Search Results

Search found 19009 results on 761 pages for 'network shares'.

Page 118/761 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

  • Utilize two gateways on the same network same interface with load balancing

    - by RushPL
    My setup is two ISPs on a single interface and single network. I can either set my default gateway to 192.168.0.1 or 192.168.1.250 and either work. My desire is to utilize both of them with some load balancing. I have tried to follow the advice given in here http://serverfault.com/a/96586 #!/bin/sh ip route show table main | grep -Ev '^default' \ | while read ROUTE ; do ip route add table ISP1 $ROUTE done ip route add default via 192.168.1.250 table ISP1 ip route add default via 192.168.0.1 table ISP2 iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A PREROUTING -j MARK --set-mark 10 iptables -t mangle -A PREROUTING -m statistic --mode random --probability 0.5 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -j CONNMARK --save-mark Now then I do "traceroute somehost" repeatedly I can only get route through my default route which is 192.168.1.250. Shouldn't the packets change routes in a random manner? How to debug it?

    Read the article

  • Machine only responds to network requests from machines it is pinging

    - by ILikeFood
    I have two machines. WOPR: Ubuntu server edition 10.10 LTS 32 bit Adam Selene: Windows 7 home premium 64 bit / Ubuntu Desktop 10.10 LTS 64 bit I want to be able to SSH from Adam Selene to WOPR, so I connect them to the same network. Here's where things get weird. I cannot connect to WOPR in any way under normal circumstances. But, if WOPR is pinging Adam, then it starts responding to ping requests, HTTP gets, and SSH tunnels. I'm an amateur, and brand new to Ubuntu server, so I suspect there's a misconfiguration somewhere, but there's an off chance it's a bug in the OS. Does anyone know what might cause this behavior? Thanks a lot!

    Read the article

  • Outlook 2010: using signatures stored on network

    - by Gregory MOUSSAT
    With Outlook before the 2010 version, it was possible to specify any path for the signatures. With Outlook 2010, the only way is to use those stored into C:\Documents and Setting\UserName\Local Settings\Application Datas\Microsoft\Signature\ I'd like to point the signatures to a network share. Allowing us to modify the signatures into the share, instead of login on every computers each time we are asked to modify them (and this is quite often because the signatures contain logos about current events). We currently use a script to copy the signatures from the share to the local disk when users login. Question: How to set Outlook 2010 to use signatures outside of the default signature folder ?

    Read the article

  • Server monitoring for medium scale UNIX network

    - by nbartolomeo
    I'm looking for suggestions for a good monitoring tools, or tools, to handle a mixed Linux (RedHat 4-5) and HPUX environment. Currently we are using Hobbit which is working reasonably well but it is becoming harder to keep track of what alerts are sent out for what servers. Features I'd like to see: Easy configuration of servers. The ability to monitor CPU, network, memory, and specific processes I've looked into Nagios but from what I have seen it won't be easy to set up the configuration for all of our servers ~200 and that without installing a plugin into each agent I won't be able to monitor processes.

    Read the article

  • Network Drive Via Ethernet Port for Speed?

    - by Yar
    I have a Macbook with Firewire 400 and USB 2.0, so the only way I can get fast external storage is through the Ethernet port. A really fast firewire 800 drive on ANOTHER computer is actually much faster than the built-in drive (according to XBench). So I thought I would try to go one better and buy an ethernet-ready drive. I bought a Seagate GoFlex™ Home Network Storage System, and it seems like the only way to get it to work is to plug it into a router. Can this drive be used without a router (i.e., direct to computer)? Are there any drives that can be plugged directly into the ethernet port for fast access? I don't want the drive on my router: I want it on my computer. Ideally I'd need 7200rpm or faster, too... Update: Just chatted with Seagate and they said that this particular drive will not work that way. Will any others?

    Read the article

  • Misbehaving Network Printers - options?

    - by Dan Kelly
    We are having some issue with printers on our network. We have 3 floors, 2 printers per floor (A3 & A4) all connected to the same Print Server. The issue is that the same printer may not behave the same on two different, seemingly identical desktops. The commonest place this is seen on our bulk print script in AutoCAD - occasionally drawings may print Landscape on Portrait paper, despite drawings always being Landscape... Does any one have any suggestions on what we can check / try? The current line of attack is to setup a new Print Server, with the HP universal print driver rather than the device specific drivers, and replace printers using exactly the same method on all desktops. Sound good?

    Read the article

  • Network interface selection

    - by Antonino
    Hello. Suppose I have more than a network interfaces and I want to selectively use them per application. eth0 is the standard interface with the standard gateway in the main routing table eth1 is another interface with a different gateway. Suppose I launch an application as a user "user_eth1". I used the following set of rules for iptables / ip rules. IPTABLES: iptables -t mangle -A OUTPUT -m user --uid-owner user_eth1 -j MARK --set-mark 100 iptables -t nat -A POSTROUTING -m user -uid-owner -o eth1 user_eth1 -j SNAT --to-source <eth_ipaddress> IPRULE: ip rule add fwmark 100 lookup table100 and i build "table100" as follows (no doubts on that) ip route show table main | grep -Ev ^default | while read ROUTE; do ip route add table table100 $ROUTE; done ip route add default via <default_gateway> table table100 It doesn't work at all. What's wrong with this? Thank you in advance!

    Read the article

  • Connecting/Adding a private network on windows server 2008

    - by WhyMe
    Hey all, I have a dual server configuration on a host provider using VPS. I was told by my Host provider that in order to use free bandwidth between my two servers (they are in the same location) I need to add a alias "subnet" to a specific ip (A private network, VPN). How do I add an aliased ip in widnwos? in Linux the relevant command is supposed to be (By my search in blogs) "ifconfig eth0:1 10.129.175.165 netmask 255.255.255.0" They also said that another way to connect between the servers (should also be faster) is to use "private lan", but as it happens I don't know how to define one :(. Is there a windows equivalent or another way to do this? I have checked my ip config and found no indication of the private lan or the VPN ip.

    Read the article

  • Ubuntu server loses network connection after ADSL2+ modem reset

    - by squashbuff
    I am using an ubuntu 10.04 server (running on a Lenovo Thinkpad notebook) as my webserver. It is performing well in terms of handling the traffic etc. However my internet connection is ADSL2+ (using Thomson TG782T modem-router) and if the modem is reset, then my server loses network connection. The networkmanager icon shows a red exclamation mark showing that is has no connection. But as soon as I click on it and tell it to connect to eth0, the connection is back on. It must be something that networkmanager is failing to do and because of this, the reliability of my webserver is suffering. Any advice on how this can be fixed?

    Read the article

  • How to to specify network address for a dhcp client

    - by drecute
    I have setup and configured a DHCP server on a sparc running Solaris 10. Now I want to test the DHCP server by creating a DHCP client on another computer running Solaris 11. I would like to know, how do I specify a network address for a dhcp client such that its generated ip address is within a specific subnet. For example: The DHCP server host = 172.1.1.1 So I want the client machine to have an IP Address in the range of 172.1.1.1 255.255.255.0. Please help me.

    Read the article

  • Network connectivity issues with Windows Store

    - by Duy Tran
    I have my Windows 8 Pro build 9200 installed on my Dell laptop. I want to install some new apps and updates from the Store but there might be some network problem that caused the downloading gauge showing up but not really running at all. I followed some instructions that switched from local user to my Microsoft account, but this "Please wait" screen keeps showing and I don't really know why. I still have internet access and can use some apps like People, Mail, etc. with my account logged in, I can surf the net using Firefox, Chrome and Internet Explorer. I did another test using cmd with ping -t google.com and it showed that my laptop has internet access. Anybody knows a solution to make the Store working properly? Or is there any workaround to switch to the Microsoft account instead of a local user account?

    Read the article

  • Cannot access internet or remote network after connecting to Windows VPN

    - by Kiewic
    I set up a VPN by creating an incoming VPN connection (VPN server) in my Windows 8 machine at home (not a Windows Server). I forwarded the PPTP port in my router (port 1723) to this machine and enabled PPTP passthrough. In a second Windows 8 machine out of home, I created an outgoing VPN connection (VPN client). And I am able to connect to my home VPN, but I don't have access to any home resource or even internet. This is the output of the client ipconfig: And this are the settings of my VPN server: UPDATE: My VPN server has assigned the 192.168.1.144 IP adress at my home network. So, I tried setting the "IP address assignment" range from 192.168.1.150 to 192.168.1.200. And when a VPN client gets connected, it gets an address in that range, but it doesn't make any difference.

    Read the article

  • Will NTP work in an isolated network ( in absence of a reliable time source)

    - by Anand
    Hi, I am investigatiing a typical NTP problem. The setup is as follows :- FreeBSD is being compiled and run on Opensolaris. The config file on OpenSolaris has entry of linux and another opensolaris machine as server and these server machines are syncing time with themselves (local clock) only. The server machines in this case have NTP running on them as well. Within a few minutes of starting the ntp daemon ,client starts syncing time with itself only and remains in that situation after that.All servers are discarded and no time syncing is done with them. My question is , is there any fundamental problem with this setup. Will the NTP work in such isloated network that has no direct or indirect connection with reliable internet time source ?

    Read the article

  • Appropriate Network switch for small server cluster

    - by Chris Dutrow
    Need to build a small business server cluster for the purpose of crunching data. It will not host a web site that needs to be available 24/7. It does need to support servers that host Redis, a Cassandra database cluster, and a Python web server. Operating system will most likely be Centos 6.4 Other servers in the cluster should be able to communicate very fast with each other, especially the Redis server. This will probably require the use of internal IP addresses. We will need to use multi-data center replication to synchronize the Cassandra cluster with the one that we currently have hosted on the cloud Was looking into network switches and we are unsure of the appropriate specifications that we should be looking for. Does the switch need to be "managed" or can it be "unmanged"? Does the switch need to support IPv6 or just IPv4? Do we need an enterprise level Cisco switch, or can we go with something like a $200 DLink managed (or unmanaged) small business switch? Thanks so much!

    Read the article

  • Laptop connects to other network but not to my home wireless

    - by Nilesh
    My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

    Read the article

  • Home Network Photo Server

    - by CMP
    I am looking for a photo solution for our home network. We have several computers, running windows and OS X. I would like to store all of our photos in a central location, and have them be accessible from any machine. Most of our photos are currently in an iPhoto library, and ideally there would still be a way to import photos from the server to iPhoto easily. This can run really on any operating system, but it must be easily accessible for anybody. A gallery type view would be good, but also must allow direct file access and transfers. Anybody have a solution that works for them, or any ideas of what I could do?

    Read the article

  • Name of my sql server instance from outside the network

    - by Michel
    Hi, normally i connect to my sql server instance from my local computer, and then the server name to connect to is the name of my laptop. So i can connect to server instance 'MichelLaptop' But now i'm trying to connect to my server from outside my network, and the first thing i wonder is: what is the name of the instance? i've made a redirect to my local machine in the DNS of my domain, so i said (this is not the real data) testsql.mydomain.com goes to 190.191.192.193 and when i ping testsql.mydomain.com, i get a response from 190.191.192.193 But what then is the server name?

    Read the article

  • No internet connection for some programmes after installing ad hoc wireless network

    - by Michael
    After installing a wireless network (through the program iPhoneModem) several programmes have stopped working when connected to the Internet using another wireless connection. Working programmes: Firefox (browser) uTorrent (p2p) FileZilla (ftp) etc. Programmes that are not working: Chrome (browser) Digsby (IM client) etc. I'm running Windows 7. I have tried to disable Windows Firewall entirely as well as AVG anti virus, with no effect. I've tried to run the FixIt program from Microsoft adressing a corrupt TCP/IP stack. This too had no effect. Any suggestions?

    Read the article

  • Transparently cache files from a network drive in Linux

    - by Vadim
    We have a Linux server that reads files from a network drive and processes them. In a common scenario, a user will log in and access the same files over and over again. The size of the files varies but the larger ones can be around 50+ Mb. The files seldom change. I was wondering if it's somehow possible to transparently cache the files. I don't want (or can) change the program the reads the files, nor do I control the protocol by which the files are accessed. I just want something to detect that I access a certain path, copy the file locally (if needed) and then read the file from the local drive. I've read about Bcache but can't figure out if it's what I need. Do you have any suggestions? Thanks, Vadim.

    Read the article

  • VNC-like remote control over home network

    - by Widor
    I'm aware of how to use VNC to share screens or grant remote control of your machine over the internet by using VNC or one of the web-based "go to my pc" type services. If two computers are connected to a router (i.e. standard home network), is there an easier way of viewing and controlling one computer from the other? I'd like to avoid going outside the LAN, onto the internet, then back in if possible. Both machines are Windows XP, but I'm not looking for Remote Desktop by the way.

    Read the article

  • Flow of packets in network

    - by user58859
    I can't visualize in my mind the network traffic flow. eg. If there are 15 pc's in a LAN When packet goes from router to local LAN, do it passes all the computers? Does it go to the ethernet card of every computer and those computers accept the packet based on their physical address? To which pc the packet will go first? To the nearest to the router? What happens if that first pc captures that packet(though it is not for it)? What happens when a pc broadcast a message? Do it have to generate 14 packets for all the pc's or only one packet reach to all pc's? If it is one packet and captured by first pc, how other pc's can get that? I can't imagine how this traffic is exactly flows? May be my analogy is completely wrong. Can anybody explain me this?

    Read the article

  • Accessing localhost on IIS7 from another computer on the network

    - by Adam
    I recently upgraded computers to Windows 7 Professional and am running IIS7. When I'm on my computer I can easily access localhost through my web browser but when I try from another computer on my network (replacing localhost with my computer name) it doesn't work. I also tried using "computername.domain.com" and still no luck. I can access other computers running Windows XP and IIS 5 but I'm having no luck accessing my own from another computer. I checked and my IIS7 has anonymous users enabled. Am I missing any other setting? Is this an IIS7 thing or am I missing a setting? Thanks in advance!

    Read the article

  • Simulating network latency for localhost connection on Windows 7

    - by nitro2k01
    I need to simulate network latency to a program running on the local computer, connecting to a local service. Thus far I have tried dummynet (a windows build of ipfw) which I got working after some trial and error. While it generally works, I can't seem to get it to filter localhost traffic. Even after adding a rule from any to any which affects external traffic, this makes no difference for local connections. I would appreciate if anyone knows how to simulate local latency using dummynet or a different tool. The tool should be able to simulate latency generically in IP packets, (TCP and UDP) and not be protocol specific.

    Read the article

  • Network Printer Issue.

    - by goldenmean
    Hello, I have a Windows-7 Desktop at office. There is a network printer Dell MFP2335dn which is installed on this dekstop. The printer worked fine for me(I could print from my desktop), sometime back but recently i am not been able to print. When i give a print job, it stays in the queue for a long time, nothing gets printed. When i see the status of the printer in "Devices and Printers", it says - Offline. I removed the printer installed on my Desktop, and tried to install the drivers downloaded from Dell website: http://support.euro.dell.com/support/downloads/download.aspx?c=uk&l=en&s=gen&releaseid=R241894&formatcnt=0&libid=0&typeid=-1&dateid=-1&formatid=-1&source=-1&fileid=349205 But still the same problem. I don't know what to do more to resolve this. Any pointers about how to resolve this error and get printing done. thanks, -AD.

    Read the article

  • Network Server Cabinets - How does the ventilation work?

    - by Nicholas
    Recently I've been looking at a range of network server cabinets with a mesh door at the rear. At the top of the cabinet are ceiling mounted fans with dust filters attached. These fans suck air out of the cabinet - presumably to remove the hot air that has risen to the top. My question is why do these fans have dust filters? What point do they serve? If the air flow is pulled in by these fans through the mesh door, then surely they are not there to protect the hardware inside from dust? Also, there are other minor grilled gaps around the enclosure, how does this kind of ventilation design work?

    Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >