Search Results

Search found 49089 results on 1964 pages for 'global address list'.

Page 117/1964 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

  • Finding Local IP via Socket Creation / getsockname

    - by BSchlinker
    I need to get the IP address of a system within C++. I followed the logic and advice of another comment on here and created a socket and then utilized getsockname to determine the IP address which the socket is bound to. However, this doesn't appear to work (code below). I'm receiving an invalid IP address (58.etc) when I should be receiving a 128.etc Any ideas? string Routes::systemIP(){ // basic setup int sockfd; char str[INET_ADDRSTRLEN]; sockaddr* sa; socklen_t* sl; struct addrinfo hints, *servinfo, *p; int rv; memset(&hints, 0, sizeof hints); hints.ai_family = AF_UNSPEC; hints.ai_socktype = SOCK_DGRAM; if ((rv = getaddrinfo("4.2.2.1", "80", &hints, &servinfo)) != 0) { fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(rv)); return "1"; } // loop through all the results and make a socket for(p = servinfo; p != NULL; p = p->ai_next) { if ((sockfd = socket(p->ai_family, p->ai_socktype, p->ai_protocol)) == -1) { perror("talker: socket"); continue; } break; } if (p == NULL) { fprintf(stderr, "talker: failed to bind socket\n"); return "2"; } // get information on the local IP from the socket we created getsockname(sockfd, sa, sl); // convert the sockaddr to a sockaddr_in via casting struct sockaddr_in *sa_ipv4 = (struct sockaddr_in *)sa; // get the IP from the sockaddr_in and print it inet_ntop(AF_INET, &(sa_ipv4->sin_addr.s_addr), str, INET_ADDRSTRLEN); printf("%s\n", str); // return the IP return str; }

    Read the article

  • C standard addressing simplification inconsistency

    - by Chris Lutz
    Section §6.5.3.2 "Address and indirection operators" ¶3 says (relevant section only): The unary & operator returns the address of its operand. ... If the operand is the result of a unary * operator, neither that operator nor the & operator is evaluated and the result is as if both were omitted, except that the constraints on the operators still apply and the result is not an lvalue. Similarly, if the operand is the result of a [] operator, neither the & operator nor the unary * that is implied by the [] is evaluated and the result is as if the & operator were removed and the [] operator were changed to a + operator. ... This means that this: int *i = NULL; printf("%p", (void *) (&*i) ); printf("%p", (void *) (&i[10]) ); Should be perfectly legal, printing the null pointer (probably 0) and the null pointer plus 10 (probably 10). The standard seems very clear that both of those cases are required to be optimized. However, it doesn't seem to require the following to be optimized: struct { int a; short b; } *s = 0; printf("%p", (void *) (&s->b) ); This seems awfully inconsistent. I can see no reason that the above code shouldn't print the null pointer plus sizeof(int) (possibly 4). Simplifying a &-> expression is going to be the same conceptually (IMHO) as &[], a simple address-plus-offset. It's even an offset that's going to be determinable at compile time, rather than potentially runtime with the [] operator. Is there anything in the rationale about why this is so seemingly inconsistent?

    Read the article

  • which default.list should i modify for default applications and what are the differences between the 2

    - by damien
    I would like to add miro to the default application GUI in system settings/default applications.I added ;miro.desktopnext to all rhythmbox.desktop entries eventually discovering if it was not added to audio/x-vorbis+ogg=rhythmbox.desktop as audio/x-vorbis+ogg=rhythmbox.desktop;miro.desktop it would not appear in the system settings/default applications drop down list for audio. I can find default.list in either /etc/gnome/defaults.list or /usr/share/applications/defaults.list modifying either gives me the same results.What is the difference and which is the correct list to modify?

    Read the article

  • Remove hardware from "safely remove hardware" list on Windows 7

    - by ricsmania
    Hi, I have a USB wifi card (D-Link DWA-125) on a Windows 7 x64 computer. The problem is that the card appears on the "safely remove hardware" list, but I don't ever want to unplug it, so I would like to remove it from the list. So far I have only found solutions that mess with the registry (and don't really work properly) or that substitute the safely remove hardware with a third-party software. Or worse, hide the icon altogether. Yes, I do need the icon from USB drives and phones. So, is there a "clean" way to remove it from the list? Thanks.

    Read the article

  • Apache: VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not sup

    - by user45761
    Hi, when i add the line below to /etc/apache2/apache2.conf I get the error belower when i restart apache: Include /usr/share/doc/apache2.2-common/examples/apache2/extra/httpd-vhosts.conf [Mon Jun 14 12:16:47 2010] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results [Mon Jun 14 12:16:47 2010] [warn] NameVirtualHost *:80 has no VirtualHosts This is my httpd-vhosts.conf file: # # Use name-based virtual hosting. # NameVirtualHost *:80 # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. <VirtualHost *:80> ServerName tirengarfio.com DocumentRoot /var/www/rs3 <Directory /var/www/rs3> AllowOverride All Options MultiViews Indexes SymLinksIfOwnerMatch Allow from All </Directory> Alias /sf /var/www/rs3/lib/vendor/symfony/data/web/sf <Directory "/var/www/rs3/lib/vendor/symfony/data/web/sf"> AllowOverride All Allow from All </Directory> </VirtualHost> Any idea? Regards Javi

    Read the article

  • Apache: VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not sup

    - by user45761
    Hi, when i add the line below to /etc/apache2/apache2.conf I get the error belower when i restart apache: Include /usr/share/doc/apache2.2-common/examples/apache2/extra/httpd-vhosts.conf [Mon Jun 14 12:16:47 2010] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results [Mon Jun 14 12:16:47 2010] [warn] NameVirtualHost *:80 has no VirtualHosts This is my httpd-vhosts.conf file: # # Use name-based virtual hosting. # NameVirtualHost *:80 # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. <VirtualHost *:80> ServerName tirengarfio.com DocumentRoot /var/www/rs3 <Directory /var/www/rs3> AllowOverride All Options MultiViews Indexes SymLinksIfOwnerMatch Allow from All </Directory> Alias /sf /var/www/rs3/lib/vendor/symfony/data/web/sf <Directory "/var/www/rs3/lib/vendor/symfony/data/web/sf"> AllowOverride All Allow from All </Directory> </VirtualHost> Any idea? Regards Javi

    Read the article

  • Email with extra '.com' behind sender email address

    - by CHT
    Currently I had a situation where I sent an email to [email protected], but when I receive mail from [email protected], it showed as [email protected], with extra '.com' behind the email address, this just happen within this week. Before this, I didn't change any setting, currently I am using Outlook 2010. When I checked the email in webmail, it also showed it as [email protected]. It seem that it has nothing to do with Outlook. However, I also tried on Thunderbird 16.0.1, but still the problem is the same. Has anyone experienced this before? Is the problem caused by the sender or receiver? Header Message as below: Return-Path: [email protected] Received: from colo4.roaringpenguin.com (not-assigned.privatedns.com [174.142.115.36] (may be forged)) by pioneerpos.com (8.12.11/8.12.11) with ESMTP id q9V6OsKU032650 for [email protected]; Wed, 31 Oct 2012 01:24:55 -0500 Received: from mail.pointsoft.com.tw (pointsoft.com.tw [59.124.242.126]) by colo4.roaringpenguin.com (8.14.3/8.14.3/Debian-9.4) with ESMTP id q9V6OmN0026374 for [email protected]; Wed, 31 Oct 2012 02:24:50 -0400 X-MimeOLE: Produced By Microsoft Exchange V6.5 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----_=_NextPart_001_01CDB730.6B3D5A51" Subject: =?big5?B?scTByrPmLblzpfM=?= Date: Wed, 31 Oct 2012 14:25:16 +0800 Message-ID: X-MS-Has-Attach: yes X-MS-TNEF-Correlator: thread-topic: =?big5?B?scTByrPmLblzpfM=?= thread-index: Ac23MH3YpZuLx2ejTYqR5PfoZ+IoBw== X-Priority: 1 Priority: Urgent Importance: high From: "Alice" [email protected] To: "Bob" [email protected] X-Spam-Score: undef - pointsoft.com.tw is whitelisted. X-CanIt-Geo: ip=59.124.242.126; country=TW; region=03; city=Taipei; latitude=25.0392; longitude=121.5250; http://maps.google.com/maps?q=25.0392,121.5250&z=6 X-CanItPRO-Stream: pioneerpos-com:default (inherits from rp-customers:default,base:default) X-Canit-Stats-ID: 02IhGoMJb - 2e7fa924443e - 20121031 X-CanIt-Archive-Cluster: irqpXI7aJGyo4Ewta7qVH399FOg X-Scanned-By: CanIt (www . roaringpenguin . com) on 174.142.115.36

    Read the article

  • Sending USR2 to mongrel_rails sometimes results in an “Address already in use” on the restart

    - by Ben
    We have a rolling-restart mode for our mongrel cluster that sends a USR2 signal to each running process. This works great, most of the time. But very occasionally the mongrel process will shutdown, and then fail to restart, with the following error: /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/tcphack.rb:12:in `initialize_without_backlog': Address already in use - bind(2) (Errno::EADDRINUSE) from /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/tcphack.rb:12:in `initialize' from /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:93:in `new' from /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:93:in `initialize' from /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/configurator.rb:139:in `new' from /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/configurator.rb:139:in `listener' Looking though the mongrel source, the USR2 handler calls a synchronous stop on the running server, so it ought to block until the socket has been released. Has anyone seen this error? Does anyone have any ideas what might cause it? (I asked this question over on StackOverflow initially, but thought it might be more appropriate here)

    Read the article

  • Multiple authoritative DNS server on same IPv4 address

    - by Adrien Clerc
    I'd like to maintain a DNS tunnel on my self-hosted server at example.com. I also have a DNS server on it, which serves everything for example.com. I'm currently using dns2tcp for DNS tunneling, on the domain tunnel.example.com. NSD3 is used for serving authoritative zones, because it is both simple and secure. However, I have only one public IPv4 address, which means that NSD and dns2tcp can't listen on the same IP/port. So I'm currently using PowerDNS Recursor using the forward-zones parameter like this: forward-zones-recurse=tunnel.example.com=1.2.3.4:5354 forward-zones=example.com=1.2.3.4:5353 This enables request for authoritative zone to be asked to the correct server, as well as for tunnel requests. NSD is listening on port 5353 and dns2tcp on port 5354. However, this is bad, because the recursor needs to be open. And it actually answers to any recursive query. Do you have any solution for that? I really prefer a solution that doesn't involve setting up BIND, but if you are in the mood to convince me, don't hesitate to do so ;) EDIT: I change the title to be clearer.

    Read the article

  • Preventing access to files if a user types the full url on the address bar

    - by bogha
    i have a website, some folders on the websites contains images and files like .pdf , .doc and .docx . the user can easly just type the address in the url to get the file or display the photo http://site/folder1/img/pic1.jpg then boom.. he can see the image or just download the file my question is: how to prevent this kind of action, how can i guarantee a secure access of the files. any suggestions UPDATE TO CLARIFY MY IDEA i don't want any user who is browsing the website to get access to these files normally by just writing the URL of the file. those files are a CV files, they are being uploaded by the users to a specific folder on the server which we host outside the company. those files are only being viewed by the HR people through a special system. that's the scenario we want. i don't want a WEB GEEK who just wants to see what files has been uploaded to this folder to download them easly to his/her computer and view them or publish them on the internet. i hope you got my idea

    Read the article

  • When I restart my virtual enviorment it does not re-bind to the IP address

    - by RoboTamer
    The IP does no longer respond to a remote ping With restart I mean: lxc-stop -n vm3 lxc-start -n vm3 -f /etc/lxc/vm3.conf -d -- /etc/network/interfaces auto lo iface lo inet loopback up route add -net 127.0.0.0 netmask 255.0.0.0 dev lo down route add -net 127.0.0.0 netmask 255.0.0.0 dev lo # device: eth0 auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.22.189.58 netmask 255.255.255.248 gateway 192.22.189.57 broadcast 192.22.189.63 bridge_ports eth0 bridge_fd 0 bridge_hello 2 bridge_maxage 12 bridge_stp off post-up ip route add 192.22.189.59 dev br0 post-up ip route add 192.22.189.60 dev br0 post-up ip route add 192.22.189.61 dev br0 post-up ip route add 192.22.189.62 dev br0 -- /etc/lxc/vm3.conf lxc.utsname = vm3 lxc.rootfs = /var/lib/lxc/vm3/rootfs lxc.tty = 4 #lxc.pts = 1024 # pseudo tty instance for strict isolation lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.mtu = 1500 #lxc.cgroup.cpuset.cpus = 0 # security parameter lxc.cgroup.devices.deny = a # Deny all access to devices lxc.cgroup.devices.allow = c 1:3 rwm # dev/null lxc.cgroup.devices.allow = c 1:5 rwm # dev/zero lxc.cgroup.devices.allow = c 5:1 rwm # dev/console lxc.cgroup.devices.allow = c 5:0 rwm # dev/tty lxc.cgroup.devices.allow = c 4:0 rwm # dev/tty0 lxc.cgroup.devices.allow = c 4:1 rwm # dev/tty1 lxc.cgroup.devices.allow = c 4:2 rwm # dev/tty2 lxc.cgroup.devices.allow = c 1:9 rwm # dev/urandon lxc.cgroup.devices.allow = c 1:8 rwm # dev/random lxc.cgroup.devices.allow = c 136:* rwm # dev/pts/* lxc.cgroup.devices.allow = c 5:2 rwm # dev/pts/ptmx lxc.cgroup.devices.allow = c 254:0 rwm # rtc # mounts point lxc.mount.entry=proc /var/lib/lxc/vm3/rootfs/proc proc nodev,noexec,nosuid 0 0 lxc.mount.entry=devpts /var/lib/lxc/vm3/rootfs/dev/pts devpts defaults 0 0 lxc.mount.entry=sysfs /var/lib/lxc/vm3/rootfs/sys sysfs defaults 0 0

    Read the article

  • (Apache) RedirectMatch regex to match all directories except those in my list

    - by dotben
    I need to 301 redirect all requests coming in for requests to http//server.com to be redirected to http//newserver.com unless the request is for an arbitary list of directories we are maintaining on the legacy server (eg server.com/foo or server.com/bar) I'm having a hard time working out how best to set this up and the regexs. EG, I need: http//server.com/page1 redirect to http//newserver.com/page1 http//server.com/dir1/page2 redirect to http//newserver.com/dir1/page2 http//server.com/foo to load as normal http//server.com/bar/baz.html to load as normal ... because 'foo' and 'bar' are in my list of legacy dirs. I'm wondering if the way to do this is to some how catch the matches in my list and then redirect anything else as a wildcard over to the new server -- but I can't make it work. Can anyone help me with some regex and rewrites for those please? Thanks (apologies for fudging the http:// in the urls, ServerFault thinks I'm posting hyperlinks and won't otherwise let me post this)

    Read the article

  • List files with last access date in linux

    - by kayaker243
    I'd like to clean up a server that my webmaster let turn into a mess. I know how to list all files not accessed within the last x days using find and -atime, but what I'm looking for is to come up with a listing of the last access date for files one level down in directory /foo: /foo/bar1.txt Dec 11, 2001 /foo/bar2.txt Nov 12, 2008 /foo/bar3.txt Jan 12, 2004 For folders one level down in directory /foo, list the date of the most recently accessed file within the directory (no limit on depth for identifying last access date) /foo/bar1/ Feb 13, 2012 /foo/bar2/ Oct 11, 2008 Where /foo/bar1/ has a file modified Jan 1, 1998 and Feb 13, 2012 and /foo/bar2/ has 30 files, most recent of which was accessed Oct 11, 2008. This question is similar to: http://stackoverflow.com/questions/5566310/how-to-recursively-find-and-list-the-latest-modified-files-in-a-directory-with-s but rather than the modification date, the date of interest is the last accessed date.

    Read the article

  • Basic IP address structure

    - by dannymcc
    We currently have a few servers, around 30-40 workstations and 16 phones. Each device has a static IP address. As an example the standard settings for a new workstation is; IP: 192.168.1.XXX Subnet: 255.255.255.0 Gateway: 192.168.1.99 DNS: 192.168.1.50 As I am slowly exploring new server OS's and virtualisation etc. I am getting close to wanting a wider range of IP addresses. What I would like to do is seperate the devices by IP as follows: Servers 192.168.1.XXX Workstations 192.168.2.XXX Printers 192.168.3.XXX Phones 192.168.4.XXX VM's 192.168.5.XXX Is this a bad idea, or is this a common way of doing things? My biggest concern is the phones and subnet masks. The phones are managed by our provider although I have access to the server that runs them. Would I need to change the subnet mask to 255.255.0.0 on all devices? Or only those that change? For example, the phones don't need to connect to any other devices other than other phones and the phone server. So if I have the phones on 192.168.1.XXX with a subnet mask of 255.255.255.0 and then moved everything I had complete ownership/control of to 192.168.X.XXX with a new subnet mask of 255.255.0.0. Would that work?

    Read the article

  • Can't Connect To Local Mysql Using IP Address, but CAN connect from remote server

    - by user1782041
    Here's an interesting one that does not seem to fall into any of the mysql connection issues I've read about or searched for: On an Ubuntu 12.04 box I had some system updates waiting to install, and I took care of that this evening. After the install, I started seeing some errors in my syslog complaining about a particular php script that could no longer connect to the mysql instance on the box. Here is the specific error: PHP Warning: mysql_connect(): Can't connect to MySQL server on '192.168.0.40' (4) Now, the server's IP address is 192.168.0.40, and I've checked to make sure that I have mysql listening on 0.0.0.0 so that I can connect using either "localhost" or "192.168.0.40". Here's where things get odd: From the local machine, if I try the following: mysql -uroot -p -h192.168.0.40 I get this error: ERROR 2003 (HY000): Can't connect to MySQL server on '192.168.0.40' (110) I've checked, and error 110 indicates an OS timeout, and error 2003 is the mysql generic "can't connect" error. This indicates that it is not permissions with the user. However, if I do the same thing from a remote machine (say, from 192.168.0.30), I log right in with no problems. Futher, other scripts on the local machine that connect to mysql using "localhost" for the host rather than "192.168.0.40" connect with no problems. Also, I can connect via the mysql socket with no problems both from the command line and php scripts. So, this feels like a networking issue of some kind on the local box, but there are no iptables rules on this box (it is firewalled externally) and I can't figure out what else may be causing this. This problematic script worked perfectly prior to the latest system update. For now, I'll simply change the script to connect via localhost, but I'd really like to know why it broke for 2 reasons: There may be other scripts that connect using 192.168.0.40 that don't run very often which are now broken. Auditing them all will take more time than I feel like devoting at the moment. I'm curious, and want to know why it broke so I can fix it correctly. Any help?

    Read the article

  • Second ip address on same interface CentOS 6.3

    - by user16081
    I tried to add a second LAN addresses in CentOS 6.3 on a brand new install and it's not working. I installed a new copy of CentOS 5.7 and tried the same and it worked right away. Now I'm just trying to setup the alias on the same subnet and it's not working. what am i doing wrong, is this not possible on CentOS 6.3? second ip address on the same interface but on a different subnet CentOS 5.7 it works: DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.167 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.166 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes On CentOS 6.3: does not work DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.242 NETMASK=255.255.255.0 NETWORK=192.168.0.0 GATEWAY=192.168.0.1 ONBOOT=yes DNS1=205.134.232.138 DNS2=4.4.4.4 DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.240 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes # /etc/init.d/network restart Shutting down interface eth0: Device state: 3 (disconnected) [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK Bringing up interface eth0: Active connection state: activated Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/3 [ OK ] # ping 192.168.0.240 PING 192.168.0.240 (192.168.0.240) 56(84) bytes of data. From 192.168.0.242 icmp_seq=2 Destination Host Unreachable Appreciate any advice, thanks Update: Perhaps this is relevant? On CentOS 5.7: # dmesg |grep eth eth0: registered as PCnet/PCI II 79C970A eth0: link up eth0: link up On 6.3: # dmesg | grep eth e1000 0000:02:00.0: eth0: (PCI:66MHz:32-bit) 00:0c:29:1e:de:86 e1000 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None 8021q: adding VLAN 0 to HW filter on device eth0 eth0: no IPv6 routers present

    Read the article

  • NOQUEUE: SYSERR(root): opendaemonsocket: daemon MTA-v4: cannot bind: Address already in use

    - by Francesco
    I have an issue with sendmail on my server (ubuntu 12.10) with php, mysql,and wordpress installed. Basically I want to create a contact form in my blog to receive emails from visitors directly into my gmail account but it doest work! I created a php file called testmail.php to recall it from the browser: <?php $to = '[email protected]'; $subbject = 'TEST MAIL'; $msg = 'test test test test test test test test test test test test test test test'; $isMailed = mail($to, $subbject, $msg, 'From:me <[email protected]>'); if($isMailed) echo 'mail has been send to: ' . $to; else echo 'mail has NOT been send..'; ?> But I dont receive anything! The /var/log/mail.log says: NOQUEUE: SYSERR(root): opendaemonsocket: daemon MTA-v4: cannot bind: Address already in use What do i do wrong? Where do I need to check? What info do you need more? I checked also into the spam folder, nothing. Thank you!

    Read the article

  • Apache 403 Forbidden Error when accessing local web server using local IP address

    - by amjo324
    I have an odd problem when attempting to browse to pages stored on a local web server (Apache 2.2). The pages are served as expected when I browse to localhost or 127.0.0.1 on port 80. Yet when I attempt to browse to the same pages by referencing the local IP address (192.168.x.x), I receive a HTTP 403 (Forbidden) error. In essence, http://localhost:80 works but 192.168.x.x:80 doesn't even though I'm specifying the IP of the local machine. You may be thinking "who cares? just use localhost". However, this is the first step in troubleshooting why I cannot remotely access these pages from different hosts on my LAN. I'm presuming this can't be a firewall issue as I'm only connecting to the local machine. Even so, I verified there was no iptables rules that could be having an effect. I've checked the Apache error logs and the corresponding line of relevance is: [Sat Oct 19 07:38:35 2013] [error] [client 192.168.x.x] client denied by server configuration: /var/www/ I've inspected most of the apache config files and they don't appear to differ from what you would expect with a default install. I can't see anything in apache2.conf that would be a problem and httpd.conf is an empty file. This is an excerpt from /etc/apache2/sites-enabled/000-default: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> Any insight as to where I can look next to find a solution ? Thanks in advance.

    Read the article

  • OpenVPN bad source address from client

    - by Bogdan
    I have one problem with OpenVPN. There are a lot drops records in the openvpn log file on the server: Mon Oct 22 10:14:41 2012 us=726541 laptop/???:1194 MULTI: bad source address from client [192.168.1.107], packet dropped grep -E "^[a-z]" server.conf ----- port 1194 proto udp dev tun ca data/ca.crt cert data/server.crt key data/server.key dh data/dh1024.pem tls-server tls-auth data/ta.key 0 remote-cert-tls client cipher AES-256-CBC tun-mtu 1200 server 10.10.10.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" client-to-client client-config-dir /etc/openvpn/ccd route 10.10.10.0 255.255.255.0 keepalive 10 120 comp-lzo persist-key persist-tun max-clients 5 status /var/log/status-openvpn.log log /var/log/openvpn.log verb 4 auth-user-pass-verify /etc/openvpn/verify.sh via-file tmp-dir /tmp script-security 2 ----- cat ccd/laptop ----- iroute 10.10.10.0 255.255.255.0 ----- cat client.conf ----- remote server ip 1194 client dev tun ping 10 comp-lzo proto udp tls-client tls-auth data/ta.key 1 pkcs12 data/vpn.laptop.p12 remote-cert-tls server #ns-cert-type server persist-key persist-tun cipher AES-256-CBC verb 3 pull auth-user-pass /home/user/.openvpn/users.db ----- According to "Jan Just Keijser - OpenVPN 2 Cookbook" root of the problem is incorrect config options.see the screenshot But, as you see, my config has such options. Could you please help me to solve this problem. @week Verb leverl=6; client log. Mon Oct 22 16:06:02 2012 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Mon Oct 22 16:06:02 2012 /sbin/ifconfig tun0 10.10.10.3 pointopoint 10.10.10.5 mtu 1500 Mon Oct 22 16:06:02 2012 /sbin/route add -net xxxx netmask 255.255.255.255 gw 192.168.1.1 Mon Oct 22 16:06:02 2012 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 Initialization Sequence Completed cat ccd/latop iroute 10.10.10.0 255.255.255.0 ifconfig-push 10.10.10.3 10.10.10.5

    Read the article

  • IP address reuse on macvlan devices

    - by Alex Bubnoff
    I'm trying to create easy to use and possibly simple testing environment for some product and got some strange behaviour of macvlan's. What I'm trying to achieve: make a toolset for one-line start/stop of lxc containers(via docker) bound to external ip(I have enough of it on host machine). So, I'm doing something like this: docker run -d -name=container_name container_image pipework eth1 container_name ip/prefix_len@gateway and pipework here does this: GUEST_IFNAME=ph$NSPID$eth1 ip link add link eth1 dev $GUEST_IFNAME type macvlan mode bridge ip link set eth1 up ip link set $GUEST_IFNAME netns $NSPID ip netns exec $NSPID ip link set $GUEST_IFNAME name eth1 ip netns exec $NSPID ip addr add $IPADDR dev eth1 ip netns exec $NSPID ip route delete default ip netns exec $NSPID ip link set eth1 up ip netns exec $NSPID ip route replace default via $GATEWAY ip netns exec $NSPID arping -c 1 -A -I eth1 $IPADDR And it works for first time per IP. But for second time and later packets for containers IP isn't getting into container, while all configuration seem fine. So it looks like this: External machine ? ping 212.76.131.212 ....silence.... Host machine root@ubuntu:~# ip link show eth1 2: eth1: mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:15:17:c9:e1:c9 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip addr show eth1 2: eth1: mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:15:17:c9:e1:c9 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# tcpdump -v -i eth1 icmp tcpdump: WARNING: eth1: no IPv4 address assigned tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes 00:00:46.542042 IP (tos 0x0, ttl 60, id 9623, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2345, length 64 00:00:47.549969 IP (tos 0x0, ttl 60, id 9624, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2346, length 64 00:00:48.558143 IP (tos 0x0, ttl 60, id 9625, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2347, length 64 00:00:49.566319 IP (tos 0x0, ttl 60, id 9626, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2348, length 64 00:00:50.573999 IP (tos 0x0, ttl 60, id 9627, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2349, length 64 ^C 5 packets captured 5 packets received by filter 0 packets dropped by kernel 1 packet dropped by interface Host machine, netns of container root@ubuntu:~# ip netns exec 32053 ip link show eth1 48: eth1@if2: mtu 1500 qdisc noqueue state UNKNOWN link/ether b2:12:f7:cc:a1:9d brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip netns exec 32053 ip addr show eth1 48: eth1@if2: mtu 1500 qdisc noqueue state UNKNOWN link/ether b2:12:f7:cc:a1:9d brd ff:ff:ff:ff:ff:ff inet 212.76.131.212/29 scope global eth1 inet6 fe80::b012:f7ff:fecc:a19d/64 scope link valid_lft forever preferred_lft forever root@ubuntu:~# ip netns exec 32053 tcpdump -v -i eth1 icmp tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes ....silence.... ^C 0 packets captured 0 packets received by filter 0 packets dropped by kernel So, can anyone say, what can it be? Can this be caused by not a bug in macvlan implementation? Is there any tools I can use to debug that configuration?

    Read the article

  • Multi-IP address zimbra server DNS PTR records and spam

    - by David Fraser
    We have a mail server running Zimbra (ZCS 6.0.8). The server has 5 active public IP addresses in the same subnet. (.226-.230). I currently have A records for each of these (host0.domain.com..host4.domain.com), with the main host.domain.com of the machine pointing to .226. Our host has ended up being listed on the SORBS DUHL list (even though it's in a server farm). According to them you can get removed quickly by checking that your host has an MX record, an A record, and a PTR record that points back to the hostname given in the MX record. I tried setting the PTR records so that each of these addresses resolved back to their A record (i.e. .228 had a PTR to host2.domain.com). However, I then got mail being rejected from other servers because when Postfix (under Zimbra control) sends out mail, it uses the main hostname for the HELO - there doesn't seem to be any way to override it. So the PTR records currently say host.domain.com for all 5 IP addresses. What's the correct way to handle this? Should I have an A record for the domain that points to all the IP addresses (for round-robin handling)? I'm nervous of changes that could cause problems, so I'm wondering what the standard way to handle a multiple-IP-address mail server is.

    Read the article

  • Why is my global security group being filtered out of my logon token?

    - by Jay Michaud
    While investigating the effects of filtered tokens on my file permissions, I noticed that one of my global security groups is being filtered in addition to the regular system-defined filtered groups. My Active Directory environment is a single-domain forest on the Windows Server 2003 functional level. I'll call the domain "mydomain.example.com". I am logged onto a Windows Server 2008 Enterprise Edition machine (not a domain controller) as a member of the "MYDOMAIN\Domain Admins" group and the "MYDOMAIN\MySecurityGroup" global security group (among others). When I run "whoami /groups" from an elevated command prompt, I see the full list of groups to which my account belongs as expected. When I run "whoami /groups" from a regular, non-elevated command prompt, I see the same list of groups, but the following groups are described as "Group used for deny only". BUILTIN\Administrators MYDOMAIN\Schema Admins MYDOMAIN\Offer Remote Assistance Helpers MYDOMAIN\MySecurityGroup Numbers 1 through 3 above are expected based on Microsoft documentation; number 4 is not. The "MYDOMAIN\MySecurityGroup" global security group is a group that I created. It contains three non-built-in global security groups, and these security groups contain only non-built-in user accounts. (That is, I created all of the accounts and groups that are members of the "MYDOMAIN\MySecurityGroup" global security group.) There are other, similar groups of which my account is a member that are not being filtered out of my logon token, and this group is not granted any specific user rights in the security settings of this computer or in Group Policy. What would cause this one group to be filtered out of my logon token?

    Read the article

  • Search for partial IP address using Windows Search?

    - by Dr. Dre
    I have a folder, c:\projects\, added to Windows Index. I know the indexing is working because I search for stuff in this folder all the time and the results come up very fast, and I've never noticed any accuracy problem until now. (I have had to tweak Indexing options to expand which file types have their contents indexed rather than just the file name, etc, but after that Search has worked pretty well for me). I've encountered a problem while trying to search for references to a particular IP address subnet. I'm trying to find all references to IP's with the pattern "192.168.220.xxx" (AKA, the 192.168.220.0/24, AKA 192.168.220.0/255.255.255.0 IP/netmask). Within Windows Explorer: c:\projects**.* is indexed c:\projects\work\project1\network_list.txt contains several "192.168.220.xxx" IP's Indexing status says all items are indexed (193,000 items). When I try to search for partial IP match, there are no search results. Tried searching for: 192.168.220, 192.168, 192.168.220., 192.168.220., 192.168.220.?, 192.168.220.??, 192.168.220.???, 192.168., 192.168.. Also tried variants of all the above surrounded with double quotes. All the searches returned 0 results. Within MS Outlook 2007: My mailbox, and all my offline .pst's are indexed. I search in Outlook pretty frequently, so I'm pretty sure indexed searches work across inbox and all .pst's. Indexing status in Outlook says all items are indexed. I also have references to these IP's in email, and I'd like to find all of them. Basically same deal as above, can't search for "192.168.220.xxx" IP's. Any way to fix this?

    Read the article

  • Understanding List formatting in MSWord

    - by John
    I've never understood how formatting works in MSWord for lists... it mostly just works but sometimes becomes incredibly stubborn about enforcing styles you don't want, especially when copy-pasting into a list and working with multiple, multi-layer lists. What are some good ways to understand how it works, so one can work with Word, instead of fighting against it? Here's an example... I want a list like: 1)first test CHECK: a)something b)another thing 2)another test CHECK: a)it works b)it doesn't crash I find Word really doesn't like this... I try creating one mini-list and copy pasting but typically the numbering on the sub-lists doesn't re-start automatically, etc. I'm using Word 2007 but I remember it being this way in earlier versions too.

    Read the article

  • Use apt-get source on a debian repo without using /etc/apt/source.list

    - by Erwan Queffélec
    I'm trying to use apt-get source as a regular user on a debian squeeze system. I want to retrieve the sources for cyrus-imapd-2.4 from the testing/wheezy repository. apt-get source works without root privileges; however, it seems there is no way to get apt-get to fetch anything from a repository that is not in /etc/apt/sources.list. Is there any command line option, alternate sources.list file, environment variable that will get apt to work with a custom repository ? I do have root access so I could change the /etc/apt/sources.list, however I really do not want to do that for a number of reason.

    Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >