Search Results

Search found 360 results on 15 pages for 'modular'.

Page 12/15 | < Previous Page | 8 9 10 11 12 13 14 15  | Next Page >

  • PyQt - How to connect multiple signals to the same widget

    - by Orchainu
    [ ]All1 [ ]All2 [ ]checkbox1A [ ]checkbox1B [ ]checkbox2A [ ]checkbox2B Based on the chart above, a few things need to happen: The All checkboxes only affect the on/off of the column it resides in, and checks on/off all the checkboxes in that column. All checkboxes work in pairs, so if checkbox1A is on/off, checkbox1B needs to be on/off If an All checkbox is checked on, and then the user proceeds to check off one or more checkbox in the column, the All checkbox should be unchecked, but all the checkboxes that are already checked should remain checked. So really this is more like a chain reaction setup. If checkbox All1 is on, then chieckbox1A and 2A will be on, and because they are on, checkbox1B and 2B are also on, but checkbox All2 remains off. I tried hooking up the signals based on this logic, but only the paired logic works 100%. The All checkbox logic only works 50% of the time, and not accurately, and there's no way for me to turn off the All checkbox without turning all already checked checkboxes off. Really really need help ... T-T Sample code: cbPairKeys = cbPairs.keys() for key in cbPairKeys: cbOne = cbPairs[key][0][0] cbTwo = cbPairs[key][1][0] cbOne.stateChanged.connect(self.syncCB) cbTwo.stateChanged.connect(self.syncCB) def syncCB(self): pairKeys = cbPairs.keys() for keys in pairKeys: cbOne = cbPairs[keys][0][0] cbOneAllCB = cbPairs[keys][0][4] cbTwo = cbPairs[keys][1][0] cbTwoAllCB = cbPairs[keys][1][4] if self.sender() == cbOne: if cbOne.isChecked() or cbTwoAllCB.isChecked(): cbTwo.setChecked(True) else: cbTwo.setChecked(False) else: if cbTwo.isChecked() or cbOneAllCB.isChecked(): cbOne.setChecked(True) else: cbOne.setChecked(False) EDIT Thanks to user Avaris's help and patience, I was able to reduce the code down to something much cleaner and works 100% of the time on the 1st and 2nd desired behavior: #Connect checkbox pairs cbPairKeys = cbPairs.keys() for key in cbPairKeys: cbOne = cbPairs[key][0][0] cbTwo = cbPairs[key][1][0] cbOne.toggled.connect(cbTwo.setChecked) cbTwo.toggled.connect(cbOne.setChecked) #Connect allCB and allRO signals cbsKeys = allCBList.keys() for keys in cbsKeys: for checkbox in allCBList[keys]: keys.toggled.connect(checkbox.setChecked) Only need help on turning off the All checkbox when the user selectively turns off the modular checkboxes now

    Read the article

  • Java Equivalent of C++ .dll?

    - by Matt D
    So, I've been programming for a while now, but since I haven't worked on many larger, modular projects, I haven't come across this issue before. I know what a .dll is in C++, and how they are used. But every time I've seen similar things in Java, they've always been packaged with source code. For instance, what would I do if I wanted to give a Java library to someone else, but not expose the source code? Instead of the source, I would just give a library as well as a Javadoc, or something along those lines, with the public methods/functions, to another programmer who could then implement them in their own Java code. For instance, if I wanted to create a SAX parser that could be "borrowed" by another programmer, but (for some reason--can't think of one in this specific example lol) I don't want to expose my source. Maybe there's a login involved that I don't want exploited--I don't know. But what would be the Java way of doing this? With C++, .dll files make it much easier, but I have never run into a Java equivalent so far. (I'm pretty new to Java, and a pretty new "real-world" programmer, in general as well)

    Read the article

  • Servlets: forwarding to a resource in a different webapp

    - by skaffman
    I'm trying to construct a java web app along modular principles, with some common resources (JSPs, mainly) in one WAR, and some custom resources in another. This means JSPs scattered across different WARs. Now JavaEE frowns upon this sort of shenanigans, and wants you to put everything in one place. My current workaround to this is to have an Eclipse-triggered Ant script which copies the content of one WAR into the other, but this is not a pleasant solution (it's fragile and too IDE-dependent). Ideally, what I'd like to be able to do is for a servlet to forward to a JSP located in a different WAR to one in which it is itself deployed. This would allow greater freedom in how I assemble my WARs. However, the RequestDispatcher does not seem to support such things. Another possibility is to use <c:import>, which does allow resources to be imported from a different WAR (with some caveats). This would probably allow me to have a "hook" JSP in one WAR, which then drags in the required JSP from another. This is a bit clunky, though, and the fact that <c:import> permits it shows that the underlying servlet API does also. But how do I access that functionality via the RequestDispatcher in a servlet?

    Read the article

  • An issue on object orientation in php

    - by rabidmachine9
    Hello people, I have come up to issues while I'm trying to write some classes, here is an example: I have this class called TwitterGrub and I cant call it like that: $c = new TwitterGrub(); $c->twitterDisplay(); here is the class itself: <?php class TwitterGrub{ function twitterCapture($user = 'username',$password = 'pass') { $ch = curl_init("https://twitter.com/statuses/user_timeline.xml"); curl_setopt($ch, CURLOPT_HEADER, 1); curl_setopt($ch,CURLOPT_TIMEOUT, 30); curl_setopt($ch,CURLOPT_USERPWD,$user . ":" . $password); curl_setopt($ch,CURLOPT_RETURNTRANSFER,1); curl_setopt ($ch, CURLOPT_SSL_VERIFYPEER, 0); curl_setopt ($ch, CURLOPT_SSL_VERIFYHOST, 0); $result=curl_exec ($ch); $data = strstr($result, '<?'); $xml = new SimpleXMLElement($data); return $xml; } function twitterDisplay($twitNum = 2){ $xml = $this::twitterCapture(); for($i= 0; $i<$twitNum; $i++){ echo "<div class= 'curvebox'>".$xml->status[$i]->text."</div>"; } } } ?> The problem is that everytime I want to change the username or password I have to jump back to class definition and that makes things not modular... and in many ways it feels wrong. So the question is what would be the proper way to chance my username and password through the objects interface and then call twitterDisplay() method with the new data?Hope that makes sense. Thanks in advance

    Read the article

  • SSD Fresh Does Not Start

    - by Jim Fell
    I recently installed a new 60GB SSD as my primary hard drive and re-installed Windows 7 Professional 64-bit. I then installed SSD Fress from Abelssoft to optimize Windows to run on the SSD. It seemed to install okay, but when I try to run the utility, its splash screen appears briefly before it quietly closes. No errors are displayed; the utility just fails to launch. I have run SSD Fresh on another SSD-equipped Windows 7 Pro x64 computer in the past without any problems. Does anyone know what might be preventing the program from running? I tried shutting down the Spybot Resident and disabling the firewall and virus scanner with no luck. I also tried running the tool as administrator; I even tried reinstalling it, running the installer as administrator. No luck. Every time I try to launch the program the Event Viewer logs this same set of errors: Error 4/2/2012 11:35:44 PM Application Error 1000 (100) Error 4/2/2012 11:35:43 PM .NET Runtime 1026 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None For those who are interested, here is my system configuration: ASRock M3A770DE AM3 AMD 770 ATX AMD Motherboard AMD Athlon II X3 455 Rana 3.3GHz Socket AM3 95W Triple-Core Desktop Processor ADX455WFGMBOX G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model F3-10600CL9D-8GBNT Mushkin Enhanced Chronos Deluxe MKNSSDCR60GB-DX 2.5" 60GB SATA III Synchronous MLC Internal Solid State Drive (SSD) (Primary/Boot HD) Western Digital Caviar Blue RFHWD1600AAJS 160GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive (Secondary HD) Sony Optiarc CD/DVD Burner Black SATA Model AD-7261S-0B LightScribe Support RAIDMAX RX-850AE 850W ATX12V v2.3 / EPS12V SLI Certified CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card Asus ML228H 21.5" Full HD LED BackLight LED Monitor Slim Design (x3)

    Read the article

  • Crashes and freezes after fixing "BOOTMGR is missing" error

    - by Greg-J
    I came back from a 3-day weekend to a computer that was off. I leave my PC on 24/7, so this was odd. Turn it on to get the dreaded "BOOTMGR is missing" screen. Two attempts at Windows Recovery and it booted into Windows fine. After an hour or so, I get a frozen Chrome and my start bar disappears. Ctrl+Alt+Del brings up an error box telling me that Ctrl+Alt+Del failed to work properly. Clicking on any open application triggers an error (I can't recall the error now, but it essentially just said that the application couldn't be found running or something along those lines). I restart, and again, the same thing happens after a while of use. I turn it on, install the 47 updates I have or so, and then restart it. After a while of use (under an hour), it just freezes completely. My thoughts are: SSDs, RAM or PS. My system specs below: (RAID0) 2 x Crucial M4 CT128M4SSD2 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CML16GX3M4A1600C9 CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active 1 x ASUS Maximus IV Gene-Z/GEN3 LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard 1 x Hitachi GST Deskstar 7K1000.C 0F10383 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive 1 x Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 1 x SAPPHIRE 21197-00-40G Radeon HD 7970 3GB 384-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card 1 x Noctua NH-D14 120mm & 140mm SSO CPU Cooler This is all crammed in a pretty small case (NZXT Vulcan) and has been running perfectly problem-free since January. The only thing out of the ordinary is that there is a fan in the case that is now making noise whereas the case has previously been completely silent. I have no reason to believe this is anything more then correlation, but felt it is worth mentioning. I believe it MAY be the SSDs simply because of the BOOTMGR error, but not sure how to test that theory. My belief that it may be the RAM is simply from experience with frozen machines. I haven't had the time to memtest it, but will. The PS being the culprit is something I've picked up by reading similar threads on various forums, and it seems plausible. I am unsure how to test this though. ANY insight whatsover would be greatly appreciated!

    Read the article

  • Computer experiencing slowdowns and lockups despite low cpu useage

    - by user157145
    my setup i5-2300 nvidia gtx 550 ti 6 gigs ram 600 w ocz modular psu recently reformatted and already experiencing drastic slowdown as soon as windows comes up, including repeated lockups with multiple various programs reporting that they are not responsive, then recovering after 10-30 seconds. ive checked memory and hard drive both of which come out fine. despite my plethura of worthless antiviral software im forced to assume that my illicit downloading practices have lead me into some comp trouble that i cant seem to determine. i have used ccleaner, search and destroy and malware bytes, all of which have found nothing to indicate what is causing this massive slowdown. in addition according to my resource manager my computer is operating at a load of only 30-50 percent CPU useage and 60 ram useage but taking 5-10 seconds to load files and open folders, and repeated lockups of multiple programs, especially firefox which seems to go unresponsive every 2-3 minutes. any help would be appreciated, i used a program called OTL by old timer, but cant make any sense of the results i was given. any help or suggestions would be appreciated, thank you for taking the time to read this i have avast but it didnt even find anything when i had it do a full system scan, so im thinking its clueless(also nortons, avg, and ad-aware). i also have mse but it has yet to complete a full scan it takes so long (i left it on last night but when i woke up my computer had a problem and had to restart). my hard drive has 300 gigs out of 1tb open and i already used hd tune pro, which said my harddrive was fine and its not a ssd. also im a noob at comps and only have the hd that is currently inside the computer in addition im not sure if studdering is the issue im suffering. my problem is that during my typing of these responses firefox has gone "not responsive" at least 5 times, each for times of about 5-10 seconds. when i try to control alt delete to bring up windows task manager it took 20 seconds. essentially its that my computer goes super slow at bringing up anything, or taking any action whatsoever that opens a program or file and has repeated incidents where i cant even click on whatever im trying to do because it locks up. the confusing thing about these incidents is that its right after restarting where there are minimal programs running and the computer and memory load is light.

    Read the article

  • Why do some games randomly turn my screen a random solid color?

    - by Emlena.PhD
    When playing some games my computer will randomly have an error that I cannot fix without turning it off and back on again. The screen changes to one solid color, which varies (off the top of my head I can remember seeing solid green, magenta, etc..) and the sound blares a single tone. The sound sometimes briefly restores and I can still hear the game sounds and even hear and still be heard by people in my Mumble channel, but the screen doesn't right itself so I'm still blind. What's more is this happens in some games but not in others. While the game is actually running, not while I'm still in the menu. However, it does happen if I'm afk or idle but the game world is still rendering. Games where the error occurs: League of Legends World of Warcraft Trine The Sims 2 Dungeon Defenders Safe games: games where it has never occurred: Tribes: Ascend Star Wars: the Old Republic Battlefield 3 So relatively older games cause the problem while newer games do not? I cannot predict when it will happen, it just seems random. However, if it happens and I try playing the same game further after restart it does appear to occur more frequently after the first time. But if I switch to a safe game it doesn't continue happening. Both of my RAM sticks appear fine, flipped position or either one on their own and games still run, computer still boots. I would think over-heating, but then why not all games? ALso, sometimes it happens immediately after I start playing, within seconds of the 3D world booting up. I'm looking to upgrade very soon so I want to figure out what component or software is fubar and replace/repair it. Any suggestions or recommendations of tools would be helpful. Below is some system information. Dxdiag does not detect any problems. Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120305-1505) System Manufacturer: Gigabyte Technology Co., Ltd. System Model: EP45-UD3R BIOS: Award Modular BIOS v6.00PG Processor: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz (2 CPUs), ~3.2GHz Memory: 4096MB RAM DirectX Version: DirectX 11 DxDiag Version: 6.01.7601.17514 64bit Unicode Graphics card name: NVIDIA GeForce GTX 285 Driver Version: 8.17.12.9610 (error has occurred w/several driver versions) Sound: I do not have a sound card, been using motherboard's built in sound)

    Read the article

  • Sun Fire X4800 M2 Delivers World Record TPC-C for x86 Systems

    - by Brian
    Oracle's Sun Fire X4800 M2 server equipped with eight 2.4 GHz Intel Xeon Processor E7-8870 chips obtained a result of 5,055,888 tpmC on the TPC-C benchmark. This result is a world record for x86 servers. Oracle demonstrated this world record database performance running Oracle Database 11g Release 2 Enterprise Edition with Partitioning. The Sun Fire X4800 M2 server delivered a new x86 TPC-C world record of 5,055,888 tpmC with a price performance of $0.89/tpmC using Oracle Database 11g Release 2. This configuration is available 06/26/12. The Sun Fire X4800 M2 server delivers 3.0x times better performance than the next 8-processor result, an IBM System p 570 equipped with POWER6 processors. The Sun Fire X4800 M2 server has 3.1x times better price/performance than the 8-processor 4.7GHz POWER6 IBM System p 570. The Sun Fire X4800 M2 server has 1.6x times better performance than the 4-processor IBM x3850 X5 system equipped with Intel Xeon processors. This is the first TPC-C result on any system using eight Intel Xeon Processor E7-8800 Series chips. The Sun Fire X4800 M2 server is the first x86 system to get over 5 million tpmC. The Oracle solution utilized Oracle Linux operating system and Oracle Database 11g Enterprise Edition Release 2 with Partitioning to produce the x86 world record TPC-C benchmark performance. Performance Landscape Select TPC-C results (sorted by tpmC, bigger is better) System p/c/t tpmC Price/tpmC Avail Database MemorySize Sun Fire X4800 M2 8/80/160 5,055,888 0.89 USD 6/26/2012 Oracle 11g R2 4 TB IBM x3850 X5 4/40/80 3,014,684 0.59 USD 7/11/2011 DB2 ESE 9.7 3 TB IBM x3850 X5 4/32/64 2,308,099 0.60 USD 5/20/2011 DB2 ESE 9.7 1.5 TB IBM System p 570 8/16/32 1,616,162 3.54 USD 11/21/2007 DB2 9.0 2 TB p/c/t - processors, cores, threads Avail - availability date Oracle and IBM TPC-C Response times System tpmC Response Time (sec) New Order 90th% Response Time (sec) New Order Average Sun Fire X4800 M2 5,055,888 0.210 0.166 IBM x3850 X5 3,014,684 0.500 0.272 Ratios - Oracle Better 1.6x 1.4x 1.3x Oracle uses average new order response time for comparison between Oracle and IBM. Graphs of Oracle's and IBM's response times for New-Order can be found in the full disclosure reports on TPC's website TPC-C Official Result Page. Configuration Summary and Results Hardware Configuration: Server Sun Fire X4800 M2 server 8 x 2.4 GHz Intel Xeon Processor E7-8870 4 TB memory 8 x 300 GB 10K RPM SAS internal disks 8 x Dual port 8 Gbs FC HBA Data Storage 10 x Sun Fire X4270 M2 servers configured as COMSTAR heads, each with 1 x 3.06 GHz Intel Xeon X5675 processor 8 GB memory 10 x 2 TB 7.2K RPM 3.5" SAS disks 2 x Sun Storage F5100 Flash Array storage (1.92 TB each) 1 x Brocade 5300 switches Redo Storage 2 x Sun Fire X4270 M2 servers configured as COMSTAR heads, each with 1 x 3.06 GHz Intel Xeon X5675 processor 8 GB memory 11 x 2 TB 7.2K RPM 3.5" SAS disks Clients 8 x Sun Fire X4170 M2 servers, each with 2 x 3.06 GHz Intel Xeon X5675 processors 48 GB memory 2 x 300 GB 10K RPM SAS disks Software Configuration: Oracle Linux (Sun Fire 4800 M2) Oracle Solaris 11 Express (COMSTAR for Sun Fire X4270 M2) Oracle Solaris 10 9/10 (Sun Fire X4170 M2) Oracle Database 11g Release 2 Enterprise Edition with Partitioning Oracle iPlanet Web Server 7.0 U5 Tuxedo CFS-R Tier 1 Results: System: Sun Fire X4800 M2 tpmC: 5,055,888 Price/tpmC: 0.89 USD Available: 6/26/2012 Database: Oracle Database 11g Cluster: no New Order Average Response: 0.166 seconds Benchmark Description TPC-C is an OLTP system benchmark. It simulates a complete environment where a population of terminal operators executes transactions against a database. The benchmark is centered around the principal activities (transactions) of an order-entry environment. These transactions include entering and delivering orders, recording payments, checking the status of orders, and monitoring the level of stock at the warehouses. Key Points and Best Practices Oracle Database 11g Release 2 Enterprise Edition with Partitioning scales easily to this high level of performance. COMSTAR (Common Multiprotocol SCSI Target) is the software framework that enables an Oracle Solaris host to serve as a SCSI Target platform. COMSTAR uses a modular approach to break the huge task of handling all the different pieces in a SCSI target subsystem into independent functional modules which are glued together by the SCSI Target Mode Framework (STMF). The modules implementing functionality at SCSI level (disk, tape, medium changer etc.) are not required to know about the underlying transport. And the modules implementing the transport protocol (FC, iSCSI, etc.) are not aware of the SCSI-level functionality of the packets they are transporting. The framework hides the details of allocation providing execution context and cleanup of SCSI commands and associated resources and simplifies the task of writing the SCSI or transport modules. Oracle iPlanet Web Server middleware is used for the client tier of the benchmark. Each web server instance supports more than a quarter-million users while satisfying the response time requirement from the TPC-C benchmark. See Also Oracle Press Release -- Sun Fire X4800 M2 TPC-C Executive Summary tpc.org Complete Sun Fire X4800 M2 TPC-C Full Disclosure Report tpc.org Transaction Processing Performance Council (TPC) Home Page Ideas International Benchmark Page Sun Fire X4800 M2 Server oracle.com OTN Oracle Linux oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Sun Storage F5100 Flash Array oracle.com OTN Disclosure Statement TPC Benchmark C, tpmC, and TPC-C are trademarks of the Transaction Processing Performance Council (TPC). Sun Fire X4800 M2 (8/80/160) with Oracle Database 11g Release 2 Enterprise Edition with Partitioning, 5,055,888 tpmC, $0.89 USD/tpmC, available 6/26/2012. IBM x3850 X5 (4/40/80) with DB2 ESE 9.7, 3,014,684 tpmC, $0.59 USD/tpmC, available 7/11/2011. IBM x3850 X5 (4/32/64) with DB2 ESE 9.7, 2,308,099 tpmC, $0.60 USD/tpmC, available 5/20/2011. IBM System p 570 (8/16/32) with DB2 9.0, 1,616,162 tpmC, $3.54 USD/tpmC, available 11/21/2007. Source: http://www.tpc.org/tpcc, results as of 7/15/2011.

    Read the article

  • OTN Architect Day Headed to Reston, VA - May 16

    - by Bob Rhubart
    In 2011 OTN Architect Day made stops in Chicago, Denver, Phoenix, Redwood Shores, and Toronto. The 2012 series begins with OTN Architect Day in Reston, VA on Wednesday May 16. Registration is now open for this free event, but don't get caught napping -- seating is limited, and the event is just 5 weeks away. The information below reflects the most recent updates to the event agenda, including the addition of Oracle ACE Director Kai Yu as the guest keynote speaker. Kai is Senior System Engineer / Architect at Dell, Inc., and has been very busy of late as a speaker at various industry and Oracle User Group events. I'm very happy Kai has agreed to make the trek from his hometown in Austin, TX to share his insight at the Architect Day event in Reston.  If you're in the area, put this one on your calendar. You won't be sorry.   Venue Sheraton Reston Hotel 11810 Sunrise Valley Drive Reston, VA 20191 Event Agenda 8:30 am - 9:00 am Registration and Continental Breakfast 9:00 am - 9:15 am Welcome and Opening Comments 9:15 am - 10:00 am Engineered Systems: Oracle's Vision for the Future | Ralf Dossman Oracle's Exadata and Exalogic are impressive products in their own right. But working in combination they deliver unparalleled transaction processing performance with up to a 30x increase over existing legacy systems, with the lowest cost of ownership over a 3 or 5 year basis than any other hardware. In this session you'll learn how to leverage Oracle's Engineered Systems within your enterprise to deliver record-breaking performance at the lowest TCO. 10:00 am - 10:30 am High Availability Infrastructure for Cloud Computing | Kai Yu Infrastructure high availability is extremely critical to Cloud Computing. In a Cloud system that hosts a large number of databases and applications with different SLAs, any unplanned outage can be devastating, and even a small planned downtime may be unacceptable. This presentation will discuss various technology solutions and the related best practices that system architects should consider in cloud infrastructure design to ensure high availability. 10:30 am - 10:45 am Break 10:45 am - 11:30 am Breakout Sessions: (pick one) Innovations in Grid Computing with Oracle Coherence | Bjorn Boe Learn how Coherence can increase the availability, scalability and performance of your existing applications with its advanced low-latency data-grid technologies. Also hear some interesting industry-specific use cases that customers had implemented and how Oracle is integrating Coherence into its Enterprise Java stack. Cloud Computing - Making IT Simple | Scott Mattoon The road to Cloud Computing is not without a few bumps. This session will help to smooth out your journey by tackling some of the potential complications. We'll examine whether standardization is a prerequisite for the Cloud. We'll look at why refactoring isn't just for application code. We'll check out deployable entities and their simplification via higher levels of abstraction. And we'll close out the session with a look at engineered systems and modular clouds. 11:30 pm - 12:15 pm Breakout Sessions: (pick one) Oracle Enterprise Manager | Joe Diemer Oracle Enterprise Manager (EM) provides complete lifecycle management for the cloud - from automated cloud setup to self-service delivery to cloud operations. In this session you'll learn how to take control of your cloud infrastructure with EM features including Consolidation Planning and Self-Service provisioning with Metering and Chargeback. Come hear how Oracle is expanding its management capabilities into the cloud! Rationalization and Defense in Depth - Two Steps Closer to the Clouds | Dave Chappelle Security represents one of the biggest concerns about cloud computing. In this session we'll get past the FUD with a real-world look at some key issues. We'll discuss the infrastructure necessary to support rationalization and security services, explore architecture for defense -in-depth, and deal frankly with the good, the bad, and the ugly in Cloud security. 12:15 pm - 1:15 pm Lunch 1:40 pm - 2:00 pm Panel Discussion - Q&A 2:00 pm - 2:45 pm Breakout Sessions: (pick one) 21st Century SOA | Peter Belknap Service Oriented Architecture has evolved from concept to reality in the last decade. The right methodology coupled with mature SOA technologies has helped customers demonstrate success in both innovation and ROI. In this session you will learn how Oracle SOA Suite's orchestration, virtualization, and governance capabilities provide the infrastructure to run mission critical business and system applications. And we'll take a special look at the convergence of SOA & BPM using Oracle's Unified technology stack. Track B: Oracle Cloud Reference Architecture | Anbu Krishnaswamy Cloud initiatives are beginning to dominate enterprise IT roadmaps. Successful adoption of Cloud and the subsequent governance challenges warrant a Cloud reference architecture that is applied consistently across the enterprise. This presentation gives an overview of Oracle's Cloud Reference Architecture, which is part of the Cloud Enterprise Technology Strategy (ETS). Concepts covered include common management layer capabilities, service models, resource pools, and use cases. 2:45 pm - 3:00 pm Break 3:00 pm - 4:00 pm Roundtable Discussions 4:00 pm - 4:15 pm Closing Comments & Readouts from Roundtable 4:15 pm - 5:00 pm Cocktail Reception / Networking Session schedule and content subject to change.

    Read the article

  • Getting Started with Prism (aka Composite Application Guidance for WPF and Silverlight)

    - by dotneteer
    Overview Prism is a framework from the Microsoft Patterns and Practice team that allow you to create WPF and Silverlight in a modular way. It is especially valuable for larger projects in which a large number of developers can develop in parallel. Prism achieves its goal by supplying several services: · Dependency Injection (DI) and Inversion of control (IoC): By using DI, Prism takes away the responsibility of instantiating and managing the life time of dependency objects from individual components to a container. Prism relies on containers to discover, manage and compose large number of objects. By varying the configuration, the container can also inject mock objects for unit testing. Out of the box, Prism supports Unity and MEF as container although it is possible to use other containers by subclassing the Bootstrapper class. · Modularity and Region: Prism supplies the framework to split application into modules from the application shell. Each module is a library project that contains both UI and code and is responsible to initialize itself when loaded by the shell. Each window can be further divided into regions. A region is a user control with associated model. · Model, view and view-model (MVVM) pattern: Prism promotes the user MVVM. The use of DI container makes it much easier to inject model into view. WPF already has excellent data binding and commanding mechanism. To be productive with Prism, it is important to understand WPF data binding and commanding well. · Event-aggregation: Prism promotes loosely coupled components. Prism discourages for components from different modules to communicate each other, thus leading to dependency. Instead, Prism supplies an event-aggregation mechanism that allows components to publish and subscribe events without knowing each other. Architecture In the following, I will go into a little more detail on the services provided by Prism. Bootstrapper In a typical WPF application, application start-up is controls by App.xaml and its code behind. The main window of the application is typically specified in the App.xaml file. In a Prism application, we start a bootstrapper in the App class and delegate the duty of main window to the bootstrapper. The bootstrapper will start a dependency-injection container so all future object instantiations are managed by the container. Out of box, Prism provides the UnityBootstrapper and MefUnityBootstrapper abstract classes. All application needs to either provide a concrete implementation of one of these bootstrappers, or alternatively, subclass the Bootstrapper class with another DI container. A concrete bootstrapper class must implement the CreateShell method. Its responsibility is to resolve and create the Shell object through the DI container to serve as the main window for the application. The other important method to override is ConfigureModuleCatalog. The bootstrapper can register modules for the application. In a more advance scenario, an application does not have to know all its modules at compile time. Modules can be discovered at run time. Readers to refer to one of the Open Modularity Quick Starts for more information. Modules Once modules are registered with or discovered by Prism, they are instantiated by the DI container and their Initialize method is called. The DI container can inject into a module a region registry that implements IRegionViewRegistry interface. The module, in its Initialize method, can then call RegisterViewWithRegion method of the registry to register its regions. Regions Regions, once registered, are managed by the RegionManager. The shell can then load regions either through the RegionManager.RegionName attached property or dynamically through code. When a view is created by the region manager, the DI container can inject view model and other services into the view. The view then has a reference to the view model through which it can interact with backend services. Service locator Although it is possible to inject services into dependent classes through a DI container, an alternative way is to use the ServiceLocator to retrieve a service on demard. Prism supplies a service locator implementation and it is possible to get an instance of the service by calling: ServiceLocator.Current.GetInstance<IServiceType>() Event aggregator Prism supplies an IEventAggregator interface and implementation that can be injected into any class that needs to communicate with each other in a loosely-coupled fashion. The event aggregator uses a publisher/subscriber model. A class can publishes an event by calling eventAggregator.GetEvent<EventType>().Publish(parameter) to raise an event. Other classes can subscribe the event by calling eventAggregator.GetEvent<EventType>().Subscribe(EventHandler, other options). Getting started The easiest way to get started with Prism is to go through the Prism Hands-On labs and look at the Hello World QuickStart. The Hello World QuickStart shows how bootstrapper, modules and region works. Next, I would recommend you to look at the Stock Trader Reference Implementation. It is a more in depth example that resemble we want to set up an application. Several other QuickStarts cover individual Prism services. Some scenarios, such as dynamic module discovery, are more advanced. Apart from the official prism document, you can get an overview by reading Glen Block’s MSDN Magazine article. I have found the best free training material is from the Boise Code Camp. To be effective with Prism, it is important to understands key concepts of WPF well first, such as the DependencyProperty system, data binding, resource, theme and ICommand. It is also important to know your DI container of choice well. I will try to explorer these subjects in depth in the future. Testimony Recently, I worked on a desktop WPF application using Prism. I had a wonderful experience with Prism. The Prism is flexible enough even in the presence of third party controls such as Telerik WPF controls. We have never encountered any significant obstacle.

    Read the article

  • Integration with Multiple Versions of BizTalk HL7 Accelerator Schemas

    - by Paul Petrov
    Microsoft BizTalk Accelerator for HL7 comes with multiple versions of the HL7 implementation. One of the typical integration tasks is to receive one format and transmit another. For example, system A works HL7 v2.4 messages, system B with v2.3, and system C with v2.2. The system A is exchanging messages with B and C. The logical solution is to create schemas in separate namespaces for each system and assign maps on send ports. Schematic diagram of the messaging solution is shown below:   Nothing is complex about that conceptually. On the implementation level things can get nasty though because of the elaborate nature of HL7 schemas and sheer amount of message types involved. If trying to implement maps directly in BizTalk Map Editor one would quickly get buried by thousands of links between subfields of HL7 segments. Since task is repetitive because HL7 segments are reused between message types it's natural to take advantage of such modular structure and reduce amount of work through reuse. Here's where it makes sense to switch from visual map editor to old plain XSLT. The implementation is done in three steps. First, create XSL templates to map from segments of one version to another. This can be done using BizTalk Map Editor subsequently copying and modifying generated XSL code to create one xsl:template per segment. Group all segments for format mapping in one XSL file (we call it SegmentTemplates.xsl). Here's how template for the PID segment (Patient Identification) would look like this: <xsl:template name="PID"> <PID_PatientIdentification> <xsl:if test="PID_PatientIdentification/PID_1_SetIdPatientId"> <PID_1_SetIdPid> <xsl:value-of select="PID_PatientIdentification/PID_1_SetIdPatientId/text()" /> </PID_1_SetIdPid> </xsl:if> <xsl:for-each select="PID_PatientIdentification/PID_2_PatientIdExternalId"> <PID_2_PatientId> <xsl:if test="CX_0_Id"> <CX_0_Id> <xsl:value-of select="CX_0_Id/text()" /> </CX_0_Id> </xsl:if> <xsl:if test="CX_1_CheckDigit"> <CX_1_CheckDigitSt> <xsl:value-of select="CX_1_CheckDigit/text()" /> </CX_1_CheckDigitSt> </xsl:if> <xsl:if test="CX_2_CodeIdentifyingTheCheckDigitSchemeEmployed"> <CX_2_CodeIdentifyingTheCheckDigitSchemeEmployed> <xsl:value-of select="CX_2_CodeIdentifyingTheCheckDigitSchemeEmployed/text()" /> </CX_2_CodeIdentifyingTheCheckDigitSchemeEmployed> . . . // skipped for brevity This is the most tedious and time consuming part. Templates can be created for only those segments that are used in message interchange. Once this is done the rest goes much easier. The next step is to create message type specific XSL that references (imports) segment templates XSL file. Inside this file simple call segment templates in appropriate places. For example, beginning of the mapping XSL for ADT_A01 message would look like this:   <xsl:import href="SegmentTemplates_23_to_24.xslt" />  <xsl:output omit-xml-declaration="yes" method="xml" version="1.0" />   <xsl:template match="/">    <xsl:apply-templates select="s0:ADT_A01_23_GLO_DEF" />  </xsl:template>   <xsl:template match="s0:ADT_A01_23_GLO_DEF">    <ns0:ADT_A01_24_GLO_DEF>      <xsl:call-template name="EVN" />      <xsl:call-template name="PID" />      <xsl:for-each select="PD1_PatientDemographic">        <xsl:call-template name="PD1" />      </xsl:for-each>      <xsl:call-template name="PV1" />      <xsl:for-each select="PV2_PatientVisitAdditionalInformation">        <xsl:call-template name="PV2" />      </xsl:for-each> This code simply calls segment template directly for required singular elements and in for-each loop for optional/repeating elements. And lastly, create BizTalk map (btm) that references message type specific XSL. It is essentially empty map with Custom XSL Path set to appropriate XSL: In the end, you will end up with one segment templates file that is referenced by many message type specific XSL files which in turn used by BizTalk maps. Once all segment maps are created they are widely reusable and all the rest work is very simple and clean.

    Read the article

  • Architect Day: Boston - Agenda Update

    - by Bob Rhubart
    Here's the latest information on the session schedule and content for Oracle Technology Network Architect Day in Boston, MA on September 12, 2012. Registration is open, but seating is limited. When: September 12, 2012 8:30am – 5:00pm Where: Boston Marriott Burlington One Burlington Mall Road Burlington, MA 01803 Register now Agenda Time Session Title Room 8:30 am - 9:00 am Registration and Continental Breakfast Salon E Foyer 9:00 am - 9:15 am Welcome and Opening Comments | Bob Rhubart Salon E 9:15 am - 10:00 am Engineered Systems: Oracle's Vision for the Future | Ralf Dossmann Oracle's Exadata and Exalogic are impressive products in their own right. But working in combination they deliver unparalleled transaction processing performance with up to a 30x increase over existing legacy systems, with the lowest cost of ownership over a 3 or 5 year basis than any other hardware. In this session you'll learn how to leverage Oracle's Engineered Systems within your enterprise to deliver record-breaking performance at the lowest TCO. Salon E 10:00 am - 10:30 am Securing Public and Private Clouds | Anton Nielsen Long before the term "Cloud Computing" existed, Oracle technologies supported and promoted the concept. Centralized data with remote users has been at the core of these technologies for decades. The public cloud, and extending private clouds to the internet, though, has added security challenges never imagined decades ago. This presentation will examine a real life security breach and introduce architecture, technologies and policies to secure public and private clouds.  Salon E 10:30 am - 10:45 am Break 10:45 am - 11:30 am Breakout Sessions (pick one) Cloud Computing - Making IT Simple | Scott Mattoon The road to Cloud Computing is not without a few bumps. This session will help to smooth out your journey by tackling some of the potential complications. We'll examine whether standardization is a prerequisite for the Cloud. We'll look at why refactoring isn't just for application code. We'll check out deployable entities and their simplification via higher levels of abstraction. And we'll close out the session with a look at engineered systems and modular clouds. Salon E Innovations in Grid Computing with Oracle Coherence | Rob Misek Learn how Coherence can increase the availability, scalability and performance of your existing applications with its advanced low-latency data-grid technologies. Also hear some interesting industry-specific use cases that customers had implemented and how Oracle is integrating Coherence into its Enterprise Java stack. Salon C 11:30 am - 12:15 pm Breakout Sessions (pick one) Enterprise Strategy for Cloud Security | Dave Chappelle Security is high on the list of concerns for many organizations as they evaluate their cloud computing options. This session will examine security in the context of the various forms of cloud computing. We'll consider technical and non-technical aspects of security, and discuss several strategies for cloud computing, from both the consumer and producer perspectives. Salon E Oracle Enterprise Manager | Avi Huber Much more than a DB management tool, Oracle Enterprise Manager provides management and monitoring coverage for the entire Oracle stack, and beyond. This session will concentrate on the middleware management functionality in OEM, starting with Real User Experience monitoring, through AppServer management, and into deep-dive Java diagnostics. We’ll discuss Business Driven Application Management (BDAM) and the benefits of top-down monitoring. Lastly, we’ll demonstrate how to trace a specific user experience problem, through a multitier SOA application, to its root cause, deep in the JVM. Salon C 12:15 pm - 1:15 pm Lunch Salon E Foyer 1:15 pm - 2:00 pm Panel Discussion - Q&A with session speakers Salon E 2:00 pm - 2:45 pm Breakout Sessions (pick one) Oracle Cloud Reference Architecture | Anbu Krishnaswamy Cloud initiatives are beginning to dominate enterprise IT roadmaps. Successful adoption of Cloud and the subsequent governance challenges warrant a Cloud reference architecture that is applied consistently across the enterprise. This presentation will answer the important questions: What exactly is a Cloud, why you need it, what changes it will bring to the enterprise, and what are the key capabilities of a Cloud infrastructure are - using Oracle's Cloud Reference Architecture, which is part of the IT Strategies from Oracle (ITSO) Cloud Enterprise Technology Strategy (ETS). Salon E 21st Century SOA | Peter Belknap Service Oriented Architecture has evolved from concept to reality in the last decade. The right methodology coupled with mature SOA technologies has helped customers demonstrate success in both innovation and ROI. In this session you will learn how Oracle SOA Suite's orchestration, virtualization, and governance capabilities provide the infrastructure to run mission critical business and system applications. And we'll take a special look at the convergence of SOA & BPM using Oracle's Unified technology stack. Salon C 2:45 pm - 3:00 pm Break 3:00 pm - 4:00 pm Roundtable Discussion Salon E 4:00 pm - 4:15 pm Closing Comments & Readouts from Roundtables Salon E 4:15 pm - 5:00 pm Networking / Reception Salon E Foyer Note: Session schedule and content subject to change.

    Read the article

  • The first day of JavaOne is already over!

    - by delabassee
    In the past Sunday used to be a more relaxing day with ‘just’ some JavaOne activities going on. Sunday used to be a soft day to prepare yourself for an exhausting week. This is now over as JavaOne is expanding; Sunday is now an integral part of the conference. One of the side effect of this extra day is that some activities related to JavaOne and OpenWorld such as MySQL Connect are being push to start a day earlier on Saturday (can you spot the pattern here?). On the GlassFish front, Sunday was a very busy day! It started at the Moscone Center with the annual GlassFish Community Event where the Java EE 7 and GF 4 roadmaps were presented and discussed. During the event, different GlassFish users such as ZeroTurnaround (the JRebel guys), Grupo RBS and IDR Solutions shared their views on GF, why they like GF but also what could be improved. The event was also a forum for the GF community to exchange with some of the key Java EE / GlassFish Oracle Executives and the different GF team members. The Strategy keynote and the Technical keynote were held in the Masonic Auditorium later in the after-noon. Oracle executives have presented the plans for Java SE, Java FX and Java EE. As on-demand replays will be available soon, I will not summarize several hours of content but here are some personal takeaways from those keynotes. Modularity Modularity is a big deal. We know by now that Project Jigsaw will not be ready for Java SE 8 but in any case, it is already possible (and encouraged) to test Jigsaw today. In the future, Java EE plan to rely on the modularity features provided by Java SE, so Project Jigsaw is also relevant for Java EE developers. Shorter term, to cover some of the modular requirements, Java SE will adopt the approach that was used for Java EE 6 and the notion of Profiles. This approach does not define a module system per say; Profiles is a way to clearly define different subsets of Java SE to fulfill different needs (e.g. the full JRE is not required for a headless application). The introduction of different Profiles, from the Base profile (10mb) to the Full Profile (+50mb), has been proposed for Java SE 8. Embedded Embedded is a strong theme going forward for the Java Plaform. There is now a dedicated program : Java Embedded @ JavaOne Java by nature (e.g. platform independence, built-in security, ability easily talks to any back-end systems, large set of skills available on the market, etc.) is probably the most suited platform for the Internet of Things. You can quickly be up-to-speed and develop services and applications for that space just by using your current Java skills. All you need to start developing on ARM is a 35$ Raspberry Pi ARM board (25$ if you are cheap and can live without an ethernet connection) and the recently released JDK for Linux/ARM. Obviously, GlassFish runs on Raspberry Pi. If you wan to go further in the embedded space, you should take a look Java SE Embedded, an optimized, low footprint, Java environment that support the major embedded architectures (ARM, PPC and x86). Finally, Oracle has recently introduced Java Embedded Suite, a new solution that brings modern middleware capabilities to the embedded space. Java Embedded Suite is an optimized solution that leverage Java SE Embedded but also GlassFish, Jersey and JavaDB to deploy advanced value added capabilities (eg. sensor data filtering and) deeper in the network, closer to the devices. JavaFX JavaFX is going strong! Starting from Java SE 7u6, JavaFX is bundled with the JDK. JavaFX is now available for all the major desktop platforms (Windows, Linux and Mac OS X). JavaFX is now also available, in developer preview, for low end device running Linux/ARM. During the keynote, JavaFX was shown running on a Raspberry Pi! And as announced during the keynote, JavaFX should be fully open-sourced by the end of the year; contributions are welcome!. There is a strong momentum around JavaFX, it’s the ideal client solution for the Java platform. A client layer that works perfectly with GlassFish on the back-end. If you were not convince by JavaFX, it’s time to reconsider it! As an old Chinese proverb say “One tweet is worth a thousand words!” HTML5, Project Avatar and Java EE 7 HTML5 got a lot of airtime too, it was covered during the Java EE 7 section of the keynote. Some details about Project Avatar, Oracle’s incubator project for a TSA (Thin Server Architecture) solution, were diluted and shown during the keynote. On the tooling side, Project Easel running on NetBeans 7.3 beta was demo’ed, including a cool NetBeans debugging session running in Chrome! HTML 5, Project Avatar and Java EE 7 deserve separate posts... Feedback We need your feedback! There are many projects, JSRs and products cooking : GlassFish 4, Project Jigsaw, Concurrency Utilities for Java EE (JSR 236), OpenJFX, OpenJDK to name just a few. Those projects, those specifications will have a profound impact on the Java platform for the years to come! So if you have the opportunity, download, install, learn, tests them and give feedback! Remember, you can "Make the Future Java!" Finally, the traditional GlassFish Party at the Thirsty Bear concluded the first JavaOne day. This party is another place where the community can freely exchange with the GlassFish team in a more relaxed, more friendly (but sometime more noisy) atmosphere. Arun has posted a set of pictures to reflect the atmosphere of the keynotes and the GlassFish party. You can find more details on the others Java EE and GlassFish activities here.

    Read the article

  • Access Services in SharePoint Server 2010

    - by Wayne
    Another SharePoint Server 2010 feature which cannot go unnoticed is the Access Services. Access Services is a service in SharePoint Server 2010 that allows administrators to view, edit, and configure a Microsoft access application within a Web Browser. Access Services settings support backup and recovery, regardless of whether there is a UI setting in Central Administration. However, backup and recovery only apply to service-level and administrative-level settings; end-user content from the Access application is not backed up as part of this process. Access Services has Windows PowerShell functionality that can be used to provide the service that uses settings from a previous backup; configure and manage macro and query setting; manage and configure session management; and configure all the global settings of the service. Key Benefits of SharePoint Server Access Services Easier Access to right tools: The enhanced, customizable Ribbon in Access 2010 makes it easy to uncover more commands so you can focus on the end product. The new Microsoft Office BackstageTM view is yet another feature that can help you easily analyze and document your database, share, publish, and customize your Access 2010 experience, all from one convenient location. Helps build database effortlessly and quickly: Out-of-the box templates and reusable components make Access Services the fastest, simplest database solution available. It helps find new pre-built templates which you can start using without customization or select templates created by your peers in the Access online community and customize them to meet your needs. It builds your databases with new modular components. New Application Parts enable you to add a set of common Access components, such as a table and form for task management, to your database in a few simple clicks. Database navigation is now simplified. It creates Navigation Forms and makes your frequently used forms and reports more accessible without writing any code or logic. Create Impactful forms and reports: Whether it's an inventory of your assets or customer sales database, Access 2010 brings the innovative tools you'd expect from Microsoft Office. Access Services easily spot trends and add emphasis to your data. It quickly create coordinating database forms and reports and bring the Web into your database. Obtain a centralized landing pad for your data: Access 2010 offers easy ways to bring your data together and help increase work quality. New technologies help break down barriers so you can share and work together on your databases, making you or your team more efficient and productive. Add automation and complex expressions: If you need a more robust database design, such as preventing record deletion if a specific condition is met or if you need to create calculations to forecast your budget, Access 2010 empowers you to be your own developer. The enhanced Expression Builder greatly simplifies your expression building experience with IntelliSense®. With the revamped Macro Designer, it's now even easier for you to add basic logic to your database. New Data Macros allow you to attach logic to your data, centralizing the logic on the table, not the objects that update your data. Key features of Access Services 2010 - Access database content through a Web browser: Newly added Access Services on Microsoft SharePoint Server 2010 enables you to make your databases available on the Web with new Web databases. Users without an Access client can open Web forms and reports via a browser and changes are automatically synchronized. - Simplify how you access the features you need: The Ribbon, improved in Access 2010, helps you access commands even more quickly by enabling you to customize or create your own tabs. The new Microsoft Office Backstage view replaces the traditional File menu to provide one central, organized location for all of your document management tasks. - Codeless navigation: Use professional looking web-like navigation forms to make frequently used forms and reports more accessible without writing any code or logic. - Easily reuse Access items in other databases: Use Application Parts to add pre-built Access components for common tasks to your database in a few simple clicks. You can also package common database components, such as data entry forms and reports for task management, and reuse them across your organization or other databases. - Simplified formatting: By using Office themes you can create coordinating professional forms and reports across your database. Simply select a familiar and great looking Office theme, or design your own, and apply it to your database. Newly created Access objects will automatically match your chosen theme.

    Read the article

  • Updated Agenda for OTN Architect Day Los Angeles (Oct 25)

    - by Bob Rhubart
    Here's the latest information on the session schedule and content for Oracle Technology Network Architect Day in Los Angeles on October 25, 2012. Registration is open, but seating is limited. When: Thursday October 25 12, 2012 8:30am – 5:00pm Where: Sofitel Los Angeles 8555 Beverly Boulevard Los Angeles, CA 90048 Agenda Time Session Title Room 8:30 am - 9:00 am Registration and Continental Breakfast 9:00 am - 9:15 am Welcome and Opening Comments | Bob Rhubart Beverly Ballroom 9:15 am - 10:00 am Engineered Systems: Oracle's Vision for the Future | Ralf Dossmann Oracle's Exadata and Exalogic are impressive products in their own right. But working in combination they deliver unparalleled transaction processing performance with up to a 30x increase over existing legacy systems, with the lowest cost of ownership over a 3 or 5 year basis than any other hardware. In this session you'll learn how to leverage Oracle's Engineered Systems within your enterprise to deliver record-breaking performance at the lowest TCO. Beverly Ballroom 10:00 am - 10:30 am Monitoring and Managing Applications in the Cloud | Basheer Khan Oracle offers a broad portfolio of software and hardware products and services to enable public, private and hybrid clouds to power the enterprise. However, enterprise cloud computing presents new management challenges, that need to be addressed to realize the economic benefits of cloud computing. In this session you will learn about the methods and tools you can use to proactively monitor your end-to-end Oracle Applications environment in the cloud, define service-level objectives, gain insight into your end users, and troubleshoot performance problems from a single console. Beverly Ballroom 10:30 am - 10:45 am Break 10:45 am - 11:30 am Breakout Sessions (pick one) Cloud Computing - Making IT Simple | Dr. James Baty The road to Cloud Computing is not without a few bumps. This session will help to smooth out your journey by tackling some of the potential complications. We'll examine whether standardization is a prerequisite for the Cloud. We'll look at why refactoring isn't just for application code. We'll check out deployable entities and their simplification via higher levels of abstraction. And we'll close out the session with a look at engineered systems and modular clouds. Beverly Ballroom Innovations in Grid Computing with Oracle Coherence | Ashok Aletty Learn how Oracle Coherence can increase the availability, scalability and performance of your existing applications with its advanced low-latency data-grid technologies. Also hear some interesting industry-specific use cases that customers had implemented and how Oracle is integrating Coherence into its Enterprise Java stack. Hollywood Room 11:30 am - 12:15 pm Breakout Sessions (pick one) Enterprise Strategy for Cloud Security | Dave Chappelle Security is high on the list of concerns for many organizations as they evaluate their cloud computing options. This session will examine security in the context of the various forms of cloud computing. We'll consider technical and non-technical aspects of security, and discuss several strategies for cloud computing, from both the consumer and producer perspectives. Beverly Ballroom Oracle Enterprise Manager | Perren Walker This session examines new Oracle Enterprise Manager monitoring, administration, and management features for Oracle Exalogic. It focuses on two management themes: cloud management related to virtualization and applications-to-disk management. For private cloud management, it discusses virtualization management features providing an enhanced set of application deployment capabilities enabling IaaS as well as PaaS interactions. Then from an end-to-end perspective, it covers the specific capabilities and—where applicable—best practices for machine, cloud, middleware, and application administration. Hollywood Room 12:15 pm - 1:15 pm Lunch Beverly Ballroom Lounge 1:15 pm - 2:00 pm Panel Discussion - Q&A with session speakers Beverly Ballroom 2:00 pm - 2:45 pm Breakout Sessions (pick one) Oracle Cloud Reference Architecture | Anbu Krishnaswamy Cloud initiatives are beginning to dominate enterprise IT roadmaps. Successful adoption of Cloud and the subsequent governance challenges warrant a Cloud reference architecture that is applied consistently across the enterprise. This presentation will answer the important questions: What exactly is a Cloud, why you need it, what changes it will bring to the enterprise, and what are the key capabilities of a Cloud infrastructure are - using Oracle's Cloud Reference Architecture, which is part of the IT Strategies from Oracle (ITSO) Cloud Enterprise Technology Strategy ETS). Beverly Ballroom 21st Century SOA | Jeff Davies Service Oriented Architecture has evolved from concept to reality in the last decade. The right methodology coupled with mature SOA technologies has helped customers demonstrate success in both innovation and ROI. In this session you will learn how Oracle SOA Suite's orchestration, virtualization, and governance capabilities provide the infrastructure to run mission critical business and system applications. We'll also take a special look at the convergence of SOA & BPM using Oracle's Unified technology stack. Hollywood Room 2:45 pm - 3:00 pm Break 3:00 pm - 4:00 pm Roundtable Discussion Beverly Ballroom 4:00 pm - 4:15 pm Closing Comments & Readouts from Roundtables Beverly Ballroom 4:15 pm - 5:00 pm Networking / Reception Beverly Ballroom Lounge Note: Session schedule and content subject to change.

    Read the article

  • Silverlight Reporting Application Part 3.5 - Prism Background and WCF RIA [Series Intermission]

    Taking a step back before I dive into the details and full-on coding fun, I wanted to once again respond to a comment on my last post to clear up some things in regards to how I'm setting up my project and some of the choices I've made. Aka, thanks Ben. :) Prism Project Setup For starters, I'm not the ideal use case for a Prism application. In most cases where you've got a one-man team, Prism can be overkill as it is more intended for large teams who are geographically dispersed or in applications that have a larger scale than my Recruiting application in which you'll greatly benefit from modularity, delayed loading of xaps, etc. What Prism offers, though, is a manner for handling UI, commands, and events with the idea that, through a modular approach in which no parts really need to know about one another, I can update this application bit by bit as hiring needs change or requirements differ between offices without having to worry that changing something in the Jobs module will break something in, say, the Scheduling module. All that being said, here's a look at how our project breakdown for Recruit (MVVM/Prism implementation) looks: This could be a little misleading though, as each of those modules is actually another project in the overall Recruit solution. As far as what the projects actually are, that looks a bit like this: Recruiting Solution Recruit (Shell up there) - Main Silverlight Application .Web - Default .Web application to host the Silverlight app Infrastructure - Silverlight Class Library Project Modules - Silverlight Class Library Projects Infrastructure &Modules The Infrastructure project is probably something you'll see to some degree in any composite application. In this application, it is going to contain custom commands (you'll see the joy of these in a post or two down the road), events, helper classes, and any custom classes I need to share between different modules. Think of this as a handy little crossroad between any parts of your application. Modules on the other hand are the bread and butter of this application. Besides the shell, which holds the UI skeleton, and the infrastructure, which holds all those shared goodies, the modules are self-contained bundles of functionality to handle different concerns. In my scenario, I need a way to look up and edit Jobs, Applicants, and Schedule interviews, a Notification module to handle telling the user when different things are happening (i.e., loading from database), and a Menu to control interaction and moving between different views. All modules are going to follow the following pattern: The module class will inherit from IModule and handle initialization and loading the correct view into the correct region, whereas the Views and ViewModels folders will contain paired Silverlight user controls and ViewModel class backings. WCF RIA Services Since we've got all the projects in a single solution, we did not have to go the route of creating a WCR RIA Services Class Library. Every module has it's WCF RIA link back to the main .Web project, so the single Linq-2-SQL (yes, I said Linq-2-SQL, but I'll soon be switching to OpenAccess due to the new visual designer) context I'm using there works nicely with the scope of my project. If I were going for completely separating this project out and doing different, dynamically loaded elements, I'd probably go for the separate class library. Hope that clears that up. In the future though, I will be using that in a project that I've got in the "when I've got enough time to work on this" pipeline, so we'll get into that eventually- and hopefully when WCF RIA is in full release! Why Not use Silverlight Navigation/Business Template? The short answer- I'm a creature of habit, and having used Silverlight for a few years now, I'm used to doing lots of things manually. :) Plus, starting with a blank slate of a project I'm able to set up things exactly as I want them to be. In this case, rather than the navigation frame we would see in one of the templates, the MainRegion/ContentControl is working as our main navigation window. In many cases I will use theSilverlight navigation template to start things off, however in this case I did not need those features so I opted out of using that. Next time when I actually hit post #4, we're going to get into the modules and starting to get functionality into this application. Next week is also release week for the Q1 2010 release, so be sure to check out our annualWebinar Week (I might be biased, but Wednesday is my favorite out of the group). Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Developing Schema Compare for Oracle (Part 4): Script Configuration

    - by Simon Cooper
    If you've had a chance to play around with the Schema Compare for Oracle beta, you may have come across this screen in the synchronization wizard: This screen is one of the few screens that, along with the project configuration form, doesn't come from SQL Compare. This screen was designed to solve a couple of issues that, although aren't specific to Oracle, are much more of a problem than on SQL Server: Datatype conversions and NOT NULL columns. 1. Datatype conversions SQL Server is generally quite forgiving when it comes to datatype conversions using ALTER TABLE. For example, you can convert from a VARCHAR to INT using ALTER TABLE as long as all the character values are parsable as integers. Oracle, on the other hand, only allows ALTER TABLE conversions that don't change the internal data format. Essentially, every change that requires an actual datatype conversion has to be done using a rebuild with a conversion function. That's OK, as we can simply hard-code the various conversion functions for the valid datatype conversions and insert those into the rebuild SELECT list. However, as there always is with Oracle, there's a catch. Have a look at the NUMTODSINTERVAL function. As well as specifying the value (or column) to convert, you have to specify an interval_unit, which tells oracle how to interpret the input number. We can't hardcode a default for this parameter, as it is entirely dependent on the user's data context! So, in order to convert NUMBER to INTERVAL DAY TO SECOND/INTERVAL YEAR TO MONTH, we need to have feedback from the user as to what to put in this parameter while we're generating the sync script - this requires a new step in the engine action/script generation to insert these values into the script, as well as new UI to allow the user to specify these values in a sensible fashion. In implementing the engine and UI infrastructure to allow this it made much more sense to implement it for any rebuild datatype conversion, not just NUMBER to INTERVALs. For conversions which we can do, we pre-fill the 'value' box with the appropriate function from the documentation. The user can also type in arbitary SQL expressions, which allows the user to specify optional format parameters for the relevant conversion functions, or indeed call their own functions to convert between values that don't have a built-in conversion defined. As the value gets inserted as-is into the rebuild SELECT list, any expression that is valid in that context can be specified as the conversion value. 2. NOT NULL columns Another problem that is solved by the new step in the sync wizard is adding a NOT NULL column to a table. If the table contains data (as most database tables do), you can't just add a NOT NULL column, as Oracle doesn't know what value to put in the new column for existing rows - the DDL statement will fail. There are actually 3 separate scenarios for this problem that have separate solutions within the engine: Adding a NOT NULL column to a table without a rebuild Here, the workaround is to add a column default with an appropriate value to the column you're adding: ALTER TABLE tbl1 ADD newcol NUMBER DEFAULT <value> NOT NULL; Note, however, there is something to bear in mind about this solution; once specified on a column, a default cannot be removed. To 'remove' a default from a column you change it to have a default of NULL, hence there's code in the engine to treat a NULL default the same as no default at all. Adding a NOT NULL column to a table, where a separate change forced a table rebuild Fortunately, in this case, a column default is not required - we can simply insert the default value into the rebuild SELECT clause. Changing an existing NULL to a NOT NULL column To implement this, we run an UPDATE command before the ALTER TABLE to change all the NULLs in the column to the required default value. For all three, we need some way of allowing the user to specify a default value to use instead of NULL; as this is essentially the same problem as datatype conversion (inserting values into the sync script), we can re-use the UI and engine implementation of datatype conversion values. We also provide the option to alter the new column to allow NULLs, or to ignore the problem completely. Note that there is the same (long-running) problem in SQL Compare, but it is much more of an issue in Oracle as you cannot easily roll back executed DDL statements if the script fails at some point during execution. Furthermore, the engine of SQL Compare is far less conducive to inserting user-supplied values into the generated script. As we're writing the Schema Compare engine from scratch, we used what we learnt from the SQL Compare engine and designed it to be far more modular, which makes inserting procedures like this much easier.

    Read the article

  • Migrating R Scripts from Development to Production

    - by Mark Hornick
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 “How do I move my R scripts stored in one database instance to another? I have my development/test system and want to migrate to production.” Users of Oracle R Enterprise Embedded R Execution will often store their R scripts in the R Script Repository in Oracle Database, especially when using the ORE SQL API. From previous blog posts, you may recall that Embedded R Execution enables running R scripts managed by Oracle Database using both R and SQL interfaces. In ORE 1.3.1., the SQL API requires scripts to be stored in the database and referenced by name in SQL queries. The SQL API enables seamless integration with database-based applications and ease of production deployment. Loading R scripts in the repository Before talking about migration, we’ll first introduce how users store R scripts in Oracle Database. Users can add R scripts to the repository in R using the function ore.scriptCreate, or SQL using the function sys.rqScriptCreate. For the sample R script     id <- 1:10     plot(1:100,rnorm(100),pch=21,bg="red",cex =2)     data.frame(id=id, val=id / 100) users wrap this in a function and store it in the R Script Repository with a name. In R, this looks like ore.scriptCreate("RandomRedDots", function () { line-height: 115%; font-family: "Courier New";">     id <- 1:10     plot(1:100,rnorm(100),pch=21,bg="red",cex =2)     data.frame(id=id, val=id / 100)) }) In SQL, this looks like begin sys.rqScriptCreate('RandomRedDots',  'function(){     id <- 1:10     plot(1:100,rnorm(100),pch=21,bg="red",cex =2)     data.frame(id=id, val=id / 100)   }'); end; / The R function ore.scriptDrop and SQL function sys.rqScriptDrop can be used to drop these scripts as well. Note that the system will give an error if the script name already exists. Accessing R scripts once they’ve been loaded If you’re not using a source code control system, it is possible that your R scripts can be misplaced or files modified, making what is stored in Oracle Database to only or best copy of your R code. If you’ve loaded your R scripts to the database, it is straightforward to access these scripts from the database table SYS.RQ_SCRIPTS. For example, select * from sys.rq_scripts where name='myScriptName'; From R, scripts in the repository can be loaded into the R client engine using a function similar to the following: ore.scriptLoad <- function(name) { query <- paste("select script from sys.rq_scripts where name='",name,"'",sep="") str.f <- OREbase:::.ore.dbGetQuery(query) assign(name,eval(parse(text = str.f)),pos=1) } ore.scriptLoad("myFunctionName") This function is also useful if you want to load an existing R script from the repository into another R script in the repository – think modular coding style. Just include this function in the body of the other function and load the named script. Migrating R scripts from one database instance to another To move a set of functions from one system to another, the following script loads the functions from one R script repository into the client R engine, then connects to the target database and creates the scripts there with the same names. scriptNames <- OREbase:::.ore.dbGetQuery("select name from sys.rq_scripts where name not like 'RQG$%' and name not like 'RQ$%'")$NAME for(s in scriptNames) { cat(s,"\n") ore.scriptLoad(s) } ore.disconnect() ore.connect("rquser","orcl","localhost","rquser") for(s in scriptNames) { cat(s,"\n") ore.scriptDrop(s) ore.scriptCreate(s,get(s)) } Best Practice When naming R scripts, keep in mind that the name can be up to 128 characters. As such, consider organizing scripts in a directory structure manner. For example, if an organization has multiple groups or applications sharing the same database and there are multiple components, use “/” to facilitate the function organization: line-height: 115%;">ore.scriptCreate("/org1/app1/component1/myFuntion1", myFunction1) ore.scriptCreate("/org1/app1/component1/myFuntion2", myFunction2) ore.scriptCreate("/org1/app2/component2/myFuntion2", myFunction2) ore.scriptCreate("/org2/app2/component1/myFuntion3", myFunction3) ore.scriptCreate("/org3/app2/component1/myFuntion4", myFunction4) Users can then query for all functions using the path prefix when looking up functions. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Qt vs .NET - plz no n00bs who don't know wtf they're talking about [closed]

    - by Pirate for Profit
    Man in all these Qt vs. .NET discussions 90% these people don't know WTF they're talking about. Trying to get a real comparison chart going before we embark on a major fucking project. And yes I'm drunk, and yes I use cocaine. Event Handling In Qt the event handling system you just emit signals when something cool happens and then catch them in slots, for instance emit valueChanged(int percent, bool something); and void MyCatcherObj::valueChanged(int p, bool ok){} blocking them and disconnecting them when needed, doing it across threads... once you get the hang of it, it just seems a lot more natural and intuitive than the way the .NET event handling is set up (you know, object sender, CustomEventArgs e). And I'm not just talking about syntax, because in the end the .NET delegate crap is the bomb. I'm also talking about in more than just reflection (because, yes, .NET obviously has much stronger reflection capabilities). I'm talking about in the way the system feels to a human being. Qt wins hands down i m o. Basically, the footprints make more sense and you can visualize the project easier without the clunky event handling system. I wish I could it explain it better. The only thing is, I do love some of the ease of C# compared to C++ and .NET's assembly architecture. That is a big bonus for modular projects, which are a PITA to do in C++. Database Ease of Doing Crap Also what about datasets and database manipulations. I think .net wins here but I'm not sure. Threading/Conccurency How do you guys think of the threading? In .NET, all I've ever done is make like a list of master worker threads with locks. I like QConcurrentFramework, you don't worry about locks or anything, and with the ease of the signal slot system across threads it's nice to get notified about the progress of things. Memory Usage Also what do you think of the overall memory usage comparison. Is the .NET garbage collector pretty on the ball and quick compared to the instantaneous nature of native memory management? Or does it just let programs leak up a storm and lag the computer then clean it up when it's about to really lag? However, I am a n00b who doesn't know what I'm talking about, please school me on the subject.

    Read the article

  • Issue with dynamic array Queue data structure with void pointer

    - by Nazgulled
    Hi, Maybe there's no way to solve this the way I'd like it but I don't know everything so I better ask... I've implemented a simple Queue with a dynamic array so the user can initialize with whatever number of items it wants. I'm also trying to use a void pointer as to allow any data type, but that's the problem. Here's my code: typedef void * QueueValue; typedef struct sQueueItem { QueueValue value; } QueueItem; typedef struct sQueue { QueueItem *items; int first; int last; int size; int count; } Queue; void queueInitialize(Queue **queue, size_t size) { *queue = xmalloc(sizeof(Queue)); QueueItem *items = xmalloc(sizeof(QueueItem) * size); (*queue)->items = items; (*queue)->first = 0; (*queue)->last = 0; (*queue)->size = size; (*queue)->count = 0; } Bool queuePush(Queue * const queue, QueueValue value, size_t val_sz) { if(isNull(queue) || isFull(queue)) return FALSE; queue->items[queue->last].value = xmalloc(val_sz); memcpy(queue->items[queue->last].value, value, val_sz); queue->last = (queue->last+1) % queue->size; queue->count += 1; return TRUE; } Bool queuePop(Queue * const queue, QueueValue *value) { if(isEmpty(queue)) return FALSE; *value = queue->items[queue->first].value; free(queue->items[queue->first].value); queue->first = (queue->first+1) % queue->size; queue->count -= 1; return TRUE; } The problem lies on the queuePop function. When I call it, I lose the value because I free it right away. I can't seem to solve this dilemma. I want my library to be generic and modular. The user should not care about allocating and freeing memory, that's the library's job. How can the user still get the value from queuePop and let the library handle all memory allocs/frees?

    Read the article

  • Loading a Page into a jQuery Dialog

    - by Dave
    I tend to follow a fairly "modular" approach to building applications and I recently started working with jQuery. The application I'm working on is going to be fairly large so I'm trying to break pieces out into separate files/modules when possible. One example of this is a "User Settings" dialog. This dialog has a form, a few tabs, and quite a good number of input fields so I want to develop it in a separate HTML file (PHP actually, but it can be considered HTML for the purposes of this example). It's an entire page in and of itself with all the tags you would expect such as: <html><head></head><body></body></html> So I can now develop, what I want to be, the dialog separate from the base application. This dialog has it's own Javascript (A LOT of Javascript, in fact) in the head as well, with jQuery $(document).ready(){} capturing, etc. Everything works flawlessly in isolation. However, when I attempt to load the jQuery modal dialog with the page (inside of the main application page), as one might expect, trouble ensues. Here's a brief, very simple, example of what it looks like: editUserDialog.load ("editUser.php", {id : $('#userList').val(), popup : "true"}, function () { editUserDialog.dialog ("option", "title" , "Edit User"); editUserDialog.dialog ('open'); }); (I'm passing in a "popup" flag to the page so that the page can determine its context -- i.e. as a page or inside of the jQuery dialog). Question 1: When I moved the code from the "head" into "body" (in the editUser.php page) it actually worked for the most part. It seemed that jQuery was calling the $(document).ready() function in the context of the body of the loaded file and not the head. Is this a bad idea? Question 2: Is my process for building this application just totally flawed to begin with? I've scoured the net to attempt to find a "best practices" sort of document to building reasonably large applications using jQuery/PHP without a lot of success so maybe there's something out there someone else is aware of that I've somehow missed. Thanks for bearing with me while I attempt to describe the issues I've encountered and I hope I've accurately described the problem.

    Read the article

  • How to modularize a JSF/Facelets/Spring application with OSGi?

    - by lexicore
    I'm working with very large JSF/Facelets applications which use Spring for DI/bean management. My applications have modular structure and I'm currently looking for approaches to standardize the modularization. My goal is to compose a web application from a number of modules (possibly depending on each other). Each module may contain the following: Classes; Static resources (images, CSS, scripts); Facelet templates; Managed beans - Spring application contexts, with request, session and application-scoped beans (alternative is JSF managed beans); Servlet API stuff - servlets, filters, listeners (this is optional). What I'd like to avoid (almost at all costs) is the need to copy or extract module resources (like Facelets templates) to the WAR or to extend the web.xml for module's servlets, filters, etc. It must be enough to add the module (JAR, bundle, artifact, ...) to the web application (WEB-INF/lib, bundles, plugins, ...) to extend the web application with this module. Currently I solve this task with a custom modularization solution which is heavily based on using classpath resources: Special resources servlet serves static resources from classpath resources (JARs). Special Facelets resource resolver allows loading Facelet templates from classpath resources. Spring loads application contexts via the pattern classpath*:com/acme/foo/module/applicationContext.xml - this loads application contexts defined in module JARs. Finally, a pair of delegating servlets and filters delegate request processing to the servlets and filters configured in Spring application contexts from modules. Last days I read a lot about OSGi and I was considering, how (and if) I could use OSGi as a standardized modularization approach. I was thinking about how individual tasks could be solved with OSGi: Static resources - OSGi bundles which want to export static resources register a ResourceLoader instances with the bundle context. A central ResourceServlet uses these resource loaders to load resources from bundles. Facelet templates - similar to above, a central ResourceResolver uses services registered by bundles. Managed beans - I have no idea how to use an expression like #{myBean.property} if myBean is defined in one of the bundles. Servlet API stuff - use something like WebExtender/Pax Web to register servlets, filters and so on. My questions are: Am I inventing a bicycle here? Are there standard solutions for that? I've found a mentioning of Spring Slices but could not find much documentation about it. Do you think OSGi is the right technology for the described task? Is my sketch of OSGI application more or less correct? How should managed beans (especially request/session scope) be handled? I'd be generally graefult for your comments.

    Read the article

  • QT vs. Net - REAL comparisons for R.A.D. projects

    - by Pirate for Profit
    Man in all these Qt vs. .NET discussions 90% these people argue about the dumbest crap. Trying to get a real comparison chart here, because I know a little about both frameworks but I don't know everything. I believe Qt and .NET both have strengths and weaknesses. This is to make a comparison that highlights these so people can make more informed decisions before embarking on a project, in the spirit of R.A.D. Event Handling In Qt the event handling system is very simple. You just emit signals when something cool happens and then catch them in slots. ie. // run some calculations, then emit valueChanged(30, false, 20.2); and then catching it, any object can make a slot to recieve that message easily void MyObj::valueChanged(int percent, bool ok, float timeRemaining). It's easy to "block" an event or "disconnect" when needed, and works seamlessly across threads... once you get the hang of it, it just seems a lot more natural and intuitive than the way the .NET event handling is set up (you know, void valueChanged(object sender, CustomEventArgs e). And I'm not just talking about syntax, because in the end the .NET anonymous delegates are the bomb. I'm also talking about in more than just reflection (because, yes, .NET obviously has much stronger reflection capabilities). I'm talking about in the way the system feels to a human being. Qt wins hands down for the simplest yet still flexible event handling system ever i m o. Plugins and such I do love some of the ease of C# compared to C++, as well as .NET's assembly architecture, even though it leads to a bunch of .dll's (there's ways to combine everything into a single exe though). That is a big bonus for modular projects, which are a PITA to import stuff in C++ as far as RAD is concerned. Database Ease of Doing Crap Also what about datasets and database manipulations. I think .net wins here but I'm not sure. Threading/Conccurency How do you guys think of the threading? In .NET, all I've ever done is make like a list of master worker threads with locks. I like QConcurrentFramework, you don't worry about locks or anything, and with the ease of the signal slot system across threads it's nice to get notified about the progress of things. QConcurrent is the simplest threading mechanism I've ever played with. Memory Usage Also what do you think of the overall memory usage comparison. Is the .NET garbage collector pretty on the ball and quick compared to the instantaneous nature of native memory management? Or does it just let programs leak up a storm and lag the computer then clean it up when it's about to really lag? Doesn't the just-in-time compiler make native code that is pretty good, like and that only happens the first time the program is run? However, I am a n00b who doesn't know what I'm talking about, please school me on the subject.

    Read the article

  • while creating archetype getting following error

    - by munna
    D:\Training\workspace\vppsourcemvn archetype:generate -B -DarchetypeGroupId=org .appfuse.archetypes -DarchetypeArtifactId=appfuse-modular-struts-archetype -Darc hetypeVersion=2.1.0-M1 -DgroupId=com.vmware -DartifactId=vpp [INFO] Scanning for projects... [INFO] Searching repository for plugin with prefix: 'archetype'. [INFO] ------------------------------------------------------------------------ [INFO] Building Maven Default Project [INFO] task-segment: [archetype:generate] (aggregator-style) [INFO] ------------------------------------------------------------------------ [INFO] Preparing archetype:generate [INFO] No goals needed for project - skipping [INFO] [archetype:generate {execution: default-cli}] [INFO] Generating project in Batch mode [WARNING] Error reading archetype catalog http://repo1.maven.org/maven2 org.apache.maven.wagon.TransferFailedException: Error transferring file: Connect ion timed out: connect at org.apache.maven.wagon.providers.http.LightweightHttpWagon.fillInputD ata(LightweightHttpWagon.java:143) at org.apache.maven.wagon.StreamWagon.getInputStream(StreamWagon.java:11 6) at org.apache.maven.wagon.StreamWagon.getIfNewer(StreamWagon.java:88) at org.apache.maven.wagon.StreamWagon.get(StreamWagon.java:61) at org.apache.maven.archetype.source.RemoteCatalogArchetypeDataSource.ge tArchetypeCatalog(RemoteCatalogArchetypeDataSource.java:97) at org.apache.maven.archetype.DefaultArchetypeManager.getRemoteCatalog(D efaultArchetypeManager.java:195) at org.apache.maven.archetype.DefaultArchetypeManager.getRemoteCatalog(D efaultArchetypeManager.java:184) at org.apache.maven.archetype.ui.DefaultArchetypeSelector.getArchetypesB yCatalog(DefaultArchetypeSelector.java:278) at org.apache.maven.archetype.ui.DefaultArchetypeSelector.selectArchetyp e(DefaultArchetypeSelector.java:69) at org.apache.maven.archetype.mojos.CreateProjectFromArchetypeMojo.execu te(CreateProjectFromArchetypeMojo.java:186) at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPlugi nManager.java:490) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(Defa ultLifecycleExecutor.java:694) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeStandalone Goal(DefaultLifecycleExecutor.java:569) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(Defau ltLifecycleExecutor.java:539) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHan dleFailures(DefaultLifecycleExecutor.java:387) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegmen ts(DefaultLifecycleExecutor.java:284) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLi fecycleExecutor.java:180) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:328) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:138) at org.apache.maven.cli.MavenCli.main(MavenCli.java:362) at org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:6 0) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) Caused by: java.net.ConnectException: Connection timed out: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:529) at java.net.Socket.connect(Socket.java:478) at sun.net.NetworkClient.doConnect(NetworkClient.java:163) at sun.net.www.http.HttpClient.openServer(HttpClient.java:394) at sun.net.www.http.HttpClient.openServer(HttpClient.java:529) at sun.net.www.http.HttpClient.(HttpClient.java:233) at sun.net.www.http.HttpClient.New(HttpClient.java:306) at sun.net.www.http.HttpClient.New(HttpClient.java:323) at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLC onnection.java:860) at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConne ction.java:801) at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection .java:726) at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLCon nection.java:1049) at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:373 ) at org.apache.maven.wagon.providers.http.LightweightHttpWagon.fillInputD ata(LightweightHttpWagon.java:115) ... 28 more [WARNING] No archetype found in Remote catalog. Defaulting to internal Catalog [INFO] ------------------------------------------------------------------------ [ERROR] BUILD FAILURE [INFO] ------------------------------------------------------------------------ [INFO] [INFO] ------------------------------------------------------------------------ [INFO] For more information, run Maven with the -e switch [INFO] ------------------------------------------------------------------------ [INFO] Total time: 46 seconds [INFO] Finished at: Wed Jun 09 16:11:07 IST 2010 [INFO] Final Memory: 11M/28M [INFO] ------------------------------------------------------------------------

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15  | Next Page >