Search Results

Search found 3044 results on 122 pages for 'apc smart ups'.

Page 120/122 | < Previous Page | 116 117 118 119 120 121 122  | Next Page >

• External USB attached drive works in Windows XP but not in Windows 7. How to fix?

  - by irrational John

  Earlier this week I purchased this "N52300 EZQuest Pro" external hard drive enclosure from here. I can connect the enclosure using USB 2.0 and access the files in both NTFS partitions on the MBR partitioned drive when I use either Windows XP (SP3) or Mac OS X 10.6. So it works as expected in XP & Snow Leopard. However, the enclosure does not work in Windows 7 (Home Premium) either 64-bit or 32-bit or in Ubuntu 10.04 (kernel 2.6.32-23-generic). I'm thinking this must be a Windows 7 driver problem because the enclosure works in XP & Snow Leopard. I do know that no special drivers are required to use this enclosure. It is supported using the USB mass storage drivers included with XP and OS X. It should also work fine using the mass storage support in Windows 7, no? FWIW, I have also tried using 32-bit Windows 7 on both my desktop, a Gigabyte GA-965P-DS3 with a Pentium Dual-Core E6500 @ 2.93GHz, and on my early 2008 MacBook. I see the same failure in both cases that I see with 64-bit Windows 7. So it doesn't appear to be specific to one hardware platform. I'm hoping someone out there can help me either get the enclosure to work in Windows 7 or convince me that the enclosure hardware is bad and should be RMAed. At the moment though an RMA seems pointless since this appears to be a (Windows 7) device driver problem. I have tried to track down any updates to the mass storage drivers included with Windows 7 but have so far come up empty. Heck, I can't even figure out how to place a bug report with Microsoft since apparently the grace period for Windows 7 email support is only a few months. I came across a link to some USB troubleshooting steps in another question. I haven't had a chance to look over the suggestions on that site or try them yet. Maybe tomorrow if I have time ... ;-) I'll finish up with some more details about the problem. When I connect the enclosure using USB to Windows 7 at first it appears everything worked. Windows detects the drive and installs a driver for it. Looking in Device Manager there is an entry under the Hard Drives section with the title, Hitachi HDT721010SLA360 USB Device. When you open Windows Disk Management the first time after the enclosure has been attached the drive appears as "Not initialize" and I'm prompted to initialize it. This is bogus. After all, the drive worked fine in XP so I know it has already been initialized, partitioned, and formatted. So of course I never try to initialize it "again". (It's a 1 GB drive and I don't want to lose the data on it). Except for this first time, the drive never shows up in Disk Management again unless I uninstall the Hitachi HDT721010SLA360 USB Device entry under Hard Drives, unplug, and then replug the enclosure. If I do that then the process in the previous paragraph repeats. In Ubuntu the enclosure never shows up at all at the file system level. Below are an excerpt from kern.log and an excerpt from the result of lsusb -v after attaching the enclosure. It appears that Ubuntu at first recongnizes the enclosure and is attempting to attach it, but encounters errors which prevent it from doing so. Unfortunately, I don't know whether any of this info is useful or not. excerpt from kern.log [ 2684.240015] usb 1-2: new high speed USB device using ehci_hcd and address 22 [ 2684.393618] usb 1-2: configuration #1 chosen from 1 choice [ 2684.395399] scsi17 : SCSI emulation for USB Mass Storage devices [ 2684.395570] usb-storage: device found at 22 [ 2684.395572] usb-storage: waiting for device to settle before scanning [ 2689.390412] usb-storage: device scan complete [ 2689.390894] scsi 17:0:0:0: Direct-Access Hitachi HDT721010SLA360 ST6O PQ: 0 ANSI: 4 [ 2689.392237] sd 17:0:0:0: Attached scsi generic sg7 type 0 [ 2689.395269] sd 17:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2689.395632] sd 17:0:0:0: [sde] Write Protect is off [ 2689.395636] sd 17:0:0:0: [sde] Mode Sense: 11 00 00 00 [ 2689.395639] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412003] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412009] sde: sde1 sde2 [ 2689.455759] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.455765] sd 17:0:0:0: [sde] Attached SCSI disk [ 2692.620017] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2707.740014] usb 1-2: device descriptor read/64, error -110 [ 2722.970103] usb 1-2: device descriptor read/64, error -110 [ 2723.200027] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2738.320019] usb 1-2: device descriptor read/64, error -110 [ 2753.550024] usb 1-2: device descriptor read/64, error -110 [ 2753.780020] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2758.810147] usb 1-2: device descriptor read/8, error -110 [ 2763.940142] usb 1-2: device descriptor read/8, error -110 [ 2764.170014] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2769.200141] usb 1-2: device descriptor read/8, error -110 [ 2774.330137] usb 1-2: device descriptor read/8, error -110 [ 2774.440069] usb 1-2: USB disconnect, address 22 [ 2774.440503] sd 17:0:0:0: Device offlined - not ready after error recovery [ 2774.590023] usb 1-2: new high speed USB device using ehci_hcd and address 23 [ 2789.710020] usb 1-2: device descriptor read/64, error -110 [ 2804.940020] usb 1-2: device descriptor read/64, error -110 [ 2805.170026] usb 1-2: new high speed USB device using ehci_hcd and address 24 [ 2820.290019] usb 1-2: device descriptor read/64, error -110 [ 2835.520027] usb 1-2: device descriptor read/64, error -110 [ 2835.750018] usb 1-2: new high speed USB device using ehci_hcd and address 25 [ 2840.780085] usb 1-2: device descriptor read/8, error -110 [ 2845.910079] usb 1-2: device descriptor read/8, error -110 [ 2846.140023] usb 1-2: new high speed USB device using ehci_hcd and address 26 [ 2851.170112] usb 1-2: device descriptor read/8, error -110 [ 2856.300077] usb 1-2: device descriptor read/8, error -110 [ 2856.410027] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2856.730033] usb 3-2: new full speed USB device using uhci_hcd and address 11 [ 2871.850017] usb 3-2: device descriptor read/64, error -110 [ 2887.080014] usb 3-2: device descriptor read/64, error -110 [ 2887.310011] usb 3-2: new full speed USB device using uhci_hcd and address 12 [ 2902.430021] usb 3-2: device descriptor read/64, error -110 [ 2917.660013] usb 3-2: device descriptor read/64, error -110 [ 2917.890016] usb 3-2: new full speed USB device using uhci_hcd and address 13 [ 2922.911623] usb 3-2: device descriptor read/8, error -110 [ 2928.051753] usb 3-2: device descriptor read/8, error -110 [ 2928.280013] usb 3-2: new full speed USB device using uhci_hcd and address 14 [ 2933.301876] usb 3-2: device descriptor read/8, error -110 [ 2938.431993] usb 3-2: device descriptor read/8, error -110 [ 2938.540073] hub 3-0:1.0: unable to enumerate USB device on port 2 excerpt from lsusb -v Bus 001 Device 017: ID 0dc4:0000 Macpower Peripherals, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0dc4 Macpower Peripherals, Ltd idProduct 0x0000 bcdDevice 0.01 iManufacturer 1 EZ QUEST iProduct 2 USB Mass Storage iSerial 3 220417 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Config0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 Interface0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Update: Results using Firewire to connect. Today I recieved a 1394b 9 pin to 1394a 6 pin cable which allowed me to connect the "EZQuest Pro" via Firewire. Everything works. When I use Firewire I can connect whether I'm using Windows 7 or Ubuntu 10.04. I even tried booting my Gigabyte desktop as an OS X 10.6.3 Hackintosh and it worked there as well. (Though if I recall correctly, it also worked when using USB 2.0 and booting OS X on the desktop. Certainly it works with USB 2.0 and my MacBook.) I believe the firmware on the device is at the latest level available, v1.07. I base this on the excerpt below from the OS X System Profiler which shows Firmware Revision: 0x107. Bottom line: It's nice that the enclosure is actually usable when I connect with Firewire. But I am still searching for an answer as to why it does not work correctly when using USB 2.0 in Windows 7 (and Ubuntu ... but really Windows 7 is my biggest concern). OXFORD IDE Device 1: Manufacturer: EZ QUEST Model: 0x0 GUID: 0x1D202E0220417 Maximum Speed: Up to 800 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: OXFORD IDE Device 1 Unit: Unit Software Version: 0x10483 Unit Spec ID: 0x609E Firmware Revision: 0x107 Product Revision Level: ST6O Sub-units: OXFORD IDE Device 1 SBP-LUN: Capacity: 1 TB (1,000,204,886,016 bytes) Removable Media: Yes BSD Name: disk3 Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Not Supported

  Read the article

• What strategy do you use for package naming in Java projects and why?

  - by Tim Visher

  I thought about this awhile ago and it recently resurfaced as my shop is doing its first real Java web app. As an intro, I see two main package naming strategies. (To be clear, I'm not referring to the whole 'domain.company.project' part of this, I'm talking about the package convention beneath that.) Anyway, the package naming conventions that I see are as follows: Functional: Naming your packages according to their function architecturally rather than their identity according to the business domain. Another term for this might be naming according to 'layer'. So, you'd have a *.ui package and a *.domain package and a *.orm package. Your packages are horizontal slices rather than vertical. This is much more common than logical naming. In fact, I don't believe I've ever seen or heard of a project that does this. This of course makes me leery (sort of like thinking that you've come up with a solution to an NP problem) as I'm not terribly smart and I assume everyone must have great reasons for doing it the way they do. On the other hand, I'm not opposed to people just missing the elephant in the room and I've never heard a an actual argument for doing package naming this way. It just seems to be the de facto standard. Logical: Naming your packages according to their business domain identity and putting every class that has to do with that vertical slice of functionality into that package. I have never seen or heard of this, as I mentioned before, but it makes a ton of sense to me. I tend to approach systems vertically rather than horizontally. I want to go in and develop the Order Processing system, not the data access layer. Obviously, there's a good chance that I'll touch the data access layer in the development of that system, but the point is that I don't think of it that way. What this means, of course, is that when I receive a change order or want to implement some new feature, it'd be nice to not have to go fishing around in a bunch of packages in order to find all the related classes. Instead, I just look in the X package because what I'm doing has to do with X. From a development standpoint, I see it as a major win to have your packages document your business domain rather than your architecture. I feel like the domain is almost always the part of the system that's harder to grok where as the system's architecture, especially at this point, is almost becoming mundane in its implementation. The fact that I can come to a system with this type of naming convention and instantly from the naming of the packages know that it deals with orders, customers, enterprises, products, etc. seems pretty darn handy. It seems like this would allow you to take much better advantage of Java's access modifiers. This allows you to much more cleanly define interfaces into subsystems rather than into layers of the system. So if you have an orders subsystem that you want to be transparently persistent, you could in theory just never let anything else know that it's persistent by not having to create public interfaces to its persistence classes in the dao layer and instead packaging the dao class in with only the classes it deals with. Obviously, if you wanted to expose this functionality, you could provide an interface for it or make it public. It just seems like you lose a lot of this by having a vertical slice of your system's features split across multiple packages. I suppose one disadvantage that I can see is that it does make ripping out layers a little bit more difficult. Instead of just deleting or renaming a package and then dropping a new one in place with an alternate technology, you have to go in and change all of the classes in all of the packages. However, I don't see this is a big deal. It may be from a lack of experience, but I have to imagine that the amount of times you swap out technologies pales in comparison to the amount of times you go in and edit vertical feature slices within your system. So I guess the question then would go out to you, how do you name your packages and why? Please understand that I don't necessarily think that I've stumbled onto the golden goose or something here. I'm pretty new to all this with mostly academic experience. However, I can't spot the holes in my reasoning so I'm hoping you all can so that I can move on. Thanks in advance!

  Read the article

• EC2 instance suddenly refusing SSH connections and won't respond to ping

  - by Chris

  My instance was running fine and this morning I was able to access a Ruby on Rails app hosted on it. An hour later I suddenly wasn't able to access my site, my SSH connection attempts were refused and the server wasn't even responding to ping. I didn't change anything on my system during that hour and reboots aren't fixing it. I've never had any problems connecting or pinging the system before. Can someone please help? This is on my production system! OS: CentOS 5 AMI ID: ami-10b55379 Type: m1.small [] ~% ssh -v *****@meeteor.com OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to meeteor.com [184.73.235.191] port 22. debug1: connect to address 184.73.235.191 port 22: Connection refused ssh: connect to host meeteor.com port 22: Connection refused [] ~% ping meeteor.com PING meeteor.com (184.73.235.191): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 ^C --- meeteor.com ping statistics --- 4 packets transmitted, 0 packets received, 100.0% packet loss [] ~% ========= System Log ========= Restarting system. Linux version 2.6.16-xenU ([email protected]) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 SMP Mon May 28 03:41:49 SAST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000006a400000 (usable) 980MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active IRQ lockup detection disabled Built 1 zonelists Kernel command line: root=/dev/sda1 ro 4 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Xen reported: 2599.998 MHz processor. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: ee000000-f53fe000, maxmem 2d7fe000 Memory: 1718700k/1748992k available (1958k kernel code, 20948k reserved, 620k data, 144k init, 1003528k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5202.30 BogoMIPS (lpj=26011526) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Checking 'hlt' instruction... OK. Brought up 1 CPUs migration_cost=0 Grant table initialized NET: Registered protocol family 16 Brought up 1 CPUs xen_mem: Initialising balloon driver. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered i8042.c: No controller found. RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Xen virtual console successfully installed as tty1 Event-channel device installed. netfront: Initialising virtual ethernet driver. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 Registering block device major 8 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI No-Shortcut mode md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 144k freed *************************************************************** *************************************************************** ** WARNING: Currently emulating unsupported memory accesses ** ** in /lib/tls glibc libraries. The emulation is ** ** slow. To ensure full performance you should ** ** install a 'xen-friendly' (nosegneg) version of ** ** the library, or disable tls support by executing ** ** the following as root: ** ** mv /lib/tls /lib/tls.disabled ** ** Offending process: init (pid=1) ** *************************************************************** *************************************************************** Pausing... 5Pausing... 4Pausing... 3Pausing... 2Pausing... 1Continuing... INIT: version 2.86 booting Welcome to CentOS release 5.4 (Final) Press 'I' to enter interactive startup. Setting clock : Fri Oct 1 14:35:26 EDT 2010 [ OK ] Starting udev: [ OK ] Setting hostname localhost.localdomain: [ OK ] No devices found Setting up Logical Volume Management: [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1 /dev/sda1: clean, 275424/1310720 files, 1161123/2621440 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 4 Entering non-interactive startup Starting background readahead: [ OK ] Applying ip6tables firewall rules: modprobe: FATAL: Module ip6_tables not found. ip6tables-restore v1.3.5: ip6tables-restore: unable to initializetable 'filter' Error occurred at line: 3 Try `ip6tables-restore -h' or 'ip6tables-restore --help' for more information. [FAILED] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_ns [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... done. [ OK ] Starting auditd: [FAILED] Starting irqbalance: [ OK ] Starting portmap: [ OK ] FATAL: Module lockd not found. Starting NFS statd: [ OK ] Starting RPC idmapd: FATAL: Module sunrpc not found. FATAL: Error running install command for sunrpc Error: RPC MTAB does not exist. Starting system message bus: [ OK ] Starting Bluetooth services:[ OK ] [ OK ] Can't open RFCOMM control socket: Address family not supported by protocol Mounting other filesystems: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting hidd: Can't open HIDP control socket: Address family not supported by protocol [FAILED] Starting autofs: Starting automount: automount: test mount forbidden or incorrect kernel protocol version, kernel protocol version 5.00 or above required. [FAILED] [FAILED] Starting sshd: [ OK ] Starting cups: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: no console device found[FAILED] Starting crond: [ OK ] Starting xfs: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 390 100 390 0 0 58130 0 --:--:-- --:--:-- --:--:-- 58130 100 390 100 390 0 0 56984 0 --:--:-- --:--:-- --:--:-- 0 Starting yum-updatesd: [ OK ] Starting Avahi daemon... [ OK ] Starting HAL daemon: [ OK ] Starting OSSEC: [ OK ] Starting smartd: [ OK ] c CentOS release 5.4 (Final) Kernel 2.6.16-xenU on an i686 domU-12-31-39-00-C4-97 login: INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes

  Read the article

• Perl cron job stays running

  - by Dylan

  I'm currently using a cron job to have a Perl script that tells my Arduino to cycle my aquaponics system and all is well, except the Perl script doesn't die as intended. Here is my cron job: */15 * * * * /home/dburke/scripts/hal/bin/main.pl cycle And below is my Perl script: #!/usr/bin/perl -w # Sample Perl script to transmit number # to Arduino then listen for the Arduino # to echo it back use strict; use Device::SerialPort; use Switch; use Time::HiRes qw ( alarm ); $|++; # Set up the serial port # 19200, 81N on the USB ftdi driver my $device = '/dev/arduino0'; # Tomoc has to use a different tty for testing #$device = '/dev/ttyS0'; my $port = new Device::SerialPort ($device) or die('Unable to open connection to device');; $port->databits(8); $port->baudrate(19200); $port->parity("none"); $port->stopbits(1); my $lastChoice = ' '; my $pid = fork(); my $signalOut; my $args = shift(@ARGV); # Parent must wait for child to exit before exiting itself on CTRL+C $SIG{'INT'} = sub { waitpid($pid,0) if $pid != 0; exit(0); }; # What child process should do if($pid == 0) { # Poll to see if any data is coming in print "\nListening...\n\n"; while (1) { my $incmsg = $port->lookfor(9); # If we get data, then print it if ($incmsg) { print "\nFrom arduino: " . $incmsg . "\n\n"; } } } # What parent process should do else { if ($args eq "cycle") { my $stop = 0; sleep(1); $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; $stop = 1; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); while ($stop == 0) { sleep(2); } die "Done."; } else { sleep(1); my $choice = ' '; print "Please pick an option you'd like to use:\n"; while(1) { print " [1] Cycle [2] Relay OFF [3] Relay ON [4] Config [$lastChoice]: "; chomp($choice = <STDIN>); switch ($choice) { case /1/ { $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); $lastChoice = $choice; } case /2/ { $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2"; $lastChoice = $choice; } case /3/ { $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1"; $lastChoice = $choice; } case /4/ { print "There is no configuration available yet. Please stab the developer."; } else { print "Please select a valid option.\n\n"; } } } } } Why wouldn't it die from the statement die "Done.";? It runs fine from the command line and also interprets the 'cycle' argument fine. When it runs in cron it runs fine, however, the process never dies and while each process doesn't continue to cycle the system it does seem to be looping in some way due to the fact that it ups my system load very quickly. If you'd like more information, just ask. EDIT: I have changed to code to: #!/usr/bin/perl -w # Sample Perl script to transmit number # to Arduino then listen for the Arduino # to echo it back use strict; use Device::SerialPort; use Switch; use Time::HiRes qw ( alarm ); $|++; # Set up the serial port # 19200, 81N on the USB ftdi driver my $device = '/dev/arduino0'; # Tomoc has to use a different tty for testing #$device = '/dev/ttyS0'; my $port = new Device::SerialPort ($device) or die('Unable to open connection to device');; $port->databits(8); $port->baudrate(19200); $port->parity("none"); $port->stopbits(1); my $lastChoice = ' '; my $signalOut; my $args = shift(@ARGV); # Parent must wait for child to exit before exiting itself on CTRL+C if ($args eq "cycle") { open (LOG, '>>log.txt'); print LOG "Cycle started.\n"; my $stop = 0; sleep(2); $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; $stop = 1; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; print LOG "Alarm is being set.\n"; alarm (420); print LOG "Alarm is set.\n"; while ($stop == 0) { print LOG "In while-sleep loop.\n"; sleep(2); } print LOG "The loop has been escaped.\n"; die "Done."; print LOG "No one should ever see this."; } else { my $pid = fork(); $SIG{'INT'} = sub { waitpid($pid,0) if $pid != 0; exit(0); }; # What child process should do if($pid == 0) { # Poll to see if any data is coming in print "\nListening...\n\n"; while (1) { my $incmsg = $port->lookfor(9); # If we get data, then print it if ($incmsg) { print "\nFrom arduino: " . $incmsg . "\n\n"; } } } # What parent process should do else { sleep(1); my $choice = ' '; print "Please pick an option you'd like to use:\n"; while(1) { print " [1] Cycle [2] Relay OFF [3] Relay ON [4] Config [$lastChoice]: "; chomp($choice = <STDIN>); switch ($choice) { case /1/ { $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); $lastChoice = $choice; } case /2/ { $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2"; $lastChoice = $choice; } case /3/ { $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1"; $lastChoice = $choice; } case /4/ { print "There is no configuration available yet. Please stab the developer."; } else { print "Please select a valid option.\n\n"; } } } } }

  Read the article

• Finding the heaviest length-constrained path in a weighted Binary Tree

  - by Hristo

  UPDATE I worked out an algorithm that I think runs in O(n*k) running time. Below is the pseudo-code: routine heaviestKPath( T, k ) // create 2D matrix with n rows and k columns with each element = -8 // we make it size k+1 because the 0th column must be all 0s for a later // function to work properly and simplicity in our algorithm matrix = new array[ T.getVertexCount() ][ k + 1 ] (-8); // set all elements in the first column of this matrix = 0 matrix[ n ][ 0 ] = 0; // fill our matrix by traversing the tree traverseToFillMatrix( T.root, k ); // consider a path that would arc over a node globalMaxWeight = -8; findArcs( T.root, k ); return globalMaxWeight end routine // node = the current node; k = the path length; node.lc = node’s left child; // node.rc = node’s right child; node.idx = node’s index (row) in the matrix; // node.lc.wt/node.rc.wt = weight of the edge to left/right child; routine traverseToFillMatrix( node, k ) if (node == null) return; traverseToFillMatrix(node.lc, k ); // recurse left traverseToFillMatrix(node.rc, k ); // recurse right // in the case that a left/right child doesn’t exist, or both, // let’s assume the code is smart enough to handle these cases matrix[ node.idx ][ 1 ] = max( node.lc.wt, node.rc.wt ); for i = 2 to k { // max returns the heavier of the 2 paths matrix[node.idx][i] = max( matrix[node.lc.idx][i-1] + node.lc.wt, matrix[node.rc.idx][i-1] + node.rc.wt); } end routine // node = the current node, k = the path length routine findArcs( node, k ) if (node == null) return; nodeMax = matrix[node.idx][k]; longPath = path[node.idx][k]; i = 1; j = k-1; while ( i+j == k AND i < k ) { left = node.lc.wt + matrix[node.lc.idx][i-1]; right = node.rc.wt + matrix[node.rc.idx][j-1]; if ( left + right > nodeMax ) { nodeMax = left + right; } i++; j--; } // if this node’s max weight is larger than the global max weight, update if ( globalMaxWeight < nodeMax ) { globalMaxWeight = nodeMax; } findArcs( node.lc, k ); // recurse left findArcs( node.rc, k ); // recurse right end routine Let me know what you think. Feedback is welcome. I think have come up with two naive algorithms that find the heaviest length-constrained path in a weighted Binary Tree. Firstly, the description of the algorithm is as follows: given an n-vertex Binary Tree with weighted edges and some value k, find the heaviest path of length k. For both algorithms, I'll need a reference to all vertices so I'll just do a simple traversal of the Tree to have a reference to all vertices, with each vertex having a reference to its left, right, and parent nodes in the tree. Algorithm 1 For this algorithm, I'm basically planning on running DFS from each node in the Tree, with consideration to the fixed path length. In addition, since the path I'm looking for has the potential of going from left subtree to root to right subtree, I will have to consider 3 choices at each node. But this will result in a O(n*3^k) algorithm and I don't like that. Algorithm 2 I'm essentially thinking about using a modified version of Dijkstra's Algorithm in order to consider a fixed path length. Since I'm looking for heaviest and Dijkstra's Algorithm finds the lightest, I'm planning on negating all edge weights before starting the traversal. Actually... this doesn't make sense since I'd have to run Dijkstra's on each node and that doesn't seem very efficient much better than the above algorithm. So I guess my main questions are several. Firstly, do the algorithms I've described above solve the problem at hand? I'm not totally certain the Dijkstra's version will work as Dijkstra's is meant for positive edge values. Now, I am sure there exist more clever/efficient algorithms for this... what is a better algorithm? I've read about "Using spine decompositions to efficiently solve the length-constrained heaviest path problem for trees" but that is really complicated and I don't understand it at all. Are there other algorithms that tackle this problem, maybe not as efficiently as spine decomposition but easier to understand? Thanks.

  Read the article

• Trying to configure HWIC-3G-HSPA

  - by user1174838

  I'm trying to configure a couple of Cisco 1941 routes. The are both identical routers. Each as a HWIC-1T (Smart Serial interface) and a HWIC-3G-HSPA 3G interface. These routers are to be sent to remote sites. We have connectivity to one of the sites but if remote site A gors down we lose connectivity to remote site B. The HWIC-1T is the primary WAN interface using frame relay joining the two remote sites We want the HWIC-3G-HSPA to be usable for direct connectivity from head office to remote site B, and also the HWIC-3G-HSPA is do be used for comms between the remote sites when the frame relay is down (happens quite a bit). I initialy tried to do dynamic routing using EIGRP however in my lab setup of laptop - 1941 - 1941 - laptop, I was unable to get end to end connectivity. I later settled on static routing and have got end to end connectivity but only over frame relay, not the HWIC-3G-HSPA. The sanitized running config for remote site A: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteA ! boot-start-marker boot-end-marker ! ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" ! username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.2.5 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.2 255.255.255.252 encapsulation frame-relay cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.3.0 255.255.255.0 10.1.1.1 permanent ip route 192.168.3.0 255.255.255.0 Cellular0/1/0 210 permanent ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The sanitized running config for remote site B: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteB ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! no ip domain lookup ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.3.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.1 255.255.255.252 encapsulation frame-relay clock rate 2000000 cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi frame-relay intf-type dce ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored ppp ipcp dns request cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.2.0 255.255.255.0 10.1.1.2 permanent ip route 192.168.2.0 255.255.255.0 Cellular0/1/0 210 permanent ! kron occurrence PING in 1 recurring policy-list ICMP ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The last problem I'm having is the 3G interfaces go down after only a few minutes of inactivity. I've tried using kron to ping the local HWIC-3G-HSPA interface (cellular 0/1/0) every minute but that hasn't been successful. Manually pinging the IP assigned (by the telco) to ce0/1/0 does bring the interface up. Any ideas? Thanks

  Read the article

• PHP, MySQL, jQuery, AJAX: json data returns correct response but frontend returns error

  - by Devner

  Hi all, I have a user registration form. I am doing server side validation on the fly via AJAX. The quick summary of my problem is that upon validating 2 fields, I get error for the second field validation. If I comment first field, then the 2nd field does not show any error. It has this weird behavior. More details below: The HTML, JS and Php code are below: HTML FORM: <form id="SignupForm" action=""> <fieldset> <legend>Free Signup</legend> <label for="username">Username</label> <input name="username" type="text" id="username" /><span id="status_username"></span><br /> <label for="email">Email</label> <input name="email" type="text" id="email" /><span id="status_email"></span><br /> <label for="confirm_email">Confirm Email</label> <input name="confirm_email" type="text" id="confirm_email" /><span id="status_confirm_email"></span><br /> </fieldset> <p> <input id="sbt" type="button" value="Submit form" /> </p> </form> JS: <script type="text/javascript"> $(document).ready(function() { $("#email").blur(function() { var email = $("#email").val(); var msgbox2 = $("#status_email"); if(email.length > 3) { $.ajax({ type: 'POST', url: 'check_ajax2.php', data: "email="+ email, dataType: 'json', cache: false, success: function(data) { if(data.success == 'y') { alert('Available'); } else { alert('Not Available'); } } }); } return false; }); $("#confirm_email").blur(function() { var confirm_email = $("#confirm_email").val(); var email = $("#email").val(); var msgbox3 = $("#status_confirm_email"); if(confirm_email.length > 3) { $.ajax({ type: 'POST', url: 'check_ajax2.php', data: 'confirm_email='+ confirm_email + '&email=' + email, dataType: 'json', cache: false, success: function(data) { if(data.success == 'y') { alert('Available'); } else { alert('Not Available'); } } , error: function (data) { alert('Some error'); } }); } return false; }); }); </script> PHP code: <?php //check_ajax2.php if(isset($_POST['email'])) { $email = $_POST['email']; $res = mysql_query("SELECT uid FROM members WHERE email = '$email' "); $i_exists = mysql_num_rows($res); if( 0 == $i_exists ) { $success = 'y'; $msg_email = 'Email available'; } else { $success = 'n'; $msg_email = 'Email is already in use.</font>'; } print json_encode(array('success' => $success, 'msg_email' => $msg_email)); } if(isset($_POST['confirm_email'])) { $confirm_email = $_POST['confirm_email']; $email = ( isset($_POST['email']) && trim($_POST['email']) != '' ? $_POST['email'] : '' ); $res = mysql_query("SELECT uid FROM members WHERE email = '$confirm_email' "); $i_exists = mysql_num_rows($res); if( 0 == $i_exists ) { if( isset($email) && isset($confirm_email) && $email == $confirm_email ) { $success = 'y'; $msg_confirm_email = 'Email available and match'; } else { $success = 'n'; $msg_confirm_email = 'Email and Confirm Email do NOT match.'; } } else { $success = 'n'; $msg_confirm_email = 'Email already exists.'; } print json_encode(array('success' => $success, 'msg_confirm_email' => $msg_confirm_email)); } ?> THE PROBLEM: As long as I am validating the $_POST['email'] as well as $_POST['confirm_email'] in the check_ajax2.php file, the validation for confirm_email field always returns an error. With my limited knowledge of Firebug, however, I did find out that the following were the responses when I entered email and confirm_email in the fields: RESPONSE 1: {"success":"y","msg_email":"Email available"} RESPONSE 2: {"success":"y","msg_email":"Email available"}{"success":"n","msg_confirm_email":"Email and Confirm Email do NOT match."} Although the RESPONSE 2 shows that we are receiving the correct message via msg_confirm_email, in the front end, the alert 'Some error' is popping up (I have enabled the alert for debugging). I have spent 48 hours trying to change every part of the code wherever possible, but with only little success. What is weird about this is that if I comment the validation for $_POST['email'] field completely, then the validation for $_POST['confirm_email'] field is displaying correctly without any errors. If I enable it back, it is validating email field correctly, but when it reaches the point of validating confirm_email field, it is again showing me the error. I have also tried renaming success variable in check_ajax2.php page to other different names for both $_POST['email'] and $_POST['confirm_email'] but no success. I will be adding more fields in the form and validating within the check_ajax2.php page. So I am not planning on using different ajax pages for validating each of those fields (and I don't think it's smart to do it that way). I am not a jquery or AJAX guru, so all help in resolving this issue is highly appreciated. Thank you in advance.

  Read the article

• modalpopupextender.Show() wont fire

  - by Peter Lea

  I'm pretty new to developing for the web so bare with me. I have a company page with multiple locations and emails etc at each of these addresses. The idea is to have a single modalpopup to edit each type of data (one for email, one for urls, one for addresses etc). I link the modalpopupextender to a hiddenbutton and then call an edit function from various places where I can populate some hiddenfields and textboxes in the panel before showing it. The code executes but it just wont show the damn popup, I just see a flash and can't figure out if its my panel, my css or something I don't understand about ajax and postbacks etc. Things i've tried after reading various threads: Disable smart navigation in web.config Move ToolKitScriptManager up to master page and use proxy in content set hiddenbutton to use style="display:none" tried links etc instead of hidden button Heres my code CSS .modalBackground { position: absolute; z-index: 100; top: 0px; left: 0px; background-color: #000; filter: alpha(opacity=60); -moz-opacity: 0.6; opacity: 0.6; } .modalPopup { background-color: #FFD; border-width: 3px; border-style: solid; border-color: gray; padding: 3px;} Asp/html <ajaxToolkit:ModalPopupExtender runat="server" ID="mpe_email" BackgroundCssClass="modalBackground" PopupControlID="modal_email" CancelControlID="btn_cancel_email" TargetControlID="fake_btn_email" /> <asp:Button ID="fake_btn_email" runat="server" Text="email" style="display:none;" /> <asp:panel id="modal_email" runat="server" class="modalPopup" Width="500px" Height="500px"> <asp:HiddenField ID="hf_modal_email_location_id" runat="server" Value="" /> <asp:HiddenField ID="hf_modal_email_contact_id" runat="server" Value="" /> <asp:HiddenField ID="hf_modal_email_comms_id" runat="server" Value="" /> <table width="100%"> <tr> <td> <asp:Label ID="lbl_mpe_email_title" runat="server" Text="Edit Email Address" /> </td> </tr> <tr> <td> <table width="100%"> <tr> <td width="40px"><img src="../images/email.png" height="30px" width="30px"/></td> <td> <table width="100px"> <tr> <td><span>Quick Ref: <asp:TextBox ID="txb_mpe_email_qref" runat="server" Text="" /></span></td> </tr> <tr> <td><span>Email Address: <asp:TextBox ID="txb_mpe_email_address_full" runat="server" Text="" /></span></td> </tr> </table> </td> </tr> </table> </td> </tr> <tr> <td width="40px" align="left"><asp:Button ID="btn_cancel_email" runat="server" Text="Cancel"/></td> <td align="right"><asp:Button ID="btn_save_email" runat="server" Text="Save" OnCommand="save_modal_email" /></td> </tr> <tr> <td colspan="2" align="right"><asp:Label ID="lbl_mpe_email_err" runat="server" Text="" /></td> </tr> </table> c# public void oloc_ocon_email_edit(object sender, RepeaterCommandEventArgs e) { switch (e.CommandName) { case "edit": hf_modal_email_location_id.Value = ((HiddenField)e.Item.FindControl("hf_oloc_ocon_emails_location_id")).Value; hf_modal_email_contact_id.Value = ((HiddenField)e.Item.FindControl("hf_oloc_ocon_emails_contact_id")).Value; hf_modal_email_comms_id.Value = ((HiddenField)e.Item.FindControl("hf_oloc_ocon_emails_comms_id")).Value; lbl_mpe_email_title.Text = "Edit Email Address"; txb_mpe_email_qref.Text = ((HiddenField)e.Item.FindControl("hf_oloc_ocon_emails_qref")).Value; txb_mpe_email_address_full.Text = ((HiddenField)e.Item.FindControl("hf_oloc_ocon_emails_email_full")).Value; lbl_mpe_email_err.Text = ""; mpe_email.Show(); break; case "new": hf_modal_email_location_id.Value = ((HiddenField)e.Item.FindControl("hf_oloc_ocon_emails_location_id_p")).Value; hf_modal_email_contact_id.Value = ((HiddenField)e.Item.FindControl("hf_oloc_ocon_emails_contact_id_p")).Value; hf_modal_email_comms_id.Value = "0"; lbl_mpe_email_title.Text = "New Email Address"; txb_mpe_email_qref.Text = ""; txb_mpe_email_address_full.Text = ""; lbl_mpe_email_err.Text = ""; mpe_email.Show(); break; } } Stuff makes so much more sense in a desktop environment, I hope someone can point me in the right direction. Thanks

  Read the article

• Multiset of shared_ptrs as a dynamic priority queue: Concept and practice

  - by Sarah

  I was using a vector-based priority queue typedef std::priority_queue< Event, vector< Event >, std::greater< Event > > EventPQ; to manage my Event objects. Now my simulation has to be able to find and delete certain Event objects not at the top of the queue. I'd like to know if my planned work-around can do what I need it to, and if I have the syntax right. I'd also like to know if dramatically better solutions exist. My plan is to make EventPQ a multiset of smart pointers to Event objects: typedef std::multi_set< boost::shared_ptr< Event > > EventPQ; I'm borrowing functions of the Event class from a related post on a multimap priority queue. // Event.h #include <cstdlib> using namespace std; #include <set> #include <boost/shared_ptr.hpp> class Event; typedef std::multi_set< boost::shared_ptr< Event > > EventPQ; class Event { public: Event( double t, int eid, int hid ); ~Event(); void add( EventPQ& q ); void remove(); bool operator < ( const Event & rhs ) const { return ( time < rhs.time ); } bool operator > ( const Event & rhs ) const { return ( time > rhs.time ); } double time; int eventID; int hostID; EventPQ* mq; EventPQ::iterator mIt; }; // Event.cpp Event::Event( double t, int eid, int hid ) { time = t; eventID = eid; hostID = hid; } Event::~Event() {} void Event::add( EventPQ& q ) { mq = &q; mIt = q.insert( boost::shared_ptr<Event>(this) ); } void Event::remove() { mq.erase( mIt ); mq = 0; mIt = EventPQ::iterator(); } I was hoping that by making EventPQ a container of pointers, I could avoid wasting time copying Events into the container and avoid accidentally editing the wrong copy. Would it be dramatically easier to store the Events themselves in EventPQ instead? Does it make more sense to remove the time keys from Event objects and use them instead as keys in a multimap? Assuming the current implementation seems okay, my questions are: Do I need to specify how to sort on the pointers, rather than the objects, or does the multiset automatically know to sort on the objects pointed to? If I have a shared_ptr ptr1 to an Event that also has a pointer in the EventPQ container, how do I find and delete the corresponding pointer in EventPQ? Is it enough to .find( ptr1 ), or do I instead have to find by the key (time)? Is the Event::remove() sufficient for removing the pointer in the EventPQ container? There's a small chance multiple events could be created with the same time (obviously implied in the use of multiset). If the find() works on event times, to avoid accidentally deleting the wrong event, I was planning to throw in a further check on eventID and hostID. Does this seem reasonable? (Dumb syntax question) In Event.h, is the declaration of dummy class Event;, then the EventPQ typedef, and then the real class Event declaration appropriate? I'm obviously an inexperienced programmer with very spotty background--this isn't for homework. Would love suggestions and explanations. Please let me know if any part of this is confusing. Thanks.

  Read the article

• Accessing local variable doesn't improve performance

  - by NicMagnier

  The short version Why is this code: var index = (Math.floor(y / scale) * img.width + Math.floor(x / scale)) * 4; More performant than this one? var index = Math.floor(ref_index) * 4; The long version This week, the author of Impact js published an article about some rendering issue: http://www.phoboslab.org/log/2012/09/drawing-pixels-is-hard In the article there was the source of a function to scale an image by accessing pixels in the canvas. I wanted to suggest some traditional ways to optimize this kind of code so that the scaling would be shorter at loading time. But after testing it my result was most of the time worst that the original function. Guessing this was the JavaScript engine that was doing some smart optimization I tried to understand a bit more what was going on so I did a bunch of test. But my results are quite confusing and I would need some help to understand what's going on. I have a test page here: http://www.mx981.com/stuff/resize_bench/test.html jsPerf: http://jsperf.com/local-variable-due-to-the-scope-lookup To start the test, click the picture and the results will appear in the console. There are three different versions: The original code: for( var y = 0; y < heightScaled; y++ ) { for( var x = 0; x < widthScaled; x++ ) { var index = (Math.floor(y / scale) * img.width + Math.floor(x / scale)) * 4; var indexScaled = (y * widthScaled + x) * 4; scaledPixels.data[ indexScaled ] = origPixels.data[ index ]; scaledPixels.data[ indexScaled+1 ] = origPixels.data[ index+1 ]; scaledPixels.data[ indexScaled+2 ] = origPixels.data[ index+2 ]; scaledPixels.data[ indexScaled+3 ] = origPixels.data[ index+3 ]; } } jsPerf: http://jsperf.com/so-accessing-local-variable-doesn-t-improve-performance One of my attempt to optimize it: var ref_index = 0; var ref_indexScaled = 0 var ref_step = 1 / scale; for( var y = 0; y < heightScaled; y++ ) { for( var x = 0; x < widthScaled; x++ ) { var index = Math.floor(ref_index) * 4; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index ]; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index+1 ]; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index+2 ]; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index+3 ]; ref_index+= ref_step; } } jsPerf: http://jsperf.com/so-accessing-local-variable-doesn-t-improve-performance The same optimized code but with recalculating the index variable each time (Hybrid) var ref_index = 0; var ref_indexScaled = 0 var ref_step = 1 / scale; for( var y = 0; y < heightScaled; y++ ) { for( var x = 0; x < widthScaled; x++ ) { var index = (Math.floor(y / scale) * img.width + Math.floor(x / scale)) * 4; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index ]; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index+1 ]; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index+2 ]; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index+3 ]; ref_index+= ref_step; } } jsPerf: http://jsperf.com/so-accessing-local-variable-doesn-t-improve-performance The only difference in the two last one is the calculation of the 'index' variable. And to my surprise the optimized version is slower in most browsers (except opera). Results of personal testing (not the jsPerf tests): Opera Original: 8668ms Optimized: 932ms Hybrid: 8696ms Chrome Original: 139ms Optimized: 145ms Hybrid: 136ms Safari Original: 433ms Optimized: 853ms Hybrid: 451ms Firefox Original: 343ms Optimized: 422ms Hybrid: 350ms After digging around, it seems an usual good practice is to access mainly local variable due to the scope lookup. Because The optimized version only call one local variable it should be faster that the Hybrid code which call multiple variable and object in addition to the various operation involved. So why the "optimized" version is slower? I thought that it might be because some JavaScript engine don't optimize the Optimized version because it is not hot enough but after using --trace-opt in chrome, it seems all version are properly compiled by V8. At this point I am a bit clueless and wonder if somebody would know what is going on? I did also some more test cases in this page: http://www.mx981.com/stuff/resize_bench/index.html

  Read the article

• Adding Unobtrusive Validation To MVCContrib Fluent Html

  - by srkirkland

  ASP.NET MVC 3 includes a new unobtrusive validation strategy that utilizes HTML5 data-* attributes to decorate form elements.  Using a combination of jQuery validation and an unobtrusive validation adapter script that comes with MVC 3, those attributes are then turned into client side validation rules. A Quick Introduction to Unobtrusive Validation To quickly show how this works in practice, assume you have the following Order.cs class (think Northwind) [If you are familiar with unobtrusive validation in MVC 3 you can skip to the next section]: public class Order : DomainObject { [DataType(DataType.Date)] public virtual DateTime OrderDate { get; set; }   [Required] [StringLength(12)] public virtual string ShipAddress { get; set; }   [Required] public virtual Customer OrderedBy { get; set; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Note the System.ComponentModel.DataAnnotations attributes, which provide the validation and metadata information used by ASP.NET MVC 3 to determine how to render out these properties.  Now let’s assume we have a form which can edit this Order class, specifically let’s look at the ShipAddress property: @Html.LabelFor(x => x.Order.ShipAddress) @Html.EditorFor(x => x.Order.ShipAddress) @Html.ValidationMessageFor(x => x.Order.ShipAddress) .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now the Html.EditorFor() method is smart enough to look at the ShipAddress attributes and write out the necessary unobtrusive validation html attributes.  Note we could have used Html.TextBoxFor() or even Html.TextBox() and still retained the same results. If we view source on the input box generated by the Html.EditorFor() call, we get the following: <input type="text" value="Rua do Paço, 67" name="Order.ShipAddress" id="Order_ShipAddress" data-val-required="The ShipAddress field is required." data-val-length-max="12" data-val-length="The field ShipAddress must be a string with a maximum length of 12." data-val="true" class="text-box single-line input-validation-error"> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } As you can see, we have data-val-* attributes for both required and length, along with the proper error messages and additional data as necessary (in this case, we have the length-max=”12”). And of course, if we try to submit the form with an invalid value, we get an error on the client: Working with MvcContrib’s Fluent Html The MvcContrib project offers a fluent interface for creating Html elements which I find very expressive and useful, especially when it comes to creating select lists.  Let’s look at a few quick examples: @this.TextBox(x => x.FirstName).Class("required").Label("First Name:") @this.MultiSelect(x => x.UserId).Options(ViewModel.Users) @this.CheckBox("enabled").LabelAfter("Enabled").Title("Click to enable.").Styles(vertical_align => "middle")   @(this.Select("Order.OrderedBy").Options(Model.Customers, x => x.Id, x => x.CompanyName) .Selected(Model.Order.OrderedBy != null ? Model.Order.OrderedBy.Id : "") .FirstOption(null, "--Select A Company--") .HideFirstOptionWhen(Model.Order.OrderedBy != null) .Label("Ordered By:")) .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } These fluent html helpers create the normal html you would expect, and I think they make life a lot easier and more readable when dealing with complex markup or select list data models (look ma: no anonymous objects for creating class names!). Of course, the problem we have now is that MvcContrib’s fluent html helpers don’t know about ASP.NET MVC 3’s unobtrusive validation attributes and thus don’t take part in client validation on your page.  This is not ideal, so I wrote a quick helper method to extend fluent html with the knowledge of what unobtrusive validation attributes to include when they are rendered. Extending MvcContrib’s Fluent Html Before posting the code, there are just a few things you need to know.  The first is that all Fluent Html elements implement the IElement interface (MvcContrib.FluentHtml.Elements.IElement), and the second is that the base System.Web.Mvc.HtmlHelper has been extended with a method called GetUnobtrusiveValidationAttributes which we can use to determine the necessary attributes to include.  With this knowledge we can make quick work of extending fluent html: public static class FluentHtmlExtensions { public static T IncludeUnobtrusiveValidationAttributes<T>(this T element, HtmlHelper htmlHelper) where T : MvcContrib.FluentHtml.Elements.IElement { IDictionary<string, object> validationAttributes = htmlHelper .GetUnobtrusiveValidationAttributes(element.GetAttr("name"));   foreach (var validationAttribute in validationAttributes) { element.SetAttr(validationAttribute.Key, validationAttribute.Value); }   return element; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The code is pretty straight forward – basically we use a passed HtmlHelper to get a list of validation attributes for the current element and then add each of the returned attributes to the element to be rendered. The Extension In Action Now let’s get back to the earlier ShipAddress example and see what we’ve accomplished.  First we will use a fluent html helper to render out the ship address text input (this is the ‘before’ case): @this.TextBox("Order.ShipAddress").Label("Ship Address:").Class("class-name") .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } And the resulting HTML: <label id="Order_ShipAddress_Label" for="Order_ShipAddress">Ship Address:</label> <input type="text" value="Rua do Paço, 67" name="Order.ShipAddress" id="Order_ShipAddress" class="class-name"> Now let’s do the same thing except here we’ll use the newly written extension method: @this.TextBox("Order.ShipAddress").Label("Ship Address:") .Class("class-name").IncludeUnobtrusiveValidationAttributes(Html) .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } And the resulting HTML: <label id="Order_ShipAddress_Label" for="Order_ShipAddress">Ship Address:</label> <input type="text" value="Rua do Paço, 67" name="Order.ShipAddress" id="Order_ShipAddress" data-val-required="The ShipAddress field is required." data-val-length-max="12" data-val-length="The field ShipAddress must be a string with a maximum length of 12." data-val="true" class="class-name"> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Excellent!  Now we can continue to use unobtrusive validation and have the flexibility to use ASP.NET MVC’s Html helpers or MvcContrib’s fluent html helpers interchangeably, and every element will participate in client side validation. Wrap Up Overall I’m happy with this solution, although in the best case scenario MvcContrib would know about unobtrusive validation attributes and include them automatically (of course if it is enabled in the web.config file).  I know that MvcContrib allows you to author global behaviors, but that requires changing the base class of your views, which I am not willing to do. Enjoy!

  Read the article

• Built-in GZip/Deflate Compression on IIS 7.x

  - by Rick Strahl

  IIS 7 improves internal compression functionality dramatically making it much easier than previous versions to take advantage of compression that’s built-in to the Web server. IIS 7 also supports dynamic compression which allows automatic compression of content created in your own applications (ASP.NET or otherwise!). The scheme is based on content-type sniffing and so it works with any kind of Web application framework. While static compression on IIS 7 is super easy to set up and turned on by default for most text content (text/*, which includes HTML and CSS, as well as for JavaScript, Atom, XAML, XML), setting up dynamic compression is a bit more involved, mostly because the various default compression settings are set in multiple places down the IIS –> ASP.NET hierarchy. Let’s take a look at each of the two approaches available: Static Compression Compresses static content from the hard disk. IIS can cache this content by compressing the file once and storing the compressed file on disk and serving the compressed alias whenever static content is requested and it hasn’t changed. The overhead for this is minimal and should be aggressively enabled. Dynamic Compression Works against application generated output from applications like your ASP.NET apps. Unlike static content, dynamic content must be compressed every time a page that requests it regenerates its content. As such dynamic compression has a much bigger impact than static caching. How Compression is configured Compression in IIS 7.x  is configured with two .config file elements in the <system.WebServer> space. The elements can be set anywhere in the IIS/ASP.NET configuration pipeline all the way from ApplicationHost.config down to the local web.config file. The following is from the the default setting in ApplicationHost.config (in the %windir%\System32\inetsrv\config forlder) on IIS 7.5 with a couple of small adjustments (added json output and enabled dynamic compression): <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <httpCompression directory="%SystemDrive%\inetpub\temp\IIS Temporary Compressed Files"> <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" staticCompressionLevel="9" /> <dynamicTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/json" enabled="true" /> <add mimeType="*/*" enabled="false" /> </dynamicTypes> <staticTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/atom+xml" enabled="true" /> <add mimeType="application/xaml+xml" enabled="true" /> <add mimeType="*/*" enabled="false" /> </staticTypes> </httpCompression> <urlCompression doStaticCompression="true" doDynamicCompression="true" /> </system.webServer> </configuration> You can find documentation on the httpCompression and urlCompression keys here respectively: http://msdn.microsoft.com/en-us/library/ms690689%28v=vs.90%29.aspx http://msdn.microsoft.com/en-us/library/aa347437%28v=vs.90%29.aspx The httpCompression Element – What and How to compress Basically httpCompression configures what types to compress and how to compress them. It specifies the DLL that handles gzip encoding and the types of documents that are to be compressed. Types are set up based on mime-types which looks at returned Content-Type headers in HTTP responses. For example, I added the application/json to mime type to my dynamic compression types above to allow that content to be compressed as well since I have quite a bit of AJAX content that gets sent to the client. The UrlCompression Element – Enables and Disables Compression The urlCompression element is a quick way to turn compression on and off. By default static compression is enabled server wide, and dynamic compression is disabled server wide. This might be a bit confusing because the httpCompression element also has a doDynamicCompression attribute which is set to true by default, but the urlCompression attribute by the same name actually overrides it. The urlCompression element only has three attributes: doStaticCompression, doDynamicCompression and dynamicCompressionBeforeCache. The doCompression attributes are the final determining factor whether compression is enabled, so it’s a good idea to be explcit! The default for doDynamicCompression='false”, but doStaticCompression="true"! Static Compression is enabled by Default, Dynamic Compression is not Because static compression is very efficient in IIS 7 it’s enabled by default server wide and there probably is no reason to ever change that setting. Dynamic compression however, since it’s more resource intensive, is turned off by default. If you want to enable dynamic compression there are a few quirks you have to deal with, namely that enabling it in ApplicationHost.config doesn’t work. Setting: <urlCompression doDynamicCompression="true" /> in applicationhost.config appears to have no effect and I had to move this element into my local web.config to make dynamic compression work. This is actually a smart choice because you’re not likely to want dynamic compression in every application on a server. Rather dynamic compression should be applied selectively where it makes sense. However, nowhere is it documented that the setting in applicationhost.config doesn’t work (or more likely is overridden somewhere and disabled lower in the configuration hierarchy). So: remember to set doDynamicCompression=”true” in web.config!!! How Static Compression works Static compression works against static content loaded from files on disk. Because this content is static and not bound to change frequently – such as .js, .css and static HTML content – it’s fairly easy for IIS to compress and then cache the compressed content. The way this works is that IIS compresses the files into a special folder on the server’s hard disk and then reads the content from this location if already compressed content is requested and the underlying file resource has not changed. The semantics of serving an already compressed file are very efficient – IIS still checks for file changes, but otherwise just serves the already compressed file from the compression folder. The compression folder is located at: %windir%\inetpub\temp\IIS Temporary Compressed Files\ApplicationPool\ If you look into the subfolders you’ll find compressed files: These files are pre-compressed and IIS serves them directly to the client until the underlying files are changed. As I mentioned before – static compression is on by default and there’s very little reason to turn that functionality off as it is efficient and just works out of the box. The one tweak you might want to do is to set the compression level to maximum. Since IIS only compresses content very infrequently it would make sense to apply maximum compression. You can do this with the staticCompressionLevel setting on the scheme element: <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" staticCompressionLevel="9" /> Other than that the default settings are probably just fine. Dynamic Compression – not so fast! By default dynamic compression is disabled and that’s actually quite sensible – you should use dynamic compression very carefully and think about what content you want to compress. In most applications it wouldn’t make sense to compress *all* generated content as it would generate a significant amount of overhead. Scott Fortsyth has a great post that details some of the performance numbers and how much impact dynamic compression has. Depending on how busy your server is you can play around with compression and see what impact it has on your server’s performance. There are also a few settings you can tweak to minimize the overhead of dynamic compression. Specifically the httpCompression key has a couple of CPU related keys that can help minimize the impact of Dynamic Compression on a busy server: dynamicCompressionDisableCpuUsage dynamicCompressionEnableCpuUsage By default these are set to 90 and 50 which means that when the CPU hits 90% compression will be disabled until CPU utilization drops back down to 50%. Again this is actually quite sensible as it utilizes CPU power from compression when available and falling off when the threshold has been hit. It’s a good way some of that extra CPU power on your big servers to use when utilization is low. Again these settings are something you likely have to play with. I would probably set the upper limit a little lower than 90% maybe around 70% to make this a feature that kicks in only if there’s lots of power to spare. I’m not really sure how accurate these CPU readings that IIS uses are as Cpu usage on Web Servers can spike drastically even during low loads. Don’t trust settings – do some load testing or monitor your server in a live environment to see what values make sense for your environment. Finally for dynamic compression I tend to add one Mime type for JSON data, since a lot of my applications send large chunks of JSON data over the wire. You can do that with the application/json content type: <add mimeType="application/json" enabled="true" /> What about Deflate Compression? The default compression is GZip. The documentation hints that you can use a different compression scheme and mentions Deflate compression. And sure enough you can change the compression settings to: <scheme name="deflate" dll="%Windir%\system32\inetsrv\gzip.dll" staticCompressionLevel="9" /> to get deflate style compression. The deflate algorithm produces slightly more compact output so I tend to prefer it over GZip but more HTTP clients (other than browsers) support GZip than Deflate so be careful with this option if you build Web APIs. I also had some issues with the above value actually being applied right away. Changing the scheme in applicationhost.config didn’t show up on the site  right away. It required me to do a full IISReset to get that change to show up before I saw the change over to deflate compressed content. Content was slightly more compressed with deflate – not sure if it’s worth the slightly less common compression type, but the option at least is available. IIS 7 finally makes GZip Easy In summary IIS 7 makes GZip easy finally, even if the configuration settings are a bit obtuse and the documentation is seriously lacking. But once you know the basic settings I’ve described here and the fact that you can override all of this in your local web.config it’s pretty straight forward to configure GZip support and tweak it exactly to your needs. Static compression is a total no brainer as it adds very little overhead compared to direct static file serving and provides solid compression. Dynamic Compression is a little more tricky as it does add some overhead to servers, so it probably will require some tweaking to get the right balance of CPU load vs. compression ratios. Looking at large sites like Amazon, Yahoo, NewEgg etc. – they all use Related Content Code based ASP.NET GZip Caveats HttpWebRequest and GZip Responses © Rick Strahl, West Wind Technologies, 2005-2011Posted in IIS7   ASP.NET  

  Read the article

• CodePlex Daily Summary for Monday, December 06, 2010

  CodePlex Daily Summary for Monday, December 06, 2010Popular ReleasesAura: Aura Preview 1: Rewritten from scratch. This release supports getting color only from icon of foreground window.myCollections: Version 1.2: New in version 1.2: Big performance improvement. New Design (Added Outlook style View, New detail view, New Groub By...) Added Sort by Media Added Manage Movie Studio Zoom preference is now saved. Media name are now editable. Added Portuguese version You can now Hide details panel Add support for FLAC tags You can now imports books from BibTex Xml file BugFixingmytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.49.0 beta: mytrip.mvc 1.0.49.0 beta web Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) mytrip.mvc 1.0.49.0 beta src System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net 6.3.4, MVC3 RC WARNING For run and debug mytrip.mvc 1.0.49.0 beta src download and ...Menu and Context Menu for Silverlight 4.0: Silverlight Menu and Context Menu v2.3 Beta: - Added keyboard navigation support with access keys - Shortcuts like Ctrl-Alt-A are now supported(where the browser permits it) - The PopupMenuSeparator is now completely based on the PopupMenuItem class - Moved item manipulation code to a partial class in PopupMenuItemsControl.cs - Moved menu management and keyboard navigation code to the new PopupMenuManager class - Simplified the layout by removing the RootGrid element(all content is now placed in OverlayCanvas and is accessed by the new ...SubtitleTools: SubtitleTools 1.0: First public releaseMiniTwitter: 1.62: MiniTwitter 1.62 ???? ?? ??????????????????????????????????????? 140 ?????????????????????????? ???????????????????????????????? ?? ??????????????????????????????????Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (December 2010): The release is targetted for stable daily use. With improved performance and enhanced compatibility with several latest PHP open source applications; it makes this release perfect replacement of your old PHP runtime. Changes made within this release include following and much more: Performance improvements based on real-world applications experience. We determined biggest bottlenecks and we found and removed overheads causing performance problems in many PHP applications. Reimplemented nat...Chronos WPF: Chronos v2.0 Beta 3: Release notes: Updated introduction document. Updated Visual Studio 2010 Extension (vsix) package. Added horizontal scrolling to the main window TaskBar. Added new styles for ListView, ListViewItem, GridViewColumnHeader, ... Added a new WindowViewModel class (allowing to fetch data). Added a new Navigate method (with several overloads) to the NavigationViewModel class (protected). Reimplemented Task usage for the WorkspaceViewModel.OnDelete method. Removed the reflection effect...MDownloader: MDownloader-0.15.26.7024: Fixed updater; Fixed MegauploadDJ - jQuery WebControls for ASP.NET: DJ 1.2: What is new? Update to support jQuery 1.4.2 Update to support jQuery ui 1.8.6 Update to Visual Studio 2010 New WebControls with samples added Autocomplete WebControl Button WebControl ToggleButt WebControl The example web site is including in source code project.LateBindingApi.Excel: LateBindingApi.Excel Release 0.7g: Unterschiede zur Vorgängerversion: - Zusätzliche Interior Properties - Group / Ungroup Methoden für Range - Bugfix COM Reference Handling für Application Objekt in einigen Klassen Release+Samples V0.7g: - Enthält Laufzeit DLL und Beispielprojekte Beispielprojekte: COMAddinExample - Demonstriert ein versionslos angebundenes COMAddin Example01 - Background Colors und Borders für Cells Example02 - Font Attributes undAlignment für Cells Example03 - Numberformats Example04 - Shapes, WordArts, P...ESRI ArcGIS Silverlight Toolkit: November 2010 - v2.1: ESRI ArcGIS Silverlight Toolkit v2.1 Added Windows Phone 7 build. New controls added: InfoWindow ChildPage (Windows Phone 7 only) See what's new here full details for : http://help.arcgis.com/en/webapi/silverlight/help/#/What_s_new_in_2_1/016600000025000000/ Note: Requires Visual Studio 2010, .NET 4.0 and Silverlight 4.0.ASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.1: Atomic CMS 2.1.1 release notes Atomic CMS installation guide Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.5 beta Released: Hi, Today we are releasing Visifire 3.6.5 beta with the following new feature: New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. Also this release includes few bug fixes: AxisXLabel label were getting clipped if angle was set for AxisLabels and ScrollingEnabled was not set in Chart. If LabelStyle property was set as 'Inside', size of the Pie was not proper. Yo...EnhSim: EnhSim 2.1.1: 2.1.1This release adds in the changes for 4.03a. To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Switched Searing Flames bac...AI: Initial 0.0.1: It’s simply just one code file; it simulates AI and machine in a simulated world. The AI has a little understanding of its body machine and parts, and able to use its feet to do actions just start and stop walking. The world is all of white with nothing but just the machine on a white planet. Colors, odors and position information make no sense. I’m previous C# programmer and I’m learning F# during this project, although I’m still not a good F# programmer, in this project I learning to prog...NKinect: NKinect Preview: Build features: Accelerometer reading Motor serial number property Realtime image update Realtime depth calculation Export to PLY (On demand) Control motor LED Control Kinect tiltMicrosoft - Domain Oriented N-Layered .NET 4.0 App Sample (Microsoft Spain): V1.0 - N-Layer DDD Sample App .NET 4.0: Required Software (Microsoft Base Software needed for Development environment) Visual Studio 2010 RTM & .NET 4.0 RTM (Final Versions) Expression Blend 4 SQL Server 2008 R2 Express/Standard/Enterprise Unity Application Block 2.0 - Published May 5th 2010 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2D24F179-E0A6-49D7-89C4-5B67D939F91B&displaylang=en http://unity.codeplex.com/releases/view/31277 PEX & MOLES 0.94.51023.0, 29/Oct/2010 - Visual Studio 2010 Power Tools http://re...Sense/Net Enterprise Portal & ECMS: SenseNet 6.0.1 Community Edition: Sense/Net 6.0.1 Community Edition This half year we have been working quite fiercely to bring you the long-awaited release of Sense/Net 6.0. Download this Community Edition to see what we have been up to. These months we have worked on getting the WebCMS capabilities of Sense/Net 6.0 up to par. New features include: New, powerful page and portlet editing experience. HTML and CSS cleanup, new, powerful site skinning system. Upgraded, lightning-fast indexing and query via Lucene. Limita...Minecraft GPS: Minecraft GPS 1.1.1: New Features Compass! New style. Set opacity on main window to allow overlay of Minecraft. Open World in any folder. Fixes Fixed style so listbox won't grow the window size. Fixed open file dialog issue on non-vista kernel machines.New ProjectsAboutTime: The AboutTime WPF controls project is aimed at developing custom controls that relate to time.aReader: aReader is a free software, it's used as an XPS document reader. It's developed in C# Language and use Windows Presentation Foundation technology with .NET Framework 3.5. Mixed with Ribbon Controls Library for GUI (Graphic User Interface) make this application user friendly.Battle Net Info: Battle Net Info provides information of the StarCraft2 player from his profile pageBencoder: Library for encode/decode bencode file or string. It's developing on C#.BiBongNet: BiBongNet Project.Binhnt: BinhntC++ Bloom Filter Library: C++ Bloom Filter LibraryChild Sponsorship Manager: Sponsorship Manager is developed for a NPO that provides child sponsorship in developing countries. It is possible to track sponsor child relations, gifts and payments. It is developed in visual basic . netDocBlogger: This is a tool for automatically converting existing XML comments from your project into MSDN style HTML for posting to the codeplex site. This will use the MetaBlog API to post code, but can be used in a copy paste fashion right away.Dynamic Rdlc WebControl: "Dynamic Rdlc WebControl" is an ASP .NET WebControl to generate dynamic reports in RDLC format without generate physical files. Suports groups and totalizers. It is developed with Microsoft Visual Studio 2010, ASP .NET and C# 4.Fake Call for Windows Phone 7: Coding4Fun Windows Phone 7 fake call applicationFlow launcher: Flow is the worlds fastest application launcher, using an onscreen keyboard and mnemonics to achieve lightning fast shortcut launching.GaDotNet: GaDotNet is an open source library designed to make it easy to log page views, events and transactions, through c# code, without using JavaScript or even needing to have a browser.HackerNews for WP7: HackerNews is a WP7 client for the HackerNews website.How much is this meeting costing us?: Coding4Fun Windows Phone 7 "How much is this meeting costing us?" applicationKLAB: KLABMap Navigator: Map Navigator - it's a silverlight application intended to work with maps.MNRT: MNRT implements (demonstrates) several techniques to realize fast global illumination for dynamic scenes on Graphics Processing Units (GPUs) using CUDA. A GPU-based kd-tree was implemented to accelerate both ray tracing and photon mapping.MVC Helpers: MVC Helper makes developing views easier. It contains extended helpers classes to render view content. It is developed in C#.Net Extended Helpers for Grid has been created so far. MVCPets: This is a projected dedicated to providing a free platform to be used by animal rescue organizations. The hope is that this project can fill the void for those rescue groups that can't afford to pay a professional web designer/developer.MyGraphicProgram: ???????????????NAI: This project is a step by step illustration of some Numerical Analysis methods.Nemono: Nemono is an application that runs in the background, and is activated by pressing a key combination like ALT+W. When activated, Nemono uses context awareness to present relevant shortcuts to the user, and mnemonics to execute shortcuts.opojo: opojoOxyPlot: OxyPlot is a .NET library for making XY line plots. The focus is on simplicity and performance. The library contains custom controls for WPF and Windows Forms. The plots can also be exported to SVG, PDF and PNG.PowerChumby: PowerChumby is a Perl CGI script and a PowerShell module that gives you a PowerShell way of controlling your Chumby.RHoK Berlin Visio Projekt: Random Hacks of Kindness - Berlin Projekt für die Senatsverwaltung für Gesundheit, Umwelt und Verbraucherschutz Query, integrate and display external data in Microsoft Visio. It's developed in C#.sc2md: starcraft.md news portalSlide Show: Coding4Fun Windows Phone 7 Slide Show applicationsmartcon: smart control centerTFS Fav source: Favourites for source location in VSTwitter Followers Monitor: Free and Open Source tool that will let you monitor any Twitter account for its new & lost followers even if it's not yours and you don't have its credentials. It allows you to add several Twitter accounts and be updated right from your desktop.

  Read the article

• 10 Essential Tools for building ASP.NET Websites

  - by Stephen Walther

  I recently put together a simple public website created with ASP.NET for my company at Superexpert.com. I was surprised by the number of free tools that I ended up using to put together the website. Therefore, I thought it would be interesting to create a list of essential tools for building ASP.NET websites. These tools work equally well with both ASP.NET Web Forms and ASP.NET MVC. Performance Tools After reading Steve Souders two (very excellent) books on front-end website performance High Performance Web Sites and Even Faster Web Sites, I have been super sensitive to front-end website performance. According to Souders’ Performance Golden Rule: “Optimize front-end performance first, that's where 80% or more of the end-user response time is spent” You can use the tools below to reduce the size of the images, JavaScript files, and CSS files used by an ASP.NET application. 1. Sprite and Image Optimization Framework CSS sprites were first described in an article written for A List Apart entitled CSS sprites: Image Slicing’s Kiss of Death. When you use sprites, you combine multiple images used by a website into a single image. Next, you use CSS trickery to display particular sub-images from the combined image in a webpage. The primary advantage of sprites is that they reduce the number of requests required to display a webpage. Requesting a single large image is faster than requesting multiple small images. In general, the more resources – images, JavaScript files, CSS files – that must be moved across the wire, the slower your website. However, most people avoid using sprites because they require a lot of work. You need to combine all of the images and write just the right CSS rules to display the sub-images. The Microsoft Sprite and Image Optimization Framework enables you to avoid all of this work. The framework combines the images for you automatically. Furthermore, the framework includes an ASP.NET Web Forms control and an ASP.NET MVC helper that makes it easy to display the sub-images. You can download the Sprite and Image Optimization Framework from CodePlex at http://aspnet.codeplex.com/releases/view/50869. The Sprite and Image Optimization Framework was written by Morgan McClean who worked in the office next to mine at Microsoft. Morgan was a scary smart Intern from Canada and we discussed the Framework while he was building it (I was really excited to learn that he was working on it). Morgan added some great advanced features to this framework. For example, the Sprite and Image Optimization Framework supports something called image inlining. When you use image inlining, the actual image is stored in the CSS file. Here’s an example of what image inlining looks like: .Home_StephenWalther_small-jpg { width:75px; height:100px; background: url(data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAEsAAABkCAIAAABB1lpeAAAAB GdBTUEAALGOfPtRkwAAACBjSFJNAACHDwAAjA8AAP1SAACBQAAAfXkAAOmLAAA85QAAGcxzPIV3AAAKL s+zNfREAAAAASUVORK5CYII=) no-repeat 0% 0%; } The actual image (in this case a picture of me that is displayed on the home page of the Superexpert.com website) is stored in the CSS file. If you visit the Superexpert.com website then very few separate images are downloaded. For example, all of the images with a red border in the screenshot below take advantage of CSS sprites: Unfortunately, there are some significant Gotchas that you need to be aware of when using the Sprite and Image Optimization Framework. There are workarounds for these Gotchas. I plan to write about these Gotchas and workarounds in a future blog entry. 2. Microsoft Ajax Minifier Whenever possible you should combine, minify, compress, and cache with a far future header all of your JavaScript and CSS files. The Microsoft Ajax Minifier makes it easy to minify JavaScript and CSS files. Don’t confuse minification and compression. You need to do both. According to Souders, you can reduce the size of a JavaScript file by an additional 20% (on average) by minifying a JavaScript file after you compress the file. When you minify a JavaScript or CSS file, you use various tricks to reduce the size of the file before you compress the file. For example, you can minify a JavaScript file by replacing long JavaScript variables names with short variables names and removing unnecessary white space and comments. You can minify a CSS file by doing such things as replacing long color names such as #ffffff with shorter equivalents such as #fff. The Microsoft Ajax Minifier was created by Microsoft employee Ron Logan. Internally, this tool was being used by several large Microsoft websites. We also used the tool heavily on the ASP.NET team. I convinced Ron to publish the tool on CodePlex so that everyone in the world could take advantage of it. You can download the tool from the ASP.NET Ajax website and read documentation for the tool here. I created the installer for the Microsoft Ajax Minifier. When creating the installer, I also created a Visual Studio build task to make it easy to minify all of your JavaScript and CSS files whenever you do a build within Visual Studio automatically. Read the Ajax Minifier Quick Start to learn how to configure the build task. 3. ySlow The ySlow tool is a free add-on for Firefox created by Yahoo that enables you to test the front-end of your website. For example, here are the current test results for the Superexpert.com website: The Superexpert.com website has an overall score of B (not perfect but not bad). The ySlow tool is not perfect. For example, the Superexpert.com website received a failing grade of F for not using a Content Delivery Network even though the website using the Microsoft Ajax Content Delivery Network for JavaScript files such as jQuery. Uptime After publishing a website live to the world, you want to ensure that the website does not encounter any issues and that it stays live. I use the following tools to monitor the Superexpert.com website now that it is live. 4. ELMAH ELMAH stands for Error Logging Modules and Handlers for ASP.NET. ELMAH enables you to record any errors that happen at your website so you can review them in the future. You can download ELMAH for free from the ELMAH project website. ELMAH works great with both ASP.NET Web Forms and ASP.NET MVC. You can configure ELMAH to store errors in a number of different stores including XML files, the Event Log, an Access database, a SQL database, an Oracle database, or in computer RAM. You also can configure ELMAH to email error messages to you when they happen. By default, you can access ELMAH by requesting the elmah.axd page from a website with ELMAH installed. Here’s what the elmah page looks like from the Superexpert.com website (this page is password-protected because secret information can be revealed in an error message): If you click on a particular error message, you can view the original Yellow Screen ASP.NET error message (even when the error message was never displayed to the actual user). I installed ELMAH by taking advantage of the new package manager for ASP.NET named NuGet (originally named NuPack). You can read the details about NuGet in the following blog entry by Scott Guthrie. You can download NuGet from CodePlex. 5. Pingdom I use Pingdom to verify that the Superexpert.com website is always up. You can sign up for Pingdom by visiting Pingdom.com. You can use Pingdom to monitor a single website for free. At the Pingdom website, you configure the frequency that your website gets pinged. I verify that the Superexpert.com website is up every 5 minutes. I have the Pingdom service verify that it can retrieve the string “Contact Us” from the website homepage. If your website goes down, you can configure Pingdom so that it sends an email, Twitter, SMS, or iPhone alert. I use the Pingdom iPhone app which looks like this: 6. Host Tracker If your website does go down then you need some way of determining whether it is a problem with your local network or if your website is down for everyone. I use a website named Host-Tracker.com to check how badly a website is down. Here’s what the Host-Tracker website displays for the Superexpert.com website when the website can be successfully pinged from everywhere in the world: Notice that Host-Tracker pinged the Superexpert.com website from 68 locations including Roubaix, France and Scranton, PA. Debugging I mean debugging in the broadest possible sense. I use the following tools when building a website to verify that I have not made a mistake. 7. HTML Spell Checker Why doesn’t Visual Studio have a built-in spell checker? Don’t know – I’ve always found this mysterious. Fortunately, however, a former member of the ASP.NET team wrote a free spell checker that you can use with your ASP.NET pages. I find a spell checker indispensible. It is easy to delude yourself that you are capable of perfect spelling. I’m always super embarrassed when I actually run the spell checking tool and discover all of my spelling mistakes. The fastest way to add the HTML Spell Checker extension to Visual Studio is to select the menu option Tools, Extension Manager within Visual Studio. Click on Online Gallery and search for HTML Spell Checker: 8. IIS SEO Toolkit If people cannot find your website through Google then you should not even bother to create it. Microsoft has a great extension for IIS named the IIS Search Engine Optimization Toolkit that you can use to identify issue with your website that would hurt its page rank. You also can use this tool to quickly create a sitemap for your website that you can submit to Google or Bing. You can even generate the sitemap for an ASP.NET MVC website. Here’s what the report overview for the Superexpert.com website looks like: Notice that the Sueprexpert.com website had plenty of violations. For example, there are 65 cases in which a page has a broken hyperlink. You can drill into these violations to identity the exact page and location where these violations occur. 9. LinqPad If your ASP.NET website accesses a database then you should be using LINQ to Entities with the Entity Framework. Using LINQ involves some magic. LINQ queries written in C# get converted into SQL queries for you. If you are not careful about how you write your LINQ queries, you could unintentionally build a really badly performing website. LinqPad is a free tool that enables you to experiment with your LINQ queries. It even works with Microsoft SQL CE 4 and Azure. You can use LinqPad to execute a LINQ to Entities query and see the results. You also can use it to see the resulting SQL that gets executed against the database: 10. .NET Reflector I use .NET Reflector daily. The .NET Reflector tool enables you to take any assembly and disassemble the assembly into C# or VB.NET code. You can use .NET Reflector to see the “Source Code” of an assembly even when you do not have the actual source code. You can download a free version of .NET Reflector from the Redgate website. I use .NET Reflector primarily to help me understand what code is doing internally. For example, I used .NET Reflector with the Sprite and Image Optimization Framework to better understand how the MVC Image helper works. Here’s part of the disassembled code from the Image helper class: Summary In this blog entry, I’ve discussed several of the tools that I used to create the Superexpert.com website. These are tools that I use to improve the performance, improve the SEO, verify the uptime, or debug the Superexpert.com website. All of the tools discussed in this blog entry are free. Furthermore, all of these tools work with both ASP.NET Web Forms and ASP.NET MVC. Let me know if there are any tools that you use daily when building ASP.NET websites.

  Read the article

• CodePlex Daily Summary for Friday, April 02, 2010

  CodePlex Daily Summary for Friday, April 02, 2010New ProjectsAE.Remoting: An alternative means of remoting for .NET to allow for intuitive usage and easy implementation into existing code.animated-smoke-modeling: This is an implementation or a demo of our method to model animated smokes. ASP.NET Google Maps: Extensible and easy to use, this is ASP.NET Google Maps Control. Drag & Drop and is ready to go. You can configure map style, add a PushPin using t...CartPatches able to see: CartPatches able to see youCodemix Cms: Codemix CmsDo the right thing - The Simple TodoManager: A simple Todo Manager which lets you focus on your daily most important tasks/todos. So do the right thing.....at your home, in your office, in you...Fast Console: Fast Console is a simple xml programming language. This may be a really good starting language as there are printing, variables and as soon as poss...Graphing Calculator in Silverlight: This was initially an effort to port a WPF graphing calculator written by Bob Brown (Microsoft) into Silverlight but soon after it became necessary...InformationVSTS: This application allows you to have all informations on VSTS installed. It also lets you know the server of BUILD and project.La Ranisima: La Ranisima is an open source "Space Invaders" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses keyboard. This cross-platfo...La villa del seis: La villa del seis is a multiplatform point-and-click graphical adventure. Also, you can play it like a text adventure (interactive fiction) on a te...LParse: LParse is a monadic parser combinator library, similar to Haskell’s Parsec. It allows you create parsers on C# language. All parsers are first-clas...Manage Recents File/Project VS2005/2008: Clear Recents Files and Projects, and Clear Broken Links of Recents Files and Projects for VS2005 and VS2008. Developed in Visual Studio 2008 SP...Mavention: Mavention makes SharePoint work for you.MixMail: MixMailMixScrum: mixScrumMixTemplate: MixTemplate.NepomucenoBR Regex Learning Tool: This is a simple program designed to help people to study regular expressions.Pruebas: Pruebas is an open source game mix of text adventure and RPG written in Microsoft QBasic (under MS-DOS 6.22) that uses keyboard. Runs natively unde...Python Design by Contract: Simple to use invariants, pre- and postconditions which use some of the new metaprogramming features in Python 3.Rubik Cube's 3D Silverlight 3.0 Animated Solution: Rubik Cube's Silverlight 3.0 Animated Solution is a 3D presentation of Rubik Cube in range of up to 7x7x7 size with full functionality and an anima...Seminarka: Seminarka - ko treba znat šta je zna!SENAC 2010 - Projeto Integrador 2 (Material de Apoio): Material utilizado para apoiar os alunos da disciplina de Projeto integrador 2. O tema são sistemas web utilizando ASP.NET, com C# e banco de da...SENAC CG2010: Contém código apresentado em sala de aula para a disciplina de CG, 5ºBSI NoturnoSistema de facturación: Sistema de facturación desarrollado en C# para la clase de programación 3.SmartFront - WPF and Silverlight Toolkit: SmartFront is a framework piece which allow to quickly building Smart Client application in WPF and in Silverlight. This framework uses existing s...Solar 1: This is the ASP.NET MVC engine based on Oxite and used for 32planets.net.TemporalSQL: SQL Patterns - tables, queries, and functions - to design a temporal database. TFunkOrderSystem: The Funkalistic Blueprint and Items order management systemTribe.Cache: Tribe.Cache is a simple dictionary cache (persistent dictionary) written in C# which is easy to implement and use.tstProject: Testing ProjectUDC indexes parser: UDC (Universal Decimal Classification) indexes parserWebAssert: A test assertion library to assist in writing automated tests against websites. Allows for assertion of HTML validity, etc. Initially has support f...Words Via Subtitle: Words Via Subtitle makes it easier for English Learners to learn new words that appears in TV shows or movies. You'll no longer have to look up the...x5s - a cross site scripting (XSS) testing tool: x5s aims to be a specialized testing tool which assists penetration testers in finding cross-site scripting hot-spots. By auto-injecting token valu...XNA Shooter Engine: The XNA Shooter Engine is a game engine for XNA designed specifically with first-person-shooter-style games in mind. It's being developed for an as...我的开发集: for my study .net csharpNew ReleasesAppFabric Caching Admin Tool: AppFabric Caching Admin Tool 1.1: System Requirements:.NET 4.0 RC AppFabric Caching Beta2 Test On:Win 7 (64x) Note: Must run as Administrator !!!ASP.NET Google Maps: ASP.NET Google Maps 0.1b: Project Description Extensible and easy to use, this is ASP.NET Bing Maps Control. Drag & Drop and is ready to go. You can configure map style, add...AutoFixture: Version 1.0.9 (RC1): This is Release Candidate 1 of AutoFixture 1.1. This release contains no known bugs. Compared to AutoFixture 1.0, it fixes some bugs that were dis...Camlex.NET: Camlex.NET 2.0: Camlex.NET 2.0 release New features Search by field id Support for native System.Guid type for values Search by lookup id and lookup value D...CloudCache - Distributed Cache Tier with Azure: v1.0.0.1: New Release on April 1st 2010 No this is not April fools a new release has made it's way out. Below are the changes: Removed dependency on Azure S...DigitallyCreated Utilities: DigitallyCreated Utilities v1.0.1: This release is the v1.0.1 version of DigitallyCreated Utilities. This update is highly recommended for all users of v1.0.0 as it fixes a critical ...Fast Console: Fast Console Alpha: Fast Console is an easy to use and learn programming language. Code example is found in the file TestFile.xml When you've written your code just sa...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts 3.0.6 beta Released: Hi, This release contains following enhancements. * Zooming feature has been enhanced with the new functionality of ZoomRectangle. Now, users...Graphing Calculator in Silverlight: 1.0.1: Graphing Calculator for Silverlight is written entirely in C# and is based on the Silverlight 3 release. I will soon release the full documentation...Home Access Plus+: v3.2.0.1: v3.2.0.1 Release Change Log: Fixed: Issue with & ampersand File Changes: ~/bin/CHS Extranet.dll ~/bin/CHS Extranet.pdb ~/Scripts/viewmode.jsIcarus Scene Engine: Icarus Professional 2 Alpha 2 v 1.10.329.913: Alpha release 2 of Icarus Professional. This release includes: IcarusX: The ActiveX-based browser control for rendering IPX projects online. Icaru...Line Counter: 1.5.2: The Line Counter is a tool to calculate lines of your code files. The tool was written in .NET 2.0. Line Counter 1.5.2 Added General Code Counter ...ManagedCv: ManagedCv v0.0.0.1: Win32Mavention: Mavention Simple Menu: SharePoint 2010 ships with a menu control that allows you to render a site menu using semantic markup. Using the Mavention Simple Menu you can do t...MDownloader: MDownloader-0.15.10.57200: Fixed uploading.com links detection; Fixed downloading from uploading.com; Fixed downloading from load.to; Fixed detecting incompatible sources;MixMail: V1: MixMailMixTemplate: v1: releaseMvcPager: MvcPager 1.3 for ASP.NET MVC 1.0: MvcPager 1.3 for ASP.NET MVC 1.0 compiled assembly files and demo projectsMvcPager: MvcPager 1.3 for ASP.NET MVC 2.0: MvcPager 1.3 for ASP.NET MVC 2.0 compiled assembly and demo projectsMvcUnity - ASP.NET MVC Dependency Injection: 2.1 Source Code: Drop 2.1 Source CodeNepomucenoBR Regex Learning Tool: NepomucenoBR Regex Learning Tool v0.1 alpha: This is the first version of this application. If you find any bug, please contact me at http://www.nepomucenobr.com.brNepomucenoBR Regex Learning Tool: NepomucenoBR Regex Learning Tool v0.1 source-code: This is the first version of this application. If you find any bug, please contact me at http://www.nepomucenobr.com.brocculo: occulo 0.2 binaries: Release build binaries instead of debug, should now work for other users. Fixed bit rotation and output filename bugs.occulo: occulo 0.2 source: Second source release. See binary release for changes.Python Design by Contract: v0.1: This is the inital release. I think it is working fine.SharePoint Labs: SPLab5002A-FRA-Level200: SPLab5002A-FRA-Level200 This SharePoint Lab will teach you how to modify CAML schema to have IntelliSense on Feature's GUID. Lab Language : French ...SharePoint Labs: SPLab5003A-FRA-Level100: SPLab5003A-FRA-Level100 This SharePoint Lab will teach you how to manually create a Feature, how to brand a Feature and how to incorporate ressourc...SharePoint Labs: SPLab5004A-FRA-Level100: SPLab5004A-FRA-Level100 This SharePoint Lab will teach you how to create a Feature within Visual Studio, how to brand it, how to incorporate ressou...SharePoint Labs: SPLab5005A-FRA-Level100: SPLab5005A-FRA-Level100 This SharePoint Lab will teach you how to create a Feature within Visual Studio, how to brand it, how to incorporate ressou...SSIS ReportGeneratorTask: Version 1.53: Some bugfixes to version 1.52 beta Server Report properties can be displayed. Snapshots can be created. Screenshots of the planned version 1.53 ca...TemporalSQL: April 2010: Initial set of prototypes demonstrating temporal patterns, queries, and functions in SQL ServerTortoiseHg: TortoiseHg 1.0.1: TortoiseHg 1.0.1 is a bug fix release. We recommend all users upgrade to this release. http://bitbucket.org/tortoisehg/stable/wiki/ReleaseNotes#t...Tribe.Cache: Tribe.Cache Alpha: Functional Alpha Release - Do not use in productionTS3QueryLib.Net: TS3QueryLib.Net Version 0.21.15.0: Changelog Added class "ServerListItemBase" which is used in the new method "GetServerListShort" of QueryRunner class. (Change of Beta 21) Added ...UDC indexes parser: Runtime Binary Alpha 1: First alpha versionVisual Studio DSite: Text To Binary (Visual C++ 2008): A simple c program that can convert text to binary. Source code only.x5s - a cross site scripting (XSS) testing tool: x5s 1.0 beta: PLACEHOLDER (coming soon)XNA Shooter Engine: GDK Tools 0.1.0.0: This is a small, very early release of the GDK Tools. The only included tool is Input Map Editor.XPath Visualizer: XPathVisualizer v1.2: Last updated 1 April 2010. This is not a joke! includes new features: Ctrl-S shortcut key for Saving the XML file Ctrl-F shortcut for re-form...すとれおじさん(仮): すとれおじさん β 0.01: とりあえず公開のバージョンです。 中途半端な機能がいっぱいあります。Most Popular ProjectsRawrWBFS ManagerASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitAJAX Control ToolkitWindows Presentation Foundation (WPF)ASP.NETLiveUpload to FacebookMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrGraffiti CMSBase Class LibrariesjQuery Library for SharePoint Web ServicesBlogEngine.NETMicrosoft Biology FoundationN2 CMSLINQ to TwitterManaged Extensibility FrameworkFarseer Physics Engine

  Read the article

• CLSF & CLK 2013 Trip Report by Jeff Liu

  - by jamesmorris

  This is a contributed post from Jeff Liu, lead XFS developer for the Oracle mainline Linux kernel team. Recently, I attended both the China Linux Storage and Filesystem workshop (CLSF), and the China Linux Kernel conference (CLK), which were held in Shanghai. Here are the highlights for both events. CLSF - 17th October XFS update (led by Jeff Liu) XFS keeps rapid progress with a lot of changes, especially focused on the infrastructure/performance improvements as well as  new feature development.  This can be reflected with a sample statistics among XFS/Ext4+JBD2/Btrfs via: # git diff --stat --minimal -C -M v3.7..v3.12-rc4 -- fs/xfs|fs/ext4+fs/jbd2|fs/btrfs XFS: 141 files changed, 27598 insertions(+), 19113 deletions(-) Ext4+JBD2: 39 files changed, 10487 insertions(+), 5454 deletions(-) Btrfs: 70 files changed, 19875 insertions(+), 8130 deletions(-) What made up those changes in XFS? Self-describing metadata(CRC32c). This is a new feature and it contributed about 70% code changes, it can be enabled via `mkfs.xfs -m crc=1 /dev/xxx` for v5 superblock. Transaction log space reservation improvements. With this change, we can calculate the log space reservation at mount time rather than runtime to reduce the the CPU overhead. User namespace support. So both XFS and USERNS can be enabled on kernel configuration begin from Linux 3.10. Thanks Dwight Engen's efforts for this thing. Split project/group quota inodes. Originally, project quota can not be enabled with group quota at the same time because they were share the same quota file inode, now it works but only for v5 super block. i.e, CRC enabled. CONFIG_XFS_WARN, an new lightweight runtime debugger which can be deployed in production environment. Readahead log object recovery, this change can speed up the log replay progress significantly. Speculative preallocation inode tracking, clearing and throttling. The main purpose is to deal with inodes with post-EOF space due to speculative preallocation, support improved quota management to free up a significant amount of unwritten space when at or near EDQUOT. It support backgroup scanning which occurs on a longish interval(5 mins by default, tunable), and on-demand scanning/trimming via ioctl(2). Bitter arguments ensued from this session, especially for the comparison between Ext4 and Btrfs in different areas, I have to spent a whole morning of the 1st day answering those questions. We basically agreed on XFS is the best choice in Linux nowadays because: Stable, XFS has a good record in stability in the past 10 years. Fengguang Wu who lead the 0-day kernel test project also said that he has observed less error than other filesystems in the past 1+ years, I own it to the XFS upstream code reviewer, they always performing serious code review as well as testing. Good performance for large/small files, XFS does not works very well for small files has already been an old story for years. Best choice (maybe) for distributed PB filesystems. e.g, Ceph recommends delopy OSD daemon on XFS because Ext4 has limited xattr size. Best choice for large storage (>16TB). Ext4 does not support a single file more than around 15.95TB. Scalability, any objection to XFS is best in this point? :) XFS is better to deal with transaction concurrency than Ext4, why? The maximum size of the log in XFS is 2038MB compare to 128MB in Ext4. Misc. Ext4 is widely used and it has been proved fast/stable in various loads and scenarios, XFS just need more customers, and Btrfs is still on the road to be a manhood. Ceph Introduction (Led by Li Wang) This a hot topic.  Li gave us a nice introduction about the design as well as their current works. Actually, Ceph client has been included in Linux kernel since 2.6.34 and supported by Openstack since Folsom but it seems that it has not yet been widely deployment in production environment. Their major work is focus on the inline data support to separate the metadata and data storage, reduce the file access time, i.e, a file access need communication twice, fetch the metadata from MDS and then get data from OSD, and also, the small file access is limited by the network latency. The solution is, for the small files they would like to store the data at metadata so that when accessing a small file, the metadata server can push both metadata and data to the client at the same time. In this way, they can reduce the overhead of calculating the data offset and save the communication to OSD. For this feature, they have only run some small scale testing but really saw noticeable improvements. Test environment: Intel 2 CPU 12 Core, 64GB RAM, Ubuntu 12.04, Ceph 0.56.6 with 200GB SATA disk, 15 OSD, 1 MDS, 1 MON. The sequence read performance for 1K size files improved about 50%. I have asked Li and Zheng Yan (the core developer of Ceph, who also worked on Btrfs) whether Ceph is really stable and can be deployed at production environment for large scale PB level storage, but they can not give a positive answer, looks Ceph even does not spread over Dreamhost (subject to confirmation). From Li, they only deployed Ceph for a small scale storage(32 nodes) although they'd like to try 6000 nodes in the future. Improve Linux swap for Flash storage (led by Shaohua Li) Because of high density, low power and low price, flash storage (SSD) is a good candidate to partially replace DRAM. A quick answer for this is using SSD as swap. But Linux swap is designed for slow hard disk storage, so there are a lot of challenges to efficiently use SSD for swap. SWAPOUT swap_map scan swap_map is the in-memory data structure to track swap disk usage, but it is a slow linear scan. It will become a bottleneck while finding many adjacent pages in the use of SSD. Shaohua Li have changed it to a cluster(128K) list, resulting in O(1) algorithm. However, this apporoach needs restrictive cluster alignment and only enabled for SSD. IO pattern In most cases, the swap io is in interleaved pattern because of mutiple reclaimers or a free cluster is shared by all reclaimers. Even though block layer can merge interleaved IO to some extent, but we cannot count on it completely. Hence the per-cpu cluster is added base on the previous change, it can help reclaimer do sequential IO and the block layer will be easier to merge IO. TLB flush: If we're reclaiming one active page, we should first move the page from active lru list to inactive lru list, and then reclaim the page from inactive lru to swap it out. During the process, we need to clear PTE twice: first is 'A'(ACCESS) bit, second is 'P'(PRESENT) bit. Processors need to send lots of ipi which make the TLB flush really expensive. Some works have been done to improve this, including rework smp_call_functiom_many() or remove the first TLB flush in x86, but there still have some arguments here and only parts of works have been pushed to mainline. SWAPIN: Page fault does iodepth=1 sync io, but it's a little waste if only issue a page size's IO. The obvious solution is doing swap readahead. But the current in-kernel swap readahead is arbitary(always 8 pages), and it always doesn't perform well for both random and sequential access workload. Shaohua introduced a new flag for madvise(MADV_WILLNEED) to do swap prefetch, so the changes happen in userspace API and leave the in-kernel readahead unchanged(but I think some improvement can also be done here). SWAP discard As we know, discard is important for SSD write throughout, but the current swap discard implementation is synchronous. He changed it to async discard which allow discard and write run in the same time. Meanwhile, the unit of discard is also optimized to cluster. Misc: lock contention For many concurrent swapout and swapin , the lock contention such as anon_vma or swap_lock is high, so he changed the swap_lock to a per-swap lock. But there still have some lock contention in very high speed SSD because of swapcache address_space lock. Zproject (led by Bob Liu) Bob gave us a very nice introduction about the current memory compression status. Now there are 3 projects(zswap/zram/zcache) which all aim at smooth swap IO storm and promote performance, but they all have their own pros and cons. ZSWAP It is implemented based on frontswap API and it uses a dynamic allocater named Zbud to allocate free pages. Zbud means pairs of zpages are "buddied" and it can only store at most two compressed pages in one page frame, so the max compress ratio is 50%. Each page frame is lru-linked and can do shink in memory pressure. If the compressed memory pool reach its limitation, shink or reclaim happens. It decompress the page frame into two new allocated pages and then write them to real swap device, but it can fail when allocating the two pages. ZRAM Acts as a compressed ramdisk and used as swap device, and it use zsmalloc as its allocator which has high density but may have fragmentation issues. Besides, page reclaim is hard since it will need more pages to uncompress and free just one page. ZRAM is preferred by embedded system which may not have any real swap device. Now both ZRAM and ZSWAP are in driver/staging tree, and in the mm community there are some disscussions of merging ZRAM into ZSWAP or viceversa, but no agreement yet. ZCACHE Handles file page compression but it is removed out of staging recently. From industry (led by Tang Jie, LSI) An LSI engineer introduced several new produces to us. The first is raid5/6 cards that it use full stripe writes to improve performance. The 2nd one he introduced is SandForce flash controller, who can understand data file types (data entropy) to reduce write amplification (WA) for nearly all writes. It's called DuraWrite and typical WA is 0.5. What's more, if enable its Dynamic Logical Capacity function module, the controller can do data compression which is transparent to upper layer. LSI testing shows that with this virtual capacity enables 1x TB drive can support up to 2x TB capacity, but the application must monitor free flash space to maintain optimal performance and to guard against free flash space exhaustion. He said the most useful application is for datebase. Another thing I think it's worth to mention is that a NV-DRAM memory in NMR/Raptor which is directly exposed to host system. Applications can directly access the NV-DRAM via a memory address - using standard system call mmap(). He said that it is very useful for database logging now. This kind of NVM produces are beginning to appear in recent years, and it is said that Samsung is building a research center in China for related produces. IMHO, NVM will bring an effect to current os layer especially on file system, e.g. its journaling may need to redesign to fully utilize these nonvolatile memory. OCFS2 (led by Canquan Shen) Without a doubt, HuaWei is the biggest contributor to OCFS2 in the past two years. They have posted 46 upstream patches and 39 patches have been merged. Their current project is based on 32/64 nodes cluster, but they also tried 128 nodes at the experimental stage. The major work they are working is to support ATS (atomic test and set), it can be works with DLM at the same time. Looks this idea is inspired by the vmware VMFS locking, i.e, http://blogs.vmware.com/vsphere/2012/05/vmfs-locking-uncovered.html CLK - 18th October 2013 Improving Linux Development with Better Tools (Andi Kleen) This talk focused on how to find/solve bugs along with the Linux complexity growing. Generally, we can do this with the following kind of tools: Static code checkers tools. e.g, sparse, smatch, coccinelle, clang checker, checkpatch, gcc -W/LTO, stanse. This can help check a lot of things, simple mistakes, complex problems, but the challenges are: some are very slow, false positives, may need a concentrated effort to get false positives down. Especially, no static checker I found can follow indirect calls (“OO in C”, common in kernel): struct foo_ops { int (*do_foo)(struct foo *obj); } foo->do_foo(foo); Dynamic runtime checkers, e.g, thread checkers, kmemcheck, lockdep. Ideally all kernel code would come with a test suite, then someone could run all the dynamic checkers. Fuzzers/test suites. e.g, Trinity is a great tool, it finds many bugs, but needs manual model for each syscall. Modern fuzzers around using automatic feedback, but notfor kernel yet: http://taviso.decsystem.org/making_software_dumber.pdf Debuggers/Tracers to understand code, e.g, ftrace, can dump on events/oops/custom triggers, but still too much overhead in many cases to run always during debug. Tools to read/understand source, e.g, grep/cscope work great for many cases, but do not understand indirect pointers (OO in C model used in kernel), give us all “do_foo” instances: struct foo_ops { int (*do_foo)(struct foo *obj); } = { .do_foo = my_foo }; foo>do_foo(foo); That would be great to have a cscope like tool that understands this based on types/initializers XFS: The High Performance Enterprise File System (Jeff Liu) [slides] I gave a talk for introducing the disk layout, unique features, as well as the recent changes.   The slides include some charts to reflect the performances between XFS/Btrfs/Ext4 for small files. About a dozen users raised their hands when I asking who has experienced with XFS. I remembered that when I asked the same question in LinuxCon/Japan, only 3 people raised their hands, but they are Chris Mason, Ric Wheeler, and another attendee. The attendee questions were mainly focused on stability, and comparison with other file systems. Linux Containers (Feng Gao) The speaker introduced us that the purpose for those kind of namespaces, include mount/UTS/IPC/Network/Pid/User, as well as the system API/ABI. For the userspace tools, He mainly focus on the Libvirt LXC rather than us(LXC). Libvirt LXC is another userspace container management tool, implemented as one type of libvirt driver, it can manage containers, create namespace, create private filesystem layout for container, Create devices for container and setup resources controller via cgroup. In this talk, Feng also mentioned another two possible new namespaces in the future, the 1st is the audit, but not sure if it should be assigned to user namespace or not. Another is about syslog, but the question is do we really need it? In-memory Compression (Bob Liu) Same as CLSF, a nice introduction that I have already mentioned above. Misc There were some other talks related to ACPI based memory hotplug, smart wake-affinity in scheduler etc., but my head is not big enough to record all those things. -- Jeff Liu

  Read the article

• eBooks on iPad vs. Kindle: More Debate than Smackdown

  - by andrewbrust

  When the iPad was presented at its San Francisco launch event on January 28th, Steve Jobs spent a significant amount of time explaining how well the device would serve as an eBook reader. He showed the iBooks reader application and iBookstore and laid down the gauntlet before Amazon and its beloved Kindle device. Almost immediately afterwards, criticism came rushing forth that the iPad could never beat the Kindle for book reading. The curious part of that criticism is that virtually no one offering it had actually used the iPad yet. A few weeks later, on April 3rd, the iPad was released for sale in the United States. I bought one on that day and in the few additional weeks that have elapsed, I’ve given quite a workout to most of its capabilities, including its eBook features. I’ve also spent some time with the Kindle, albeit a first-generation model, to see how it actually compares to the iPad. I had some expectations going in, but I came away with conclusions about each device that were more scenario-based than absolute. I present my findings to you here.   Vital Statistics Let’s start with an inventory of each device’s underlying technology. The iPad has a color, backlit LCD screen and an on-screen keyboard. It has a battery which, on a full charge, lasts anywhere from 6-10 hours. The Kindle offers a monochrome, reflective E Ink display, a physical keyboard and a battery that on my first gen loaner unit can go up to a week between charges (Amazon claims the battery on the Kindle 2 can last up to 2 weeks on a single charge). The Kindle connects to Amazon’s Kindle Store using a 3G modem (the technology and network vary depending on the model) that incurs no airtime service charges whatsoever. The iPad units that are on-sale today work over WiFi only. 3G-equipped models will be on sale shortly and will command a $130 premium over their WiFi-only counterparts. 3G service on the iPad, in the U.S. from AT&T, will be fee-based, with a 250MB plan at $14.99 per month and an unlimited plan at $29.99. No contract is required for 3G service. All these tech specs aside, I think a more useful observation is that the iPad is a multi-purpose Internet-connected entertainment device, while the Kindle is a dedicated reading device. The question is whether those differences in design and intended use create a clear-cut winner for reading electronic publications. Let’s take a look at each device, in isolation, now.   Kindle To me, what’s most innovative about the Kindle is its E Ink display. E Ink really looks like ink on a sheet of paper. It requires no backlight, it’s fully visible in direct sunlight and it causes almost none of the eyestrain that LCD-based computer display technology (like that used on the iPad) does. It’s really versatile in an all-around way. Forgive me if this sounds precious, but reading on it is really a joy. In fact, it’s a genuinely relaxing experience. Through the Kindle Store, Amazon allows users to download books (including audio books), magazines, newspapers and blog feeds. Books and magazines can be purchased either on a single-issue basis or as an annual subscription. Books, of course, are purchased singly. Oddly, blogs are not free, but instead carry a monthly subscription fee, typically $1.99. To me this is ludicrous, but I suppose the free 3G service is partially to blame. Books and magazine issues download quickly. Magazine and blog subscriptions cause new issues or posts to be pushed to your device on an automated basis. Available blogs include 9000-odd feeds that Amazon offers on the Kindle Store; unless I missed something, arbitrary RSS feeds are not supported (though there are third party workarounds to this limitation). The shopping experience is integrated well, has an huge selection, and offers certain graphical perks. For example, magazine and newspaper logos are displayed in menus, and book cover thumbnails appear as well. A simple search mechanism is provided and text entry through the physical keyboard is relatively painless. It’s very easy and straightforward to enter the store, find something you like and start reading it quickly. If you know what you’re looking for, it’s even faster. Given Kindle’s high portability, very reliable battery, instant-on capability and highly integrated content acquisition, it makes reading on whim, and in random spurts of downtime, very attractive. The Kindle’s home screen lists all of your publications, and easily lets you select one, then start reading it. Once opened, publications display in crisp, attractive text that is adjustable in size. “Turning” pages is achieved through buttons dedicated to the task. Notes can be recorded, bookmarks can be saved and pages can be saved as clippings. I am not an avid book reader, and yet I found the Kindle made it really fun, convenient and soothing to read. There’s something about the easy access to the material and the simplicity of the display that makes the Kindle seduce you into chilling out and reading page after page. On the other hand, the Kindle has an awkward navigation interface. While menus are displayed clearly on the screen, the method of selecting menu items is tricky: alongside the right-hand edge of the main display is a thin column that acts as a second display. It has a white background, and a scrollable silver cursor that is moved up or down through the use of the device’s scrollwheel. Picking a menu item on the main display involves scrolling the silver cursor to a position parallel to that menu item and pushing the scrollwheel in. This navigation technique creates a disconnect, literally. You don’t really click on a selection so much as you gesture toward it. I got used to this technique quickly, but I didn’t love it. It definitely created a kind of anxiety in me, making me feel the need to speed through menus and get to my destination document quickly. Once there, I could calm down and relax. Books are great on the Kindle. Magazines and newspapers much less so. I found the rendering of photographs, and even illustrations, to be unacceptably crude. For this reason, I expect that reading textbooks on the Kindle may leave students wanting. I found that the original flow and layout of any publication was sacrificed on the Kindle. In effect, browsing a magazine or newspaper was almost impossible. Reading the text of individual articles was enjoyable, but having to read this way made the whole experience much more “a la carte” than cohesive and thematic between articles. I imagine that for academic journals this is ideal, but for consumer publications it imposes a stripped-down, low-fidelity experience that evokes a sense of deprivation. In general, the Kindle is great for reading text. For just about anything else, especially activity that involves exploratory browsing, meandering and short-attention-span reading, it presents a real barrier to entry and adoption. Avid book readers will enjoy the Kindle (if they’re not already). It’s a great device for losing oneself in a book over long sittings. Multitaskers who are more interested in periodicals, be they online or off, will like it much less, as they will find compromise, and even sacrifice, to be palpable.   iPad The iPad is a very different device from the Kindle. While the Kindle is oriented to pages of text, the iPad orbits around applications and their interfaces. Be it the pinch and zoom experience in the browser, the rich media features that augment content on news and weather sites, or the ability to interact with social networking services like Twitter, the iPad is versatile. While it shares a slate-like form factor with the Kindle, it’s effectively an elegant personal computer. One of its many features is the iBook application and integration of the iBookstore. But it’s a multi-purpose device. That turns out to be good and bad, depending on what you’re reading. The iBookstore is great for browsing. It’s color, rich animation-laden user interface make it possible to shop for books, rather than merely search and acquire them. Unfortunately, its selection is rather sparse at the moment. If you’re looking for a New York Times bestseller, or other popular titles, you should be OK. If you want to read something more specialized, it’s much harder. Unlike the awkward navigation interface of the Kindle, the iPad offers a nearly flawless touch-screen interface that seduces the user into tinkering and kibitzing every bit as much as the Kindle lulls you into a deep, concentrated read. It’s a dynamic and interactive device, whereas the Kindle is static and passive. The iBook reader is slick and fun. Use the iPad in landscape mode and you can read the book in 2-up (left/right 2-page) display; use it in portrait mode and you can read one page at a time. Rather than clicking a hardware button to turn pages, you simply drag and wipe from right-to-left to flip the single or right-hand page. The page actually travels through an animated path as it would in a physical book. The intuitiveness of the interface is uncanny. The reader also accommodates saving of bookmarks, searching of the text, and the ability to highlight a word and look it up in a dictionary. Pages display brightly and clearly. They’re easy to read. But the backlight and the glare made me less comfortable than I was with the Kindle. The knowledge that completely different applications (including the Web and email and Twitter) were just a few taps away made me antsy and very tempted to task-switch. The knowledge that battery life is an issue created subtle discomfort. If the Kindle makes you feel like you’re in a library reading room, then the iPad makes you feel, at best, like you’re under fluorescent lights at a Barnes and Noble or Borders store. If you’re lucky, you’d be on a couch or at a reading table in the store, but you might also be standing up, in the aisles. Clearly, I didn’t find this conducive to focused and sustained reading. But that may have more to do with my own tendency to read periodicals far more than books, and my neurotic . And, truth be known, the book reading experience, when not explicitly compared to Kindle’s, was still pleasant. It is also important to point out that Kindle Store-sourced books can be read on the iPad through a Kindle reader application, from Amazon, specific to the device. This offered a less rich experience than the iBooks reader, but it was completely adequate. Despite the Kindle brand of the reader, however, it offered little in terms of simulating the reading experience on its namesake device. When it comes to periodicals, the iPad wins hands down. Magazines, even if merely scanned images of their print editions, read on the iPad in a way that felt similar to reading hard copy. The full color display, touch navigation and even the ability to render advertisements in their full glory makes the iPad a great way to read through any piece of work that is measured in pages, rather than chapters. There are many ways to get magazines and newspapers onto the iPad, including the Zinio reader, and publication-specific applications like the Wall Street Journal’s and Popular Science’s. The New York Times’ free Editors’ Choice application offers a Times Reader-like interface to a subset of the Gray Lady’s daily content. The completely Web-based but iPad-optimized Times Skimmer site (at www.nytimes.com/timesskimmer) works well too. Even conventional Web sites themselves can be read much like magazines, given the iPad’s ability to zoom in on the text and crop out advertisements on the margins. While the Kindle does have an experimental Web browser, it reminded me a lot of early mobile phone browsers, only in a larger size. For text-heavy sites with simple layout, it works fine. For just about anything else, it becomes more trouble than it’s worth. And given the way magazine articles make me think of things I want to look up online, I think that’s a real liability for the Kindle.   Summing Up What I came to realize is that the Kindle isn’t so much a computer or even an Internet device as it is a printer. While it doesn’t use physical paper, it still renders its content a page at a time, just like a laser printer does, and its output appears strikingly similar. You can read the rendered text, but you can’t interact with it in any way. That’s why the navigation requires a separate cursor display area. And because of the page-oriented rendering behavior, turning pages causes a flash on the display and requires a sometimes long pause before the next page is rendered. The good side of this is that once the page is generated, no battery power is required to display it. That makes for great battery life, optimal viewing under most lighting conditions (as long as there is some light) and low-eyestrain text-centric display of content. The Kindle is highly portable, has an excellent selection in its store and is refreshingly distraction-free. All of this is ideal for reading books. And iPad doesn’t offer any of it. What iPad does offer is versatility, variety, richness and luxury. It’s flush with accoutrements even if it’s low on focused, sustained text display. That makes it inferior to the Kindle for book reading. But that also makes it better than the Kindle for almost everything else. As such, and given that its book reading experience is still decent (even if not superior), I think the iPad will give Kindle a run for its money. True book lovers, and people on a budget, will want the Kindle. People with a robust amount of discretionary income may want both devices. Everyone else who is interested in a slate form factor e-reading device, especially if they also wish to have leisure-friendly Internet access, will likely choose the iPad exclusively. One thing is for sure: iPad has reduced Kindle’s market, and may have shifted its mass market potential to a mere niche play. If Amazon is smart, it will improve its iPad-based Kindle reader app significantly. It can then leverage the iPad channel as a significant market for the Kindle Store. After all, selling the eBooks themselves is what Amazon should care most about.

  Read the article

• CodePlex Daily Summary for Friday, February 11, 2011

  CodePlex Daily Summary for Friday, February 11, 2011Popular ReleasesSnoop, the WPF Spy Utility: Snoop 2.6.1: This release is a bug fixing release. Most importantly, issues have been seen around WPF 4.0 applications not always showing up in the app chooser. Hopefully, they are fixed now. I thought this issue warranted a minor release since more and more people are going WPF 4.0 and I don't want anyone to have any problems. Dan Hanan also contributes again with several usability features. Thanks Dan! Happy Snooping! p.s. By request, I am also attaching a .zip file ... so that people can install it ...RIBA - Rich Internet Business Application for Silverlight: Preview of MVVM Framework Source + Tutorials: This is a first public release of the MVVM Framework which is part of the final RIBA application. The complete RIBA example LOB application has yet to be published. Further Documentation on the MVVM part can be found on the Blog, http://www.SilverlightBlog.Net and in the downloadable source ( mvvm/doc/ ). Please post all issues and suggestions in the issue tracker.SharePoint Learning Kit: 1.5: SharePoint Learning Kit 1.5 has the following new functionality: *Support for SharePoint 2010 *E-Learning Actions can be localised *Two New Document Library Edit Options *Automatically add the Assignment List Web Part to the Web Part Gallery *Various Bug Fixes for the Drop Box There are 2 downloads for this release SLK-1.5-2010.zip for SharePoint 2010 SLK-1.5-2007.zip for SharePoint 2007 (WSS3 & MOSS 2007)Facebook C# SDK: 5.0.3 (BETA): This is fourth BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. For more information about this release see the following blog posts: Facebook C# SDK - Writing your first Facebook Application Facebook C# SDK v5 Beta Internals Facebook C# SDK V5.0.0 (BETA) Released We have spend time trying ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.161: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release adds a new Twitter List network importer, makes some minor feature improvements, and fixes a few bugs. See the Complete NodeXL Release History for details. Installation StepsFollow these steps to install and use the template: Download the Zip file. Unzip it into any folder. Use WinZip or a similar program, or just right-click the Zip file...WatchersNET.TagCloud: WatchersNET.TagCloud 01.09.03: Whats NewAdded New Skin TagTastic http://www.watchersnet.de/Portals/0/screenshots/dnn/TagCloud-TagTastic-Skin.jpg Added New Skin RoundedButton http://www.watchersnet.de/Portals/0/screenshots/dnn/TagCloud-RoundedButton-Skin.jpg changes Tag Count fixed on Tag Source Referrals Fixed Tag Count when multiple Tag Sources are usedExtremeML: ExtremeML v1.0 Beta 3: VS solution source code updated for compatibility with VS2010 (accommodates VS2010 breaking changes in T4 template support).Finestra Virtual Desktops: 1.1: This release adds a few more performance and graphical enhancements to 1.0. Switching desktops is now about as fast as you can blink. Desktop switching optimizations New welcome wizard for Vista/7 Fixed a few minor bugs Added a few more options to the options dialog (including ability to disable the taskbar switching)WCF Data Services Toolkit: WCF Data Services Toolkit: The source code and binary releases of the WCF Data Services Toolkit. For simplicity, the source code download doesn't include any of the MSTest files. If you want those, you can pull the code down via MercurialyoutubeFisher: youtubeFisher 3.0 [beta]: What's new: Video capturing improved Supports YouTube's new layout (january 2011) Internal refactoringNearforums - ASP.NET MVC forum engine: Nearforums v5.0: Version 5.0 of the ASP.NET MVC Forum Engine, containing the following improvements: .NET 4.0 as target framework using ASP.NET MVC 3. All views migrated to Razor for cleaner markup. Alternate template (Layout file) for mobile devices 4 Bug Fixes since Version 4.1 Visit the project Roadmap for more details. Webdeploy package sha1 checksum: 28785b7248052465ea0738a7775e8e8744d84c27fuv: 1.0 release, codename Chopper Joe: features: search/replace :o to open file :s to save file :q to quitASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager html generation optimized new features for the lookup (add additional search data ) live demo went aeroEnhSim: EnhSim 2.3.6 BETA: 2.3.6 BETAThis release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Changes since 2.3.0 ...TestApi - a library of Test APIs: TestApi v0.6: TestApi v0.6 comes with the following changes: TestApi code development has been moved to Codeplex: Moved TestApi soluton to VS 2010; Moved all source code to Codeplex. All development work is done there now. Fault Injection API: Integrated the unmanaged FaultInjectionEngine.dll COM component in the build; Cleaned up FaultInjectionEngine.dll to build at warning level 4; Implemented “FaultScope” which allows for in-process fault injection; Added automation scripts & sample program; ...AutoLoL: AutoLoL v1.5.5: AutoChat now allows up to 6 items. Items with nr. 7-0 will be removed! News page url's are now opened in the default browser Added a context menu to the system tray icon (thanks to Alex Banagos) AutoChat now allows configuring the Chat Keys and the Modifier Key The recent files list now supports compact and full mode Fix: Swapped mouse buttons are now properly detected Fix: Sometimes the Play button was pressed while still greyed out Champion: Karma Note: You can also run the u...mojoPortal: 2.3.6.2: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2362-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Rawr: Rawr 4.0.19 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...IronRuby: 1.1.2: IronRuby 1.1.2 is a servicing release that keeps on improving compatibility with Ruby 1.9.2 and includes IronRuby integration to Visual Studio 2010. We decided to drop 1.8.6 compatibility mode in all post-1.0 releases. We recommend using IronRuby 1.0 if you need 1.8.6 compatibility. In this release we fixed several major issues: - problems that blocked Gem installation in certain cases - regex syntax: the parser was replaced with a new one that is much more compatible with Ruby 1.9.2 - cras...MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (4): There was a small issue with the previous release that caused errors when installing the templates in VS10 Express. This release corrects the error. Only use this if you encountered issues when installing the previous release. No changes in the binaries.New ProjectsAlchemySearch: A middleware application that allows the searching of Open Text's Alchemy application from a command line or from a calling application. C# .NET 4alltuan: all tuan infoasp.net mvc 2.0 ??????: asp.net mvc 2.0 ??????Basic Text File Generator: This is an investigatory development that creates text files from a windows forms app.bisolu_luc: nothing yetCriteria Pack for EPiServer CMS: This is a collection of useful criteria for extending the personalization mechanism, Visitor Groups, in EPiServer CMS 6 R2 (or later).CTRNN.NET: CTRNN.NET is a C# implementation of Continuous Time Recurrent Neural Networks.DXperience Toolkit: Complimentary controls and libraries from DevExpress.Excel Library for Small Basic: This library extend Small Basic to allows you to read or write contents of a cell in the Excel file from Small Basic program. ???????? Small Basic ????、Small Basic ??? Excel ???????????????????。HealthVault Eventing Sample: A sample application demonstrating the new HealthVault Eventing feature.Hitcents Blog - Example Code: Contains various source code examples from articles at http://www.hitcents.com/blog. Brought to you by Hitcents.INI Modifier: A proprietary application to amend users ini files for JBAe automatically from a central control file.issueIT.net - ”I just found the last bug”: issueIT is the best open source web-based issue tracker for .NET. It’s easy to customize to suit your organization. This project is not finished yet - it is only at a very early stage Leage of Legends Masteries Tool: -Small, portable and fast tool to help you set your masteries. -No Install. -Masteries saved in the same folder: "lolMasterSet.dat" (text file) How to use: - Run and then go to masteries tab in League of Legends luncher. You should see the overlay. Memory View controls: Memory View controls are a pair of controls for real time and static viewing and editing of a memory space. MemoryHexEditor is a hex editor that supports viewing and editing memory, and MemoryHeatMap is a time-based graphical view that shows how memory is read and written to.Moq Contrib: Community contributions to Moq.Operating System Basic: Sistema operacional desenvolvido em QuickBasic, durante minha adolecência.PAiRS - A WPF Memory Card Game: PAiRS is an implementation of a card matching game in which you are given an even number of cards face down in a grid, and you try to flip over 2 cards at a time to create a match until all cards are matched. PAiRS is built using C#, .Net 3.5+ and WPF.RIBA - Rich Internet Business Application for Silverlight: RIBA is an example LOB application with many features to show how to build distributed and secure Line of Business applications based on Silverlight 4. You can find the official blog on www.silverlightblog.netSearcher: Searcher is a Windows Phone project which allows you to quickly search using multiple search engines. SharePoint Term Store Powershell Utilities: An assortment of PowerShell script-based utilities to perform actions on the SharePoint Managed Metadata Term Store. PowerShell script-based utilities have been chosen rather than cmdlets as they are more suitable for environments that have strict installation policies.SmartHotelFoundation: Smart Hotel FoundationSumer Filemanager: This project ensured fully ajax based file management.The Open Source PMU: The Open Source PMU Project provides resources that enable you to build your own SynchroPhasor sensor for use with the openPDC project, research, development, or electric grid observation.Trail Blazer: Movie Trailer Fetcher - Downloads trailers for movies in a collection and saves them in movie folder. It is being developed as a companion to Meta Data Fetchers for the Media Browser project. It is being developed as a standalone C# app but a frontend in MCML is being considered.University Project Tracker: University Project TrackerVideo Backup Fusion: The complete and simply to use backup solution for video portalsWPF ShellFactory: WPF ShellFactory is an easy-to-use application framework for WPF, using a system derived from M-V-VM for its views. It supports multiple modules, either statically or dynamically loaded (i.e. plugins). It also contains mechanisms for application-wide services.

  Read the article

• You should NOT be writing jQuery in SharePoint if&hellip;

  - by Mark Rackley

  Yes… another one of these posts. What can I say? I’m a pot stirrer.. a rabble rouser *rabble rabble* jQuery in SharePoint seems to be a fairly polarizing issue with one side thinking it is the most awesome thing since Princess Leia as the slave girl in Return of the Jedi and the other half thinking it is the worst idea since Mannequin 2: On the Move. The correct answer is OF COURSE “it depends”. But what are those deciding factors that make jQuery an awesome fit or leave a bad taste in your mouth? Let’s see if I can drive the discussion here with some polarizing comments of my own… I know some of you are getting ready to leave your comments even now before reading the rest of the blog, which is great! Iron sharpens iron… These discussions hopefully open us up to understanding the entire process better and think about things in a different way. You should not be writing jQuery in SharePoint if you are not a developer… Let’s start off with my most polarizing and rant filled portion of the blog post. If you don’t know what you are doing or you don’t have a background that helps you understand the implications of what you are writing then you should not be writing jQuery in SharePoint! I truly believe that one of the biggest reasons for the jQuery haters is because of all the bad jQuery out there. If you don’t know what you are doing you can do some NASTY things! One of the best stories I’ve heard about this is from my good friend John Ferringer (@ferringer). John tells this story during our Mythbusters session we do together. One of his clients was undergoing a Denial of Service attack and they couldn’t figure out what was going on! After much searching they found that some genius jQuery developer wrote some code for an image rotator, but did not take into account what happens when there are no images to load! The code just kept hitting the servers over and over and over again which prevented anything else from getting done! Now, I’m NOT saying that I have not done the same sort of thing in the past or am immune from such mistakes. My point is that if you don’t know what you are doing, there are very REAL consequences that can have a major impact on your organization AND they will be hard to track down.  Think how happy your boss will be after you copy and pasted some jQuery from a blog without understanding what it does, it brings down the farm, AND it takes them 3 days to track it back to you.  :/ Good times will not be had. Like it or not JavaScript/jQuery is a programming language. While you .NET people sit on your high horses because your code is compiled and “runs faster” (also debatable), the rest of us will be actually getting work done and delivering solutions while you are trying to figure out why your widget won’t deploy. I can pick at that scab because I write .NET code too and speak from experience. I can do both, and do both well. So, I am not speaking from ignorance here. In JavaScript/jQuery you have variables, loops, conditionals, functions, arrays, events, and built in methods. If you are not a developer you just aren’t going to take advantage of all of that and use it correctly. Ahhh.. but there is hope! There is a lot of jQuery resources out there to help you learn and learn well! There are many experts on the subject that will gladly tell you when you are smoking crack. I just this minute saw a tweet from @cquick with a link to: “jQuery Fundamentals”. I just glanced through it and this may be a great primer for you aspiring jQuery devs. Take advantage of all the resources and become a developer! Hey, it will look awesome on your resume right? You should not be writing jQuery in SharePoint if it depends too much on client resources for a good user experience I’ve said it once and I’ll say it over and over until you understand. jQuery is executed on the client’s computer. Got it? If you are looping through hundreds of rows of data, searching through an enormous DOM, or performing many calculations it is going to take some time! AND if your user happens to be sitting on some old PC somewhere that they picked up at a garage sale their experience will be that much worse! If you can’t give the user a good experience they will not use the site. So, if jQuery is causing the user to have a bad experience, don’t use it. I sometimes go as far to say that you should NOT go to jQuery as a first option for external facing web sites because you have ZERO control over what the end user’s computer will be. You just can’t guarantee an awesome user experience all of the time. Ahhh… but you have no choice? (where have I heard that before?). Well… if you really have no choice, here are some tips to help improve the experience: Avoid screen scraping This is not 1999 and SharePoint is not an old green screen from a mainframe… so why are you treating it like it is? Screen scraping is time consuming and client intensive. Take advantage of tools like SPServices to do your data retrieval when possible. Fine tune your DOM searches A lot of time can be eaten up just searching the DOM and ignoring table rows that you don’t need. Write better jQuery to only loop through tables rows that you need, or only access specific elements you need. Take advantage of Element ID’s to return the one element you are looking for instead of looping through all the DOM over and over again. Write better jQuery Remember this is development. Think about how you can write cleaner, faster jQuery. This directly relates to the previous point of improving your DOM searches, but also when using arrays, variables and loops. Do you REALLY need to loop through that array 3 times? How can you knock it down to 2 times or even 1? When you have lots of calculations and data that you are manipulating every operation adds up. Think about how you can streamline it. Back in the old days before RAM was abundant, Cores were plentiful and dinosaurs roamed the earth, us developers had to take performance into account in everything we did. It’s a lost art that really needs to be used here. You should not be writing jQuery in SharePoint if you are sending a lot of data over the wire… Developer:  “Awesome… you can easily call SharePoint’s web services to retrieve and write data using SPServices!” Administrator: “Crap! you can easily call SharePoint’s web services to retrieve and write data using SPServices!” SPServices may indeed be the best thing that happened to SharePoint since the invention of SharePoint Saturdays by Godfather Lotter… BUT you HAVE to use it wisely! (I REFUSE to make the Spiderman reference). If you do not know what you are doing your code will bring back EVERY field and EVERY row from a list and push that over the internet with all that lovely XML wrapped around it. That can be a HUGE amount of data and will GREATLY impact performance! Calling several web service methods at the same time can cause the same problem and can negatively impact your SharePoint servers. These problems, thankfully, are not difficult to rectify if you are careful: Limit list data retrieved Use CAML to reduce the number of rows returned and limit the fields returned using ViewFields.  You should definitely be doing this regardless. If you aren’t I hope your admin thumps you upside the head. Batch large list updates You may or may not have noticed that if you try to do large updates (hundreds of rows) that the performance is either completely abysmal or it fails over half the time. You can greatly improve performance and avoid timeouts by breaking up your updates into several smaller updates. I don’t know if there is a magic number for best performance, it really depends on how much data you are sending back more than the number of rows. However, I have found that 200 rows generally works well.  Play around and find the right number for your situation. Delay Web Service calls when possible One of the cool things about jQuery and SPServices is that you can delay queries to the server until they are actually needed instead of doing them all at once. This can lead to performance improvements over DataViewWebParts and even .NET code in the right situations. So, don’t load the data until it’s needed. In some instances you may not need to retrieve the data at all, so why retrieve it ALL the time? You should not be writing jQuery in SharePoint if there is a better solution… jQuery is NOT the silver bullet in SharePoint, it is not the answer to every question, it is just another tool in the developers toolkit. I urge all developers to know what options exist out there and choose the right one! Sometimes it will be jQuery, sometimes it will be .NET,  sometimes it will be XSL, and sometimes it will be some other choice… So, when is there a better solution to jQuery? When you can’t get away from performance problems Sometimes jQuery will just give you horrible performance regardless of what you do because of unavoidable obstacles. In these situations you are going to have to figure out an alternative. Can I do it with a DVWP or do I have to crack open Visual Studio? When you need to do something that jQuery can’t do There are lots of things you can’t do in jQuery like elevate privileges, event handlers, workflows, or interact with back end systems that have no web service interface. It just can’t do everything. When it can be done faster and more efficiently another way Why are you spending time to write jQuery to do a DataViewWebPart that would take 5 minutes? Or why are you trying to implement complicated logic that would be simple to do in .NET? If your answer is that you don’t have the option, okay. BUT if you do have the option don’t reinvent the wheel! Take advantage of the other tools. The answer is not always jQuery… sorry… the kool-aid tastes good, but sweet tea is pretty awesome too. You should not be using jQuery in SharePoint if you are a moron… Let’s finish up the blog on a high note… Yes.. it’s true, I sometimes type things just to get a reaction… guess this section title might be a good example, but it feels good sometimes just to type the words that a lot of us think… So.. don’t be that guy! Another good buddy of mine that works for Microsoft told me. “I loved jQuery in SharePoint…. until I had to support it.”. He went on to explain that some user was making several web service calls on a page using jQuery and then was calling Microsoft and COMPLAINING because the page took so long to load… DUH! What do you expect to happen when you are pushing that much data over the wire and are making that many web service calls at once!! It’s one thing to write that kind of code and accept it’s just going to take a while, it’s COMPLETELY another issue to do that and then complain when it’s not lightning fast!  Someone’s gene pool needs some chlorine. So, I think this is a nice summary of the blog… DON’T be that guy… don’t be a moron. How can you stop yourself from being a moron? Ah.. glad you asked, here are some tips: Think Is jQuery the right solution to my problem? Is there a better approach? What are the implications and pitfalls of using jQuery in this situation? Search What are others doing? Does someone have a better solution? Is there a third party library that does the same thing I need? Plan Write good jQuery. Limit calculations and data sent over the wire and don’t reinvent the wheel when possible. Test Okay, it works well on your machine. Try it on others ESPECIALLY if this is for an external site. Test with empty data. Test with hundreds of rows of data. Test as many scenarios as possible. Monitor those server resources to see the impact there as well. Ask the experts As smart as you are, there are people smarter than you. Even the experts talk to each other to make sure they aren't doing something stupid. And for the MOST part they are pretty nice guys. Marc Anderson and Christophe Humbert are two guys who regularly keep me in line. Make sure you aren’t doing something stupid. Repeat So, when you think you have the best solution possible, repeat the steps above just to be safe.  Conclusion jQuery is an awesome tool and has come in handy on many occasions. I’m even teaching a 1/2 day SharePoint & jQuery workshop at the upcoming SPTechCon in Boston if you want to berate me in person. However, it’s only as awesome as the developer behind the keyboard. It IS development and has its pitfalls. Knowledge and experience are invaluable to giving the user the best experience possible.  Let’s face it, in the end, no matter our opinions, prejudices, or ego providing our clients, customers, and users with the best solution possible is what counts. Period… end of sentence…

  Read the article

• CodePlex Daily Summary for Wednesday, June 29, 2011

  CodePlex Daily Summary for Wednesday, June 29, 2011Popular ReleasesCandescent NUI: Candescent NUI (8263): This is the binary version of the source code in change set 8263.Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.4.4: Fix for http://coding4fun.codeplex.com/workitem/6869 was incomplete. Back button wouldn't return app bar. Corrected now. High impact bugSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.0.528.279): Added keyboard shortcuts: - Cut (CTRL+X) - Copy (CTRL+C) - Paste (CTRL+V) - Delete (CTRL+D) - Move up (CTRL+UP ARROW) - Move down (CTRL+DOWN ARROW) Added ability to save/load SiteMap from/to a Xml file on disk Bug fix: - Connect to a server through the status bar was throwing error "Object Reference not set to an instance of an object" - Rename TreeNode.Name after changing TreeNode.TextMicrosoft - Domain Oriented N-Layered .NET 4.0 App Sample: V2.01 ALPHA N-Layered SampleApp .NET 4.0 and EF4.1: V2.0.01 - ALPHARequired Software (Microsoft Base Software needed for Development environment) Visual Studio 2010 RTM & .NET 4.0 RTM (Final Versions) Expression Blend 4 SQL Server 2008 R2 Express/Standard/Enterprise Unity Application Block 2.0 - Published May 5th 2010 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2D24F179-E0A6-49D7-89C4-5B67D939F91B&displaylang=en http://unity.codeplex.com/releases/view/31277 PEX & MOLES 0.94.51023.0, 29/Oct/2010 - Visual Studio 2010 Power ...Mosaic Project: Mosaic Alpha build 261: - Fixed crash when pinning applications in x64 OS - Added Hub to video widget. It shows videos from Video library (only .wmv and .avi). Can work slow if there are too much files. - Fixed some issues with scrolling - Fixed bug with html widgets - Fixed bug in Gmail widget - Added html today widget missed in previous release - Now Mosaic saves running widgets if you restarting from optionsEnhSim: EnhSim 2.4.9 BETA: 2.4.9 BETAThis release supports WoW patch 4.2 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in some of th....NET Reflector Add-Ins: Reflector V7 Add-Ins: All the add-ins compiled for Reflector V7TerrariViewer: TerrariViewer v4.1 [4.0 Bug Fixes]: Version 4.1 ChangelogChanged how users will Open Player files (This change makes it much easier) This allowed me to remove the "Current player file" labels that were present Changed file control icons Added submit bug button Various Bug Fixes Fixed crashes related to clicking on buffs before a character is loaded Fixed crashes related to selecting "No Buff" when choosing a new buff Fixed crashes related to clicking on a "Max" button on the buff tab before a character is loaded Cor...AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta8: ??AcDown???????????????，?????????????????????。????????????????????，??Acfun、Bilibili、???、???、?????，???????????、???????。 AcDown???????????????????????????，???，???????????????????。 AcDown???????C#??，?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ??v3.0 Beta8 ?? ??????????????? ???????????????(??????????) ???????...BlogEngine.NET: BlogEngine.NET 2.5: Get DotNetBlogEngine for 3 Months Free! Click Here for More Info 3 Months FREE – BlogEngine.NET Hosting – Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.5 instructions. To get started, be sure to check out our installatio...PHP Manager for IIS: PHP Manager 1.2 for IIS 7: This release contains all the functionality available in 62183 plus the following additions: Command Line Support via PowerShell - now it is possible to manage and script PHP installations on IIS by using Windows PowerShell. More information is available at Managing PHP installations with PHP Manager command line. Detection and alert when using local PHP handler - if a web site or a directory has a local copy of PHP handler mapping then the configuration changes made on upper configuration ...MiniTwitter: 1.71: MiniTwitter 1.71 ???? ?? OAuth ???????????? ????????、??????????????????? ???????????????????????SizeOnDisk: 1.0.10.0: Fix: issue 327: size format error when save settings Fix: some UI bindings trouble (sorting, refresh) Fix: user settings file deletion when corrupted Feature: TreeView virtualization (better speed with many folders) Feature: New file type DataGrid column Feature: In KByte view, show size of file < 1024B and > 0 with 3 decimal Feature: New language: Italian Task: Cleanup for speedRawr: Rawr 4.2.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...N2 CMS: 2.2: * Web platform installer support available ** Nuget support available What's newDinamico Templates (beta) - an MVC3 & Razor based template pack using the template-first! development paradigm Boilerplate CSS & HTML5 Advanced theming with css comipilation (concrete, dark, roadwork, terracotta) Template-first! development style Content, news, listing, slider, image sizes, search, sitemap, globalization, youtube, google map Display Tokens - replaces text tokens with rendered content (usag...KinectNUI: Jun 25 Alpha Release: Initial public version. No installer needed, just run the EXE.Terraria World Viewer: Version 1.5: Update June 24th Made compatible with the new tiles found in Terraria 1.0.5Kinect Earth Move: KinectEarthMove sample code: Sample code releasedThis is a sample code for Kinect for Windows SDK beta, which was demonstrated on Channel 9 Kinect for Windows SKD beta launch event on June 17 2011. Using color image and skeleton data from Kinect and user in front of Kinect can manipulate the earth between his/her hands.NetOffice - The easiest way to use Office in .NET: NetOffice Release 0.9b: Changes: - fix critical issue 262334 (AccessViolationException while using events in a COMAddin) - remove x64 Assemblies (not necessary) Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:..............................................................COM Proxy Management, Events, etc. - Examples in C# and VB.Net:............................................................Excel, Word, Outlook, PowerPoint, Access - COMAddi...patterns & practices: Project Silk: Project Silk Community Drop 12 - June 22, 2011: Changes from previous drop: Minor code changes. New "Introduction" chapter. New "Modularity" chapter. Updated "Architecture" chapter. Updated "Server-Side Implementation" chapter. Updated "Client Data Management and Caching" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To ins...New ProjectsA web interface for data search and download to CUAHSI HIS: Hydroweb is an innovative user interface (GUI) created for web driven hydrology data search and download from CUAHSI Hydrologic Information System (HIS). The project has been developed in c#/Silverlight programming environment by leveraging the Bing map Silverlight tools.AcesUp: It's a desktop game developed using Windows Forms. The Game can currently run only if the screen resolution is 1024 x 786. It's a modern implementation of the classic cards game Aces Up. The version that is currently available is called AcesUp Ultimate. Enjoy!AES Encryptor: AES Encryptor (AES.E) is an simple, user-friendly text file encryption program using the Advanced Encryption System (AES). Encryption keys are based on the password that is registered with the program. AES.E is written in Visual Basic.AML Studio: AML Studio makes it easier for developers who are extending Aras Innovator to develop AML queries. Queries can be developed and run using a smart editor with syntax highlighting, code folding, and Intellisense. It's developed in C#.Arca4: Arca4 is a chat server for the Ares Galaxy File Sharing Network. It's developed in C# 4.0.Basic SharePoint-Google-Maps-WebPart for SharePoint-Lists: This JavaScript-Solution improves the standard-functionality of SharePoint-Lists. It displays a new Menu-Link in the standard Menu-Toolbar of a SharePoint-List (which contains addresses / coordinates). By clicking this link Google-Maps will be displayed under the SharePoint-List.BikeBouncer, bike protection for all: Bike registration and protection for free! BikeBouncer helps cyclists keeping their bikes away from thieves. Website: http://bikebouncer.com. The source is now open so people can contribute with new ideas.Cli: General purpose commandline interface for c# projects. Inherit this class and get cli for free. Plan for other languages in the future.CLIRES-3 Clinical Study/Trial Research (MVC3 - Web Application) by Tateeda.com: Clinical Study/trials research application to track subjects and their medication, visits. Dynamically create questioners/survey forms, visits, manage medications, sites, visit schedules and so on. Application is pre loaded with forms for Bipolar disorder study and 2500 related medications. Full administrative functionality HIPPA and CFR part 11 implementation. Easy to adopt for any other type of clinical study research. Technology: MVC3, C3 4.0, EF 4.0, jQuery 1.6, MS SQL 2008 R2CloudShot: CloudShot is a simple application to create screenshots and automatically upload it to your dropbox.CodingWheels.DataTypes: DataTypes tries to make it easier for developers to have concrete typesafe objects for working with many common forms of data. Many times these data objects are just doubles or ints floating through your code with abbreviations on them describing what they represent.CommonLibrary.NET Extensions: Highly re-usable code and components that are extensions to CommonLibrary.NET.CommonLibrary.NET Web: Highly re-usable web based code and components that are extensions to the CommonLibrary.NET.CRM 2011 Maintenance Job Editor: This utility is to be used for editing the CRM 2011 maintenance jobs which are automatically scheduled by the installation of CRM. This utility provides similar functionality to CRM 4.0's Scale Group Job Editor [url:http://archive.msdn.microsoft.com/ScaleGroupJobEditor]. Due to the changes in CRM 2011 many modifications had to be made and the functionality has been altered slightly. I look forward to your thoughts and comments on the changes. Excel add-in for BLAS routines: summaryExcel add-in for floating point numbers: Excel add-in for floating point number routines and utilities.Excel add-in for LAPACK routines: LAPACKExcel add-in for market aware date and time routines.: Date and time functions for Excel that know about market conventions such as day count and roll conventions.F# Math Visualizer: MathVisualizer, scirtto in F#, permette di visualizzare espressioni matematiche. Le espressioni devo essere scritte dall'utente seguendo una determinata sintassi. In particolare un espressione puo' essere scritta in maniera estesa, contratta o ibrida.FSharp Toolkit: Contents for build applications on F#.HiFreamWork: Hi,FreamWork C# Custom Library Used Microsoft.Practices.EnterpriseLibrary. ruiyuxing MSN/Mail:ryx1984ryx#hotmail.com QQ:120897051 http://www.cnfield.comhozoroghiab: hozoroghiab is absent o present systemHtml Parametric Web Part: A Web Part to build html with parameters taken from the context of SharePoint 2007ios-framework: ios framework projectITextSharp Sample: ????IText Sharp????，????????PDF??，????flash,????LinGoRoom: Language lab technology-based "thin client". NAudio used for audio capture and playback. The project was developed in C #.Microsoft Dynamics CRM 2011 Customization Editor: Visual Studio 2010 and stand-alone tool that will allow the Customizations.xml to be viewed in a tree structure, with custom editors for each component. Initially editors for the supported Ribbon Editor, Sitemap and ISV.config will be included, with Read-only views for Forms.Modbus for .NET: C# implementation of Modbus communication protocol.Multi-Server MVC Elmah Log Viewer: An Elmah Log viewer for multiple elmah logs.MVC Scaffolding for WCF Data Services: This project contains a set of custom templates for MVC Scaffolding that will allow you to scaffold against a WCF Data Service (oData). Using these templates you can scaffold your client side DataServiceContext, Controller and Views using MVC Scaffolding, allowing you to quickly get a milti tiered MVC application up and running. You can use pretty much any oData feed as long as you have the entities for your ADO .NET Data Service defined in your solution these templates should work. OABValidate: This tool is for tracking down unresolvable DNs on directory objects when you have an Exchange server where Offline Address List generation (oabgen) is failing with event 9339 and error code 8004010e.onForms: Weekly fresh this is deletedOpenNETCF Calendar Controls: OpenNETCF Calendar Controls provide a Month View, Week View and Agenda View similar to what is used in the Pocket Outlook Calendar application. Pedal Architecture: Pedal Architecture allows you to quickly build enteprise applications. It currently supports building and hosting composable Windows Communication Foundation services using MEF.powerdown: ?????。rl: rlRooBooks: RooBooks - Books management tool for students and such. (circa 2004)SciFun: simple playground..SIGPRO Desktop: FUNCERNSistema De Tallet: Vehicles tallerSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor for Microsoft Dynamics CRM 2011 helps developer and customizers to configure the Site Map in a graphical way. You'll no longer have to create solution, add component, export, update Xml and reimport the solution to update the SiteMap.The Electrolytes Website: The Electrolytes Band WebsiteThe Professions: The Professions work items are generalised for professional use. The professions are for highly skilled professionals who have earned their place in society through education, dedication, and specialization in some cases. The associations for particular professions are encouragedUpdateTool: A tool used to update client This project is for personal use. Please do not download in now.WcfFront: Automatic publisher of WCF ServicesWolfpack.Contrib: Contrib project for WolfPack monitoring

  Read the article

• From Bluehost to WP Engine, My WordPress Story

  - by thatjeffsmith

  This is probably the longest blog post I’ve written in a LONG time. And if you’re used to coming here for the Oracle stuff, this post is not about that. It’s about my blog, and the stuff under the hood that makes it run, AKA WordPress. If you want to skip to the juicy stuff, then use these shortcuts: My Site Slowed Down How I Moved to WP Engine How WP Engine ‘Hooked’ Me Why WP Engine? I started thatJeffSmith.com on May 28th, 2010. I had been already been blogging for several years, but a couple of really smart people I respected (Andy, Brent – thanks again!) suggested that I take ownership of my content and begin building my personal brand. I thought that was a good idea, and so I signed up for service with bluehost. Bluehost makes setting up a WordPress site very, very easy. And, they continued to be easy to work with for the past 2 years. I would even recommend them to anyone looking to host their own WordPress install/site. For $83.40, I purchased a year’s worth of service and my domain name registration – a very good value. And then last year I paid $107.40 for another year’s services. And when that year expired I paid another $190.80 for an additional two year’s service in advance. I had been up to that point, getting my money’s worth. And then, just a few weeks ago… My Site Slowed to a Crawl That spike was from an April Fool's Day Post, I think Why? Well, when I first started blogging, I had the same problem that most beginner bloggers have – not many readers. In my first year of blogging, I think the highest number of readers on a single day was about 125. I remember that day as I was very excited to break 100! Bluehost was very reliable, serving up my content with maybe a total of 3-4 outages in the past 2 years. Support was usually very prompt with answers and solutions, and I love their ‘Chat now’ technology – much nicer than message boards only or pay-to-talk phone support. In the past 6 months however, I noticed a couple of things: daily traffic was increasing – woohoo! my service was experiencing severe CPU throttling – doh! To be honest, I wasn’t aware the throttling was occuring, but I did know that the response time of my blog was starting to lag. Average load times were approaching 20-30 seconds. Not good when good sites are loading in 5 seconds or less. And just this past week, in getting ready to launch a new website for work that sucked in an RSS feed from my blog, the new page was left waiting for more than a minute. Not good! In fact my boss asked, why aren’t you blogging on Blogger? Ugh. I tried a few things to fix the problem: I paid for a premium WordPress theme – Themify’s Grido (thanks to @SQLRockstar for the heads-up) I installed a couple of WP caching plugins I read every WP optimization blog post I could get my greedy little eyes on However, at the same time I was also getting addicted to WordPress bloggers talking about all the cool things you could do with your blog. As a result I had at one point about 30 different plugins installed. WordPress runs on MySQL, and certain queries running via these plugins were starving for CPU. Plugins that would be called every page load meant that as more people clicked on my site, the more CPU I needed. I’m not stupid, so I eventually figured out that maybe less plugins was better, and was able to go down to just 20. But still, the site was running like a dog. CPU Throttling, makes MySQL wait to run a query Bluehost runs shared servers. Your site runs on the same box that several hundred (or thousand?) other services are running on. If you take more CPU than they think you should have, they will limit your service by making you stand in line for CPU, AKA ‘throttling.’ This is not bad. This business model allows them to serve many, many users for a very fair price. It works great until, well, until it doesn’t. I noticed in the last week that for every minute of service, I was being throttled between 60 and 300 seconds. If there were 5 MySQL processes running, then every single one of them were being held in check. The blog visitor notice this as their page requests would take a minute or more to be answered. Bluehost unfortunately doesn’t offer dedicated server hosting, so there was no real upgrade path for me follow and remain one of their customers. So what was I to do? Uninstall every plugin and hope the site sped up? Ask for people to take turns on my blog? I decided to spend my way out of the problem. I signed up for service with WP Engine and moved ThatJeffSmith.com The first 2 months are free, and after that it’s about $29/month to run my site on their system. My math tells me that’s a good bit more expensive than what Bluehost was charging me – to the tune of about 300% more a month. Oh, and I should just say that my blog is a personal blog even though I talk about work stuff here. I don’t get paid for blogging, I don’t sell ads, and I don’t expense the service fees – this is my personal passion. So is it worth it? In the first 4 days, it seems to be totally worth it. Load times have gone from 20-30 seconds to less than 5 seconds. A few folks have told me via Twitter that they notice faster page loads. I anticipate this will indirectly lead to more traffic as Google penalizes you in search results if your site is too slow, and of course some folks won’t even bother waiting more than 5-10 seconds. I noticed right away that writing posts, uploading pictures, and just using the WordPress dashboard in general was much more responsive. So writing is less of a chore now, which means I won’t have a good reason not to write How I Moved to WP Engine I signed up for the service and registered my domain. I then took a full export of my ‘old’ site by doing a FTP GET of all my files, then did a MySQL database backup, exported my WordPress Theme settings to a .zip file, and then finally used the WordPress ‘Export’ feature. I then used the WordPress ‘Import’ on the new site to load up my posts. Then I uploaded the theme .zip package from Themify. Then I FTP’d the ‘wp-content’ directory up to my new server using SFTP (WP Engine only supports secure FTP – good on them!) Using a temporary URL to see my new site, I was able to confirm that everything looked mostly OK – I’ll detail the challenges and issues of fixing the content next – but then it was time to ‘flip the switch.’ I updated the IP address that the DNS lookup tables use to route traffic to my new server. In a matter of minutes the DNS servers around the world were updated and it was time to see the new site! But It Was ‘Broken’ I had never moved a website before, and in my rush to update the DNS, I had changed the records without really finding out what I was supposed to do first. After re-reading the directions provided by WP Engine and following the guidance of their support engineer, I realized I had needed to set the CNAME (Alias) ‘www’ record to point to a different URL than the ‘www.thatjeffsmith.com’ entry I had set. Once corrected the site was up and running in less than a minute. Then It Was Only Mostly Broken Many of my plugins weren’t working. Apparently just ftp’ing the wp-content directory up wasn’t the proper way to re-install the plugin. I suspect file permissions or file ownership wasn’t proper. Some plug-ins were working, many had their settings wiped to the defaults, and a few just didn’t work again. I had to delete the directory of the plug-in manually via SFTP, and then use the WP Dashboard to install it from scratch. And here was my first ‘lesson’ – don’t switch the DNS records until you’ve completely tested your new site. I wasn’t able to navigate the old WP console to review my plug-in settings. Thankfully I was able to use the Wayback Machine to reverse engineer some things, and of course most plug-ins aren’t that complicated to setup to begin with. An example of one that I had to redo from scratch is the ‘Twitter @Anywhere Plus’ plugin that I use to create the form that allows folks to tweet a post they enjoyed at the end of each story. How WP Engine ‘Hooked’ Me I actually signed up with another provider first. They ranked highly in Google searches and a few Tweeps recommended them to me. But hours after signing up and I still didn’t have sever reyady, I was ready to give up on them. They offered no chat or phone support – only mail and message boards. And the message boards were rife with posts about how the service had gone downhill in the past 6 months. To their credit, they did make it easy to cancel, although I did have to do so via email as their website ‘cancel’ button was non-existent. Within minutes of activating my WP Engine account I had received my welcome message and directions on how to get started. I was able to see my staged website right away. They also did something very cool before I even got started – they looked at my existing site and told me by how much they could improve its performance. The proof is in the web pudding. I like this for a few reasons, but primarily I liked their business model. It told me they knew what they were doing, and that they were willing to put their money where their mouth was. This was further evident by their 60-day money back guarantee. And if I understand it correctly, they don’t even take your money until after that 60 day period is over. After a day, I was welcomed by the WP Engine social media team, and was given the opportunity to subscribe to their newsletter and follow their account on Twitter. I noticed their Twitter team is sure to post regular WordPress tips several times a day. It’s not just an account that’s setup for the sake of having a Twitter presence. These little things add up and give me confidence in my decision to choose them as my hosting partner. ‘Partner’ – that’s a lot nicer word than just ‘service provider,’ isn’t it? Oh, and they offered me a t-shirt. Don’t ever doubt the power of a ‘free’ t-shirt! How awesome is this e-mail, from a customer perspective? I wasn’t really expecting any of this. Exceeding expectations before I have even handed over a single dollar seems like a pretty good business plan. This is how you treat customers. Love them to death, and they reward you with loyalty. But Jeff, You Skipped a Piece Here, Why WP Engine? I found them on one of those ‘Top 10′ list posts, and pulled up their webpage. I noticed they offered a specialized service – they host WordPress installs, and that’s it. Their servers are tuned specifically for running WordPress. They had in bolded text, things like ‘INSANELY FAST. INFINITELY SCALABLE.’ and ‘LIGHTNING SPEED.’ And then they offered insurance against hackers and they took care of automatic backups and restores. The only drawbacks I have noticed so far relate to plugins I used that have been ‘blacklisted.’ In order to guarantee that ‘lightning’ speed, they have banned the use of the CPU-suckiest plugins. One of those is the ‘Related Posts’ plugin. So if you are a subscriber and are reading this in your email, you’ll notice there’s no links back to my blog to continue reading other related stories. Since that referral traffic is very small single-digit for my site, I decided that I’m OK with that. I’d rather have the warp-speed page loads. Again, I think that will lead to higher traffic down the road. In 50+ days I will need to decide if WP Engine is a permanent solution. I’ll be sure to update this post when that time comes and let y’all know how it turns out.

  Read the article

• CodePlex Daily Summary for Wednesday, November 21, 2012

  CodePlex Daily Summary for Wednesday, November 21, 2012Popular ReleasesImapX 2: ImapX 2.0.0.6: An updated release of the ImapX 2 library, containing many bugfixes for both, the library and the sample application.Metodología General Ajustada - MGA: 03.05.05: Cambios John: Se modificó el Procedimiento Alamacenado PROF03ObjetivoProductoConsultarIdF03 que no incluía los campos de IdUnidadMedida y UnidadMedida, lo que generaba error en la capa de datos al leer estos campos (PasarDataSetAPROF03ObjetivoProductoInfo) y terminaba devolviendo NULL en los registros, esto no dejaba la información en la Exportación y por ende en la Importación no subían los Productos. Generación de instaladores. Soporte técnico por correo electrónico, telefónico y en sitio.WiX Toolset: WiX v3.7 RC: WiX v3.7 RC (3.7.1119.0) provides feature complete Bundle update and reference tracking plus several bug fixes. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/11/20/WiX-v3.7-Release-Candidate-availablePicturethrill: Version 2.11.20.0: Fixed up Bing image provider on Windows 8Excel AddIn to reset the last worksheet cell: XSFormatCleaner.xla: Modified the commandbar code to use CommandBar IDs instead of English names.Json.NET: Json.NET 4.5 Release 11: New feature - Added ITraceWriter, MemoryTraceWriter, DiagnosticsTraceWriter New feature - Added StringEscapeHandling with options to escape HTML and non-ASCII characters New feature - Added non-generic JToken.ToObject methods New feature - Deserialize ISet<T> properties as HashSet<T> New feature - Added implicit conversions for Uri, TimeSpan, Guid New feature - Missing byte, char, Guid, TimeSpan and Uri explicit conversion operators added to JToken New feature - Special case...EntitiesToDTOs - Entity Framework DTO Generator: EntitiesToDTOs.v3.0: DTOs and Assemblers can be generated inside project folders! Choose the types you want to generate! Support for Visual Studio 2012 !!! Support for new Entity Framework EDMX (format used by VS2012) ! Support for Enum Types! Optional automatic check for updates! Added the following methods to Assemblers! IEnumerable<DTO>.ToEntities() : ICollection<Entity> IEnumerable<Entity>.ToDTOs() : ICollection<DTO> Indicate class identifier for DTOs and Assemblers! Cleaner Assemblers code....mojoPortal: 2.3.9.4: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2394-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...VidCoder: 1.4.6 Beta: Brought back the x264 advanced options panel due to popular demand. Thank you for all the feedback. x264 Preset/Profile/Tune/Level has been moved back to the Video tab, along with a copy of the "extra options" string. Added Fast Decode and Zero Latency checkboxes to support multiple Tunes. Added cropping option "None". Audio bitrates that are incompatible with the encoder (such as MP3 > 320 kbps) are no longer preset on the list. Fixed crash on opening VidCoder after de-selecting "re...DotNetNuke® Store: 03.01.07: What's New in this release? IMPORTANT: this version requires DotNetNuke 04.06.02 or higher! DO NOT REPORT BUGS HERE IN THE ISSUE TRACKER, INSTEAD USE THE DotNetNuke Store Forum! Bugs corrected: - Replaced some hard coded references to the default address provider classes by the corresponding interfaces to allow the creation of another address provider with a different name. New Features: - Added the 'pickup' delivery option at checkout. - Added the 'no delivery' option in the Store Admin ...Bundle Transformer - a modular extension for ASP.NET Web Optimization Framework: Bundle Transformer 1.6.10: Version: 1.6.10 Published: 11/18/2012 Now almost all of the Bundle Transformer's assemblies is signed (except BundleTransformer.Yui.dll); In BundleTransformer.SassAndScss the SassAndCoffee.Ruby library was replaced by my own implementation of the Sass- and SCSS-compiler (based on code of the SassAndCoffee.Ruby library version 2.0.2.0); In BundleTransformer.CoffeeScript added support of CoffeeScript version 1.4.0-3; In BundleTransformer.TypeScript added support of TypeScript version 0....ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.0: +2012-11-18 v3.2.0 -?????????????????SelectedValueArray????????（◇?◆:）。 -???????????????????RecoverPropertiesFromJObject????（〓?〓、????、??、Vian_Pan）。 -????????????，?????????????，???SelectedValueArray???????（sam.chang）。 -??Alert.Show???????????（swtseaman）。 -???????????????，??Icon??IconUrl????（swtseaman）。 -?????????TimePicker（??）。 -?????????，??/res.axd?css=blue.css&v=1。 -????????，?????????????，???????。 -????MenuCheckBox（???????）。 -?RadioButton??AutoPostBack??。 -???????FCKEditor?????????...BugNET Issue Tracker: BugNET 1.2: Please read our release notes for BugNET 1.2: http://blog.bugnetproject.com/bugnet-1-2-has-been-released Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Paint.NET PSD Plugin: 2.2.0: Changes: Layer group visibility is now applied to all layers within the group. This greatly improves the visual fidelity of complex PSD files that have hidden layer groups. Layer group names are prefixed so that users can get an indication of the layer group hierarchy. (Paint.NET has a flat list of layers, so the hierarchy is flattened out on load.) The progress bar now reports status when saving PSD files, instead of showing an indeterminate rolling bar. Performance improvement of 1...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1116.7): [IMPROVED] Detailed error message descriptions for FaultException [FIX] Fixed bug in rule CrmOfflineAccessStateRule which had incorrect State attribute name [FIX] Fixed bug in rule EntityPropertyRule which was missing PropertyValue attribute [FIX] Current connection information was not displayed in status bar while refreshing list of entitiesSuper Metroid Randomizer: Super Metroid Randomizer v5: v5 -Added command line functionality for automation purposes. -Implented Krankdud's change to randomize the Etecoon's item. NOTE: this version will not accept seeds from a previous version. The seed format has changed by necessity. v4 -Started putting version numbers at the top of the form. -Added a warning when suitless Maridia is required in a parsed seed. v3 -Changed seed to only generate filename-legal characters. Using old seeds will still work exactly the same. -Files can now be saved...Caliburn Micro: WPF, Silverlight, WP7 and WinRT/Metro made easy.: Caliburn.Micro v1.4: Changes This version includes many bug fixes across all platforms, improvements to nuget support and...the biggest news of all...full support for both WinRT and WP8. Download Contents Debug and Release Assemblies Samples Readme.txt License.txt Packages Available on Nuget Caliburn.Micro – The full framework compiled into an assembly. Caliburn.Micro.Start - Includes Caliburn.Micro plus a starting bootstrapper, view model and view. Caliburn.Micro.Container – The Caliburn.Micro invers...DirectX Tool Kit: November 15, 2012: November 15, 2012 Added support for WIC2 when available on Windows 8 and Windows 7 with KB 2670838 Cleaned up warning level 4 warningsDotNetNuke® Community Edition CMS: 06.02.05: Major Highlights Updated the system so that it supports nested folders in the App_Code folder Updated the Global Error Handling so that when errors within the global.asax handler happen, they are caught and shown in a page displaying the original HTTP error code Fixed issue that stopped users from specifying Link URLs that open on a new window Security FixesFixed issue in the Member Directory module that could show members to non authenticated users Fixed issue in the Lists modul...fastJSON: v2.0.10: - added MonoDroid projectNew Projects1121codeplex01: Today's task is to test portal on JapaneseAgileToDo: a to do list use wpf ef sqlce!Applay: Applay is a library that allows you to wrap authorization and validation around the services of your application layer by using a dynamic proxy.ArunimaErp: Enterprise Resource Planning Software for Arunima GroupBootCMS: BootCMS makes webdevelopment easy.codeplex01: I need go out for a whileCoding4Fun's Maelstrom: Introduced at //build/ 2012, Maelstrom is Coding4Fun's latest creation. Step up to the podium and battle against your opponent in full-on stereoscopic 3D!CTCS Project 2012: 11/21/2012 @ svn repository ctodo: TODO List Management Librarydeploy-with-ease: One-click deployment tool based on DrobBox files hostingDesign Resources .NET: D-R.NET is a set of pre-built implementations of oft-recurring application designs. D-R.NET saves considerable time and money in building user-focused applications: from basic to complex. DnfWeb: dnf??Dr.Peng: dr.peng ????????。DriveKeepAlive: Managed .NET service intended to keep external hard drives "awake" for immediate access. Developed in C# with Visual Studio 2008Ecommerce Platform: Ecommerce PlatformEventManagerReset: Project created for Reset meetings.FaceComparerDistributed: project of face compare distributed versionFileSystemExplorerExample: WPF MVVM Sample applicationFinlogiK ReSharper Contrib: FinlogiK ReSharper Contrib is a plugin for ReSharper 5.1 which adds code cleanup and inspection options for static qualifiers.Gestione Lampade Votive: Gestione dei canoni annuali dei loculi cimiteriali, con stampa di comunicazioni ai contribuenti e dei bollettini di conto corrente postale (a due o tre cedole).GI_PII: HABA BABA?GIV_P2: second projectHex o'clock: Projekt kolorowego zegara.IISProcessScheduler: Schedule processes from within IIS.Image Tagger & Resizer: Resize, and text in the lower right of picture with i.e. copyright information.IT Kohvik: ITK cafe school project.jean1121codeplex01: goodKooboo3 Helper: It's a developer tutorial code for kooboo cms v3. http://kooboo.codeplex.comMAVI: mobile application for the visually impaired: bill recognition & tag and recognize objects based on a specific stickerMecanismos de Segurança Interoperáveis para Serviços Web: Esse projeto pretende desenvolver um framework que forneça requisitos de segurança de forma interoperável através de Serviços Web. Metro UI For Windows Forms: Provides a set of controls and form templates for designing user interfaces based on a similar minimalist metro style. For those who love Windows Forms.NHSmartBootstrapper: In a "fast-changing" world, your LoB application needs to be ready to change as well. The usage of NHibernate Listeners together with smart application bootstrapping, even in a complex scenario, can lead to extensible and new-feature-ready applications. Office Add-In Monitor: Office Add-in Monitor protects add-ins from being disabled.Orchard Responsive Theme Machine: A responsive version of the Orchard CMS "Theme Machine" which is commonly used as a starting point for building custom themes. Supports many resolutions.Orchard Simple Contact Form: An Orchard CMS module that provides a simple contact form that sends an email. It can be used as either a content part or widget.Peon War: Peon war is a game where peons are fighting.Project Files Linker (VS Add-In): PFL project is used to generate multiple projects with links to the same files to achieve projects for different .NET FW versions.Quibbler - Universal News Reader: Quibbler is a product designed and developed by Indigo Architects. Quibbler is a desktop application which runs on user's machine and provides a intuitive user interface for reading news in offline mode. Quibbler is developed in WPF (.Net 3.5).Samcrypt: .SenchaTest: SenchaTestShared Genomics Project - Workbench Codebase: The Shared Genomics workbench enables a diverse user group of researchers to explore the associations between genetic and other factors in their datasets. It provides a graphical user interface to the analysis functions published in a sister Codeplex project i.e. MPI Codebase.SharePoint 2013 FBA Pack: This is the home of the SharePoint 2013 FBA Pack. The FBA Pack for SharePoint 2013 is currently in development and is coming soon.SharePoint Term Store PowerShell Backup & Restore Scripts: This project is focused on development of PowerShell script tools for backup and restore of SharePoint Managed Metadata service application Term Store taxonomy.SharpPlanets: A simple game completely designed and written in C#, inspired by JPlanets.SpaceShooter: A small hobbyist game. It is similar to the 2D Arcade shooter games.Stretched Background Image jQuery plugin: jQuery plugin for adding a stretched background image for any element in a web page. Uses an absolutely positioned image at z-index -1.Stsadm Templates for Visual Studio: The Stsadm Templates for Visual Studio 2005 and 2008 support you in making command extensions for SharePoint's commnand line tool stsadm.exe.SwissPost EasyTrack API: The SwissPost EasyTrack API allows you to track your parcels or letters everytime and in every application.System.Threading.Joins: The Joins project provides asynchronous concurrency semantics based on join calculus and modeled after the Microsoft Research C? (C Omega) project.T nagu Tetris: Meie versioon tuntud mängust tetris.testdd11202012tfs01: juktestddhg11202012hg01: stesttom11202012git02: fdsfdstesttom11202012hg01: gfdTetrissimus: Tetrissimus is an open source "Tetris" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses keyboard. This cross-platform and cross-browser game was tested under BeOS, Linux, NetBSD, OpenBSD, FreeBSD, Windows and others.Thrift Client .NET for WinRT (Windows Store Apps): thrift .net client for WinRT applicationTwitter Bootstrap for SharePoint: A Masterpage for SharePoint 2010 including the twitter bootstrap front-end frameworkTX Spell .NET ActiveX Package: TX Spell .NET ActiveX Package enables you to add high-performance spell checking capabilities to your VB6 applications.USB ACCELEROMETER: This project is a test demo for usb accelerometer. Application plays music (mp3 file) while usb acc gives high values from its coordinate between interval.VfaAccoutApps: Cash Payment Application of Vf AsiaVisualPoint Use PowerPoint inside Visual Studio: VisualPoint lets you show PowerPoint presentations from inside Visual Studio. Future release will automate walkthroughs and presentations.VS2010 Rc1 Fix: Illustrates a fix for working with the ASAP.NET Wizard control with VS2010 RC1WebSite.Request: WebSite.Request launch web request (via XMLHTTP) on website. Use, for example, to make initial request to sharepoint URL and escape "slow first request" problem.WPF Checked ListBox: This is simple implementation of WPF Checked ListBoxWPortal: doing nothing. that's it. i just want to use the subversion management. XNA Capture the Flag for the Microsoft Zune: Capture the Flag is a 2d Capture the flag game made for the Zune platform using XNA 3.0 CTP. Players choose to join or start a network session in the main menu. When in game, the player uses left or right on the DPad to choose the team on which to play with. Once sides have been chosen the party leader presses the center button on the Dpad to start the game. Teams switch between offense and defense for a total of 4 rounds in each game. When the game is over the party leader simply presses th...XPS Indexer: Xps file indexing for Google Desktop

  Read the article

• CodePlex Daily Summary for Friday, March 23, 2012

  CodePlex Daily Summary for Friday, March 23, 2012Popular ReleasesSSIS Multiple Hash: Multiple Hash V1.4.1: This is a feature release. It adds the ability to select multiple rows, and change the selection of these with a single click in the check box. All lists with check boxes have this ability. It is backwards compatible with previous versions. Please ensure that you select the appropriate download file based on the version of SQL Server that you will be using. If you have used the Denali installer from V1.4 for packages that you wish to now use the SQL 2012 release version, then you MUST ma...SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 14: 1. improved accuracy of logic fault checking in analysisMetodología General Ajustada - MGA: 02.02.02: Cambios John: Cambios en los cálculos del Flujo de Caja, Flujo Económico y Resumen EF y ES. Se visualiza el reporte de Resumen EF y ES en Grilla. Se ajustan formularios de llamado. Cambios Parmenio: Cambios en el formularios de Programaciòn.MapWindow 6 Desktop GIS: MapWindow 6.1.1: MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial templateDotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Telerik CAB Enabling Kit for RadControls for WinForms: TCEK 2012.1.321.20: major update, new Workspaces and UIAdapters Workspaces: - RadDockWorkspace - RadPageViewWorkspace - RadFormWorkspace - RadFormMdiWorkspace - RadTabbedMdiWorkspace UI Adapters: - RadCommandBarUIAdapter - RadRibbonBarUIAdapter - RadTreeNodeUiAdapter - RadTreeViewUIAdapter - RadItemCollectionUIAdapter - (RadMenu, RadStatusStrip, all controls that support RadItem collections)Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...Speed up Printer migration using PrintBrm and it's configuration files: BRMC.EXE: Run the tool from the extracted directory of the printbrm backup. You can use the following command to extract a backup file to a directory - PRINTBRM.EXE -R -D C:\TEMP\EXPAND -F C:\TEMP\PRINTERBACKUP.PRINTEREXPORTAppBarUtils for Windows Phone SDK 7.1: AppBarUtils 1.2: This release contains IconUri dependency property for both AppBarItemCommand and AppBarItemTrigger as requested by shawnoster at http://appbarutils.codeplex.com/discussions/321745. When using this IconUri dependency property, please be sure to set the Type property to AppBarItemType.Button or just omit this property entirely, because it is only for app bar icon button. The demo has been updated to show how to use this new IconUri dependency property with a new lock button on the app bar. Wh...Offline Navigation for Windows Phone 7: 0.1 Alpha: This is the 0.1 alpha release of source code.SmartNet: V1.0.0.0: DY SmartNet ?????? V1.0New Projects2Sexy Content for DotNetNuke - great looking and animated content: 2Sexy Content is a DotNetNuke Extension to create attractive and designed content. It solves the common problem, allowing the web designer to create designed templates for different content elements, so that the user must only fill in fields and receive a perfectly designed and animated output. AgileMapper: AgileMapper????????????????????，?????????dto?do???????AksiMata: Berita terbaru dan peristiwa terkini di sekitar Anda... Langsung dari TKP!Caprice: Engineering adaptive privacy: Caprice is a tool aimed at supporting software engineers in the design of applications that appropriately adapt their behaviour to mitigate privacy threats. This tool helps provide software engineers design-time insight on the functional behaviour a system and associated runtime context changes that can threaten privacy.Change default Share-site group SharePoint Online (Office 365): As default when we share a site collection or site with external users, SharePoint Online show default SharePoint groups which are Visitors and Members. By using this feature, you will get a link which you can use to customize the default groups to your custom groups and other default groups. CodePlex Test Project: This is just to test how well CodePlex handles Git.Find Work Items For Source Items (Visual Studio Extension): work4source is a Visual Studio 2010 tool window which finds and lists all TFS work items associated with a specific source control file or folder, avoiding the need to view the details for every changeset. It also includes "versioned item" links which otherwise cannot be found from the source side of the link using Visual Studio. To install run the VSIX package, restart Visual Studio, then select View --> Other Windows --> "Find Work Items for Source Items" and either leave the window ...FSProject: FSProjectGit c9 Test: testing git to c9 integration possibilitiesImage 3D Viewer: A Image 3D Viewer with WPF.Jakarta Guide: Jakarta news featuring up-to-date information on attractions, hotels, restaurants, nightlife, travel tips and more.LinqLucene: Due to the fact to the original LinqToLucene project seems to have died, I have created this new project to carry on it's workLuskyCode: Just some codemaouidatest: testMarktplace: NLocalize MarketplaceMemoryLifter: MemoryLifter - the fastest way to memorize * is a virtual flashcard system, scientifically based on the Leitner card box algorithm * enables the user to lift any kind of information into long term memory * maximizes study efficiency with automation, controlled repetitionMemoryTributary - A replacement for MemoryStream: MemoryTributary is a replacement for MemoryStream that uses multiple memory chunks as its backing store, as opposed to the single byte array used by MemoryStream. The result is it can handle much larger streams and the initial allocations are more efficient. It's developed in C#.my career muse: Project configured for simultaneous use with other developersMyMusicBox: Mini-Projet MBDS Web 2.0 Michel BuffaNucleo.NET ORM: These components provide a unit of work interface that works with LINQ to SQL, Entity Framework, and Entity Framework Code First, with more ORMs to come. The idea is to create one common wrapper and base framework to make it easier to work with the various ORM products.Orchard QnA: A lightweight discussions module for the Orchard CMS.Orchard Shoutbox: A lightweight shoutbox module for the Orchard CMS:PAIN: My projects from PAIN labs, semester 2012L, department of electronics of Warsaw University of Technology.Reactifier: This project is for the windows 8 Shoutcast MediaStreamSource: Shoutcast MediaStreamSource is a MediaStreamSource implementation of the Shoutcast protocol for Silverlight. This MediaStreamSource allows both Silverlight 4+ OOB and Windows Phone 7 applications to consume a Shoutcast stream using a MediaElement. Currently, Mp3 and AAC+ Shoutcast streams are supported on Windows Phone. However, ONLY Mp3 is supported on Desktop Silverlight. There is also limited (i.e. somewhat untested) M3u and PLS playlist support. Please report any issues playing...Simple Task Manager: Politechnika Wroclawska Team Project - 2012SkyGo Media Commander: SkyGo Media Commander permette di usare le frecce della tastiera per cambiare canale e il tasto invio per aprire il menu : "Telecomando". Utile se si usa un telecomando. Perfettamente funzionante con il telecomando CIR del notebook HP DV6 2137el.sunshine Design: sunshinetesting: testing projecttesttom032012git01: testtom032012git01testtom03222012hg01: testtom03222012hg01testtom03222012tfs01: testtom03222012tfs01testtom03222012tfs02: testtom03222012tfs02TileSet Map Editor: a small side project of a tileset map editorTraffic Light Simulation Application: Traffic Light Simulation application simulates traffic on a 2D plane under different traffic light control schemes. The interface will display a 10x10 grid where each street allows one-way traffic and there is one traffic light at each intersection.Type08ScreenCapture: Type08ScreenCapture brings Windows 8-like desktop capture function to Windows 7. If you type [Windows]+[PrintScreen], it capture a main display area and save the bitmap to your picture folder. It's developed in C#/WPF.WikiPlex – a Regex Wiki Engine: A regular expression based wiki engine allowing developers to integrate a wiki experience into an existing .NET applicationWindowsQR: Windows QR is a proof of concept about capturing a qr code using a webcam in a WPF application runinng in a desktop computer with Windows 7 or similars. It uses AForge.Vision to wrap the DirectShow complexity and zxing library to decode the qr code.Working with Social Data: 1)Customizing Tag Cloud By Accountname 2)RatingWPF 3D-Model Viewer: WPF 3D-Model Viewer

  Read the article

• CodePlex Daily Summary for Sunday, March 13, 2011

  CodePlex Daily Summary for Sunday, March 13, 2011Popular ReleasesImage.Viewer: 2011.2: Whats new for Image.Viewer 2011.2: New open from file New about dialog Minor Bug Fix's, improvements and speed upsIronPython: 2.7: On behalf of the IronPython team, I'm very pleased to announce the release of IronPython 2.7. This release contains all of the language features of Python 2.7, as well as several previously missing modules and numerous bug fixes. IronPython 2.7 also includes built-in Visual Studio support through IronPython Tools for Visual Studio. IronPython 2.7 requires .NET 4.0 or Silverlight 4. To download IronPython 2.7, visit http://ironpython.codeplex.com/releases/view/54498. Any bugs should be report...XML Explorer: XML Explorer 4.0.2: Changes in 4.0: This release is built on the Microsoft .NET Framework 4 Client Profile. Changed XSD validation to use the schema specified by the XML documents. Added a VS style Error List, double-clicking an error takes you to the offending node. XPathNavigator schema validation finally gives SourceObject (was fixed in .NET 4). Added Namespaces window and better support for XPath expressions in documents with a default namespace. Added ExpandAll and CollapseAll toolbar buttons (in a...Mobile Device Detection and Redirection: 1.0.0.0: Stable Release 51 Degrees.mobi Foundation has been in beta for some time now and has been used on thousands of websites worldwide. We’re now highly confident in the product and have designated this release as stable. We recommend all users update to this version. New Capabilities MappingsTo improve compatibility with other libraries some new .NET capabilities are now populated with wurfl data: “maximumRenderedPageSize” populated with “max_deck_size” “rendersBreaksAfterWmlAnchor” populated ...Composite C1 CMS: Composite C1 2.1 (2.1.4087.22991): Composite C1 is a fully featured pro open source CMS for quick/custom website creation. Modern architecture, very user friendly. Use wizards or HTML/CSS/XSLT/ASP.NET/LINQ/.NET4ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.3: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager added interactive search for the lookupWPF Inspector: WPF Inspector 0.9.7: New Features in Version 0.9.7 - Support for .NET 3.5 and 4.0 - Multi-inspection of the same process - Property-Filtering for multiple keywords e.g. "Height Width" - Smart Element Selection - Select Controls by clicking CTRL, - Select Template-Parts by clicking CTRL+SHIFT - Possibility to hide the element adorner (over the context menu on the visual tree) - Many bugfixes??????????: All-In-One Code Framework ??? 2011-03-10: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ??，????。??????????All-In-One Code Framework ???，??20?Sample！！????，?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ASP.NET ??： CSASPNETBingMaps VBASPNETRemoteUploadAndDownload CS/VBASPNETSerializeJsonString CSASPNETIPtoLocation CSASPNETExcelLikeGridView ....... Winform??： FTPDownload FTPUpload MultiThreadedWebDownloader...Rawr: Rawr 4.1.0: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a Release of the WPF version, most of the general issues have been resolved. If you have a problem, please follow the Posting Guidelines and put it into the Issue Tracker. Whe...PHP Manager for IIS: PHP Manager 1.1.2 for IIS 7: This is a localization release of PHP Manager for IIS 7. It contains all the functionality available in 56962 plus a few bug fixes (see change list for more details). Most importantly this release is translated into five languages: German - the translation is provided by Christian Graefe Dutch - the translation is provided by Harrie Verveer Turkish - the translation is provided by Yusuf Oztürk Japanese - the translation is provided by Kenichi Wakasa Russian - the translation is provid...TweetSharp: TweetSharp v2.0.0: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Beta ChangesAdded user streams support Serialization is not attempted for Twitter 5xx errors Fixes based on feedback Third Party Library VersionsHammock v1.2.0: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comDirectQ: Release 1.8.7 (RC2): More fixes and improvements. Note for multiplayer - you may need to set r_waterwarp to 0 or 2 before connecting to a server, otherwise you will get a "Mod_PointInLeaf: bad model" error and not be able to connect. You can set it back to 1 after you connect, of course. This only came to light after releasing, and will be fixed in the next one.Microsoft All-In-One Code Framework - a centralized code sample library: Visual Studio 2008 Code Samples 2011-03-09: Code samples for Visual Studio 2008Office Web.UI: Version 2.4: After having lost all modifications done for 2.3. I finally did it again... Have a look at http://www.officewebui.com/change-log Also, the documentation continues to grow... http://www.officewebui.com/category/kb ThanksmyCollections: Version 1.3: New in version 1.3 : Added Editor management for Books Added Amazon API for Books Us, Fr, De Added Amazon Us, Fr, De for Movies Added The MovieDB for Fr and De Added Author for Books Added Editor and Platform for Games Added Amazon Us, De for Games Added Studio for XXX Added Background for XXX Bug fixing with Softonic API Bug fixing with IMDB UI improvement Removed GraceNote Added Amazon Us,Fr, De for Series Added TVDB Fr and De for Series Added Tracks for Musi...patterns & practices : Composite Services: Composite Services Guidance - CTP2: Overview The Composite Services guidance (codename Reykjavik) provides best practices and capabilities for applying industry-known SOA design patterns when building robust, connected, service-oriented composite enterprise applications. These capabilities are implemented as a set of reusable components for analytic tracing, service virtualization, metadata centralization and versioning, and policy centralization as well as exception management, included in this release. Changes in this CTP ...Python Tools for Visual Studio: 1.0 Beta 1: Beta 1You can't install IronPython Tools for Visual Studio side-by-side with Python Tools for Visual Studio. A race condition sometimes causes local MPI debugging to miss breakpoints. When MPI jobs on a cluster fail they don’t get cleaned up correctly, which can cause debugging to stall because the associated MPI job is stuck in the queue. The "Threads" view has a race condition which can cause it not to display properly at times. VS2010 shortcuts that are pinned to the taskbar are so...DotNetAge -a lightweight Mvc jQuery CMS: DotNetAge 2: What is new in DotNetAge 2.0 ? Completely update DJME to DJME2, enhance user experience ,more beautiful and more interactively visit DJME project home to lean more about DJME http://www.dotnetage.com/sites/home/djme.html A new widget engine has came! Faster and easiler. Runtime performance enhanced. SEO enhanced. UI Designer enhanced. A new web resources explorer. Page manager enhanced. BlogML supports added that allows you import/export your blog data to/from dotnetage publishi...Kooboo CMS: Kooboo CMS 3.0 Beta: Files in this downloadkooboo_CMS.zip: The kooboo application files Content_DBProvider.zip: Additional content database implementation of MSSQL,SQLCE, RavenDB and MongoDB. Default is XML based database. To use them, copy the related dlls into web root bin folder and remove old content provider dlls. Content provider has the name like "Kooboo.CMS.Content.Persistence.SQLServer.dll" View_Engines.zip: Supports of Razor, webform and NVelocity view engine. Copy the dlls into web root bin folder t...LINQ to Twitter: LINQ to Twitter Beta v2.0.20: Mono 2.8, Silverlight, OAuth, 100% Twitter API coverage, streaming, extensibility via Raw Queries, and added documentation.New ProjectsAxvius.Testing.NUnit: Provides fluent assertion methods for NUnit.Azure Conversion plugin for VS 2010: Azure Conversion Wizard is a plugin for VS 2010. The wizard converts your AZP.NET solutions for .NET 3.5 and higher to Windows Azure Platform. BlogSpam.net API: A simple C#.NET wrapper for the BlogSpam.net comment spam service.Bonyad Project Managing System: This is for managing bonyad projects.Camp Araminta: This project will be used to coordinate development efforts on the Camp Araminta website.code: This is demo summary ! Education Fellows Meta Service: Rebranded LaEMWS.Family Guide: This project is currently just for learning purposes. But it shall evolve to a fully functional solution later.HL7.NET: HL7.net groups all the neccessary code for managing HL7 standard. It makes it easy to add HL7 interoperability to your application. It is developed in C#.NETHyper-V Monitor Gadget: Hyper-V Monitor Gadget for Windows Sidebar that lists Hyper-V servers and their VM's. Supports status information and controlling them directly from the gadget.jp110311: Azure 312 ??????????? Azure ????????????????????????????????????????。Lugene: Index generation and distribution framework based on Lucene.net and index schemas provided by Lumen. Includes support for incremental updates of indexes, and a plugin framework for custom index providers.Planet Me: ...poc Dev: this is pco projectProcon 2: Procon Frostbite, rebuilt from the ground up.RandomNumbersGames: Small random numbers game which very helpful for people who want to develop their focusSistema Creeo: Sistema de Gestão de clínicasSPDiscussionBoard: SPDiscussionBoard started on 2005 while developing an ASP.NET forum and taking into consideration that I may use it on SharePoint in a day. Yesterday I remembered that, and started to alter it to run as a webpart inside SharePoint 2010, and it took about 4 hours to work.Video Commander: VideoCommander is an external control interface for vlc player. It enables the user to create play lists with start- and stop time and to play videos on a specified display. VideoCommander was especially developed for presenting videos on events like church services or theater.Windows Live Writer - Insert Tag Snippet Plugin: Insert Tag Snippet plugin is used to select a snippet from a collection of "user" defined snippets and insert it to the post. Prefix and suffix tags can also be defined. Especially useful for <code> and <pre> kind of tags. With Insert Tag Snippet plugin, you don't need to switch back to HTML view and than back to normal view again. The code is open for all communities' members to see how to develop a plugin for Windows Live Writer using C#.WMI Connection for ADO.NET: A lot of application have excellent support for ADO.NET connections. But many of them weren't desigend to work with WMI (Windows Management Instrumentation). This project puts them together, and adds the capability to access WMI data through the IDBConnection interface.Zugger: Zugger is an assistant application for those people who are using Zentao PMS. It provides the functions: 1. Your the counts of your bugs and tasks. 2. The lists of bugs and tasks. 3. Quick edit for bugs and tasks. 4. Notification of new bugs and tasks. It is developed in C# WPF

  Read the article

• CodePlex Daily Summary for Monday, March 14, 2011

  CodePlex Daily Summary for Monday, March 14, 2011Popular ReleasesProDinner - ASP.NET MVC EF4 Code First DDD jQuery Sample App: first release: ProDinner is an ASP.NET MVC sample application, it uses DDD, EF4 Code First for Data Access, jQuery and MvcProjectAwesome for Web UI, it has Multi-language User Interface Features: CRUD and search operations for entities Multi-Language User Interface upload and crop Images (make thumbnail) for meals pagination using "more results" button very rich and responsive UI (using Mvc Project Awesome) Multiple UI themes (using jQuery UI themes)Personal Activity Monitor - increas your productivity by eliminating timewasters: Personal Activity Monitor v0.1.2: removed PreEmptive monitoring attributes - maybe will be back in the future added scrollbars to the list of apps :)BEPUphysics: BEPUphysics v0.15.0: BEPUphysics v0.15.0!LiveChat Starter Kit: LCSK v1.1: This release contains couple of new features and bug fixes including: Features: Send chat transcript via email Operator can now invite visitor to chat (pro-active chat request) Bug Fixes: Operator management (Save and Delete) bug fixes Operator Console chat small fixesIronRuby: 1.1.3: IronRuby 1.1.3 is a servicing release that keeps on improving compatibility with Ruby 1.9.2 and includes IronRuby integration to Visual Studio 2010. We decided to drop 1.8.6 compatibility mode in all post-1.0 releases. We recommend using IronRuby 1.0 if you need 1.8.6 compatibility. The main purpose of this release is to sync with IronPython 2.7 release, i.e. to keep the Dynamic Language Runtime that both these languages build on top shareable. This release also fixes a few bugs: 5763 Use...SQL Server PowerShell Extensions: 2.3.2.1 Production: Release 2.3.2.1 implements SQLPSX as PowersShell version 2.0 modules. SQLPSX consists of 13 modules with 163 advanced functions, 2 cmdlets and 7 scripts for working with ADO.NET, SMO, Agent, RMO, SSIS, SQL script files, PBM, Performance Counters, SQLProfiler, Oracle and MySQL and using Powershell ISE as a SQL and Oracle query tool. In addition optional backend databases and SQL Server Reporting Services 2008 reports are provided with SQLServer and PBM modules. See readme file for details.Image.Viewer: 2011.2: Whats new for Image.Viewer 2011.2: New open from file New about dialog Minor Bug Fix's, improvements and speed upsIronPython: 2.7: On behalf of the IronPython team, I'm very pleased to announce the release of IronPython 2.7. This release contains all of the language features of Python 2.7, as well as several previously missing modules and numerous bug fixes. IronPython 2.7 also includes built-in Visual Studio support through IronPython Tools for Visual Studio. IronPython 2.7 requires .NET 4.0 or Silverlight 4. To download IronPython 2.7, visit http://ironpython.codeplex.com/releases/view/54498. Any bugs should be report...XML Explorer: XML Explorer 4.0.2: Changes in 4.0: This release is built on the Microsoft .NET Framework 4 Client Profile. Changed XSD validation to use the schema specified by the XML documents. Added a VS style Error List, double-clicking an error takes you to the offending node. XPathNavigator schema validation finally gives SourceObject (was fixed in .NET 4). Added Namespaces window and better support for XPath expressions in documents with a default namespace. Added ExpandAll and CollapseAll toolbar buttons (in a...Mobile Device Detection and Redirection: 1.0.0.0: Stable Release 51 Degrees.mobi Foundation has been in beta for some time now and has been used on thousands of websites worldwide. We’re now highly confident in the product and have designated this release as stable. We recommend all users update to this version. New Capabilities MappingsTo improve compatibility with other libraries some new .NET capabilities are now populated with wurfl data: “maximumRenderedPageSize” populated with “max_deck_size” “rendersBreaksAfterWmlAnchor” populated ...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.3: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager added interactive search for the lookupWPF Inspector: WPF Inspector 0.9.7: New Features in Version 0.9.7 - Support for .NET 3.5 and 4.0 - Multi-inspection of the same process - Property-Filtering for multiple keywords e.g. "Height Width" - Smart Element Selection - Select Controls by clicking CTRL, - Select Template-Parts by clicking CTRL+SHIFT - Possibility to hide the element adorner (over the context menu on the visual tree) - Many bugfixes??????????: All-In-One Code Framework ??? 2011-03-10: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ??，????。??????????All-In-One Code Framework ???，??20?Sample！！????，?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ASP.NET ??： CSASPNETBingMaps VBASPNETRemoteUploadAndDownload CS/VBASPNETSerializeJsonString CSASPNETIPtoLocation CSASPNETExcelLikeGridView ....... Winform??： FTPDownload FTPUpload MultiThreadedWebDownloader...Rawr: Rawr 4.1.0: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a Release of the WPF version, most of the general issues have been resolved. If you have a problem, please follow the Posting Guidelines and put it into the Issue Tracker. Whe...PHP Manager for IIS: PHP Manager 1.1.2 for IIS 7: This is a localization release of PHP Manager for IIS 7. It contains all the functionality available in 56962 plus a few bug fixes (see change list for more details). Most importantly this release is translated into five languages: German - the translation is provided by Christian Graefe Dutch - the translation is provided by Harrie Verveer Turkish - the translation is provided by Yusuf Oztürk Japanese - the translation is provided by Kenichi Wakasa Russian - the translation is provid...TweetSharp: TweetSharp v2.0.0: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Beta ChangesAdded user streams support Serialization is not attempted for Twitter 5xx errors Fixes based on feedback Third Party Library VersionsHammock v1.2.0: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comOffice Web.UI: Version 2.4: After having lost all modifications done for 2.3. I finally did it again... Have a look at http://www.officewebui.com/change-log Also, the documentation continues to grow... http://www.officewebui.com/category/kb ThanksmyCollections: Version 1.3: New in version 1.3 : Added Editor management for Books Added Amazon API for Books Us, Fr, De Added Amazon Us, Fr, De for Movies Added The MovieDB for Fr and De Added Author for Books Added Editor and Platform for Games Added Amazon Us, De for Games Added Studio for XXX Added Background for XXX Bug fixing with Softonic API Bug fixing with IMDB UI improvement Removed GraceNote Added Amazon Us,Fr, De for Series Added TVDB Fr and De for Series Added Tracks for Musi...patterns & practices : Composite Services: Composite Services Guidance - CTP2: Overview The Composite Services guidance (codename Reykjavik) provides best practices and capabilities for applying industry-known SOA design patterns when building robust, connected, service-oriented composite enterprise applications. These capabilities are implemented as a set of reusable components for analytic tracing, service virtualization, metadata centralization and versioning, and policy centralization as well as exception management, included in this release. Changes in this CTP ...Python Tools for Visual Studio: 1.0 Beta 1: Beta 1You can't install IronPython Tools for Visual Studio side-by-side with Python Tools for Visual Studio. A race condition sometimes causes local MPI debugging to miss breakpoints. When MPI jobs on a cluster fail they don’t get cleaned up correctly, which can cause debugging to stall because the associated MPI job is stuck in the queue. The "Threads" view has a race condition which can cause it not to display properly at times. VS2010 shortcuts that are pinned to the taskbar are so...New ProjectsASPRazorWebGrid: ASPRazorWebGrid can be used as an alternative for the built-in WebGrid in ASP.NET MVC3 using Razor. Features: - Server-side sorting and paging - Choice between url grid sort/paging parameters or page postback - Clean pager layoutBert Automation Framework: Bert Automation Framework. Bert can be leveraged to create automated tests for Windows or Web based applications. Framework is developed in C# using Visual Studio 2010, Microsofts AutomationUI and/or WATIN and be used to create automated tests. CasinoBot - A C# IRC gambling bot: CasinoBot is an IRC bot which allows you to play eight games. You can play single- and multiplayer games like hangman or slot. Includes a currency system, multi-channel support and a huge wordlist. The bot is written in C# using the SmartIRC4Net library.Cheque Management: This is a Cheque management project that help people to manage their cheque.CityLife: CityLife is a silverlight gameEmpty Razor Generator: A stripped down single file generator powered by Razor. Similiar to other generators available with the exception that is an absolute minimal implmentation. It's easy to tweak and very flexible. Driven in part because I would love to see it on WPF/WP7/Silverlight.ExtendedWorkFlow: Umbraco Extended WorkFlow to add extra functionality to create workflow process maps that can execute assemblies via commands and that have set stages. All stages, action and commands are logged within the umbraco audit trail. States and Action are also locked to user or role.Fluent CodeDOM: A library which allows you to work with CodeDOM in a way that is similar to the way you write your code. The library allows you to write your generated code much faster and make it more readable. Also, the usage of this library is very intuitive.FT: wftGoogle Map control for ASP.NET MVC: The control wraps Google maps API simplifying the use of Google maps in ASP.NET MVC applications. Based on Telerik Extensions for ASP.NET MVC this control shows how easy is to extend the Telerik framawork by building your own controls for ASP.NET MVC.GooNews - A WP7 Application: A Windows Phone 7 application. iTimeTrack IssueTracker: The iTimeTrack IssueTracker project is a (the AGPL open-source) subset of of the iTimeTrack time and issue tracker app that you can customize for your organizations use.jcompare: jcomparejuwenxue: submit some free bookKinect Finger Paint: Kinect Finger Paint is a Kinect application build on the OpenNI framework. It is meant as a tutorial and playground for experimenting with the Kinect interface.MTA_XNA_11_B: hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hProgrammingPractice: VC++ Programming PracticeSimple Backlog for Visual Studio: An enhanced task list for VS 2010, designed to make it easier to manage a backlog of features. Written in C# and WPF. Released under the Apache 2.0 licence.Text Reader: Text reader allows you to enter a text and it will read it up for you using TTS in windows. It's developed in C#.TrainTraX: TrainTraX is a system for training and certifying users with simple multiple choice question tests.Windows Charting: A windows charting application that uses microsoft charting controls for visual studio 2008WPFReveil: WPFReveil is a digital clock control on WPF. This project is composed two elements. WPFReveil.App is the application. WPFReveil contains the control clock.

  Read the article

< Previous Page | 116 117 118 119 120 121 122  | Next Page >