Search Results

Search found 48664 results on 1947 pages for 'internet access'.

Page 118/1947 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125 | Next Page >

Internet doesn't work when enable local network

- by rakesh yadav

We have the following network setup: A) Router IP 192.168.51.49 B) Windows Server 2008 R2 with dual NIC: Lan A) WAN interface (192.168.51.50) ( Used for internet) Lan B) LAN interface (192.168.30.228) ( used for local connectivity ) When I keep both LAN Enabled than my internet doesn't work, but if I disable my local LAN then internet works fine. How can I resolve this issue? Do I need to do routing on my server Please find the below attached route print result C:\Users\Administrator>route print =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.51.49 192.168.51.50 276 0.0.0.0 0.0.0.0 192.168.30.227 192.168.30.228 266 192.168.30.224 255.255.255.240 On-link 192.168.30.228 266 192.168.30.228 255.255.255.255 On-link 192.168.30.228 266 192.168.30.239 255.255.255.255 On-link 192.168.30.228 266 192.168.51.48 255.255.255.240 On-link 192.168.51.50 276 192.168.51.50 255.255.255.255 On-link 192.168.51.50 276 192.168.51.63 255.255.255.255 On-link 192.168.51.50 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 202.56.230.5 255.255.255.255 192.168.51.49 192.168.51.50 21 202.56.230.6 255.255.255.255 192.168.51.49 192.168.51.50 21 192.168.26.124 255.255.255.255 192.168.51.49 192.168.51.50 21 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.51.50 276 224.0.0.0 240.0.0.0 On-link 192.168.30.228 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.51.50 276 255.255.255.255 255.255.255.255 On-link 192.168.30.228 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.30.227 Default 0.0.0.0 0.0.0.0 192.168.51.49 Default ===========================================================================

Read the article
Very strange networking problem in all computers in my house

- by Anthony

I have three computers in my house: One desktop (wired), and two laptops (wireless). I'm using Cox Communications (yes they suck), and yesterday they had a major outage. I know it was them because I called them up when I started losing connection to the internet. All the computers can connect just fine, but they don't have internet access. It just says "local only". The weird thing is, some of them work occasionally. For the first day my laptop was working perfectly, while all the other computers couldn't connect. Later on in the day it got reversed, and the desktop was the one with internet access. By the second day the problem on Cox's end was fixed, but we still had no access. I called them up and they reset my modem, and did the usual troubleshooting stuff. It never fixed the problem, but we found out that the problem had to do with conflicting IP addresses. My router was a Linksys WRT54G and it was about 5 years old. I figured it might have gotten damaged from the outage since it was so old, and now it's having trouble "fixing itself" and giving out the proper IP addresses. So I bought a new router, a Cisco Linksys E1000. I set everything up, and still the same problem. My computer has access right now (that's how I'm writing this), but no other computers seem to be able to get access. Is there possible damage to the modem? Can someone help me please? Sorry for this being so long.

Read the article
Filesystem access through web interface

- by Jorge Suárez de Lis

I have an SSH+Samba server so people can access its files from anywhere on the network. I thought it would be also interesting to provide access through a web interface, so they can access the files even when they don't have access to the VPN or a Samba/SSH client. Something like the Ubuntu One or Dropbox web interface. The http server could be on the same machine as the SSH+Samba, so it should just provide access to local files and some way to login with their username/password. Someone knows any software like this?

Read the article
Recommendations for colocation in the US

- by Emil

Hello serverfault I work for a European media company and we are currently looking for colocation in the US. I know the European market quite well unfortunately that is not the case for the US. I'm hoping for you guys to help me out a bit with a few questions, it would be much appreciated! I am looking for a data center that can deliver a high level of availability (tier 3 or better). The installation will be fairly large so capacity is important. Good internet connectivity/carrier presence. However most important is good customer support, skilled dedicated and responsive technical staff, since we won't have tech staff close by. I'm looking for a small and fast moving company that target internet businesses rather than big old enterprise hosting. What locations should we go for given that we want to reach all of the US from a single site and still maintain decent latency? (do we need east and west coast?) Where are the main internet hubs and should you try and get as close as possible? Are there any good online resources I should look at? Where do the large scale internet/media services colocate? Lastly I would be very happy to get some actual recommendations for companies to talk to P.S I'm happy to return the favor if anyone has question regarding data centers and colocation in Europe.

Read the article
Internet doesn't work when enable local Lan

- by rakesh yadav

We have the following network setup: A) Router IP 192.168.51.49 B) Windows Server 2008 R2 with dual NIC: B1) WAN interface (192.168.0.2) ( Used for internet) B2) LAN interface (192.168.1.2) ( used for local connectivity) when i keep both LAN Enabled than my internet doesn't work, but if I disabled my local Lan than internet working fine. so please help me how can resolved this issue or should i need to do routing on my server Please find the below attached route print result C:\Users\Administrator>route print =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.51.49 192.168.51.50 276 0.0.0.0 0.0.0.0 192.168.30.227 192.168.30.228 266 192.168.30.224 255.255.255.240 On-link 192.168.30.228 266 192.168.30.228 255.255.255.255 On-link 192.168.30.228 266 192.168.30.239 255.255.255.255 On-link 192.168.30.228 266 192.168.51.48 255.255.255.240 On-link 192.168.51.50 276 192.168.51.50 255.255.255.255 On-link 192.168.51.50 276 192.168.51.63 255.255.255.255 On-link 192.168.51.50 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 202.56.230.5 255.255.255.255 192.168.51.49 192.168.51.50 21 202.56.230.6 255.255.255.255 192.168.51.49 192.168.51.50 21 192.168.26.124 255.255.255.255 192.168.51.49 192.168.51.50 21 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.51.50 276 224.0.0.0 240.0.0.0 On-link 192.168.30.228 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.51.50 276 255.255.255.255 255.255.255.255 On-link 192.168.30.228 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.30.227 Default 0.0.0.0 0.0.0.0 192.168.51.49 Default ===========================================================================

Read the article
Cannot start `Routing and Remote Access Service` and it's dependencies

- by ahmadali shafiee

I tried to start Routing and Remote Access Service but I've got an error says the dependency service or group failed to start then I tried to start Remote Access Connection Manager (one of RRAS's dependencies) and the error way same. then I tried to start The Secure Socket Tuning Protocol Service but there was an error says that the the service started then stopped! the errors form event log is here: The Remote Access Connection Manager service depends on the Secure Socket Tunneling Protocol Service service which failed to start because of the following error: The operation completed successfully. The Secure Socket Tunneling Protocol Service service entered the stopped state. The Routing and Remote Access service depends on the Remote Access Connection Manager service which failed to start because of the following error: The dependency service or group failed to start. sort by date Does anyone know how can I resolve the problem?

Read the article
SharePoint site access request denied permissions

- by Nat

Here is a good catch-22. When a user without any permissions on a site requests access from the _layouts/AccessDenied.aspx page it takes them to the Request Access page (_layouts/ecm_reqacc.aspx). When the user fills out the form with a simple message it is supposed to send an email to the address specified in the site collection and take them to _layouts/confirmation.aspx. Unfortunately the users are getting another access denied error instead. I have tried going to _layouts/accessdenied.aspx on a site I am the administrator of and the email is sent fine, so it is not a problem with sending the emails. What should I check and/or give access to in order for authenticated, but not permissioned users the ability to send access requests?

Read the article
Connecting to local Sql server 2005 through Internet

- by Manish

Hello My Sql server is on Local Machine, I want to access it through Internet. I Configure Surace manager and Configuration manager of sqlserver 2005 for remote access. My sqlserver is running on port:1433 I am using port forwarding , I can access service of other ports, My Connetion String Is: Data Source=190.190.200.100,1433;Network Library=DBMSSOCN;Initial Catalog=myDataBase;User ID=myUsername;Password=myPassword; But it gives following error when i am trying to connect sql server through internet: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)

Read the article
Private IP getting routed over Internet

- by WernerCD

We are setting up an internal program, on an internal server that uses the private 172.30.x.x subnet... when we ping the address 172.30.138.2, it routes across the internet: C:\>tracert 172.30.138.2 Tracing route to 172.30.138.2 over a maximum of 30 hops 1 6 ms 1 ms 1 ms xxxx.xxxxxxxxxxxxxxx.org [192.168.28.1] 2 * * * Request timed out. 3 12 ms 13 ms 9 ms xxxxxxxxxxx.xxxxxx.xx.xxx.xxxxxxx.net [68.85.xx.xx] 4 15 ms 11 ms 55 ms te-7-3-ar01.salisbury.md.bad.comcast.net [68.87.xx.xx] 5 13 ms 14 ms 18 ms xe-11-0-3-0-ar04.capitolhghts.md.bad.comcast.net [68.85.xx.xx] 6 19 ms 18 ms 14 ms te-1-0-0-4-cr01.denver.co.ibone.comcast.net [68.86.xx.xx] 7 28 ms 30 ms 30 ms pos-4-12-0-0-cr01.atlanta.ga.ibone.comcast.net [68.86.xx.xx] 8 30 ms 43 ms 30 ms 68.86.xx.xx 9 30 ms 29 ms 31 ms 172.30.138.2 Trace complete. This has a number of us confused. If we had a VPN setup, it wouldn't show up as being routed across the internet. If it hit an internet server, Private IP's (such as 192.168) shouldn't get routed. What would let a private IP address get routed across servers? would the fact that it's all comcast mean that they have their routers setup wrong?

Read the article
Can't access shared drive when connecting over VPN

- by evolvd

I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

Read the article
Vyatta internet connection + hosted site on same IP

- by boburob

Having a small issue setting up a vyatta. The company internet and two different websites are both on the same IP. Server 1 - Has websites hosted on ports 1000 and 3000 and also has a proxy server installed to provide internet connection to the domain Server 2 - Has a website hosted on ports 80 and 433 The vyatta is correctly natting the appropriate traffic to each server, and allowing the proxy to get internet traffic, however I have a problem getting to the websites hosted on these two servers inside the domain. I believe the problem is that the HTTP request is being sent with an IP, eg: 12.34.56.78. The request will reach the website and the server will attempt to send the request back to the IP, however this is the IP of the Vyatta, so it has nowhere else to go. I thought the solution would be something like this: rule 50 { destination { address 12.34.56.78 port 1000 } inbound-interface eth1 inside-address { address 10.19.2.3 } protocol tcp type destination } But this doesnt seem to do it! UPDATE I changed the rules to the following: rule 50 { destination { address 12.34.56.78 port 443 } outbound-interface eth1 protocol tcp source { address 10.19.2.3 } type masquerade } rule 51 { destination { address 12.34.56.78 port 443 } inbound-interface eth1 inside-address { address 10.19.2.2 } protocol tcp type destination } I am now seeing traffic going between the two with Wireshark, but the website will still fail to load.

Read the article
Our GoDaddy web server is drowning in temp files!!

- by temp file guy

We have a virtual dedicated server with a fairly large amount of traffic. We use GoDaddy using CPanel. We have 10GIG of space of which about 80% is not our content but logs and server utilities. Godaddy support is evasive and they are trying to encourage us to migrate to new service with 15GIG. Reviewing the large files we found the following: We have a ton old TMP files at this directory. /public_html/files/TMP/FILE_PERSISTANCE_PROVIDER: (no access) some large files in these directories. /usr/local/apache/logs/ - suphp_log (220M) - access_log (7M) - error_log (5M) /usr/local/apache/domlogs/ (no access) /usr/local/cpanel/ (no access) /usr/local/cpanel-rollback /tmp Questions: What can we safely delete or truncate? How can we change permissions on files with no access to delete? Is there utility to monitor and clean up temp files Other files/programs that we can delete? thanks!

Read the article
how to restrict wampserver access to certain ip addresses

- by user28233

What do I need to do in order to restrict the access to my wamp server to certain ip addresses. Just imagine that the my ip address is the ip address that I only want to have access I tried to edit the .htaccess # This folder does not require access over HTTP # (the following directive denies access by default) Order allow,deny Allow from 112.203.229.44 and the phpmyadmin.conf: Alias /phpmyadmin "E:/wamp/apps/phpmyadmin3.2.0.1/" # to give access to phpmyadmin from outside # replace the lines # # Order Deny,Allow # Deny from all # Allow from my ip address # # by # # Order Allow,Deny # Allow from my ip address # <Directory "E:/wamp/apps/phpmyadmin3.2.0.1/"> Options Indexes FollowSymLinks MultiViews AllowOverride all Order Deny,Allow Deny from all Allow from my ip address </Directory>

Read the article
Cannot access to any Windows share including localhost

- by user21936

I can't access any share from my operating system, including \\localhost and \\127.0.0.1. I have Windows 7. NetBIOS over IP is enabled, other computers in the network can access my shares and other computer's shares, but my operating system cannot access any share. I have installed Windows XP within VMware, and the virtual Windows XP can access all shares including the host shares. I can communicate in other ways like TCP, HTTP and gaming, but not access shares. How to solve this problem?

Read the article
SSH Access Denied despite correct credentials being used

- by columbo

Hello, I have a remote CentOS server to which I had SSH access to. Today when I try to log in via SSH I just get Access Denied even though I am using the correct credentials. I have plesk 9 access and so have reset the admin password and tried to SSH using that password but to no avail. I even created a new user with SSH access rights and tried to log in as them but again failed with the same access denied. I have rebooted. Can anyone offer any advice? There is no file manager in plesk other than for the web domains so I can't get at any system files to see what is going on. Any advice appreciated.

Read the article
Unable to access internet if wireless enabled

- by balki

The following is my route output. eth0 is my wired network and eth1 is my wireless network. Only wired one has access to internet. If I enable wireless, I am not able to access internet, it tries to access via eth1 and I get 404 page of the wireless router. Why does eth1 have higher preference though default is eth0 (link)? [balakrishnan@mylap ~]$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.26.0.1 0.0.0.0 UG 0 0 0 eth0 10.26.0.0 * 255.255.192.0 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 192.168.1.0 * 255.255.255.0 U 9 0 0 eth1

Read the article
Motorola Surfboard SB6121 modem conected to 2WIREi38HG wireless router but there's no internet access

- by Jessica

I have just switched to Comcast cable internet from AT&T Uverse and I was hoping to use the 2WIRE wireless router with the new Surfboard modem so I can have wireless access. I messed around with some settings and got it working for my laptop (I'm not terribly well versed in computer stuff; I think it was mostly luck) for about a week. The other day I tried to get online and there was no internet connection. I restarted the equipment with no success and then plugged the modem directly into the laptop. This worked, so I knew there was no outage. I connected the ethernet cord to the router and a second cord to my laptop and that worked, too. But when I tried again just with the wireless the laptop connects to the router, but doesn't recognize it or find an internet connection. I tried to go to http://gateway.2Wire.net to fiddle with the settings, but all I get is a Server Not Found page. I tried to check the ip address but this is really kind of over my head and I get different things checking it while plugged into only the modem vs when I plug into the router. Can anyone help? The frustrating thing is that I had it working for awhile, so I know it can do it!

Read the article
Cannot access to any windows share including localhost

- by user21936

I can't access any share from my operating system, including \\localhost and \\127.0.0.1. I have Windows 7. NetBIOS over IP is enabled, other computers in the network can access my shares and other computer's shares, but my operating system cannot access any share. I have installed Windows XP within VMware, and the virtual windows xp can access all shares including the host shares. I can communicate in other ways like TCP, HTTP and gaming, but not access shares. How to solve this problem?

Read the article
windows 7 clock jumps back about every hour + internet disconnects

- by IlyaD

I have the weirdest problem, for the last few days every hour or so (not exact) the clock jumps about back in jumps of 15 to 60 minutes and after some time the internet disconnects. i can reconnect the internet by unplugging and plugging back the network cable. This is the second time this problem happens to me, the first time was when I installed VirtualBox. whaen I removed it the problem was gone. This time I have no idea what triggered it, the only thing I installed about the time the problem started was iTunes update (10.5.1) I tried removing it but the problem remained. (also tried to remove other programs i installed day or 2 before and it also didn't help) also, this is not a VM and currently I don't have any VM software. any ideas..? UPDATE since the solution is in the comments i'll write it here - apparently the windows time service got broken, this is the fix: http://technet.microsoft.com/en-us/library/cc738995(WS.10).aspx (run "fix it" from IE browser only) UPDATE 2 The fix didn't work, about 2 hours passed and first the internet disconnected and then the clock jumped back... This probably means that the problem is not only in the clock

Read the article
Blacklist a single access point of a wireless network

- by Zr40

At my university, one of the wireless access points is failing. When something tries to associate to the network using that access point, it deassociates the client, claiming 802.1X authentication failure. Other access points do work normally using the same credentials. The issue has been reported, but after a month it still has still not been fixed. Now, I'm looking for a way to blacklist the access point's BSSID, so the OS prefers other access points on the same SSID. How can I blacklist specific BSSIDs in either Mac OS X Snow Leopard or Windows 7?

Read the article
Sharing VPN access between two computers on the LAN

- by Axelle Ziegler

I have VPN access to several machines in my office from my home machine. I'd like to be able to access those machines from another computer on my LAN, without setuping a second VPN access. Both computers are Windows 7 machines. Is there a way for my "main" computer to share its VPN access to another machine on the LAN? How would one setup this share? I don't think "simple" Internet connection sharing fits my needs because: My LAN already has its own DHCP/Router to access the Internet, and I'd like to keep it this way I can't access the Internet through my VPN connection

Read the article
Configure Virtualbox guest with static IP, SSH and internet access from host

- by koskoz

I have an Ubuntu Server 12 virtualbox guest running on a Windows 7 host which has a dynamic IP (and I don't wanna change this considering it's a laptop and I'm changing network frenquently). I want to have a static IP for my VM and a SSH access from my host but I still want to have the internet access on my VM. I tried added a second host only adapter and configured /etc/network/interface to set eth1 to a static ip, but I can't connect via SSH to it. Setting only adapter1 to host only works for SSH and static IP but I lose the internet access.

Read the article
Odd one: IE6 showing the "view source" command enabled when I was expecting it to be disabled.

- by caerphilly

Hi, OK, I admit this problem is odd. I'm just trying to understand why IE is behaving the way it is. I realise that logic may not apply here :) I have Internet Explorer 6 (Sp1) running on Windows 2000. The IE option "Do not store encrypted pages to disk" is checked (enabled). The temporary internet files folder is empty. TEMP and TMP environment variables are set to valid folders. I'm connected to a web server over SSL. The web server is serving a page over SSL with the HTTP cache-control header set to "no-cache, no-store". I was expecting the "view source" command to be greyed out in this circumstance (as it is on another machine). But it works. When I "view source", I get an entry in the Temporary Internet Files folder with an "internet address" property of "view-source:https://myserver/...." and the content of the page. I wasn't expecting that. I can't understand why one machine is different to another in this regard. Obviously there is some environment/setup difference, but I can't track it down. Anyone have any bright ideas?

Read the article
Store and Encrypt data over the internet.

- by sotsec

I am trying to build a system where I will be able to access my files remotely. I want to setup an external hard drive or a NAS that I will access over the internet, and I want every file that is stored on that system to be encrypted. Could you please suggest me what is the best way of doing that? Or if you have any knowledge, what is the best way to access your files remotely with maximum safety? but the same time the space that the files are allocated is protected against theft(encryption) etc. thank you

Read the article
Create a wifi hotspot in a place where an authentication is required [closed]

- by SoftTimur

I live in a residence where Internet is provided via cable. Once the computer is connected to the cable, launching a browser will trigger an authentication, I have a username and password to enter, then the internet will be connected. With a gateway (e.g. Wireless Cable Voice Gateway Model CBVG834G) and 2 cables, two PCs can connect to the Internet with my account at the same time. Now the question is, I don't like the cable, and would like to create a wifi hotspot. It seems realizable with the same gateway. According to the instruction on page 2-4 of the manual: Enter http://192.168.0.1 in the address field of your Internet browser. Log in to the gateway with either of the default user names, MSO or admin... However, trying to open 192.168.0.1 gives me an error on the browser. Does anyone know what happened? Is it due to the authentication required by my residence? Is there any other way to build a hotspot of wifi? PS: My system is MAC OS

Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125 | Next Page >