Search Results

Search found 10810 results on 433 pages for 'port forwarding'.

Page 117/433 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• Improving TCP performance over a gigabit network lots of connections and high traffic for storage and streaming services

  - by Linux Guy

  I have two servers, Both servers hardware Specification are Processor : Dual Processor RAM : over 128 G.B Hard disk : SSD Hard disk Outging Traffic bandwidth : 3 Gbps network cards speed : 10 Gbps Server A : for Encoding videos Server B : for storage videos andstream videos over web interface like youtube The inbound bandwidth between two servers is 10Gbps , the outbound bandwidth internet bandwidth is 500Mpbs Both servers using public ip addresses in public and private network Both servers transfer and connection on nginx port , and the server B used for streaming media , like youtube stream videos Both servers in same network , when i do ping from Server A to Server B i got high time latency above 1.0ms , the time range time=52.7 ms to time=215.7 ms - This is the output of iftop utility 353Mb 707Mb 1.04Gb 1.38Gb 1.73Gb mqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqq server.example.com => ip.address 6.36Mb 4.31Mb 1.66Mb <= 158Kb 94.8Kb 35.1Kb server.example.com => ip.address 1.23Mb 4.28Mb 1.12Mb <= 17.1Kb 83.5Kb 21.9Kb server.example.com => ip.address 395Kb 3.89Mb 1.07Mb <= 6.09Kb 109Kb 28.6Kb server.example.com => ip.address 4.55Mb 3.83Mb 1.04Mb <= 55.6Kb 45.4Kb 13.0Kb server.example.com => ip.address 649Kb 3.38Mb 1.47Mb <= 9.00Kb 38.7Kb 16.7Kb server.example.com => ip.address 5.00Mb 3.32Mb 1.80Mb <= 65.7Kb 55.1Kb 29.4Kb server.example.com => ip.address 387Kb 3.13Mb 1.06Mb <= 18.4Kb 39.9Kb 15.0Kb server.example.com => ip.address 3.27Mb 3.11Mb 1.01Mb <= 81.2Kb 64.5Kb 20.9Kb server.example.com => ip.address 1.75Mb 3.08Mb 2.72Mb <= 16.6Kb 35.6Kb 32.5Kb server.example.com => ip.address 1.75Mb 2.90Mb 2.79Mb <= 22.4Kb 32.6Kb 35.6Kb server.example.com => ip.address 3.03Mb 2.78Mb 1.82Mb <= 26.6Kb 27.4Kb 20.2Kb server.example.com => ip.address 2.26Mb 2.66Mb 1.36Mb <= 51.7Kb 49.1Kb 24.4Kb server.example.com => ip.address 586Kb 2.50Mb 1.03Mb <= 4.17Kb 26.1Kb 10.7Kb server.example.com => ip.address 2.42Mb 2.49Mb 2.44Mb <= 31.6Kb 29.7Kb 29.9Kb server.example.com => ip.address 2.41Mb 2.46Mb 2.41Mb <= 26.4Kb 24.5Kb 23.8Kb server.example.com => ip.address 2.37Mb 2.39Mb 2.40Mb <= 28.9Kb 27.0Kb 28.5Kb server.example.com => ip.address 525Kb 2.20Mb 1.05Mb <= 7.03Kb 26.0Kb 12.8Kb qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq TX: cum: 102GB peak: 1.65Gb rates: 1.46Gb 1.44Gb 1.48Gb RX: 1.31GB 24.3Mb 19.5Mb 18.9Mb 20.0Mb TOTAL: 103GB 1.67Gb 1.48Gb 1.46Gb 1.50Gb I check the transfer speed using iperf utility From Server A to Server B # iperf -c 0.0.0.2 -p 8777 ------------------------------------------------------------ Client connecting to 0.0.0.2, TCP port 8777 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 3] local 0.0.0.1 port 38895 connected with 0.0.0.2 port 8777 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.8 sec 528 KBytes 399 Kbits/sec My Current Connections in Server B # netstat -an|grep ":8777"|awk '/tcp/ {print $6}'|sort -nr| uniq -c 2072 TIME_WAIT 28 SYN_RECV 1 LISTEN 189 LAST_ACK 139 FIN_WAIT2 373 FIN_WAIT1 3381 ESTABLISHED 34 CLOSING Server A Network Card Information Settings for eth0: Supported ports: [ TP ] Supported link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: external Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes Server B Network Card Information Settings for eth2: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes ifconfig server A eth0 Link encap:Ethernet HWaddr 00:25:90:ED:9E:AA inet addr:0.0.0.1 Bcast:0.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1202795665 errors:0 dropped:64334 overruns:0 frame:0 TX packets:2313161968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:893413096188 (832.0 GiB) TX bytes:3360949570454 (3.0 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2207544 errors:0 dropped:0 overruns:0 frame:0 TX packets:2207544 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:247769175 (236.2 MiB) TX bytes:247769175 (236.2 MiB) ifconfig Server B eth2 Link encap:Ethernet HWaddr 00:25:90:82:C4:FE inet addr:0.0.0.2 Bcast:0.0.0.2 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39973046980 errors:0 dropped:1828387600 overruns:0 frame:0 TX packets:69618752480 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3013976063688 (2.7 TiB) TX bytes:102250230803933 (92.9 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1049495 errors:0 dropped:0 overruns:0 frame:0 TX packets:1049495 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:129012422 (123.0 MiB) TX bytes:129012422 (123.0 MiB) Netstat -i on Server B # netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth2 9000 0 42098629968 0 2131223717 0 73698797854 0 0 0 BMRU lo 65536 0 1077908 0 0 0 1077908 0 0 0 LRU I Turn up send/receive buffers on the network card to 2048 and problem still persist I increase the MTU for server A and problem still persist and i increase the MTU for server B for better connectivity and transfer speed but it couldn't transfer at all The problem is : as you can see from iperf utility, the transfer speed from server A to server B slow when i restart network service in server B the transfer in server A at full speed, after 2 minutes , it's getting slow How could i troubleshoot slow speed issue and fix it in server B ? Notice : if there any other commands i should execute in servers for more information, so it might help resolve the problem , let me know in comments

  Read the article

• connect to ssh server thru 80 via HTTP proxy?

  - by im_chc

  Hi, Please help: I want to connect to my ssh server at home However, I'm behind a corporate (CORP) firewall, which blocks almost all ports (443, 22, 23 etc). But it seems that 80 is not blocked, coz I am able to surf the web after I login (i.e. IE sets to CORP's proxy server, and start IE - displayed CORP intranet portal - type in google.com - dialog pops up for userid + pwd - login successful, and surf without restrictions) My ssh server listens at 443. My question is: Is there a way to connect from a computer behind the CORP firewall to the ssh server thru the 80 port, with the ssh server still listening on port 443? Changing the ssh server to listen to port 80 is not an option, coz my home ISP blocks 80. Can I use a public proxy which listens at 80? After some research on google I found that there is something called "connect to SSH thru an HTTP proxy" using the Cockscrew software. Is it useful? Or is there some other way to solve the problem?

  Read the article

• Windows Firewall allows connection from any IP regardless of rule that only allow a specific IP

  - by Pierre-Alain Vigeant

  I have configured the Windows Firewall to Block (default) incoming connection on the public profile. I have created a rule for a port (in this case, this is Sql Server) that explicitly states that only my office static IP is allowed. If I test from my office, I am able to connect to the port. I was expecting that anybody outside the office would not be able to connect, but this is not the case. I asked a friend to telnet the port to see if it would reply and it does even if he's not on my network. I am a bit confuse here. Shouldn't it block everybody but the given IP? Is my server completely unsecured?

  Read the article

• Laptop windows 7 power settings - screen display goes black after 1 minute

  - by Puneet Dudeja

  My laptop windows 7 power settings are not working since last week, i have tried using "Dim display after 5 hours" and "Dim Never" also, but my screen goes black after 1 minute. Any resolutions ? My laptop model is : Compaq Pressario CQ62 Graphics Card Information: Name Intel(R) HD Graphics PNP Device ID PCI\VEN_8086&DEV_0046&SUBSYS_1425103C&REV_02\3&11583659&0&10 Adapter Type Intel(R) HD Graphics (Core i3), Intel Corporation compatible Adapter Description Intel(R) HD Graphics Adapter RAM 1.21 GB (1,303,306,240 bytes) Installed Drivers igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32 Driver Version 8.15.10.2119 INF File oem17.inf (iILKM0 section) Color Planes Not Available Color Table Entries 4294967296 Resolution 1366 x 768 x 59 hertz Bits/Pixel 32 Memory Address 0xD0000000-0xD03FFFFF Memory Address 0xC0000000-0xCFFFFFFF I/O Port 0x00004050-0x00004057 IRQ Channel IRQ 4294967294 I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\igdkmd64.sys (8.15.10.2119, 9.85 MB (10,326,784 bytes), 4/21/2010 6:18 PM) I am not able to solve my problem from any of the answers till now. The screen still goes dark and password screen appears after 1 minute of idle time.

  Read the article

• Nodejs for processing js and Nginx for handling everything else

  - by Kevin Parker

  I am having a nodejs running on port 8000 and nginx on port 80 on same server. I want Nginx to handle all the requests(image,css,etc) and forward js requests to nodejs server on port 8000. Is it possible to achieve this. i have configured nginx as reverse proxy but its forwarding every request to nodejs but i want nginx to process all except js. nginx/sites-enabled/default/ upstream nodejs { server localhost:8000; #nodejs } location / { proxy_pass http://192.168.2.21:8000; proxy_next_upstream error timeout invalid_header http_500 http_502 http_503 http_504; proxy_redirect off; proxy_buffering off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; }

  Read the article

• My server appears to have been hacked+ scanssh run by zabbix is it normal?

  - by Niro

  I'm running a few EC2/Scalr instances with zabbix monitoring. I received complaints about one of my servers port scanning other servers. the logs show it is accessing port 22 on consecutive IP addresses. I looked at the processes list and saw scanssh is running under the user Zabbix. My question is- Is scanssh part of zabbix? Is it suppesd to run? I have active autodiscovery on zabbix but it is looking at another IP addresses and definately not port 20. Is it possible that something in the config of zabbix agent is controlling it and not the settings on zabbix server? What can I do to find out if zabbix is somehow misbehaving or it is a hacker? Any advice is highly appreciated.

  Read the article

• How do I access an Ubuntu VirtualBox guest at a static IP from an OS X host?

  - by David Siegel

  How does one configure an Ubuntu guest to use a static IP that's visible to an OS X host, and ensure that the static IP is independent of the host's network configuration? I previously used bridged networking for my guest, but I'm constantly moving my host between networks so the guest IP is always different. First, I tried setting the guest network configuration to NAT and forwarding host port 1022 to guest port 22, so I could at least ssh to a fixed address (localhost:1022): $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/Protocol" "TCP" $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/GuestPort" 22 $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/HostPort" 1022 Then, $ ssh localhost -p 1022 ssh: connect to host localhost port 1022: Connection refused But this didn't work (guest has no network access with NAT and OS X refused the connection, as you can see). I'd love a general solution that would let me communicate with my guest at a fixed IP.

  Read the article

• On RouterOS, how will transparent proxying (with DNAT) affect reporting of netflows?

  - by Tim

  I have a box running Mikrotik RouterOS, which is set up to do transparent web proxying, as described here. In short, this means that I have a firewall rule for destination NAT causing any port 80 traffic to get redirected to port 8080 on the router, which is received by the Mikrotik local web proxy. The local web proxy then makes the web request on the client's behalf, in this case to a parent web proxy server (which in turn does the real web request). My question is, how will this two-part process get reported in the logging of traffic flow information (netflows)? Looking at the logged information, what I seem to be seeing is this: One flow recorded from client machine (private IP) to remote proxy (8080) Another flow recorded from router to remote proxy (8080) The original request that the client made to port 80 isn't recorded. I want to write code to analyse traffic usage, so I want to be sure I'm not losing information if I discard the latter of these.

  Read the article

• How can I connect to my Airport Extreme Shared Disk using Windows?

  - by matt ryan

  I have a shared disk attached to my Airport Extreme, which I can connect to remotely in OS X through the finder via command - k, and entering in the proper address: afp://test.dyndns.org:1111 1111 being the port I've reserved for the disk in the AE port mapping. This is such a great feature, but I don't always have access to a Mac. My question is how can I connect to this drive via Windows XP? Please note, that the shared drive is a Drobo FS and formatted to handle both Windows and Mac OS. I've tried mapping a network drive via My Computer - Tools - Map Network Drive and entering: \\test.dyndns.org:1111\Drobo-Name I've also tried Start - Run and entering the same, both with and without the port #.

  Read the article

• Machine account authentication on Radius server

  - by O.Shevchenko

  My workstation is under Linux. I have an Active Directory domain controller + Radius server on Windows 2008. I can verify user account 'radius-01' using 'radtest' tool: $ radtest -t pap radius-01 password123 195.234.133.32 1812 password123 Sending Access-Request of id 98 to 195.234.73.2 port 1812 User-Name = "radius-01" User-Password = "password123" NAS-IP-Address = 127.0.1.1 NAS-Port = 1812 rad_recv: Access-Accept packet from host 195.234.133.32 port 1812, id=98, length=84 Framed-MTU = 1344 Framed-Protocol = PPP Service-Type = Framed-User Class = 0x537004f00000013700010200ac1c0... I have joined my Linux PC to Active Directory domain ARB-HRK using Samba: [root@shev-arb]# net ads testjoin Join is OK I can dump machine password: [root@shev-arb]# tdbdump /var/lib/samba/private/secrets.tdb { key(34) = "SECRETS/MACHINE_PASSWORD/ARB-HRK" data(15) = "yGgXJsquRnpT0g\00" } How can i authenticate my machine account on Radius server? Do anybody know any tools for this, like: radtest shev-arb$ yGgXJsquRnpT0g 195.234.133.32 1812 password123 (this command fails)

  Read the article

• Cisco 1841 Box and Watchguard XTM21-W

  - by Corey

  I have never set one of these up before and need a little assistance. Right now we have a T1 line coming in from Sprint to a Cisco 1841 and then on to our router. However, when I plug the Cisco 1841 into Port 0 and the router into Port 3 it does not work. In Port 1 I have my management computer plugged in. We have one subnet and this must be easy but I cannot figure out how to make this work. When the firewall is plugged in then I get no internet or network access.

  Read the article

• Do I need to have a proxy server to have HTTP over SSH?

  - by Johnes thomas

  I want to use HTTP over SSH since in my university most of the sites are blocked. I have my own server to which I can using SSH. What I'm doing right now is have a squid proxy run on the server on a particular port. Then connect using putty to my server via ssh and create a tunnel from a certain local port (which I will enter as proxy server in Firefox) to the squid server. So in putty the configuration is like this for the tunnel: source port:8080 destination:localhost:3128 I want to know is there any other way other than running the squid proxy on my server to tunnel the packets? Thanks.

  Read the article

• No HTTP Response from Tomcat 7 EC2 instance

  - by David Kaczynski

  I am new to EC2 (and Tomcat, for that matter), and I am trying to deploy a vanilla Tomcat 7 server to an Ubuntu 12.04.1 EC2 instance and access the default test site over HTTP. My EC2 instance is running, and the Security Group includes port 80: My /etc/tomcat7/server.xml config has been edited to listen for HTTP requests on port 80: 0 I have restarted my Tomcat 7 server via sudo service tomcat7 restart. However, according to sudo netstat -lnp, Tomcat is not listed as listening over port 80: I am unable to get any response from going to the ...amazonaws.com public DNS in a web browser. What am I missing?

  Read the article

• Connecting to Google SMTP with Konica Minolta Printers

  - by VictorKilo

  I have spent the better portion of two days trying to get a number of Bizhub MFCs to connect to Google's SMTP service. Our company recently switched from an exchange server, which handled SMTP requests to Gmail. We have 20 branches each with different MFCs. I was able to get the Cannons connected, but the Konicas are giving me major problems. The three models that are giving me issues are the C203, C250 and the C280. I have used the following: smtp.gmail.com port 465 Gmail Username/Pass aspmx.l.google.com port 25 no authentication aspmx.l.google.com port 25 Gmail Username/Pass None of these methods are working despite the fact that all of those have worked on different makes/models. Any help would be greatly appreciated, I'm at my whit's end.

  Read the article

• Multiple email accounts from the same server in Emacs Gnus

  - by docgnome

  I'm trying to set up Gnus to use both my gmail accounts but I can only ever get one at a time to show up in the list of folders. (setq gnus-select-method '(nnimap "[email protected]" (nnimap-address "secure.emailsrvr.com") (nnimap-server-port 993) (nnimap-stream ssl))) (setq gnus-secondary-select-methods '((nnimap "[email protected]" (nnimap-address "imap.gmail.com") (nnimap-server-port 993) (nnimap-stream ssl)) (nnimap "[email protected]" (nnimap-address "imap.gmail.com") (nnimap-server-port 993) (nnimap-stream ssl)))) That is the relevant portions of my .gnus file. It prompts me for three username passwords on startup. After I enter all three, I can access my work account and the gmail account that I enter the creds for second. This is really annoying! Any ideas?

  Read the article

• Configure sendmail to accept connection from one other IP address

  - by Kumala

  I have a RubyOnRails application running on the same server that runs sendmail. The application sends out (no need to receive) emails via the local sendmail. Now I intend to move sendmail to a dedicated server. How do I make sendmail on that server accept connections from my application on the other server? I modified sendmail.mc from DAEMON_OPTIONS(`Family=inet, Name=MTA-v4, Port=smtp, Addr=127.0.0.1')dnl to DAEMON_OPTIONS(`Family=inet, Name=MTA-v4, Port=smtp')dnl I have also added to /etc/mail/access: Connect:198.211.117.41 RELAY then ran m4 sendmail.mc > sendmail.cf and restarted sendmail. Trying to connect from my app server with telnet on port 25 to the mail server gives me: telnet: Unable to connect to remote host: Connection refused Am I missing something?

  Read the article

• NAT rules betweek 2 network interfaces (with iptables)

  - by Simone Falcini

  this is the current network that I have: UBUNTU: eth0: ip: 212.83.10.10 bcast: 212.83.10.10 netmask 255.255.255.255 gateway 62.x.x.x eth1: ip: 192.168.1.1 bcast: 192.168.1.255 netmask: 255.255.255.0 gateway ? CENTOS: eth0: ip: 192.168.1.2 bcast: 192.168.1.255 netmask 255.255.255.0 gateway 192.168.1.1 I basically want this: Make specific NAT rules from the internet to specific internal servers depending on the port: Connections incoming to port 80 must be redirected to 192.168.1.2:80 Connections incoming to port 3306 must be redirected to 192.168.1.3:3306 and so on... I also need one NAT rule to allow the servers in the subnet 192.168.1.x to browse the internet. I need to route the requests on eth0 to eth1 to be able to exit to internet. Can I do this on the UBUNTU machine with iptables? Thanks!

  Read the article

• How to use public-key ssh authentication

  - by Poma

  I have 2 ubuntu 12.04 (beta) servers (node1 and node2) and want to establish passwordless root access between them. Other users should not have access to other boxes. Also note that ssh default port is changed to 220. Here's what I did: sudo -i cd /root/.ssh ssh-keygen -t rsa # with default name and empty password cat id_rsa.pub > authorized_keys then copied id_rsa & id_rsa.pub to node2 and added id_rsa.pub to authorized_keys. Both hosts have the same /root/.ssh/config file: Host node1 Hostname 1.2.3.4 Port 220 IdentityFile /root/.ssh/id_rsa Host node2 Hostname 5.6.7.8 Port 220 IdentityFile /root/.ssh/id_rsa Now the problem is that when I type ssh node2 it asks me for password. What may be the problem?

  Read the article

• Can't reach custom C# forms application remotely.

  - by gnucom

  Hello, I'm working in Windows Server 2008. I have a very basic C# forms application (not a service) that is listening on a port, say 56112. When using telnet I can connect from the localhost and send and receive data. For some reason I cannot remotely connect to the application. I know I have a connection because I can telnet to 23 on the remotely fine. I've opened this port on the firewall, created rules in/out in advanced firewall, disabled the firewall completely, and more. Any suggestions would be great! This is the telnet output: Microsoft Telnet> open server.cc 56112 Connecting server.cc...Could not open connection to the host, on port 56112: Connect failed

  Read the article

• Problem connecting to MySQL with zend

  - by wheresrhys

  I've set up a virtual host on my local machine (windows xp with xampp installed), have installed zend there and am now trying to connect to the MySQLdatabase. I get the following error message: Message: SQLSTATE[HY000] [2003] Can't connect to MySQL server on ''myhost.com'' (10060) All the tips I've found via google haven't helped. I use kaspersky antivirus and have added port 3306 to the allowed list for MySQL and Apache. I've also pinged myhost.com:3306 and get a response (with ip address 67.63.50.51), though localhost:3306 and 127.0.0.1:3306 aren't found. I've checked that other apps can still access MySQL if the virtual host is pointed at them instead and my non zend apps do work. I guess I have to do something further to the port, or maybe force the app to use a different port, but am not sure how to do either. Any help appreciated.

  Read the article

• nagios: trouble using check_smtps command

  - by ethrbunny

  I'm trying to use this command to check on port 587 for my postfix server. Using nmap -P0 mail.server.com I see this: Starting Nmap 5.51 ( http://nmap.org ) at 2013-11-04 05:01 PST Nmap scan report for mail.server.com (xx.xx.xx.xx) Host is up (0.0016s latency). rDNS record for xx.xx.xx.xx: another.server.com Not shown: 990 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 110/tcp open pop3 111/tcp open rpcbind 143/tcp open imap 465/tcp open smtps 587/tcp open submission 993/tcp open imaps 995/tcp open pop3s 5666/tcp open nrpe So I know the relevant ports for smtps (465 or 587) are open. When I use openssl s_client -connect mail.server.com:587 -starttls smtp I get a connection with all the various SSL info. (Same for port 465). But when I try libexec/check_ssmtp -H mail.server.com -p587 I get: CRITICAL - Cannot make SSL connection. 140200102082408:error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol:s23_clnt.c:699: What am I doing wrong?

  Read the article

• Cannot start Xampp on server with IIS

  - by Vafello

  I am running a Windows Server 2003 with IIS and I am trying to install XAMPP in order to be able to run php and mysql based pages. I tried to install php on IIS, but it is too complicated and time consuming for me. I am able to run asp on localhost/ and I would like to run php websites on different port, say localhost:81/. After installing xampp and changing the port in httpd.conf file to 81 I try to turn on apache, but it turns off after about 5 seconds. Mysql works fine. It seems that there is a port clash, but I do not know how to change the ports and turn the apache permanently. Any advice appreciated. (I know it is more a server fault question, however I posted it there as well and did not get any reply, so I decided to try here)

  Read the article

• tcpview cannot kill connection/process

  - by Stig

  I have a program that sometime misses to close a tcp connection. After the program has ended I can see that the port is taken. TCPViewer shows "non-existent" in the "Process" column. If i try to "End process" or "Close connection" nothing happens. If i reboot the server the port is released. But how can I tell Windows to release this port without a reboot? SOLUTION: It was dw20.exe (Microsoft Error Reporting) that was holding it back.

  Read the article

• Debugging an IP Camera

  - by Kevin Boyd

  Further to my previous question on ServerFault here, I finally can view the stream on RTSP however I still cannot view the camera stream in a web browser. The IP camera uses an activeX control in Internet Explorer. And although I can configure the camera settings from IE, I cannot view the stream it shows connecting for a few sec and shows disconnecting. I have forwarded the HTTP, RTSP and Stream ports of the IP camera. the public port is 7071 and private port is 7070. When I try to see the connections in TCPView it shows that the ActiveX control in IE is trying to connect to port 7070 which is quite unusual since it should connect to 7071 Also the state shows SYN_SENT for sometime and then disconnects. I have really no clue what's going on and why?

  Read the article

• Windows Server 2008: Limit UDP/TCP packets per IP or ban

  - by WBAR

  How I can limit UDP/TCP packets per IP send to my host (or better PORT) per second or minute ? Would be nice to ban that IP for 12/24 hours or even for ever. I got Windows Server 2008 and I'm very poor in Windows administration but quite good in Linux. EDIT: By basic problem is that They sending a lot of rubbish UPD and TCP packets.. TCP packets without SYNCH, fragmented UDP packets so my servers stop responding.. So I need to cut off users (IPs) sending more than X packets per second. I need solution witch provides me, somehow, configurable: X packets of certain type (UDP, TCP or both - lets say parameter named Z ) are allowed to be received by IP on Y port, otherwise this packet should be DROPPED. My virtual hosts are hosted by VirtualBox and I'm able to forward all incoming packets certain type and certain port to the specific Virtual Host, but I need to DROP them before my VirtualBox receive them.

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >