Search Results

Search found 3942 results on 158 pages for 'logged'.

Page 118/158 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

• vyatta Server Reboots by itself

  - by Fernando

  I have an issue regarding some hardware, maybe you can help me. First, I set up a Supermicro Superserver SYS-5016I-NTF with a Intel Xeon X3470 and 4 GB of Ram with a Hotlava Card Tambora 64G4 with Intel Chipset 82599EB and 4x10G SPF+ ports. Installed Vyatta community edition 6.3. I used it as router making BGP connections with 2 operators. No load at all, temp ranges normal. But the issue is that it reboots by itself in a ramdom way. Not very often, once every few days. But it is unacceptable for production purposes. So I try to test on different hardware, and installed Vyatta community edition 6.3 on a Dell PowerEdge 2950, with Xeon(R) E5345 @ 2.33GHz and 4 GB of Ram. Same Vyatta configuration as Supermicro Server. With same hotlava Card model ( I bought two of them ) Well I have reboots with this equipment as well. Same frecuency as above. I have checked syslog no strange logs until boot process starts to be logged. So it seems server reboot suddenly. I have installed latest driver for the chipset of the Hotlava card. Servers are placed in a datacenter with UPS So finally two things in common in both servers: Hotlava Card. Someone with issues with this card, or the chipset?? Could be it this card?? Vyatta 6.3 community edition. I don't thing is the problem. Is a regular Debian with packages to glue together different services. Or maybe is something I am missing. Andy ideas, suggestions?? Thank you very much... Fernando

  Read the article

• IIS 7.0 - responses throttled to 500ms blocks?

  - by Julia Hayward

  Scenario: ASP.NET MVC wep app sitting on my local machine (Vista Ultimate, IIS 7.0), nothing going on except one user (me) logged in and viewing an index page. The page includes 9 dynamic images drawn from the underlying DB and returned from a controller action. I have got the actual processing time for these images down to 15ms each. Turn on Firebug and watch the page load. What I see is 9 requests for images firing off together – no surprise – but four come back to me almost immediately; two more after 0.5s; another after 1s; then at 1.5s and 2s. Logging on the server side suggests the individual responses are still only taking 15ms. So it appears IIS is queueing things up into 500ms chunks. (Repeating the experiment produces different results, but each time the images return in similar blocks – you might get three in the first group, then three at 0.5s, two at 1s etc, for example – and it’s always at 500ms intervals, not anything else.) It’s also repeatable cross-browser, and it’s not repeatable with other forms of content. I haven't found any particular mention of this problem out there, so I'm sort of assuming it's not an IIS bug, so is it: i) IIS on desktop OSs deliberately does it, to make you use server OSs in production? ii) There is some magical setting that has eluded me for as long as I’ve known IIS? iii) Something peculiar to MVC or SQL Server 2008? or something else?

  Read the article

• Some process does ICMP port scan on my OSX box and I am afraid my Mac got a virus

  - by Jamgold

  I noticed that my 10.6.6 box has some process send out ICMP messages to "random" hosts, which concerns me a lot. when doing a tcpdump icmp I see a lot of the following 15:41:14.738328 IP macpro > bzq-109-66-184-49.red.bezeqint.net: ICMP macpro udp port websm unreachable, length 36 15:41:15.110381 IP macpro > 99-110-211-191.lightspeed.sntcca.sbcglobal.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:23.458831 IP macpro > 188.122.242.115: ICMP macpro udp port websm unreachable, length 36 15:41:23.638731 IP macpro > 61.85-200-21.bkkb.no: ICMP macpro udp port websm unreachable, length 36 15:41:27.329981 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:29.349586 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 I got suspicious when my router notified me about a lot of ICMP messages that don't get a response Does anyone know how to trace which process (or worse kernel module) might be responsible for this? I rebooted and logged in with a virgin user account and tcpdump showed the same results. Any dtrace magic welcome. Thanks in advance

  Read the article

• Some process does ICMP port scan on my OSX box and I am afraid my Mac got a virus

  - by Jamgold

  I noticed that my 10.6.6 box has some process send out ICMP messages to "random" hosts, which concerns me a lot. when doing a tcpdump icmp I see a lot of the following 15:41:14.738328 IP macpro > bzq-109-66-184-49.red.bezeqint.net: ICMP macpro udp port websm unreachable, length 36 15:41:15.110381 IP macpro > 99-110-211-191.lightspeed.sntcca.sbcglobal.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:23.458831 IP macpro > 188.122.242.115: ICMP macpro udp port websm unreachable, length 36 15:41:23.638731 IP macpro > 61.85-200-21.bkkb.no: ICMP macpro udp port websm unreachable, length 36 15:41:27.329981 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:29.349586 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 I got suspicious when my router notified me about a lot of ICMP messages that don't get a response [INFO] Mon Jan 10 16:31:47 2011 Blocked outgoing ICMP packet (ICMP type 3) from 192.168.1.189 to 212.25.57.90 Does anyone know how to trace which process (or worse kernel module) might be responsible for this? I rebooted and logged in with a virgin user account and tcpdump showed the same results. Any dtrace magic welcome. Thanks in advance

  Read the article

• Facing application redirection issue on nginx+tomcat

  - by Sunny Thakur

  I am facing a strange issue on application which is deployed on tomcat and nginx is using in front of tomcat to access the application from browser. The issue is, i deployed the application on tomcat and now setup the virtual host on nginx under conf.d directory [File i created is virtual.conf] and below is the content i am using for the same. server { listen 81; server_name domain.com; error_log /var/log/nginx/domain-admin-error.log; location / { proxy_pass http://localhost:100; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } Now the issue is this when i am using rewrite ^(.*) http://$server_name$1 permanent; in server section and access the URL then this redirects to https://domain.com and i am able to log in to app and able to access the links also [I am not using ssl redirection in this host file and i don't know why this is happening] Now when i removed this from server section then i am able to access the application from :81 and able to logged into the application but when i click on any link in app this redirect me to the login page. I am not getting any logs in application logs as well as tomcat logs. Please help on this if this is a redirection issue of nginx. Thanks, Sunny

  Read the article

• with nginx having the base url rewrite to https

  - by jchysk

  I'd like only my base domain www.domain.com to be rewritten to https://www.domain.com By default in my https block I have it reroute to http:// if it's not ~uri = "/" (base domain) or static content. server { listen 443; set $ssltoggle 2; if ($uri ~ ^/(img|js|css|static)/) { set $ssltoggle 1; } if ($uri = '/') { set $ssltoggle 1; } if ($ssltoggle != 1) { rewrite ^(.*)$ http://$server_name$1 permanent; } } So in my http block I need to do the rewrite if it has to https: server { listen 80; if ($uri = '/') { set $ssltoggle 1; } if ($ssltoggle = 1) { rewrite ^(.*)$ https://$server_name$1 permanent; } } If I don't have the $uri = '/' if-statement in the http block, then https works fine if I go directly to it, but I won't get redirected if I go to regular http which is expected. If I do put that in-statement in the http block then everything stops working within minutes. It might work for a few requests, but will always stop within a minute or so. In browsers I just get a blank page for all requests. If I restart nginx it continues to not work until I remove both if-statement blocks in both the https and http blocks and restart nginx. When I look in the error logs I don't see anything logged. When I look in the access log I see this message: "-" 400 0 "-" "-" which I assume means a 400 error. I don't understand why this doesn't work for me. My end goal is to have the base domain be https-only while all other pages default to http. How can I achieve this?

  Read the article

• I want to add a Quality Assurance domain. How do I handle DNS servers?

  - by Tim

  I'm advising a large client on how to isolate their dev and testing from their production. They already have one domain, lets say xyz.net with the active directory domain as "XYZ01". I want to add second domain say QAxyz.net and make its active directory domain "QA01" All development and QA servers would be moved to the QAxyz.net domain, the machines would be part of the QA01 domain. Note: Some of these servers will have the same name as the production servers for testing purposes. I believe we would have separate DNS servers for each domain. If I am logged into the QA01 domain, to access the production domain I would qualify my access like so: \PRODSERVER.xyz.net login: XYZ01\username Do I need to add a forwarder to my QAxyz.net DNS server so that it can see xyz.net? Would I need to do the same to the xyz.net DNS server to see QAxyz.net? I don't know how to advise them in this. Does anyone have any other recommendations to isolationg a QA domain? Many Thanks in advance! Tim

  Read the article

• Change Windows Authentication user for Sql Server Management Studio

  - by Asmor

  We're using Sql Server 2005 with Windows Authentication setup. So normally, when you log in using e.g. Sql Server Management Studio, it forces you to log in at MACHINE_NAME\Username. Anyways, on this one particular computer, the person said they had to make a new account called User01 to do something and showed me where she'd created it under security in the "master" system database. And so now when she logs in, it's listed as MACHINE_NAME\User01 (not the actual Windows user name). It's still set to Windows Authentication, though, and I'm unable to change the login name. Now here's where the real problem comes in... I didn't realize that she was being logged in under this user name at the time, and I disabled it to see what would happen. Now I can't log into the server under her account. I created a new account in Windows called test, and as expected SSMS had the username as MACHINE_NAME\test, and I was able to log in fine. However, the area where the User01 account was listed is not visible to me as far as I can tell and so I can't reenable it. I also tried running the following query: alter login User01 ENABLE And got this error: Msg 15151, Level 16, State 1, Line 1 Cannot alter the login 'User01', because it does not exist or you do not have permission. So in a nutshell, ideally I'd like to reenable User01 somehow, just to get things back to where they used to be. Failing that, how can I force SSMS to log in using the Windows account name as it should be, rather than trying to use User01?

  Read the article

• Vagrant doesn't detect chef-solo unless re-installed

  - by nightowl

  I am using Vagrant to test my Chef recipes in Amazon AWS, and I am encountering an irritating issue: I initially assumed that Vagrant would install chef itself (as it does when using Virtual Box as the provider) but it seems that this needs to be done using the cloud-init script. However, even after I successfully installed the chef gem via cloud-init I was still getting the following error: The chef binary (eitherchef-soloorchef-client) was not found A quick google of this error suggested three probable causes: Chef had failed to install It had installed, but the directory was not in the $PATH environment variable It had installed and in the $PATH but with incorrect permissions I logged in and double checked; chef-solo and chef-client were installed; The path variable for the user, sudo and root all included /usr/local/bin and permissions were all fine. I managed to solve this problem by uninstalling and reinstalling the gem using sudo gem install chef. I don't understand why this should resolve the issue and it is a bit of a problem if I have to ssh into a test box and manually install the gem every time. Does anyone have any suggestions why this might be happening?

  Read the article

• Word 2007 won't run, tries to reinstall, fails with error 1402.

  - by eidylon

  Okay, this problem has been plaguing this computer for a while now. We tried googling, and none of the answers found helped to solve the problem. So, I am now posting the answer here for posterity. Office 2007 Home/Student edition was installed on the computer, running Vista (32-bit). One day, Word just up and stopped working. All the other programs continued to operate as expected. But every time you would click the icon for Word, it would pop up an install dialog, with a message reading "Preparing to install...". After a few minutes of the little progress bar going and going, it errors out, and gives error 1402, something to the effect of unable to access registry key HKEY_Local_Machine\Software\Classes\.wll\.... Searching around, every answer i found had to do with reassigning the permissions on this key, giving full rights to SYSTEM or to Everyone, and propagating the changes down to all sub-keys. When ever this was attempted though, it would tell us that we were unable to access the key due to permissions, even though we had run regedit as Administrator and are logged on with an administrative account. We also tried uninstalling Office and reinstalling it, as well as doing a repair install. Both these attempts also threw the same 1402 error. Also of note was that the executable for Word (winword.exe) was MIA and no longer to be found in the Office install directory.

  Read the article

• Log Shipping breaking daily on SQL Server 2005

  - by IT2

  I am facing a somewhat serious problem with Log Shipping on SQL Server 2005 and I am having trouble to correct it, so I will try some help from SF's experts. I have a Windows 2003 Server (PROD) that ships transactional log backups to another two servers: STAND1: Windows 2003 Server with SQL Server 2005. STAND2: Windows 2008 R2 Server with SQL Server 2005. The problem is that Log Shipping to STAND2 is breaking for ~ 90 minutes some times of the day and returning back without intervention. The breaking occur at times when the backup file is larger (after reindexing, etc). I can see the message below logged on the COPY job: *** Error: The specified network name is no longer available The copy agent was breaking dozens times a day only to STAND2 server, and after the changes below "only" breaks ~ two times a day: The frequency of the backup job was changed from 5 minutes to 10 minutes. Instead of backing up the 4 databases to the same folder, the log backups are now saved on separated folders for each database. The backup job doesn't run 24hs now, and only for 14 hours a day, when people are working on the database. I configured the SQL Server instances on the three servers to limit the memory, leaving more memory to the OS. Now I don't know what to do. Any help will be much appreciated! Thanks!

  Read the article

• Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

  - by Matt Taylor

  I recently did a full upgrade of Windows 7 on my Thinkpad. Everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen before the Windows logo appears. Disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this won't boot with battery plugged in is greatly appreciated. I need to take this battery out on the road/trains, etc. A little more detail on this story. The battery I had inserted when doing the (failed) boot was a long life battery. I have not tried inserting this battery when Windows is logged in. I have another (normal life) battery that I have charged up within Windows. It has just got to 100% and I am about to reboot with it in. I am using the Lenovo power manager to diagnose the battery - all seems OK. I will report back shortly as to the outcome. OK, so I chose the reboot option from within Windows, the machine seemed to shutdown okay, but then stalled. It didn't turn off completely and didn't reboot, but just sat, with the fan humming, somewhere in between! I had to hold the power button in for a few seconds until the fan stopped and then hit the power button again to boot the machine from fresh. One good thing, with this battery (the normal one) it booted into Windows 7 the first time with a battery! So, now I have rebooting issues. I have 3 errors in the event log: A timeout was reached (30000 milliseconds) while waiting for the lxdxCATSCustConnectService service to connect. The lxdxCATSCustConnectService service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. The following boot-start or system-start driver(s) failed to load: cdrom Any thoughts?

  Read the article

• Server 2003 Remote Desktop loses its virtual printer image of the local printer

  - by Charles Hart

  Server 2003 Remote Desktop provides service to stores served by several ISPs. The server loses its virtual printer image of the local printer (as seen from the remote store site) and a copy of the original local printer appears on the local computer with a different driver without notice. Specifically: A remote desktop session is opened on a local computer that has a Brother HL2140 USB printer connected and the associated software installed with a correct driver shown under the “advanced” button. The server has the same Brother software and driver. An application that is running on the server attempts to print on the local printer connected to the local computer running Vista Pro or XP Pro. Either it works correctly (Good) or it does not print (Bad) or it prints on another Local Printer connected to another local computer logged into the server (Bad and Odd). When it doesn’t print (or prints somewhere else) we ask the customer to look for the (virtual) printer using the Remote desktop view of the server and the printer is gone. Then we ask the customer to look at the printers folder in the local computer. There are several possibilities: The printer is there, but the driver is mysteriously changed in the drop down to MDX something; we have the customer select the other (proper) Brother driver, and all is well again, as now after the change, the virtual printer in the server (which now matches the local printer) appears again, and so printing can resume. A “copy” of the printer mysteriously appears in the local printer’s folder and after we delete it the virtual printer in the server appears again and so printing can resume. Note that in both case 1 and 2, the server sometimes sends the print job elsewhere, to some other local computer. Meanwhile in the log file, endless errors are reported and the server eventually crashes, sometimes twice a day. I’m puzzled what changes the local printer driver and I’m puzzled what loads the copy 2 or copy 3 of the printer in the local printer folder. This entire description randomly occurs on any of 40+ local computers in eight different locations in different ISPs, all sharing one Domain.

  Read the article

• Bypassing SQUID on freebsd with PF

  - by epema

  I have PF+SQUID31 on FREEBSD-9.0, and I want to have some hosts(aka goodguys) to bypass the proxy, so that torrents are not logged. Also, I am not sure about transparent. It means that I dont have to configure proxy settings on the client side right? I have tried doing a redirect no rdr on $int_if inet proto {tcp,udp} from 192.168.1.233/32 to any However, no luck :( Here is a quick look of my conf files: SQUID /usr/local/etc/squid/squid.conf http_port 192.168.1.1:8080 transparent RC /etc/rc.conf: gateway_enable="YES" pf_enable="YES" pf_rules="/usr/local/etc/pf.conf" pflog_enable="YES" squid_enable="YES" I have squid31 installed from ports with SQUID_PF "Enable transparent proxying with PF" on PF /usr/loca/etc/pf.conf: int_if="re0" ext_if="bge0" localnet="{ 192.168.1.0/24 }" table <goodguys> const { "192.168.1.219", "192.168.1.233" } set block-policy drop set skip on lo0 scrub in all fragment reassemble scrub out all random-id max-mss 1440 block in on $ext_if pass out on $ext_if keep state block in on $int_if pass in on $int_if inet proto tcp from $int_if:network to $int_if port 8080 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 21 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 22 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 53 keep state pass in on $int_if inet proto tcp from $int_if:network to any port { smtp, pop3 } keep state pass in on $int_if inet proto icmp from $int_if:network to $int_if keep state pass out on $int_if keep state What lines should I add in conf files? I am assuming that the problem is on the firewall(pf).

  Read the article

• How do I secure Sql Server 2008 R2

  - by Mark Tait

  I have both a dedicated and a VPS (from Fasthosts) virtual server - the web sites/applications I run on these, access Sql Server stored on the same web server. Until now, I have logged onto Sql Server on both the deidicated and VPS server, from Sql Server Management Studio - until I noticed in my server application logs, multiple attempts to logon to Sql Server using the 'sa' username, but failed password. So someone/bot is trying hard (repeatedly every couple of hours, for approx 20 attempts during each instance) to log on... so obviously I have to lock down access to Sql Sever remotely. What I have done is gone into Configuration Manager, and in Sql Server Network Configuration - Protocols for Sql2008 and also in Sql Native Client 10.0 Configuration - Client Protocols - I have diabled Named Pipes, TCP/IP (and VIA by default). I have left Shared Memory enabled. I also disabled in Sql Server Services, the Sql Server Browser. Now the only way I can manage the databases on these servers, is by logging on to them via Remote Desktop. Can anyone confirm if this is the correct way of stopping anyone maliciously logging on to Sql Server? (I'm not a DBA or security expert - and there are hundreds of articles advising all different ways - but I was hoping for the experts here to confirm, or otherwise, if what I've done is correct) Thank you, Mark

  Read the article

• How to install the MySQL Ruby Gem on Ubuntu 9.10?

  - by misbehavens

  I am having a problem installing the Ruby Gem for MySQL. This is the command that I am running: sudo gem install mysql and this is the output that I'm getting: Building native extensions. This could take a while... ERROR: Error installing mysql: ERROR: Failed to build gem native extension. /usr/bin/ruby1.8 extconf.rb checking for mysql_query() in -lmysqlclient... no checking for main() in -lm... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lz... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lsocket... no checking for mysql_query() in -lmysqlclient... no checking for main() in -lnsl... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lmygcc... no checking for mysql_query() in -lmysqlclient... no *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/usr/bin/ruby1.8 --with-mysql-config --without-mysql-config --with-mysql-dir --without-mysql-dir --with-mysql-include --without-mysql-include=${mysql-dir}/include --with-mysql-lib --without-mysql-lib=${mysql-dir}/lib --with-mysqlclientlib --without-mysqlclientlib --with-mlib --without-mlib --with-mysqlclientlib --without-mysqlclientlib --with-zlib --without-zlib --with-mysqlclientlib --without-mysqlclientlib --with-socketlib --without-socketlib --with-mysqlclientlib --without-mysqlclientlib --with-nsllib --without-nsllib --with-mysqlclientlib --without-mysqlclientlib --with-mygcclib --without-mygcclib --with-mysqlclientlib --without-mysqlclientlib Gem files will remain installed in /usr/lib/ruby/gems/1.8/gems/mysql-2.8.1 for inspection. Results logged to /usr/lib/ruby/gems/1.8/gems/mysql-2.8.1/ext/mysql_api/gem_make.out What do I need to do in order to get this to install?

  Read the article

• Cisco Configuration backup with Windows Script.

  - by Jeff

  We have a client with a lot of Cisco Devices and we would like to automate the backups of these devices through telnet. We have both 2003 and 2008 servers and ideally use tftp to back it up. I wrote this: Set WshShell = WScript.CreateObject("WScript.Shell") Dim fso Set fso = CreateObject("Scripting.FileSystemObject") Dim ciscoList ciscoList = "D:\Scripts\SwitchList.txt" Set theSwitchList = fso.OpenTextFile(ciscoList, 1) Do While theSwitchList.AtEndOfStream <> True cisco = theSwitchList.ReadLine Run "cmd.exe" SendKeys "telnet " SendKeys cisco SendKeys "{ENTER}" SendKeys "USERNAME" SendKeys "{ENTER}" SendKeys "PASSWORD" SendKeys "{ENTER}" SendKeys "en" SendKeys "{ENTER}" SendKeys "PASSWORD" SendKeys "{ENTER}" SendKeys "copy startup-config tftp{ENTER}" SendKeys "(TFTP IP){ENTER}" SendKeys "FileName.txt{ENTER}" SendKeys "exit{ENTER}" 'close telnet session' SendKeys "{ENTER}" 'get command prompt back SendKeys "{ENTER}" SendKeys "exit{ENTER}" 'close cmd.exe On Error Resume Next WScript.Sleep 3000 Loop Sub SendKeys(s) WshShell.SendKeys s WScript.Sleep 300 End Sub Sub Run(command) WshShell.Run command WScript.Sleep 100 WshShell.AppActivate command WScript.Sleep 300 End Sub But the problem with this is the sendkeys are sent to the console session, I'm trying to find a solution that would not require a user to be logged in. Does anyone have any ideas? I have some knowlage of VBS, PowerShell and a pretty good grasp on batching.

  Read the article

• Anti Virus Service does not run - Windows XP SP3 32bit Home

  - by Stefan Fassel

  I have a somewhat strange problem here. I am trying to run Anti Virus Software on my Windows XP Home 32bit System. After a serious crash I had to fall back to an outdated copy of my initial installation and had Windows install 5 years of updates. So far so good. After Intalling a new Anti Virus Software (Bitdefender 2012) everything seemed to be fine, initial scanning went fine and configuration was working. But after restarting the System the Virus Scanner was unable to start up again. Even the Configuration console of the AV Software did not start. I tried scanning the System for malware, but nothing was found. Then I tried a different AV Software (MS Security Essentials), but in the end it did fail to start too. I have tried to start the Service manually, but I seem to be missing the privilege to do so. I am logged in as a Non-"Administrator" User with Admin privileges (Not much choices there on a XP Home System). I cannot switch to Administrator account outside the protected mode. When running Windows in protected mode I am unable to start the AV Software because it does not run in protected mode. I am a bit at loss now...

  Read the article

• Restricting Access to Application(s) on Point of Sale system

  - by BSchlinker

  I have a customer with two point of sale systems, a few workstations and a Windows 2003 SBS Server. The point of sale systems are typically running QuickBooks Point of Sale and are logged in with a user who has restricted permissions / access (via Group Policy). Occasionally, one of the managers needs to be able to run a few additional applications -- including some accounting software. I have created an additional user for this manager, allowing them to login and access the accounting software. The problem is, it can be problematic to switch users on the system, as QuickBooks takes a few minutes to close (on POSUser) and then reopen (on ManagerUser). If customers are waiting, this slows things down drastically. Since the accounting software is stored on a network drive, it would be easiest if the manager could simply double click something, authenticate against the network drive / domain controller and then the program would launch. When they close the program, the session to the network drive would be lost and the program would no longer be accessible. Is there any easy way to do this? Both users are on a domain and the system is Windows 7. I just don't want to require the user to switch back and forth. In a worst case scenario, they forget to switch back and leave the accounting software wide open.

  Read the article

• How to install rmagick on Ubuntu 10.04?

  - by Andrew

  Here's what I've done so far: sudo apt-get install imagemagick libmagickcore-dev This did not throw any errors, so I think that ImageMagick is installed fine. Then I tried installing the gem: sudo gem install rmagick This resulted in the following error: ERROR: Error installing rmagick: ERROR: Failed to build gem native extension. /usr/bin/ruby1.8 extconf.rb checking for Ruby version >= 1.8.5... yes checking for gcc... yes checking for Magick-config... yes checking for ImageMagick version >= 6.4.9... yes checking for HDRI disabled version of ImageMagick... yes checking for stdint.h... yes checking for sys/types.h... yes checking for wand/MagickWand.h... no Can't install RMagick 2.13.1. Can't find MagickWand.h. *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/usr/bin/ruby1.8 Gem files will remain installed in /usr/lib/ruby/gems/1.8/gems/rmagick-2.13.1 for inspection. Results logged to /usr/lib/ruby/gems/1.8/gems/rmagick-2.13.1/ext/RMagick/gem_make.out What do I need to do to install rmagick on Ubuntu 10.04?

  Read the article

• Homebrew large data cluster access for 2 user levels?

  - by Yegor

  The title probably makes little sense, so here is an example. I have a file hosting site, that serves a large amount of semi-randomly accessed files. The setup is as follows: High horsepower front-end +DB server that also does encoding for files that need encoding Fresh file server, which stores newly uploaded content, thats probably (and usually) rapidly accessible, which has 500GB of raided SSD storage, that can push over 3GBit of traffic. 3 cheap node servers, containing 2 x 750GB SATA drives in raid1, where files older than 2 weeks are archived, from the SSD server (mentioned above). Files on each server are accessed via subdomains (via modsec) in a straight forward fashion (server1.domain.com, server2.domain.com, etc) Where I have the problem is this. I introduced a "premium" service where people pay a small fee every month, and get ad-free, quick accesses to stuff on the site. Once they are logged in, they access same files via premium.server1.domain.com via a different modsec script, with a different pass phrase. That all works fine and dandy.... except the cheap node servers are all IO bound, so accessing the files on them via a different, unsaturated network makes no difference, since it cannot read off the drive fast enough. What would be a good way to make files on the site be accessible via 2 different network routes, 1 of which will be saturated (the "free network") while all other files are on an un-saturated "premium" network?

  Read the article

• Solaris 10 invalid ARP requests from 0.0.0.0? Link up/down every hour or 2

  - by JWD

  The guys at the data center where I'm hosting a server running Solaris 10 are telling me that my server is making a lot of invalid arp requests. This is an example of a portion of what was sent to me from the logs (with Mac addresses and IP addresses changed). [mymacaddress]/0.0.0.0/0000.0000.0000/[myipaddress]/[Datestamp]) It's being logged every hour. I don't see anything in the arp tables (arp -a) or routing tables (netstat -r) and I don't see anything relating to 0.0.0.0 when snoping the arp requests. The only place I see any reference to 0.0.0.0 is if I do netstat -a for the SCTP SCTP: Local Address Remote Address Swind Send-Q Rwind Recv-Q StrsI/O State ------------------------------- ------------------------------- ------ ------ ------ ------ ------- ----------- 0.0.0.0 0.0.0.0 0 0 102400 0 32/32 CLOSED But not really sure what that means. Doesn't seem like I can disable SCTP. There are some tunable SCTP parameters but it's not something I'm familiar with. Do I have to add changes to /etc/system? Looks like sctp_heartbeat_interval might be what I need to change? If it makes any difference, I have a few solaris zones running on this server, each with their own IP address on a virtual interface. eth0:0, eth0:1, etc. Does anyone have any idea what might be causing this and how to stop it? I think the switch I'm connected to doesn't like it and momentarily drops the connection. Is there anyway to at least block those requests using ipfilter or something else? Update: This was happening more frequently but now it seems to be happening roughly every hour or every two hours. It's not consistent. I tried setting setting the link speed and duplex to match the switch port and that seemed to make it stop happening for a few hours but then it started again.

  Read the article

• Why does Outlook 2007 lose connection to Exchange when Windows 7 64-bit turns off display?

  - by Greg R.

  The problem: When Windows 7 puts the display to sleep, Outlook 2007 and also Microsoft Office Communicator 2005 lose the connection to the Exchange server. When I unlock the computer, Outlook is logged out of Exchange and prompts me for credentials (although usually I have to restart Outlook to get it to reconnect). The network connection is still active, e.g. other applications don't lose their connection to the network or Internet when Windows 7 puts the display to sleep. I'm using a Dell E5400 notebook running Windows 7 Enterprise 64-bit with Outlook 2007 connecting to a corporate Exchange server (not sure if it's Exchange 2007 or 2010). The Dell is typically docked and connected via DVI (through the dock) to two Dell monitors. The Power Options in Windows 7 are set as follows: Turn Off The Display: 15 minutes Put The Computer To Sleep: never Those are the "Plugged In" settings but the problematic behavior is the same when running on battery. When Windows 7 turns off the display, it automatically locks the computer. E.g., I have to re-enter my credentials to access the machine. This is per corporate policy. The equivalent set up on my previous Dell notebook running Windows XP SP3 did not result in this problem with Outlook 2007 or Office Communicator 2005 connecting the very same exchange server. The problem began when I switched to the new Dell E5400 with Windows 7.

  Read the article

• Windows authentication to SQL Server via IIS and PHP

  - by Jeff

  We're running a PHP 5.4 application on Server 2008 R2. We would like to connect to a SQL Server 2008 database, on a separate server, using Windows authentication (must be Windows authentication--the DB admins won't let us connect any other way). I have downloaded the SQL Server drivers for PHP and installed them. IIS is configured for Windows authentication, and anonymous authentication has been disabled. $_SERVER['AUTH_USER'] reports our currently logged on Windows account. In php.ini, we have set fastcgi.impersonate = 1. When we setup a connection using the following code from Microsoft: $serverName = "sqlserver\sqlserver"; $connectionInfo = array( "Database"=>"some_db"); /* Connect using Windows Authentication. */ $conn = sqlsrv_connect( $serverName, $connectionInfo); if( $conn === false ) { echo "Unable to connect.</br>"; die( print_r( sqlsrv_errors(), true)); } We are presented with the following error message: Unable to connect. Array ( [0] => Array ( [0] => 28000 [SQLSTATE] => 28000 [1] => 18456 [code] => 18456 [2] => [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. [message] => [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. ) Is it possible to connect to SQL Server 2008 via PHP using Windows authentication? Are there any additional required settings we need to make on IIS, SQL Server, or any other component (like a domain controller)?

  Read the article

• Server stops responding, can't find issue?

  - by Corey W

  I've had a pretty basic server up and running CentOS with webserver/database, and have noticed that it has locked up a few times in the middle of the night. It seems to happen randomly. When it locks up I can ssh in, (although it seems to hang once connected), but can't access cpanel/whm and have to reboot the server to get everything back up. Checking the messages log I see the below like clockwork every 5minutes 1 second, and then it just stops logging anything until I reboot. I can't seem to find any log showing any issue? Is there somewhere I can check to try to figure out what is happening? Could this be caused by CPU being maxed? Nov 17 08:01:35 s1 pure-ftpd: (__cpanel__service__auth__ftpd__Q13SKrtaCJCHjBezTfU8Iqmsi@127.0.0.1) [INFO] Logout. Nov 17 08:06:36 s1 pure-ftpd: ([email protected]) [INFO] New connection from 127.0.0.1 Nov 17 08:06:36 s1 pure-ftpd: ([email protected]) [INFO] __cpanel__service__auth__ftpd__mxidFBSnQXmR0QzqSxlqrXLIH0CmJ0GPh9bZ5V3 is now l ogged in Nov 17 08:06:37 s1 pure-ftpd: (__cpanel__service__auth__ftpd__mxidBDaCgnqSxlqrXLIH0CmJ0GPh9bZ5V3@127.0.0.1) [INFO] Logout. Nov 17 08:11:37 s1 pure-ftpd: ([email protected]) [INFO] New connection from 127.0.0.1 Nov 17 08:11:38 s1 pure-ftpd: ([email protected]) [INFO] __cpanel__service__auth__ftpd__T4B7F71acf1dsdJSeJHdqKNcbOdpzNnN_GttgcM is now l ogged in Nov 17 08:11:38 s1 pure-ftpd: (__cpanel__service__auth__ftpd__T4B7F71acf1KNcbOdpzNnN_GttgcM@127.0.0.1) [INFO] Logout. Nov 17 08:16:38 s1 pure-ftpd: ([email protected]) [INFO] New connection from 127.0.0.1 Nov 17 08:16:38 s1 pure-ftpd: ([email protected]) [INFO] __cpanel__service__auth__ftpd__W5C1RzumtaNwe4cU8Lt1 is now logged in Nov 17 08:16:38 s1 pure-ftpd: ([email protected]) [INFO] Logout. Nov 17 09:10:58 s1 kernel: imklog 4.6.2, log source = /proc/kmsg started. Nov 17 09:10:58 s1 rsyslogd: [origin software="rsyslogd" swVersion="4.6.2" x-pid="1094" x-info="http://www.rsyslog.com"] (re)start Nov 17 09:10:58 s1 kernel: Initializing cgroup subsys cpuset

  Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >