions; previous handling could lead to freezing items state; Fixed validating uploading.com links;OTManager: Activity Log: 2010.02.28 >> Thread Reopened 2010.02.28 >> Re-organized WBD Features/WMBD Features 2010.02.28 >> Project status is active againPicasa Downloader: PicasaDownloader (41175): NOTE: The previous release was accidently the same as the one before that (forgot to rebuild the installer). Changelog: Fixed workitem 10296 (Sav...PicNet Html Table Filter: Version 2.0: Testing w/ JQuery 1.3.2Program Scheduler: Program Scheduler 1.1.4: Release Note: *Bug fix : If the log window is docked and user moves the log window , main window will move too. *Added menu to log window to clear...QueryToGrid Module for DotNetNuke®: QueryToGrid Module version 01.00.00: This is the initial release of this module. Remember... This is just a proof of concept to add AJAX functionality to your DotNetNuke modules.Rainweaver Framework: February 2010 Release: Code drop including an Alpha release of the Entity System. See more information in the Documentation page.RapidWebDev - .NET Enterprise Software Development Infrastructure: ProductManagement Quick Sample 0.1: This is a sample product management application to demonstrate how to develop enterprise software in RapidWebDev. The glossary of the system are ro...Team Foundation Server Revision Labeller for CruiseControl.NET: TFS Labeller for CruiseControl.NET - TFS 2008: ReleaseFirst release of the Team Foundation Server Labeller for CruiseControl.NET. This specific version is bound to TFS 2008 DLLs.ToolSuite.ValidationExpression: 01.00.01.000: first release of the time validation class; the assembly file is ready to use, the documentation ist not complete;VCC: Latest build, v2.1.30228.0: Automatic drop of latest buildWatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.7.00: Whats New FileBrowser: Non Admin Users will only see a User Sub folder (..\Portals\0\userfiles\UserName) CKFinder: Non Admin Users will only see ...Watermarker: Watermarker: first public version. can build watermark only in left top corner on one image at once.While You Were Away - WPF Screensaver: Initial Release: This is the code released when the article went live.Most Popular ProjectsMetaSharpRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Microsoft SQL Server Community & SamplesASP.NETDotNetNuke® Community EditionMost Active ProjectsRawrBlogEngine.NETMapWindow GISCommon Context Adapterspatterns & practices – Enterprise LibrarySharpMap - Geospatial Application Framework for the CLRSLARToolkit - Silverlight Augmented Reality ToolkitDiffPlex - a .NET Diff GeneratorRapid Entity Framework. (ORM). CTP 2jQuery Library for SharePoint Web Services

    Read the article

  • New HandleProcessCorruptedStateExceptions attribute in .Net 4

    - by Yaakov Davis
    I'm trying to crash my WPF application, and capture the exception using the above new .Net 4 attribute. I managed to manually crash my application by calling Environment.FailFast("crash");. (Also managed to crash it using Hans's code from here: http://stackoverflow.com/questions/2950130/how-to-simulate-a-corrupt-state-exception-in-net-4). The app calls the above crashing code when pressing on a button. Here are my exception handlers: protected override void OnStartup(StartupEventArgs e) { base.OnStartup(e); AppDomain.CurrentDomain.FirstChanceException += CurrentDomain_FirstChanceException; AppDomain.CurrentDomain.UnhandledException += CurrentDomain_UnhandledException; DispatcherUnhandledException += app_DispatcherUnhandledException; } [HandleProcessCorruptedStateExceptions] void CurrentDomain_UnhandledException(object sender, UnhandledExceptionEventArgs e) { //log.. } [HandleProcessCorruptedStateExceptions] void CurrentDomain_FirstChanceException(object sender, System.Runtime.ExceptionServices.FirstChanceExceptionEventArgs e) { //log.. } [HandleProcessCorruptedStateExceptions] void app_DispatcherUnhandledException(object sender, System.Windows.Threading.DispatcherUnhandledExceptionEventArgs e) { //log.. } The //log... comment shown above is just for illustration; there's real logging code there. When running in VS, an exception is thrown, but it doesn't 'bubble' up to those exception handler blocks. When running as standalone (w/o debugger attached), I don't get any log, despite what I expect. Does anyone has an idea why is it so, and how to make the handling code to be executed? Many thanks, Yaakov

    Read the article

  • Grails - Simple hasMany Problem - Using CheckBoxes rather than HTML Select in create.gsp

    - by gav
    My problem is this: I want to create a grails domain instance, defining the 'Many' instances of another domain that it has. I have the actual source in a Google Code Project but the following should illustrate the problem. class Person { String name static hasMany[skills:Skill] static constraints = { id (visible:false) skills (nullable:false, blank:false) } } class Skill { String name String description static constraints = { id (visible:false) name (nullable:false, blank:false) description (nullable:false, blank:false) } } If you use this model and def scaffold for the two Controllers then you end up with a form like this that doesn't work; My own attempt to get this to work enumerates the Skills as checkboxes and looks like this; But when I save the Volunteer the skills are null! This is the code for my save method; def save = { log.info "Saving: " + params.toString() def skills = params.skills log.info "Skills: " + skills def volunteerInstance = new Volunteer(params) log.info volunteerInstance if (volunteerInstance.save(flush: true)) { flash.message = "${message(code: 'default.created.message', args: [message(code: 'volunteer.label', default: 'Volunteer'), volunteerInstance.id])}" redirect(action: "show", id: volunteerInstance.id) log.info volunteerInstance } else { render(view: "create", model: [volunteerInstance: volunteerInstance]) } } This is my log output (I have custom toString() methods); 2010-05-10 21:06:41,494 [http-8080-3] INFO bumbumtrain.VolunteerController - Saving: ["skills":["1", "2"], "name":"Ian", "_skills":["", ""], "create":"Create", "action":"save", "controller":"volunteer"] 2010-05-10 21:06:41,495 [http-8080-3] INFO bumbumtrain.VolunteerController - Skills: [1, 2] 2010-05-10 21:06:41,508 [http-8080-3] INFO bumbumtrain.VolunteerController - Volunteer[ id: null | Name: Ian | Skills [Skill[ id: 1 | Name: Carpenter ] , Skill[ id: 2 | Name: Sound Engineer ] ]] Note that in the final log line the right Skills have been picked up and are part of the object instance. When the volunteer is saved the 'Skills' are ignored and not commited to the database despite the in memory version created clearly does have the items. Is it not possible to pass the Skills at construction time? There must be a way round this? I need a single form to allow a person to register but I want to normalise the data so that I can add more skills at a later time. If you think this should 'just work' then a link to a working example would be great. If I use the HTML Select then it works fine! Such as the following to make the Create page; <tr class="prop"> <td valign="top" class="name"> <label for="skills"><g:message code="volunteer.skills.label" default="Skills" /></label> </td> <td valign="top" class="value ${hasErrors(bean: volunteerInstance, field: 'skills', 'errors')}"> <g:select name="skills" from="${uk.co.bumbumtrain.Skill.list()}" multiple="yes" optionKey="id" size="5" value="${volunteerInstance?.skills}" /> </td> </tr> But I need it to work with checkboxes like this; <tr class="prop"> <td valign="top" class="name"> <label for="skills"><g:message code="volunteer.skills.label" default="Skills" /></label> </td> <td valign="top" class="value ${hasErrors(bean: volunteerInstance, field: 'skills', 'errors')}"> <g:each in="${skillInstanceList}" status="i" var="skillInstance"> <label for="${skillInstance?.name}"><g:message code="${skillInstance?.name}.label" default="${skillInstance?.name}" /></label> <g:checkBox name="skills" value="${skillInstance?.id.toString()}"/> </g:each> </td> </tr> The log output is exactly the same! With both style of form the Volunteer instance is created with the Skills correctly referenced in the 'Skills' variable. When saving, the latter fails with a null reference exception as shown at the top of this question. Hope this makes sense, thanks in advance! Gav

    Read the article

  • Populating a combobox on selectedindex change of another combobox

    - by Riju K K
    Hi, I have created a custom dialog UI, which contains two combobox with SQL server instance & on selection of one of SQLServer instance, another combobox has to be filled with name of Databases on that server instance. I am able to find filling combo with SQL server Instances I had written a similar CustomAction to fill the combobox with database names [CustomAction] public static ActionResult FillDatabases(Session xiSession) { xiSession.Log("Begin CustomAction"); xiSession.Log("Opening view"); View lView = xiSession.Database.OpenView("DELETE FROM ComboBox WHERE ComboBox.Property='DBNAME'"); lView.Execute(); lView = xiSession.Database.OpenView("SELECT * FROM ComboBox"); lView.Execute(); int Index = 1; //bool flag = false; try { Microsoft.SqlServer.Management.Smo.Server svr = new Microsoft.SqlServer.Management.Smo.Server(xiSession["DBSRVR"]); foreach (Microsoft.SqlServer.Management.Smo.Database db in svr.Databases ) { String dbName = db.Name; Record lRecord = xiSession.Database.CreateRecord(3); xiSession.Log("Setting record details"); lRecord.SetString(1, "DBNAME"); lRecord.SetInteger(2, Index); lRecord.SetString(3, db.Name); xiSession.Log("Adding record"); lView.Modify(ViewModifyMode.InsertTemporary, lRecord); ++Index; } } catch (Exception ex) { //logException(xiSession, ex); xiSession.Log(ex.Message ); } lView.Close(); xiSession.Log("Closing view"); lView.Close(); return ActionResult.Success; } I want to call these custom actions somewhat like shown below, <Binary Id="CustomActions.CA.dll" SourceFile="CustomActions.CA.dll" /> <CustomAction Id="FillServerInstances" BinaryKey="CustomActions.CA.dll" DllEntry="FillServerInstances" Execute="immediate" Return="check" /> <CustomAction Id="FillDatabases" BinaryKey="CustomActions.CA.dll" DllEntry="FillDatabases" Execute="immediate" Return="check" /> <InstallUISequence> <Custom Action="FillServerInstances" After="CostFinalize" /> <Custom Action="FillDatabases" After="FillServerInstances" /> </InstallUISequence> I need to show this Sqlserver selection custom dialog from another custom UI, in case user clicked on a pushbutton. Am I doing the right thing in the WiX code? Is there a better way in which combobox custom action fire only when user click on a pushbutton? "FillDatabases" custom action have to be fire whenever user select a new SQLServer instance. How do i do that? Thanks

    Read the article

  • Bash/shell script - shell output redirection inside a function

    - by Josh
    function grabSourceFile { cd /tmp/lmpsource wget $1 > $LOG baseName=$(basename $1) tar -xvf $baseName > $LOG cd $baseName } When I call this function The captured output is not going to the log file. The output redirection works fine until I call the function. The $LOG variable is set at the top of the file. I tried echoing statements and they would not print. I am guessing the function captures the output itself? If so how do push the output to the file instead of the console. (The wget above prints to console, while an echo inside the function does nothing.)

    Read the article

  • Jboss logging issue

    - by balaji
    Our application is deployed on JBoss As 4.0x and we face some issues with JBoss logging. Whenever the server is restarted, JBoss stops logging, and there is no update in server.log. After that it is not updating the log file. Then we do touch cmd on log4j.xml, so that it creates the log files again. Please help me in fixing the issue we cant do touch everytime. We face this issue in both the nodes. I could not figure where the problem is? If any other issues, we can check the log files. If log itself is not getting updated/logged, how can we move further in analyzing the issues without the recent/updated logs? Contents of log4j.xml, copied from the comments below: <appender name="FILE" class="org.jboss.logging.appender.DailyRollingFileAppender"> <errorHandler class="org.jboss.logging.util.OnlyOnceErrorHandler"/> <param name="File" value="${jboss.server.log.dir}/server.log"/> <param name="Append" value="false"/> <param name="DatePattern" value="'.'yyyy-MM-dd"/> <layout class="org.apache.log4j.PatternLayout"> <param name="ConversionPattern" value="%d %-5p [%c] %m%n"/> </layout> </appender> <appender name="CONSOLE" class="org.apache.log4j.ConsoleAppender"> <errorHandler class="org.jboss.logging.util.OnlyOnceErrorHandler"/> <param name="Target" value="System.out"/> <param name="Threshold" value="INFO"/> <layout class="org.apache.log4j.PatternLayout"> <!-- The default pattern: Date Priority [Category] Message\n --> <param name="ConversionPattern" value="%d{ABSOLUTE} %-5p [%c{1}] %m%n"/> </layout> </appender> <root> <appender-ref ref="CONSOLE"/> <appender-ref ref="FILE"/> </root> <category name="org.apache"> <priority value="INFO"/> </category> <category name="org.apache.axis"> <priority value="INFO"/> </category> <category name="org.jgroups"> <priority value="WARN"/> </category> <category name="jacorb"> <priority value="WARN"/> </category> <category name="org.jboss.management"> <priority value="INFO"/> </category>

    Read the article

  • Interfacing Android Nexus One with Arduino + BlueSmirf

    - by efgomez
    I'm a bit new to all of this, so bear with me - I'd really appreciate your help. I am trying to link the Android Nexus One with an arduino (Duemilanove) that is connected to a BlueSmirf. I have a program that is simply outputting the string "Hello Bluetooth" to whatever device the BlueSmirf is connected to. Here is the Arduino program: void setup(){ Serial.begin(115200); int i; } void loop(){Serial.print("Hello Bluetooth!"); delay(1000); } One my computer BT terminal I can see the message and connect no problem. The trouble is with my android code. I can connect to the device with android, but when I look at the log it is not displaying "Hello Bluetooth". Here is the debug log: 04-09 16:27:49.022: ERROR/BTArduino(17288): FireFly-2583 connected 04-09 16:27:49.022: ERROR/BTArduino(17288): STARTING TO CONNECT THE SOCKET 04-09 16:27:55.705: ERROR/BTArduino(17288): Received: 16 04-09 16:27:56.702: ERROR/BTArduino(17288): Received: 1 04-09 16:27:56.712: ERROR/BTArduino(17288): Received: 15 04-09 16:27:57.702: ERROR/BTArduino(17288): Received: 1 04-09 16:27:57.702: ERROR/BTArduino(17288): Received: 15 04-09 16:27:58.704: ERROR/BTArduino(17288): Received: 1 04-09 16:27:58.704: ERROR/BTArduino(17288): Received: 15 ect... Here is the code, I'm trying to put only the relative code but if you need more please let me know: private class ConnectThread extends Thread { private final BluetoothSocket mySocket; private final BluetoothDevice myDevice; public ConnectThread(BluetoothDevice device) { myDevice = device; BluetoothSocket tmp = null; try { tmp = device.createRfcommSocketToServiceRecord(MY_UUID); } catch (IOException e) { Log.e(TAG, "CONNECTION IN THREAD DIDNT WORK"); } mySocket = tmp; } public void run() { Log.e(TAG, "STARTING TO CONNECT THE SOCKET"); InputStream inStream = null; boolean run = false; //...More Connection code here... The more relative code is here: byte[] buffer = new byte[1024]; int bytes; // handle Connection try { inStream = mySocket.getInputStream(); while (run) { try { bytes = inStream.read(buffer); Log.e(TAG, "Received: " + bytes); } catch (IOException e3) { Log.e(TAG, "disconnected"); } } I am reading bytes = inStream.read(buffer). I know bytes is an integer, so I tried sending integers over bluetooth because "bytes" was an integer but it still didn't make sense. It almost appears that is sending incorrect baud rate. Could this be true? Any help would be appreciated. Thank you very much.

    Read the article

  • BIRT logging in the onFetch step of a dataset

    - by Mark Underwood
    Hi all, Im having trouble with some javascript in the onFetch step of a dataset in a BIRT report. I've added logging in the initialise step of the report in a few different ways. The runtime im using is Tivoli Common Reporting, and they supply a logging framework. Its initialised as so reportContext.setPersistentGlobalVariable("logfileName", "DateRangeParm.log"); setupLogging(); logInitialize(); debugLogger("Started logging in initialize step"); debugLogger("Date: " + new Date()); This works fine to log on the steps of the report(ie initialise, BeforeRender, AfterRender etc.) but I cant seem to log anything in the Dataset steps such as onFetch etc. Ive also tried importPackage(Packages.java.util.logging); var fileHandler = new FileHandler("/tmp/birt.log", true); var rootLogger = Logger.getLogger(""); rootLogger.addHandler(fileHandler); as the BIRT instructions tell me to do in the BIRTFAQ Once again this allowed me to log things in the main report (ie BeforeRender etc) but not in the dataset onFetch Step. Ive also tried putting the previous javascript into the onFetch and that didnt seem to work either. Its a bit of a mystery. Im running Ubuntu 9.04. IBM java 1.5. Eclipse 3.5.0 and BIRT 2.5.1. Any help would be great.

    Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >