Search Results

Search found 4361 results on 175 pages for 'multivariate partition'.

Page 118/175 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

• ISO Live Session from an External Hard Drive?

  - by amemus

  Is it possible to use an external hard drive to start a live Ubuntu session? Is having an ISO file as the whole content of the first partition of the device enough? Thank you for reading...! EDIT upon reading the first comment to my original question: If I remember correctly, I COULD run a live session of Oneiric Ocelot somehow. It was not from a CD because I failed to burn one, so it must have been from an ISO file. Still very very confused....

  Read the article

• Restoring Virtualbox machine images from old hard drive

  - by memilanuk

  I recently replaced the HDD in my laptop, and re-installed Windows & Ubuntu. Now I want to restore the various virtual machines I had set up on the old HDD, which is mounted in an external USB enclosure. I can read the HDD okay, and the 'bad' spots seemed to be in the Windows partition... but whenever I try to restore the VDI files the copy errors out. I've tried drag-n-drop in Nautilus, I've tried grsync, etc. Always bombs out on the VDI files. I've copied over multi-GB dvd iso images with no problem, but the VDI files always fail the checksums. Any ideas? TIA, Monte

  Read the article

• How can I fix intermittent iSight camera functionality on a Macbook Pro 5,2?

  - by Mmmm

  I have a Macbook Pro 5,2 laptop dual booting OSX and Ubuntu. The built-in iSight video camera works only sporadically. By that I mean that sometimes if I boot and try to use the camera it does not work (most of the time) but other times it does. I don't have good repeatable data regarding when it does vs. when it doesn't other than to say that it always seems to work right after I upgrade to a new Linux kernel with the Update Manager and reboot, but then eventually stops working again until I upgrade the kernel again. That is hard to test repeatably, so it's hard to know for sure that that is the case. This has happened consistently with every version of Ubuntu from 10.10 through 11.10. I can get around this by booting into the OS/X partition, since all of the hardware obviously works perfectly on that side of things, but it would be great if I could remain in Ubuntu and do the same thing. Thanks in advance for any inSights.

  Read the article

• Why not sync folders outside home with ubuntu-one?

  - by peer

  It took me a while to find out that with ubuntu-one I can sync only folders in my home-folder. On all other folders the ubuntu-one - option is available in preferences, but the actual actions are greyed out. The ubuntu-faq is quite clear on that: https://wiki.ubuntu.com/UbuntuOne/FAQ/CanISyncAFolderOutsideMyHomeFolder But I actually wonder why and if this is going to change and if there is a trick around it (an other one than setting my home to /) I personally dont have any important data in my home-folder other than the program-configs. All documents, pictures, music are on a folder called /data that is actually on a different partition. That makes it much easier when one wants to reinstall ubuntu.

  Read the article

• My Hard Disk Drive is not visible until I use it

  - by Matthew

  So, suddenly something went wrong. At the beggining of my Ubuntu usage it was all right, but from about 2-4 weeks I've got this problem: Whenever I try to reach my HDD, i have to open it first by files explorer. Example: I use text editor. Last file fails to load, so I got to open it manually. It's in bookmarked file. I want to reach my bookmark, which is on HDD(partition for both Ubuntu and Windows , NTFS). If i want to reach my bookmark, i have to go there manually(or at least to HDD, then bookmarks pops up). It also doesn't appear at my side bar until i use it. It kinda looks like it wasn't mounted till then, I don't know. It would be nice if I could deal with it, let's say, automatically. Thanks in advance.

  Read the article

• Grub errors dual boot Windows 8 / Ubuntu 12.10

  - by luca-mastro

  I have got a newly bought ASUS N56V with Windows 8 preinstalled. I needed to install Ubuntu so i partitioned the disk and after having disabled the Secure Boot option from Windows 8 i successfully installed Ubuntu 12.10 from a Live USB. The problem is that if i try to access both to Windows 8 (loader) and Windows Recovery System (loader) from the grub menu, these tow errors show: "can't find command 'drivemap' " and "invalid EFI file path" and it goes back to the grub menu. In conclusion I do not have access to my Windows 8 partition but can only use Ubuntu. How can I solve the problem? I am pretty new to the matter. Thank you!

  Read the article

• Running Server With minimum core OS with VM

  - by user170019

  I want to start a server but all my application will be in a virtual partition. Therefore, I need just a very minimal core OS that can support virtualbox as there will no usage of core OS other than start up the virtualbox. Any OS that is suitable for this situation? Tried JEOS and Fedora minimal installation which is only CLI. However, I cant make those 2 OS to support virtualbox. Please help. Sorry Im totally new to Unix and CLI. Thanks

  Read the article

• Failure to start grub with Wubi

  - by Marco Ceppi

  My laptop battery ran down and died while using Ubuntu 10.04 with Wubi. Upon recharge (and restart) selecting Ubuntu from the Windows Boot menu brings me to the typical prompt which says (and I paraphrase): Trying hd(0,0) on Disk... After that the screen flickers to white (for a split second) then black. No grub menu comes up (as I would expect) no cursor, no grub sh prompt. Nothing. I've tried switching TTYs to no avail. As there are no logs, I can't trouble shoot anything. I've run a check disk from windows (on the NTFS partition the root.disk is stored) with no luck. What is causing this failure to load grub (and, by association Ubuntu) - How can I restore my setup and get Ubuntu via Wubi working?

  Read the article

• Setting up a GUI-based libvirt VM

  - by LibertasMens

  I am attempting to create a virtual machine using libvirt that will have a GNOME GUI and remote accessibility. I have successfully set up the VM to run, but I am unable to access it remotely. The command issued to build the VM: sudo vmbuilder kvm ubuntu --suite=precise --flavour=generic --arch=amd64 --mirror=http://de.archive.ubuntu.com/ubuntu -o --libvirt=qemu:///system --part=/usr/xxxx/vmbuilder.partition --templates=/usr/xxxx/mytemplates --addpkg=nano --addpkg=unattended-upgrades --addpkg=acpid --firstboot=/usr/xxxx/boot.sh --cpus=2 --mem=4096--user=xxxx --name=xxxx --pass=xxxx --hostname=xxxx --bridge=br0 My intent is to have a virtual machine that my client can remotely access with a GUI.

  Read the article

• root and home are on seperate partitions, but home still uses up space on root?

  - by Void

  When installing Ubuntu 12.10 for the first time, I made sure /home had it's own partition, gave it about 185GB, and gave root ~10GB. Now root is almost full after a few days and I've noticed that root is as big as /home and some additional MB from some actual root files. Note that I deleted some unused files in /home to make sure it really affects how much space is used in root, and it clearly does. (checked in gparted) I've also made sure the files I am talking about are actually in /home/myname/ and not just in root's home. df -h spits out this information: df: `/root/.gvfs': Permission denied Filesystem Size Used Avail Use% Mounted on /dev/sdb2 9.2G 7.9G 908M 90% / udev 3.9G 12K 3.9G 1% /dev tmpfs 1.6G 932K 1.6G 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 6.4M 3.9G 1% /run/shm none 100M 112K 100M 1% /run/user /dev/sdb3 184G 4.9G 170G 3% /home /dev/sdb4 729G 87G 642G 12% /media/mave/Storage I cut out my windows partitions as I don't see any relevance. I hope this is enough information for someone to tell me what I did wrong

  Read the article

• How to boot into Live USB/CD with UEFI on latest Vaio S series?

  - by user76528

  I am unable to boot from USB/CD into a live Ubuntu session to proceed with install. Esc or F12 didn't work and I can't seem to be able to enter the bios settings. Sony Vaio S w/ Ivy Bridge (just one month old, Insyde H2O EFI?) I have read about: creating /EFI/boot on a fat16 stick http://ubuntuforums.org/showpost.php?p=12071096&postcount=2 installing rEFInd using the Alternate install CD (supposedly in order not to mess with W7 UEFI boot partition) It's pretty clear what I have to do afterwards http://askubuntu.com/a/157062 but I am at loss on how to simply boot into a Live Session then install. Thank you

  Read the article

• Partitioning with preseed help

  - by kostasp

  I have a server that has 4 hds inside all in stadalone configurations (no hardware raid). I want using preseed to create a "regular" partition on disk1 on which i ll install ubuntu and create a raid 0 array with the remainning three disks. Is this possible? Can i use partman-auto/method twice inside the preseed file once for regular and once for raid? I need to use this for unattended provisioning so i need to set my disks inside the preseed file. Thanking you all in advance for your time. Costas

  Read the article

• bootloader install failed

  - by user211860

  I have lenovo u510 with windows 8. This ultrabook has 24GB SSD and I tried to install Ubuntu 12.04.3 in it. I changed bios from UEFI to legacy and I used a LiveDVD. I created a 17GB partition when I was in windows from this SSD and I tried both manualy or with the "install alongside" but was allways without success because bootloader install failed and was unable to install GRUB. I tried also to use the "recommended repair" from Boot-Repair but it says that my laptop can only with UEFI boot. I changed it but the same thing happens my laptop boot in windows 8.

  Read the article

• HP dv2700 series, Wifi not working in Ubuntu 12.10, Wifi Button always disabled

  - by Chicoscience

  I have a HP dv2745se laptop. I always had Ubuntu with the Native Windows Vista and Wifi worked fine. Suddenly my Ubuntu wouldn't load anymore, I tried fixing it for a week and eventually I formatted its partition and just installed Ubuntu 12.10 This laptop has a Wifi switch that works fine in Vista disabling / enabling the wireless connection. HP Wireless Assistant in Windows say Wireless is on. However, whenever I log in Ubuntu the Wifi button is always orange (disabled) and Wireless never works. I had this problem once when I had Ubuntu 12.04 and I fixed it by verifying in Windows that the Wireless Assistant showed the Wireless LAN in "On" mode. However, the same does not work now. I've seen some possible solutions that involve updating the firmware with apt-get. There comes my 2nd problem, my network adapter card is not working and thus I have no internet at all. Any suggestions? Thanks!

  Read the article

• why is it a risk to clone a LUKS container?

  - by laramichaels

  I recently installed Ubuntu onto an encrypted partition using the LUKS+LVM combination that the 'alternate' installer offers. Now I want to create backups of my HD. From the LUKS FAQ: 6.15 Can I clone a LUKS container? You can, but it breaks security, because the cloned container has the same header and hence the same master key. You cannot change the master key on a LUKS container, even if you change the passphrase(s), the master key stays the same. That means whoever has access to one of the clones can decrypt them all, completely bypassing the passphrases. How can the existence of a perfect clone of my encrypted HD break security if it contains the exact same information as my live encrypted HD? In which sense does keeping updated clones of my LUKS-encrypted HD around "break security"?

  Read the article

• removing ubuntu from a laptop (corrupted ubuntu)

  - by Ron

  I wanted to update my (very old) Ubuntu installation on my dual boot laptop. The other OS is win7. However, when I tried to boot into it I got: \ubuntu\winboot\wubildr.mbr cannot be loaded. Status 0xE0000000C. I assume the mbr is the master boot record for the Ubuntu installation. I looked at my C: drive and there's a WUBILDR and WUBILDR.MBR file there. Is it as simple as deleting them? ALSO, I just noticed there is no UBUNTU partition. If I delete these files and then get rid of the startup option for Ubuntu, is that all I have to do? (My goal is to have an up-to-date Ubuntu OS alongside Win 7).

  Read the article

• dual boot, Sony Viao, all in one portable desktop, not working and crashes

  - by user287513

  I am a fan of Ubuntu but ever since I bought my new computers, both Sony Vaio, I can't get them running together with windows 8.1. When I try wubi, it doesn't show the install box, but some other information box. If I remove wubi from the iso and run it as admin on my desktop, it runs and installs but after rebooting, grub never comes up and it gives the error screen.. On my laptop, I had to make a usb install and partition everything myself and that worked for my laptop, for a little while. Windows boot loader would override and grub wouldn't come up no more, unless I try to boot from usb, with no usb in, and after it reboots because there is no usb, now grub opens, but doesn't cont. That is what happens with my Sony 2 in 1 laptop. My all in one portable just wont boot it period. Bios is the problem but I disabled everything that was necessary. Help

  Read the article

• Ubuntu will not load up from my USB

  - by Ryan Mungwira

  I have a Sony Vaio Duo 13 and I am trying to get Ubuntu 13.10 to run on a partition on my Ultrabook but it will not load up from the USB drive. It goes to the black screen that asks if you just want to Try Ubuntu or if you want to Install it. I click just to try and it will not load. It acts like it is going to start up but then it just goes to a blank black screen and then I have to a hard restart. It does that when I click install as well. And I have tried disabling the Secure Install on my computer as well and nothing happens! What do I do?!?

  Read the article

• 12.04 Install on a HP dv9000 screen problem

  - by Tim Kounadis

  Installed 12.04 on a HP dv9000 laptop. First tried to install with a Windows partition; then tried to install and move files from windows but not have a dual boot; then tried to install and have 12.04 have the system all to itself. The install was done off a burned CD... All went well. On reboot - it takes a while to come up the user ID and password challenge. After providing input screen renders and then turns black... First time Ubuntu user/installer - not technical :-)... Thanks for any help... I'll keepon digging in parallel.

  Read the article

• Wifi works perfectly on Windows, but drops on Ubuntu

  - by alecRN

  I have a dual-boot computer with Windows XP on one partition and Ubuntu 10.10 on the other. In Windows XP I can connect to a hidden wireless network (WPA-PSK AES) perfectly, and I was finally able to install the driver for the adapter on Ubuntu (RNX-N180UBE, hardware id RTL8191SU). It works fine when I first boot the computer and log in, but then after a few minutes the network suddenly stops working completely. If I try to reconnect it, the network manager claims to have connected, but in actuality it's still down. At some points, I have been able to connect to a public network even while the private network didn't work, but that eventually wouldn't work at all either.

  Read the article

• Triple Boot Question

  - by Rick

  I have successfully set up a a win7,win8 and Ubuntu 12.10 system. Windows 8 and Ubuntu are located on the same SSD, while windows 7 is located on another SSD. All went great and I can continue playing around with all 3 OS's. My only annoyance is, while restarting, windows 7 boot loader runs first. If I select ubuntu in the win7 manager it then runs grub2 and asks me to select an os. I used easy bcd to add entries into win8's boot manager and was hoping to just use that one. I installed ubuntu's loader on to its own partition. Any suggestions to just use Win8 loader and still be able to choose between all 3?

  Read the article

• Windows 7 won't boot

  - by Johnny

  I installed Ubuntu from my live CD and chose to install it alongside Windows. Yesterday, everything worked just fine and I was able to boot from either OS. However today, only Ubuntu will boot and Windows 7 fails to start every time I attempt to (even after restoring my Windows 7 partition to the last known good date). What could have changed over night that caused this? I did install all the recommended updates for Ubuntu. Is my only option going to be to wipe my HDD and reinstall both Windows and Ubuntu?

  Read the article

• Please help me in installing Ubuntu 12.04.1. and Can it run MS Off. Prof. Plus 2007?

  - by ramandeep

  I want to install Ubuntu with MS Office Professional Plus 2007 running. I want to format my hard drive with slow speed as it happens when we install xp. The all cleaning with no traces left. For that what'll be easy to do: 1) Formatting entire hard drive OR 2) Formatting only that partition on which I want to install Ubuntu? I should be sure that I can run MS Office Professional Plus 2007 on Ubuntu. I have ubuntu-12.04.1-desktop-i386.iso burned on a CD and have MS Office Prof. Plus 2007 in this form - http://i.imgur.com/qAhP8.jpg I also want to know when I update Ubuntu how much MB will it be?

  Read the article

• How do I fix the Gparted message : Error while reading block at sector xxx ?

  - by Agmenor

  When I tried to move one of my partitions, I got some error messages. Here are some extracts: Move /dev/sda7 to the left 00:05:09 ( ERROR ) (...) check file system on /dev/sda7 for errors and (if possible) fix them 00:00:10 ( SUCCESS ) e2fsck -f -y -v /dev/sda7 (...) move file system to the left 00:04:52 ( ERROR ) perform read-only test 00:04:52 ( ERROR ) using internal algorithm read 114013242 sectors finding optimal blocksize (...) read 113357882 sectors using a blocksize of 1024 sectors 00:04:36 ( ERROR ) 22527034 of 113357882 read Error while reading block at sector 385849832 23182394 sectors read ( ERROR ) (...) libparted messages ( INFO ) Input/output error during read on /dev/sda What should I do to effectively move my partition?

  Read the article

• Why not sync folders outside home with Ubuntu One?

  - by peer

  It took me a while to find out that with Ubuntu One I can sync only folders in my home folder. On all other folders the Ubuntu One option is available in preferences, but the actual actions are greyed out. The Ubuntu One FAQ is quite clear on that: No, currently you can only select to synchronize folders inside your home directory. But I actually wonder why and if this is going to change and if there is a trick around it (an other one than setting my home to /) ? I personally don't have any important data in my home folder other than the program configs. All documents, pictures, music are on a folder called /data that is actually on a different partition. That makes it much easier when one wants to reinstall Ubuntu.

  Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >