Search Results

Search found 529 results on 22 pages for 'wireshark'.

Page 12/22 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • Unexpected network traffic?

    - by robwalker
    My internet connection is via a fixed wireless connection using a 900MHz Motorola Canopy module. The router reports a fairly consistent 32-64Kbps of incoming traffic on the WAN port. When I attached a PC directly to the port and run Wireshark, I get a dump showing a lot of chatter from other machines that I presume are connected to the same tower. This didn't include end-to-end traffic, but was there were a lot of ARP requests, SSDP traffic, ICMP and other network discovery type stuff. Is this 'normal' or does it suggest a misconfiguration somewhere? As far as I can tell there is no need for my modem to be receiving any of this traffic (other than wanting to know what the names of my neighbours machines and printers are!) Since the internet connection is slow at the best of time, having this amount of background noise seems very wasteful.

    Read the article

  • How can i get SSO for alfresco on windows-7 to work?

    - by Maarten
    domain AD on windows 2008 R2, linux server alfresco 3.4c, windows-7 client. I'm trying to get automatically logged into alfresco from the windows-7 client. I've looked with wireshark to see what happens: 1. Client goes to /alfresco 2. Server sends Redirect to page 3. Client goes to Redirected page 4. Server sends a WWW-Authenticate: Negotiate header 5. Client DOES NOT respond to this how can i configure the windows-7 client (or the AD domain) so that the client will in fact engage with the SPNEGO protocol? instead of just asking for user credentials? (the user is logged in through kerberos in the domain.)

    Read the article

  • WLAN LED randomly blinking when there is no traffic

    - by mrc
    Hi, I've got a Linksys WUSB54GC WLAN USB interface (Ralink chipset) and I'm running Debian GNU/Linux 6.0. The LED very often randomly blinks although there is no traffic in the network. I checked this with Wireshark. Sometimes, but rarely, the LED stops blinking. The issue is present in Ubuntu and Fedora too. It was not present in Debian Lenny with Linux 2.6.28. I checked an old live cd with ubuntu 8.10 with kernel 2.6.27 and it was also OK. So I guess that's an issue with Linux kernel and its wireless driver or firmware. Has anybody observed a similar thing? Does anybody know how to help this annoying blinking? Thanks.

    Read the article

  • DNS protocol message example

    - by virtual-lab
    hello there, I am trying to figure out how to send out DNS messages from an application socket adapter to a DNSBL. I spent the last two days understanding the basics, including experimenting with WireShark to catch an example of message exchanged. Now I would like to query the DNS without using dig or host command (I'm using Ubuntu); how can I perform this action at low level, without the help of these tools in wrapping the request in a proper DNS message format? How the message should be post it? Hex or String? Thanks in advance for any help. Regards Alessandro Ilardo

    Read the article

  • hung up troubleshooting packet discards

    - by Chris Satola
    I realize my question is generic, but hopefully someone may have some guidance for me. My network consists of Cisco switches. I am seeing a significant amount (upwards of millions of packets per day) transmit drops between two switches. One being a 3750 and the other a 3560. The peak throughput of this link is only upper 400Mbps, so it shouldn't be a bandwidth issue. At this point, I am sort of clueless where to look or what tools I can use to determine what packets are dropping and why. I can setup a SPAN port on that link and wireshark it, but I don't know if that could tell me anything. Does anyone have any suggestions? Thanks in advance.

    Read the article

  • How do I install the EW-7318Ug wireless drivers?

    - by user69731
    I'm on Ubuntu 12.04 and I need to install & configure Internet connection. I want to use montor mode in Wireshark. After Ubuntu installation my wireless card was recognized but it doesn't connect to the Internet. Internal wireless card works well. What should I do? I'm new to Linux. PC:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 64:31:50:0f:d4:70 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:45 Base address:0x8000 eth1 Link encap:Ethernet HWaddr e0:2a:82:aa:2d:3e inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::e22a:82ff:feaa:2d3e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20978 errors:0 dropped:0 overruns:0 frame:364651 TX packets:20949 errors:171 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:19299119 (19.2 MB) TX bytes:3024858 (3.0 MB) Interrupt:19 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4788 errors:0 dropped:0 overruns:0 frame:0 TX packets:4788 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:387017 (387.0 KB) TX bytes:387017 (387.0 KB) wlan1 Link encap:Ethernet HWaddr 00:1f:1f:44:c1:a4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:10508 errors:0 dropped:0 overruns:0 frame:0 TX packets:6143 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14831319 (14.8 MB) TX bytes:644606 (644.6 KB) PC:~$ iwconfig lo no wireless extensions. wlan1 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:225 Noise level:162 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions.

    Read the article

  • capture nimbuzz traffic

    - by lurscher
    I need to capture all the traffic, specially during login, between nimbuzz pc client and nimbuzz server. The reason is that i need to debug outgoing packets at login that mark the user visibility status in order to reproduce them in a in-house XMPP client application I've tried doing this with wireshark, but i seem to be pretty helpless with this tool. Also, the packets i've been able to see are all before the SASL negotiation happens, after that, i cannot see the xml packets being exchanged any help for how to achieve this task is greatly appreciated (preferably on Windows, since there is no nimbuzz client for linux, in any case i can install one in a VM and monitor the traffic between the VM instance in the linux host)

    Read the article

  • negative time for a ping echo reply

    - by Mario
    I was happily pinging in the net when suddenly: Pinging X with 32 bytes of data: Reply from .235: bytes=32 time=1444ms TTL=41 Reply from .235: bytes=32 time=1767ms TTL=41 Reply from .235: bytes=32 time=1531ms TTL=41 Reply from .235: bytes=32 time=-1198187ms TTL=41 Ping statistics for .235: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1444ms, Maximum = -1198187ms, Average = 1073443462ms A negative time for the reply. I checked wireshark and it had the same values: Time delta from previous displayed frame: -1198.187867000 seconds Time since reference or first frame: -1179.935038000 seconds I didn't change the time of the machine while pinging. This was made in my local network at home, from a XP VM in windows 7. So I blame the VM (virtualbox). But I was wondering if this strange behaviour (to me) could have a reason, or if any of you have seen this before. Thank you bye.

    Read the article

  • How to force Windows 7 to ask for a "fresh" IP address from DHCP server?

    - by haimg
    I'm troubleshooting a certain issue with my DHCP configuration, and need my Windows machine to ask for a "fresh" IP address, so I can see which address DHCP server gives by default. When I do ipconfig /release followed by ipconfig /renew, Windows "proposes" its old IP address to the DHCP server (just checked with Wireshark, initial "DHCP Discover" message has Option-50 (requested IP address) with Windows machine's old IP). Tried disabling/enabling network adapter. Same behavior. Question: How can I force Windows to just ask for a new IP address, without proposing its old IP address.

    Read the article

  • Apache DVB http video Streaming bandwidth or priority problem

    - by igino manfre'
    I'm streaming few precompressed DVB videos from cloud. The streams are generated from VLC on "impossible" ports (such as 64085, 64086 etc) reverse proxed by Apache on port 80 and 8080. All the generated streams are listed in "http://95.110.164.61/indexv.html". From an ADSL connection with enough downlink bandwidth, recalling the stream generated by VLC (such as "http://95.110.164.61:64087/mpg2_6.4") it flows fluently. Recalling the same stream proxed by Apache ("http://95.110.164.61/mpg2_6.4") the stream stops and goes. The only situation in which the Apache proxed streams flow regularly is from a site connected through 64 Mbps warranted bandwith with RTT to the server less than 10 mseconds. Please note that streams below 2 Mbps are fluently proxed. The system is a single core xeon with windows 2008 R2 on 4 GB of RAM with 1 Gbps of network bandwidth. The drain of computational and bandwidth resources is negligeable, the RAM usage always lower than 50%. On the system I run many VLC streamers. Any of them drains a variable amount of RAM (from about 25 to 70 MB). On the contrary the couple of httpd.exe processes drain no more than 7 MB. Using Wireshark (on the server) I see that VLC directy send to the client much more packets than Apache, and the stream is framgmented on many frames. I'm not a programmer, a newby of Apache. Can anyone please address me to a specific portion of the Apache's huge documentation? Thank you. igino

    Read the article

  • How can I use an SSH tunnel for all traffic from a single application, without knowing the ports used?

    - by Matthew Read
    I have an application that opens connections on dozens of ports, and doesn't provide documentation about which ports it uses. I could use Wireshark or something to capture the traffic and export the ports from that, but I think it should be simpler than that. (And I'm not sure I would be able to cover all use cases and ensure the app used every single port it can ever use.) So I'm looking for a way to just say "forward all traffic from this application" (bonus points for all traffic from child processes as well) without needing to worry about specific ports. I'm sure there must be a way, but I couldn't hit on the right keywords while searching Google. How can I do this?

    Read the article

  • How to troubleshoot latency between 2 linux hosts

    - by Jimm
    The latency between 2 linux hosts is about .23ms. They are connected by one switch. Ping & Wireshark confirm the latency number. But, i dont have any visibility into what is causing this latency. How can i know if the latency is due to NIC on host A or B or the switch or the cables? UPDATE: The .23 ms latency is bad for my existing application, which sends messages at very high frequency and i am trying to see if it can be brought down to .1ms

    Read the article

  • scp to remote servers stalls, unable to isolate cause

    - by Rolf
    When I copy a large file (100+mb) to a remote server using scp it slows down from 2.7 mb/s to 100 kb/s and downward and then stalls. The problem is that I can't seem to isolate the problem. I've tried 2 different remote servers, using 2 local machines (1 osx, 1 windows/cygwin), using 2 different networks/isps and 2 different scp clients. All combinations give the problem except when I copy between the two remote servers (scp). Using wireshark I could not detect any traffic volume that would congest the network (although about 7 packets/sec with NBNS requests from the osx machine). What in the world could be going on? Given the combinations I've used there doesn't seem to be any overlap in the thing that could be causing the trouble.

    Read the article

  • ASA Slow IPSec Performance

    - by Brent
    I have a IPSec link between two sites over ASA 5520s running 8.4(3) and I am getting extremly poor performance when traffic passes over the VPN. CPU on the device is 13%, Memory at 408 MB, and active VPN sessions 2 so the load on the device is particularly low. Screenshot of wireshark file transfer between the two hosts over the VPN: The large amount of Header checksum failures is alarming, but I am not sure what to check now. I perf is showing around 4-5 Mbit/sec with differing TCP window sizes. Show Run on the ASA http://pastebin.com/uKM4Jh76 Show cry accelerator stats http://pastebin.com/xQahnqK3

    Read the article

  • How to prevent slow printer performance when AD is not available

    - by AKoran
    When I take a domain based computer (Windows XP) and plug it into a network that doesn't have access to the AD, the first time I select a local printer (printing directly to printer) on the current network it takes a good 20-30 seconds before I can select the printer. Doing a little investigating using wireshark I can see the computer is trying to hit AD for some reason and it just keeps timing out. I also tried the same experiment with just a plain workgroup computer and it was able to bring the printer up immediately. Does anyone know how to prevent the machine from trying to contact AD?

    Read the article

  • tcp handshake failed.client send rst (after syn-ack). can any one advice?

    - by user1495181
    architecture: 2 linux computer connected . on the second (192.168.1.1) one run apache server . I have a small program that take tcp packets from nfqueue change the dst ip to 192.168.1.1 in case that the dst ip is 192.168.1.2 (i know that i can do it with iptables , but my program will do more things in the future), fix check sum and return to the queue. if i call to telnet 192.168.1.1 , means that my program dosnt need to do any manipulation, handshake is OK. If i call to telnet 192.168.1.2 , my program change the dest. server get the syn and return syn-ack, but right after getting the syn-ack the client send rst. Can anyone advice? wireshark of the telnet tcpdump of the telenet above

    Read the article

  • Why does Pages.app connect to a server through https and keep the connection open?

    - by ggustafsson
    Every time i start up the program Pages (iWork) it connects to a server through https. What is going on? Why would Apple do this? I use no features under Pages that could warrant this behaviour. It connects to IP address 2.22.240.224 on port 443 and keeps the connection open until i close the application. All the info i can get from Wireshark is a bunch of Apple-related domain names. Edit: The same thing happens with Numbers. I have disabled "Documents & Data" on iCloud so that shouldn't be the reason why. Edit 2: The programs in the iWork suite stopped doing this after recent updates so it's not an issue anymore.

    Read the article

  • Download videos from youtube as I see it

    - by Sab
    This may seem a somewhat strange requirement : I want to download youtube videos as I see it. I know that I would have to capture the packets using a program like wireshark , and I do know that this is possible. So lets say I have 3 computers on my network and 1 smartphone. Lets say I view a youtube video on my phone. I now want this video to be recorded on any one of the computers so that I can see it later(record in the sense capture the packets so that I dont have to download it again and waste my bandwidth). Are there any programs which will do this for me? The reason I want this is I use IMediaShare to view youtube videos on my Tv. Now once I see a video if I want to see it at a later point of time I have to download the entire video again.

    Read the article

  • Windows Server 2008 R2 - Can't connect RDP over the Internet

    - by Jonathan DeMarks
    I have two networks: Domain and Public, Domain is a VPN connection and Public is the local connection to the network. This is not a domain controller or a DNS/DHCP server. I can connect via RDP from the local network (192.168.1.), from the VPN network (10.1.2.), and from the VPN network over the internet. I cannot connect from the internet (anywhere besides where the server is VPN'd) Wireshark indicates that the server is getting packets, and the audit log is indicating that the packets are being dropped. Advanced Firewall has explicit options to allow RDP, and has no deny policies. I have also tried turning Firewall off completely to no avail. I'm really lost on this one.

    Read the article

  • Why do some machines respond with many RST packets instead of RST-ACK to refuse a connection?

    - by Michael J. Gray
    I have recently been trying to track down a problem with one of our systems and have noticed that it is simply not allowed to connect to a remote machine. However, the remote machine (not controlled by us) is responding to our request for a connection with many TCP RST packets on a different port (26469, 26497, 26498) than the one we originated on (53). It simply wouldn't let up at one point and flooded us with about 10 packets/second for an hour or two of only RST on those obscure high ports. Out of the thousands of nodes we're connecting to, this is the only one ever to show this behavior. What could possibly cause this? EDIT Below is a screenshot of Wireshark when it happened. I don't have the actual dump anymore and can't reproduce this specific scenario every time. Basically, we sent a SYN and immediately got RST on an odd port and so we respond with RST and just keep going back and forth.

    Read the article

  • Web server suddenly stopped working

    - by wezten
    I have a web server, which was working fine. It also was an FTP server and a Windows Remote Desktop server, all working fine. Someone called our ISP to increase the internet speed, and suddenly nothing works - I can connect with Teamviewer, but HTTP, FTP & RD doesn't work. Disabled firewall. Ran Wireshark - the packets don't come through at all. Set the webserver to port 20111, in case the ISP is blocking port 80, and again, the packets didn't come through at all. (localhost:20111 works fine) Port forwarding is set up for ports 80, 21, 3389 & 20111 to 10.0.0.32 (which is the correct address - checked with ipconfig). Restarted router and computer. I would be very grateful for any help.

    Read the article

  • Dns works, can ping, but cannot load web pages in browser

    - by user1224595
    Yesterday I changed routers, and my desktop computer started acting up. I could ping websites, and nslookup was able to resolve names to addresses, but neither chrome, firefox, nor ie could load any webpages. None of my other computers connected to the same wireless router have any problems. I connect my desktop to the router through a cheap wifi dongle. I did a wireshark capture of the browser request, and I have uploaded the pcap here. https://drive.google.com/file/d/0B7AsPdhWc-SwbTV0bUJLQXo4UUE/edit?usp=sharing One strange thing I noticed was the spamming of ssdp packets. I am not super familiar with networking, but it seems that it is not a problem with the router, as dns works, and so does dhcp (the desktop is assigned an address correctly). Any help would be appreciated.

    Read the article

  • Information I need to know as a Java Developer [on hold]

    - by Woy
    I'm a java developer. I'm trying to get more knowledge to become a better programmer. I've listed a number of technologies to learn. Instead of what I've listed, what technologies would you suggest to learn as well for a Junior Java Developer? I realize, there's a lot of things to study. Java: - how a garbage collector works - resource management - network programming - TCP/IP HTTP - transactions, - consistency: interfaces, classes collections, hash codes, algorithms, comp. complexity concurrent programming: synchronizing, semafores steam management metability: thread-safety byte code manipulations, reflections, Aspect-Oriented Programming as base to understand frameworks such as Spring etc. Web stack: servlets, filters, socket programming Libraries: JDK, GWT, Apache Commons, Joda-Time, Dependency Injections: Spring, Nano Tools: IDE: very good knowledge - debugger - profiler - web analyzers: Wireshark, firebugs - unit testing SQL/Databases: Basics SELECTing columns from a table Aggregates Part 1: COUNT, SUM, MAX/MIN Aggregates Part 2: DISTINCT, GROUP BY, HAVING + Intermediate JOINs, ANSI-89 and ANSI-92 syntax + UNION vs UNION ALL x NULL handling: COALESCE & Native NULL handling Subqueries: IN, EXISTS, and inline views Subqueries: Correlated ITH syntax: Subquery Factoring/CTE Views Advanced Topics Functions, Stored Procedures, Packages Pivoting data: CASE & PIVOT syntax Hierarchical Queries Cursors: Implicit and Explicit Triggers Dynamic SQL Materialized Views Query Optimization: Indexes Query Optimization: Explain Plans Query Optimization: Profiling Data Modelling: Normal Forms, 1 through 3 Data Modelling: Primary & Foreign Keys Data Modelling: Table Constraints Data Modelling: Link/Corrollary Tables Full Text Searching XML Isolation Levels Entity Relationship Diagrams (ERDs), Logical and Physical Transactions: COMMIT, ROLLBACK, Error Handling

    Read the article

  • Redirect traffic to local address so iOS speedtest app measures LAN speed

    - by ivan_sig
    I have mounted a Speedtest Mini server on a local LAMP, so I can test my LAN speeds effortlessly just by opening the URL with a Flash enabled web browser, the thing is, I want my iOS and Android devices to test with the LAN server too, not with the WAN, as I'm trying to measure LAN-Only performance. Is there a way so I can redirect the traffic intended to an specific external IP (The one of the real server) to my local server?. I know the servers IP as a short Wireshark analysis gave me the data, but still searching for a way to make that redirect. I have Jailbreak and root on my devices, so playing with system files is not a problem. I've tried mounting a proxy and making redirects by the hosts file and domain names, but it looks like Ookla's app relies on IP address only.

    Read the article

  • How do I view the location of an swf file that is obfuscated somehow.

    - by atticus
    Specifically, I'm trying to view Elmo's Keyboard-o-rama fullscreen. The original swf file has been moved and obscured. For a toddler, this game really needs to be full screen! The toddler doesn't mind too much and has already lost interest in the game for the day. But it's just driving me crazy. I've tried the usual method of viewing the page info in Firefox to no avail. And before people start trying to delete this for being game specific, I would like to know how to do this for any obfuscated swf location, not just games. Thanks in advance. If anybody knows how to find the appropriate information in tcpdump or wireshark, that could probably help, too. That's what I'm trying to do right now.

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >