Search Results

Search found 9758 results on 391 pages for 'wireless networking'.

Page 116/391 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• Will an Atheros AR928X work with WPA2?

  - by Tommy

  Basically I need only the answer to above question. Please think of that I am new to linux. For further explanation here is the full story: I have the following problem. My friends notebook (Vista) has got a trojan and refuses to work anymore. The Avira Rescue CD did not help either. So I tried an old (9.1) Ubuntu CD and backed up all the essential files. Since we have no Windows Install Disk we want to put Ubuntu on that notebook. But with the 9.1 version there is no WLAN. Systemtest tells me, that it finds an Atheros AR928X, but ifconfig does not show that and the network manager tells me there are no LAN/WLAN devices. So: does that work easier with the new Ubuntu version or is that network adapter a known troublemaker? And: if I get the adapter to work, will it work with the WPA2-network around here?

  Read the article

• No Internet connectivity to linux container on Debian

  - by kirankumar

  I have created a linux container with debian-wheezy template. I am not able to have internet connectivity from the container. Below is my network configuration. Could some one please help me in figuring out the issue ? I can ping to the eth0 ip address in the container from the host. Similarly, i can ping from container to br0 ip address on the host. /etc/network/interfaces on host =============================== # The loopback network interface auto lo iface lo inet loopback # The primary network interface #allow-hotplug eth0 auto eth0 iface eth0 inet dhcp # bridge configuration auto br0 iface br0 inet dhcp bridge_ports eth0 vethCE2 bridge_fd 0 bridge_stp off bridge_maxwait 0 ifconfig -a output on host ========================== ifconfig -a br0 Link encap:Ethernet HWaddr 08:00:27:bd:61:5e inet addr:10.0.0.11 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:febd:615e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:422 errors:0 dropped:0 overruns:0 frame:0 TX packets:266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:174110 (170.0 KiB) TX bytes:31582 (30.8 KiB) eth0 Link encap:Ethernet HWaddr 08:00:27:bd:61:5e UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13017 errors:0 dropped:0 overruns:0 frame:0 TX packets:6210 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7944745 (7.5 MiB) TX bytes:1368421 (1.3 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:835 errors:0 dropped:0 overruns:0 frame:0 TX packets:835 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:91148 (89.0 KiB) TX bytes:91148 (89.0 KiB) vethCE2 Link encap:Ethernet HWaddr fe:3a:43:52:14:49 inet6 addr: fe80::fc3a:43ff:fe52:1449/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:52 errors:0 dropped:0 overruns:0 frame:0 TX packets:205 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2660 (2.5 KiB) TX bytes:31133 (30.4 KiB) brctl show output on host ========================== bridge name bridge id STP enabled interfaces br0 8000.080027bd615e no eth0 vethCE2 /etc/network/interfaces on container ======================================= auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.0.0.99 netmask 255.255.255.0 network 10.0.0.0 ifconfig -a output on container =============================== root@CE2:~# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:11:22:33:44:00 inet addr:10.0.0.99 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:22ff:fe33:4400/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:198 errors:0 dropped:0 overruns:0 frame:0 TX packets:52 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30121 (29.4 KiB) TX bytes:2660 (2.5 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:26 errors:0 dropped:0 overruns:0 frame:0 TX packets:26 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2366 (2.3 KiB) TX bytes:2366 (2.3 KiB) Networking content of /var/lib/lxc/CE2/config ============================================== # networking lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.veth.pair = vethCE2 # It is fine to be commented out #lxc.network.ipv4 = 192.168.10.21/24 # Change this lxc.network.hwaddr = 00:11:22:33:44:00 Let me know if you need any other details. Thanks, Kiran Kumar

  Read the article

• Can't connect to my own wifi network

  - by Nicolas

  I use ubuntu 12.04 on various differents laptops/netbooks on my home. I was able to connect to my own wifi network. But sometimes, I couldn't connect to my wifi network, it ask me for password again and again. After many tries (a lot of them), sometimes I can connect, but sometimes I can't. I have this problem with a Samsung netbook and with a HP laptop. Right now, I can't connect with the HP laptop. I'll be grateful for any help. Best regards, Nicolás

  Read the article

• Change ra0 to wlan0 in ubuntu 10.10

  - by spambas

  I am trying to find a way to change the name of my Ralink interface to the usual wlan0. The application I use is looking for this interface but since we changed our wifi adapter form Intel to ralink we miss the wlan0 because Ralink uses ra0 instead. On all the forums and blogs I read that you need to change that in /etc/sysconfig/network-scripts/ifcfg-ra0. Ubuntu unfortunately does not have a /etc/sysconfig folder.

  Read the article

• Question about wifi connection files/certificates

  - by I_am_that_man-with-hair

  Here is the output i get when i run my school's wifi .py file for secure login. I "python SecureW2_JoinNow.py" I've emailed them about it, but wanted to take a shot and post here, could be on my end. I can't make sense of this error, although the last line makes me think it's on my end. Fresh install, so maybe that is it... Traceback (most recent call last): File "SecureW2_JoinNow.py", line 252, in <module> main() File "SecureW2_JoinNow.py", line 248, in main nm.connect() File "SecureW2_JoinNow.py", line 196, in connect wireless_device = nm_iface.GetDeviceByIpIface('wlan0') File "/usr/lib/python2.7/dist-packages/dbus/proxies.py", line 70, in __call__ return self._proxy_method(*args, **keywords) File "/usr/lib/python2.7/dist-packages/dbus/proxies.py", line 145, in __call__ **keywords) File "/usr/lib/python2.7/dist-packages/dbus/connection.py", line 651, in call_blocking message, timeout) dbus.exceptions.DBusException: org.freedesktop.NetworkManager.UnknownDevice: No device found for the requested iface.

  Read the article

• RTL8188CU USB Network Adaptor on ubuntu 13.04

  - by Daniel B

  I have an RTL8188CU USB Network Adaptor. On Ubuntu 12.10 I had to download RTL8188C_8192C_USB_linux_v3.4.4_4749.20121105 because the built-in rtl8192cu driver did not work on the 64bit system (Tested fine on 32bit). Now I have upgraded to Ubuntu 13.04 and of cause the switch from kernel 3.4 to 3.8 broke the compatibility with the driver source. And (Like I suspected), the 64bit issue with rtl8192cu has still not been resolved. Since Realtek has not yet provided a new driver source, I have no working network on my computer (I use USB Tethering from my mobile at the moment). I tried downloading the Windows driver and set it up with ndiswrapper, but as soon as I activate the ndiswrapper module while having that driver installed, I get a kernel panic. Since I cannot be the only one using this USB Adaptor, I wanted to see if someone else might have found a solution to get something working? Someone might even have a solution as to why the built-in 64bit driver does not work?

  Read the article

• Help identifying device and driver for 0bda:1724

  - by user104547

  I've got a new Lenovo Ideapad Yoga 13. The onboard lan/bluetooth device is identified in Linux as 0bda:1724 (via lsusb). No network peripherals are reported from lspci. From the interwebs, the vendor:product above looks to be RT2573, however, in Windows, the device is identified as RTL8723A. Unfortunately, I have followed both roads, trying rt2500usb, rt2x00usb, and rtl8723e. I have emailed Realtek asking them for help but so far my email has fallen on deaf ears. I've posted the output of lspci -nn -v and lsusb -v to: http://pastebin.com/dqvTSVjF Any help at all would be appreciated. Thank you, Ryan

  Read the article

• PIN request at each login after update to Maverick

  - by Giacomo Verticale

  I have a netbook with included 3G mobile broadband card (Huawei E620). I have configured the broadband network connection in the Network Manager and it works perfectly. However since Maverick upgrade, a window appears just after login I asking for the SIMcard PIN. This happens every time I log in and did not happen with Lucid. Note that the PIN is stored in the configuration of the mobile broadband connection and Lucid was satisfied with that. Is there a way to prevent this request or, at least, to have the system rember the PIN and stop ansking for it? If it may be useful, the broadband network connection is configured as not being available for other users. Also, I would like to keep the SIMcard asking for the PIN; only I do not want to insert it manually at login.

  Read the article

• Replace Broadcom "wl" driver with "b43"

  - by Laszlo Boros

  I'm using Ubuntu 10.04.4 LTS, and in my laptop there is a Broadcom BCM4312 wlan card. lspci output: 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) Subsystem: Broadcom Corporation Device 04b5 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f4500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 81-ac-1d-ff-ff-12-54-92 Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, ssb So as you can see, the current (and default) driver is wl - installed with jockey. But I have another Ubuntu based distribution on my laptop (BackTrack linux), which is also 10.04, but it has the b43 driver installed and the overall performance is MUCH better. So I would like to install it on this OS too, but even google didn't help me. So my question is how to install the latest b43 driver on my Ubuntu?

  Read the article

• Why is my wi-fi STILL not working?

  - by Alex Grantham

  i have 10.10, and have gotten ndiswrapper and the proper driver, it installed properly, but still my wi-fi isn't working. In terminal it say its disabled, but its enabled EVERYWHERE... even when I exited windows. Right now i'm left to use an Ethernet cord and a second computer... please help. My windows isn't in good condition and I would love to switch to Ubuntu... but wi-fi is definitely a need. FYI, I have a toshiba satellite a505d-s6958 with the realtek rtl819[somehting something something]... but I have the driver from their webisite... I really just need to get my wifi to work

  Read the article

• What functionality of an iPad can I use with Ubuntu?

  - by Andrew Ferrier

  What functionality of an iPad can I use with Ubuntu? I'm thinking about buying an iPad, but I only have Ubuntu PCs these days (no Windows, no Mac), and I'm nervous that it may be too reliant on the existence of iTunes. I'm less concerned about getting media onto and off it (and I have read that I can do this with libimobiledevice), but will I be able to activate it with iTunes? Does it need to be USB synced on a regular basis, or can I do most anything I want through the cloud (i.e. over wifi)? Edit: In answer to jrgifford's question, in theory, I'd like to do everything I would want to do with it were I using Windows/Mac. But more specifically, I think I'd want to: "Activate" it, if that's necessary Copy music / video onto it Install apps How much of this can I do without a Windows/Mac PC? Is it necessary to activate it? I don't think I'm that interested in backing it up (what would I back up?), but then again, maybe I'm confused as to how easy it is to get data on and off. Can I get a regular SFTP app for the iPad to copy data to my Ubuntu machine over wi-fi, for example?

  Read the article

• Problem mounting USB Mobile Broadband dongle in Ubuntu 13.04

  - by Still A Learner

  I have been using Ubuntu 13.04 since last two months and I have problem mounting my USB dongle. I have Lenovo G-580 series laptop. It has 3 USB ports which are 3.0. When I attach dongle to one of the three USB ports the device gets mounted immediately but in the other two ports I have to reboot the OS while the dongle is attached to the laptop in order to mount it and connect to the internet. My dongle is of ZTE. I don't get what is going wrong.

  Read the article

• Unable to access internet from devices connected over wifi hotspot with ubuntu 13.04

  - by Jeesmon Jacob

  I am using ubuntu 13.04 and till couple of days back I was able to connect to internet using the hotspot connection I had created previously when I started using ubuntu 10... But two days back I noticed that devices are getting connected to wifi but are not able to access internet.. I deleted my old wifi hotspot and created a new one by going to network settings and there by clicking create a hotspot option.. I logged in from my wife's laptop which is running on windows 7. It was able to establish connection but was not able to access the internet.. Same is happening with my iPhone too I am able to connect to hotspot but for some reason it is not able to access internet... Any help would be highly appreciated.. Thanks Jacob

  Read the article

• How to fix a Broadcom 43224 (rev. 01) in ubuntu 12.10, running on a macbook pro 6,2?

  - by Eduardo Bezerra

  I've googled for 3 days so far, with no success, so I'll be straightforward: How do you get it to work? this is the output for lspci -v: 03:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) Subsystem: Apple Inc. Device 0093 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at c1b00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: bcma-pci-bridge Kernel modules: bcma for uname -a: Linux fury 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I've tried with bcmwl-kernel-source, firmware-b43-installer and now I'm out of ideas. Can someone help me? This is driving me insane! EDIT: for lspci -nn | grep 0280: 03:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) I can see the networks available, but when I try to connect, it gets stuck in a loop: tries to connect, fails, tries again, fails again and so on... EDIT 2: After a long break from this problem, I've just run a few tests again and found out that, although my macbuntu still fails to connect to my home wi-fi network, it works just fine at my university... Does that help in anyway? My home network is managed by a dual-band (2.4Ghz and 5Ghz) 802.11n cisco e4200 wi-fi router.

  Read the article

• Ubuntu 13.04 on Dell Inspiron 1520 (WiFi not working)

  - by Nick J.

  I have a Dell Inspiron 1520 that is rather finicky and had Windows XP installed on it. I recently installed Ubuntu 13.04 "Raring Ringtail", and since, I haven't been able to get the WiFi to work. It has a Dell 1390 wlan mini card for WiFi. Any ideas are appreciated, I have spent hours searching this and many other forums for a solution, and haven't found any that will work. Thanks, New Ubuntu User

  Read the article

• PS3 controller on Sixad disbales Broadcom Bluetooth

  - by Craggles

  The recipe for breaking blue tooth is so far: Fresh install - blue tooth is happy install broadcom drivers for wifi Update to latest ubu install sixad run it once through and check ps3 controller is working. reboot Bluetooth is dead or if I disable blue-tooth before reboot it won't come back either. Latest stable Ubuntu - inbuilt bluetooth module. Hp Probook 6470b. UPDATE Running sixad via: sudo apt-add-repository ppa:falk-t-j/qtsixa sudo apt-get update sudo apt-get install sixad Then: sudo sixpair sixad --start And turning off bluetooth to disconnect the PS3 controller and ctrl c the terminal means bluetooth can't be reactivated. Even after a reboot. Help is appreciated! I'm very new to Ubuntu so be gentle. UPDATE 2 Reinstalling bluez, fixes it...

  Read the article

• How to tell credentials used for a Network Mapping?

  - by shanecourtrille

  I have a networking mapping that doesn't appear to work. When I connect to the mapping I get access denied when I try to create a folder. When I created the mapping I told it to login as another account. I have verified that account has the proper rights on the server side of things. How can I verify that my local machine is connecting with the right credentials?

  Read the article

• Ubuntu 12.10 - WiFi keeps disconnecting (using a Proxy)

  - by semiogeny

  I just installed Ubuntu 12.10 on my Acer Aspire One Netbook and everything works excellent except for the WiFi. When I click on a network I get connected but only for about one minute and then it says 'Disconnected - You are offline' It tries to reconnect and after a while it says 'Connection Established' It's a school network which uses no authentication but a proxy (172.16.4.1:8080) Can anyone help me? I'm new to Ubuntu and don't know a thing. Thanks for your help :)

  Read the article

• What is the most reliable WiFi card?

  - by Kim Prince

  Which WiFi card is most reliable with Ubuntu, in particular V12.04? I have a ASUS PCE-N15 card which is dropping out intermittently. It has the RTL8188CE chipset, and I see that plenty of others have had a problem with this same chipset. I have tried building the custom drivers and a few other fixes, but still not reliable. So, I need to race out another card ASAP, but which card to buy? (I don't just want to select from the Ubuntu components list, since it is not infallible. For example, it says the RTL8188CE chips set works). Thanks!

  Read the article

• Few problems on Dell xps 15 L502 (screen brightness ,blutooth,wi-fi power management problems)

  - by Web-E

  I am running ubuntu 11.10 32bit in my dell xps L502. Working good except few problems. Blue tooth always turned on reboot,I would like to turn it off always. Screen brightness is not saved.Every time I reboot, the screen goes back to full brightness.How to save that? and the most important problem is internet speed through wi-fi is really very slow when operating on battery.the card is intel centrino Advanced-N 1030 with integrated blue tooth. Any help will be appriciated... :)

  Read the article

• How do I enable TUN/TAP forwarding?

  - by rafal

  I have a program which writes packets (destination address 10.3.0.2) to the TUN/TAP interface. Network: host1|tun0----eth1(10.3.0.1)|-------------------host2|eth1(10.3.0.2)| Wireshark captures these packets from interface tun0 but they are not forwarded to interface eth1. Commands: sysctl -w net.ipv4.ip_forward=1 sysctl -p iptables -A INPUT -i tun+ -j ACCEPT iptables -A FORWARD -i tun+ -j ACCEPT iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT /etc/init.d/networking restart /etc/init.d/openvpn restart

  Read the article

• does ubuntu 11.10 is support ns2.29

  - by nasser

  I need your help, I'm a beginner on NS2 , and I'm trying to install ns2.29 on ubuntu 11.10 32bits but i can't. This message appear and installation stopped : Build tcl8.4.11 ============================================================ loading cache ./config.cache checking whether to use symlinks for manpages... no checking whether to compress the manpages... no checking whether to add a package name suffix for the manpages... no checking for gcc... gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether gcc accepts -g... yes checking for building with threads... no (default) checking if the compiler understands -pipe... yes checking how to run the C preprocessor... gcc -pipe -E checking for sin... no checking for main in -lieee... yes checking for main in -linet... no checking for net/errno.h... no checking for connect... yes checking for gethostbyname... yes checking how to build libraries... static checking for ranlib... ranlib checking if 64bit support is requested... no checking if 64bit Sparc VIS support is requested... no checking system version (for dynamic loading)... ./configure: 1: Syntax error: Unterminated quoted string tcl8.3.2 configuration failed! Exiting ... Tcl is not part of the ns project. Please see www.Scriptics.com to see if they have a fix for your platform. Anyone can help me?

  Read the article

• Setting primary internet connection and network on notebook

  - by Francois

  I have installed Ubuntu on a notebook that I have configured to connect to the internet using an Iburst USB modem. This works 100% after a bit of configuring. I now have a desktop pc that I have installed ubuntu on, and would like to connect the two with a router. I bought a router with wifi, and would like to connect my notebook to the other computer using wifi, while still keeping the internet working with the usb modem. The problem is that as soon as the wifi connect, the internet connection dies. Is there a way to force ubuntu to get internet access through the usb modem, but use wifi to connect to the network? I am pretty new to ubuntu so any help would be appreciated. I also have a samsung galaxy tab that I would like to connect to the internet through usb modem via the wifi, so is there also a way to share that internet connection with the other computers on the network? Thanks in advance.....

  Read the article

• ACER ASPIRE ONE, WIFI Atheros Communications Inc. AR9462 problem with 12.10

  - by antoine

  I have an ACER ASPIRE ONE AO756-Series, equipped with A wifi controller Atheros Communications Inc. AR9462 Everything worked fine on 12.04, but when I upgraded to 12.10 I experimented some issues : * wifi does work ! * still, the wifi icon/menu does not react normally : 1) it is always grey, hence not indicating if connected or not, 2) It does not react to me clicking on it (disconnect, change the network, desactive wifi, etc) So it's not a critical issue because I can change the active wifi connection through control pannel, but it is very annoying. Do you know of an solution around this issue ? thanks a lot antoine

  Read the article

• I need acpi=off to boot, but this seems to disable wifi

  - by TheExp3rt

  To boot my computer, I have to use acpi=off in kernel options. Doing this apparently causes my wifi adapter to be switched off and prevents my mouse and USB keyboard to not work. If I change acpi=off to nomodeset, it fixes these problems. But then it sets my computer at a lower resolution. I am currently running Kubuntu 13.10, although none of the updates, starting from 12.04, changed the need for acpi=off. I assume I need acpi=off in because I have an oldish computer with an intel motherboard How can I boot without acpi=off? Output of uname -a: 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC x86_64 x86_64 x86_64 GNU/Linux

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >