Search Results

Search found 19446 results on 778 pages for 'naive machine learner'.

Page 119/778 | < Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >

• Unable to access network resources through VPN

  - by fbueckert

  I'm currently attempting to connect one of our computers in the office to a client VPN. My development machine is running Windows 7, and can connect and see resources just fine. The problem computer is running Windows XP. They're both within the same network. Using the same credentials at both computers, the VPN connection (using the built in Windows network connections) works just fine. So far, so good. An IP address is assigned, and comparing both machines shows they're still in the same subnet. The problem is that the XP machine cannot see ANY of the computers in the client network. I tried a tracert to a target machine on the Windows 7 box, and the first item that comes up is the .0 address. Pinging it gives responses. Trying it on the Windows XP machine, however, comes up with just timeouts. Trying to trace to www.google.com allows the address to resolve (probably part of the cached resolutions), but results in just timeouts. I double-checked to make sure that the Windows firewall was not on, and trying to open the settings brings up a notification that the firewall service wasn't running, which leads me to believe that it's definitely not on. From my best guess, I've managed to connect the XP machine to a black hole of some sort. There's obviously something strange going on, but I'm not sure where I should be looking.

  Read the article

• About the External Graphics Card and CPU usage

  - by Balaji

  We are Rendering 16 live Streams at our client machine through one of our applications and the resolution of the video streams are as 4CIF/MPEG4/25FPS/4000Kbits. The configuration of the client machine is below. HP Desktop Machine: Microsoft Windows XP Intel (R) Core2 Duo CPU E8400 @ 3.00 GHz 2.99 GHz, 1.94 GB of RAM Intel (R) Q45/Q43 Series Express Chipset (Inbuild) The CPU usage of the machine peaks 99% for 16 streams. After some discussion, we had decided to install external graphics card to reduce the CPU usage. So that, we have tried following graphics cards. NVIDIA Quadro NVS 440 - 128 MB Radeon HD 4350 - 512 MB GDDR2 Redeon HD 4350 - 1GB DDR2 ASUS EAH 4350 Silent 1GB DDR2 But the performance wise there has been no difference - even a drop in performance. So, what is the purpose of these external graphics cards? Really it will reduce the CPU usage? What parameters have to check, if we want to reduce the CPU usage?

  Read the article

• How do UEFI and virtual machines relate to each other?

  - by Iterator

  I am trying to get my head around UEFI (Unified Extensible Firmware Interface) and it's not entirely clear to me how this affects virtual machines. Thus, there are three parts to this question: Is UEFI an advance in hardware support for virtualization? All other things being equal, would a machine with UEFI be more likely to run a virtual machine more efficiently than one without, or does UEFI cause any performance hits that negate any speed improvements from a virtual machine? Would the difference in execution be visible to code running in a virtual machine? (In theory, it shouldn't, but in practice?)

  Read the article

• VMWare Converter recommendations

  - by Tank Szuba

  I have two Ghost 14 backups of my machine. One for the machine fully configured with apps after and XP install and one of the last update before i re-imaged it (it's XP, I re-image about once every six months). I recently wanted to try simply using my initial image in a virtual environment to do my testing that generally causes me to need to re-image. I used the VMWare converter to convert the Ghost images to a virtual machine to use in Virtual box but they fail to properly boot. They get stuck after the bios loads and windows begins loading. If I power down the machine and refire it it will go to the error screen in windows that asks if you would like to boot to a different mode. none selected make any difference. What are some possible errors I should look for in the conversion process or in my settings for the converter?

  Read the article

• Logon Failure: the target account name is incorrect after making a ghost image of a server

  - by cop1152

  I recently replaced a failing SCSI drive in a Windows 2000 server with an IDE drive. I made an image of the SCSI drive and Ghosted it. The purpose of the machine was to give out DHCP at one location and host a couple of files. When I restarted the machine with the new drive, DHCP appears to be working fine, but I cannot get to any of the shares. Instead, I get the following message when attempting to navigate using Explorer. Logon Failure: the target account name is incorrect It appears that this machine is not communicating with the main domain controller. Changes to user accounts (performed on the domain controller) are not replicated on this machine.

  Read the article

• Setting up squid proxy server to in turn connect using another proxy server [closed]

  - by AnkurVj

  My institute uses the Squid proxy server and authentication mechanism requires username and password to be entered. This means that, I can log in on only one machine at a time and Internet access for me is restricted to that machine. I sometimes require Internet access on multiple machines simultaneously. What previosuly worked for me was the following : On one of my own machines A, I set up a Squid proxy server that allowed all local machines without any username and password. I configured rest of the machines to use this machine A as the proxy server. On machine A I logged into the institute proxy server using my browser. This way, I could access Internet from all my machines, by effectively channeling my requests through the server A. Recently, I lost that machine and configuration and now I tried to set it up again in the same manner. However, I cant seem to remember exactly how I made it work. I keep getting Connection Refused (111) on other machines. My guess is that my squid server isnt able to forward requests from other machines to the actual squid server. I could use any help for debugging this problem. I don't want to use alternatives such as ssh tunneling. This solution has worked for me in the past, I just don't remember how to set it up the same way again.

  Read the article

• No Audio from Windows XP after formatting.

  - by karthik

  Hello folks, I have reinstalled in my Windows XP machine. After it is re-isntalled the audio in my machine has failed. I have installed all the device drivers in my mother board. The Realtek Sound driver is also installed. Note: Sound is working when I test the surround settings test in my RealTek program, but unable to play any audio, tried playing both in my local machine and from the internet. Any clues to troubleshoot?

  Read the article

• Selecting Interface for SSH Port Forwarding

  - by Eric Pruitt

  I have a server that we'll call hub-server.tld with three IP addresses 100.200.130.121, 100.200.130.122, and 100.200.130.123. I have three different machines that are behind a firewall, but I want to use SSH to port forward one machine to each IP address. For example: machine-one should listen for SSH on port 22 on 100.200.130.121, while machine-two should do the same on 100.200.130.122, and so on for different services on ports that may be the same across all of the machines. The SSH man page has -R [bind_address:]port:host:hostport listed I have gateway ports enabled, but when using -R with a specific IP address, server still listens on the port across all interfaces: machine-one: # ssh -NR 100.200.130.121:22:localhost:22 [email protected] hub-server.tld (Listens for SSH on port 2222): # netstat -tan | grep LISTEN tcp 0 0 100.200.130.121:2222 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN tcp 0 0 :::80 :::* LISTEN Is there a way to make SSH forward only connections on a specific IP address to machine-one so I can listen to port 22 on the other IP addresses at the same time, or will I have to do something with iptables? Here are all the lines in my ssh config that are not comments / defaults: Port 2222 Protocol 2 SyslogFacility AUTHPRIV PasswordAuthentication yes ChallengeResponseAuthentication no GSSAPIAuthentication no GSSAPICleanupCredentials no UsePAM yes AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL AllowTcpForwarding yes GatewayPorts yes X11Forwarding yes ClientAliveInterval 30 ClientAliveCountMax 1000000 UseDNS no Subsystem sftp /usr/libexec/openssh/sftp-server

  Read the article

• Configure Postfix to use external MX servers for delivery of local mail if user is unknown

  - by mr.b

  I have a following setup: linux box with postfix configured to be responsible for example.com domain domain's MX servers are configured so that mail sent to example.com is sent to google mail servers several user accounts on linux machine exist (same machine also hosts example.com site) When someone from the outside attempts to send mail to address ending with @example.com, it gets routed to google mail (and there handled appropriately). When linux machine tries to send mail to outside world, mail is delivered correctly, as reverse dns and spf records are configured correctly, so linux machine is valid mail sender for example.com domain (along with google mail servers). However, here's the problem. When php application (hosted at linux box) tries to send mail to [email protected] (and someuser doesn't exist on linux box), it fails, since it doesn't even consult google mail servers, but postfix smtp locally concludes that "someuser" is unknown. So, the question is: how do I tell postfix to relay mails sent to @example.com domain to google mail servers (so, to servers specified in MX records), IF and only if a mailbox is not found locally.

  Read the article

• Ubuntu server hangs on reboot "could not stat resume device file"

  - by matnagel

  Instead of booting into the running system this machine stops and on the terminal I can see a message: could not stat resume device file /dev/sdb5 When I attach a keyboard and press enter the boot continues and the machine comes up like normal. But it's essential that this machine comes up under most circumstancs alone. There never was something like a "resume" on this machine. I tried several times to reboot, but this does not happen on all boots, I can not find a pattern here. There is a software raid running on the box. This is the syslog during boot: http://privatepaste.com/ff0fd0a51c/sdabfjahfgasjkgfu4gfsdzjcgfafasdjfhgasdcjfgauzfgafasgdufzg How can I get rid of this boot failure? We do not need resumes and best would be something that works here and now.

  Read the article

• Ubuntu 13.04 under Parallels Desktop - Black Desktop after X Windows Update

  - by Bob Reckhow

  I have been running Ubuntu 13.04 successfully on a MacBook Pro in a virtual machine in Parallels Desktop 9. Today (2013-10-17) after applying today's Ubuntu update, which included updates to X Windows, my Ubuntu 13.04 virtual machine launches, the launcher comes up, but the screen background is solid black, rather than the shaded orange colour of the default desktop background (and my desktop icons are "hidden behind this blackness", as well). I can launch applications from the launcher, and there is a very brief white flash on the screen, and then it returns to black. It's as if there is a "black blanket" covering the entire screen, so there is no way to interact with any application windows using the keyboard or mouse. The icons of the launcher are responsive to the mouse, so I can right-click and quit any application I have launched. But the rest of the screen is non-responsive to keyboard or mouse. This same behaviour happens with two different versions of Parallels Tools, so I am quite sure this is not a Parallels problem per se, although I could believe that it could be a paroblem with the interface between Parallels and this new updated X Windows code. Could anyone tell me what has happened, and how I might be able to fix this problem, so I can continue to use my Ubuntu 13.04 virtual machine? (I do have the option of reverting to a previous version of my virtual machine from before this update, but if possible I would prefer to keep my version of Ubuntu 13.04 up to date with the latest updates.) Thanks, Bob

  Read the article

• A few tips on deploying Secure Enterprise Search with PeopleSoft

  - by Matthew Haavisto

  Oracle's Secure Enterprise Search is part of PeopleSoft now.  It is provided as part of the Peopltools platform as an appliance, and is used with applications starting with release 9.2.  Secure Enterprise Search is a rich and powerful search product that can enhance search and navigation in PeopleSoft applications.  It also provides useful features like facets and filtering that are common in consumer search engines.Several questions have arisen about the deployment of SES and how to administer it and insure optimum performance.  People have also asked about what versions are supported on various platforms.  To address the most common of these questions, we are posting this list of tips.Platform SupportSES 11.1.2.2 does not support some of the platforms supported by PeopleTools, such as Windows 2012 and AIX 7.1. However, PeopleSoft and SES can use different operating system platforms when SES is deployed on a separate machine.SES 11.2.2.2 will have the required platform support for PT 8.53 in the future. We are planning to certify PT 8.53 once the testing is complete in 8.54 development and all platform support is released for 11.2.2.2.ArchitectureWe recommend running SES on a separate machine (from your apps) for two reasons:1.    SES bundles specific WebLogic, Java, and Oracle DB versions and might need different OS patches at a minimum than PeopleSoft. By having SES run on a different machine, these pre-requisites can be managed better through their lifecycle independenly for PeopleSoft and SES.2.    SES is resource intensive - it runs it's own WebLogic and Oracle database. By having SES run on its own machine, sufficient resources can be allocated to SES and free the PeopleSoft servers from impacts of SES load patterns.We will be providing a comprehensive red paper covering PeopleSoft/SES administration in the near future, but until that is published, we'll post tips on this blog.

  Read the article

• Create an AWS AMI for Ubuntu with GUI which automatically launches web browser

  - by Rory MacDonald

  I've got an ubuntu AMI setup with ubuntu desktop installed and Chrome installed and set to boot on load (via the startup programmes menu within the ubuntu desktop) I've created an image of this AMI, but any time I launch a new instance running this, the Ubuntu GUI doesn't seem to load, until I SSH into the machine, enable VNC and then connect via Chicken VNC to the machine. At that point, the desktop appears to load + starts the browser. I really need the machine to boot and the browser to load without having to VNC into the machine.. Any help would be appreciated.

  Read the article

• ActiveDirectory user files aren't being shared? [on hold]

  - by Ryan

  I'm taking a class in college and my current project is to setup Active Directory. So I have two VMs, one is Windows Server 2008 R2 and the other is Windows 7. I setup the domain team15.net (this is the FQDN for the forest) on the W2008 server machine. And then I connected the Windows 7 machine to the team15.net domain, and now I can login to the administrator account on the W2008 machine by using TEAM15\Administrator for the username. However, any files that I add in Windows 7 while logged into TEAM15\Administrator are NOT shown in the Windows 2008 machine. Is this normal? It seems like any files I add to this user in the domain only exists for the machine that I'm currently using. Is it possible to change this so all files for all users are synced to all computers in the domain? If not then what are alternatives? I noticed that back in high school we also used domains but there was a shared drive E:\ that you had to store your files because if you put them on in the desktop instead then they would suddenly disappear once you logged out and back in. How can I setup a shared drive? and which computer would provide the storage for this drive?

  Read the article

• Ping from windows 7 get no reply but sets errorlevel to 0

  - by Doron

  From a Windows 7 machine, I ping an IP address of a turned-off machine. C:\>ping 192.168.1.222 Pinging 192.168.1.222 with 32 bytes of data: Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Ping statistics for 192.168.1.222: Packets: Sent = 3, Received = 3, Lost = 0 (0% loss) Even though there is no reply, the errorlevel is set to 0. What I am trying to do, is figure out if a remote machine is replying to ping. One of my tests is to turn off the machine and ping it. For some reason, ping sets errorlevel to 0.

  Read the article

• Domain: Netlogon event sequence

  - by Bob

  I'm getting really confused, reading tutorials from SAMBA howto, which is hell of a mess. Could you write step-by-step, what events happen upon NetLogon? Or in particular, I can't get these things: I really can't get the mechanism of action of LDAP and its role. Should I think of Active Directory LDS as of its superset? What're the other roles of AD and why this term is nearly a synonym of term "domain"? What's the role of LDAP in the remote login sequence? Does it store roaming user profiles? Does it store anything else? How it is called (are there any upper-level or lower-level services that use it in the course of NetLogon)? How do I join a domain. On the client machine I just use the Domain Controller admin credentials, but how do I prepare the Domain Controller for a new machine to join it. What's that deal of Machine trust accounts? How it is used? Suppose, I've just configured a machine to join a domain, created its machine trust, added its data to the domain controller. How would that machine find WINS server to query it for Domain Controller NetBIOS name? Does any computer name, ending with <1C type, correspond to domain controller? In what cases Kerberos and LM/NTLM are used for authentication? Where are password hashes stored in, say, Windows2000 domain controller? Right in the registry? What is SAM - is it a service, responsible for authentication and sending/storing those passwords and accompanying information, such as groups policies etc.? Who calls it? Does it use Active Directory? What's the role of NetBIOS except by name service? Can you exemplify a scenario of its usage as a "datagram distribution service for connectionless communication" or "session service for connection-oriented communication"? (quoted taken from http://en.wikipedia.org/wiki/NetBIOS_Frames_protocol description of NetBIOS roles) Thanks and sorry for many questions.

  Read the article

• How to troubleshoot ping request time out

  - by user28317

  I have a Windows 7 and an XP machine connected to a NETGEAR wireless router. Both machines can log into the network and surf the web. Both are connecting wirelessly. I can ping the router from each machine and get a reply. I can ping each machine from the router and get a reply. But i cannot ping each machine from the other; getting a request time out. Subnet IP Addresses are 192.168.1.* Router =1; Win7 = 10; XP = 11; Firewall is currently off in both systems. Since i can ping from router im picking that not the problem anyway. If i try to ping from xp to win7 i get Request Timed Out. If i try to ping from Win7 to Xp i get destination host unreachable. What should i do now? Thanks

  Read the article

• Deleting pagefile.sys on shutdown

  - by Daniel E. Shub

  I have a Windows XP machine (it is a VM running in Xen) that I would like to backup. I have enabled ClearPageFileAtShutdown by following MS KB 314834. If I cleanly shutdown the XP machine and then mount the drive in another machine (which is trivial since the machine is virtual) I still have a large pagefile.sys. I was hoping that enabling ClearPageFileAtShutdown would result in a pagefile.sys with a size near zero. I have two questions. First, is it possible to have pagefile.sys be deleted, or have a drastic size reduction, at shutdown? Second, can I exclude pagefile.sys from my backup?

  Read the article

• AXFR problem using gradwell secondary DNS

  - by Roaders

  Hi All I use Gradwell.com to provide secondary DNS but I keep getting e-mails along the lines of the following saying that it's not working: You have asked us to provide a secondary DNS service for the following domain(s) Unfortunately, the primary DNS server(s) you specified are not permitting the necessary zone transfers from our servers, or they are not answering "SOA" queries for your domain correctly. I have gone through the support procedure and they weren't that helpful. They have suggested the following: Our secondline team have suggested setting the AXFR to use anouther machine. This will ensure that the transfer is not locked down to one machine and should allow any machine to make the request I don't really know what AFXR is and I only have 1 production machine so I can't set the AFXR to use another one! In previous support correspondence we confirmed that I am allowing transfers to the correct IP and that I have the correct ports open on the firewall. I am running Windows Server 2003. What can I do to try and get these zone transfers working? Thanks

  Read the article

• Windows 7 Slow Searching

  - by Guy Thomas

  I have a new Windows 7 machine with twice as much RAM and a faster processor than my old Windows Server 2008 R2 Machine. I am disappointed that searching amongst my 10,000 image files takes twice as long on my new Windows 7 machine. Both machines have their own copy of these same files. In other respects e.g. opening my huge Outlook files, the new machine is faster. The Windows Search Service has started. And I set indexing on the image folder about 3 days ago. Any ideas why I suffer from this poor index / search experience? Other than adding / removing folders, is there anything I can do to tweak indexing?

  Read the article

• Media Drive Permissions

  - by Wade Wofford

  I just switched from a Hackintosh to Linux, and am trying to make sense of it. On my hackintosh, I partitioned a big drive into 3 parts--1 which holds music, 1 for film/tv, and one for the OS. I installed Ubuntu onto the OS partition, and am now trying to make it so I can write to the media drives. I've searched around and tried several things. I tried gksu nautilus in Terminal, which brought me into root permissions. When I select a folder and try to change permissions, I get "The owner could not be changed...Error setting owner: Read-only file system" Ultimately, I have two specific aims: - I want to make it so I can write to the film/tv drive from the ubuntu machine only - I want to make it so I can write to the music drive from the ubuntu machine, or any other machine on the network (all Macs). That is, I want a single music library (an iTunes file) that will serve all Mac laptops/iPads/iPhones on the network, but which XBMC on the Ubuntu machine can also see / read from. Music will be added to the iTunes library via a single Mac laptop, but all other devices should be able to see the music drive.

  Read the article

• Why are my USB 2.0 devices crashing Windows XP?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

  Read the article

• Start frei für die Exadata Community im neuen Look!

  - by Frank Schneede (Exadata Community)

  Endlich ist es soweit! Pünktlich mit dem Start der DOAG Konferenz 2012, die vom 20.11. - 22.11.2012 in Nürnberg stattfindet, geht die Deutsche Exadata Community in völlig neu gestaltetem Outfit an den Start. Sie werden hier regelmäßig über neue Ankündigungen sowie Tipps und Tricks im Umgang mit Exadata informiert. Durch das freiere Blogformat werden an dieser Stelle auch Berichte über Exadata Projekte erscheinen, die besonders hervorhebenswert sind. Ich denke, Sie dürfen gespannt sein! Vieles hat sich seit dem letzten Update in der Community getan, denn auf der diesjährigen Oracle Open World in San Franzisco wurde eine ganze Reihe spannender Ankündigungen rund um Exadata gemacht. Die kürzlich vorgestellten Modelle Exadata Database Machine X3-2 und X3-8 sind in der grundlegenden Architektur zwar unverändert geblieben, jedoch sind die Modelle mit aktuellen Prozessoren in SandyBridge Mikroprozessorarchitektur noch leistungsfähiger als bisher. Der vierfach vergrößerte Flash Cache nimmt wesentlich mehr Daten auf und macht die Exadata so zur "In-Memory" Database Machine. Mit der neuen Exadata Software 11.2.3.2 kann der Flash Cache nun als persistenter Write Back Flash Cache verwendet werden. Durch das neuartige Caching profitieren auch OLTP Applikationen, die eine hohe Last von schreibenden Transaktionen verursachen, stärker von der Exadata Technologie. Ein neues Einstiegsmodell, das Exadata X3-2 Eighth Rack, vervollständigt die Produktfamilie und senkt abermals die Einstiegshürde für die Kunden.  Die beiden Community Tipps zur Exadata Hardware wurden aktualisiert. Lesen Sie alles über die Exadata Database Machine X3-2 und deren große Schwester, die Exadata Database Machine X3-8.

  Read the article

• Can only access asp.net app on localhost

  - by Kevin Donn

  I'm trying to get an asp.net application up on IIS on a Windows Server 2008 machine. I can hit the app from localhost, no problem. But I can't access the app using the server's domain name either locally or from another machine on the network. But here's the odd part. I can access a normal file on IIS using the domain name, both from a browser running on the server and from a browser running on another machine on the network. Here's a synopsis ("http" converted to "htp" below because I don't have enough points to have all these links in my message): From IE on the server itself: works htp://localhost/foo.htm works htp://localhost/App works htp://test.foo.com/foo.htm dead htp://test.foo.com/App From IE on another machine (inside or outside my subnet): works htp://test.foo.com/foo.htm dead htp://test.foo.com/App And when I say "dead" I mean the request times out. Any ideas?

  Read the article

• I can't get my PC to start up by a normal way.

  - by ssice

  I couldn't write a more accurate title. I am just unable to start the computer by pressing the Power On button. I checked the Power Supply and it seems to give good voltage values in every pin. And this is not a BIOS malfunction because of bad overclocking or anything that may come to your mind. And I will tell you why. It happens that EPS (or any ATX-based) power supply has the ability to be powered-on by the Motherboard by jumping the 13th pin of the 24-pin-ATX-connector to COM/GND. I did it, after pushing the power on button (without any visual response) and, pwhaa! The machine turned on. I was able to read (and even write, if I wanted) BIOS values and then start any OS installed. Machine starts, so it's not any kind of misconfiguration. It seems some hardware related. I am able to power the machine on only if I already pushed the power on button. Though pushing it without jumping the 13th pin to ground for a second does not power the machine. Of course, jumping the pin without pushing the power on button does not tell the motherboard anything, so the computer would not start up either. It's as if the logic that connects the power button with the 13th pin derivation to GND was unable to be activated. What can be the issue? How can I solve it? My configuration is as follows: CPU: AMD Phenom 9850 X4 Black Edition MB: ASUS Formula II AM2 RAM: 2x2GB Corsair Dominator 5-5-5-15 2T @ 1066MHz DDR2 Tested also with only 1 module GPU: 2x XFX nVIDIA GeForce 9600 GT XxX Alpha Dog Edition @ Core: 540Mhz [SLi] Power Supply: Xilence 700W (ATX 12V 2.3 / EPS 12V 2.92 compatible) PS: I know the machine is like 2 years old. I hardly use it now, but my parents do.

  Read the article

< Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >