Search Results

Search found 311 results on 13 pages for 'opensuse'.

Page 12/13 | < Previous Page | 8 9 10 11 12 13  | Next Page >

• Power issues Foxconn Barebones kit

  - by alpha1

  I have a Foxconn R20D2 bought about a year and a half ago. It ran fine for a while and then around last summer it started having power issues. I chalked it up to changes in electric current due to the overwhelmed grid when people turn on their AC units, but this problem has stayed for all year, shutting off randomly, shutting off when i turn on a vacuum and similar problems. Now that its summer again, the box basically sits there all day cycling itself, and now has gotten to the point it tried to boot and after 3 seconds, fails, shuts off and tried again. I know its power related, it runs opensuse linux and there are never any shutdown logs or anything of that sort. As the weather got hotter i noticed it happening more and more, and it most often happened in the morning, i presume as people woke up and turn on the AC. The power supply is a Chennel well technology co LTD model DSL-150. 150W max output. Its an intel atom dual core, with 2 sata drives, no CD/floppy etc, recently upgrades from 2 to 4gb of ram. It runs at 104 degrees Fahrenheit all the time almost. Any way i can test the power supply or anything else to try to fix it? Im a software guy, not hardware so im at a complete loss here, thanks for all assistance you can provide! EDIT: The switch on the back that says 230 or 115 is set to 230. If im in the USA, could that be causing the problems?

  Read the article

• CD/DVD Drive not detecting locally burned CD/DVDs, but works fine with Genuine discs.

  - by Rahul

  I'm using Dell Inspiron 1420 - 32 Bit - Windows Vista, since 2.5 years. I'm facing a strange problem with my CD/DVD-drive. I cannot run/play a CD/DVD which I get burned from my friends. But when I insert Genuine CD, I'm able to play/run it. And when I try to install my Vista package which I got with my notebook, the CD/DVD gets loaded. If I insert a CD/DVD which I get from my friend, CD doesn't get loaded and the system gets hanged. But all these CDs/DVDs work on other systems. I've tested it on many of my friends PCs. So, now I'm able to run only genuine CDs & a few genuine DVDs. My Experience/Experiments: I tried to install Windows Vista using Genuine DVD - It worked I tried to install Ubuntu which I got from shipped from Canonical Ltd. - It worked I tried to install OpenSUSE .iso file burned to a DVD in my friend's PC - It didn't work for me (But working perfectly fine in my friends PCs(Tested in 4 other PCs) Tried to play a DVD containing movies, burned in my friend's PC - It didn't work for me (But working perfectly fine in my friends PCs Any help/suggestions would be appreciated. Thanks.

  Read the article

• samba access from win98

  - by SimonSalman

  Hello, the admin installed a new file server in our institute: OpenSuse 11.1 with Samba 3.2.7-11.3.2-2154-SUSE-CODE11. They copied the smb.conf from the old machine (hosting Samba 3.0.0) to the new one. Everything works as before, but one Windows 98 machine can see but not access the file server. It prompts for user authentication, but will not accept any user-password combination. There exists a lot of discussion about the problem on the net, but none provided a clear answer to the problem. EDIT: 1. I changed Win98 registry enable plain-text passwords, and alternatively changed server's smb.conf and /etc/smbpasswd to accept encrypted passwords 2. Further I provide a profile with a user-password combination on Win98 machine similar to one of the samba users-password combinations. 3. I changed smb.conf such that the samba server is the Local Master Browser all these changes are not necessary when using the older samba server. So, I conclude that a configuration problem on the server side is likely. If you need any further information, I will post them here. Best regards, Simon

  Read the article

• GNU screen, how to get current sessionname programmatically

  - by Jimm Chen

  [ This can be considered step 2 of my previous question Is it possible to change GNU screen session name after created? ] Actually, I'd like to write a script that can display current screen session name and change current session name. For example: sren armcross It will change the session name to armcross (ARM gcc cross compiler) and output something like: screen session name changed from '25278.pts-15.linux-ic37' to 'armcross' So, the key question now is how to get current session name. Not only for display the old session name, but according to Is it possible to change GNU screen session name after created? , I have to know it(pass to -d -r) before I can change it to something else. Can we use $STY for current session name? No. $STY will not change after you have changed the session name to a user-defined one. However, for command screen -d -r <oldsessname> -X sessionname armcross should be the user-defined name(if ever defined) instead of $STY, otherwise, screen spouts error "No screen session found." Maybe, there is a verbose way, use screen -list to list all sessions(user-defined name listed), then, match the pid part from $STY against those listed sessions and we will find current session's user-defined name. It should not be so verbose for such a straightforward question. Don't you think so? The -d -D and -r -R options seems to expose too much implementation detail to screen's user. It seems, to rename a session, you have to detach it, then do the rename, then reattach it. Right? My env: opensuse 11.3, GNU screen 4.00.03 (FAU) 23-Oct-06 Thank you.

  Read the article

• Windows 7 64 bit Installation freezes after a while durig the setup

  - by vinz243

  I have a windows 7 32 bits on my computer. Because i have 5 gb of ram (kingston) on my asus M2N motherboard and only 3 were able to be used, I bought W7 x64 and install it. It loads the wizard, but after a while, it freezes, and I have to force reboot. It first crashed while unzipping w7 files, but if I wait a while on the terms page for example, it can crash before, which make me think that it is a matter of time. I remember I had the same issue while booting on Ubuntu x64, it crashed randomly but not load completely. No bip or other messages. Configuration: Software OS (before) W7 x86 Pro New OS : W7 x64 Pro Antivirus : avast (bios verification ?) BIOS 03/27/2008 - v08.00.12 Hardware : Motherboard : Asus M2N Processor : AMD Athlon 64 dualcore @ 2.6 GHZ Memory : 5120 MB ((2 + 2) + (1)) NOTES : I ran a memory test using openSUSE cd, though i have not finished it, it ran. EDIT: I tried not to run the setup but wait, and i get the BSOD : A problem... TL;DW IRQL_NOT_LESS_OR_EQUAL If it is.. TL;DW ***STOP: 0x0000000A (0x0000000000000000,0x0000000000000002, 0x0000000000000001, 0xFFFFF8001A49ED1F)

  Read the article

• Can I disable the message line when launching ``screen -RR``

  - by Jimm Chen

  screen -RR is great. It does one of the two thing automatically: If there is any detached screen session, it picks up one can attach to it. If there is no detached screen session(no session yet, or all have been attach to other terminal), it creates a new screen session automatically. I use Windows server Remote Desktop a lot, screen -RR behaves almost the same when a client connects to a remote desktop server. It is natural and I like it. However, when screen -RR determines it should create a new session, it displays a message line at terminal bottom for 5 second. I'd like to suppress this message line because it brings us little benefit. In my opinion, a remote user can always easily distinguish whether he is connected to a resumed session(a piled-up display) or a newly created session(a clean display) from what he sees in the terminal window. So, is there a way to suppress the nag "New screen..." ? Just suppress that very one, not suppress message line globally. My env: opensuse 11.3, GNU screen 4.00.03 (FAU) 23-Oct-06

  Read the article

• Facter - custom fact, returns empty data set when invoked by Puppet agent

  - by user3684494

  According to this puppet labs article, I can create custom facts from shell scripts. I have created a bash script that returns a single fact, it is packaged in a modules facts.d directory. The module is included on the target system via an ENC class. When invoked by the puppet agent on the target it returns an empty set, when run by hand on the agent it correctly returns the fact. The script has execute permission on the master, but does not have it on the agent. I saw a bug report related to permissions and file types, but that was windows and supposed to be fixed in puppet version 3. What am I doing wrong? ENC definition: --- classes: facttest: Shell script: #!/bin/bash echo "test_fact1=$(hostname)" Permissions: master: -rwxr-xr-x 1 root root ... modules/facttest/facts.d/testfact.sh agent: -rw-r--r-- 1 root root ... /var/lib/puppet/facts.d/testfact.sh Agent message: Fact file /var/lib/puppet/facts.d/testfact.sh was parsed but returned an empty data set Version information: Puppet master: 3.5.1 (Debian) Facter master: 2.0.1 Puppet agent: 3.6.1 (OpenSUSE) Facter agent: 2.0.1

  Read the article

• Euro character messed up during FTP transfer

  - by djechelon

  My customer is using a very outdated ecommerce management system on my hosting service. For that product, no support is being provided anymore by the vendor. Brief explanation: the shop website, that claims to run under LAMP stack, is built by an old Visual Basic Windows application running on MS Access. The user constructs the shop, defines the HTML template, adds products and categories, etc. Then the VB exe builds the PHP pages (one for each template page) and the SQL script to run on MySQL. It also uploads everything via FTP and runs the installation/upgrade script on its own. The problem Browsing the website, many products' descriptions are cut before the euro sign. For example, what was supposed to be "Product price €1000" becomes "Product price" The analysis MySQL contains a cutted description until the € sign, so it's not PHP fault The Access databases contain full description with € sign, so it's not fault of the webmaster writing bad description or eDisplay cutting them The SQL that will run once the site gets uploaded, stored on my local machine before upload, contains the € sign The same script, after being FTPed by eDisplay and opened with nano from SSH, shows the € sign messed up like this: ^À vsftpd log reports (obfuscated for privacy) Sat Dec 15 11:16:57 2012 22 xxx.xxx.128.13 1112727 /srv/www/domains/xxxxxx.it/htdocs/db.sql b _ i r xxxxxxx ftp 0 * c which seems to be a binary transfer (and also a huge security vulnerability because you can download the whole database from unauthenticated HTTP) The eDisplay internal FTP client provides no option for ascii/binary transfer modes [Add] Trying to manually upload the SQL file via SFTP shows messing up euro [Add2] Trying to manually upload using Xftp client with explicit ASCII mode doesn't fix too It looks like the file gets uploaded as binary. Perhaps on the customer's previous host it all worked fine because that was a Windows host. The server It's an Azure virtual machine running openSUSE 12.2 with both vsftpd and openSSH The question Without asking the customer to manually upload files using FileZilla or replacing € with &euro;, because he refuses, what can I do on server side to prevent vsftpd to screw up euro sign?

  Read the article

• linux kernel buffer memory is zero

  - by user64772

  Hi all. There are one qestion that i can`t find in google. I have many linux boxes mostly with SLES or openSUSE, diffrent versions and kernels. On some of them i faced with slow oracle transactions problem. It time to time problem and when i log in the box on that time i see that oracle blocked in kernel function sync_page # while :; do ps axo stat,pid,cmd,wchan | egrep '^D|^R'; echo --; sleep 5; done D 3483 hald-addon-storage: polling ide_do_drive_cmd Ds 4635 ora_dbw0_orcl sync_page Ds 4637 ora_lgwr_orcl sync_page Ds 4639 ora_ckpt_orcl sync_page D 11210 oracleorcl (LOCAL=NO) sync_page D 12457 [smtpd] sync_page R+ 12458 ps axo stat,pid,cmd,wchan - -- Ds 4635 ora_dbw0_orcl sync_page Ds 4637 ora_lgwr_orcl sync_page Ds 4639 ora_ckpt_orcl sync_page D 11210 oracleorcl (LOCAL=NO) sync_page R+ 12501 ps axo stat,pid,cmd,wchan - -- Ds 4635 ora_dbw0_orcl sync_page Ds 4637 ora_lgwr_orcl sync_page Ds 4639 ora_ckpt_orcl sync_page D 11210 oracleorcl (LOCAL=NO) sync_page R+ 12535 ps axo stat,pid,cmd,wchan - -- Ds 4635 ora_dbw0_orcl sync_page Ds 4637 ora_lgwr_orcl sync_page Ds 4639 ora_ckpt_orcl sync_page D 11210 oracleorcl (LOCAL=NO) sync_page R+ 12570 ps axo stat,pid,cmd,wchan - -- so i think that box is run out of memory for disk buffers but memry is fine total used free shared buffers cached Mem: 4149084 3994552 154532 0 0 2424328 -/+ buffers/cache: 1570224 2578860 Swap: 3148700 750696 2398004 i think that this is the problem, buffer is zero and we must write directly to disk, but why buffer is zero ? - i try to google it and find nothing - is anyone can help ?

  Read the article

• This Week in Geek History: Gmail Goes Public, Deep Blue Wins at Chess, and the Birth of Thomas Edison

  - by Jason Fitzpatrick

  Every week we bring you a snapshot of the week in Geek History. This week we’re taking a peek at the public release of Gmail, the first time a computer won against a chess champion, and the birth of prolific inventor Thomas Edison. Gmail Goes Public It’s hard to believe that Gmail has only been around for seven years and that for the first three years of its life it was invite only. In 2007 Gmail dropped the invite only requirement (although they would hold onto the “beta” tag for another two years) and opened its doors for anyone to grab a username @gmail. For what seemed like an entire epoch in internet history Gmail had the slickest web-based email around with constant innovations and features rolling out from Gmail Labs. Only in the last year or so have major overhauls at competitors like Hotmail and Yahoo! Mail brought other services up to speed. Can’t stand reading a Week in Geek History entry without a random fact? Here you go: gmail.com was originally owned by the Garfield franchise and ran a service that delivered Garfield comics to your email inbox. No, we’re not kidding. Deep Blue Proves Itself a Chess Master Deep Blue was a super computer constructed by IBM with the sole purpose of winning chess matches. In 2011 with the all seeing eye of Google and the amazing computational abilities of engines like Wolfram Alpha we simply take powerful computers immersed in our daily lives for granted. The 1996 match against reigning world chest champion Garry Kasparov where in Deep Blue held its own, but ultimately lost, in a  4-2 match shook a lot of people up. What did it mean if something that was considered such an elegant and quintessentially human endeavor such as chess was so easy for a machine? A series of upgrades helped Deep Blue outright win a match against Kasparov in 1997 (seen in the photo above). After the win Deep Blue was retired and disassembled. Parts of Deep Blue are housed in the National Museum of History and the Computer History Museum. Birth of Thomas Edison Thomas Alva Edison was one of the most prolific inventors in history and holds an astounding 1,093 US Patents. He is responsible for outright inventing or greatly refining major innovations in the history of world culture including the phonograph, the movie camera, the carbon microphone used in nearly every telephone well into the 1980s, batteries for electric cars (a notion we’d take over a century to take seriously), voting machines, and of course his enormous contribution to electric distribution systems. Despite the role of scientist and inventor being largely unglamorous, Thomas Edison and his tumultuous relationship with fellow inventor Nikola Tesla have been fodder for everything from books, to comics, to movies, and video games. Other Notable Moments from This Week in Geek History Although we only shine the spotlight on three interesting facts a week in our Geek History column, that doesn’t mean we don’t have space to highlight a few more in passing. This week in Geek History: 1971 – Apollo 14 returns to Earth after third Lunar mission. 1974 – Birth of Robot Chicken creator Seth Green. 1986 – Death of Dune creator Frank Herbert. Goodnight Dune. 1997 – Simpsons becomes longest running animated show on television. Have an interesting bit of geek trivia to share? Shoot us an email to [email protected] with “history” in the subject line and we’ll be sure to add it to our list of trivia. Latest Features How-To Geek ETC Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? Clean Up Google Calendar’s Interface in Chrome and Iron The Rise and Fall of Kramerica? [Seinfeld Video] GNOME Shell 3 Live CDs for OpenSUSE and Fedora Available for Testing Picplz Offers Special FX, Sharing, and Backup of Your Smartphone Pics BUILD! An Epic LEGO Stop Motion Film [VIDEO] The Lingering Glow of Sunset over a Winter Landscape Wallpaper

  Read the article

• Microsoft Ergonomic 7000 keyboard + mouse lag

  - by user115210

  I recently bought a new Microsoft Ergonomic 7000 keyboard. I started to use it with my Ubuntu 12.04 and it lags all the time. I try to be more specific: Even on a minor CPU usage the mouse lags. By minor I mean firefox loading a webpage, or opening an application like conky, gnome-terminal etc. When higher CPU usage occurs the keyboard is lagging too, but by this I mean it misses my hits, so what I type won't appear later. What I tried so far (and did not work)? Disable autosuspend (echo -1 to sys/bus/usb.../autosuspend) and at the same place set level to "on". I have tried several video drivers: Vesa, radeon, newest catalyst (and catalyst beta too) When my keyboard and/or mouse lags I tried an other USB keyboard which works perfectly and the same for the mouse. I tried the keyboard and mouse on a different computer with Linux (Ubuntu, Arch, OpenSuse) too, the same problem appears but not on Windows. I tried to replace the battery sets, and to change channel on the dongle. And also tried to use the dongle from other USB ports. On the same time I am able to use any other wireless mouse. I changed the XkbModel to "microsoft7000" but it did not solve anything. About the hardware: AMD A8 3870K - Radeon HD6550D 8 GB of memory 4 GB of swap (which is almost never used) Here are my PC's details: lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 045e:071d Microsoft Corp. Bus 005 Device 002: ID 0461:4ea7 Primax Electronics, Ltd lspci: 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6550D] 00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [IDE mode] (rev 40) 00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:13.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:13.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] Hudson IDE Controller 00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11) 00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40) 00:14.5 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:15.0 PCI bridge: Advanced Micro Devices [AMD] Device 43a0 00:15.1 PCI bridge: Advanced Micro Devices [AMD] Device 43a1 00:16.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:16.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) dmesg | tail -n 150: http://pastebin.com/sGUAAiUe cat /var/log/Xorg.0.log: http://pastebin.com/fny7ZkN4 Note: The Icon7 Twister Evolution is the replacement mouse to use.

  Read the article

• PPPD Is Locking the Modem and Not Releasing It

  - by Skid

  Got an issue with PPPD on one of our system, we have a PC that is used to talk to remote sites via a dial up connection, the modem can both connect out to the sites and the sites also dial back in. Currently I'm having an issue where some times a site ether dials in or we dial out, and it connects, but then blocks the modem and throws and error to kern.log. Aug 26 14:23:57 TM-SCADA kernel: [191233.503745] INFO: task pppd:8142 blocked for more than 120 seconds. Aug 26 14:23:57 TM-SCADA kernel: [191233.503750] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 26 14:23:57 TM-SCADA kernel: [191233.503753] pppd D ffffffff8180cb40 0 8142 1 0x00000000 Aug 26 14:23:57 TM-SCADA kernel: [191233.503759] ffff8800ac1f5dc8 0000000000000086 ffff8800ac1f5fd8 00000000000137c0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503765] ffff8800ac1f4010 00000000000137c0 00000000000137c0 00000000000137c0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503770] ffff8800ac1f5fd8 00000000000137c0 ffffffff81c13020 ffff880135df5b80 Aug 26 14:23:57 TM-SCADA kernel: [191233.503775] Call Trace: Aug 26 14:23:57 TM-SCADA kernel: [191233.503784] [<ffffffff8166ba29>] schedule+0x29/0x70 Aug 26 14:23:57 TM-SCADA kernel: [191233.503790] [<ffffffff813db005>] tty_ldisc_ref_wait+0x65/0xb0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503796] [<ffffffff813f3061>] ? uart_ioctl+0xd1/0x1c0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503801] [<ffffffff81076960>] ? wake_up_bit+0x40/0x40 Aug 26 14:23:57 TM-SCADA kernel: [191233.503806] [<ffffffff813d3fa0>] tty_ioctl+0x2c0/0x9a0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503810] [<ffffffff811d0549>] ? fcntl_setlk+0x69/0x200 Aug 26 14:23:57 TM-SCADA kernel: [191233.503815] [<ffffffff81195f79>] do_vfs_ioctl+0x99/0x330 Aug 26 14:23:57 TM-SCADA kernel: [191233.503820] [<ffffffff81195212>] ? do_fcntl+0x232/0x410 Aug 26 14:23:57 TM-SCADA kernel: [191233.503823] [<ffffffff811962b1>] sys_ioctl+0xa1/0xb0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503829] [<ffffffff81674e69>] system_call_fastpath+0x16/0x1b The syslog trace stops at "Serial connection established". Aug 28 06:00:03 TM-SCADA pppd[10358]: pppd 2.4.5 started by root, uid 0 Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (NO CARRIER) Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (NO DIALTONE) Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (ERROR) Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (NO ANSWER) Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (BUSY) Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (Username/Password Incorrect) Aug 28 06:00:04 TM-SCADA chat[10360]: send (atz^M) Aug 28 06:00:04 TM-SCADA chat[10360]: expect (OK) Aug 28 06:00:04 TM-SCADA chat[10360]: atz^M^M Aug 28 06:00:04 TM-SCADA chat[10360]: OK Aug 28 06:00:04 TM-SCADA chat[10360]: -- got it Aug 28 06:00:04 TM-SCADA chat[10360]: send (atx0^M) Aug 28 06:00:04 TM-SCADA chat[10360]: expect (OK) Aug 28 06:00:04 TM-SCADA chat[10360]: ^M Aug 28 06:00:04 TM-SCADA chat[10360]: atx0^M^M Aug 28 06:00:04 TM-SCADA chat[10360]: OK Aug 28 06:00:04 TM-SCADA chat[10360]: -- got it Aug 28 06:00:04 TM-SCADA chat[10360]: send (atdt0123456789^M) Aug 28 06:00:04 TM-SCADA chat[10360]: expect (CONNECT/ARQ) Aug 28 06:00:04 TM-SCADA chat[10360]: ^M Aug 28 06:00:30 TM-SCADA chat[10360]: atdt0123456789^M^M Aug 28 06:00:30 TM-SCADA chat[10360]: CONNECT/ARQ Aug 28 06:00:30 TM-SCADA chat[10360]: -- got it Aug 28 06:00:30 TM-SCADA pppd[10358]: Serial connection established. I've only found two ways to release the modem in this condition, the first is to turn the modem off and on again, the second is to delete the serial lock file, and then SIGKILL pppd. Now I could write into our software to do the latter if the modem is locked, but I would rather stop it from locking in the first place if at all possible. The reason I put this issue in the askubuntu is because we used to use OpenSuse and never had an issue with it, admittedly that was version 11.2 or earlier so its still and old kernel, but I figured I would ask here first anyway. Any suggestions of places to look would be appreciated.

  Read the article

• Contributing to a Linux distribution

  - by Big Al

  I'm interested in contributing to a Linux distro, but regarding the various distro's developer communities, I'm having a bit of trouble figuring out which one I'd most like to join. What languages I know: C, C++, Lua, Python, and fairly familiar with Perl (though I wouldn't say I "know" it). In particular, I have very little experience with x86 assembly besides hacking stuff together for performance tweaks, though that will be partially rectified soon. What I'm looking for: A community that provides plenty of opportunities for developers to work on various aspects of the distribution. To be honest I'm most interested in reading and working on the kernel source (in which case the distro doesn't matter), but it's pretty daunting and I figure getting into the Linux community and working with experienced Linux developers might give me a better idea of how to jump into the guts(let me know if this is bogus, or if you have any advice regarding that). So... Which distro has the "best" developer community in terms of organization, people who are fun to work with, and opportunities to contribute? I've read various "Contributing to XXX" pages and mailing lists for distros like Ubuntu, OpenSuse, Fedora, etc. but I'd rather get a more personal testament from an actual developer.

  Read the article

• Running Hadoop example in psuedo-distributed mode on vm

  - by manas

  I have set-up Hadoop on a OpenSuse 11.2 VM using Virtualbox.I have made the prerequisite configs. I ran this example in the Standalone mode successfully. But in psuedo-distributed mode I get the following error: $./bin/hadoop fs -put conf input 10/04/13 15:56:25 INFO hdfs.DFSClient: Exception in createBlockOutputStream java.net.SocketException: Protocol not available 10/04/13 15:56:25 INFO hdfs.DFSClient: Abandoning block blk_-8490915989783733314_1003 10/04/13 15:56:31 INFO hdfs.DFSClient: Exception in createBlockOutputStream java.net.SocketException: Protocol not available 10/04/13 15:56:31 INFO hdfs.DFSClient: Abandoning block blk_-1740343312313498323_1003 10/04/13 15:56:37 INFO hdfs.DFSClient: Exception in createBlockOutputStream java.net.SocketException: Protocol not available 10/04/13 15:56:37 INFO hdfs.DFSClient: Abandoning block blk_-3566235190507929459_1003 10/04/13 15:56:43 INFO hdfs.DFSClient: Exception in createBlockOutputStream java.net.SocketException: Protocol not available 10/04/13 15:56:43 INFO hdfs.DFSClient: Abandoning block blk_-1746222418910980888_1003 10/04/13 15:56:49 WARN hdfs.DFSClient: DataStreamer Exception: java.io.IOException: Unable to create new block. at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream.nextBlockOutputStream(DFSClient.java:2845) at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream.access$2000(DFSClient.java:2102) at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream$DataStreamer.run(DFSClient.java:2288) 10/04/13 15:56:49 WARN hdfs.DFSClient: Error Recovery for block blk_-1746222418910980888_1003 bad datanode[0] nodes == null 10/04/13 15:56:49 WARN hdfs.DFSClient: Could not get block locations. Source file "/user/max/input/core-site.xml" - Aborting... put: Protocol not available 10/04/13 15:56:49 ERROR hdfs.DFSClient: Exception closing file /user/max/input/core-site.xml : java.net.SocketException: Protocol not available java.net.SocketException: Protocol not available at sun.nio.ch.Net.getIntOption0(Native Method) at sun.nio.ch.Net.getIntOption(Net.java:178) at sun.nio.ch.SocketChannelImpl$1.getInt(SocketChannelImpl.java:419) at sun.nio.ch.SocketOptsImpl.getInt(SocketOptsImpl.java:60) at sun.nio.ch.SocketOptsImpl.sendBufferSize(SocketOptsImpl.java:156) at sun.nio.ch.SocketOptsImpl$IP$TCP.sendBufferSize(SocketOptsImpl.java:286) at sun.nio.ch.OptionAdaptor.getSendBufferSize(OptionAdaptor.java:129) at sun.nio.ch.SocketAdaptor.getSendBufferSize(SocketAdaptor.java:328) at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream.createBlockOutputStream(DFSClient.java:2873) at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream.nextBlockOutputStream(DFSClient.java:2826) at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream.access$2000(DFSClient.java:2102) at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream$DataStreamer.run(DFSClient.java:2288) Any leads will be highly appreciated.

  Read the article

• Dynamic loading of shared objects using dlopen()

  - by Andy

  Hi, I'm working on a plain X11 app. By default, my app only requires libX11.so and the standard gcc C and math libs. My app has also support for extensions like Xfixes and Xrender and the ALSA sound system. But this feature shall be made optional, i.e. if Xfixes/Xrender/ALSA is installed on the host system, my app will offer extended functionality. If Xfixes or Xrender or ALSA is not there, my app will still run but some functionality will not be available. To achieve this behaviour, I'm not linking dynamically against -lXfixes, -lXrender and -lasound. Instead, I'm opening these libraries manually using dlopen(). By doing it this way, I can be sure that my app won't fail in case one of these optional components is not present. Now to my question: What library names should I use when calling dlopen()? I've seen that these differ from distro to distro. For example, on openSUSE 11, they're named the following: libXfixes.so libXrender.so libasound.so On Ubuntu, however, the names have a version number attached, like this: libXfixes.so.3 libXrender.so.1 libasound.so.2 So trying to open "libXfixes.so" would fail on Ubuntu, although the lib is obviously there. It just has a version number attached. So how should my app handle this? Should I let my app scan /usr/lib/ first manually to see which libs we have and then choose an appropriate one? Or does anyone have a better idea? Thanks guys, Andy

  Read the article

• Why does mmap() fail with ENOMEM on a 1TB sparse file?

  - by metadaddy

  I've been working with large sparse files on openSUSE 11.2 x86_64. When I try to mmap() a 1TB sparse file, it fails with ENOMEM. I would have thought that the 64 bit address space would be adequate to map in a terabyte, but it seems not. Experimenting further, a 1GB file works fine, but a 2GB file (and anything bigger) fails. I'm guessing there might be a setting somewhere to tweak, but an extensive search turns up nothing. Here's some sample code that shows the problem - any clues? #include <errno.h> #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/mman.h> #include <sys/types.h> #include <unistd.h> int main(int argc, char *argv[]) { char * filename = argv[1]; int fd; off_t size = 1UL << 40; // 30 == 1GB, 40 == 1TB fd = open(filename, O_RDWR | O_CREAT | O_TRUNC, 0666); ftruncate(fd, size); printf("Created %ld byte sparse file\n", size); char * buffer = (char *)mmap(NULL, (size_t)size, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if ( buffer == MAP_FAILED ) { perror("mmap"); exit(1); } printf("Done mmap - returned 0x0%lx\n", (unsigned long)buffer); strcpy( buffer, "cafebabe" ); printf("Wrote to start\n"); strcpy( buffer + (size - 9), "deadbeef" ); printf("Wrote to end\n"); if ( munmap(buffer, (size_t)size) < 0 ) { perror("munmap"); exit(1); } close(fd); return 0; }

  Read the article

• Linux HA cluster w/Xen, Heartbeat, Pacemaker. domU does not failover to secondary node

  - by Kendall

  I am having the followig problem with an OenSuSE + Heartbeat + Pacemaker + Xen HA cluster: when the node a Xen domU is running on is "dead" the Xen domU running on it is not restarted on the second node. The cluster is setup with two nodes, each running OpenSuSE-11.3, Heartbeat 3.0, and Pacemaker 1.0 in CRM mode. For storage I am using a LUN on an iSCSI SAN device; the LUN is formatted with OCFS2 and managed with LVM. The Xen domU has two logical volumes; one for root and the other for swap. I am using IPMI cards for STONITH devices, and a dedicated ethernet link for heartbeat communications. The ha.cf file is as follows: keepalive 1 deadtime 10 warntime 5 udpport 694 ucast eth1 auto_failback off node dhcp-166 node stage use_logd yes crm yes My resources look as follows: shocrm(live)configure# show node $id="5c1aa924-bba4-4f95-a367-6c9a58ac4a38" dhcp-166 node $id="cebc92eb-af24-4833-aaf0-672adf80b58e" stage primitive Xen-Util ocf:heartbeat:Xen \ meta target-role="Started" \ operations $id="Xen-Util-operations" \ op start interval="0" timeout="60" start-delay="0" \ op stop interval="0" timeout="120" \ params xmfile="/etc/xen/vm/xen-util" primitive my-stonith stonith:external/ipmi \ params hostname="dhcp-166" ipaddr="192.168.3.106" userid="ADMIN" passwd="xxx" \ op monitor interval="2m" timeout="60s" primitive my-stonith2 stonith:external/ipmi \ params hostname="stage" ipaddr="192.168.3.105" userid="ADMIN" passwd="xxx" \ op monitor interval="2m" timeout="60s" property $id="cib-bootstrap-options" \ dc-version="1.0.9-89bd754939df5150de7cd76835f98fe90851b677" \ cluster-infrastructure="Heartbeat" The Xen domU config file is as follows: name = "xen-util" bootloader = "/usr/lib/xen/boot/domUloader.py" #bootargs = "xvda1:/vmlinuz-xen,/initrd-xen" bootargs = "--entry=xvda1:/boot/vmlinuz-xen,/boot/initrd-xen" memory = 4096 disk = [ 'phy:vg_xen/xen-util-root,xvda1,w', 'phy:vg_xen/xen-util-swap,xvda2,w', ] root = "/dev/xvda1" vif = [ 'mac=00:16:3e:42:42:06' ] #vfb = [ 'type=vnc,vncunused=0,vnclisten=192.168.3.172' ] extra = "" Say domU "Xen-Util" is running on node "stage"; if "stage" goes down, "Xen-Util" does not restart on node "dhcp-166". It seems to want to try as an "xm list" will show it for a few seconds and if you "xm console xen-util" it will give a message like "copying /boot/kernel.gz from xvda1 to /var/lib/xen/tmp/kernel.a53gs for booting". However, it never gets past that, eventually gives up, and no longer appears in "xm list". Now, when node "stage" comes back online after being power cycled, it detects that "Xen-Util" isn't running, and starts it (on stage). I've tried starting "Xen-Util" on node "dhcp-166" without the cluster running, and it works fine. No problems. So, I know it works in that respect. Any ideas? Thanks!

  Read the article

• Detach current session and attach to another session, done with one script, can I?

  - by Jimm Chen

  After reading the vague official doc of GNU screen( http://www.gnu.org/software/screen/manual/screen.html ) and asking quite some questions at this site. I still cannot figure out how to accomplish such a task with a shell script. This task costs some words to describe. Assume I'm using PuTTY to telnet into my Linux server. ?STEP 1? Launch 2 telnet connections . From putty window 1 (PTWIN1),telnet into Linux Bash shell, execute screen -RR to launch a screen session, and get session name 21385.pts-4.linux-ic37 . From putty window 2 (PTWIN2), do that same as in PTWIN1, but this time, I get session name 22041.pts-9.linux-ic37 . Now, we have two screen sessions running simultaneously. We can check this: $ screen -ls There are screens on: 22041.pts-9.linux-ic37 (Attached) 21385.pts-4.linux-ic37 (Attached) 2 Sockets in /var/run/uscreens/S-chj2. ?STEP 2? Assume that for some reason, PTWIN1's TCP connection is lost abnormally(but server doesn't know that), and an urgent work is pending on session 21385 and I want to quickly regain control of it. Fortunately, we know the 21385 session is still there, so, I want to have PTWIN2 attach to session 21385. Because I hate to remember the esoteric screen option all the time, so I decide to write a script called sttach. I hope that sttach 21385.pts-4.linux-ic37 can let me attach to session 21385(for PTWIN2). Now, let's say sttach works well and I take control of 21385 on PTWIN2. ?STEP 3? Some minutes later. I want to go back to work on session 22041. Here, please allow me to have PTWIN2 remain associated with session 21385. What I would like to do is to launch another putty window (PTWIN3), telnet into server, and execute sttach 22041.pts-9.linux-ic37 in hope that I can resume session 22041 on PTWIN3 . You can see the benefit of sttach: as long as I know the target session name, I can call it to have my PuTTY window switch to that session, regardless whether the target session is "(Attached)" or "(Detached)", and regardless whether the running context is inside a screen session or not. Now the question: How to write the (Bash) script sttach? I mean, run screen with appropriate options in sttach to accomplish the goal. Waiting for your kind answer. Thank you. My previous questions regarding GNU screen: GNU screen, how to get current sessionname programmatically Is it possible to change GNU screen session name after created? How do I know I'm running inside a linux "screen" or not? My env: openSUSE Linux 11.3, GNU screen 4.00.03 (FAU) 23-Oct-06

  Read the article

• SSSD Authentication

  - by user24089

  I just built a test server running OpenSuSE 12.1 and am trying to learn how configure sssd, but am not sure where to begin to look for why my config cannot allow me to authenticate. server:/etc/sssd # cat sssd.conf [sssd] config_file_version = 2 reconnection_retries = 3 sbus_timeout = 30 services = nss,pam domains = test.local [nss] filter_groups = root filter_users = root reconnection_retries = 3 [pam] reconnection_retries = 3 # Section created by YaST [domain/mose.cc] access_provider = ldap ldap_uri = ldap://server.test.local ldap_search_base = dc=test,dc=local ldap_schema = rfc2307bis id_provider = ldap ldap_user_uuid = entryuuid ldap_group_uuid = entryuuid ldap_id_use_start_tls = True enumerate = False cache_credentials = True chpass_provider = krb5 auth_provider = krb5 krb5_realm = TEST.LOCAL krb5_kdcip = server.test.local server:/etc # cat ldap.conf base dc=test,dc=local bind_policy soft pam_lookup_policy yes pam_password exop nss_initgroups_ignoreusers root,ldap nss_schema rfc2307bis nss_map_attribute uniqueMember member ssl start_tls uri ldap://server.test.local ldap_version 3 pam_filter objectClass=posixAccount server:/etc # cat nsswitch.conf passwd: compat sss group: files sss hosts: files dns networks: files dns services: files protocols: files rpc: files ethers: files netmasks: files netgroup: files publickey: files bootparams: files automount: files ldap aliases: files shadow: compat server:/etc # cat krb5.conf [libdefaults] default_realm = TEST.LOCAL clockskew = 300 [realms] TEST.LOCAL = { kdc = server.test.local admin_server = server.test.local database_module = ldap default_domain = test.local } [logging] kdc = FILE:/var/log/krb5/krb5kdc.log admin_server = FILE:/var/log/krb5/kadmind.log default = SYSLOG:NOTICE:DAEMON [dbmodules] ldap = { db_library = kldap ldap_kerberos_container_dn = cn=krbContainer,dc=test,dc=local ldap_kdc_dn = cn=Administrator,dc=test,dc=local ldap_kadmind_dn = cn=Administrator,dc=test,dc=local ldap_service_password_file = /etc/openldap/ldap-pw ldap_servers = ldaps://server.test.local } [domain_realm] .test.local = TEST.LOCAL [appdefaults] pam = { ticket_lifetime = 1d renew_lifetime = 1d forwardable = true proxiable = false minimum_uid = 1 clockskew = 300 external = sshd use_shmem = sshd } If I log onto the server as root I can su into an ldap user, however if I try to console locally or ssh remotely I am unable to authenticate. getent doesn't show the ldap entries for users, Im not sure if I need to look at LDAP, nsswitch, or what: server:~ # ssh localhost -l test Password: Password: Password: Permission denied (publickey,keyboard-interactive). server:~ # su test test@server:/etc> id uid=1000(test) gid=100(users) groups=100(users) server:~ # tail /var/log/messages Nov 24 09:36:44 server login[14508]: pam_sss(login:auth): system info: [Client not found in Kerberos database] Nov 24 09:36:44 server login[14508]: pam_sss(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=/dev/ttyS1 ruser= rhost= user=test Nov 24 09:36:44 server login[14508]: pam_sss(login:auth): received for user test: 4 (System error) Nov 24 09:36:44 server login[14508]: FAILED LOGIN SESSION FROM /dev/ttyS1 FOR test, System error server:~ # vi /etc/pam.d/common-auth auth required pam_env.so auth sufficient pam_unix2.so auth required pam_sss.so use_first_pass server:~ # vi /etc/pam.d/sshd auth requisite pam_nologin.so auth include common-auth account requisite pam_nologin.so account include common-account password include common-password session required pam_loginuid.so session include common-session session optional pam_lastlog.so silent noupdate showfailed

  Read the article

• My own personal use of Oracle Linux

  - by wcoekaer

  It always is easier to explain something with examples... Many people still don't seem to understand some of the convenient things around using Oracle Linux and since I personally (surprise!) use it at home, let me give you an idea. I have quite a few servers at home and I also have 2 hosted servers with a hosted provider. The servers at home I use mostly to play with random Linux related things, or with Oracle VM or just try out various new Oracle products to learn more. I like the technology, it's like a hobby really. To be able to have a good installation experience and use an officially certified Linux distribution and not waste time trying to find the right libraries, I, of course, use Oracle Linux. Now, at least I can get a copy of Oracle Linux for free (even if I was not working for Oracle) and I can/could use that on as many servers at home (or at my company if I worked elsewhere) for testing, development and production. I just go to http://edelivery.oracle.com/linux and download the version(s) I want and off I go. Now, I also have the right (and not because I am an employee) to take those images and put them on my own server and give them to someone else, I in fact, just recently set up my own mirror on my own hosted server. I don't have to remove oracle-logos, I don't have to rebuild the ISO images, I don't have to recompile anything, I can just put the whole binary distribution on my own server without contract. Perfectly free to do so. Of course the source code of all of this is there, I have a copy of the UEK code at home, just cloned from https://oss.oracle.com/git/?p=linux-2.6-unbreakable.git. And as you can see, the entire changelog, checkins, merges from Linus's tree, complete overview of everything that got changed from kernel to kernel, from patch to patch, errata to errata. No obfuscating, no tar balls and spending time with diff, or go read bug reports to find out what changed (seems silly to me). Some of my servers are on the external network and I need to be current with security errata, but guess what, no problem, my servers are hooked up to http://public-yum.oracle.com which is open, free, and completely up to date, in a consistent, reliable way with any errata, security or bugfix. So I have nothing to worry about. Also, not because I am an employee. Anyone can. And, with this, I also can, and have, set up my own mirror site that hosts these RPMs. both binary and source rpms. Because I am free to get them and distribute them. I am quite capable of supporting my servers on my own, so I don't need to rely on the support organization so I don't need to have a support subscription :-). So I don't need to pay. Neither would you, at least not with Oracle Linux. Another cool thing. The hosted servers came (unfortunately) with Centos installed. While Centos works just fine as is, I tend to prefer to be current with my security errata(reliably) and I prefer to just maintain one yum repository instead of 2, I converted them over to Oracle Linux as well (in place) so they happily receive and use the exact same RPMs. Since Oracle Linux is exactly the same from a user/application point of view as RHEL, including files like /etc/redhat-release and no changes from .el. to .centos. I know I have nothing to worry about installing one of the RHEL applications. So, OL everywhere makes my life a lot easier and why not... Next! Since I run Oracle VM and I have -tons- of VM's on my machines, in some cases on my big WOPR box I have 15-20 VMs running. Well, no problem, OL is free and I don't have to worry about counting the number of VMs, whether it's 1, or 4, or more than 10 ... like some other alternatives started doing... and finally :) I like to try out new stuff, not 3 year old stuff. So with UEK2 as part of OL6 (and 6.3 in particular) I can play with a 3.0.x based kernel and it just installs and runs perfectly clean with OL6, so quite current stuff in an environment that I know works, no need to toy around with an unsupported pre-alpha upstream distribution with libraries and versions that are not compatible with production software (I have nothing against ubuntu or fedora or opensuse... just not what I can rely on or use for what I need, and I don't need a desktop). pretty compelling. I say... and again, it doesn't matter that I work for Oracle, if I was working elsewhere, or not at all, all of the above would still apply. Student, teacher, developer, whatever. contrast this with $349 for 2 sockets and oneguest and selfsupport per year to even just get the software bits.

  Read the article

• segfault on vector<struct>

  - by Andre

  Hello, I created a struct to hold some data and then declared a vector to hold that struct. But when I do a push_back I get damn segfault and I have no idea why! My struct is defines as: typedef struct Group { int codigo; string name; int deleted; int printers; int subpage; /*included this when it started segfaulting*/ Group(){ name.reserve(MAX_PRODUCT_LONG_NAME); } ~Group(){ name.clear(); } Group(const Group &b) { codigo = b.codigo; name = b.name; deleted = b.deleted; printers = b.printers; subpage = b.subpage; } /*end of new stuff*/ }; Originally, the struct didn't have the copy, constructor or destructor. I added them latter when I read this post below. http://stackoverflow.com/questions/676575/seg-fault-after-is-item-pushed-onto-stl-container but the end result is the same. There is one this that is bothering me as hell! When I first push some data into the vector, everything goes fine. Later on in the code when I try to push some more data into the vector, my app just segfaults! The vector is declared vector<Group> Groups and is a global variable to the file where I am using it. No externs anywhere else, etc... I can trace the error to: _M_deallocate(this->_M_impl._M_start, this->_M_impl._M_end_of_storage- this->_M_impl._M_start); in vector.tcc when I finish adding/copying the last element to the vector.... As far as I can tell. I shouldn't be needing anything to do with a copy constructor as a shallow copy should be enough for this. I'm not even allocating any space (but I did a reserve for the string to try out). I have no idea what the problem is! I'm running this code on OpenSuse 10.2 with gcc 4.1.2 I'm not really to eager to upgrade gcc because of backward compatibility issues... This code worked "perfectly" on my windows machine. I compiled it with gcc 3.4.5 mingw without any problems... help! --- ... --- :::EDIT::: I push data Group tmp_grp; (...) tmp_grp.name = "Nova "; tmp_grp.codigo=GetGroupnextcode(); tmp_grp.deleted=0; tmp_grp.printers=0; tmp_grp.subpage=0; Groups.push_back(tmp_grp);

  Read the article

• How can I limit the cache used by copying so there is still memory available for other cache?

  - by Peter

  Basic situation: I am copying some NTFS disks in openSuSE. Each one is 2TB. When I do this, the system runs slow. My guesses: I believe it is likely due to caching. Linux decides to discard useful cache (eg. kde4 bloat, virtual machine disks, LibreOffice binaries, Thunderbird binaries, etc.) and instead fill all available memory (24 GB total) with stuff from the copying disks, which will be read only once, then written and never used again. So then any time I use these apps (or kde4), the disk needs to be read again, and reading the bloat off the disk again makes things freeze/hiccup. Due to the cache being gone and the fact that these bloated applications need lots of cache, this makes the system horribly slow. Since it is USB,the disk and disk controller are not the bottleneck, so using ionice does not make it faster. I believe it is the cache rather than just the motherboard going too slow, because if I stop everything copying, it still runs choppy for a while until it recaches everything. And if I restart the copying, it takes a minute before it is choppy again. But also, I can limit it to around 40 MB/s, and it runs faster again (not because it has the right things cached, but because the motherboard busses have lots of extra bandwidth for the system disks). I can fully accept a performance loss from my motherboard's IO capability being completely consumed (which is 100% used, meaning 0% wasted power which makes me happy), but I can't accept that this caching mechanism performs so terribly in this specific use case. # free total used free shared buffers cached Mem: 24731556 24531876 199680 0 8834056 12998916 -/+ buffers/cache: 2698904 22032652 Swap: 4194300 24764 4169536 I also tried the same thing on Ubuntu, which causes a total system hang instead. ;) And to clarify, I am not asking how to leave memory free for the "system", but for "cache". I know that cache memory is automatically given back to the system when needed, but my problem is that it is not reserved for caching of specific things. Question: Is there some way to tell these copy operations to limit memory usage so some important things remain cached, and therefore any slowdowns are a result of normal disk usage and not rereading the same commonly used files? For example, is there a setting of max memory per process/user/file system allowed to be used as cache/buffers?

  Read the article

• Can't get IPv6 address using radvd on wireless interface on windows, wired works fine.

  - by AndrejaKo

  I set up my router to use OpenWRT and set it up to use IPv6 using a tunnel form SixXs. I'm having problems with stateless autoconfiguration using radvd. On my computer, wired connection can get its IPv6 address fine, but wireless can't. After spending some time on OpenWRT forums, I'm pretty much sure now that router is set up fine and that the problem is with my windows settings. Also, I do not have any problems getting IPv6 address on openSUSE 11.3. So what should I do to solve this and what information should I post? Here's radvdump output for wired interface: interface br-lan { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; prefix 2001:15c0:67d0::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition Here's radvdump output for wireless interface: # # radvd configuration generated by radvdump 1.6 # based on Router Advertisement from fe80::a0b7:deff:fef0:5b34 # received by interface br-lan # interface br-lan { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; prefix 2001:15c0:67d0::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition # # radvd configuration generated by radvdump 1.6 # based on Router Advertisement from fe80::a0b7:deff:fef0:5b34 # received by interface br-lan # interface br-lan { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; prefix 2001:15c0:67d0::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition

  Read the article

• How do bots access directories on a server that are not DocumentRoot of public IP address? How do I stop them?

  - by tmsimont

  I have a local network set up with apache2 and "named" running on OpenSuse 13.1 Linux. I used the "named" service to use my computer as a domain server. I set up my router to point to ask my computer for domain lookups, so I have a chance to have it rewrite a bunch of domains on my network to its own local IP, 192.168.0.111 This works great. I use virtual host configuration to allow various domains and subdomains (re-routed to the same IP via named) to pull up different directories in my computer. For example: <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias fmb.wa.net DocumentRoot /home/work/wa.net/fmb </VirtualHost> <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias postrecord.wa.net DocumentRoot /home/work/wa.net/postrecord </VirtualHost> <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias cvalley.wa.net DocumentRoot /home/work/wa.net/cvalley_local </VirtualHost> This makes it possible for me to hit cvalley.wa.net from any device in my network and get the site that lives in /home/work/wa.net/cvalley_local I decided to forward port 80 to this computer, so I could share a few development sites with coworkers. I can't control which site they see with the same named service, because they'd have to use my computer as their domain name server... So I added a line like this: <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias MY.IP.XXX.XX DocumentRoot /home/work/wa.net/cvalley </VirtualHost> Where "MY.IP.XXX.XX" is my public IP address. This works as expected, when you hit my IP address from a public network you see the site that lives in /home/work/wa.net/cvalley. The point of confusion that I have is that there are public IP addresses in my logs in other sites. I would have expected it to be impossible to access other sites in my network, unless the public user somehow figured out what I'm calling my ServerAliases, and is mimicing my domain set up... How can public traffic be hitting my other local sites? How can I recreate this kind of access? Here are some examples of public IP's hitting my VirtualHost sites: 162.253.66.76 - - [15/Aug/2014:19:20:47 -0600] "GET /xmlrpc.php HTTP/1.0" 404 1004 "-" "-" 162.253.66.74 - - [16/Aug/2014:10:50:28 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 185.4.227.194 - - [16/Aug/2014:11:16:45 -0600] "GET http://24x7-allrequestsallowed.com/?PHPSESSID=1rysxtj500143WQMVT%5E_NAZ%5BQ HTTP/1.1" 200 262 "-" "-" 101.226.254.138 - - [16/Aug/2014:13:32:14 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 162.253.66.74 - - [16/Aug/2014:14:26:19 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 212.129.2.119 - - [16/Aug/2014:16:00:51 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 91.240.163.111 - - [16/Aug/2014:18:34:32 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 162.253.66.74 - - [16/Aug/2014:19:02:53 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 122.226.223.69 - - [17/Aug/2014:05:53:09 -0600] "GET http://www.k2proxy.com//hello.html HTTP/1.1" 404 1006 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/6.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E)" ::1 - - [17/Aug/2014:10:19:26 -0600] "OPTIONS * HTTP/1.0" 200 - "-" "Apache/2.4.6 (Linux/SUSE) OpenSSL/1.0.1e PHP/5.4.20 (internal dummy connection)" 162.209.65.196 - - [17/Aug/2014:15:31:53 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 111.206.199.163 - - [18/Aug/2014:11:12:56 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 37.187.180.168 - - [18/Aug/2014:15:40:00 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 62.210.38.226 - - [18/Aug/2014:18:35:16 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" Is there anything that I can do to reliably deny public access by default, but allow it only in one VirtualHost?

  Read the article

• OpenCV install problems on Studio 12.04 - broken dependencies

  - by Will

  I'm trying to follow the Ubuntu OpenCV documentation at OpenCV. The provided script has a line which executed for some time, taking away more packages than I expected (such as ubuntu-studio video); sudo apt-get -qq remove ffmpeg x264 libx264-dev When the script gets to the line below, it bombs; sudo apt-get -qq install libopencv-dev build-essential checkinstall cmake pkg-config yasm libtiff4-dev libjpeg-dev libjasper-dev libavcodec-dev libavformat-dev libswscale-dev libdc1394-22-dev libxine-dev libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev libv4l-dev python-dev python-numpy libtbb-dev libqt4-dev libgtk2.0-dev libfaac-dev libmp3lame-dev libopencore-amrnb-dev libopencore-amrwb-dev libtheora-dev libvorbis-dev libxvidcore-dev x264 v4l-utils ffmpeg The error msg is; E: Unable to correct problems, you have held broken packages. I've since run Update-Manager, run sudo apt-get updates, rebooted, tried the above script line manually, and still no change. I've just run sudo apt-get install -f and nothing seemed to change. It did mention that some packages were no longer needed and could be removed by apt-get autoremove, so I ran that. It removed a number of packages, so I reran the install command above. Still same problem of held broken packages. I just ran sudo apt-get -u dist-upgrade Part of the response was; The following packages have been kept back: gstreamer0.10-ffmpeg I'm not sure what that means. I do know that it shows up in my Update-Manager and cannot be checked I then ran sudo dpkg --configure -a and then reran sudo apt-get -f install and the package was still not upgraded, though there was this very interesting comment; Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gstreamer0.10-ffmpeg : Depends: libavcodec53 (< 5:0) but it is not going to be installed or libavcodec-extra-53 (< 5:0) but 5:0.7.2-1ubuntu1+codecs1~oneiric2 is to be installed E: Unable to correct problems, you have held broken packages. Then I ran sudo apt-get -u dist-upgrade It showed I had one held package, so I ran; sudo apt-get -o Debug::pkgProblemResolver=yes dist-upgrade It also exited without upgrading the package, so I ran; sudo apt-get remove --dry-run gstreamer0.10-ffmpeg:i386 And it gave me; *The following packages will be REMOVED: arista gstreamer0.10-ffmpeg 0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded. Remv arista [0.9.7-3ubuntu1] Remv gstreamer0.10-ffmpeg [0.10.12-1ubuntu1]* But when I reran sudo apt-get -u dist-upgrade It showed the package was still there. *The following packages have been kept back: gstreamer0.10-ffmpeg 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.* Update: Just went into Synaptic PM and completely removed gstreamer0.10-ffmpeg Reran sudo apt-get -u dist-upgrade And was told; 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. However, when I ran the original apt-get to install opencv (first code at the top of this question), it still gave me the same broken package errors. So I tried $ cat /etc/apt/sources.list # # deb cdrom:[Ubuntu-Studio 11.10 _Oneiric Ocelot_ - Release i386 (20111011.1)]/ oneiric main multiverse restricted universe # deb cdrom:[Ubuntu-Studio 11.10 _Oneiric Ocelot_ - Release i386 (20111011.1)]/ oneiric main multiverse restricted universe # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://us.archive.ubuntu.com/ubuntu/ precise main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://us.archive.ubuntu.com/ubuntu/ precise-updates main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://us.archive.ubuntu.com/ubuntu/ precise universe deb-src http://us.archive.ubuntu.com/ubuntu/ precise universe deb http://us.archive.ubuntu.com/ubuntu/ precise-updates universe deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://us.archive.ubuntu.com/ubuntu/ precise multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ precise multiverse deb http://us.archive.ubuntu.com/ubuntu/ precise-updates multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://security.ubuntu.com/ubuntu precise-security main restricted deb-src http://security.ubuntu.com/ubuntu precise-security main restricted deb http://security.ubuntu.com/ubuntu precise-security universe deb-src http://security.ubuntu.com/ubuntu precise-security universe deb http://security.ubuntu.com/ubuntu precise-security multiverse deb-src http://security.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu oneiric partner ## Uncomment the following two lines to add software from Ubuntu's ## 'extras' repository. ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # deb http://extras.ubuntu.com/ubuntu oneiric main # deb-src http://extras.ubuntu.com/ubuntu oneiric main # deb http://download.opensuse.org/repositories/home:/popinet/xUbuntu_11.04 ./ # disabled on upgrade to precise and then; $ cat /etc/apt/sources.list.d/* But I don't have enough reputation to post the results here (it says I need at least 10 reputation points to post more than 2 links), so I don't know how to provide the requested feedback. Then tried; $ sudo apt-get check [sudo] password for <abcd>: Reading package lists... Done Building dependency tree Reading state information... Done However, no resolution of the problem yet. What else do I need to do? Will an upgrade to Ubuntu Studio 13.xx solve this problem (or compound it)?

  Read the article

< Previous Page | 8 9 10 11 12 13  | Next Page >