Search Results

Search found 4417 results on 177 pages for 'purpose'.

Page 118/177 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

• external drive enclosure -> software RAID 5?

  - by memilanuk

  Hello all, I have two older PCs on my LAN posing as 'servers'... one running FreeNAS off a USB stick using three 500GB hdds in a ZFS RAID-Z pool serving as storage for the LAN and one running Debian Lenny with an 80GB drive used as a general purpose 'tinker' box that I can ssh into, etc. Problem is that the SMART report for one of those 500GB drives in the FreeNAS box is showing some pre-failure attributes, and the whole array is a little small anyways. Rather than simply replace one 500GB drive with another 500GB drive, and have no backup of the file server, I'd like to upgrade all the drives to 2TB ones - but I have no where to store that much data in the mean while. As such, I started looking at getting a 4-bay external drive enclosure with an eSATA card for the Debian box, with the hopes of creating a RAID5 + LVM setup using those drives and backing the data up to that external drive enclosure. After the backup is done, replace the drives in the FreeNAS box and rebuild the array there and mirror the data back. Then, I'd have both the primary storage (on the FreeNAS box) and a backup (which I don't have currently) using the external drive enclosure on the Debian box. My big question is... most of these external drive boxes seem to claim support for JBOD, RAID 0, 1, 10, 5, etc. - should I presume that is simply fake RAID like many commodity mobos have, and not really usable in Linux? In that case, with all the drives hanging off the one eSATA connection, will Linux (specifically Debian Squeeze, as I plan on upgrading that box here shortly) see all four drives, or just the first one? Will I be able to configure them in a RAID5 array as desired? Thanks, Monte

  Read the article

• Domain Environment + Certificate Authority + Server 2008 R2

  - by user1110302

  I have recently been delegated the task to setup a CA in our domain environment and have a question on why Microsoft does somethings the way they do lol. I have been trying to read up on what the best practices are for going about this task, and have decided that in an ideal CA environment you should have one “offline” Root CA, and then two subordinate CAs for redundancy/issuing the certs. That is all good, I understand how this works and why, but in messing with a sandbox I have setup, the way you go about adding certificate authorities to a domain environment seems extremely trivial and against all of their best practices… Dooes anyone know what the purpose is of an Enterprise Root CA that is integrated into Active Directory? From what I have read, once you setup an Enterprise Root CA that is integrated into Active Directory, it stays with Active Directory for the long haul and must not be turned off/renamed/touched under any circumstances. If this is true, that seems to go against the practice of setting up a standalone root CA, adding the subordinates, and then taking the root offline. Thanks for any feedback you may have to offer!

  Read the article

• Failed to bring up eth1 in a dual ips solution in ubuntu

  - by lxyu

  I'm using ubuntu 12.04. I tried to assign two ips to two ethernet cards in my server. The content of /etc/network/interfaces is like this: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 114.80.156.a netmask 255.255.255.224 gateway 114.80.156.b auto eth1 iface eth1 inet static address 114.80.156.c netmask 255.255.255.240 gateway 114.80.156.d a b c d have different values, which means the two ips are in different vlans. But I can only bring up eth0 with this command: $ /etc/init.d/networking restart RTNETLINK answers: File exists Failed to bring up eth1. ...done. I have checked the question here which shows the same problem like the one I encountered: Can only bring up one of two interfaces But it seems it's not really solved. And in my situation, I need the 2 ips to use 2 different gateways. So how to fix this problem? Edit1, changed the example config ip from 192.168.0.0/16 subnet to another 'real' subnet. Edit2, the purpose of doing this is fairly simple. Because the ip range I previous in don't have more room for new servers, and I have to move to another ip range. So I want to make the public servers bind to 2 ips for the transition period. I only have really limited knowledge about routing and subnet. @BillThor @rackandboneman, would you please give me some keywords or links on how to setup route for 2 ips? and @Mike Pennington, how do you know I speak chinese?

  Read the article

• How to create an MST for silent install using Orca?

  - by Sanarothe

  Hi. I'm trying to deploy 7zip via GPO; I assigned the original MSI, but the package installation simply doesn't take place. What I've gathered is that I need to create an MST. In the spirit of trying to learn as much as possible about it, I've opted to use Orca rather than a third-party automagic tool, but I'm at a loss as to which fields to edit. So far the only change that I've made is to give the license accepted checkbox a value of "1" instead of pointing to another key that, still, just gave it a value of "1." So, to give this some structure, How does (Or what criteria should I consider) creating a MST make the install noninteractive/silent? Do you have to manually reconfigure the MSI to simply not perform the GUI aspects? Or do I have to execute the program in silent mode after defining the variables the the installer requests? (Though, of course, it seems that would defeat the purpose of the MST) How do I determine which fields I need to edit? I've loaded the installer and it takes three inputs: License acceptance, feature set and installation location. I want all of the default values: I'm just trying to deploy it at all, not customize the installation. I BELIEVE that I should be messing with some values in the Registry table, but I really don't know. If I'm not asking the right questions, can someone point me to a THOROUGH resource or documentation for this process? I've already gone over the technet articles on basic Orca use and deployment, but I couldn't really find anything on creating MST that didn't involve a third party program in which one runs a 'dummy' installer to get the before and after snapshots. Thank you very much, Cameron UPDATE: After spending the day troubleshooting, I finally got my server to send out 7zip, but not until I had also assigned firefox. Not sure why it didn't want to send out 7zip by itself, but I also had some domain naming problems. Thanks for the input (GPResult helped enormously.)

  Read the article

• Apache/Passenger and cpulimit

  - by Dave Smylie

  I run a ruby on rails site that processes email - the email is dumped directly into the web app via a POST from postfix. At times I can get a burst of email coming in causing a prolonged surge in CPU usage making my VPS provider understandable unhappy with me. These emails don't need to be processed in a timely manner - they just need to be (eventually) processed. Obviously I can't just nice the process as that only looks at the cpu usage on my VPS and can't take into account the cpu usage on the other VPS's. I have found a utility called cpulimit that will you put hard limits on cpu usage for a particular process. (eg 20%). This seems ideal for this purpose, but I can't work out to integrate with apache/passenger. Passenger starts up a ruby process for each server and restarts them periodically. Each time the pid will change. Cpulimit needs to be given a pid number for it to act on. Anyone got any ideas how I could get passenger to fire off a call this command when it's starting up this particular virtual host?

  Read the article

• Virtual Machines and Automatic Software Updates

  - by Zian Choy

  It's obvious that one's main computer should always be have all the latest security patches and most people don't blink an eye when Microsoft Update installs non-security updates. In the land of virtual machines, I've run into 2 problems with automatic updates: The virtual machines are only run when needed. Only Windows virtual machines seem to patch themselves. To elaborate on #1, I generally make a virtual machine with a purpose in mind. For example, when I needed an old copy of Internet Explorer to reproduce a bug in RSS Bandit, I had a Virtual PC named RSS Bandit. The machine only stayed running for a few minutes at a time. Consequently, there is no downtime for the machine to download updates at 3 AM. To elaborate on #2, I've noticed that if I haven't run a Windows virtual machine in a while, then the moment I log in, the computer frantically downloads updates and within seconds, if I click the Start button, there is a little orange shield next to the "Shutdown" button. However, I ran a freshly created Ubuntu VM for several hours today with hundreds of updates pending and it seemed to never download any of them or install any of them. Is there any reason to be concerned about running VMs with dozens of security holes? If I should be concerned, then is there any way to get Ubuntu to download and install updates rather than just advertising a long list of updates to download next century? I've already tried telling Ubuntu to automatically download and install updates.

  Read the article

• Skype Connect as SIP/Trunk for Asterisk

  - by Kaurin

  First off: I'm not sure if this should be on superuser or here. I have recently built a few Asterisk boxes with OpenVOX FXO/FXS ports little or no trouble. My current project is building an Asterisk box with SIP trunks. My current employer insisted on getting Skype Business/Skype connect for that purpose. After reviewing the Skype Connect plan, I agreed, because I thought it is going to be straightforward: Purchase G729 licences and setup SIP trunk/trunks. Boy was i wrong :) Here is the setup: The setup is for calling US numbers only via skype (we got skype US minute bundles in skype connect) AsteriskNOW - Asterisk 1.4 + asterisk-gui Trunks: SIP Trunk configured with Skype Connect - shows as registered Users: 2 test extensions. Both work fine when calling each other, voicemail etc works fine too The asterisk box is behind a Mikrotik router which i configured to forward all relevant ports: 5060-5090 UDP, 10000-20000 UDP. When trying out an extension outside of my LAN, it worked. I could make calls to the other extension. Outgoing rule: _NXXXXXXXXX Strip:0 Prepend:+1 Use skype trunk Inbound rule: Trunk: Skype Pattern: s Destination: Extension1 (6210) Here is the output of asterisk CLI (-rvvvvv) with outgoing calls: http://pastebin.com/eWVpL72e you can see the circuit-busy response when using trunk1 (skype) When calling my Skype Connect number from the outside, I get nothing in the logs. Can anyone with Skype Connect / Asterisk experience help out? :)

  Read the article

• Win Server 2k and Win 7 client

  - by Ray Kruse

  I have a Win Server 2000 system with AD configured. The network consists of an OKI printer, a network server, a wifi router a Win 2k client and the server. I'm trying to connect a Win 7 client. The purpose of the network, besides sharing equipment is to move files from client to client and scatter backups over more than 1 machine. The Win 7 client is configured for DHCP and does in fact receive it's IP and DNS configuration from the server and it sees the printer, wifi router and network drive, but does not see the Win 2k client nor the Win 2k server. I have tried the LAN Management Authentication Level set to 'Send LM & NTLM responses' with the 128 bit encryption removed. I've also done the registry hack on the key 'LmCompatibilityLevel'. Neither of these have helped. I have two questions: Is there a fix or is Win 2k totally incompatible? Is the best (or quickest/cheapest) fix to upgrade the server to Win 2k3 and not worry about the Win 2k client? Thanks for any help. Ray Kruse Buffalo, KY

  Read the article

• snort analysis of wireshark capture

  - by Ben Voigt

  I'm trying to identify trouble users on our network. ntop identifies high traffic and high connection users, but malware doesn't always need high bandwidth to really mess things up. So I am trying to do offline analysis with snort (don't want to burden the router with inline analysis of 20 Mbps traffic). Apparently snort provides a -r option for this purpose, but I can't get the analysis to run. The analysis system is gentoo, amd64, in case that makes any difference. I've already used oinkmaster to download the latest IDS signatures. But when I try to run snort, I keep getting the following error: % snort -V ,,_ -*> Snort! <*- o" )~ Version 2.9.0.3 IPv6 GRE (Build 98) x86_64-linux '''' By Martin Roesch & The Snort Team: http://www.snort.org/snort/snort-team Copyright (C) 1998-2010 Sourcefire, Inc., et al. Using libpcap version 1.1.1 Using PCRE version: 8.11 2010-12-10 Using ZLIB version: 1.2.5 %> snort -v -r jan21-for-snort.cap -c /etc/snort/snort.conf -l ~/snortlog/ (snip) 273 out of 1024 flowbits in use. [ Port Based Pattern Matching Memory ] +- [ Aho-Corasick Summary ] ------------------------------------- | Storage Format : Full-Q | Finite Automaton : DFA | Alphabet Size : 256 Chars | Sizeof State : Variable (1,2,4 bytes) | Instances : 314 | 1 byte states : 304 | 2 byte states : 10 | 4 byte states : 0 | Characters : 69371 | States : 58631 | Transitions : 3471623 | State Density : 23.1% | Patterns : 3020 | Match States : 2934 | Memory (MB) : 29.66 | Patterns : 0.36 | Match Lists : 0.77 | DFA | 1 byte states : 1.37 | 2 byte states : 26.59 | 4 byte states : 0.00 +---------------------------------------------------------------- [ Number of patterns truncated to 20 bytes: 563 ] ERROR: Can't find pcap DAQ! Fatal Error, Quitting.. net-libs/daq is installed, but I don't even want to capture traffic, I just want to process the capture file. What configuration options should I be setting/unsetting in order to do offline analysis instead of real-time capture?

  Read the article

• Mod_Perl configuration for multiple domains

  - by daliaessam

  Reading the Mod_Perl module documentation, can we configure it on per domain basis, what I mean can we configure it to run on every domain or specific domain only. What I see in the docs is: Registry Scripts To enable registry scripts add to httpd.conf: Alias /perl/ /home/httpd/2.0/perl/ <Location /perl/> SetHandler perl-script PerlResponseHandler ModPerl::Registry PerlOptions +ParseHeaders Options +ExecCGI </Location> and now assuming that we have the following script: #!/usr/bin/perl print "Content-type: text/plain\n\n"; print "mod_perl 2.0 rocks!\n"; saved in /home/httpd/httpd-2.0/perl/rock.pl. Make the script executable and readable by everybody: % chmod a+rx /home/httpd/httpd-2.0/perl/rock.pl Of course the path to the script should be readable by the server too. In the real world you probably want to have a tighter permissions, but for the purpose of testing, that things are working, this is just fine. From what I understand above, we can run Perl scripts only from one specific folder that we put the directive above. So the question again, can we make this directive per domain for all domains or for specific number of domains?

  Read the article

• is it worth to use load balancer on web server/website

  - by user427969

  I have a website and a while ago, the web server of the company hosting my website was down for about a day. I consulted the company for a solution on how i can stop this from happening in future and they suggested to have a second machine and which will be connected to my current website/web server by a "load balancer" (at an additional huge cost!!!). The second machine will be replicate of the first one and so if i goes down, the other will always be running. ---- Explanation ----- My hosting company suggested that it will be a good idea to have a second machine running at the same time and both the machines will be connected by a load balancer which reduces the rist of a downtime. The second machine will be a mirror of the first and any changes to first must be replicated in the second. I don't mind spending money if it really saves my website from going down. I want to know is it worth having this "load balancer" for my purpose? My website is a 24/7 service. I cannot afford an outage of 24 hours/1 hour. I don't mind using this "load balancer" as far as it is really worth. I am not sure if its just a marketing trick of my hosting company or really a "best" solution Thanks for help. Regards

  Read the article

• weird POST request in IIS logs

  - by MIrrorMirror

  I noticed weird log entries (unless there's something i don't understand) in my IIS (7.5) logs. it's an online dictionary with requests ( user friendly url rewriting ) and most of them are GET. However I noticed weird POST requests which are taking place by a person who is trying to crawl our content ( tens of thousands of such requests ) 2013-11-09 20:39:27 GET /dict/mylang/word1 - y.y.y.y Mozilla/5.0+(compatible;+Googlebot/2.1;++http://www.google.com/bot.html) - 200 296 2013-11-09 20:39:29 GET /dict/mylang/word2 - z.z.z.z Mozilla/5.0+(iPhone;+CPU+iPhone+OS+6_0+like+Mac+OS+X)+AppleWebKit/536.26+(KHTML,+like+Gecko)+Version/6.0+Mobile/10A5376e+Safari/8536.25+(compatible;+Googlebot-Mobile/2.1;++http://www.google.com/bot.html) - 200 468 2013-11-09 20:39:29 POST /dict/mylang/word3 - x.x.x.x - - 200 2593 The two first requests are legal. Now for the third request, I don't think I have allowed cross domain POST. if that what the third log line means. all those POST requests take that much time for unknown reasons to me. I would like to know how are those POST requests possible and how can I stop them. p.s. I have masked the IPs on purpose. any help would be appreciated! thank you in advance.

  Read the article

• Ubuntu rm not deleting files

  - by ILMV

  My colleague and I have been struggling with deleting a directory and its contents. We are working on a new version of our websites source code on Ubuntu 8.04 (dir: /var/www/websites), what we want to do is delete the websites directory and recreate it from a .tar backup we created a couple weeks ago. The purpose of this is so we can run our deployment procedure in a local environment before we do so on our live / public environment. We use this command: rm -r websites This deletes the directory and the files within it. The problem occurs when we un-tar our backup file and view the website we are getting files that don't exist in the .tar backup, in fact these files were only created a few days ago and should have been deleted. We delete the directory once more in the manner stated above, we then create a new websites directory using the mkdir command. Strangely at this stage the 'deleted files' do not come back, but if we unpack our .tar file the 'deleted files' appear again. Is there a way to ensure these files are deleted, or at least the pointers that associate them with said directory. Our .tar backup does not include these files We do not want to use the shred command We do not want to use 3rd party applications Solution should be functional via terminal (SSH) Many thanks! EDIT Er... we fixed it. Turns out the files that are reappearing are because of a link we have to another directory (outside the /var/www/websites), we were restoring the link but not deleting the files on the other end. D'oh! Many thanks for your help guys... friday afternoon syndrome :-)

  Read the article

• Intel Rapid Storage Technology (pre-OS) driver installation

  - by Nero theZero

  My desktop machine is built on Gigabyte GA-Z87-UD3H and Gigabyte provides the latest driver for Intel Rapid Storage Technology (IRST), which I installed after installing the OS. Same goes for my Lenovo Thinkpad-T420. And for both machine, checking the controller device under the IDE ATA/ATAPI Controllers section in Device Manager I see the driver has been updated to the latest version. I set the SATA controller to AHCI from BIOS On the desktop machine I have one WD 2TB BLACK & one WD 3TB Green I don’t use RAID, & no chance of using in near future, but according to Intel IRST improves performance in single disk scenario too. Now I have the following questions – What is the actual purpose of IRST (pre-OS install) driver that doesn’t get served with a post-OS driver that I installed? There must be some difference, otherwise there wouldn’t be a pre-OS version of the driver. Right? In the pre-OS procedure (loading the drivers at OS-installation time) after successfully completing the OS installation, do I need that post-OS driver? Because after installing from that one I got a quick launch icon that runs the IRST configuration application. Where do get that after installing the pre-OS driver? As it is “pre-OS”, when I load it at OS-installation time, does it updates anything at BIOS level or anywhere other than HDD? That’s because I’m going to dual boot Windows 7 with Windows 8.1, and after installing Windows 7 when I install Windows 8.1 & load the IRST driver for that, is there any chance of any “overwriting” or OS-incompatibility? In short, is there anything specific to follow while installing the second OS?

  Read the article

• GlusterFS on VMWare ESXi 5

  - by Dharmavir

  I want to build network file system on top of my VMWare ESXi based virtual nodes which are running Ubuntu 12.04 LTS. I am evalaluating options and found that GlusterFS (http://www.gluster.org/) can turn out to be a good choice. Purpose: I have about 2 dozen VM nodes with different configurations, on 2 physical nodes which has following configuration: 16 core Intel Xeon 1 TB 48 GB RAM Now as I said earlier each Physical server has about 1TB hdd and I can increase if I want additional so for now I have 2TB disk space available, these space is distributed in VM nodes I have created on which about 2 dozen VM nodes live. Now some of them being application server and mgmt server, they have plenty of free disk space which I want to utilize for some heavy storage which I can not design if I do that individually on single VM node. This way if my storage is distributed between dozens of VM nodes and about 2 or more physical nodes I have some sort of backup as well. I do not mind if data gets stored redundently but per my knowledge it might hapeen that individual VM nodes will not be able to store all of the data because complete data size for example if we take 100GB will exceed VM disk size of 70GB and then VM will also have system and program files on it. I need some suggestion that will GlusterFS be the solution for which I am looking forward to or I should go with something like hadoop? I am not too sure. But yes, I would like to utilize my free space on each VM node and while doing that if I get store data redundently I am okay because it will give me data security.

  Read the article

• Pentium 4 Willamette vs. Faster Celeron Northwood [closed]

  - by Synetech inc.

  Which is the preferable of the following two processors? Intel® Pentium® 4 Processor 1.70 GHz, 256K Cache, 400 MHz FSB Willamette Intel® Celeron® Processor 2.40 GHz, 128K Cache, 400 MHz FSB Northwood Details: A few months ago my motherboard died, so I bought a used computer that had a 2.4GHz Celeron. My old system had a 1.7GHz Pentium 4, so now I’m trying to decide which CPU to use. Obviously a P4 is preferable over a Celeron, but the Celeron is (significantly?) faster than the P4. I’m wondering if the faster Celeron might be better for certain tasks (ie, stronger but dumber is better at some things than smarter but weaker). I tried Googling for some reviews and comparisons for graphs to get a clear depiction of which is better overall, but found nothing that helped. (I did manage to find one page that indicates (apparently by poll, not benchmark) that the Celeron is better.) So which CPU should I use? Does anyone know of some graphs that I can use to compare the two? The system is a general-purpose machine for word-processing, Internet, and casual games (not Crysis, but not Solitaire either). It will be running Windows XP. The board is a 478 with 400MHz FSB.

  Read the article

• VirtualHost not using correct SSL certificate file

  - by Shawn Welch

  I got a doozy of a setup with my virtual hosts and SSL. I found the problem, I need a solution. The problem is, the way I have my virtual hosts and server names setup, the LAST VirtualHost directive is associating the SSL certificate file with the ServerName regardless of IP address or ServerAlias. In this case, SSL on www.site1.com is using the cert file that is established on the last VirtualHost; www.site2.com. Is this how it is supposed to work? This seems to be happening because both of them are using the same ServerName; but I wouldn't think this would be a problem. I am specifically using the same ServerName for a purpose and I really can't change that. So I need a good fix for this. Yes, I could buy another UCC SSL and have them both on it but I have already done that; these are actually UCC SSLs already. They just so happen to be two different UCC SSLs. <VirtualHost 11.22.33.44:80> ServerName somename ServerAlias www.site1.com UseCanonicalName On RewriteEngine On RewriteOptions Inherit </VirtualHost> <VirtualHost 11.22.33.44:443> ServerName somename ServerAlias www.site1.com UseCanonicalName On SSLEngine on SSLCertificateFile /usr/local/apache/conf/ssl.crt/cert1.crt SSLCertificateKeyFile /usr/local/apache/conf/ssl.key/cert1.key SSLCertificateChainFile /usr/local/apache/conf/chain/gd_bundle.crt RewriteEngine On RewriteOptions Inherit </VirtualHost> <VirtualHost 55.66.77.88:80> ServerName somename ServerAlias www.site2.com UseCanonicalName On RewriteEngine On RewriteOptions Inherit </VirtualHost> <VirtualHost 55.66.77.88:443> ServerName somename ServerAlias www.site2.com UseCanonicalName On SSLEngine on SSLCertificateFile /usr/local/apache/conf/ssl.crt/cert2.crt SSLCertificateKeyFile /usr/local/apache/conf/ssl.key/cert2.key SSLCertificateChainFile /usr/local/apache/conf/chain/gd_bundle.crt RewriteEngine On RewriteOptions Inherit </VirtualHost>

  Read the article

• How does the LeftHand SAN perform in a Production environment?

  - by Keith Sirmons

  Howdy, I previously asked this ServerFault question: Does anyone have experience with lefthands VSA SAN The general consensus looks like it does not perform well enough for a production SQL server even at a light load. So the new question is, How does LeftHand's SAN perform on the HP or Dell dedicated Hardware boxes? We are looking at the Starter SAN with 2 HP nodes in a 2-way replication, 2 ESX servers hosting a total of 2 Active Directory server, 1 MS SQL server, 1 File Server, and 1 General Purpose Server for things like Virus Scan (All Microsoft Server 2005 or 2008). The reason I am looking at LeftHand is for the complete software package. I plan to have a DR site and like how the SAN can perform an Async Replication to the offsite location without having to go back to the Vendor for more licenses. I also like the redundancy built into the Network Raid architecture. I have looked at other SANS and found different faults with them. For example, Dell's EqualLogic: Found that although the individual box is very redundant in hardware, the Data once spanned across multiple boxes is not redundant, if a node goes down you have lost the only copy of the data sitting on that hardware (One thing is certain, all hardware fails... When? is the only question.). I have used an XioTech SAN as well.. Well worth the money BTW, but I think it is overkill for the size of the office I am targeting. The cost to get the hardware redundancy in the XioTech makes it a little out of reach for the budget I am working in. Thank you, Keith

  Read the article

• Is it possible to use XP visual styles (*.msstyles) or Windows Blinds in a thinapp portable applicat

  - by Camilo Martin

  It's been a while since I made a portable (Office 2007) Thinapp application, and since then I've uninstalled VMWare from my machine to free up space, so I'd like to know if someone already knows the answer to this before I set up everything again to try it. I'm thinking of installing a visual style (*.msstyles, for XP) along with the application to thinapp before post-setup capture. Failing that, maybe I'll try with visual mods such as Windows Blinds. The purpose is to be able to run a portable application with a specific visual style. So my question is: Is it possible? (I believe it somehow is, since VirtualBox does something similar to XP Mode) If it is, will it work on a computer with the "classic" Windows style? If it's not, will it work with another virtualization software? (Xenocode?) If it's not possible with *.msstyles, will it work with visual mods such as Windows Blinds? Thanks for any input! (P.S.: Awfully tagged due to lack of relevant tags or 100+ rep to create a tag :P)

  Read the article

• Rebinding Keys on a Dell Keyboard

  - by Maarx

  I have a Dell Multimedia Keyboard, similar to this one: It has many non-standard keys, like the small circular ones across the top, and the "Multimedia" keys above INSERT/HOME/PAGE_UP. They can be rebound through simple registry entries. Some sample ones are included below: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey] [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\15] "ShellExecute"="C:\\Program Files (x86)\\Mozilla Firefox\\firefox.exe http://mail.google.com/mail/#inbox" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\16] "Association"=".cda" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\17] "ShellExecute"="C:\\Windows\\System32\\SnippingTool.exe" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\18] "ShellExecute"="calc.exe" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\7] "Association"="http" I've rebound the "MAIL" key to, instead of booting Outlook, to booting Firefox directed at my G-Mail account. I've rebound the button that would normally open "MY COMPUTER" to instead boot the Windows 7 "Snipping Tool", something I find very useful. Now, I'm looking to do some other things that I don't already know how to do. Note that answering this question doesn't necessarily require any knowledge about the keyboard or rebinding the keys: I can add, for any given key, a "ShellExecute" entry, and it will simply execute the following command as if it was typed at a Command Prompt. (I'm aware I dumbed that down rather significantly, but bear with me. I'm not really a Windows guy myself.) I use the volume knob for it's intended purpose, to change volume. I would like to change, however, a different key, to "reset" the Windows volume level back to exactly 50%, or, as it refers to it, "50", on it's 0-100 scale. I'm looking for the "program" (what I would type at a command prompt? these are still just Sys32 programs in the PATH, aren't they?) that, I imagine, would take arguments, to change Sound/Volume settings under Windows 7. Perhaps, for clarification, something that might take the form "C: SetVolume -slevel 50" or something.

  Read the article

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• Rapidly changing public IP addresses on certain networks?

  - by zenblender

  I run/develop an online game where many of our users are in southeast asia. I recently went to southeast asia and made an alarming discovery. Anywhere I got internet access, whether it was via 3G, a LAN in a hotel, or wifi in a cafe, both in Singapore and the Philippines, I noticed that my IP address was changing CONSTANTLY. I mean the public IP address, not the private one. I could load a page like whatismyip.com and just hit reload and see a new IP address show up every 5-10 seconds! This has lots of consequences for my online game, as many things "break" if the IP address changes for a given user. Basically, I would like to know more about this. Is there a name for the kind of network or router or paradigm that causes this, so I can read up on it? I don't understand WHY a network would function this way. Does it do this on purpose? Is it for security reasons? Is it to anonymize and protect the identity of the users? Or is it just an "old" method that is mostly obsolete in the rest of the world? Thanks for any info that will help me to understand.

  Read the article

• PHP 5.3.5 Windows installer missing php_ldap.dll

  - by nmjk

  I'm working with Windows Server 2008, Apache 2.2. I'm using php-5.3.5-Win32-VC6-x86.msi as the installer, using the threadsafe version. I've gone through the install process four or five times just to make sure that I'm not missing anything ridiculous, but I don't think I am. The problem is that the php_ldap.dll extension simply doesn't seem to exist. It's not present in the installer interface (where the user is asked to choose which extensions to install), and it definitely doesn't appear in the ext/ directory after install. I found a lot of mentions of this issue for 5.3.3, including links to download the extension individually. Those links no longer exist, of course, and besides: they were for 5.3.3. I'd really rather use an extension that belongs with PHP 5.3.5. Anyone else encounter this problem? Any ideas as to what's going wrong? Anyone seen acknowledgement by the PHP folks that the file is indeed missing, and that it's an oversight? It's quite a frustration because the server I'm building has no purpose if I don't have PHP LDAP support. Cheers all, and thanks in advance for your assistance.

  Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >