Search Results

Search found 3087 results on 124 pages for 'chi ping lee'.

Page 119/124 | < Previous Page | 115 116 117 118 119 120 121 122 123 124  | Next Page >

• Can't connect to local IP address on OSX

  - by Alex Worden

  I'm trying to connect to a webserver that's running on my mac OSX 1.6. I'm able to connect to it locally using http://127.0.0.1:8888/myapp but when I attempt to connect to it using my machine's local IP address (http://192.168.1.15:8888/myapp IP shown below) from the same machine (or another on the network) I cannot connect. I can ping the LAN IP address. I've tried adding IP forwarding to my router for port 8888 but it didn't help. I've checked and the OSX firewall is disabled Can anyone suggest what else is blocking the connection? Here's what I get when I run ifconfig: ~ :ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:1f:5b:e8:16:4d media: autoselect status: inactive supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::21e:c2ff:febf:4809%en1 prefixlen 64 scopeid 0x5 inet 192.168.1.15 netmask 0xffffff00 broadcast 192.168.1.255 ether 00:1e:c2:bf:48:09 media: autoselect status: active supported media: autoselect fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 4078 lladdr 00:1f:5b:ff:fe:2b:b3:3c media: autoselect <full-duplex> status: inactive supported media: autoselect <full-duplex> en5: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500 ether 00:1e:c2:8e:0f:45 media: autoselect status: inactive supported media: none autoselect 10baseT/UTP <half-duplex> en2: flags=8922<BROADCAST,SMART,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:1c:42:00:00:00 media: autoselect status: inactive supported media: autoselect en3: flags=8922<BROADCAST,SMART,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:1c:42:00:00:01 media: autoselect status: inactive supported media: autoselect

  Read the article

• MSDTC - Communication with the underlying transaction manager has failed (Firewall open, MSDTC netwo

  - by SocialAddict

  I'm having problems with my ASP.NET web forms system. It worked on our test server but now we are putting it live one of the servers is within a DMZ and the SQL server is outside of that (on our network still though - although a different subnet) I have open up the firewall completely between these two boxes to see if that was the issue and it still gives the error message "Communication with the underlying transaction manager has failed" whenever we try and use the "TransactionScope". We can access the data for retrieval it's just transactions that break it. We have also used msdtc ping to test the connection and with the amendments on the firewall that pings successfully, but the same error occurs! How do i resolve this error? Any help would be great as we have a system to go live today. Panic :) Edit: I have created a more straightforward test page with a transaction as below and this works fine. Could a nested transaction cause this kind of error and if so why would this only cause an issue when using a live box in a dmz with a firewall? AuditRepository auditRepository = new AuditRepository(); try { using (TransactionScope scope = new TransactionScope()) { auditRepository.Add(DateTime.Now, 1, "TEST-TRANSACTIONS#1", 1); auditRepository.Save(); auditRepository.Add(DateTime.Now, 1, "TEST-TRANSACTIONS#2", 1); auditRepository.Save(); scope.Complete(); } } catch (Exception ex) { Response.Write("Test Error For Transaction: " + ex.Message + "<br />" + ex.StackTrace); } This is the ErrorStack we are getting when the problem occurs: at System.Transactions.TransactionInterop.GetOletxTransactionFromTransmitterPropigationToken(Byte[] propagationToken) at System.Transactions.TransactionStatePSPEOperation.PSPEPromote(InternalTransaction tx) at System.Transactions.TransactionStateDelegatedBase.EnterState(InternalTransaction tx) at System.Transactions.EnlistableStates.Promote(InternalTransaction tx) at System.Transactions.Transaction.Promote() at System.Transactions.TransactionInterop.ConvertToOletxTransaction(Transaction transaction) at System.Transactions.TransactionInterop.GetExportCookie(Transaction transaction, Byte[] whereabouts) at System.Data.SqlClient.SqlInternalConnection.GetTransactionCookie(Transaction transaction, Byte[] whereAbouts) at System.Data.SqlClient.SqlInternalConnection.EnlistNonNull(Transaction tx) at System.Data.SqlClient.SqlInternalConnection.Enlist(Transaction tx) at System.Data.SqlClient.SqlInternalConnectionTds.Activate(Transaction transaction) at System.Data.ProviderBase.DbConnectionInternal.ActivateConnection(Transaction transaction) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at System.Data.Linq.SqlClient.SqlConnectionManager.UseConnection(IConnectionUser user) at System.Data.Linq.SqlClient.SqlProvider.get_IsSqlCe() at System.Data.Linq.SqlClient.SqlProvider.InitializeProviderMode() at System.Data.Linq.SqlClient.SqlProvider.System.Data.Linq.Provider.IProvider.Execute(Expression query) at System.Data.Linq.ChangeDirector.StandardChangeDirector.DynamicInsert(TrackedObject item) at System.Data.Linq.ChangeDirector.StandardChangeDirector.Insert(TrackedObject item) at System.Data.Linq.ChangeProcessor.SubmitChanges(ConflictMode failureMode) at System.Data.Linq.DataContext.SubmitChanges(ConflictMode failureMode) at System.Data.Linq.DataContext.SubmitChanges() at RegBook.classes.DbBase.Save() at RegBook.usercontrols.BookingProcess.confirmBookingButton_Click(Object sender, EventArgs e)

  Read the article

• EJB3 - using 2 persistence units within a transaction (Exception: Local transaction already has 1 no

  - by Sorcha

  I am trying to use 2 persistence units within the same transaction in a JEE application deployed on Glassfish. The 2 persistence units are defined in persistence.xml, as follows: <persistence-unit name="BeachWater"> <jta-data-source>jdbc/BeachWater</jta-data-source> ... <persistence-unit name="LIMS"> <jta-data-source>jdbc/BeachWaterLIMS</jta-data-source> ... These persistence units correspond to JDBC resources and connection pools which I had defined in Glassfish as follows (include one here as both are identical apart from names & database connection info): JDBC Resource: JNDI Name: jdbc/BeachWaterLIMS Pool Name: BEACHWATER_LIMS Connection Pool: Name: BEACHWATER_LIMS Datasource Classname: com.microsoft.sqlserver.jdbc.SQLServerConnectionPoolDataSource Resource Type: javax.sql.ConnectionPoolDataSource There are 3 stateless session beans, LimsServiceBean, AnalysisServiceBean and AnalysisDataTransformationServiceBean. Here are the relevant snippets from LimsServiceBean: @PersistenceContext(unitName = "LIMS") EntityManager em; ... public ArrayList<Sample> getLatestLIMSData() { Query q = em.createNamedQuery("Sample.findBySubTypeStatus"); return new ArrayList<Sample>(q.getResultList()); } From AnalysisServiceBean: @PersistenceContext(unitName = "BeachWater") EntityManager em; ... public ArrayList<AnalysisType> getAllAnalysisTypes() { Query q = em.createNamedQuery("AnalysisType.findAll"); return new ArrayList<AnalysisType>(q.getResultList()); } And from AnalysisDataTransformationServiceBean: @EJB private AnalysisService analysisService; @EJB private LimsService limsService; public void transformData() { List<AnalysisType> analysisTypes = analysisService.getAllAnalysisTypes(); ArrayList<Sample> samples = limsService.getLatestLIMSData(); This call to limsService.getLatestLIMSData() caused the following exception: [exec] Caused by: javax.ejb.TransactionRolledbackLocalException: Exception thrown from bean; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink Essentials - 2.1 (Build b60e-fcs (12/23/2008))): oracle.toplink.essentials.exceptions.DatabaseException [exec] Internal Exception: java.sql.SQLException: Error in allocating a connection. Cause: java.lang.IllegalStateException: Local transaction already has 1 non-XA Resource: cannot add more resources. Having consulted this page, http://msdn.microsoft.com/en-us/library/ms378484.aspx (among many others), I tried changing the definition of the connection pools to: Connection Pool: Name: BEACHWATER_LIMS Datasource Classname: com.microsoft.sqlserver.jdbc.SQLServerXADataSource Resource Type: javax.sql.XADataSource Ping via the Glassfish admin console succeeds, but call to analysisService.getAllAnalysisTypes() now throws an exception: Caused by: javax.ejb.TransactionRolledbackLocalException: Exception thrown from bean; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink Essentials - 2.1 (Build b60e-fcs (12/23/2008))): oracle.toplink.essentials.exceptions.DatabaseException Internal Exception: java.sql.SQLException: Error in allocating a connection. Cause: javax.transaction.SystemException Any ideas?

  Read the article

• Java Webservice java.lang.ClassCastException: org.apache.cxf.jaxws.ServiceImpl

  - by JohnC

  I am using Maven, CXF 2.2.7, JBoss 4.2.3 and JRE 1.5 I have a Webservice that I can see on the server by using the URL myURL/myService?wsdl I am trying to develop a web app to ping that webservice by calling this in my bean: MyWebService webservice = new MyWebService(); However, it dies and throws the following error, which is very vague: java.lang.ClassCastException: org.apache.cxf.jaxws.ServiceImpl 09:25:59,450 ERROR [STDERR] at javax.xml.ws.Service.<init>(Service.java:81) 09:25:59,450 ERROR [STDERR] at org.otherservice.webservice.MyWebServiceService.<init>(MyWebService.java:44) 09:25:59,450 ERROR [STDERR] at net.myservice.beans.MyBean.getMyServiceSoap(MyBean.java:109) 09:25:59,450 ERROR [STDERR] at net.myservice.beans.MyBean.ack(MyBean.java:240) 09:25:59,450 ERROR [STDERR] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) 09:25:59,450 ERROR [STDERR] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) 09:25:59,450 ERROR [STDERR] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) 09:25:59,450 ERROR [STDERR] at java.lang.reflect.Method.invoke(Method.java:585) 09:25:59,450 ERROR [STDERR] at org.apache.el.parser.AstValue.invoke(AstValue.java:131) 09:25:59,450 ERROR [STDERR] at org.apache.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:276) 09:25:59,450 ERROR [STDERR] at org.apache.jasper.el.JspMethodExpression.invoke(JspMethodExpression.java:68) 09:25:59,450 ERROR [STDERR] at javax.faces.component.MethodBindingMethodExpressionAdapter.invoke(MethodBindingMethodExpressionAdapter.java:77) 09:25:59,450 ERROR [STDERR] at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:95) 09:25:59,450 ERROR [STDERR] at javax.faces.component.UICommand.broadcast(UICommand.java:383) 09:25:59,450 ERROR [STDERR] at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:450) 09:25:59,450 ERROR [STDERR] at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:759) 09:25:59,450 ERROR [STDERR] at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:97) 09:25:59,450 ERROR [STDERR] at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:266) 09:25:59,450 ERROR [STDERR] at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:132) 09:25:59,450 ERROR [STDERR] at javax.faces.webapp.FacesServlet.service(FacesServlet.java:244) 09:25:59,450 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) 09:25:59,450 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) 09:25:59,450 ERROR [STDERR] at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:301) 09:25:59,450 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) 09:25:59,450 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) 09:25:59,450 ERROR [STDERR] at net.faces.filters.AuthorizationFilter.doFilter(AuthorizationFilter.java:84) 09:25:59,450 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) 09:25:59,450 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) 09:25:59,450 ERROR [STDERR] at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96) 09:25:59,450 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) 09:25:59,450 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) 09:25:59,450 ERROR [STDERR] at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230) 09:25:59,450 ERROR [STDERR] at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175) 09:25:59,450 ERROR [STDERR] at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182) 09:25:59,450 ERROR [STDERR] at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84) 09:25:59,450 ERROR [STDERR] at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) 09:25:59,450 ERROR [STDERR] at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) 09:25:59,450 ERROR [STDERR] at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157) 09:25:59,450 ERROR [STDERR] at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) 09:25:59,450 ERROR [STDERR] at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262) 09:25:59,450 ERROR [STDERR] at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844) 09:25:59,450 ERROR [STDERR] at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583) 09:25:59,450 ERROR [STDERR] at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446) 09:25:59,450 ERROR [STDERR] at java.lang.Thread.run(Thread.java:595) I am hoping someone has seen this exception before and can help me.

  Read the article

• 401 error when consuming a Web service with HTTP Basic authentication using CXF

  - by seanhodges

  I'm trying to consume a remote Web service that uses HTTP basic authentication, using Apache CXF, within a JUnit test. The error I am getting is: javax.xml.ws.WebServiceException: Failed to access the WSDL at: http://localhost:8080/services/MyService?wsdl. It failed with: Server returned HTTP response code: 401 for URL: http://localhost:8080/services/MyService?wsdl. at com.sun.xml.internal.ws.wsdl.parser.RuntimeWSDLParser.tryWithMex(RuntimeWSDLParser.java:151) at com.sun.xml.internal.ws.wsdl.parser.RuntimeWSDLParser.parse(RuntimeWSDLParser.java:133) at com.sun.xml.internal.ws.client.WSServiceDelegate.parseWSDL(WSServiceDelegate.java:254) at com.sun.xml.internal.ws.client.WSServiceDelegate.<init>(WSServiceDelegate.java:217) at com.sun.xml.internal.ws.client.WSServiceDelegate.<init>(WSServiceDelegate.java:165) at com.sun.xml.internal.ws.spi.ProviderImpl.createServiceDelegate(ProviderImpl.java:93) at javax.xml.ws.Service.<init>(Service.java:76) at com.wave2.marketplace.importer.impl.adportal.ws.MyServiceService.<init>(MyServiceService.java:37) at com.wave2.marketplace.importer.impl.adportal.MyWSTest.testConsumingTheWS(MyWSTest.java:22) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at junit.framework.TestCase.runTest(TestCase.java:168) at junit.framework.TestCase.runBare(TestCase.java:134) at junit.framework.TestResult$1.protect(TestResult.java:110) at junit.framework.TestResult.runProtected(TestResult.java:128) at junit.framework.TestResult.run(TestResult.java:113) at junit.framework.TestCase.run(TestCase.java:124) at junit.framework.TestSuite.runTest(TestSuite.java:232) at junit.framework.TestSuite.run(TestSuite.java:227) at org.junit.internal.runners.JUnit38ClassRunner.run(JUnit38ClassRunner.java:83) at org.eclipse.jdt.internal.junit4.runner.JUnit4TestReference.run(JUnit4TestReference.java:46) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:467) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:683) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:390) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:197) Caused by: java.io.IOException: Server returned HTTP response code: 401 for URL: http://localhost:8080/services/MyService?wsdl at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1269) at java.net.URL.openStream(URL.java:1029) at com.sun.xml.internal.ws.wsdl.parser.RuntimeWSDLParser.createReader(RuntimeWSDLParser.java:793) at com.sun.xml.internal.ws.wsdl.parser.RuntimeWSDLParser.resolveWSDL(RuntimeWSDLParser.java:251) at com.sun.xml.internal.ws.wsdl.parser.RuntimeWSDLParser.parse(RuntimeWSDLParser.java:118) ... 26 more Having read this StackOverflow post, I have attempted to add the auth credentials to my request context, as follows: @Test public void testConsumingTheWS() throws Exception { URL wsdl = new URL("http://localhost:8080/services/MyService?wsdl"); MyServiceService provider = new MyServiceService(wsdl); // <-- Error occurs here MyService service = provider.getMyService(); BindingProvider binding = (BindingProvider)service; binding.getRequestContext().put(BindingProvider.USERNAME_PROPERTY, "username"); binding.getRequestContext().put(BindingProvider.PASSWORD_PROPERTY, "password"); Ping out = service.getPing(); assertNotNull(out); } However, as my in-line comment indicates, the error is occurring before the BindingProvider code is reached, so the error remains the same. I did have a read of this article and its follow-up, but so far I've had trouble determining how to go about adding the interceptor code without the use of Spring (this is for a JUnit test). How might I go about authenticating against this Web service?

  Read the article

• NoClassDefFoundError and Netty

  - by Dmytro Leonenko

  Hi. First to say I'm n00b in Java. I can understand most concepts but in my situation I want somebody to help me. I'm using JBoss Netty to handle simple http request and using MemCachedClient check existence of client ip in memcached. import org.jboss.netty.channel.ChannelHandler; import static org.jboss.netty.handler.codec.http.HttpHeaders.*; import static org.jboss.netty.handler.codec.http.HttpHeaders.Names.*; import static org.jboss.netty.handler.codec.http.HttpResponseStatus.*; import static org.jboss.netty.handler.codec.http.HttpVersion.*; import com.danga.MemCached.*; import java.util.List; import java.util.Map; import java.util.Map.Entry; import java.util.Set; import org.jboss.netty.buffer.ChannelBuffer; import org.jboss.netty.buffer.ChannelBuffers; import org.jboss.netty.channel.ChannelFuture; import org.jboss.netty.channel.ChannelFutureListener; import org.jboss.netty.channel.ChannelHandlerContext; import org.jboss.netty.channel.ExceptionEvent; import org.jboss.netty.channel.MessageEvent; import org.jboss.netty.channel.SimpleChannelUpstreamHandler; import org.jboss.netty.handler.codec.http.Cookie; import org.jboss.netty.handler.codec.http.CookieDecoder; import org.jboss.netty.handler.codec.http.CookieEncoder; import org.jboss.netty.handler.codec.http.DefaultHttpResponse; import org.jboss.netty.handler.codec.http.HttpChunk; import org.jboss.netty.handler.codec.http.HttpChunkTrailer; import org.jboss.netty.handler.codec.http.HttpRequest; import org.jboss.netty.handler.codec.http.HttpResponse; import org.jboss.netty.handler.codec.http.HttpResponseStatus; import org.jboss.netty.handler.codec.http.QueryStringDecoder; import org.jboss.netty.util.CharsetUtil; /** * @author <a href="http://www.jboss.org/netty/">The Netty Project</a> * @author Andy Taylor ([email protected]) * @author <a href="http://gleamynode.net/">Trustin Lee</a> * * @version $Rev: 2368 $, $Date: 2010-10-18 17:19:03 +0900 (Mon, 18 Oct 2010) $ */ @SuppressWarnings({"ALL"}) public class HttpRequestHandler extends SimpleChannelUpstreamHandler { private HttpRequest request; private boolean readingChunks; /** Buffer that stores the response content */ private final StringBuilder buf = new StringBuilder(); protected MemCachedClient mcc = new MemCachedClient(); private static SockIOPool poolInstance = null; static { // server list and weights String[] servers = { "lcalhost:11211" }; //Integer[] weights = { 3, 3, 2 }; Integer[] weights = {1}; // grab an instance of our connection pool SockIOPool pool = SockIOPool.getInstance(); // set the servers and the weights pool.setServers(servers); pool.setWeights(weights); // set some basic pool settings // 5 initial, 5 min, and 250 max conns // and set the max idle time for a conn // to 6 hours pool.setInitConn(5); pool.setMinConn(5); pool.setMaxConn(250); pool.setMaxIdle(21600000); //1000 * 60 * 60 * 6 // set the sleep for the maint thread // it will wake up every x seconds and // maintain the pool size pool.setMaintSleep(30); // set some TCP settings // disable nagle // set the read timeout to 3 secs // and don't set a connect timeout pool.setNagle(false); pool.setSocketTO(3000); pool.setSocketConnectTO(0); // initialize the connection pool pool.initialize(); // lets set some compression on for the client // compress anything larger than 64k //mcc.setCompressEnable(true); //mcc.setCompressThreshold(64 * 1024); } @Override public void messageReceived(ChannelHandlerContext ctx, MessageEvent e) throws Exception { HttpRequest request = this.request = (HttpRequest) e.getMessage(); if(mcc.get(request.getHeader("X-Real-Ip")) != null) { HttpResponse response = new DefaultHttpResponse(HTTP_1_1, OK); response.setHeader("X-Accel-Redirect", request.getUri()); ctx.getChannel().write(response).addListener(ChannelFutureListener.CLOSE); } else { sendError(ctx, NOT_FOUND); } } private void writeResponse(MessageEvent e) { // Decide whether to close the connection or not. boolean keepAlive = isKeepAlive(request); // Build the response object. HttpResponse response = new DefaultHttpResponse(HTTP_1_1, OK); response.setContent(ChannelBuffers.copiedBuffer(buf.toString(), CharsetUtil.UTF_8)); response.setHeader(CONTENT_TYPE, "text/plain; charset=UTF-8"); if (keepAlive) { // Add 'Content-Length' header only for a keep-alive connection. response.setHeader(CONTENT_LENGTH, response.getContent().readableBytes()); } // Encode the cookie. String cookieString = request.getHeader(COOKIE); if (cookieString != null) { CookieDecoder cookieDecoder = new CookieDecoder(); Set<Cookie> cookies = cookieDecoder.decode(cookieString); if(!cookies.isEmpty()) { // Reset the cookies if necessary. CookieEncoder cookieEncoder = new CookieEncoder(true); for (Cookie cookie : cookies) { cookieEncoder.addCookie(cookie); } response.addHeader(SET_COOKIE, cookieEncoder.encode()); } } // Write the response. ChannelFuture future = e.getChannel().write(response); // Close the non-keep-alive connection after the write operation is done. if (!keepAlive) { future.addListener(ChannelFutureListener.CLOSE); } } @Override public void exceptionCaught(ChannelHandlerContext ctx, ExceptionEvent e) throws Exception { e.getCause().printStackTrace(); e.getChannel().close(); } private void sendError(ChannelHandlerContext ctx, HttpResponseStatus status) { HttpResponse response = new DefaultHttpResponse(HTTP_1_1, status); response.setHeader(CONTENT_TYPE, "text/plain; charset=UTF-8"); response.setContent(ChannelBuffers.copiedBuffer( "Failure: " + status.toString() + "\r\n", CharsetUtil.UTF_8)); // Close the connection as soon as the error message is sent. ctx.getChannel().write(response).addListener(ChannelFutureListener.CLOSE); } } When I try to send request like http://127.0.0.1:8090/1/2/3 I'm getting java.lang.NoClassDefFoundError: com/danga/MemCached/MemCachedClient at httpClientValidator.server.HttpRequestHandler.<clinit>(HttpRequestHandler.java:66) I believe it's not related to classpath. May be it's related to context in which mcc doesn't exist. Any help appreciated EDIT: Original code http://docs.jboss.org/netty/3.2/xref/org/jboss/netty/example/http/snoop/package-summary.html I've modified some parts to fit my needs.

  Read the article

• Which third party website thumbnailing services do you use?

  - by Ben Delarre

  I've got a requirement for showing thumbnails of arbitrary websites. I need to be able to show small thumbnails (120px by 90px), and larger thumbnails of around 480px wide. I'll need to specify the queue and invalid placeholder images and preferably have a pingback when the queued images are processed so I can respond appropriately. I'd also need a simple API I can use either directly embedded in my HTML, or from a simple web request to queue the images. I've been looking at various services ranging from low-fi services, to large scale ones - here's some examples: www.bitpixels.com Uses Google AppEngine, seems like a prototype or a toy. Free! www.websnapr.com Tried using this, made a free account and requested a thumbnail. Waited a few minutes and refreshed a couple of times, and ended up having the account banned. Free is tricky yes, but if I can't try it out successfully I'm disinclined to pay. www.shrinktheweb.com Free account seems to be very quick. Lots of documentation on the site, and even covers local caching of the images to your own server (documentation mostly in PHP). Quality of thumbnails look good, and there appear to be sufficient options for setting thumbnail placeholder images and parameters for altering how the thumbnailing is done. Also supports large 'screenshots' of URLs - very useful for me. Discovered the PRO pricing is an à la carte menu, allowing me to select just the features I want and keep the monthly cost low. Excellent stuff, have decided to use this service. www.thumbalizr.com Good coverage of thumbnail sizes and control options - even allowing specification for browser width when thumbnailing. No ping-back, but I can live without that. Supports local caching of images with PHP API, would prefer .NET, but can port it if necessary. Looks like a fairly professional service but seems fairly expensive for the number of thumbnails you get to generate. apologies for lack of proper linking - spam protection! I'm not entirely convinced by any of them, and since this will be a long term service I'd like some stability and support. I'm willing to pay for the service, but I'd want something that fulfills most if not all of my requirements for that. I should also mention that we're hosted on Windows under IIS, so local solutions involving Xvfb and the like sadly can't be used for this project. So my question is: what services do you use? How have they panned out, are you happy with them?

  Read the article

• Scala actors: receive vs react

  - by jqno

  Let me first say that I have quite a lot of Java experience, but have only recently become interested in functional languages. Recently I've started looking at Scala, which seems like a very nice language. However, I've been reading about Scala's Actor framework in Programming in Scala, and there's one thing I don't understand. In chapter 30.4 it says that using react instead of receive makes it possible to re-use threads, which is good for performance, since threads are expensive in the JVM. Does this mean that, as long as I remember to call react instead of receive, I can start as many Actors as I like? Before discovering Scala, I've been playing with Erlang, and the author of Programming Erlang boasts about spawning over 200,000 processes without breaking a sweat. I'd hate to do that with Java threads. What kind of limits am I looking at in Scala as compared to Erlang (and Java)? Also, how does this thread re-use work in Scala? Let's assume, for simplicity, that I have only one thread. Will all the actors that I start run sequentially in this thread, or will some sort of task-switching take place? For example, if I start two actors that ping-pong messages to each other, will I risk deadlock if they're started in the same thread? According to Programming in Scala, writing actors to use react is more difficult than with receive. This sounds plausible, since react doesn't return. However, the book goes on to show how you can put a react inside a loop using Actor.loop. As a result, you get loop { react { ... } } which, to me, seems pretty similar to while (true) { receive { ... } } which is used earlier in the book. Still, the book says that "in practice, programs will need at least a few receive's". So what am I missing here? What can receive do that react cannot, besides return? And why do I care? Finally, coming to the core of what I don't understand: the book keeps mentioning how using react makes it possible to discard the call stack to re-use the thread. How does that work? Why is it necessary to discard the call stack? And why can the call stack be discarded when a function terminates by throwing an exception (react), but not when it terminates by returning (receive)? I have the impression that Programming in Scala has been glossing over some of the key issues here, which is a shame, because otherwise it's a truly excellent book.

  Read the article

• HTTP caching confusion

  - by Keith

  I'm not sure whether this is a server issue, or whether I'm failing to understand how HTTP caching really works. I have an ASP MVC application running on IIS7. There's a lot of static content as part of the site including lots of CSS, Javascript and image files. For these files I want the browser to cache them for at least a day - our .css, .js, .gif and .png files rarely change. My web.config goes like this: <system.webServer> <staticContent> <clientCache cacheControlMode="UseMaxAge" cacheControlMaxAge="1.00:00:00" /> </staticContent> </system.webServer> The problem I'm getting is that the browser (tested Chrome, IE8 and FX) doesn't seem to be caching the files as I'd expect. I've got the default settings (check for newer pages automatically in IE). On first visit the content downloads as expected HTTP/1.1 200 OK Cache-Control: max-age=86400 Content-Type: image/gif Last-Modified: Fri, 07 Aug 2009 09:55:15 GMT Accept-Ranges: bytes ETag: "3efeb2294517ca1:0" Server: Microsoft-IIS/7.0 X-Powered-By: ASP.NET Date: Mon, 07 Jun 2010 14:29:16 GMT Content-Length: 918 <content> I think that the Cache-Control: max-age=86400 should tell the browser not to request the page again for a day. Ok, so now the page is reloaded and the browser requests the image again. This time it gets an empty response with these headers: HTTP/1.1 304 Not Modified Cache-Control: max-age=86400 Last-Modified: Fri, 07 Aug 2009 09:55:15 GMT Accept-Ranges: bytes ETag: "3efeb2294517ca1:0" Server: Microsoft-IIS/7.0 X-Powered-By: ASP.NET Date: Mon, 07 Jun 2010 14:30:32 GMT So it looks like the browser has sent the ETag back (as a unique id for the resource), and the server's come back with a 304 Not Modified - telling the browser that it can use the previously downloaded file. It seems to me that would be correct for many caching situations, but here I don't want the extra round trip. I don't care if the image gets out of date when the file on the server changes. There are a lot of these files (even with sprite-maps and the like) and many of our clients have very slow networks. Each round trip to ping for that 304 status is taking about a 10th to a 5th of a second. Many also have IE6 which only has 2 HTTP connections at a time. The net result is that our application appears to be very slow for these clients with every page taking an extra couple of seconds to check that the static content hasn't changed. What response header am I missing that would cause the browser to aggressively cache the files? How would I set this in a .Net web.config for IIS7? Am I misunderstanding how HTTP caching works in the first place?

  Read the article

• Safari Frames Invisible Scrollbar

  - by mobiuschic42

  I'm working on a website that uses not just frames, but frames within frames (ew, I know, but I don't get to choose). It actually works OK most of the time, but I'm running into a problem with some of the frames within frames in Safari (only). Some of the two-deep frames render in Safari with a small space on the right-hand side of the frame - I think it's just the ones with scroll set to "no", but fiddling with the scroll settings hasn't fixed it yet. It basically looks like there should be a scroll bar there, but there isn't. I've been working on this awhile and tried a lot of things: changing the heights of the rows, changing the scroll settings, adding a colls='100%' tag, changing the heights of the contents of the frames, as well as checking to make sure widths are set to 100% throughout. Nothing's fixed it so far. Does any one know what's happening here? Here's the basic gist of the code and some screenshots - please forgive the lack of proper quotes; it still renders and fixing them all in this codebase would be a losing battle: <html> <frameset id=fset frameborder=0 border=0 framespacing=0 onbeforeunload="onAppClosing()" onload="onAppInit()" rows="125px,*,0"> <frame src="navFrame.html" name=ControlPanel marginwidth=0 marginheight=0 frameborder=0 scrolling=no noresize> <frame src="contentFrame.html" name=C marginwidth=0 marginheight=0 frameborder=0 scrolling=no> <frame src="invisiFrame.html" name=PING marginwidth=0 marginheight=0 frameborder=0 noresize> <noframes><body>Tough luck.</center></body></noframes> </frameset></html> Inside that second frame (named "C" and with src of "contentFrame") is this: <HTML> <HEAD><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=utf-8"></head> <frameset rows="48px,*,28px" border=0 frameborder=0 framespacing=0> <frame src="pageTitle.html" name=Title marginwidth=0 marginheight=0 noresize scrolling=no frameborder=0> <frame src="content.html" name=ScreenBody marginwidth=0 marginheight=0 frameborder=0> <frame src="submitBar.html" name=ContextPanel marginwidth=0 marginheight=0 frameborder=0 scrolling=no noresize> </FRAMESET> </HTML> The frames that are troublesome are the first frame (named "Title" with src of "pageTitle.html") and the last frame (named "ContextPanel" with src of "submitBar.html") both have their widths set to 100% and heights are either 100%, not set, or a value less than or equal to their row height. Here is an image of the problem:

  Read the article

• Primary language - C++/Qt, C#, Java?

  - by Airjoe

  I'm looking for some input, but let me start with a bit of background (for tl;dr skip to end). I'm an IT major with a concentration in networking. While I'm not a CS major nor do I want to program as a vocation, I do consider myself a programmer and do pretty well with the concepts involved. I've been programming since about 6th grade, started out with a proprietary game creation language that made my transition into C++ at college pretty easy. I like to make programs for myself and friends, and have been paid to program for local businesses. A bit about that- I wrote some programs for a couple local businesses in my senior year in high school. I wrote management systems for local shops (inventory, phone/pos orders, timeclock, customer info, and more stuff I can't remember). It definitely turned out to be over my head, as I had never had any formal programming education. It was a great learning experience, but damn was it crappy code. Oh yeah, by the way, it was all vb6. So, I've used vb6 pretty extensively, I've used c++ in my classes (intro to programming up to algorithms), used Java a little bit in another class (had to write a ping client program, pretty easy) and used Java for some simple Project Euler problems to help learn syntax and such when writing the program for the class. I've also used C# a bit for my own simple personal projects (simple programs, one which would just generate an HTTP request on a list of websites and notify if one responded unexpectedly or not at all, and another which just held a list of things to do and periodically reminded me to do them), things I would've written in vb6 a year or two ago. I've just started using Qt C++ for some undergrad research I'm working on. Now I've had some formal education, I [think I] understand organization in programming a lot better (I didn't even use classes in my vb6 programs where I really should have), how it's important to structure code, split into functions where appropriate, document properly, efficiency both in memory and speed, dynamic and modular programming etc. I was looking for some input on which language to pick up as my "primary". As I'm not a "real programmer", it will be mostly hobby projects, but will include some 'real' projects I'm sure. From my perspective: QtC++ and Java are cross platform, which is cool. Java and C# run in a virtual machine, but I'm not sure if that's a big deal (something extra to distribute, possibly a bit slower? I think Qt would require additional distributables too, right?). I don't really know too much more than this, so I appreciate any help, thanks! TL;DR Am an avocational programmer looking for a language, want quick and straight forward development, liked vb6, will be working with database driven GUI apps- should I go with QtC++, Java, C#, or perhaps something else?

  Read the article

• Primary language - QtC++, C#, Java?

  - by Airjoe

  I'm looking for some input, but let me start with a bit of background (for tl;dr skip to end). I'm an IT major with a concentration in networking. While I'm not a CS major nor do I want to program as a vocation, I do consider myself a programmer and do pretty well with the concepts involved. I've been programming since about 6th grade, started out with a proprietary game creation language that made my transition into C++ at college pretty easy. I like to make programs for myself and friends, and have been paid to program for local businesses. A bit about that- I wrote some programs for a couple local businesses in my senior year in high school. I wrote management systems for local shops (inventory, phone/pos orders, timeclock, customer info, and more stuff I can't remember). It definitely turned out to be over my head, as I had never had any formal programming education. It was a great learning experience, but damn was it crappy code. Oh yeah, by the way, it was all vb6. So, I've used vb6 pretty extensively, I've used c++ in my classes (intro to programming up to algorithms), used Java a little bit in another class (had to write a ping client program, pretty easy) and used Java for some simple Project Euler problems to help learn syntax and such when writing the program for the class. I've also used C# a bit for my own simple personal projects (simple programs, one which would just generate an HTTP request on a list of websites and notify if one responded unexpectedly or not at all, and another which just held a list of things to do and periodically reminded me to do them), things I would've written in vb6 a year or two ago. I've just started using Qt C++ for some undergrad research I'm working on. Now I've had some formal education, I [think I] understand organization in programming a lot better (I didn't even use classes in my vb6 programs where I really should have), how it's important to structure code, split into functions where appropriate, document properly, efficiency both in memory and speed, dynamic and modular programming etc. I was looking for some input on which language to pick up as my "primary". As I'm not a "real programmer", it will be mostly hobby projects, but will include some 'real' projects I'm sure. From my perspective: QtC++ and Java are cross platform, which is cool. Java and C# run in a virtual machine, but I'm not sure if that's a big deal (something extra to distribute, possibly a bit slower? I think Qt would require additional distributables too, right?). I don't really know too much more than this, so I appreciate any help, thanks! TL;DR Am an avocational programmer looking for a language, want quick and straight forward development, liked vb6, will be working with database driven GUI apps- should I go with QtC++, Java, C#, or perhaps something else?

  Read the article

• A script that writes errors and should create a event-error

  - by helmich

  this if it works should check the internet connection if there is a connection it does nothing. if there isn't a connection it should write a error in a txtfile if that happend 5 times it should create a error but it doesn't I will show you the whole code that i have now and the piece of code that i want in a loop. I can't get it in the way i want. I want it to creat 1 Event-error after 5 times writing to the file. this is the whole code i will put the code i want in a loop under it strDirectory = "Z:\text2" strFile = "\foutmelding.txt" strText = "De connectie is verbroken" strWebsite = "www.helmichbeens.com" If PingSite(strWebsite) Then WScript.Quit 'Website is pingable - no further action required Set objFSO = CreateObject("Scripting.FileSystemObject") RecordSingleEvent Dim fout For fout = 1 To 5 : Do If fout = 5 Then Exit Do Set WshShell = WScript.CreateObject("WScript.Shell") Call WshShell.LogEvent(1, "Test Event") Loop While False : next '------------------------------------ 'Record a single event in a text file '------------------------------------ Sub RecordSingleEvent If Not objFSO.FolderExists(strDirectory) Then objFSO.CreateFolder(strDirectory) Set objTextFile = objFSO.OpenTextFile(strDirectory & strFile, 8, True) objTextFile.WriteLine(Now & strText) objTextFile.Close End sub '---------------- 'Ping my web site '---------------- Function PingSite( myWebsite ) Set objHTTP = CreateObject( "WinHttp.WinHttpRequest.5.1" ) objHTTP.Open "GET", "http://" & myWebsite & "/", False objHTTP.SetRequestHeader "User-Agent", "Mozilla/4.0 (compatible; MyApp 1.0; Windows NT 5.1)" On Error Resume Next objHTTP.Send PingSite = (objHTTP.Status = 200) On Error Goto 0 End Function '----------------------------------------------- 'Counts the number of lines inside the text file '----------------------------------------------- Function EventCount(fout) strData = objFSO.OpenTextFile(strDirectory & strFile,ForReading).ReadAll arrLines = Split(strData,vbCrLf) EventCount = UBound(arrLines) End Function This is the whole code, and it doesnt work correctly becaus it creats a event-log rightaway and it should do that after the script has written 5 times to the textfile here is the code that writes to a textfile Sub RecordSingleEvent If Not objFSO.FolderExists(strDirectory) Then objFSO.CreateFolder(strDirectory) Set objTextFile = objFSO.OpenTextFile(strDirectory & strFile, 8, True) objTextFile.WriteLine(Now & strText) objTextFile.Close End sub and here is the code but this part doesnt not work or atleast i think it is this part Dim fout For fout = 1 To 5 : Do If fout = 5 Then Exit Do Set WshShell = WScript.CreateObject("WScript.Shell") Call WshShell.LogEvent(1, "Test Event") Loop While False : next Function EventCount(fout) strData = objFSO.OpenTextFile(strDirectory & strFile,ForReading).ReadAll arrLines = Split(strData,vbCrLf) EventCount = UBound(arrLines) End Function this is the not working part and I don't know what to do anymore so can you please take a look at it tank you very much. btw: this code can be very usefull for a network administrator

  Read the article

• OpenVPN: Connection established but can’t connect to server

  - by Maik

  I am trying to set up OpenVPN to allow me to connect a number of laptops to my network in a way that allows the laptops to connect to specific computers via HTTP (to e.g. a server management page) and windows shares (to access files) In the test environment my laptops live in a network with a 192.168.1.X address range. The host-network has a 10.66.77.X address range The server hosting the OpenVPN server has address 10.77.10.20. I need to access some application server web pages on this machine, accessible on various ports The server with the windows shares as well as some other web based pages I need to access is on address 10.66.77.20 The config files for server and laptop are attached below. The laptop establishes the VPN connection without problems, but I cannot access any of the machines, even a simple ping fails. Maybe a routing problem? The routing table for the laptop is shown below as well - every idea is appreciated! Thanks! Maik Server config file port 1194 dev tun tls-server ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/projects.crt key /etc/openvpn/keys/projects.key dh /etc/openvpn/keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "route 10.66.77.0 255.255.255.0" keepalive 10 60 inactive 600 route 10.8.0.1 255.255.255.0 user openvpn group openvpn persist-tun persist-key verb 4 client config file dev tun proto udp remote SERVERADDR 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert accountingLaptop.crt key accountingLaptop.key ns-cert-type server comp-lzo verb 3 Resulting routing table on client laptop C:\Documents and Settings\User>route print =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 23 5a 9b 64 9b ...... Atheros AR8132 PCI-E Fast Ethernet Controller - Packet Scheduler Miniport 0x3 ...00 24 2c 35 c9 6b ...... Dell Wireless 1395 WLAN Mini-Card - Packet Sched uler Miniport 0x4 ...00 ff 5e 03 43 9b ...... TAP-Win32 Adapter V9 - Packet Scheduler Miniport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.129 25 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 1 10.8.0.4 255.255.255.252 10.8.0.6 10.8.0.6 30 10.8.0.6 255.255.255.255 127.0.0.1 127.0.0.1 30 10.66.77.0 255.255.255.0 10.8.0.5 10.8.0.6 1 10.255.255.255 255.255.255.255 10.8.0.6 10.8.0.6 30 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.1.0 255.255.255.0 192.168.1.129 192.168.1.129 25 192.168.1.129 255.255.255.255 127.0.0.1 127.0.0.1 25 192.168.1.255 255.255.255.255 192.168.1.129 192.168.1.129 25 224.0.0.0 240.0.0.0 10.8.0.6 10.8.0.6 30 224.0.0.0 240.0.0.0 192.168.1.129 192.168.1.129 25 255.255.255.255 255.255.255.255 10.8.0.6 2 1 255.255.255.255 255.255.255.255 10.8.0.6 10.8.0.6 1 255.255.255.255 255.255.255.255 192.168.1.129 192.168.1.129 1 Default Gateway: 192.168.1.1 =========================================================================== Persistent Routes: None

  Read the article

• Trouble with dns and debian update

  - by Sean

  I tried to update my debian dreamplug server with the command running as root apt-get update and recieved these errors. Err http://security.debian.org lenny/updates Release.gpg Could not resolve 'security.debian.org' Err htdtp://security.debian.org lenny/updates/main Translation-en_US Could not resolve 'security.debian.org' Err htdtp://security.debian.org lenny/updates/contrib Translation-en_US Could not resolve 'security.debian.org' Err htdtp://security.debian.org lenny/updates/non-free Translation-en_US Could not resolve 'security.debian.org' Err httdp://www.backports.org lenny-backports Releasegpg Could not resolve 'www.backports.org' Err httdp://www.backports.org lenny-backports/main Translation-en_US Could not resolve 'www.backports.org' Err httdp://www.backports.org lenny-backports/contrib Translation-en_US Could not resolve 'www.backports.org' Err httdp://www.backports.org lenny-backports/non-free Translation-en_US Could not resolve 'www.backports.org' Err httdp://ftp.us.debian.org lenny Release.gpg Could not resolve 'ftp.us.debian.org' Err httdp://ftp.us.debian.org lenny/main Translation-en_US Could not resolve 'ftp.us.debian.org' Err httdp://ftp.us.debian.org lenny/contrib Translation-en_US Could not resolve 'ftp.us.debian.org' Err httdp://ftp.us.debian.org lenny/non-free Translation-en_US Could not resolve 'ftp.us.debian.org' Err httdp://http.us.debian.org stable Release.gpg Could not resolve 'http.us.debian.org' Err htdtp://http.us.debian.org stable/main Translation-en_US Could not resolve 'http.us.debian.org' Err httdp://http.us.debian.org stable/contrib Translation-en_US Could not resolve 'http.us.debian.org' Err htdtp://http.us.debian.org stable/non-free Translation-en_US Could not resolve 'http.us.debian.org' Reading package lists... Done W: Failed to fetch ttp://ftp.us.debian.org/debian/dists/lenny/Release.gpg Could not resolve 'ftp.us.debian.org' W: Failed to fetch ttp://ftp.us.debian.org/debian/dists/lenny/main/i18n/Translation-en_US.gz Could not resolve 'ftp.us.debian.org' W: Failed to fetch ttp://ftp.us.debian.org/debian/dists/lenny/contrib/i18n/Translation-en_US.gz Could not resolve 'ftp.us.debian.org' W: Failed to fetch ttp://ftp.us.debian.org/debian/dists/lenny/non-free/i18n/Translation-en_US.gz Could not resolve 'ftp.us.debian.org' W: Failed to fetch ttp://http.us.debian.org/debian/dists/stable/Release.gpg Could not resolve 'http.us.debian.org' W: Failed to fetch ttp://http.us.debian.org/debian/dists/stable/main/i18n/Translation-en_US.gz Could not resolve 'http.us.debian.org' W: Failed to fetch ttp://http.us.debian.org/debian/dists/stable/contrib/i18n/Translation-en_US.gz Could not resolve 'http.us.debian.org' W: Failed to fetch ttp://http.us.debian.org/debian/dists/stable/non-free/i18n/Translation-en_US.gz Could not resolve 'http.us.debian.org' W: Failed to fetch ttp://security.debian.org/dists/lenny/updates/Release.gpg Could not resolve 'security.debian.org' W: Failed to fetch ttp://security.debian.org/dists/lenny/updates/main/i18n/Translation-en_US.gz Could not resolve 'security.debian.org' W: Failed to fetch ttp://security.debian.org/dists/lenny/updates/contrib/i18n/Translation-en_US.gz Could not resolve 'security.debian.org' W: Failed to fetch ttp://security.debian.org/dists/lenny/updates/non-free/i18n/Translation-en_US.gz Could not resolve 'security.debian.org' W: Failed to fetch ttp://www.backports.org/debian/dists/lenny-backports/Release.gpg Could not resolve 'www.backports.org' W: Failed to fetch ttp://www.backports.org/debian/dists/lenny-backports/main/i18n/Translation-en_US.gz Could not resolve 'www.backports.org' W: Failed to fetch ttp://www.backports.org/debian/dists/lenny-backports/contrib/i18n/Translation-en_US.gz Could not resolve 'www.backports.org' W: Failed to fetch ttp://www.backports.org/debian/dists/lenny-backports/non-free/i18n/Translation-en_US.gz Could not resolve 'www.backports.org' W: Some index files failed to download, they have been ignored, or old ones used instead. W: You may want to run apt-get update to correct these problems I am able to ping ip addresses but not namespaces. Can't seem to figure out the problem. My /etc/resolv.conf file contains nameserver 192.168.1.2 which is my router.

  Read the article

• Debian, 6rd tunnel, and connection troubles

  - by Chris B

  Long story short I am having issues with IPv6 using a 6rd tunnel with my ISP, charter business. They offer a 6rd tunnel that I think I have properly set up, but the server doesn’t reply to every ipv6 request. When the server has the network interfaces idle with no traffic for about 10 minutes, then IPv6 stops accepting inbound connections. to re-allow it, I must go into the server, and make it do a outbound ipv6 connection (normally a ping) to start it back up. Whats weird though i that if I run iptraf when its not working, it still shows a inbound ipv6 packet… the server is just not replying, and I can’t figure out why. Also, if I try to access my server over IPv6 from a house about 1 mile away on the same ISP, it is never able to connect. it always times out, but again the iptraf shows a ipv6 inbound packet. Again, it just does not reply. To test if my server is accessible through IPv6 I always have to use my vzw 4g phone (they use IPv6) or ipv6proxy dot net. Here is all of the configuration information my ISP gives on there tunnel server: 6rd Prefix = 2602:100::/32 Border Relay Address = 68.114.165.1 6rd prefix length = 32 IPv4 mask length = 0 Here is my /etc/network/interfaces for ipv6 (used x's to block real addresses) auto charterv6 iface charterv6 inet6 v4tunnel address 2602:100:189f:xxxx::1 netmask 32 ttl 64 gateway ::68.114.165.1 endpoint 68.114.165.1 local 24.159.218.xxx up ip link set mtu 1280 dev charterv6 here is my iptables config filter :INPUT DROP [0:0] :fail2ban-ssh – [0:0] :OUTPUT ACCEPT [0:0] :FORWARD DROP [0:0] :hold – [0:0] -A INPUT -p tcp -m tcp —dport 22 -j fail2ban-ssh -A INPUT -m state —state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m multiport -j ACCEPT —dports 80,443,25,465,110,995,143,993,587,465,22 -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m tcp —dport 10000 -j ACCEPT -A INPUT -p tcp -m tcp —dport 5900:5910 -j ACCEPT -A fail2ban-ssh -j RETURN -A INPUT -p icmp -j ACCEPT COMMIT and last here is my ip6tables firewall config filter :INPUT DROP [1653:339023] :FORWARD DROP [0:0] :OUTPUT ACCEPT [60141:13757903] :hold – [0:0] -A INPUT -m state —state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m multiport —dports 80,443,25,465,110,995,143,993,587,465,22 -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m tcp —dport 10000 -j ACCEPT -A INPUT -p tcp -m tcp —dport 5900:5910 -j ACCEPT -A INPUT -p ipv6-icmp -j ACCEPT COMMIT So Summary: 1.iptraf always shows IPv6 traffic, so its always making it to the server 2.server stops replying on ipv6 after no traffic for awhile (10 minutesish) until a outbound connection is made, then the process repeats. 3.server is NEVER accessable vi same ISP (yet iptraf still shows ipv6 request) Notes: When I try to access it from the same ISP from across town, even with iptables and ip6tables allowing ALL inbound traffic, this is what iptraf shows. IPv6 (92 bytes) from 97.92.18.xxx to 24.159.218.xxx on eth0 ICMP dest unrch (port) (120 bytes) from 24.159.218.xxx to 97.92.18.xxx on eth1 its strange, like its trying to forward to LAN? (eth1 is LAN, eth0 is WAN) even with the IPv6 address being set in the hosts file to the servers domain name. With iptables set up normally with the above configurations it only says this: IPv6 (100 bytes) from 97.92.18.xxx to 24.159.218.xxx on eth0 Im REALLY stuck on this, and any help would be GREATLY appreciated.

  Read the article

• Linux pptp client stops working after several hours

  - by Aron Rotteveel

  Here's the situation: Setup: 1 Windows Server 2008 machine acting as a Domain Controller and RRAS server 1 CentOS machine in a datacentre located elsewhere PPTP client running on CentOS machine, connected to the DC via When I connect to the DC, everything is working fine. I have set up a static IP for the dialup connection in my RRAS server so that the CentOS machine is automatically assigned the IP 192.168.1.240. Inside the VPN, it is not possible to access this machine on the local IP-address. Perfect. However, after several hours, it simply seems to stop working (IE: I cannot ping to or from this machine on the local network). The strange thing is, however: The DC shows the VPN client as still being connected The CentOS machine shows the network interface as being up There are no entries in my /var/log/messages that indicate a problem Output from ifconfig: ppp0 Link encap:Point-to-Point Protocol inet addr:192.168.1.240 P-t-P:192.168.1.160 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1396 Metric:1 RX packets:43 errors:0 dropped:0 overruns:0 frame:0 TX packets:58 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:4511 (4.4 KiB) TX bytes:15071 (14.7 KiB) Output from route -n: 192.168.1.160 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 ppp0 I have the following in my ip-up.local: route add -net 192.168.1.0 netmask 255.255.255.0 dev ppp0 The situation can be easily fixed by issueing a killall pppd and re-connecting. However, I obviously do not want to do this every X-hours or so. I have tried running pppd with both the debug as the kdebug flag but cannot find the cause of this problem. Currently, my ppp0 network interface seems to be running and the last log lines mentioning it are: Feb 19 14:10:40 graviton pppd[10934]: local IP address 192.168.1.240 Feb 19 14:10:40 graviton pppd[10934]: remote IP address 192.168.1.160 Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up started (pid 10952) Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up finished (pid 10952), status = 0x0 Feb 19 14:11:27 graviton pptp[10935]: anon log[decaps_gre:pptp_gre.c:414]: buffering packet 190 (expecting 189, lost or reordered) Feb 19 14:11:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:11:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:12:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:13:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:14:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:15:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:16:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:679]: no more Echo Reply/Request packets will be reported. I have enabled the persist option. The network interface is still running, but it is still impossible to send data through the VPN. Any help is appreciated.

  Read the article

• Huawei b153 limit of devices

  - by bdecaf

  I set up my home network all through this 3G wifi router. Problem is it only allows 5 devices to connect. That's not much especially if a wifi printer and gaming consoles keep hogging these slots. On the other hand I don't see the point on blocking these devices. They are (should) not doing anything online just intern in my network. The documentation I can find is surpirisingly unhelpful and focuses how to plug the device in a power socket. So what would be my options. Notes: I have already been able to get a shell on the device using ssh. It's running some Busybox. But I fail to find the how and where this limit is enforced/created. Notes 2: Specifically my device is a 3WebCube - unfortunately not specifically marked with the Huawei Model number. Successes so far After enabling ssh in the options I can login: ssh -T [email protected] [email protected]'s password: ------------------------------- -----Welcome to ATP Cli------ ------------------------------- unfortunately because of this -T - the tab key does not work for autocomplete and all inputted commands will be echoed. Also no history with arrow keys. ATP interface this custom interface is not very useful: ATP>help help Welcome to ATP command line tool. If any question, please input "?" at the end of command. ATP>? ? cls debug help save ? exit ATP>save? save? Command failed. ATP>save ? save ? ATP>debug ? debug ? display set trace ? Shell BUT undocumented - I somehow found on a auto translated chinese website - all you need to do is input sh ATP>sh sh BusyBox vv1.9.1 (2011-03-27 11:59:11 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. # builtin commands # help Built-in commands: ------------------- . : alias bg break cd chdir command continue eval exec exit export false fg getopts hash help jobs kill let local pwd read readonly return set shift source times trap true type ulimit umask unalias unset wait shows standard unix structure: # ls / var tmp proc linuxrc init etc bin usr sbin mnt lib html dev in /bin # ls /bin zebra strace ppps ln echo cat wscd startbsp pppc klog ebtables busybox wlancmd sshd ping kill dns brctl web sntp netstat iwpriv dhcps auth usbdiagd sms mount iwcontrol dhcpc atserver upnp sleep mknod iptables date atcmd upg siproxd mkdir ipcheck cp at umount sh mini_upnpd ip console ash test_at rm mic igmpproxy cms telnetd ripd ls ethcmd cmgr swapdev ps log equipcmd cli in /sbin # ls /sbin vconfig reboot insmod ifconfig arp route poweroff init halt using tftp after installing tftp on my desktop I was able to send files with tftp -s -l curcfg.xml 192.168.1.103 and to download onto the huawei with tftp -g -r curcfg.xml 192.168.1.103 I think I'll need that - because I don't see any editor installed. readout stuff (still playing around where I would get interesting info) For confirmation of hardware: # cat /var/log/modem_hardware_name ^HWVER:"WL1B153M001"# # cat /var/log/modem_software_name 1096.11.03.02.107 # cat /var/log/product_name B153

  Read the article

• Useful Command-line Commands on Windows

  - by Sung Meister

  The aim for this Wiki is to promote using a command to open up commonly used applications without having to go through many mouse clicks - thus saving time on monitoring and troubleshooting Windows machines. Answer entries need to specify Application name Commands Screenshot (Optional) Shortcut to commands && - Command Chaining %SYSTEMROOT%\System32\rcimlby.exe -LaunchRA - Remote Assistance (Windows XP) appwiz.cpl - Programs and Features (Formerly Known as "Add or Remove Programs") appwiz.cpl @,2 - Turn Windows Features On and Off (Add/Remove Windows Components pane) arp - Displays and modifies the IP-to-Physical address translation tables used by address resolution protocol (ARP) at - Schedule tasks either locally or remotely without using Scheduled Tasks bootsect.exe - Updates the master boot code for hard disk partitions to switch between BOOTMGR and NTLDR cacls - Change Access Control List (ACL) permissions on a directory, its subcontents, or files calc - Calculator chkdsk - Check/Fix the disk surface for physical errors or bad sectors cipher - Displays or alters the encryption of directories [files] on NTFS partitions cleanmgr.exe - Disk Cleanup clip - Redirects output of command line tools to the Windows clipboard cls - clear the command line screen cmd /k - Run command with command extensions enabled color - Sets the default console foreground and background colors in console command.com - Default Operating System Shell compmgmt.msc - Computer Management control.exe /name Microsoft.NetworkAndSharingCenter - Network and Sharing Center control keyboard - Keyboard Properties control mouse(or main.cpl) - Mouse Properties control sysdm.cpl,@0,3 - Advanced Tab of the System Properties dialog control userpasswords2 - Opens the classic User Accounts dialog desk.cpl - opens the display properties devmgmt.msc - Device Manager diskmgmt.msc - Disk Management diskpart - Disk management from the command line dsa.msc - Opens active directory users and computers dsquery - Finds any objects in the directory according to criteria dxdiag - DirectX Diagnostic Tool eventvwr - Windows Event Log (Event Viewer) explorer . - Open explorer with the current folder selected. explorer /e, . - Open explorer, with folder tree, with current folder selected. F7 - View command history find - Searches for a text string in a file or files findstr - Find a string in a file firewall.cpl - Opens the Windows Firewall settings fsmgmt.msc - Shared Folders fsutil - Perform tasks related to FAT and NTFS file systems ftp - Transfers files to and from a computer running an FTP server service getmac - Shows the mac address(es) of your network adapter(s) gpedit.msc - Group Policy Editor gpresult - Displays the Resultant Set of Policy (RSoP) information for a target user and computer httpcfg.exe - HTTP Configuration Utility iisreset - To restart IIS InetMgr.exe - Internet Information Services (IIS) Manager 7 InetMgr6.exe - Internet Information Services (IIS) Manager 6 intl.cpl - Regional and Language Options ipconfig - Internet protocol configuration lusrmgr.msc - Local Users and Groups Administrator msconfig - System Configuration notepad - Notepad? ;) mmsys.cpl - Sound/Recording/Playback properties mode - Configure system devices more - Displays one screen of output at a time mrt - Microsoft Windows Malicious Software Removal Tool mstsc.exe - Remote Desktop Connection nbstat - displays protocol statistics and current TCP/IP connections using NBT ncpa.cpl - Network Connections netsh - Display or modify the network configuration of a computer that is currently running netstat - Network Statistics net statistics - Check computer up time net stop - Stops a running service. net use - Connects a computer to or disconnects a computer from a shared resource, or displays information about computer connections odbcad32.exe - ODBC Data Source Administrator pathping - A traceroute that collects detailed packet loss stats perfmon - Opens Reliability and Performance Monitor ping - Determine whether a remote computer is accessible over the network powercfg.cpl - Power management control panel applet quser - Display information about user sessions on a terminal server qwinsta - See disconnected remote desktop sessions reg.exe - Console Registry Tool for Windows regedit - Registry Editor rasdial - Connects to a VPN or a dialup network robocopy - Backup/Restore/Copy large amounts of files reliably rsop.msc - Resultant Set of Policy (shows the combined effect of all group policies active on the current system/login) runas - Run specific tools and programs with different permissions than the user's current logon provides sc - Manage anything you want to do with services. schtasks - Enables an administrator to create, delete, query, change, run and end scheduled tasks on a local or remote system. secpol.msc - Local Security Settings services.msc - Services control panel set - Displays, sets, or removes cmd.exe environment variables. set DIRCMD - Preset dir parameter in cmd.exe start - Starts a separate window to run a specified program or command start. - opens the current directory in the Windows Explorer. shutdown.exe - Shutdown or Reboot a local/remote machine subst.exe - Associates a path with a drive letter, including local drives systeminfo -Displays a comprehensive information about the system taskkill - terminate tasks by process id (PID) or image name tasklist.exe - List Processes on local or a remote machine taskmgr.exe - Task Manager telephon.cpl - Telephone and Modem properties timedate.cpl - Date and Time title - Change the title of the CMD window you have open tracert - Trace route wmic - Windows Management Instrumentation Command-line winver.exe - Find Windows Version wscui.cpl - Windows Security Center wuauclt.exe - Windows Update AutoUpdate Client

  Read the article

• eth0 and eth1 both assigned same IP on boot

  - by Banjer

  I have a physical SLES 11 SP2 server on a Sun Fire x4140 that is giving me problems with networking upon reboot. The NICs are onboard. The networking appears successful during boot, but network services such as nfs fail hard. This is because eth0 and eth1 are both receiving the same configuration and are both ifup-ed. Once everything times out and I'm at the console, ifconfig shows that eth0 and eth1 are UP and running with the same IP. Attempting to ping anything in that subnet fails. Restarting the network service fixes the issue. eth0 is the correct NIC that should be configured as primary, per the MAC address. Question: Whats causing eth1 to be brought up with the same config as eth0?? I do not have a config script set up for eth1: banjer@harp:~> ls -la /etc/sysconfig/network/ total 104 drwxr-xr-x 6 root root 4096 Jun 11 12:21 . drwxr-xr-x 6 root root 4096 Apr 10 09:46 .. -rw-r--r-- 1 root root 13916 Apr 10 09:32 config -rw-r--r-- 1 root root 9952 Apr 10 09:36 dhcp -rw------- 1 root root 180 Jun 11 12:21 ifcfg-eth0 -rw------- 1 root root 180 Jun 11 12:21 ifcfg-eth3 -rw------- 1 root root 172 Feb 1 08:32 ifcfg-lo -rw-r--r-- 1 root root 29333 Feb 1 08:32 ifcfg.template drwxr-xr-x 2 root root 4096 Apr 10 09:32 if-down.d -rw-r--r-- 1 root root 239 Feb 1 08:32 ifroute-lo drwxr-xr-x 2 root root 4096 Apr 10 09:33 if-up.d drwx------ 2 root root 4096 May 5 2010 providers -rw-r--r-- 1 root root 25 Nov 16 2010 routes drwxr-xr-x 2 root root 4096 Apr 10 09:36 scripts On a side note, eth3 is also configured with an IP in a different subnet, but this has not posed any problems. FYI the kernel module being used is forcedeth. banjer@harp:~> sudo cat /etc/sysconfig/network/ifcfg-eth0 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='172.21.64.25/20' MTU='' NAME='MCP55 Ethernet' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ONBOOT="yes" Here's eth3 in case you need to see it: banjer@harp:~> sudo cat /etc/sysconfig/network/ifcfg-eth3 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='172.11.200.4/24' MTU='' NAME='MCP55 Ethernet' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ONBOOT="yes" Perhaps is something related to udev? 70-persistent-net-rules looks OK to me, but I may not understand it completely. banjer@harp:~> cat /etc/udev/rules.d/70-persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key. # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4a", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4b", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4d", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3" # PCI device 0x1077:0x3032 (qla3xxx) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:c1:dd:0e:34:6c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth4" Any other thoughts on what would cause this?

  Read the article

• Initial Cisco ASA 5510 Config

  - by Brendan ODonnell

  Fair warning, I'm a but of a noob so please bear with me. I'm trying to set up a new ASA 5510. I have a pretty simple set up with one /24 on the inside NATed to a DHCP address on the outside. Everything on the inside works and I can ping the outside interface from external devices. No matter what I do I can't get anything internal to route across the border to the outside and back. To try and eliminate ACL issues as a possibility I added permit any any rules to the incoming access lists on the inside and outside interfaces. I'd appreciate any help I can get. Here's the sh run. : Saved : ASA Version 8.4(3) ! hostname gateway domain-name xxx.local enable password xxx encrypted passwd xxx encrypted names ! interface Ethernet0/0 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/1 nameif inside security-level 100 ip address 10.x.x.x 255.255.255.0 ! interface Ethernet0/2 shutdown no nameif no security-level no ip address ! interface Ethernet0/3 shutdown no nameif no security-level no ip address ! interface Management0/0 nameif management security-level 100 ip address 192.168.1.1 255.255.255.0 management-only ! ftp mode passive dns domain-lookup inside dns server-group DefaultDNS name-server 10.x.x.x domain-name xxx.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-network subnet 10.x.x.x 255.255.255.0 object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list outside_access_in extended permit ip any any access-list inside_access_in extended permit ip any any pager lines 24 logging enable logging buffered informational logging asdm informational mtu management 1500 mtu inside 1500 mtu outside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any inside icmp permit any outside no asdm history enable arp timeout 14400 ! object network inside-network nat (any,outside) dynamic interface access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL aaa authentication ssh console LOCAL aaa authentication http console LOCAL http server enable http 192.168.1.0 255.255.255.0 management http 10.x.x.x 255.255.255.0 inside http authentication-certificate management http authentication-certificate inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart telnet timeout 5 ssh 192.168.1.0 255.255.255.0 management ssh 10.x.x.x 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 dhcp-client client-id interface outside dhcpd address 192.168.1.2-192.168.1.254 management dhcpd enable management ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn username xxx password xxx encrypted ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options inspect icmp ! service-policy global_policy global prompt hostname context no call-home reporting anonymous Cryptochecksum:fe19874e18fe7107948eb0ada6240bc2 : end no asdm history enable

  Read the article

• Windows 7 .NET 3.5.1 - 2.0 Slightly Corrupted, How to Repair?

  - by Quinxy von Besiex

  My Windows 7 included .NET installation (3.5 to 2.0) appears very slightly and particularly corrupted and I am trying to fix it without reinstalling Windows or trying to revert to backups. Everything was working and then my hard drive started corrupting a few files and checkdisk found bad clusters so I imaged the drive to a new one. As soon as I booted on the new drive everything worked except programs which call the System.Net.NetworkInformation methods within .NET 3.5 to 2.0 (like Ping() and IsNetworkAvailable()), which immediately crash the app in which the calls are (those calls in .NET 4.0 works fine). Those methods are found inside System.dll, and I assume call native methods which I believe are inside winnsi.dll or iphlpapi.dll or something else (I've not found this yet); I assume it calls native methods because the exception which causes the crash is Fatal Execution Engine Error which people mention is usually related to calling native methods and marshaling data between them. A huge clue about the culprit is likely found in the fact that when I launch the exact same crashing application through a code profiler (which executes the exe and captures stats on which methods took the longest) the app works fine, no crash at all! How could running it within the profiler work and running it outside not work? That seems the key to the mystery. I've used procmon to catch all the registry, filesystem, and network events from the crashing execution and the profiler-run successful execution and compared the two outputs but didn't learn much (I see the moment at which the non-profiled app crashes, but up until then they behave the same, loaded the same modules, ). The only big difference seems to be that at the moment before the app crash the profiler-executed code creates 4-6 new threads and the directly executed code only creates 1-2. I have diffed the files/directories which seemed most relevant (the .NET stuff under Windows and Program Files) pre- and post- disk trouble and seen no changes where I didn't expect any (no obvious file corruption). I have diffed the software and system registry hives pre- and post- disk trouble and seen no changes which seemed relevant. I have created a new user account and cleaned up any environment variables in case environment was related. No change. I did "sfc /scannow" and it found no integrity problems. I tried "ngen update" to regenerate pre-compiled code in case I missed something that might be damaged and nothing changed. I assume I need to repair my .NET installation but because Windows 7 included .NET 3.5 - 2.0 you can't just re-run a .NET installer to redo it. I do not have access to the Windows disks to try to re-install Windows over itself (the computer has a recovery partition but it is unusable); also the drive uses a whole-disk encryption solution and re-installing would be difficult. I absolutely do not want to start from scratch here and install a fresh Windows, reinstall dozens of software packages, try and remember dozens of development-related customizations/etc. Given all that... does anyone have any helpful advice? I need .NET 3.5 - 2.0 working as I am a developer and need to build and test against it. Thanks! Quinxy

  Read the article

• Can't get network bridging to work

  - by Antonis Christofides

  I'm trying to make network bridging to work on a Debian squeeze (I'm experimenting in order to make a QEMU/KVM virtual machine that will be visible to the outside network as if it were a distinct machine). The problem is that when I type brctl addif br0 eth0 then I lose connectivity to the network until I type brctl delif br0 eth0. More specifically, here's how my machine looks like before I do anything (essentially eth0 is listening on 147.102.160.153): root@laura:/home/anthony# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 8c:73:6e:db:1c:1b brd ff:ff:ff:ff:ff:ff inet 147.102.160.153/24 brd 147.102.160.255 scope global eth0 inet6 2001:648:2000:a0:8e73:6eff:fedb:1c1b/64 scope global dynamic valid_lft 2591848sec preferred_lft 604648sec inet6 fe80::8e73:6eff:fedb:1c1b/64 scope link valid_lft forever preferred_lft forever 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN qlen 1000 link/ether 4c:ed:de:8e:44:d7 brd ff:ff:ff:ff:ff:ff 4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff 5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether ee:7c:88:59:d0:e8 brd ff:ff:ff:ff:ff:ff Now let me add the bridge: root@laura:/home/anthony# brctl addbr br0 root@laura:/home/anthony# ip tuntap add dev tap0 mode tap root@laura:/home/anthony# ip link set tap0 up root@laura:/home/anthony# brctl addif br0 tap0 Until here everything continues to work normally. Finally, I try to add eth0 to the bridge: root@laura:/home/anthony# brctl addif br0 eth0 At this point, I no longer have a network connection. If I try to ping something, it tells "Destination Host Unreachable". The output of ip addr show seems normal: root@laura:/home/anthony# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 8c:73:6e:db:1c:1b brd ff:ff:ff:ff:ff:ff inet 147.102.160.153/24 brd 147.102.160.255 scope global eth0 inet6 2001:648:2000:a0:8e73:6eff:fedb:1c1b/64 scope global dynamic valid_lft 2591908sec preferred_lft 604708sec inet6 fe80::8e73:6eff:fedb:1c1b/64 scope link valid_lft forever preferred_lft forever [snip wlan0, vboxnet0 and pan0, which are down and irrelevant] 8: br0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 16:30:f2:67:ab:75 brd ff:ff:ff:ff:ff:ff 9: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether 16:30:f2:67:ab:75 brd ff:ff:ff:ff:ff:ff inet6 fe80::1430:f2ff:fe67:ab75/64 scope link valid_lft forever preferred_lft forever Also: root@laura:/home/anthony# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 147.102.160.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0.0.0.0 147.102.160.200 0.0.0.0 UG 0 0 0 eth0 I can't understand what I'm doing wrong. I want the machine to continue to listen on 147.102.160.153 on eth0, and in addition to that I want to have a tap0 interface, bridged to eth0, that will be available to the guest machine so that the latter listens on another ip address (say 147.102.160.205). (If there's another way to achieve what I want, I'm also interested.)

  Read the article

• how to make bridge networking with KVM work in Fedora19

  - by netllama

  I'm attempting to get several virtual machines setup on a Fedora-19 host system, with the traditional bridge network devices (br0, br1, etc). I've done this many times before with older versions of Fedora (16, 14, etc), and it just works. However, for reasons that I cannot figure out, the bridge doesn't seem to be working in Fedora19. While I can successfully connect to the outside world (local network + internet) from inside a VM, nothing can communicate with the VM from outside (local network). I'm referring to something as trivial as pinging. From inside the VM, I can ping anything successfully (0% packet loss). However, from outside the VM (on the host, or any other system on the same network), I see 100% packet loss when pinging the IP address of the VM. My first question is simply, does anyone else have this working successfully in F19? And if so, what steps did you need to follow? I'm not using NetworkManager at all, its all the network service. There are no firewalls involved anywhere (iptables & firewall services are currently disabled). Here's the current host configuration: # brctl show bridge name bridge id STP enabled interfaces br0 8000.38eaa792efe5 no em2 vnet1 br1 8000.38eaa792efe6 no em3 br2 8000.38eaa792efe7 no em4 vnet0 virbr0 8000.525400db3ebf yes virbr0-nic # more /etc/sysconfig/network-scripts/ifcfg-em2 TYPE=Ethernet BRIDGE="br0" NAME=em2 DEVICE="em2" UUID=aeaa839e-c89c-4d6e-9daa-79b6a1b919bd ONBOOT=yes HWADDR=38:EA:A7:92:EF:E5 NM_CONTROLLED="no" # more /etc/sysconfig/network-scripts/ifcfg-br0 TYPE=Bridge NM_CONTROLLED="no" BOOTPROTO=dhcp NAME=br0 DEVICE="br0" ONBOOT=yes # ifconfig em2 ;ifconfig br0 em2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::3aea:a7ff:fe92:efe5 prefixlen 64 scopeid 0x20<link> ether 38:ea:a7:92:ef:e5 txqueuelen 1000 (Ethernet) RX packets 100093 bytes 52354831 (49.9 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 25321 bytes 15791341 (15.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device memory 0xf7d00000-f7e00000 br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.31.99.226 netmask 255.255.252.0 broadcast 10.31.99.255 inet6 fe80::3aea:a7ff:fe92:efe5 prefixlen 64 scopeid 0x20<link> ether 38:ea:a7:92:ef:e5 txqueuelen 0 (Ethernet) RX packets 19619 bytes 1963328 (1.8 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 11 bytes 1074 (1.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 Relevant section from /etc/libvirt/qemu/foo.xml (one of the VMs with this problem): <interface type='bridge'> <mac address='52:54:00:26:22:9d'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> # ps -ef | grep qemu qemu 1491 1 82 13:25 ? 00:42:09 /usr/bin/qemu-system-x86_64 -machine accel=kvm -name cuda-linux64-build5 -S -machine pc-0.13,accel=kvm,usb=off -cpu SandyBridge,+pdpe1gb,+osxsave,+dca,+pcid,+pdcm,+xtpr,+tm2,+est,+smx,+vmx,+ds_cpl,+monitor,+dtes64,+pbe,+tm,+ht,+ss,+acpi,+ds,+vme -m 16384 -smp 6,sockets=6,cores=1,threads=1 -uuid 6e930234-bdfd-044d-2787-22d4bbbe30b1 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/cuda-linux64-build5.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=/var/lib/libvirt/images/cuda-linux64-build5.img,if=none,id=drive-virtio-disk0,format=raw,cache=writeback -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -netdev tap,fd=25,id=hostnet0,vhost=on,vhostfd=26 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:26:22:9d,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -vnc 127.0.0.1:1 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 I can provide additional information, if requested. thanks!

  Read the article

• Openswan ipsec transport tunnel not going up

  - by gparent

  On ClusterA and B I have installed the "openswan" package on Debian Squeeze. ClusterA ip is 172.16.0.107, B is 172.16.0.108 When they ping one another, it does not reach the destination. /etc/ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification config setup protostack=netkey oe=off conn L2TP-PSK-CLUSTER type=transport left=172.16.0.107 right=172.16.0.108 auto=start ike=aes128-sha1-modp2048 authby=secret compress=yes /etc/ipsec.secrets: 172.16.0.107 172.16.0.108 : PSK "L2TPKEY" 172.16.0.108 172.16.0.107 : PSK "L2TPKEY" Here is the result of ipsec verify on both machines: root@cluster2:~# ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.28/K2.6.32-5-amd64 (netkey) Checking for IPsec support in kernel [OK] NETKEY detected, testing for disabled ICMP send_redirects [OK] NETKEY detected, testing for disabled ICMP accept_redirects [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [FAILED] Checking for 'ip' command [OK] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] root@cluster2:~# This is the end of the output of ipsec auto --status: 000 "cluster": 172.16.0.108<172.16.0.108>[+S=C]...172.16.0.107<172.16.0.107>[+S=C]; prospective erouted; eroute owner: #0 000 "cluster": myip=unset; hisip=unset; 000 "cluster": ike_life: 3600s; ipsec_life: 28800s; rekey_margin: 540s; rekey_fuzz: 100%; keyingtries: 0 000 "cluster": policy: PSK+ENCRYPT+COMPRESS+PFS+UP+IKEv2ALLOW+lKOD+rKOD; prio: 32,32; interface: eth0; 000 "cluster": newest ISAKMP SA: #1; newest IPsec SA: #0; 000 "cluster": IKE algorithm newest: AES_CBC_128-SHA1-MODP2048 000 000 #3: "cluster":500 STATE_QUICK_R0 (expecting QI1); EVENT_CRYPTO_FAILED in 298s; lastdpd=-1s(seq in:0 out:0); idle; import:admin initiate 000 #2: "cluster":500 STATE_QUICK_I1 (sent QI1, expecting QR1); EVENT_RETRANSMIT in 13s; lastdpd=-1s(seq in:0 out:0); idle; import:admin initiate 000 #1: "cluster":500 STATE_MAIN_I4 (ISAKMP SA established); EVENT_SA_REPLACE in 2991s; newest ISAKMP; lastdpd=-1s(seq in:0 out:0); idle; import:admin initiate 000 Interestingly enough, if I do ike-scan on the server here's what happens: Doesn't seem to take my ike settings into account root@cluster1:~# ike-scan -M 172.16.0.108 Starting ike-scan 1.9 with 1 hosts (http://www.nta-monitor.com/tools/ike-scan/) 172.16.0.108 Main Mode Handshake returned HDR=(CKY-R=641bffa66ba717b6) SA=(Enc=3DES Hash=SHA1 Auth=PSK Group=2:modp1024 LifeType=Seconds LifeDuration(4)=0x00007080) VID=4f45517b4f7f6e657a7b4351 VID=afcad71368a1f1c96b8696fc77570100 (Dead Peer Detection v1.0) Ending ike-scan 1.9: 1 hosts scanned in 0.008 seconds (118.19 hosts/sec). 1 returned handshake; 0 returned notify root@cluster1:~# I can't tell what's going on here, this is pretty much the simplest config I can have according to the examples.

  Read the article

< Previous Page | 115 116 117 118 119 120 121 122 123 124  | Next Page >