Search Results

Search found 4824 results on 193 pages for 'sandeep k ram'.

Page 119/193 | < Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >

• BSOD constantly with same ntoskrnl.exe error and disk indicator is frozen

  - by Sheep

  BSOD constantly and the disk indicator is frozen. Error do not happen immediately, usually an hour after boot up. Here is the Minidump: Bug Check Code = 0x00000124 Caused By Driver = ntoskrnl.exe Caused By Address = ntoskrnl.exe+4b094c Crash Address = ntoskrnl.exe+4b094c Seems to be hardware problem, but I checked RAM, no error. I have two HDs installed, system is on SSD, data is on HDD. Checked SSD with the properties-tools-error-checking , no error. Re-installed several times, still happens even after removed HDD. Configuration: SSD: Crucial M4-CT064M4SSD2 with Firmware 0009 Intel HM65 CPU: i7-2630QM The SSD is set correctly, SATA III 6Gb/s enabled, and everything worked perfectly for nearly a year.

  Read the article

• Should server spare parts be stored in climate controlled storage?

  - by Shane Wealti

  What is a best practice for storing server spares (hard drives, RAM, power supplies, etc) with respect to how/where they are stored? Some options are storing them in climate controlled storage or just a standard warehouse-type stockroom? My understanding is that all other things being equal climate-controlled storage is preferred. What are the risks of storing that type of thing in a non-climate-controlled, somewhat dusty shelving area? Conversely are there risks to storing spares in a climate controlled area? If there are space limitations in climate controlled storage are there some parts, such as hard drives, which should be in climate controlled, while other parts such as power supplies will probably be ok in non climate controlled storage?

  Read the article

• Need advice on PC components for high-end games but in limited budget

  - by Md Atif

  I need advise, I want to buy PC components which will be good for gaming as well as be under my budget. First thing I chose is Graphics card : ATI HD 7850 2GB DDR5 then matching things up with this selected following: Processor: AMD 3.5 GHz AM3 FX 8320 8 Core Piledriver Mobo: MSI 990FXA-GD65 RAM : 8GB DDR3 (4x2) Is this setup looks compatible? If making any of above component inferior will have negligible affect on performance/gaming(like buying 970 chip mobo instead of 990) then please let me know so I can save some money :) ? Any other advice?

  Read the article

• Can a 32-bit RHEL4 userland work with a 64-bit kernel?

  - by James

  Is there a way to change an i386 RHEL4 machine to run an amd64 kernel, but ensure that it still builds software into same i386 binaries? On Debian this seems quite straightforward: just install an amd64 kernel (worst case, build one like this guy: http://www.debian-administration.org/users/jonesy/weblog/1) and prefix everything with "linux32". Then everything that considers uname -m will be unchanged, I just need to handle the few cases that consider uname -r. What is the Red Hat equivalent? Is the only way a full 64-bit installation on another disk and then chrooting back to the 32-bit system before anyone builds anything? (Even the best examples of that seem to be Debian-based.) Background: We make a large system that runs on (a variant of) i386 RHEL4. However, some of the larger RHEL build machines now have enough RAM that they might benefit from going 64-bit (for the kernel and maybe some of the bigger build steps). Our build system doesn't support cross-compilation.

  Read the article

• Windows 7 Taskbar disappears overnight

  - by eidylon

  Hello all, I've got this problem that started happening recently. Overnight, something is happening that makes my taskbar disappear on my laptop. The Start orb is still there, and if I click it, it pops up the start menu, but the whole rest of the taskbar, including the background behind the start orb, is just completely vanished: tray icons, running programs, clock, everything. I tried killing explorer.exe and restarting it, but it doesn't restart. And after killing it, Task Manager won't let me start ANY programs. It gives no errors, just ... doesn't run them. Anyone else see this or know what it might be? I'm running Windows 7 RC on an IBM ThinkPad R51 with 2GB ram.

  Read the article

• Dell Studio XPS 16 Runs Hot

  - by dtbarne

  Specs: 1920x1080 i7 1.6 GHz quad core 6GB RAM 1GB ATI Radeon HD 6570M/5700 Series 500GB 7200rpm Hard Drive Love this laptop for many reasons, but it constantly runs hot (CPU is low 70s with basic tasks and often 80+ is not uncommon) and I'm finding it too much to deal with. The laptop feels very hot (almost too hot for a lap) and often gets so hot that the OS slows down or freezes altogether. I've tried cleaning it out and even replacing the thermal paste. I often use an external cooler, but it only helps 3-5 degrees and it's a pain to have to use. I've come to the conclusion that it just runs hot. I have two questions: What is to blame? The i7 processor, the gfx card, or is it just that this laptop has poor cooling? Does the Dell XPS 15 run cooler? I'm looking at replacing my current laptop, but I don't want to run into the same problem.

  Read the article

• Can I upgrade my computer to run SC2 smoothly?

  - by Citizen

  My desktop is: ACPI x86 AMD Athlon x2 Dual Core 3600 1.9ghz 1 gig ram NVIDIA Geforce 7300 I'm running 32 bit windows vista. My budget is ~$250 When I play SC2, its incredibly slow and I have to play with the graphics on the LOWEST settings. What can/should I buy (specifically) to get this to run SC2 smoothly? Are max setting possible? I'm not sure what I can get that will be for sure compatible + will actually do the trick. Or is my computer simply too old?

  Read the article

• Rules to choose hardware for OLTP systems (sql server)

  - by Roman Pokrovskij

  Ok. We know database size, number of concurrent users, number of transactions per minute; should choose number of processors, RAID, RAM, mirroring and clustering. There are no exact rule.. but may be there are no rules at all? In my practice in every case I have "legacy" system, and after some inspections and interview I can form an opinion how hardware and design can be improved. But every time when I meet "absolutely" new system (I guess there are no new systems, but sometimes are such tasks) I can't say anything trustful. So I'm interesting how people deal with such tasks? They map task on theirs experience or have some base formulas?

  Read the article

• Debian Linux server hangs after a week or so

  - by Alex Flo

  I have 2 Debian Linux 6.0.4 servers that have a strange behaviour: after 5-7-10 days they hang. By this I mean the servers need to be restarted and before that ping won't answer. I've been struggling with this problem for a couple of months now and here's some thoughts/what I tried without being able to solve the problem. I changed the RAM on a server. Being 2 different servers I doubt that it could be something related to hardware as a 3rd identical server won't have this problem. I logged the server load and when it crashes the load is fine (quite low) I cannot find anything in the server logs, logs are fine till the server freezes. I don't have access to console unfortunately. While I have years of admin experience I have never encountered such an issue and right now I have no idea where else to investigate. If you have an idea of what I could try in order to fix the problem please share it with me:-)

  Read the article

• EEE PC 701/4G Surf Internal Drive: Is it really SSD?

  - by Bart Silverstrim

  I have an old EEE PC with the 4 Gig internal drive. Everything I've read keeps saying it's an SSD drive; running lshw tells me that it's an ATA disk, Silicon Motion SM. The thing seems to be rather slow, though. I know it has a 900 Mhz Celeron processor and only 512 meg of RAM, but it seems like drive access is slow even for those specs. Does anyone know if it really has an SSD drive? I thought that compared to regular hard disks SSD's were blazing fast, and this feels like and acts like it's pulling from something more akin to an internal USB memory stick.

  Read the article

• BSOD when playing Portal 2 using ATI Radeon 4800 on H61M/U3S3 mobo

  - by Ben Walker

  playing Portal 2 will always give me blue screen of death, usually after about 10 minutes of playing. BSOD references atikmpag.sys. I have tried several updates for graphics driver and through ATI Catalyst Center. I have updated the motherboard BIOS. My RAM is OK. Nothing changes. I had previously run the game fine, then I removed my video card to use on-board graphics once, and after re-installing the video card, I get this problem every time. I am using: ATI Radeon 4800 ASRockH61M/U3S3 motherboard Windows 7 64-bit

  Read the article

• What causes Windows Boot to stall?

  - by Nick Berardi

  For about 6 months now I have been having this weird problem where Windows 7 fails to fully boot correctly. What happens is this. Starting Windows shows up on the screen. Then 3 out of 4 times nothing else happens, no Windows Flag animation, just nothing occurs. After 3 or 4 restarts repeating steps 1-2 above, the Windows Flag animation finally shows up and everything works as expected. My question is what is causing this problem in steps 1 and 2? Because I have tried the following with no luck: Error checking and correcting of any disk errors Updating drivers Doing a clean install of Windows 7 My setup is as follows: Windows 7 64-bit Ultimate 8 GB RAM 128 GB Crucial SSD (firmware 0005) Dell Latitude E6410 Intel Wireless and Graphics Other than what I have tried above I am totally out of ideas and looking for some new ones to try.

  Read the article

• Clear / Flush cached memory

  - by TheDave

  I have a small VPS with 6GB RAM hosting a couple of websites. Recently I have noticed that my cached memory size is quite high - see below: Cpu(s): 0.1%us, 0.1%sy, 0.0%ni, 99.1%id, 0.0%wa, 0.2%hi, 0.4%si, 0.0%st Mem: 6113256k total, 5949620k used, 163636k free, 398584k buffers Swap: 1048564k total, 104k used, 1048460k free, 3586468k cached After investigating if there is some method to have this flushed or cleared I stumbled upon a command which is: sync; echo 3 > /proc/sys/vm/drop_caches I read it could be useful to add this to a chron-task/job. Is this method recommended or could this lead to potential problems? The only concern I have is that I use one Magento installation on Memcached - could this have any negative effects on it? I am certainly not a pro therefore I would very much appreciate some expert advise. PS: My VPS runs on CentOS 5 x64 and I have WHM + NGINX installed.

  Read the article

• Windows 7 as VM inside VMWare Fusion - 32 or 64 bit?

  - by webworm

  I have a MacBook Pro with the 2.4 Core 2 Duo and 4 GB RAM. I want to run Windows 7 for ASP.NET development within VMWare Fusion. Since I may be doing some SharePoint 2010 work I was thinking that my install of Windows 7 would need to be the 64 bit version because SharePoint 2010 requires 64 bit Windows. As I am new to Mac OS (I am running v10.6.3) I am not sure if it would support a 64 bit OS in a Virtual Machine. Thoughts?

  Read the article

• ASUS K55VM Laptop unexpectedly shuts down

  - by Abhishek Sha

  I've read quite a few questions on SuperUser of people having laptop shutdown problems but mine is different. My laptop specs: Intel Core i7 3610QM (IvyBridge) NVIDIA GT630M 2GB and Intel GMA4000 8GB RAM Windows 7 64 Bit My laptop occasionally shuts down when playing FarCry 3. It's around 5 months old. I've played games like Crysis and it never shuts down unexpectedly. Since I experienced this shut down recently, I decided for GPU-Z to log the temperatures. The final log value at the time of shutdown were thus: GPU Core Clock [MHz] - 797.3 GPU Memory Clock [MHz] - 896.8 GPU Temperature [°C] - 89.0 GPU Load [%] - 99 Memory Controller Load [%] - 36 Video Engine Load [%] - 0 Memory Usage (Dedicated) [MB] - 535 Memory Usage (Dynamic) [MB] - 53 VDDC [V] - 1.0620 My drivers are up-to-date and I didn't encounter any BSODs at the time of shut down. It simply turns off.

  Read the article

• What can cause peaks in pagetables in /proc/meminfo ?

  - by Fuzzy76

  I have a gameserver running Debian Lenny on a VPS host. Even when experiencing a fairly low load, the players start experiencing major lag (ping times rise from 50 ms to 150-500 ms) in bursts of 3 - 10 seconds. I have installed Munin server monitoring, but when looking at the graphs it looks like the server has plenty of CPU, RAM and bandwidth available. The only weird thing I noticed is some peaks in the memory graph attributed to "page_tables" which maps to PageTables in /proc/meminfo but I can't find any good information on what this might mean. Any ideas what might be causing this? If you need any more graps, just let me know. The interrupts/second count is at roughly 400-600 during this period (nearly all from eth0). The drop in committed was caused by me trying to lower the allocated memory for the server from 512MB to 256MB, but that didn't seem to help.

  Read the article

• SQL 2008 Memory Usage

  - by Danilo Brambilla

  I have a SQL Server 2008 (ver 10.0.1600) running on a Windows Server 2008 R2 Enterprise server with 8 GB of physical ram. If I open Task Manager I can see on 'Physical Memory' section of 'Performance' tab that only 340 MB are Available of 8191 Total, but I can't see any process using such amount of memory. Please note SQL Server is memory limited to 6GB (Maximum Server Memory = 6000). If I open Sysinternals Process Explorer, I can see sqlsrvr.exe process has: Private Bytes: 227.000 K Working Set: 140.000 K Virtual Size: 8.762.000 K What does this means? Is there any way to free up this memory for other process? Why Virtual Size figure as allocated memory? I thought that Virtual Size was 'reserved memory' only.

  Read the article

• Ubuntu 12.04 blank screen after login

  - by kgthenerd

  I just installed Ubuntu 12.04 LTS 64 bit on a machine, everything went well accordingly but after login it just gives me a blank screen. During startup after BIOS message it shows "Out of range" error and comes to login window after logon it's just a blank screen. even after somehow it comes to an empty desktop screen i dont see the Unity bar or anything like that (Can change wallpaper, and system setting though). And can't goto Console mode by pressing Ctrl+Alt+F1 - it returns "Out of range" error. System is new AMD Sempron with 2 Gigs of RAM has NVIDIA GeForce 6150SE-based graphic chipset. any ideas on this?

  Read the article

• Windows 7 has trouble installing software with Visual C++ 2005 & 2008

  - by John Fitzgerald

  I have been reinstalling Windows 7 over and over again on an ASUS P5lD2 2Gb Ram 3Ghz P4 because it ultimately loses the contents of "Turn Windows Features On or Off" after I install software like Autocad 2010 & Microsoft Office 2007. I get install errors like 1935 and 1704 on the way tried different fixes at different times (install software in different order to try and isolate problem too). Ultimately I force the software to install after much buggering and end up losing the contents of "TWFOOO" Should I be installing some older items like .net framework 1.1, 2.0 and Visual Studio items like vcredist_x86.exe? getting a bit lost because of compounded problems...

  Read the article

• Linux only recognizes 800Mhz from 2Ghz

  - by Leo

  I tried with Suse 11 (KDE), Xubuntu 11.10 and Lubuntu 11.10 and these systems only recognizes 800Mhz from my processor of 2Ghz! The utilities I used are: linuxinfo, sysinfo, "system profiler and benchmark". And all of this only shows 800Mhz My system specs are: AMD Turion 64 Mobile MK36 512 RAM nVidia Geforce Go 6150 (I also tried with nVidia restricted drivers) 120GB Hard drive The weirdest thing is that Windows XP and 7 recognize the 2Ghz of my processor, What can I do? p.s. (It is not just the value of 800Mhz, I also feel my system very slow with linux)

  Read the article

• Weird problem, special characters after formatting the hard drive, computer not starting 0_o

  - by m3taspl0it

  Hya friends , Last night my computer was working fine. But today when i came back from college and started it , it was starting fine but after sometime it's getting restarted , again and again getting restarted at different points , so i tried to boot it in safe mode but same problem. Now after all this , i finally decided to format the drive C (it is in 80 GB) and load new OS windows XP3. After formatting and loading xp3 sufficient files , when it was getting rebooted for copying the actual os files , it hung and a weird screen came. I've also attached the pic of error : http://www.postimage.org/image.php?v=gxz1vKS My specs : P4 3.0 Ghz 2 GB RAM (2x 512 mb and 1 GB) 3 hard drives { 80 GB (5 years old around) 320 GB ( 2 years old around) 500 GB ( recently bought) 256 MB graphics card any help is very appreciated , thanks

  Read the article

• Script errors when run by launchd at startup, but not when run in Terminal

  - by Mechcozmo

  I'm attempting to create a RAM disk that loads the previous contents when the system starts up, and every six hours writes the contents to a disk image. Currently, when you run the script from the terminal ("sudo bash LogToRAM.sh") everything works fine. But when run from launchd during startup, it doesn't work. Here's the lines from the log; the first line just gives some idea as to where in the boot process we are: SecurityAgent[202] Showing Login Window com.mechcozmo.LogToRAM[51] + /Developer/usr/bin/SetFile -a V /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] ERROR: File Not Found. (-43) on file: /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] + /usr/sbin/asr -source '/Library/Application Support/LogToRAM/RAMdisk_store.dmg' -target /Volumes/LogfileRAMdisk/ -noverify Here is the script and plist file in question. Note that 'set -vx' is up at the top of the script; it give a lot of information about what is happening in the script. My current theory is that the /Volumes directory does not exist at this stage of the boot process, but that seems unlikely to be honest.

  Read the article

• Older raid controllers in raid 5 vs. Jbod and SW raid

  - by TEB

  Hi. Im in the fortunate position to have 6 Supermicro older VOD servers with the following config: Supermicro 3U case, 3xPSU Dual Xeon 3ghz P4 class cpu (5 years old.. havnt checked the exact type) 4GB Ram 3ware 9500-8 SATA controller 8 SATA SLOTS and alot of free drives. 2GB FLASH Bootdrive What im curious about is the RAID5 performance on these old beasts in HW mode vs. SW on Linux with the controller set in JBOD mode. Im thinking on using Centos 5.5 or Ubuntu or ZFS RaidZ on Opensolaris. Any tips? or reccomendations ? best regards TEB

  Read the article

• p7h55-m/usb3 blue screen ?

  - by winterwindz

  hi im not sure if this is the right place to ask but, i just build a new desktop for gaming. i3 530 2.93 GHz P7H55-M/USB3 Corsair Vengeance 4GB 1600MHz iGame Gtx 460 Win 7 32bit Huntkey X7 900W Everytime i start the computer it would run normally until the windows loading and will just stuck and hit the blue screen.i tried everypossible way to repair,restore the windows but nutin seems to be working. I'm not sure if its compatibility problem or Bios or even Ram,since the beep is a normal beep and will only blue screen when loading the windows. if anyone can help me id appriciate it. thx

  Read the article

• New Session Failed

  - by PhilPursglove

  We've started to see instances on our Intranet server where for any page the server just responds with the error page 'HTTP/1.1 New Session Failed'. It seems we can fix it by running IISRESET but this feels like we're only treating the symptom. The server is a virtualised server running IIS6 on Windows Server 2003 with 0.5Gb of RAM. Our Intranet is written in ASP, but we also have ASP.NET 2.0 applications running on the web site. The site is set up for Anonymous and Integrated Authentication. What causes IIS to get into this error state? Could the server be saturated with requests i.e. we need to scale out and move some applications onto another server? I've seen KB210842 but I'm not sure it applies as that is applicable to IIS 4

  Read the article

< Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >