Search Results

Search found 4466 results on 179 pages for 'aip cd aish'.

Page 117/179 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• How to force my laptop to use the discrete GPU?

  - by Anton Roth

  My laptop (Asus X7BSV) is stuck using only the integrated GPU. It has a nVidia GT540M as well, but I cannot get it to work. I am using a Windows 7 x64 with latest drivers. This occurred after I attached an external USB monitor I need for work, and since then I cannot swap back to the nVidia GPU (dxdiag for example says that the primary GPU is the Intel integrated one). Asus support asked me to completely reinstall the system, but that is something I do not want to do. I checked the BIOS, there is no option as to what GPU to use. The nVidia card itself is working, since I can use CUDA on it, and it worked with a Ubuntu Live CD. In the nVidia software management I tried setting it to global setting, high performance GPU (nVidia), but that had no impact. What am I missing here? I did uninstall/delete all drivers and software related to the external monitor, but that did not help.

  Read the article

• Windows 7 Bootcamp to see data doubler SATA SSD in Optical Bay Connector

  - by bumble_bee_tuna

  Hi I purchased a OWC data doubler http://eshop.macsales.com/item/OWC/DDAMBS0GB/ ... Long story short it lets you add a second HD to your macbook pro in place of the cd/dvd drive (which is useless anyway, impossible to get stuff out when stuck). My current setup is 600gb intel SSD bootdrive 100gb partition for OSX / 500gb for Windows 7 Prof from Bootcamp (use 99 % of time). My desire is to have a second 300gb SSD to run disk intensive VM's off of. So I added a second 300gb intel SSD (again, NO desire to boot off of) on the sata optical port. I can see the drive no problem if I boot in to OSX, however, can't see it in disk management on Win7 ??? Any ideas similar experience ... Funny thing is I can see it in "Device Manager Disk Drivers" but not Disk Management ??? Also no I don't want to use Fusion/Parallels this is a waste of resources for me.

  Read the article

• DVD ROM not working only in windows?

  - by Behrooz A

  I have an Asus N53SV laptop, My DVD rom doesn't read any type of DVD in windows , but I just installed windows 7 from a bootable DVD , I think this problem occurred after I tried to change my partitioning with paragon partition magic , I was trying to shrink , join and so , after that my windows showed an error that windows cannot find [weird address] on hard disk every time on starts. windows itself says the DVD drive works correctly and driver is working properly, but no DVD or CD can be read , note that the DVD I'm trying to read is the same DVD which I used to install windows some minutes ago. I don't know what's the problem

  Read the article

• mirroring linux server to external usb harddrive

  - by DuPie

  My google-fu must be sucking. i havent been able to find a good solution for the following: numerous Linux server on commodity hardware Trying to do a recovery mirror copy to external harddrives External harddrives are smaller than source harddrives, but larger than data External drives are connected via usb2 (slow) Servers range from 20GB of data to 400GB of data Servers are remote, so hands on access is a pain need to copy boot files. empty external drives currently Basicly, looking for a way to do use a ghosting solution from INSIDE a running linux server to an external harddrive, without booting a cd etc. the rsync/cpio solutions i've looked at dont work great with grub/dev/proc etc. I understand that since the system isnt offline, it wont be a "mirror" image as files change, but thats ok. Are there any free/commercial products that would work?

  Read the article

• How to use public-key ssh authentication

  - by Poma

  I have 2 ubuntu 12.04 (beta) servers (node1 and node2) and want to establish passwordless root access between them. Other users should not have access to other boxes. Also note that ssh default port is changed to 220. Here's what I did: sudo -i cd /root/.ssh ssh-keygen -t rsa # with default name and empty password cat id_rsa.pub > authorized_keys then copied id_rsa & id_rsa.pub to node2 and added id_rsa.pub to authorized_keys. Both hosts have the same /root/.ssh/config file: Host node1 Hostname 1.2.3.4 Port 220 IdentityFile /root/.ssh/id_rsa Host node2 Hostname 5.6.7.8 Port 220 IdentityFile /root/.ssh/id_rsa Now the problem is that when I type ssh node2 it asks me for password. What may be the problem?

  Read the article

• How can I copy the link in Google without openning the link and the "Google stuff" in the URL? [closed]

  - by John Isaiah Carmona

  I want to copy a link in Google without opening that link and without the "Google stuff". When I use my browser by right-clicking the link and selecting Copy Link Location, it copies a very long link because of the Google stuff. http://www.google.com.ph/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&ved=0CBwQFjAA&url=http%3A%2F%2Fdownload.microsoft.com%2Fdownload%2FC%2F0%2FA%2FC0AEF0CC-B969-406D-989A-4CDAFDBB3F3C%2FWin8_UXG_RTM.pdf&ei=1bWHULCyEZGQiQfl_IGIDA&usg=AFQjCNEtK1uai68ZKixTovFm2bwe7C9LGg&sig2=cPFFl4ARTTr7xHTHcr5k8A I just want the download.microsoft.com/.../C/0/A/.../Win8_UXG_RTM.pdf URL, but I can't see it in my browser even after opening the site with Google.

  Read the article

• Cannot install 64-bit version of Visio due to Microsoft Office Single Image 2010

  - by Ryan Kohn

  I tried to install Visio on Windows 7, but I received the below error message. You cannot install the 64-bit version of Office 2010 because you have 32-bit Office products installed. These 32-bit products are not supported with 64-bit installations: Microsoft Office Single Image 2010 If you want to install 64-bit Office 2010, you must uninstall all 32-bit Office products first, and then run setup.exe in the x64 folder. If you want to install 32-bit Office 2010, close this Setup program, and then either go to the x86 folder at the root of your CD or DVD and run setup.exe, or get the 32-bit Office 2010 from the same place you purchased 64-bit Office 2010. I cannot find Microsoft Office Single Image 2010 in the programs list, so I tried to use Microsoft's Fix It to remove the software, but this doesn't resolve my issue.

  Read the article

• Unable to copy multiple files from remote sftp via ssh

  - by Kevin S

  I am trying to copy multiple (1000s) .JPG files from remote SFTP server to current server using mget command but it is not working. Here is the command that I used sftp [email protected] sftp> cd /images sftp> mget *.JPG Screenshot at http://i.stack.imgur.com/bSciQ.png Nothing happens so when I do CTRL + C it gives an error that says File "/images/*.JPG" not found. I have already referred all suggestions posted on the forum but nothing is working. Let me know if there is another way to copy.

  Read the article

• XAMPP MySQL stops running after ~1.5 seconds

  - by Nona Urbiz

  I have tried installing it as a service. Nothing seems to work! I have checked the status page and MySQL is listed as "Deactivated". When trying to open phpMyAdmin I get: Error MySQL said: Documentation #1045 - Access denied for user 'root'@'localhost' (using password: NO) Connection for controluser as defined in your configuration failed. phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server. and from the CD demo: Warning: mysql_connect() [function.mysql-connect]: Access denied for user 'root'@'localhost' (using password: NO) in C:\xampp\htdocs\xampp\cds.php on line 77 Could not connect to database! Is MySQL running or did you change the password?        Thanks for any suggestions or help you can give!

  Read the article

• Using rsync with link-dest from HFS to NTFS

  - by Tom

  Hi, I'm having a problem with rsync. I'm on a Mac and I'd like to sync my everyday's changes from my HFS+ partition to my NTFS formated networked drive. Pretty simple, and everything goes well except that it syncs every file each times. Here's my script: #! /bin/sh snapshot_dir=/Volumes/USB_Storage/Backups snapshot_id=`date +%Y%m%d%H%M` /usr/bin/rsync -a \ --verbose \ --delete --delete-excluded \ --human-readable --progress \ --one-file-system \ --partial \ --modify-window=1 \ --exclude-from=.backup_excludes \ --link-dest ../current \ /Users/tommybergeron/Desktop/Brainpad \ $snapshot_dir/in-progress cd $snapshot_dir rm -rf $snapshot_id mv in-progress $snapshot_id rm -f current ln -s $snapshot_id $snapshot_dir/current Could someone help me out please? I've been searching for like two hours and I still am clueless. Thanks so much.

  Read the article

• Clone a 2TB WD Green internal drive with bad sectors to a 3TB partitioned external

  - by ron

  I have a 2TB WD Black drive and would like to simply do a straight clone from a failing 3TB drive to it. Both are SATA. Will I be able to just install the new drive alongside the faulty one and then do the clone/rescue attempt with ddrescue or is there a better method? The faulty internal drive mentioned has bed sectors although am usually able to boot into Windows 7 Ultimate with it and navigate and access all my programs. I have been attempting some trials with an Ubuntu Live CD using ddrescue but am not sure I'm doing it right. I have a 3TB WD my book essential external which is GPT and have created a separate 2TB partition on it which I am trying to clone to. I assume I need to format the new drive first to NTFS? Can I do that via the Ubuntu Rescue Remix 12-04 live DVD that I've been booting with?

  Read the article

• Windows PE 3.0 detect what device it was booted from

  - by Brian

  I am creating a custom boot disk for work using Windows PE 3.0. I need to be able to tell what drive the system was booted from. it may be a CD, or a USB Flash drive. In the past, I have looked for a file on the root of the drive that holds some of our custom configuration. however that is getting a bit messy. Basically, in addition to Windows PE, the drive or disk also has other scripts and tools. I need to remount that USB drive or DVD to the U:\ Drive, to keep thing consistent. Basically, Diskpart.exe Select Volume $X assign Letter=U Exit I just need to figure out how to determine that nasty little $X.

  Read the article

• Shrink system volume, create new partition, & enlarge current partitions w/o losing data?

  - by studiohack

  My machine has a 300 GB hard drive. I'm planning to reinstall Windows 7 on this machine soon. It has three partitions: a System partition, and two equal data partitions for particular types of data (music, photos, docs, etc). These data partitions are too small for the data they hold, and the system partition is large enough to be shrunk. I want to create four partitions in preparation for the fresh reinstall, a System partition, and three data partitions of varying sizes (40, 50, & 60 GB respectively). My question: Can I shrink the System volume, create another partition, and make the existing two data partitions bigger without losing any data that is currently on the hard drive? Or is it better to format the whole thing, and create partitions after (thus removing the current OS) with a partitioning tool booting from CD? Can I reformat and create partitions with the Windows 7 set up DVD?

  Read the article

• Setting Linux UID on NFS volume from EMC NX4

  - by ethrbunny

  I have an EMC NX4 from which there are several CIFS shares with corresponding NFS mount points. The CIFS user ids seem fine but when viewed from Linux they are all 327xx numbers and can't be set from the file system. (IE CHOWN doesn't work - permission denied). On our other (older) EMC devices we used an MMC app to set the Linux UID for each user. I don't seem to have such an app on the 'Applications and Tools' CD for this new device. Is there some other method for setting these? Did I setup the system incorrectly?

  Read the article

• Bootable and remote controllable imaging software?

  - by stefan.at.wpf

  I am looking for an imaging software, that one can boot from CD or usb stick (therefore without installing anything on the system!) and then control by some kind of remote desktop. So something like a combination of Acronis TrueImage's Bootable Media and Windows Remote Desktop. I don't even need to be able to store the backup on a network drive, as an external usb hdd is attached for these purposes. Background: A system that is normally controlled by SSH / command line and therefore has no keyboard/mouse connected that I could use to control Acronis TrueImage.

  Read the article

• How to enable CDR on AsteriskNow 1.5

  - by Michal Niklas

  I have upgraded PBX to Asterisk 1.6.2.7 and now CDR files are not created. It looks that such logging is disabled: Connected to Asterisk 1.6.2.7 currently running on pbx2 (pid = 5824) Verbosity is at least 3 pbx2*CLI> cdr show status pbx2*CLI> Call Detail Record (CDR) settings ---------------------------------- Logging: Disabled Mode: Simple Asterisk shows that CDR modules are loaded: pbx2*CLI> module show like cd Module Description Use Count cdr_manager.so Asterisk Manager Interface CDR Backend 0 cdr_csv.so Comma Separated Values CDR Backend 0 app_cdr.so Tell Asterisk to not maintain a CDR for 0 app_forkcdr.so Fork The CDR into 2 separate entities 0 func_cdr.so Call Detail Record (CDR) dialplan functi 0 cdr_custom.so Customizable Comma Separated Values CDR 0 6 modules loaded How to enable creating CDR csv files?

  Read the article

• User reduced LVM logical volume without resizing filesystem

  - by Matthew

  I received an email yesterday that one of our users was trying to make room for a heartbeat/clustering package which requires its own partition to act as a voting disk. To do this, he attempted to reduce the size of the root partition's logical volume, and then create a new logical volume for this purpose. However, he forgot to resize the filesystem first (or include the -r switch in the command). He also forgot to unmount the root partition by running this process from a rescue cd. The system is now refusing to boot into the OS with the following error: Either the superblock or the partition table is likely to be corrupt! Unexpected Inconsistency; run fsck manually. The system them drops the user into single user mode. Is it possible to rescue the filesystem, or is it hosed? Its running ext3.

  Read the article

• Error loading operating system WinXP Pro

  - by Jakesan

  So im getting the error "Error loading operating system" when the computer tries to boot to a fresh install of WinXP Pro. To get to this point, I: Shrunk the only partition with Gparted to 33GB Copied the partition to the end of the 200GB drive Enlarged the first one to fill the space Formatted the first partition to NTFS Set the first partition to boot, tagged the latter to hidden, removed boot flag This was done all under Hiren's BootCD. Now this is where it goes down the drain. I installed XP Pro SP1a from its CD, and chose to quick format the partition. Now after the OS was installed, I can't start XP without using the default menu action from Hiren's BootCD. All I am greeted with is the "error loading operating system" message. I tried to use the XP recovery to fixboot, fixmbr and bootcfg /rebuild (dont remember if the command was like this, anyway the 3 suggested commands). This did nothing. What am I missing here?

  Read the article

• How can I create a pen drive that I can boot from, and then install Win98 from?

  - by rossmcm

  I have a HP Compaq t5515 thin client computer with a flash disk and USB port. I want to put Win98 onto it, replacing whatever is on there now (I think it is some Linux-based thing). I can find stuff about putting Win98 onto a pen drive and running from that, but I can't find any info about installing Windows 98 from a pen drive onto a sep[arate system. Is it just a matter of making the pen drive bootable to DOS copying the contents of a Win98 installation CD onto the pen drive booting the HP machine from the pen drive running SETUP.EXE from the pen drive? Any pointers appreciated. TIA

  Read the article

• Add a netbook to an existing Windows XP home network

  - by GorillaSandwich

  I've got a home network set up with a couple of Windows XP computers. I'm now trying to add our new netbook to it - also running XP. (The goal is to share files and a printer.) I have run the Network Setup Wizard and made sure that the workgroup name is the same as the others, and have rebooted several times, but whenever I try to 'view workgroup computers,' the only one on it is the netbook. I have a Windows XP CD, but the netbook has no drive. The wizard has some options for floppy disks, but that's useless to me these days. What is this wizard actually trying to do, and can I do it manually? Surely it can't be this hard.

  Read the article

• Uninstalled Ubuntu, no GRLDR?

  - by user32965

  So I'm a big fat idiot. I installed Ubuntu 11.04 on my school's laptop, and here's come the time that I have to turn it back in. I wrote GRUB to the Master Boot Record, thinking it wasn't going to be permanent. So, fast forward to yesterday. I decided to hell with this, and popped in my Windows 7 CD, deleted the whole partition, formatted to NTFS, and installed Windows 7 on it. I'm surfing the web and my computer overheats [totally typical] I boot up, and get this: Try (hd0,0): FAT32: No GRLDR Try (hd0,1): invalid or null Try (hd0,2): invalid or null Try (hd0,3): invalid or null Try (hd1,0): NTFS5: No grldr Try (hd1,1): invalid or null Try (hd1,2): invalid or null Try (hd1,3): invalid or null Cannot find GRLDR. Press space bar to hold the screen, any other key to boot previous MBR... Timeout: 5 The timeout part just counts down to 0 from 5. I need to turn in this thing before tomorrow, please please please can someone help me out?

  Read the article

• CPU fan turns on and off repeatedly without booting

  - by rnso

  My PC has suddenly stopped starting up. On checking with case open, the CPU fan starts running when the power is turned on, but it stops after about 2-3 seconds, restarts again after about 2-3 seconds and the loop is repeated. There is no beep and nothing appears on the screen. On searching the internet, I found there could be several reasons for this. I tried removing hard-disk, CD drive, tightening connections etc but of no avial. I also tried using a new power supply but the response is the same. Where could be the problem and how can it be solved? Thanks in advance.

  Read the article

• Server 2008 R2 repair install

  - by Kyle

  Is it possible to do a repair install on a server 2008 R2 Enterprise machine like we used to be able to do on 2003? I need to reinstall on a remote server and don't have a driver cd in the drive just a copy of server. I am worried that when it comes back up I won't have any drivers for the NIC. I have a iDRAC but can't seem to send files over the DRAC to the machine. Sadly this server doesn't have an SD card in the DRAC with the files I need. I welcome any suggestions if the repair is not possible. Our IDC is in Chicago and they are buried under snow so I won't be able to get another admin on site until at least tomorrow.

  Read the article

• Pygrub with DRBD on Xen 3.2

  - by Joril

  Hi all, we have a two-node cluster using DRBD 8.2 on CentOS 5.2 64bit. The cluster runs a few VMs on top of Xen 3.2.1, here's the configuration for an Ubuntu Jaunty VM: name = 'dev' bootloader = '/usr/bin/pygrub' memory = '512' vif = [ 'ip=192.168.1.217,mac=00:16:3E:CD:60:80' ] disk = [ 'phy:/dev/drbd24,xvda1,w', 'phy:/dev/drbd25,xvda2,w' ] As you can see, the disks are specified like "phy:", and as such pygrub doesn't know a thing about the underlying drbd device... So my problem is that even though the VM boots just fine, it doesn't handle the state of the drbd device. As a result, when for some reason the device gets to a secondary/secondary state, the VM won't boot, and I have to manually specify which node is primary. I read that starting with Xen 3.3 pygrub understands the "drbd:" specification, and I think that it would fix my problem, but I can't upgrade Xen at the moment... Is there a workaround? For example, could I use the 3.3 version of pygrub? Thanks!

  Read the article

• NFS share access - Permission denied

  - by rgngl

  I'm trying to share a directory on my NAS device(WD Mybook WE) with NFS to another machine on my local network. The directory on the NAS device looks like this: drwxr-x--- 15 git git 4096 Nov 17 01:05 git/ And id's of the user git on the NAS device is like this: [root@myhost DataVolume]# id git uid=505(git) gid=505(git) I played with many different parameters in the /etc/exports file and this is what I got there currently: /DataVolume/git 192.168.0.20(async,rw,no_root_squash,no_subtree_check) On the client side I have the user git and group git with the same id's to match the ones on the server. user@myclient:~$ id git uid=505(git) gid=505(git) groups=505(git) I mount the directory with: sudo mount myhost:/DataVolume/git -t nfs git/ and the mounted directory looks like: drwxr-x--- 15 git git 4096 Nov 17 01:05 git After these steps I can't seem to cd to that directory with any user, including git and root. I am getting a Permission denied error. Thanks in advance for any help.

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >