Search Results

Search found 6172 results on 247 pages for 'usb headset'.

Page 116/247 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• How do I get an HP 1018 laser printer to work on 12.04?

  - by MInner

  edit : already printed on windows-machine Ubuntu 12.04, LJ 1018. I've tried making foo2zjs from sourse. I've downloaded firmware and placed it where necessarily manually from here I've also tried this - same as manual dowload but with some patches like stoping cups, etc.. I've fixed usbfs: process 11200 (usb) did not claim interface 0 before use problems using sudo rmmod usblp as described here. And now I have Aug 10 11:51:59 pav /usr/sbin/hplj1018: foo2zjs: usb://HP/LaserJet%201018?serial=KP07RLV... download failed. Aug 10 11:51:59 pav /usr/sbin/hplj1018: foo2zjs: loading HP LaserJet 1018 firmware /lib/firmware/hp/sihp1018.dl to CUPS USB device ... error. Before that prinet was stucking on "Sending data to printer". Now it's code is "Not connected". Unless ben@pav:~$ lsusb ... Bus 001 Device 015: ID 03f0:4117 Hewlett-Packard LaserJet 1018 Thank you.

  Read the article

• Traktor Audio 2 DJ soundcard configuration

  - by Jaroslav

  I have a Traktor Audio 2 DJ USB sound card (the first version of what it's now called simply Traktor Audio 2) The problem in settings it only sees one output, when there should be two (I need that for Mixxx etc.) Also I want to be able set the sample rate to one of these: 44.1, 48, 88.2, 96 kHz or at least check which one is set. Additionally if possible setting the latency would be an advantage. Some info: $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: TraktorAudio2 [Traktor Audio 2], device 0: Traktor Audio 2 [Traktor Audio 2] Subdevices: 1/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 $ cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA ATI HDMI HDA ATI HDMI at 0xfdcfc000 irq 45 1 [TraktorAudio2 ]: snd-usb-caiaq - Traktor Audio 2 Native Instruments Traktor Audio 2 (usb-0000:00:1d.7-8)

  Read the article

• Ubuntu cant load sound cart

  - by Reza Marefaty

  I have installed Ubuntu 12 and i cant see any volume controller on it and so no audio player can detect any sound card and nothing shown in system setting - sound - output tab. but i can see my hard ware by typing this command : aplay -l Return : List of PLAYBACK Hardware Devices ** card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: U0x4d90x20 [USB Device 0x4d9:0x20], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 How can i activate sound ? Edit : This info may helep for the solution : sudo lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 04:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]

  Read the article

• Upgrade failed, now impossible to restart

  - by Jean Claude Dispaux

  I have an Aspire One with Ubuntu, that I use only when traveling, i.e. seldom. Yesterday I tried to start it, it informed me that I had to install a new release of Ubuntu. The download went fine, then I left it for the night. In the morning I found error messages. I tried to restart, but nothing works any longer. The only backup I have is two USB keys made by the person who installed Ubuntu, that say Recovery Ubuntu 8 and Ubuntu 9.10 respectively. Right now I plugged the "8", selected F12 and instructed to boot from the USB key. It has been running for an hour, the screen still says ubuntu, the USB key flashes red. By the way, I have no precious data on this machine, I do not care about losing data. Please advise on what to do now. Thanks.

  Read the article

• Unable to connect to wireless network

  - by Mike

  A real newbie here. Just downloaded Ubuntu 12.10, put on USB stick and have booted it on my other PC after modifying the boot sequence to boot from USB before hard drive where Windows XP lives. Have no problems with Windows and my wireless but not with Ubuntu. The PC is a Dell Latitude D630 laptop. According to Windows XP , the wireless card is a Dell Wireless 1490 Dual Band WLAN Mini-Card, my IP address is 192.168.0.193, subnet mask is 255.255.255.0, assigned by DHCP, SSID is HOME , type 802.11 and default gateway is 192.168.0.1. Ok, back to booting from USB and TRY option, I am Editing Network connections, I have created/configured "Wireless connection 1" with SSID of HOME and the only other thing I have changed is on the "Editing IPV4 routes for Wireless connection 1 I have enterred 192.168.0.193 , netmask 255.255.255.0 and gateway 192.168.0.1 Anyways , no go. Could use some help. Thanks, Mike from Montreal

  Read the article

• Logitech M515 does not work after upgrade to 12.04

  - by user877329

  After upgrading to 12.04, my Logitech M515 does not work here is some output from the terminal: lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0411:002a BUFFALO INC. (formerly MelCo., Inc.) Bus 001 Device 004: ID 055d:3021 Samsung Electro-Mechanics Co. Bus 002 Device 002: ID 413c:2005 Dell Computer Corp. RT7D50 Keyboard Bus 004 Device 002: ID 0582:0074 Roland Corp. EDIROL UA-25 Bus 005 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver dmesg | grep Logitech [ 30.470528] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-2/input2 The cursor does not move. Also the mouse was working in 11.10 and is working in Windows NT 5.1.2600.

  Read the article

• Ubuntu Suspend won't wake by mouse

  - by corsen

  I just installed Ubuntu 11.04 and realized that suspend would not wake by either keyboard or mouse. After following instructions from here: http://ubuntuforums.org/showthread.php?t=1642817 The system will now wake by keyboard. I have a USB mouse it is a logitech G5. Even if I enable all of the USB devices listed in /proc/acpi/wakeup, my computer will still not wake up via mouse. I'd really prefer to wake by mouse instead of keyboard due to cats. Does anyone know why my mouse won't wake the machine even after enabling all USB devices listed? Thanks, Bryan

  Read the article

• not able to boot through pendrive and run set up

  - by Ash

  I have dell inspiron, previously i have install ubuntu 11.10 on my win7 and make it dual boot. but since i want to upgrade my ubuntu version and change the partion spacing, i have delete 11.10 partion directly and extend my hardrive space(windows + ubuntu) at that moment everything is fine. then i have put 12.04 version pendrive in usb boot from usb and install the 12.04 32 bit . it was installed but can't showing dual boot option like 11.10 and my machine directly boot into win7 . so instantly i again delete my 12.04 partion . Now i am able to login into win7 but whenever i put pendrive(12.04) into usb drive i am facing error of "grub rescue" even though i try to put lower version(11.04) it showing another error "Error: No default or UI configuration directive found boot " i have reinstall win7 and reformat all partion still i am facing same error :( i need help badly.

  Read the article

• problem connecting to wifi at long range

  - by user171849

  I am using a compaq 8510p with internal wifi. The campground supplies an open wifi hotspot, to which I can connect at close range (30 ft) but not at longer range (300 ft). Connecting a usb dongle just confuses things. The dongle tries to lock on to all the wifi networks in my vicinity. They are password protected, but my laptop still tries to connect. I connected a cantenna via usb port and got a signal which said I was connected, but all web pages returned error 'unable to connect to server', despite having three bars showing on the wifi icon. I believe it because the installed wifi card interacts with the usb dongle. If so what can I do about it? I am using Ubuntu 12.04.

  Read the article

• A real noob question

  - by Jaymz

  I have a Hp mini netbook that has been wiped clean, there is nothing other than the bios on it, it has no DVD and I don't have an external DVD. I can change the boot order to boot from a usb device. I have downloaded ubuntu-12.04.1-desktop-i386 I have one of these http://www.kikatek.com/P100600/34609-IOMEGA-250gb-Select-Portable-HDD-2-5-USB?source=froogle currently formatted to NTFS but I can format to exFAT I have tried Linuxlive USB creator, all that managed to do was dual boot the desktop pc that I'm working off, and when booting on the wiped clean netbook, just left me with a black screen with a blinking cursor I have also tried Unetbootin, this managed to change my 'My Computer' icon to Install Ubuntu (C:) and now again, my desktop pc dual boots with the Wubi software, the Unetbootin, wouldn't let me select my external drive to write to Please I'm a complete idiot, i need a super idiots guide to doing this Regards Jaymz

  Read the article

• Ubuntu 13.XX unable to mount USB HDD. Tried everything. I/O error boot sector/file system

  - by XaviGG

  I know that there are many posts related but none of them helped me. I will jump to the last test because it is the one that should work, but it does not. An external HDD with single partition slow NTFS formatted in Windows, empty and clean. Checked for errors, it tells that not errors where found. Moving to Ubutnu 13.04... Gparted throws the first error when trying to read the disk: Input/output error It appears as unknown the content of the disk. Unable to create partition table or format it, getting the same error when trying. If I try to mount it in the terminal it tells me the same, specifying that also there is an I/O error reading the boot sector. I have this problem since I upgraded (always with fresh install) to 13.04. I thought it will be solved by the 13.10 but it has the same behavior. I tried with two different HDD (HD and SSHD) that work perfectly in Windows 7. In 13.04 at least I got a trying of mounting where the icon of the drive started showing and disappearing until finally it disappeared. But now it doesn't even try. Possible causes: -The HDD was my old main HDD, so it had WIN,RECOVERY,SYSTEM,UBU,SWAP partitions. Maybe the way or place where the partition table is defined is not the best for an external HDD but I don't know a lot in that topic. I would appreciate a lot if someone can give me a guideline to convert one of these HDD in a working external HDD. No files to recover, nothing to care about. Just format completely the disk and be able to use it for storing backups without having to move the files first to the windows partition, load windows and then copy them to the external HDD. Because I want to use a file comparator for the backups. Thanks a lot Edit 1: I found an option in Windows to convert it to a dynamic HDD that warns me that I wont be able to run O.S. after changing. I suppose that is what I need because in the current mode I cannot safely extract it. But it tells me an error that it couldn't change the mode.

  Read the article

• The Dreaded Startup Repair Loop on Win 7

  - by HighAltitudeCoder

  For most people, upgrading to Windows 7 has been a relatively painless process.  Not me.  I am in the unlucky 1% or less who had a somewhat less pleasant experience.  First, I cloned my entire onto a larger (and much faster) solid state hard drive, only experiencing minimal problems. Then, I bought the Retail version of Windows 7 Ultimate, took a deep breath and... oh yeah, I almost forgot - BACK UP THE COMPUTER.  The next morning I upgraded to Win 7 and everything seemed fine, until... I rebooted the system, the nice Windows 7 launch graphics come up, it's about to launch and AWWW, are you kidding me?!?!  Back to the BIOS splash screen?  Next comes the sequence of failure - attempt repair - unable to repair - do you want to wipe your hard drive decisions. Because I purchased the retail version, a number is provided where I could call Microsoft Tech support.  When I did, they instructed me to click "Install" from my installation CD, which did not work.  When I tried the "Upgrade" option, it reaches an impasse, telling you that yoiu have a newer version of Win 7, and thus cannot Upgrade.  If you choose "Install" you willl lose everything... files, programs, EVERYTHING.  Or at least this is what it tells you.  I was not willing to take the risk. To make things worse, I had installed a new antivirus software application before I realized my system was unstable (Trend Micro Titanium Internet Security), and this was causing additional problems. One interesting thing, and the only saving grace as it turns out, was that my system WOULD successfully reboot into the OS if I chose to restart it, rather than shut it down.  If I chose to shut down, I would have to go through the loop again until I was given the option to restart. As it turned out, I needed to update my BIOS.  I assumed that since I had updated my BIOS a long time ago to settings that were stable under Windows Vista Ultimate x64, I incorrectly expected Win 7 to adopt the same settings and didn't expect there to be any problems.  WRONG. My BIOS had a setting to halt the boot cycle if various kinds of errors were detected.  Windows Vista didn't care about this, but forget it under Windows 7.  I turned immediately corrected that BIOS setting.  Next, there were the two separate BIOS settings: enable USB mouse and enable USB keyboard.  The only sequence of events that would work were to start my reboot process over from stratch with a hard-wired non-usb keyboard and mouse.  Whent the system booted under these settings, it doesn't detect any errors due to either the mouse or keyboard, and actually booted for the first time in a long while (let me tell ya, that's an amazing experience after fiddling with settings for two entire weekends!) Next step: leave your old mouse and keyboard connected, but also connect your other two devices (mouse, keyboard) that use USB connections.  During the boot cycle, the operating system will not fail due to missing requirements during startup, and it will then pick up the new drivers necessary to use your new hardware. If you think you are in the clear here, you are wrong.  The next VERY IMPORTANT step is to remember to change your settings in the BIOS upon next startup.  Specifically, yoiu will need ot change your BIOS to enable USB mouse and enable USB keyboard input.  If you don't, Windows will detect an incompatibility upon the next startup, and you will be stuck once again in the endless cycle of reboot/Startup Repair/reboot/Startup Repair, without ever reaching a successful boot. Here's the thing - the BIOS and the drivers registered in Win 7 need to match.  If they don't, you're going to lose another weekend worrying and fiddling, all the while wondering if you've permanently damaged your hard drive beyond repair. (Sigh).  In the end, things worked out.  I must note that it is saddening to see how many posts there are out there that recommend just doing a clean install, as if it's the only option.  How many countless poor souls have lost their data, their backups, their pictures and videos, all for nothing other than the fact that the person giving advice just didn't know what to do at that point? My advice to you, try having a look at your BIOS settings first and making sure Win 7 can find your BIOS settings, and also disabling in your BIOS anything that might halt your system boot-up process if it encounters errors.

  Read the article

• Live CD won't start with UEFI

  - by skytreader

  I'm trying to dual boot my Windows 8 machine with Ubuntu 12.04 but I cannot even get to the Live CD under UEFI. I've already set my UEFI boot loader to load from the DVD drive before anything else but it keeps on loading Windows 8 first thing. I've checked that the Ubuntu installer I am using is working by setting the BIOS to legacy boot; under this setting, I can get to the Live CD but it cannot detect Windows 8---something I do not want to happen. Just for the record, my boot order is as follows: ATAPI CDROM: HL-DL-ST DVDRAM GT51N USB CDROM: USB FDD USB HDD HDD: TOSHIBA [SERIAL NUMBER] Network Boot-IPV4: Network Boot-IPV6 Windows Boot Manager Has anyone ran into the same problems as me for UEFI? What am I missing here?

  Read the article

• Mobile broadband not connect without unplug and plug

  - by Muhammad Zohaib

  I have recently installed ubuntu 13.10 and I am still very new in this operating system. My problem is that when I start my computer, it detects all the wifi connections around but not my mobile broadband usb connection (huwaie). I dont get any mobile broadband section automatically. I have to unplug and then plug my broadband usb to connect and have mobile broadband section available. I dont like to unplug and then plug my device always as it will loose my laptop and I always want to be plug in laptop even in shutdown. I always want to auto detect my usb broadband by ubuntu. Please someone guide me. Thanks in advance.

  Read the article

• What is default username & password for a persistent pendrive?

  - by sdos

  I am trying out Ubuntu 11.04 on a netbook. I created a live USB to boot from using this: http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/ and the system boots up into Ubuntu from the USB stick, great! bad news is I am presented with a login form.... I did not set a password so I have no idea what it could be.... username: other password: I have tried no password, no luck... I tried ubuntu, no luck Any Ideas why it has a password, and what it might be or how I can set the password?

  Read the article

• If I enable/disable my wireless device, my computer will panic

  - by Yinyanghu

  Now, I use Debian 6.0.6 instead of Fedora 16/17. But I still sustain the problem of my wireless problem. If I enable/disable my laptop wireless device or my usb wifi adaptor, my laptop will panic. It seems like all the processes stop at that time and I have to restart my laptop directly. P.S. I think I installed the drivers correctly and the linux kernel may have some bugs. For example, when I unplug my usb wifi adaptor or I use this command, ifdown wlan0 I encounter this problem. Wireless Device: PCI: 03:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01) USB: Bus 002 Device 005: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN

  Read the article

• Installed Ubuntu using WUBI due to lack of CD Drive

  - by Chantelle

  I have installed 12.04 via WUBI because my computer does not have a CD Drive. Is there any way that I can delete Windows 7 from my computer and use the whole HD for Ubuntu? I ask this question because for one reason or another I cannot boot from a boot-able USB stick (either in Windows or Ubuntu, however the USB port works because I am able to use my cell phone's tethering plan using all the USB ports to connect to the Internet). Edit: Just found out the problem. Eee PC Model 1018p's do not boot from any format other than FAT and FAT16 and not FAT32.

  Read the article

• How do I access an external drive mounted on a machine on my own network?

  - by avilella

  I've got one desktop computer Ubuntu 11.04 with an external USB drive mounted on it on the home WRT54L Linux network (192.168.0.2), and when I arrive at home with my laptop, I want to be able to mount the external USB drive from my Ubuntu 11.04 laptop (192.168.0.3) to the desktop, without having to unplug it from the desktop, that is accessing it. Is it possible to send a remote mount command to the desktop usb drive from my laptop? Ideally something that creates a local mountpoint I can just call locally from the programs installed in my laptop, like: username@laptop ~ ./myprograminlaptop /my/file/which/is/actually/on/the/desktop/file.txt

  Read the article

• Ubuntu won't boot on windows starter

  - by First timer

  I installed Ubuntu 12.04 LTS yesterday from a usb, but it only boots into Windows unless the usb is in, then it boots into the Ubuntu loader where I can choose Ubuntu vs. Windows. What's the problem? I run windows starter on a netbook with 1 gb ram and intel atom processor. I tried to install boot-repair but it won't work either. I follow the instructions for the Terminal and it seems to go right until I try launching it - then it says that it does not know the command boot-repair. I really like Ubuntu, it lets this netbook run smoothly and better than ever before but I don't think I want to boot from a usb every time.

  Read the article

• How do I get the wireless card on a Lenovo S205 working?

  - by user206829

  I tried to install 12.04, 13.04, and now 13.10 on the machine and followed all the instructions that made sense that I could find and still have not gotten wifi to work. It keeps it hard blocked for some reason, not sure why and not sure anyone out there either has figured it out because I would have found it on Google. When I boot from the formatted USB drive, I have WiFi and everything working, why doesn't work after the USB drive is removed? What driver is the USB/wubi or whatever using so that I can install it and have things working? I could have used wubi and installed Ubuntu like that, but I want to make this machine a fully dedicated Ubuntu machine. The laptop is a Lenovo S205 in case anyone can help. I really would like to use 12.04 or higher, i don't want to downgrade to an older version of Ubuntu if at all possible.

  Read the article

• Programmatically disable WiredHeadset

  - by tyrone-tudehope

  Hi, I have an HTC Hero with a major issue. It thinks that the headset/headphones are plugged in. I sent it to HTC and they said there is water damage so no fix. I have tried toggleheadset, toggleheadset2. I've rooted my device and installed the Android 2.1 ROM. Now I found out that AudioManager.setRouting and .setWiredHeadsetOn(bool) have been deprecated and subsequently removed. I read a post somewhere about how you can create a wrapper for the AudioSystem class as the setRouting is still available there. I as of yet have not been able to figure out how to go about doing this as the AudioSystem class is hidden in the SDK and the code makes use of native functions. Does anybody know of a way to go about creating and implementing a wrapper for AudioSystem or of another way to disable the headset? P.S. I've cleaned out the headset port so there is no dust or anything sending false signals to the mainboard. Any help will be greatly appreciated. Thanks, Tyrone

  Read the article

• How can I change mouse keymapping

  - by zuberuber

  I have Razer DeathAdder(left handed edition) and A4Tech wireless mouse. My problem is I don't know how to change wireless mouse keymapping(swaping left/right click). Can somebody guide me how to do such thing? List of my devices: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Logitech Unifying Device. Wireless PID:4004 id=8 [slave pointer (2)] ? ? Razer Razer DeathAdder id=11 [slave pointer (2)] ? ? A4TECH USB Device id=12 [slave pointer (2)] ? ? A4TECH USB Device id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Logitech USB Keyboard id=9 [slave keyboard (3)] ? Logitech USB Keyboard id=10 [slave keyboard (3)] This is my Razer xinput: Device 'Razer Razer DeathAdder': Device Enabled (121): 1 Coordinate Transformation Matrix (123): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 Device Accel Profile (246): 0 Device Accel Constant Deceleration (247): 5.000000 Device Accel Adaptive Deceleration (248): 1.000000 Device Accel Velocity Scaling (249): 10.000000 Device Product ID (240): 5426, 22 Device Node (241): "/dev/input/event4" Evdev Axis Inversion (250): 0, 0 Evdev Axes Swap (252): 0 Axis Labels (253): "Rel X" (131), "Rel Y" (132), "Rel Vert Wheel" (274) Button Labels (254): "Button Left" (124), "Button Middle" (125), "Button Right" (126), "Button Wheel Up" (127), "Button Wheel Down" (128), "Button Horiz Wheel Left" (129), "Button Horiz Wheel Right" (130), "Button Side" (269), "Button Extra" (270), "Button Forward" (271), "Button Back" (272), "Button Task" (273), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243) Evdev Middle Button Emulation (255): 0 Evdev Middle Button Timeout (256): 50 Evdev Third Button Emulation (257): 0 Evdev Third Button Emulation Timeout (258): 1000 Evdev Third Button Emulation Button (259): 3 Evdev Third Button Emulation Threshold (260): 20 Evdev Wheel Emulation (261): 0 Evdev Wheel Emulation Axes (262): 0, 0, 4, 5 Evdev Wheel Emulation Inertia (263): 10 Evdev Wheel Emulation Timeout (264): 200 Evdev Wheel Emulation Button (265): 4 Evdev Drag Lock Buttons (266): 0 And this is my wireless mouse xinput: Device 'A4TECH USB Device': Device Enabled (121): 1 Coordinate Transformation Matrix (123): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 Device Accel Profile (246): 0 Device Accel Constant Deceleration (247): 1.000000 Device Accel Adaptive Deceleration (248): 1.000000 Device Accel Velocity Scaling (249): 10.000000 Device Product ID (240): 2522, 1359 Device Node (241): "/dev/input/event16" Evdev Axis Inversion (250): 0, 0 Evdev Axes Swap (252): 0 Axis Labels (253): "Rel X" (131), "Rel Y" (132), "Rel Horiz Wheel" (245), "Rel Vert Wheel" (274) Button Labels (254): "Button Left" (124), "Button Middle" (125), "Button Right" (126), "Button Wheel Up" (127), "Button Wheel Down" (128), "Button Horiz Wheel Left" (129), "Button Horiz Wheel Right" (130), "Button Side" (269), "Button Extra" (270), "Button Forward" (271), "Button Back" (272), "Button Task" (273), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243) Evdev Middle Button Emulation (255): 0 Evdev Middle Button Timeout (256): 50 Evdev Third Button Emulation (257): 0 Evdev Third Button Emulation Timeout (258): 1000 Evdev Third Button Emulation Button (259): 3 Evdev Third Button Emulation Threshold (260): 20 Evdev Wheel Emulation (261): 0 Evdev Wheel Emulation Axes (262): 0, 0, 4, 5 Evdev Wheel Emulation Inertia (263): 10 Evdev Wheel Emulation Timeout (264): 200 Evdev Wheel Emulation Button (265): 4 Evdev Drag Lock Buttons (266): 0

  Read the article

• BlueTooth not working on my HP Probook 4720s

  - by mtrento

  the blue tooth on my ubuntu 11.10 does not work. When i try to ad a device it scans indefinitely and never find anything. Wireless is working perfeclty and with windows 7 it is detected. As i read somewhere , the bluetooth is not listed in the usb devices. Is it supported under ubuntu? here are the output of the various debug command i tested : hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: E0:2A:82:7A:8B:04 ACL MTU: 310:10 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:1895 acl:0 sco:0 events:70 errors:0 TX bytes:1986 acl:0 sco:0 commands:64 errors:0 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'PC543host-0' Class: 0x5a0100 Service Classes: Networking, Capturing, Object Transfer, Telephony Device Class: Computer, Uncategorized HCI Version: 2.1 (0x4) Revision: 0x149c LMP Version: 2.1 (0x4) Subversion: 0x149c Manufacturer: Cambridge Silicon Radio (10) hcitool scan hcitool scan Scanning ... lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1ac Chicony Electronics Co., Ltd Bus 002 Device 003: ID 413c:3010 Dell Computer Corp. Optical Wheel Mouse Bus 002 Device 004: ID 148f:1000 Ralink Technology, Corp. lsmod | grep -i bluetooth bluetooth 166112 23 bnep,rfcomm,btusb dmesg | grep -i bluetooth [ 18.543947] Bluetooth: Core ver 2.16 [ 18.544017] Bluetooth: HCI device and connection manager initialized [ 18.544020] Bluetooth: HCI socket layer initialized [ 18.544021] Bluetooth: L2CAP socket layer initialized [ 18.545469] Bluetooth: SCO socket layer initialized [ 18.548890] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 30.204776] Bluetooth: RFCOMM TTY layer initialized [ 30.204782] Bluetooth: RFCOMM socket layer initialized [ 30.204784] Bluetooth: RFCOMM ver 1.11 [ 30.247291] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.247295] Bluetooth: BNEP filters: protocol multicast lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 44:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe 45:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• Impressions of my ASUS eee slate EP121 - Dual core 4GB, 64GB SSD

  - by tonyrogerson

  This thing is lovely, very nice bluetooth keyboard that has nice feedback on the keypress, there is no mouse but you can use the stylus or get yourself a bluetooth mouse, me, I've opted for a Microsoft ARC mouse which is a delight to use, the USB doors are a pain to open for the first time if like me you don't have any finger nails. It came as a suprise that the slate shows four processors, Dual Core with multi-threading, I didn't really look at the processor I was more interested in the amount of memory and the SSD; you don't get the full 4GB even with the 64 bit version of Windows 7 installed (which I immediately upgraded to Ultimate through my MSDN subscription). The box is extremely responsive - extremely, it loads Winword in literally a second. I've got office 2010 and onenote 2010 on there now; one problem is that on applying all (43) windows updates since the upgrade the machine is still sat on step 3 of 3 on the start up configuring updates screen after about an hour, you can't turn this machine off without using a paper clip to reset it and as I have just found you need a paper clip :). Installing Windows 7 SP1 was effortless. One of the first things I did on it was to reduce the size of the font, by default its set at 125%, my eye sight is ok :) so I've set that back down. Amazon Kindle for the PC works really well, plenty of text on the screen when viewed portrait, the case it comes with also allows the slate to stand up in various positions - portrait, horizontal - seems stable enough. The wireless works well, seems to have a better signal than my other two laptop machines which is good news. The gadget passed the pose test at work :). I use offline files to keep a copy of all my work stuff locally, I'm not sure what it is, well, its probably my server but whenever I try and sync it runs for a couple of minutes then fails with network name no longer contactable, funnily enough its fine from my big laptop so I can only guess this may be a driver type issue on the EP121 itself - very odd and very annoying. I do a lot of presenting and need to plug into a VGA project because most sites that's all that is offered, the EP121 has a mini-hdmi output which is great except for this scenario, hdmi is digital, vga is analogue, you will struggle to find a cost effective solution, I found HDFury and also a device HP do, however, a better solution appears to be getting a USB graphics adapter for instance the one I've ordered is the ClimaxDigital USB 2.0 to DVI,VGA or HDMI Adaptor which gives everything I need - VGA and DVI output and great resolution as well - ok, so fingers crossed because I'm presenting next Wednesday in Edinburgh and not taking my 300kg lenovo w700 (I'm sure my back just sighed in relief) - it certainly works really well on my LED TV, the install was simple - it just works! One of the several reasons for buying this piece of kit was to use it on my LED TV to remote into my main machine to check stuff whilst sat in my living room, also to watch webcasts and lecture videos in comfort away from my office, because of the wireless speed and limitation I'm opting for a USB network adapter from Belkin - that will also allow me to take advantage of my home gigabit network, there are only 2 usb ports on the slate so I'm going to knock up a hub so connecting it in is straight forward and simple, I'm also going to purchase a second power supply so I don't have to faff about with that either.I now have the developer x64 edition of SQL Server 2008 R2, yes everything :) - about 16GB left to play with on the machine now but that will be fine, I'll put AdventureWorks on there so I can play and demo stuff which is all I'm after from this, my development machine is significantly more powerful and meets my storage needs too.Travel test this weekend and next week, I'm in Dundee for my final exam for the masters degree.

  Read the article

• How do I use ffmpeg to take pictures with my web camera?

  - by user45583

  I want to use ffmpeg to store images taken by my USB web camera on my Ubuntu 11.10. lsusb outputs: Bus 002 Device 003: ID 0c45:6028 Microdia Typhoon Easycam USB 330K (older) The camera works fine using cheese but I want to use command line tools to make it scriptable but if I try: ffmpeg -i /dev/v4l/by-id/usb-0c45_USB_camera-video-index0 image.jpg The output is: user@box:~$ sudo ffmpeg -i /dev/v4l/by-id/usb-0c45_USB_camera-video-index0 image.jpg [sudo] password for user: ffmpeg version 0.7.3-4:0.7.3-0ubuntu0.11.10.1, Copyright (c) 2000-2011 the Libav developers built on Jan 4 2012 16:21:50 with gcc 4.6.1 configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static WARNING: library configuration mismatch avutil configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay avcodec configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay avformat configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay avdevice configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay avfilter configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay swscale configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay postproc configuration: --extra-version='4:0.7.3-0ubuntu0.11.10.1' --arch=i386 --prefix=/usr --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay libavutil 51. 7. 0 / 51. 7. 0 libavcodec 53. 6. 0 / 53. 6. 0 libavformat 53. 3. 0 / 53. 3. 0 libavdevice 53. 0. 0 / 53. 0. 0 libavfilter 2. 4. 0 / 2. 4. 0 libswscale 2. 0. 0 / 2. 0. 0 libpostproc 52. 0. 0 / 52. 0. 0 /dev/v4l/by-id/usb-0c45_USB_camera-video-index0: Invalid data found when processing input How do I make this work?

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >