Search Results

Search found 8949 results on 358 pages for 'eee pc'.

Page 119/358 | < Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >

  • Win8 x64 Laptop (Samsung) unable to boot after installing Ubuntu

    - by user285872
    I posted here a while back and no one was able to help me so I am going to try to explain my problem better. I have a Samsung series 7 Ultrabook and I connected a USB optical drive with an Ubuntu 14.04 installation disc. I did not set or change any of my partitions, however, as I mainly wanted to just be able to boot from the disc and fool around with Ubuntu. Upon restarting my computer I get a blue-screen message saying: Recovery Your PC needs to be repiared The Boot configuration date file is missing some required information. File: \BCD Error Code: 0xc000000d You'll need to use the recovery tools on your installing media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. However I am never given the option to even try to boot to anything. When I turn my computer on the optical drive spins and then after a moment or two comes to a halt. I turned off safeboot and switched it to CSM (I believe that is what it is called) mode, and that makes it so when I turn my computer on it takes me to a Windows Recovery screen. I am able to change the date I want to recover and view all the applications installed, however upon recovering Windows says "All boot options are tried. Press key to recover with factory image using Recovery or any other keys for next boot loop iteration." It seems to be stuck in a loop. Can someone please help me?! I'm so confused and nothing is working!

    Read the article

  • Grub gives messages about the boot sector being used by other software. What should I do?

    - by Bobble
    This only happens with one of my computers. It is an elderly laptop that has had a long and varied history with several operating systems, but in its retirement it is acting as a server for my home network using Ubuntu 12.04. It is a single-boot system, there are no other systems installed. Every so often, whenever there is a grub upgrade, I notice a message like this: Setting up grub-common (1.99-21ubuntu3.4) ... Installing new version of config file /etc/grub.d/00_header ... Setting up grub2-common (1.99-21ubuntu3.4) ... Setting up grub-pc-bin (1.99-21ubuntu3.4) ... Setting up grub-pc (1.99-21ubuntu3.4) ... /usr/sbin/grub-setup: warn: Sector 32 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track. Installation finished. No error reported. Should I be worried about this? What (if anything) should I do about it?

    Read the article

  • WiFi problems on several Ubuntu installations

    - by Rickyfresh
    Okay this is the first time I have ever had to ask a question as usually the Ubuntu community have answered everything already but on this occasion there are many people asking for the answer but not one good solution has become available so far so someone please help or I will have to install Windows on my sons and my girlfriends PCs and that would be a disaster as I am trying to help convince people to move from Windows. I installed 12.04 on three computers on the same day. Dell Inspiron (Works Perfect) Toshiba Satellite Home built Desktop The Dell works perfect but the other two either keep losing connection to the wireless Internet and even when they are connected they stop connecting to web sites, for some reason it searches Google fine but will not connect to web sites when a link is clicked. So far people have recommended in other forums: Removing network manager and installing wicd (didn't solve it) Changing the MTU in the wireless settings (didn't solve it) All sorts of messing about with Firefox settings (this doesn't solve it and even if it did this would leave most average PC users scratching their heads and wishing they had stuck to windows) The problem exists on two very different machines and different wireless cards so I doubt its a driver or hardware issue, also many other Ubuntu users are having the same problem with a vast array of different machines and wireless cards. Can someone please give a good solution to this as its going to turn a lot of people away from Ubuntu if they cannot get this sorted. I would give some PC specs but the two machines are vastly different and the other people complaining of this problem also have very different systems all showing the same problem.

    Read the article

  • how to recover lost partitions data

    - by TheJoester
    I have a 2TB SATA drive that was being used as file storage on my UBUNTU computer. I was re-imaging my windows box so I used that drive to back up some files to it. I did this by taking the drive from my windows PC and putting it in my UBUNTU PC, mounted it and copied the files over. After the windows refresh I thought it would be easier to take the 2 TB drive and dock it in the external dock my Windows case has built in. Anyway it would recognize in BIOS but windows would not see it (because it was EXT3 or EXT4) so when I went into the disk manager it advised me the drive needed to be initialized. Me not thinking I initialized it as a GUID Partition table. Now it sees it as a blank drive, even in UBUNTU. I have done nothing else to write or change the drive. I was wondering if there is a qay to repair the old partitioning and get access to my files back? many thanks! EDIT: I followed the instructions in the link @kniwor sent me. I used the command sudo gpart -W /dev/sda /dev/sda and here was the result: Guessed primary partition table: Primary partition(1) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) size: 0mb #s(1) s(2861671176-2861671176) chs: (1023/254/63)-(1023/254/63)d (178130/202/1)-(178130/202/1)r Primary partition(2) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) size: 0mb #s(1) s(3484550160-3484550160) chs: (1023/254/63)-(1023/254/63)d (216903/55/1)-(216903/55/1)r Primary partition(3) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Primary partition(4) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Not sure it found what I wanted. suggestions?

    Read the article

  • When uninstalling all GRUB packages for EC2 AMI build script, how do I bypass prompting?

    - by Skaperen
    When I try to uninstall all GRUB packages from the cloud-image version of Ubuntu I use in AWS EC2, I get an interactive prompt. I need put this all in a script under automation, so prompts need to be avoided. I have searched for means to bypass this, and all of the features like debconf apply to prompts for config settings which can be provided in advance. But the prompt I am getting is not a config prompt. It would be in the class of "are you sure" prompts. I tried --force-all and that did not work. The prompt is referring to the files in /boot/grub so I tried by first doing "rm -fr /boot/grub" (they do all go away) and it still prompts to ask me if I want to delete them even though there is nothing to delete. The wording of the prompt is: Do you want to have all GRUB 2 files removed from /boot/grub? This will make the system unbootable unless another boot loader is installed. Remove GRUB 2 from /boot/grub? <YES> <NO> The command I am doing is: dpkg --purge grub-common grub-gfxpayload-lists grub-legacy-ec2 grub-pc grub-pc-bin grub2-common How can I get past this prompt without trying to encapsulate it in something that tries to answer (which itself has issues when there is no TTY so I want to avoid that) ?

    Read the article

  • How to repair ubuntu or restore my windows 7 installation? Nothing helps

    - by AFRIKA
    i had windows 7 installed and I installed ubuntu alongside it. Booted ubuntu and explore it for a while. Turned pc off and went to bed. Next morning wanted to boot into windows but no luck... MBR error... Tried to repair windows using installation disk but it doesn't recognize win installation. Tried console bootrec /fixmbr bootrec /fixboot but still same. So I went back to ubuntu and tried with boot-repair, but got a write error. Restarted pc and now I cannot boot to either ubuntu or windows... Tried to recover NTFS partition with hiren's boot but it cannot find partition. Tried every solution there is on the web but no help... Is there any way to fix it because windows installation is very important to me?! btw, i noticed that grub indicates windows 7 to a sdb2 partition that doesn't exists... And when I RUN ubuntu from CD and browse disk, I dont see any files from windows 7. Is that normal or? http://paste.ubuntu.com/6338340/ PLEASE HELP...

    Read the article

  • Trouble installing from disk

    - by SuperNatural
    I'm writing this in desperation, Windows is slowly killing me and i need to change my home pc os to Ubuntu 11.04 as soon as possible. I created a USB flash drive to install ubuntu, twice, and both times they failed to begin install on restart of my pc. i read on another forum that you might have to change some boot sequence in BIOS but when pressing F2 to enter it didnt work. After a lot of cursing, I made myself an UBUNTU install cd and booted. To my excitement, it now displayed... try ubuntu and install ubuntu. i clicked install ubuntu which lead me to the preparing to install ubuntu display, i checked download updates while installing and clicked forward. The very next display is ' allocate drive space ' i assume there are meant to be options of drives provided but mine is just a blank box and underneath all the options to create a new partition table, add, change, delete and revert are all greyed out. There is a drop down menu labelled 'device for boot loader installlation' but the only option is /dev/sda. when i click install, a no root file system error comes up telling me to please correct from the partitioning menu. I am extremely frustrated. please!! can anyone help me...

    Read the article

  • About output of vga_switcher

    - by zhangjie
    When IGD and DIS both exist in my pc,and I want to disable DIS,so I create a service to switch on and off the DIS.It works.Finally,I decide to add the service command into /etc/rc.local so that DIS will be powered off automatically.Unfortunately,it fails.There's only one command added by myself in the file /etc/rc.local,so I can affirm failure is caused by that added command. Before,I directly added the command "echo OFF /sys/kernel/debug..." into /etc/rc.local,and when I restarted,the system startup fails.So I thought maybe when the command is executed,the DIS hasn't been powered on or ready for work.So conflict occurs!It's just my prediction.Then I added one line command "sleep 1s" before the "echo OFF ...",it works nearly everytime when I start or restart pc,while fails sometimes. The output result of "cat /sys/kernel/debug..." is as following: 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 I want know 0000:00:02.0 means what?Time of first power on? If it was really time,I can set the command "sleep 2s" to wait for DIS powered on then "echo OFF ..." Thanks for your advice!

    Read the article

  • Problem video nvidia ubuntu 12.04

    - by dragonov7
    I just did a fresh install of ubuntu 12.04 on my PC (Dell precision 370) but the video is not working as it should. Problems: When I log in to unity 3D I get a transparent bar (where the firefox, libre office, etc icons are) but I can see the tooltips when I put my mouse over where the icons are, I can see the top toolbar with no problem and I see just white on the rest of the desktop! When I log in using unity 2D I see the left bar cut in half (so I can't see the trash icon that is at the botton), the toolbar at the top shows OK and the desktop show OK but with some apps. For example, if I open a terminal and maximize it, it will only show just where the left toolbar "cuts". But if I open firefox it will open fine. Config: My PC comes with a nvidia quadro nvs 280 and I see that by default ubuntu is using the nouveau driver. Workarounds tried: I tried uninstalling the nouveau driver and the desktop works fine but I can use only unity 2D. I tried installing the nvidia-173 drivers using synaptic but I get "Could not apply changes! Fix broken packages first". I go to "Edit - Fix Broken packages" and I get the error: "E: Unable to correct problem, you have held broken packages.E: Error, PkgProblemResolver::Resolve generated breakes, this may be caused by held packages.E:Unable to correct dependencies" Output of lspci: 01:00.0 VGA compatible controller: NVIDIA Corporation NV37GL [Quadro PCI-E Series] (rev a2) Any idea so as to what I should do? Thanks in advance for any help. PS: Ah, the nvidia-173 driver was working fine on ubuntu 10.04.

    Read the article

  • VCS for single user using file sync service

    - by StackUnder
    I'm trying to setup a version control for my one man project. My project files are in sync thanks to live mesh (but I could be using dropbox for that matter), between my laptop, my home pc and my office pc. I'm now using Netbeans with local file history. Sometimes it helps to revert to a previous state of one file. But imagine a situation when multiple files have problems. Correct me if I'm wrong but I would have to go to every file and revert to previous "safe" state. I don't like this approach, so I'm considering using a version control between SVN and GIT. I have some previous experience with SVN (TortoiseSVN) and I know that I can create a file:// repo. So, what a want to do is setup a VCS inside my synced folder just to have the ability to "revert" to a previous version if something goes wrong. Since everything's been synced to all computers, I wouldn't ever need to run an update. The file tree organization would be the following: C:...\SyncedFolder\MyProject\ Inside MyProject folder are all the project files plus a directory that has SVN or GIT info of my project (the repo/master). What VCS is best for this situation: SVN or GIT? Does SVN need to store all files from HEAD revision, thus "duplicating" all my project inside my synced folder? Does GIT eliminates this problem? Is this the best approach?

    Read the article

  • Installing 11.10 on flash drive failed

    - by lakshitha
    This is my problem. I burned Ubuntu 11.10 iso to a CD. I was able to boot my PC with it. I plugged in my flash drive, and inserted the CD and restarted the computer to boot Ubuntu. I then chose to install Ubuntu alongside with Windows (XP prof.). Then I was able to select my flash drive as the installation location. I prepared partitons by dragging a bar and allocating the size for the Ubuntu installation, and for other files. I set 3GB for ubuntu and 1GB for other files. The pen drive was partitioned and files installed on it. After sucess I ejected the CD to restart the PC to use the new OS. When it restarted I expected to be asked to select an OS to boot. But I could only boot with Windows XP. Properties of my flash drive show its total capacity is 1GB. The partitioned 3GB is missing. How can I boot with the USB stick? How can I get my 4GB USB stick back?

    Read the article

  • Session Cookies and IE 8

    - by Matt Luongo
    I recently built a simple web-app deployed over Tomcat. The app uses pretty standard session based security where a user who has logged in is given a session. Sessions work fine in Firefox and Chrome, but require the use of jsessionid in the URL for IE (tested 7 & 8), set to medium privacy. In IE 8, I tried to override cookie handling, setting "Allow all 3rd party cookies" and "Allow all session cookies"- no dice. However, when I run Tomcat on my local machine, IE accepts the cookie, and sessions work just fine. And now, for the HTTP headers. From Chrome, a logged in user gets a session GET http://devl:8080/testing/ HTTP/1.1 Host: devl:8080 Connection: keep-alive User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1036 Safari/532.5 Accept: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 HTTP/1.1 200 OK Server: Apache-Coyote/1.1 P3P: CP="NON CURa ADMa DEVa TAIa OUR BUS IND UNI COM NAV INT STA" Set-Cookie: JSESSIONID=9280023BCE2046F32B13C89130CBC397; Path=/testing Content-Type: text/html;charset=UTF-8 Content-Language: en-US Content-Length: 2450 Date: Fri, 26 Mar 2010 14:14:40 GMT GET http://devl:8080/testing/logout HTTP/1.1 Host: devl:8080 Connection: keep-alive User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1036 Safari/532.5 Referer: http://devl:8080/testing/ Accept: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Cookie: JSESSIONID=9280023BCE2046F32B13C89130CBC397 ... From IE 8, with standard medium level security and privacy- GET http://devl:8080/testing/ HTTP/1.1 Accept: application/x-ms-application, image/jpeg, application/xaml+xml, image/gif, image/pjpeg, application/x-ms-xbap, */* Accept-Language: en-US User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MDDC; Tablet PC 2.0) UA-CPU: AMD64 Accept-Encoding: gzip, deflate Host: devl:8080 Connection: Keep-Alive HTTP/1.1 200 OK Server: Apache-Coyote/1.1 P3P: CP="NON CURa ADMa DEVa TAIa OUR BUS IND UNI COM NAV INT STA" Set-Cookie: JSESSIONID=192999F922D6E9C868314452726764BA; Path=/testing Content-Type: text/html;charset=UTF-8 Content-Language: en-US Content-Length: 2450 Date: Fri, 26 Mar 2010 14:32:34 GMT GET http://devl:8080/testing/logout HTTP/1.1 Accept: application/x-ms-application, image/jpeg, application/xaml+xml, image/gif, image/pjpeg, application/x-ms-xbap, */* Referer: http://devl:8080/testing/;jsessionid=6371A83EFE39A46997544F9146AA5CEA Accept-Language: en-US User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MDDC; Tablet PC 2.0) UA-CPU: AMD64 Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: devl:8080 ... I thought it might be P3P, but on adding a compact policy, nothing changes. This is the standard Tomcat session, so I'm really surprised I haven't been able to find other people with the same problem so far. Anyone have any ideas?

    Read the article

  • My server app works strangely. What could be the reason(s)?

    - by Poni
    Hi! I've written a server app (two parts actually; proxy server and a game server) using C++ (board game). It uses IOCP as the sockets interface. For that app I've also written a "client simulator" (hereafter "client") app that spawns many client connections, where each of them plays, in very high speed, getting the CPU to be 100% utilized. So, that's how it goes in terms of topology: Game server - holds the game state. Real players do not connect it directly but through the proxy server. When a player joins a game, the proxy actually asks for it on behalf of that player, and the game server spawns a "player instance" for that player, and from now on, every notification between the game server and the player is being passed through the proxy. Proxy server - holds TCP connections with the real players. Players communicate with the game server through it only. Client simulator - connects to the proxy only. When running the server (again, it's actually two server apps) & client locally it all works just fine. I'm talking about 40k+ player instances in which all of them are active in a game. On the other hand, when running the server remotely with, say, 1000 clients who play things getting strange. For example, I run it as said above. Then with Task Manager I kill the client simulator app ("End Process Tree"). Then it seems like the buffer of the remote server got modified by another thread, or in other words, a memory corruption has been occurred. The server crashes because it got an unknown message id (it's a custom protocol where each message has it's own unique number). To make things clear, here is how I run the apps: PC1 - game server and clients simulator (because the clients will connect the proxy). PC2 - proxy server. The strangest thing is this: Only the remote side gets "corrupted". Remote in terms that it's not the PC I use to code the app (VC++ 2008). Let's call the PC I use to code the apps "PC1". Now for example, if this time I ran the game server on PC1 (it means that proxy server on PC2 and clients simulator on PC1), then the proxy server crashes with an "unknown message id" error. Another variation is when I run the proxy server on PC1 (again, the dev machine), the game server and the clients simulator on PC2, then the game server on PC2 gets crashed. As for the IOCP config: The servers' internal connections use the default receive/send buffer sizes. Tried even with setting them to 1MB, but no luck. I have three PCs in total; 2 x Vista 64bit <<-- one of those is the dev machine. The other is connected through WiFi. 1 x WinXP 32bit They're all connected in a "full duplex" manner. What could be the reason? Tried about everything; Stack tracing, recording some actions (like read/write logging).. I want to stress that only the PC I'm not using to code the apps crashes (actually the server app "role" which is running on it - sometimes the game server and sometimes the proxy server). At first I thought that maybe the wireless PC has problems (it's wireless..) but: TCP has it's own mechanisms to make sure the packet is delivered properly. Also, a crash also happens when trying it with the two PCs that are physically connected (Vista vs. XP). Another option is that the Windows DLLs versions might have problems, but then again, one of the tests is Vista vs. Vista, and the other is Vista vs. XP. Any idea?

    Read the article

  • Java CORBA Client Disconnects Immediately

    - by Benny
    I have built a Java CORBA application that subscribes to an event server. The application narrows and logs on just fine, but as soon as an event is sent to the client, it breaks with the error below. Please advise. 2010/04/25!13.00.00!E00555!enserver!EventServiceIF_i.cpp!655!PID(7390)!enserver - e._info=system exception, ID 'IDL:omg.org/CORBA/TRANSIENT:1.0' TAO exception, minor code = 54410093 (invocation connect failed; ECONNRESET), completed = NO EDIT: Please note, this only happens when running on some machines. It works on some, but not others. Even on the same platform (I've tried Windows XP/7 and CentOS linux) Some work, some don't... Here is the WireShark output...looks like the working PC is much more interactive with the network compared to the non-working PC. Working PC No. Time Source Destination Protocol Info 62 28.837255 10.10.10.209 10.10.10.250 TCP 50169 > 23120 [SYN] Seq=0 Win=8192 Len=0 MSS=1260 WS=8 63 28.907068 fe80::5de0:8d21:937e:c649 ff02::1:3 LLMNR Standard query A isatap 64 28.907166 10.10.10.209 224.0.0.252 LLMNR Standard query A isatap 65 29.107259 10.10.10.209 10.255.255.255 NBNS Name query NB ISATAP<00> 66 29.227000 10.10.10.250 10.10.10.209 TCP 23120 > 50169 [SYN, ACK] Seq=0 Ack=1 Win=32768 Len=0 MSS=1260 WS=0 67 29.227032 10.10.10.209 10.10.10.250 TCP 50169 > 23120 [ACK] Seq=1 Ack=1 Win=66560 Len=0 68 29.238063 10.10.10.209 10.10.10.250 GIOP GIOP 1.1 Request s=326 id=5 (two-way): op=logon 69 29.291765 10.10.10.250 10.10.10.209 GIOP GIOP 1.1 Reply s=420 id=5: No Exception 70 29.301395 10.10.10.209 10.10.10.250 GIOP GIOP 1.1 Request s=369 id=6 (two-way): op=registerEventStat 71 29.348275 10.10.10.250 10.10.10.209 GIOP GIOP 1.1 Reply s=60 id=6: No Exception 72 29.405250 10.10.10.209 10.10.10.250 TCP 50170 > telnet [SYN] Seq=0 Win=8192 Len=0 MSS=1260 WS=8 73 29.446055 10.10.10.250 10.10.10.209 TCP telnet > 50170 [SYN, ACK] Seq=0 Ack=1 Win=32768 Len=0 MSS=1260 WS=0 74 29.446128 10.10.10.209 10.10.10.250 TCP 50170 > telnet [ACK] Seq=1 Ack=1 Win=66560 Len=0 75 29.452021 10.10.10.209 10.10.10.250 TELNET Telnet Data ... 76 29.483537 10.10.10.250 10.10.10.209 TELNET Telnet Data ... 77 29.483651 10.10.10.209 10.10.10.250 TELNET Telnet Data ... 78 29.523463 10.10.10.250 10.10.10.209 TCP telnet > 50170 [ACK] Seq=4 Ack=5 Win=32768 Len=0 79 29.554954 10.10.10.209 10.10.10.250 TCP 50169 > 23120 [ACK] Seq=720 Ack=505 Win=66048 Len=0 Non-working PC No. Time Source Destination Protocol Info 1 0.000000 10.10.10.209 10.10.10.250 TCP 64161 > 23120 [SYN] Seq=0 Win=8192 Len=0 MSS=1260 WS=8 2 2.999847 10.10.10.209 10.10.10.250 TCP 64161 > 23120 [SYN] Seq=0 Win=8192 Len=0 MSS=1260 WS=8 3 4.540773 Cisco_3c:78:00 Cisco-Li_55:87:72 ARP Who has 10.0.0.1? Tell 10.10.10.209 4 4.540843 Cisco-Li_55:87:72 Cisco_3c:78:00 ARP 10.0.0.1 is at 00:1a:70:55:87:72 5 8.992284 10.10.10.209 10.10.10.250 TCP 64161 > 23120 [SYN] Seq=0 Win=8192 Len=0 MSS=1260

    Read the article

  • Do classes which have a vector has a member have memory issues

    - by user263766
    I am just starting out C++, so sorry if this is a dumb question. I have a class Braid whose members are vectors. I have not written an assignment operator. When I do a lot of assignments to an object of the type Braid, I run into memory issues :- 0 0xb7daff89 in _int_malloc () from /lib/libc.so.6 #1 0xb7db2583 in malloc () from /lib/libc.so.6 #2 0xb7f8ac59 in operator new(unsigned int) () from /usr/lib/libstdc++.so.6 #3 0x0804d05e in __gnu_cxx::new_allocator<int>::allocate (this=0xbf800204, __n=1) at /usr/lib/gcc/i686-pc-linux-gnu/4.4.3/../../../../include/c++/4.4.3/ext/new_allocator.h:89 #4 0x0804cb0e in std::_Vector_base<int, std::allocator<int> >::_M_allocate (this=0xbf800204, __n=1) at /usr/lib/gcc/i686-pc-linux-gnu/4.4.3/../../../../include/c++/4.4.3/bits/stl_vector.h:140 #5 0x0804c086 in _Vector_base (this=0xbf800204, __n=1, __a=...) at /usr/lib/gcc/i686-pc-linux-gnu/4.4.3/../../../../include/c++/4.4.3/bits/stl_vector.h:113 #6 0x0804b4b7 in vector (this=0xbf800204, __x=...) at /usr/lib/gcc/i686-pc-linux-gnu/4.4.3/../../../../include/c++/4.4.3/bits/stl_vector.h:242 #7 0x0804b234 in Braid (this=0xbf800204) at braid.h:13 #8 0x080495ed in Braid::cycleBraid (this=0xbf8001b4) at braid.cpp:191 #9 0x080497c6 in Braid::score (this=0xbf800298, b=...) at braid.cpp:251 #10 0x08049c46 in Braid::evaluateMove (this=0xbf800468, move=1, pos=0, depth=2, b=...) I suspect that these memory issues are because the vectors are getting resized. What I want to know is whether objects of type Braid automatically expand when its members expand? he code I am writing is really long so I will post the section which is causing the problems. Here is the relevant section of the code :- class Braid { private : vector<int> braid; //Stores the braid. int strands; vector < vector<bool> > history; vector < vector<bool> > CM; public : Braid () : strands(0) {} Braid operator * (Braid); Braid* inputBraid(int,vector<int>); int printBraid(); int printBraid(vector<vector<int>::iterator>); vector<int>::size_type size() const; ..... ..... } Here is the function which causes the issue :- int Braid::evaluateMove(int move,int pos,int depth,Braid b) { int netscore = 0; Braid curr(*this); curr = curr.move(move,pos); netscore += curr.score(b); while(depth > 1) { netscore += curr.evaluateMove(1,0,depth,b); netscore += curr.evaluateMove(2,0,depth,b); for(int i = 0; i < braid.size();++i) { netscore += curr.evaluateMove(3,i,depth,b); netscore += curr.evaluateMove(4,i,depth,b); netscore += curr.evaluateMove(5,i,depth,b); curr = curr.cycleBraid(); netscore += curr.evaluateMove(6,0,depth,b); } --depth; } return netscore; }

    Read the article

  • XNA Notes 002

    - by George Clingerman
    This past week (much like every week in the XNA community) was filled with things happening and people doing cool things (and getting noticed for doing cool things!). You can definitely tell there are some Xbox LIVE Indie game developers starting to make some names for themselves. Can’t wait to name drop them at bars. Me- “Oh you played Game X? Yeah, I know the guy that made that. Pretty cool guy.” Yeah, I’ll be THAT guy.   Time Critical XNA News 30 days left to submit XBLIGs made in XNA Game Studio 3.1 http://blogs.msdn.com/b/xna/archive/2011/01/08/30-days-left-to-submit-xna-gs-3-1-games-to-app-hub.aspx Jeromy Walsh wants you to know his XNA 4.0 Winter Workshop starting soon, go get signed up! And the forum is now LIVE on GameDev.net http://gamedevelopedia.com/ http://tinyurl.com/4gg2cfv The XNA Team Per Nick Gravelyn, Aaron Stebner’s blog post is a must read for icons on Windows Phone http://forums.create.msdn.com/forums/p/72022/439597.aspx#439597 http://blogs.msdn.com/b/astebner/archive/2010/10/01/10070507.aspx Shawn Hargreaves writes about Sprite Billboards in a 3D world http://blogs.msdn.com/b/shawnhar/archive/2011/01/12/spritebatch-billboards-in-a-3d-world.aspx XNA MVPs Andy “The ZMan” Dunn wants YOU to come to the MVP Summit and run a 5K http://www.indiegameguy.com/blogs/zman/archive/2010/12/26/come-to-the-mvp-summit-and-run-a-5k-yes-you.aspx Jim Perry updates his forum signature just to make it clear that he’s not speaking for Microsoft or giving official information (LOL, thanks Jim, now if only people will take the time to read that...) XNA MVP | Please use the Forum Search and read the Forum FAQs | My posts are not official info http://forums.create.msdn.com/forums/p/70849/439613.aspx#439613 XNA Developers Robert Boyd (@werezombie) working hard at converting his RPG engine used to make Breath of Death VII and Chtulu Saves the World to XNA 4.0. If you haven’t done the upgrade yet yourself, might be useful to read back through his tweets and recent forum posts to see the problems/solutions he’s encountered. http://forums.create.msdn.com/forums/p/71834/438099.aspx#438099 http://www.twitter.com/werezompire SpynDoctorGames is in the final phase before the release of Your Doodles are Bugged for the PC! Going to be interesting to watch as more XNA game developers explore the PC game market for their games. http://twitter.com/SpynDoctorGames/statuses/24503173217521664 http://www.spyn-doctor.de @DrMistry shares some details of his next title YoYoYo http://www.mstargames.co.uk/mistryblogmain/35-genblog/177-a-new-year-a-new-game-and-maybe-a-new-approach.html Travis Woodward (@RabidLionGames) has a blog post coming this weekend on Farseer and Mario-like platformer movement. http://twitter.com/RabidLionGames/statuses/24992762021548032 http://www.rabidlion.com/ S4G Interview with Radiangames http://n4g.com/news/679492/s4g-interview-with-radiangames XBLAratings.com interviews Steve Flores (@DragonDivide) developer of Alpha Squad http://www.xblaratings.com/developer-qaa/3621-alpha-squad-developer-interview XBox LIVE Indie Games If you haven’t been reading the roundups on IndieGames by NaviFairy on GayGamer, you’ve been missing out! http://gaygamer.net/2011/01/xbox_indie_review_roundup_1112.html Armless Octopus posts the Top 20 Games of 2010 Part 1 http://www.armlessoctopus.com/2011/01/10/top-20-xbox-live-indie-games-of-2010-part-1/ Armless Octopus posts the Top 20 Games of 2010 Part 2 http://www.armlessoctopus.com/2011/01/12/top-20-xbox-live-indie-games-of-2010-%E2%80%93-part-2/ Xbox LIVE Indie Game Reviews http://www.gamemarx.com/ Don’t forget to be following @XboxHornet . That’s a great way to snag free copies of Xbox LIVE Indie Games http://twitter.com/XboxHornet/statuses/24471103808208896 http://www.xboxhornet.com/wordpress/ Xbox LIVE Indie Game Review posts the top 20 Xbox 360 LIVE Indie Games of 2010 http://www.xbox-360-community-games-reviews.com/top-20-best-xbox-360-live-indie-games-of-2010/ VVGtv to Stream #XBLIG Again! Help out if you can. http://vvgtv.com/2011/01/07/vvgtv-to-stream-xblig-again/ Indie Gamer Magazine Issue 14 has a look at the Xbox LIVE Winter Indie Game Uprisiing http://www.indiegamemag.com/issue14/ XNA Game Development Andrew Russell announced and asked for help in his development of ExEn: XNA for iPhone, Android and Silverlight http://rockethub.com/projects/752-exen-xna-for-iphone-android-and-silverlight App Hub forums letting you down? Don’t forget about StackOverflow and the game development specific version gamedev.stackexchange http://stackoverflow.com/questions/tagged/xna http://gamedev.stackexchange.com/questions/tagged/xna Transmute gets an update from Aaron Foley (@slyprid) and you can now add and visually edit parallax layers to your 2D tile game. http://twitpic.com/3nudj0 http://twitter.com/slyprid/statuses/23418379574448128 http://forgottenstarstudios.com/Transmute/default.html Webcomics Weekly #75 touches on some feelings I’ve seen people try to express (myself included) when talking about game development and what types of games should be released for XBLIG http://www.pvponline.com/2011/01/05/webcomics-weekly-75-sour-oats/ Setting up a new PC for XNA development? Here’s a site that helps you quickly build a installer for all the most common applications developers use. http://ninite.com/ Fun wew thread on the XNA forums asking XBLIG/XNA developers just what their Top 10 favorite video games of all time are. http://forums.create.msdn.com/forums/107.aspx Christopher Hill (@Xalterax) stumbled across an entire community that does nothing but create box art. This is a great potential resource for Xbox LIVE Indie Game developers to get some awesome box art for their games. http://forums.create.msdn.com/forums/p/46582/441451.aspx#441451 http://www.vgboxart.com/browse/plat/360/ Don’t forget about the XNA Wiki, fantastic community resource (and roll up those sleeves and contribute already!) http://xnawiki.com/index.php?title=Main_Page

    Read the article

  • My Feelings About Microsoft Surface

    - by Valter Minute
    Advice: read the title carefully, I’m talking about “feelings” and not about advanced technical points proved in a scientific and objective way I still haven’t had a chance to play with a MS Surface tablet (I would love to, of course) and so my ideas just came from reading different articles on the net and MS official statements. Remember also that the MVP motto begins with “Independent” (“Independent Experts. Real World Answers.”) and this is just my humble opinion about a product and a technology. I know that, being an MS MVP you can be called an “MS-fanboy”, I don’t care, I hope that people can appreciate my opinion, even if it doesn’t match theirs. The “Surface” brand can be confusing for techies that knew the “original” surface concept but I think that will be a fresh new brand name for most of the people out there. But marketing department are here to confuse people… so I can understand this “recycle” of an existing name. So Microsoft is entering the hardware arena… for me this is good news. Microsoft developed some nice hardware in the past: the xbox, zune (even if the commercial success was quite limited) and, last but not least, the two arc mices (old and new model) that I use and appreciate. In the past Microsoft worked with OEMs and that model lead to good and bad things. Good thing (for microsoft, at least) is market domination by windows-based PCs that only in the last years has been reduced by the return of the Mac and tablets. Google is also moving in the hardware business with its acquisition of Motorola, and Apple leveraged his control of both the hardware and software sides to develop innovative products. Microsoft can scare OEMs and make them fly away from windows (but where?) or just lead the pack, showing how devices should be designed to compete in the market and bring back some of the innovation that disappeared from recent PC products (look at the shelves of your favorite electronics store and try to distinguish a laptop between the huge mass of anonymous PCs on displays… only Macs shine out there…). Having to compete with MS “official” hardware will force OEMs to develop better product and bring back some real competition in a market that was ruled only by prices (the lower the better even when that means low quality) and no innovative features at all (when it was the last time that a new PC surprised you?). Moving into a new market is a big and risky move, but with Windows 8 Microsoft is playing a crucial move for its future, trying to be back in the innovation run against apple and google. MS can’t afford to fail this time. I saw the new devices (the WinRT and Pro) and the specifications are scarce, misleading and confusing. The first impression is that the device looks like an iPad with a nice keyboard cover… Using “HD” and “full HD” to define display resolution instead of using the real figures and reviving the “ClearType” brand (now dead on Win8 as reported here and missed by people who hate to read text on displays, like myself) without providing clear figures (couldn’t you count those damned pixels?) seems to imply that MS was caught by surprise by apple recent “retina” displays that brought very high definition screens on tablets.Also there are no specifications about the processors used (even if some sources report NVidia Tegra for the ARM tablet and i5 for the x86 one) and expected battery life (a critical point for tablets and the point that killed Windows7 x86 based tablets). Also nothing about the price, and this will be another critical point because other platform out there already provide lots of applications and have a good user base, if MS want to enter this market tablets pricing must be competitive. There are some expansion ports (SD and USB), so no fixed storage model (even if the specs talks about 32-64GB for RT and 128-256GB for pro). I like this and don’t like the apple model where flash memory (that it’s dirt cheap used in thumdrives or SD cards) is as expensive as gold (or cocaine to have a more accurate per gram measurement) when mounted inside a tablet/phone. For big files you’ll be able to use external media and an SD card could be used to store files that don’t require super-fast SSD-like access times, I hope. To be honest I really don’t like the marketplace model and the limitation of Windows RT APIs (no local database? from a company that based a good share of its success on VB6+Access!) and lack of desktop support on the ARM (even if the support is here and has been used to port office). It’s a step toward the consumer market (where competitors are making big money), but may impact enterprise (and embedded) users that may not appreciate Windows 8 new UI or the limitations of the new app model (if you aren’t connected you are dead ). Not having compatibility with the desktop will require brand new applications and honestly made all the CPU cycles spent to convert .NET IL into real machine code in the past like a huge waste of time… as soon as a new processor architecture is supported by Windows you still have to rewrite part of your application (and MS is pushing HTML5+JS and native code more than .NET in my perception). On the other side I believe that the development experience provided by Visual Studio is still miles (or kilometres) ahead of the competition and even the all-uppercase menu of VS2012 hasn’t changed this situation. The new metro UI got mixed reviews. On my side I should say that is very pleasant to use on a touch screen, I like the minimalist design (even if sometimes is too minimal and hides stuff that, in my opinion, should be visible) but I should also say that using it with mouse and keyboard is like trying to pick your nose with boxing gloves… Metro is also very interesting for embedded devices where touch screen usage is quite common and where having an application taking all the screen is the norm. For devices like kiosks, vending machines etc. this kind of UI can be a great selling point. I don’t need a new tablet (to be honest I’m pretty happy with my wife’s iPad and with my PC), but I may change my opinion after having a chance to play a little bit with those new devices and understand what’s hidden under all this mysterious and generic announcements and specifications!

    Read the article

  • Wireless networking on Gnome on Ubuntu 9 / 10

    - by WaveyDavey
    So here's my problem: I have some netbooks (ASUS eee, and ACER Aspire Ones) that I've been tasked to set up as kiosk machines, locked up tight for normal users. I am a command-line, server man, so this gnome malarkey is all a bit new to me. I found a lovely 9.04 kiosk livecd that installs and runs exactly as I want it to, but I can't get the wireless working. So I dropped on a full 10.4 distro, and wireless works straight out of the box (so hardware is good) - all I needed to do was right-click on the network connection icon, enter my SSID and password (WPA/WPA2) and away it went, perfect. Further investigation on 10.4 distro shows that /etc/networking/interfaces is virtually empty (just auto lo iface lo inet loopback in it), even after I have set up the wireless thru the gnome taskbar applet (is that the right word?). So where does gnome / ubuntu store the network settings to bring the blasted wireless connection up, and what do I need to do on the kiosk version to get wireless running?

    Read the article

  • Windows XP won't boot after drive transplant

    - by Nathan
    Hi all, I moved my hard drive from my Lenovo laptop into my Asus Eee PC netbook. When I started the netbook, after POST all I got was a black screen with a cursor in the upper left corner. I thought that the migration should work OK because this was a 32-bit version of Windows XP, and the Atom processor in the Asus should support the x86 instruction set. However, I don't know much about Windows, so maybe this was a dumb thought. I did verify that the BIOS can find the drive. It required major surgery to replace the drive, so any solution requiring me to remove the transplant drive is not going to fly. Keeping in mind that the netbook has no optical drive and that I have no other Windows computers (all my other computers run Linux), is there any way I can fix this problem? Thanks! Nathan

    Read the article

  • Blinking cursor after repair install on Win XP

    - by Nathan
    I have an Asus Eee PC netbook which I upgraded the drive of. After some shenanigans, I was able to do a repair install from my Windows XP CD. However, I still have a blinking cursor in the upper-left-hand corner after POST. I tried going into the recovery console and doing chkdsk/fixboot/fixmbr with no effect. Any suggestions would be appreciated! (Sorry if it's inappropriate to post a followup as a new question; I'm not sure how I should do it in a way that will cause it to actually be seen). Thanks, Nathan

    Read the article

  • Global hotkeys: songbird on KDE

    - by alpha1
    I'm running songbird on opensuse 11.2 KDE 4.3.1 on my EEE pc. On windows, there is a hotkey thing inside Songbird, so i set META F9,10,11,12 as media keys and it work just fine. On linux, there is not hotkey thing in songbird, and I would like to set those same hotkeys. I've played around with the Amarok Hotkeys, which are now setup that way, and looked in all the KDE shortcuts, but cannot find a way to add a new program and new hot keys. I know its possible, I did it before once, but the KDE shortcut programs have changed and I no longer see the stuff i used to do it before. I'd like to do the same to banshee at some point, but Songbird is the important program. Any Ideas? Any way to set those keys to generic media buttons?

    Read the article

  • Wireless networking on Gnome on Ubuntu 9 / 10

    - by WaveyDavey
    So here's my problem: I have some netbooks (ASUS eee, and ACER Aspire Ones) that I've been tasked to set up as kiosk machines, locked up tight for normal users. I am a command-line, server man, so this gnome malarkey is all a bit new to me. I found a lovely 9.04 kiosk livecd that installs and runs exactly as I want it to, but I can't get the wireless working. So I dropped on a full 10.4 distro, and wireless works straight out of the box (so hardware is good) - all I needed to do was right-click on the network connection icon, enter my SSID and password (WPA/WPA2) and away it went, perfect. Further investigation on 10.4 distro shows that /etc/networking/interfaces is virtually empty (just auto lo iface lo inet loopback in it), even after I have set up the wireless thru the gnome taskbar applet (is that the right word?). So where does gnome / ubuntu store the network settings to bring the blasted wireless connection up, and what do I need to do on the kiosk version to get wireless running?

    Read the article

  • Rugged Netbook and software options for Running R statistical software?

    - by Thomas
    I am interested in purchasing a netbook to do field research in another country. My hardware specifications for the nebtook: -Be rugged enough to survive a bit of wear and tear -Fairly fast processing (the ability to upgrade from 1GB of RAM to 2GB) -A battery life of longer than 6 hours -At least a 10 inch screen -A decent camera for Skyping My software needs: -Be able run a Spreadsheet program to do basic data input (like Excel or Open Office) -Use the Open Source Statistical Program R to do basic data analysis (Regression, data analysis etc.) -Word Processing (Word or Open Office) Do you have any suggestions on which models or brands my fit my needs? Some of the models I was considering: Samsung NB-30 Toshiba NB 305 Asus Eee PC 1005HA Lenovo S10-2 Also any recommendations on the best software to load on the aforementioned Netbooks. I saw this resource from [livehacker][6] Any comments. Thanks for your help! -Thomas

    Read the article

  • Monitor sleep in Windows XP does not work. Is there an add on to force it?

    - by bert
    I have an EEE box with XP Home and a DVI connected TFT, and it does not sleep the monitor. It only starts working after I go to the energy control panel and turn it off and on again. Then the timed sleep works for the current session of computer use. After a shut down and boot next day, sleep does not work again (it is still set in the preferences however). What can hold the sleep function from working? Are there issues with Skype or MSN? Is there a utility to be less critic to processes interrupting sleep and offer a more reliable monitor sleep function for XP?

    Read the article

  • Writing an internal disk from IMG, what XP software to use?

    - by Andrew Swift
    I am trying to install the Chromium OS on an EEE PC 901, and I have succeeded in using Image Writer for Windows 0.2r23 to copy the IMG file to an SDHC card. Since the OS speed is limited by slow card access, I'd like to install the Chromium OS on the second, unused, internal SSD Drive, D:. However, Image Writer doesn't allow me to restore an internal drive from an IMG file. To be clear: I boot in XP on C: then run Image Writer to install the Chromium OS. Does anyone know how I can either convince Image Writer that D: is a removable drive or know of alternative program that will let me restore D: from an IMG file (non-windows file system)?

    Read the article

< Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >