Search Results

Search found 23832 results on 954 pages for 'home drive'.

Page 117/954 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

  • Is PLC speed affected by mixing different devices?

    - by CFP
    Hello everyone! At home, I have 4 PLC devices for my home network. Two of them are 85Mb/s powerlan PLC adapters, while the others are 10Mbps powerlan PLC adapters. I have not been able to determine reliably whether the presence of the 10Mb/s ones impact on the speed of the 85Mb/s ones. Is it possible that the bitrate is limited by the slowest devices on the network? Thanks!

    Read the article

  • Does NAT change the source MAC address?

    - by user44073
    I'm trying to secure my home network but don't really need the complexity of a VPN so I'm trying to figure out other options. I'd like to allow my iPhone remote access to my home servers but I can't depend on the IP address because it changes quite often (due to the 3G network, etc). Can I filter incoming connections on my router (pfsense) by MAC address or does NAT change the source as it's passing through the different routers on the internet?

    Read the article

  • CentOS - Add additional hard drive raid arrays on Dell Perc 5/i card

    - by Quanano
    We have a Dell Poweredge 2900 system with Dell Perc 5/i card and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on one raid array on this controller with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l: Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v: [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod: Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log blkid: /dev/sda1: UUID="bc4777d9-ae2c-4c58-96ea-cedb342b8338" TYPE="ext4" /dev/sda2: UUID="j2wRZr-Mlko-QWBR-BndC-V2uN-vdhO-iKCuYu" TYPE="LVM2_member" /dev/mapper/vg_lal2server-lv_root: UUID="9238208a-1daf-4c3c-aa9b-469f0387ebee" TYPE="ext4" /dev/mapper/vg_lal2server-lv_swap: UUID="dbefb39c-5871-4bc9-b767-1ef18f12bd3d" TYPE="swap" /dev/mapper/vg_lal2server-lv_home: UUID="ec698993-08b7-443e-84f0-9f9cb31c5da8" TYPE="ext4" dmesg shows: megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi2 : LSI SAS based MegaRAID driver scsi 2:0:0:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:8:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 scsi 2:0:9:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 i.e. the 3 RAID Arrays Seagate Hitatchi and Fujitsu hard drives respectively. FURTHER UPDATE I have installed the megaraid storage manager console and connected to the server. It appears that the two CentOS installation hard drives are OK. The other 6 drives, one raid array of 4 and one raid array of 2 disks. The other drives are listed as (Foreign) Unconfigured Good.

    Read the article

  • How to include the login form on the Home index page in MVC

    - by Bernard Larouche
    Hi guys I really need your help for this. I am relatively new to programming and I need help to something that could be easy for a experienced programmer. I would like to get the login form that we get for free in an MVC application on the left sidebar of my Home index page instead of the usual Account/Login page. I am facing some problems. First I need a product object to be displayed on my Home Index page as well. What I did is that I added a product object to the LogOnModel that they provide in the AccountModels class and I created a UserControl (partial view) copying the content of the LogOn.aspx view. Now my Home index.aspx as well as my partial view inherits the LogOnModel class. I can see the Login form on my Home Index page as well as my product object BUT the login Form is never empty. The last username and password always appear there. I know I must have forgotten something or have done something wrong or the way did it is completely wrong !! Please could you give me some advice Thks <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<CoderForTradersSite.Models.LogOnModel>" %> <h4>Login Form</h4> <p> Please enter your username and password. <%= Html.ActionLink("Register", "Register") %> if you don't have an account. </p> <% using (Html.BeginForm()) { %> <%= Html.ValidationSummary(true, "Login was unsuccessful. Please correct the errors and try again.") %> <div> <fieldset> <legend>Account Information</legend> <div class="editor-label"> <%= Html.LabelFor(m => m.UserName) %> </div> <div class="editor-field"> <%= Html.TextBoxFor(m => m.UserName) %> <%= Html.ValidationMessageFor(m => m.UserName) %> </div> <div class="editor-label"> <%= Html.LabelFor(m => m.Password) %> </div> <div class="editor-field"> <%= Html.PasswordFor(m => m.Password) %> <%= Html.ValidationMessageFor(m => m.Password) %> </div> <div class="editor-label"> <%= Html.CheckBoxFor(m => m.RememberMe) %> <%= Html.LabelFor(m => m.RememberMe) %> </div> <p> <input type="submit" value="Log On" /> </p> </fieldset> </div> <% } %>

    Read the article

  • cannot make ubuntu 64-bit v12.04 install work

    - by honestann
    I decided it was time to update my ubuntu (single boot) computer from 64-bit v10.04 to 64-bit v12.04. Unfortunately, for some reason (or reasons) I just can't make it work. Note that I am attempting a fresh install of 64-bit v12.04 onto a new 3TB hard disk, not an upgrade of the 1TB hard disk that contains my working 64-bit v10.04 installation. To perform the attempted install of v12.04 I unplug the SATA cable from the 1TB drive and plug it into the 3TB drive (to avoid risking damage to my working v10.04 installation). I downloaded the ubuntu 64-bit v12.04 install DVD ISO file (~1.6 GB) from the ubuntu releases webpage and burned it onto a DVD. I have downloaded the DVD ISO file 3 times and burned 3 of these installation DVDs (twice with v10.04 and once with my winxp64 system), but none of them work. I run the "check disk" on the DVDs at the beginning of the installation process to assure the DVD is valid. When installation completes and the system boots the 3TB drive, it reports "unknown filesystem". After installation on the 250GB drives, the system boots up fine. During every install I plug the same SATA cable (sda) into only one disk drive (the 3TB or one of the 250GB drives) and leave the other disk drives unconnected (for simplicity). It is my understanding that 64-bit ubuntu (and 64-bit linux in general) has no problem with 3TB disk drives. In the BIOS I have tried having EFI set to "enabled" and "auto" with no apparent difference (no success). I never bothered setting the BIOS to "non-EFI". I have tried partitioning the drive in a few ways to see if that makes a difference, but so far it has not mattered. Typically I manually create partitions something like this: 8GB /boot ext4 8GB swap 3TB / ext4 But I've also tried the following, just in case it matters: 8GB boot efi 8GB swap 8GB /boot ext4 3TB / ext4 Note: In the partition dialog I specify bootup on the same drive I am partitioning and installing ubuntu v12.04 onto. It is a VERY DANGEROUS FACT that the default for this always comes up with the wrong drive (some other drive, generally the external drive). Unless I'm stupid or misunderstanding something, this is very wrong and very dangerous default behavior. Note: If I connect the SATA cable to the 1TB drive that has been my ubuntu 64-bit v10.04 system drive for the past 2 years, it boots up and runs fine. I guess there must be a log file somewhere, and maybe it gives some hints as to what the problem is. I should be able to boot off the 1TB drive with the 3TB drive connected as a secondary (non-boot) drive and get the log file, assuming there is one and someone tells me the name (and where to find it if the name is very generic). After installation on the 3TB drive completes and the system reboots, the following prints out on a black screen: Loading Operating System ... Boot from CD/DVD : Boot from CD/DVD : error: unknown filesystem grub rescue> Note: I have two DVD burners in the system, hence the duplicate line above. Note: I install and boot 64-bit ubuntu v12.04 on both of my 250GB in this same system, but still cannot make the 3TB drive boot. Sigh. Any ideas? ========== motherboard == gigabyte 990FXA-UD7 CPU == AMD FX-8150 8-core bulldozer @ 3.6 GHz RAM == 8GB of DDR3 in 2 sticks (matched pair) HDD == seagate 3TB SATA3 @ 7200 rpm (new install 64-bit v12.04 FAILS) HDD == seagate 1TB SATA3 @ 7200 rpm (64-bit v10.04 WORKS for two years) HDD == seagate 250GB SATA2 @ 7200 rpm (new install 64-bit v12.04 WORKS) HDD == seagate 250GB SATA2 @ 7200 rpm (new install 64-bit v12.04 WORKS) GPU == nvidia GTX-285 ??? == no overclocking or other funky business USB == external seagate 2TB HDD for making backups DVD == one bluray burner (SATA) DVD == one DVD burner (SATA) 64-bit ubuntu v10.04 has booted and run fine on the seagate 1TB drive for 2 years.

    Read the article

  • Accessing a file on a network drive

    - by Rekreativc
    Hello. Background: I have an application that has to read from files on a network drive (Z:) This works great in my office domain, however it does not work on site (in a different domain). As far as I can tell the domain users and network drives are set in the same way, however I do not have access to users etc in the customers domain. When I couldn't access the network drive I figured I needed a token for a user. This is how I impersionate the user: [DllImport("advapi32.dll", SetLastError = true, CharSet = CharSet.Unicode)] public static extern bool LogonUser(String lpszUsername, String lpszDomain, String lpszPassword, int dwLogonType, int dwLogonProvider, ref IntPtr phToken); ... const string userName = "Razvoj02"; const string pass = "Programer02"; const string domainName = null; const int LOGON32_PROVIDER_DEFAULT = 0; const int LOGON32_LOGON_INTERACTIVE = 2; IntPtr tokenHandle = new IntPtr(0); bool returnValue = LogonUser(userName, domainName, pass, LOGON32_LOGON_INTERACTIVE, LOGON32_PROVIDER_DEFAULT, ref tokenHandle); if (!returnValue) throw new Exception("Logon failed."); WindowsImpersonationContext impersonatedUser = null; try { WindowsIdentity wid = new WindowsIdentity(tokenHandle); impersonatedUser = wid.Impersonate(); } finally { if (impersonatedUser != null) impersonatedUser.Undo(); } Now here is the interesting/weird part. In my network the application can already access the network drive, and if I try to impersonate the active user (exactly the same user, including the same domain) it will not be able to access the network drive. This leaves me helpless since now I have no idea what works and what doesn't, and more to the point, will it work on site? What am I missing?

    Read the article

  • Permission denied: /home/.htaccess pcfg_openfile: unable to check htaccess file

    - by phoebebright
    This domain was working this morning, now I get a 403 error and the message above in my error log. I'm not using .htaccess files but I have been doing some copy on the server so may have messed things up but no changes to this domain (unless by accident!). What is this pcfg_openfile thing anyway? Done lots of googleing but none of the solutions seemed to fit these circumstances. Server is ubuntu Hardy Heron.

    Read the article

  • Home networking problem between power line communication and Ethernet

    - by pixeline
    My network runs through the electrical wiring of the house and is organised as such: Groundfloor: an ADSL+network switch, using DHCP (address : 172.19.3.1) (Mac) PCs connected via an electrical adapter (model: D-Link DHP-200) (1 per PC) First Floor: 1 switch (8 ports) connected via an electrical adapter (model: D-Link DHP-200) (address unknown) 2 Mac PCs connected (via RJ45 network wires) to that router using DHCP The Problem On the first floor, file tranfers between PCs are fast and perfect. But if I try to transfer files from or to a computer on the ground floor, the speed is slow and eventually the transfer dies out. The Question So I suspect the 1st floor switch is creating some kind of barrier (firewall?) preventing external PCs from accessing the PCs it is connected to? Am I right and if so, how could I disable that barrier?

    Read the article

  • WRTU54G-TM T-Mobile@Home router with 3rd party firmware

    - by dlamblin
    I've been doing a lot of reading online about the Linksys WRTU54G-TM router model that I now own. It seems getting a custom firmware onto it is not a problem. But no one is talking about retaining the Voip features (yet). So far they're all disappointed that it's not a SIP machine and used GSM over IPSec. Personally I don't care about using it with non-t-mobile. If I take the original firmware, shouldn't I be able to extract it, and it's SquashFS image, and then move all of the t-mobile specific binaries for enabling the calling features over to a custom firmware installation (maybe OpenWRT)? You might ask why, and the reason is, that if I do this I could retain my calling features, which I do want, and ssh to the router and use it to run additional software, as any OpenWRT router could do. Does anyone know if this can be done, and how the firmware's binaries could be gotten at and installed correctly?

    Read the article

  • How do I mount a HFS+ dd image in OSX?

    - by Paul McMillan
    I had an HFS+ formatted drive that was going bad and wouldn't mount at all on OSX. I created an image using ddrescue on linux, and was able to save most of it. I can mount the drive and see the data just fine in linux using this: mount -o loop -t hfsplus dd_image mountpoint This doesn't work on my OSX system since hfsplus isn't a valid filesystem type. If I try: mount -t hfs image mountpoint It complains that it needs a block device. What's the fix here?

    Read the article

  • DNS Piority in home-use Routers

    - by DucDigital
    Force DNS on router instead of ClientSide DNS like OpenDNS or GooglePublicDNS Im trying to implement some site blocking using DNS, the hardware is simple Routers like Linksys and Netgear that you use in house for family purpose. Currently I tried to set a computer to opendns, while my router set to something else, when check using opendns.com/welcome, the computer is identified as opendns. and Vice versa, this time the computer didn't identified as opendns. Is it posible to force user to use our DNS instead of their setting DNS?

    Read the article

  • DNS Piority in home-use Routers

    - by DucDigital
    Force DNS on router instead of ClientSide DNS like OpenDNS or GooglePublicDNS Im trying to implement some site blocking using DNS, the hardware is simple Routers like Linksys and Netgear that you use in house for family purpose. Currently I tried to set a computer to opendns, while my router set to something else, when check using opendns.com/welcome, the computer is identified as opendns. and Vice versa, this time the computer didn't identified as opendns. Is it posible to force user to use our DNS instead of their setting DNS?

    Read the article

  • What is the data transfer speeds within the disk, to other devices?

    - by Kumar
    I use Debian 6 on a HP Elitbook 6930 with 2Gigs of RAM. I was copying two AVI files, 1.5 GB in total, and noticed that the data copying was done at the rate of 4MB/sec. When I copy same AVIs to my Western Digital Passport 25G USB plugin drive the data transfer speed is 11+MB/sec. This speed is different if I plugin the drive to different USB ports. Interestingly, at work I also downloaded a 16MB IE8 exe on my virtual xp, run inside Oracle Sun Virtual Box, and it was downloaded AND saved within a second. We have a high speed network at work. :-) Why and how this difference in data speeds is possible?

    Read the article

  • Home CAT6 wiring: CMR vs CMP?

    - by Eddie Parker
    I'm planning on wiring my house with CAT6 cable. I'm finding a large jump in price between CMR and CMP cabling, and I'm confused by what counts as a 'plenum' and what does not. As I'm wiring my house, I'm planning on going through interior (hollow) walls, and through the attic and crawlspace to get to the points I wish to wire. I will be going between floors at one point, which leads me to believe I need at least CMR, and obviously CMP wouldn't hurt either. I don't mind spending the extra money if I need to, but is it overkill going for CMP if the bulk of the wires are either going vertical, or through a crawlspace or attic?

    Read the article

  • Vista home basic, "this folder is empty" problem

    - by peter m
    When I access my itunes folder in "my music" I see most but not all artist folders, when I access any of them I get "this folder is empty", When in Itunes all music plays and if I right click on a song and click show in folder I can see my full Itunes folder, so far I have done two system restores, scan disk, windows memory scan, defrag and tried ifixit. nothing has worked, I dont understand how I can see two different folders at the same address. Also have checked hidden files settings.

    Read the article

  • How to list my harddrives in OpenSolaris?

    - by Sanoj
    I have a machine with two harddrives. I have installed OpenSolaris on one of them and now I want to add the other one as a mirror-drive in my zpool. But to do that I have to know the name of my drive, something like c7d0s0. Using the command zpool status can I see the harddrives already in use in my zpool but not the hard-drives that are not in use. How can I list the names of the hard-drives that are not in use in any zpool or list the name of all my hard-drives?

    Read the article

  • Ripping a home video VCD on Linux or Windows with VLC or otherwise

    - by user259774
    I have a VCD with 22 minutes of video on it. I would like to retain this footage and throw away the VCD. I can play the whole thing with VLC ("open disc - vcd - /dev/sr0 - play"): all 22 minutes of the main track. I don't believe there's any other content aside from the main track. I can seek to anywhere I want to within the 22 minute track. If I mount /dev/sr0 /media/vcd and then try to copy the only file from the MPEGAV folder, I get an I/O error, with an empty destination file. VLC has a "convert" option in addition to "play". When I use this I actually get a good OGG file back, after it runs through the video in painful real-time. I guess it dubs it frame-by-frame. But the file is only 10 minutes long, leaving 12 minutes off of the track. Handbrake doesn't detect it's track titles, unfortunately. I don't know if I should start getting involved with GNU ddrescue or if it's because VCDs somehow encode their data sectors differently. Anyway, I'm in way over my head and if anyone knows how I could get that video track off the thing, feel free to share! Edit: I should note that I also have access to a Windows computer

    Read the article

  • eSATA hotswap using Jmicron JMB363 controller

    - by Stephen
    I have tried both IDE and AHCI modes in the BIOS. Also tried many different driver revisions. I can't seem to hot swap an external SATA drive. I can use the wizard to safely remove it, but reconnecting doesn't do anything unless I reboot. I use a thermaltake dock, and I would like to swap in my backup drive sometimes to do images (they take all day over USB). I can reboot, but I'd like to use hot swap. The controller is a Jmicron JMB363. I'm using the latest BIOS on my motherboard, as well.

    Read the article

  • OSX: cant create a partition because drive is locked

    - by Alain
    Problem: I have a USB key with Mountain Lion on it and I want to install it on my macbook pro. I deleted the existing partition on the laptop and wanted to created a new one were to install the OS but cant because everything in the partition tab for the drive is grayed out. Basically, I can't do anything until I unlock the partition So the question is: how to unlock a partition from disk utility or the command line.

    Read the article

  • External hard drive becomes unwriteable after awhile

    - by Brandon
    I have an external USB hard drive mounted in Ubuntu 9.10 with full read/write abilities over SMB. If it stays on for awhile though, I lose the ability to write to it. I end up having to ssh in and unmount, mount, reboot in order to have write ability again. Any reason on what might be causing this and how to fix it?

    Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >