Search Results

Search found 301 results on 13 pages for 'credential'.

Page 12/13 | < Previous Page | 8 9 10 11 12 13  | Next Page >

• Cannot read status the monit daemon, even with allowed group

  - by jefflunt

  I cannot seem to get monit status or other CLI commands to work. I've built monit v5.8 to run on a Raspberry Pi. I'm able to add services to be monitored, and the web interface can be accessed just fine, as I've set it up for public read-only access (it's a test server, not my final production setup, so not a big deal right now). Problem is, when I run monit status while logged in as root I get: # monit status monit: cannot read status from the monit daemon I also have monit started on boot via this /etc/inittab file entry: mo:2345:respawn:/usr/local/bin/monit -Ic /etc/monitrc I've verified that monit is running, and I'm getting email alerts anytime I either kill the monit process manually, or reboot my raspberry pi. So, next I check my monitrc file permissions to see which group is allowed access. # ls -al /etc/monitrc -rw------- 1 root root 2359 Aug 24 14:48 /etc/monitrc Here's my relevant allow section of the control file. set httpd port 80 allow [omitted] readonly allow @root allow localhost allow 0.0.0.0/0.0.0.0 Also tried setting permissions on this file to 640 to allow group read permissions, but no matter what I try I either get the same error as noted above, or when the permissions are set to 640 I get: # monit status monit: The control file '/etc/monitrc' must have permissions no more than -rwx------ (0700); right now permissions are -rw-r----- (0640). What am I missing here? I know that the httpd must be enabled, as that's the interface that the CLI uses to get information (or so I've read), so I've done that. And in terms of monit doing its monitoring job and sending email alerts, that's all working as well. Here's my entire monitrc file - again, this is version v5.8, and it was build with both PAM and SSL support. The process runs under the root user: # Global settings set daemon 300 with start delay 5 set logfile /var/log/monit.log set pidfile /var/run/monit.pid set idfile /var/run/.monit.id set statefile /var/run/.monit.state # Mail alerts ## Set the list of mail servers for alert delivery. Multiple servers may be ## specified using a comma separator. If the first mail server fails, Monit # will use the second mail server in the list and so on. By default Monit uses # port 25 - it is possible to override this with the PORT option. # set mailserver smtp.gmail.com port 587 username [omitted] password [omitted] using tlsv1 ## Send status and events to M/Monit (for more informations about M/Monit ## see http://mmonit.com/). By default Monit registers credentials with ## M/Monit so M/Monit can smoothly communicate back to Monit and you don't ## have to register Monit credentials manually in M/Monit. It is possible to ## disable credential registration using the commented out option below. ## Though, if safety is a concern we recommend instead using https when ## communicating with M/Monit and send credentials encrypted. # # set mmonit http://monit:[email protected]:8080/collector # # and register without credentials # Don't register credentials # # ## Monit by default uses the following format for alerts if the the mail-format ## statement is missing:: set mail-format { from: [email protected] subject: $SERVICE $DESCRIPTION message: $EVENT Service: $SERVICE Date: $DATE Action: $ACTION Host: $HOST Description: $DESCRIPTION Monit instance provided by chicagomeshnet.com } # Web status page set httpd port 80 allow [omitted] readonly allow @root allow localhost allow 0.0.0.0/0.0.0.0 ## You can set alert recipients whom will receive alerts if/when a ## service defined in this file has errors. Alerts may be restricted on ## events by using a filter as in the second example below.

  Read the article

• SQL Azure Reporting Limited CTP Arrived

  - by Shaun

  It’s about 3 months later when I registered the SQL Azure Reporting CTP on the Microsoft Connect after TechED 2010 China. Today when I checked my mailbox I found that the SQL Azure team had just accepted my request and sent the activation code over to me. So let’s have a look on the new SQL Azure Reporting.   Concept The SQL Azure Reporting provides cloud-based reporting as a service, built on SQL Server Reporting Services and SQL Azure technologies. Cloud-based reporting solutions such as SQL Azure Reporting provide many benefits, including rapid provisioning, cost-effective scalability, high availability, and reduced management overhead for report servers; and secure access, viewing, and management of reports. By using the SQL Azure Reporting service, we can do: Embed the Visual Studio Report Viewer ADO.NET Ajax control or Windows Form control to view the reports deployed on SQL Azure Reporting Service in our web or desktop application. Leverage the SQL Azure Reporting SOAP API to manage and retrieve the report content from any kinds of application. Use the SQL Azure Reporting Service Portal to navigate and view the reports deployed on the cloud. Since the SQL Azure Reporting was built based on the SQL Server 2008 R2 Reporting Service, we can use any tools we are familiar with, such as the SQL Server Integration Studio, Visual Studio Report Viewer. The SQL Azure Reporting Service runs as a remote SQL Server Reporting Service just on the cloud rather than on a server besides us.   Establish a New SQL Azure Reporting Let’s move to the windows azure deveploer portal and click the Reporting item from the left side navigation bar. If you don’t have the activation code you can click the Sign Up button to send a requirement to the Microsoft Connect. Since I already recieved the received code mail I clicked the Provision button. Then after agree the terms of the service I will select the subscription for where my SQL Azure Reporting CTP should be provisioned. In this case I selected my free Windows Azure Pass subscription. Then the final step, paste the activation code and enter the password of our SQL Azure Reporting Service. The user name of the SQL Azure Reporting will be generated by SQL Azure automatically. After a while the new SQL Azure Reporting Server will be shown on our developer portal. The Reporting Service URL and the user name will be shown as well. We can reset the password from the toolbar button.   Deploy Report to SQL Azure Reporting If you are familiar with SQL Server Reporting Service you will find this part will be very similar with what you know and what you did before. Firstly we open the SQL Server Business Intelligence Development Studio and create a new Report Server Project. Then we will create a shared data source where the report data will be retrieved from. This data source can be SQL Azure but we can use local SQL Server or other database if it opens the port up. In this case we use a SQL Azure database located in the same data center of our reporting service. In the Credentials tab page we entered the user name and password to this SQL Azure database. The SQL Azure Reporting CTP only available at the North US Data Center now so that the related SQL Server and hosted service might be better to select the same data center to avoid the external data transfer fee. Then we create a very simple report, just retrieve all records from a table named Members and have a table in the report to list them. In the data source selection step we choose the shared data source we created before, then enter the T-SQL to select all records from the Member table, then put all fields into the table columns. The report will be like this as following In order to deploy the report onto the SQL Azure Reporting Service we need to update the project property. Right click the project node from the solution explorer and select the property item. In the Target Server URL item we will specify the reporting server URL of our SQL Azure Reporting. We can go back to the developer portal and select the reporting node from the left side, then copy the Web Service URL and paste here. But notice that we need to append “/reportserver” after pasted. Then just click the Deploy menu item in the context menu of the project, the Visual Studio will compile the report and then upload to the reporting service accordingly. In this step we will be prompted to input the user name and password of our SQL Azure Reporting Service. We can get the user name from the developer portal, just next to the Web Service URL in the SQL Azure Reporting page. And the password is the one we specified when created the reporting service. After about one minute the report will be deployed succeed.   View the Report in Browser SQL Azure Reporting allows us to view the reports which deployed on the cloud from a standard browser. We copied the Web Service URL from the reporting service main page and appended “/reportserver” in HTTPS protocol then we will have the SQL Azure Reporting Service login page. After entered the user name and password of the SQL Azure Reporting Service we can see the directories and reports listed. Click the report will launch the Report Viewer to render the report.   View Report in a Web Role with the Report Viewer The ASP.NET and Windows Form Report Viewer works well with the SQL Azure Reporting Service as well. We can create a ASP.NET Web Role and added the Report Viewer control in the default page. What we need to change to the report viewer are Change the Processing Mode to Remote. Specify the Report Server URL under the Server Remote category to the URL of the SQL Azure Reporting Web Service URL with “/reportserver” appended. Specify the Report Path to the report which we want to display. The report name should NOT include the extension name. For example my report was in the SqlAzureReportingTest project and named MemberList.rdl then the report path should be /SqlAzureReportingTest/MemberList. And the next one is to specify the SQL Azure Reporting Credentials. We can use the following class to wrap the report server credential. 1: private class ReportServerCredentials : IReportServerCredentials 2: { 3: private string _userName; 4: private string _password; 5: private string _domain; 6:  7: public ReportServerCredentials(string userName, string password, string domain) 8: { 9: _userName = userName; 10: _password = password; 11: _domain = domain; 12: } 13:  14: public WindowsIdentity ImpersonationUser 15: { 16: get 17: { 18: return null; 19: } 20: } 21:  22: public ICredentials NetworkCredentials 23: { 24: get 25: { 26: return null; 27: } 28: } 29:  30: public bool GetFormsCredentials(out Cookie authCookie, out string user, out string password, out string authority) 31: { 32: authCookie = null; 33: user = _userName; 34: password = _password; 35: authority = _domain; 36: return true; 37: } 38: } And then in the Page_Load method, pass it to the report viewer. 1: protected void Page_Load(object sender, EventArgs e) 2: { 3: ReportViewer1.ServerReport.ReportServerCredentials = new ReportServerCredentials( 4: "<user name>", 5: "<password>", 6: "<sql azure reporting web service url>"); 7: } Finally deploy it to Windows Azure and enjoy the report.   Summary In this post I introduced the SQL Azure Reporting CTP which had just available. Likes other features in Windows Azure, the SQL Azure Reporting is very similar with the SQL Server Reporting. As you can see in this post we can use the existing and familiar tools to build and deploy the reports and display them on a website. But the SQL Azure Reporting is just in the CTP stage which means It is free. There’s no support for it. Only available at the North US Data Center. You can get more information about the SQL Azure Reporting CTP from the links following SQL Azure Reporting Limited CTP at MSDN SQL Azure Reporting Samples at TechNet Wiki You can download the solutions and the projects used in this post here.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Remote Desktop to Your Azure Virtual Machine

  - by Shaun

  The Windows Azure Team had just published their new development portal this week and the SDK 1.3. Within this new release there are a lot of cool feature available. The one I’m looking forward to is Remote Desktop Access to your running Windows Azure Virtual Machine.   Configuration Remote Desktop Access It would be very simple to make the azure service enable the remote desktop access. First of all let’s create a new windows azure project from the Visual Studio. In this example I just created a normal MVC 2 web role without any modifications. Then we right-click the azure project node in the solution explorer window and select “Publish”. Then let’s select the “Deploy your Windows Azure project to Windows Azure” on the top radio button. And then select the credential, deployment service/slot, storage and label as susal. You must have the Management API Certificates uploaded to your Windows Azure account, and install the certification on you machine before in order to use this one-click deployment feature. If you are familiar with this dialog you will notice that there’s a linkage named “Configure Remote Desktop connections”. Here is where you need to make this service enable the remote desktop feature. After clicked this link we will set the configuration of the remote desktop access authorization information. There are 4 steps we need to do to configure our access. Certificates: We need either create or select a certificate file in order to encypt the access cerdenticals. In this example I will use the certificate file for my Management API. Username: The remote desktop user name to access the virtual machine. Password: The password for the access. Expiration: The access cerdentals would be expired after 1 month by default but we can amend here. After that we clicked the OK button to back to the publish dialog.   The next step is to back to the new windows azure portal and navigate to the hosted services list. I created a new hosted service and upload the certificate file onto this service. The user name and password access to the azure machine must be encrypted from the local machine, and then send to the windows azure platform, then decrypted on the azure side by the same file. This is why we need to upload the certificate file onto azure. We navigated to the “Hosted Services, Storage Accounts & CDN"” from the left panel and created a new hosted service named “SDK13” and selected the “Certificates” node. Then we clicked the “Add Certificates” button. Then we select the local certificate file and the password to install it into this azure service.   The final step would be back to our Visual Studio and in the pulish dialog just click the OK button. The Visual Studio will upload our package and the configuration into our service with the remote desktop settings.   Remote Desktop Access to Azure Virtual Machine All things had been done, let’s have a look back on the Windows Azure Development Portal. If I selected the web role that I had just published we can see on the toolbar there’s a section named “Remote Access”. In this section the Enable checkbox had been checked which means this role has the Remote Desktop Access feature enabled. If we want to modify the access cerdentals we can simply click the Configure button. Then we can update the user name, password, certificates and the expiration date.   Let’s select the instance node under the web role. In this case I just created one instance for demo. We can see that when we selected the instance node, the Connect button turned enabled. After clicked this button there will be a RDP file downloaded. This is a Remote Desctop configuration file that we can use to access to our azure virtual machine. Let’s download it to our local machine and execute. We input the user name and password we specified when we published our application to azure and then click OK. There might be some certificates warning dislog appeared. This is because the certificates we use to encryption is not signed by a trusted provider. Just select OK in these cases as we know the certificate is safty to us. Finally, the virtual machine of Windows Azure appeared.   A Quick Look into the Azure Virtual Machine Let’s just have a very quick look into our virtual machine. There are 3 disks available for us: C, D and E. Disk C: Store the local resource, diagnosis information, etc. Disk D: System disk which contains the OS, IIS, .NET Frameworks, etc. Disk E: Sotre our application code. The IIS which hosting our webiste on Azure. The IP configuration of the azure virtual machine.   Summary In this post I covered one of the new feature of the Azure SDK 1.3 – Remote Desktop Access. We can set the access per service and all of the instances of this service could be accessed through the remote desktop tool. With this feature we can deep into the virtual machines of our instances to see the inner information such as the system event, IIS log, system information, etc. But we should pay attention to modify the system settings. 2 reasons from what I know for now: 1. If we have more than one instances against our service we should ensure that all system settings we modifed are applied to all instances/virtual machines. Otherwise, as the machines are under the azure load balance proxy our application process may doesn’t work due to the defferent settings between the instances. 2. When the virtual machine encounted some problem and need to be translated to another physical machine all settings we made would be disappeared.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Automating Form Login

  - by Greg_Gutkin

  Introduction A common task in configuring a web application for proxying in Pagelet Producer is setting up form autologin. PP provides a wizard-like tool for detecting the login form fields, but this is usually only the first step in configuring this feature. If the generated configuration doesn't seem to work, some additional manual modifications will be needed to complete the setup. This article will try to guide you through this process while steering you away from common pitfalls. For the purposes of this article, let's assume the following characteristics about your environment: Web Application Base URL: http://host/app (configured as Resource Source URL in PP) Pagelet Producer Base URL: http://pp/pagelets Form Field Auto-Detection Form Autologin is configured in the PP Admin UI under resource_name/Autologin/Form Login. First, you'll enter the URL to the login form under "Login Form Identification". This will enable the admin wizard to connect to and display the login page. Caution: RedirectsMake sure the entered URL matches what you see in the browser's address bar, when the application login page is displayed. For example, even though you may be able to reach the login page by simply typing http://host/app, the URL you end up on may change to http://host/app/login via browser redirect(s).The second URL is the one you will want to use. Caution: External Login ServersThe login page may actually come from a different server than the application you are trying to proxy. For example, you may notice that the login page URL changes to http://hostB/appB. This is common when external SSO products are involved. There are two ways of dealing with this situation. One is to configure Pagelet Producer to participate in SSO. This approach is out of scope of this article and is discussed in a separate whitepaper (TODO add link). The second approach is to use the autologin feature to provide stored credentials to the SSO login form. Since the login form URL is not an extension of the application base URL (PP resource URL), you will need to add a new PP resource for the SSO server and configure the login form on that resource instead of the original application resource. One side benefit of this additional resource is that it can reused for other applications relying on the same SSO server for login. After entering the login page URL (make sure dropdown says "URL"), click "Automatically Detect Form Fields". This will bring up the web app's login page in a new browser window. Fill it out and submit it as you would normally. If everything goes right, Pagelet Producer will intercept the submitted values and fill out all the needed configuration data in the Admin UI. If the login form window doesn't close or configuration data doesn't get filled in, you may have not entered the login page URL correctly. Review the two cautionary notes above and make any necessary changes. If the form fields got filled automatically, it's time to save the configuration and test it out. If you can access a protected area of the backend application via a proxied PP URL without filling out its login form, then you are pretty much done with login form configuration. The only other step you will need to complete before declaring this aspect of configuration production ready is configuring form field source. You may skip to that section below. Manual Login Form Identification Let's take a closer look at Login Form Identification. This determines how Pagelet Producer recognizes login forms as such. URL The most efficient way of detecting login forms is by looking at the page URL. This method can only be used under the following conditions: Login page URL must be different from the post login application URLs. Login page URL must stay constant regardless of the path it takes to reach the page. For example, reaching the login page by going to the application base URL or to a specific protected URL must result in a redirect to the same login page URL (query string excluded). If only the query string parameters change, just leave out the query string from the configured login page URL. If either of these conditions is not fullfilled, you must switch to the RegEx approach below. RegEx If the login page URL is not uniform enough across all scenarios or is indistinguishable from other page locations, PP can be configured to recognize it by looking at the page markup itself. This is accomplished by changing the dropdown to "RegEx". If regular expressions scare you, take comfort from the fact that in most cases you won't need to enter any special regex characters. Let's look at an example: Say you have a login form that looks like <form id='loginForm' action='login?from=pageA' > <input id='user'> <input id='pass'> </form> Since this form has an id attribute, you can be reasonably sure that this login form can be uniquely identified across the web application by this snippet: "id='loginForm'". (Unless, of course your backend web application contains login forms to other apps). Since no wildcards are needed to find this snippet, you can just enter it as is into the RegEx field - no special regular expression characters needed! If the web developer who created the form wasn't kind enough to provide a unique id, you will need to look for other snippets of the page to uniquely identify it. It could be the action URL, an input field id, or some other markup fragment. You should abstain from using UI text as an identifier it may change in translated versions of the page and prevent the login page logic from working for international users. You may need to turn to regular expression wildcard syntax if no simple matches work. For more information on regular expression, refer to the Resources section. Form Submit Location Now we'll look at the form submit location. If the captured URL contains query string parameters that will likely change from one form submission to the next, you will need to change its type to RegEx. This type will tell Pagelet Producer to parse the login page for the action URL and submit to the value found. The regular expression needs to point at the actual action URL with its first grouping expression. Taking the example form definition above, the form submit location regex would be: action='(.*?)' The parentheses are used to identify the actual action URL, while the rest of the expression provides the context for finding it. Expression .*? is a so-called reluctant wildcard that matches any character excluding the single quote that follows. See Resources section below for further information on regular expressions. Manual Form Field Detection If the Admin UI form field detection wizard fails to populate login form configuration page, you will have to enter the fields by hand. Use a built-in browser developer tool or addon (e.g. Firebug) to inspect the form element and its children input elements. For each input element (including hidden elements), create an entry under Form Fields. Change its Source according to the next section. Form Field Source Change the source of any of the fields not exposed to the users of the login form (i.e. hidden fields) to "Generated". This means Pagelet Producer will just use the values returned by the web app rather than supplying values it stored. For fields that contain sensitive data or vary from user to user (e.g. username & password), change the source to User (Credential) Vault. Logging Support To help you troubleshoot you autologin configuration, PP provides some useful logging support. To turn on detailed logging for the autologin feature, navigate to Settings in Admin UI. Under Logging, change the log level for AutoLogin to Finest. Known Limitations Autologin feature may not work as expected if login form fields (not just the values, but the DOM elements themselves) are generated dynamically by client side JavaScript. Resources RegEx RegEx Reference from Java RegEx Test Tool

  Read the article

• LLBLGen Pro v3.1 released!

  - by FransBouma

  Yesterday we released LLBLGen Pro v3.1! Version 3.1 comes with new features and enhancements, which I'll describe briefly below. v3.1 is a free upgrade for v3.x licensees. What's new / changed? Designer Extensible Import system. An extensible import system has been added to the designer to import project data from external sources. Importers are plug-ins which import project meta-data (like entity definitions, mappings and relational model data) from an external source into the loaded project. In v3.1, an importer plug-in for importing project elements from existing LLBLGen Pro v3.x project files has been included. You can use this importer to create source projects from which you import parts of models to build your actual project with. Model-only relationships. In v3.1, relationships of the type 1:1, m:1 and 1:n can be marked as model-only. A model-only relationship isn't required to have a backing foreign key constraint in the relational model data. They're ideal for projects which have to work with relational databases where changes can't always be made or some relationships can't be added to (e.g. the ones which are important for the entity model, but are not allowed to be added to the relational model for some reason). Custom field ordering. Although fields in an entity definition don't really have an ordering, it can be important for some situations to have the entity fields in a given order, e.g. when you use compound primary keys. Field ordering can be defined using a pop-up dialog which can be opened through various ways, e.g. inside the project explorer, model view and entity editor. It can also be set automatically during refreshes based on new settings. Command line relational model data refresher tool, CliRefresher.exe. The command line refresh tool shipped with v2.6 is now available for v3.1 as well Navigation enhancements in various designer elements. It's now easier to find elements like entities, typed views etc. in the project explorer from editors, to navigate to related entities in the project explorer by right clicking a relationship, navigate to the super-type in the project explorer when right-clicking an entity and navigate to the sub-type in the project explorer when right-clicking a sub-type node in the project explorer. Minor visual enhancements / tweaks LLBLGen Pro Runtime Framework Entity creation is now up to 30% faster and takes 5% less memory. Creating an entity object has been optimized further by tweaks inside the framework to make instantiating an entity object up to 30% faster. It now also takes up to 5% less memory than in v3.0 Prefetch Path node merging is now up to 20-25% faster. Setting entity references required the creation of a new relationship object. As this relationship object is always used internally it could be cached (as it's used for syncing only). This increases performance by 20-25% in the merging functionality. Entity fetches are now up to 20% faster. A large number of tweaks have been applied to make entity fetches up to 20% faster than in v3.0. Full WCF RIA support. It's now possible to use your LLBLGen Pro runtime framework powered domain layer in a WCF RIA application using the VS.NET tools for WCF RIA services. WCF RIA services is a Microsoft technology for .NET 4 and typically used within silverlight applications. SQL Server DQE compatibility level is now per instance. (Usable in Adapter). It's now possible to set the compatibility level of the SQL Server Dynamic Query Engine (DQE) per instance of the DQE instead of the global setting it was before. The global setting is still available and is used as the default value for the compatibility level per-instance. You can use this to switch between CE Desktop and normal SQL Server compatibility per DataAccessAdapter instance. Support for COUNT_BIG aggregate function (SQL Server specific). The aggregate function COUNT_BIG has been added to the list of available aggregate functions to be used in the framework. Minor changes / tweaks I'm especially pleased with the import system, as that makes working with entity models a lot easier. The import system lets you import from another LLBLGen Pro v3 project any entity definition, mapping and / or meta-data like table definitions. This way you can build repository projects where you store model fragments, e.g. the building blocks for a customer-order system, a user credential model etc., any model you can think of. In most projects, you'll recognize that some parts of your new model look familiar. In these cases it would have been easier if you would have been able to import these parts from projects you had pre-created. With LLBLGen Pro v3.1 you can. For example, say you have an Oracle schema called CRM which contains the bread 'n' butter customer-order-product kind of model. You create an entity model from that schema and save it in a project file. Now you start working on another project for another customer and you have to use SQL Server. You also start using model-first development, so develop the entity model from scratch as there's no existing database. As this customer also requires some CRM like entity model, you import the entities from your saved Oracle project into this new SQL Server targeting project. Because you don't work with Oracle this time, you don't import the relational meta-data, just the entities, their relationships and possibly their inheritance hierarchies, if any. As they're now entities in your project you can change them a bit to match the new customer's requirements. This can save you a lot of time, because you can re-use pre-fab model fragments for new projects. In the example above there are no tables yet (as you work model first) so using the forward mapping capabilities of LLBLGen Pro v3 creates the tables, PK constraints, Unique Constraints and FK constraints for you. This way you can build a nice repository of model fragments which you can re-use in new projects.

  Read the article

• Integration Patterns with Azure Service Bus Relay, Part 1: Exposing the on-premise service

  - by Elton Stoneman

  We're in the process of delivering an enabling project to expose on-premise WCF services securely to Internet consumers. The Azure Service Bus Relay is doing the clever stuff, we register our on-premise service with Azure, consumers call into our .servicebus.windows.net namespace, and their requests are relayed and serviced on-premise. In theory it's all wonderfully simple; by using the relay we get lots of protocol options, free HTTPS and load balancing, and by integrating to ACS we get plenty of security options. Part of our delivery is a suite of sample consumers for the service - .NET, jQuery, PHP - and this set of posts will cover setting up the service and the consumers. Part 1: Exposing the on-premise service In theory, this is ultra-straightforward. In practice, and on a dev laptop it is - but in a corporate network with firewalls and proxies, it isn't, so we'll walkthrough some of the pitfalls. Note that I'm using the "old" Azure portal which will soon be out of date, but the new shiny portal should have the same steps available and be easier to use. We start with a simple WCF service which takes a string as input, reverses the string and returns it. The Part 1 version of the code is on GitHub here: on GitHub here: IPASBR Part 1. Configuring Azure Service Bus Start by logging into the Azure portal and registering a Service Bus namespace which will be our endpoint in the cloud. Give it a globally unique name, set it up somewhere near you (if you’re in Europe, remember Europe (North) is Ireland, and Europe (West) is the Netherlands), and  enable ACS integration by ticking "Access Control" as a service: Authenticating and authorizing to ACS When we try to register our on-premise service as a listener for the Service Bus endpoint, we need to supply credentials, which means only trusted service providers can act as listeners. We can use the default "owner" credentials, but that has admin permissions so a dedicated service account is better (Neil Mackenzie has a good post On Not Using owner with the Azure AppFabric Service Bus with lots of permission details). Click on "Access Control Service" for the namespace, navigate to Service Identities and add a new one. Give the new account a sensible name and description: Let ACS generate a symmetric key for you (this will be the shared secret we use in the on-premise service to authenticate as a listener), but be sure to set the expiration date to something usable. The portal defaults to expiring new identities after 1 year - but when your year is up *your identity will expire without warning* and everything will stop working. In production, you'll need governance to manage identity expiration and a process to make sure you renew identities and roll new keys regularly. The new service identity needs to be authorized to listen on the service bus endpoint. This is done through claim mapping in ACS - we'll set up a rule that says if the nameidentifier in the input claims has the value serviceProvider, in the output we'll have an action claim with the value Listen. In the ACS portal you'll see that there is already a Relying Party Application set up for ServiceBus, which has a Default rule group. Edit the rule group and click Add to add this new rule: The values to use are: Issuer: Access Control Service Input claim type: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier Input claim value: serviceProvider Output claim type: net.windows.servicebus.action Output claim value: Listen When your service namespace and identity are set up, open the Part 1 solution and put your own namespace, service identity name and secret key into the file AzureConnectionDetails.xml in Solution Items, e.g: <azure namespace="sixeyed-ipasbr">    <!-- ACS credentials for the listening service (Part1):-->   <service identityName="serviceProvider"            symmetricKey="nuR2tHhlrTCqf4YwjT2RA2BZ/+xa23euaRJNLh1a/V4="/>  </azure> Build the solution, and the T4 template will generate the Web.config for the service project with your Azure details in the transportClientEndpointBehavior:           <behavior name="SharedSecret">             <transportClientEndpointBehavior credentialType="SharedSecret">               <clientCredentials>                 <sharedSecret issuerName="serviceProvider"                               issuerSecret="nuR2tHhlrTCqf4YwjT2RA2BZ/+xa23euaRJNLh1a/V4="/>               </clientCredentials>             </transportClientEndpointBehavior>           </behavior> , and your service namespace in the Azure endpoint:         <!-- Azure Service Bus endpoints -->          <endpoint address="sb://sixeyed-ipasbr.servicebus.windows.net/net"                   binding="netTcpRelayBinding"                   contract="Sixeyed.Ipasbr.Services.IFormatService"                   behaviorConfiguration="SharedSecret">         </endpoint> The sample project is hosted in IIS, but it won't register with Azure until the service is activated. Typically you'd install AppFabric 1.1 for Widnows Server and set the service to auto-start in IIS, but for dev just navigate to the local REST URL, which will activate the service and register it with Azure. Testing the service locally As well as an Azure endpoint, the service has a WebHttpBinding for local REST access:         <!-- local REST endpoint for internal use -->         <endpoint address="rest"                   binding="webHttpBinding"                   behaviorConfiguration="RESTBehavior"                   contract="Sixeyed.Ipasbr.Services.IFormatService" /> Build the service, then navigate to: http://localhost/Sixeyed.Ipasbr.Services/FormatService.svc/rest/reverse?string=abc123 - and you should see the reversed string response: If your network allows it, you'll get the expected response as before, but in the background your service will also be listening in the cloud. Good stuff! Who needs network security? Onto the next post for consuming the service with the netTcpRelayBinding.  Setting up network access to Azure But, if you get an error, it's because your network is secured and it's doing something to stop the relay working. The Service Bus relay bindings try to use direct TCP connections to Azure, so if ports 9350-9354 are available *outbound*, then the relay will run through them. If not, the binding steps down to standard HTTP, and issues a CONNECT across port 443 or 80 to set up a tunnel for the relay. If your network security guys are doing their job, the first option will be blocked by the firewall, and the second option will be blocked by the proxy, so you'll get this error: System.ServiceModel.CommunicationException: Unable to reach sixeyed-ipasbr.servicebus.windows.net via TCP (9351, 9352) or HTTP (80, 443) - and that will probably be the start of lots of discussions. Network guys don't really like giving servers special permissions for the web proxy, and they really don't like opening ports, so they'll need to be convinced about this. The resolution in our case was to put up a dedicated box in a DMZ, tinker with the firewall and the proxy until we got a relay connection working, then run some traffic which the the network guys monitored to do a security assessment afterwards. Along the way we hit a few more issues, diagnosed mainly with Fiddler and Wireshark: System.Net.ProtocolViolationException: Chunked encoding upload is not supported on the HTTP/1.0 protocol - this means the TCP ports are not available, so Azure tries to relay messaging traffic across HTTP. The service can access the endpoint, but the proxy is downgrading traffic to HTTP 1.0, which does not support tunneling, so Azure can’t make its connection. We were using the Squid proxy, version 2.6. The Squid project is incrementally adding HTTP 1.1 support, but there's no definitive list of what's supported in what version (here are some hints). System.ServiceModel.Security.SecurityNegotiationException: The X.509 certificate CN=servicebus.windows.net chain building failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. The evocation function was unable to check revocation because the revocation server was offline. - by this point we'd given up on the HTTP proxy and opened the TCP ports. We got this error when the relay binding does it's authentication hop to ACS. The messaging traffic is TCP, but the control traffic still goes over HTTP, and as part of the ACS authentication the process checks with a revocation server to see if Microsoft’s ACS cert is still valid, so the proxy still needs some clearance. The service account (the IIS app pool identity) needs access to: www.public-trust.com mscrl.microsoft.com We still got this error periodically with different accounts running the app pool. We fixed that by ensuring the machine-wide proxy settings are set up, so every account uses the correct proxy: netsh winhttp set proxy proxy-server="http://proxy.x.y.z" - and you might need to run this to clear out your credential cache: certutil -urlcache * delete If your network guys end up grudgingly opening ports, they can restrict connections to the IP address range for your chosen Azure datacentre, which might make them happier - see Windows Azure Datacenter IP Ranges. After all that you've hopefully got an on-premise service listening in the cloud, which you can consume from pretty much any technology.

  Read the article

• ASP.NET WebAPI Security 5: JavaScript Clients

  - by Your DisplayName here!

  All samples I showed in my last post were in C#. Christian contributed another client sample in some strange language that is supposed to work well in browsers ;) JavaScript client scenarios There are two fundamental scenarios when it comes to JavaScript clients. The most common is probably that the JS code is originating from the same web application that also contains the web APIs. Think a web page that does some AJAX style callbacks to an API that belongs to that web app – Validation, data access etc. come to mind. Single page apps often fall in that category. The good news here is that this scenario just works. The typical course of events is that the user first logs on to the web application – which will result in an authentication cookie of some sort. That cookie will get round-tripped with your AJAX calls and ASP.NET does its magic to establish a client identity context. Since WebAPI inherits the security context from its (web) host, the client identity is also available here. The other fundamental scenario is JavaScript code *not* running in the context of the WebAPI hosting application. This is more or less just like a normal desktop client – either running in the browser, or if you think of Windows 8 Metro style apps as “real” desktop apps. In that scenario we do exactly the same as the samples did in my last post – obtain a token, then use it to call the service. Obtaining a token from IdentityServer’s resource owner credential OAuth2 endpoint could look like this: thinktectureIdentityModel.BrokeredAuthentication = function (stsEndpointAddress, scope) {     this.stsEndpointAddress = stsEndpointAddress;     this.scope = scope; }; thinktectureIdentityModel.BrokeredAuthentication.prototype = function () {     getIdpToken = function (un, pw, callback) {         $.ajax({             type: 'POST',             cache: false,             url: this.stsEndpointAddress,             data: { grant_type: "password", username: un, password: pw, scope: this.scope },             success: function (result) {                 callback(result.access_token);             },             error: function (error) {                 if (error.status == 401) {                     alert('Unauthorized');                 }                 else {                     alert('Error calling STS: ' + error.responseText);                 }             }         });     };     createAuthenticationHeader = function (token) {         var tok = 'IdSrv ' + token;         return tok;     };     return {         getIdpToken: getIdpToken,         createAuthenticationHeader: createAuthenticationHeader     }; } (); Calling the service with the requested token could look like this: function getIdentityClaimsFromService() {     authHeader = authN.createAuthenticationHeader(token);     $.ajax({         type: 'GET',         cache: false,         url: serviceEndpoint,         beforeSend: function (req) {             req.setRequestHeader('Authorization', authHeader);         },         success: function (result) {              $.each(result.Claims, function (key, val) {                 $('#claims').append($('<li>' + val.Value + '</li>'))             });         },         error: function (error) {             alert('Error: ' + error.responseText);         }     }); I updated the github repository, you can can play around with the code yourself.

  Read the article

• Integration Patterns with Azure Service Bus Relay, Part 3: Anonymous partial-trust consumer

  - by Elton Stoneman

  This is the third in the IPASBR series, see also: Integration Patterns with Azure Service Bus Relay, Part 1: Exposing the on-premise service Integration Patterns with Azure Service Bus Relay, Part 2: Anonymous full-trust .NET consumer As the patterns get further from the simple .NET full-trust consumer, all that changes is the communication protocol and the authentication mechanism. In Part 3 the scenario is that we still have a secure .NET environment consuming our service, so we can store shared keys securely, but the runtime environment is locked down so we can't use Microsoft.ServiceBus to get the nice WCF relay bindings. To support this we will expose a RESTful endpoint through the Azure Service Bus, and require the consumer to send a security token with each HTTP service request. Pattern applicability This is a good fit for scenarios where: the runtime environment is secure enough to keep shared secrets the consumer can execute custom code, including building HTTP requests with custom headers the consumer cannot use the Azure SDK assemblies the service may need to know who is consuming it the service does not need to know who the end-user is Note there isn't actually a .NET requirement here. By exposing the service in a REST endpoint, anything that can talk HTTP can be a consumer. We'll authenticate through ACS which also gives us REST endpoints, so the service is still accessed securely. Our real-world example would be a hosted cloud app, where we we have enough room in the app's customisation to keep the shared secret somewhere safe and to hook in some HTTP calls. We will be flowing an identity through to the on-premise service now, but it will be the service identity given to the consuming app - the end user's identity isn't flown through yet. In this post, we’ll consume the service from Part 1 in ASP.NET using the WebHttpRelayBinding. The code for Part 3 (+ Part 1) is on GitHub here: IPASBR Part 3. Authenticating and authorizing with ACS We'll follow the previous examples and add a new service identity for the namespace in ACS, so we can separate permissions for different consumers (see walkthrough in Part 1). I've named the identity partialTrustConsumer. We’ll be authenticating against ACS with an explicit HTTP call, so we need a password credential rather than a symmetric key – for a nice secure option, generate a symmetric key, copy to the clipboard, then change type to password and paste in the key: We then need to do the same as in Part 2 , add a rule to map the incoming identity claim to an outgoing authorization claim that allows the identity to send messages to Service Bus: Issuer: Access Control Service Input claim type: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier Input claim value: partialTrustConsumer Output claim type: net.windows.servicebus.action Output claim value: Send As with Part 2, this sets up a service identity which can send messages into Service Bus, but cannot register itself as a listener, or manage the namespace. RESTfully exposing the on-premise service through Azure Service Bus Relay The part 3 sample code is ready to go, just put your Azure details into Solution Items\AzureConnectionDetails.xml and “Run Custom Tool” on the .tt files.  But to do it yourself is very simple. We already have a WebGet attribute in the service for locally making REST calls, so we are just going to add a new endpoint which uses the WebHttpRelayBinding to relay that service through Azure. It's as easy as adding this endpoint to Web.config for the service:         <endpoint address="https://sixeyed-ipasbr.servicebus.windows.net/rest"                   binding="webHttpRelayBinding"                    contract="Sixeyed.Ipasbr.Services.IFormatService"                   behaviorConfiguration="SharedSecret">         </endpoint> - and adding the webHttp attribute in your endpoint behavior:           <behavior name="SharedSecret">             <webHttp/>             <transportClientEndpointBehavior credentialType="SharedSecret">               <clientCredentials>                 <sharedSecret issuerName="serviceProvider"                               issuerSecret="gl0xaVmlebKKJUAnpripKhr8YnLf9Neaf6LR53N8uGs="/>               </clientCredentials>             </transportClientEndpointBehavior>           </behavior> Where's my WSDL? The metadata story for REST is a bit less automated. In our local webHttp endpoint we've enabled WCF's built-in help, so if you navigate to: http://localhost/Sixeyed.Ipasbr.Services/FormatService.svc/rest/help - you'll see the uri format for making a GET request to the service. The format is the same over Azure, so this is where you'll be connecting: https://[your-namespace].servicebus.windows.net/rest/reverse?string=abc123 Build the service with the new endpoint, open that in a browser and you'll get an XML version of an HTTP status code - a 401 with an error message stating that you haven’t provided an authorization header: <?xml version="1.0"?><Error><Code>401</Code><Detail>MissingToken: The request contains no authorization header..TrackingId:4cb53408-646b-4163-87b9-bc2b20cdfb75_5,TimeStamp:10/3/2012 8:34:07 PM</Detail></Error> By default, the setup of your Service Bus endpoint as a relying party in ACS expects a Simple Web Token to be presented with each service request, and in the browser we're not passing one, so we can't access the service. Note that this request doesn't get anywhere near your on-premise service, Service Bus only relays requests once they've got the necessary approval from ACS. Why didn't the consumer need to get ACS authorization in Part 2? It did, but it was all done behind the scenes in the NetTcpRelayBinding. By specifying our Shared Secret credentials in the consumer, the service call is preceded by a check on ACS to see that the identity provided is a) valid, and b) allowed access to our Service Bus endpoint. By making manual HTTP requests, we need to take care of that ACS check ourselves now. We do that with a simple WebClient call to the ACS endpoint of our service; passing the shared secret credentials, we will get back an SWT: var values = new System.Collections.Specialized.NameValueCollection(); values.Add("wrap_name", "partialTrustConsumer"); //service identity name values.Add("wrap_password", "suCei7AzdXY9toVH+S47C4TVyXO/UUFzu0zZiSCp64Y="); //service identity password values.Add("wrap_scope", "http://sixeyed-ipasbr.servicebus.windows.net/"); //this is the realm of the RP in ACS var acsClient = new WebClient(); var responseBytes = acsClient.UploadValues("https://sixeyed-ipasbr-sb.accesscontrol.windows.net/WRAPv0.9/", "POST", values); rawToken = System.Text.Encoding.UTF8.GetString(responseBytes); With a little manipulation, we then attach the SWT to subsequent REST calls in the authorization header; the token contains the Send claim returned from ACS, so we will be authorized to send messages into Service Bus. Running the sample Navigate to http://localhost:2028/Sixeyed.Ipasbr.WebHttpClient/Default.cshtml, enter a string and hit Go! - your string will be reversed by your on-premise service, routed through Azure: Using shared secret client credentials in this way means ACS is the identity provider for your service, and the claim which allows Send access to Service Bus is consumed by Service Bus. None of the authentication details make it through to your service, so your service is not aware who the consumer is (MSDN calls this "anonymous authentication").

  Read the article

• ODEE Green Field (Windows) Part 4 - Documaker

  - by AndyL-Oracle

  Welcome back! We're about nearing completion of our installation of Oracle Documaker Enterprise Edition ("ODEE") in a green field. In my previous post, I covered the installation of SOA Suite for WebLogic. Before that, I covered the installation of WebLogic, and Oracle 11g database - all of which constitute the prerequisites for installing ODEE. Naturally, if your environment already has a WebLogic server and Oracle database, then you can skip all those components and go straight for the heart of the installation of ODEE. The ODEE installation is comprised of two procedures, the first covers the installation, which is running the installer and answering some questions. This will lay down the files necessary to install into the tiers (e.g. database schemas, WebLogic domains, etcetera). The second procedure is to deploy the configuration files into the various components (e.g. deploy the database schemas, WebLogic domains, SOA composites, etcetera). I will segment my posts accordingly! Let's get started, shall we? Unpack the installation files into a temporary directory location. This should extract a zip file. Extract that zip file into the temporary directory location. Navigate to and execute the installer in Disk1/setup.exe. You may have to allow the program to run if User Account Control is enabled. Once the dialog below is displayed, click Next. Select your ODEE Home - inside this directory is where all the files will be deployed. For ease of support, I recommend using the default, however you can put this wherever you want. Click Next. Select the database type, database connection type – note that the database name should match the value used for the connection type (e.g. if using SID, then the name should be IDMAKER; if using ServiceName, the name should be “idmaker.us.oracle.com”). Verify whether or not you want to enable advanced compression. Note: if you are not licensed for Oracle 11g Advanced Compression option do not use this option! Terrible, terrible calamities will befall you if you do! Click Next. Enter the Documaker Admin user name (default "dmkr_admin" is recommended for support purposes) and set the password. Update the System name and ID (must be unique) if you want/need to - since this is a green field install you should be able to use the default System ID. The only time you'd change this is if you were, for some reason, installing a new ODEE system into an existing schema that already had a system. Click Next. Enter the Assembly Line user name (default "dmkr_asline" is recommended) and set the password. Update the Assembly Line name and ID (must be unique) if you want/need to - it's quite possible that at some point you will create another assembly line, in which case you have several methods of doing so. One is to re-run the installer, and in this case you would pick a different assembly line ID and name. Click Next. Note: you can set the DB folder if needed (typically you don’t – see ODEE Installation Guide for specifics. Select the appropriate Application Server type - in this case, our green field install is going to use WebLogic - set the username to weblogic (this is required) and specify your chosen password. This credential will be used to access the application server console/control panel. Keep in mind that there are specific criteria on password choices that are required by WebLogic, but are not enforced by the installer (e.g. must contain a number, must be of a certain length, etcetera). Choose a strong password. Set the connection information for the JMS server. Note that for the 12.3.x version, the installer creates a separate JVM (WebLogic managed server) that hosts the JMS server, whereas prior editions place the JMS server on the AdminServer.  You may also specify a separate URL to the JMS server in case you intend to move the JMS resources to a separate/different server (e.g. back to AdminServer). You'll need to provide a login principal and credentials - for simplicity I usually make this the same as the WebLogic domain user, however this is not a secure practice! Make your JMS principal different from the WebLogic principal and choose a strong password, then click Next. Specify the Hot Folder(s) (comma-delimited if more than one) - this is the directory/directories that is/are monitored by ODEE for jobs to process. Click Next. If you will be setting up an SMTP server for ODEE to send emails, you may configure the connection details here. The details required are simple: hostname, port, user/password, and the sender's address (e.g. emails will appear to be sent by the address shown here so if the recipient clicks "reply", this is where it will go). Click Next. If you will be using Oracle WebCenter:Content (formerly known as Oracle UCM) you can enable this option and set the endpoints/credentials here. If you aren't sure, select False - you can always go back and enable this later. I'm almost 76% certain there will be a post sometime in the future that details how to configure ODEE + WCC:C! Click Next. If you will be using Oracle UMS for sending MMS/text messages, you can enable and set the endpoints/credentials here. As with UCM, if you're not sure, don't enable it - you can always set it later. Click Next. On this screen you can change the endpoints for the Documaker Web Service (DWS), and the endpoints for approval processing in Documaker Interactive. The deployment process for ODEE will create 3 managed WebLogic servers for hosting various Documaker components (JMS, Interactive, DWS, Dashboard, Documaker Administrator, etcetera) and it will set the ports used for each of these services. In this screen you can change these values if you know how you want to deploy these managed servers - but for now we'll just accept the defaults. Click Next. Verify the installation details and click Install. You can save the installation into a response file if you need to (which might be useful if you want to rerun this installation in an unattended fashion). Allow the installation to progress... Click Next. You can save the response file if needed (e.g. in case you forgot to save it earlier!) Click Finish. That's it, you're done with the initial installation. Have a look around the ODEE_HOME that you just installed (remember we selected c:\oracle\odee_1?) and look at the files that are laid down. Don't change anything just yet! Stay tuned for the next segment where we complete and verify the installation. 

  Read the article

• WIF, ADFS 2 and WCF&ndash;Part 2: The Service

  - by Your DisplayName here!

  OK – so let’s first start with a simple WCF service and connect that to ADFS 2 for authentication. The service itself simply echoes back the user’s claims – just so we can make sure it actually works and to see how the ADFS 2 issuance rules emit claims for the service: [ServiceContract(Namespace = "urn:leastprivilege:samples")] public interface IService {     [OperationContract]     List<ViewClaim> GetClaims(); } public class Service : IService {     public List<ViewClaim> GetClaims()     {         var id = Thread.CurrentPrincipal.Identity as IClaimsIdentity;         return (from c in id.Claims                 select new ViewClaim                 {                     ClaimType = c.ClaimType,                     Value = c.Value,                     Issuer = c.Issuer,                     OriginalIssuer = c.OriginalIssuer                 }).ToList();     } } The ViewClaim data contract is simply a DTO that holds the claim information. Next is the WCF configuration – let’s have a look step by step. First I mapped all my http based services to the federation binding. This is achieved by using .NET 4.0’s protocol mapping feature (this can be also done the 3.x way – but in that scenario all services will be federated): <protocolMapping>   <add scheme="http" binding="ws2007FederationHttpBinding" /> </protocolMapping> Next, I provide a standard configuration for the federation binding: <bindings>   <ws2007FederationHttpBinding>     <binding>       <security mode="TransportWithMessageCredential">         <message establishSecurityContext="false">           <issuerMetadata address="https://server/adfs/services/trust/mex" />         </message>       </security>     </binding>   </ws2007FederationHttpBinding> </bindings> This binding points to our ADFS 2 installation metadata endpoint. This is all that is needed for svcutil (aka “Add Service Reference”) to generate the required client configuration. I also chose mixed mode security (SSL + basic message credential) for best performance. This binding also disables session – you can control that via the establishSecurityContext setting on the binding. This has its pros and cons. Something for a separate blog post, I guess. Next, the behavior section adds support for metadata and WIF: <behaviors>   <serviceBehaviors>     <behavior>       <serviceMetadata httpsGetEnabled="true" />       <federatedServiceHostConfiguration />     </behavior>   </serviceBehaviors> </behaviors> The next step is to add the WIF specific configuration (in <microsoft.identityModel />). First we need to specify the key material that we will use to decrypt the incoming tokens. This is optional for web applications but for web services you need to protect the proof key – so this is mandatory (at least for symmetric proof keys, which is the default): <serviceCertificate>   <certificateReference storeLocation="LocalMachine"                         storeName="My"                         x509FindType="FindBySubjectDistinguishedName"                         findValue="CN=Service" /> </serviceCertificate> You also have to specify which incoming tokens you trust. This is accomplished by registering the thumbprint of the signing keys you want to accept. You get this information from the signing certificate configured in ADFS 2: <issuerNameRegistry type="...ConfigurationBasedIssuerNameRegistry">   <trustedIssuers>     <add thumbprint="d1 … db"           name="ADFS" />   </trustedIssuers> </issuerNameRegistry> The last step (promised) is to add the allowed audience URIs to the configuration – WCF clients use (by default – and we’ll come back to this) the endpoint address of the service: <audienceUris>   <add value="https://machine/soapadfs/service.svc" /> </audienceUris> OK – that’s it – now we have a basic WCF service that uses ADFS 2 for authentication. The next step will be to set-up ADFS to issue tokens for this service. Afterwards we can explore various options on how to use this service from a client. Stay tuned… (if you want to have a look at the full source code or peek at the upcoming parts – you can download the complete solution here)

  Read the article

• Remote Desktop Services Gateway Issue

  - by AVandelay05

  Alright fellow techies here's the rundown. I have installed Server 2008 r2 Remote Dekstop Services on a VM in my network. I installed the following RD role services: RD Session Host, Licensing, Connection Broker, Gateway, Web Access. When I set things up originally, the gateway server and RDWeb worked as it should locally. After getting things running locally (remoteserver.domainname.local) I wanted to test things externally. From the outside, I couldn't get things running (meaning I could connect to rdweb access externally, but when I tried to run an app I would get the message "can't connect/find computer"). Here's my setup for external access The VM has every RD Services role services installed on it, meaning it acts as gateway, rd web access, session host, licensing, the whole bit. I made a self-signed certificate on the gateway server (gateway.domainname.net is the cert name). Internally, I have a secondary forward-lookup zone called domainname.net with an A record gateway pointing to the local IP of the gateway server. On our public DNS (domainname.net) I have an A record gateway. This is to access the RDWeb externally. In IIS I have the following authentication settings RDWeb: All disabled except for anonymous authentication Rpc: All disabled except for basic and windows RpcWithCert: All disbled except for windows authentication I have the necessary web access config in our sonicwall tz210 (https and rdp, external ip pointing to local ip of rds server) RAP and CAP have the correct user and computer groups, authentication, and allowed devices After all of this, here's what happens accessing externally. I can login correctly to RDWeb Access (I've tried a bogus login, I can't login to it so that's working properly). I see the Apps for use. I click on an app, click connect, the credential window opens, I put in the correct user creds, it tries to connect to the gateway server, but then the cred window comes back in view. I tried to reach a limit of failed logins, but never reached one, haha. So from the same external client machine I try to connect to the gateway through a Remote Desktop connection. I put in the correct gateway settings in the RD window, try to connect and get the same results as I did in RDWeb access. I checked the event logs on the RD Services machine and saw the following event IDs around the time I tried to login externally: ID 6037 with the message "The program svchost.exe, with the assigned process ID 2168, could not authenticate locally by using the target name host/gateway.domainname.net. The target name used is not valid. A target name should refer to one of the local computer names, for example, the DNS host name. Try a different target name." ID 10 RADWebAccess "RD Web Access was unable to access gateway.domainname.net, which is the server that is specified as running the RemoteApp and Desktop Connection Management service. Ensure that the computer account of the RD Web Access server is a member of the TS Web Access Computers security group on gateway.domainname.net" ID 4625 "An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: Administrator Account Domain: gateway.domainname.net Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc000006a Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: USER-LAPTOP Source Network Address: External IP Source Port: 63125 Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 This event is generated when a logon request fails. It is generated on the computer where access was attempted. The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe. The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network). The Process Information fields indicate which account and process on the system requested the logon. The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases. The authentication information fields provide detailed information about this specific logon request. - Transited services indicate which intermediate services have participated in this logon request. - Package name indicates which sub-protocol was used among the NTLM protocols." I don't think the VM has a null SID. The SID of the VM and it's physical host have different SIDS. I can access the blank page for rpc externally using the external gateway name. It seems like authentication is a problem. Also, is it a problem that the external name of the gateway server doesn't match the local name? The external name (which the cert is based on) is gateway.domainname.net and the internal name is remoteserver.domainname.local. That's the only thing I can think of that would be the problem, but the external name has to be different from the local right? Internally, I ping gateway.domainname.net and it gives me the correct local IP of the server. Now, there isn't an actual computer name in AD, but I don't know how I would achieve that? I hope I've been clear....any help would be appreciated. I think I'm close to achieving this. :)

  Read the article

• Asp.net MVC/Silverlight and Sharepoint 2010 integration

  - by Robert Koritnik

  Just a sidenote: I'm not sure whether I should post this to serverfault as well, because some MOSS admin may have some info for me as well? Additional note 1: I've found this document (Asp.net MVC 2 & Sharepoint integration) if anybody with sufficient expirience is willing to comment on its content whether this can be used in my described scenario or not. Additional note 2: I've discovered (later) that Silverlight is supported in Sharepoint 2010 so I'm considering it as well. So if anyone would comment on silverlight integration as well. A bit of explanation first (without Asp.net MVC/Silverlight) Is it possible to integrate the two? Is it possible to write an application that would share at least credential information with MOSS? I have to write a MOSS application that has to do with these technologies: MOSS 2010 Personal client certificates authentication (most probably on USB keys) Active Directory Federation Services Separate SQL DB that would serve application specific data (separate as not being part of MOSS DB) How should it work? Users should authenticate using personal certificates into MOSS 2010 There would be a certain part of MOSS that would be related to my custom application This application should only authorize certain users via AD FS - I guess these users should have a certain security claim attached to them This application should manage users (that have access to this app) with additional (app specific) security claims related to this application (as additional application level authorization rights for individual application parts) This application should use custom SQL 2008 DB heavily with its own data This application should have the possibility to integrate with external systems as well (Exchange for instance to inject calendar entries, ERP systems etc) This application should be able to export its data (from its DB) to files. I don't know if it's possible, but it would be nice if the app could add these files to MOSS and attach authorization info to them so only users with sufficient rights would be able to view/open these files. Why Asp.net MVC/Silverlight then? I'm very well versed in Asp.net MVC (also with the latest version) and I haven't done anything on Sharepoint since version 2003 (which doesn't do me no good or prepare me for the latest version in any way shape or form). This project will most probably be a death march project so I would rather write my application as a UI rich Asp.net MVC application and somehow integrate it into MOSS. But not only via a link, because I would like to at least share credentials, so users wouldn't need to re-login when accessing my app. Using Asp.net MVC I would at least have the possibility to finish on time or be less death marching. Is this at all possible? I haven't done any serious project using SIlverlight, but I will sooner or later have to. So I'm also considering a jump into it at this moment, because it still might make this application development easier than strict Sharepoint 2010. Questions Is it possible to integrate Asp.net MVC/Silverlight into MOSS as described above? If integration is not possible, would it be possible to create a completely MOSS based application that would work as described? Which parts of MOSS 2010 should I use to accomplish what I need?

  Read the article

• "FOR UPDATE" v/s "LOCK IN SHARE MODE" : Allow concurrent threads to read updated "state" value of locked row

  - by shadesco

  I have the following scenario: User X logs in to the application from location lc1: call it Ulc1 User X (has been hacked, or some friend of his knows his login credential, or he just logs in from a different browser on his machine,etc.. u got the point) logs in at the same time from location lc2: call it Ulc2 I am using a main servlet which : - gets a connection from database pooling - sets autocommit to false - executes a command that goes through app layers: if all successful, set autocommit to true in a "finally" statement, and closes connection. Else if an exception happens, rollback(). In my database (mysql/innoDb) i have a "history" table, with row columns: id(primary key) |username | date | topic | locked The column "locked" has by default value "false" and it serves as a flag that marks if a specific row is locked or not. Each row is specific to a user (as u can see from the username column) So back to the scenario: --Ulc1 sends the command to update his history from the db for date "D" and topic "T". --Ulc2 sends the same command to update history from the db for the same date "D" and same topic "T" at the exact same time. I want to implement an mysql/innoDB locking system that will enable whichever thread arriving to do the following check: Is column "locked" for this row true or not? if true, return a message to the user that " he is already updating the same data from another location" if not true (ie not locked) : flag it as locked and update then reset locked to false once finished. Which of these two mysql locking techniques, will actually allow the 2nd arriving thread from reading the "updated" value of the locked column to decide wt action to take?Should i use "FOR UPDATE" or "LOCK IN SHARE MODE"? This scenario explains what i want to accomplish: - Ulc1 thread arrives first: column "locked" is false, set it to true and continue updating process - Ulc2 thread arrives while Ulc1's transaction is still in process, and even though the row is locked through innoDb functionalities, it doesn't have to wait but in fact reads the "new" value of column locked which is "true", and so doesn't in fact have to wait till Ulc1 transaction commits to read the value of the "locked" column(anyway by that time the value of this column will already have been reset to false). I am not very experienced with the 2 types of locking mechanisms, what i understand so far is that LOCK IN SHARE MODE allow other transaction to read the locked row while FOR UPDATE doesn't even allow reading. But does this read gets on the updated value? or the 2nd arriving thread has to wait the first thread to commit to then read the value? Any recommendations about which locking mechanism to use for this scenario is appreciated. Also if there's a better way to "check" if the row has been locked (other than using a true/false column flag) please let me know about it. thank you SOLUTION (Jdbc pseudocode example based on @Darhazer's answer) Table : [ id(primary key) |username | date | topic | locked ] connection.setautocommit(false); //transaction-1 PreparedStatement ps1 = "Select locked from tableName for update where id="key" and locked=false); ps1.executeQuery(); //transaction 2 PreparedStatement ps2 = "Update tableName set locked=true where id="key"; ps2.executeUpdate(); connection.setautocommit(true);// here we allow other transactions threads to see the new value connection.setautocommit(false); //transaction 3 PreparedStatement ps3 = "Update tableName set aField="Sthg" where id="key" And date="D" and topic="T"; ps3.executeUpdate(); // reset locked to false PreparedStatement ps4 = "Update tableName set locked=false where id="key"; ps4.executeUpdate(); //commit connection.setautocommit(true);

  Read the article

• 2 way SSL between SOA and OSB

  - by Johnny Shum

  If you have a need to use 2 way SSL between SOA composite and external partner links, you can follow these steps. Create the identity keystores, trust keystores, and server certificates. Setup keystores and SSL on WebLogic Setup server to use 2 way SSL Configure your SOA composite's partner link to use 2 way SSL Configure SOA engine two ways SSL In this case,  I use SOA and OSB for the test.  I started with a separate OSB and SOA domains.  I deployed two soap based proxies on OSB and two composites on SOA.  In SOA, one composite invokes a OSB proxy service, the other is invoked by the OSB.  Similarly,  in OSB,  one proxy invokes a SOA composite and the other is invoked by SOA. 1. Create the identity keystores, trust keystores and the server certificates Since this is a development environment, I use JDK's keytool to create the stores and use self signing certificate.  For production environment, you should use certificates from a trusted certificate authority like Verisign.    I created a script below to show what is needed in this step.  The only requirement is when creating the SOA identity certificate, you MUST use the alias mykey. STOREPASS=welcome1KEYPASS=welcome1# generate identity keystore for soa and osb.  Note: For SOA, you MUST use alias mykeyecho "creating stores"keytool -genkey -alias mykey -keyalg "RSA" -sigalg "SHA1withRSA" -dname "CN=soa, C=US" -keystore soa-default-keystore.jks -storepass $STOREPASS -keypass $KEYPASS keytool -genkey -alias osbkey -keyalg "RSA" -sigalg "SHA1withRSA" -dname "CN=osb, C=US" -keystore osb-default-keystore.jks -storepass $STOREPASS -keypass $KEYPASS# listing keystore contentsecho "listing stores contents"keytool -list -alias mykey -keystore soa-default-keystore.jks -storepass $STOREPASSkeytool -list -alias osbkey -keystore osb-default-keystore.jks -storepass $STOREPASS# exporting certs from storesecho "export certs from  stores"keytool -exportcert -alias mykey -keystore soa-default-keystore.jks -storepass $STOREPASS -file soacert.derkeytool -exportcert -alias osbkey -keystore osb-default-keystore.jks -storepass $STOREPASS -file osbcert.der # import certs to trust storesecho "import certs"keytool -importcert -alias osbkey -keystore soa-trust-keystore.jks -storepass $STOREPASS -file osbcert.der -keypass $KEYPASSkeytool -importcert -alias mykey -keystore osb-trust-keystore.jks -storepass $STOREPASS -file soacert.der  -keypass $KEYPASS SOA suite uses the JDK's SSL implementation for outbound traffic instead of the WebLogic's implementation.  You will need to import the partner's public cert into the trusted keystore used by SOA.  The default trusted keystore for SOA is DemoTrust.jks and it is located in $MW_HOME/wlserver_10.3/server/lib.   (This is set in the startup script -Djavax.net.ssl.trustStore).   If you use your own trusted keystore, then you will need to import it into your own trusted keystore. keytool -importcert -alias osbkey -keystore $MW_HOME/wlserver_10.3/server/lib/DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase  -file osbcert.der -keypass $KEYPASS If you do not perform this step, you will encounter this exception in runtime when SOA invokes OSB service using 2 way SSL Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target  2.  Setup keystores and SSL on WebLogic First, you will need to login to the WebLogic console, navigate to the server's configuration->Keystore's tab.   Change the Keystores type to Custom Identity and Custom Trust and enter the rest of the fields. Then you navigate to the SSL tab, enter the fields in the identity section and expand the Advanced section.  Since I am using self signing cert on my VM enviornment, I disabled Hostname verification.  In real production system, this should not be the case.   I also enabled the option "Use Server Certs", so that the application uses the server cert to initiate https traffic (it is important to enable this in OSB). Last, you enable SSL listening port in the Server's configuration->General tab. 3.  Setup server to use 2 way SSL If you follow the screen shot in previous step, you can see in the Server->Configuration->SSL->Advanced section, there is an option for Two Way Client Cert Behavior,  you should set this to Client Certs Requested and Enforced. Repeat step 2 and 3 done on OSB.  After all these configurations,  you have to restart all the servers. 4.  Configure your SOA composite's partner link to use 2 way SSL You do this by modifying the composite.xml in your project, locate the partner's link reference and add the property oracle.soa.two.way.ssl.enabled.   <reference name="callosb" ui:wsdlLocation="helloword.wsdl">    <interface.wsdl interface="http://www.examples.com/wsdl/HelloService.wsdl#wsdl.interface(Hello_PortType)"/>    <binding.ws port="http://www.examples.com/wsdl/HelloService.wsdl#wsdl.endpoint(Hello_Service/Hello_Port)"                location="helloword.wsdl" soapVersion="1.1">      <property name="weblogic.wsee.wsat.transaction.flowOption"                type="xs:string" many="false">WSDLDriven</property>   <property name="oracle.soa.two.way.ssl.enabled">true</property>    </binding.ws>  </reference> In OSB, you should have checked the HTTPS required flag in the proxy's transport configuration.  After this,  rebuilt the composite jar file and ready to deploy in the EM console later. 5.  Configure SOA engine two ways SSL Oracle SOA Suite uses both Oracle WebLogic Server and Sun Secure Socket Layer (SSL) stacks for two-way SSL configurations. For the inbound web service bindings, Oracle SOA Suite uses the Oracle WebLogic Server infrastructure and, therefore, the Oracle WebLogic Server libraries for SSL.  This is already done by step 2 and 3 in the previous section. For the outbound web service bindings, Oracle SOA Suite uses JRF HttpClient and, therefore, the Sun JDK libraries for SSL.  You do this by configuring the SOA Engine in the Enterprise Manager Console, select soa-infra->SOA Administration->Common Properties Then click at the link at the bottom of the page:  "More SOA Infra Advances Infrastructure Configuration Properties" and then enter the full path of soa identity keystore in the value field of the KeyStoreLocation attribute.  Click Apply and Return then navigate to the domain->security->credential. Here, you provide the password to the keystore.  Note: the alias of the certficate must be mykey as described in step 1, so you only need to provide the password to the identity keystore.   You accomplish this by: Click Create Map In the Map Name field, enter SOA, and click OK Click Create Key Enter the following details where the password is the password for the SOA identity keystore. 6.  Test and Trouble Shooting Once the setup is complete and server restarted, you can deploy the composite in the EM console and test it.  In case of error,  you can read the server log file to determine the cause of the error.  For example, If you have not setup step 5 and test 2 way SSL, you will see this in the log when invoking OSB from BPEL: java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: oracle.fabric.common.FabricInvocationException: Unable to access the following endpoint(s): https://localhost.localdomain:7002/default/helloword ####<Sep 22, 2012 2:07:37 PM CDT> <Error> <oracle.soa.bpel.engine.ws> <rhel55> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0AFDAEF20610F8FD89C5> ............ <11d1def534ea1be0:-4034173:139ef56d9f0:-8000-00000000000002ec> <1348340857956> <BEA-000000> <got FabricInvocationException sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target If you have not enable WebLogic SSL to use server certificate in the console and invoke SOA composite from OSB using two ways SSL, you will see this error: ####<Sep 22, 2012 2:07:37 PM CDT> <Warning> <Security> <rhel55> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <11d1def534ea1be0:-51f5c76a:139ef5e1e1a:-8000-00000000000000e2> <1348340857776> <BEA-090485> <CERTIFICATE_UNKNOWN alert was received from localhost.localdomain - 127.0.0.1. The peer has an unspecified issue with the certificate. SSL debug tracing should be enabled on the peer to determine what the issue is.> ####<Sep 22, 2012 2:07:37 PM CDT> <Warning> <Security> <rhel55> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <11d1def534ea1be0:-51f5c76a:139ef5e1e1a:-8000-00000000000000e4> <1348340857786> <BEA-090485> <CERTIFICATE_UNKNOWN alert was received from localhost.localdomain - 127.0.0.1. The peer has an unspecified issue with the certificate. SSL debug tracing should be enabled on the peer to determine what the issue is.> ####<Sep 22, 2012 2:27:21 PM CDT> <Warning> <Security> <rhel55> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <11d1def534ea1be0:-51f5c76a:139ef5e1e1a:-8000-0000000000000124> <1348342041926> <BEA-090497> <HANDSHAKE_FAILURE alert received from localhost - 127.0.0.1. Check both sides of the SSL configuration for mismatches in supported ciphers, supported protocol versions, trusted CAs, and hostname verification settings.> References http://docs.oracle.com/cd/E23943_01/admin.1111/e10226/soacompapp_secure.htm#CHDCFABB   Section 5.6.4 http://docs.oracle.com/cd/E23943_01/web.1111/e13707/ssl.htm#i1200848

  Read the article

• Using the OAM Mobile & Social SDK to secure native mobile apps - Part 2 : OAM Mobile & Social Server configuration

  - by kanishkmahajan

  Objective  In the second part of this blog post I'll now cover configuration of OAM to secure our sample native apps developed using the iOS SDK. First, here are some key server side concepts: Application Profiles: An application profile is a logical representation of your application within OAM server. It could be a web (html/javascript) or native (iOS or Android) application. Applications may have different requirements for AuthN/AuthZ, and therefore each application that interacts with OAM Mobile & Social REST services must be uniquely defined. Service Providers: Service providers represent the back end services that are accessed by applications. With OAM Mobile & Social these services are in the areas of authentication, authorization and user profile access. A Service Provider then defines a type or class of service for authentication, authorization or user profiles. For example, the JWTAuthentication provider performs authentication and returns JWT (JSON Web Tokens) to the application. In contrast, the OAMAuthentication also provides authentication but uses OAM SSO tokens Service Profiles:  A Service Profile is a logical envelope that defines a service endpoint URL for a service provider for the OAM Mobile & Social Service. You can create multiple service profiles for a service provider to define token capabilities and service endpoints. Each service provider instance requires atleast one corresponding service profile.The  OAM Mobile & Social Service includes a pre-configured service profile for each pre-configured service provider. Service Domains: Service domains bind together application profiles and service profiles with an optional security handler. So now let's configure the OAM server. Additional details are in the OAM Documentation and this post simply provides an outline of configuration tasks required to configure OAM for securing native apps.  Configuration  Create The Application Profile Log on to the Oracle Access Management console and from System Configuration -> Mobile and Social -> Mobile Services, select "Create" under Application Profiles. You would do this  step twice - once for each of the native apps - AvitekInventory and AvitekScheduler. Enter the parameters for the new Application profile: Name:  The application name. In this example we use 'InventoryApp' for the AvitekInventory app and 'SchedulerApp' for the AvitekScheduler app. The application name configured here must match the application name in the settings for the deployed iOS application. BaseSecret: Enter a password here. This does not need to match any existing password. It is used as an encryption key between the client and the OAM server.  Mobile Configuration: Enable this checkbox for any mobile applications. This enables the SDK to collect and send Mobile specific attributes to the OAM server.  Webview: Controls the type of browser that the iOS application will use. The embedded browser (default) will render the browser within the application. External will use the system standalone browser. External can sometimes be preferable for debugging URLScheme: The URL scheme associated with the iOS apps that is also used as a custom URL scheme to register O/S handlers that will take control when OAM transfers control to device. For the AvitekInventory and the AvitekScheduler apps I used osa:// and client:// respectively. You set this scheme in Xcode while developing your iOS Apps under Info->URL Types.  Bundle Identifier : The fully qualified name of your iOS application. You typically set this when you create a new Xcode project or under General->Identity in Xcode. For the AvitekInventory and AvitekScheduler apps these were com.us.oracle.AvitekInventory and com.us.oracle.AvitekScheduler respectively.  Create The Service Domain Select create under Service domains. Create a name for your domain (AvitekDomain is what I've used). The name configured must match the service domain set in the iOS application settings. Under "Application Profile Selection" click the browse button. Choose the application profiles that you created in the previous step one by one. Set the InventoryApp as the SSO agent (with an automatic priority of 1) and the SchedulerApp as the SSO client. This associates these applications with this service domain and configures them in a 'circle of trust'.  Advance to the next page of the wizard to configure the services for this domain. For this example we will use the following services:  Authentication:   This will use the JWT (JSON Web Token) format authentication provider. The iOS application upon successful authentication will receive a signed JWT token from OAM Mobile & Social service. This token will be used in subsequent calls to OAM. Use 'MobileOAMAuthentication' here. Authorization:  The authorization provider. The SDK makes calls to this provider endpoint to obtain authorization decisions on resource requests. Use 'OAMAuthorization' here. User Profile Service:  This is the service that provides user profile services (attribute lookup, attribute modification). It can be any directory configured as a data source in OAM.  And that's it! We're done configuring our native apps. In the next section, let's look at some additional features that were mentioned in the earlier post that are automated by the SDK for the app developer i.e. these are areas that require no additional coding by the app developer when developing with the SDK as they only require server side configuration: Additional Configuration  Offline Authentication Select this option in the service domain configuration to allow users to log in and authenticate to the application locally. Clear the box to block users from authenticating locally. Strong Authentication By simply selecting the OAAMSecurityHandlerPlugin while configuring mobile related Service Domains, the OAM Mobile&Social service allows sophisticated device and client application registration logic as well as the advanced risk and fraud analysis logic found in OAAM to be applied to mobile authentication. Let's look at some scenarios where the OAAMSecurityHandlerPlugin gets used. First, when we configure OAM and OAAM to integrate together using the TAP scheme, then that integration kicks off by selecting the OAAMSecurityHandlerPlugin in the mobile service domain. This is how the mobile device is now prompted for KBA,OTP etc depending on the TAP scheme integration and the OAM users registered in the OAAM database. Second, when we configured the service domain, there were claim attributes there that are already pre-configured in OAM Mobile&Social service and we simply accepted the default values- these are the set of attributes that will be fetched from the device and passed to the server during registration/authentication as device profile attributes. When a mobile application requests a token through the Mobile Client SDK, the SDK logic will send the Device Profile attributes as a part of an HTTP request. This set of Device Profile attributes enhances security by creating an audit trail for devices that assists device identification. When the OAAM Security Plug-in is used, a particular combination of Device Profile attribute values is treated as a device finger print, known as the Digital Finger Print in the OAAM Administration Console. Each finger print is assigned a unique fingerprint number. Each OAAM session is associated with a finger print and the finger print makes it possible to log (and audit) the devices that are performing authentication and token acquisition. Finally, if the jail broken option is selected while configuring an application profile, the SDK detects a device is jail broken based on configured policy and if the OAAM handler is configured the plug-in can allow or block access to client device depending on the OAAM policy as well as detect blacklisted, lost or stolen devices and send a wipeout command that deletes all the mobile &social relevant data and blocks the device from future access. 1024x768 Social Logins Finally, let's complete this post by adding configuration to configure social logins for mobile applications. Although the Avitek sample apps do not demonstrate social logins this would be an ideal exercise for you based on the sample code provided in the earlier post. I'll cover the server side configuration here (with Facebook as an example) and you can retrofit the code to accommodate social logins by following the steps outlined in "Invoking Authentication Services" and add code in LoginViewController and maybe create a new delegate - AvitekRPDelegate based on the description in the previous post. So, here all you will need to do is configure an application profile for social login, configure a new service domain that uses the social login application profile, register the app on Facebook and finally configure the Facebook OAuth provider in OAM with those settings. Navigate to Mobile and Social, click on "Internet Identity Services" and create a new application profile. Here are the relevant parameters for the new application profile (-also we're not registering the social user in OAM with this configuration below, however that is a key feature as well): Name:  The application name. This must match the name of the of mobile application profile created for your application under Mobile Services. We used InventoryApp for this example. SharedSecret: Enter a password here. This does not need to match any existing password. It is used as an encryption key between the client and the OAM Mobile and Social service.  Mobile Application Return URL: After the Relying Party (social) login, the OAM Mobile & Social service will redirect to the iOS application using this URI. This is defined under Info->URL type and we used 'osa', so we define this here as 'osa://' Login Type: Choose to allow only internet identity authentication for this exercise. Authentication Service Endpoint : Make sure that /internetidentityauthentication is selected. Login to http://developers.facebook.com using your Facebook account and click on Apps and register the app as InventoryApp. Note that the consumer key and API secret gets generated automatically by the Facebook OAuth server. Navigate back to OAM and under Mobile and Social, click on "Internet Identity Services" and edit the Facebook OAuth Provider. Add the consumer key and API secret from the Facebook developers site to the Facebook OAuth Provider: Navigate to Mobile Services. Click on New to create a new service domain. In this example we call the domain "AvitekDomainRP". The type should be 'Mobile Application' and the application credential type 'User Token'. Add the application "InventoryApp" to the domain. Advance the next page of the wizard. Select the  default service profiles but ensure that the Authentication Service is set to 'InternetIdentityAuthentication'. Finish the creation of the service domain.

  Read the article

• .NET WebRequest.PreAuthenticate not quite what it sounds like

  - by Rick Strahl

  I’ve run into the  problem a few times now: How to pre-authenticate .NET WebRequest calls doing an HTTP call to the server – essentially send authentication credentials on the very first request instead of waiting for a server challenge first? At first glance this sound like it should be easy: The .NET WebRequest object has a PreAuthenticate property which sounds like it should force authentication credentials to be sent on the first request. Looking at the MSDN example certainly looks like it does: http://msdn.microsoft.com/en-us/library/system.net.webrequest.preauthenticate.aspx Unfortunately the MSDN sample is wrong. As is the text of the Help topic which incorrectly leads you to believe that PreAuthenticate… wait for it - pre-authenticates. But it doesn’t allow you to set credentials that are sent on the first request. What this property actually does is quite different. It doesn’t send credentials on the first request but rather caches the credentials ONCE you have already authenticated once. Http Authentication is based on a challenge response mechanism typically where the client sends a request and the server responds with a 401 header requesting authentication. So the client sends a request like this: GET /wconnect/admin/wc.wc?_maintain~ShowStatus HTTP/1.1 Host: rasnote User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en,de;q=0.7,en-us;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive and the server responds with: HTTP/1.1 401 Unauthorized Cache-Control: private Content-Type: text/html; charset=utf-8 Server: Microsoft-IIS/7.5 WWW-Authenticate: basic realm=rasnote" X-AspNet-Version: 2.0.50727 WWW-Authenticate: Negotiate WWW-Authenticate: NTLM WWW-Authenticate: Basic realm="rasnote" X-Powered-By: ASP.NET Date: Tue, 27 Oct 2009 00:58:20 GMT Content-Length: 5163 plus the actual error message body. The client then is responsible for re-sending the current request with the authentication token information provided (in this case Basic Auth): GET /wconnect/admin/wc.wc?_maintain~ShowStatus HTTP/1.1 Host: rasnote User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en,de;q=0.7,en-us;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cookie: TimeTrakker=2HJ1998WH06696; WebLogCommentUser=Rick Strahl|http://www.west-wind.com/|[email protected]; WebStoreUser=b8bd0ed9 Authorization: Basic cgsf12aDpkc2ZhZG1zMA== Once the authorization info is sent the server responds with the actual page result. Now if you use WebRequest (or WebClient) the default behavior is to re-authenticate on every request that requires authorization. This means if you look in  Fiddler or some other HTTP client Proxy that captures requests you’ll see that each request re-authenticates: Here are two requests fired back to back: and you can see the 401 challenge, the 200 response for both requests. If you watch this same conversation between a browser and a server you’ll notice that the first 401 is also there but the subsequent 401 requests are not present. WebRequest.PreAuthenticate And this is precisely what the WebRequest.PreAuthenticate property does: It’s a caching mechanism that caches the connection credentials for a given domain in the active process and resends it on subsequent requests. It does not send credentials on the first request but it will cache credentials on subsequent requests after authentication has succeeded: string url = "http://rasnote/wconnect/admin/wc.wc?_maintain~ShowStatus"; HttpWebRequest req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential("rick", "secret", "rasnote"); req.AuthenticationLevel = System.Net.Security.AuthenticationLevel.MutualAuthRequested; req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; WebResponse resp = req.GetResponse(); resp.Close(); req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential("rstrahl", "secret", "rasnote"); req.AuthenticationLevel = System.Net.Security.AuthenticationLevel.MutualAuthRequested; req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; resp = req.GetResponse(); which results in the desired sequence: where only the first request doesn’t send credentials. This is quite useful as it saves quite a few round trips to the server – bascially it saves one auth request request for every authenticated request you make. In most scenarios I think you’d want to send these credentials this way but one downside to this is that there’s no way to log out the client. Since the client always sends the credentials once authenticated only an explicit operation ON THE SERVER can undo the credentials by forcing another login explicitly (ie. re-challenging with a forced 401 request). Forcing Basic Authentication Credentials on the first Request On a few occasions I’ve needed to send credentials on a first request – mainly to some oddball third party Web Services (why you’d want to use Basic Auth on a Web Service is beyond me – don’t ask but it’s not uncommon in my experience). This is true of certain services that are using Basic Authentication (especially some Apache based Web Services) and REQUIRE that the authentication is sent right from the first request. No challenge first. Ugly but there it is. Now the following works only with Basic Authentication because it’s pretty straight forward to create the Basic Authorization ‘token’ in code since it’s just an unencrypted encoding of the user name and password into base64. As you might guess this is totally unsecure and should only be used when using HTTPS/SSL connections (i’m not in this example so I can capture the Fiddler trace and my local machine doesn’t have a cert installed, but for production apps ALWAYS use SSL with basic auth). The idea is that you simply add the required Authorization header to the request on your own along with the authorization string that encodes the username and password: string url = "http://rasnote/wconnect/admin/wc.wc?_maintain~ShowStatus"; HttpWebRequest req = HttpWebRequest.Create(url) as HttpWebRequest; string user = "rick"; string pwd = "secret"; string domain = "www.west-wind.com"; string auth = "Basic " + Convert.ToBase64String(System.Text.Encoding.Default.GetBytes(user + ":" + pwd)); req.PreAuthenticate = true; req.AuthenticationLevel = System.Net.Security.AuthenticationLevel.MutualAuthRequested;req.Headers.Add("Authorization", auth); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; WebResponse resp = req.GetResponse(); resp.Close(); This works and causes the request to immediately send auth information to the server. However, this only works with Basic Auth because you can actually create the authentication credentials easily on the client because it’s essentially clear text. The same doesn’t work for Windows or Digest authentication since you can’t easily create the authentication token on the client and send it to the server. Another issue with this approach is that PreAuthenticate has no effect when you manually force the authentication. As far as Web Request is concerned it never sent the authentication information so it’s not actually caching the value any longer. If you run 3 requests in a row like this: string url = "http://rasnote/wconnect/admin/wc.wc?_maintain~ShowStatus"; HttpWebRequest req = HttpWebRequest.Create(url) as HttpWebRequest; string user = "ricks"; string pwd = "secret"; string domain = "www.west-wind.com"; string auth = "Basic " + Convert.ToBase64String(System.Text.Encoding.Default.GetBytes(user + ":" + pwd)); req.PreAuthenticate = true; req.Headers.Add("Authorization", auth); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; WebResponse resp = req.GetResponse(); resp.Close(); req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential(user, pwd, domain); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; resp = req.GetResponse(); resp.Close(); req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential(user, pwd, domain); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; resp = req.GetResponse(); you’ll find the trace looking like this: where the first request (the one we explicitly add the header to) authenticates, the second challenges, and any subsequent ones then use the PreAuthenticate credential caching. In effect you’ll end up with one extra 401 request in this scenario, which is still better than 401 challenges on each request. Getting Access to WebRequest in Classic .NET Web Service Clients If you’re running a classic .NET Web Service client (non-WCF) one issue with the above is how do you get access to the WebRequest to actually add the custom headers to do the custom Authentication described above? One easy way is to implement a partial class that allows you add headers with something like this: public partial class TaxService { protected NameValueCollection Headers = new NameValueCollection(); public void AddHttpHeader(string key, string value) { this.Headers.Add(key,value); } public void ClearHttpHeaders() { this.Headers.Clear(); } protected override WebRequest GetWebRequest(Uri uri) { HttpWebRequest request = (HttpWebRequest) base.GetWebRequest(uri); request.Headers.Add(this.Headers); return request; } } where TaxService is the name of the .NET generated proxy class. In code you can then call AddHttpHeader() anywhere to add additional headers which are sent as part of the GetWebRequest override. Nice and simple once you know where to hook it. For WCF there’s a bit more work involved by creating a message extension as described here: http://weblogs.asp.net/avnerk/archive/2006/04/26/Adding-custom-headers-to-every-WCF-call-_2D00_-a-solution.aspx. FWIW, I think that HTTP header manipulation should be readily available on any HTTP based Web Service client DIRECTLY without having to subclass or implement a special interface hook. But alas a little extra work is required in .NET to make this happen Not a Common Problem, but when it happens… This has been one of those issues that is really rare, but it’s bitten me on several occasions when dealing with oddball Web services – a couple of times in my own work interacting with various Web Services and a few times on customer projects that required interaction with credentials-first services. Since the servers determine the protocol, we don’t have a choice but to follow the protocol. Lovely following standards that implementers decide to ignore, isn’t it? :-}© Rick Strahl, West Wind Technologies, 2005-2010Posted in .NET  CSharp  Web Services  

  Read the article

• Announcing the release of the Windows Azure SDK 2.1 for .NET

  - by ScottGu

  Today we released the v2.1 update of the Windows Azure SDK for .NET.  This is a major refresh of the Windows Azure SDK and it includes some great new features and enhancements. These new capabilities include: Visual Studio 2013 Preview Support: The Windows Azure SDK now supports using the new VS 2013 Preview Visual Studio 2013 VM Image: Windows Azure now has a built-in VM image that you can use to host and develop with VS 2013 in the cloud Visual Studio Server Explorer Enhancements: Redesigned with improved filtering and auto-loading of subscription resources Virtual Machines: Start and Stop VM’s w/suspend billing directly from within Visual Studio Cloud Services: New Emulator Express option with reduced footprint and Run as Normal User support Service Bus: New high availability options, Notification Hub support, Improved VS tooling PowerShell Automation: Lots of new PowerShell commands for automating Web Sites, Cloud Services, VMs and more All of these SDK enhancements are now available to start using immediately and you can download the SDK from the Windows Azure .NET Developer Center.  Visual Studio’s Team Foundation Service (http://tfs.visualstudio.com/) has also been updated to support today’s SDK 2.1 release, and the SDK 2.1 features can now be used with it (including with automated builds + tests). Below are more details on the new features and capabilities released today: Visual Studio 2013 Preview Support Today’s Window Azure SDK 2.1 release adds support for the recent Visual Studio 2013 Preview. The 2.1 SDK also works with Visual Studio 2010 and Visual Studio 2012, and works side by side with the previous Windows Azure SDK 1.8 and 2.0 releases. To install the Windows Azure SDK 2.1 on your local computer, choose the “install the sdk” link from the Windows Azure .NET Developer Center. Then, chose which version of Visual Studio you want to use it with.  Clicking the third link will install the SDK with the latest VS 2013 Preview: If you don’t already have the Visual Studio 2013 Preview installed on your machine, this will also install Visual Studio Express 2013 Preview for Web. Visual Studio 2013 VM Image Hosted in the Cloud One of the requests we’ve heard from several customers has been to have the ability to host Visual Studio within the cloud (avoiding the need to install anything locally on your computer). With today’s SDK update we’ve added a new VM image to the Windows Azure VM Gallery that has Visual Studio Ultimate 2013 Preview, SharePoint 2013, SQL Server 2012 Express and the Windows Azure 2.1 SDK already installed on it.  This provides a really easy way to create a development environment in the cloud with the latest tools. With the recent shutdown and suspend billing feature we shipped on Windows Azure last month, you can spin up the image only when you want to do active development, and then shut down the virtual machine and not have to worry about usage charges while the virtual machine is not in use. You can create your own VS image in the cloud by using the New->Compute->Virtual Machine->From Gallery menu within the Windows Azure Management Portal, and then by selecting the “Visual Studio Ultimate 2013 Preview” template: Visual Studio Server Explorer: Improved Filtering/Management of Subscription Resources With the Windows Azure SDK 2.1 release you’ll notice significant improvements in the Visual Studio Server Explorer. The explorer has been redesigned so that all Windows Azure services are now contained under a single Windows Azure node.  From the top level node you can now manage your Windows Azure credentials, import a subscription file or filter Server Explorer to only show services from particular subscriptions or regions. Note: The Web Sites and Mobile Services nodes will appear outside the Windows Azure Node until the final release of VS 2013. If you have installed the ASP.NET and Web Tools Preview Refresh, though, the Web Sites node will appear inside the Windows Azure node even with the VS 2013 Preview. Once your subscription information is added, Windows Azure services from all your subscriptions are automatically enumerated in the Server Explorer. You no longer need to manually add services to Server Explorer individually. This provides a convenient way of viewing all of your cloud services, storage accounts, service bus namespaces, virtual machines, and web sites from one location: Subscription and Region Filtering Support Using the Windows Azure node in Server Explorer, you can also now filter your Windows Azure services in the Server Explorer by the subscription or region they are in.  If you have multiple subscriptions but need to focus your attention to just a few subscription for some period of time, this a handy way to hide the services from other subscriptions view until they become relevant. You can do the same sort of filtering by region. To enable this, just select “Filter Services” from the context menu on the Windows Azure node: Then choose the subscriptions and/or regions you want to filter by. In the below example, I’ve decided to show services from my pay-as-you-go subscription within the East US region: Visual Studio will then automatically filter the items that show up in the Server Explorer appropriately: With storage accounts and service bus namespaces, you sometimes need to work with services outside your subscription. To accommodate that scenario, those services allow you to attach an external account (from the context menu). You’ll notice that external accounts have a slightly different icon in server explorer to indicate they are from outside your subscription. Other Improvements We’ve also improved the Server Explorer by adding additional properties and actions to the service exposed. You now have access to most of the properties on a cloud service, deployment slot, role or role instance as well as the properties on storage accounts, virtual machines and web sites. Just select the object of interest in Server Explorer and view the properties in the property pane. We also now have full support for creating/deleting/update storage tables, blobs and queues from directly within Server Explorer.  Simply right-click on the appropriate storage account node and you can create them directly within Visual Studio: Virtual Machines: Start/Stop within Visual Studio Virtual Machines now have context menu actions that allow you start, shutdown, restart and delete a Virtual Machine directly within the Visual Studio Server Explorer. The shutdown action enables you to shut down the virtual machine and suspend billing when the VM is not is use, and easily restart it when you need it: This is especially useful in Dev/Test scenarios where you can start a VM – such as a SQL Server – during your development session and then shut it down / suspend billing when you are not developing (and no longer be billed for it). You can also now directly remote desktop into VMs using the “Connect using Remote Desktop” context menu command in VS Server Explorer.  Cloud Services: Emulator Express with Run as Normal User Support You can now launch Visual Studio and run your cloud services locally as a Normal User (without having to elevate to an administrator account) using a new Emulator Express option included as a preview feature with this SDK release.  Emulator Express is a version of the Windows Azure Compute Emulator that runs a restricted mode – one instance per role – and it doesn’t require administrative permissions and uses 40% less resources than the full Windows Azure Emulator. Emulator Express supports both web and worker roles. To run your application locally using the Emulator Express option, simply change the following settings in the Windows Azure project. On the shortcut menu for the Windows Azure project, choose Properties, and then choose the Web tab. Check the setting for IIS (Internet Information Services). Make sure that the option is set to IIS Express, not the full version of IIS. Emulator Express is not compatible with full IIS. On the Web tab, choose the option for Emulator Express. Service Bus: Notification Hubs With the Windows Azure SDK 2.1 release we are adding support for Windows Azure Notification Hubs as part of our official Windows Azure SDK, inside of Microsoft.ServiceBus.dll (previously the Notification Hub functionality was in a preview assembly). You are now able to create, update and delete Notification Hubs programmatically, manage your device registrations, and send push notifications to all your mobile clients across all platforms (Windows Store, Windows Phone 8, iOS, and Android). Learn more about Notification Hubs on MSDN here, or watch the Notification Hubs //BUILD/ presentation here. Service Bus: Paired Namespaces One of the new features included with today’s Windows Azure SDK 2.1 release is support for Service Bus “Paired Namespaces”.  Paired Namespaces enable you to better handle situations where a Service Bus service namespace becomes unavailable (for example: due to connectivity issues or an outage) and you are unable to send or receive messages to the namespace hosting the queue, topic, or subscription. Previously,to handle this scenario you had to manually setup separate namespaces that can act as a backup, then implement manual failover and retry logic which was sometimes tricky to get right. Service Bus now supports Paired Namespaces, which enables you to connect two namespaces together. When you activate the secondary namespace, messages are stored in the secondary queue for delivery to the primary queue at a later time. If the primary container (namespace) becomes unavailable for some reason, automatic failover enables the messages in the secondary queue. For detailed information about paired namespaces and high availability, see the new topic Asynchronous Messaging Patterns and High Availability. Service Bus: Tooling Improvements In this release, the Windows Azure Tools for Visual Studio contain several enhancements and changes to the management of Service Bus messaging entities using Visual Studio’s Server Explorer. The most noticeable change is that the Service Bus node is now integrated into the Windows Azure node, and supports integrated subscription management. Additionally, there has been a change to the code generated by the Windows Azure Worker Role with Service Bus Queue project template. This code now uses an event-driven “message pump” programming model using the QueueClient.OnMessage method. PowerShell: Tons of New Automation Commands Since my last blog post on the previous Windows Azure SDK 2.0 release, we’ve updated Windows Azure PowerShell (which is a separate download) five times. You can find the full change log here. We’ve added new cmdlets in the following areas: China instance and Windows Azure Pack support Environment Configuration VMs Cloud Services Web Sites Storage SQL Azure Service Bus China Instance and Windows Azure Pack We now support the following cmdlets for the China instance and Windows Azure Pack, respectively: China Instance: Web Sites, Service Bus, Storage, Cloud Service, VMs, Network Windows Azure Pack: Web Sites, Service Bus We will have full cmdlet support for these two Windows Azure environments in PowerShell in the near future. Virtual Machines: Stop/Start Virtual Machines Similar to the Start/Stop VM capability in VS Server Explorer, you can now stop your VM and suspend billing: If you want to keep the original behavior of keeping your stopped VM provisioned, you can pass in the -StayProvisioned switch parameter. Virtual Machines: VM endpoint ACLs We’ve added and updated a bunch of cmdlets for you to configure fine-grained network ACL on your VM endpoints. You can use the following cmdlets to create ACL config and apply them to a VM endpoint: New-AzureAclConfig Get-AzureAclConfig Set-AzureAclConfig Remove-AzureAclConfig Add-AzureEndpoint -ACL Set-AzureEndpoint –ACL The following example shows how to add an ACL rule to an existing endpoint of a VM. Other improvements for Virtual Machine management includes Added -NoWinRMEndpoint parameter to New-AzureQuickVM and Add-AzureProvisioningConfig to disable Windows Remote Management Added -DirectServerReturn parameter to Add-AzureEndpoint and Set-AzureEndpoint to enable/disable direct server return Added Set-AzureLoadBalancedEndpoint cmdlet to modify load balanced endpoints Cloud Services: Remote Desktop and Diagnostics Remote Desktop and Diagnostics are popular debugging options for Cloud Services. We’ve introduced cmdlets to help you configure these two Cloud Service extensions from Windows Azure PowerShell. Windows Azure Cloud Services Remote Desktop extension: New-AzureServiceRemoteDesktopExtensionConfig Get-AzureServiceRemoteDesktopExtension Set-AzureServiceRemoteDesktopExtension Remove-AzureServiceRemoteDesktopExtension Windows Azure Cloud Services Diagnostics extension New-AzureServiceDiagnosticsExtensionConfig Get-AzureServiceDiagnosticsExtension Set-AzureServiceDiagnosticsExtension Remove-AzureServiceDiagnosticsExtension The following example shows how to enable Remote Desktop for a Cloud Service. Web Sites: Diagnostics With our last SDK update, we introduced the Get-AzureWebsiteLog –Tail cmdlet to get the log streaming of your Web Sites. Recently, we’ve also added cmdlets to configure Web Site application diagnostics: Enable-AzureWebsiteApplicationDiagnostic Disable-AzureWebsiteApplicationDiagnostic The following 2 examples show how to enable application diagnostics to the file system and a Windows Azure Storage Table: SQL Database Previously, you had to know the SQL Database server admin username and password if you want to manage the database in that SQL Database server. Recently, we’ve made the experience much easier by not requiring the admin credential if the database server is in your subscription. So you can simply specify the -ServerName parameter to tell Windows Azure PowerShell which server you want to use for the following cmdlets. Get-AzureSqlDatabase New-AzureSqlDatabase Remove-AzureSqlDatabase Set-AzureSqlDatabase We’ve also added a -AllowAllAzureServices parameter to New-AzureSqlDatabaseServerFirewallRule so that you can easily add a firewall rule to whitelist all Windows Azure IP addresses. Besides the above experience improvements, we’ve also added cmdlets get the database server quota and set the database service objective. Check out the following cmdlets for details. Get-AzureSqlDatabaseServerQuota Get-AzureSqlDatabaseServiceObjective Set-AzureSqlDatabase –ServiceObjective Storage and Service Bus Other new cmdlets include Storage: CRUD cmdlets for Azure Tables and Queues Service Bus: Cmdlets for managing authorization rules on your Service Bus Namespace, Queue, Topic, Relay and NotificationHub Summary Today’s release includes a bunch of great features that enable you to build even better cloud solutions.  All the above features/enhancements are shipped and available to use immediately as part of the 2.1 release of the Windows Azure SDK for .NET. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today.  Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• CodePlex Daily Summary for Friday, August 17, 2012

  CodePlex Daily Summary for Friday, August 17, 2012Popular ReleasesXDA ROM HUB: Release v0.9.1: Fixed issue: "Can't recognize device, please try again" IMPORTENT! You MUST install this software in a path WITHOUT spaces, Good example: "C:\Users\Max\Documents" Please note that I lost the source code, so I can't update this softwareDotNetNuke® Feedback: 06.02.01: Official Release - 17th August 2012 Please look at the Release Notes file included in the module packages or available on this page as a separate download for a listing of the bug fixes and enhancements found in this version. NOTE: Feedback v 06.02.00 REQUIRES a minimum DotNetNuke framework version of 06.02.00 as well as ASP.Net 3.5 SP1 and MS SQL Server 2005 or 2008 (Express or standard versions). This release brings some enhancements to the module as well as fixing all known bugs. Bug Fi...fastJSON: v2.0.2: - bug fix $types and arraysDatabase View-plug-ins Programming Helper: Database View-plug-ins 1.2 (for Oracle): The download package consists of deployment SQL scripts. Run every scripts of all subdirectories in order (sort by name). "VPI" is the default schema name in the manifest, it can be changed to other name according to your enterprise database policy. Current release is for Oracle version (SQL Server version will be released later).Everybody Edits Account Manager: EEAccMan 1.1: Fixed: Incompatibility with the newest chrome version (v21)WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.7: Version: 2.5.0.7 (Milestone 7): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Add CollectionHelper.GetNextElementOrDefault method. InfoMan: Support creating a new email and saving it in the Send b...Diablo III Drop Statistics Service: D3DSS 1.0.1: ??????IP??。 ??????????，??????????。myCollections: Version 2.2.3.0: New in this version : Added setup package. Added Amazon Spain for Apps, Books, Games, Movie, Music, Nds and Tvshow. Added TVDB Spain for Tvshow. Added TMDB Spain for Movies. Added Auto rename files from title. Added more filters when adding files (vob,mpls,ifo...) Improve Books author and Music Artist Credits. Rewrite find duplicates for better performance. You can now add Custom link to items. You can now add type directly from the type list using right mouse button. Bug ...mydnn: DNN Garden - DDR Menu for DotNetNuke: ?? ??? ??? ???? ?? ???? ??????? ?? DDR Menu ?? ?? ????? ??? DNN ?? ??????. ??? ??? ?? ???? ??? ?????? ???? ??????? ???? ?? ????. ?? ????? ?? ????? ??????? ?????? SolPart ?? DNN Nav ??? ???? ????? ????? ?? ??????? ???? ?? ???? ??? CSS ????? ????. ?? ??? ??? ?????? ???? ??? ?? ??? ????? ??? ?? ?????? ?? jQuery ? CSS ????? ???? ????. ??? ???? ?? ???? Treeview ? Superfish? Accordion ? Dropdown ?Artisteer ? Mega-menu ?? ????.Player Framework by Microsoft: Player Framework for Windows 8 Preview 5 (Refresh): Support for Windows 8 and Visual Studio RTM Support for Smooth Streaming SDK beta 2 Support for live playback New bitrate meter and SD/HD indicators Auto smooth streaming track restriction for snapped mode to conserve bandwidth New "Go Live" button and SeekToLive API Support for offset start times Support for Live position unique from end time Support for multiple audio streams (smooth and progressive content) Improved intellisense in JS version NEW TO PREVIEW 5 REFRESH:Req...TFS Workbench: TFS Workbench v2.2.0.10: Compiled installers for TFS Workbench 2.2.0.10 Bug Fix Fixed bug that stopped the change workspace action from working.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.60: Allow for CSS3 grid-column and grid-row repeat syntax. Provide option for -analyze scope-report output to be in XML for easier programmatic processing; also allow for report to be saved to a separate output file.ClosedXML - The easy way to OpenXML: ClosedXML 0.67.2: v0.67.2 Fix when copying conditional formats with relative formulas v0.67.1 Misc fixes to the conditional formats v0.67.0 Conditional formats now accept formulas. Major performance improvement when opening files with merged ranges. Misc fixes.Umbraco CMS: Umbraco 4.8.1: Whats newBug fixes: Fixed: When upgrading to 4.8.0, the database upgrade didn't run Update: unfortunately, upgrading with SQLCE is problematic, there's a workaround here: http://bit.ly/TEmMJN The changes to the <imaging> section in umbracoSettings.config caused errors when you didn't apply them during the upgrade. Defaults will now be used if any keys are missing Scheduled unpublishes now only unpublishes nodes set to published rather than newest Work item: 30937 - Fixed problem with Fi...patterns & practices - Unity: Unity 3.0 for .NET 4.5 and WinRT - Preview: The Unity 3.0.1208.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. This is an updated version of the port after the .NET Framework 4.5 and Windows 8 have RTM'ed. Please see the Release Notes Providing feedback Post your feedback on the Unity forum Submit and vote on new features for Unity on our Uservoice site.Self-Tracking Entity Generator for WPF and Silverlight: Self-Tracking Entity Generator v 2.0.0 for VS11: Self-Tracking Entity Generator for WPF and Silverlight v 2.0.0 for Entity Framework 5.0 and Visual Studio 2012NPOI: NPOI 2.0: New features a. Implement OpenXml4Net (same as System.Packaging from Microsoft). It supports both .NET 2.0 and .NET 4.0 b. Excel 2007 read/write library (NPOI.XSSF) c. Word 2007 read/write library(NPOI.XWPF) d. NPOI.SS namespace becomes the interface shared between XSSF and HSSF e. Load xlsx template and save as new xlsx file (partially supported) f. Diagonal line in cell both in xls and xlsx g. Support isRightToLeft and setRightToLeft on the common spreadsheet Sheet interface, as per existin...BugNET Issue Tracker: BugNET 1.1: This release includes bug fixes from the 1.0 release for email notifications, RSS feeds, and several other issues. Please see the change log for a full list of changes. http://support.bugnetproject.com/Projects/ReleaseNotes.aspx?pid=1&m=76 Upgrade Notes The following changes to the web.config in the profile section have occurred: Removed <add name="NotificationTypes" type="String" defaultValue="Email" customProviderData="NotificationTypes;nvarchar;255" />Added <add name="ReceiveEmailNotifi...????: ????2.0.5: 1、?????????????。RiP-Ripper & PG-Ripper: PG-Ripper 1.4.01: changes NEW: Added Support for Clipboard Function in Mono Version NEW: Added Support for "ImgBox.com" links FIXED: "PixHub.eu" links FIXED: "ImgChili.com" links FIXED: Kitty-Kats Forum loginNew ProjectsAdvanced Task Manager: The Advanced Task Manager is a beautified and easy-to-use Task Manager for Windows, with even a few added features!CashBook: CashBook public beta release. Collect basic information on cashflow in and out of your organisation for your bookkeeper.Digital Image: Projeto academico de código aberto com o propósito de auxiliar na aprendizagem da Computação Gráfica. Desenvolvimento utilizando: C#, ASP .NET MVC e NHibernateFgPop: FgPop is a JQuery script generator starting from FgPop class properties you set. HDI Charts: A Charting Library for ASP.NET with Gantt, Line and Bar Charts. Possibility to draw Calculated Graphs, eg: x² or Interview Test: Interview Testing ProjectMeotom.Net: Meotom.Net is free upload image ...MetroCloud: Sync your cloudMissing Poster: Missing Poster is a tool to assist SAR and police to create and distribute missing person posters in a standardized format. OMAOL Sealer: Der OMAOL Stealer ist ein open source Stealer in C#. Zur Ausführung wird das .Net Framework 2.0 benötigt.Planar Mechanism Kinematic Simulator (PMKS): PMKS returns quick and accurate results for the position, velocity, and acceleration of rigid bodies connected as planar mechanisms.Real Life Library: Using this library, you will be able to make your own simulation of the real life! Just for fun.Smart String Resources: Creates a class to access resx strings with named parameters and provides access to the resource keys to use with attribute-based validations.testdd08162012hg: dfvtestdd08162012tfs01: dsftestddgit08152012: ,.,.testddgit0816201201: vbtesthg08192012hg01: dsTQ Sharepoint 2010 Twitter Feeds webpart: TQ Sharepoint 2010 Twitter Feeds webpart No credential required this webpart searches public tweets based on keyword/topic/trend.Vortex: Vortex is a simple asynchronous network library written in C#, for ease of use and rapid application development.WakeUp SharePoint 2010/2013 with powershell: It also works with ADFS and claims.Windows Azure + SQL Azure Monitoring: Simple Azuer app demonstrating how to add basic monitoring for troubleshooting.WPFP - XPS Document Layouting and Generation: XPS Document Layouting and GenerationXBDesign: a test project onlyYacht Transport Lines: Yacht Transport Lines

  Read the article

• CodePlex Daily Summary for Tuesday, February 22, 2011

  CodePlex Daily Summary for Tuesday, February 22, 2011Popular ReleasesSearchable Property Updater for Microsoft Dynamics CRM 2011: Searchable Property Updater (1.0.121.59): Initial releaseJHINFORM7: JHINFORM 7 VR. 0.0.2: Versión 0.0.1 En estado de desarrolloSilverlight????[???]: silverlight????[???]2.0: ???????，?????，????????silverlight????。DBSourceTools: DBSourceTools_1.3.0.0: Release 1.3.0.0 Changed editors from FireEdit to ICSharpCode.TextEditor. Complete re-vamp of Intellisense ( further testing needed). Hightlight Field and Table Names in sql scripts. Added field dropdown on all tables and views in DBExplorer. Added data option for viewing data in Tables. Fixed comment / uncomment bug as reported by tareq. Included Synonyms in scripting engine ( nickt_ch ).IronPython: 2.7 Release Candidate 1: We are pleased to announce the first Release Candidate for IronPython 2.7. This release contains over two dozen bugs fixed in preparation for 2.7 Final. See the release notes for 60193 for details and what has already been fixed in the earlier 2.7 prereleases. - IronPython TeamCaliburn Micro: A Micro-Framework for WPF, Silverlight and WP7: Caliburn.Micro 1.0 RC: This is the official Release Candicate for Caliburn.Micro 1.0. The download contains the binaries, samples and VS templates. VS Templates The templates included are designed for situations where the Caliburn.Micro source needs to be embedded within a single project solution. This was targeted at government and other organizations that expressed specific requirements around using an open source project like this. NuGet This release does not have a corresponding NuGet package. The NuGet pack...Caliburn: A Client Framework for WPF and Silverlight: Caliburn 2.0 RC: This is the official Release Candidate for Caliburn 2.0. It contains all binaries, samples and generated code docs.A2Command: 2011-02-21 - Version 1.0: IntroductionThis is the full release version of A2Command 1.0, dated February 21, 2011. These notes supersede any prior version's notes. All prior releases may be found on the project's website at http://a2command.codeplex.com/releases/ where you can read the release notes for older versions as well as download them. This version of A2Command is intended to replace any previous version you may have downloaded in the past. There were several bug fixes made after Release Candidate 2 and all...Chiave File Encryption: Chiave 0.9: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Feedbacks are Welcome!....Rawr: Rawr 4.0.20 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...Azure Storage Samples: Version 1.0 (February 2011): These downloads contain source code. Each is a complete sample that fully exercises Windows Azure Storage across blobs, queues, and tables. The difference between the downloads is implementation approach. Storage DotNet CS.zip is a .NET StorageClient library implementation in the C# language. This library come with the Windows Azure SDK. Contains helper classes for accessing blobs, queues, and tables. Storage REST CS.zip is a REST implementation in the C# language. The code to implement R...MiniTwitter: 1.66: MiniTwitter 1.66 ???? ?? ?????????? 2 ??????????????????? User Streams ?????????Windows Phone 7 Isolated Storage Explorer: WP7 Isolated Storage Explorer v1.0 Beta: Current release features:WPF desktop explorer client Visual Studio integrated tool window explorer client (Visual Studio 2010 Professional and above) Supported operations: Refresh (isolated storage information), Add Folder, Add Existing Item, Download File, Delete Folder, Delete File Explorer supports operations running on multiple remote applications at the same time Explorer detects application disconnect (1-2 second delay) Explorer confirms operation completed status Explorer d...Document.Editor: 2011.6: Whats new for Document.Editor 2011.6: New Left to Right and Left to Right support New Indent more/less support Improved Home tab Improved Tooltips/shortcut keys Minor Bug Fix's, improvements and speed upsCatel - WPF and Silverlight MVVM library: 1.2: Catel history ============= (+) Added (*) Changed (-) Removed (x) Error / bug (fix) For more information about issues or new feature requests, please visit: http://catel.codeplex.com =========== Version 1.2 =========== Release date: ============= 2011/02/17 Added/fixed: ============ (+) DataObjectBase now supports Isolated Storage out of the box: Person.Save(myStream) stores a whole object graph in Silverlight (+) DataObjectBase can now be converted to Json via Person.ToJson(); (+)...??????????: All-In-One Code Framework ??? 2011-02-18: ?????All-In-One Code Framework?2011??????????！！http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????，?????AzureBingMaps??????，??Azure，WCF, Silverlight, Window Phone????????，????????????????????????。 ???： Windows Azure SQL Azure Windows Azure AppFabric Windows Live Messenger Connect Bing Maps ?????： ??????HTML??? ??Windows PC?Mac?Silverlight??? ??Windows Phone?Silverlight??? ?????：http://blog.csdn.net/sjb5201/archive/2011...Image.Viewer: 2011: First version of 2011Silverlight Toolkit: Silverlight for Windows Phone Toolkit - Feb 2011: Silverlight for Windows Phone Toolkit OverviewSilverlight for Windows Phone Toolkit offers developers additional controls for Windows Phone application development, designed to match the rich user experience of the Windows Phone 7. Suggestions? Features? Questions? Ask questions in the Create.msdn.com forum. Add bugs or feature requests to the Issue Tracker. Help us shape the Silverlight Toolkit with your feedback! Please clearly indicate that the work items and issues are for the phone t...thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.11): Features Added a new option that allows properties on data contract types to be marked as virtual. Bug Fixes Fixed a bug caused by certain project properties not being available on Web Service Software Factory projects. Fixed a bug that could result in the WrapperName value of the MessageContractAttribute being incorrect when the Adjust Casing option is used. The menu item code now caters for CommandBar instances that are not available. For example the Web Item CommandBar does not exist ...Terminals: Version 2 - RC1: The Third build includes the fix for NLA support. A merged in patch dropped the UI support. Its back now. All patch's except 1 are left. Cheers, -Rob The Second build is up. It takes most patch's sent in from the community. One such patch was around security & how the application handles Passwords. You may find that all of your passwords are now invalidated. You may need to reenter all of your credentials. This would be a good time to use the Credential Manager for each connecti...New ProjectsAllTalk: This is a chat client for Windows Phone 7.AssertFramework: AssertFramework is an implementation of Visual Studio/MSTest assert classes. The Asset and StringAssert classes have been implemented so far. CollectionAssert will be implemented next.AsyncInRuby: Async Web Development in RubyAuto Numbering for CRM 4.0: Reuse and standardize Auto Numbering for CRM 4.0BitRaise: Raise money bit by bit!BoxGame: BoxGame is a small project to develop a RPG in XNA.CCI Explorer (An alternative of .NET Reflector): CCI Explorer is an alternative to RedGate Reflector. It use the Microsoft Common Compiler Infrastructure to decompil and view source executable code. The application is writing in WPF and use the MVVM pattern.Configuration Manager Client Health Check Tool: There are many pitfalls with maintaining ConfigMgr managed systems so they install the client software and can continuously report to the hierarchy. This project provides a scripted solution that detects many issues and automates their repair.cppERF: Class ERF function. Test on VC++ 2008 express, and cygwin.CUITe (Coded UI Test enhanced) Framework: CUITe (Coded UI Test enhanced) Framework is a thin layer developed on top of Microsoft Visual Studio Team Test's Coded UI Test engine which helps reduce code, increases readability and maintainability, while also providing a bunch of cool features for the automation engineer.DocMetaMan : Bulk document Upload and MetaData (Taxonomy) Setter: DocMetaMap lets user select a root folder and upload the documents to selected document library in SharePoint 2010. The tool presents a nice GUI prompting the user to select the metadata / taxonomy to be associated with the documents before uploading them to SharePoint. DotNetNuke Azure Accelerator: DNN Azure Accelerator is a project based on the Azure Accelerators Project to publish the famous DotNetNuke Community CMS in the Windows Azure Platform.GK PlatyPi Robotics - Team 2927: Graham-Kapowsin HS Robotics Club's code repository.HgReport: This is a Mercurial reporting engine written in .NET 3.5. The program will allow you to write your own report templates and execute them against a local Mercurial repository to produce text reports, including HTML, with statistics and other items from the repository history.Image Steganography: 'Image Steganography' allows you to embed text and files into images, with optional encryption.im-me-messenger: A simple instant messenger application for the IM-ME messenging gadgetISEFun: PowerShell module(s) to simplify work in it. It contains PowerShell scripts, compiled libs and some formating files. Several modules will come in one batch as optional features.Kailua - The forgotten methods in the ADO.NET API.: Provide standard calls for vendor specific functionality through ADO.NET. Additional functionality includes: enumerate databases, tables, views, columns, stored procedures, parameters; get an autogenerated primary key; return top N rows; and more. Also some non-ADO classes.Linkual: Linkual makes it easier for blog authors to publish their articles in multiple languages. They will no longer have to set up a separate blog for each language. It is developed in C# and ASP.NET MVC.Lumen - Index discovery and querying: Index discovery and querying framework based on Lucene.netMars Rover Exercise: A squad of robotic rovers are to be landed by NASA on a plateau on Mars. This plateau, which is curiously rectangular, must be navigated by the rovers so that their on board cameras can get a complete view of the surrounding terrain to send back to Earth. Message splitting envelope in Biztalk 2009: Message splitting envelope in Biztalk 2009. The project contains: Source code, Examples. Article describing how to develop it: http://www.biztalkbrasil.com.br/2011/02/envelope-sample-using-flat-file.html.Microsoft Dynamics CRM 2011 Development Framework: Framework for developing Microsoft Dynamics CRM 2011 Applications.Potluck Central: Event Manger is a simple place were you can manage your potlucks.PowerSqueakTasks: For now PowerSqueakTasks primary goal is to integrate MsBuild with Powershell. It provides one simple task, that executes Powershell script in a batch manner - creates PS variables using MSBuild item metadata and then runs specified script over them.PSS Airbus Sound Extender: This application offers users of PSS Airbus the sound extension (like electricity, air-conditioning, apu) for standard PSS Airbus 32x planes. Tested with FS2004 and PSS A319. No sound files are distribute with the package, but explaining manual, how to achieve them, is included.SCCM Client Center Automation Library: SCCM Client Automation library (previously smsclictr.automation.dll) is a .NET Library (C#) to automate and access SCCM (Microsoft System Center Configuration Manager) 2007 Agent functions over WMI.Seng 401 Awesome TSS: Telephone switching system for SENG401 course project. Developed in Visual C#.Silverlight????[???]: flyer???????????，????????。????????silverlight??????????。Simple Notify: SimpleNotify is a lightweight client-server implementation that allows you to notify many users in your network with custom messages in a very simple way. There are a couple of ways how you want to push these messages to your clients. SimpleNotify is developed in C#.Slingshot: SlingshotSmartTTS: A smart text to speech app!SystemSoupRMS: SaaS RMStest project101: test source controlUse BizTalk Logging Events in BizUnit Tests: This project will demonstrate how to use the instrumentation from the Microsoft BizTalk CAT Team logging framework to help you test the internals of your BizTalk solutionWalkme HealthVault Application: Walking application for HealthVault.WikiChanges: WikiChanges is a "Recent Changes" monitor for MediaWiki installations that uses non-intrusive, non-annoying yet useful notifications on the corner with link shortcuts to pages, diff, hist, undo and various other links.Win4 Movie Project: This application is being developed for a class group projectWPF UI Authorization infrastructure (MVVM controlled): This infrastructure provide Attribute base authorization for UI elements within WPF applications

  Read the article

• Securing an ADF Application using OES11g: Part 2

  - by user12587121

  To validate the integration with OES we need a sample ADF Application that is rich enough to allow us to test securing the various ADF elements.  To achieve this we can add some items including bounded task flows to the application developed in this tutorial. A sample JDeveloper 11.1.1.6 project is available here. It depends on the Fusion Order Demo (FOD) database schema which is easily created using the FOD build scripts.In the deployment we have chosen to enable only ADF Authentication as we will delegate Authorization, mostly, to OES.The welcome page of the application with all the links exposed looks as follows: The Welcome, Browse Products, Browse Stock and System Administration links go to pages while the Supplier Registration and Update Stock are bounded task flows.  The Login link goes to a basic login page and once logged in a link is presented that goes to a logout page.  Only the Browse Products and Browse Stock pages are really connected to the database--the other pages and task flows do not really perform any operations on the database. Required Security Policies We make use of a set of test users and roles as decscribed on the welcome page of the application.  In order to exercise the different authorization possibilities we would like to enforce the following sample policies: Anonymous users can see the Login, Welcome and Supplier Registration links. They can also see the Welcome page, the Login page and follow the Supplier Registration task flow.  They can see the icon adjacent to the Login link indicating whether they have logged in or not. Authenticated users can see the Browse Product page. Only staff granted the right can see the Browse Product page cost price value returned from the database and then only if the value is below a configurable limit. Suppliers and staff can see the Browse Stock links and pages.  Customers cannot. Suppliers can see the Update Stock link but only those with the update permission are allowed to follow the task flow that it launches.  We could hide the link but leave it exposed here so we can easily demonstrate the method call activity protecting the task flow. Only staff granted the right can see the System Administration link and the System Administration page it accesses. Implementing the required policies In order to secure the application we will make use of the following techniques: EL Expressions and Java backing beans: JSF has the notion of EL expressions to reference data from backing Java classes.  We use these to control the presentation of links on the navigation page which respect the security contraints.  So a user will not see links that he is not allowed to click on into. These Java backing beans can call on to OES for an authorization decision.  Important Note: naturally we would configure the WLS domain where our ADF application is running as an OES WLS SM, which would allow us to efficiently query OES over the PEP API.  However versioning conflicts between OES 11.1.1.5 and ADF 11.1.1.6 mean that this is not possible.  Nevertheless, we can make use of the OES RESTful gateway technique from this posting in order to call into OES. You can easily create and manage backing beans in Jdeveloper as follows: Custom ADF Phase Listener: ADF extends the JSF page lifecycle flow and allows one to hook into the flow to intercept page rendering.  We use this to put a check prior to rendering any protected pages, again calling on to OES via the backing bean.  Phase listeners are configured in the adf-settings.xml file.  See the MyPageListener.java class in the project.  Here, for example,  is the code we use in the listener to check for allowed access to the sysadmin page, navigating back to the welcome page if authorization is not granted:                         if (page != null && (page.equals("/system.jspx") || page.equals("/system"))){                             System.out.println("MyPageListener: Checking Authorization for /system");                             if (getValue("#{oesBackingBean.UIAccessSysAdmin}").toString().equals("false") ){                                   System.out.println("MyPageListener: Forcing navigation away from system" +                                       "to welcome");                                 NavigationHandler nh = fc.getApplication().getNavigationHandler();                                   nh.handleNavigation(fc, null, "welcome");                               } else {                                 System.out.println("MyPageListener: access allowed");                              }                         } Method call activity: our app makes use of bounded task flows to implement the sequence of pages that update the stock or allow suppliers to self register.  ADF takes care of ensuring that a bounded task flow can be entered by only one page.  So a way to protect all those pages is to make a call to OES in the first activity and then either exit the task flow or continue depending on the authorization decision.  The method call returns a String which contains the name of the transition to effect. This is where we configure the method call activity in JDeveloper: We implement each of the policies using the above techniques as follows: Policies 1 and 2: as these policies concern the coarse grained notions of controlling access to anonymous and authenticated users we can make use of the container’s security constraints which can be defined in the web.xml file.  The allPages constraint is added automatically when we configure Authentication for the ADF application.  We have added the “anonymousss” constraint to allow access to the the required pages, task flows and icons: <security-constraint>    <web-resource-collection>      <web-resource-name>anonymousss</web-resource-name>      <url-pattern>/faces/welcome</url-pattern>      <url-pattern>/afr/*</url-pattern>      <url-pattern>/adf/*</url-pattern>      <url-pattern>/key.png</url-pattern>      <url-pattern>/faces/supplier-reg-btf/*</url-pattern>      <url-pattern>/faces/supplier_register_complete</url-pattern>    </web-resource-collection>  </security-constraint> Policy 3: we can place an EL expression on the element representing the cost price on the products.jspx page: #{oesBackingBean.dataAccessCostPrice}. This EL Expression references a method in a Java backing bean that will call on to OES for an authorization decision.  In OES we model the authorization requirement by requiring the view permission on the resource /MyADFApp/data/costprice and granting it only to the staff application role.  We recover any obligations to determine the limit.  Policy 4: is implemented by putting an EL expression on the Browse Stock link #{oesBackingBean.UIAccessBrowseStock} which checks for the view permission on the /MyADFApp/ui/stock resource. The stock.jspx page is protected by checking for the same permission in a custom phase listener—if the required permission is not satisfied then we force navigation back to the welcome page. Policy 5: the Update Stock link is protected with the same EL expression as the Browse Link: #{oesBackingBean.UIAccessBrowseStock}.  However the Update Stock link launches a bounded task flow and to protect it the first activity in the flow is a method call activity which will execute an EL expression #{oesBackingBean.isUIAccessSupplierUpdateTransition}  to check for the update permission on the /MyADFApp/ui/stock resource and either transition to the next step in the flow or terminate the flow with an authorization error. Policy 6: the System Administration link is protected with an EL Expression #{oesBackingBean.UIAccessSysAdmin} that checks for view access on the /MyADF/ui/sysadmin resource.  The system page is protected in the same way at the stock page—the custom phase listener checks for the same permission that protects the link and if not satisfied we navigate back to the welcome page. Testing the Application To test the application: deploy the OES11g Admin to a WLS domain deploy the OES gateway in a another domain configured to be a WLS SM. You must ensure that the jps-config.xml file therein is configured to allow access to the identity store, otherwise the gateway will not b eable to resolve the principals for the requested users.  To do this ensure that the following elements appear in the jps-config.xml file: <serviceProvider type="IDENTITY_STORE" name="idstore.ldap.provider" class="oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider">             <description>LDAP-based IdentityStore Provider</description>  </serviceProvider> <serviceInstance name="idstore.ldap" provider="idstore.ldap.provider">             <property name="idstore.config.provider" value="oracle.security.jps.wls.internal.idstore.WlsLdapIdStoreConfigProvider"/>             <property name="CONNECTION_POOL_CLASS" value="oracle.security.idm.providers.stdldap.JNDIPool"/></serviceInstance> <serviceInstanceRef ref="idstore.ldap"/> download the sample application and change the URL to the gateway in the MyADFApp OESBackingBean code to point to the OES Gateway and deploy the application to an 11.1.1.6 WLS domain that has been extended with the ADF JRF files. You will need to configure the FOD database connection to point your database which contains the FOD schema. populate the OES Admin and OES Gateway WLS LDAP stores with the sample set of users and groups.  If  you have configured the WLS domains to point to the same LDAP then it would only have to be done once.  To help with this there is a directory called ldap_scripts in the sample project with ldif files for the test users and groups. start the OES Admin console and configure the required OES authorization policies for the MyADFApp application and push them to the WLS SM containing the OES Gateway. Login to the MyADFApp as each of the users described on the login page to test that the security policy is correct. You will see informative logging from the OES Gateway and the ADF application to their respective WLS consoles. Congratulations, you may now login to the OES Admin console and change policies that will control the behaviour of your ADF application--change the limit value in the obligation for the cost price for example, or define Role Mapping policies to determine staff access to the system administration page based on user profile attributes. ADF Development Notes Some notes on ADF development which are probably typical gotchas: May need this on WLS startup in order to allow us to overwrite credentials for the database, the signal here is that there is an error trying to access the data base: -Djps.app.credential.overwrite.allowed=true Best to call Bounded Task flows via a CommandLink (as opposed to a go link) as you cannot seem to start them again from a go link, even having completed the task flow correctly with a return activity. Once a bounded task flow (BTF) is initated it must complete correctly  via a return activity—attempting to click on any other link whilst in the context of a  BTF has no effect.  See here for example: When using the ADF Authentication only security approach it seems to be awkward to allow anonymous access to the welcome and registration pages.  We can achieve anonymous access using the web.xml security constraint shown above (where no auth-constraint is specified) however it is not clear what needs to be listed in there….for example the /afr/* and /adf/* are in there by trial and error as sometimes the welcome page will not render if we omit those items.  I was not able to use the default allPages constraint with for example the anonymous-role or the everyone WLS group in order to be able to allow anonymous access to pages. The ADF security best practice advises placing all pages under the public_html/WEB-INF folder as then ADF will not allow any direct access to the .jspx pages but will only allow acces via a link of the form /faces/welcome rather than /faces/welcome.jspx.  This seems like a very good practice to follow as having multiple entry points to data is a source of confusion in a web application (particulary from a security point of view). In Authentication+Authorization mode only pages with a Page definition file are protected.  In order to add an emty one right click on the page and choose Go to Page Definition.  This will create an empty page definition and now the page will require explicit permission to be seen. It is advisable to give a unique context root via the weblogic.xml for the application, as otherwise the application will clash with any other application with the same context root and it will not deploy

  Read the article

• WCF WS-Security and WSE Nonce Authentication

  - by Rick Strahl

  WCF makes it fairly easy to access WS-* Web Services, except when you run into a service format that it doesn't support. Even then WCF provides a huge amount of flexibility to make the service clients work, however finding the proper interfaces to make that happen is not easy to discover and for the most part undocumented unless you're lucky enough to run into a blog, forum or StackOverflow post on the matter. This is definitely true for the Password Nonce as part of the WS-Security/WSE protocol, which is not natively supported in WCF. Specifically I had a need to create a WCF message on the client that includes a WS-Security header that looks like this from their spec document:<soapenv:Header> <wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <wsse:UsernameToken wsu:Id="UsernameToken-8" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <wsse:Username>TeStUsErNaMe1</wsse:Username> <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" >TeStPaSsWoRd1</wsse:Password> <wsse:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" >f8nUe3YupTU5ISdCy3X9Gg==</wsse:Nonce> <wsu:Created>2011-05-04T19:01:40.981Z</wsu:Created> </wsse:UsernameToken> </wsse:Security> </soapenv:Header> Specifically, the Nonce and Created keys are what WCF doesn't create or have a built in formatting for. Why is there a nonce? My first thought here was WTF? The username and password are there in clear text, what does the Nonce accomplish? The Nonce and created keys are are part of WSE Security specification and are meant to allow the server to detect and prevent replay attacks. The hashed nonce should be unique per request which the server can store and check for before running another request thus ensuring that a request is not replayed with exactly the same values. Basic ServiceUtl Import - not much Luck The first thing I did when I imported this service with a service reference was to simply import it as a Service Reference. The Add Service Reference import automatically detects that WS-Security is required and appropariately adds the WS-Security to the basicHttpBinding in the config file:<?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <bindings> <basicHttpBinding> <binding name="RealTimeOnlineSoapBinding"> <security mode="Transport" /> </binding> <binding name="RealTimeOnlineSoapBinding1" /> </basicHttpBinding> </bindings> <client> <endpoint address="https://notarealurl.com:443/services/RealTimeOnline" binding="basicHttpBinding" bindingConfiguration="RealTimeOnlineSoapBinding" contract="RealTimeOnline.RealTimeOnline" name="RealTimeOnline" /> </client> </system.serviceModel> </configuration> If if I run this as is using code like this:var client = new RealTimeOnlineClient(); client.ClientCredentials.UserName.UserName = "TheUsername"; client.ClientCredentials.UserName.Password = "ThePassword"; … I get nothing in terms of WS-Security headers. The request is sent, but the the binding expects transport level security to be applied, rather than message level security. To fix this so that a WS-Security message header is sent the security mode can be changed to: <security mode="TransportWithMessageCredential" /> Now if I re-run I at least get a WS-Security header which looks like this:<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <s:Header> <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <u:Timestamp u:Id="_0"> <u:Created>2012-11-24T02:55:18.011Z</u:Created> <u:Expires>2012-11-24T03:00:18.011Z</u:Expires> </u:Timestamp> <o:UsernameToken u:Id="uuid-18c215d4-1106-40a5-8dd1-c81fdddf19d3-1"> <o:Username>TheUserName</o:Username> <o:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" >ThePassword</o:Password> </o:UsernameToken> </o:Security> </s:Header> Closer! Now the WS-Security header is there along with a timestamp field (which might not be accepted by some WS-Security expecting services), but there's no Nonce or created timestamp as required by my original service. Using a CustomBinding instead My next try was to go with a CustomBinding instead of basicHttpBinding as it allows a bit more control over the protocol and transport configurations for the binding. Specifically I can explicitly specify the message protocol(s) used. Using configuration file settings here's what the config file looks like:<?xml version="1.0"?> <configuration> <system.serviceModel> <bindings> <customBinding> <binding name="CustomSoapBinding"> <security includeTimestamp="false" authenticationMode="UserNameOverTransport" defaultAlgorithmSuite="Basic256" requireDerivedKeys="false" messageSecurityVersion="WSSecurity10WSTrustFebruary2005WSSecureConversationFebruary2005WSSecurityPolicy11BasicSecurityProfile10"> </security> <textMessageEncoding messageVersion="Soap11"></textMessageEncoding> <httpsTransport maxReceivedMessageSize="2000000000"/> </binding> </customBinding> </bindings> <client> <endpoint address="https://notrealurl.com:443/services/RealTimeOnline" binding="customBinding" bindingConfiguration="CustomSoapBinding" contract="RealTimeOnline.RealTimeOnline" name="RealTimeOnline" /> </client> </system.serviceModel> <startup> <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/> </startup> </configuration> This ends up creating a cleaner header that's missing the timestamp field which can cause some services problems. The WS-Security header output generated with the above looks like this:<s:Header> <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <o:UsernameToken u:Id="uuid-291622ca-4c11-460f-9886-ac1c78813b24-1"> <o:Username>TheUsername</o:Username> <o:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" >ThePassword</o:Password> </o:UsernameToken> </o:Security> </s:Header> This is closer as it includes only the username and password. The key here is the protocol for WS-Security:messageSecurityVersion="WSSecurity10WSTrustFebruary2005WSSecureConversationFebruary2005WSSecurityPolicy11BasicSecurityProfile10" which explicitly specifies the protocol version. There are several variants of this specification but none of them seem to support the nonce unfortunately. This protocol does allow for optional omission of the Nonce and created timestamp provided (which effectively makes those keys optional). With some services I tried that requested a Nonce just using this protocol actually worked where the default basicHttpBinding failed to connect, so this is a possible solution for access to some services. Unfortunately for my target service that was not an option. The nonce has to be there. Creating Custom ClientCredentials As it turns out WCF doesn't have support for the Digest Nonce as part of WS-Security, and so as far as I can tell there's no way to do it just with configuration settings. I did a bunch of research on this trying to find workarounds for this, and I did find a couple of entries on StackOverflow as well as on the MSDN forums. However, none of these are particularily clear and I ended up using bits and pieces of several of them to arrive at a working solution in the end. http://stackoverflow.com/questions/896901/wcf-adding-nonce-to-usernametoken http://social.msdn.microsoft.com/Forums/en-US/wcf/thread/4df3354f-0627-42d9-b5fb-6e880b60f8ee The latter forum message is the more useful of the two (the last message on the thread in particular) and it has most of the information required to make this work. But it took some experimentation for me to get this right so I'll recount the process here maybe a bit more comprehensively. In order for this to work a number of classes have to be overridden: ClientCredentials ClientCredentialsSecurityTokenManager WSSecurityTokenizer The idea is that we need to create a custom ClientCredential class to hold the custom properties so they can be set from the UI or via configuration settings. The TokenManager and Tokenizer are mainly required to allow the custom credentials class to flow through the WCF pipeline and eventually provide custom serialization. Here are the three classes required and their full implementations:public class CustomCredentials : ClientCredentials { public CustomCredentials() { } protected CustomCredentials(CustomCredentials cc) : base(cc) { } public override System.IdentityModel.Selectors.SecurityTokenManager CreateSecurityTokenManager() { return new CustomSecurityTokenManager(this); } protected override ClientCredentials CloneCore() { return new CustomCredentials(this); } } public class CustomSecurityTokenManager : ClientCredentialsSecurityTokenManager { public CustomSecurityTokenManager(CustomCredentials cred) : base(cred) { } public override System.IdentityModel.Selectors.SecurityTokenSerializer CreateSecurityTokenSerializer(System.IdentityModel.Selectors.SecurityTokenVersion version) { return new CustomTokenSerializer(System.ServiceModel.Security.SecurityVersion.WSSecurity11); } } public class CustomTokenSerializer : WSSecurityTokenSerializer { public CustomTokenSerializer(SecurityVersion sv) : base(sv) { } protected override void WriteTokenCore(System.Xml.XmlWriter writer, System.IdentityModel.Tokens.SecurityToken token) { UserNameSecurityToken userToken = token as UserNameSecurityToken; string tokennamespace = "o"; DateTime created = DateTime.Now; string createdStr = created.ToString("yyyy-MM-ddThh:mm:ss.fffZ"); // unique Nonce value - encode with SHA-1 for 'randomness' // in theory the nonce could just be the GUID by itself string phrase = Guid.NewGuid().ToString(); var nonce = GetSHA1String(phrase); // in this case password is plain text // for digest mode password needs to be encoded as: // PasswordAsDigest = Base64(SHA-1(Nonce + Created + Password)) // and profile needs to change to //string password = GetSHA1String(nonce + createdStr + userToken.Password); string password = userToken.Password; writer.WriteRaw(string.Format( "<{0}:UsernameToken u:Id=\"" + token.Id + "\" xmlns:u=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd\">" + "<{0}:Username>" + userToken.UserName + "</{0}:Username>" + "<{0}:Password Type=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText\">" + password + "</{0}:Password>" + "<{0}:Nonce EncodingType=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary\">" + nonce + "</{0}:Nonce>" + "<u:Created>" + createdStr + "</u:Created></{0}:UsernameToken>", tokennamespace)); } protected string GetSHA1String(string phrase) { SHA1CryptoServiceProvider sha1Hasher = new SHA1CryptoServiceProvider(); byte[] hashedDataBytes = sha1Hasher.ComputeHash(Encoding.UTF8.GetBytes(phrase)); return Convert.ToBase64String(hashedDataBytes); } } Realistically only the CustomTokenSerializer has any significant code in. The code there deals with actually serializing the custom credentials using low level XML semantics by writing output into an XML writer. I can't take credit for this code - most of the code comes from the MSDN forum post mentioned earlier - I made a few adjustments to simplify the nonce generation and also added some notes to allow for PasswordDigest generation. Per spec the nonce is nothing more than a unique value that's supposed to be 'random'. I'm thinking that this value can be any string that's unique and a GUID on its own probably would have sufficed. Comments on other posts that GUIDs can be potentially guessed are highly exaggerated to say the least IMHO. To satisfy even that aspect though I added the SHA1 encryption and binary decoding to give a more random value that would be impossible to 'guess'. The original example from the forum post used another level of encoding and decoding to string in between - but that really didn't accomplish anything but extra overhead. The header output generated from this looks like this:<s:Header> <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <o:UsernameToken u:Id="uuid-f43d8b0d-0ebb-482e-998d-f544401a3c91-1" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <o:Username>TheUsername</o:Username> <o:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">ThePassword</o:Password> <o:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" >PjVE24TC6HtdAnsf3U9c5WMsECY=</o:Nonce> <u:Created>2012-11-23T07:10:04.670Z</u:Created> </o:UsernameToken> </o:Security> </s:Header> which is exactly as it should be. Password Digest? In my case the password is passed in plain text over an SSL connection, so there's no digest required so I was done with the code above. Since I don't have a service handy that requires a password digest,  I had no way of testing the code for the digest implementation, but here is how this is likely to work. If you need to pass a digest encoded password things are a little bit trickier. The password type namespace needs to change to: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#Digest and then the password value needs to be encoded. The format for password digest encoding is this: Base64(SHA-1(Nonce + Created + Password)) and it can be handled in the code above with this code (that's commented in the snippet above): string password = GetSHA1String(nonce + createdStr + userToken.Password); The entire WriteTokenCore method for digest code looks like this:protected override void WriteTokenCore(System.Xml.XmlWriter writer, System.IdentityModel.Tokens.SecurityToken token) { UserNameSecurityToken userToken = token as UserNameSecurityToken; string tokennamespace = "o"; DateTime created = DateTime.Now; string createdStr = created.ToString("yyyy-MM-ddThh:mm:ss.fffZ"); // unique Nonce value - encode with SHA-1 for 'randomness' // in theory the nonce could just be the GUID by itself string phrase = Guid.NewGuid().ToString(); var nonce = GetSHA1String(phrase); string password = GetSHA1String(nonce + createdStr + userToken.Password); writer.WriteRaw(string.Format( "<{0}:UsernameToken u:Id=\"" + token.Id + "\" xmlns:u=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd\">" + "<{0}:Username>" + userToken.UserName + "</{0}:Username>" + "<{0}:Password Type=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#Digest\">" + password + "</{0}:Password>" + "<{0}:Nonce EncodingType=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary\">" + nonce + "</{0}:Nonce>" + "<u:Created>" + createdStr + "</u:Created></{0}:UsernameToken>", tokennamespace)); } I had no service to connect to to try out Digest auth - if you end up needing it and get it to work please drop a comment… How to use the custom Credentials The easiest way to use the custom credentials is to create the client in code. Here's a factory method I use to create an instance of my service client:  public static RealTimeOnlineClient CreateRealTimeOnlineProxy(string url, string username, string password) { if (string.IsNullOrEmpty(url)) url = "https://notrealurl.com:443/cows/services/RealTimeOnline"; CustomBinding binding = new CustomBinding(); var security = TransportSecurityBindingElement.CreateUserNameOverTransportBindingElement(); security.IncludeTimestamp = false; security.DefaultAlgorithmSuite = SecurityAlgorithmSuite.Basic256; security.MessageSecurityVersion = MessageSecurityVersion.WSSecurity10WSTrustFebruary2005WSSecureConversationFebruary2005WSSecurityPolicy11BasicSecurityProfile10; var encoding = new TextMessageEncodingBindingElement(); encoding.MessageVersion = MessageVersion.Soap11; var transport = new HttpsTransportBindingElement(); transport.MaxReceivedMessageSize = 20000000; // 20 megs binding.Elements.Add(security); binding.Elements.Add(encoding); binding.Elements.Add(transport); RealTimeOnlineClient client = new RealTimeOnlineClient(binding, new EndpointAddress(url)); // to use full client credential with Nonce uncomment this code: // it looks like this might not be required - the service seems to work without it client.ChannelFactory.Endpoint.Behaviors.Remove<System.ServiceModel.Description.ClientCredentials>(); client.ChannelFactory.Endpoint.Behaviors.Add(new CustomCredentials()); client.ClientCredentials.UserName.UserName = username; client.ClientCredentials.UserName.Password = password; return client; } This returns a service client that's ready to call other service methods. The key item in this code is the ChannelFactory endpoint behavior modification that that first removes the original ClientCredentials and then adds the new one. The ClientCredentials property on the client is read only and this is the way it has to be added.   Summary It's a bummer that WCF doesn't suport WSE Security authentication with nonce values out of the box. From reading the comments in posts/articles while I was trying to find a solution, I found that this feature was omitted by design as this protocol is considered unsecure. While I agree that plain text passwords are rarely a good idea even if they go over secured SSL connection as WSE Security does, there are unfortunately quite a few services (mosly Java services I suspect) that use this protocol. I've run into this twice now and trying to find a solution online I can see that this is not an isolated problem - many others seem to have struggled with this. It seems there are about a dozen questions about this on StackOverflow all with varying incomplete answers. Hopefully this post provides a little more coherent content in one place. Again I marvel at WCF and its breadth of support for protocol features it has in a single tool. And even when it can't handle something there are ways to get it working via extensibility. But at the same time I marvel at how freaking difficult it is to arrive at these solutions. I mean there's no way I could have ever figured this out on my own. It takes somebody working on the WCF team or at least being very, very intricately involved in the innards of WCF to figure out the interconnection of the various objects to do this from scratch. Luckily this is an older problem that has been discussed extensively online and I was able to cobble together a solution from the online content. I'm glad it worked out that way, but it feels dirty and incomplete in that there's a whole learning path that was omitted to get here… Man am I glad I'm not dealing with SOAP services much anymore. REST service security - even when using some sort of federation is a piece of cake by comparison :-) I'm sure once standards bodies gets involved we'll be right back in security standard hell…© Rick Strahl, West Wind Technologies, 2005-2012Posted in WCF  Web Services   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• interactive login on cgi script

  - by raindrop18

  I am new for perl-cgi script. and my objective is to create user/pass interactive script to log and get information from multiple device at once. instead of add the user/pass credential on the script itself. since i am new if some one show me how to write the interactive part of the script. thanks much!!! here is the current code usr/local/bin/perl -wl use CGI ':standard'; use Net::Telnet::Cisco; ### set the error fields to nulls $selerror = ""; ### Input from the screen - make sure data was input if (param() and param('Switches') ne "" and (param('Mac') ne "" or param('Interface Description') ne "" or param('VLAN') ne "" )) { ### Put the input devices into an array. @devices = param('Switches'); ### format the header data print header(); print start_html(-title=>"ShowSwitches",-BGCOLOR=>'aqua'); print "\n",h1("<CENTER>Show Switches</CENTER>"); print "\n",hr(),"\n"; ### Go thru the device array. foreach(@devices) { $error_msg = ""; $TAC_login_error = ""; $open_error = ""; $retry_open_error = ""; $prompt_error = ""; $password_error = ""; ### Take input host and use to send to Telnet $host = $_; $session = Net::Telnet::Cisco->new(Errmode => 'return', Timeout => 30); ### Connect to the host $session->open(Host =>"$host", Timeout => 15); $open_error = $session->errmsg; ### Login with TACACS if host can be connected to if ($open_error eq "") { $session->login('USER', 'PASS'); $TAC_login_error = $session->errmsg; ### Login with TACACS failed - try standard login if ($TAC_login_error ne "") { ### Connect to host $session->open(Host =>"$host", Timeout => 15); $retry_open_error = $session->errmsg; ### Wait for password prompt - multiple matches - devices may have different device prompts. if ($retry_open_error eq "") { $session->waitfor(Match => '/Password:.*$/', Match => '/Enter password:.*$/', Timeout => 20); $prompt_error = $session->errmsg; if ($prompt_error eq "") { ### Input password $session->print('getmeout'); $password_error = $session->errmsg; $session->waitfor('/.*>$/'); $password_error = $session->errmsg; } } } } ### No errors, then issue "show commands". if ($open_error eq "" and ($TAC_login_error eq "" or $retry_open_error eq "") and $prompt_error eq "" and $password_error eq "") { ### Show Mac if (param('Mac')) { $cmd = 'sh mac'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show mac - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } ### Show Interface Description if (param('Interface Description')) { $cmd = 'sh interface description'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show mac - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } ### Show VLAN if (param('VLAN')) { $cmd = 'sh vlan'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show vlan - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } } elsif ($TAC_login_error ne "" and $password_error ne "") { $error_msg = "Error - $host " . $TAC_login_error . ' - possible incorrect TACACS or standard password parameters on device.'; } elsif ($open_error ne "") { $error_msg = "Error - $host " . $open_error . ' - cannot connect to host - is it down??'; } elsif ($prompt_error ne "") { $error_msg = "Error - $host " . $prompt_error . ' - password prompt not recognized - invalid TACACS (or user) password.'; } elsif ($password_error ne "") { $error_msg = "Error - $host " . $password_error . ' - possible incorrect user/password parameters on device.'; } if ($error_msg ne "" ) { print b($error_msg),(br); print hr(),"\n"; } print hr(),"\n"; print end_html(),"\n"; } } else { ### No Show command was selected. if (param('Submit') and param('Mac') eq "" and param('Interface Description') eq "" and param('VLAN') eq "" ) { $selerror = 'No Show Displays were selected. Try again please!!'; } elsif ### No switch was selected. (param('Submit') and param('Switches') eq "") { $selerror = 'No devices were selected. Try again please!!'; } ### This formats the initial Show Web page. print header(-Pragma='no-cache'), start_html(-title=>"Show Displays",-BGCOLOR=>'aqua'), h1("<CENTER>Show Switches</CENTER>"),hr(), start_form(), b("Select Show Commands:"), br(), br(), checkbox(-name=>'Mac'), checkbox(-name=>'Interface Description'), checkbox(-name=>'VLAN'), br(),br(),hr(),br(), b("Select One or More Devices:"), br(), br(), scrolling_list (-name => 'Switches', -default=> "NONE", -values => ['cs6a', 'cs7a', 'cs7b', 'cs8b', 'cs9a', 'c9b', 'csa' ], -multiple => 'true', -size => 7, ), p(submit('Submit'),reset('Reset')), b($selerror), end_form(),hr(), end_html(); } #

  Read the article

• interactive login on perl cgi script- updated question [closed]

  - by raindrop18

  I am new for perl-cgi script. and my objective is to create user/pass interactive script to log and get information from multiple device at once. instead of add the user/pass credential on the script itself. since i am new if some one show me how to write the interactive part of the script. thanks much!!! here is the current code usr/local/bin/perl -wl use CGI ':standard'; use Net::Telnet::Cisco; # ### set the error fields to nulls $selerror = ""; # ### Input from the screen - make sure data was input if (param() and param('Switches') ne "" and (param('Mac') ne "" or param('Interface Description') ne "" or param('VLAN') ne "" )) { # ### Put the input devices into an array. @devices = param('Switches'); # ### format the header data print header(); print start_html(-title=>"ShowSwitches",-BGCOLOR=>'aqua'); print "\n",h1("<CENTER>Show Switches</CENTER>"); print "\n",hr(),"\n"; # ### Go thru the device array. foreach(@devices) { $error_msg = ""; $TAC_login_error = ""; $open_error = ""; $retry_open_error = ""; $prompt_error = ""; $password_error = ""; # ### Take input host and use to send to Telnet $host = $_; $session = Net::Telnet::Cisco->new(Errmode => 'return', Timeout => 30); # ### Connect to the host $session->open(Host =>"$host", Timeout => 15); $open_error = $session->errmsg; # ### Login with TACACS if host can be connected to if ($open_error eq "") { $session->login('USER', 'PASS'); $TAC_login_error = $session->errmsg; # ### Login with TACACS failed - try standard login if ($TAC_login_error ne "") { # ### Connect to host $session->open(Host =>"$host", Timeout => 15); $retry_open_error = $session->errmsg; # ### Wait for password prompt - multiple matches - devices may have different device prompts. if ($retry_open_error eq "") { $session->waitfor(Match => '/Password:.*$/', Match => '/Enter password:.*$/', Timeout => 20); $prompt_error = $session->errmsg; if ($prompt_error eq "") { # ### Input password $session->print('getmeout'); $password_error = $session->errmsg; $session->waitfor('/.*>$/'); $password_error = $session->errmsg; } } } } # ### No errors, then issue "show commands". if ($open_error eq "" and ($TAC_login_error eq "" or $retry_open_error eq "") and $prompt_error eq "" and $password_error eq "") { # ### Show Mac if (param('Mac')) { $cmd = 'sh mac'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show mac - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } # ### Show Interface Description if (param('Interface Description')) { $cmd = 'sh interface description'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show mac - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } # ### Show VLAN if (param('VLAN')) { $cmd = 'sh vlan'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show vlan - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } } elsif ($TAC_login_error ne "" and $password_error ne "") { $error_msg = "Error - $host " . $TAC_login_error . ' - possible incorrect TACACS or standard password parameters on device.'; } elsif ($open_error ne "") { $error_msg = "Error - $host " . $open_error . ' - cannot connect to host - is it down??'; } elsif ($prompt_error ne "") { $error_msg = "Error - $host " . $prompt_error . ' - password prompt not recognized - invalid TACACS (or user) password.'; } elsif ($password_error ne "") { $error_msg = "Error - $host " . $password_error . ' - possible incorrect user/password parameters on device.'; } if ($error_msg ne "" ) { print b($error_msg),(br); print hr(),"\n"; } print hr(),"\n"; print end_html(),"\n"; } } else { # ### No Show command was selected. if (param('Submit') and param('Mac') eq "" and param('Interface Description') eq "" and param('VLAN') eq "" ) { $selerror = 'No Show Displays were selected. Try again please!!'; } elsif # ### No switch was selected. (param('Submit') and param('Switches') eq "") { $selerror = 'No devices were selected. Try again please!!'; } # ### This formats the initial Show Web page. print header(-Pragma=>'no-cache'), start_html(-title=>"Show Displays",-BGCOLOR=>'aqua'), h1("<CENTER>Show Switches</CENTER>"),hr(), start_form(), b("Select Show Commands:"), br(), br(), checkbox(-name=>'Mac'), checkbox(-name=>'Interface Description'), checkbox(-name=>'VLAN'), br(),br(),hr(),br(), b("Select One or More Devices:"), br(), br(), scrolling_list (-name => 'Switches', -default=> "NONE", -values => ['cs6a', 'cs7a', 'cs7b', 'cs8b', 'cs9a', 'c9b', 'csa' ], -multiple => 'true', -size => 7, ), p(submit('Submit'),reset('Reset')), b($selerror), end_form(),hr(), end_html(); } #

  Read the article

• Why should you choose Oracle WebLogic 12c instead of JBoss EAP 6?

  - by Ricardo Ferreira

  In this post, I will cover some technical differences between Oracle WebLogic 12c and JBoss EAP 6, which was released a couple days ago from Red Hat. This article claims to help you in the evaluation of key points that you should consider when choosing for an Java EE application server. In the following sections, I will present to you some important aspects that most customers ask us when they are seriously evaluating for an middleware infrastructure, specially if you are considering JBoss for some reason. I would suggest that you keep the following question in mind while you are reading the points: "Why should I choose JBoss instead of WebLogic?" 1) Multi Datacenter Deployment and Clustering - D/R ("Disaster & Recovery") architecture support is embedded on the WebLogic Server 12c product. JBoss EAP 6 on the other hand has no direct D/R support included, Red Hat relies on third-part tools with higher prices. When you consider a middleware solution to host your business critical application, you should worry with every architectural aspect that are related with the solution. Fail-over support is one little aspect of a truly reliable solution. If you do not worry about D/R, your solution will not be reliable. Having said that, with Red Hat and JBoss EAP 6, you have this extra cost that will increase considerably the total cost of ownership of the solution. As we commonly hear from analysts, open-source are not so cheaper when you start seeing the big picture. - WebLogic Server 12c supports advanced LAN clustering, detection of death servers and have a common alert framework. JBoss EAP 6 on the other hand has limited LAN clustering support with no server death detection. They do not generate any alerts when servers goes down (only if you buy JBoss ON which is a separated technology, but until now does not support JBoss EAP 6) and manual intervention are required when servers goes down. In most cases, admin people must rely on "kill -9", "tail -f someFile.log" and "ps ax | grep java" commands to manage failures and clustering anomalies. - WebLogic Server 12c supports the concept of Node Manager, which is a separated process that runs on the physical | virtual servers that allows extend the administration of the cluster to WebLogic managed servers that are often distributed across multiple machines and geographic locations. JBoss EAP 6 on the other hand has no equivalent technology. Whole server instances must be managed individually. - WebLogic Server 12c Node Manager supports Coherence to boost performance when managing servers. JBoss EAP 6 on the other hand has no similar technology. There is no way to coordinate JBoss and infiniband instances provided by JBoss using high throughput and low latency protocols like InfiniBand. The Node Manager feature also allows another very important feature that JBoss EAP lacks: secure the administration. When using WebLogic Node Manager, all the administration tasks are sent to the managed servers in a secure tunel protected by a certificate, which means that the transport layer that separates the WebLogic administration console from the managed servers are secured by SSL. - WebLogic Server 12c are now integrated with OTD ("Oracle Traffic Director") which is a web server technology derived from the former Sun iPlanet Web Server. This software complements the web server support offered by OHS ("Oracle HTTP Server"). Using OTD, WebLogic instances are load-balanced by a high powerful software that knows how to handle SDP ("Socket Direct Protocol") over InfiniBand, which boost performance when used with engineered systems technologies like Oracle Exalogic Elastic Cloud. JBoss EAP 6 on the other hand only offers support to Apache Web Server with custom modules created to deal with JBoss clusters, but only across standard TCP/IP networks.  2) Application and Runtime Diagnostics - WebLogic Server 12c have diagnostics capabilities embedded on the server called WLDF ("WebLogic Diagnostic Framework") so there is no need to rely on third-part tools. JBoss EAP 6 on the other hand has no diagnostics capabilities. Their only diagnostics tool is the log generated by the application server. Admin people are encouraged to analyse thousands of log lines to find out what is going on. - WebLogic Server 12c complement WLDF with JRockit MC ("Mission Control"), which provides to administrators and developers a complete insight about the JVM performance, behavior and possible bottlenecks. WebLogic Server 12c also have an classloader analysis tool embedded, and even a log analyzer tool that enables administrators and developers to view logs of multiple servers at the same time. JBoss EAP 6 on the other hand relies on third-part tools to do something similar. Again, only log searching are offered to find out whats going on. - WebLogic Server 12c offers end-to-end traceability and monitoring available through Oracle EM ("Enterprise Manager"), including monitoring of business transactions that flows through web servers, ESBs, application servers and database servers, all of this with high deep JVM analysis and diagnostics. JBoss EAP 6 on the other hand, even using JBoss ON ("Operations Network"), which is a separated technology, does not support those features. Red Hat relies on third-part tools to provide direct Oracle database traceability across JVMs. One of those tools are Oracle EM for non-Oracle middleware that manage JBoss, Tomcat, Websphere and IIS transparently. - WebLogic Server 12c with their JRockit support offers a tool called JRockit Flight Recorder, which can give developers a complete visibility of a certain period of application production monitoring with zero extra overhead. This automatic recording allows you to deep analyse threads latency, memory leaks, thread contention, resource utilization, stack overflow damages and GC ("Garbage Collection") cycles, to observe in real time stop-the-world phenomenons, generational, reference count and parallel collects and mutator threads analysis. JBoss EAP 6 don't even dream to support something similar, even because they don't have their own JVM. 3) Application Server Administration - WebLogic Server 12c offers a complete administration console complemented with scripting and macro-like recording capabilities. A single WebLogic console can managed up to hundreds of WebLogic servers belonging to the same domain. JBoss EAP 6 on the other hand has a limited console and provides a XML centric administration. JBoss, after ten years, started the development of a rudimentary centralized administration that still leave a lot of administration tasks aside, so admin people and developers must touch scripts and XML configuration files for most advanced and even simple administration tasks. This lead applications to error prone and risky deployments. Even using JBoss ON, JBoss EAP are not able to offer decent administration features for admin people which must be high skilled in JBoss internal architecture and its managing capabilities. - Oracle EM is available to manage multiple domains, databases, application servers, operating systems and virtualization, with a complete end-to-end visibility. JBoss ON does not provide management capabilities across the complete architecture, only basic monitoring. Even deployment must be done aside JBoss ON which does no integrate well with others softwares than JBoss. Until now, JBoss ON does not supports JBoss EAP 6, so even their minimal support for JBoss are not available for JBoss EAP 6 leaving customers uncovered and subject to high skilled JBoss admin people. - WebLogic Server 12c has the same administration model whatever is the topology selected by the customer. JBoss EAP 6 on the other hand differentiates between two operational models: standalone-mode and domain-mode, that are not consistent with each other. Depending on the mode used, the administration skill is different. - WebLogic Server 12c has no point-of-failures processes, and it does not need to define any specialized server. Domain model in WebLogic is available for years (at least ten years or more) and is production proven. JBoss EAP 6 on the other hand needs special processes to garantee JBoss integrity, the PC ("Process-Controller") and the HC ("Host-Controller"). Different from WebLogic, the domain model in JBoss is quite new (one year at tops) of maturity, and need to mature considerably until start doing things like WebLogic domain model does. - WebLogic Server 12c supports parallel deployment model which enables some artifacts being deployed at the same time. JBoss EAP 6 on the other hand does not have any similar feature. Every deployment are done atomically in the containers. This means that if you have a huge EAR (an EAR of 120 MB of size for instance) and deploy onto JBoss EAP 6, this EAR will take some minutes in order to starting accept thread requests. The same EAR deployed onto WebLogic Server 12c will reduce the deployment time at least in 2X compared to JBoss. 4) Support and Upgrades - WebLogic Server 12c has patch management available. JBoss EAP 6 on the other hand has no patch management available, each JBoss EAP instance should be patched manually. To achieve such feature, you need to buy a separated technology called JBoss ON ("Operations Network") that manage this type of stuff. But until now, JBoss ON does not support JBoss EAP 6 so, in practice, JBoss EAP 6 does not have this feature. - WebLogic Server 12c supports previuous WebLogic domains without any reconfiguration since its kernel is robust and mature since its creation in 1995. JBoss EAP 6 on the other hand has a proven lack of supportability between JBoss AS 4, 5, 6 and 7. Different kernels and messaging engines were implemented in JBoss stack in the last five years reveling their incapacity to create a well architected and proven middleware technology. - WebLogic Server 12c has patch prescription based on customer configuration. JBoss EAP 6 on the other hand has no such capability. People need to create ticket supports and have their installations revised by Red Hat support guys to gain some patch prescription from them. - Oracle WebLogic Server independent of the version has 8 years of support of new patches and has lifetime release of existing patches beyond that. JBoss EAP 6 on the other hand provides patches for a specific application server version up to 5 years after the release date. JBoss EAP 4 and previous versions had only 4 years. A good question that Red Hat will argue to answer is: "what happens when you find issues after year 5"?  5) RAC ("Real Application Clusters") Support - WebLogic Server 12c ships with a specific JDBC driver to leverage Oracle RAC clustering capabilities (Fast-Application-Notification, Transaction Affinity, Fast-Connection-Failover, etc). Oracle JDBC thin driver are also available. JBoss EAP 6 on the other hand ships only the standard Oracle JDBC thin driver. Load balancing with Oracle RAC are not supported. Manual intervention in case of planned or unplanned RAC downtime are necessary. In JBoss EAP 6, situation does not reestablish automatically after downtime. - WebLogic Server 12c has a feature called Active GridLink for Oracle RAC which provides up to 3X performance on OLTP applications. This seamless integration between WebLogic and Oracle database enable more value added to critical business applications leveraging their investments in Oracle database technology and Oracle middleware. JBoss EAP 6 on the other hand has no performance gains at all, even when admin people implement some kind of connection-pooling tuning. - WebLogic Server 12c also supports transaction and web session affinity to the Oracle RAC, which provides aditional gains of performance. This is particularly interesting if you are creating a reliable solution that are distributed not only in an LAN cluster, but into a different data center. JBoss EAP 6 on the other hand has no such support. 6) Standards and Technology Support - WebLogic Server 12c is fully Java EE 6 compatible and production ready since december of 2011. JBoss EAP 6 on the other hand became fully compatible with Java EE 6 only in the community version after three months, and production ready only in a few days considering that this article was written in June of 2012. Red Hat says that they are the masters of innovation and technology proliferation, but compared with Oracle and even other proprietary vendors like IBM, they historically speaking are lazy to deliver the most newest technologies and standards adherence. - Oracle is the steward of Java, driving innovation into the platform from commercial and open-source vendors. Red Hat on the other hand does not have its own JVM and relies on third-part JVMs to complete their application server offer. 95% of Red Hat customers are using Oracle HotSpot as JVM, which means that without Oracle involvement, their support are limited exclusively to the application server layer and we all know that most problems are happens in the JVM layer. - WebLogic Server 12c supports natively JDK 7, which empower developers to explore the maximum of the Java platform productivity when writing code. This feature differentiate WebLogic from others application servers (except GlassFish that are also managed by Oracle) because the usage of JDK 7 introduce such remarkable productivity features like the "try-with-resources" enhancement, catching multiple exceptions with one try block, Strings in the switch statements, JVM improvements in terms of JDBC, I/O, networking, security, concurrency and of course, the most important feature of Java 7: native support for multiple non-Java languages. More features regarding JDK 7 can be found here. JBoss EAP 6 on the other hand does not support JDK 7 officially, they comment in their community version that "Java SE 7 can be used with JBoss 7" which does not gives you any guarantees of enterprise support for JDK 7. - Oracle WebLogic Server 12c supports integration with Spring framework allowing Spring applications to use WebLogic special transaction manager, exposing bean interfaces to WebLogic MBeans to take advantage of all WebLogic monitoring and administration advantages. JBoss EAP 6 on the other hand has no special integration with Spring. In fact, Red Hat offers a suspicious package called "JBoss Web Platform" that in theory supports Spring, but in practice this package does not offers any special integration. It is just a facility for Red Hat customers to have support from both JBoss and Spring technology using the same customer support. 7) Lightweight Development - Oracle WebLogic Server 12c and Oracle GlassFish are completely integrated and can share applications without any modifications. Starting with the 12c version, WebLogic now understands natively GlassFish deployment descriptors and specific configurations in order to offer you a truly and reliable migration path from a community Java EE application server to a enterprise middleware product like WebLogic. JBoss EAP 6 on the other hand has no support to natively reuse an existing (or still in development) application from JBoss AS community server. Users of JBoss suffer of critical issues during deployment time that includes: changing the libraries and dependencies of the application, patching the DTD or XSD deployment descriptors, refactoring of the application layers due classloading issues and anomalies, rebuilding of persistence, business and web layers due issues with "usage of the certified version of an certain dependency" or "frameworks that Red Hat potentially does not recommend" etc. If you have the culture or enterprise IT directive of developing Java EE applications using community middleware to in a certain future, transition to enterprise (supported by a vendor) middleware, Oracle WebLogic plus Oracle GlassFish offers you a more sustainable solution. - WebLogic Server 12c has a very light ZIP distribution (less than 165 MB). JBoss EAP 6 ZIP size is around 130 MB, together with JBoss ON you have more 100 MB resulting in a higher download footprint. This is particularly interesting if you plan to use automated setup of application server instances (for example, to rapidly setup a development or staging environment) using Maven or Hudson. - WebLogic Server 12c has a complete integration with Maven allowing developers to setup WebLogic domains with few commands. Tasks like downloading WebLogic, installation, domain creation, data sources deployment are completely integrated. JBoss EAP 6 on the other hand has a limited offer integration with those tools.  - WebLogic Server 12c has a startup mode called WLX that turns-off EJB, JMS and JCA containers leaving enabled only the web container with Java EE 6 web profile. JBoss EAP 6 on the other hand has no such feature, you need to disable manually the containers that you do not want to use. - WebLogic Server 12c supports fastswap, which enables you to change classes without redeployment. This is particularly interesting if you are developing patches for the application that is already deployed and you do not want to redeploy the entire application. This is the same behavior that most application servers offers to JSP pages, but with WebLogic Server 12c, you have the same feature for Java classes in general. JBoss EAP 6 on the other hand has no such support. Even JBoss EAP 5 does not support this until now. 8) JMS and Messaging - WebLogic Server 12c has a proven and high scalable JMS implementation since its initial release in 1995. JBoss EAP 6 on the other hand has a still immature technology called HornetQ, which was introduced in JBoss EAP 5 replacing everything that was implemented in the previous versions. Red Hat loves to introduce new technologies across JBoss versions, playing around with customers and their investments. And when they are asked about why they have changed the implementation and caused such a mess, their answer is always: "the previous implementation was inadequate and not aligned with the community strategy so we are creating a new a improved one". This Red Hat practice leads to uncomfortable investments that in a near future (sometimes less than a year) will be affected in someway. - WebLogic Server 12c has troubleshooting and monitoring features included on the WebLogic console and WLDF. JBoss EAP 6 on the other hand has no direct monitoring on the console, activity is reflected only on the logs, no debug logs available in case of JMS issues. - WebLogic Server 12c has extremely good performance and scalability. JBoss EAP 6 on the other hand has a JMS storage mechanism relying on Oracle database or MySQL. This means that if an issue in production happens and Red Hat affirms that an performance issue is happening due to database problems, they will not support you on the performance issue. They will orient you to call Oracle instead. - WebLogic Server 12c supports messaging enterprise features like SAF ("Store and Forward"), Distributed Queues/Topics and Foreign JMS providers support that leverage JMS implementations without compromise developer code making things completely transparent. JBoss EAP 6 on the other hand do not even dream to support such features. 9) Caching and Grid - Coherence, which is the leading and most mature data grid technology from Oracle, is available since early 2000 and was integrated with WebLogic in 2009. Coherence and WebLogic clusters can be both managed from WebLogic administrative console. Even Node Manager supports Coherence. JBoss on the other hand discontinued JBoss Cache, which was their caching implementation just like they did with the messaging implementation (JBossMQ) which was a issue for long term customers. JBoss EAP 6 ships InfiniSpan version 1.0 which is immature and lack a proven record of successful cases and reliability. - WebLogic Server 12c has a feature called ActiveCache which uses Coherence to, without any code changes, replicate HTTP sessions from both WebLogic and other application servers like JBoss, Tomcat, Websphere, GlassFish and even Microsoft IIS. JBoss EAP 6 on the other hand does have such support and even when they do in the future, they probably will support only their own application server. - Coherence can be used to manage both L1 and L2 cache levels, providing support to Oracle TopLink and others JPA compliant implementations, even Hibernate. JBoss EAP 6 and Infinispan on the other hand supports only Hibernate. And most important of all: Infinispan does not have any successful case of L1 or L2 caching level support using Hibernate, which lead us to reflect about its viability. 10) Performance - WebLogic Server 12c is certified with Oracle Exalogic Elastic Cloud and can run unchanged applications at this engineered system. This approach can benefit customers from Exalogic optimization's of both kernel and JVM layers to boost performance in terms of 10X for web, OLTP, JMS and grid applications. JBoss EAP 6 on the other hand has no investment on engineered systems: customers do not have the choice to deploy on a Java ultra fast system if their project becomes relevant and performance issues are detected. - WebLogic Server 12c maintains a performance gain across each new release: starting on WebLogic 5.1, the overall performance gain has been close to 4X, which close to a 20% gain release by release. JBoss on the other hand does not provide SPECJAppServer or SPECJEnterprise performance benchmarks. Their so called "performance gains" remains hidden in their customer environments, which lead us to think if it is true or not since we will never get access to those environments. - WebLogic Server 12c has industry performance benchmarks with submissions across platforms and configurations leading SPECJ. Oracle WebLogic leads SPECJAppServer performance in multiple categories, fitting all customer topologies like: dual-node, single-node, multi-node and multi-node with RAC. JBoss... again, does not provide any SPECJAppServer performance benchmarks. - WebLogic Server 12c has a feature called work manager which allows your application to embrace new performance levels based on critical resource utilization of the CPUs usage. Work managers prioritizes work and allocates threads based on an execution model that takes into account administrator-defined parameters and actual run-time performance and throughput. JBoss EAP 6 on the other hand has no compared feature and probably they never will. Not supporting such feature like work managers, JBoss EAP 6 forces admin people and specially developers to uncover performance gains in a intrusive way, rewriting the code and doing performance refactorings. 11) Professional Services Support - WebLogic Server 12c and any other technology sold by Oracle give customers the possibility of hire OCS ("Oracle Consulting Services") to manage critical scenarios, deployment assistance of new applications, high skilled consultancy of architecture, best practices and people allocation together with customer teams. All OCS services are available without any restrictions, having the customer bought software from Oracle or just starting their implementation before any acquisition. JBoss EAP 6 or Red Hat to be more specifically, only offers professional services if you buy subscriptions from them. If you are developing a new critical application for your business and need the help of Red Hat for a serious issue or architecture decision, they will probably say: "OK... I can help you but after you buy subscriptions from me". Red Hat also does not allows their professional services consultants to manage environments that uses community based software. They will probably force you to first buy a subscription, download their "enterprise" version and them, optionally hire their consultants. - Oracle provides you our university to educate your team into our technologies, including of course specialized trainings of WebLogic application server. At any time and location, you can hire Oracle to train your team so you get trustful knowledge according to your specific needs. Certifications for the products are also available if your technical people desire to differentiate themselves as professionals. Red Hat on the other hand have a limited pool of resources to train your team in their technologies. Basically they are selling training and certification for RHEL ("Red Hat Enterprise Linux") but if you demand more specialized training in JBoss middleware, they will probably connect you to some "certified" partner localized training since they are apparently discontinuing their education center, at least here in Brazil. They were not able to reproduce their success with RHEL education to their middleware division since they need first sell the subscriptions to after gives you specialized training. And again, they only offer you specialized training based on their enterprise version (EAP in the case of JBoss) which means that the courses will be a quite outdated. There are reports of developers that took official training's from Red Hat at this year (2012) and in a certain JBoss advanced course, Red Hat supposedly covered JBossMQ as the messaging subsystem, and even the printed material provided was based on JBossMQ since the training was created for JBoss EAP 4.3. 12) Encouraging Transparency without Ulterior Motives - WebLogic Server 12c like any other software from Oracle can be downloaded any time from anywhere, you should only possess an OTN ("Oracle Technology Network") credential and you can download any enterprise software how many times you want. And is not some kind of "trial" version. It is the official binaries that will be running for ever in your data center. Oracle does not encourages the usage of "specific versions" of our software. The binaries you buy from Oracle are the same binaries anyone in the world could download and use for testing and personal education. JBoss EAP 6 on the other hand are not available for download unless you buy a subscription and get access to the Red Hat enterprise repositories. If you need to test, learn or just start creating your application using Red Hat's middleware software, you should download it from the community website. You are not allowed to download the enterprise version that, according to Red Hat are more secure, reliable and robust. But no one of us want to start the development of a software with an unsecured, unreliable and not scalable middleware right? So what you do? You are "invited" by Red Hat to buy subscriptions from them to get access to the "cool" version of the software. - WebLogic Server 12c prices are publicly available in the Oracle website. If you want to know right now how much WebLogic will cost to your organization, just click here and get access to our price list. In the case of WebLogic, check out the "US Oracle Technology Commercial Price List". Oracle also encourages you to get in touch with a sales representative to discuss discounts that would make possible the investment into our technology. But you are not required to do this, only if you are interested in buying our technology or maybe you want to discuss some discount scenarios. JBoss EAP 6 on the other hand does not have its cost publicly available in Red Hat's website or in any other media, at least is not so easy to get such information. The only link you will possibly find in their website is a "Contact a Sales Representative" link. This is not a very good relationship between an customer and an vendor. This is not an example of transparency, mainly when the software are sold as open. In this situations, customers expects to see the software prices publicly available, so they can have the chance to decide, based on the existing features of the software, if the cost is fair or not. Conclusion Oracle WebLogic is the most mature, secure, reliable and scalable Java EE application server of the market, and have a proven record of success around the globe to prove it's majority. Don't lose the chance to discover today how WebLogic could fit your needs and sustain your global IT middleware strategy, no matter if your strategy are completely based on the Cloud or not.

  Read the article

• WCF AuthenticationService in IIS7 Error

  - by germandb

  I have a WCF Server running on IIS 7 using default application pool, with SSL activate, the services is installed in a SBS Server 2008. I implement client application services with wcf and SQL 2005 for setting the access control in my application. The application run under windows vista and is make with WPF. In my developer machine the application and the WCF services run well, the IIS i'm use for the trials is the local IIS 7 and the database is the SQL Server 2005 database hosting in my server. I'm using Visual Studio Project Designer to enable and configure client application services. using https://localhost/WcfServidorFundacion. When i'm change the authentication services location to https://WcfServices:5659/WcfServidorFundacion and recompile the application, the following error show up. Message: The web service returned the error status code: InternalServerError. Details of service failure: {"Message":" Error while processing your request ","StackTrace":"","ExceptionType":""} Stack Trace: en System.Net.HttpWebRequest.GetResponse() en System.Web.ClientServices.Providers.ProxyHelper.CreateWebRequestAndGetResponse(String serverUri, CookieContainer& cookies, String username, String connectionString, String connectionStringProvider, String[] paramNames, Object[] paramValues, Type returnType) InnerException: System.Net.WebException Message="Remote Server Error: (500) Interal Server Error." I can access the WCF service from the navigator using the url mentioned above and even make a webReference in my project. I make a capture of the response but I'cant post it because i don't have 10 reputation points I activate the error log in the IIS 7 server, and the result is a Warning in the ManagedPipilineHandler. I appreciate if any one can help me Errors & Warnings No.? Severity Event Module Name 132. view trace Warning -MODULE_SET_RESPONSE_ERROR_STATUS ModuleName ManagedPipelineHandler Notification 128 HttpStatus 500 HttpReason Internal Server Error HttpSubStatus 0 ErrorCode 0 ConfigExceptionInfo Notification EXECUTE_REQUEST_HANDLER ErrorCode La operación se ha completado correctamente. (0x0) Maybe this can help, is the web.config of my service <?xml version="1.0" encoding="utf-8"?> <!-- Nota: como alternativa para editar manualmente este archivo, puede utilizar la herramienta Administración de sitios web para configurar los valores de la aplicación. Utilice la opción Sitio Web->Configuración de Asp.Net en Visual Studio. Encontrará una lista completa de valores de configuración y comentarios en machine.config.comments, que se encuentra generalmente en \Windows\Microsoft.Net\Framework\v2.x\Config --> <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" /> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings /> <connectionStrings> <remove name="LocalMySqlServer" /> <remove name="LocalSqlServer" /> <add name="fundacionSelfAut" connectionString="Data Source=FUNDACIONSERVER/PRUEBAS;Initial Catalog=fundacion;User ID=wcfBaseDatos;Password=qwerty_2009;" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <profile enabled="true" defaultProvider="SqlProfileProvider"> <providers> <clear /> <add name="SqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="fundacionSelfAut" applicationName="fundafe" /> </providers> <properties> <add name="FirstName" type="String" /> <add name="LastName" type="String" /> <add name="PhoneNumber" type="String" /> </properties> </profile> <roleManager enabled="true" defaultProvider="SqlRoleProvider"> <providers> <clear /> <add name="SqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="fundacionSelfAut" applicationName="fundafe" /> </providers> </roleManager> <membership defaultProvider="SqlMembershipProvider"> <providers> <clear /> <add name="SqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="fundacionSelfAut" applicationName="fundafe" enablePasswordRetrieval="false" enablePasswordReset="false" requiresQuestionAndAnswer="true" requiresUniqueEmail="true" passwordFormat="Hashed" /> </providers> </membership> <authentication mode="Forms" /> <compilation debug="true" strict="false" explicit="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </assemblies> </compilation> <!-- La sección <authentication> permite la configuración del modo de autenticación de seguridad utilizado por ASP.NET para identificar a un usuario entrante. --> <!-- La sección <customErrors> permite configurar las acciones que se deben llevar a cabo/cuando un error no controlado tiene lugar durante la ejecución de una solicitud. Específicamente, permite a los desarrolladores configurar páginas de error html que se mostrarán en lugar de un seguimiento de pila de errores. <customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm"> <error statusCode="403" redirect="NoAccess.htm" /> <error statusCode="404" redirect="FileNotFound.htm" /> </customErrors> --> <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx" /> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false" /> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </httpModules> <sessionState timeout="40" /> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5" /> <providerOption name="WarnAsError" value="false" /> </compiler> </compilers> </system.codedom> <!-- La sección webServer del sistema es necesaria para ejecutar ASP.NET AJAX en Internet Information Services 7.0. Sin embargo, no es necesaria para la versión anterior de IIS. --> <system.webServer> <validation validateIntegratedModeConfiguration="false" /> <modules> <add name="ScriptModule" preCondition="integratedMode" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated" /> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </handlers> <tracing> <traceFailedRequests> <add path="*"> <traceAreas> <add provider="ASP" verbosity="Verbose" /> <add provider="ASPNET" areas="Infrastructure,Module,Page,AppServices" verbosity="Verbose" /> <add provider="ISAPI Extension" verbosity="Verbose" /> <add provider="WWW Server" areas="Authentication,Security,Filter,StaticFile,CGI,Compression,Cache,RequestNotifications,Module" verbosity="Verbose" /> </traceAreas> <failureDefinitions statusCodes="401.3,500,403,404,405" /> </add> </traceFailedRequests> </tracing> <security> <authorization> <add accessType="Allow" users="germanbarbosa,informatica" /> </authorization> <authentication> <windowsAuthentication enabled="false" /> </authentication> </security> </system.webServer> <system.web.extensions> <scripting> <webServices> <authenticationService enabled="true" requireSSL="true" /> <profileService enabled="true" readAccessProperties="FirstName,LastName,PhoneNumber" /> <roleService enabled="true" /> </webServices> </scripting> </system.web.extensions> <system.serviceModel> <services> <!-- this enables the WCF AuthenticationService endpoint --> <service behaviorConfiguration="AppServiceBehaviors" name="System.Web.ApplicationServices.AuthenticationService"> <endpoint address="" binding="basicHttpBinding" bindingConfiguration="userHttps" bindingNamespace="http://asp.net/ApplicationServices/v200" contract="System.Web.ApplicationServices.AuthenticationService" /> </service> <!-- this enables the WCF RoleService endpoint --> <service behaviorConfiguration="AppServiceBehaviors" name="System.Web.ApplicationServices.RoleService"> <endpoint binding="basicHttpBinding" bindingConfiguration="userHttps" bindingNamespace="http://asp.net/ApplicationServices/v200" contract="System.Web.ApplicationServices.RoleService" /> </service> <!-- this enables the WCF ProfileService endpoint --> <service behaviorConfiguration="AppServiceBehaviors" name="System.Web.ApplicationServices.ProfileService"> <endpoint binding="basicHttpBinding" bindingNamespace="http://asp.net/ApplicationServices/v200" bindingConfiguration="userHttps" contract="System.Web.ApplicationServices.ProfileService" /> </service> </services> <bindings> <basicHttpBinding> <!-- Set up a binding that uses Username as the client credential type --> <binding name="userHttps"> <security mode="Transport"> </security> </binding> </basicHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="AppServiceBehaviors"> <serviceMetadata httpGetEnabled="false" httpsGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" /> <serviceAuthorization principalPermissionMode="UseAspNetRoles" roleProviderName="SqlRoleProvider" /> <serviceCredentials> <userNameAuthentication userNamePasswordValidationMode="MembershipProvider" membershipProviderName="SqlMembershipProvider" /> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> </system.serviceModel> </configuration>

  Read the article

< Previous Page | 8 9 10 11 12 13  | Next Page >