Search Results

Search found 12730 results on 510 pages for 'trusted root'.

Page 12/510 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Ubuntu 10.04: boot error for custom compiled kernel - gave up waiting for root device

  - by atharva

  I have installed lucid on my Lenevo Laptop (Y 410 series , x86 platform) and it is working fine. Now I have compiled kernel 2.6.37 downloaded from the kernel tree. I followed usual procedure of compiling kernel (make menuconfig, make, make modules etc). Then I created the initrd image using mkinitramfs and updated my grub using update-grub command. update-grub detects the initrd image of the compiled kernel. However when I boot from this kernel it gives me following error: Gave up waiting for root device. Common problems: -Boot args (cat /proc/cmdline) -Check rootdelay= (did the system wait long enough?) -Check root= (did the system wait for the right device?) -Missing modules (cat /proc/modules; ls /dev) ALERT! root=UUID=/... does not exist and then it falls onto initramfs prompt. I have tried following solutions discussed in different Ubuntu forums: disable uuid and point root=/dev/sda8 (sda8 is where my kernel image resides (both default kernel and compiled one) from /etc/default/grub compile kernel using CONFIG_DEVTMPFS=y suggested here Still I am unable to boot from the compile kernel. Could someone please suggest me the solution?

  Read the article

• Rsyslog is not working properly, it does not log anything

  - by Victor Henriquez

  I'm running a Debian server and a couple of days ago my rsyslog started to behave very weird, the daemon is running but it doesn't seem to do anything. Many people use the system but I'm the only one with (legal) root access. I'm using the default rsyslogd configuration (if you think is relevant I'll attach it, but it's the one that comes with the package). After I rotated all the log files, they have remained empty: # ls -l /var/log/*.log -rw-r--r-- 1 root root 0 Jun 27 00:25 /var/log/alternatives.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/auth.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/daemon.log -rw-r--r-- 1 root root 0 Jun 27 00:25 /var/log/dpkg.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/kern.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/lpr.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/mail.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/user.log Any try to force a log writing does not have any effect: # logger hey # ls -l /var/log/messages -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/messages Lsof shows that rsyslogd does not have any log files opened: # lsof -p 1855 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME rsyslogd 1855 root cwd DIR 202,0 4096 2 / rsyslogd 1855 root rtd DIR 202,0 4096 2 / rsyslogd 1855 root txt REG 202,0 342076 21649 /usr/sbin/rsyslogd rsyslogd 1855 root mem REG 202,0 38556 32153 /lib/i386-linux-gnu/i686/cmov/libnss_nis-2.13.so rsyslogd 1855 root mem REG 202,0 79728 32165 /lib/i386-linux-gnu/i686/cmov/libnsl-2.13.so rsyslogd 1855 root mem REG 202,0 26456 32163 /lib/i386-linux-gnu/i686/cmov/libnss_compat-2.13.so rsyslogd 1855 root mem REG 202,0 297500 1061058 /usr/lib/rsyslog/imuxsock.so rsyslogd 1855 root mem REG 202,0 42628 32170 /lib/i386-linux-gnu/i686/cmov/libnss_files-2.13.so rsyslogd 1855 root mem REG 202,0 22784 1061106 /usr/lib/rsyslog/imklog.so rsyslogd 1855 root mem REG 202,0 1401000 32169 /lib/i386-linux-gnu/i686/cmov/libc-2.13.so rsyslogd 1855 root mem REG 202,0 30684 32175 /lib/i386-linux-gnu/i686/cmov/librt-2.13.so rsyslogd 1855 root mem REG 202,0 9844 32157 /lib/i386-linux-gnu/i686/cmov/libdl-2.13.so rsyslogd 1855 root mem REG 202,0 117009 32154 /lib/i386-linux-gnu/i686/cmov/libpthread-2.13.so rsyslogd 1855 root mem REG 202,0 79980 17746 /usr/lib/libz.so.1.2.3.4 rsyslogd 1855 root mem REG 202,0 18836 1061094 /usr/lib/rsyslog/lmnet.so rsyslogd 1855 root mem REG 202,0 117960 31845 /lib/i386-linux-gnu/ld-2.13.so rsyslogd 1855 root 0u unix 0xebe8e800 0t0 640 /dev/log rsyslogd 1855 root 3u FIFO 0,5 0t0 2474 /dev/xconsole rsyslogd 1855 root 4u unix 0xebe8e400 0t0 645 /var/spool/postfix/dev/log rsyslogd 1855 root 5r REG 0,3 0 4026532176 /proc/kmsg I was so frustrated that even reinstall the rsyslog package, but it still refuses to log anything: # apt-get remove --purge rsyslog # apt-get install rsyslog I thought someone had hacked the system, so run rkhunter, chkrootkit, unhide in an attempt to find hide processes / ports and nmap in a remote host to compare with the ports shown by netstat. And I know this doesn't mean anything, but all looks ok. The system also have an iptables firewall that is very restrictive with incoming / outgoing connections. This is driving me crazy, any idea what is going on here? [EDIT - disk space info] # df -h Filesystem Size Used Avail Use% Mounted on rootfs 24G 22G 629M 98% / /dev/root 24G 22G 629M 98% / devtmpfs 10M 112K 9.9M 2% /dev tmpfs 76M 48K 76M 1% /run tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 151M 40K 151M 1% /tmp tmpfs 151M 0 151M 0% /run/shm

  Read the article

• Import Java Trusted Certificate to JRE

  - by Zalastax

  I need to install a certificate from a Java app to a lot of people. I want to use a one click program or batch file to import it as a Trusted Certificate(in Control Panel-Security-Certificate). Then they won't need to press always allow first time they use the application. I have extracted the needed certificate as both a .csr and as a .cer (the .csr via Control Panel and the .cer via keytool). Now I need to get one of them back without any clicking in menus. I don't really understand the documentation of importing .cer with keytool and would like an example. Or are there an easier way than using keytool?

  Read the article

• sql user not associated with a trusted connection

  - by homestead

  just setup a new server with sql server express 2005. (want to connect remotely) I set logins both windows and sql I modified so both local and remote connections are allowed I restarted the server windows firewall is not connected. (have an external firewall with a hole at port 1443) user account is active, no password policy or forcing to change on next login etc. If I even try to connect using this username locally on the server using 'file | connect to object explorer' I get the same message that the user is not associated to a trusted connection.

  Read the article

• Error when running binary with root setuid under encrypted home directory

  - by carestad

  I'm using a VPN script for Juniper's Secure Access protocol form here, which executes a binary located under ~/.juniper_networks/network_connect/ncsvc with the following permissions: -rws--s--x 1 root root 1225424 okt. 25 13:54 ncsvc But when I do, I get the following error: ncsvc> Failed to setuid to root. Error 1: Operation not permitted Moving/copying the ~/.juniper_networks folder to e.g. /opt/juniper (with the same owner permissions), I don't get the error. In the forum thread at Ubuntuforums someone pointed out that it's probably because I have encrypted my /home and thus a "problem" with ecryptfs. How can I fix this?

  Read the article

• No root file system - Alternate CD + LVM

  - by Carlos

  I am trying to install 11.10 as dual boot with Windows 7. I have all partitioned well as you can see here: http://www.flickr.com/photos/42897978@N00/7111180385/ I burned the Alternate CD ISO to a CD. Boot from it and followed instructions to Partitioning. There, I configured the LVM partitions as follows: Volume Group ubuntu-vg - Uses Physical Volume /dev/sda7 380GB - Provides Logical Volume home-lv 60GB - Provides Logical Volume root-lv 60GB - Provides Logical Volume swap-lv 6GB That is all I want (note that my /boot is outside of LVM) Then when I say that all is Ok and to write it to disk and continue with the installation, I get the following error. !! Partition Disks No root file system No root file system is defined Please correct this from the partitioning menu. What should I fix and how? I tried issuing the "Revert changes to partitions", but nothing happens. It seems that the LVM configuration has already been written to the CD. HELP!!

  Read the article

• SEO for site with 301 redirect on root domain to subfolder

  - by Kim

  I've been asked to do SEO for a site. The site is made using Wordpress and prestashop. Because of this the root domain has a 301 redirect to a subfolder - domain/shop/ For my SEO submission work, I know it's not good practice to submit urls that have redirects on them and a lot of the time it's not allowed. After searching the net I think my best bet is to do all my site submissions using the url - domain/shop/ even though it will take a lot more listings to get them up in ranking compared to using their root domain. I'm not sure how it will work. The root domain has the greatest rank then passes rank to the rest of the site. If I'm targeting the subfolder will it work?

  Read the article

• Software installed on root partition or on home partition

  - by Tim

  I am planning to install some big softwares such as Matlab (4GB), Mathematica (4GB) on my Ubuntu partitions. I was wondering if I installed them on my home partition, when I reinstall Ubuntu without touching the home partition, will the softwares still be runnable after reinstallation? what are the advantage and disadvantages of installing softwares on root partition and of on home partition? with your answer to the previous questions, what are some reasonable plans for the sizes of root partition and of home partition? Note that I would like to learn programming in C, C++, Java, Python, Lisp, databases under both Ubuntu and Windows, and no games. My laptop has around 230 GB, where I plan to install both Windows and Ubuntu, and reserve 40 GB for Ubuntu (three partitions: swap, root and home), 110 GB for NTFS partition shared between the two OSes, 70 GB for Windows OS partition, and 10 GB that can be added to any of the above partitions. I will change my plan according to your suggestions. Thanks and regards!

  Read the article

• Revert permission of /usr back to root

  - by Rodrigo Sasaki

  I was doing some alterations but in one I messed up. I changed the permissions of almost everything inside the /usr folder to my own user. It didn't change everything because it failed in the middle of the execution, I still have /sbin, /share and /src assigned to root. the command I ran was this (this was executed while inside /usr): sudo chown -R myuser:myuser . Is there any way for me to revert this? If I run: sudo chown -R root:root . I get this error: sudo: /usr/bin/sudo must be owned by uid 0 and have the setuid bit set

  Read the article

• Samba network sharing NTFS drives and root permissions from local drives

  - by Bill

  I'm able to share my internal 2ndry NTFS drives (sdb1,2 and 3) on the network with Windows computers now but even though Samba read/write is enabled, Windows network computers can only open files "read-only" and can't save files to the samba shared drives/folders. I try to set permissions in Ubuntu via folder and/or file properties even logged in root via Nautilus but all the samba shared folders and files are set as owner = root, accessible and does not allow me to change them to read/write, it just resets to root, accessible, in other words, I can't change permissions. I'm running Ubuntu 11.04 Gnome on an old Dell Dimension 2400. Also, in order to for me to copy or move any files from the Ubuntu drive to the sdb1,2 or 3 drives, I have to gksu nautilus. This consequently prevents me from copying .ISO files to my "Multisys" thumb drive too.

  Read the article

• Setting TeX Live path for root

  - by N.N.

  I have installed TeX Live 2011 vanilla and I have trouble setting the TeX Live path for root (in Ubuntu 11.10). The problem is that when I run sudo tlmgr I get: sudo: tlmgr: command not found To fix the path for non-root it was sufficient to add PATH=/usr/local/texlive/2011/bin/x86_64-linux:$PATH to /etc/profile. I have tried adding this same line to /root/.bashrc and I have also tried to add it to /etc/profile.d/zzz-texlive.sh like Herbert suggest in http://tex.stackexchange.com/questions/26624/tlmgr-inaccessible/26626#26626 but it does not help.

  Read the article

• How to add another OS entry in Wubi grub

  - by Amey Jah

  I am trying to install another linux distro besides ubuntu. However, I want to retain my existing windows based loader. Currently, as per my knowledge, MsDos loads grub which then loads Ubuntu (with loop back trick). Now, I have a new linux distro installed on /dev/sda8 (/boot for new distro) where as /root for that OS is installed on /dev/sda9. I tried following steps 1. Add entry into 40_custom of ubuntu grub 2. update grub But upon booting via that entry, it is not able to load the new OS and shows me blank screen. What could be the problem? Additional data: grub.cfg file of ubuntu menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-fc296be2-8c59-4f21-a3f8-47c38cd0d537' { gfxmode $linux_gfx_mode insmod gzio insmod ntfs set root='hd0,msdos5' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 01CD7BB998DB0870 else search --no-floppy --fs-uuid --set=root 01CD7BB998DB0870 fi loopback loop0 /ubuntu/disks/root.disk set root=(loop0) linux /boot/vmlinuz-3.5.0-19-generic root=UUID=01CD7BB998DB0870 loop=/ubuntu/disks/root.disk ro quiet splash $vt_handoff initrd /boot/initrd.img-3.5.0-19-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-fc296be2-8c59-4f21-a3f8-47c38cd0d537' { menuentry 'Ubuntu, with Linux 3.5.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-advanced-fc296be2-8c59-4f21-a3f8-47c38cd0d537' { gfxmode $linux_gfx_mode insmod gzio insmod ntfs set root='hd0,msdos5' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 01CD7BB998DB0870 else search --no-floppy --fs-uuid --set=root 01CD7BB998DB0870 fi loopback loop0 /ubuntu/disks/root.disk set root=(loop0) echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=01CD7BB998DB0870 loop=/ubuntu/disks/root.disk ro quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-recovery-fc296be2-8c59-4f21-a3f8-47c38cd0d537' { insmod gzio insmod ntfs set root='hd0,msdos5' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 01CD7BB998DB0870 else search --no-floppy --fs-uuid --set=root 01CD7BB998DB0870 fi loopback loop0 /ubuntu/disks/root.disk set root=(loop0) echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=01CD7BB998DB0870 loop=/ubuntu/disks/root.disk ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } } ### END /etc/grub.d/10_lupin ### menuentry 'Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-0f490b6c-e92d-42f0-88e1-0bd3c0d27641'{ load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos8' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8 0f490b6c-e92d-42f0-88e1-0bd3c0d27641 else search --no-floppy --fs-uuid --set=root 0f490b6c-e92d-42f0-88e1-0bd3c0d27641 fi echo 'Loading Linux core repo kernel ...' linux /boot/vmlinuz-linux root=UUID=0f490b6c-e92d-42f0-88e1-0bd3c0d27641 ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initramfs-linux.img } menuentry 'Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-0f490b6c-e92d-42f0-88e1-0bd3c0d27641' { load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos8' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8 0f490b6c-e92d-42f0-88e1-0bd3c0d27641 else search --no-floppy --fs-uuid --set=root 0f490b6c-e92d-42f0-88e1-0bd3c0d27641 fi echo 'Loading Linux core repo kernel ...' linux /boot/vmlinuz-linux root=UUID=0f490b6c-e92d-42f0-88e1-0bd3c0d27641 ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initramfs-linux-fallback.img } lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 931.5G 0 disk +-sda1 8:1 0 39.2M 0 part +-sda2 8:2 0 19.8G 0 part +-sda3 8:3 0 205.1G 0 part +-sda4 8:4 0 1K 0 part +-sda5 8:5 0 333.7G 0 part /host +-sda6 8:6 0 233.4G 0 part +-sda7 8:7 0 100.4G 0 part +-sda8 8:8 0 100M 0 part +-sda9 8:9 0 14.7G 0 part +-sda10 8:10 0 21.4G 0 part +-sda11 8:11 0 3G 0 part sr0 11:0 1 1024M 0 rom loop0 7:0 0 29G 0 loop / blkid /dev/loop0: UUID="fc296be2-8c59-4f21-a3f8-47c38cd0d537" TYPE="ext4" /dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="5450-4444" TYPE="vfat" /dev/sda2: LABEL="RECOVERY" UUID="78C4FAC1C4FA80A4" TYPE="ntfs" /dev/sda3: LABEL="OS" UUID="DACEFCF1CEFCC6B3" TYPE="ntfs" /dev/sda5: UUID="01CD7BB998DB0870" TYPE="ntfs" /dev/sda6: UUID="01CD7BB99CA3F750" TYPE="ntfs" /dev/sda7: LABEL="Windows 8" UUID="01CDBFB52F925F40" TYPE="ntfs" /dev/sda8: UUID="cdbb5770-d29c-401d-850d-ee30a048ca5e" TYPE="ext2" /dev/sda9: UUID="0f490b6c-e92d-42f0-88e1-0bd3c0d27641" TYPE="ext2" /dev/sda10: UUID="2e7682e5-8917-4edc-9bf9-044fea2ad738" TYPE="ext2" /dev/sda11: UUID="6081da70-d622-42b9-b489-309f922b284e" TYPE="swap Any help is appreciated. Please let me know if you need any extra data.

  Read the article

• How can I backup files on /etc using Deja Dup? [closed]

  - by Chris Good

  Possible Duplicate: How do I open Deja Dup as root? I am using Ubuntu 12.04 LTS. I'm trying to setup Deja Dup to backup the files for several users (/home) and /etc but as it runs as myself, there are many files it cannot read and therefore cannot backup. I want to try running Deja Dup as root as then it should be able to read and backup all files. I've seen some other info about how to set up a particular App to run as root, so I guess I should try that.

  Read the article

• PLEASE HELP! Cannot login to server after file permissions change!

  - by John

  So, I did something really stupid. Please bear with me as I am new to ubuntu server. I ran chmod -R 700 / when I was logged in as root. Now when I try to login as my normal user I immediately get kicked out. Is there anyway to log back in to the server whether it is root or whoever so that I can change the permissions? or am I totally screwed? I dont think I have root access enabled in the /etc/ssh/sshd_config file. I do have physical access to the server. I really need some help here. Thanks in advance!

  Read the article

• Problems increasing root size

  - by user212866

  I'm running out of space, so I tried to increase root size using this link: Increase size of root partition after installing Ubuntu in Windows Here is the output Filesystem Type Size Used Avail Use% Mounted on /dev/sda7 ext4 6,2G 5,6G 308M 95% / udev devtmpfs 965M 4,0K 965M 1% /dev tmpfs tmpfs 389M 892K 388M 1% /run none tmpfs 5,0M 4,0K 5,0M 1% /run/lock none tmpfs 972M 440K 971M 1% /run/shm /dev/sda5 fuseblk 12G 6,1G 5,8G 52% /media/Ubuntu /dev/sda2 fuseblk 278G 260G 19G 94% /media/AC4CC70D4CC6D16E I tried to allocate 16Gb in the host (/dev/sda2 which is windows 7 partition). When I get to the \ubuntu\disks folder, I only get the "new.disk" file which weighs the 16Gb allocated and not the "root.disk" file too. Also, the /dev/sda7 size doesn't increase. Could you please help me? Many thanks

  Read the article

• WMI Rights required to read root\MicrosoftIISv2 in IIS7 with IIS6 compatibility mode

  - by JoeBilly

  I need to manage my IIS7 (Windows Server 2008) remotely with a WMI IIS6 API. So I added the IIS6 WMI Compatibility and IIS6 Metabase Compatibility roles to access the root\MicrosoftIIsv2 namespace. I have a domain account which is not administrator on the remote machine ; with this right, everything is ok. I configured these rights for my domain account to access the root\MicrosoftIIsv2 WMI namespace remotely ; note that these rights work perfectly on a IIS6 and Windows Server 2003 : DCOM : Account in Distributed COM Users Remote & local access to DCOM WMI : Root\CIMV2 (I need access here too) Execute methods, Enable Account, Remote Enable Root\Default (I need access here too) Execute methods, Enable Account, Remote Enable Root\MicrosoftIISv2 Execute methods, Enable Account, Provider Write, Remote Enable IIS Metabase (Metabase Explorer) : LM Full Control (W3SVC inherits these permissions) I tried to give some access on C:\Windows\System32\inetsrv too ; don't know if needed. My issue is : I can't list the IIS WebSites (\root\MicrosoftIISv2:IIsWebServerSetting.Name="W3SVC/*"). I don't get an 'access denied' but nothing is returned. My API and powershell tests can connect and execute queries in the root\MicrosoftIISv2 namespace I can read the IIsComputer class ex: Get-WmiObject IIsComputer -namespace "ROOT\MicrosoftIISv2" -authentication PacketPrivacy | SELECT * I can't read the IIsWebServerSetting, IIsWebServer ... to list the WebSites : the query returns an empty collection ex: Get-WmiObject IIsWebServerSetting -namespace "ROOT\MicrosoftIISv2" -authentication PacketPrivacy | SELECT ServerComment All queries work perfectly if the account is administrator as already said I am using PacketPrivacy authentication FI: I got a Warning Event 5605 with the Administrator right or not, that does not seem to have an impact : The root\MicrosoftIISv2 namespace is marked with the RequiresEncryption flag. Access to this namespace might be denied if the script or application does not have the appropriate authentication level. Change the authentication level to Pkt_Privacy and run the script or application again Ok, I have some more informations, when I use IIS 6 Metabase Explorer with my administrator account I can see the rights are correctly inherited for my non-administrator account. But when I try to connect using my non-administrator account, I can list the LM node, but get an "access denied, failed to get a key's data" when I try to browse the child nodes. I'll check further. I tried to Trace the WMI Activity, and everything seems OK ; this tends to confirm that the problem lies in IIS Rights.

  Read the article

• rkhunter not using root external email on ubuntu

  - by Zen

  i have installed rkhunter on ubuntu 10.04 LTS when i try to test rkhunter report it doesn't send email to my external root email recipient. i can send email only editing /etc/default/rkhunter by replacing this row REPORT_EMAIL="root" with the desired recipient REPORT_EMAIL="[email protected]" These are my config file settings: /root/.forward [email protected] and /etc/aliases root: [email protected] But it doesn't work with root recipient. Any suggestion?

  Read the article

• Force logout a user

  - by Mithun

  I When I logged into the machine as root and typed who to see which users are logged in, I found somebody else too logged in as root devuser pts/0 2011-11-18 09:55 (xxx.xxx.xxx.xxx) root pts/1 2011-11-18 09:56 (xxx.xxx.xxx.xxx) testuser pts/2 2011-11-18 14:54 (xxx.xxx.xxx.xxx) root pts/3 2011-11-18 14:55 (xxx.xxx.xxx.xxx) How can I force a root user at pts/3 to logout?

  Read the article

• Bracketing algorithm when root finding. Single root in "quadratic" function

  - by Ander Biguri

  I am trying to implement a root finding algorithm. I am using the hybrid Newton-Raphson algorithm found in numerical recipes that works pretty nicely. But I have a problem in bracketing the root. While implementing the root finding algorithm I realised that in several cases my functions have 1 real root and all the other imaginary (several of them, usually 6 or 9). The only root I am interested is in the real one so the problem is not there. The thing is that the function approaches the root like a cubic function, touching with the point the y=0 axis... Newton-Rapson method needs some brackets of different sign and all the bracketing methods I found don't work for this specific case. What can I do? It is pretty important to find that root in my program... EDIT: more problems: sometimes due to reaaaaaally small numerical errors, say a variation of 1e-6 in some value the "cubic" function does NOT have that real root, it is just imaginary with a neglectable imaginary part... (checked with matlab) EDIT 2: Much more information about the problem. Ok, I need root finding algorithm. Info I have: The root I need to find is between [0-1] , if there are more roots outside that part I am not interested in them. The root is real, there may be imaginary roots, but I don't want them. Probably all the rest of the roots will be imaginary The root may be double in that point, but I think that actually doesn't mater in numerical analysis problems I need to use the root finding algorithm several times during the overall calculations, but the function will always be a polynomial In one of the particular cases of the root finding, my polynomial will be similar to a quadratic function that touches Y=0 with the point. Example of a real case: The coefficient may not be 100% precise and that really slight imprecision may make the function not to touch the Y=0 axis. I cannot solve for this specific case because in other cases it may be that the polynomial is pretty normal and doesn't make any "strange" thing. The method I am actually using is NewtonRaphson hybrid, where if the derivative is really small it makes a bisection instead of NewRaph (found in numerical recipes). Matlab's answer to the function on the image: roots: 0.853553390593276 + 0.353553390593278i 0.853553390593276 - 0.353553390593278i 0.146446609406726 + 0.353553390593273i 0.146446609406726 - 0.353553390593273i 0.499999999999996 + 0.000000040142134i 0.499999999999996 - 0.000000040142134i The function is a real example I prepared where I know that the answer I want is 0.5 Note: I still haven't check completely some of the answers I you people have give me (Thank you!), I am just trying to give al the information I already have to complete the question.

  Read the article

• SSMTP to forward root@localhost mail

  - by Redconnection

  I would like to forward mail that gets sent root@localhost on multiple servers to our company admin account (e-mail is hosted on gmail) I have installed ssmtp on centos 5.5 via yum and configured it. i've also changed the last line in /etc/aliases to reflect where mail to root should go to. I've then tried sending mail to root - this gets delivered without a problem (mail -v root) I've also tried sending mail to root@localhost - this is not delivered to the specified gmail account.

  Read the article

• VMWare player - compiling server modules - Ubuntu 13.10

  - by user211976

  While running Ubuntu 13.04 whenever the Linux kernel had been updated, this used to make vmware player happy: sudo apt-get install linux-headers-$(uname -r) sudo vmware-modconfig --console --install-all Yesterday I upgraded to Ubuntu 13.10 and lo and behold, the above workaround does not work anymore: Unable to install all modules. See log for details. I assume by "See log" it means the files in /tmp/vmware-root/*log root@hugin:/tmp/vmware-root# ls -ltr /tmp/vmware-root/ totalt 16 -rw-r--r-- 1 root root 3815 nov 6 13:54 vmware-apploader-17267.log -rw-r--r-- 1 root root 0 nov 6 13:54 vmware-vmis-17693.log -rw-r--r-- 1 root root 0 nov 6 13:54 vmware-vmis-17742.log -rw-r--r-- 1 root root 0 nov 6 13:54 vmware-vmis-18701.log -rw-r--r-- 1 root root 0 nov 6 13:54 vmware-vmis-18750.log -rw-r--r-- 1 root root 0 nov 6 13:54 vmware-vmis-19100.log -rw-r--r-- 1 root root 0 nov 6 13:54 vmware-vmis-19149.log -rw-r--r-- 1 root root 9250 nov 6 13:54 vmware-modconfig-17267.log root@hugin:/tmp/vmware-root# tail /tmp/vmware-root/vmware-modconfig-17267.log 2013-11-06T13:54:28.950+01:00| modconfig| I120: Copied Module.symvers from "/tmp/modconfig-wpDrtf/vmci-only/Module.symvers" to "/tmp/modconfig-wpDrtf/vsock-only/Module.symvers". 2013-11-06T13:54:28.950+01:00| modconfig| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-wpDrtf/vsock-only auto-build HEADER_DIR=/lib/modules/3.11.0-12-generic/build/include CC=/usr/bin/gcc IS_GCC_3=no" 2013-11-06T13:54:31.048+01:00| modconfig| I120: Successfully built vsock. Module is currently at "/tmp/modconfig-wpDrtf/vsock.o". 2013-11-06T13:54:31.048+01:00| modconfig| I120: Found the vsock symvers file at "/tmp/modconfig-wpDrtf/vsock-only/Module.symvers". 2013-11-06T13:54:31.048+01:00| modconfig| I120: Installing vsock from /tmp/modconfig-wpDrtf/vsock.o to /lib/modules/3.11.0-12-generic/misc/vsock.ko. 2013-11-06T13:54:31.048+01:00| modconfig| I120: Registering file "/lib/modules/3.11.0-12-generic/misc/vsock.ko". 2013-11-06T13:54:31.400+01:00| modconfig| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0. 2013-11-06T13:54:31.400+01:00| modconfig| I120: Registering file "/usr/lib/vmware/symvers/vsock-3.11.0-12-generic". 2013-11-06T13:54:31.764+01:00| modconfig| I120: "/usr/lib/vmware-installer/2.1.0vmware-installer" exited with status 0. 2013-11-06T13:54:31.786+01:00| modconfig| I120: We are now shutdown. Ready to die! root@hugin:/tmp/vmware-root# tail /tmp/vmware-root/vmware-apploader-17267.log 2013-11-06T13:54:20.911+01:00| appLoader| I120: libglib-2.0.so.0 <SYSTEM> 2013-11-06T13:54:20.911+01:00| appLoader| I120: libz.so.1 <SYSTEM> 2013-11-06T13:54:20.911+01:00| appLoader| I120: libvmware-modconfig-console.so <SHIPPED> 2013-11-06T13:54:20.912+01:00| appLoader| I120: Shipped glib version is 2.24 2013-11-06T13:54:20.912+01:00| appLoader| I120: System glib version is 2.38 2013-11-06T13:54:20.912+01:00| appLoader| I120: Using system version of glib. 2013-11-06T13:54:20.912+01:00| appLoader| I120: Loading system version of libgcc_s.so.1. 2013-11-06T13:54:20.912+01:00| appLoader| I120: Loading system version of libglib-2.0.so.0. 2013-11-06T13:54:20.912+01:00| appLoader| I120: Loading system version of libz.so.1. 2013-11-06T13:54:20.912+01:00| appLoader| I120: Loading shipped version of libxml2.so.2.

  Read the article

• How do I run a command as a different user from a root cronjob?

  - by rob

  I seem to be stuck between an NFS limitation and a Cron limitation. So I've got root cron (on RHEL5) running a shell script that, among other things, needs to rsync some files over an NFS mount. And the files on the NFS mount are owned by the apache user with mode 700, so only the apache user can run the rsync command -- running as root yields a permission error (NFS being a rare case, apparently, where the root user is not all-powerful?) When I just want to run the rsync by hand, I can use "sudo -u apache rsync ..." But sudo no workie in cron -- it says "sudo: sorry, you must have a tty to run sudo". I don't want to run the whole script as apache (i.e. from apache's crontab) because other parts of the script do require root -- it's just that one command that needs to run as apache. And I would really prefer not to change the mode on the files, as that will involve significant changes to other applications. There's gotta be a way to accomplish "sudo -u apache" from cron?? thanks! rob

  Read the article

• ESXi 4.0 - cannot copy files

  - by Peter

  I am unable to copy files or make directories on my installation of VMWare ESXi 4.0. I have done so in the past (copied an iso onto a datastore). But something has changed and I have no idea what. I cannot copy using the datastore browser (get a dialog saying "Expected a PUT_FILE_DONE message. Got SESSION_COMPLETE"). I cannot create a directory through datastore browser (get a dialog saying "Cannot complete file creation operation"). When I ssh to the ESXi server I cannot create files or folders under /vmfs/volumes. But I can manipulate files elswhere (including /vmfs). Here are the permissions for the directories (I am logged in as root). ~ # ls -lh /vmfs/volumes/ drwxr-xr-t 1 root root 1.2k Sep 3 12:19 4a76f260-36b7eb85-c3b3-0024e8314929 drwxr-xr-x 1 root root 8 Jan 1 1970 4a76f261-d6190a9e-3b89-0024e8314929 drwxr-xr-t 1 root root 1.4k Sep 22 10:38 4a76f262-4ac21f0a-6bc1-0024e8314929 l--------- 0 root root 1.9k Jan 1 1970 Hypervisor1 - c42ce27f-eb8d7f70-7f70-0e7a85e8edc4 l--------- 0 root root 1.9k Jan 1 1970 Hypervisor2 - bbf1477b-4aec1d8c-caa5-5e8720bebd85 l--------- 0 root root 1.9k Jan 1 1970 Hypervisor3 - efd8efe3-03bc1cbf-15e0-080efd9e7379 drwxr-xr-x 1 root root 8 Jan 1 1970 bbf1477b-4aec1d8c-caa5-5e8720bebd85 drwxr-xr-x 1 root root 8 Jan 1 1970 c42ce27f-eb8d7f70-7f70-0e7a85e8edc4 l--------- 0 root root 1.9k Jan 1 1970 datastore1 - 4a76f260-36b7eb85-c3b3-0024e8314929 l--------- 0 root root 1.9k Jan 1 1970 datastore2 - 4a76f262-4ac21f0a-6bc1-0024e8314929 drwxr-xr-x 1 root root 8 Jan 1 1970 efd8efe3-03bc1cbf-15e0-080efd9e7379 ~ # touch /vmfs/foo.txt ~ # touch /vmfs/volumes/foo.txt touch: /vmfs/volumes/foo.txt: Operation not permitted I've googled and found nothing helpful. Does anyone out there have an idea as to what is going on? Thanks in Advance. Pete.

  Read the article

• ESXi 4.0 - cannot copy files

  - by user21368

  I am unable to copy files or make directories on my installation of VMWare ESXi 4.0. I have done so in the past (copied an iso onto a datastore). But something has changed and I have no idea what. I cannot copy using the datastore browser (get a dialog saying "Expected a PUT_FILE_DONE message. Got SESSION_COMPLETE"). I cannot create a directory through datastore browser (get a dialog saying "Cannot complete file creation operation"). When I ssh to the ESXi server I cannot create files or folders under /vmfs/volumes. But I can manipulate files elswhere (including /vmfs). Here are the permissions for the directories (I am logged in as root). ~ # ls -lh /vmfs/volumes/ drwxr-xr-t 1 root root 1.2k Sep 3 12:19 4a76f260-36b7eb85-c3b3-0024e8314929 drwxr-xr-x 1 root root 8 Jan 1 1970 4a76f261-d6190a9e-3b89-0024e8314929 drwxr-xr-t 1 root root 1.4k Sep 22 10:38 4a76f262-4ac21f0a-6bc1-0024e8314929 l--------- 0 root root 1.9k Jan 1 1970 Hypervisor1 - c42ce27f-eb8d7f70-7f70-0e7a85e8edc4 l--------- 0 root root 1.9k Jan 1 1970 Hypervisor2 - bbf1477b-4aec1d8c-caa5-5e8720bebd85 l--------- 0 root root 1.9k Jan 1 1970 Hypervisor3 - efd8efe3-03bc1cbf-15e0-080efd9e7379 drwxr-xr-x 1 root root 8 Jan 1 1970 bbf1477b-4aec1d8c-caa5-5e8720bebd85 drwxr-xr-x 1 root root 8 Jan 1 1970 c42ce27f-eb8d7f70-7f70-0e7a85e8edc4 l--------- 0 root root 1.9k Jan 1 1970 datastore1 - 4a76f260-36b7eb85-c3b3-0024e8314929 l--------- 0 root root 1.9k Jan 1 1970 datastore2 - 4a76f262-4ac21f0a-6bc1-0024e8314929 drwxr-xr-x 1 root root 8 Jan 1 1970 efd8efe3-03bc1cbf-15e0-080efd9e7379 ~ # touch /vmfs/foo.txt ~ # touch /vmfs/volumes/foo.txt touch: /vmfs/volumes/foo.txt: Operation not permitted I've googled and found nothing helpful. Does anyone out there have an idea as to what is going on? Thanks in Advance. Pete.

  Read the article

• htaccess redirect from subdomain to root

  - by Erin

  I'm hosting several domains on one account, and I currently have a RewriteRule set to redirect the root url (www.root.com) to a subdirectory (/public_html/root/). However, I have few directories in the root (/public_html/xyz/) that I would like to access from the root url (www.root.com/xyz). Is this possible to write a redirect for this, or do I have to place these folder in the /public_html/root/ directory? This is what I have for the .htaccess RewriteEngine on RewriteCond %{HTTP_HOST} ^(www.)?root.com$ RewriteCond %{REQUEST_URI} !^/root/ RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{HTTP_HOST} ^(www.)?hamiltonmehta.com$ RewriteRule ^(/)?$ hamiltonmehta/index.php [L] Thanks in advance!

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >