Search Results

Search found 2020 results on 81 pages for 'hdd'.

Page 12/81 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• mac: How to mount ejected external hdd again

  - by Maurice Kroon

  I've used my WD My Book 1TB for quite some time now. I always simply unplug it without officially 'ejecting' it. However, yesterday I did eject it (the partitions) before unplugging it. However, now, when i reconnect the hdd, it does not show the drives. It only shows the WD SmartWare partition (which is empty btw). The rest doesn't start. Does anyone know how to mount an unmounted disk? thx in advance!

  Read the article

• Cannot boot to HDD or Optical when Motherboard in AHCI mode

  - by Shevek

  I have an Abit AB9 QuadGT motherboard and am trying to swap over to AHCI mode. I have an existing Windows 7 installation which was installed under IDE mode. I have set the msahci registry setting to 0. When I try to boot in AHCI mode I get "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". I have tried booting with my Win 7 DVD in the optical drive. There is 1 SSD (System), 1 HDD (Data) and 2 optical drives connected via SATA If I switch back to IDE mode everything boots fine, either from the SSD or from a CD or DVD in the optical drive. Why can't I use AHCI mode?

  Read the article

• How can you make a Windows USB HDD Modify All for All Users

  - by David Allan Finch

  Hi, I use a USB HDD a lot between lots of different Windows Boxes. What I find after a while is that there get to be lots of different Permission on the files in some cases stopping me looking at files or removing them. They want Admin rights or even sometimes you need to put the disk back into the original machine with the original user. This is a right pain. Is there away of making the disk have Modify All for All Users and making this the default for all files on the disk. Thanks

  Read the article

• Cannot see main user profile directory on old vista hdd on win7

  - by chaoskreator

  I have an old laptop HDD that ran Vista that I need to get some pictures and movies off of. I've attached it via SATA cable to my new Win 7 (64 bit) machine and it mounts fine, except I can't see the main user profile in the D:\Users directory. I've changed ownership and permissions for the D: drive to my C:\ Username but still no luck. I read something about it being caused by the UAC being active on the Vista machine. Is this true? Is there a way to disable this and gain access to the main profile without putting it back into the old laptop (it's fried and won't boot)?

  Read the article

• off-the-shelf HDD in Dell Optiplex 755 - Invalid Replacement - Press F1 when rebooting

  - by Eric Liprandi

  Hi, I recently put an SSD into my work Optiplex 755. Since then, every time the system boots or reboots, I get prompted to hit F1 to continue with a message like HDD replacement is not valid. The system works just fine. What I am gathering from Dell's website is that I left the original drive internally as a data drive. And apparently the Optiplex does not support 2 drives in the configuration we purchased originally and complains. Any suggestions on how to get rid of this message? some suggested the MEBx or whatever from Intel and to turn it off, but I did not succeed earlier. It's not a big deal 80% of the time, but I regularly work from home and occasionally need to fire a reboot and well, you don't get the BIOS screen remotely :) Regards, Eric.

  Read the article

• off-the-shelf HDD in Dell Optiplex 755 - Invalid Replacement - Press F1 when rebooting

  - by Eric Liprandi

  I recently put an SSD into my work Optiplex 755. Since then, every time the system boots or reboots, I get prompted to hit F1 to continue with a message like HDD replacement is not valid. The system works just fine. What I am gathering from Dell's website is that I left the original drive internally as a data drive. And apparently the Optiplex does not support 2 drives in the configuration we purchased originally and complains. Any suggestions on how to get rid of this message? some suggested the MEBx or whatever from Intel and to turn it off, but I did not succeed earlier. It's not a big deal 80% of the time, but I regularly work from home and occasionally need to fire a reboot and well, you don't get the BIOS screen remotely :) Regards, Eric.

  Read the article

• Lost HDD partition to clean command, testdisk unresponsive

  - by Sujay Anjankar

  I accidentally cleaned my external HDD by the clean command in Diskpart and got a full sized heart attack after that. I did some research and I have tried a number of tools already. To name a few: Testdisk Recuva Partition Find and mount Eassos Recovery I have even tried some other dumb sounding tools, but none of them could find the lost partition. They just show "no partition found". Testdisk shows Partition sector doesn't have the endmark 0xAA55. The file recovery softwares list the files, but none of them seem to be able to restore the lost partition. I need to recover the disk as it was. Any help would be much appreciated!

  Read the article

• hdd fail, allows format, allows copy

  - by Bogdan

  Hello I have a problem with a Fujitsu laptop. Some kid played with it and now the hdd is a wreck. I can't install Windows XP, Windows 7 or Linux. I checked with hiren's boot for bad sector did a chdisk on it says I don't have any bad sectors, on smart says is active but status error. I tried format and it worked, I tried copying files using a live CD and it worked, but when I try to install the OS it says it can't format, or it can't copy files.

  Read the article

• 3 TB HDD won't reactivate

  - by isif

  After doing a clean install of Windows 8 my Seagate 3 TB HDD won't reactivate in Disk Management. The two volumes are there but I can't use them for some reason. The drive was previously used with a GPT partition table, I can see the two spanned volumes but can't reactivate either. I backed up all my files from Windows 7 onto that drive and desperately need them back. What can and should I do to get the drive back up and running? When I go to Disk → Properties → Volumes, it claims the drive has a MBR partition style, so converting to GPT somehow without data loss should work. gDisk claims to be able to do that but when I point it to the drive, it claims that it has a GPT partition and a protected MBR partition. Any suggestions on what to do?

  Read the article

• Prevent Windows 7 prompt format USB HDD

  - by mike

  I am running Windows 7. I have a USB HDD 100% formatted with a Trucypt partition. When I insert the drive into my system, Windows asks if I would like to format the drive, each time I insert the drive. So how do I turn this prompt off? If so, I would prefer it be applied globally (e.g. no more prompts for any other drives). Since its an invisible partition unless mounted with Trucypt, Windows is always going to think nothing is there and continue to prompt me. I don't want to hit enter on the keyboard a few times by mistake doing something else and have it to go through the process. I'll lose everything. It is all backed up BTW. Will just be inconvienient.

  Read the article

• Booting Linux from External HDD, with persistence

  - by Moriarty

  I am trying to install Linux, specifically Lubuntu or BackTrack 5 on an external HDD (Seagate FreeAgent GoFlex) but I have had no luck using YUMI, or Untebootin to get it working. I want the hard drive to be able to save the data within Linux (As in, If I install a program, it will stay there). I also tried doing this with a flash drive, which does boot, but it does not save data (I tried following Pendrive's tutorial on creating a casper-rw file and adding "persistent" to various files, but I cannot get it to save files. Basically, I just want a form of linux on a portable device that will save files and settings between boots Note: I do not have a CD to install from. Any help would be greatly appreciated, Thanks!

  Read the article

• Better Performance with Laptop i5+SSD or i7+HDD [closed]

  - by Cas Sakal

  Possible Duplicates: i5 vs. i7 processor dev laptop Developer Notebook i5 or i7 I could not decide on which configuration below gives better performance for developers on a notebook(running VS.NET, SQL Server, no gaming); (A) i5 540M + SSD (Intel) or (B) i7 720M + 7200 RPM HDD (Western Digital) Since these two configurations(A, B) costs nearly same $ for me, I would like to buy the fastest one for my job environment. Please do not comment just buy this or that, if you can give an inference about your choice I would be appreciated. Thank you, cas

  Read the article

• HDD situation - what would be best - data and backup

  - by Sam Johnson

  I just installed W8 on an Intel 330 180 GB SSD. I have 3 1TB HDDs. 1 HDD will be external for backup. 2 HDDs are then available for my PC. I do not need 2 TB of storage, so I thought I'd set these up to be exact clones of one another, so that if one dies I have a backup in the computer to go along with my external. Is this a good set up? How best would this be accomplished? I've heard people suggest RAID but I've never done RAID, have no idea what it is, and have no idea how to set it up in my BIOS. Thanks in advance

  Read the article

• Encryption of external HDD -- accessible from windows without installation

  - by Rainer

  I would like to use encryption on my external HDD but I would like to be able to access the encrypted data from Windows as well. As suggested in other questions, TrueCrypt is one option here, or I am using momentarily encfs, which is not available for Windows. But my question goes further: I would like to be able to access the encrypted partition from Windows without installation as I will be using it from different Windows machines for which I have no administrator access. My main OS is Linux and I have full root access to that computer. Is there a full disk or file based encryption which I can use cross platform and which does not require installation under Windows? ADDITION: It seems that TrueCrypt provides a portable mode which fulfills my requirements partly: http://www.truecrypt.org/docs/?s=truecrypt-portable, but still the TrueCrypt driver needs to be installed by an administrator... pitty Thanks

  Read the article

• Inexpensive degaussers or HDD shredders?

  - by Nicholas Knight

  I do a lot of work for a small cash-strapped business that has a lot of active hard drives, most are consumer-grade SATA of about five years of age, and predictably they are dying at an increasing rate, and a lot of the time they can't even be detected, let alone complete a zero-out cycle. Right now those drives are just being stored, but that can't continue forever. We've got a couple bad LTO tapes it'd be nice to deal with, too. There are very real security and legal issues that make dropping them off with someone who claims they'll be properly destroyed a gamble. I've looked around at degaussers and HDD shredders, and the ones that don't look like they come from some guy in his basement all seem to be $3000+, which is hard to swallow right now. Is there anything out there in the $500-1500 range that you would recommend? (Speed isn't a big issue, if it takes several minutes or even hours per drive, that's completely OK, we've only got 10 or so thus far.)

  Read the article

• IDE Motherboard to Boot from a SATA 1T Hdd

  - by JavaMan

  I want to use my SATA HDD in my very old ASUS A7V8X-X motherboard (made in 2003). I intended to buy a cheap adapter for this. Say something similar to this one: http://www.cooldrives.com/satoidecofor.html But would there be any issue if I want to boot from this SATA drive? My impression is that these kind of adapters convert SATA signal and commands to PATA directly and such a low level conversion should be transparent to the motherboard and BIOS - in case the BIOS doesn't support SATA. And, for my motherboard, it sure doesn't. Does anyone ever used such a kind of adapter to support a boot drive? Any success sorry?

  Read the article

• Asus WL-520GC + external HDD via Ethernet

  - by Azat

  Has anyone experience of using such combination? Exactly with the same model (or from same model line). How does it works? How hard is to set up all that? What difficulties? I use this router a couple of years, but now i haven't such external drive at my disposal. I want to buy something like Verbatim 47591 or Western Digital WDH1NC10000. (By the way, my router has no USB ports, therefore only Ethernet-ports for external HDD are supported.) Thanks you a lot in advance!

  Read the article

• How do I add permissions via command line for "everyone" on external HDD

  - by acidzombie24

  I have an external HDD and I kind of messed up the file permissions but when fixing it I thought it is ok bc with my username I can access the files perfectly fine. Now that I use this with two PC (actually ATM I don't have access to my other PC) I can't access these files. The problem is this directory has hundreds of folders with no permission for "everyone". I would like to give it the default permissions including have all access for the user "everyone". How do I do that via command line for these hundreds of folders?

  Read the article

• Boot camp install from a HDD image

  - by Dombou

  How would one go about imaging an old work computer (old IBM aptiva from 2001ish) with Windows XP and lots of stuff (VPN client with settings etc) to a new iMac, while preserving Mac OSX? I can't simply install XP on the iMac and then reinstall/copy across stuff; it NEEDS to be an image. Can you even image smaller HDD's and then place them on large ones, or do they have to be the same size? Recommendations on how I go about this? Edit: It MUST be boot camp. I don't want to virtualize it from within OsX

  Read the article

• ESXI with non standard hardware HDD issues

  - by Hurricanepkt

  I have 3 very underutilized servers that I am condensing to one of those shuttle PC's with VMWare ESXi The HDD seems to be the bottle neck right now (the light is almost always pure solid) right now I have a single 1TB Seagate 7200.11 connected by SATA. VMWare ESXi cannot detect it when running in AHCI mode, but does when running in IDE mode. I have read that IDE mode can give a 5% performance hit which might give me enough breathing room. However, I am open to setting up an external eSATA or some sort of raid to give me more than just the 5%. I am just weary of sinking some money into a bit of hardware without knowledge of whether it will work. Does anyone know of resources or procedures of how to get this working.

  Read the article

• I recently converted my ex HDD from FAT32 to NTFS. now my pc doesn't find or pick up my NTFS HDD

  - by Jason Haniball

  I recently converted my external hard drive from FAT32 to NTFS using the Command Prompt. Everything was working fine, I copied a 7GB file to it and everything worked. The next day I switched on my PC, I couldn't and still can't find my external 1.5TB hard drive by my computer. I have about 500 to 800 GB of data on it that I really don't want to lose. Its a Iomega Seagate Freeagent HDD. Has no switch, it switched on automatically, don't know if that helps.

  Read the article

• Laptop HDD not mounting.

  - by D3X

  I have a laptop with broken (shorted out) motherboard and a 640 GB HDD. I want to recover my data from the hard disk. Every time I connect the hard disk using an external casing, it is being detected in the disk management service but not visible in my computer, nor accessible through command prompt. The Hard Disk is functioning as I can feel the hard disk rotor working properly when connected using the casing. Also the LED on the hard disk is blinking, the data is there but i am unable to access the data. Someone please suggest me ways of using the hard-disk as a slave disk using casing.

  Read the article

• Mounted HDD not having enough permissions from Apache/PHP

  - by Dan

  Piwigo gallery, on apache and php. The root system is a RAID 128GB. /var/www/html is on the root file system. Mounted the 320GB hdd to /var/www/html/320 using defaults, it's an ext4 fs. Put a symlink to it in /var/www/html/galleries which is read by the gallery script so I can upload images to there, then click sync. It gives me the error: [./galleries/] PWG-ERROR-NO-FS (File/directory read error) PWG-ERROR-NO-FS: The file or directory cannot be accessed (either it does not exist or the access is denied) chmod 777 set on /dev/sdb1, /var/www/html, and /var/www/html/320 as well as the symlink galleries too. All recursive. chown apache:apache to everything too. PHP just can't read/write to it. I tried with and without the symlink, I've tried everything I can think of. Nothing. Any ideas how I can give apache/php permission to read/write to this drive? With 777 permissions all around it should already be able to.

  Read the article

• Finding a shared HDD attached to the network from my F-13 machine

  - by Ramy

  Sorry for the slew of n00bie questions, but here is one more. I recently partitioned my 1.5TB harddrive according to this question I then bought this to attach the harddrive to my network. The problem is, how do I navigate to the hard drive to move files over the network to the HDD. should this be moved to serverfault? update: the disk isn't even showing up when i call "fdisk -l" (as root). How can I mount it if I can't even find it? [root@Moonface ~]# /sbin/fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00018598 Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 19458 155777024 8e Linux LVM Disk /dev/dm-0: 53.7 GB, 53687091200 bytes 255 heads, 63 sectors/track, 6527 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/dm-1: 4764 MB, 4764729344 bytes 255 heads, 63 sectors/track, 579 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-1 doesn't contain a valid partition table Disk /dev/dm-2: 101.0 GB, 101032394752 bytes 255 heads, 63 sectors/track, 12283 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-2 doesn't contain a valid partition table

  Read the article

• Which HDD brand do you ..trust

  - by Shiki

  Okay it says its 'subjective' but I believe it's not. Basically I want to ask the community about your preference. Not really 'preference' but actual experience. Like if you never had a problem with Western Digital, then write that in an answer, or if there is one with WD, just vote it up. And so on. (Heard so many stories, experiences. I only had Samsung, Maxtor, WD, Seagate HDDs. Samsung died with bad blocks, had anomalies. Maxtor died so fast I couldn't even try it really and it's really hot, loud. Seagate is just as loud as a jet plane, and moderately hot. My WD (green) is quiet, really cool and somewhat fast. That's all I have about experiences. So I would say Western Digital in an answer (OR Hitachi. Never had one yet, but every expert I know says I should get one since they even had problems with WD but Hitachi seems to be ok. (My laptop comes with Hitachi hdd but I don't think its really relevant.)) Basically I mean desktop 7200RPM HDDs here. Well.. notebook HDDs are ok also, but no raptor/scsi/server ones. Hope you get what I meant and it won't get closed.

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >