Search Results

Search found 14313 results on 573 pages for 'private clouds'.

Page 12/573 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Dynamic DNS on D-Link DWR-112 3G router uses a private IP address

  - by user270151

  I'm using a D-Link DWR-112 3G router to connect to the internet by using Celcom broadband plug-in. How can I do the port forwarding to my server? I already have correctly configured my DynDNS, but every time the DynDNS will not set to public address but local private address with in the range 10.xxx.xxx.xxx. My router address is 192.168.1.1 and server address is 192.168.1.5. Can someone give me some guideline about this issue?

  Read the article

• Virtual Private Hosting DNS configuration

  - by Ciel

  I did a great deal of reading here before posting this because I didn't want to post a duplicate - but I'm on a bit of a deadline and getting frustrated, so here goes... I very, very, very sincerely apologize if this is long winded or hard to read. Please - please just ask for any information or clarification and I will give it as quickly as I possibly can. This has become very frustrating to me and this is the last place I know to turn. I have no experience with setting up DNS, no experience with nameservers, and no peers to go to for help. So this is kind of my last ditch effort. The task of setting up a private server has, through circumstances beyond my control, fallen into my lap. I own a domain (hereafter referred to as yyy.com) and have always used shared hosting - I buy a package and just point it to the domain nameservers they give me. It's always been simple. yyy.com is registered with network solutions Now I have purchased a Virtual Private Hosting package from GoDaddy.com - and it comes with Plesk 11. I have no earthly idea how to begin to get the right nameserver for yyy.com. I have gone through the instructions and have wound up exceedingly frustrated. I have 2 IP addresses from GoDaddy for the server. This is what I have so far, and I cannot tell if it is working (Since propogation takes so long, it is extremely hard to test for me) IP 1 : XX.XX.XX.XX IP 2 : YY.YY.YY.YY (obviously hidden for privacy) Now after going through the documentation setup and waiting a few days, this is the setup I have - and so far it does not appear to be working. Host Record type Value XX.XX.XX.XX / 24 PTR yyy.com. yyy.com. NS ns1.yyy.com. yyy.com. A XX.XX.XX.XX yyy.com. MX (10) mail.yyy.com. ftp.yyy.com. CNAME yyy.com. ipv4.yyy.com. A XX.XX.XX.XX mail.yyy.com. A XX.XX.XX.XX mssql.yyy.com. A XX.XX.XX.XX ns1.yyy.com. A XX.XX.XX.XX ns2.yyy.com. A YY.YY.YY.YY webmail.yyy.com. A XX.XX.XX.XX www.yyy.com. CNAME yyy.com. yyy.com is pointing to both ns1.yyy.com and ns2.yyy.com Can anyone give me some assistance here? This is a learning experience for me and days of documentation have left me very confused.

  Read the article

• Discovering proxy servers on a private network

  - by AIB

  Suppose that I am in a private network of computers (say each having ip addresses 192.168.. ). Some of the machines( we have no information regarding their ip, name and no physical access to the servers) in the network are connected to internet and they run an http proxy at some port say 3128. Is there a program which can be run on Windows or Linux which will give me the list of machines(ip addresses and ports if possible) acting as proxy servers?

  Read the article

• How can the Private Bytes of a process be significantly less than its effect on the system commit charge?

  - by bacar

  On a 64-bit Windows Server 2003, I can see using taskmgr or process explorer that the total commit charge is around 3.5GB, yet when I sum the Private Bytes consumed by each process (by running pslist -m and adding all values under the Priv column) the total comes in at 1.6GB. I know which process seems to be causing this (sqlservr.exe) as when I kill the process, the commit charge drops dramatically. However the process in question is consuming only ~220MB of Private Bytes yet killing the process drops the commit charge by ~1.6GB. How is this possible? How can the commit charge be so significantly greater than Private Bytes, which should represent the amount of committed memory? If some other factor contributes to the commit charge, what is that factor and how can I view its impact in process explorer? Note: I claim that I understand the difference between reserved and committed memory already: my investigations above relate specifically to Private Bytes which includes only committed memory and excludes reserved memory. the Virtual Size of the process in this case is over 4GB, but this should be irrelevant - Virtual Size in procexp represents reserved, not committed memory, and should not contribute to the commit charge. I'm particularly interested in generalised answers to this question: I'm assuming that if sqlservr.exe can behave in this way, that any process potentially could. Further Investigations I notice that pointing Sysinternals VMMap at this process reports a committed "Private Data" of 1.6GB despite Procexp's reported a Private Bytes of 220MB. This is particularly strange given that the documentation for this field in the "Windows® Sysinternals Administrator's Reference" states that: Private Data memory is memory that is allocated by VirtualAlloc and that is not further handled by the Heap Manager or the .NET runtime, or assigned to the Stack category... VMMap’s definition of “Private Data” is more granular than that of Process Explorer’s “private bytes.” Procexp’s “private bytes” includes all private committed memory belonging to the process. i.e. that VMMap's committed "Private Data" should be smaller than procexp's "Private Bytes". Also, after reading the 'Process committed memory' section of Mark Russinovich's excellent Pushing the Limits of Windows: Virtual Memory, he highlights two cases which won't show up in Private Bytes: File mapping views with copy-on-write semantics (however, according to VMMap there is no significant space allocated to Mapped Files). pagefile-backed virtual memory (however, I tried testlimit with the -l flag as suggested, and no significant memory is consumed by pagefile-backed sections)

  Read the article

• SSH does not allow the use of a key with group readable permissions

  - by scjr

  I have a development git server that deploys to a live server when the live branch is pushed to. Every user has their own login and therefore the post-receive hook which does the live deployment is run under their own user. Because I don't want to have to maintain the users public keys as authorized keys on the remote live server I have made up a set of keys that 'belong's to the git system to add to remote live servers (In the post-receive hook I am using $GIT_SSH to set the private key with the -i option). My problem is that because of all the users might want to deploy to live, the git system's private key has to be at least group readable and SSH really doesn't like this. Here's a sample of the error: XXXX@XXXX /srv/git/identity % ssh -i id_rsa XXXXX@XXXXX @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: UNPROTECTED PRIVATE KEY FILE! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Permissions 0640 for 'id_rsa' are too open. It is required that your private key files are NOT accessible by others. This private key will be ignored. bad permissions: ignore key: id_rsa I've looked around expecting to find something in the way of forcing ssh to just go through with the connection but I've found nothing but people blindly saying that you just shouldn't allow access to anything but a single user.

  Read the article

• Filezilla/Puttygen doesn't recognize private key file

  - by devzoner

  I have generated a key for an Ubuntu Virtual Machine running on Azure Cloud Services http://www.windowsazure.com/en-us/manage/linux/how-to-guides/ssh-into-linux/ openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout myPrivateKey.key -out myCert.pem When loading the private key into Filezilla, it asks me to convert the format, however, when converting the key it fails, the same happens with puttygen from linux console, using this: puttygen myPrivateKey.key -o myKey.ppk In both cases I have the following error: puttygen: error loading `myPrivateKey.key': unrecognised key type By the way, this key doesn't have a passphrase. I found an old thread about it, but I'm using 0.6.3 version which is newer than what this thread recommends: http://fixunix.com/ssh/541874-puttygen-unable-import-openssh-key.html I've managed to solve this issue by using another gui client Fugu for Mac, but one of my co-worker uses windows and I still have to figure this out. Since Filezilla is the de-facto ftp client, I thought it would be easier to solve it there. Thanks

  Read the article

• tcpdump filter that excludes private ip traffic

  - by Kyle Brandt

  For a generic filter to exclude all traffic in my dump that is between private IP address, I came up with the following: sudo tcpdump -n ' (not ( (src net 172.16.0.0/20 or src net 10.0.0.0/8 or src net 192.168.0.0/16) and (dst net 172.16.0.0/20 or dst net 10.0.0.0/8 or dst net 192.168.0.0/16) ) ) and (not ( (dst net 172.16.0.0/20 or dst net 10.0.0.0/8 or dst net 192.168.0.0/16) and (src net 172.16.0.0/20 or src net 10.0.0.0/8 or src net 192.168.0.0/16) ) )' -w test2.dump Seems pretty excessive, but it also seems to work, is this filter a lot longer than it needs to be and there is better way to express this logic, or is there anything wrong with the filter?

  Read the article

• Using Static Public IPs and Private DHCP IPs on the Same Router

  - by Andrew Larsson

  I have a subnet of public IP addresses that my ISP has provided me with. They are routed through my router (how profound) that has a a static IP. I have successfully assigned the IPs from that subnet to various devices on my network. This works just fine, they get their own public IP, they can access the Internet, and the Internet can access them. However, I would like to also assign some private IPs on my network through that same router and put them behind NAT. Is this even possible? Could a VLAN be of use? I would like to avoid putting another router on the network, which makes this is quite an awkward question.

  Read the article

• Public IP Routing over Private GRE tunnel

  - by Paul

  I have a GRE tunnel configured between two linux boxes. The tunnel works fine. I can ping from each host the other private ip. Head privateip: 10.0.0.1 publicip: 8.8.8.8 Tail privateip: 10.0.0.2 publicip: 7.7.7.7 The public IP on Tail has the network block 9.9.9.0/23 statically routed over the 7.7.7.7 interface. The idea is to make the 9.9.9.0/23 ips work on servers on the 8.8.8.8 network. I configure the tail host to route the /23 block. I mounted a 9.9 IP on the head server. I can ping the 9.9 ip from the tail to the head. I can't ping the 9.9 ip from the public internet. I think I need to add some other routes because of gateway issues, but I can't seem to wrap my mind around it (not a router guy, just beating my way through something that I have never done before and vaguely understand) --danks

  Read the article

• How to separate Hyper-V Private network from the External network

  - by Ron Ratzlaff

  I am setting up a virtual test lab and I configured a domain controller VM running Windows 2008 R2 on my Hyper-V 2008 R2 server. I needed to download and install updates on it so I added an External NIC adapter and got that done. However, systems on my actual real physical domain were pulling IPs from this server and that was a big oopsy on my part so I immediately removed the External NIC adapter until I could find out how to go about keeping the Private and the External separate. If someone from the Server Fault community can help with this since I am pretty new to this, I would be very grateful. Thanks everyone.

  Read the article

• Private cloud solution [Eucalyptus,OpenStack, Nimbus] for Java deployments [Glassfish, Tomcat]

  - by Tadas D.

  I am interested in a way to have private cloud which would host Glassfish (or Tomcat) server. Which option from Eucalyptus, Openstack or Nimbus would be best to deploy java applications on it? Or maybe there is something other and I am looking wrong at the problem? The way I imagine this, that I should have some shared storage that I could expand by introducing new nodes to this cluster and have easy management for glassfish instances: something like virtual machines images that I can start and stop on demand and that image is shared among nodes. I don't need concrete step-by-step solution here but guidelines how this should be done are very welcome.

  Read the article

• Kerio group calendaring private/public functionality

  - by bsigrist

  We are considering a change of email servers and Kerio Connect is attractive. However, I am concerned about calendaring functionality. I found an old forum post that states the question well: "We want to create a single public calendar that everyone can see - using Windows XP/Outlook 2003/KOC 6.4.1. We want a way for people to put an entry in their own personal calendar and some how mark it so the entry auto add's or syncs with the public one. If an entry is private it wouldn't sync to the shared public calendar... Has anyone ever heard of a way to do this - in any way with any software?" This is a high priority feature, so if Kerio cannot do this, we may consider Exchange. Does Exchange provide functionality like that described?

  Read the article

• Best practice for assigning private IP ranges?

  - by Tauren

  Is it common practice to use certain private IP address ranges for certain purposes? I'm starting to look into setting up virtualization systems and storage servers. Each system has two NICs, one for public network access, and one for internal management and storage access. Is it common for businesses to use certain ranges for certain purposes? If so, what are these ranges and purposes? Or does everyone do it differently? I just don't want to do it completely differently from what is standard practice in order to simplify things for new hires, etc.

  Read the article

• Encrypt LAN and wifi traffic on small private network

  - by Grimlockz

  I need some advice about encrypt all traffic on a small private network running wi-fi and LAN traffic on 192.168.0.x network. The network would comprise of client laptops connecting to the wi-fi router (192.168.0.254) via ethernet connection or wireless. The main purpose of the server is for the client laptops to talk to two servers on different IP's (192.168.0.200 and 192.168.0.201) on ports 80 and 433. My main concern is having packet sniffers and what not getting access to the data. The only ways I see at the moment is to have VPN running on the network or use IPSec policy's to do this. Any other ways guys?

  Read the article

• Remote connection to dynamic public ip & private ip addresses

  - by user53864

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

• Finding a private (NAT) host's IP using historic destination data

  - by l0c0b0x

  The issue: An unknown private (NAT) client is infected with malware and it's trying to access a Bot server at random times/dates. How we know about this: We receive bot traffic notices/alerts from REN-ISAC. Unfortunately, we don't receive those until the next day after it has happened. What they provide to us is: The source address (of the firewall) The destination addresses (it varies, but they're going to network subnet allocated to a German ISP) The source port (which varies--dynamic ports). Question: What would be the best approach to finding this internal host (historically) with a Cisco ASA as firewall? I'm guessing blocking anything to the destination address(es), and logging that type of traffic/access might allow me to find the source host, but I'm not sure which tool/command would be the most useful. I've seen Netflow thrown into a few responses when it comes to logging, but I'm confused with it's association of Logging, NAL, and nBAR, and how they relate to Netflow.

  Read the article

• setting up a private network using linksys router

  - by user287745

  scenerio:- a database server running sql server 2005 and sql server management studio 2005 express editions a web server running IIS 5.0v using windows xp pro. two other computer having windows xp and windows 98 i have a linksys router which i use to access point for wireless (laptop) there are 5 sockets behind it four for clients and one for internet. i would like to setup a LAN- something like a private hosting area with two clients. would should i do? where to connect what and what would the changes in settnigs be. right now it uses dhcp or something to assign ips. where will the webserver be attached to the internet socket? where will the db server be attached? any guide, links, help thank you

  Read the article

• Multiple SSH private keys for the same host

  - by Sencha

  How can I store 2 different private SSH keys for the same host? I have tried 2 entries in /etc/ssh/ssh_config for the same host with the different keys, and I've also tried to put both keys in the same file and referencing it from one hosts setting, however both do not work. More detail: I'm running Ubuntu server (12.04) and I want to connect to GitHub via SSH to download the latest source for my projects. There are multiple projects running on the same server and each project has a GitHub repo with it's own unique deloyment key-pair. So the host is always the same (github.com) but the keys need to be different depending on which repo I'm using. Different /etc/ssh/ssh_config versions I have tried: Host github.com IdentityFile /etc/ssh/my_project_1_github_deploy_key StrictHostKeyChecking no Host github.com IdentityFile /etc/ssh/my_project_2_github_deploy_key StrictHostKeyChecking no and this with both keys in the same file: Host github.com IdentityFile /etc/ssh/my_project_github_deploy_keys StrictHostKeyChecking no I've had no luck with either. Any help would be greatly appreciated!

  Read the article

• private subnet nat (openvpn / racoon)

  - by Jonas Schnelli

  I have a openvpn subnet 10.8.0.0/24 running one server and one client (laptop). openvpn works fine. Browsing the web over openvpn from the laptop works also fine. Now on the server there is a private subnet with 10.7.8.128/28. The subnet is set up with racoon (IPSEC s2s vpn). The s2s vpn allows me to access the subnet 10.3.5.0/24 at the other s2s vpn end. Works all fine when I'm connected with ssh to my server. From my laptop i can ping 10.7.8.129 (the servers ipsec local ip) but i cannot reach the net 10.3.5.0/24. I tried to add a static route on my laptop 10.3.5.0/24 over gw 10.7.8.129 with no success. Any ideas how i do setup the nat / routing? Thanks

  Read the article

• Remote connection to dynamic public ip & private ip addresses

  - by user51737

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

• DSA private key format

  - by ansur

  So I used puttygen to generate a DSA private key and then exported that to the OpenSSH format and here's what I got when I ran OpenSSL's asn1parse on it: 0:d=0 hl=4 l= 443 cons: SEQUENCE 4:d=1 hl=2 l= 1 prim: INTEGER :00 7:d=1 hl=3 l= 129 prim: INTEGER :B9916796B7A3EFFD5CA36368186D0ED 193BE7FDD61CC6851174F3E9781A0C0CEA7473E528372F559A1DB2A7E049A9BEFAE2CAAC55527049 2A0CD55B59A48A53BCADD32181F519EA9E6A98EF8EF59DE314A2E69606C728F2F8DEE722B4C67BA6 8EB8A619B6006804F83740F9C74C38136522E7E83F22920AA39822FBDA0DF4D0B 139:d=1 hl=2 l= 21 prim: INTEGER :D832F5B01F075FEC0F162B91982F34D B26A0CC29 162:d=1 hl=3 l= 129 prim: INTEGER :9B73F47AEFF8E39584FD10ACF81CCD5 75C96FC5558A5C94B941EF76318D132007ACAE1EA22E95CE0B13FC7875CE4D4ED33BA639CD8C2AC9 C0A0530FB7786F584A62EBAE5985E1C26ED0D0B9FDD5E8DB0142BE182A4E5359307007060C327FEE C2F8D04EABB37D7B74076EB9BDB4885F627DE85708D5BDBF5177A05721E09A367 294:d=1 hl=3 l= 128 prim: INTEGER :6BD9267D2D1E4546EE05F6CD087F311 93C0EEB13B1E139F5072E900AB2EEF68EEC28BF4D7D6CAE4DEE59005F00BAE07343EE520C217FF6E 7880DC788E4555F78CCB5E89A10CDC71A663DA696C5BC34E296CEB3518D65A79BF00B6D592B1399A 9F0D79AE3F3FB445EE1F2B4B72515F036C8E1D5C7FAD336FD3503874645C5C264 425:d=1 hl=2 l= 20 prim: INTEGER :15295A12325E5F1A6F7243B7BB3BE74 6FE7B76E9 My question is... where is this format described? What does the first 0 integer value mean for example? I guess I could look in the puttygen source code but is there an RFC describing this format or something?

  Read the article

• We want to setup low cost private cloud [closed]

  - by Virtual Jasper

  We are a small company with very limit funds. In order to improve our server reliability, we are studying to migrate to CLOUD. We seen some CLOUD provider, they would charge by resources such as, CPU, RAM.....Disk space....High Availability....etc. We have server team, so we also consider to built the private CLOUD, we seen the Windows 8 server, it does need license fee. So we looking at Linux side, we look at Ubuntu and OpenStack. What is the different between Ubuntu and OpenStack solutions? Is it both free on software license? and only to pay the technical support.

  Read the article

• I can't Open my excel file in c#

  - by Ruben Guico

  Hi, Below is my code, i tried to open my excel file in my c# application but the program give's me an error message "Cannot Access "my excel.xls". But when I specify the file path in my string path variable it works, the problem is I need to get the file path from an openFileDialog. using System; using System.IO; using System.Collections.Generic; using System.Text; using System.Data; using System.Windows.Forms; using System.Data.OleDb; using System.Reflection; using MOIE = Microsoft.Office.Interop.Excel; using OFFICE = Microsoft.Office.Core; namespace EmpUploader { public class ExcelCon { private OleDbDataReader reader = null; private OleDbCommand excelCommand = new OleDbCommand(); private OleDbDataAdapter adapter = new OleDbDataAdapter(); private DataTable excelData = new DataTable(); private MOIE.ApplicationClass objExcel = new MOIE.ApplicationClass(); private MOIE.Workbook wb = null; private string myConn = ""; private string strSQL = ""; private string err = ""; private string path2 = ""; private int sheetCount = 0; private OleDbConnection Con = new OleDbConnection(""); #region "excel interop prarameters" private static object xl_missing = Type.Missing; private static object xl_true = true; private static object xl_false = false; private object xl_update_links = xl_missing; private object xl_read_only = xl_missing; private object xl_format = xl_missing; private object xl_password = xl_missing; private object xl_write_res_password = xl_missing; private object xl_ignore_read_only = xl_missing; private object xl_origin = xl_missing; private object xl_delimiter = xl_missing; private object xl_editable = xl_missing; private object xl_notify = xl_missing; private object xl_converter = xl_missing; private object xl_add_to_mru = xl_missing; private object xl_local = xl_missing; private object xl_corrupt_load = xl_missing; #endregion } //MY CODE FOR OPENING THE EXCEL //note that my file path came from an openfiledialog public void InitializeConnection(string path) { //connection string for excel myConn = @"Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" + path + "; Extended Properties =Excel 8.0"; Con.ConnectionString = myConn; Con.Open(); //this is the sample specified path that worked when i test my application //path = @"C:\shinetsu p5 emp list.xls"; objExcel.Visible = false; wb = objExcel.Workbooks.Open(path, xl_update_links, xl_read_only, xl_format, xl_password, xl_write_res_password, xl_ignore_read_only, xl_origin, xl_delimiter, xl_editable, xl_notify, xl_converter, xl_add_to_mru, xl_local, xl_corrupt_load); sheetCount = wb.Worksheets.Count; } }

  Read the article

• Moq Testing a private method .Many posts but still cannot make one example work

  - by devnet247

  Hi, I have seen many posts and questions about "Mocking a private method" but still cannot make it work and not found a real answer. Lets forget the code smell and you should not do it etc.... From what I understand I have done the following: 1) Created a class Library "MyMoqSamples" 2) Added a ref to Moq and NUnit 3) Edited the AssemblyInfo file and added [assembly: InternalsVisibleTo("DynamicProxyGenAssembly2")] [assembly: InternalsVisibleTo("MyMoqSamples")] 4) Now need to test a private method.Since it's a private method it's not part of an interface. 5) added the following code [TestFixture] public class Can_test_my_private_method { [Test] public void Should_be_able_to_test_my_private_method() { //TODO how do I test my DoSomthing method } } public class CustomerInfo { public string Name { get; set; } public string Surname { get; set; } } public interface ICustomerService { List<CustomerInfo> GetCustomers(); } public class CustomerService: ICustomerService { public List<CustomerInfo> GetCustomers() { return new List<CustomerInfo> {new CustomerInfo {Surname = "Bloggs", Name = "Jo"}}; } protected virtual void DoSomething() { } } Could you provide me an example on how you would test my private method? Thanks a lot

  Read the article

• Openconnect for Cisco VPN doesn't recognize private key file - asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag

  - by Alexander Skwar

  I'm trying to use my Synology DS212 NAS box also act as VPN gateway to my companies VPN. Sadly, they only use Cisco ASA and to complicate stuff even further, we've got to use personal certificates (which is of course more secure, but more complicate to get going…). So I compiled OpenConnect v4.06 from http://www.infradead.org/openconnect/. As a very basic test, I tried to build a connection by manually invoking openconnect, passing along the key and cert files, like so: /lib/ld-linux.so.3 --library-path /opt/lib \ /opt/openconnect/sbin/openconnect \ --certificate=$VPN_CFG/alexander.crt \ --sslkey=$VPN_CFG/alexander.key \ --cafile=$VPN_CFG/Company_VPN_CA.crt \ --user=alexander --verbose <ip>:443 It fails :( Attempting to connect to <ip>:443 Using certificate file $VPN_CFG/alexander.crt Using client certificate '/[email protected]/OU=Company VPN' 5919:error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag:tasn_dec.c:1315: Loading private key failed (see above errors) Loading certificate failed. Aborting. Failed to open HTTPS connection to <ip> Failed to obtain WebVPN cookie When I run the same command with the same cert/key files on a Ubuntu 12.04 box, it works: openconnect \ --certificate=$VPN_CFG/alexander.crt \ --sslkey=$VPN_CFG/alexander.key \ --cafile=$VPN_CFG/Company_VPN_CA.crt \ --user=alexander --verbose <ip>:443 Attempting to connect to <ip>:443 Using certificate file $VPN_CFG/alexander.crt Extra cert from cafile: '/CN=Company AG VPN CA/O=Company AG/L=Zurich/ST=ZH/C=CH' SSL negotiation with <ip> Server certificate verify failed: self signed certificate Certificate from VPN server "<ip>" failed verification. Reason: self signed certificate Enter 'yes' to accept, 'no' to abort; anything else to view: yes Connected to HTTPS on <ip> GET https://<ip>/ […] Well… The error on the NAS is this: 5919:error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag:tasn_dec.c:1315: Any ideas, what's causing this? On Syno, I use OpenConnect 4.06. On Ubuntu, I just compiled and installed to a custom location OpenConnect 4.06 as well. Thanks, Alexander

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >