Search Results

Search found 9066 results on 363 pages for 'product'.

Page 118/363 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

  • Sun Ray Hardware Last Order Dates & Extension of Premier Support for Desktop Virtualization Software

    - by Adam Hawley
    In light of the recent announcement  to end new feature development for Oracle Virtual Desktop Infrastructure Software (VDI), Oracle Sun Ray Software (SRS), Oracle Virtual Desktop Client (OVDC) Software, and Oracle Sun Ray Client hardware (3, 3i, and 3 Plus), there have been questions and concerns regarding what this means in terms of customers with new or existing deployments.  The following updates clarify some of these commonly asked questions. Extension of Premier Support for Software Though there will be no new feature additions to these products, customers will have access to maintenance update releases for Oracle Virtual Desktop Infrastructure and Sun Ray Software, including Oracle Virtual Desktop Client and Sun Ray Operating Software (SROS) until Premier Support Ends.  To ensure that customer investments for these products are protected, Oracle  Premier Support for these products has been extended by 3 years to following dates: Sun Ray Software - November 2017 Oracle Virtual Desktop Infrastructure - March 2017 Note that OVDC support is also extended to the above dates since OVDC is licensed by default as part the SRS and VDI products.   As a reminder, this only affects the products listed above.  Oracle Secure Global Desktop and Oracle VM VirtualBox will continue to be enhanced with new features from time-to-time and, as a result, they are not affected by the changes detailed in this message. The extension of support means that customers under a support contract will still be able to file service requests through Oracle Support, and Oracle will continue to provide the utmost level of support to our customers as expected,  until the published Premier Support end date.  Following the end of Premier Support, Sustaining Support remains an 'indefinite' period of time.   Sun Ray 3 Series Clients - Last Order Dates For Sun Ray Client hardware, customers can continue to purchase Sun Ray Client devices until the following last order dates: Product Marketing Part Number Last Order Date Last Ship Date Sun Ray 3 Plus TC3-P0Z-00, TC3-PTZ-00 (TAA) September 13, 2013 February 28, 2014 Sun Ray 3 Client TC3-00Z-00 February 28, 2014 August 31, 2014 Sun Ray 3i Client TC3-I0Z-00 February 28, 2014 August 31, 2014 Payflex Smart Cards X1403A-N, X1404A-N February 28, 2014 August 31, 2014 Note the difference in the Last Order Date for the Sun Ray 3 Plus (September 13, 2013) compared to the other products that have a Last Order Date of February 28, 2014. The rapidly approaching date for Sun Ray 3 Plus is due to a supplier phasing-out production of a key component of the 3 Plus.   Given September 13 is unfortunately quite soon, we strongly encourage you to place your last time buy as soon as possible to maximize Oracle's ability fulfill your order. Keep in mind you can schedule shipments to be delivered as late as the end of February 2014, but the last day to order is September 13, 2013. Customers wishing to purchase other models - Sun Ray 3 Clients and/or Sun Ray 3i Clients - have additional time (until February 28, 2014) to assess their needs and to allow fulfillment of last time orders.  Please note that availability of supply cannot be absolutely guaranteed up to the last order dates and we strongly recommend placing last time buys as early as possible.  Warranty replacements for Sun Ray Client hardware for customers covered by Oracle Hardware Systems Support contracts will be available beyond last order dates, per Oracle's policy found on Oracle.com here.  Per that policy, Oracle intends to provide replacement hardware for up to 5 years beyond the last ship date, but hardware may not be available beyond the 5 year period after the last ship date for reasons beyond Oracle's control. In any case, by design, Sun Ray Clients have an extremely long lifespan  and mean time between failures (MTBF) - much longer than PCs, and over the years we have continued to see first- and second generations of Sun Rays still in daily use.  This is no different for the Sun Ray 3, 3i, and 3 Plus.   Because of this, and in addition to Oracle's continued support for SRS, VDI, and SROS, Sun Ray and Oracle VDI deployments can continue to expand and exist as a viable solution for some time in the future. Continued Availability of Product Licenses and Support Oracle will continue to offer all existing software licenses, and software and hardware support including: Product licenses and Premier Support for Sun Ray Software and Oracle Virtual Desktop Infrastructure Premier Support for Operating Systems (for Sun Ray Operating Software maintenance upgrades/support)  Premier Support for Systems (for Sun Ray Operating Software maintenance upgrades/support and hardware warranty) Support renewals For More Information For more information, please refer to the following documents for specific dates and policies associated with the support of these products: Document 1478170.1 - Oracle Desktop Virtualization Software and Hardware Lifetime Support Schedule Document 1450710.1 - Sun Ray Client Hardware Lifetime schedule Document 1568808.1 - Document Support Policies for Discontinued Oracle Virtual Desktop Infrastructure, Sun Ray Software and Hardware and Oracle Virtual Desktop Client Development For Sales Orders and Questions Please contact your Oracle Sales Representative or Saurabh Vijay ([email protected])

    Read the article

  • How Estimates Became Quotes

    - by Lee Brandt
    It’s our fault. Well, not completely, but we haven’t helped the situation any. All of what follows comes from my own experiences which, from talking to lots of other developers about it, seems to be pretty much par for the course. Where We Started When we first started estimating, we estimated pretty clearly. We would try to imagine something we’d done that was similar to the project being estimated and we’d toss it about in our heads a bit and see how much bigger or smaller we thought this new thing was, and add or subtract accordingly. We wouldn’t spend too much time on it, because we wanted to get to writing the software. Eventually, we’d come across some huge problem that there was now way we could’ve known about ahead of time. Either we didn’t see this thing or, we didn’t realize that this particular version of a problem would be so… problematic. We usually call this “not knowing what we don’t know”. It’s unavoidable. We just can’t know. Until we wade in and start putting some code together, there are just some things we won’t know… and some things we don’t even know that we don’t know. Y’know? So what happens? We go over budget. Project managers scream and dance the dance of the stressed-out project manager, and there is nothing we can do (or could’ve done) about it. We didn’t know. We thought about it for a bit and we didn’t see this herculean task sitting in the middle of our nice quiet project, and it has bitten us in the rear end. We now know how to handle this in the future, though. We will take some more time to pick around the requirements and discover all those things we don’t know. We’ll do some prototyping, we’ll read some blogs about similar projects, we’ll really grill the customer with questions during the requirements gathering phase. We’ll keeping asking “what else?” until the shove us down the stairs. We’ll take our time and uncover it all. We Learned, But Good The next time comes, and you know what happens? We do it. We grill the customer for weeks and prototype and read and research and we estimate everything down to the last button on the last form. Know what that gets us? It gets us three months of wasted time, and our estimate will still be off. Possibly off by a factor of four. WTF, mate? No way we could be surprised by something! We uncovered every particle. We turned every stone. How is it we still came across unknowns? Because we STILL didn’t know what we didn’t know. How could we? We didn’t know to ask. The worst part is, we’ve now convinced the product that this is NOT an estimate. It is a solid number based on massive research and an endless number of questions that they answered. There is absolutely now way you don’t know everything there is to know about this project now. No way there is anything you haven’t uncovered. And their faith in that “Esti-Quote” goes through the roof. When the project goes over this time, they might even begin to question whether or not you know what you’re doing. Who could blame them? You drilled them for weeks about every little thing, and when they complained about all the questions, you told them you wanted to uncover everything so there would be no surprises. SO we set them up to faile Guess, Then Plan We had a chance. At the beginning we could have just said, “That’s just a gut-feeling estimate, based on my past experience with similar projects. There could still be surprises.” If we spend SOME time doing SOME discovery and then bounce that against our own past experiences, we can come up with a fairly healthy estimate. We can then help the product owner understand that an estimate is a guess. Sure, it’s an educated guess, but it is still a guess. If we get it right it will be almost completely luck. Then, we help them to plan the development by taking that guess (yes, they still need the guess for planning purposes) and start measuring early and often to see if we still think we are right. We should adjust the estimate and alert the product owner as soon as we see problems (bad news does not age well) and we should be able to see any problems immediately if we are constantly measuring our pace. In lean software, we start with that guess and begin measuring cycle times immediately. Then we can make projections based on those cycle times and compare them to our estimate. This constant feedback is the best way to ensure that there are no surprises at the END of the project. There sill still be surprises, but we’ll see them sooner and have a better understanding of how they will affect our overall timeline. What do you think?

    Read the article

  • Upgrading Agent Controllers in Oracle Enterprise Manager Ops Center 12c

    - by S Stelting
    Oracle Enterprise Manager Ops Center 12c recently released an upgrade for Solaris Agent Controllers. In this week's blog post, we'll show you how to upgrade agent controllers. Detailed instructions about upgrading Agent Controllers are available in the product documentation here. This blog post uses an Enterprise Controller which is configured for connected mode operation. If you'd like to apply the agent update in a disconnected installation, additional instructions are available here. Step 1: Download Agent Controller Updates With a connected mode Ops Center installation, you can check for product updates at any time by selecting the Enterprise Controller from the left-hand Administration navigation tab. Select the right-hand Action link “Ops Center Downloads” to open a pop-up dialog displaying any new product updates. In this example, the Enterprise Controller has already been upgraded to the latest version (Update 1, also shown as build version 2076) so only the Agent Controller updates will appear. There are three updates available: one for Solaris 10 X86, one for Solaris 8-10 SPARC, and one for all versions of Solaris 11. Note that the last update in the screen shot is the Solaris 11 update; for details on any of the downloads, place your mouse over the information icon under the details column for a pop-up text region. Select the software to download and click the Next button to display the Ops Center license agreement. Review and click the check box to accept the license agreement, then click the Next button to begin downloading the software. The status screen shows the current download status. If desired, you can perform the downloads as a background job. Simply click the check box, then click the next button to proceed to the summary screen. The summary screen shows the updates to be downloaded as well as the current status. Clicking the Finish button will close the dialog and return to the Browser UI. The download job will continue to run in Ops Center and progress can still be viewed from the jobs menu at the bottom of the browser window. Step 2: Check the Version of Existing Agent Controllers After the download job completes, you can check the availability of agent updates as well as the current versions of your Agent Controllers from the left-hand Assets navigation tab. Select “Operating Systems” from the pull-down tab lets to display only OS assets. Next, select “Solaris” in the left-hand tab to display the Solaris assets. Finally, select the Summary tab in the center display panel to show which versions of agent controllers are installed in your data center. Notice that a few of the OS assets are not displayed in the Agent Controllers tab. Ops Center will not display OS instances which do not have an Agent Controller installation. This includes Enterprise Controllers and Proxy Controllers (unless the agent has been activated on the OS instance) and and OS instances using agentless management. For Agent Controllers which support an update, the version of agent software (in this example, 2083) appears to the right of the currently installed version. Step 3: Upgrade Your Agent Controllers If desired, you can upgrade agent controllers from the previous screen by selecting the desired systems and clicking the upgrade button. Alternatively, you can click the link “Upgrade All Agent Controllers” in the right-hand Actions menu: In either case, a pop-up dialog lets you start the upgrade process. The first screen in the dialog lets you choose the upgrade method: Ops Center provides three ways to upgrade agent controllers: Automatic Upgrade: If Agent Controllers are running on all assets, Ops Center can automatically upgrade the software to the latest version without requiring any login credentials to the system SSH using a single set of credentials: If all assets use the same login credentials, you can apply a single set to all assets for the upgrade process. The log-in credentials are the same ones used for asset discovery and management, which are stored in the Plan Management navigation tab under Credentials. SSH using individual credentials: If assets use different login credentials, you can select a different set for each asset. After selecting the upgrade method, click the Next button to proceed to the summary screen. Click the Finish button to close the pop-up dialog and start the upgrade job for the agent controllers. The upgrade job runs a series of tasks in parallel, and will upgrade all agents which have been selected. Once the job completes, the OS instances in your data center will be upgraded and running the latest version of Agent Controller software.

    Read the article

  • A Visual Studio Release Grows in Brooklyn

    - by andrewbrust
    Yesterday, Microsoft held its flagship launch event for Office 2010 in Manhattan.  Today, the Redmond software company is holding a local launch event for Visual Studio (VS) 2010, in Brooklyn.  How come information workers get the 212 treatment and developers are relegated to 718? Well, here’s the thing: the Brooklyn Marriott is actually a great place for an event, but you need some intimate knowledge of New York City to know that.  NBC’s Studio 8H, where the Office launch was held yesterday (and from where SNL is broadcast) is a pretty small venue, but you’d need some inside knowledge to recognize that.  Likewise, while Office 2010 is a product whose value is apparent.  Appreciating VS 2010’s value takes a bit more savvy.  Setting aside its year-based designation, this release of VS, counting the old Visual Basic releases, is the 10th version of the product.  How can a developer audience get excited about an integrated development environment when it reaches double-digit version numbers?  Well, it can be tough.  Luckily, Microsoft sent Jay Schmelzer, a Group Program Manager from the Visual Studio team in Redmond, to come tell the Brooklyn audience why they should be excited. Turns out there’s a lot of reasons.  Support fro SharePoint development is a big one.  In previous versions of VS, that support has been anemic, at best.  Shortage of SharePoint developers is a huge issue in the industry, and this should help.  There’s also built in support for Windows Azure (Microsoft’s cloud platform) and, through a download, support for the forthcoming Windows Phone 7 platform.  ASP.NET MVC, a “close-to-the-metal” Web development option that does away with the Web Forms abstraction layer, has a first-class presence in VS.  So too does jQuery, the Open Source environment that makes JavaScript development a breeze.  The jQuery support is so good that Microsoft now contributes to that Open Source project and offers IntelliSense support for it in the code editor. Speaking of the VS code editor, it now supports multi-monitor setups, zoom-in, and block selection.  If you’re not a developer, this may sound confusing and minute.  I’ll just say that for people who are developers these are little things that really contribute to productivity, and that translates into lower development costs. The really cool demo, though, was around Visual Studio 2010’s new debugging features.  This stuff is hard to showcase, but I believe it’s truly breakthrough technology: imagine being able to step backwards in time to see what might have caused a bug.  Cool?  Now imagine being able to do that, even if you weren’t the tester and weren’t present while the testing was being done.  Then imagine being able to see a video screen capture of what the tester was doing with your app when the bug occurred.  VS 2010 allows all that.  This could be the demise of the IWOMM (“it works on my machine”) syndrome. After the keynote, I asked Schmelzer if any of Microsoft’s competitors have debugging tools that come close to VS 2010’s.  His answer was an earnest “we don’t think so.”  If that’s true, that’s a big deal, and a huge advantage for developer teams who adopt it.  It will make software development much cheaper and more efficient.  Kind of like holding a launch event at the Brooklyn Marriott instead of 30 Rock in Manhattan! VS 2010 (version 10) and Office 2010 (version 14) aren’t the only new product versions Microsoft is releasing right now.  There’s also SQL Server 2008 R2 (version 10.5), Exchange 2010 (version 8, I believe), SharePoint 2010 (version 4) and, of course, Windows 7.  With so many new versions at such levels of maturity, I think it’s fair to say Microsoft has reached middle-age.  How does a company stave off a potential mid-life crisis, especially when with young Turks like Google coming along and competing so fiercely?  Hard to say.  But if focusing on core value, including value that’s hard to play into a sexy demo, is part oft the answer, then Microsoft’s doing OK.  And if some new tricks, like Windows Phone 7, can gain some traction, that might round things out nicely. Are the legacy products old tricks, or are they revised classics?  I honestly don’t know, because it’s the market’s prerogative to pass that judgement.  I can say this though: based on today’s show, I think Microsoft’s been doing its homework.

    Read the article

  • Best Method For Evaluating Existing Software or New Software

    How many of us have been faced with having to decide on an off-the-self or a custom built component, application, or solution to integrate in to an existing system or to be the core foundation of a new system? What is the best method for evaluating existing software or new software still in the design phase? One of the industry preferred methodologies to use is the Active Reviews for Intermediate Designs (ARID) evaluation process.  ARID is a hybrid mixture of the Active Design Review (ADR) methodology and the Architectural Tradeoff Analysis Method (ATAM). So what is ARID? ARD’s main goal is to ensure quality, detailed designs in software. One way in which it does this is by empowering reviewers by assigning generic open ended survey questions. This approach attempts to remove the possibility for allowing the standard answers such as “Yes” or “No”. The ADR process ignores the “Yes”/”No” questions due to the fact that they can be leading based on how the question is asked. Additionally these questions tend to receive less thought in comparison to more open ended questions. Common Active Design Review Questions What possible exceptions can occur in this component, application, or solution? How should exceptions be handled in this component, application, or solution? Where should exceptions be handled in this component, application, or solution? How should the component, application, or solution flow based on the design? What is the maximum execution time for every component, application, or solution? What environments can this component, application, or solution? What data dependencies does this component, application, or solution have? What kind of data does this component, application, or solution require? Ok, now I know what ARID is, how can I apply? Let’s imagine that your organization is going to purchase an off-the-shelf (OTS) solution for its customer-relationship management software. What process would we use to ensure that the correct purchase is made? If we use ARID, then we will have a series of 9 steps broken up by 2 phases in order to ensure that the correct OTS solution is purchases. Phase 1 Identify the Reviewers Prepare the Design Briefing Prepare the Seed Scenarios Prepare the Materials When identifying reviewers for a design it is preferred that they be pulled from a candidate pool comprised of developers that are going to implement the design. The believe is that developers actually implementing the design will have more a vested interest in ensuring that the design is correct prior to the start of code. Design debriefing consist of a summary of the design, examples of the design solving real world examples put in to use and should be no longer than two hours typically. The primary goal of this briefing is to adequately summarize the design so that the review members could actually implement the design. In the example of purchasing an OTS product I would attempt to review my briefing prior to its distribution with the review facilitator to ensure that nothing was excluded that should have not been. This practice will also allow me to test the length of the briefing to ensure that can be delivered in an appropriate about of time. Seed Scenarios are designed to illustrate conceptualized scenarios when applied with a set of sample data. These scenarios can then be used by the reviewers in the actual evaluation of the software, All materials needed for the evaluation should be prepared ahead of time so that they can be reviewed prior to and during the meeting. Materials Included: Presentation Seed Scenarios Review Agenda Phase 2 Present ARID Present Design Brainstorm and prioritize scenarios Apply scenarios Summarize Prior to the start of any ARID review meeting the Facilitator should define the remaining steps of ARID so that all the participants know exactly what they are doing prior to the start of the review process. Once the ARID rules have been laid out, then the lead designer presents an overview of the design which typically takes about two hours. During this time no questions about the design or rational are allowed to be asked by the review panel as a standard, but they are written down for use latter in the process. After the presentation the list of compiled questions is then summarized and sent back to the lead designer as areas that need to be addressed further. In the example of purchasing an OTS product issues could arise regarding security, the implementation needed or even if this is this the correct product to solve the needed solution. After the Design presentation a brainstorming and prioritize scenarios process begins by reducing the seed scenarios down to just the highest priority scenarios.  These will then be used to test the design for suitability. Once the selected scenarios have been defined the reviewers apply the examples provided in the presentation to the scenarios. The intended output of this process is to provide code or pseudo code that makes use of the examples provided while solving the selected seed scenarios. As a standard rule, the designers of the systems are not allowed to help the review board unless they all become stuck. When this occurs it is documented and along with the reason why the designer needed to help the review panel back on track. Once all of the scenarios have been completed the review facilitator reviews with the group issues that arise during the process. Then the reviewers will be polled as to efficacy of the review experience. References: Clements, Paul., Kazman, Rick., Klien, Mark. (2002). Evaluating Software Architectures: Methods and Case Studies Indianapolis, IN: Addison-Wesley

    Read the article

  • SPARC T4-4 Delivers World Record Performance on Oracle OLAP Perf Version 2 Benchmark

    - by Brian
    Oracle's SPARC T4-4 server delivered world record performance with subsecond response time on the Oracle OLAP Perf Version 2 benchmark using Oracle Database 11g Release 2 running on Oracle Solaris 11. The SPARC T4-4 server achieved throughput of 430,000 cube-queries/hour with an average response time of 0.85 seconds and the median response time of 0.43 seconds. This was achieved by using only 60% of the available CPU resources leaving plenty of headroom for future growth. The SPARC T4-4 server operated on an Oracle OLAP cube with a 4 billion row fact table of sales data containing 4 dimensions. This represents as many as 90 quintillion aggregate rows (90 followed by 18 zeros). Performance Landscape Oracle OLAP Perf Version 2 Benchmark 4 Billion Fact Table Rows System Queries/hour Users* Response Time (sec) Average Median SPARC T4-4 430,000 7,300 0.85 0.43 * Users - the supported number of users with a given think time of 60 seconds Configuration Summary and Results Hardware Configuration: SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 1 TB memory Data Storage 1 x Sun Fire X4275 (using COMSTAR) 2 x Sun Storage F5100 Flash Array (each with 80 FMODs) Redo Storage 1 x Sun Fire X4275 (using COMSTAR with 8 HDD) Software Configuration: Oracle Solaris 11 11/11 Oracle Database 11g Release 2 (11.2.0.3) with Oracle OLAP option Benchmark Description The Oracle OLAP Perf Version 2 benchmark is a workload designed to demonstrate and stress the Oracle OLAP product's core features of fast query, fast update, and rich calculations on a multi-dimensional model to support enhanced Data Warehousing. The bulk of the benchmark entails running a number of concurrent users, each issuing typical multidimensional queries against an Oracle OLAP cube consisting of a number of years of sales data with fully pre-computed aggregations. The cube has four dimensions: time, product, customer, and channel. Each query user issues approximately 150 different queries. One query chain may ask for total sales in a particular region (e.g South America) for a particular time period (e.g. Q4 of 2010) followed by additional queries which drill down into sales for individual countries (e.g. Chile, Peru, etc.) with further queries drilling down into individual stores, etc. Another query chain may ask for yearly comparisons of total sales for some product category (e.g. major household appliances) and then issue further queries drilling down into particular products (e.g. refrigerators, stoves. etc.), particular regions, particular customers, etc. Results from version 2 of the benchmark are not comparable with version 1. The primary difference is the type of queries along with the query mix. Key Points and Best Practices Since typical BI users are often likely to issue similar queries, with different constants in the where clauses, setting the init.ora prameter "cursor_sharing" to "force" will provide for additional query throughput and a larger number of potential users. Except for this setting, together with making full use of available memory, out of the box performance for the OLAP Perf workload should provide results similar to what is reported here. For a given number of query users with zero think time, the main measured metrics are the average query response time, the median query response time, and the query throughput. A derived metric is the maximum number of users the system can support achieving the measured response time assuming some non-zero think time. The calculation of the maximum number of users follows from the well-known response-time law N = (rt + tt) * tp where rt is the average response time, tt is the think time and tp is the measured throughput. Setting tt to 60 seconds, rt to 0.85 seconds and tp to 119.44 queries/sec (430,000 queries/hour), the above formula shows that the T4-4 server will support 7,300 concurrent users with a think time of 60 seconds and an average response time of 0.85 seconds. For more information see chapter 3 from the book "Quantitative System Performance" cited below. -- See Also Quantitative System Performance Computer System Analysis Using Queueing Network Models Edward D. Lazowska, John Zahorjan, G. Scott Graham, Kenneth C. Sevcik external local Oracle Database 11g – Oracle OLAP oracle.com OTN SPARC T4-4 Server oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 11/2/2012.

    Read the article

  • Xobni Plus for Outlook [Review]

    - by The Geek
    Overview Xobni Plus is an addin that will bring a sidebar to Outlook which allows you to search through your inbox and contacts a lot easier. It provides the ability to search and keep track of your favorite social networks. Searching with Xobni is a lot more powerful than the default search feature in Outlook. It let’s you drill down your searches to conversations, email, links, and attachments. It now supports Outlook 2010 both 32 & 64-bit versions. Installation & Setup Installation is easy following the wizard. After completing the wizard you can tell you’re friends on Facebook and Twitter that you are now using it. You can also decide to join their Product Improvement Program if you want. After installation when you open Outlook, Xobni appears as a sidebar on the right side. Don’t worry about it always being in the way, as you can hide it if you need more room for other Outlook functions. After Xobni free is installed, you can upgrade to the Plus version at any time. A new window will open up and you can use your Credit Card, PayPal, or redeem a code if you have one. Features & Use Where to begin with the amount of features available in Xobni Plus? It really has an amazing amount of cool features. Of course you’ll have all of the features of the Free Version which we previously covered…and a lot more. After Xobni is installed you’ll notice a section for it on the Ribbon. From here you can search Xobni, show or hide the Sidebar, and change other options. It allows you to easily keep up with various social networks like Facebook, Twitter, and LinkedIn… Check out email analytics and contact ranks. Click on the Files Exchanged tab to search for specific attachments. Quickly search links exchanged with your contacts. Hover over a link to get a preview of what it entails. It gives you the ability to index all of your Yahoo mail as well, without the need for purchasing Yahoo Plus! Then your Yahoo messages appear in the Xobni sidebar. When you select a contact you can see related messages from you Yahoo account. Easily index all of your mail…including Yahoo mail for better organization and faster search results. There are several options you can select to change the way Xobni works. From setting up your Yahoo email, Indexing options, and much more. Additional Features of Xobni Plus Advanced Search Capabilities – Filter results, Boolean & Phrase Search, Ability to search Appointments & Tasks, Advanced Search Builder Search unlimited PST data files Xobni contacts in the compose screen Find links exchanged with your contacts View calendar appointments One year premium tech support No Ads! Performance We ran Xobni Plus on Outlook 2010 32-bit on a Dual-Core AMD Athlon system with 4GB of RAM and found it to run quite smoothly. However, we did notice it would sometimes slow down launching Outlook, especially if other apps are running at the same time. Product Support When you buy a license for Xobni Plus you get a full year of premium tech support. They provide a Questions and Answers page on their site where you can run a search query and answers appear instantly. You can contact support directly as a Plus member through their web form and they advise the turn around time is 2 business days. However, when we tested it, we received a response within 24 hours. They also provide FAQ, Community forum, and you can download the Owners Manual in PDF format from the support page. Conclusion Xobni Plus is a very powerful addin for Outlook and includes a lot more features that we didn’t cover in this review. You can download Xobni free edition which includes an 8 day free trial of the Plus version. This provides a good way to start getting familiar with it. Then upgrade to Xobni Plus at any time for $29.95. Once you get started, you’ll find the sidebar is nicely laid out and intuitive to use. If you live out of Outlook during the day, Xobni Plus is a great addition for fast and powerful searches. It provides an easy way to keep all of your contacts and messages well organized and easy to find. Xobni Plus works with XP, Vista, and Windows 7 (32 & 64-bit editions) Outlook 2003, 2007 and both 32 & 64-bit editions of Outlook 2010. Download Xobni Plus Download Xobni Free Edition Rating Installation: 8 Ease of Use: 8 Features: 9 Performance: 8 Product Support: 8 Similar Articles Productive Geek Tips Xobni Free Powers Up Outlook’s Search and ContactsCreate an Email Template in Outlook 2003Add Social Elements to Your Gmail Contacts with RapportiveChange Outlook Startup FolderClear Outlook Searches and MRU (Most Recently Used) Lists TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides

    Read the article

  • Provocative Tweets From the Dachis Social Business Summit

    - by Mike Stiles
    On June 20, all who follow social business and how social is changing how we do business and internal business structures, gathered in London for the Dachis Social Business Summit. In addition to Oracle SVP Product Development, Reggie Bradford, brands and thought leaders posed some thought-provoking ideas and figures. Here are some of the most oft-tweeted points, and our thoughts that they provoked. Tweet: The winners will be those who use data to improve performance.Thought: Everyone is dwelling on ROI. Why isn’t everyone dwelling on the opportunity to make their product or service better (as if that doesn’t have an effect on ROI)? Big data can improve you…let it. Tweet: High performance hinges on integrated teams that interact with each other.Thought: Team members may work well with each other, but does the team as a whole “get” what other teams are doing? That’s the key to an integrated, companywide workforce. (Internal social platforms can facilitate that by the way). Tweet: Performance improvements come from making the invisible visible.Thought: Many of the factors that drive customer behavior and decisions are invisible. Through social, customers are now showing us what we couldn’t see before…if we’re paying attention. Tweet: Games have continuous feedback, which is why they’re so engaging.  Apply that to business operations.Thought: You think your employees have an obligation to be 100% passionate and engaged at all times about making you richer. Think again. Like customers, they must be motivated. Visible insight that they’re advancing on their goals helps. Tweet: Who can add value to the data?  Data will tend to migrate to where it will be most effective.Thought: Not everybody needs all the data. One team will be able to make sense of, use, and add value to data that may be irrelevant to another team. Like a strategized football play, the data has to get sent to the spot on the field where it’s needed most. Tweet: The sale isn’t the light at the end of the tunnel, it’s the start of a new marketing cycle.Thought: Another reason the ROI question is fundamentally flawed. The sale is not the end of the potential return on investment. After-the-sale service and nurturing begins where the sales “victory” ends. Tweet: A dead sale is one that’s not shared.  People must be incentivized to share.Thought: Guess what, customers now know their value to you as marketers on your behalf. They’ll tell people about your product, but you’ve got to answer, “Why should I?” And you’ve got to answer it with something substantial, not lame trinkets. Tweet: Social user motivations are competition, affection, excellence and curiosity.Thought: Your followers will engage IF; they can get something for doing it, love your culture so much they want you to win, are consistently stunned at the perfection and coolness of your products, or have been stimulated enough to want to know more. Tweet: In Europe, 92% surveyed said they couldn’t care less about brands.Thought: Oh well, so much for loving you or being impressed enough with your products & service that they want you to win. We’ve got a long way to go. Tweet: A complaint is a gift.Thought: Our instinct where complaints are concerned is to a) not listen, b) dismiss the one who complains as a kook, c) make excuses, and d) reassure ourselves with internal group-think that they’re wrong and we’re right. It’s the perfect recipe for how to never, ever grow or get better. In a way, this customer cares more than you do. Tweet: 78% of consumers think peer recommendation is the best form of advertising.  Eventually, engagement is going to eat advertising.Thought: Why is peer recommendation best? Trust. If a friend tells me how great a movie was, I believe him. He has credibility with me. He’s seen it, and he could care less if I buy a ticket. He’s telling me it was awesome because he sincerely believes that it was.  That’s gold. Tweet: 86% of customers are willing to pay more for a better customer experience. Thought: This “how mad can we make our customers without losing them” strategy has to end. The customer experience has actual monetary value, money you’re probably leaving on the table. @mikestilesPhoto: stock.xchng

    Read the article

  • Customer Perspectives: Oracle Data Integrator

    - by Julien Testut
    Normal 0 false false false EN-US X-NONE X-NONE The Data Integration Product Management team will be hosting a customer panel session dedicated to Oracle Data Integrator at Oracle OpenWorld. I will have the pleasure to present this session with three of our customers: Paychex, Ross Stores and Turkcell. In this session, you will hear how Paychex, Ross Stores and Turkcell utilize Oracle Data Integrator to meet their IT and business needs. Our customers will be able to share with you how they use ODI in their environments, best practices, lessons learned and benefits of implementing Oracle Data Integrator. If you're interested in hearing more about how our customers use Oracle Data Integrator then I recommend attending this session: Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Customer Perspectives: Oracle Data Integrator Wednesday October, 3rd, 1:15PM - 2:15PM Marriott Marquis – Golden Gate C3 v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} The Data Integration track at OpenWorld covers variety of topics and speakers. In addition to product management of Oracle GoldenGate, Oracle Data Integrator, and Enteprise Data Quality presenting product updates and roadmap, we have several customer panels and stand-alone sessions featuring select customers such as St. Jude Medical, Raymond James, Aderas, Turkcell, Paychex, Comcast, Ticketmaster, Bank of America and more. You can see an overview of Data Integration sessions here.  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} If you are not able to attend OpenWorld, please check out our latest resources for Data Integration and Oracle GoldenGate. In the coming weeks you will see more blogs about our products’ new capabilities and what to expect at OpenWorld. We hope to see you at OpenWorld and stay in touch via our future blogs. v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • State of the (Commerce) Union: What the healthcare.gov hiccups teach us about the commerce customer experience

    - by Katrina Gosek
    Guest Post by Brenna Johnson, Oracle Commerce Product A lot has been said about the healthcare.gov debacle in the last week. Regardless of your feelings about the Affordable Care Act, there’s a hidden issue in this story that most of the American people don’t understand: delivering a great commerce customer experience (CX) is hard. It shouldn’t be, but it is. The reality of the government’s issues getting the healthcare site up and running smooth is something we in the online commerce community know too well.  If there’s one thing the botched launch of the site has taught us, it’s that regardless of the size of your budget or the power of an executive with a high-profile project, some of the biggest initiatives with the most attention (and the most at stake) don’t go as planned. It may even give you a moment of solace – we have the same issues! But why?  Organizations engage too many separate vendors with different technologies, running sections or pieces of a site to get live. When things go wrong, it takes time to identify the problem – and who or what is at the center of it. Unfortunately, this is a brittle way of setting up a site, making it susceptible to breaks, bugs, and scaling issues. But, it’s the reality of running a site with legacy technology constraints in today’s demanding, customer-centric market. This approach also means there’s also a lot of cooks in lots of different kitchens. You’ve got development and IT, the business and the marketing team, an external Systems Integrator to bring it all together, a digital agency or consultant, QA, product experts, 3rd party suppliers, and the list goes on. To complicate things, different business units are held responsible for different pieces of the site and managing different technologies. And again – due to legacy organizational structure and processes, this is all accepted as the normal State of the Union. Digital commerce has been commonplace for 15 years. Yet, getting a site live, maintained and performing requires orchestrating a cast of thousands (or at least, dozens), big dollars, and some finger-crossing. But it shouldn’t. The great thing about the advent of mobile commerce and the continued maturity of online commerce is that it’s forced organizations to think from the outside, in. Consumers – whether they’re shopping for shoes or a new healthcare plan – don’t care about what technology issues or processes you have behind the scenes. They just want it to work.  They want their experience to be easy, fast, and tailored to them and their needs – whatever they are. This doesn’t sound like a tall order to the American consumer – especially since they interact with sites that do work smoothly.  But the reality is that it takes scores of people, teams, check-ins, late nights, testing, and some good luck to get sites to run, and even more so at Black Friday (or October 1st) traffic levels.  The last thing on a customer’s mind is making excuses for why they can’t buy a product – just get it to work. So what is the government doing? My guess is working day and night to get the site performing  - and having to throw big money at the problem. In the meantime they’re sending frustrated online users to the call center, or even a location where a trained “navigator” can help them in-person to complete their selection. Sounds a lot like multichannel commerce (where broken communication between siloed touchpoints will only frustrate the consumer more). One thing we’ve learned is that consumers spend their time and money with brands they know and trust. When sites are easy to use and adapt to their needs, they tend to spend more, come back, and even become long-time loyalists. Achieving this may require moving internal mountains, but there’s too much at stake to ignore the sea change in how organizations are thinking about their customer. If the thought of re-thinking your internal teams, technologies, and processes sounds like a headache, think about the pain associated with losing valuable customers – and dollars. Regardless if you’re in B2B or B2C, it’s guaranteed that your competitors are making CX a priority. Those early to the game who have made CX a priority have already begun to outpace their competition. So as you’re planning for 2014, look to the news this week. Make sure the customer experience is a focus at your organization. Expectations are at record highs. Map your customer’s journey, and think from the outside, in. How easy is it for your customers to do business with you? If they interact with many touchpoints across your organization, are the call center, website, mobile environment, or brick and mortar location in sync? Do you have the technology in place to achieve this? It’s time to give the people what they want!

    Read the article

  • jQuery Globalization Plugin from Microsoft

    - by ScottGu
    Last month I blogged about how Microsoft is starting to make code contributions to jQuery, and about some of the first code contributions we were working on: jQuery Templates and Data Linking support. Today, we released a prototype of a new jQuery Globalization Plugin that enables you to add globalization support to your JavaScript applications. This plugin includes globalization information for over 350 cultures ranging from Scottish Gaelic, Frisian, Hungarian, Japanese, to Canadian English.  We will be releasing this plugin to the community as open-source. You can download our prototype for the jQuery Globalization plugin from our Github repository: http://github.com/nje/jquery-glob You can also download a set of samples that demonstrate some simple use-cases with it here. Understanding Globalization The jQuery Globalization plugin enables you to easily parse and format numbers, currencies, and dates for different cultures in JavaScript. For example, you can use the Globalization plugin to display the proper currency symbol for a culture: You also can use the Globalization plugin to format dates so that the day and month appear in the right order and the day and month names are correctly translated: Notice above how the Arabic year is displayed as 1431. This is because the year has been converted to use the Arabic calendar. Some cultural differences, such as different currency or different month names, are obvious. Other cultural differences are surprising and subtle. For example, in some cultures, the grouping of numbers is done unevenly. In the "te-IN" culture (Telugu in India), groups have 3 digits and then 2 digits. The number 1000000 (one million) is written as "10,00,000". Some cultures do not group numbers at all. All of these subtle cultural differences are handled by the jQuery Globalization plugin automatically. Getting dates right can be especially tricky. Different cultures have different calendars such as the Gregorian and UmAlQura calendars. A single culture can even have multiple calendars. For example, the Japanese culture uses both the Gregorian calendar and a Japanese calendar that has eras named after Japanese emperors. The Globalization Plugin includes methods for converting dates between all of these different calendars. Using Language Tags The jQuery Globalization plugin uses the language tags defined in the RFC 4646 and RFC 5646 standards to identity cultures (see http://tools.ietf.org/html/rfc5646). A language tag is composed out of one or more subtags separated by hyphens. For example: Language Tag Language Name (in English) en-AU English (Australia) en-BZ English (Belize) en-CA English (Canada) Id Indonesian zh-CHS Chinese (Simplified) Legacy Zu isiZulu Notice that a single language, such as English, can have several language tags. Speakers of English in Canada format numbers, currencies, and dates using different conventions than speakers of English in Australia or the United States. You can find the language tag for a particular culture by using the Language Subtag Lookup tool located here:  http://rishida.net/utils/subtags/ The jQuery Globalization plugin download includes a folder named globinfo that contains the information for each of the 350 cultures. Actually, this folder contains more than 700 files because the folder includes both minified and un-minified versions of each file. For example, the globinfo folder includes JavaScript files named jQuery.glob.en-AU.js for English Australia, jQuery.glob.id.js for Indonesia, and jQuery.glob.zh-CHS for Chinese (Simplified) Legacy. Example: Setting a Particular Culture Imagine that you have been asked to create a German website and want to format all of the dates, currencies, and numbers using German formatting conventions correctly in JavaScript on the client. The HTML for the page might look like this: Notice the span tags above. They mark the areas of the page that we want to format with the Globalization plugin. We want to format the product price, the date the product is available, and the units of the product in stock. To use the jQuery Globalization plugin, we’ll add three JavaScript files to the page: the jQuery library, the jQuery Globalization plugin, and the culture information for a particular language: In this case, I’ve statically added the jQuery.glob.de-DE.js JavaScript file that contains the culture information for German. The language tag “de-DE” is used for German as spoken in Germany. Now that I have all of the necessary scripts, I can use the Globalization plugin to format the product price, date available, and units in stock values using the following client-side JavaScript: The jQuery Globalization plugin extends the jQuery library with new methods - including new methods named preferCulture() and format(). The preferCulture() method enables you to set the default culture used by the jQuery Globalization plugin methods. Notice that the preferCulture() method accepts a language tag. The method will find the closest culture that matches the language tag. The $.format() method is used to actually format the currencies, dates, and numbers. The second parameter passed to the $.format() method is a format specifier. For example, passing “c” causes the value to be formatted as a currency. The ReadMe file at github details the meaning of all of the various format specifiers: http://github.com/nje/jquery-glob When we open the page in a browser, everything is formatted correctly according to German language conventions. A euro symbol is used for the currency symbol. The date is formatted using German day and month names. Finally, a period instead of a comma is used a number separator: You can see a running example of the above approach with the 3_GermanSite.htm file in this samples download. Example: Enabling a User to Dynamically Select a Culture In the previous example we explicitly said that we wanted to globalize in German (by referencing the jQuery.glob.de-DE.js file). Let’s now look at the first of a few examples that demonstrate how to dynamically set the globalization culture to use. Imagine that you want to display a dropdown list of all of the 350 cultures in a page. When someone selects a culture from the dropdown list, you want all of the dates in the page to be formatted using the selected culture. Here’s the HTML for the page: Notice that all of the dates are contained in a <span> tag with a data-date attribute (data-* attributes are a new feature of HTML 5 that conveniently also still work with older browsers). We’ll format the date represented by the data-date attribute when a user selects a culture from the dropdown list. In order to display dates for any possible culture, we’ll include the jQuery.glob.all.js file like this: The jQuery Globalization plugin includes a JavaScript file named jQuery.glob.all.js. This file contains globalization information for all of the more than 350 cultures supported by the Globalization plugin.  At 367KB minified, this file is not small. Because of the size of this file, unless you really need to use all of these cultures at the same time, we recommend that you add the individual JavaScript files for particular cultures that you intend to support instead of the combined jQuery.glob.all.js to a page. In the next sample I’ll show how to dynamically load just the language files you need. Next, we’ll populate the dropdown list with all of the available cultures. We can use the $.cultures property to get all of the loaded cultures: Finally, we’ll write jQuery code that grabs every span element with a data-date attribute and format the date: The jQuery Globalization plugin’s parseDate() method is used to convert a string representation of a date into a JavaScript date. The plugin’s format() method is used to format the date. The “D” format specifier causes the date to be formatted using the long date format. And now the content will be globalized correctly regardless of which of the 350 languages a user visiting the page selects.  You can see a running example of the above approach with the 4_SelectCulture.htm file in this samples download. Example: Loading Globalization Files Dynamically As mentioned in the previous section, you should avoid adding the jQuery.glob.all.js file to a page whenever possible because the file is so large. A better alternative is to load the globalization information that you need dynamically. For example, imagine that you have created a dropdown list that displays a list of languages: The following jQuery code executes whenever a user selects a new language from the dropdown list. The code checks whether the globalization file associated with the selected language has already been loaded. If the globalization file has not been loaded then the globalization file is loaded dynamically by taking advantage of the jQuery $.getScript() method. The globalizePage() method is called after the requested globalization file has been loaded, and contains the client-side code to perform the globalization. The advantage of this approach is that it enables you to avoid loading the entire jQuery.glob.all.js file. Instead you only need to load the files that you need and you don’t need to load the files more than once. The 5_Dynamic.htm file in this samples download demonstrates how to implement this approach. Example: Setting the User Preferred Language Automatically Many websites detect a user’s preferred language from their browser settings and automatically use it when globalizing content. A user can set a preferred language for their browser. Then, whenever the user requests a page, this language preference is included in the request in the Accept-Language header. When using Microsoft Internet Explorer, you can set your preferred language by following these steps: Select the menu option Tools, Internet Options. Select the General tab. Click the Languages button in the Appearance section. Click the Add button to add a new language to the list of languages. Move your preferred language to the top of the list. Notice that you can list multiple languages in the Language Preference dialog. All of these languages are sent in the order that you listed them in the Accept-Language header: Accept-Language: fr-FR,id-ID;q=0.7,en-US;q=0.3 Strangely, you cannot retrieve the value of the Accept-Language header from client JavaScript. Microsoft Internet Explorer and Mozilla Firefox support a bevy of language related properties exposed by the window.navigator object, such as windows.navigator.browserLanguage and window.navigator.language, but these properties represent either the language set for the operating system or the language edition of the browser. These properties don’t enable you to retrieve the language that the user set as his or her preferred language. The only reliable way to get a user’s preferred language (the value of the Accept-Language header) is to write server code. For example, the following ASP.NET page takes advantage of the server Request.UserLanguages property to assign the user’s preferred language to a client JavaScript variable named acceptLanguage (which then allows you to access the value using client-side JavaScript): In order for this code to work, the culture information associated with the value of acceptLanguage must be included in the page. For example, if someone’s preferred culture is fr-FR (French in France) then you need to include either the jQuery.glob.fr-FR.js or the jQuery.glob.all.js JavaScript file in the page or the culture information won’t be available.  The “6_AcceptLanguages.aspx” sample in this samples download demonstrates how to implement this approach. If the culture information for the user’s preferred language is not included in the page then the $.preferCulture() method will fall back to using the neutral culture (for example, using jQuery.glob.fr.js instead of jQuery.glob.fr-FR.js). If the neutral culture information is not available then the $.preferCulture() method falls back to the default culture (English). Example: Using the Globalization Plugin with the jQuery UI DatePicker One of the goals of the Globalization plugin is to make it easier to build jQuery widgets that can be used with different cultures. We wanted to make sure that the jQuery Globalization plugin could work with existing jQuery UI plugins such as the DatePicker plugin. To that end, we created a patched version of the DatePicker plugin that can take advantage of the Globalization plugin when rendering a calendar. For example, the following figure illustrates what happens when you add the jQuery Globalization and the patched jQuery UI DatePicker plugin to a page and select Indonesian as the preferred culture: Notice that the headers for the days of the week are displayed using Indonesian day name abbreviations. Furthermore, the month names are displayed in Indonesian. You can download the patched version of the jQuery UI DatePicker from our github website. Or you can use the version included in this samples download and used by the 7_DatePicker.htm sample file. Summary I’m excited about our continuing participation in the jQuery community. This Globalization plugin is the third jQuery plugin that we’ve released. We’ve really appreciated all of the great feedback and design suggestions on the jQuery templating and data-linking prototypes that we released earlier this year.  We also want to thank the jQuery and jQuery UI teams for working with us to create these plugins. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. You can follow me at: twitter.com/scottgu

    Read the article

  • Oracle BI Server Modeling, Part 1- Designing a Query Factory

    - by bob.ertl(at)oracle.com
      Welcome to Oracle BI Development's BI Foundation blog, focused on helping you get the most value from your Oracle Business Intelligence Enterprise Edition (BI EE) platform deployments.  In my first series of posts, I plan to show developers the concepts and best practices for modeling in the Common Enterprise Information Model (CEIM), the semantic layer of Oracle BI EE.  In this segment, I will lay the groundwork for the modeling concepts.  First, I will cover the big picture of how the BI Server fits into the system, and how the CEIM controls the query processing. Oracle BI EE Query Cycle The purpose of the Oracle BI Server is to bridge the gap between the presentation services and the data sources.  There are typically a variety of data sources in a variety of technologies: relational, normalized transaction systems; relational star-schema data warehouses and marts; multidimensional analytic cubes and financial applications; flat files, Excel files, XML files, and so on. Business datasets can reside in a single type of source, or, most of the time, are spread across various types of sources. Presentation services users are generally business people who need to be able to query that set of sources without any knowledge of technologies, schemas, or how sources are organized in their company. They think of business analysis in terms of measures with specific calculations, hierarchical dimensions for breaking those measures down, and detailed reports of the business transactions themselves.  Most of them create queries without knowing it, by picking a dashboard page and some filters.  Others create their own analysis by selecting metrics and dimensional attributes, and possibly creating additional calculations. The BI Server bridges that gap from simple business terms to technical physical queries by exposing just the business focused measures and dimensional attributes that business people can use in their analyses and dashboards.   After they make their selections and start the analysis, the BI Server plans the best way to query the data sources, writes the optimized sequence of physical queries to those sources, post-processes the results, and presents them to the client as a single result set suitable for tables, pivots and charts. The CEIM is a model that controls the processing of the BI Server.  It provides the subject areas that presentation services exposes for business users to select simplified metrics and dimensional attributes for their analysis.  It models the mappings to the physical data access, the calculations and logical transformations, and the data access security rules.  The CEIM consists of metadata stored in the repository, authored by developers using the Administration Tool client.     Presentation services and other query clients create their queries in BI EE's SQL-92 language, called Logical SQL or LSQL.  The API simply uses ODBC or JDBC to pass the query to the BI Server.  Presentation services writes the LSQL query in terms of the simplified objects presented to the users.  The BI Server creates a query plan, and rewrites the LSQL into fully-detailed SQL or other languages suitable for querying the physical sources.  For example, the LSQL on the left below was rewritten into the physical SQL for an Oracle 11g database on the right. Logical SQL   Physical SQL SELECT "D0 Time"."T02 Per Name Month" saw_0, "D4 Product"."P01  Product" saw_1, "F2 Units"."2-01  Billed Qty  (Sum All)" saw_2 FROM "Sample Sales" ORDER BY saw_0, saw_1       WITH SAWITH0 AS ( select T986.Per_Name_Month as c1, T879.Prod_Dsc as c2,      sum(T835.Units) as c3, T879.Prod_Key as c4 from      Product T879 /* A05 Product */ ,      Time_Mth T986 /* A08 Time Mth */ ,      FactsRev T835 /* A11 Revenue (Billed Time Join) */ where ( T835.Prod_Key = T879.Prod_Key and T835.Bill_Mth = T986.Row_Wid) group by T879.Prod_Dsc, T879.Prod_Key, T986.Per_Name_Month ) select SAWITH0.c1 as c1, SAWITH0.c2 as c2, SAWITH0.c3 as c3 from SAWITH0 order by c1, c2   Probably everybody reading this blog can write SQL or MDX.  However, the trick in designing the CEIM is that you are modeling a query-generation factory.  Rather than hand-crafting individual queries, you model behavior and relationships, thus configuring the BI Server machinery to manufacture millions of different queries in response to random user requests.  This mass production requires a different mindset and approach than when you are designing individual SQL statements in tools such as Oracle SQL Developer, Oracle Hyperion Interactive Reporting (formerly Brio), or Oracle BI Publisher.   The Structure of the Common Enterprise Information Model (CEIM) The CEIM has a unique structure specifically for modeling the relationships and behaviors that fill the gap from logical user requests to physical data source queries and back to the result.  The model divides the functionality into three specialized layers, called Presentation, Business Model and Mapping, and Physical, as shown below. Presentation services clients can generally only see the presentation layer, and the objects in the presentation layer are normally the only ones used in the LSQL request.  When a request comes into the BI Server from presentation services or another client, the relationships and objects in the model allow the BI Server to select the appropriate data sources, create a query plan, and generate the physical queries.  That's the left to right flow in the diagram below.  When the results come back from the data source queries, the right to left relationships in the model show how to transform the results and perform any final calculations and functions that could not be pushed down to the databases.   Business Model Think of the business model as the heart of the CEIM you are designing.  This is where you define the analytic behavior seen by the users, and the superset library of metric and dimension objects available to the user community as a whole.  It also provides the baseline business-friendly names and user-readable dictionary.  For these reasons, it is often called the "logical" model--it is a virtual database schema that persists no data, but can be queried as if it is a database. The business model always has a dimensional shape (more on this in future posts), and its simple shape and terminology hides the complexity of the source data models. Besides hiding complexity and normalizing terminology, this layer adds most of the analytic value, as well.  This is where you define the rich, dimensional behavior of the metrics and complex business calculations, as well as the conformed dimensions and hierarchies.  It contributes to the ease of use for business users, since the dimensional metric definitions apply in any context of filters and drill-downs, and the conformed dimensions enable dashboard-wide filters and guided analysis links that bring context along from one page to the next.  The conformed dimensions also provide a key to hiding the complexity of many sources, including federation of different databases, behind the simple business model. Note that the expression language in this layer is LSQL, so that any expression can be rewritten into any data source's query language at run time.  This is important for federation, where a given logical object can map to several different physical objects in different databases.  It is also important to portability of the CEIM to different database brands, which is a key requirement for Oracle's BI Applications products. Your requirements process with your user community will mostly affect the business model.  This is where you will define most of the things they specifically ask for, such as metric definitions.  For this reason, many of the best-practice methodologies of our consulting partners start with the high-level definition of this layer. Physical Model The physical model connects the business model that meets your users' requirements to the reality of the data sources you have available. In the query factory analogy, think of the physical layer as the bill of materials for generating physical queries.  Every schema, table, column, join, cube, hierarchy, etc., that will appear in any physical query manufactured at run time must be modeled here at design time. Each physical data source will have its own physical model, or "database" object in the CEIM.  The shape of each physical model matches the shape of its physical source.  In other words, if the source is normalized relational, the physical model will mimic that normalized shape.  If it is a hypercube, the physical model will have a hypercube shape.  If it is a flat file, it will have a denormalized tabular shape. To aid in query optimization, the physical layer also tracks the specifics of the database brand and release.  This allows the BI Server to make the most of each physical source's distinct capabilities, writing queries in its syntax, and using its specific functions. This allows the BI Server to push processing work as deep as possible into the physical source, which minimizes data movement and takes full advantage of the database's own optimizer.  For most data sources, native APIs are used to further optimize performance and functionality. The value of having a distinct separation between the logical (business) and physical models is encapsulation of the physical characteristics.  This encapsulation is another enabler of packaged BI applications and federation.  It is also key to hiding the complex shapes and relationships in the physical sources from the end users.  Consider a routine drill-down in the business model: physically, it can require a drill-through where the first query is MDX to a multidimensional cube, followed by the drill-down query in SQL to a normalized relational database.  The only difference from the user's point of view is that the 2nd query added a more detailed dimension level column - everything else was the same. Mappings Within the Business Model and Mapping Layer, the mappings provide the binding from each logical column and join in the dimensional business model, to each of the objects that can provide its data in the physical layer.  When there is more than one option for a physical source, rules in the mappings are applied to the query context to determine which of the data sources should be hit, and how to combine their results if more than one is used.  These rules specify aggregate navigation, vertical partitioning (fragmentation), and horizontal partitioning, any of which can be federated across multiple, heterogeneous sources.  These mappings are usually the most sophisticated part of the CEIM. Presentation You might think of the presentation layer as a set of very simple relational-like views into the business model.  Over ODBC/JDBC, they present a relational catalog consisting of databases, tables and columns.  For business users, presentation services interprets these as subject areas, folders and columns, respectively.  (Note that in 10g, subject areas were called presentation catalogs in the CEIM.  In this blog, I will stick to 11g terminology.)  Generally speaking, presentation services and other clients can query only these objects (there are exceptions for certain clients such as BI Publisher and Essbase Studio). The purpose of the presentation layer is to specialize the business model for different categories of users.  Based on a user's role, they will be restricted to specific subject areas, tables and columns for security.  The breakdown of the model into multiple subject areas organizes the content for users, and subjects superfluous to a particular business role can be hidden from that set of users.  Customized names and descriptions can be used to override the business model names for a specific audience.  Variables in the object names can be used for localization. For these reasons, you are better off thinking of the tables in the presentation layer as folders than as strict relational tables.  The real semantics of tables and how they function is in the business model, and any grouping of columns can be included in any table in the presentation layer.  In 11g, an LSQL query can also span multiple presentation subject areas, as long as they map to the same business model. Other Model Objects There are some objects that apply to multiple layers.  These include security-related objects, such as application roles, users, data filters, and query limits (governors).  There are also variables you can use in parameters and expressions, and initialization blocks for loading their initial values on a static or user session basis.  Finally, there are Multi-User Development (MUD) projects for developers to check out units of work, and objects for the marketing feature used by our packaged customer relationship management (CRM) software.   The Query Factory At this point, you should have a grasp on the query factory concept.  When developing the CEIM model, you are configuring the BI Server to automatically manufacture millions of queries in response to random user requests. You do this by defining the analytic behavior in the business model, mapping that to the physical data sources, and exposing it through the presentation layer's role-based subject areas. While configuring mass production requires a different mindset than when you hand-craft individual SQL or MDX statements, it builds on the modeling and query concepts you already understand. The following posts in this series will walk through the CEIM modeling concepts and best practices in detail.  We will initially review dimensional concepts so you can understand the business model, and then present a pattern-based approach to learning the mappings from a variety of physical schema shapes and deployments to the dimensional model.  Along the way, we will also present the dimensional calculation template, and learn how to configure the many additivity patterns.

    Read the article

  • How to install Oracle Weblogic Server using OS-specific Package installer?(Linux/Solaris)

    - by PratikS -- Oracle
    Note: OS-specific Package installer As the name suggests the installer is platform specific. It is meant for installation with a 32bit JVM only. Both SUN and JROCKIT 32 bit JDKs come bundled with "OS-specific Package installer", so no need to install the JDK in advance. There are three different ways of installing Oracle Weblogic Server: Graphical mode Console mode Silent mode For Linux/Solaris: Steps to install OS-specific Package .bin installer(for Linux/Solaris) are almost same as windows except for the way we launch the installation.Installer: wls_<version>_<linux/solaris>32.bin (E.g. wls1036_linux32.bin/wls1036_solaris32.bin) 1) Graphical mode: Log in to the target UNIX system. Go to the directory that contains the installation program.(Make sure GUI is enabled or else it will default to console mode) Launch the installation by entering the following commands: [weblogic@pratik ~]$ pwd/home/oracle[weblogic@pratik ~]$ cd WLSInstallers/[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rw-rw-r-- 1 oracle oracle 871091023 Dec 22  2011 wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ chmod a+x wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rwxrwxr-x 1 oracle oracle 871091023 Dec 22  2011 wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ./wls1036_linux32.bin As soon as you run ./wls1036_linux32.bin with GUI enabled you would see the following screen: Rest of the screens and steps are similar to that of Graphical mode installation on windows, refer: How to install Oracle Weblogic Server using OS-specific Package installer?(Windows) 2) Console mode: Log in to the target UNIX system. Go to the directory that contains the installation program. Launch the installation by entering the following commands: [weblogic@pratik ~]$ pwd/home/oracle[weblogic@pratik ~]$ cd WLSInstallers/[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rw-rw-r-- 1 weblogic weblogic 871091023 Dec 22  2011 wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ chmod a+x wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rwxrwxr-x 1 weblogic weblogic 871091023 Dec 22  2011 wls1036_linux32.bin [weblogic@pratik WLSInstallers]$ ./wls1036_linux32.bin -mode=consoleExtracting 0%....................................................................................................100%<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Welcome:--------This installer will guide you through the installation of WebLogic 10.3.6.0.Type "Next" or enter to proceed to the next prompt.  If you want to change data entered previously, type "Previous".  You may quit the installer at any time by typing "Exit".Enter [Exit][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:--------------------------------- ->1|* Create a new Middleware Home   2|/home/oracle/wls_12cEnter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:---------------------------------    "Middleware Home" = [Enter new value or use default"/home/oracle/Oracle/Middleware"]Enter new Middleware Home OR [Exit][Previous][Next]> /home/oracle/WLS1036<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:---------------------------------    "Middleware Home" = [/home/oracle/WLS1036]Use above value or select another option:    1 - Enter new Middleware Home    2 - Change to default [/home/oracle/Oracle/Middleware]Enter option number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1|Email:[]   2|Support Password:[]   3|Receive Security Update:[Yes]Enter index number to select OR [Exit][Previous][Next]> 3<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.    "Receive Security Update:" = [Enter new value or use default "Yes"]Enter [Yes][No]? No<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.    "Receive Security Update:" = [Enter new value or use default "Yes"]    ** Do you wish to bypass initiation of the configuration manager and    **  remain uninformed of critical security issues in your configuration?Enter [Yes][No]? Yes<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1|Email:[]   2|Support Password:[]   3|Receive Security Update:[No]Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1|Email:[]   2|Support Password:[]   3|Receive Security Update:[No]Enter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Install Type:--------------------Select the type of installation you wish to perform. ->1|Typical    |  Install the following product(s) and component(s):    | - WebLogic Server    | - Oracle Coherence   2|Custom    |  Choose software products and components to install and perform optional    |configuration.Enter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Product Installation Directories:----------------------------------------Middleware Home Directory: [/home/oracle/WLS1036]Product Installation Directories:   1|WebLogic Server: [/home/oracle/WLS1036/wlserver_10.3]   2|Oracle Coherence: [/home/oracle/WLS1036/coherence_3.7]Enter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->The following Products and JDKs will be installed:--------------------------------------------------    WebLogic Platform 10.3.6.0    |_____WebLogic Server    |    |_____Core Application Server    |    |_____Administration Console    |    |_____Configuration Wizard and Upgrade Framework    |    |_____Web 2.0 HTTP Pub-Sub Server    |    |_____WebLogic SCA    |    |_____WebLogic JDBC Drivers    |    |_____Third Party JDBC Drivers    |    |_____WebLogic Server Clients    |    |_____WebLogic Web Server Plugins    |    |_____UDDI and Xquery Support    |    |_____Evaluation Database    |_____Oracle Coherence    |    |_____Coherence Product Files    |_____JDKs         |_____SUN SDK 1.6.0_29         |_____Oracle JRockit 1.6.0_29 SDK    *Estimated size of installation: 1,276.0 MBEnter [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installing files..0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installing JDK....0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]Performing String Substitutions...<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Configuring OCM...0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]Creating Domains...<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installation CompleteCongratulations! Installation is complete.Press [Enter] to continue or type [Exit]> [weblogic@pratik ~]$ Note: All the inputs are in Bold 3) Silent mode:              1) Log in to the target Unix system.             2) Create a silent.xml file that defines the configuration settings normally entered by a user during an interactive installation process, such as graphical-mode or console-mode installation. <?xml version="1.0" encoding="UTF-8"?><bea-installer>     <input-fields>        <data-value name="BEAHOME" value="/home/oracle/WLS1036" />        <data-value name="WLS_INSTALL_DIR" value="/home/oracle/WLS1036/wlserver_10.3" />        <data-value name="COMPONENT_PATHS" value="WebLogic Server|Oracle Coherence" />    </input-fields></bea-installer> <!-- Note: This sample silent.xml file is used to install all the components of WebLogic Server and Oracle Coherence. All the values in Bold are the variables. -->               3) Place the silent.xml file in the same directory as where the WebLogic Server Package installer is located.              4) Go to the directory that contains the installation program.              5) Start the installer as follows: [weblogic@pratik WLSInstallers]$ chmod a+x wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851516-rwxrwxr-x 1 weblogic weblogic 871091023 Dec 22  2011 wls1036_linux32.bin-rw-rw-r-- 1 weblogic weblogic       331 Jul  5 03:48 silent.xml[weblogic@pratik WLSInstallers]$ cat silent.xml<?xml version="1.0" encoding="UTF-8"?><bea-installer>        <input-fields>                <data-value name="BEAHOME" value="/home/oracle/WLS1036" />                <data-value name="WLS_INSTALL_DIR" value="/home/oracle/WLS1036/wlserver_10.3" />                <data-value name="COMPONENT_PATHS" value="WebLogic Server|Oracle Coherence" />        </input-fields></bea-installer>[weblogic@pratik WLSInstallers]$ ./wls1036_linux32.bin -mode=silenlent.xml -log=/home/oracle/WLSInstallers/install.logExtracting 0%....................................................................................................100%[weblogic@pratik WLSInstallers]$ -log=/home/oracle/WLSInstallers/install.log creates a installation log(install.log) under "/home/oracle/WLSInstallers/", when installation completes you will see the following printed in the log file: 2012-07-05 03:59:36,788 INFO  [WizardController] com.bea.plateng.wizard.silent.tasks.LogTask - The installation was successfull! For other configurable values in silent.xml refer: Values for the Sample silent.xml File for WebLogic Server Important links to Refer: Running the Installation Program in Graphical Mode Running the Installation Program in Console Mode Running the Installation Program in Silent Mode

    Read the article

  • Designing for the future

    - by Dennis Vroegop
    User interfaces and user experience design is a fast moving field. It’s something that changes pretty quick: what feels fresh today will look outdated tomorrow. I remember the day I first got a beta version of Windows 95 and I felt swept away by the user interface of the OS. It felt so modern! If I look back now, it feels old. Well, it should: the design is 17 years old which is an eternity in our field. Of course, this is not limited to UI. Same goes for many industries. I want you to think back of the cars that amazed you when you were in your teens (if you are in your teens then this may not apply to you). Didn’t they feel like part of the future? Didn’t you think that this was the ultimate in designs? And aren’t those designs hopelessly outdated today (again, depending on your age, it may just be me)? Let’s review the Win95 design: And let’s compare that to Windows 7: There are so many differences here, I wouldn’t even know where to start explaining them. The general feeling however is one of more usability: studies have shown Windows 7 is much easier to understand for new users than the older versions of Windows did. Of course, experienced Windows users didn’t like it: people are usually afraid of changes and like to stick to what they know. But for new users this was a huge improvement. And that is what UX design is all about: make a product easier to use, with less training required and make users feel more productive. Still, there are areas where this doesn’t hold up. There are plenty examples of designs from the past that are still fresh today. But if you look closely at them, you’ll notice some subtle differences. This differences are what keep the designs fresh. A good example is the signs you’ll find on the road. They haven’t changed much over the years (otherwise people wouldn’t recognize them anymore) but they have been changing gradually to reflect changes in traffic. The same goes for computer interfaces. With each new product or version of a product, the UI and UX is changed gradually. Every now and then however, a bigger change is needed. Just think about the introduction of the Ribbon in Microsoft Office 2007: the whole UI was redesigned. A lot of old users (not in age, but in times of using older versions) didn’t like it a bit, but new users or casual users seem to be more efficient using the product. Which, of course, is exactly the reason behind the changes. I believe that a big engine behind the changes in User Experience design has been the web. In the old days (i.e. before the explosion of the internet) user interface design in Windows applications was limited to choosing the margins between your battleship gray buttons. When the web came along, and especially the web 2.0 where the browsers started to act more and more as application platforms, designers stepped in and made a huge impact. In the browser, they could do whatever they wanted. In the beginning this was limited to the darn blink tag but gradually people really started to think about UX. Even more so: the design of the UI and the whole experience was taken away from the developers and put into the hands of people who knew what they were doing: UX designers. This caused some problems. Everyone who has done a web project in the early 2000’s must have had the same experience: the designers give you a set of Photoshop files and tell you to translate it to HTML. Which, of course, is very hard to do. However, with new tooling and new standards this became much easier. The latest version of HTML and CSS has taken the responsibility for the design away from the developers and placed them in the capable hands of the designers. And that’s where that responsibility belongs, after all, I don’t want a designer to muck around in my c# code just as much as he or she doesn’t want me to poke in the sites style definitions. This change in responsibilities resulted in good looking but more important: better thought out user interfaces in websites. And when websites became more and more interactive, people started to expect the same sort of look and feel from their desktop applications. But that didn’t really happen. Most business applications still have that battleship gray look and feel. Ok, they may use a different color but we’re not talking colors here but usability. Now, you may not be able to read the Dutch captions, but even if you did you wouldn’t understand what was going on. At least, not when you first see it. You have to scan the screen, read all the labels, see how they are related to the other elements on the screen and then figure out what they do. If you’re an experienced user of this application however, this might be a good thing: you know what to do and you get all the information you need in one single screen. But for most applications this isn’t the case. A lot of people only use their computer for a limited time a day (a weird concept for me, but it happens) and need it to get something done and then get on with their lives. For them, a user interface experience like the above isn’t working. (disclaimer: I just picked a screenshot, I am not saying this is bad software but it is an example of about 95% of the Windows applications out there). For the knowledge worker, this isn’t a problem. They use one or two systems and they know exactly what they need to do to achieve their goal. They don’t want any clutter on their screen that distracts them from their task, they just want to be as efficient as possible. When they know the systems they are very productive. The point is, how long does it take to become productive? And: could they be even more productive if the UX was better? Are there things missing that they don’t know about? Are there better ways to achieve what they want to achieve? Also: could a system be designed in such a way that it is not only much more easy to work with but also less tiring? in the example above you need to switch between the keyboard and mouse a lot, something that we now know can be very tiring. The goal of most applications (being client apps or websites on any kind of device) is to provide information. Information is data that when given to the right people, on the right time, in the right place and when it is correct adds value for that person (please, remember that definition: I still hear the statement “the information was wrong” which doesn’t make sense: data can be wrong, information cannot be). So if a system provides data, how can we make sure the chances of becoming information is as high as possible? A good example of a well thought-out system that attempts this is the Zune client. It is a very good application, and I think the UX is much better than it’s main competitor iTunes. Have a look at both: On the left you see the iTunes screenshot, on the right the Zune. As you notice, the Zune screen has more images but less chrome (chrome being visuals not part of the data you want to show, i.e. edges around buttons). The whole thing is text oriented or image oriented, where that text or image is part of the information you need. What is important is big, what’s less important is smaller. Yet, everything you need to know at that point is present and your attention is drawn immediately to what you’re trying to achieve: information about music. You can easily switch between the content on your machine and content on your Zune player but clicking on the image of the player. But if you didn’t know that, you’d find out soon enough: the whole UX is designed in such a way that it invites you to play around. So sooner or later (probably sooner) you’d click on that image and you would see what it does. In the iTunes version it’s harder to find: the discoverability is a lot lower. For inexperienced people the Zune player feels much more natural than the iTunes player, and they get up to speed a lot faster. How does this all work? Why is this UX better? The answer lies in a project from Microsoft with the codename (it seems to be becoming the official name though) “Metro”. Metro is a design language, based on certain principles. When they thought about UX they took a good long look around them and went out in search of metaphors. And they found them. The team noticed that signage in streets, airports, roads, buildings and so on are usually very clear and very precise. These signs give you the information you need and nothing more. It’s simple, clearly understood and fast to understand. A good example are airport signs. Airports can be intimidating places, especially for the non-experienced traveler. In the early 1990’s Amsterdam Airport Schiphol decided to redesign all the signage to make the traveller feel less disoriented. They developed a set of guidelines for signs and implemented those. Soon, most airports around the world adopted these ideas and you see variations of the Dutch signs everywhere on the globe. The signs are text-oriented. Yes, there are icons explaining what it all means for the people who can’t read or don’t understand the language, but the basic sign language is text. It’s clear, it’s high-contrast and it’s easy to understand. One look at the sign and you know where to go. The only thing I don’t like is the green sign pointing to the emergency exit, but since this is the default style for emergency exits I understand why they did this. If you look at the Zune UI again, you’ll notice the similarities. Text oriented, little or no icons, clear usage of fonts and all the information you need. This design language has a set of principles: Clean, light, open and fast Content, not chrome Soulful and alive These are just a couple of the principles, you can read the whole philosophy behind Metro for Windows Phone 7 here. These ideas seem to work. I love my Windows Phone 7. It’s easy to use, it’s clear, there’s no clutter that I do not need. It works for me. And I noticed it works for a lot of other people as well, especially people who aren’t as proficient with computers as I am. You see these ideas in a lot other places. Corning, a manufacturer of glass, has made a video of possible usages of their products. It’s their glimpse into the future. You’ll notice that a lot of the UI in the screens look a lot like what Microsoft is doing with Metro (not coincidentally Corning is the supplier for the Gorilla glass display surface on the new SUR40 device (or Surface v2.0 as a lot of people call it)). The idea behind this vision is that data should be available everywhere where you it. Systems should be available at all times and data is presented in a clear and light manner so that you can turn that data into information. You don’t need a lot of fancy animations that only distract from the data. You want the data and you want it fast. Have a look at this truly inspiring video that made: This is what I believe the future will look like. Of course, not everything is possible, or even desirable. But it is a nice way to think about the future . I feel very strongly about designing applications in such a way that they add value to the user. Designing applications that turn data into information. Applications that make the user feel happy to use them. So… when are you going to drop the battleship-gray designs? Tags van Technorati: surface,design,windows phone 7,wp7,metro

    Read the article

  • How to install Oracle Weblogic Server using OS-specific Package installer?(Windows)

    - by PratikS -- Oracle
    Note: OS-specific Package installer As the name suggests the installer is platform specific. It is meant for installation with a 32bit JVM only. Both SUN and JROCKIT 32 bit JDKs come bundled with "OS-specific Package installer", so no need to install the JDK in advance. There are three different ways of installing Oracle Weblogic Server: Graphical mode Console mode Silent mode For Windows: 1) Graphical mode:Installer: wls_<version>_win32.exe (E.g. wls1036_win32.exe)Steps to Install:1) Log in to the Windows system.2) Go to the directory that contains the installation program.3) Double-click the installation file.(wls1036_win32.exe)As soon as you double-click on the installation file you wold see the following screens: Once the installation preparation is complete you will see the welcome screen:  Click Next If there are existing Middleware Home Directories it will list all of them. You may either select an  existing Middleware Home Directory or create a new one. Note: It is always recommended to have one Middleware Home Directory per installation, so I'll select "Create a new Middleware Home" Click Next If you want to register for Security updates enter  your My Oracle Support credentials or else un-check the box, it will prompt to bypass click Yes and then click Next.  Click Next Again Click Next Click Next to All Users to access the Oracle Weblogic Server Installation.  Click Next ( Make sure the more then 1289.8 MB of space is available in the Middleware Home) Wait for the installation to complete. Click Done. And the installation is complete. 2) Console mode: Log in to the target Windows system. Open a command prompt window. Go to the directory that contains the installation program. Launch the installation by entering the name of the installation program.  C:\Documents and Settings\username>d:D:\>cd D:\WLS-InstallerD:\WLS-Installer>dir Volume in drive D is Data Volume Serial Number is 123A-4567 Directory of D:\WLS-Installer07/04/2012  08:02 AM    <DIR>          .07/04/2012  08:02 AM    <DIR>          ..07/04/2012  08:02 AM       859,548,533 wls1036_win32.exe               1 File(s)    859,548,533 bytes               2 Dir(s)  34,745,683,968 bytes freeD:\WLS-Installer>wls1036_win32.exe -mode=console A new prompt will open and you may continue with the installation as follows:  Extracting .................................................................................................... Done<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Welcome:--------This installer will guide you through the installation of WebLogic 10.3.6.0.Type "Next" or enter to proceed to the next prompt.  If you want to change dataentered previously, type "Previous".  You may quit the installer at any time bytyping "Exit".Enter [Exit][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:--------------------------------- ->1¦* Create a new Middleware Home   2¦D:\WLS\bea816   3¦D:\WLS\bea923   4¦D:\WLS\bea1033   5¦D:\WLS\bea1032 Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:---------------------------------    "Middleware Home" = [Enter new value or use default "C:\Oracle\Middleware"]Enter new Middleware Home OR [Exit][Previous][Next]> D:\WLS1036<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:---------------------------------    "Middleware Home" = [D:\WLS1036]Use above value or select another option:    1 - Enter new Middleware Home    2 - Change to default [C:\Oracle\Middleware]Enter option number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1¦Email:[]   2¦Support Password:[]   3¦Receive Security Update:[Yes]Enter index number to select OR [Exit][Previous][Next]> 3<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.    "Receive Security Update:" = [Enter new value or use default "Yes"]Enter [Yes][No]? No<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.    "Receive Security Update:" = [Enter new value or use default "Yes"]    ** Do you wish to bypass initiation of the configuration manager and    **  remain uninformed of critical security issues in your configuration?Enter [Yes][No]? Yes<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1¦Email:[]   2¦Support Password:[]   3¦Receive Security Update:[No]Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1¦Email:[]   2¦Support Password:[]   3¦Receive Security Update:[No]Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Install Type:--------------------Select the type of installation you wish to perform. ->1¦Typical    ¦  Install the following product(s) and component(s):    ¦ - WebLogic Server    ¦ - Oracle Coherence   2¦Custom    ¦  Choose software products and components to install and perform optional    ¦configuration.Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Product Installation Directories:----------------------------------------Middleware Home Directory: [D:\WLS1036]Product Installation Directories:   1¦WebLogic Server: [D:\WLS1036\wlserver_10.3]   2¦Oracle Coherence: [D:\WLS1036\coherence_3.7]Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Shortcut Location:-------------------------    *The installer creates shortcuts to Oracle components, samples, and tools.    *As a user with administrative privileges, you can specify where these    *shortcuts are created. ->1¦"All Users" Start Menu folder (recommended)    ¦For some installations, this setting may limit the automatic creation of    ¦server shortcuts for users without administrative privileges. Refer to the    ¦documentation for more information.   2¦Local user's Start Menu folder    ¦Select this option if you need to ensure that other profiles registered on    ¦this machine will not have access to these shortcuts.Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Shortcut Location:-------------------------    *Are you sure you wish to create the shortcuts in the selected location?    *    *"All Users" Start Menu folder (recommended)    *For some installations, this setting may limit the automatic creation of    *server shortcuts for users without administrative privileges. Refer to the    *documentation for more information. ->1¦Yes.   2¦No, Go back to the previous screen and make another choice.Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->The following Products and JDKs will be installed:--------------------------------------------------    WebLogic Platform 10.3.6.0    +----WebLogic Server    ¦    +----Core Application Server    ¦    +----Administration Console    ¦    +----Configuration Wizard and Upgrade Framework    ¦    +----Web 2.0 HTTP Pub-Sub Server    ¦    +----WebLogic SCA    ¦    +----WebLogic JDBC Drivers    ¦    +----Third Party JDBC Drivers    ¦    +----WebLogic Server Clients    ¦    +----WebLogic Web Server Plugins    ¦    +----UDDI and Xquery Support    ¦    +----Evaluation Database    +----Oracle Coherence    ¦    +----Coherence Product Files    +----JDKs         +----SUN SDK 1.6.0_29         +----Oracle JRockit 1.6.0_29 SDK    *Estimated size of installation: 1,289.8 MBEnter [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installing files..0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installing JDK....0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]Performing String Substitutions...<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Configuring OCM...0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]Creating Domains...<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installation CompleteCongratulations! Installation is complete.Press [Enter] to continue or type [Exit]>...Finish installation. Press any key to close this window... Note: All the inputs are in Bold 3) Silent mode: Coming soon...

    Read the article

  • CodePlex Daily Summary for Thursday, August 01, 2013

    CodePlex Daily Summary for Thursday, August 01, 2013Popular ReleasesmyCollections: Version 2.7.11.0: New in this version : Added Copy To functionality (useful if you have NAS or media player). You can now use you web cam to scan UPC Code or take picture for cover. Added Persian Language Improved Ukrainian Translation Improved Pdf export Improved Cover Flow Improved TMDB Information. Improved Zappiti and Dune player compatibility Improved GameDB provider. Fix IMDB provider. Fix issue with rating BugFixing and performance improvement.wsubi: wsubi-1.6: Enhancements included in this release: Implement issue #6 - Add a 'query' Command for .sql scripts You can now run T-SQL scripts with the application. Results can be out for review to the console or saved to a file. For more details on running queries, check the updated Documentation page.SuperSocket, an extensible socket application framework: SuperSocket 1.6 beta 2: The changes included in this release: introduced ServerManager improved the code about process level isolation added new configuration attribute "storeLocation" for the certificate node added sendTimeOut support for async sending fixed a bug that when you close a session, the data is being sent won't be sent suppressed the socket error 10060 fixed the default clear idle session parameters in the config model class added configuration section detecting and give proper exception ...GoAgent GUI: GoAgent GUI 1.4.0: ??????????: Windows XP SP3 Windows Vista SP1 Windows 7 Windows 8 Windows 8.1 ??Windows 8.1???????????? ????: .Net Framework 4.0 http://59.111.20.19/download/17718/33240761/4/exe/69/54/177181/dotNetFx40Fullx86x64.exe Microsoft Visual C++ 2010 Redistributable Package http://59.111.20.23/download/4894298/8555584/1/exe/28/176/1348305610524944/vcredistx86.exe ???????????????。 ?????Windows XP?Windows 7????,???????????,?issue??????。uygw@outlook.comMVC Generator: MVC Generator Visual Studio Addin: This is the latest build, this includes the MVCGenerator.dll, and Visual Studio Addin file. See the home page of this project for installation instructions.nopCommerce. Open source shopping cart (ASP.NET MVC): nopCommerce 3.10: Highlight features & improvements: • Performance optimization. • New more user-friendly product/product-variant logic. Now we'll have only products (simple and grouped). • Bundle products support added. • Allow a store owner to associate product image for product variant attribute values. To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).ExtJS based ASP.NET Controls: FineUI v3.3.1: ??FineUI ?? ExtJS ??? ASP.NET ???。 FineUI??? ?? No JavaScript,No CSS,No UpdatePanel,No ViewState,No WebServices ???????。 ?????? IE 7.0、Firefox 3.6、Chrome 3.0、Opera 10.5、Safari 3.0+ ???? Apache License v2.0 ?:ExtJS ?? GPL v3 ?????(http://www.sencha.com/license)。 ???? ??:http://fineui.com/bbs/ ??:http://fineui.com/demo/ ??:http://fineui.com/doc/ ??:http://fineui.codeplex.com/ FineUI ???? ExtJS ????????,???? ExtJS ?,???????????ExtJS?: 1. ????? FineUI ? ExtJS ?:http://fineui.com/bbs/fo...AutoNLayered - Domain Oriented N-Layered .NET 4.5: AutoNLayered v1.0.5: - Fix Dtos. Abstract collections replaced by concrete (correct serialization WCF). - OrderBy in navigation properties. - Unit Test with Fakes. - Map of entities/dto moved to application services. - Libraries updated. Warning using Fakes: http://connect.microsoft.com/VisualStudio/feedback/details/782031/visual-studio-2012-add-fakes-assembly-does-not-add-all-needed-referencesPath Copy Copy: 11.1: Minor release with two new features: Submenu's contextual menu item now has an icon next to it Added reference to JavaScript regular expression format in Settings application Since this release does not have any glaring bug fixes, it is more of an optional update for existing users. It depends on whether you want to be able to spot the Path Copy Copy submenu more easily. I recommend you install it to see if the icon makes sense. As always, please don't hesitate to leave feedback via Discus...Lib.Web.Mvc & Yet another developer blog: Lib.Web.Mvc 6.3.0: Lib.Web.Mvc is a library which contains some helper classes for ASP.NET MVC such as strongly typed jqGrid helper, XSL transformation HtmlHelper/ActionResult, FileResult with range request support, custom attributes and more. Release contains: Lib.Web.Mvc.dll with xml documentation file Standalone documentation in chm file and change log Library source code Sample application for strongly typed jqGrid helper is available here. Sample application for XSL transformation HtmlHelper/ActionRe...Media Companion: Media Companion MC3.574b: Some good bug fixes been going on with the new XBMC-Link function. Thanks to all who were able to do testing and gave feedback. New:* Added some adhoc extra General movie filters, one of which is Plot = Outline (see fixes above). To see the filters, add the following line to your config.xml: <ShowExtraMovieFilters>True</ShowExtraMovieFilters>. The others are: Imdb in folder name, Imdb in not folder name & Imdb not in folder name & year mismatch. * Movie - display <tag> list on browser tab ...OfflineBrowser: Preview Release with Search: I've added search to this release.VG-Ripper & PG-Ripper: VG-Ripper 2.9.46: changes FIXED LoginFIM 2010 GoogleApps MA: GoogleAppsMA1.1.2: Fixed bug during import. - Fixed following bug. - In some condition, 'dn is missing' error occur.Install Verify Tool: Install Verify Tool V 1.0 With Client: Use a windows service to do a remote validation work. QA can use this tool to verify daily build installation.C# Intellisense for Notepad++: 'Namespace resolution' release: Auto-Completion from "empty spot" Add missing "using" statementsOpen Source Job board: Version X3: Full version of job board, didn't have monies to fund it so it's free.DSeX DragonSpeak eXtended Editor: Version 1.0.116.0726: Cleaned up Wizard Interface Added Functionality for RTF UndoRedo IE Inserting Text from Wizard output to the Tabbed Editor Added Sanity Checks to Search/Replace Dialog to prevent crashes Fixed Template and Paste undoredo Fix Undoredo Blank spots Added New_FileTag Const = "(New FIle)" Added Filename to Modified FileClose queries (Thanks Lothus Marque)Math.NET Numerics: Math.NET Numerics v2.6.0: What's New in Math.NET Numerics 2.6 - Announcement, Explanations and Sample Code. New: Linear Curve Fitting Linear least-squares fitting (regression) to lines, polynomials and linear combinations of arbitrary functions. Multi-dimensional fitting. Also works well in F# with the F# extensions. New: Root Finding Brent's method. ~Candy Chiu, Alexander Täschner Bisection method. ~Scott Stephens, Alexander Täschner Broyden's method, for multi-dimensional functions. ~Alexander Täschner ...mojoPortal: 2.3.9.8: see release notes on mojoportal.com https://www.mojoportal.com/mojoportal-2398-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4 with either .NET 4 or ideally .NET 4.5 hosting, we will probably drop support for .NET 3.5 in the near future. The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To downl...New Projects.NET Micro Framework for STM32F4 with GCC support: The project adds GCC compiler support to .NET Micro Framework code for the STM32F4 family of ARM Cortex-based MCUs originally created by Oberon microsystems.AD Group Comparison Tool: This tool scans Active Directory for groups with matching or empty membership lists, identifying redundant groups that can possibly be eliminated.AdvGenWebRSSReader: This project is to build a portal to manage the rss feed.Best Framework: Using This framework most of .net functions that needs a lot of code writing became available almost in 1 line(s) of code. CargoOnLine: ????????cRumble Framework: C# Reporting Framework for support different technologies and a uncoupled reports.DbDataSource: DbDataSource is a ASP.NET WebForms DataSource control for simple use with EntityFramework CodeFirst.Excel Powershell Library: ExcelPSLib is a PowerShell Module that allows easy creation of XLSX file by using the EPPlus 3.1 .Net LibraryGenProj, a tool for automatic maintenance of Visual Studio .csproj files: Creates a .csproj by scanning folders for files and injecting XML into a previously created .csproj template. Uses a configuration file to control behavior.HLSLBuild: fxc integration for MSBuild and Visual Studio.HotelManagerByHuaibao: Here is a hotel management system on developing.ItemMover ..:: I Like SharePoint ::..: The ItemMover offers your users the ability to move list items between any folder from content type “Folder Content Types”. JadeTours: This is the website for JadeToursNaughty Dog Texture Viewer: A simple program that can view textures inside .pak files from games like The Last of Us and Uncharted series.Number Guessing Game: This is my version of the number guessing game. The computer will generate a number between 1-20 and the goal is to guess that number.prakark07312013Git01: *bold* _italics_ +underline+ ! Heading 1 !! Heading 2 * Bullet List ** Bullet List 2 # Number List ## Number List 2 [another wiki page] [url:http://www.example.prakark07312013Hg01: https://ajaxcontroltoolkit.codeplex.com/workitem/list/basicprakark07312013TFS01: *bold* _italics_ +underline+ ! Heading 1 !! Heading 2 * Bullet List ** Bullet List 2 # Number List ## Number List 2 [another wiki page] [url:http://www.example.PythonCode: Some python code.S1ToKindle: send s1 post to kindleSAML2: An implementation of the SAML 2 specification for .NET.SAML2.Logging.CommonLogging: A logging provider for SAML2 based on Common.Logging.SAML2.Logging.Log4Net: A logging provider for SAML2 based on Log4Net.SAML2.Profiles.DKSAML20: Extension profile for SAML2 which provides OASIS SAML 2.0 validation for the DK specification.SharePoint 2010 Export User Information to Text file, SQL server: This project will help you to export general information about uses from sharepoint 2010 to text file, which you can export into any other database like SQLtestdd07312013git: ftestdd07312013tfs: hjVarian Developers Forum: This project supports Varian collaborators and customers in their work with Varian Medical Systems public APIs.vb??????: vb??????Vinyl: Vinyl is a way to electronically keep track of your record collection.Visual Basic Web Browser: Web browser in visual basicWorkerHourManager: hour managment system,ASP,.NET,college

    Read the article

  • CodePlex Daily Summary for Wednesday, July 31, 2013

    CodePlex Daily Summary for Wednesday, July 31, 2013Popular ReleasesSharePoint 2010 Export User Information to Text file, SQL server: Full Source code of the project: Please change SharePoint server address. I have used my sharepoint server -> http://sneakpreviewWINJS CTK (Control Toolkit): Initial Release: Initial release supports the following. Expander NumericBoxXMLPreprocess: 2.0.18: What's new in this release For XML Spreadsheet 2003 format, used the frozen row at the top of the worksheet to indicate the beginning of the values. This prevents you from having to start your values at row 7. This can be overridden with the /firstValueRow (or /vr) argument. Issues Fixed Fix for Issue 13006 : Corrected default treatment of the value "false" Beginning with this version, the FixFalse behavior that has caused confusion to so many, has hopefully been addressed in a way that st...MVVM.EventToCommand: Tommy.MVVM.EventToCommand: Tommy.MVVM.EventToCommand is a free, open source developer focused event2command via WinRT for MVVM Pattern.MVC Generator: MVC Generator Visual Studio Addin: This is the latest build, this includes the MVCGenerator.dll, and Visual Studio Addin file. See the home page of this project for installation instructions.Project Nonnon: 2013_07_30: ----------==========----------==========----------==========---------- "No news is good news." ----------==========----------==========----------==========---------- Change Log 2013/07/30 BUGFIX game/sound/directsound.c n_directsound_loop() OLD : crash when DirectSound is not supported NEW : fixed game/sound/waveout.c when included OLD : compile error NEW : fixed game/chara.c when included OLD : compile error NEW : fixed game/direct2d.c when included ...Dynamics CRM 2011 EasyPlugins: EasyPlugins-1.2.3.1-managed: V1.2.3.1 - Bug Fix : Condition expression is not saved on action creation - Bug Fix : Request Param with single attribute result - Some style changes v1.2.3.0 - Bug Fix : Twice plugins execution. - New Abort action - Depth Plugin Execution management on each action - Turn On/Off EasyPlugins feature (can be useful in some cases of imports) v1.2.0.0 Associate / Disassociate actions are now available Import / Export features Better management of Lookups Trigger NamingXmlObjectMapper: XOM Alpha 1.0: first Alpha Version of XOM: read and write xml nodes and attributes mapping to IList or Interfaces simple property attribute mapping creates new xml nodes at run time IList changes (add, remove) implemented in the next releasenopCommerce. Open source shopping cart (ASP.NET MVC): nopCommerce 3.10: Highlight features & improvements: • Performance optimization. • New more user-friendly product/product-variant logic. Now we'll have only products (simple and grouped). • Bundle products support added. • Allow a store owner to associate product image for product variant attribute values. To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).ExtJS based ASP.NET Controls: FineUI v3.3.1: ??FineUI ?? ExtJS ??? ASP.NET ???。 FineUI??? ?? No JavaScript,No CSS,No UpdatePanel,No ViewState,No WebServices ???????。 ?????? IE 7.0、Firefox 3.6、Chrome 3.0、Opera 10.5、Safari 3.0+ ???? Apache License v2.0 ?:ExtJS ?? GPL v3 ?????(http://www.sencha.com/license)。 ???? ??:http://fineui.com/bbs/ ??:http://fineui.com/demo/ ??:http://fineui.com/doc/ ??:http://fineui.codeplex.com/ FineUI ???? ExtJS ????????,???? ExtJS ?,???????????ExtJS?: 1. ????? FineUI ? ExtJS ?:http://fineui.com/bbs/fo...AutoNLayered - Domain Oriented N-Layered .NET 4.5: AutoNLayered v1.0.5: - Fix Dtos. Abstract collections replaced by concrete (correct serialization WCF). - OrderBy in navigation properties. - Unit Test with Fakes. - Map of entities/dto moved to application services. - Libraries updated. Warning using Fakes: http://connect.microsoft.com/VisualStudio/feedback/details/782031/visual-studio-2012-add-fakes-assembly-does-not-add-all-needed-referencesPath Copy Copy: 11.1: Minor release with two new features: Submenu's contextual menu item now has an icon next to it Added reference to JavaScript regular expression format in Settings application Since this release does not have any glaring bug fixes, it is more of an optional update for existing users. It depends on whether you want to be able to spot the Path Copy Copy submenu more easily. I recommend you install it to see if the icon makes sense. As always, please don't hesitate to leave feedback via Discus...CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.0 RC3: This is the third release candidate of CMake Tools for Visual Studio 1.0, which contains the following bug fixes: Opening a CMake file from Windows Explorer while Visual Studio is already open will no start a new instance of Visual Studio. Typing a symbol while the IntelliSense list box is visible and the text typed so far does not match any item in the list will dismiss the list box and insert the symbol typed.R.NET: R.NET 1.5: The major changes in v1.5 are: Initialize method must be called before using R. Settings should be passed to the method. EagerEvaluate method renamed to Evaluate (use Defer method when you want old version of Evaluate).Media Companion: Media Companion MC3.574b: Some good bug fixes been going on with the new XBMC-Link function. Thanks to all who were able to do testing and gave feedback. New:* Added some adhoc extra General movie filters, one of which is Plot = Outline (see fixes above). To see the filters, add the following line to your config.xml: <ShowExtraMovieFilters>True</ShowExtraMovieFilters>. The others are: Imdb in folder name, Imdb in not folder name & Imdb not in folder name & year mismatch. * Movie - display <tag> list on browser tab ...OfflineBrowser: Preview Release with Search: I've added search to this release.VG-Ripper & PG-Ripper: VG-Ripper 2.9.46: changes FIXED LoginMath.NET Numerics: Math.NET Numerics v2.6.0: What's New in Math.NET Numerics 2.6 - Announcement, Explanations and Sample Code. New: Linear Curve Fitting Linear least-squares fitting (regression) to lines, polynomials and linear combinations of arbitrary functions. Multi-dimensional fitting. Also works well in F# with the F# extensions. New: Root Finding Brent's method. ~Candy Chiu, Alexander Täschner Bisection method. ~Scott Stephens, Alexander Täschner Broyden's method, for multi-dimensional functions. ~Alexander Täschner ...AJAX Control Toolkit: July 2013 Release: AJAX Control Toolkit Release Notes - July 2013 Release Version 7.0725July 2013 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - Instructions for using the AJAX Control Toolkit with ASP.NET 4.5 can be found at...MJP's DirectX 11 Samples: Specular Antialiasing Sample: Sample code to complement my presentation that's part of the Physically Based Shading in Theory and Practice course at SIGGRAPH 2013, entitled "Crafting a Next-Gen Material Pipeline for The Order: 1886". Demonstrates various methods of preventing aliasing from specular BRDF's when using high-frequency normal maps. The zip file contains source code as well as a pre-compiled x64 binary.New ProjectsA Simple Java Encryption program: This is my very first Java project. It's a file encryptor. It's purpose is to codify a file to make it look like it contain random information.AA??: aa??,????。Browser Chooser 2: Browser Chooser 2 is an updated fork of the original. It's primary goal is to simplify using multiple browser.campuscloud-mobile: Dieses Projekt enthält die mobilen Apps zur Campuscloud App.campuscloud-owncloudplugins: Dieses Projekt enthält die ownCloud-Plugins zu den CampuCloud-Apps, die ownCloud-Server um weitere Funktionalitäten ergänzen.campuscloud-windowsphone8: Diese Projekt enthält die Windows Phone 8 App zur Campuscloud App.Chronos .Net Performance Profiler: Free .Net Performance ProfilerConvertServer: a pet project i works onDevelopment Tools for Solid Edge: Development tools for Solid Edge.DocAssist: The project is to facilitate user's day-to-day management of her files in a customisable way on Windows System equipped with .NET framework.epe: epeETP 3: prueba de asp mvc para desarrollar conjuntamente en un repositorio tfsHello World in MVC4: Application to testInvoke-MsTest PowerShell Module: A PowerShell module that makes unit testing Visual Studio projects fast and easy. Uses MsTest.exe to launch all test associated with your project or solution.MarathonTP: MarathonTP (TP stands for Transport Protocol) is a lightweight communication protocol specificaly developped for machine to machine communication.Multicopter Simulator: A simulation environment for multicopter built with Microsoft Robotics Developer Studio 4.MVC Rags: A bunch of ASP.NET MVC4 helpersMVVM.EventToCommand: Tommy.MVVM.EventToCommand is a free, open source developer focused event2command via WinRT for MVVM Pattern.RNT.Common: rnt.commonStorageOrizer: Software to manage disk space, e.g. move Programs without damaging function. Subset Sum Problem Solver: SubsetThirdPartyLogin: ?????twitterBootstrapAspNetMVCControls: Asp.net MVC Controls based on twiiter Boostrap( a beautiful html & css framework published by Twitter).Unify: Unify is an automatic IoC Container Configurator, based on layers approach via annotations.V32 Assembler: The assembler for my assembly language for my 32-bit virtual machine with a home-made instruction set.

    Read the article

  • Down Tools Week Cometh: Kissing Goodbye to CVs/Resumes and Cover Letters

    - by Bart Read
    I haven't blogged about what I'm doing in my (not so new) temporary role as Red Gate's technical recruiter, mostly because it's been routine, business as usual stuff, and because I've been trying to understand the role by doing it. I think now though the time has come to get a little more radical, so I'm going to tell you why I want to largely eliminate CVs/resumes and cover letters from the application process for some of our technical roles, and why I think that might be a good thing for candidates (and for us). I have a terrible confession to make, or at least it's a terrible confession for a recruiter: I don't really like CV sifting, or reading cover letters, and, unless I've misread the mood around here, neither does anybody else. It's dull, it's time-consuming, and it's somewhat soul destroying because, when all is said and done, you're being paid to be incredibly judgemental about people based on relatively little information. I feel like I've dirtied myself by saying that - I mean, after all, it's a core part of my job - but it sucks, it really does. (And, of course, the truth is I'm still a software engineer at heart, and I'm always looking for ways to do things better.) On the flip side, I've never met anyone who likes writing their CV. It takes hours and hours of faffing around and massaging it into shape, and the whole process is beset by a gnawing anxiety, frustration, and insecurity. All you really want is a chance to demonstrate your skills - not just talk about them - and how do you do that in a CV or cover letter? Often the best candidates will include samples of their work (a portfolio, screenshots, links to websites, product downloads, etc.), but sometimes this isn't possible, or may not be appropriate, or you just don't think you're allowed because of what your school/university careers service has told you (more commonly an issue with grads, obviously). And what are we actually trying to find out about people with all of this? I think the common criteria are actually pretty basic: Smart Gets things done (thanks for these two Joel) Not an a55hole* (sorry, have to get around Simple Talk's swear filter - and thanks to Professor Robert I. Sutton for this one) *Of course, everyone has off days, and I don't honestly think we're too worried about somebody being a bit grumpy every now and again. We can do a bit better than this in the context of the roles I'm talking about: we can be more specific about what "gets things done" means, at least in part. For software engineers and interns, the non-exhaustive meaning of "gets things done" is: Excellent coder For test engineers, the non-exhaustive meaning of "gets things done" is: Good at finding problems in software Competent coder Team player, etc., to me, are covered by "not an a55hole". I don't expect people to be the life and soul of the party, or a wild extrovert - that's not what team player means, and it's not what "not an a55hole" means. Some of our best technical staff are quiet, introverted types, but they're still pleasant to work with. My problem is that I don't think the initial sift really helps us find out whether people are smart and get things done with any great efficacy. It's better than nothing, for sure, but it's not as good as it could be. It's also contentious, and potentially unfair/inequitable - if you want to get an idea of what I mean by this, check out the background information section at the bottom. Before I go any further, let's look at the Red Gate recruitment process for technical staff* as it stands now: (LOTS of) People apply for jobs. All these applications go through a brutal process of manual sifting, which eliminates between 75 and 90% of them, depending upon the role, and the time of year**. Depending upon the role, those who pass the sift will be sent an assessment or telescreened. For the purposes of this blog post I'm only interested in those that are sent some sort of programming assessment, or bug hunt. This means software engineers, test engineers, and software interns, which are the roles for which I receive the most applications. The telescreen tends to be reserved for project or product managers. Those that pass the assessment are invited in for first interview. This interview is mostly about assessing their technical skills***, although we're obviously on the look out for cultural fit red flags as well. If the first interview goes well we'll invite candidates back for a second interview. This is where team/cultural fit is really scoped out. We also use this interview to dive more deeply into certain areas of their skillset, and explore any concerns that may have come out of the first interview (these obviously won't have been serious or obvious enough to cause a rejection at that point, but are things we do need to look into before we'd consider making an offer). We might subsequently invite them in for lunch before we make them an offer. This tends to happen when we're recruiting somebody for a specific team and we'd like them to meet all the people they'll be working with directly. It's not an interview per se, but can prove pivotal if they don't gel with the team. Anyone who's made it this far will receive an offer from us. *We have a slightly quirky definition of "technical staff" as it relates to the technical recruiter role here. It includes software engineers, test engineers, software interns, user experience specialists, technical authors, project managers, product managers, and development managers, but does not include product support or information systems roles. **For example, the quality of graduate applicants overall noticeably drops as the academic year wears on, which is not to say that by now there aren't still stars in there, just that they're fewer and further between. ***Some organisations prefer to assess for team fit first, but I think assessing technical skills is a more effective initial filter - if they're the nicest person in the world, but can't cut a line of code they're not going to work out. Now, as I suggested in the title, Red Gate's Down Tools Week is upon us once again - next week in fact - and I had proposed as a project that we refactor and automate the first stage of marking our programming assessments. Marking assessments, and in fact organising the marking of them, is a somewhat time-consuming process, and we receive many assessment solutions that just don't make the cut, for whatever reason. Whilst I don't think it's possible to fully automate marking, I do think it ought to be possible to run a suite of automated tests over each candidate's solution to see whether or not it behaves correctly and, if it does, move on to a manual stage where we examine the code for structure, decomposition, style, readability, maintainability, etc. Obviously it's possible to use tools to generate potentially helpful metrics for some of these indices as well. This would obviously reduce the marking workload, and would provide candidates with quicker feedback about whether they've been successful - though I do wonder if waiting a tactful interval before sending a (nicely written) rejection might be wise. I duly scrawled out a picture of my ideal process, which looked like this: The problem is, as soon as I'd roughed it out, I realised that fundamentally it wasn't an ideal process at all, which explained the gnawing feeling of cognitive dissonance I'd been wrestling with all week, whilst I'd been trying to find time to do this. Here's what I mean. Automated assessment marking, and the associated infrastructure around that, makes it much easier for us to deal with large numbers of assessments. This means we can be much more permissive about who we send assessments out to or, in other words, we can give more candidates the opportunity to really demonstrate their skills to us. And this leads to a question: why not give everyone the opportunity to demonstrate their skills, to show that they're smart and can get things done? (Two or three of us even discussed this in the down tools week hustings earlier this week.) And isn't this a lot simpler than the alternative we'd been considering? (FYI, this was automated CV/cover letter sifting by some form of textual analysis to ideally eliminate the worst 50% or so of applications based on an analysis of the 20,000 or so historical applications we've received since 2007 - definitely not the basic keyword analysis beloved of recruitment agencies, since this would eliminate hardly anyone who was awful, but definitely would eliminate stellar Oxbridge candidates - #fail - or some nightmarishly complex Google-like system where we profile all our currently employees, only to realise that we're never going to get representative results because we don't have a statistically significant sample size in any given role - also #fail.) No, I think the new way is better. We let people self-select. We make them the masters (or mistresses) of their own destiny. We give applicants the power - we put their fate in their hands - by giving them the chance to demonstrate their skills, which is what they really want anyway, instead of requiring that they spend hours and hours creating a CV and cover letter that I'm going to evaluate for suitability, and make a value judgement about, in approximately 1 minute (give or take). It doesn't matter what university you attended, it doesn't matter if you had a bad year when you took your A-levels - here's your chance to shine, so take it and run with it. (As a side benefit, we cut the number of applications we have to sift by something like two thirds.) WIN! OK, yeah, sounds good, but will it actually work? That's an excellent question. My gut feeling is yes, and I'll justify why below (and hopefully have gone some way towards doing that above as well), but what I'm proposing here is really that we run an experiment for a period of time - probably a couple of months or so - and measure the outcomes we see: How many people apply? (Wouldn't be surprised or alarmed to see this cut by a factor of ten.) How many of them submit a good assessment? (More/less than at present?) How much overhead is there for us in dealing with these assessments compared to now? What are the success and failure rates at each interview stage compared to now? How many people are we hiring at the end of it compared to now? I think it'll work because I hypothesize that, amongst other things: It self-selects for people who really want to work at Red Gate which, at the moment, is something I have to try and assess based on their CV and cover letter - but if you're not that bothered about working here, why would you complete the assessment? Candidates who would submit a shoddy application probably won't feel motivated to do the assessment. Candidates who would demonstrate good attention to detail in their CV/cover letter will demonstrate good attention to detail in the assessment. In general, only the better candidates will complete and submit the assessment. Marking assessments is much less work so we'll be able to deal with any increase that we see (hopefully we will see). There are obviously other questions as well: Is plagiarism going to be a problem? Is there any way we can detect/discourage potential plagiarism? How do we assess candidates' education and experience? What about their ability to communicate in writing? Do we still want them to submit a CV afterwards if they pass assessment? Do we want to offer them the opportunity to tell us a bit about why they'd like the job when they submit their assessment? How does this affect our relationship with recruitment agencies we might use to hire for these roles? So, what's the objective for next week's Down Tools Week? Pretty simple really - we want to implement this process for the Graduate Software Engineer and Software Engineer positions that you can find on our website. I will be joined by a crack team of our best developers (Kevin Boyle, and new Red-Gater, Sam Blackburn), and recruiting hostess with the mostest Laura McQuillen, and hopefully a couple of others as well - if I can successfully twist more arms before Monday.* Hopefully by next Friday our experiment will be up and running, and we may have changed the way Red Gate recruits software engineers for good! Stay tuned and we'll let you know how it goes! *I'm going to play dirty by offering them beer and chocolate during meetings. Some background information: how agonising over the initial CV/cover letter sift helped lead us to bin it off entirely The other day I was agonising about the new university/good degree grade versus poor A-level results issue, and decided to canvas for other opinions to see if there was something I could do that was fairer than my current approach, which is almost always to reject. This generated quite an involved discussion on our Yammer site: I'm sure you can glean a pretty good impression of my own educational prejudices from that discussion as well, although I'm very open to changing my opinion - hopefully you've already figured that out from reading the rest of this post. Hopefully you can also trace a logical path from agonising about sifting to, "Uh, hang on, why on earth are we doing this anyway?!?" Technorati Tags: recruitment,hr,developers,testers,red gate,cv,resume,cover letter,assessment,sea change

    Read the article

  • Office 2010: It&rsquo;s not just DOC(X) and XLS(X)

    - by andrewbrust
    Office 2010 has released to manufacturing.  The bits have left the (product team’s) building.  Will you upgrade? This version of Office is officially numbered 14, a designation that correlates with the various releases, through the years, of Microsoft Word.  There were six major versions of Word for DOS, during whose release cycles came three 16-bit Windows versions.  Then, starting with Word 95 and counting through Word 2007, there have been six more versions – all for the 32-bit Windows platform.  Skip version 13 to ward off folksy bad luck (and, perhaps, the bugs that could come with it) and that brings us to version 14, which includes implementations for both 32- and 64-bit Windows platforms.  We’ve come a long way baby.  Or have we? As it does every three years or so, debate will now start to rage on over whether we need a “14th” version the PC platform’s standard word processor, or a “13th” version of the spreadsheet.  If you accept the premise of that question, then you may be on a slippery slope toward answering it in the negative.  Thing is, that premise is valid for certain customers and not others. The Microsoft Office product has morphed from one that offered core word processing, spreadsheet, presentation and email functionality to a suite of applications that provides unique, new value-added features, and even whole applications, in the context of those core services.  The core apps thus grow in mission: Excel is a BI tool.  Word is a collaborative editorial system for the production of publications.  PowerPoint is a media production platform for for live presentations and, increasingly, for delivering more effective presentations online.  Outlook is a time and task management system.  Access is a rich client front-end for data-driven self-service SharePoint applications.  OneNote helps you capture ideas, corral random thoughts in a semi-structured way, and then tie them back to other, more rigidly structured, Office documents. Google Docs and other cloud productivity platforms like Zoho don’t really do these things.  And there is a growing chorus of voices who say that they shouldn’t, because those ancillary capabilities are over-engineered, over-produced and “under-necessary.”  They might say Microsoft is layering on superfluous capabilities to avoid admitting that Office’s core capabilities, the ones people really need, have become commoditized. It’s hard to take sides in that argument, because different people, and the different companies that employ them, have different needs.  For my own needs, it all comes down to three basic questions: will the new version of Office save me time, will it make the mundane parts of my job easier, and will it augment my services to customers?  I need my time back.  I need to spend more of it with my family, and more of it focusing on my own core capabilities rather than the administrative tasks around them.  And I also need my customers to be able to get more value out of the services I provide. Help me triage my inbox, help me get proposals done more quickly and make them easier to read.  Let me get my presentations done faster, make them more effective and make it easier for me to reuse materials from other presentations.  And, since I’m in the BI and data business, help me and my customers manage data and analytics more easily, both on the desktop and online. Those are my criteria.  And, with those in mind, Office 2010 is looking like a worthwhile upgrade.  Perhaps it’s not earth-shattering, but it offers a combination of incremental improvements and a few new major capabilities that I think are quite compelling.  I provide a brief roundup of them here.  It’s admittedly arbitrary and not comprehensive, but I think it tells the Office 2010 story effectively. Across the Suite More than any other, this release of Office aims to give collaboration a real workout.  In certain apps, for the first time, documents can be opened simultaneously by multiple users, with colleagues’ changes appearing in near real-time.  Web-browser-based versions of Word, Excel, PowerPoint and OneNote will be available to extend collaboration to contributors who are off the corporate network. The ribbon user interface is now more pervasive (for example, it appears in OneNote and in Outlook’s main window).  It’s also customizable, allowing users to add, easily, buttons and options of their choosing, into new tabs, or into new groups within existing tabs. Microsoft has also taken the File menu (which was the “Office Button” menu in the 2007 release) and made it into a full-screen “Backstage” view where document-wide operations, like saving, printing and online publishing are performed. And because, more and more, heavily formatted content is cut and pasted between documents and applications, Office 2010 makes it easier to manage the retention or jettisoning of that formatting right as the paste operation is performed.  That’s much nicer than stripping it off, or adding it back, afterwards. And, speaking of pasting, a number of Office apps now make it especially easy to insert screenshots within their documents.  I know that’s useful to me, because I often document or critique applications and need to show them in action.  For the vast majority of users, I expect that this feature will be more useful for capturing snapshots of Web pages, but we’ll have to see whether this feature becomes popular.   Excel At first glance, Excel 2010 looks and acts nearly identically to the 2007 version.  But additional glances are necessary.  It’s important to understand that lots of people in the working world use Excel as more of a database, analytics and mathematical modeling tool than merely as a spreadsheet.  And it’s also important to understand that Excel wasn’t designed to handle such workloads past a certain scale.  That all changes with this release. The first reason things change is that Excel has been tuned for performance.  It’s been optimized for multi-threaded operation; previously lengthy processes have been shortened, especially for large data sets; more rows and columns are allowed and, for the first time, Excel (and the rest of Office) is available in a 64-bit version.  For Excel, this means users can take advantage of more than the 2GB of memory that the 32-bit version is limited to. On the analysis side, Excel 2010 adds Sparklines (tiny charts that fit into a single cell and can therefore be presented down an entire column or across a row) and Slicers (a more user-friendly filter mechanism for PivotTables and charts, which visually indicates what the filtered state of a given data member is).  But most important, Excel 2010 supports the new PowerPIvot add-in which brings true self-service BI to Office.  PowerPivot allows users to import data from almost anywhere, model it, and then analyze it.  Rather than forcing users to build “spreadmarts” or use corporate-built data warehouses, PowerPivot models function as true columnar, in-memory OLAP cubes that can accommodate millions of rows of data and deliver fast drill-down performance. And speaking of OLAP, Excel 2010 now supports an important Analysis Services OLAP feature called write-back.  Write-back is especially useful in financial forecasting scenarios for which Excel is the natural home.  Support for write-back is long overdue, but I’m still glad it’s there, because I had almost given up on it.   PowerPoint This version of PowerPoint marks its progression from a presentation tool to a video and photo editing and production tool.  Whether or not it’s successful in this pursuit, and if offering this is even a sensible goal, is another question. Regardless, the new capabilities are kind of interesting.  A greatly enhanced set of slide transitions with 3D effects; in-product photo and video editing; accommodation of embedded videos from services such as YouTube; and the ability to save a presentation as a video each lay testimony to PowerPoint’s transformation into a media tool and away from a pure presentation tool. These capabilities also recognize the importance of the Web as both a source for materials and a channel for disseminating PowerPoint output. Congruent with that is PowerPoint’s new ability to broadcast a slide presentation, using a quickly-generated public URL, without involving the hassle or expense of a Web meeting service like GoToMeeting or Microsoft’s own LiveMeeting.  Slides presented through this broadcast feature retain full color fidelity and transitions and animations are preserved as well.   Outlook Microsoft’s ubiquitous email/calendar/contact/task management tool gains long overdue speed improvements, especially against POP3 email accounts.  Outlook 2010 also supports multiple Exchange accounts, rather than just one; tighter integration with OneNote; and a new Social Connector providing integration with, and presence information from, online social network services like LinkedIn and Facebook (not to mention Windows Live).  A revamped conversation view now includes messages that are part of a given thread regardless of which folder they may be stored in. I don’t know yet how well the Social Connector will work or whether it will keep Outlook relevant to those who live on Facebook and LinkedIn.  But among the other features, there’s very little not to like.   OneNote To me, OneNote is the part of Office that just keeps getting better.  There is one major caveat to this, which I’ll cover in a moment, but let’s first catalog what new stuff OneNote 2010 brings.  The best part of OneNote, is the way each of its versions have managed hierarchy: Notebooks have sections, sections have pages, pages have sub pages, multiple notes can be contained in either, and each note supports infinite levels of indentation.  None of that is new to 2010, but the new version does make creation of pages and subpages easier and also makes simple work out of promoting and demoting pages from sub page to full page status.  And relationships between pages are quite easy to create now: much like a Wiki, simply typing a page’s name in double-square-brackets (“[[…]]”) creates a link to it. OneNote is also great at integrating content outside of its notebooks.  With a new Dock to Desktop feature, OneNote becomes aware of what window is displayed in the rest of the screen and, if it’s an Office document or a Web page, links the notes you’re typing, at the time, to it.  A single click from your notes later on will bring that same document or Web page back on-screen.  Embedding content from Web pages and elsewhere is also easier.  Using OneNote’s Windows Key+S combination to grab part of the screen now allows you to specify the destination of that bitmap instead of automatically creating a new note in the Unfiled Notes area.  Using the Send to OneNote buttons in Internet Explorer and Outlook result in the same choice. Collaboration gets better too.  Real-time multi-author editing is better accommodated and determining author lineage of particular changes is easily carried out. My one pet peeve with OneNote is the difficulty using it when I’m not one a Windows PC.  OneNote’s main competitor, Evernote, while I believe inferior in terms of features, has client versions for PC, Mac, Windows Mobile, Android, iPhone, iPad and Web browsers.  Since I have an Android phone and an iPad, I am practically forced to use it.  However, the OneNote Web app should help here, as should a forthcoming version of OneNote for Windows Phone 7.  In the mean time, it turns out that using OneNote’s Email Page ribbon button lets you move a OneNote page easily into EverNote (since every EverNote account gets a unique email address for adding notes) and that Evernote’s Email function combined with Outlook’s Send to OneNote button (in the Move group of the ribbon’s Home tab) can achieve the reverse.   Access To me, the big change in Access 2007 was its tight integration with SharePoint lists.  Access 2010 and SharePoint 2010 continue this integration with the introduction of SharePoint’s Access Services.  Much as Excel Services provides a SharePoint-hosted experience for viewing (and now editing) Excel spreadsheet, PivotTable and chart content, Access Services allows for SharePoint browser-hosted editing of Access data within the forms that are built in the Access client itself. To me this makes all kinds of sense.  Although it does beg the question of where to draw the line between Access, InfoPath, SharePoint list maintenance and SharePoint 2010’s new Business Connectivity Services.  Each of these tools provide overlapping data entry and data maintenance functionality. But if you do prefer Access, then you’ll like  things like templates and application parts that make it easier to get off the blank page.  These features help you quickly get tables, forms and reports built out.  To make things look nice, Access even gets its own version of Excel’s Conditional Formatting feature, letting you add data bars and data-driven text formatting.   Word As I said at the beginning of this post, upgrades to Office are about much more than enhancing the suite’s flagship word processing application. So are there any enhancements in Word worth mentioning?  I think so.  The most important one has to be the collaboration features.  Essentially, when a user opens a Word document that is in a SharePoint document library (or Windows Live SkyDrive folder), rather than the whole document being locked, Word has the ability to observe more granular locks on the individual paragraphs being edited.  Word also shows you who’s editing what and its Save function morphs into a sync feature that both saves your changes and loads those made by anyone editing the document concurrently. There’s also a new navigation pane that lets you manage sections in your document in much the same way as you manage slides in a PowerPoint deck.  Using the navigation pane, you can reorder sections, insert new ones, or promote and demote sections in the outline hierarchy.  Not earth shattering, but nice.   Other Apps and Summarized Findings What about InfoPath, Publisher, Visio and Project?  I haven’t looked at them yet.  And for this post, I think that’s fine.  While those apps (and, arguably, Access) cater to specific tasks, I think the apps we’ve looked at in this post service the general purpose needs of most users.  And the theme in those 2010 apps is clear: collaboration is key, the Web and productivity are indivisible, and making data and analytics into a self-service amenity is the way to go.  But perhaps most of all, features are still important, as long as they get you through your day faster, rather than adding complexity for its own sake.  I would argue that this is true for just about every product Microsoft makes: users want utility, not complexity.

    Read the article

  • Recursion in Ecore-File?!

    - by Dominik
    Hey guys, just tried to convert towards a Ecore-Model from a given UML-Model. After this I am trying to create a Generator Model. Everytime I try to do this I get the Error Message, that there is a "Unhandled event loop exception" with this log: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException) at org.eclipse.swt.SWT.error(SWT.java:3884) at org.eclipse.swt.SWT.error(SWT.java:3799) at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:137) at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3885) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3506) at org.eclipse.jface.window.Window.runEventLoop(Window.java:825) at org.eclipse.jface.window.Window.open(Window.java:801) at org.eclipse.gmf.internal.bridge.ui.dashboard.DashboardMediator$RunWizardAction.run(DashboardMediator.java:316) at org.eclipse.gmf.internal.bridge.ui.dashboard.HyperlinkFigure$1.mousePressed(HyperlinkFigure.java:63) at org.eclipse.draw2d.Figure.handleMousePressed(Figure.java:873) at org.eclipse.draw2d.SWTEventDispatcher.dispatchMousePressed(SWTEventDispatcher.java:214) at org.eclipse.draw2d.LightweightSystem$EventHandler.mouseDown(LightweightSystem.java:513) at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:179) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3910) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3503) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311) Caused by: java.lang.NullPointerException at org.eclipse.emf.converter.util.ConverterUtil.computeRequiredPackages(ConverterUtil.java:374) at org.eclipse.emf.converter.ui.contribution.base.ModelConverterPackagePage.validate(ModelConverterPackagePage.java:965) at org.eclipse.emf.importer.ui.contribution.base.ModelImporterPackagePage.validate(ModelImporterPackagePage.java:101) at org.eclipse.emf.converter.ui.contribution.base.ModelConverterPackagePage$1.run(ModelConverterPackagePage.java:155) at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35) at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134) ... 34 more After this there occurs another exception with this text: "Unable to create editor ID org.eclipse.emf.codegen.ecore.genmodel.presentation.GenModelEditorID:An unexpected exception was thrown." The session data says: eclipse.buildId=unknown java.version=1.6.0_13 java.vendor=Sun Microsystems Inc. BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE Framework arguments: -product org.eclipse.epp.package.modeling.product Command-line arguments: -os win32 -ws win32 -arch x86 -product org.eclipse.epp.package.modeling.product -consoleLog With this long log: java.lang.NullPointerException at org.eclipse.emf.ecore.util.EcoreUtil.getURI(EcoreUtil.java:2887) at org.eclipse.emf.codegen.ecore.genmodel.impl.GenModelImpl.diagnose(GenModelImpl.java:2930) at org.eclipse.emf.codegen.ecore.genmodel.presentation.GenModelEditor.validate(GenModelEditor.java:1773) at org.eclipse.emf.codegen.ecore.genmodel.presentation.GenModelEditor.initialize(GenModelEditor.java:596) at org.eclipse.emf.codegen.ecore.genmodel.presentation.GenModelEditor.createPages(GenModelEditor.java:1080) at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:357) at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:662) at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:462) at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595) at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:286) at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2857) at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2762) at org.eclipse.ui.internal.WorkbenchPage.access$11(WorkbenchPage.java:2754) at org.eclipse.ui.internal.WorkbenchPage$10.run(WorkbenchPage.java:2705) at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2701) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2685) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2668) at org.eclipse.emf.converter.ui.contribution.base.ModelConverterWizard.openEditor(ModelConverterWizard.java:318) at org.eclipse.emf.importer.ui.contribution.base.ModelImporterWizard.performFinish(ModelImporterWizard.java:167) at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:752) at org.eclipse.gmf.internal.bridge.ui.dashboard.DashboardMediator$RunWizardAction$1.finishPressed(DashboardMediator.java:311) at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:373) at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624) at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:228) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3910) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3503) at org.eclipse.jface.window.Window.runEventLoop(Window.java:825) at org.eclipse.jface.window.Window.open(Window.java:801) at org.eclipse.gmf.internal.bridge.ui.dashboard.DashboardMediator$RunWizardAction.run(DashboardMediator.java:316) at org.eclipse.gmf.internal.bridge.ui.dashboard.HyperlinkFigure$1.mousePressed(HyperlinkFigure.java:63) at org.eclipse.draw2d.Figure.handleMousePressed(Figure.java:873) at org.eclipse.draw2d.SWTEventDispatcher.dispatchMousePressed(SWTEventDispatcher.java:214) at org.eclipse.draw2d.LightweightSystem$EventHandler.mouseDown(LightweightSystem.java:513) at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:179) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3910) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3503) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311) Has anyone an idea what is going wrong? I looked a while at my model but were not able to find something wrong. I just thought there might be a recursion due to the "Unhandled event loop exception" but is this even possible? Thanks in advance, Dominik

    Read the article

  • I need help in inno setup custom page

    - by vinutavishal
    in inno setup i hav created a custom page with following code and has 3 text boxes now i want to validate that text box on custom form next button click if in text.text='2121212' something text is entered by user then only next button enabled pls help any one its urgent [CustomMessages] CustomForm_Caption=CustomForm Caption CustomForm_Description=CustomForm Description CustomForm_Label1_Caption0=College Name: CustomForm_Label2_Caption0=Product Type: CustomForm_Label3_Caption0=Product ID: [Code] var Label1: TLabel; Label2: TLabel; Label3: TLabel; Edit1: TEdit; Edit2: TEdit; Edit3: TEdit; Edit4: TEdit; Edit5: TEdit; Edit6: TEdit; { CustomForm_Activate } procedure CustomForm_Activate(Page: TWizardPage); begin // enter code here... end; { CustomForm_ShouldSkipPage } function CustomForm_ShouldSkipPage(Page: TWizardPage): Boolean; begin Result := False; end; { CustomForm_BackButtonClick } function CustomForm_BackButtonClick(Page: TWizardPage): Boolean; begin Result := True; end; { CustomForm_NextkButtonClick } function CustomForm_NextButtonClick(Page: TWizardPage): Boolean; begin RegWriteStringValue(HKEY_LOCAL_MACHINE, 'Software\SGS2.2\CS', 'College Name', Edit1.Text); RegWriteStringValue(HKEY_LOCAL_MACHINE, 'Software\SGS2.2\CS', 'Product Type', Edit2.Text); RegWriteStringValue(HKEY_LOCAL_MACHINE, 'Software\SGS2.2\CS', 'Product ID', Edit3.Text); Result := True; end; { CustomForm_CancelButtonClick } procedure CustomForm_CancelButtonClick(Page: TWizardPage; var Cancel, Confirm: Boolean); begin // enter code here... end; { CustomForm_CreatePage } function CustomForm_CreatePage(PreviousPageId: Integer): Integer; var Page: TWizardPage; begin Page := CreateCustomPage( PreviousPageId, ExpandConstant('{cm:CustomForm_Caption}'), ExpandConstant('{cm:CustomForm_Description}') ); { Label1 } Label1 := TLabel.Create(Page); with Label1 do begin Parent := Page.Surface; Caption := ExpandConstant('{cm:CustomForm_Label1_Caption0}'); Left := ScaleX(16); Top := ScaleY(24); Width := ScaleX(70); Height := ScaleY(13); end; { Label2 } Label2 := TLabel.Create(Page); with Label2 do begin Parent := Page.Surface; Caption := ExpandConstant('{cm:CustomForm_Label2_Caption0}'); Left := ScaleX(17); Top := ScaleY(56); Width := ScaleX(70); Height := ScaleY(13); end; { Label3 } Label3 := TLabel.Create(Page); with Label3 do begin Parent := Page.Surface; Caption := ExpandConstant('{cm:CustomForm_Label3_Caption0}'); Left := ScaleX(17); Top := ScaleY(88); Width := ScaleX(70); Height := ScaleY(13); end; { Edit1 } Edit1 := TEdit.Create(Page); with Edit1 do begin Parent := Page.Surface; Left := ScaleX(115); Top := ScaleY(24); Width := ScaleX(273); Height := ScaleY(21); TabOrder := 0; end; { Edit2 } Edit2 := TEdit.Create(Page); with Edit2 do begin Parent := Page.Surface; Left := ScaleX(115); Top := ScaleY(56); Width := ScaleX(273); Height := ScaleY(21); TabOrder := 1; end; { Edit3 } Edit3 := TEdit.Create(Page); with Edit3 do begin Parent := Page.Surface; Left := ScaleX(115); Top := ScaleY(88); Width := ScaleX(273); Height := ScaleY(21); TabOrder := 2; end; with Page do begin OnActivate := @CustomForm_Activate; OnShouldSkipPage := @CustomForm_ShouldSkipPage; OnBackButtonClick := @CustomForm_BackButtonClick; OnNextButtonClick := @CustomForm_NextButtonClick; OnCancelButtonClick := @CustomForm_CancelButtonClick; end; Result := Page.ID; end; { CustomForm_InitializeWizard } procedure InitializeWizard(); begin CustomForm_CreatePage(wpWelcome); end;

    Read the article

  • iPhone Store Kit "Cannot connect to iTunes Store"

    - by lucasharding
    Hi, I am working on adding In-App purchases to my app. I am able to receive the productsRequest:didReceiveResponse method, and receive the array of products. My problem arises when I add a SKPayment to the SKPaymentQueue. After I add the product to the queue, in the paymentQueue:updatedTransactions method the transactions always have the state SKPaymentTransactionStateFailed. I NSLog the "transaction.error" and this is what it returns: Error Domain=SKErrorDomain Code=0 UserInfo=0x165000 "Cannot connect to iTunes Store" I have logged out of the Store in the Settings app, but after trying to purchase a product in my app it never asks me to log in with my test account. It just fails with the above error. Thanks in advance.

    Read the article

  • WiX unresolved reference error

    - by David
    I'm using Wix version 3.0.5419.0. I have two .wxs files, one which is a fragment, and another which uses the fragment to create the .msi file. Here is the file which uses the fragment (DaisyFarmer.wxs): <?xml version='1.0' encoding='windows-1252'?> <Wix xmlns='http://schemas.microsoft.com/wix/2006/wi' xmlns:iis='http://schemas.microsoft.com/wix/IIsExtension'> <Product Name='Daisy Web Site 1.0' Id='BB7FBBE4-0A25-4cc7-A39C-AC916B665220' UpgradeCode='8A5311DE-A125-418f-B0E1-5A30B9C667BD' Language='1033' Codepage='1252' Version='1.0.0' Manufacturer='the man'> <Package Id='5F341544-4F95-4e01-A2F8-EF74448C0D6D' Keywords='Installer' Description="desc" Manufacturer='the man' InstallerVersion='100' Languages='1033' Compressed='yes' SummaryCodepage='1252' /> <Media Id='1' Cabinet='Sample.cab' EmbedCab='yes' DiskPrompt="CD-ROM #1" /> <Property Id='DiskPrompt' Value="the man" /> <PropertyRef Id="NETFRAMEWORK35"/> <Condition Message='This setup requires the .NET Framework 3.5.'> <![CDATA[Installed OR (NETFRAMEWORK35)]]> </Condition> <Feature Id='DaisyFarmer' Title='DaisyFarmer' Level='1'> <ComponentRef Id='SchedulerComponent' /> </Feature> </Product> </Wix> The fragment I'm referencing is (Scheduler.wxs): <?xml version="1.0" encoding="utf-8"?> <Wix xmlns="http://schemas.microsoft.com/wix/2006/wi"> <Fragment> <DirectoryRef Id="TARGETDIR"> <Directory Id="dir2787390E4B7313EB8005DE08108EFEA4" Name="scheduler"> <Component Id="SchedulerComponent" Guid="{9254F7E1-DE41-4EE5-BC0F-BA668AF051CB}"> <File Id="fil9A013D0BFB837BAC71FED09C59C5501B" KeyPath="yes" Source="SourceDir\DTBookMonitor.exe" /> <File Id="fil4F0D8D05F53E6AFBDB498E7C75C2D98F" KeyPath="no" Source="SourceDir\DTBookMonitor.exe.config" /> <File Id="filF02F4686267D027CB416E044E8C8C2FA" KeyPath="no" Source="SourceDir\monitor.bat" /> <File Id="fil05B8FF38A3C85FE6C4A58CD6FDFCD2FB" KeyPath="no" Source="SourceDir\output.txt" /> <File Id="fil397F04E2527DCFDF7E8AC1DD92E48264" KeyPath="no" Source="SourceDir\pipelineOutput.txt" /> <File Id="fil83DFACFE7F661A9FF89AA17428474929" KeyPath="no" Source="SourceDir\process.bat" /> <File Id="fil2809039236E0072642C52C6A52AD6F2F" KeyPath="no" Source="SourceDir\README.txt" /> </Component> </Directory> </DirectoryRef> </Fragment> </Wix> I then run the following commands: candle -ext WixUtilExtension -ext WiXNetFxExtension DaisyFarmer.wxs Scheduler.wxs light -sice:ICE20 -ext WixUtilExtension -ext WiXNetFxExtension Scheduler.wixobj DaisyFarmer.wixobj -out DaisyFarmer.msi I'm getting an error when I run light.exe which says "DaisyFarmer.wxs(20) : error LGHT0094 : Unresolved reference to symbol 'Component:SchedulerComponent' in section 'Product:{BB7FBBE4-0A25-4CC7-A39C-AC916B665220}'." What am I missing?

    Read the article

  • Error when logging in with Machinist in Shoulda test

    - by user303747
    I am having some trouble getting the right usage of Machinist and Shoulda in my testing. Here is my test: context "on POST method rating" do p = Product.make u = nil setup do u = login_as post :vote, :rating => 3, :id => p end should "set rating for product to 3" do assert_equal p.get_user_vote(u), 3 end And here's my blueprints: Sham.login { Faker::Internet.user_name } Sham.name { Faker::Lorem.words} Sham.email { Faker::Internet.email} Sham.body { Faker::Lorem.paragraphs(2)} User.blueprint do login password "testpass" password_confirmation { password } email end Product.blueprint do name {Sham.name} user {User.make} end And my authentication test helper: def login_as(u = nil) u ||= User.make() @controller.stubs(:current_user).returns(u) u end The error I get is: /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/validations.rb:1090:in `save_without_dirty!': Validation failed: Login has already been taken, Email has already been taken (ActiveRecord::RecordInvalid) from /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/dirty.rb:87:in `save_without_transactions!' from /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/transactions.rb:200:in `save!' from /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/connection_adapters/abstract/database_statements.rb:136:in `transaction' from /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/transactions.rb:182:in `transaction' from /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/transactions.rb:200:in `save!' from /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/transactions.rb:208:in `rollback_active_record_state!' from /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/transactions.rb:200:in `save!' from /usr/lib/ruby/gems/1.8/gems/machinist-1.0.6/lib/machinist/active_record.rb:55:in `make' from /home/jason/moderndarwin/test/blueprints.rb:37 from /usr/lib/ruby/gems/1.8/gems/machinist-1.0.6/lib/machinist.rb:77:in `generate_attribute_value' from /usr/lib/ruby/gems/1.8/gems/machinist-1.0.6/lib/machinist.rb:46:in `method_missing' from /home/jason/moderndarwin/test/blueprints.rb:37 from /usr/lib/ruby/gems/1.8/gems/machinist-1.0.6/lib/machinist.rb:20:in `instance_eval' from /usr/lib/ruby/gems/1.8/gems/machinist-1.0.6/lib/machinist.rb:20:in `run' from /usr/lib/ruby/gems/1.8/gems/machinist-1.0.6/lib/machinist/active_record.rb:53:in `make' from ./test/functional/products_controller_test.rb:25:in `__bind_1269805681_945912' from /home/jason/moderndarwin/vendor/gems/thoughtbot-shoulda-2.10.2/lib/shoulda/context.rb:293:in `call' from /home/jason/moderndarwin/vendor/gems/thoughtbot-shoulda-2.10.2/lib/shoulda/context.rb:293:in `merge_block' from /home/jason/moderndarwin/vendor/gems/thoughtbot-shoulda-2.10.2/lib/shoulda/context.rb:288:in `initialize' from /home/jason/moderndarwin/vendor/gems/thoughtbot-shoulda-2.10.2/lib/shoulda/context.rb:169:in `new' from /home/jason/moderndarwin/vendor/gems/thoughtbot-shoulda-2.10.2/lib/shoulda/context.rb:169:in `context' from ./test/functional/products_controller_test.rb:24 I can't figure out what it is I'm doing wrong... I have tested the login_as with my auth (Authlogic) in my user_controller testing. Any pointers in the right direction would be much appreciated!

    Read the article

  • How to pass string file path as HttpPostedfile to fileupload control?

    - by rahul
    Hi friends, I have got little tricky issue i.e I am using API of a product which has few methods for uploading image. The UI part of the product has one file upload control which takes files and convert that into binary and save it to database. In the coding part they are using one method where they send this fileupload.postedfile as one of the input parameter to the method. Now my requirement is, I have a directory where there are hundred of files which i have to send each file one by after another to this method as a input. Now i wish to know how to pass a file name as "HttpPostedFile" to that method as a parameter. I have no other option other than using that API (our clients requirement). Thanks

    Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >