Search Results

Search found 293 results on 12 pages for 'maverick'.

Page 12/12 | < Previous Page | 8 9 10 11 12 

  • sysbench memory test on ec2 small instance

    - by caribio
    I'm seeing a problem with sysbench memory test (the default version that's compiled in). This is on Ubuntu Maverick, sysbench installed via apt-get install sysbench. Running the same thing on Ubuntu @ Rackspace worked just as expected. While the CPU and I/O tests worked fine on EC2 servers, the memory test just runs without doing anything (notice the 0M in the test results). The instance used was the publicly available 'stock' Ubuntu image with no changes to it: ./ec2-run-instances ami-ccf405a5 --instance-type m1.small --region us-east-1 --key mykey Supplying more arguments (such as: --memory-block-size=1K --memory-total-size=102400M) didn't help. What am I doing wrong? Thanks. sysbench --num-threads=4 --test=memory run sysbench 0.4.12: multi-threaded system evaluation benchmark Running the test with following options: Number of threads: 4 Doing memory operations speed test Memory block size: 1K Memory transfer size: 0M Memory operations type: write Memory scope type: global Threads started! Done. Operations performed: 0 ( 0.00 ops/sec) 0.00 MB transferred (0.00 MB/sec) Test execution summary: total time: 0.0003s total number of events: 0 total time taken by event execution: 0.0000 per-request statistics: min: 18446744073709.55ms avg: 0.00ms max: 0.00ms Threads fairness: events (avg/stddev): 0.0000/0.00 execution time (avg/stddev): 0.0000/0.00

    Read the article

  • Scripting a permanent CTRL / CAPS swap in Gnome?

    - by Duncan Bayne
    I have a bash script that I use to configure a vanilla Ubuntu (10.10 Maverick Meerkat) installation to be exactly the way I want it. I make extensive use of gconftool-2 to configure the desktop, set up shortcut keys, etc. Now, I'm trying to swap the CTRL and CAPS keys. I have found two ways of doing this: In Gnome, go to System - Preferences - Keyboard - Layout - Options and make the change in there. This works well, but I don't know how to script this; the setting doesn't seem to be stored in the usual place as I can't find it with gconf-editor. Add the line setxkbmap -option "ctrl:swapcaps" to my .bashrc file. That works too, until I suspend the machine & then resume it. At that point the CTRL and CAPS behaviour return to normal, until I cause .bashrc to be run again by opening a new shell. This behaviour has been reported as a bug in RedHat. Could someone please suggest a way of switching those keys that is both permanent, and can be scripted? I'm sure I must be missing something obvious here ...

    Read the article

  • Ubuntu in failed state after upgrade from 10.04 to 10.10 - How to recover?

    - by Harvey
    I was running Ubuntu 10.04 and attempted to upgrade to 10.10. I have a really slow connection (DSL 128kbits/sec) and copying the upgrade files took about 26 hours. I of course let it run unattended. When I came back, I notice the following 3 dlgs: 1. Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg -- configure -a). 2. gpk-update-icon Distribution upgrades available maverick 10.10 (stable) [more information] [Do no show this again] [Cancel] [Ok] 3. gpk-update-icon Security updates available The following important updates are available for your computer: libwebkit-1.0-2-dbg - Web content engine library for Gtk+ - Debugging symbols libcupsimage2 - Common UNIX Printing System(tm) - Raster image library ... What is the best response to all of this? I went through something similar in an attempted network upgrade from 8.04 to 10.04 and had to reload the unbootable machine fresh from distribution media (all data was lost). I'd like to avoid that here. I have not yet responded to the dialogs, and want to make sure the system is still bootable and not lose my data this time.

    Read the article

  • Can't add repos after upgrading to 12.04 LTS

    - by joao
    I'm a complete Linux newbie. I've just upgraded from 10.04 to 12.04 LTS and all sorts of things have started to go wrong. One main problem is the fact that I can't add repos. Example: sudo add-apt-repository ppa:team-xbmc outputs: Traceback (most recent call last): File "/usr/bin/add-apt-repository", line 8, in <module> from softwareproperties.SoftwareProperties import SoftwareProperties File "/usr/lib/python2.7/dist-packages/softwareproperties/SoftwareProperties.py", line 53, in <module> from ppa import AddPPASigningKeyThread, expand_ppa_line File "/usr/lib/python2.7/dist-packages/softwareproperties/ppa.py", line 27, in <module> import pycurl ImportError: librtmp.so.0: cannot open shared object file: No such file or directory /etc/apt/sources.list # deb cdrom:[Ubuntu 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.1)]/ lucid main restricted # deb cdrom:[Ubuntu 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.1)]/ maverick main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu precise main restricted deb-src http://archive.ubuntu.com/ubuntu precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu precise-updates main restricted deb-src http://archive.ubuntu.com/ubuntu precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise universe deb-src http://archive.ubuntu.com/ubuntu precise universe deb http://archive.ubuntu.com/ubuntu precise-updates universe deb-src http://archive.ubuntu.com/ubuntu precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu precise multiverse deb-src http://archive.ubuntu.com/ubuntu precise multiverse deb http://archive.ubuntu.com/ubuntu precise-updates multiverse deb-src http://archive.ubuntu.com/ubuntu precise-updates multiverse ## Uncomment the following two lines to add software from the 'backports' ## repository. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. # deb-src http://pt.archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu lucid partner # deb-src http://archive.canonical.com/ubuntu lucid partner deb http://archive.ubuntu.com/ubuntu precise-security main restricted deb-src http://archive.ubuntu.com/ubuntu precise-security main restricted deb http://archive.ubuntu.com/ubuntu precise-security universe deb-src http://archive.ubuntu.com/ubuntu precise-security universe deb http://archive.ubuntu.com/ubuntu precise-security multiverse deb-src http://archive.ubuntu.com/ubuntu precise-security multiverse # deb http://ppa.launchpad.net/stebbins/handbrake-snapshots/ubuntu precise main # disabled on upgrade to precise I have no clue what do do next. Should I just scrap this installation and start from scratch or is this fixable? librtmp.so.0 also shows up in error logs I've started to get from XBMC (I'm not sure if this is relevant info). Thanks in advance for any help you can give me!

    Read the article

  • Graphics trouble after resuming from hibernate or suspend

    - by Voyagerfan5761
    I have a Dell Inspiron 2650 (with NVidia graphics, using nouveau drivers) that I'm using to try out Ubuntu. It's all great, except that Hibernate and Suspend aren't usable. Yes, I know that questions about power-save issues are rampant in the Linux support universe, but it seems that every time I find a solution it's for a very specific hardware combination and doesn't apply to me. So anyway, here goes. When I resume from either power-saving mode, I'll get graphics problems anywhere on the range from a few scattered random-colored pixels that won't change; all the way to full-screen patterns that don't change as I move the mouse, hit keys on the keyboard, or even bring up the shutdown dialog using the power button. Those full-screen issues (which may involve stripes with random pixels, partial black screen, or both) always end in me forcing the machine to shut down by holding the power button. I haven't done much testing yet to determine what severity level is most commonly associated with each mode, but I do avoid using either power-save option because of these issues. I'll add info on my hardware as I can gather it (no home internet connection, and this laptop is tethered to my desk by a dead battery and casing degradation). Please feel free to request something specific in the question comments. Hardware Info See this hardinfo report for my system's hardware configuration. (No, my username is not "myuser"; I sanitized hardinfo's output before publishing it.) Screenshots These screenshots are from a relatively mild occurrence, which happened after the second hibernation I took that session. The first one worked great, though I used the wireless card and Firefox heavily between the two hibernation attempts. Take a look at what happened when I opened my home directory in Nautilus and scrolled it: See below for the situations I've tested so far. The real trouble comes when the machine resumes to an unusable state; in such cases I can't even unlock the screen or properly reboot, much less take a screenshot. I have a hunch that putting a CD in the drive will cause such major failures, and I will try that at some point; see related question. Situations Tested Maverick (10.10) Suspend Seems to suspend nicely with nothing running Seems to suspend nicely with flash drive plugged in On resume from suspend with no flash drive, Terminal and gedit running: Funky graphics on top of log output, then blank screen with pixelated cursor; no response to power button (normally will shutdown 60 seconds later) Hibernate Seems to hibernate nicely with nothing running Seems to hibernate nicely with a few apps (Terminal, Mouse preferences) running Seems to not hibernate when flash drive plugged in Seems to not hibernate when System Monitor is running Have encountered failed hibernation (after several hours and one successful hibernate/thaw cycle) with no external media connected and no programs running except normal background stuff Natty LiveCD (11.04_2010-12-22) When I tested it, Natty wouldn't stay logged in. It played part of the login sound and then [ OK ] appeared in the top right corner (white-on-black terminal text) for a few seconds. Then it kicked me back to the Unlock screen. It did that four times before I gave up and just tested suspend from the Unlock screen. Suspend Resumed to vertical gray and black lines 2px (?) wide, then shifted to vertical "jail bars" of black over a black screen with above-described random pixels and mouse pointer. No apparent response to input from mouse (clicking randomly). Keyboard and touchpad unrecognized.

    Read the article

  • cx_Oracle makes subprocess give OSError

    - by Shrikant Sharat
    I am trying to use the cx_Oracle module with python 2.6.6 on ubuntu Maverick, with Oracle 11gR2 Enterprise edition. I am able to connect to my oracle db just fine, but once I do that, the subprocess module does not work anymore. Here is an iPython session that reproduces the problem... In [1]: import subprocess as sp, cx_Oracle as dbh In [2]: sp.call(['whoami']) sharat Out[2]: 0 In [3]: con = dbh.connect('system', 'password') In [4]: con.close() In [5]: sp.call(['whomai']) --------------------------------------------------------------------------- OSError Traceback (most recent call last) /home/sharat/desk/calypso-launcher/<ipython console> in <module>() /usr/lib/python2.6/subprocess.pyc in call(*popenargs, **kwargs) 468 retcode = call(["ls", "-l"]) 469 """ --> 470 return Popen(*popenargs, **kwargs).wait() 471 472 /usr/lib/python2.6/subprocess.pyc in __init__(self, args, bufsize, executable, stdin, stdout, stderr, preexec_fn, close_fds, shell, cwd, env, universal_newlines, startupinfo, creationflags) 621 p2cread, p2cwrite, 622 c2pread, c2pwrite, --> 623 errread, errwrite) 624 625 if mswindows: /usr/lib/python2.6/subprocess.pyc in _execute_child(self, args, executable, preexec_fn, close_fds, cwd, env, universal_newlines, startupinfo, creationflags, shell, p2cread, p2cwrite, c2pread, c2pwrite, errread, errwrite) 1134 1135 if data != "": -> 1136 _eintr_retry_call(os.waitpid, self.pid, 0) 1137 child_exception = pickle.loads(data) 1138 for fd in (p2cwrite, c2pread, errread): /usr/lib/python2.6/subprocess.pyc in _eintr_retry_call(func, *args) 453 while True: 454 try: --> 455 return func(*args) 456 except OSError, e: 457 if e.errno == errno.EINTR: OSError: [Errno 10] No child processes So, the call to sp.call works fine before connecting to oracle, but breaks after that. Even if I have closed the connection to the database. Looking around, I found http://bugs.python.org/issue1731717 as somewhat related to this issue, but I am not dealing with threads here. I don't know if cx_Oracle is. Moreover, the above issue mentions that adding a time.sleep(1) fixes it, but it didn't help me. Any help appreciated. Thanks.

    Read the article

  • autocomplete not working on one sever, works on others

    - by dogmatic69
    I have Ubuntu 10.10 x64 and x86 running on various servers and auto complete works on all of them bar one. The issue: apt-<tab> would show a list of options but sudo apt-<tab> would not. After fiddling with it for a few hours i've found that /etc/bash_autocomplete did not exist. on the broken server. Copying the one from a working one it now works. but still not properly. sudo apt-get ins<tab> does not show do anything. listing the files in /etc/bash_autocomplete.d/ on the working server has about 50 files, and the broken one only two or three. i dont think that i can just copy these files though as it might show commands for things that are not even installed. TL;DR autocomplete broken, how can i fix it. Seems like its disabled somewhere, why is this EDIT: Ok, it was not ever installed... $ sudo apt-get install bash-completion Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed bash-completion 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. Need to get 140kB of archives. After this operation, 1,061kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ maverick-updates/main bash-completion all 1:1.2-2ubuntu1.1 [140kB] Fetched 140kB in 0s (174kB/s) Selecting previously deselected package bash-completion. (Reading database ... 23808 files and directories currently installed.) Unpacking bash-completion (from .../bash-completion_1%3a1.2-2ubuntu1.1_all.deb) ... Processing triggers for man-db ... Setting up bash-completion (1:1.2-2ubuntu1.1) ... its now kinda working, but still wonky... apt-get ins<tab> gives sudo apt-get insserv as the option. also apt-get install php5<tab> gives apt-get install php5/ not php5-* options.

    Read the article

  • Django + gunicorn + virtualenv + Supervisord issue

    - by Florian Le Goff
    Dear all, I have a strange issue with my virtualenv + gunicorn setup, only when gunicorn is launched via supervisord. I do realize that it may very well be an issue with my supervisord and I would appreciate any feedback on a better place to ask for help... In a nutshell : when I run gunicorn from my user shell, inside my virtualenv, everything is working flawlessly. I'm able to access all the views of my Django project. When gunicorn is launched by supervisord at the system startup, everything is OK. But, if I have to kill the gunicorn_django processes, or if I perform a supervisord restart, once that gunicorn_django has relaunched, every request is answered with a weird Traceback : (...) File "/home/hc/prod/venv/lib/python2.6/site-packages/Django-1.2.5-py2.6.egg/django/db/__init__.py", line 77, in connection = connections[DEFAULT_DB_ALIAS] File "/home/hc/prod/venv/lib/python2.6/site-packages/Django-1.2.5-py2.6.egg/django/db/utils.py", line 92, in __getitem__ backend = load_backend(db['ENGINE']) File "/home/hc/prod/venv/lib/python2.6/site-packages/Django-1.2.5-py2.6.egg/django/db/utils.py", line 50, in load_backend raise ImproperlyConfigured(error_msg) TemplateSyntaxError: Caught ImproperlyConfigured while rendering: 'django.db.backends.postgresql_psycopg2' isn't an available database backend. Try using django.db.backends.XXX, where XXX is one of: 'dummy', 'mysql', 'oracle', 'postgresql', 'postgresql_psycopg2', 'sqlite3' Error was: cannot import name utils Full stack available here : http://pastebin.com/BJ5tNQ2N I'm running... Ubuntu/maverick (up-to-date) Python = 2.6.6 virtualenv = 1.5.1 gunicorn = 0.12.0 Django = 1.2.5 psycopg2 = '2.4-beta2 (dt dec pq3 ext)' gunicorn configuration : backlog = 2048 bind = "127.0.0.1:8000" pidfile = "/tmp/gunicorn-hc.pid" daemon = True debug = True workers = 3 logfile = "/home/hc/prod/log/gunicorn.log" loglevel = "info" supervisord configuration : [program:gunicorn] directory=/home/hc/prod/hc command=/home/hc/prod/venv/bin/gunicorn_django -c /home/hc/prod/hc/gunicorn.conf.py user=hc umask=022 autostart=True autorestart=True redirect_stderr=True Any advice ? I've been stuck on this one for quite a while. It seems like some weird memory limit, as I'm not enforcing anything special : $ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 20 file size (blocks, -f) unlimited pending signals (-i) 16382 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) unlimited virtual memory (kbytes, -v) unlimited file locks (-x) unlimited Thank you.

    Read the article

  • How to setup ssh's umask for all type of connections

    - by Unode
    I've been searching for a way to setup OpenSSH's umask to 0027 in a consistent way across all connection types. By connection types I'm referring to: sftp scp ssh hostname ssh hostname program The difference between 3. and 4. is that the former starts a shell which usually reads the /etc/profile information while the latter doesn't. In addition by reading this post I've became aware of the -u option that is present in newer versions of OpenSSH. However this doesn't work. I must also add that /etc/profile now includes umask 0027. Going point by point: sftp - Setting -u 0027 in sshd_config as mentioned here, is not enough. If I don't set this parameter, sftp uses by default umask 0022. This means that if I have the two files: -rwxrwxrwx 1 user user 0 2011-01-29 02:04 execute -rw-rw-rw- 1 user user 0 2011-01-29 02:04 read-write When I use sftp to put them in the destination machine I actually get: -rwxr-xr-x 1 user user 0 2011-01-29 02:04 execute -rw-r--r-- 1 user user 0 2011-01-29 02:04 read-write However when I set -u 0027 on sshd_config of the destination machine I actually get: -rwxr--r-- 1 user user 0 2011-01-29 02:04 execute -rw-r--r-- 1 user user 0 2011-01-29 02:04 read-write which is not expected, since it should actually be: -rwxr-x--- 1 user user 0 2011-01-29 02:04 execute -rw-r----- 1 user user 0 2011-01-29 02:04 read-write Anyone understands why this happens? scp - Independently of what is setup for sftp, permissions are always umask 0022. I currently have no idea how to alter this. ssh hostname - no problem here since the shell reads /etc/profile by default which means umask 0027 in the current setup. ssh hostname program - same situation as scp. In sum, setting umask on sftp alters the result but not as it should, ssh hostname works as expected reading /etc/profile and both scp and ssh hostname program seem to have umask 0022 hardcoded somewhere. Any insight on any of the above points is welcome. EDIT: I would like to avoid patches that require manually compiling openssh. The system is running Ubuntu Server 10.04.01 (lucid) LTS with openssh packages from maverick. Answer: As indicated by poige, using pam_umask did the trick. The exact changes were: Lines added to /etc/pam.d/sshd: # Setting UMASK for all ssh based connections (ssh, sftp, scp) session optional pam_umask.so umask=0027 Also, in order to affect all login shells regardless of if they source /etc/profile or not, the same lines were also added to /etc/pam.d/login. EDIT: After some of the comments I retested this issue. At least in Ubuntu (where I tested) it seems that if the user has a different umask set in their shell's init files (.bashrc, .zshrc,...), the PAM umask is ignored and the user defined umask used instead. Changes in /etc/profile did't affect the outcome unless the user explicitly sources those changes in the init files. It is unclear at this point if this behavior happens in all distros.

    Read the article

  • Opening Macro definitions: tdfx_span.c: lvalue required as left operand of assignment

    - by anttir
    Hi, I'm trying to compile X11R6-7.0 under Ubuntu maverick and got some weird compilation errors I'm unable to resolve myself. I needed X11R6-7.0 as ati catalyst drivers don't support newer xorg and oss drivers don't support 3d acceleration of my hardware. Anyone know what this error message means? I know some C but I got a bit confused. Does it mean GET_FB_DATA macro returned NULL or some method/property not set? Any further insight how to "debug" preprocessor definitions at this point would be great. I don't think I can print anything useful with #error. The error I get: tdfx_span.c: In function ‘tdfxDDWriteDepthPixels’: tdfx_span.c:976: error: lvalue required as left operand of assignment tdfx_span.c:1008: error: lvalue required as left operand of assignment tdfx_span.c: In function ‘write_stencil_pixels’: tdfx_span.c:1242: error: lvalue required as left operand of assignment the Code: 958- switch (depth_size) { 959- case 16: 960- GetBackBufferInfo(fxMesa, &backBufferInfo); 961- /* 962- * Note that the _LOCK macro adds a curly brace, 963- * and the UNLOCK macro removes it. 964- */ 965- WRITE_FB_SPAN_LOCK(fxMesa, info, 966- GR_BUFFER_AUXBUFFER, GR_LFBWRITEMODE_ANY); 967- { 968- LFBParameters ReadParams; 969- GetFbParams(fxMesa, &info, &backBufferInfo, 970- &ReadParams, sizeof(GLushort)); 971- for (i = 0; i < n; i++) { 972- if (mask[i] && visible_pixel(fxMesa, x[i], y[i])) { 973- xpos = x[i] + fxMesa->x_offset; 974- ypos = bottom - y[i]; 975- d16 = depth[i]; 976: PUT_FB_DATA(&ReadParams, GLushort, xpos, ypos, d16); 977- } 978- } 979- } 980- WRITE_FB_SPAN_UNLOCK(fxMesa, GR_BUFFER_AUXBUFFER); 981- break; 982- case 24: And relative macros: #define GET_FB_DATA(ReadParamsp, type, x, y) \ (((x) < (ReadParamsp)->firstWrappedX) \ ? (((type *)((ReadParamsp)->lfbPtr)) \ [(y) * ((ReadParamsp)->LFBStrideInElts) \ + (x)]) \ : (((type *)((ReadParamsp)->lfbWrapPtr)) \ [((y)) * ((ReadParamsp)->LFBStrideInElts) \ + ((x) - (ReadParamsp)->firstWrappedX)])) #define GET_ORDINARY_FB_DATA(ReadParamsp, type, x, y) \ (((type *)((ReadParamsp)->lfbPtr)) \ [(y) * ((ReadParamsp)->LFBStrideInElts) \ + (x)]) #define GET_WRAPPED_FB_DATA(ReadParamsp, type, x, y) \ (((type *)((ReadParamsp)->lfbWrapPtr)) \ [((y)) * ((ReadParamsp)->LFBStrideInElts) \ + ((x) - (ReadParamsp)->firstWrappedX)]) #define PUT_FB_DATA(ReadParamsp, type, x, y, value) \ (GET_FB_DATA(ReadParamsp, type, x, y) = (type)(value)) #define PUT_ORDINARY_FB_DATA(ReadParamsp, type, x, y, value) \ (GET_ORDINARY_FB_DATA(ReadParamsp, type, x, y) = (type)(value)) #define PUT_WRAPPED_FB_DATA(ReadParamsp, type, x, y, value) \ (GET_WRAPPED_FB_DATA(ReadParamsp, type, x, y) = (type)(value)) The LFBParameters Struct 483-typedef struct 484-{ 485- void *lfbPtr; 486- void *lfbWrapPtr; 487- FxU32 LFBStrideInElts; 488- GLint firstWrappedX; 489-} 490:LFBParameters; Thanks for looking.

    Read the article

  • Causes of sudden massive filesystem damage? ("root inode is not a directory")

    - by poolie
    I have a laptop running Maverick (very happily until yesterday), with a Patriot Torx SSD; LUKS encryption of the whole partition; one lvm physical volume on top of that; then home and root in ext4 logical volumes on top of that. When I tried to boot it yesterday, it complained that it couldn't mount the root filesystem. Running fsck, basically every inode seems to be wrong. Both home and root filesystems show similar problems. Checking a backup superblock doesn't help. e2fsck 1.41.12 (17-May-2010) lithe_root was not cleanly unmounted, check forced. Resize inode not valid. Recreate? no Pass 1: Checking inodes, blocks, and sizes Root inode is not a directory. Clear? no Root inode has dtime set (probably due to old mke2fs). Fix? no Inode 2 is in use, but has dtime set. Fix? no Inode 2 has a extra size (4730) which is invalid Fix? no Inode 2 has compression flag set on filesystem without compression support. Clear? no Inode 2 has INDEX_FL flag set but is not a directory. Clear HTree index? no HTREE directory inode 2 has an invalid root node. Clear HTree index? no Inode 2, i_size is 9581392125871137995, should be 0. Fix? no Inode 2, i_blocks is 40456527802719, should be 0. Fix? no Reserved inode 3 (<The ACL index inode>) has invalid mode. Clear? no Inode 3 has compression flag set on filesystem without compression support. Clear? no Inode 3 has INDEX_FL flag set but is not a directory. Clear HTree index? no .... Running strings across the filesystems, I can see there are what look like filenames and user data there. I do have sufficiently good backups (touch wood) that it's not worth grovelling around to pull back individual files, though I might save an image of the unencrypted disk before I rebuild, just in case. smartctl doesn't show any errors, neither does the kernel log. Running a write-mode badblocks across the swap lv doesn't find problems either. So the disk may be failing, but not in an obvious way. At this point I'm basically, as they say, fscked? Back to reinstalling, perhaps running badblocks over the disk, then restoring from backup? There doesn't even seem to be enough data to file a meaningful bug... I don't recall that this machine crashed last time I used it. At this point I suspect a bug or memory corruption caused it to write garbage across the disks when it was last running, or some kind of subtle failure mode for the SSD. What do you think would have caused this? Is there anything else you'd try?

    Read the article

  • Why does Akonadi on KDE 4.6.0 refuse to start?

    - by Patches
    Akonadi refuses to start on my fresh installation of KDE 4.6.0 from the kubuntu-backports PPA on Ubuntu 10.10 Maverick Meerkat, preventing me from usking KMail. Here is the full error output: patches@pleistocene:~/.local/share$ akonadictl start Starting Akonadi Server... done. patches@pleistocene:~/.local/share$ Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb772e400] 3: [0xb772e416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6e9f941] 5: /lib/libc.so.6(abort+0x182) [0xb6ea2e42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb74d62dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb757168e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb7581425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb758295d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6e8bce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb77ae400] 3: [0xb77ae416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6f1f941] 5: /lib/libc.so.6(abort+0x182) [0xb6f22e42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb75562dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb75f168e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb7601425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb760295d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6f0bce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb778b400] 3: [0xb778b416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6efc941] 5: /lib/libc.so.6(abort+0x182) [0xb6effe42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb75332dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb75ce68e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb75de425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb75df95d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6ee8ce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb784e400] 3: [0xb784e416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6fbf941] 5: /lib/libc.so.6(abort+0x182) [0xb6fc2e42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb75f62dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb769168e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb76a1425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb76a295d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6fabce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) "akonadiserver" crashed too often and will not be restarted! I tried moving the ~/.local/share/akonadi folder and running it fresh, and I also tried starting Akonadi from a brand new user, all to no avail. Requested by @djeikyb: patches@pleistocene:~$ ls -ld ~/.local drwxrwx--- 3 patches patches 4096 2011-02-07 03:15 /home/patches/.local patches@pleistocene:~$ mysql_upgrade Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) when trying to connect FATAL ERROR: Upgrade failed patches@pleistocene:~$ mysql_upgrade -S ~/.local/share/akonadi/socket-pleistocene/ Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' '--socket=/home/patches/.local/share/akonadi/socket-pleistocene/' mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/home/patches/.local/share/akonadi/socket-pleistocene/' (111) when trying to connect FATAL ERROR: Upgrade failed

    Read the article

  • setting up Ubuntu 10.10 as paravirtualized guest in Xen on RHEL5 host - what kernel?

    - by kostmo
    I've discovered the tool ubuntu-vm-builder, which I've installed and then invoked on an Ubuntu workstation as: sudo vmbuilder xen ubuntu --suite maverick --flavour virtual --arch amd64 --mem=512 --rootsize 8192 This workstation is not the intended target host of the virtual machine, however; I would like to host the guest on a Red Hat Enterprise Linux 5 machine that is running Xen 3.0.3. The output of this command appears to be a folder named ubuntu-xen containing three files: tmpXXXXXX, a very large file which I assume is the root partition image tmpYYYYYY, a somewhat large file which I assume is the swap partition image xen.conf, a text file I have copied the xen.conf file to the RHEL server's /etc/xen directory under the new name newvm, adjusting the paths of tempXXXXXX and tempYYYYYYin the file after also copying them from my local workstation to the RHEL server. When I launch the Virtual Machine Manager virt-manager, I can see the newvm virtual machine listed underneath the Dom0 machine. When I try to start newvm, I get the error: Error starting domain: virDomainCreate() failed POST operation failed: (xend.err 'Error creating domain: Kernel image does not exist: None') Indeed, there exists an entry kernel = 'None' in the xen.conf file. How do I find out what the path of the kernel should be? Is this path supposed to be to a kernel stored on the local filesystem of the RHEL5 host, or is it supposed to be a path inside the guest image? I see that the vmbuilder command provides for a --xen-kernel option, along with a --xen-ramdisk option, but I'm not sure what to use for either. I think I should be able to get this to work, since Ubuntu is said to be supported as a Xen guest, even though the Xen 4.0.1 docs state support for only a limited set of distributions, Ubuntu excluded. Update 1 When running vmbuilder on my local workstation, I did observe an output line saying: Calling hook: install_kernel and later, output lines saying: update-initramfs: Generating /boot/initrd.img-2.6.35-23-virtual [...] run-parts: executing /etc/kernel/postinst.d/initramfs-tools 2.6.35-23-virtual /boot/vmlinuz-2.6.35-23-virtual So in the xen.conf file, I tried setting the lines: kernel = '/boot/vmlinuz-2.6.35-23-virtual' ramdisk = '/boot/initrd.img-2.6.35-23-virtual' When trying to start the VM, I got an error similar to last time: Error starting domain: virDomainCreate() failed POST operation failed: (xend.err 'Error creating domain: Kernel image does not exist: /boot/vmlinuz-2.6.35-23-virtual') This makes me think that the RHEL5 machine is looking for local files, rather than a file within the binary guest disk image. After running sudo updatedb on my workstation, neither of those files were found. If the vmbuilder tool had tried to install them, it must have failed. Update 2 I was able to extract the kernel and initrd images from the guest disk binary by mounting it: mkdir mnt_tmp sudo mount ubuntu-xen/tmpXXXXXX mnt_tmp/ -o loop cp mnt_tmp/boot/vmlinuz-2.6.35-23-virtual virtual_kernel_ubuntu cp mnt_tmp/boot/initrd.img-2.6.35-23-virtual virtual_initrd_ubuntu These two files I copied to the RHEL5 server, and edited the xen.conf file to point to them as kernel and ramdisk. With this done, I could "run" the newvm virtual machine from within virt-manager, but was met with the message Console Not Configured For Guest when I double clicked the entry to open the Virtual Machine Console. As suggested by a forum, I then added the line vfb = [ 'type=vnc' ] to the configuration file, recreated the virtual machine (a ~10 min process), and this time got the message: Connecting to console for guest This remained indefinitely; after selecting View - Serial Console, I found a kernel panic: [5442621.272173] Kernel panic - not syncing: Attempted to kill the idle task! [5442621.272179] Pid: 0, comm: swapper Tainted: G D 2.6.35-23-virtual #41-Ubuntu [5442621.272184] Call Trace: [5442621.272191] [<ffffffff815a1b81>] panic+0x90/0x111 [5442621.272199] [<ffffffff810652ee>] do_exit+0x3be/0x3f0 [5442621.272204] [<ffffffff815a5e20>] oops_end+0xb0/0xf0 [5442621.272211] [<ffffffff8100ddeb>] die+0x5b/0x90 [5442621.272216] [<ffffffff815a56c4>] do_trap+0xc4/0x170 [5442621.272221] [<ffffffff8100ba35>] do_invalid_op+0x95/0xb0 [5442621.272227] [<ffffffff8130851c>] ? intel_idle+0xac/0x180 [5442621.272232] [<ffffffff810072bf>] ? xen_restore_fl_direct_end+0x0/0x1 [5442621.272239] [<ffffffff815a48fe>] ? _raw_spin_unlock_irqrestore+0x1e/0x30 [5442621.272247] [<ffffffff8108dfb7>] ? tick_broadcast_oneshot_control+0xc7/0x120 [5442621.272253] [<ffffffff8100ad5b>] invalid_op+0x1b/0x20 [5442621.272259] [<ffffffff8130851c>] ? intel_idle+0xac/0x180 [5442621.272264] [<ffffffff813084e0>] ? intel_idle+0x70/0x180 [5442621.272269] [<ffffffff810072bf>] ? xen_restore_fl_direct_end+0x0/0x1 [5442621.272275] [<ffffffff8148a147>] cpuidle_idle_call+0xa7/0x140 [5442621.272281] [<ffffffff81008d93>] cpu_idle+0xb3/0x110 [5442621.272286] [<ffffffff815873aa>] rest_init+0x8a/0x90 [5442621.272291] [<ffffffff81b04c9d>] start_kernel+0x387/0x390 [5442621.272297] [<ffffffff81b04341>] x86_64_start_reservations+0x12c/0x130 [5442621.272303] [<ffffffff81b08002>] xen_start_kernel+0x55d/0x561 Update 3 I tried an i386 architecture instead of amd64, but got the same kernel panic. Also, it seems the Virtual Machine Manager pays attention to the format of the filename of the kernel; for the same kernel binary, I tried simply naming it vmlinuz-virtual, which threw out an error box about an invalid kernel. When I named it vmlinuz-2.6.35-23-virtual, it did not throw the error, but it did still result in the kernel panic shortly thereafter.

    Read the article

  • Why does an error appear every time I try to open the Ubuntu Software Center? [duplicate]

    - by askubuntu7639
    This question already has an answer here: How do I remove a broken software source? 3 answers There is a glitch on the Ubuntu Software Center and whenever I open it an error appears and it keeps loading and never opens. Why does this happen? I have installed Ubuntu 13.04 on a disk and partitioned it. Please help me and ask for excess information if you need it. If you know of any duplicates please show me them!! This is the output of a question someone asked me. SystemError: E:Type '<!DOCTYPE' is not known on line 1 in source list /etc/apt/sources.list.d/medibuntu.list This next output is the output of cat /etc/apt/sources.list.d/medibuntu.list </div> <div style="float:left;"> <div class="textwidget"><script type="text/javascript"><!-- google_ad_client = "ca-pub-2917661377128354"; /* 160X600 Sidebar UX */ google_ad_slot = "9908287444"; google_ad_width = 160; google_ad_height = 600; //-- Recent Comments <article> <div style="float:left; display:block; margin:0 10px 10px 0; border:1px solid #CCCCCC; padding:3px; width:35px; height:35px;"><img alt='' src='http://0.gravatar.com/avatar/ae5f4503d5f167f1cf62d3e36e8242b6?s=35&amp;d=&amp;r=G' class='avatar avatar-35 photo' height='35' width='35' /></div> <div style="float:left;"> <h4 class="author">Richard Syme</h4> <p class="meta"> <time datetime="2013-09-24" pubdate>September 24, 2013</time> | <a class="permalink" href="http://www.unixmen.com/how-to-customize-you-vlc-hot-keys/#comment-13732">#</a> </p> </div> <div class="content" style="float:left;"><p>I dont have a clear button under the hotkeys. All i want to do is get rid of all hotkeys.</p> </article> <article> <div style="float:left; display:block; margin:0 10px 10px 0; border:1px solid #CCCCCC; padding:3px; width:35px; height:35px;"><img alt='' src='http://1.gravatar.com/avatar/ffabde94437e996a506e31e981bcf8fc?s=35&amp;d=&amp;r=G' class='avatar avatar-35 photo' height='35' width='35' /></div> <div style="float:left;"> <h4 class="author">Abin Thomas Mathew</h4> <p class="meta"> <time datetime="2013-09-24" pubdate>September 24, 2013</time> | <a class="permalink" href="http://www.unixmen.com/install-lamp-server-in-centos-6-4-rhel-6-4/#comment-13727">#</a> </p> </div> <div class="content" style="float:left;"><p>Simple and easy to follow tutorial to install and start of phpMyAdmin. Thank you</p> </article> <article> <div style="float:left; display:block; margin:0 10px 10px 0; border:1px solid #CCCCCC; padding:3px; width:35px; height:35px;"><img alt='' src='http://0.gravatar.com/avatar/499ccc1154e9b8569b87413434220b91?s=35&amp;d=&amp;r=G' class='avatar avatar-35 photo' height='35' width='35' /></div> <div style="float:left;"> <h4 class="author">SK</h4> <p class="meta"> <time datetime="2013-09-24" pubdate>September 24, 2013</time> | <a class="permalink" href="http://www.unixmen.com/munich-giving-ubuntu-linux-cds-citizens/#comment-13725">#</a> </p> </div> <div class="content" style="float:left;"><p>I have Bosslinux and i used it for a while. Now i swiched to Ubuntu 13.04.</p> </article> <article> <div style="float:left; display:block; margin:0 10px 10px 0; border:1px solid #CCCCCC; padding:3px; width:35px; height:35px;"><img alt='' src='http://1.gravatar.com/avatar/3dc2f7140bdd857dcdfe815a6e29aa6b?s=35&amp;d=&amp;r=G' class='avatar avatar-35 photo' height='35' width='35' /></div> <div style="float:left;"> <h4 class="author">Anon</h4> <p class="meta"> <time datetime="2013-09-24" pubdate>September 24, 2013</time> | <a class="permalink" href="http://www.unixmen.com/linus-torvalds-talks-backdoor-linuxcon/#comment-13724">#</a> </p> </div> <div class="content" style="float:left;"><p>Do you know how much extra bloat is in Ubuntu these days? How the hell does anyone really know?</p> </article> <article> <div style="float:left; display:block; margin:0 10px 10px 0; border:1px solid #CCCCCC; padding:3px; width:35px; height:35px;"><img alt='' src='http://1.gravatar.com/avatar/9dd28d1cf5efe754fa58b53c1e6de401?s=35&amp;d=&amp;r=G' class='avatar avatar-35 photo' height='35' width='35' /></div> <div style="float:left;"> <h4 class="author"><a href="http://ambitiousgeeks.blogspot.com/" onclick="javascript:_gaq.push(['_trackEvent','outbound-commentauthor','http://ambitiousgeeks.blogspot.com']);" rel='external nofollow' class='url'>Ambition</a></h4> <p class="meta"> <time datetime="2013-09-24" pubdate>September 24, 2013</time> | <a class="permalink" href="http://www.unixmen.com/linus-torvalds-talks-backdoor-linuxcon/#comment-13723">#</a> </p> </div> <div class="content" style="float:left;"><p>True :)</p> </article> </div> <div style="float:left;"> &nbsp;<script type="text/javascript"> window.___gcfg = {lang: 'en-US'}; (function() {var po = document.createElement("script"); po.type = "text/javascript"; po.async = true;po.src = "https://apis.google.com/js/plusone.js"; var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(po, s); })(); <div class="execphpwidget"></div> </div> <div class="module2"> <div class="recentPost"> <h3 class="module-title2">Favorite Links</h3> <ul class='xoxo blogroll'> http://www.iticy.com']);"Cheap Hosting http://www.tuxmachines.org']);"TuxMachines.org http://www.ubuntugeek.com']);"UbuntuGeek.com http://www.stelinuxhost.com']);"Webdesign & SEO </ul> <img src="http://180016988.r.cdn77.net/wp-content/themes/unimax/images/bigLine.jpg" alt="" /> </div> </div> <div align="center" style="min-height:610px;"> <div class="execphpwidget"></div> <div class="textwidget"><a rel="license" href="http://creativecommons.org/licenses/by-nc-nd/3.0/deed.en_US" onclick="javascript:_gaq.push(['_trackEvent','outbound-widget','http://creativecommons.org']);"><img alt="Creative Commons License" style="border-width:0" src="http://i.creativecommons.org/l/by-nc-nd/3.0/88x31.png" /></a><br />This work by <a xmlns:cc="http://creativecommons.org/ns#" href="unixmen.com" property="cc:attributionName" rel="cc:attributionURL">unixmen.com</a> is licensed under a <a rel="license" href="http://creativecommons.org/licenses/by-nc-nd/3.0/deed.en_US" >Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License</a>.</div> </div> </div> <!-- #primary .widget-area --> </div> Unixmen Archive Select Month September 2013 August 2013 July 2013 June 2013 May 2013 April 2013 March 2013 February 2013 January 2013 December 2012 November 2012 October 2012 September 2012 August 2012 July 2012 June 2012 May 2012 April 2012 March 2012 February 2012 January 2012 December 2011 November 2011 October 2011 September 2011 August 2011 July 2011 June 2011 May 2011 April 2011 March 2011 February 2011 January 2011 December 2010 November 2010 October 2010 September 2010 August 2010 July 2010 June 2010 May 2010 April 2010 March 2010 February 2010 January 2010 December 2009 November 2009 October 2009 September 2009 August 2009 July 2009 June 2009 May 2009 April 2009 March 2009 February 2009 January 2009 December 2008 Tags Cloudandroid apache browser Centos chrome command line Debian eyecandy Fedora firefox games gaming gnome google karmic koala kde libreoffice Linux linux distribution LinuxMint lucid lynx maverick meerkat mysql news oneiric ocelot openoffice opensource opensuse oracle ppa Precise Pangolin release RHEL security server software themes tools ubuntu unix upgrade virtualbox vlc windows wine Unixmen Twitts Firefox 16, a treat for developers http://t.co/cnd27CzT Ubuntu 12.10 ‘Quantal Quetzal’: Beta 2 Sneak Peek http://t.co/hd4LwDOy Top 5 security Myths about Linux; and their realities http://t.co/zO1LgHST About Us Advertising Sitemap Privacy Contact Us Hire Us Copyright © 2008-2013 Unixmen.com . Maintained by Unixmen . /* */ jQuery(document).on('ready post-load', easy_fancybox_handler ); http://www.w3-edge.com/wordpress-plugins/ Page Caching using apc Database Caching 3/186 queries in 0.035 seconds using apc Content Delivery Network via 180016988.r.cdn77.net Served from: www.unixmen.com @ 2013-09-25 01:38:14 by W3 Total Cache

    Read the article

  • Linux e1000e (Intel networking driver) problems galore, where do I start?

    - by Evan Carroll
    I'm currently having a major problem with e1000e (not working at all) in Ubuntu Maverick (1.0.2-k4), after resume I'm getting a lot of stuff in dmesg: [ 9085.820197] e1000e 0000:02:00.0: PCI INT A disabled [ 9089.907756] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 [ 9089.907762] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 9089.907797] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9089.907827] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9089.907857] e1000e 0000:02:00.0: setting latency timer to 64 [ 9089.908529] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9089.908922] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9089.908954] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9090.024625] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9090.024630] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9090.024712] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005302-003 [ 9090.109492] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9090.164219] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X and, a bunch of [ 2128.005447] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 2128.005452] TDH <89> [ 2128.005454] TDT <27> [ 2128.005456] next_to_use <27> [ 2128.005458] next_to_clean <88> [ 2128.005460] buffer_info[next_to_clean]: [ 2128.005463] time_stamp <6e608> [ 2128.005465] next_to_watch <8a> [ 2128.005467] jiffies <6f929> [ 2128.005469] next_to_watch.status <0> [ 2128.005471] MAC Status <80080703> [ 2128.005473] PHY Status <796d> [ 2128.005475] PHY 1000BASE-T Status <4000> [ 2128.005477] PHY Extended Status <3000> [ 2128.005480] PCI Status <10> I decided to compile the latest stable e1000e to 1.2.17, now I'm getting: [ 9895.678050] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.17-NAPI [ 9895.678055] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9895.678098] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9895.678129] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9895.678162] e1000e 0000:02:00.0: setting latency timer to 64 [ 9895.679136] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.679160] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9895.679192] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9895.791758] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9895.791766] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9895.791850] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9895.892464] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.948175] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.949111] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9895.954694] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9895.954703] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9895.955157] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9906.832056] eth0: no IPv6 routers present With 1.2.20 I get: [ 9711.525465] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI [ 9711.525472] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9711.525521] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9711.525554] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9711.525586] e1000e 0000:02:00.0: setting latency timer to 64 [ 9711.526460] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9711.526487] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9711.526523] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9711.639763] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9711.639771] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9711.639854] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9712.060770] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.116195] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.117098] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9712.122684] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9712.122693] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9712.123142] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9722.920014] eth0: no IPv6 routers present But, I'm still getting these [ 9982.992851] PCI Status <10> [ 9984.993602] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 9984.993606] TDH <5d> [ 9984.993608] TDT <6b> [ 9984.993611] next_to_use <6b> [ 9984.993613] next_to_clean <5b> [ 9984.993615] buffer_info[next_to_clean]: [ 9984.993617] time_stamp <24da80> [ 9984.993619] next_to_watch <5d> [ 9984.993621] jiffies <24f200> [ 9984.993624] next_to_watch.status <0> [ 9984.993626] MAC Status <80080703> [ 9984.993628] PHY Status <796d> [ 9984.993630] PHY 1000BASE-T Status <4000> [ 9984.993632] PHY Extended Status <3000> [ 9984.993635] PCI Status <10> [ 9986.001047] e1000e 0000:02:00.0: eth0: Reset adapter [ 9986.176202] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9986.176211] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO I'm not sure where to start troubleshooting this. Any ideas? Here is the result of ethtool -d eth0 MAC Registers ------------- 0x00000: CTRL (Device control register) 0x18100248 Endian mode (buffers): little Link reset: reset Set link up: 1 Invert Loss-Of-Signal: no Receive flow control: enabled Transmit flow control: enabled VLAN mode: disabled Auto speed detect: disabled Speed select: 1000Mb/s Force speed: no Force duplex: no 0x00008: STATUS (Device status register) 0x80080703 Duplex: full Link up: link config TBI mode: disabled Link speed: 10Mb/s Bus type: PCI Express Port number: 0 0x00100: RCTL (Receive control register) 0x04048002 Receiver: enabled Store bad packets: disabled Unicast promiscuous: disabled Multicast promiscuous: disabled Long packet: disabled Descriptor minimum threshold size: 1/2 Broadcast accept mode: accept VLAN filter: enabled Canonical form indicator: disabled Discard pause frames: filtered Pass MAC control frames: don't pass Receive buffer size: 2048 0x02808: RDLEN (Receive desc length) 0x00001000 0x02810: RDH (Receive desc head) 0x00000001 0x02818: RDT (Receive desc tail) 0x000000F0 0x02820: RDTR (Receive delay timer) 0x00000000 0x00400: TCTL (Transmit ctrl register) 0x3103F0FA Transmitter: enabled Pad short packets: enabled Software XOFF Transmission: disabled Re-transmit on late collision: enabled 0x03808: TDLEN (Transmit desc length) 0x00001000 0x03810: TDH (Transmit desc head) 0x00000000 0x03818: TDT (Transmit desc tail) 0x00000000 0x03820: TIDV (Transmit delay timer) 0x00000008 PHY type: IGP2 and ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 3 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 Here is also the lspci -vvv for this controller 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller Subsystem: Lenovo ThinkPad X60s Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 415a Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number 00-0a-e4-ff-ff-3e-ce-74 Kernel driver in use: e1000e Kernel modules: e1000e I filed a bug on this upstream, still no idea how to get more useful information. Here is a the result of the running that script EEPROM FIX UPDATE $ sudo bash fixeep-82573-dspd.sh eth0 eth0: is a "82573L Gigabit Ethernet Controller" This fixup is applicable to your hardware Your eeprom is up to date, no changes were made Do I still need to do anything? Also here is my EEPROM dump $ sudo ethtool -e eth0 Offset Values ------ ------ 0x0000 00 0a e4 3e ce 74 30 0b b2 ff 51 00 ff ff ff ff 0x0010 53 00 03 02 6b 02 7e 20 aa 17 9a 10 86 80 df 80 0x0020 00 00 00 20 54 7e 00 00 14 00 da 00 04 00 00 27 0x0030 c9 6c 50 31 3e 07 0b 04 8b 29 00 00 00 f0 02 0f 0x0040 08 10 00 00 04 0f ff 7f 01 4d ff ff ff ff ff ff 0x0050 14 00 1d 00 14 00 1d 00 af aa 1e 00 00 00 1d 00 0x0060 00 01 00 40 1f 12 07 40 ff ff ff ff ff ff ff ff 0x0070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 4a e0 I'd also like to note that I used eth0 every day for years and until recently never had an issue.

    Read the article

  • NSOperationQueue bug with dependencies

    - by Daniel
    I am using NSOperation and NSOperationQueue for performing a sequence of operations, all dependent on each other (2 on 1, 3 on 2, etc...). I set the dependency after I create the operations. I am encountering problems when the queue completes: the program crashes in the _release part of the code, apparently when the NSOperations are getting released. Note that they all get released at the end by the queue, because it is only after the very last one which depends on the second last one, which depends on etc... that they can be released. If I remove any dependency, the code runs fine. If I change waitUntilFinished: to NO, it crashes, if it is YES, it does not. I have isolated the problem to the following code which does not use any of my custom classes. NSOperation by default is a class that does absolutely nothing. Yet, this still crashes when all operations have completed. Therefore, it appears I am not using NSOperationQueue properly but can't see what is wrong. I am running on 10.9 and I have noticed that in general Maverick 10.9 is much more sensitive to these issues than 10.8. I call this method from the main Thread with a Menu item: - (void) testOperations:(id)object { NSOperationQueue* queue = [ [ NSOperationQueue alloc ] init ]; NSMutableArray* array = [ NSMutableArray array ]; for ( int i = 0; i < 10000; i++) [ array addObject: [[[ NSOperation alloc ] init ] autorelease ] ]; for ( int i = 1; i < [ array count ]; i++) [[ array objectAtIndex:i ] addDependency:[array objectAtIndex:i-1]]; // remove this and no crash [ queue addOperations: array waitUntilFinished:NO ]; // Change to YES, no crash [ queue autorelease ]; // or release, it does not make a difference, in fact leaking the memory makes no difference: the code crashes when the queue is removing the NSOperations } This will crash every single time with: bool objc::DenseMapBase , objc_object*, unsigned long, objc::DenseMapInfo, true: (EXC_BAD_ACCESS) The full stack is: #0 0x9104d81b in objc::DenseMapBase<objc::DenseMap<objc_object*, unsigned long, true, objc::DenseMapInfo<objc_object*> >, objc_object*, unsigned long, objc::DenseMapInfo<objc_object*>, true>::find(objc_object* const&) () #1 0x910384e3 in _objc_rootReleaseWasZero () #2 0x9104d5d9 in -[NSObject release] () #3 0x99e41224 in CFRelease () #4 0x99e56277 in -[__NSArrayM dealloc] () #5 0x9104d5ef in -[NSObject release] () #6 0x97f62b22 in -[__NSOperationInternal dealloc] () #7 0x9104d5ef in -[NSObject release] () #8 0x97f62ac8 in -[NSOperation dealloc] () #9 0x9104d5ef in -[NSObject release] () #10 0x99e41224 in CFRelease () #11 0x99e56277 in -[__NSArrayM dealloc] () #12 0x9104d5ef in -[NSObject release] () #13 0x97f62b22 in -[__NSOperationInternal dealloc] () #14 0x9104d5ef in -[NSObject release] () #15 0x97f62ac8 in -[NSOperation dealloc] () #16 0x9104d5ef in -[NSObject release] () #17 0x99e41224 in CFRelease () #18 0x99e56277 in -[__NSArrayM dealloc] () #19 0x9104d5ef in -[NSObject release] () #20 0x97f62b22 in -[__NSOperationInternal dealloc] () #21 0x9104d5ef in -[NSObject release] () #22 0x97f62ac8 in -[NSOperation dealloc] () #23 0x9104d5ef in -[NSObject release] () #24 0x99e41224 in CFRelease () #25 0x99e56277 in -[__NSArrayM dealloc] () #26 0x9104d5ef in -[NSObject release] () #27 0x97f62b22 in -[__NSOperationInternal dealloc] () #28 0x9104d5ef in -[NSObject release] () #29 0x97f62ac8 in -[NSOperation dealloc] () #30 0x9104d5ef in -[NSObject release] () #31 0x99e41224 in CFRelease () #32 0x99e56277 in -[__NSArrayM dealloc] () #33 0x9104d5ef in -[NSObject release] () #34 0x97f62b22 in -[__NSOperationInternal dealloc] () #35 0x9104d5ef in -[NSObject release] () #36 0x97f62ac8 in -[NSOperation dealloc] () #37 0x9104d5ef in -[NSObject release] () #38 0x99e41224 in CFRelease () #39 0x99e56277 in -[__NSArrayM dealloc] () #40 0x9104d5ef in -[NSObject release] () #41 0x97f62b22 in -[__NSOperationInternal dealloc] () #42 0x9104d5ef in -[NSObject release] () #43 0x97f62ac8 in -[NSOperation dealloc] () #44 0x9104d5ef in -[NSObject release] () #45 0x99e41224 in CFRelease () #46 0x99e56277 in -[__NSArrayM dealloc] () #47 0x9104d5ef in -[NSObject release] () #48 0x97f62b22 in -[__NSOperationInternal dealloc] () #49 0x9104d5ef in -[NSObject release] () #50 0x97f62ac8 in -[NSOperation dealloc] () #10722 0x9104d5ef in -[NSObject release] () #10723 0x97f62b22 in -[__NSOperationInternal dealloc] () #10724 0x9104d5ef in -[NSObject release] () #10725 0x97f62ac8 in -[NSOperation dealloc] () #10726 0x9104d5ef in -[NSObject release] () #10727 0x99e41224 in CFRelease () #10728 0x99e56277 in -[__NSArrayM dealloc] () #10729 0x9104d5ef in -[NSObject release] () #10730 0x97f62b22 in -[__NSOperationInternal dealloc] () #10731 0x9104d5ef in -[NSObject release] () #10732 0x97f62ac8 in -[NSOperation dealloc] () #10733 0x9104d5ef in -[NSObject release] () #10734 0x99e41224 in CFRelease () #10735 0x99e56277 in -[__NSArrayM dealloc] () #10736 0x9104d5ef in -[NSObject release] () #10737 0x97f62b22 in -[__NSOperationInternal dealloc] () #10738 0x9104d5ef in -[NSObject release] () #10739 0x97f62ac8 in -[NSOperation dealloc] () #10740 0x9104d5ef in -[NSObject release] () #10741 0x99e41224 in CFRelease () #10742 0x99e56277 in -[__NSArrayM dealloc] () #10743 0x9104d5ef in -[NSObject release] () #10744 0x97f62b22 in -[__NSOperationInternal dealloc] () #10745 0x9104d5ef in -[NSObject release] () #10746 0x97f62ac8 in -[NSOperation dealloc] () #10747 0x9104d5ef in -[NSObject release] () #10748 0x99e41224 in CFRelease () #10749 0x99e56277 in -[__NSArrayM dealloc] () #10750 0x9104d5ef in -[NSObject release] () #10751 0x97f62b22 in -[__NSOperationInternal dealloc] () #10752 0x9104d5ef in -[NSObject release] () #10753 0x97f62ac8 in -[NSOperation dealloc] () #10754 0x9104d5ef in -[NSObject release] () #10755 0x99e41224 in CFRelease () #10756 0x99e56277 in -[__NSArrayM dealloc] () #10757 0x9104d5ef in -[NSObject release] () #10758 0x97f62b22 in -[__NSOperationInternal dealloc] () #10759 0x9104d5ef in -[NSObject release] () #10760 0x97f62ac8 in -[NSOperation dealloc] () #10761 0x9104d5ef in -[NSObject release] () #10762 0x99e41224 in CFRelease () #10763 0x99e56277 in -[__NSArrayM dealloc] () #10764 0x9104d5ef in -[NSObject release] () #10765 0x97f62b22 in -[__NSOperationInternal dealloc] () #10766 0x9104d5ef in -[NSObject release] () #10767 0x97f62ac8 in -[NSOperation dealloc] () #10768 0x9104d5ef in -[NSObject release] () #10769 0x99e41224 in CFRelease () #10770 0x99e56277 in -[__NSArrayM dealloc] () #10771 0x9104d5ef in -[NSObject release] () #10772 0x97f62b22 in -[__NSOperationInternal dealloc] () #10773 0x9104d5ef in -[NSObject release] () #10774 0x97f62ac8 in -[NSOperation dealloc] () #10775 0x9104d5ef in -[NSObject release] () #10776 0x99e41224 in CFRelease () #10777 0x99e56277 in -[__NSArrayM dealloc] () #10778 0x9104d5ef in -[NSObject release] () #10779 0x97f62b22 in -[__NSOperationInternal dealloc] () #10780 0x9104d5ef in -[NSObject release] () #10781 0x97f62ac8 in -[NSOperation dealloc] () #10782 0x9104d5ef in -[NSObject release] () #10783 0x99e41224 in CFRelease () #10784 0x99e56277 in -[__NSArrayM dealloc] () #10785 0x9104d5ef in -[NSObject release] () #10786 0x97f62b22 in -[__NSOperationInternal dealloc] () #10787 0x9104d5ef in -[NSObject release] () #10788 0x97f62ac8 in -[NSOperation dealloc] () #10789 0x9104d5ef in -[NSObject release] () #10790 0x99e41224 in CFRelease () #10791 0x99e56277 in -[__NSArrayM dealloc] () #10792 0x9104d5ef in -[NSObject release] () #10793 0x97f62b22 in -[__NSOperationInternal dealloc] () #10794 0x9104d5ef in -[NSObject release] () #10795 0x97f62ac8 in -[NSOperation dealloc] () #10796 0x9104d5ef in -[NSObject release] () #10797 0x99e41224 in CFRelease () #10798 0x99e56277 in -[__NSArrayM dealloc] () #10799 0x9104d5ef in -[NSObject release] () #10800 0x97f62b22 in -[__NSOperationInternal dealloc] () #10801 0x9104d5ef in -[NSObject release] () #10802 0x97f62ac8 in -[NSOperation dealloc] () #10803 0x9104d5ef in -[NSObject release] () #10804 0x99e41224 in CFRelease () #10805 0x99e56277 in -[__NSArrayM dealloc] () #10806 0x9104d5ef in -[NSObject release] () #10807 0x97f62b22 in -[__NSOperationInternal dealloc] () #10808 0x9104d5ef in -[NSObject release] () #10809 0x97f62ac8 in -[NSOperation dealloc] () #10810 0x9104d5ef in -[NSObject release] () #10811 0x99e41224 in CFRelease () #10812 0x99e56277 in -[__NSArrayM dealloc] () #10813 0x9104d5ef in -[NSObject release] () #10814 0x97f62b22 in -[__NSOperationInternal dealloc] () #10815 0x9104d5ef in -[NSObject release] () #10816 0x97f62ac8 in -[NSOperation dealloc] () #10817 0x9104d5ef in -[NSObject release] () #10818 0x99e41224 in CFRelease () #10819 0x99e56277 in -[__NSArrayM dealloc] () #10820 0x9104d5ef in -[NSObject release] () #10821 0x97f62b22 in -[__NSOperationInternal dealloc] () #10822 0x9104d5ef in -[NSObject release] () #10823 0x97f62ac8 in -[NSOperation dealloc] () #10824 0x9104d5ef in -[NSObject release] () #10825 0x99e41224 in CFRelease () #10826 0x99e56277 in -[__NSArrayM dealloc] () #10827 0x9104d5ef in -[NSObject release] () #10828 0x97f62b22 in -[__NSOperationInternal dealloc] () #10829 0x9104d5ef in -[NSObject release] () #10830 0x97f62ac8 in -[NSOperation dealloc] () #10831 0x9104d5ef in -[NSObject release] () #10832 0x99e41224 in CFRelease () #10833 0x99e56277 in -[__NSArrayM dealloc] () #10834 0x9104d5ef in -[NSObject release] () #10835 0x97f62b22 in -[__NSOperationInternal dealloc] () #10836 0x9104d5ef in -[NSObject release] () #10837 0x97f62ac8 in -[NSOperation dealloc] () #10838 0x9104d5ef in -[NSObject release] () #10839 0x99e41224 in CFRelease () #10840 0x99e56277 in -[__NSArrayM dealloc] () #10841 0x9104d5ef in -[NSObject release] () #10842 0x97f62b22 in -[__NSOperationInternal dealloc] () #10843 0x9104d5ef in -[NSObject release] () #10844 0x97f62ac8 in -[NSOperation dealloc] () #10845 0x9104d5ef in -[NSObject release] () #10846 0x99e41224 in CFRelease () #10847 0x99e56277 in -[__NSArrayM dealloc] () #10848 0x9104d5ef in -[NSObject release] () #10849 0x97f62b22 in -[__NSOperationInternal dealloc] () #10850 0x9104d5ef in -[NSObject release] () #10851 0x97f62ac8 in -[NSOperation dealloc] () #10852 0x9104d5ef in -[NSObject release] () #10853 0x99e41224 in CFRelease () #10854 0x99e56277 in -[__NSArrayM dealloc] () #10855 0x9104d5ef in -[NSObject release] () #10856 0x97f62b22 in -[__NSOperationInternal dealloc] () #10857 0x9104d5ef in -[NSObject release] () #10858 0x97f62ac8 in -[NSOperation dealloc] () #10859 0x9104d5ef in -[NSObject release] () #10860 0x99e41224 in CFRelease () #10861 0x99e56277 in -[__NSArrayM dealloc] () #10862 0x9104d5ef in -[NSObject release] () #10863 0x97f62b22 in -[__NSOperationInternal dealloc] () #10864 0x9104d5ef in -[NSObject release] () #10865 0x97f62ac8 in -[NSOperation dealloc] () #10866 0x9104d5ef in -[NSObject release] () #10867 0x99e41224 in CFRelease () #10868 0x99e56277 in -[__NSArrayM dealloc] () #10869 0x9104d5ef in -[NSObject release] () #10870 0x97f62b22 in -[__NSOperationInternal dealloc] () #10871 0x9104d5ef in -[NSObject release] () #10872 0x97f62ac8 in -[NSOperation dealloc] () #10873 0x9104d5ef in -[NSObject release] () #10874 0x99e41224 in CFRelease () #10875 0x99e56277 in -[__NSArrayM dealloc] () #10876 0x9104d5ef in -[NSObject release] () #10877 0x97f62b22 in -[__NSOperationInternal dealloc] () #10878 0x9104d5ef in -[NSObject release] () #10879 0x97f62ac8 in -[NSOperation dealloc] () #10880 0x9104d5ef in -[NSObject release] () #10881 0x99e41224 in CFRelease () #10882 0x99e56277 in -[__NSArrayM dealloc] () #10883 0x9104d5ef in -[NSObject release] () #10884 0x97f62b22 in -[__NSOperationInternal dealloc] () #10885 0x9104d5ef in -[NSObject release] () #10886 0x97f62ac8 in -[NSOperation dealloc] () #10887 0x9104d5ef in -[NSObject release] () #10888 0x99e41224 in CFRelease () #10889 0x99e56277 in -[__NSArrayM dealloc] () #10890 0x9104d5ef in -[NSObject release] () #10891 0x97f62b22 in -[__NSOperationInternal dealloc] () #10892 0x9104d5ef in -[NSObject release] () #10893 0x97f62ac8 in -[NSOperation dealloc] () #10894 0x9104d5ef in -[NSObject release] () #10895 0x99e41224 in CFRelease () #10896 0x99e56277 in -[__NSArrayM dealloc] () #10897 0x9104d5ef in -[NSObject release] () #10898 0x97f62b22 in -[__NSOperationInternal dealloc] () #10899 0x9104d5ef in -[NSObject release] () #10900 0x97f62ac8 in -[NSOperation dealloc] () #10901 0x9104d5ef in -[NSObject release] () #10902 0x99e41224 in CFRelease () #10903 0x99e56277 in -[__NSArrayM dealloc] () #10904 0x9104d5ef in -[NSObject release] () #10905 0x97f62b22 in -[__NSOperationInternal dealloc] () #10906 0x9104d5ef in -[NSObject release] () #10907 0x97f62ac8 in -[NSOperation dealloc] () #10908 0x9104d5ef in -[NSObject release] () #10909 0x99e41224 in CFRelease () #10910 0x99e56277 in -[__NSArrayM dealloc] () #10911 0x9104d5ef in -[NSObject release] () #10912 0x97f62b22 in -[__NSOperationInternal dealloc] () #10913 0x9104d5ef in -[NSObject release] () #10914 0x97f62ac8 in -[NSOperation dealloc] () #10915 0x9104d5ef in -[NSObject release] () #10916 0x97f49cca in __NSOQSchedule_f () #10917 0x9c1c9e21 in _dispatch_async_redirect_invoke () #10918 0x9c1c53a6 in _dispatch_client_callout () #10919 0x9c1c7467 in _dispatch_root_queue_drain () #10920 0x9c1c8732 in _dispatch_worker_thread2 () #10921 0x960c2dab in _pthread_wqthread () The full crash context is (bold for crash line): libobjc.A.dylib`objc::DenseMapBase<objc::DenseMap<objc_object*, unsigned long, true, objc::DenseMapInfo<objc_object*> >, objc_object*, unsigned long, objc::DenseMapInfo<objc_object*>, true>::find(objc_object* const&): 0x9104d800: pushl %ebp 0x9104d801: movl %esp, %ebp 0x9104d803: pushl %esi 0x9104d804: subl $20, %esp 0x9104d807: leal -8(%ebp), %eax 0x9104d80a: movl %eax, 8(%esp) 0x9104d80e: movl 16(%ebp), %eax 0x9104d811: movl %eax, 4(%esp) 0x9104d815: movl 12(%ebp), %esi 0x9104d818: movl %esi, (%esp) **0x9104d81b: calll 0x9104d9b6 ; bool objc::DenseMapBase<objc::DenseMap<objc_object*, unsigned long, true, objc::DenseMapInfo<objc_object*> >, objc_object*, unsigned long, objc::DenseMapInfo<objc_object*>, true>::LookupBucketFor<objc_object*>(objc_object* const&, std::__1::pair<objc_object*, unsigned long> const*&) const** 0x9104d820: movl 12(%esi), %ecx 0x9104d823: shll $3, %ecx 0x9104d826: addl (%esi), %ecx 0x9104d828: movl 8(%ebp), %edx 0x9104d82b: testb %al, %al 0x9104d82d: je 0x9104d836 ; objc::DenseMapBase<objc::DenseMap<objc_object*, unsigned long, true, objc::DenseMapInfo<objc_object*> >, objc_object*, unsigned long, objc::DenseMapInfo<objc_object*>, true>::find(objc_object* const&) + 54 0x9104d82f: movl -8(%ebp), %eax 0x9104d832: movl %eax, (%edx) 0x9104d834: jmp 0x9104d838 ; objc::DenseMapBase<objc::DenseMap<objc_object*, unsigned long, true, objc::DenseMapInfo<objc_object*> >, objc_object*, unsigned long, objc::DenseMapInfo<objc_object*>, true>::find(objc_object* const&) + 56 0x9104d836: movl %ecx, (%edx) 0x9104d838: movl %ecx, 4(%edx) 0x9104d83b: addl $20, %esp 0x9104d83e: popl %esi 0x9104d83f: popl %ebp 0x9104d840: ret $4 0x9104d843: nop I tried using a pre-created queue, this makes no difference. Apparently, with dependencies, this code is a problem with XCode 5.0, 32-bit. Edit: In fact, I can isolate the problem much further. An empty Cocoa Application project in XCOde 5.0 on 10.9 with ARC on and a single method will crash. If it does not on your computer, increase 4269 to anything bigger: - (void)applicationDidFinishLaunching:(NSNotification *)aNotification { NSOperationQueue* aQueue = [[ NSOperationQueue alloc ] init ]; NSMutableArray* array = [ NSMutableArray array ]; for ( int i = 0; i < 4269; i++) [ array addObject: [ [NSOperation alloc ] init ]]; for ( int i = 1; i < [ array count ]; i++) [[ array objectAtIndex:i ] addDependency:[array objectAtIndex:i-1]]; [ aQueue addOperations: array waitUntilFinished:NO ]; }

    Read the article

  • getting SIGSEGV in std::_List_const_iterator<Exiv2::Exifdatum>::operator++ whilst using jni

    - by HJED
    Hi I'm using jni to access the exiv2 API in my Java project and I'm getting a SIGSEGV error in std::_List_const_iterator::operator++. I'm uncertain how to fix this error. I've tried using high -Xmx values as well as running on both jdk1.6.0 (server and cacao JVMs) and 1.7.0 (server JVM). gdb traceback: #0 0x00007fffa36f2363 in std::_List_const_iterator<Exiv2::Exifdatum>::operator++ (this=0x7ffff7fd3500) at /usr/include/c++/4.4/bits/stl_list.h:223 #1 0x00007fffa36f2310 in std::__distance<std::_List_const_iterator<Exiv2::Exifdatum> > (__first=..., __last=...) at /usr/include/c++/4.4/bits/stl_iterator_base_funcs.h:79 #2 0x00007fffa36f224d in std::distance<std::_List_const_iterator<Exiv2::Exifdatum> > (__first=..., __last=...) at /usr/include/c++/4.4/bits/stl_iterator_base_funcs.h:114 #3 0x00007fffa36f1f27 in std::list<Exiv2::Exifdatum, std::allocator<Exiv2::Exifdatum> >::size (this=0x7fffa4030910) at /usr/include/c++/4.4/bits/stl_list.h:805 #4 0x00007fffa36f1d50 in Exiv2::ExifData::count (this=0x7fffa4030910) at /usr/local/include/exiv2/exif.hpp:518 #5 0x00007fffa36f1d30 in Exiv2::ExifData::empty (this=0x7fffa4030910) at /usr/local/include/exiv2/exif.hpp:516 #6 0x00007fffa36f1763 in getVars (path=0x7fffa401d2f0 "/home/hjed/PC100001.JPG", env=0x6131c8, obj=0x7ffff7fd37a8) at src/main.cpp:146 #7 0x00007fffa36f19d8 in Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv (env=0x6131c8, obj=0x7ffff7fd37a8, path=0x7ffff7fd37a0, obj2=0x7ffff7fd3798) at src/main.cpp:160 #8 0x00007ffff21d9cc8 in ?? () #9 0x00000000fffffffe in ?? () #10 0x00007ffff7fd3740 in ?? () #11 0x0000000000613000 in ?? () #12 0x00007ffff7fd3738 in ?? () #13 0x00007fffaa1076e0 in ?? () #14 0x00007ffff7fd37a8 in ?? () #15 0x00007fffaa108d10 in ?? () #16 0x0000000000000000 in ?? () Java error: # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007fac11223363, pid=11905, tid=140378349111040 # # JRE version: 6.0_20-b20 # Java VM: OpenJDK 64-Bit Server VM (19.0-b09 mixed mode linux-amd64 ) # Derivative: IcedTea6 1.9.2 # Distribution: Ubuntu 10.10, package 6b20-1.9.2-0ubuntu2 # Problematic frame: # C [libExiff2-binding.so+0x4363] _ZNSt20_List_const_iteratorIN5Exiv29ExifdatumEEppEv+0xf # # If you would like to submit a bug report, please include # instructions how to reproduce the bug and visit: # https://bugs.launchpad.net/ubuntu/+source/openjdk-6/ # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # --------------- T H R E A D --------------- Current thread (0x0000000000dbf000): JavaThread "main" [_thread_in_native, id=11909, stack(0x00007fac61920000,0x00007fac61a21000)] siginfo:si_signo=SIGSEGV: si_errno=0, si_code=128 (), si_addr=0x0000000000000000 Registers: ... Register to memory mapping: RAX=0x6c8948f0245c8948 0x6c8948f0245c8948 is pointing to unknown location RBX=0x00007fac0c042c00 0x00007fac0c042c00 is pointing to unknown location RCX=0x0000000000000000 0x0000000000000000 is pointing to unknown location RDX=0x6c8948f0245c8948 0x6c8948f0245c8948 is pointing to unknown location RSP=0x00007fac61a1f4e0 0x00007fac61a1f4e0 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE RBP=0x00007fac61a1f4e0 0x00007fac61a1f4e0 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE RSI=0x00007fac61a1f4f0 0x00007fac61a1f4f0 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE RDI=0x00007fac61a1f500 0x00007fac61a1f500 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE R8 =0x00007fac0c054630 0x00007fac0c054630 is pointing to unknown location R9 =0x00007fac61a1f358 0x00007fac61a1f358 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE R10=0x00007fac61a1f270 0x00007fac61a1f270 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE R11=0x00007fac11223354 0x00007fac11223354: _ZNSt20_List_const_iteratorIN5Exiv29ExifdatumEEppEv+0 in /home/hjed/libExiff2-binding.so at 0x00007fac1121f000 R12=0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE R13=0x00007fac13ad1be8 {method} - klass: {other class} R14=0x00007fac61a1f7a8 0x00007fac61a1f7a8 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE R15=0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE Top of Stack: (sp=0x00007fac61a1f4e0) ... Instructions: (pc=0x00007fac11223363) ... Stack: [0x00007fac61920000,0x00007fac61a21000], sp=0x00007fac61a1f4e0, free space=1021k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) C [libExiff2-binding.so+0x4363] _ZNSt20_List_const_iteratorIN5Exiv29ExifdatumEEppEv+0xf C [libExiff2-binding.so+0x4310] _ZSt10__distanceISt20_List_const_iteratorIN5Exiv29ExifdatumEEENSt15iterator_traitsIT_E15difference_typeES5_S5_St18input_iterator_tag+0x26 C [libExiff2-binding.so+0x424d] _ZSt8distanceISt20_List_const_iteratorIN5Exiv29ExifdatumEEENSt15iterator_traitsIT_E15difference_typeES5_S5_+0x36 C [libExiff2-binding.so+0x3f27] _ZNKSt4listIN5Exiv29ExifdatumESaIS1_EE4sizeEv+0x33 C [libExiff2-binding.so+0x3d50] _ZNK5Exiv28ExifData5countEv+0x18 C [libExiff2-binding.so+0x3d30] _ZNK5Exiv28ExifData5emptyEv+0x18 C [libExiff2-binding.so+0x3763] _Z7getVarsPKcP7JNIEnv_P8_jobject+0x3e3 C [libExiff2-binding.so+0x39d8] Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv+0x4b j photo.exiv2.Exiv2MetaDataStore.impl_loadFromExiv(Ljava/lang/String;Lphoto/exiv2/Exiv2MetaDataStore;)V+0 j photo.exiv2.Exiv2MetaDataStore.loadFromExiv2()V+9 j photo.exiv2.Exiv2MetaDataStore.loadData()V+1 j photo.exiv2.Exiv2MetaDataStore.<init>(Lphoto/ImageFile;)V+10 j photo.ImageFile.<init>(Ljava/lang/String;)V+11 j test.Main.main([Ljava/lang/String;)V+67 v ~StubRoutines::call_stub V [libjvm.so+0x428698] V [libjvm.so+0x4275c8] V [libjvm.so+0x432943] V [libjvm.so+0x447f91] C [java+0x3495] JavaMain+0xd75 Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j photo.exiv2.Exiv2MetaDataStore.impl_loadFromExiv(Ljava/lang/String;Lphoto/exiv2/Exiv2MetaDataStore;)V+0 j photo.exiv2.Exiv2MetaDataStore.loadFromExiv2()V+9 j photo.exiv2.Exiv2MetaDataStore.loadData()V+1 j photo.exiv2.Exiv2MetaDataStore.<init>(Lphoto/ImageFile;)V+10 j photo.ImageFile.<init>(Ljava/lang/String;)V+11 j test.Main.main([Ljava/lang/String;)V+67 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( => current thread ) 0x00007fac0c028000 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=11924, stack(0x00007fac11532000,0x00007fac11633000)] 0x00007fac0c025800 JavaThread "CompilerThread1" daemon [_thread_blocked, id=11923, stack(0x00007fac11633000,0x00007fac11734000)] 0x00007fac0c022000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=11922, stack(0x00007fac11734000,0x00007fac11835000)] 0x00007fac0c01f800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=11921, stack(0x00007fac11835000,0x00007fac11936000)] 0x00007fac0c001000 JavaThread "Finalizer" daemon [_thread_blocked, id=11920, stack(0x00007fac11e2d000,0x00007fac11f2e000)] 0x0000000000e36000 JavaThread "Reference Handler" daemon [_thread_blocked, id=11919, stack(0x00007fac11f2e000,0x00007fac1202f000)] =>0x0000000000dbf000 JavaThread "main" [_thread_in_native, id=11909, stack(0x00007fac61920000,0x00007fac61a21000)] Other Threads: 0x0000000000e2f800 VMThread [stack: 0x00007fac1202f000,0x00007fac12130000] [id=11918] 0x00007fac0c02b000 WatcherThread [stack: 0x00007fac11431000,0x00007fac11532000] [id=11925] ... Heap PSYoungGen total 18432K, used 632K [0x00007fac47210000, 0x00007fac486a0000, 0x00007fac5bc10000) eden space 15808K, 4% used [0x00007fac47210000,0x00007fac472ae188,0x00007fac48180000) from space 2624K, 0% used [0x00007fac48410000,0x00007fac48410000,0x00007fac486a0000) to space 2624K, 0% used [0x00007fac48180000,0x00007fac48180000,0x00007fac48410000) PSOldGen total 42240K, used 0K [0x00007fac1de10000, 0x00007fac20750000, 0x00007fac47210000) object space 42240K, 0% used [0x00007fac1de10000,0x00007fac1de10000,0x00007fac20750000) PSPermGen total 21248K, used 2831K [0x00007fac13810000, 0x00007fac14cd0000, 0x00007fac1de10000) object space 21248K, 13% used [0x00007fac13810000,0x00007fac13ad3d80,0x00007fac14cd0000) Dynamic libraries: ... VM Arguments: jvm_args: -Dfile.encoding=UTF-8 java_command: test.Main Launcher Type: SUN_STANDARD Environment Variables: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games USERNAME=hjed LD_LIBRARY_PATH=/usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server:/usr/lib/jvm/java-6-openjdk/jre/lib/amd64:/usr/lib/jvm/java-6-openjdk/jre/../lib/amd64 SHELL=/bin/bash DISPLAY=:0.0 Signal Handlers: ... --------------- S Y S T E M --------------- OS:Ubuntu 10.10 (maverick) uname:Linux 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 libc:glibc 2.12.1 NPTL 2.12.1 rlimit: STACK 8192k, CORE 0k, NPROC infinity, NOFILE 1024, AS infinity load average:0.27 0.31 0.30 /proc/meminfo: MemTotal: 4048200 kB MemFree: 106552 kB Buffers: 838212 kB Cached: 1172496 kB SwapCached: 0 kB Active: 1801316 kB Inactive: 1774880 kB Active(anon): 1224708 kB Inactive(anon): 355012 kB Active(file): 576608 kB Inactive(file): 1419868 kB Unevictable: 64 kB Mlocked: 64 kB SwapTotal: 7065596 kB SwapFree: 7065596 kB Dirty: 20 kB Writeback: 0 kB AnonPages: 1565608 kB Mapped: 213424 kB Shmem: 14216 kB Slab: 164812 kB SReclaimable: 102576 kB SUnreclaim: 62236 kB KernelStack: 4784 kB PageTables: 44908 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 9089696 kB Committed_AS: 3676872 kB VmallocTotal: 34359738367 kB VmallocUsed: 332952 kB VmallocChunk: 34359397884 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 48704 kB DirectMap2M: 4136960 kB CPU:total 8 (4 cores per cpu, 2 threads per core) family 6 model 26 stepping 5, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, popcnt, ht Memory: 4k page, physical 4048200k(106552k free), swap 7065596k(7065596k free) vm_info: OpenJDK 64-Bit Server VM (19.0-b09) for linux-amd64 JRE (1.6.0_20-b20), built on Dec 10 2010 19:45:55 by "buildd" with gcc 4.4.5 main.cpp: jobject toJava(std::auto_ptr<Exiv2::Value> v, const char * type, JNIEnv * env) { jclass stringClass; jmethodID cid; jobject result; stringClass = env->FindClass("photo/exiv2/Value"); cid = env->GetMethodID(stringClass, "<init>", "(Ljava/lang/String;Ljava/lang/Object;)V"); jvalue val; if ((strcmp(type, "String") == 0) || (strcmp(type, "String") == 0)) { val.l = env->NewStringUTF(v->toString().c_str()); } else if (strcmp(type, "Short") == 0) { val.s = v->toLong(0); } else if (strcmp(type, "Long") == 0) { val.j = v->toLong(0); } result = env->NewObject(stringClass, cid, env->NewStringUTF(v->toString().c_str()), val); return result; } void inLoop(std::auto_ptr<MetadataContainer> md, JNIEnv * env, jmethodID mid, jobject obj) { jvalue values[2]; const char* key = md->key().c_str(); values[0].l = env->NewStringUTF(key); /** md->value().toString().c_str(); const char* value = md->typeName(); values[1].l = env->NewStringUTF(value); TODO: do type conversions */ //std::cout << md->typeName() << std::endl; /** const char* type = md->value().toString().c_str(); values[1].l = env->NewStringUTF(type);*/ values[1].l = toJava(md->getValue(), md->typeName(), env); env->CallVoidMethodA(obj, mid, values); } void getVars(const char* path, JNIEnv * env, jobject obj) { //Load image Exiv2::Image::AutoPtr image = Exiv2::ImageFactory::open(path); assert(image.get() != 0); image->readMetadata(); //load method jclass cls = env->GetObjectClass(obj); jmethodID mid = env->GetMethodID(cls, "exiv2_reciveElement", "(Ljava/lang/String;Lphoto/exiv2/Value;)V"); //Load IPTC data /**loadIPTC(image, path, env, obj, mid); loadEXIF(image, path, env, obj, mid);*/ Exiv2::IptcData &iptcData = image->iptcData(); if (mid != NULL) { //is there any IPTC data AND check that method exists if (iptcData.empty()) { std::string error(path); error += ": failed loading IPTC data, there may not be any data"; } else { Exiv2::IptcData::iterator end = iptcData.end(); for (Exiv2::IptcData::iterator md = iptcData.begin(); md != end; ++md) { std::auto_ptr<MetadataContainer> meta(new MetadataContainer(md)); inLoop(meta, env, mid, obj); } } Exiv2::ExifData &exifData = image->exifData(); //is there any Exif data AND check that method exists if (exifData.empty()) { //error occurs here (main.cpp:146) std::string error(path); error += ": failed loading Exif data, there may not be any data"; } else { Exiv2::ExifData::iterator end = exifData.end(); for (Exiv2::ExifData::iterator md = exifData.begin(); md != end; ++md) { std::auto_ptr<MetadataContainer> meta(new MetadataContainer(md)); inLoop(meta, env, mid, obj); } } } else { std::string error(path); error += ": failed to load method"; } } JNIEXPORT void JNICALL Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv(JNIEnv * env, jobject obj, jstring path, jobject obj2) { const char* path2 = env->GetStringUTFChars(path, NULL); getVars(path2, env, obj); env->ReleaseStringUTFChars(path, path2); } Thanks for any help, HJED EDIT This is the output when runing the jvm with the -cacao option: run: null:/usr/local/lib Error: Directory Olympus2 with 1536 entries considered invalid; not read. LOG: [0x00007ff005376700] We received a SIGSEGV and tried to handle it, but we were LOG: [0x00007ff005376700] unable to find a Java method at: LOG: [0x00007ff005376700] LOG: [0x00007ff005376700] PC=0x00007feffe4ee67d LOG: [0x00007ff005376700] LOG: [0x00007ff005376700] Dumping the current stacktrace: at photo.exiv2.Exiv2MetaDataStore.impl_loadFromExiv(Ljava/lang/String;Lphoto/exiv2/Exiv2MetaDataStore;)V(Native Method) at photo.exiv2.Exiv2MetaDataStore.loadFromExiv2()V(Exiv2MetaDataStore.java:38) at photo.exiv2.Exiv2MetaDataStore.loadData()V(Exiv2MetaDataStore.java:29) at photo.exiv2.MetaDataStore.<init>(Lphoto/ImageFile;)V(MetaDataStore.java:33) at photo.exiv2.Exiv2MetaDataStore.<init>(Lphoto/ImageFile;)V(Exiv2MetaDataStore.java:20) at photo.ImageFile.<init>(Ljava/lang/String;)V(ImageFile.java:22) at test.Main.main([Ljava/lang/String;)V(Main.java:28) LOG: [0x00007ff005376700] vm_abort: WARNING, port me to C++ and use os::abort() instead. LOG: [0x00007ff005376700] Exiting... LOG: [0x00007ff005376700] Backtrace (15 stack frames): LOG: [0x00007ff005376700] /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/cacao/libjvm.so(+0x4ff54) [0x7ff004306f54] LOG: [0x00007ff005376700] /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/cacao/libjvm.so(+0x5ac01) [0x7ff004311c01] LOG: [0x00007ff005376700] /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/cacao/libjvm.so(+0x66e9a) [0x7ff00431de9a] LOG: [0x00007ff005376700] /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/cacao/libjvm.so(+0x76408) [0x7ff00432d408] LOG: [0x00007ff005376700] /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/cacao/libjvm.so(+0x79a4c) [0x7ff004330a4c] LOG: [0x00007ff005376700] /lib/libpthread.so.0(+0xfb40) [0x7ff004d53b40] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZNSt20_List_const_iteratorIN5Exiv29ExifdatumEEppEv+0xf) [0x7feffe4ee67d] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZSt10__distanceISt20_List_const_iteratorIN5Exiv29ExifdatumEEENSt15iterator_traitsIT_E15difference_typeES5_S5_St18input_iterator_tag+0x26) [0x7feffe4ee62a] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZSt8distanceISt20_List_const_iteratorIN5Exiv29ExifdatumEEENSt15iterator_traitsIT_E15difference_typeES5_S5_+0x36) [0x7feffe4ee567] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZNKSt4listIN5Exiv29ExifdatumESaIS1_EE4sizeEv+0x33) [0x7feffe4ee22b] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZNK5Exiv28ExifData5countEv+0x18) [0x7feffe4ee054] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZNK5Exiv28ExifData5emptyEv+0x18) [0x7feffe4ee034] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_Z7getVarsPKcP7JNIEnv_P8_jobject+0x3d7) [0x7feffe4ed947] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv+0x4b) [0x7feffe4edcdc] LOG: [0x00007ff005376700] [0x7feffe701ccd] Java Result: 134 BUILD SUCCESSFUL (total time: 0 seconds)

    Read the article

  • JNI 'problmatic frame' causes JVM to crash

    - by HJED
    Hi I'm using JNI to access the exiv2 library (written in C++) in Java and I'm getting a weird runtime error in the JNI code. I've tried using various -Xms and -Xmx options, but that seems to have no affect. I've also tried running this code on JDK1.7.0 with the same result. # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007ff31807757f, pid=4041, tid=140682078746368 # # JRE version: 6.0_20-b20 # Java VM: OpenJDK 64-Bit Server VM (19.0-b09 mixed mode linux-amd64 ) # Derivative: IcedTea6 1.9.2 # Distribution: Ubuntu 10.10, package 6b20-1.9.2-0ubuntu2 # Problematic frame: # V [libjvm.so+0x42757f] # # If you would like to submit a bug report, please include # instructions how to reproduce the bug and visit: # https://bugs.launchpad.net/ubuntu/+source/openjdk-6/ # --------------- T H R E A D --------------- Current thread (0x000000000190d000): JavaThread "main" [_thread_in_Java, id=4043, stack(0x00007ff319447000,0x00007ff319548000)] siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0x0000000000000024 Registers: ... Register to memory mapping: RAX=0x0000000000000002 0x0000000000000002 is pointing to unknown location RBX=0x000000000190db90 0x000000000190db90 is pointing to unknown location RCX=0x0000000000000000 0x0000000000000000 is pointing to unknown location RDX=0x00007ff3195463f8 0x00007ff3195463f8 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE RSP=0x00007ff319546270 0x00007ff319546270 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE RBP=0x00007ff319546270 0x00007ff319546270 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE RSI=0x0000000000000024 0x0000000000000024 is pointing to unknown location RDI=0x00007ff3195463e0 0x00007ff3195463e0 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R8 =0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R9 =0x000000000190db88 0x000000000190db88 is pointing to unknown location R10=0x00007ff319546300 0x00007ff319546300 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R11=0x0000000000000002 0x0000000000000002 is pointing to unknown location R12=0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R13=0x00007ff319546560 0x00007ff319546560 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R14=0x00007ff3195463e0 0x00007ff3195463e0 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R15=0x0000000000000003 0x0000000000000003 is pointing to unknown location Top of Stack: (sp=0x00007ff319546270) ... Instructions: (pc=0x00007ff31807757f) 0x00007ff31807756f: e2 03 48 03 57 58 31 c9 48 8b 32 48 85 f6 74 03 0x00007ff31807757f: 48 8b 0e 48 89 0a 8b 77 68 83 c0 01 39 f0 7c d1 Stack: [0x00007ff319447000,0x00007ff319548000], sp=0x00007ff319546270, free space=1020k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) V [libjvm.so+0x42757f] V [libjvm.so+0x42866b] V [libjvm.so+0x4275c8] V [libjvm.so+0x4331bd] V [libjvm.so+0x44e5c7] C [libExiff2-binding.so+0x1f16] _ZN7JNIEnv_15CallVoidMethodAEP8_jobjectP10_jmethodIDPK6jvalue+0x40 C [libExiff2-binding.so+0x1b96] _Z8loadIPTCSt8auto_ptrIN5Exiv25ImageEEPKcP7JNIEnv_P8_jobject+0x2ba C [libExiff2-binding.so+0x1d3f] _Z7getVarsPKcP7JNIEnv_P8_jobject+0x176 C [libExiff2-binding.so+0x1de7] Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv+0x4b j photo.exiv2.Exiv2MetaDataStore.impl_loadFromExiv(Ljava/lang/String;Lphoto/exiv2/Exiv2MetaDataStore;)V+0 j photo.exiv2.Exiv2MetaDataStore.loadFromExiv2()V+9 j photo.exiv2.Exiv2MetaDataStore.loadData()V+1 j photo.exiv2.Exiv2MetaDataStore.<init>(Lphoto/ImageFile;)V+10 j test.Main.main([Ljava/lang/String;)V+76 v ~StubRoutines::call_stub V [libjvm.so+0x428698] V [libjvm.so+0x4275c8] V [libjvm.so+0x432943] V [libjvm.so+0x447f91] C [java+0x3495] JavaMain+0xd75 --------------- P R O C E S S --------------- Java Threads: ( => current thread ) 0x00007ff2c4027800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=4060, stack(0x00007ff2c9052000,0x00007ff2c9153000)] 0x00007ff2c4025000 JavaThread "CompilerThread1" daemon [_thread_blocked, id=4059, stack(0x00007ff2c9153000,0x00007ff2c9254000)] 0x00007ff2c4022000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=4058, stack(0x00007ff2c9254000,0x00007ff2c9355000)] 0x00007ff2c401f800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=4057, stack(0x00007ff2c9355000,0x00007ff2c9456000)] 0x00007ff2c4001000 JavaThread "Finalizer" daemon [_thread_blocked, id=4056, stack(0x00007ff2c994d000,0x00007ff2c9a4e000)] 0x0000000001984000 JavaThread "Reference Handler" daemon [_thread_blocked, id=4055, stack(0x00007ff2c9a4e000,0x00007ff2c9b4f000)] =>0x000000000190d000 JavaThread "main" [_thread_in_Java, id=4043, stack(0x00007ff319447000,0x00007ff319548000)] Other Threads: 0x000000000197d800 VMThread [stack: 0x00007ff2c9b4f000,0x00007ff2c9c50000] [id=4054] 0x00007ff2c4032000 WatcherThread [stack: 0x00007ff2c8f51000,0x00007ff2c9052000] [id=4061] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap PSYoungGen total 18432K, used 316K [0x00007ff2fed30000, 0x00007ff3001c0000, 0x00007ff313730000) eden space 15808K, 2% used [0x00007ff2fed30000,0x00007ff2fed7f0b8,0x00007ff2ffca0000) from space 2624K, 0% used [0x00007ff2fff30000,0x00007ff2fff30000,0x00007ff3001c0000) to space 2624K, 0% used [0x00007ff2ffca0000,0x00007ff2ffca0000,0x00007ff2fff30000) PSOldGen total 42240K, used 0K [0x00007ff2d5930000, 0x00007ff2d8270000, 0x00007ff2fed30000) object space 42240K, 0% used [0x00007ff2d5930000,0x00007ff2d5930000,0x00007ff2d8270000) PSPermGen total 21248K, used 2827K [0x00007ff2cb330000, 0x00007ff2cc7f0000, 0x00007ff2d5930000) object space 21248K, 13% used [0x00007ff2cb330000,0x00007ff2cb5f2f60,0x00007ff2cc7f0000) Dynamic libraries: 00400000-00409000 r-xp 00000000 08:03 141899 /usr/lib/jvm/java-6-openjdk/jre/bin/java 00608000-00609000 r--p 00008000 08:03 141899 /usr/lib/jvm/java-6-openjdk/jre/bin/java 00609000-0060a000 rw-p 00009000 08:03 141899 /usr/lib/jvm/java-6-openjdk/jre/bin/java 01904000-019ad000 rw-p 00000000 00:00 0 [heap] ... 7ff2c820c000-7ff2c8232000 r-xp 00000000 08:03 917704 /lib/libexpat.so.1.5.2 7ff2c8232000-7ff2c8432000 ---p 00026000 08:03 917704 /lib/libexpat.so.1.5.2 7ff2c8432000-7ff2c8434000 r--p 00026000 08:03 917704 /lib/libexpat.so.1.5.2 7ff2c8434000-7ff2c8435000 rw-p 00028000 08:03 917704 /lib/libexpat.so.1.5.2 7ff2c8435000-7ff2c844a000 r-xp 00000000 08:03 917708 /lib/libgcc_s.so.1 7ff2c844a000-7ff2c8649000 ---p 00015000 08:03 917708 /lib/libgcc_s.so.1 7ff2c8649000-7ff2c864a000 r--p 00014000 08:03 917708 /lib/libgcc_s.so.1 7ff2c864a000-7ff2c864b000 rw-p 00015000 08:03 917708 /lib/libgcc_s.so.1 7ff2c864b000-7ff2c8733000 r-xp 00000000 08:03 134995 /usr/lib/libstdc++.so.6.0.14 7ff2c8733000-7ff2c8932000 ---p 000e8000 08:03 134995 /usr/lib/libstdc++.so.6.0.14 7ff2c8932000-7ff2c893a000 r--p 000e7000 08:03 134995 /usr/lib/libstdc++.so.6.0.14 7ff2c893a000-7ff2c893c000 rw-p 000ef000 08:03 134995 /usr/lib/libstdc++.so.6.0.14 7ff2c893c000-7ff2c8951000 rw-p 00000000 00:00 0 7ff2c8951000-7ff2c8af3000 r-xp 00000000 08:03 134599 /usr/lib/libexiv2.so.6.0.0 7ff2c8af3000-7ff2c8cf2000 ---p 001a2000 08:03 134599 /usr/lib/libexiv2.so.6.0.0 7ff2c8cf2000-7ff2c8d0f000 r--p 001a1000 08:03 134599 /usr/lib/libexiv2.so.6.0.0 7ff2c8d0f000-7ff2c8d10000 rw-p 001be000 08:03 134599 /usr/lib/libexiv2.so.6.0.0 7ff2c8d10000-7ff2c8d23000 rw-p 00000000 00:00 0 7ff2c8d42000-7ff2c8d45000 r-xp 00000000 08:03 800718 /home/hjed/libExiff2-binding.so 7ff2c8d45000-7ff2c8f44000 ---p 00003000 08:03 800718 /home/hjed/libExiff2-binding.so 7ff2c8f44000-7ff2c8f45000 r--p 00002000 08:03 800718 /home/hjed/libExiff2-binding.so 7ff2c8f45000-7ff2c8f46000 rw-p 00003000 08:03 800718 /home/hjed/libExiff2-binding.so 7ff2c8f46000-7ff2c8f49000 r--s 0000f000 08:03 141333 /usr/lib/jvm/java-6-openjdk/jre/lib/ext/pulse-java.jar 7ff2c8f49000-7ff2c8f51000 r--s 00066000 08:03 408472 /usr/share/java/gnome-java-bridge.jar ... 7ff2ca559000-7ff2ca55b000 r--s 0001d000 08:03 141354 /usr/lib/jvm/java-6-openjdk/jre/lib/plugin.jar 7ff2ca55b000-7ff2ca560000 r--s 00044000 08:03 141353 /usr/lib/jvm/java-6-openjdk/jre/lib/netx.jar 7ff2ca560000-7ff2ca592000 rw-p 00000000 00:00 0 7ff2ca592000-7ff2ca720000 r--s 038af000 08:03 141833 /usr/lib/jvm/java-6-openjdk/jre/lib/rt.jar ... 7ff31673b000-7ff316742000 r-xp 00000000 08:03 141867 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libzip.so 7ff316742000-7ff316941000 ---p 00007000 08:03 141867 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libzip.so 7ff316941000-7ff316942000 r--p 00006000 08:03 141867 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libzip.so 7ff316942000-7ff316943000 rw-p 00007000 08:03 141867 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libzip.so 7ff316943000-7ff31694f000 r-xp 00000000 08:03 921396 /lib/libnss_files-2.12.1.so 7ff31694f000-7ff316b4e000 ---p 0000c000 08:03 921396 /lib/libnss_files-2.12.1.so 7ff316b4e000-7ff316b4f000 r--p 0000b000 08:03 921396 /lib/libnss_files-2.12.1.so 7ff316b4f000-7ff316b50000 rw-p 0000c000 08:03 921396 /lib/libnss_files-2.12.1.so 7ff316b50000-7ff316b5a000 r-xp 00000000 08:03 921398 /lib/libnss_nis-2.12.1.so 7ff316b5a000-7ff316d59000 ---p 0000a000 08:03 921398 /lib/libnss_nis-2.12.1.so 7ff316d59000-7ff316d5a000 r--p 00009000 08:03 921398 /lib/libnss_nis-2.12.1.so 7ff316d5a000-7ff316d5b000 rw-p 0000a000 08:03 921398 /lib/libnss_nis-2.12.1.so 7ff316d5b000-7ff316d63000 r-xp 00000000 08:03 921393 /lib/libnss_compat-2.12.1.so 7ff316d63000-7ff316f62000 ---p 00008000 08:03 921393 /lib/libnss_compat-2.12.1.so 7ff316f62000-7ff316f63000 r--p 00007000 08:03 921393 /lib/libnss_compat-2.12.1.so 7ff316f63000-7ff316f64000 rw-p 00008000 08:03 921393 /lib/libnss_compat-2.12.1.so 7ff316f64000-7ff316f6c000 r-xp 00000000 08:03 141869 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/native_threads/libhpi.so 7ff316f6c000-7ff31716b000 ---p 00008000 08:03 141869 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/native_threads/libhpi.so 7ff31716b000-7ff31716c000 r--p 00007000 08:03 141869 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/native_threads/libhpi.so 7ff31716c000-7ff31716d000 rw-p 00008000 08:03 141869 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/native_threads/libhpi.so 7ff31716d000-7ff317184000 r-xp 00000000 08:03 921392 /lib/libnsl-2.12.1.so 7ff317184000-7ff317383000 ---p 00017000 08:03 921392 /lib/libnsl-2.12.1.so 7ff317383000-7ff317384000 r--p 00016000 08:03 921392 /lib/libnsl-2.12.1.so 7ff317384000-7ff317385000 rw-p 00017000 08:03 921392 /lib/libnsl-2.12.1.so 7ff317385000-7ff317387000 rw-p 00000000 00:00 0 7ff317387000-7ff3173b2000 r-xp 00000000 08:03 141850 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libjava.so 7ff3173b2000-7ff3175b1000 ---p 0002b000 08:03 141850 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libjava.so 7ff3175b1000-7ff3175b2000 r--p 0002a000 08:03 141850 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libjava.so 7ff3175b2000-7ff3175b5000 rw-p 0002b000 08:03 141850 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libjava.so 7ff3175b5000-7ff3175c3000 r-xp 00000000 08:03 141866 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libverify.so 7ff3175c3000-7ff3177c2000 ---p 0000e000 08:03 141866 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libverify.so 7ff3177c2000-7ff3177c4000 r--p 0000d000 08:03 141866 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libverify.so 7ff3177c4000-7ff3177c5000 rw-p 0000f000 08:03 141866 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libverify.so 7ff3177c5000-7ff3177cc000 r-xp 00000000 08:03 921405 /lib/librt-2.12.1.so 7ff3177cc000-7ff3179cb000 ---p 00007000 08:03 921405 /lib/librt-2.12.1.so 7ff3179cb000-7ff3179cc000 r--p 00006000 08:03 921405 /lib/librt-2.12.1.so 7ff3179cc000-7ff3179cd000 rw-p 00007000 08:03 921405 /lib/librt-2.12.1.so 7ff3179cd000-7ff317a4f000 r-xp 00000000 08:03 921390 /lib/libm-2.12.1.so 7ff317a4f000-7ff317c4e000 ---p 00082000 08:03 921390 /lib/libm-2.12.1.so 7ff317c4e000-7ff317c4f000 r--p 00081000 08:03 921390 /lib/libm-2.12.1.so 7ff317c4f000-7ff317c50000 rw-p 00082000 08:03 921390 /lib/libm-2.12.1.so 7ff317c50000-7ff3184c4000 r-xp 00000000 08:03 141871 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server/libjvm.so 7ff3184c4000-7ff3186c3000 ---p 00874000 08:03 141871 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server/libjvm.so 7ff3186c3000-7ff318739000 r--p 00873000 08:03 141871 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server/libjvm.so 7ff318739000-7ff318754000 rw-p 008e9000 08:03 141871 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server/libjvm.so 7ff318754000-7ff31878d000 rw-p 00000000 00:00 0 7ff31878d000-7ff318907000 r-xp 00000000 08:03 921385 /lib/libc-2.12.1.so 7ff318907000-7ff318b06000 ---p 0017a000 08:03 921385 /lib/libc-2.12.1.so 7ff318b06000-7ff318b0a000 r--p 00179000 08:03 921385 /lib/libc-2.12.1.so 7ff318b0a000-7ff318b0b000 rw-p 0017d000 08:03 921385 /lib/libc-2.12.1.so 7ff318b0b000-7ff318b10000 rw-p 00000000 00:00 0 7ff318b10000-7ff318b12000 r-xp 00000000 08:03 921388 /lib/libdl-2.12.1.so 7ff318b12000-7ff318d12000 ---p 00002000 08:03 921388 /lib/libdl-2.12.1.so 7ff318d12000-7ff318d13000 r--p 00002000 08:03 921388 /lib/libdl-2.12.1.so 7ff318d13000-7ff318d14000 rw-p 00003000 08:03 921388 /lib/libdl-2.12.1.so 7ff318d14000-7ff318d18000 r-xp 00000000 08:03 141838 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/jli/libjli.so 7ff318d18000-7ff318f17000 ---p 00004000 08:03 141838 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/jli/libjli.so 7ff318f17000-7ff318f18000 r--p 00003000 08:03 141838 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/jli/libjli.so 7ff318f18000-7ff318f19000 rw-p 00004000 08:03 141838 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/jli/libjli.so 7ff318f19000-7ff318f31000 r-xp 00000000 08:03 921401 /lib/libpthread-2.12.1.so 7ff318f31000-7ff319130000 ---p 00018000 08:03 921401 /lib/libpthread-2.12.1.so 7ff319130000-7ff319131000 r--p 00017000 08:03 921401 /lib/libpthread-2.12.1.so 7ff319131000-7ff319132000 rw-p 00018000 08:03 921401 /lib/libpthread-2.12.1.so 7ff319132000-7ff319136000 rw-p 00000000 00:00 0 7ff319136000-7ff31914c000 r-xp 00000000 08:03 917772 /lib/libz.so.1.2.3.4 7ff31914c000-7ff31934c000 ---p 00016000 08:03 917772 /lib/libz.so.1.2.3.4 7ff31934c000-7ff31934d000 r--p 00016000 08:03 917772 /lib/libz.so.1.2.3.4 7ff31934d000-7ff31934e000 rw-p 00017000 08:03 917772 /lib/libz.so.1.2.3.4 7ff31934e000-7ff31936e000 r-xp 00000000 08:03 921379 /lib/ld-2.12.1.so 7ff319387000-7ff319391000 rw-p 00000000 00:00 0 7ff319391000-7ff319447000 rw-p 00000000 00:00 0 7ff319447000-7ff31944a000 ---p 00000000 00:00 0 7ff31944a000-7ff31954d000 rw-p 00000000 00:00 0 7ff319562000-7ff31956a000 rw-s 00000000 08:03 1966453 /tmp/hsperfdata_hjed/4041 7ff31956a000-7ff31956b000 rw-p 00000000 00:00 0 7ff31956b000-7ff31956c000 r--p 00000000 00:00 0 7ff31956c000-7ff31956e000 rw-p 00000000 00:00 0 7ff31956e000-7ff31956f000 r--p 00020000 08:03 921379 /lib/ld-2.12.1.so 7ff31956f000-7ff319570000 rw-p 00021000 08:03 921379 /lib/ld-2.12.1.so 7ff319570000-7ff319571000 rw-p 00000000 00:00 0 7fff0fb03000-7fff0fb24000 rw-p 00000000 00:00 0 [stack] 7fff0fbff000-7fff0fc00000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] VM Arguments: jvm_args: -Dfile.encoding=UTF-8 java_command: test.Main Launcher Type: SUN_STANDARD Environment Variables: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games USERNAME=hjed LD_LIBRARY_PATH=/usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server:/usr/lib/jvm/java-6-openjdk/jre/lib/amd64:/usr/lib/jvm/java-6-openjdk/jre/../lib/amd64 SHELL=/bin/bash DISPLAY=:0.0 Signal Handlers: SIGSEGV: [libjvm.so+0x712700], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGBUS: [libjvm.so+0x712700], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGFPE: [libjvm.so+0x5d4020], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGPIPE: [libjvm.so+0x5d4020], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGXFSZ: [libjvm.so+0x5d4020], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGILL: [libjvm.so+0x5d4020], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000 SIGUSR2: [libjvm.so+0x5d3730], sa_mask[0]=0x00000004, sa_flags=0x10000004 SIGHUP: [libjvm.so+0x5d61a0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGINT: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000 SIGTERM: [libjvm.so+0x5d61a0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGQUIT: [libjvm.so+0x5d61a0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 --------------- S Y S T E M --------------- OS:Ubuntu 10.10 (maverick) uname:Linux 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 libc:glibc 2.12.1 NPTL 2.12.1 rlimit: STACK 8192k, CORE 0k, NPROC infinity, NOFILE 1024, AS infinity load average:0.25 0.16 0.21 /proc/meminfo: MemTotal: 4048200 kB MemFree: 1230476 kB Buffers: 589572 kB Cached: 911132 kB SwapCached: 0 kB Active: 1321712 kB Inactive: 1202272 kB Active(anon): 1023852 kB Inactive(anon): 7168 kB Active(file): 297860 kB Inactive(file): 1195104 kB Unevictable: 64 kB Mlocked: 64 kB SwapTotal: 7065596 kB SwapFree: 7065596 kB Dirty: 632 kB Writeback: 0 kB AnonPages: 1023368 kB Mapped: 145832 kB Shmem: 7728 kB Slab: 111136 kB SReclaimable: 66316 kB SUnreclaim: 44820 kB KernelStack: 3824 kB PageTables: 27736 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 9089696 kB Committed_AS: 2378396 kB VmallocTotal: 34359738367 kB VmallocUsed: 332928 kB VmallocChunk: 34359397884 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 67136 kB DirectMap2M: 4118528 kB CPU:total 8 (4 cores per cpu, 2 threads per core) family 6 model 26 stepping 5, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, popcnt, ht Memory: 4k page, physical 4048200k(1230476k free), swap 7065596k(7065596k free) vm_info: OpenJDK 64-Bit Server VM (19.0-b09) for linux-amd64 JRE (1.6.0_20-b20), built on Dec 10 2010 19:45:55 by "buildd" with gcc 4.4.5 time: Sat Jan 1 14:12:27 2011 elapsed time: 0 seconds The java code is: ... public class Main { public static void main(String[] args) { ... ImageFile img = new ImageFile(System.getProperty("user.home") + "/PC100001.JPG"); Exiv2MetaDataStore e = new Exiv2MetaDataStore(img); Iterator<Entry<String, String>> i = e.entrySet().iterator(); while (i.hasNext()) { Entry<String, String> entry = i.next(); System.out.println(entry.getKey() + ":" + entry.getValue()); } //if you switch this print statment with the while loop you get the same error. // System.out.print(e.toString()); } } and /** NB: MetaDataStore is an abstract class that extends HashMap<String,String> */ public class Exiv2MetaDataStore extends MetaDataStore{ ... private final ImageFile F; /** * Creates an meta data store from an ImageFile using Exiv2 * this calls loadData(); * @param f */ public Exiv2MetaDataStore(ImageFile f) { F = f; loadData(); } ... @Override protected void loadData() { loadFromExiv2(); } ... private void loadFromExiv2() { impl_loadFromExiv(F.getAbsolutePath(), this); } private native void impl_loadFromExiv(String path, Exiv2MetaDataStore str); //this method called by the C++ code public void exiv2_reciveElement(String key, String value) { super.put(key,value); } static { Runtime.getRuntime().load("/home/hjed/libExiff2-binding.so"); } } C++ code: #include <exif.hpp> #include <image.hpp> #include <iptc.hpp> #include <exiv2/exiv2.hpp> #include <exiv2/error.hpp> #include <iostream> #include <iomanip> #include <cassert> void loadIPTC(Exiv2::Image::AutoPtr image, const char * path, JNIEnv * env, jobject obj) { Exiv2::IptcData &iptcData = image->iptcData(); //load method jclass cls = env->GetObjectClass(obj); jmethodID mid = env->GetMethodID(cls, "exiv2_reciveElement", "(Ljava/lang/String;Ljava/lang/String;)V"); //is there any IPTC data AND check that method exists if (iptcData.empty() | (mid == NULL)) { std::string error(path); error += ": failed loading IPTC data, there may not be any data"; } else { Exiv2::IptcData::iterator end = iptcData.end(); for (Exiv2::IptcData::iterator md = iptcData.begin(); md != end; ++md) { jvalue values[2]; const char* key = md->key().c_str(); values[0].l = env->NewStringUTF(key); md->value().toString().c_str(); const char* value = md->typeName(); values[2].l = env->NewStringUTF(value); //If I replace the code for values[2] with the commented out code I get the same error. //const char* type = md->typeName(); //values[2].l = env->NewStringUTF(type); env->CallVoidMethodA(obj, mid, values); } } } void getVars(const char* path, JNIEnv * env, jobject obj) { //Load image Exiv2::Image::AutoPtr image = Exiv2::ImageFactory::open(path); assert(image.get() != 0); image->readMetadata(); //Load IPTC data loadIPTC(image, path, env, obj); } JNIEXPORT void JNICALL Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv(JNIEnv * env, jobject obj, jstring path, jobject obj2) { const char* path2 = env->GetStringUTFChars(path, NULL); getVars(path2, env, obj); env->ReleaseStringUTFChars(path, path2); } I've searched for a fix for this, but I can't find one. I don't have much experience using C++ so if I've made an obvious mistake in the C code I apologies. Thanks for any help, HJED P.S. This is my first post on this site and I wasn't sure how much of the code I needed to show. Sorry if I've put to much up.

    Read the article

< Previous Page | 8 9 10 11 12