Search Results

Search found 22380 results on 896 pages for 'hard drive failure'.

Page 117/896 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• Partition table correpted in windows 7 machine as simple dynamic partition

  - by raki

  I have Windows 7 installed in my system. When I originally partitioned it I made 3 partitions and 16 gb space as unallocated. Later I tried to create a partition using this free space using diskmanagement tool. It shows free space as unusabe space and the only one option available is to make it as a simple partition. Unfortunately I made it as simple partition and all my partitions converted to simple dynamic partition. Now after reboot the OS is not loading. I tried to reinstall the OS by formatting the C drive, but it doesn't work. Now I can't load the OS properly. How can I install Windows 7 on my system without losing my data on the other two drives?

  Read the article

• How can I increase the size of a Windows 2003 NTFS partition?

  - by waszkiewicz

  Hi everybody! I have a very important server running Windows Server 2003 and my System partition is becoming too small, it's slowing down the machine. I have already tried all the cleaning stuff and transferring some "unimportant softs" on the "Saves" partition but it didn't help much at all. Is there a way to re-partition my hard-drive that will work on a 2003 Server, that's not too expensive and that could be used without turning the machine off. If there is no other way, then I'll have to reinstall the OS, but it will have to wait for the weekend. Thanks for your suggestions.

  Read the article

• Sharing an external hard drive in Ubuntu using Samba

  - by cambraca

  /media/MYDISK is where my hard drive is mounted automatically. I created a symlink using: ln -s /media/MYDISK /home/camilo/MYDISK chmod 777 /home/camilo/MYDISK I'm setting up smb.conf like this: [myshare1] comment = external disk browsable = yes path = /home/camilo/MYDISK guest ok = yes read only = no create mask = 0775 Also, in the [global] section I tried adding the following lines: follow symlinks = yes wide links = yes unix extensions = no The problem is that when browsing the shared folder in Windows 7, I get a "\\etc\myshare1 is not accessible" error. When pointing the path to a regular folder it works fine. Also, when I point it directly to /media/MYDISK, it shows the same error. EDIT: to make it more interesting, I have no graphical interface, so I need to touch the config files directly..

  Read the article

• What does this WinImage Error Mean?

  - by Kryten

  Hi, I am using WinImage (version 8.0) on Windows XP SP3 to create a VHD File from my Hard Drive, however, everytime I try to, everytime it says: "I/O error in reading data on position 000000007cd40000:00010000. Error 23: Data Error (cyclic redundancy check)." with the options "Abort", "Retry", "Skip" & "Skip All". Everytime I try "Retry" the message comes, if I click skip another message comes up (same as above, except the data position). I have run "CHKDSK /F /R" several times, but the error always appears. What is wrong? Can I safely skip the Errors? Is there anything I can do to fix the error?

  Read the article

• diagnose "corrupt file" problems

  - by Matthew

  My computer has been crashing the last couple weeks pretty regularly (at least once a day). A lot of times things I do will display a little notification in the bottom right saying something about a corrupt file. (I'm on Windows XP Pro Service Pack 3). When the computer does crash I get the "blue screen of death" usually. Some of the notifications also advise running the chkdsk utility. I cannot get it to successfully run. Using the command prompt (or even the "tools" menu after right clicking the drive and choosing properties), it will not run the utility (it says "do you want to schedule it to run next boot time" or whatever, which I confirm). The problem is that most of the time after restarting, it doesn't run at all. The few times it does run, it has an error (I can't remember the error right now, it at least says it's ntfs and such) and says disk checking will end. How can I get it to successfully run?

  Read the article

• Partition table correpted in windows 7 machine as simple dynamic partition

  - by raki

  I have Windows 7 installed in my system. When I originally partitioned it I made 3 partitions and 16 gb space as unallocated. Later I tried to create a partition using this free space using diskmanagement tool. It shows free space as unusabe space and the only one option available is to make it as a simple partition. Unfortunately I made it as simple partition and all my partitions converted to simple dynamic partition. Now after reboot the OS is not loading. I tried to reinstall the OS by formatting the C drive, but it doesn't work. Now I can't load the OS properly. How can I install Windows 7 on my system without losing my data on the other two drives?

  Read the article

• Debian Harddrive Fdisk - Same ID's and changing letters

  - by James Willson

  I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

  Read the article

• Suggestion for boot manager in external hard disk

  - by Korrupzion

  Hi, I just bought an 1TB External Hard drive with eSATA, USB, FW400/800 (LaCie if you are interested). I already put the windows 7 installation in a FAT32 active partition so i can plug the HDD via USB, since my notebook or other computers doesn't support boot via eSATA commonly, and it works. Now i want to do more partitions so i'm looking for a way to have a boot manager as active partitions that allows me to boot from different partitions in my HDD (win7, ubuntu installations for example) I want to know if you know any software to do this or you already have this system. Thanks and sorry i have too many grammar errors because english is not my native language :)

  Read the article

• Will I be abled to access 2nd HDD from dual-boot

  - by Ruben

  I'm planning to have a dual-boot on my computer. I have 2 physical hard drives, one 500GB and one 2TB. What I want to do, is have a dual-boot setup (2 partitions, both 50 GB) for Windows 8 and Windows 7. But will I be able to access the 3rd partition on the disk, or the other disk from both OSs? In this case, it would be really useful to access files and install programs, because I could use them on both OSs, as long as I have the same registry keys.

  Read the article

• Trouble accessing network drives in Windows 7

  - by Warlax

  Hi, Recently purchased a LaCiE network drive. Connected it to my router, configured it, added a user for myself. Installed the "Network Assistant" that came with it - no problem. Went to My Computer Network, found the network drive - was prompted for a login/password to see the contents, types \user and password (leading slash to get rid of DOMAIN) and accesses contents. There is one open share that I can access/mount without problem and there's another share with my user name as set-up via the network drive's web-based config. Double-clicked on that, prompted again. user/password doesn't work! It says I have no permissions but the user/pass combination is PERFECT. Some Windows Vista posts talk about a Local Security Policy menu - but that's nowhere to be found. Any ideas? (Windows 7 Professional BTW).

  Read the article

• Spanned volumes on new install

  - by Noio

  My Windows 7 Release Candidate is about to expire, so I'm going to do a clean install of a retail version. I have two volumes, on four physical drives, as follows: Disk 0: Spanned Volume (D:) Disk 1: Primary Partition, Boot/Windows Install (C:) Disk 2: Spanned Volume (D:) Disk 3: Spanned Volume (D:) If I install Windows to a formatted drive 1, will it still recognize the spanned volume in Disks 0, 2, and 3? The spanned volume is not redundant in any way, so the volume is 1.5TB consisting of three 500GB disks. I don't have the space to do an external backup, and I thought it was impossible to convert a spanned volume back to a basic volume.

  Read the article

• Looking for a free or open-source burner emulator [closed]

  - by Jared Harley

  Possible Duplicate: Virtual CDR driver I am looking for a free or open-source virtual CD/DVD emulator to run in a Windows environment. What I want is similar to what SlySoft's Virtual Clone Drive or Daemon Tools provides, but the emulated drive needs to be a burner of some type. The burner should be able to save disc images (.iso, .ccd, etc) to my harddrive - basically, the same as if I burned the files to a CD-R, and then ripped them back to a disc image. I have already looked around some and come across 2 - DVD neXt COPY iTurns and NoteBurner M4P. Both of these programs create a virtual CD-RW drive, but they are integrated into their product (for burning from iTunes to create mp3 files) and cannot create disc images. I am currently writing a piece of software that will have the capability to burn disc images onto CDs/DVDs, and I don't want to end up with a 100 coasters while I'm testing my software. Anyone have any ideas? Related ServerFault queston: Create netbook recovery image without DVD burner (virtual burner?)

  Read the article

• Why does DBAN crash on my HDDs?

  - by John Watson

  I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

  Read the article

• What's the best way to format an external HDD for both OSX and Windows ?

  - by George Profenza

  I have an external HDD (1TB) and I'd like to use it on OSX and Windows. I had another external HDD using NTFS and I used NTFS-3G on osx to write files, but I found the reading/writing very slow. Googling a bit I see many people recommend HFS+ in conjuction with HFS Explorer for Windows. Is this the best way ? Is it possible to have two partitions, one HFS+ and one NTFS ? Is it a good option or is it better to use one partition ? I've seen this thread on using UDF for USB flash drive. Would that be suited for an USB external HDD ?

  Read the article

• Can't select hard disk off Windows 7 system image creator

  - by David

  When I try to create a system image in Windows 7 from the Control Panel (Control Panel\All Control Panel Items\Backup and Restore) I get the option to select a hard disk or a removeable disk to select, I have 2 disks and wanted to create the image on my spare one. However when I click refresh it doesn't show either of my disks but shows my CDROM under the removable disks area, anyone have this problem? Also, when I select a USB disk instead, it tries to iamge both my disks! I can't select my active Windows 7 installed disk! How pointless!

  Read the article

• Delete the pendrive contents and also trash in Mac OS X?

  - by Warrior

  I am using a MacBook Pro. I copied some data from my pen drive to my Mac and deleted the content by moving it to trash. After that when I see the info of pen drive it give more value than the original value. If I cleaned the content of the trash only I am able to see the correct value of pen drive and able to copy data. Has Mac been designed like that or is there some other way to delete other than using the "move to trash" option? Thanks.

  Read the article

• Ubuntu 9.10 LiveCD stalls after "Install Ubuntu" selected from boot menu on eMachines

  - by nicorellius

  I am trying to install Ubuntu 9.10 from the ISO on a CD (it needs to be this version) on an eMachine with a brand new Seagate hard disk. The CD boots OK, and I choose the language. Then I am presented with the boot menu: Try Ubuntu Install Ubuntu etc I have tried the top two choices several times (trying Ubuntu and installing it), but each and every time the installation stalls and the disc stops spinning right after I hit enter after choosing the option I want. I have tried different CD/DVD drives, changing the jumpers on both CD drives, different hard drives, and nothing works. Maybe there is a BIOS setting that is choking the installation? Any help would be appreciated. Edit - I just tried running the hard drive as the master on the primary IDE and the CD drive as the slave on the primary with the same results. Maybe flash the BIOS?

  Read the article

• Recommendations for stable, reliable flash drives

  - by Josh Kelley

  We're looking to purchase some flash drives for use in some embedded devices. Most of our requirements aren't too different the generic "good, fast" flash drive: reliability is very important, speed is good, and so that the drive will fit, the case shouldn't be too large (so no OCZ Throttles). Consistency is also a major priority; we'd like to be able to buy more or less the same product a year or two from now without having to worry about the manufacturer swapping drive components with less reliable or slower parts. (We've been burned already by our previous manufacturer doing this.) Any recommendations, especially regarding consistency? I can read Ars Technica to get an overview of current models, but what are consistently good models?

  Read the article

• Why are my flash drives getting formatted?

  - by user13743

  I've had two cheapie flash drive from Microcenter, and they booth out-of-the-blue became unformatted. When you insert then in the USB drive, windows says "The drive is not formatted. Do you want to format it now?" And then it can't actually format it. Nothing happened to them physically. For one, it 'died' during a reset, and the other, it was normal and then it was dead once when I inserted it, IIRC. What's the deal? Are these just cheap, crappy drives, or what?

  Read the article

• Can Windows 7 restore itself from image to a smaller HDD than original?

  - by Borek

  I've created a full system image using the built-in Win7 utility, it was from a 300GB drive but there is only about 50GB of data. I then swapped disks in my notebook, the new one being 80GB SSD and now when I boot to the system restore applet, go through all of the settings (finding the backed up image on a network share, confirming that I'm willing to repartition my disk etc.), I get this: The system image restore failed. No disk that can be used for recovering the system disk can be found. [Details] Is this because I'm trying to restore to a smaller disk? (Even though the data should fit without any problems, there being only 50GB of it.)

  Read the article

• Calculating IOPS for a single HDD - what am I doing wrong?

  - by red888

  So I know there is no standardized way of calculating IOPS for a HDD, but from everything I have read it appears one of the most accurate formulas is the following: IOP/ms = + {rotational latency} + ({block size} / {data transfer rate}) Which is IOs per millisecond or what the book I've been reading calls "Disk Service Time". Also rotational latency is calculated as half of one rotation in milliseconds. This was taken from the EMC book "Information Storage and Management" -arguably a pretty reliable source right\wrong? Putting this formula into practice consider this Seagate data sheet. I am going to calculate IOPS for the ST3000DM001 model for a block size of 4kb: Seek Average (Write) = 9.5 -I'll measuring IOPS for writes Spindle speed = 7200rpm Average Data Rate = 156MB/s So my variables are: Seek Time = 9.5ms Rotational latency = (.5 / (7200rpm / 60)) = 0.004s = 4ms Data Rate = 156MB/s = (0.156MB/ms / 0.004MB) = 39 9.5ms + 4ms + 39 = IO/ms 52.5 1 / (52.5 * 0.001) = 19 IOPS 19 IOPS for this drive clearly is not right so what am I doing wrong?

  Read the article

• Method for imaging a HDD? [closed]

  - by Sonny Ordell

  Possible Duplicate: Imaging new hard drive in Windows 7 laptop? I have to image my 320gb Laptop HDD before I send it in for repairs. The HDD is likely going to get replaced, and I would ideally like to be able to restore everything as I have it now without having to reinstall my OSes, programs and place all my files back again. I can make space on an external HDD I have, so am just looking for how I should go about this. Should I just use dd with a linux rescue cd? Or is there perhaps a more suitable program with its own rescue disk?

  Read the article

• Disable or sleep secondary HDD in Macbook

  - by cpak

  I've done some quick Googling but didn't find an answer. I've put an SSD in my Macbook, and at the same time moved the original HDD to the optical drive bay. I'm running the OS and most of my daily apps off the SDD so the HDD is really just for storing stuff I need now and then. Now I'd like to disable (as in power off or "force sleep") the HDD when I don't need it. Tried unmounting the disk using diskutil unmountDisk but it kept spinning for like 10 minutes. Maybe that's to be expected, but I'd imagined it would stop instantly on unmount. Also, it would be nice to have it disabled by default, and only mount it (= power on) when I need it. Grateful for any input on this!

  Read the article

• Easiest way to move my Windows installation to an SSD?

  - by Jon Artus

  I've taken the plunge and bought an SSD and want to move my existing Windows installation over. The current hard disk is 500Gb, but I've trimmed the contents down to about ~40Gb. I'm transferring it across to a 100Gb SSD and looking for the easiest way just to copy everything across and set the SSD up as a boot device. I've looked at a few tools like Macrium Reflect, but they don't seem able to restore to a smaller drive. Do I need to go for something like PING to do this? I'm trying to avoid scary Linux-based boot utilities if possible, does anyone know of an easier way?

  Read the article

• Operating System Not Found - BIOS recognizes, Live OS doesn't (Laptop)

  - by Klaus Borges

  Here's the deal: I have a multi-partitioned hard drive on my laptop set up with GRUB. I got a blue-screen while working on Windows 7 and when rebooting I got the Operating System Not Found error message. I rebooted the computer once again and entered the BIOS setup just to see if recognized my HDD - it did. Next step for me was booting a Live CD and seeing if I could repair GRUB or at least check if something changed on the partitions, but it doesn't seem to recognize anything there. Tried blkid, fdisk -l, not even GParted can see it. What should I do?

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >