Search Results

Search found 13930 results on 558 pages for 'dev center'.

Page 12/558 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• No root file system is defined error after installation

  - by LearnCode

  I installed ubuntu through Wubi and once i rebooted I get no root file system defined error. here's the output of the boot_info_script.Could anyone point me out where the error is. Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe /ntldr /ntdetect.com /wubildr /ubuntu/winboot/wubildr /wubildr.mbr /ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk /ubuntu/disks/swap.disk sda1/Wubi: _____________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: vfat Boot sector type: Unknown Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /boot.ini /ntldr /NTDETECT.COM sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 240 heads, 63 sectors/track, 20673 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 301,250,879 301,250,817 7 NTFS / exFAT / HPFS /dev/sda2 301,250,943 312,575,759 11,324,817 c W95 FAT32 (LBA) GUID Partition Table detected, but does not seem to be used. Partition Start Sector End Sector # of Sectors System /dev/sda1 323,465,741,313,502,988275,962,973,585-323,465,465,350,529,402 - /dev/sda2 242,728,591,638,290,720578,721,383,108,845,578335,992,791,470,554,859 - /dev/sda3 1,827,498,311,425,204,2562,091,935,274,843,009,907264,436,963,417,805,652 - /dev/sda4 579,711,218,081,401,3572,006,665,459,744,645,1521,426,954,241,663,243,796 - /dev/sda11 270,286,346,402,038,1183,786,543,326,404,525,9543,516,256,980,002,487,837 - /dev/sda12 4,179,681,002,230,769,6684,179,389,374,010,033,387-291,628,220,736,280 - /dev/sda13 232,556,480,979,456,1311,160,152,593,793,119,235927,596,112,813,663,105 - /dev/sda14 98,342,784,050,266,9183,691,264,578,843,725,1953,592,921,794,793,458,278 - /dev/sda15 2,307,845,219,957,882,4961,850,841,032,955,276,350-457,004,187,002,606,145 - /dev/sda16 512,592,046,878,946,497368,458,231,024,779,444-144,133,815,854,167,052 - /dev/sda17 2,504,135,232,870,384,3923,665,087,872,719,320,8291,160,952,639,848,936,438 - /dev/sda18 3,783,181,605,270,691,304122,034,509,624,708,942-3,661,147,095,645,982,361 - /dev/sda19 3,519,661,520,275,829,5122,376,243,094,723,723,587-1,143,418,425,552,105,924 - /dev/sda20 3,867,920,076,859,0744,494,691,111,933,625,1044,490,823,191,856,766,031 - /dev/sda21 1,500,144,061,909,253,7612,511,182,033,846,676,3401,011,037,971,937,422,580 - /dev/sda22 13,035,625,499,900,0062,360,168,613,941,394,9472,347,132,988,441,494,942 - /dev/sda23 4,228,978,682,068,599,48813,159,423,631,648,263-4,215,819,258,436,951,224 - /dev/sda24 3,695,955,742,872,046,9084,561,928,726,501,845,776865,972,983,629,798,869 - /dev/sda25 1,297,460,286,683,948,0461,444,350,486,339,417,957146,890,199,655,469,912 - /dev/sda26 1,228,858,248,533,131,831 0-1,228,858,248,533,131,830 - /dev/sda121 3,189,184,846,146,487,1461,849,820,258,006,914,852-1,339,364,588,139,572,293 - /dev/sda122 1,226,215,547,991,800,578389,781,518,734,546,300-836,434,029,257,254,277 - /dev/sda123 3,851,660,168,574,583,4654,046,215,657,583,031,556194,555,489,008,448,092 - /dev/sda124 1,197,460,980,174,153,341699,103,965,005,093,246-498,357,015,169,060,094 - Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 750.2 GB, 750153367552 bytes 255 heads, 63 sectors/track, 91200 cylinders, total 1465143296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 1,465,143,295 1,465,141,248 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 iso9660 Ubuntu 11.04 amd64 /dev/loop1 squashfs /dev/sda1 E814B55B14B52E06 ntfs /dev/sda2 01CD-023B vfat HP_RECOVERY /dev/sdb1 7836F22A36F1E8D0 ntfs Elements ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /cdrom iso9660 (ro,noatime) /dev/loop1 /rofs squashfs (ro,noatime) /dev/sdb1 /mnt fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) ================================ sda2/boot.ini: ================================ -------------------------------------------------------------------------------- [boot loader] timeout=0 default=C:\CMDCONS\BOOTSECT.DAT [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons -------------------------------------------------------------------------------- ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown GPT Partiton Type c104043000e9b9040dff24b580010100 Unknown GPT Partiton Type 46313020746f20737461727420746865 Unknown GPT Partiton Type 65727920706172746974696f6e207761 Unknown GPT Partiton Type 727920706172746974696f6e0d0a0000 Unknown GPT Partiton Type 000f84e5f7668b162404e82804744066 Unknown GPT Partiton Type ce01e8dc038bfe66391624047505e8d9 Unknown GPT Partiton Type 0345086603f0e881030bd2740333d240 Unknown GPT Partiton Type bece01e8db0287fec645041266895508 Unknown GPT Partiton Type 01f60634010175078b363b01e854f5e8 Unknown GPT Partiton Type 313825740ffec03865107408fec03824 Unknown GPT Partiton Type 02f60634014074088bfdbece01e85101 Unknown GPT Partiton Type 263401f9e894f30f858ef4e8e201e8ec Unknown GPT Partiton Type f7e960f35245434f5645525966606633 Unknown GPT Partiton Type 660faf1e00106603dac3668b0e001066 Unknown GPT Partiton Type 8bfd386d04740583c710e2f6c36660c6 Unknown GPT Partiton Type 04ebf132c0b91000f3aac3bf0c04ebf3 Unknown GPT Partiton Type 02662bc1660fb71e0e02662bc366031e Unknown GPT Partiton Type f4b40ebb0700b901003c08751381ff25 Unknown GPT Partiton Type 534f465448494e4b90653f62011b0100 Unknown GPT Partiton Type 0b050900027777772e68702e636f6d00 Unknown GPT Partiton Type d441a0f5030003000ecb744a08bb3746 Unknown GPT Partiton Type f8579a116b4a7aa931cde97a4b9b5c09 Unknown GPT Partiton Type 7229990415b77c0a1970e7e824237a3a Unknown GPT Partiton Type afb6e34d6b4bd8c7c0eada19a9786cc3 Unknown BootLoader on sda1/Wubi 00000000 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 |0000000000000000| * 00000200 Unknown BootLoader on sda2 00000000 e9 a7 00 52 45 43 4f 56 45 52 59 00 02 08 20 00 |...RECOVERY... .| 00000010 02 00 00 00 00 f8 00 00 3f 00 f0 00 7f b9 f4 11 |........?.......| 00000020 8c cd ac 00 1e 2b 00 00 00 00 00 00 02 00 00 00 |.....+..........| 00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000040 80 00 29 3b 02 cd 01 20 20 20 20 20 20 20 20 20 |..);... | 00000050 20 20 46 41 54 33 32 20 20 20 8b d0 c1 e2 02 80 | FAT32 ......| 00000060 e6 01 66 c1 e8 07 66 3b 46 f8 74 2a 66 89 46 f8 |..f...f;F.t*f.F.| 00000070 66 03 46 f4 66 0f b6 5e 28 80 e3 0f 74 0f 3a 5e |f.F.f..^(...t.:^| 00000080 10 0f 83 90 00 66 0f af 5e 24 66 03 c3 bb e0 07 |.....f..^$f.....| 00000090 b9 01 00 e8 cf 00 8b da 66 8b 87 00 7e 66 25 ff |........f...~f%.| 000000a0 ff ff 0f 66 3d f8 ff ff 0f c3 33 c9 8e d9 8e c1 |...f=.....3.....| 000000b0 8e d1 66 bc f4 7b 00 00 bd 00 7c 66 0f b6 46 10 |..f..{....|f..F.| 000000c0 66 f7 66 24 66 0f b7 56 0e 66 03 56 1c 66 89 56 |f.f$f..V.f.V.f.V| 000000d0 f4 66 03 c2 66 89 46 fc 66 c7 46 f8 ff ff ff ff |.f..f.F.f.F.....| 000000e0 66 8b 46 2c 66 50 e8 af 00 bb 70 00 b9 01 00 e8 |f.F,fP....p.....| 000000f0 73 00 bf 00 07 b1 0b be a9 7d f3 a6 74 2a 03 f9 |s........}..t*..| 00000100 83 c7 15 81 ff 00 09 72 ec 66 40 4a 75 db 66 58 |[email protected]| 00000110 e8 47 ff 72 cf be b4 7d ac 84 c0 74 09 b4 0e bb |.G.r...}...t....| 00000120 07 00 cd 10 eb f2 cd 19 66 58 ff 75 09 ff 75 0f |........fX.u..u.| 00000130 66 58 bb 00 20 66 83 f8 02 72 da 66 3d f8 ff ff |fX.. f...r.f=...| 00000140 0f 73 d2 66 50 e8 50 00 0f b6 4e 0d e8 16 00 c1 |.s.fP.P...N.....| 00000150 e1 05 03 d9 66 58 53 e8 00 ff 5b 72 d8 8a 56 40 |....fXS...[r..V@| 00000160 ea 00 00 00 20 66 60 66 6a 00 66 50 53 6a 00 66 |.... f`fj.fPSj.f| 00000170 68 10 00 01 00 8b f4 b8 00 42 8a 56 40 cd 13 be |h........B.V@...| 00000180 c7 7d 72 94 67 83 44 24 06 20 66 67 ff 44 24 08 |.}r.g.D$. fg.D$.| 00000190 e2 e3 83 c4 10 66 61 c3 66 48 66 48 66 0f b6 56 |.....fa.fHfHf..V| 000001a0 0d 66 f7 e2 66 03 46 fc c3 4e 54 4c 44 52 20 20 |.f..f.F..NTLDR | 000001b0 20 20 20 20 0d 0a 4e 6f 20 53 79 73 74 65 6d 20 | ..No System | 000001c0 44 69 73 6b 20 6f 72 0d 0a 44 69 73 6b 20 49 2f |Disk or..Disk I/| 000001d0 4f 20 65 72 72 6f 72 0d 0a 50 72 65 73 73 20 61 |O error..Press a| 000001e0 20 6b 65 79 20 74 6f 20 72 65 73 74 61 72 74 0d | key to restart.| 000001f0 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== umount: /isodevice: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1))

  Read the article

• Terminal error messages: bash: /dev/cgroup/cpu/user/2823/tasks: No such file or directory

  - by sasaenator

  This is what I get when I start up the terminal: bash: /dev/cgroup/cpu/user/2823/tasks: No such file or directory bash: /dev/cgroup/cpu/user/2823/notify_on_release: No such file or directory bash: /dev/cgroup/cpu/user/2823/tasks: No such file or directory bash: /dev/cgroup/cpu/user/2823/notify_on_release: No such file or directory sasa@sasa:~$*** I reinstalled 10.10 yesterday because of other problems, I didn't have this error message before. I have a separate /home partition, and new installation picked up almost all of the old settings, also those which I don't like, but it looks like that is not a problem or maybe I am wrong? Wouldn't ask if I knew! :) I'll be glad to post more info if someone needs it!

  Read the article

• Microsoft Dev Centre accounts

  - by Phil Murray

  Looks like Microsoft is offering a special offer of 95% of the yearly subscription for the Phone Dev Centre (I didn't say anything about desperate). What I was wondering is do you need a seperate account to publish to the Windows Phone app centre and the Windows App Centre? Also I heard some horror stories about the time it takes to get application published on the Windows phone marketplace, does anyone have any experience with this? Windows Phone Dev Centre Windows App Dev Centre

  Read the article

• A Multi-Channel Contact Center Can Reduce Total Cost of Ownership

  - by Tom Floodeen

  In order to remain competitive in today’s market, CRM customers need to provide feature-rich superior call center experience to their customers across all communication channels while improving their service agent productivity. They also require their call center to be deeply integrated with their CRM system; and they need to implement all this quickly, seamlessly, and without breaking the bank. Oracle’s Siebel Customer Relationship Management (CRM) is the world’s leading application suite for automated customer-facing operations for Sales and Marketing and for managing all aspects of providing service to customers. Oracle’s Contact On Demand (COD) is a world-class carrier grade hosted multi-channel contact center solution that can be deployed in days without up-front capital expenditures or integration costs. Agents can work efficiently from anywhere in the world with 360-degree views into customer interactions and real-time business intelligence. Customers gain from rapid and personalized sales and service, while organizations can dramatically reduce costs and increase revenues Oracle’s latest update of Siebel CRM now comes pre-integrated with Oracle’s Contact On Demand. This solution seamlessly runs fully-functional contact center provided by a single vendor, significantly reducing your total cost of ownership. This solution supports Siebel 7.8 and higher for Voice and Siebel 8.1 and higher for Voice and Siebel CRM Chat.  The impressive feature list of Oracle’s COD solution includes full-control CTI toolbar with Voice, Chat, and Click to Dial features.  It also includes context-sensitive screens, automated desktops, built-in IVR, Multidimensional routing, Supervisor and Quality monitoring, and Instant Provisioning. The solution also ships with Extensible Web Services interface for implementing more complex business processes. Click here to learn how to reduce complexity and total cost of ownership of your contact center. Contact Ann Singh at [email protected] for additional information.

  Read the article

• New Information Center - Reviewing Security For FMW 11g

  - by Daniel Mortimer

  Announcing ... Information Center: Reviewing Security For Oracle Fusion Middleware 11g [ID 1458051.2] has been published.  Screenshot of ID 1458051.2 What is an Information Center? Information Centers use widgets to aggregate knowledge content, such as support documents, product documentation, support community threads, which is pertinent to a given task or intent. Widgets either contain static lists or better still some widgets are dynamic. A dynamic widget uses a query criteria to present a list of support documents relevant to the title / subject matter of the widget. The content of a dynamic widget is refreshed automatically every 24 hours. Once you are in an Information Center, you can use the left hand menu to navigate to other Tasks / Intent Information Centers (e.g "Install and Configure", "Patch", "Troubleshoot", "Upgrade" which are available for the chosen product. Are Information Centers easy to find? You can go straight to the new "Reviewing Security" Information Center by using the hyperlink given above. There are, however, two other methods which make Information Centers easier to find. Browse Knowledge Refine Your Search Browse Knowledge The "Browse Knowledge" is currently found in the "Knowledge" Tab Page in My Oracle Support. As illustrated by the screenshots below, you can find Information Centers by choosing a product (e.g "Oracle Fusion Middleware"), a version and an action / intent. If an Information Center exists for your selection the "Advisor Found" button is enabled. Clicking on this button will take you straight to the desired Information Center.Screenshot - Browse Knowledge 1 Screenshot - Browse Knowledge 2 Screenshot - Browse Knowledge 3 Refine Your Search Refine your search is a dialogue which is triggered by certain keywords that you may enter into the Global Search field in the top right hand corner of My Oracle Support. The "Refine Your Search" works in a similar manner to "Browse Knowledge". Choose your product and version. The appropriate Task / Intent should already be selected for you. Thereafter, click the Go button. Screenshot - Refine Your Search 1 Screenshot - Refine Your Search 2 Screenshot - Refine Your Search 3

  Read the article

• Oracle Vanquisher: A Data Center Optimization Adventure to Debut at Oracle OpenWorld

  - by Oracle OpenWorld Blog Team

  Heat. Downtime. Site-wide outages. Legacy hardware. Security holes. These are all threats to your data center. What if you could vanquish them to simplify your IT and accelerate business innovation and growth? Find out how - play Oracle Vanquisher, a new data center optimization video game that will be showcased at Oracle OpenWorld (Hardware DEMOgrounds, Moscone South Hall).Playing Oracle Vanquisher, you'll be armed with a cool Oracle vacuum pack suit and a strategic IT roadmap. You'll thwart threats and optimize your data center to increase your company’s stock price and boost your company’s position. Of course, optimizing your data center is far more than a great game. For more information, visit the Oracle Optimized Data Center homepage or check out these targeted Oracle OpenWorld keynotes and sessions:KeynotesShift Complexity, with Oracle President Mark HurdMonday, October 1, 8:00 a.m. - 9:30 a.m.Moscone North, Hall DOracle Cloud Infrastructure and Engineered Systems: Fast, Reliable, Virtualized, with Oracle Executive Vice President John FowlerWednesday, October 3, 8:00 a.m. - 9:45 a.m.Moscone North, Hall DSessions Oracle Linux Oracle Optimized Solutions Oracle Solaris SPARC Servers Storage SPARC SuperCluster Oracle VM Server Virtualization Desktop Virtualization

  Read the article

• Launching Ops Center 12c

  - by user12601629

  Oracle Enterprise Manager Ops Center 12c is most ambitious version of the Ops Center tooling that we've ever released. I think that make it appropriate that we launched it in grand style! When it became clear we were going to be complete with the 12c final release about this time of year, the marketing team proposed that we roll the launch of 12c into Oracle OpenWorld Tokyo.  I thought that sounded like a fine idea!  You see, I have always loved Japan.  I even studied a bit of Japanese language back in school. OpenWorld Tokyo was an outstanding even this year.  It was held in Roppongi, one of the most stylish districts in Tokyo. And, to make things even better, the Sakura (cherry blossoms) were blooming.  If you've never been in Japan for cherry blossom season, it's a must see!  Here are a couple of pics for you. Here is a picture from Roppongi, near the conference.  Here's a picture near the Imperial Palace.  A couple of friends from the local sales team took me here before my flight out. So, now back to the product launch! We choose to launch the product in John Fowler's "Engineered Systems" keynote address.  It made perfect sense because of the close ties of Ops Center to the Systems portfolio of products.  It was a packed house for the keynote.  Here's a picture I took just before we started -- there were also hundreds more people in "overflow" rooms in other parts of the venue. Here's a picture of me on stage during the launch. While there are countless new features in Ops Center 12c that customers will love, I had to limit myself to discussing just three. Mission Critical Clouds Solaris 11 Engineered Systems So, what does Mission Critical Cloud mean?  It means we've expanded EM's cloud capabilities in a couple of key areas. First, we've expanded the "self service provisioning" capabilities we have to include SPARC -- not just x86.  Now you can build clouds of Solaris Zones with ease!  Second, we've much more deeply integrated high-end storage and network management into the cloud layers.  These may our IaaS story is now much more powerful! For Solaris 11, we didn't simply port our monitoring agent to S11.  That would have been easy, but also boring! We support S11 deeply.  Full access to the power of the IPS packaging system, the new virtualized networking stack, new Zones features, the Auto Install framework.  If you're ready to try Solaris 11 then Ops Center is ready for you. Last is on the area of Engineered Systems.  These combinations of hardware and software are fast and powerful. However, we're also on a mission to make them ever easier to manage.  We've made major strides with Ops Center 12c. Manage these systems as racks, not individual components.  The new capabilities for the new engineered systems like Exalogic and SPARC SuperCluster and striking. You can read more here: Oracle Unveils Oracle Enterprise Manager Ops Center 12c So, I'll wrap this up with one final bit of fun. One of my friends from the Oracle marketing department found a super cool place to get dinner.  It's a restaurant called Gonpachi. It turns out this is the place that inspired the scene in the Quentin Taratino movie Kill Bill where Uma Thurman fights 88 Ninjas.  Here is a picture I snapped while we were there. It was surely a good time. Check it out next time you're in Tokyo.

  Read the article

• [GEEK SCHOOL] Network Security 7: Using the Action Center for Extra Security and Maintenance

  - by Ciprian Rusen

  In this lesson we will talk about another lesser-known security tool in Windows – the “Action Center”. This tool that has an impact on both how secure your system is and how well it is running from a maintenance perspective. The Action Center first made its appearance all the way back in Windows XP as the “Windows Security Center” and was such through Vista until being renamed in Windows 7.Click Here to Continue Reading

  Read the article

• Can't install lib32ncurses5-dev or ia32-libs

  - by tito_drum

  I'm trying to install Android source and I keep getting this error. I kept with the installation but seems these packages are sort of required to have a complete and successful installation. this is my error Package lib32ncurses5-dev is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source Package ia32-libs is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'lib32ncurses5-dev' has no installation candidate E: Package 'ia32-libs' has no installation candidate E: Unable to locate package lib32readline5-dev E: Unable to locate package lib32z-dev I have a VM with Ubuntu on Intel® Core™ i5-2300 CPU @ 2.80GHz and 32-bit system

  Read the article

• cannot add or remove programs using ubuntu software center (USC)in Kubuntu 12.04

  - by Suhail cholassery

  I am using Kubuntu 12.04,currently.Recently ,I updated my system with update manager and downloaded USC from muon software center which was pre-installed in this system. I could download a lot of softwares such as: -firefox -XBMC media center -VLC media player But when I tried to get some more softwares using USC, after rebooting there began the problem . It does not begin either downloading or instaling the program. When I tried to download the same program using muon software center it showed the following: Unable to obtain the package at this time Another application seems to be using the package system at this time. You must close all other package managers before you will be able to install or remove any packages. I am quite sure that have closed USC . I tried to remove USC, assuming that it caused the problem using muon software center but the result was same.Now I cannot add or remove any programs into my system & I don't know what to do . Please help me as soon as possible.

  Read the article

• GRUB not showing /dev/sda2 is Windows 7 Loader

  - by Ricardo

  A few days ago I accidentally deleted Ubuntu partition using GParted. I thought Windows 7 would start normally, but I got a "grub-rescue" screen instead. Then, I recreated a partition for Ubuntu (/dev/sda6) and reinstalled it. Ubuntu starts properly now; but GRUB shows me /dev/sda2 is Windows Recovery System (WRS), what is false, since /dev/sda1 is WRS and /dev/sda2 is Windows 7 Loader. I booted using Windows 7 disk and tried to correct this problem automatically and by bootrec.exe /fixboot and /fixmbr, and nothing is able to fix my problem. Yet, Windows (disk) says there is no OS in my computer. What should I do? Will I have to erase my hard disk to get Windows 7 back?

  Read the article

• Oracle's Contact Center Anywhere Solution and How it Fits Into the CRM Footprint

  Wendell Black, Vice President of Sales for Contact Center Anywhere, tells us how customers can benefit from Oracle's all encompassing Contact Center solution.

  Read the article

• Automating HP Quality Center with Python or Java

  - by Hari

  Hi, We have a project that uses HP Quality Center and one of the regular issues we face is people not updating comments on the defect. So I was thinkingif we could come up with a small script or tool that could be used to periodically throw up a reminder and force the user to update the comments. I came across the Open Test Architecture API and was wondering if there are any good Python or java examples for the same that I could see. Thanks Hari

  Read the article

• How to center the contents of a uiwebview on the iPhone

  - by Buffernet

  Hi, I have a map image in a uiwebview. It default loads in the top left hand corner. I would like it to initialize in the center of the uiwebview. Does anyone know how to do this? Thanks!

  Read the article

• Linux boot on a raid1 software raid ?

  - by azera

  Hello I am trying to convert my single disk boot to a raid1 boot So far here is what i have: I sucessfully create the raid 1 as degraded with the new drive alone, I copied all the data on it I can mount that raid 1, see its files etc I already have a raid5 that is working on the same box (although not booting on it) I have installed grub on both drive When grub boot, it loads the kernel alright, but during the kernel boot it fails to load the "root block device" The kernel tells me : 1 - detected that root device is an md device 2 - determining root devices 3 - mounting root 4 - mounting /dev/md125 on /newroot failed: input/output error. Please enter another root device: ... At this point, if I enter /dev/sda3 (my "old" root device that isn't converted to raid yet) everything boots fine without the root. The /dev/md125 device is indeed created but it seems to be created after the error happens, as in it creates it after loading the device, when mdadm is loaded. Somehow it looks like it can't/doesn't load the raid array before it needs to mount it, and I don't know how I can solve that. My config files (taken from the system once it boots with sda3 as root device): $ cat /etc/mdadm.conf ARRAY /dev/md/md0-r5 metadata=0.90 UUID=1a118934:c831bdb3:64188b84:66721085 ARRAY /dev/md125 metadata=0.90 UUID=48ec4190:a80d4dde:64188b84:66721085 $ cat /proc/mdstat Personalities : [raid1] [raid6] [raid5] [raid4] [raid0] [raid10] md125 : active raid1 sdc3[1] 477853312 blocks [2/1] [_U] md127 : active raid5 sdd[0] sdf[3] sdb[2] sde[1] 4395415488 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU] unused devices: <none> $ cat /boot/grub/menu.lst default 0 timeout 8 splashimage=(hd0,0)/boot/grub/splash.xpm.gz title Gentoo Linux 2.6.31-r10 root (hd0,0) #kernel /boot/kernel-genkernel-x86_64-2.6.31-gentoo-r10 root=/dev/ram0 real_root=/dev/sda3 kernel /boot/kernel-genkernel-x86_64-2.6.31-gentoo-r10 root=/dev/md125 md=125,/dev/sdc3,/dev/sda3 initrd /boot/initramfs-genkernel-x86_64-2.6.31-gentoo-r10 # blkid /dev/sda1: UUID="89fee223-b845-4e0a-8a0b-e6cf695d5bcf" TYPE="ext2" /dev/sda2: UUID="a72296a8-d7d4-447f-a34b-ee920fd1a767" TYPE="swap" /dev/sda3: UUID="97eb0a6a-c385-4a9d-bf74-c0bab1fa4dc1" TYPE="ext3" /dev/sdb: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sdc1: UUID="d36537fd-19a0-b8a3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sdd: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sde: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/md127: UUID="13a41589-4cf1-4c04-91ca-37484182c783" TYPE="ext4" /dev/sdf: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sdc2: UUID="a1916397-1b48-45d7-9f98-73aa521e882f" TYPE="swap" /dev/sdc3: UUID="48ec4190-a80d-4dde-6418-8b8466721085" TYPE="linux_raid_member" /dev/md125: UUID="c947ed64-1d4d-4d1d-b4d2-24669fff916e" SEC_TYPE="ext2" TYPE="ext3" # mdadm -E mdadm: No devices to examine # fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe975e9fc Device Boot Start End Blocks Id System /dev/sda1 1 5 40131 83 Linux /dev/sda2 6 1311 10490445 82 Linux swap / Solaris /dev/sda3 1312 60801 477853425 83 Linux Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe975e9fc Device Boot Start End Blocks Id System /dev/sdc1 1 5 40131 83 Linux /dev/sdc2 6 1311 10490445 82 Linux swap / Solaris /dev/sdc3 1312 60801 477853425 83 Linux Disk /dev/md125: 489.3 GB, 489321791488 bytes 2 heads, 4 sectors/track, 119463328 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk identifier: 0x00000000 Disk /dev/md125 doesn't contain a valid partition table

  Read the article

• Booting Fedora guest VBox on /dev/mapper/vg0-fc17-root

  - by NevilleDNZ

  I already have the following logical volumes: host:/dev/mapper/vg0-fc17-boot (guestOS:/dev/hdb) formatted as ext4 (no partition table) host:/dev/mapper/vg0-fc17-root (guestOS:/dev/hdc) formatted as ext4 (no partition table) Do I have to create the following grub partition to boot a guest VM under VirtualBox? host:/dev/mapper/vg-fc17-mbr (guestOS:/dev/hda) with a partition table and install grub MBR here? Or is there a better way? (Maybe grub on vg0-fc17-boot?)

  Read the article

• Ubuntu: move logs from /dev/tty8 to different terminal /dev/tty12 or get rid of it.

  - by Casual Coder

  I want to know how to move or get rid of /dev/tty8 log output in Ubuntu 9.10. /dev/tty7 is my regular X session. When I am switching user to test account where I can try and test setups and configs I am at next available console i.e. /dev/tty9 because /dev/tty8 is taken by log output. Where can I configure this ? All I've found related to /dev/tty8 is commented lines in /etc/rsyslog.d/50-default.conf. I changed it like that: daemon,mail.*;\ news.=crit;news.=err;news.=notice;\ *.=debug;*.=info;\ *.=notice;*.=warn /dev/tty12 And I've got nice log output on /dev/tty12 but where is configuration for log output on /dev/tty8. How can I change it?

  Read the article

• How can I get rid of the motd message "*** /dev/sdb1 will be checked for errors at next reboot ***"? [duplicate]

  - by kmm

  This question already has an answer here: Persistent “disk will be checked…” in the message of the day (motd) even after reboot 3 answers My motd persistently has: *** /dev/sdb1 will be checked for errors at next reboot *** The problem is that I don't have /dev/sdb1 on my system. I only have /dev/sdb2 (mouted as /) and /dev/sda1 which mounts to /media/backup. I delete that line from /etc/motd, but it reappears after reboot. Here's my df output: Filesystem Size Used Avail Use% Mounted on /dev/sdb2 73G 3.7G 66G 6% / udev 490M 4.0K 490M 1% /dev tmpfs 200M 760K 199M 1% /run none 5.0M 0 5.0M 0% /run/lock none 498M 0 498M 0% /run/shm /dev/sda1 1.9T 429G 1.4T 25% /media/backup Update Here is the output of sudo fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dfc2 Device Boot Start End Blocks Id System /dev/sda1 63 3907024064 1953512001 83 Linux Disk /dev/sdb: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00049068 Device Boot Start End Blocks Id System /dev/sdb1 152301568 156301311 1999872 82 Linux swap / Solaris /dev/sdb2 * 2048 152301567 76149760 83 Linux Partition table entries are not in disk order I guess /dev/sdb1 is my swap space.

  Read the article

• [IOS SDK] Sending Data to Other Players - Game Center

  - by mohacs

  Hi guys, I am developing a simple game center multiplayer game. i did manage almost everything except sending messeage to players. what i mean, i can invite player to play game, game is starts etc. regarding apple documentation i am using following method to send data but it' doesn't work at all. const char *bytes = "123"; NSData *packet = [NSData dataWithBytes:&bytes length:3]; [myMatch sendDataToAllPlayers: packet withDataMode: GKMatchSendDataUnreliable error:nil]; if possible a working sample would be great. many thanks.

  Read the article

• Windows Media Center 6 Development on Vista

  - by Clever Human

  I have two development machines -- one is Windows 7, the other is Windows Vista. Depending on where I am in my house is which machine I use. I am writing a Windows Media Center 6 (which ships as part of Windows 7) application. I installed the WMC6 SDK on my Windows 7 machine with no issues. However, when I try and install it on my Vista machine, I am told the WMC6 SDK cannot be installed on Vista. So my questions are: How can I develop a WMC6 app on Vista? If I use the Vista version of the SDK (WMC5.3 SDK) will I be able to edit / compile and test the same application from each machine. I imagine the answer to the second question is "no" because the API changed between those two versions. So can I only work on this application from my Windows 7 machine? That really sucks if it is true!

  Read the article

• how to center text vertically in html using css only

  - by stanleyxu2005

  Hi All, i have a very simple html. due to some limitations, i cannot modify the html content. I want to center the text vertically only using css. <html> <head>...</head> <body> <div>Ops, the webpage is currently not available</div> </body> </html> Note that the size of the html can be variable. In additional, if the text cannot be displayed in one line, it should be broken into multiple lines. Is it possible?

  Read the article

• CSS center page on screen

  - by Kostronor

  //sorry for the bad formating, i am on my phone... When someone asks how to center a page, then the response is like: margin-left:50%; left:(-1/2 width); I used this code on a site with a width of 1000px,so it comes to screens, where this site does not fit. Now the site gets centered on the smaller screen and gets equaly pushet to left and right. So lets say, our screen is 600px wide: 200px are left 600px are on screen 200px are right You can scroll to the right, but the pixels on the left are unreachable... How can i solve this to control, how much of my site gets dragged to the left in case of smaller screens? This is especially important for mobile phones...

  Read the article

• Another "Windows 7 entry missing from Grub2" Question

  - by 4x10

  Like many before me had the following problem that after installing Ubuntu (with windows 7 already installed), the grub boot loader wouldnt show windows 7 as a boot option, though i can boot fine if I use the "Choose Boot Device" options on the x220. The difference is that I try using UEFI only so many answers didn't really fit my problem, though i tried several stuffs: after running boot repair it destroyed the ubuntu boot loader custom entry in /etc/grub.d/40_custom for windows which doesnt show up many update-grub and reboots trying windows repair recovery thing while being there i also did bootrec.exe /FixBoot and update-grub and reboot again and finaly because it was so much fun, i installed linux all over again, while formatting and deleting everything linux related before that. Now that i think of it, Ubuntu also didn't notice Windows being there during the Setup and it still doesnt according to the Boot Info from Boot Repair. Boot Info Script 0.61-git-patched [23 April 2012] ============================= Boot Info Summary: =============================== => No boot loader is installed in the MBR of /dev/sda. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Windows 7: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /efi/Boot/bootx64.efi /efi/ubuntu/grubx64.efi sda2: __________________________________________________________________________ File system: Boot sector type: - Boot sector info: Mounting failed: mount: unknown filesystem type '' sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exe sda4: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu precise (development branch) Boot files: /boot/grub/grub.cfg /etc/fstab sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sda6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 1 625,142,447 625,142,447 ee GPT GUID Partition Table detected. Partition Start Sector End Sector # of Sectors System /dev/sda1 2,048 206,847 204,800 EFI System partition /dev/sda2 206,848 468,991 262,144 Microsoft Reserved Partition (Windows) /dev/sda3 468,992 170,338,303 169,869,312 Data partition (Windows/Linux) /dev/sda4 170,338,304 330,338,304 160,000,001 Data partition (Windows/Linux) /dev/sda5 330,338,305 617,141,039 286,802,735 Data partition (Windows/Linux) /dev/sda6 617,141,040 625,141,040 8,000,001 Swap partition (Linux) "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 885C-ED1B vfat /dev/sda3 EE06CC0506CBCCB1 ntfs /dev/sda4 604dd3b2-64ca-4200-b8fb-820e8d0ca899 ext4 /dev/sda5 d62515fd-8120-4a74-b17b-0bdf244124a3 ext4 /dev/sda6 7078b649-fb2a-4c59-bd03-fd31ef440d37 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda1 /boot/efi vfat (rw) /dev/sda4 / ext4 (rw,errors=remount-ro) /dev/sda5 /home ext4 (rw) =========================== sda4/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod efi_gop insmod efi_uga insmod video_bochs insmod video_cirrus } insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux /boot/vmlinuz-3.2.0-20-generic root=UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-20-generic } menuentry 'Ubuntu, with Linux 3.2.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 echo 'Loading Linux 3.2.0-20-generic ...' linux /boot/vmlinuz-3.2.0-20-generic root=UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-20-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda4/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda4 during installation UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 / ext4 errors=remount-ro 0 1 # /boot/efi was on /dev/sda1 during installation UUID=885C-ED1B /boot/efi vfat defaults 0 1 # /home was on /dev/sda5 during installation UUID=d62515fd-8120-4a74-b17b-0bdf244124a3 /home ext4 defaults 0 2 # swap was on /dev/sda6 during installation UUID=7078b649-fb2a-4c59-bd03-fd31ef440d37 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda4: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 129.422874451 = 138.966753280 boot/grub/grub.cfg 1 83.059570312 = 89.184534528 boot/initrd.img-3.2.0-20-generic 2 101.393131256 = 108.870045696 boot/vmlinuz-3.2.0-20-generic 1 83.059570312 = 89.184534528 initrd.img 2 101.393131256 = 108.870045696 vmlinuz 1 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-04-25__23h40 =================== boot-repair version : 3.18-0ppa3~precise boot-sav version : 3.18-0ppa4~precise glade2script version : 0.3.2.1-0ppa7~precise internet: connected python-software-properties version : 0.82.7 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 591 not upgraded. dpkg-preconfigure: unable to re-open stdin: No such file or directory boot-repair is executed in installed-session (Ubuntu precise (development branch) , precise , Ubuntu , x86_64) WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== OSPROBER: /dev/sda4:The OS now in use - Ubuntu precise (development branch) CurrentSession:linux =================== BLKID: /dev/sda3: UUID="EE06CC0506CBCCB1" TYPE="ntfs" /dev/sda1: UUID="885C-ED1B" TYPE="vfat" /dev/sda4: UUID="604dd3b2-64ca-4200-b8fb-820e8d0ca899" TYPE="ext4" /dev/sda5: UUID="d62515fd-8120-4a74-b17b-0bdf244124a3" TYPE="ext4" /dev/sda6: UUID="7078b649-fb2a-4c59-bd03-fd31ef440d37" TYPE="swap" 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted. =================== /etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 #GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" EFI_OF_PART[1] (, ) =================== dmesg | grep EFI : [ 0.000000] EFI v2.00 by Lenovo [ 0.000000] Kernel-defined memdesc doesn't match the one from EFI! [ 0.000000] EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ 0.000000] EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000004e000) (0MB) [ 0.000000] EFI: mem02: type=3, attr=0xf, range=[0x000000000004e000-0x0000000000058000) (0MB) [ 0.000000] EFI: mem03: type=10, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB) [ 0.000000] EFI: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005e000) (0MB) [ 0.000000] EFI: mem05: type=4, attr=0xf, range=[0x000000000005e000-0x000000000005f000) (0MB) [ 0.000000] EFI: mem06: type=3, attr=0xf, range=[0x000000000005f000-0x00000000000a0000) (0MB) [ 0.000000] EFI: mem07: type=2, attr=0xf, range=[0x0000000000100000-0x00000000005b9000) (4MB) [ 0.000000] EFI: mem08: type=7, attr=0xf, range=[0x00000000005b9000-0x0000000020000000) (506MB) [ 0.000000] EFI: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB) [ 0.000000] EFI: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x00000000364e4000) (354MB) [ 0.000000] EFI: mem11: type=2, attr=0xf, range=[0x00000000364e4000-0x000000003726a000) (13MB) [ 0.000000] EFI: mem12: type=7, attr=0xf, range=[0x000000003726a000-0x0000000040000000) (141MB) [ 0.000000] EFI: mem13: type=0, attr=0xf, range=[0x0000000040000000-0x0000000040200000) (2MB) [ 0.000000] EFI: mem14: type=7, attr=0xf, range=[0x0000000040200000-0x000000009df35000) (1501MB) [ 0.000000] EFI: mem15: type=2, attr=0xf, range=[0x000000009df35000-0x00000000d39a0000) (858MB) [ 0.000000] EFI: mem16: type=4, attr=0xf, range=[0x00000000d39a0000-0x00000000d39c0000) (0MB) [ 0.000000] EFI: mem17: type=7, attr=0xf, range=[0x00000000d39c0000-0x00000000d5df5000) (36MB) [ 0.000000] EFI: mem18: type=4, attr=0xf, range=[0x00000000d5df5000-0x00000000d6990000) (11MB) [ 0.000000] EFI: mem19: type=7, attr=0xf, range=[0x00000000d6990000-0x00000000d6b82000) (1MB) [ 0.000000] EFI: mem20: type=1, attr=0xf, range=[0x00000000d6b82000-0x00000000d6b9f000) (0MB) [ 0.000000] EFI: mem21: type=7, attr=0xf, range=[0x00000000d6b9f000-0x00000000d77b0000) (12MB) [ 0.000000] EFI: mem22: type=4, attr=0xf, range=[0x00000000d77b0000-0x00000000d780a000) (0MB) [ 0.000000] EFI: mem23: type=7, attr=0xf, range=[0x00000000d780a000-0x00000000d7826000) (0MB) [ 0.000000] EFI: mem24: type=4, attr=0xf, range=[0x00000000d7826000-0x00000000d7868000) (0MB) [ 0.000000] EFI: mem25: type=7, attr=0xf, range=[0x00000000d7868000-0x00000000d7869000) (0MB) [ 0.000000] EFI: mem26: type=4, attr=0xf, range=[0x00000000d7869000-0x00000000d786a000) (0MB) [ 0.000000] EFI: mem27: type=7, attr=0xf, range=[0x00000000d786a000-0x00000000d786b000) (0MB) [ 0.000000] EFI: mem28: type=4, attr=0xf, range=[0x00000000d786b000-0x00000000d786c000) (0MB) [ 0.000000] EFI: mem29: type=7, attr=0xf, range=[0x00000000d786c000-0x00000000d786d000) (0MB) [ 0.000000] EFI: mem30: type=4, attr=0xf, range=[0x00000000d786d000-0x00000000d825f000) (9MB) [ 0.000000] EFI: mem31: type=7, attr=0xf, range=[0x00000000d825f000-0x00000000d8261000) (0MB) [ 0.000000] EFI: mem32: type=4, attr=0xf, range=[0x00000000d8261000-0x00000000d82f7000) (0MB) [ 0.000000] EFI: mem33: type=7, attr=0xf, range=[0x00000000d82f7000-0x00000000d82f8000) (0MB) [ 0.000000] EFI: mem34: type=4, attr=0xf, range=[0x00000000d82f8000-0x00000000d8705000) (4MB) [ 0.000000] EFI: mem35: type=7, attr=0xf, range=[0x00000000d8705000-0x00000000d8706000) (0MB) [ 0.000000] EFI: mem36: type=4, attr=0xf, range=[0x00000000d8706000-0x00000000d8761000) (0MB) [ 0.000000] EFI: mem37: type=7, attr=0xf, range=[0x00000000d8761000-0x00000000d8768000) (0MB) [ 0.000000] EFI: mem38: type=4, attr=0xf, range=[0x00000000d8768000-0x00000000d9b9f000) (20MB) [ 0.000000] EFI: mem39: type=7, attr=0xf, range=[0x00000000d9b9f000-0x00000000d9e4c000) (2MB) [ 0.000000] EFI: mem40: type=2, attr=0xf, range=[0x00000000d9e4c000-0x00000000d9e52000) (0MB) [ 0.000000] EFI: mem41: type=3, attr=0xf, range=[0x00000000d9e52000-0x00000000da59f000) (7MB) [ 0.000000] EFI: mem42: type=5, attr=0x800000000000000f, range=[0x00000000da59f000-0x00000000da6c3000) (1MB) [ 0.000000] EFI: mem43: type=5, attr=0x800000000000000f, range=[0x00000000da6c3000-0x00000000da79f000) (0MB) [ 0.000000] EFI: mem44: type=6, attr=0x800000000000000f, range=[0x00000000da79f000-0x00000000da8b1000) (1MB) [ 0.000000] EFI: mem45: type=6, attr=0x800000000000000f, range=[0x00000000da8b1000-0x00000000da99f000) (0MB) [ 0.000000] EFI: mem46: type=0, attr=0xf, range=[0x00000000da99f000-0x00000000daa22000) (0MB) [ 0.000000] EFI: mem47: type=0, attr=0xf, range=[0x00000000daa22000-0x00000000daa9b000) (0MB) [ 0.000000] EFI: mem48: type=0, attr=0xf, range=[0x00000000daa9b000-0x00000000daa9c000) (0MB) [ 0.000000] EFI: mem49: type=0, attr=0xf, range=[0x00000000daa9c000-0x00000000daa9f000) (0MB) [ 0.000000] EFI: mem50: type=10, attr=0xf, range=[0x00000000daa9f000-0x00000000daadd000) (0MB) [ 0.000000] EFI: mem51: type=10, attr=0xf, range=[0x00000000daadd000-0x00000000dab9f000) (0MB) [ 0.000000] EFI: mem52: type=9, attr=0xf, range=[0x00000000dab9f000-0x00000000dabdc000) (0MB) [ 0.000000] EFI: mem53: type=9, attr=0xf, range=[0x00000000dabdc000-0x00000000dabff000) (0MB) [ 0.000000] EFI: mem54: type=4, attr=0xf, range=[0x00000000dabff000-0x00000000dac00000) (0MB) [ 0.000000] EFI: mem55: type=7, attr=0xf, range=[0x0000000100000000-0x000000021e600000) (4582MB) [ 0.000000] EFI: mem56: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB) [ 0.000000] EFI: mem57: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) [ 0.000000] ACPI: UEFI 00000000dabde000 0003E (v01 LENOVO TP-8D 00001280 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dabdd000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dabdc000 00292 (v01 LENOVO TP-8D 00001280 PTL 00000002) [ 0.795807] fb0: EFI VGA frame buffer device [ 1.057243] EFI Variables Facility v0.08 2004-May-17 [ 9.122104] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver ReadEFI: /dev/sda , N 128 , 0 , , PRStart 1024 , PRSize 128 WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== PARTITIONS & DISKS: sda4 : sda, not-sepboot, grubenv-ok grub2, grub-efi, update-grub, 64, with-boot, is-os, gpt-but-not-EFI, fstab-has-bad-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, apt-get, grub-install, . sda3 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, gpt-but-not-EFI, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /mnt/boot-sav/sda3. sda1 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /boot/efi. sda5 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, gpt-but-not-EFI, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /home. sda : GPT-BIS, GPT, no-BIOS_boot, has-correctEFI, 2048 sectors * 512 bytes =================== PARTED: Model: ATA HITACHI HTS72323 (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 106MB 105MB fat32 EFI system partition boot 2 106MB 240MB 134MB Microsoft reserved partition msftres 3 240MB 87.2GB 87.0GB ntfs Basic data partition 4 87.2GB 169GB 81.9GB ext4 5 169GB 316GB 147GB ext4 6 316GB 320GB 4096MB linux-swap(v1) =================== MOUNT: /dev/sda4 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda1 on /boot/efi type vfat (rw) /dev/sda5 on /home type ext4 (rw) gvfs-fuse-daemon on /home/vierlex/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=vierlex) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /sys/block/sda: alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 size slaves stat subsystem trace uevent /dev: agpgart autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sg0 shm snapshot snd stderr stdin stdout tpm0 uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 watchdog zero /dev/mapper: control /boot/efi: EFI /boot/efi/EFI: Boot Microsoft ubuntu /boot/efi/efi: Boot Microsoft ubuntu /boot/efi/efi/Boot: bootx64.efi /boot/efi/efi/ubuntu: grubx64.efi WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== DF: Filesystem Type Size Used Avail Use% Mounted on /dev/sda4 ext4 77G 4.1G 69G 6% / udev devtmpfs 3.9G 12K 3.9G 1% /dev tmpfs tmpfs 1.6G 864K 1.6G 1% /run none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 3.9G 152K 3.9G 1% /run/shm /dev/sda1 vfat 96M 18M 79M 19% /boot/efi /dev/sda5 ext4 137G 2.2G 128G 2% /home /dev/sda3 fuseblk 81G 30G 52G 37% /mnt/boot-sav/sda3 =================== FDISK: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf34fe538 Device Boot Start End Blocks Id System /dev/sda1 1 625142447 312571223+ ee GPT =================== Before mainwindow FSCK no PASTEBIN yes WUBI no WINBOOT yes recommendedrepair, purge, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge UNHIDEBOOT_ACTION yes (10s), noflag () PART_TO_REINSTALL_GRUB sda4, FORCE_GRUB no (sda) REMOVABLEDISK no USE_SEPARATEBOOTPART no (sda3) grub2 () UNCOMMENT_GFXMODE no ATA ADD_KERNEL_OPTION no (acpi=off) MBR_TO_RESTORE ( ) EFI detected. Please check the options. =================== Actions FSCK no PASTEBIN yes WUBI no WINBOOT no bootinfo, nombraction, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge UNHIDEBOOT_ACTION no (10s), noflag () PART_TO_REINSTALL_GRUB sda4, FORCE_GRUB no (sda) REMOVABLEDISK no USE_SEPARATEBOOTPART no (sda3) grub2 () UNCOMMENT_GFXMODE no ATA ADD_KERNEL_OPTION no (acpi=off) MBR_TO_RESTORE ( ) No change has been performed on your computer. See you soon! internet: connected Thanks for your time and attention. EDIT: additional Info Request =No boot loader is installed in the MBR of /dev/sda. But maybe this is how it is supposed to work? yea this is ok. boot stuff seems to be on a seperate partition, in my case sda1. I'm very new to this UEFI thing too. missing files like bootmgr i don't really have a clue :D but yea, maybe thats how it suppose to be? Instead and whats not shown in the log for some reason: There is additional microsoft bootfiles on sda1 under /efi/microsoft/ [much stuff] I remember also doing some kind of hack to make a UEFI windows 7 usb stick. http://jake.io/b/2011/installing-windows-7-with-uefi-boot-on-an-x220-from-usb/ In short: creating and placing bootx64.efi on the stick so it can be booted in UEFI mode. boot order i decide that in my BIOS. i read somwhere that the thinkpad x220 (essential part of the serial number: 4921 http://www.lenovo.com/shop/americas/content/user_guides/x220_x220i_x220tablet_x220itablet_ug_en.pdf) doesnt really have UEFI interface or something, still, these 2 options are listed with all the other usual devices you can give a boot priority to. Right now it looks like this: Boot Priority Order 1. ubuntu 2. Windows Boot Manager 3. USB FDD 4. USB HDD 5. ATA HDD0 HITACHI [random string]

  Read the article

• Visual Studio project using the Quality Center API remains in memory

  - by Traveling Tech Guy

  Hi, Currently developing a connector DLL to HP's Quality Center. I'm using their (insert expelative) COM API to connect to the server. An Interop wrapper gets created automatically by VStudio. My solution has 2 projects: the DLL and a tester application - essentially a form with buttons that call functions in the DLL. Everything works well - I can create defects, update them and delete them. When I close the main form, the application stops nicely. But when I call a function that returns a list of all available projects (to fill a combo box), if I close the main form, VStudio still shows the solution as running and I have to stop it. I've managed to pinpoint a single function in my code that when I call, the solution remains "hung" and if I don't, it closes well. It's a call to a property in the TDC object get_VisibleProjects that returns a List (not the .Net one, but a type in the COM library) - I just iterate over it and return a proper list (that I later use to fill the combo box): public List<string> GetAvailableProjects() { List<string> projects = new List<string>(); foreach (string project in this.tdc.get_VisibleProjects(qcDomain)) { projects.Add(project); } return projects; } My assumption is that something gets retained in memory. If I run the EXE outside of VStudio it closes - but who knows what gets left behind in memory? My question is - how do I get rid of whatever calling this property returns? Shouldn't the GC handle this? Do I need to delve into pointers? Things I've tried: getting the list into a variable and setting it to null at the end of the function Adding a destructor to the class and nulling the tdc object Stepping through the tester function application all the way out, whne the form closes and the Main function ends - it closes, but VStudio still shows I'm running. Thanks for your assistance!

  Read the article

• trying to center a css menu made on purecssmenu.com

  - by Party Mcfly

  i have a menu that i generated on purecssmenu.com and im having trouble trying to center it on my page here is the code... <!-- Start PureCSSMenu.com STYLE --> <style> #pcm{display:none;} ul.pureCssMenu ul{display:none} ul.pureCssMenu li:hover>ul{display:block} ul.pureCssMenu ul{position: absolute;left:-1px;top:98%;} ul.pureCssMenu ul ul{position: absolute;left:98%;top:-2px;} ul.pureCssMenu,ul.pureCssMenu ul { margin:0px; list-style:none; padding:0px 2px 2px 0px; background-color:#000000; background-repeat:repeat; border-color:#000000; border-width:1px; border-style:solid; } ul.pureCssMenu table {border-collapse:collapse}ul.pureCssMenu { display:block; zoom:1; float: left; } ul.pureCssMenu ul{ width:80.85000000000001px; } ul.pureCssMenu li{ display:block; margin:2px 0px 0px 2px; font-size:0px; } ul.pureCssMenu a:active, ul.pureCssMenu a:focus { outline-style:none; } ul.pureCssMenu a, ul.pureCssMenu li.dis a:hover, ul.pureCssMenu li.sep a:hover { display:block; vertical-align:middle; background-color:#000000; border-width:1px; border-color:#000000; border-style:solid; text-align:left; text-decoration:none; padding:2px 5px 2px 10px; _padding-left:0; font:11px Arial; color: #969696; text-decoration:none; cursor:default; } ul.pureCssMenu span{ overflow:hidden; } ul.pureCssMenu li { float:left; } ul.pureCssMenu ul li { float:none; } ul.pureCssMenu ul a { text-align:left; white-space:nowrap; } ul.pureCssMenu li.sep{ text-align:left; padding:0px; line-height:0; height:100%; } ul.pureCssMenu li.sep span{ float:none; padding-right:0; width:3px; height:100%; display:inline-block; background-color:#cccccc #111111 #111111 #cccccc; background-image:none;} ul.pureCssMenu ul li.sep span{ width:100%; height:3px; } ul.pureCssMenu li:hover{ position:relative; } ul.pureCssMenu li:hover>a{ background-color:#000000; border-color:#000000; border-style:solid; font:11px Arial; color: #ffa500; text-decoration:none; } ul.pureCssMenu li a:hover{ position:relative; background-color:#000000; border-color:#000000; border-style:solid; font:11px Arial; color: #ffa500; text-decoration:none; } ul.pureCssMenu li.dis a { color: #666 !important; } ul.pureCssMenu img {border: none;float:left;_float:none;margin-right:2px;width:16px; height:16px; } ul.pureCssMenu ul img {width:16px; height:16px; } ul.pureCssMenu img.over{display:none} ul.pureCssMenu li.dis a:hover img.over{display:none !important} ul.pureCssMenu li.dis a:hover img.def {display:inline !important} ul.pureCssMenu li:hover > a img.def {display:none} ul.pureCssMenu li:hover > a img.over {display:inline} ul.pureCssMenu a:hover img.over,ul.pureCssMenu a:hover ul img.def,ul.pureCssMenu a:hover a:hover img.over{display:inline} ul.pureCssMenu a:hover img.def,ul.pureCssMenu a:hover ul img.over,ul.pureCssMenu a:hover a:hover img.def{display:none} ul.pureCssMenu a:hover ul{display:block} ul.pureCssMenu span{ display:block; background-image:url(./images/arr_white.gif); background-position:right center; background-repeat: no-repeat; padding-right:12px;} ul.pureCssMenu li:hover>a>span{ background-image:url(./images/arrv_white.gif); } ul.pureCssMenu a:hover span{ _background-image:url(./images/arrv_white.gif)} ul.pureCssMenu ul span,ul.pureCssMenu a:hover table span{background-image:url(./images/arr_white.gif)} </style> <!-- End PureCSSMenu.com STYLE --> and here is the html, witch is probably not even needed in this posted but i figure i would include it.. i just want that menu centered inside my website. <!-- Start PureCSSMenu.com MENU --> <ul class="pureCssMenu pureCssMenum"> <li class="pureCssMenui"><a class="pureCssMenui" href="home.html" target="scare">home</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">about</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#"><span>haunts</span><![if gt IE 6]></a><![endif]><!--[if lte IE 6]><table><tr><td><![endif]--> <ul class="pureCssMenum"> <li class="pureCssMenui"><a class="pureCssMenui" href="#">2009</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">2010</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">2011</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">2012</a></li> </ul> <!--[if lte IE 6]></td></tr></table></a><![endif]--></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">studio</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#"><span>products</span><![if gt IE 6]></a><![endif]><!--[if lte IE 6]><table><tr><td><![endif]--> <ul class="pureCssMenum"> <li class="pureCssMenui"><a class="pureCssMenui" href="#">nightmares</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">hauntworks</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">atmosfears</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">frightwears</a></li> </ul> <!--[if lte IE 6]></td></tr></table></a><![endif]--></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#"><span>links</span><![if gt IE 6]></a><![endif]><!--[if lte IE 6]><table><tr><td><![endif]--> <ul class="pureCssMenum"> <li class="pureCssMenui"><a class="pureCssMenui" href="#">haunts</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">suppliers</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">resources</a></li> </ul> <!--[if lte IE 6]></td></tr></table></a><![endif]--></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">contact</a></li> </ul> <a id="pcm" href="http://www.purecssmenu.com/">CSS Drop Down Menu by PureCSSMenu.com</a> <!-- End PureCSSMenu.com MENU --> thanks in advance for your time.

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >