Search Results

Search found 1913 results on 77 pages for 'james marthenal'.

Page 12/77 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • C#: A "Dumbed-Down" C++?

    - by James Michael Hare
    I was spending a lovely day this last weekend watching my sons play outside in one of the better weekends we've had here in Saint Louis for quite some time, and whilst watching them and making sure no limbs were broken or eyes poked out with sticks and other various potential injuries, I was perusing (in the correct sense of the word) this month's MSDN magazine to get a sense of the latest VS2010 features in both IDE and in languages. When I got to the back pages, I saw a wonderful article by David S. Platt entitled, "In Praise of Dumbing Down"  (msdn.microsoft.com/en-us/magazine/ee336129.aspx).  The title captivated me and I read it and found myself agreeing with it completely especially as it related to my first post on divorcing C++ as my favorite language. Unfortunately, as Mr. Platt mentions, the term dumbing-down has negative connotations, but is really and truly a good thing.  You are, in essence, taking something that is extremely complex and reducing it to something that is much easier to use and far less error prone.  Adding safeties to power tools and anti-kick mechanisms to chainsaws are in some sense "dumbing them down" to the common user -- but that also makes them safer and more accessible for the common user.  This was exactly my point with C++ and C#.  I did not mean to infer that C++ was not a useful or good language, but that in a very high percentage of cases, is too complex and error prone for the job at hand. Choosing the correct programming language for a job is a lot like choosing any other tool for a task.  For example: if I want to dig a French drain in my lawn, I can attempt to use a huge tractor-like backhoe and the job would be done far quicker than if I would dig it by hand.  I can't deny that the backhoe has the raw power and speed to perform.  But you also cannot deny that my chances of injury or chances of severing utility lines or other resources climb at an exponential rate inverse to the amount of training I may have on that machinery. Is C++ a powerful tool?  Oh yes, and it's great for those tasks where speed and performance are paramount.  But for most of us, it's the wrong tool.  And keep in mind, I say this even though I have 17 years of experience in using it and feel myself highly adept in utilizing its features both in the standard libraries, the STL, and in supplemental libraries such as BOOST.  Which, although greatly help with adding powerful features quickly, do very little to curb the relative dangers of the language. So, you may say, the fault is in the developer, that if the developer had some higher skills or if we only hired C++ experts this would not be an issue.  Now, I will concede there is some truth to this.  Obviously, the higher skilled C++ developers you hire the better the chance they will produce highly performant and error-free code.  However, what good is that to the average developer who cannot afford a full stable of C++ experts? That's my point with C#:  It's like a kinder, gentler C++.  It gives you nearly the same speed, and in many ways even more power than C++, and it gives you a much softer cushion for novices to fall against if they code less-than-optimally.  A bug is a bug, of course, in any language, but C# does a good job of hiding and taking on the task of handling almost all of the resource issues that make C++ so tricky.  For my money, C# is much more maintainable, more feature-rich, second only slightly in performance, faster to market, and -- last but not least -- safer and easier to use.  That's why, where I work, I much prefer to see the developers moving to C#.  The quantity of bugs is much lower, and we don't need to hire "experts" to achieve the same results since the language itself handles those resource pitfalls so prevalent in poorly written C++ code.  C++ will still have its place in the world, and I'm sure I'll still use it now and again where it is truly the correct tool for the job, but for nearly every other project C# is a wonderfully "dumbed-down" version of C++ -- in the very best sense -- and to me, that's the smart choice.

    Read the article

  • C#: Handling Notifications: inheritance, events, or delegates?

    - by James Michael Hare
    Often times as developers we have to design a class where we get notification when certain things happen. In older object-oriented code this would often be implemented by overriding methods -- with events, delegates, and interfaces, however, we have far more elegant options. So, when should you use each of these methods and what are their strengths and weaknesses? Now, for the purposes of this article when I say notification, I'm just talking about ways for a class to let a user know that something has occurred. This can be through any programmatic means such as inheritance, events, delegates, etc. So let's build some context. I'm sitting here thinking about a provider neutral messaging layer for the place I work, and I got to the point where I needed to design the message subscriber which will receive messages from the message bus. Basically, what we want is to be able to create a message listener and have it be called whenever a new message arrives. Now, back before the flood we would have done this via inheritance and an abstract class: 1:  2: // using inheritance - omitting argument null checks and halt logic 3: public abstract class MessageListener 4: { 5: private ISubscriber _subscriber; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber) 11: { 12: _subscriber = subscriber; 13: _messageThread = new Thread(MessageLoop); 14: _messageThread.Start(); 15: } 16:  17: // user will override this to process their messages 18: protected abstract void OnMessageReceived(Message msg); 19:  20: // handle the looping in the thread 21: private void MessageLoop() 22: { 23: while(!_isHalted) 24: { 25: // as long as processing, wait 1 second for message 26: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 27: if(msg != null) 28: { 29: OnMessageReceived(msg); 30: } 31: } 32: } 33: ... 34: } It seems so odd to write this kind of code now. Does it feel odd to you? Maybe it's just because I've gotten so used to delegation that I really don't like the feel of this. To me it is akin to saying that if I want to drive my car I need to derive a new instance of it just to put myself in the driver's seat. And yet, unquestionably, five years ago I would have probably written the code as you see above. To me, inheritance is a flawed approach for notifications due to several reasons: Inheritance is one of the HIGHEST forms of coupling. You can't seal the listener class because it depends on sub-classing to work. Because C# does not allow multiple-inheritance, I've spent my one inheritance implementing this class. Every time you need to listen to a bus, you have to derive a class which leads to lots of trivial sub-classes. The act of consuming a message should be a separate responsibility than the act of listening for a message (SRP). Inheritance is such a strong statement (this IS-A that) that it should only be used in building type hierarchies and not for overriding use-specific behaviors and notifications. Chances are, if a class needs to be inherited to be used, it most likely is not designed as well as it could be in today's modern programming languages. So lets look at the other tools available to us for getting notified instead. Here's a few other choices to consider. Have the listener expose a MessageReceived event. Have the listener accept a new IMessageHandler interface instance. Have the listener accept an Action<Message> delegate. Really, all of these are different forms of delegation. Now, .NET events are a bit heavier than the other types of delegates in terms of run-time execution, but they are a great way to allow others using your class to subscribe to your events: 1: // using event - ommiting argument null checks and halt logic 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private bool _isHalted = false; 6: private Thread _messageThread; 7:  8: // assign the subscriber and start the messaging loop 9: public MessageListener(ISubscriber subscriber) 10: { 11: _subscriber = subscriber; 12: _messageThread = new Thread(MessageLoop); 13: _messageThread.Start(); 14: } 15:  16: // user will override this to process their messages 17: public event Action<Message> MessageReceived; 18:  19: // handle the looping in the thread 20: private void MessageLoop() 21: { 22: while(!_isHalted) 23: { 24: // as long as processing, wait 1 second for message 25: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 26: if(msg != null && MessageReceived != null) 27: { 28: MessageReceived(msg); 29: } 30: } 31: } 32: } Note, now we can seal the class to avoid changes and the user just needs to provide a message handling method: 1: theListener.MessageReceived += CustomReceiveMethod; However, personally I don't think events hold up as well in this case because events are largely optional. To me, what is the point of a listener if you create one with no event listeners? So in my mind, use events when handling the notification is optional. So how about the delegation via interface? I personally like this method quite a bit. Basically what it does is similar to inheritance method mentioned first, but better because it makes it easy to split the part of the class that doesn't change (the base listener behavior) from the part that does change (the user-specified action after receiving a message). So assuming we had an interface like: 1: public interface IMessageHandler 2: { 3: void OnMessageReceived(Message receivedMessage); 4: } Our listener would look like this: 1: // using delegation via interface - omitting argument null checks and halt logic 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private IMessageHandler _handler; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber, IMessageHandler handler) 11: { 12: _subscriber = subscriber; 13: _handler = handler; 14: _messageThread = new Thread(MessageLoop); 15: _messageThread.Start(); 16: } 17:  18: // handle the looping in the thread 19: private void MessageLoop() 20: { 21: while(!_isHalted) 22: { 23: // as long as processing, wait 1 second for message 24: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 25: if(msg != null) 26: { 27: _handler.OnMessageReceived(msg); 28: } 29: } 30: } 31: } And they would call it by creating a class that implements IMessageHandler and pass that instance into the constructor of the listener. I like that this alleviates the issues of inheritance and essentially forces you to provide a handler (as opposed to events) on construction. Well, this is good, but personally I think we could go one step further. While I like this better than events or inheritance, it still forces you to implement a specific method name. What if that name collides? Furthermore if you have lots of these you end up either with large classes inheriting multiple interfaces to implement one method, or lots of small classes. Also, if you had one class that wanted to manage messages from two different subscribers differently, it wouldn't be able to because the interface can't be overloaded. This brings me to using delegates directly. In general, every time I think about creating an interface for something, and if that interface contains only one method, I start thinking a delegate is a better approach. Now, that said delegates don't accomplish everything an interface can. Obviously having the interface allows you to refer to the classes that implement the interface which can be very handy. In this case, though, really all you want is a method to handle the messages. So let's look at a method delegate: 1: // using delegation via delegate - omitting argument null checks and halt logic 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private Action<Message> _handler; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber, Action<Message> handler) 11: { 12: _subscriber = subscriber; 13: _handler = handler; 14: _messageThread = new Thread(MessageLoop); 15: _messageThread.Start(); 16: } 17:  18: // handle the looping in the thread 19: private void MessageLoop() 20: { 21: while(!_isHalted) 22: { 23: // as long as processing, wait 1 second for message 24: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 25: if(msg != null) 26: { 27: _handler(msg); 28: } 29: } 30: } 31: } Here the MessageListener now takes an Action<Message>.  For those of you unfamiliar with the pre-defined delegate types in .NET, that is a method with the signature: void SomeMethodName(Message). The great thing about delegates is it gives you a lot of power. You could create an anonymous delegate, a lambda, or specify any other method as long as it satisfies the Action<Message> signature. This way, you don't need to define an arbitrary helper class or name the method a specific thing. Incidentally, we could combine both the interface and delegate approach to allow maximum flexibility. Doing this, the user could either pass in a delegate, or specify a delegate interface: 1: // using delegation - give users choice of interface or delegate 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private Action<Message> _handler; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber, Action<Message> handler) 11: { 12: _subscriber = subscriber; 13: _handler = handler; 14: _messageThread = new Thread(MessageLoop); 15: _messageThread.Start(); 16: } 17:  18: // passes the interface method as a delegate using method group 19: public MessageListener(ISubscriber subscriber, IMessageHandler handler) 20: : this(subscriber, handler.OnMessageReceived) 21: { 22: } 23:  24: // handle the looping in the thread 25: private void MessageLoop() 26: { 27: while(!_isHalted) 28: { 29: // as long as processing, wait 1 second for message 30: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 31: if(msg != null) 32: { 33: _handler(msg); 34: } 35: } 36: } 37: } } This is the method I tend to prefer because it allows the user of the class to choose which method works best for them. You may be curious about the actual performance of these different methods. 1: Enter iterations: 2: 1000000 3:  4: Inheritance took 4 ms. 5: Events took 7 ms. 6: Interface delegation took 4 ms. 7: Lambda delegate took 5 ms. Before you get too caught up in the numbers, however, keep in mind that this is performance over over 1,000,000 iterations. Since they are all < 10 ms which boils down to fractions of a micro-second per iteration so really any of them are a fine choice performance wise. As such, I think the choice of what to do really boils down to what you're trying to do. Here's my guidelines: Inheritance should be used only when defining a collection of related types with implementation specific behaviors, it should not be used as a hook for users to add their own functionality. Events should be used when subscription is optional or multi-cast is desired. Interface delegation should be used when you wish to refer to implementing classes by the interface type or if the type requires several methods to be implemented. Delegate method delegation should be used when you only need to provide one method and do not need to refer to implementers by the interface name.

    Read the article

  • Handling Errors In PHP When Using MVC

    - by James Jeffery
    I've been using Codeigniter a lot recently, but one thing that gets on my nerves is handling errors and displaying them to the user. I've never been good at handling errors without it getting messy. My main concern is when returning errors to the user. Is it good practice to use exceptions and throw/catch exceptions rather than returning 0 or 1 from functions and then using if/else to handle the errors. Thus, making it easier to inform the user about the issue. I tend to go away from exceptions. My Java tutor at university some years ago told me "exceptions shouldn't be used in production code it's more for debugging". I get the feeling he was lying. But, an example, I have code that adds a user to a database. During the process more than 1 thing could go wrong, such as a database issue, a duplicate entry, a server issue, etc. When an issue happens during registration the user needs to know about it. What's the best way to handle errors in PHP, keeping in mind that I'm using an MVC framework.

    Read the article

  • How to update a game off a database

    - by James Clifton
    I am currently writing a sports strategy management game (cricket) in PHP, with a MYSQL database, and I have come across one stumbling block - how do I update games where neither player is online? Cricket is a game played between two players, and when they (or one of them) is online then everything is fine; but what if neither player is online? This occurs when championship games are played, and these games need to happen at certain times for game reasons. At the moment I have a private web page that updates every 5 seconds, and each time it loads all games are updated; but then I have the problem that when my private web page stops (for example my computer crashes or my web browser plays up) the game stops updating! Any suggestions?

    Read the article

  • Nginx or Apache for a VPS?

    - by James
    I consider myself to be an inexperienced user/administrator when it comes to running my VPS. I can get by with a few CLI commands, I can set up Webmin and I can set up Yum repos, but beyond the very basic stuff, I'm out of my depth. So far, I'm running Apache. I don't know it particularly well, but I can get by with editing httpd.conf if I'm told what to edit. I've heard good things about Nginx and that it's not as resource-hungry as Apache. I'd like to give it a go, but I can't find any information about its suitability for administrators like me, with little experience of sysadmin or web server config. Webmin now has support for Nginx, so getting it installed and running probably won't be too much of a problem. What I'm wondering is, from a site administrator perspective, is running Nginx as transparent as running Apache? IE, at the moment, I can just throw up Wordpress and Drupal sites without having much to worry about or having to make any config changes to Apache. Would Nginx be as transparent?

    Read the article

  • C#/.NET Little Wonders &ndash; Cross Calling Constructors

    - by James Michael Hare
    Just a small post today, it’s the final iteration before our release and things are crazy here!  This is another little tidbit that I love using, and it should be fairly common knowledge, yet I’ve noticed many times that less experienced developers tend to have redundant constructor code when they overload their constructors. The Problem – repetitive code is less maintainable Let’s say you were designing a messaging system, and so you want to create a class to represent the properties for a Receiver, so perhaps you design a ReceiverProperties class to represent this collection of properties. Perhaps, you decide to make ReceiverProperties immutable, and so you have several constructors that you can use for alternative construction: 1: // Constructs a set of receiver properties. 2: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable, bool isBuffered) 3: { 4: ReceiverType = receiverType; 5: Source = source; 6: IsDurable = isDurable; 7: IsBuffered = isBuffered; 8: } 9: 10: // Constructs a set of receiver properties with buffering on by default. 11: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable) 12: { 13: ReceiverType = receiverType; 14: Source = source; 15: IsDurable = isDurable; 16: IsBuffered = true; 17: } 18:  19: // Constructs a set of receiver properties with buffering on and durability off. 20: public ReceiverProperties(ReceiverType receiverType, string source) 21: { 22: ReceiverType = receiverType; 23: Source = source; 24: IsDurable = false; 25: IsBuffered = true; 26: } Note: keep in mind this is just a simple example for illustration, and in same cases default parameters can also help clean this up, but they have issues of their own. While strictly speaking, there is nothing wrong with this code, logically, it suffers from maintainability flaws.  Consider what happens if you add a new property to the class?  You have to remember to guarantee that it is set appropriately in every constructor call. This can cause subtle bugs and becomes even uglier when the constructors do more complex logic, error handling, or there are numerous potential overloads (especially if you can’t easily see them all on one screen’s height). The Solution – cross-calling constructors I’d wager nearly everyone knows how to call your base class’s constructor, but you can also cross-call to one of the constructors in the same class by using the this keyword in the same way you use base to call a base constructor. 1: // Constructs a set of receiver properties. 2: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable, bool isBuffered) 3: { 4: ReceiverType = receiverType; 5: Source = source; 6: IsDurable = isDurable; 7: IsBuffered = isBuffered; 8: } 9: 10: // Constructs a set of receiver properties with buffering on by default. 11: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable) 12: : this(receiverType, source, isDurable, true) 13: { 14: } 15:  16: // Constructs a set of receiver properties with buffering on and durability off. 17: public ReceiverProperties(ReceiverType receiverType, string source) 18: : this(receiverType, source, false, true) 19: { 20: } Notice, there is much less code.  In addition, the code you have has no repetitive logic.  You can define the main constructor that takes all arguments, and the remaining constructors with defaults simply cross-call the main constructor, passing in the defaults. Yes, in some cases default parameters can ease some of this for you, but default parameters only work for compile-time constants (null, string and number literals).  For example, if you were creating a TradingDataAdapter that relied on an implementation of ITradingDao which is the data access object to retreive records from the database, you might want two constructors: one that takes an ITradingDao reference, and a default constructor which constructs a specific ITradingDao for ease of use: 1: public TradingDataAdapter(ITradingDao dao) 2: { 3: _tradingDao = dao; 4:  5: // other constructor logic 6: } 7:  8: public TradingDataAdapter() 9: { 10: _tradingDao = new SqlTradingDao(); 11:  12: // same constructor logic as above 13: }   As you can see, this isn’t something we can solve with a default parameter, but we could with cross-calling constructors: 1: public TradingDataAdapter(ITradingDao dao) 2: { 3: _tradingDao = dao; 4:  5: // other constructor logic 6: } 7:  8: public TradingDataAdapter() 9: : this(new SqlTradingDao()) 10: { 11: }   So in cases like this where you have constructors with non compiler-time constant defaults, default parameters can’t help you and cross-calling constructors is one of your best options. Summary When you have just one constructor doing the job of initializing the class, you can consolidate all your logic and error-handling in one place, thus ensuring that your behavior will be consistent across the constructor calls. This makes the code more maintainable and even easier to read.  There will be some cases where cross-calling constructors may be sub-optimal or not possible (if, for example, the overloaded constructors take completely different types and are not just “defaulting” behaviors). You can also use default parameters, of course, but default parameter behavior in a class hierarchy can be problematic (default values are not inherited and in fact can differ) so sometimes multiple constructors are actually preferable. Regardless of why you may need to have multiple constructors, consider cross-calling where you can to reduce redundant logic and clean up the code.   Technorati Tags: C#,.NET,Little Wonders

    Read the article

  • Can anyone recommend online .Net training courses?

    - by james
    I am looking for peoples experiences with paid for online .Net training courses. In your experience, are these an able replacement for in-person training? Are they better than the many free ones provided on MSDN and the like? Are there any specific paid for ones you'd recommend? I usually prefer general book/web research myself, I have one specific provider in mind that looks really good, but I'll omit this for fear of advertising :)

    Read the article

  • Any valid reason to Nest Master Pages in ASP.Net rather than Inherit?

    - by James P. Wright
    Currently in a debate at work and I cannot fathom why someone would intentionally avoid Inheritance with Master Pages. For reference here is the project setup: BaseProject MainMasterPage SomeEvent SiteProject SiteMasterPage nested MainMasterPage OtherSiteProject MainMasterPage (from BaseProject) The debate came up because some code in BaseProject needs to know about "SomeEvent". With the setup above, the code in BaseProject needs to call this.Master.Master. That same code in BaseProject also applies to OtherSiteProject which is just accessed as this.Master. SiteMasterPage has no code differences, only HTML differences. If SiteMasterPage Inherits MainMasterPage rather than Nests it, then all code is valid as this.Master. Can anyone think of a reason why to use a Nested Master Page here instead of an Inherited one?

    Read the article

  • WebLogic not reading boot.properties 11.1.1.x

    - by James Taylor
    In WebLogic 11.1.1.1 the boot.properties file was stored in the $MW_HOME/user_projects/domains/[domain] directory. It would be read at startup and there would be no requirement to enter username and password. In later releases the location has changed to $MW_HOME/user_projects/domains/[domain]/servers/[managed_server]/security In most instances you will need to create the security directory If you want to specify a custom directory add the following to the startup scripts for the server. -Dweblogic.system.BootIdentityFile=[loc]/boot.properties create a boot.properties file using the following entry username=<adminuser> password=<password>

    Read the article

  • WebLogic Server–Use the Execution Context ID in Applications–Lessons From Hansel and Gretel

    - by james.bayer
    I learned a neat trick this week.  Don’t let your breadcrumbs go to waste like Hansel and Gretel did!  Keep track of the code path, logs and errors for each request as they flow through the system.  Earlier this week an OTN forum post in the WLS – General category by Oracle Ace John Stegeman asked a question how to retrieve the Execution Context ID so that it could be used on an error page that a user could provide to a help desk or use to check with application administrators so they could look up what went wrong.  What is the Execution Context ID (ECID)?  Fusion Middleware injects an ECID as a request enters the system and it says with the request as it flows from Oracle HTTP Server to Oracle Web Cache to multiple WebLogic Servers to the Oracle Database. It’s a way to uniquely identify a request across tiers.  According to the documentation it’s: The value of the ECID is a unique identifier that can be used to correlate individual events as being part of the same request execution flow. For example, events that are identified as being related to a particular request typically have the same ECID value.  The format of the ECID string itself is determined by an internal mechanism that is subject to change; therefore, you should not have or place any dependencies on that format. The novel idea that I see John had was to extend this concept beyond the diagnostic information that is captured by Fusion Middleware.  Why not also use this identifier in your logs and errors so you can correlate even more information together!  Your logging might already identify the user, so why not identify the request so you filter down even more.  All you need to do inside of WebLogic Server to get ahold of this information is invoke DiagnosticConextHelper: weblogic.diagnostics.context.DiagnosticContextHelper.getContextId() This class has other helpful methods to see other values tracked by the diagnostics framework too.  This way I can see even more detail and get information across tiers. In performance profiling, this can be very handy to track down where time is being spent in code.  I’ve blogged and made videos about this before.  JRockit Flight Recorder can use the WLDF Diagnostic Volume in WLS 10.3.3+ to automatically capture and correlate lots of helpful information for each request without installing any special agents and with the out-of-the-box JRockit and WLS settings!  You can see here how information is displayed in JRockit Flight Recorder about a single request as it calls a Servlet, which calls an EJB, which gets a DB connection, which starts a transaction, etc.  You can get timings around everything and even see the SQL that is used. http://download.oracle.com/docs/cd/E21764_01/web.1111/e13714/using_flightrecorder.htm#WLDFC480 Recent versions of the WLS console also are able to visualize this data too, so it works with other JVMs besides JRockit when you turn on WLDF instrumentation. I wrote a little sample application that verified to myself that the ECID did actually cross JVM boundaries.  I invoked a Servlet in one JVM, which acted as an EJB client to Stateless Session Bean running in another JVM.  Each call returned the same ECID.  You need to turn on WLDF Instrumentation for this to work otherwise the framework returns null.  I’m glad John put me on to this API as I have some interesting ideas on how to correlate some information together.

    Read the article

  • Perl: Negative look behind regex question [migrated]

    - by James
    The Perlre in Perldoc didn't go into much detail on negative look around but I tried testing it, and didn't work as expected. I want to see if I can differentiate a C preprocessor macro definition (e.g. #define MAX(X) ....) from actual usage (y = MAX(x);), but it didn't work as expected. my $macroName = 'MAX'; my $macroCall = "y = MAX(X);"; my $macroDef = "# define MAX(X)"; my $boundary = qr{\b$macroName\b}; my $bstr = " MAX(X)"; if($bstr =~ /$boundary/) { print "boundary: $bstr matches: $boundary\n"; } else { print "Error: no match: boundary: $bstr, $boundary\n"; } my $negLookBehind = qr{(?<!define)\b$macroName\b}; if($macroCall =~ /$negLookBehind/) # "y = MAX(X)" matches "(?<!define)\bMAX\b" { print "negative look behind: $macroCall matches: $negLookBehind\n"; } else { print "no match: negative look behind: $macroCall, $negLookBehind\n"; } if($macroDef =~ /$negLookBehind/) # "#define MAX(X)" should not match "(?<!define)\bMAX\b" { print "Error: negative look behind: $macroDef matches: $negLookBehind\n"; } else { print "no match: negative look behind: $macroDef, $negLookBehind\n"; } It seems that both $macroDef and $macroCall seem to match regex /(?<!define)\b$macroName\b/. I backed off from the original /(?<\#)\s*(?<!define)\b$macroName\b/ since that didn't work either. So what did I screw up? Also does Perl allow chaining of multiple look around expressions?

    Read the article

  • Are there any actual case studies on rewrites of software success/failure rates?

    - by James Drinkard
    I've seen multiple posts about rewrites of applications being bad, peoples experiences about it here on Programmers, and an article I've ready by Joel Splosky on the subject, but no hard evidence of case studies. Other than the two examples Joel gave and some other posts here, what do you do with a bad codebase and how do you decide what to do with it based on real studies? For the case in point, there are two clients I know of that both have old legacy code. They keep limping along with it because as one of them found out, a rewrite was a disaster, it was expensive and didn't really work to improve the code much. That customer has some very complicated business logic as the rewriters quickly found out. In both cases, these are mission critical applications that brings in a lot of revenue for the company. The one that attempted the rewrite felt that they would hit a brick wall at some point if the legacy software didn't get upgraded at some point in the future. To me, that kind of risk warrants research and analysis to ensure a successful path. My question is have there been actual case studies that have investigated this? I wouldn't want to attempt a major rewrite without knowing some best practices, pitfalls, and successes based on actual studies. Aftermath: okay, I was wrong, I did find one article: Rewrite or Reuse. They did a study on a Cobol app that was converted to Java.

    Read the article

  • Ideas for reducing storage needs and/or costs (lots of images)

    - by James P.
    Hi, I'm the webmaster for a small social network and have noticed that images uploaded by users are taking a big portion of the capacity available. These are mostly JPEGs. What solutions could I apply to reduce storage needs? Is there a way to reduce the size of images without affecting quality too much? Is there a service out there that could be used to store static files at a cheaper price (< 1GB/0.04 eurocents)? Edit: Updated the question.

    Read the article

  • One-line command to download Ubuntu ISO?

    - by James Mitch
    I want to download an Ubuntu ISO, preferably over bittorrent, and verify its integrity. Currently, the following steps are required: start web browser, go to ubuntu.com, find download link find gpg signature for the checksums get the gpg key to check gpg signature of the checksums wait until download finished gpg verifiy checksum verification Isn't there a simpler way? Just like apt-get install 12.04-64bit-ubuntu-iso apt-get install 12.04-32bit-server-iso etc.? Of course, apt-get (or whatever it would be called) should download over bittorrent to remove load from the servers. If it doesn't exist, it should probable post that at ubuntu brainstorm? Is there already such a tool? I wanted to ask before posting to brainstorm.

    Read the article

  • Is there a clean separation of my layers with this attempt at Domain Driven Design in XAML and C#

    - by Buddy James
    I'm working on an application. I'm using a mixture of TDD and DDD. I'm working hard to separate the layers of my application and that is where my question comes in. My solution is laid out as follows Solution MyApp.Domain (WinRT class library) Entity (Folder) Interfaces(Folder) IPost.cs (Interface) BlogPosts.cs(Implementation of IPost) Service (Folder) Interfaces(Folder) IDataService.cs (Interface) BlogDataService.cs (Implementation of IDataService) MyApp.Presentation(Windows 8 XAML + C# application) ViewModels(Folder) BlogViewModel.cs App.xaml MainPage.xaml (Contains a property of BlogViewModel MyApp.Tests (WinRT Unit testing project used for my TDD) So I'm planning to use my ViewModel with the XAML UI I'm writing a test and define my interfaces in my system and I have the following code thus far. [TestMethod] public void Get_Zero_Blog_Posts_From_Presentation_Layer_Returns_Empty_Collection() { IBlogViewModel viewModel = _container.Resolve<IBlogViewModel>(); viewModel.LoadBlogPosts(0); Assert.AreEqual(0, viewModel.BlogPosts.Count, "There should be 0 blog posts."); } viewModel.BlogPosts is an ObservableCollection<IPost> Now.. my first thought is that I'd like the LoadBlogPosts method on the ViewModel to call a static method on the BlogPost entity. My problem is I feel like I need to inject the IDataService into the Entity object so that it promotes loose coupling. Here are the two options that I'm struggling with: Not use a static method and use a member method on the BlogPost entity. Have the BlogPost take an IDataService in the constructor and use dependency injection to resolve the BlogPost instance and the IDataService implementation. Don't use the entity to call the IDataService. Put the IDataService in the constructor of the ViewModel and use my container to resolve the IDataService when the viewmodel is instantiated. So with option one the layers will look like this ViewModel(Presentation layer) - Entity (Domain layer) - IDataService (Service Layer) or ViewModel(Presentation layer) - IDataService (Service Layer)

    Read the article

  • C#/.NET Little Wonders: Skip() and Take()

    - by James Michael Hare
    Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. I’ve covered many valuable methods from System.Linq class library before, so you already know it’s packed with extension-method goodness.  Today I’d like to cover two small families I’ve neglected to mention before: Skip() and Take().  While these methods seem so simple, they are an easy way to create sub-sequences for IEnumerable<T>, much the way GetRange() creates sub-lists for List<T>. Skip() and SkipWhile() The Skip() family of methods is used to ignore items in a sequence until either a certain number are passed, or until a certain condition becomes false.  This makes the methods great for starting a sequence at a point possibly other than the first item of the original sequence.   The Skip() family of methods contains the following methods (shown below in extension method syntax): Skip(int count) Ignores the specified number of items and returns a sequence starting at the item after the last skipped item (if any).  SkipWhile(Func<T, bool> predicate) Ignores items as long as the predicate returns true and returns a sequence starting with the first item to invalidate the predicate (if any).  SkipWhile(Func<T, int, bool> predicate) Same as above, but passes not only the item itself to the predicate, but also the index of the item.  For example: 1: var list = new[] { 3.14, 2.72, 42.0, 9.9, 13.0, 101.0 }; 2:  3: // sequence contains { 2.72, 42.0, 9.9, 13.0, 101.0 } 4: var afterSecond = list.Skip(1); 5: Console.WriteLine(string.Join(", ", afterSecond)); 6:  7: // sequence contains { 42.0, 9.9, 13.0, 101.0 } 8: var afterFirstDoubleDigit = list.SkipWhile(v => v < 10.0); 9: Console.WriteLine(string.Join(", ", afterFirstDoubleDigit)); Note that the SkipWhile() stops skipping at the first item that returns false and returns from there to the rest of the sequence, even if further items in that sequence also would satisfy the predicate (otherwise, you’d probably be using Where() instead, of course). If you do use the form of SkipWhile() which also passes an index into the predicate, then you should keep in mind that this is the index of the item in the sequence you are calling SkipWhile() from, not the index in the original collection.  That is, consider the following: 1: var list = new[] { 1.0, 1.1, 1.2, 2.2, 2.3, 2.4 }; 2:  3: // Get all items < 10, then 4: var whatAmI = list 5: .Skip(2) 6: .SkipWhile((i, x) => i > x); For this example the result above is 2.4, and not 1.2, 2.2, 2.3, 2.4 as some might expect.  The key is knowing what the index is that’s passed to the predicate in SkipWhile().  In the code above, because Skip(2) skips 1.0 and 1.1, the sequence passed to SkipWhile() begins at 1.2 and thus it considers the “index” of 1.2 to be 0 and not 2.  This same logic applies when using any of the extension methods that have an overload that allows you to pass an index into the delegate, such as SkipWhile(), TakeWhile(), Select(), Where(), etc.  It should also be noted, that it’s fine to Skip() more items than exist in the sequence (an empty sequence is the result), or even to Skip(0) which results in the full sequence.  So why would it ever be useful to return Skip(0) deliberately?  One reason might be to return a List<T> as an immutable sequence.  Consider this class: 1: public class MyClass 2: { 3: private List<int> _myList = new List<int>(); 4:  5: // works on surface, but one can cast back to List<int> and mutate the original... 6: public IEnumerable<int> OneWay 7: { 8: get { return _myList; } 9: } 10:  11: // works, but still has Add() etc which throw at runtime if accidentally called 12: public ReadOnlyCollection<int> AnotherWay 13: { 14: get { return new ReadOnlyCollection<int>(_myList); } 15: } 16:  17: // immutable, can't be cast back to List<int>, doesn't have methods that throw at runtime 18: public IEnumerable<int> YetAnotherWay 19: { 20: get { return _myList.Skip(0); } 21: } 22: } This code snippet shows three (among many) ways to return an internal sequence in varying levels of immutability.  Obviously if you just try to return as IEnumerable<T> without doing anything more, there’s always the danger the caller could cast back to List<T> and mutate your internal structure.  You could also return a ReadOnlyCollection<T>, but this still has the mutating methods, they just throw at runtime when called instead of giving compiler errors.  Finally, you can return the internal list as a sequence using Skip(0) which skips no items and just runs an iterator through the list.  The result is an iterator, which cannot be cast back to List<T>.  Of course, there’s many ways to do this (including just cloning the list, etc.) but the point is it illustrates a potential use of using an explicit Skip(0). Take() and TakeWhile() The Take() and TakeWhile() methods can be though of as somewhat of the inverse of Skip() and SkipWhile().  That is, while Skip() ignores the first X items and returns the rest, Take() returns a sequence of the first X items and ignores the rest.  Since they are somewhat of an inverse of each other, it makes sense that their calling signatures are identical (beyond the method name obviously): Take(int count) Returns a sequence containing up to the specified number of items. Anything after the count is ignored. TakeWhile(Func<T, bool> predicate) Returns a sequence containing items as long as the predicate returns true.  Anything from the point the predicate returns false and beyond is ignored. TakeWhile(Func<T, int, bool> predicate) Same as above, but passes not only the item itself to the predicate, but also the index of the item. So, for example, we could do the following: 1: var list = new[] { 1.0, 1.1, 1.2, 2.2, 2.3, 2.4 }; 2:  3: // sequence contains 1.0 and 1.1 4: var firstTwo = list.Take(2); 5:  6: // sequence contains 1.0, 1.1, 1.2 7: var underTwo = list.TakeWhile(i => i < 2.0); The same considerations for SkipWhile() with index apply to TakeWhile() with index, of course.  Using Skip() and Take() for sub-sequences A few weeks back, I talked about The List<T> Range Methods and showed how they could be used to get a sub-list of a List<T>.  This works well if you’re dealing with List<T>, or don’t mind converting to List<T>.  But if you have a simple IEnumerable<T> sequence and want to get a sub-sequence, you can also use Skip() and Take() to much the same effect: 1: var list = new List<double> { 1.0, 1.1, 1.2, 2.2, 2.3, 2.4 }; 2:  3: // results in List<T> containing { 1.2, 2.2, 2.3 } 4: var subList = list.GetRange(2, 3); 5:  6: // results in sequence containing { 1.2, 2.2, 2.3 } 7: var subSequence = list.Skip(2).Take(3); I say “much the same effect” because there are some differences.  First of all GetRange() will throw if the starting index or the count are greater than the number of items in the list, but Skip() and Take() do not.  Also GetRange() is a method off of List<T>, thus it can use direct indexing to get to the items much more efficiently, whereas Skip() and Take() operate on sequences and may actually have to walk through the items they skip to create the resulting sequence.  So each has their pros and cons.  My general rule of thumb is if I’m already working with a List<T> I’ll use GetRange(), but for any plain IEnumerable<T> sequence I’ll tend to prefer Skip() and Take() instead. Summary The Skip() and Take() families of LINQ extension methods are handy for producing sub-sequences from any IEnumerable<T> sequence.  Skip() will ignore the specified number of items and return the rest of the sequence, whereas Take() will return the specified number of items and ignore the rest of the sequence.  Similarly, the SkipWhile() and TakeWhile() methods can be used to skip or take items, respectively, until a given predicate returns false.    Technorati Tags: C#, CSharp, .NET, LINQ, IEnumerable<T>, Skip, Take, SkipWhile, TakeWhile

    Read the article

  • PHP questions and answers

    - by Daniel James Clarke
    Hi guys I'm a web designer and front end developer, however our only back end developer has quit and left the company. The head of development(who is a desktop developer) has asked me to find a set of Questions and Answers that are of OOP level for a LAMP developer so we can see if new candidates for the job are up to scratch. As a designer I'm out of my depth and he's unfamiliar with LAMP development. Dan

    Read the article

  • hplip tries to print from photo tray

    - by James Bradbury
    I have hplip-3.14.4 with an HP Photosmart b210a and recently it has stopped printing properly. The issue is that it tries to print from the photo tray (which we don't use). I've tried setting this manually via the Settings page, but it makes no difference. My wife has the same issue (also using Ubuntu 12.04). EDIT: I've just set the printer up in Windows 7 and it works. So this is not a hardware fault and likely due to hplip or some Ubuntu software issue. Rolling back the driver to 3.13.8 does not make any difference. What else can I try

    Read the article

  • What is Atomicity?

    - by James Jeffery
    I'm really struggling to find a concrete, easy to grasp, explanation of Atomicity. My understanding thus far is that to ensure an operation is atomic you wrap the critical code in a locker. But that's about as much as I actually understand. Definitions such as the one below make no sense to me at all. An operation during which a processor can simultaneously read a location and write it in the same bus operation. This prevents any other processor or I/O device from writing or reading memory until the operation is complete. Atomic implies indivisibility and irreducibility, so an atomic operation must be performed entirely or not performed at all. What does the last sentence mean? Is the term indivisibility relating to mathematics or something else? Sometimes the jargon with these topics confuse more than they teach.

    Read the article

  • C#/.NET Little Wonders: Static Char Methods

    - by James Michael Hare
    Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. Often times in our code we deal with the bigger classes and types in the BCL, and occasionally forgot that there are some nice methods on the primitive types as well.  Today we will discuss some of the handy static methods that exist on the char (the C# alias of System.Char) type. The Background I was examining a piece of code this week where I saw the following: 1: // need to get the 5th (offset 4) character in upper case 2: var type = symbol.Substring(4, 1).ToUpper(); 3:  4: // test to see if the type is P 5: if (type == "P") 6: { 7: // ... do something with P type... 8: } Is there really any error in this code?  No, but it still struck me wrong because it is allocating two very short-lived throw-away strings, just to store and manipulate a single char: The call to Substring() generates a new string of length 1 The call to ToUpper() generates a new upper-case version of the string from Step 1. In my mind this is similar to using ToUpper() to do a case-insensitive compare: it isn’t wrong, it’s just much heavier than it needs to be (for more info on case-insensitive compares, see #2 in 5 More Little Wonders). One of my favorite books is the C++ Coding Standards: 101 Rules, Guidelines, and Best Practices by Sutter and Alexandrescu.  True, it’s about C++ standards, but there’s also some great general programming advice in there, including two rules I love:         8. Don’t Optimize Prematurely         9. Don’t Pessimize Prematurely We all know what #8 means: don’t optimize when there is no immediate need, especially at the expense of readability and maintainability.  I firmly believe this and in the axiom: it’s easier to make correct code fast than to make fast code correct.  Optimizing code to the point that it becomes difficult to maintain often gains little and often gives you little bang for the buck. But what about #9?  Well, for that they state: “All other things being equal, notably code complexity and readability, certain efficient design patterns and coding idioms should just flow naturally from your fingertips and are no harder to write then the pessimized alternatives. This is not premature optimization; it is avoiding gratuitous pessimization.” Or, if I may paraphrase: “where it doesn’t increase the code complexity and readability, prefer the more efficient option”. The example code above was one of those times I feel where we are violating a tacit C# coding idiom: avoid creating unnecessary temporary strings.  The code creates temporary strings to hold one char, which is just unnecessary.  I think the original coder thought he had to do this because ToUpper() is an instance method on string but not on char.  What he didn’t know, however, is that ToUpper() does exist on char, it’s just a static method instead (though you could write an extension method to make it look instance-ish). This leads me (in a long-winded way) to my Little Wonders for the day… Static Methods of System.Char So let’s look at some of these handy, and often overlooked, static methods on the char type: IsDigit(), IsLetter(), IsLetterOrDigit(), IsPunctuation(), IsWhiteSpace() Methods to tell you whether a char (or position in a string) belongs to a category of characters. IsLower(), IsUpper() Methods that check if a char (or position in a string) is lower or upper case ToLower(), ToUpper() Methods that convert a single char to the lower or upper equivalent. For example, if you wanted to see if a string contained any lower case characters, you could do the following: 1: if (symbol.Any(c => char.IsLower(c))) 2: { 3: // ... 4: } Which, incidentally, we could use a method group to shorten the expression to: 1: if (symbol.Any(char.IsLower)) 2: { 3: // ... 4: } Or, if you wanted to verify that all of the characters in a string are digits: 1: if (symbol.All(char.IsDigit)) 2: { 3: // ... 4: } Also, for the IsXxx() methods, there are overloads that take either a char, or a string and an index, this means that these two calls are logically identical: 1: // check given a character 2: if (char.IsUpper(symbol[0])) { ... } 3:  4: // check given a string and index 5: if (char.IsUpper(symbol, 0)) { ... } Obviously, if you just have a char, then you’d just use the first form.  But if you have a string you can use either form equally well. As a side note, care should be taken when examining all the available static methods on the System.Char type, as some seem to be redundant but actually have very different purposes.  For example, there are IsDigit() and IsNumeric() methods, which sound the same on the surface, but give you different results. IsDigit() returns true if it is a base-10 digit character (‘0’, ‘1’, … ‘9’) where IsNumeric() returns true if it’s any numeric character including the characters for ½, ¼, etc. Summary To come full circle back to our opening example, I would have preferred the code be written like this: 1: // grab 5th char and take upper case version of it 2: var type = char.ToUpper(symbol[4]); 3:  4: if (type == 'P') 5: { 6: // ... do something with P type... 7: } Not only is it just as readable (if not more so), but it performs over 3x faster on my machine:    1,000,000 iterations of char method took: 30 ms, 0.000050 ms/item.    1,000,000 iterations of string method took: 101 ms, 0.000101 ms/item. It’s not only immediately faster because we don’t allocate temporary strings, but as an added bonus there less garbage to collect later as well.  To me this qualifies as a case where we are using a common C# performance idiom (don’t create unnecessary temporary strings) to make our code better. Technorati Tags: C#,CSharp,.NET,Little Wonders,char,string

    Read the article

  • SEO Keyword Research

    - by James
    Hi Everyone, I'm new at SEO and keyword research. I am using Market Samurai as my research tool, and I was wondering if I could ask for your help to identify the best key word to target for my niche. I do plan on incorporating all of them into my site, but I wanted to start with one. If you could give me your input on these keywords, I would appreciate it. This is all new to me :) I'm too new to post pictures, but here are my keywords (Searches, SEO Traffic, and SEO Value / Day): Searches | SEO Traffic | PBR | SEO Value | Average PR/Backlinks of Current Top 10 1: 730 | 307 | 20% | 2311.33 | 1.9 / 7k-60k 2: 325 | 137 | 24% | 822.94 | 2.3 / 7k-60k 3: 398 | 167 | 82% | 589.79 | 1.6 / 7k-60k I'm wondering if the PBR (Phrase-to-broad) value of #1 is too low. It seems like the best value because the SEOV is crazy high. That is like $70k a month. #3 has the highest PBR, but also the lowest SEOV. #2 doesn't seem worth it because of the PR competetion. Might be a little too hard to get into the top page of Google. I'm wondering which keywords to target, and if I should be looking at any other metric to see if this is a profitable niche to jump into. Thanks.

    Read the article

  • C#/.NET Little Wonders: Constraining Generics with Where Clause

    - by James Michael Hare
    Back when I was primarily a C++ developer, I loved C++ templates.  The power of writing very reusable generic classes brought the art of programming to a brand new level.  Unfortunately, when .NET 1.0 came about, they didn’t have a template equivalent.  With .NET 2.0 however, we finally got generics, which once again let us spread our wings and program more generically in the world of .NET However, C# generics behave in some ways very differently from their C++ template cousins.  There is a handy clause, however, that helps you navigate these waters to make your generics more powerful. The Problem – C# Assumes Lowest Common Denominator In C++, you can create a template and do nearly anything syntactically possible on the template parameter, and C++ will not check if the method/fields/operations invoked are valid until you declare a realization of the type.  Let me illustrate with a C++ example: 1: // compiles fine, C++ makes no assumptions as to T 2: template <typename T> 3: class ReverseComparer 4: { 5: public: 6: int Compare(const T& lhs, const T& rhs) 7: { 8: return rhs.CompareTo(lhs); 9: } 10: }; Notice that we are invoking a method CompareTo() off of template type T.  Because we don’t know at this point what type T is, C++ makes no assumptions and there are no errors. C++ tends to take the path of not checking the template type usage until the method is actually invoked with a specific type, which differs from the behavior of C#: 1: // this will NOT compile! C# assumes lowest common denominator. 2: public class ReverseComparer<T> 3: { 4: public int Compare(T lhs, T rhs) 5: { 6: return lhs.CompareTo(rhs); 7: } 8: } So why does C# give us a compiler error even when we don’t yet know what type T is?  This is because C# took a different path in how they made generics.  Unless you specify otherwise, for the purposes of the code inside the generic method, T is basically treated like an object (notice I didn’t say T is an object). That means that any operations, fields, methods, properties, etc that you attempt to use of type T must be available at the lowest common denominator type: object.  Now, while object has the broadest applicability, it also has the fewest specific.  So how do we allow our generic type placeholder to do things more than just what object can do? Solution: Constraint the Type With Where Clause So how do we get around this in C#?  The answer is to constrain the generic type placeholder with the where clause.  Basically, the where clause allows you to specify additional constraints on what the actual type used to fill the generic type placeholder must support. You might think that narrowing the scope of a generic means a weaker generic.  In reality, though it limits the number of types that can be used with the generic, it also gives the generic more power to deal with those types.  In effect these constraints says that if the type meets the given constraint, you can perform the activities that pertain to that constraint with the generic placeholders. Constraining Generic Type to Interface or Superclass One of the handiest where clause constraints is the ability to specify the type generic type must implement a certain interface or be inherited from a certain base class. For example, you can’t call CompareTo() in our first C# generic without constraints, but if we constrain T to IComparable<T>, we can: 1: public class ReverseComparer<T> 2: where T : IComparable<T> 3: { 4: public int Compare(T lhs, T rhs) 5: { 6: return lhs.CompareTo(rhs); 7: } 8: } Now that we’ve constrained T to an implementation of IComparable<T>, this means that our variables of generic type T may now call any members specified in IComparable<T> as well.  This means that the call to CompareTo() is now legal. If you constrain your type, also, you will get compiler warnings if you attempt to use a type that doesn’t meet the constraint.  This is much better than the syntax error you would get within C++ template code itself when you used a type not supported by a C++ template. Constraining Generic Type to Only Reference Types Sometimes, you want to assign an instance of a generic type to null, but you can’t do this without constraints, because you have no guarantee that the type used to realize the generic is not a value type, where null is meaningless. Well, we can fix this by specifying the class constraint in the where clause.  By declaring that a generic type must be a class, we are saying that it is a reference type, and this allows us to assign null to instances of that type: 1: public static class ObjectExtensions 2: { 3: public static TOut Maybe<TIn, TOut>(this TIn value, Func<TIn, TOut> accessor) 4: where TOut : class 5: where TIn : class 6: { 7: return (value != null) ? accessor(value) : null; 8: } 9: } In the example above, we want to be able to access a property off of a reference, and if that reference is null, pass the null on down the line.  To do this, both the input type and the output type must be reference types (yes, nullable value types could also be considered applicable at a logical level, but there’s not a direct constraint for those). Constraining Generic Type to only Value Types Similarly to constraining a generic type to be a reference type, you can also constrain a generic type to be a value type.  To do this you use the struct constraint which specifies that the generic type must be a value type (primitive, struct, enum, etc). Consider the following method, that will convert anything that is IConvertible (int, double, string, etc) to the value type you specify, or null if the instance is null. 1: public static T? ConvertToNullable<T>(IConvertible value) 2: where T : struct 3: { 4: T? result = null; 5:  6: if (value != null) 7: { 8: result = (T)Convert.ChangeType(value, typeof(T)); 9: } 10:  11: return result; 12: } Because T was constrained to be a value type, we can use T? (System.Nullable<T>) where we could not do this if T was a reference type. Constraining Generic Type to Require Default Constructor You can also constrain a type to require existence of a default constructor.  Because by default C# doesn’t know what constructors a generic type placeholder does or does not have available, it can’t typically allow you to call one.  That said, if you give it the new() constraint, it will mean that the type used to realize the generic type must have a default (no argument) constructor. Let’s assume you have a generic adapter class that, given some mappings, will adapt an item from type TFrom to type TTo.  Because it must create a new instance of type TTo in the process, we need to specify that TTo has a default constructor: 1: // Given a set of Action<TFrom,TTo> mappings will map TFrom to TTo 2: public class Adapter<TFrom, TTo> : IEnumerable<Action<TFrom, TTo>> 3: where TTo : class, new() 4: { 5: // The list of translations from TFrom to TTo 6: public List<Action<TFrom, TTo>> Translations { get; private set; } 7:  8: // Construct with empty translation and reverse translation sets. 9: public Adapter() 10: { 11: // did this instead of auto-properties to allow simple use of initializers 12: Translations = new List<Action<TFrom, TTo>>(); 13: } 14:  15: // Add a translator to the collection, useful for initializer list 16: public void Add(Action<TFrom, TTo> translation) 17: { 18: Translations.Add(translation); 19: } 20:  21: // Add a translator that first checks a predicate to determine if the translation 22: // should be performed, then translates if the predicate returns true 23: public void Add(Predicate<TFrom> conditional, Action<TFrom, TTo> translation) 24: { 25: Translations.Add((from, to) => 26: { 27: if (conditional(from)) 28: { 29: translation(from, to); 30: } 31: }); 32: } 33:  34: // Translates an object forward from TFrom object to TTo object. 35: public TTo Adapt(TFrom sourceObject) 36: { 37: var resultObject = new TTo(); 38:  39: // Process each translation 40: Translations.ForEach(t => t(sourceObject, resultObject)); 41:  42: return resultObject; 43: } 44:  45: // Returns an enumerator that iterates through the collection. 46: public IEnumerator<Action<TFrom, TTo>> GetEnumerator() 47: { 48: return Translations.GetEnumerator(); 49: } 50:  51: // Returns an enumerator that iterates through a collection. 52: IEnumerator IEnumerable.GetEnumerator() 53: { 54: return GetEnumerator(); 55: } 56: } Notice, however, you can’t specify any other constructor, you can only specify that the type has a default (no argument) constructor. Summary The where clause is an excellent tool that gives your .NET generics even more power to perform tasks higher than just the base "object level" behavior.  There are a few things you cannot specify with constraints (currently) though: Cannot specify the generic type must be an enum. Cannot specify the generic type must have a certain property or method without specifying a base class or interface – that is, you can’t say that the generic must have a Start() method. Cannot specify that the generic type allows arithmetic operations. Cannot specify that the generic type requires a specific non-default constructor. In addition, you cannot overload a template definition with different, opposing constraints.  For example you can’t define a Adapter<T> where T : struct and Adapter<T> where T : class.  Hopefully, in the future we will get some of these things to make the where clause even more useful, but until then what we have is extremely valuable in making our generics more user friendly and more powerful!   Technorati Tags: C#,.NET,Little Wonders,BlackRabbitCoder,where,generics

    Read the article

  • ubuntu 13.04 - wireless settings help

    - by James Ellis
    Im having problems connecting my wifi in Ubuntu 13.04 So i was wondering if filling in the data manually ie: the IPv4, IPv6, the SSID and BSSID info etc. I did try this before but maybe i put in the wrong data or maybe not enough Would that make it work?? I just dont know how to find out some of the data you need to put in or if im putting the wrong stuff in??? Im new and its confusing. does anyone know the solution?

    Read the article

  • Pre-built Oracle VirtualBox Images

    - by james.bayer
    I’m thrilled to see that Justin Kestelyn has a post that pre-built Oracle VirtualBox images are now available on OTN.  There are VMs for various Oracle software stacks including one for Database, one for Java with Glassfish, and one for SOA and BPM products that includes WebLogic Server. This is just one example of the synergy of a combined Oracle and Sun delivering improvements for customers.  These VMs make it even more straight-forward to get started with Oracle software in a development environment without having to worry about initial software installation and configuration. I’ve been a bit quiet lately on the blogging front, but I’m currently working on another area leveraging the best of Oracle and Sun.  Oracle is uniquely positioned to deliver engineered systems that optimize the entire stack of software and hardware.  You’ve probably seen the announcements about Exalogic and I’m excited about the potential to deliver major advancements for middleware.  More to come…

    Read the article

  • Broadcom WiFi drivers conflict

    - by james
    $ sudo dpkg -i wireless-bcm43142-dkms-6.20.55.19_amd64.deb dpkg: acerca de wireless-bcm43142-dkms-6.20.55.19_amd64.deb que contiene wireless-bcm43142-oneiric-dkms: wireless-bcm43142-oneiric-dkms entra en conflicto con bcmwl-kernel-source bcmwl-kernel-source (versión 6.20.155.1+bdcom-0ubuntu0.0.2) está presente y instalado. dpkg: error al procesar wireless-bcm43142-dkms-6.20.55.19_amd64.deb (--install): paquetes en conflicto - no se instalará wireless-bcm43142-oneiric-dkms Se encontraron errores al procesar: wireless-bcm43142-dkms-6.20.55.19_amd64.deb Help me find a solution to install this .deb package.

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >