Search Results

Search found 920 results on 37 pages for 'rev'.

Page 12/37 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • Freezes if desktop effects is used.

    - by munir
    I have found that using desktop effects in Ubuntu versions later than 8.10 causes the desktop to freeze after a few seconds on my PC. the command lspci -nn gave the following 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) and with lspci -k I have 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) Kernel driver in use: i915 Kernel modules: i915 The intel graphics cards seems to have some performence issues with xorg driver. However I have not noticed any freeze in Ubuntu 8.10. There are some workarounds at https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes to make them work. But I can't find out what workaround should I do with my graphics controller. I have tried workaround F but it did not help. can anyone help me find a workaround for my graphics card? and is it actually possible to use desktop effect in this graphics card ?

    Read the article

  • Dynamic Bind9 + DHCP

    - by AcidRod75
    i have been working on setup a server for my internal network, so far i have a working isc-dhcp-server that can upgrade a chrooted BIND9 (on the same machine), i need to add some static entries on the DNS, so users can resolve the websites that resides in our DMZ. What i had tryed all ready was to modify the /etc/bind/named.conf.local with this info: // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; key DHCP_UPDATER { algorithm HMAC-MD5.SIG-ALG.REG.INT; secret "MySuperSecretHash"; (this is not the real value BTW) }; zone "quality.internal" IN { type master; file "/var/lib/bind/quality.internal.db"; allow-update { key DHCP_UPDATER; }; }; zone "0.10.10.in-addr.arpa" { type master; file "/var/lib/bind/rev.10.10.0.in-addr.arpa"; allow-update { key DHCP_UPDATER; }; }; logging { channel query.log { file "/var/log/named/query.log"; severity debug 3; }; category queries { query.log; }; }; --- EOF ---- then i added this 2 entries: zone "ourserver.internal" IN { type master; file "/var/lib/bind/ourserver.internal.db"; }; zone "0.16.172.in-addr.arpa" { type master; file "/var/lib/bind/rev.172.16.0.in-addr.arpa"; }; ---- EOF ---- So.. i created the files ourserver.internal.db and rev.172.16.0.in-addr.arpa placed them BOTH in /var/lib/bind/ and changed the permisions so the bind user can access them, restated the service... when i do a NSLOOKUP www.ourserver.internal i get: Server: 127.0.0.1 Address: 127.0.0.1#53 ** server can't find www.ourserver.internal: NXDOMAIN BUT when i do a reverse lookup.... Server: 127.0.0.1 Address: 127.0.0.1#53 5.0.16.172.in-addr.arpa name = www.ourserver.internal I do not understand what's wrong. Some help with this will save me from installing a new DNS server at the DMZ JUST to host internal site names- TY in advance BTW: the server i'm using has Ubuntu Server 11.10 fully patched.

    Read the article

  • Wireless not connecting on Ubuntu 13.10, Toshiba Satellite pro L 650

    - by user204842
    I have just installed Ubuntu 13.10 on my Toshiba Satellite Pro L650. After several reboots, installing/ uninstalling the broadcom driver I still can't connect. It detects the wi fi signals and the icon flashes as if it's trying to connect but never actually does. I'm really quite rubbish with code and stuff, but I really like Ubuntu as an OS and would really appreciate any suggestions anyone can offer! 02:00.0 Ethernet controller: Qualcomm Atheros AR8151 v1.0 Gigabit Ethernet (rev c0) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)

    Read the article

  • Slow wireless about 1/3 bandwidth of wired from cable modem

    - by Rhino
    HP DV6000 Wireless G Broadcom Netgear WNDR3400 router properly configured. Windows laptops using wireless G and N are considerably faster than mine. 12.04 LTS, all restricted drivers and all up to date. 50Mbps wired and 9-21 Mbps wireless on Ubuntu. 00:14.0 Bridge [0680]: NVIDIA Corporation MCP51 Ethernet Controller [10de:0269] (rev a3) Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7] Kernel driver in use: forcedeth 03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11a/b/g [14e4:4312] (rev 02) Subsystem: Hewlett-Packard Company Broadcom 802.11a/b/g WLAN [103c:1370] Kernel driver in use: wl

    Read the article

  • Trouble with 12.10 lag

    - by Brennan
    Well basicly lately I have been having lag problems with 12.10. I will post my specs, but before the update to 12.10, it said that I had intel graphics. Now it says I have Gallium. My specs: *Memory: 3.9 GiB *Processor: Pentium(R) Dual-Core CPU E5500 @ 2.80GHz × 2 *Graphics: Gallium 0.4 on llvmpipe (LLVM 3.2, 128 bits) (used to say intel graphics) *OS Type: 32-bit *Disk: 486.1 GB The output of the command sudo apt-cache check is this: E: Invalid operation check The output of the command sudo lspci -nnk | grep -A5 VGA is this: 00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e32] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:836d] Kernel driver in use: i915 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: ASUSTeK Computer Inc. Device [1043:8445] Kernel driver in use: snd_hda_intel

    Read the article

  • video/audio output via HDMI Ubuntu 12.04

    - by lostNfound
    I've been out of the Ubuntu loop for quite a while now and have a completely new laptop now. Just installed Ubuntu 12.04 64-bit and would like to output my video and my audio via HDMI to my television. the following is the lspci | grep VGA for my computer. please tell me if there is any additional information needed and preferably how to obtain it and i will be more than happy to oblige. thank you in advance for your time and assistance in this matter. 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) Edit: every time i restart my computer, after a short moment, i get an error message stating something along the lines "sorry, jockey needed to close unexpectedly." after researching, i discovered jockey is the name of the "additional drivers," which after initial installation, ubuntu informed me of proprietary drivers available. those are no longer available, and this error continues to occur.

    Read the article

  • Wireless always disconnect

    - by Silas
    I upgraded my Ubuntu 10.10 for Ubuntu 12.04. I have a Emachines E625 With Ubuntu 12.04 my wireless always disconnects every 10 sec. It didn't do that with 10.10. Here is my config: Linux sylvain-eMachines-E625 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:54:40 UTC 2012 i686 athlon i386 GNU/Linux total used free shared buffers cached Mem: 1759 1425 333 0 46 925 -/+ buffers/cache: 452 1306 Swap: 1788 0 1788 02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 05:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) I will really enjoy an answer to solve this problem. Thank you in advance! Silas

    Read the article

  • Wireless Not Working with Drivers Installed

    - by Haoran
    I'm new to Linux. I installed Ubuntu 12.10 on my old Compaq/Hp Preario V3000 to replace Windows XP. Every thing works fine except I'm getting no wireless network options in the network drop down menu. I'm using a cable at the moment. Wirless chipset is: 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) 08:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 02) I ran rfkill: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no I also ran iwconfig and got this lo no wireless extensions. eth0 no wireless extensions. In the additional drivers it says: "Using Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source (proprietary)" Any help to resolve the problem would be greatly appreciated.

    Read the article

  • Freezes if desktop effects is used [closed]

    - by munir
    I have found that using desktop effects in Ubuntu versions later than 8.10 causes the desktop to freeze after a few seconds on my PC. the command lspci -nn gave the following 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) and with lspci -k I have 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) Kernel driver in use: i915 Kernel modules: i915 The intel graphics cards seems to have some performence issues with xorg driver. However I have not noticed any freeze in Ubuntu 8.10. There are some workarounds at https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes to make them work. But I can't find out what workaround should I do with my graphics controller. I have tried workaround F but it did not help. can anyone help me find a workaround for my graphics card? and is it actually possible to use desktop effect in this graphics card ?

    Read the article

  • Why doesn't Unity 3D work on my HD3000 integrated graphics?

    - by Zatsugami
    So I got my new laptop recently. HP Envy 15 with switchable graphics card. I'm using both windows and ubuntu, but for ubuntu I need just Intel HD3000 for better battery live. I've installed fglrx-updates and fglrx-amdcccle-updates. The drivers seems to work for my ATI card. The problem is, Intel HD3000 does not support Unity 3D. Why? My older Intel GMA 4500 did this. lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] (rev ff)

    Read the article

  • ubuntu 13.10 secondary monitor - doesn't redraw properly

    - by Daniel
    Hi I've just installed Ubuntu 13.10 on a Lenovo w350 and am having some issues with graphics driver. standard nouveau drivers work great on the laptop display but when I attach an external display it goes bad on the external monitor, seems it's not re-drawing properly. (Photo attached). I've tried other drivers but none of them detect the external monitor when connected. Any ideas? 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1) screenshot of effected monitor -- http://i.imgur.com/UZWMpQO.jpg UPDATE 1: I have noticed that if I leave the System Monitor open the display improves. Wierd. UPDATE 2: If I leave a video going the lag/flicker issues stop.

    Read the article

  • gt 555m instead of gt540m

    - by gangov
    Im gonna be really short. My Acer Aspire 5755G lap top has a Nvidia geforce gt 540m. But when i start lspci | grep VGA it shows me the following: ^[[Agangov@gangov-Aspire-5755G:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M] (rev a1) Im really not familiar with the additional drivers in ubuntu. Can somebody tell me what should i do you my VGA properly?? Thank you in advance.

    Read the article

  • Fan working non-stop on a Dell Inspiron 5110

    - by cankemik
    First of all i'm new at ubuntu. I've only tried 11.10 before 12.04. Since then my notebook's(Dell Insprion 5110) fan was working non-stop. And also battery lasts in 2 hours. So i made a research. Some said it's about graphics card driver. I've tried so many things, so many codes but i get no result. I must say that i've tried ironhide and bumblebee. non of them worked 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff)

    Read the article

  • How to get wireless and wired network working again on my Dell Inspiron 1501?

    - by Angelo Daul
    My wireless doesn't work with Ubuntu 12.04.(it worked with 10.04 LTS) I have a Dell Inspiron 1501. I followed the steps posted below:(from a similar tag, but...) sudo apt-get install --reinstall bcmwl-kernel-source broadcom-sta-common broadcom-sta-source echo "blacklist brcmsmac" | sudo tee -a /etc/modprobe.d/blacklist.conf echo "blacklist bcma" | sudo tee -a /etc/modprobe.d/blacklist.conf ....and now i have no Network device on my PC(wired or wireless) I can use wired conection if i start my laptop with a"previsious version of Linux"...2.26.43... I am a beginner in Linux These are my hardware: 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [ 14e4:4311] (rev 01) 08:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [ 14e4:170c] (rev 02)

    Read the article

  • How to disable VGA

    - by Bitmap
    If i run lspci | grep VGA I get below output which tells me below VGA cards are present on my computer. 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 08:02.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) The ES1000 is an onboard card which came with my machine. Do anyone know how to disable this VGA on my machine. The reason for this request is because if I run xrandr I get the output as shown below: xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 50.0* 800x600 51.0 52.0 53.0 680x384 54.0 55.0 640x480 56.0 512x384 57.0 400x300 58.0 320x240 59.0 Which means I am not able to configure nVidia to accept smaller resolution. Thank you.

    Read the article

  • DNS configuration issues. Clients inside network unable to resolve DNS server's name

    - by hydroparadise
    Setup the DNS service on Ubuntu 12.04 64 and all apears to be well except that my dhcp clients do not recognize my DNS servers hostname. When doing a nslookup on one of my Windows clients, I get C:\Users\chad>nslookup Default Server: UnKnown Address: 192.168.1.2 Where I would expect the FQDN in the spot where UnKnown is seen. The DNS server know's itself pretty well, but I think only because I have an entry in the /etc/hosts file to resolve. There's so many places to look I don't even know where to begin. Are there any logs I can look at? Something. Places I've looked at and configured: /etc/bind/zones/domain.com.db /etc/bind/zones/rev.1.168.192.in-addr.arpa /etc/bind/named.conf.local EDIT: '/etc/bind/zones/rev.1.168.192.in-addr.arpa' @ IN SOA dns-serv1.mydomain.com [email protected]. ( 2006081401; 28800; 604800; 604800; 86400 ) IN NS dns-serv1.mydomain.com. 2 IN PTR dns-serv1 2 IN PTR mydomain.com EDIT 2: '/etc/bind/named.conf.local' zone "mydomain.com" { type master; file "/etc/bind/zones/mydomain.com.db"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.0.168.192.in-addr.arpa"; };

    Read the article

  • Connecting XRAID to Sunfire via LSI FC card - Drives not showing up

    - by Matthew Watson
    Hi, I've got a Sunfire T1000 machine ( Solaris 10 10/09 s10s_u8wos_08a SPARC ) with a LSI7404EP-LC fibre channel card in it. This is plugged into an XRAID. The system seems to have picked up the card > /usr/platform/`uname -i `/sbin/prtdiag IO Location Type Slot Path Name Model ----------- ----- ---- --------------------------------------------- ------------------------- --------- MB/PCIE0 PCIE 0 /pci@780/fibre-channel fibre-channel MB/PCIE0 PCIE 0 /pci@780/fibre-channel fibre-channel MB/NET0 PCIE MB /pci@7c0/pci@0/network@4 network-pci14e4,1668 MB/NET1 PCIE MB /pci@7c0/pci@0/network@4,1 network-pci14e4,1668 MB/NET2 PCIX MB /pci@7c0/pci@0/pci@8/network@1 network-pci108e,1648 MB/NET3 PCIX MB /pci@7c0/pci@0/pci@8/network@1,1 network-pci108e,1648 MB/PCIX PCIX MB /pci@7c0/pci@0/pci@8/scsi@2 scsi-pci1000,50 LSI,1064 However it doesn't seem to be able to see the xraid attached to it, lsiutil only reports the onboard SAS controller. > /usr/local/bin/lsiutil ~ LSI Logic MPT Configuration Utility, Version 1.62, January 14, 2009 1 MPT Port found Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev IOC 1. mpt0 LSI Logic SAS1064 A3 105 010a0000 0 Select a device: [1-1 or 0 to quit] I've tried adding the configuration to /kernal/drv/sd.conf and /kernal/drv/ssd.conf as per this thread, however format still cannot see any drives on the xraid. I'm not sure where to go next. Any suggestions? From what I've read..this should pretty much just eb plug it in and they show up in format..

    Read the article

  • foswiki: hide some topic info when editing in WYSWYG mode.

    - by Mica
    I have a FOSWiki installation with a bunch of Topic templates already defined. the problem is, when a user selects the topic, they are presented with a bunch of extra information that they should not edit, and should not even see really. Is there a way to hide this content in the WYSWYG editor? Example: The topic template looks like this: <!-- * Foswiki.GenPDFAddOn Settings * Set GENPDFADDON_TITLE = <font size="7"><center>Foo</center></font> * Set GENPDFADDON_HEADFOOTFONT = helvetica * Set GENPDFADDON_FORMAT = pdf14 * Set GENPDFADDON_PERMISSIONS = print,no-copy * Set GENPDFADDON_ORIENTATION = portrait * Set GENPDFADDON_PAGESIZE = letter * Set GENPDFADDON_TOCLEVELS = 0 * Set GENPDFADDON_HEADERSHIFT = 0 --> <!-- PDFSTART --> <!-- HEADER LEFT "Foo:Bar" --> <!-- HEADER RIGHT "%BASETOPIC%" --> <!-- HEADER CENTER " " --> <!-- FOOTER RIGHT "Doc Rev %REVINFO{"r$rev - $date " web="%WEB%" topic="%BASETOPIC%"}%" --> <!-- FOOTER LEFT "F-xxx Rev A" --> <!-- FOOTER CENTER "Page $PAGE(1)" --> Header 1 foo etc. etc. etc <!-- pdfstop --> And when the user selects the topic template, they get all that in the WYSWYG editor. I would like to hide all that so when the user selects the topic template, they get Header 1 foo etc etc etc Without any of the other mark-up.

    Read the article

  • Disappeared graphics card

    - by lenovo user
    I have a Lenovo T520 with two graphics cards, an nVidia quadro and an intel graphics card. I'm running a Ubuntu and Windows 7 dual boot. I can no longer find any trace of my intel graphics card. In my linux boot: > lspci | grep VGA > 01:00.0 VGA compatible controller: nVidia Corporation GF106 [Quadro 2000M] (rev a1) In Windows in control panel display- advanced settings, I only see the NVIDIA Quadro 2000M. In the BIOS there is no mention of the intel graphics card, no where I can find to try and turn it on or off. I thought I was going crazy, but then I found a post I made on ask ubuntu I made 3 months ago where I listed the output of lspci on this same machine: lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [Quadro 2000M] (rev a1) What is going on? How could my intel graphics card have been disabled or turned off somehow without my knowledge? I've been in the BIOS 3 times now, each time convinced the last time I must have missed something, but I always find nothing. Am I missing something there? Could a thief have opened my computer and stolen my graphics card?

    Read the article

  • Linux boot - stop the kernel switching to a new framebuffer mode clearing output

    - by Avio
    I'm working on an embedded system (based onUbuntu 12.04 LTS) and I'm customizing its kernel. I'm having some problem with upstart, mountall and plymouth. Nothing unsolvable I suppose, but the real problem is that I can't diagnose properly what's going on because the kernel (or maybe plymouth) changes the video mode in the middle of the boot process. This completely wipes entire lines of log and prevents any debugging of kernel misconfigurations. My Grub2 config seems to be ok with: GRUB_CMDLINE_LINUX="" GRUB_CMDLINE_LINUX_DEFAULT="acpi=force noplymouth" GRUB_GFXMODE=1024x768x32 GRUB_GFXPAYLOAD_LINUX=keep Here is some relevant output of lspci: 00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) And here is the relevant portion of my kernel configuration: CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_DRM=y CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_I915=y CONFIG_DRM_I915_KMS=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_VESA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=640 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y Every other custom/stock kernel boot fine with that Grub2 config. What I would like to have is a single flow of messages on a single console (retaining one screen resolution) from the bootup logo till the login prompt. Does anybody know what I have to tweak to achieve this?

    Read the article

  • Decrease in disk performance after partitioning and encryption, is this much of a drop normal?

    - by Biohazard
    I have a server that I only have remote access to. Earlier in the week I repartitioned the 2 disk raid as follows: Filesystem Size Used Avail Use% Mounted on /dev/mapper/sda1_crypt 363G 1.8G 343G 1% / tmpfs 2.0G 0 2.0G 0% /lib/init/rw udev 2.0G 140K 2.0G 1% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm /dev/sda5 461M 26M 412M 6% /boot /dev/sda7 179G 8.6G 162G 6% /data The raid consists of 2 x 300gb SAS 15k disks. Prior to the changes I made, it was being used as a single unencrypted root parition and hdparm -t /dev/sda was giving readings around 240mb/s, which I still get if I do it now: /dev/sda: Timing buffered disk reads: 730 MB in 3.00 seconds = 243.06 MB/sec Since the repartition and encryption, I get the following on the separate partitions: Unencrypted /dev/sda7: /dev/sda7: Timing buffered disk reads: 540 MB in 3.00 seconds = 179.78 MB/sec Unencrypted /dev/sda5: /dev/sda5: Timing buffered disk reads: 476 MB in 2.55 seconds = 186.86 MB/sec Encrypted /dev/mapper/sda1_crypt: /dev/mapper/sda1_crypt: Timing buffered disk reads: 150 MB in 3.03 seconds = 49.54 MB/sec I expected a drop in performance on the encrypted partition, but not that much, but I didn't expect I would get a drop in performance on the other partitions at all. The other hardware in the server is: 2 x Quad Core Intel(R) Xeon(R) CPU E5405 @ 2.00GHz and 4gb RAM $ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 32 Lun: 00 Vendor: DP Model: BACKPLANE Rev: 1.05 Type: Enclosure ANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 6/i Rev: 1.11 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: CD-ROM GCR-8240N Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 05 I'm guessing this means the server has a PERC 6/i RAID controller? The encryption was done with default settings during debian 6 installation. I can't recall the exact specifics and am not sure how I go about finding them? Thanks

    Read the article

  • delta-dictionary/dictionary with revision awareness in python?

    - by shabbychef
    I am looking to create a dictionary with 'roll-back' capabilities in python. The dictionary would start with a revision number of 0, and the revision would be bumped up only by explicit method call. I do not need to delete keys, only add and update key,value pairs, and then roll back. I will never need to 'roll forward', that is, when rolling the dictionary back, all the newer revisions can be discarded, and I can start re-reving up again. thus I want behaviour like: >>> rr = rev_dictionary() >>> rr.rev 0 >>> rr["a"] = 17 >>> rr[('b',23)] = 'foo' >>> rr["a"] 17 >>> rr.rev 0 >>> rr.roll_rev() >>> rr.rev 1 >>> rr["a"] 17 >>> rr["a"] = 0 >>> rr["a"] 0 >>> rr[('b',23)] 'foo' >>> rr.roll_to(0) >>> rr.rev 0 >>> rr["a"] 17 >>> rr.roll_to(1) Exception ... Just to be clear, the state associated with a revision is the state of the dictionary just prior to the roll_rev() method call. thus if I can alter the value associated with a key several times 'within' a revision, and only have the last one remembered. I would like a fairly memory-efficient implementation of this: the memory usage should be proportional to the deltas. Thus simply having a list of copies of the dictionary will not scale for my problem. One should assume the keys are in the tens of thousands, and the revisions are in the hundreds of thousands. We can assume the values are immutable, but need not be numeric. For the case where the values are e.g. integers, there is a fairly straightforward implementation (have a list of dictionaries of the numerical delta from revision to revision). I am not sure how to turn this into the general form. Maybe bootstrap the integer version and add on an array of values? all help appreciated.

    Read the article

  • How to build many projects with the same svn revision number with hudson?

    - by tangens
    I'm just starting with hudson and I'd like to build my projects like my handmade solution did before: Retrieve the current svn revision number rev. Build all projects (each with individual result) with the revision number rev. Start again with step 1 regardless if there were any changes in the meantime (to detect nondeterministic errors that don't occur on every test run). How can I configure this with hudson?

    Read the article

  • CodePlex Daily Summary for Saturday, March 05, 2011

    CodePlex Daily Summary for Saturday, March 05, 2011Popular ReleasesXsltDb - DotNetNuke Module Builder: 02.00.66: Using XsltDb As User Controladding XsltDb configurations to skin, to your controls, ... Page level output cachingAlso takes into account current user current language see mdo:setup-putput-cache. Performance optimizations......for large configurations or large outputAutoLoL: AutoLoL v1.6.4: It is now possible to run the clicker anyway when it can't detect the Masteries Window Fixed a critical bug in the open file dialog Removed the resize button Some UI changes 3D camera movement is now more intuitive (Trackball rotation) When an error occurs on the clicker it will attempt to focus AutoLoLYAF.NET (aka Yet Another Forum.NET): v1.9.5.5 RTW: YAF v1.9.5.5 RTM (Date: 3/4/2011 Rev: 4742) Official Discussion Thread here: http://forum.yetanotherforum.net/yaf_postsm47149_v1-9-5-5-RTW--Date-3-4-2011-Rev-4742.aspx Changes in v1.9.5.5 Rev. #4661 - Added "Copy" function to forum administration -- Now instead of having to manually re-enter all the access masks, etc, you can just duplicate an existing forum and modify after the fact. Rev. #4642 - New Setting to Enable/Disable Last Unread posts links Rev. #4641 - Added Arabic Language t...youtubeFisher: YouTubeFisher v3.0 Beta: Adding support for more video formats including the Super HD (e.g. http://www.youtube.com/watch?v=MrrHs2bnHPA) Minor change related to the video title due to change in YouTube pageSnippet Designer: Snippet Designer 1.3.1: Snippet Designer 1.3.1 for Visual Studio 2010This is a bug fix release. Change logFixed bug where Snippet Designer would fail if you had the most recent Productivity Power Tools installed Fixed bug where "Export as Snippet" was failing in non-english locales Fixed bug where opening a new .snippet file would fail in non-english localesChiave File Encryption: Chiave 1.0: Final Relase for Chave 1.0 Stable: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Now with added support to Windows XP! Change Log from 0.9.2 to 1.0: ==================== Added: > Added Icon Overlay for Windows 7 Taskbar Icon. >Added Thumbnail Toolbar buttons to make the navigation easier...ASP.NET: Sprite and Image Optimization Preview 3: The ASP.NET Sprite and Image Optimization framework is designed to decrease the amount of time required to request and display a page from a web server by performing a variety of optimizations on the page’s images. This is the third preview of the feature and works with ASP.NET Web Forms 4, ASP.NET MVC 3, and ASP.NET Web Pages (Razor) projects. The binaries are also available via NuGet: AspNetSprites-Core AspNetSprites-WebFormsControl AspNetSprites-MvcAndRazorHelper It includes the foll...Document.Editor: 2011.9: Whats new for Document.Editor 2011.9: New Templates System New Plug-in System New Replace dialog New reset settings Minor Bug Fix's, improvements and speed upsTortoiseHg: TortoiseHg 2.0: TortoiseHg 2.0 is a complete rewrite of TortoiseHg 1.1, switching from PyGtk to PyQtSandcastle Help File Builder: SHFB v1.9.2.0 Release: This release supports the Sandcastle June 2010 Release (v2.6.10621.1). It includes full support for generating, installing, and removing MS Help Viewer files. This new release is compiled under .NET 4.0, supports Visual Studio 2010 solutions and projects as documentation sources, and adds support for projects targeting the Silverlight Framework. NOTE: The included help file and the online help have not been completely updated to reflect all changes in this release. A refresh will be issue...Network Monitor Open Source Parsers: Microsoft Network Monitor Parsers 3.4.2554: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, we have added 4 new protocol parsers and updated 79 existing parsers in the NetworkMonitor_Pa...Image Resizer for Windows: Image Resizer 3 Preview 1: Prepare to have your minds blown. This is the first preview of what will eventually become 39613. There are still a lot of rough edges and plenty of areas still under construction, but for your basic needs, it should be relativly stable. Note: You will need the .NET Framework 4 installed to use this version. Below is a status report of where this release is in terms of the overall goal for version 3. If you're feeling a bit technically ambitious and want to check out some of the features th...JSON Toolkit: JSON Toolkit 1.1: updated GetAllJsonObjects() method and GetAllProperties() methods to JsonObject and Properties propertiesFacebook Graph Toolkit: Facebook Graph Toolkit 1.0: Refer to http://computerbeacon.net for Documentation and Tutorial New features:added FQL support added Expires property to Api object added support for publishing to a user's friend / Facebook Page added support for posting and removing comments on posts added support for adding and removing likes on posts and comments added static methods for Page class added support for Iframe Application Tab of Facebook Page added support for obtaining the user's country, locale and age in If...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager small improvements for some helpers and AjaxDropdown has Data like the Lookup except it's value gets reset and list refilled if any element from data gets changedManaged Extensibility Framework: MEF 2 Preview 3: This release aims .net 4.0 and Silverlight 4.0. Accordingly, there are two solutions files. The assemblies are named System.ComponentModel.Composition.Codeplex.dll as a way to avoid clashing with the version shipped with the 4th version of the framework. Introduced CompositionOptions to container instantiation CompositionOptions.DisableSilentRejection makes MEF throw an exception on composition errors. Useful for diagnostics Support for open generics Support for attribute-less registr...PHPExcel: PHPExcel 1.7.6 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.4: Version: 2.0.0.4 (Milestone 4): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...VidCoder: 0.8.2: Updated auto-naming to handle seconds and frames ranges as well. Deprecated the {chapters} token for auto-naming in favor of {range}. Allowing file drag to preview window and enabling main window shortcut keys to work no matter what window is focused. Added option in config to enable giving custom names to audio tracks. (Note that these names will only show up certain players like iTunes or on the iPod. Players that support custom track names normally may not show them.) Added tooltips ...SQL Server Compact Toolbox: Standalone version 2.0 for SQL Server Compact 4.0: Download the Visual Studio add-in for SQL Server Compact 4.0 and 3.5 from here Standalone version of (most of) the same functionality as the add-in, for SQL Server Compact 4.0. Useful for anyone not having Visual Studio Professional or higher installed. Requires .NET 4.0. Any feedback much appreciated.New Projects.Deploy - Enterprise .NET Application Deployment Solution: .Deploy is a .NET based enterprise application deployment solution focused around .NET applications. .Deploy automates the repetitive task of pushing/deploying applications in a controlled, auditable, and verifiable way.AAEngine: A 2D game engine for XNA.ANKASTS: ankastsAutomator: Automator is a GUI tool that is intended to manage and run hierarchical structure of actions (Tasks). Something similar to NAnt but targeted for a far wider audience. Automator is developed in C# and WPF.BANews: ???????????????????,??SQL+Server2008,C#,asp.net????,??????Jquery?CSS+DIV??。??????,?????????????,????????,??????,??。Cloud BookShelf: Cloud BookShelf ?OData Client for Objective-C(http://odataobjc.codeplex.com/)????、Azure??????????????iOS??????????。CodingBlog: codingblogDNN Module Samples: There are some sample DNN modules in this projectEITEST: It is the Test Projecteuler 11: euler 11euler 52 problem: euler 52 problemfastspweb - Access SPWeb through cache: This an engine for caching SPSite and SPWeb objects on SharePoint. Because SharePoint dont alllow multithreaded access to these objects, the access is done through a threadpoolGSP420 2011 Spring Course Project: Course project game engine for DeVry Spring 2011 GSP420 class.IE Library for Small Basic: This library extend Small Basic to allows you to access web site using by Internet Explorer from Small Basic program. ???????? Small Basic ????、Small Basic ??? Internet Explorer ???? Web ???????????????????。InfoStrat Motion Framework: InfoStrat Motion Framework enables you to easily use motion tracking in your WPF applications with depth sensors such as Kinect and PrimeSensor.JSC.Mobile: Mobile(IPhone) WebApp with offline capabilities to administrate your car milagesMSSQL Db Generation From and To .NET Assemblies(Dlls): MSSQL DbGenerator works with an existing MSSQL Db and codes all structers of it into a .NET Assembly(DbAssembly) --of course with the exception of data within. More than that it has the ability to read any previously created DbAssembly and generates MSSQL db from scratchMVP Summit Events WP7: An application to learn of the best gatherings and events at the Microsoft MVP Summit in 2011. We are open sourcing the application to give some knowledge around how to develop a Windows Phone 7 application consuming OData with the MVVM pattern.NAntMenu: NAntMenu Shell Extension is a Windows Shell Extension allowing you to run NAnt build scripts directly from within Windows Explorer.NGem: another attempt to create package management in .net/c++ environmentNOrder: A basic sorting algorithm library developed in C#, providing users the flexibility to choose how to sort data.Orchard CulturePicker Module: Module for Orchard, that allows users to pick a preferred culture, instead of using a default site culture.Orchard Html Field Module: Html Field for the Orchard ProjectP9876: p9876 is not p1234SharePoint 2010 File Migrating tool (console program): Copy files and sub folders from file system to SharePoint 2010 document librarySilverlightTube: Silverlight Media End Work Project to recreate a You Tube looking websiteSITEYONETIM: Site ve Apartman YönetimiSITEYONETIMWEB: siteyonetimwebSteel: Steel is a puzzle game for Windows Phone 7 made with the XNA framework.WikiVB: A Wikipedia API wrapper library written in VB.NET. Can be used with languages like C#, F# and other .NET programming languages.

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >