Search Results

Search found 10225 results on 409 pages for 'intel syntax'.

Page 120/409 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

• Windows XP Setup Fails to Recognize USB Floppy after formatting AHCI disk

  - by Strahn

  I am attempting to install Windows XP Professional x64 onto a HP EliteBook 8540w. I have downloaded both the latest Intel Rapid Storage Technology drivers and the Intel Storage Matrix drivers that are listed on HPs website and copied the drivers over to a floppy disk (two separate floppies, one for each version of the drivers.) Booting to my WinXP Pro x64 install CD, I go through the F6 process, load the driver and am able to see my HDD, delete, create and format partitions on it. When I go to continue the install, after checking the disk, the system asks me to enter the disk labeled "Intel Rapid Storage Technology" and press enter to continue. Nothing happens at this point when I press enter. This happens if I use the latest drivers or the older drivers. We have created a slipstreamed install CD using nLite that has the AHCI drivers integrated, which installs fine. However, we have identified a number of issues with the system that I believe are side-effects of using nLite for the slipstreaming and I am attempting to verify that. I have researched this issue and found a few examples of others having the same problem, but no solution. The USB floppy is a Lacie branded floppy, connecting it to a working XP workstation shows it to be the Y-E Data USB floppy drive that is supposedly 100% compatible with XP per MS KB 916196.

  Read the article

• What are the biggest, best CPUs that support Physical Address Extension?

  - by Giffyguy

  I'm looking for a CPU that will support PAE and fit into an LGA775 socket. This combination of technology is very much preferred for my current server hardware/software setup. My priorities in order of highest to lowest: PAE & LGA775 At least 1066Mhz FSB Largest CPU cache possible Multiple Cores if possible HyperThreading if possible Most other factors are of little-to-no consequence. I'm finding it very difficult to figure out what my options are. Intel doesn't have much useful information on PAE (since x64 is so dominant), and Wikipedia simply says that "PAE is provided by Intel Pentium Pro (and above) CPUs - including all later Pentium-series processors except the 400 MHz bus versions of the Pentium M." All of Intel's listed Pentium CPU's support Intel64, which makes me seriously doubt they will support PAE with a 32-bit OS. And Wikipedia's claim is so vague, I have no idea if they mean up-to-and-including the x64 Prescott CPUs. PAE is supposed to be an aspect of the x86 architecture, and I believe it is no longer supported in an x64 environment. Please correct me if I am wrong.

  Read the article

• picking a linux compatable motherboard

  - by Chris

  Last time I bought a new computer (I build them myself) I got a motherboard that had really poor linux support for a long time. Specifically the audio. I had to wait months before the kernel supported the on board audio chipset. That is exactly the situation I'm trying to avoid this time around. I have some specific questions about "server motherboards" actually. I looked at a few models of server motherboards by intel, and some random models on newegg. I wasn't able to see much of a difference from regular desktop motherboard other than most had two sockets, and support for much more ram. These boards seem more popular with Linux users. Why? AMD and Intel both have server CPUs as well. Some question, what's the difference? To make this question more concrete, I was looking at this this motherboard. The main questions about it that I can't answer are: Can I get a motherboard without on board raid and audio? I wanted to get a hardware raid controller and a PCI audio card. I thought a server motherboard would be cheaper and not have these "extras", since who wants an audio card on a server? Where can I found out about Linux support for the components on this board? "Intel ICH10R", "Realtek ALC889", "Marvell 88E8056" I'm buying this computer to work as a Linux desktop for a lot of compiling, coding and audio/video work, but I don't want to rule out the possibility of installing windows and playing some games at one point. (even if the last game I got has been sitting in its box unopened for almost a year). Is it a good idea to buy a "server motherboard" and play games on it, or are desktop boards better value for this? The ultimate solution for me would be a motherboard that had GPL divers for onboard LAN, a single CPU socket, lots of PCI express and PCI. USB 3.0, and no fancy hard disk controllers since I'll be getting a separate one.

  Read the article

• Move an SSD with Windows 7 to a new PCIe SATA controller card

  - by Shevek

  This is my current setup: Abit AB9 QuadGT motherboard which has an Intel P965 chipset with Intel ICH8 SATA Rev. 2.0 controller Kingston HyperX 3K 120GB SSD which supports SATA Rev. 3.0 Windows 7 Ultimate x64 For some reason I was unable to install Windows with the controller set in AHCI mode, even with the correct driver from Intel so it is currently in IDE mode. Due to the ICH8 controller being SATA Rev 2.0 and running in IDE mode, the SSD is operating well under it's published read/write speeds. I have ordered an Asus U3S6 controller card to add both SATA Rev. 3.0 and USB 3.0 to my computer. The motherboard does have a PCIe x4 slot available so I will hopefully achieve the full potential of my SSD. My question is this - am I able to swap the SSD over to the controller card from the motherboard controller without having to clean install Windows? I am hoping that all I will need to do is ensure that the controller card drivers are available to Windows and set the registry as per this KB article. Will this work or should I perform a clean installation?

  Read the article

• Getting Dell E6320 with I7 to work with 3 monitors at 1920x1080p x 3

  - by MadBoy

  I want to buy Dell E6320 which comes with Intel Core I7-2620M (2.70GHz, 4MB cache, Dual Core) with Intel HD Graphics 3000. Laptop will come with docking station. I want to connect 3 monitors to that docking station so that working at home would give me some additional boost. Docking station will allow me to connect only 2 monitors so I'm looking at following other options: Matrox TRIPLEHEAD2GO DIGITAL Edition or TRIPLEHEAD2GO DP Edition. But reading Matrox Support Page intel GPU can't run the highest resolution with 3 monitors connected, it even gets worse since it seems monitors would have to be able to work at 50hz. Also I'm not sure but it seems that Matrox doesn't split the monitors as 3 separate monitors but simply as one big space (which is a bit opposite to what I need) Buy 2 or maybe just 1 USB based monitor but it would also mean having 1 or 2 different monitors then the main one, unless I buy 3 USB based monitors which would mean more money to spend. Also I found only couple of models and most of them require USB 3.0 and no other cables to plug in (nice but costly - couldn't find decent monitor with only USB for sending signal and having power connected normally) . But docking station has only one USB 3.0 port. Can I use hub and still get it to work? Find some converters from Digital to USB (I think DisplayLink does some?) Buy different laptop but what kind? I need it to be I7, small (13"), fast and lightweight. At same time it requires docking station that I can use at home to connect 3 external monitors. Some other suggested solution... Edit: I need 3 monitors for work in terms of coding in Visual Studio or having word/excel/outlook open. Nothing fancy. Maybe some movie once in a while.

  Read the article

• Asus K55VM usb 3.0 issue

  - by user2141481

  Good day superusers! I own the above laptop and I found out that there are some unknown and unusual issues with usb 3.0 ports. I haven't noticed anything strange until now. I got a new toshiba usb 3.0 external hdd and when I try to copy larger amount of data from my disk to the external hdd, the OS(windows 7) randomly starts ignoring the external hdd. It doesn't shut it down, it kinda just stops responding but the light on the hdd is still lit. I get an error that the files cannot be copied. I have reinstalled windows 7, installed all drivers(including intel chipset drivers of course) and the issue is still present. It acts normal when copying small amount of data. Also, I heard that some intel chipsets have an issue with usb, something about the connectors not transferring power when the usb device enters some kind of "low power mode" causing the device to stop responding and you need to plug it out and in again. But the thing is, my Intel® Chief River Chipset HM76 is not on the list of affected hardware(not ENTIRELY sure though). If anyone has any idea of what the problem to this might be, I'd be greatful. Edit: The hdd works perfectly fine even for large amounts of data if plugged in the usb 2.0 port!

  Read the article

• Mysterious Windows 7 slowdown problem

  - by cletus

  I have a fairly beefy machine: Intel Q9450 8GB DDR2800 (4x2) Intel X25-M G2 80GB SSD Several other hard drives Windows 7 Ultimate 64 In the last month I've gotten a mysterious slowdown problem. When I start my IDE (IntelliJ IDEA) it usually takes about 20 seconds on the SSD. If my machine has been on for a day or two (as far as I can tell this is the only pattern) and I try to start the IDE, it brings my machine to a halt. CPU usage goes up to 25% per core (so it's basically 100% usage) and it takes up to 5 minutes to start. Other things I've noticed: iTunes will start to skip and stutter (my music is running off a second hard drive). The only persistent things I'm running are: AVG Anti-Virus Spybot (the slowdown predates this) Hamachi and Murmur (again the slowdown predates this) Apple Airport Base Agent HP OfficeJet 8500 driver/manager The browser I use is Chrome. I can't think why that'd be relevant but it's always on so I thought I'd mention it. When this happens I can't see a reason for it in the process list. No CPU hogs. No spikes in IO activity that I can see. Basically I'm at a loss to explain it and need to reboot, at which point everything returns to normal (for awhile). FWIW the Intel SSD is about 75-80% full. I know being too full can really degrade performance. I don't believe that's the issue here. Does anyone have any ideas on what I can do to fix this or at least help find what's going wrong? This same machine (sans SSD) could run Win XP and stay up fine for a month or two.

  Read the article

• Turning on Bluetooth disables wifi on Yoga 2

  - by Yostage

  I have a Lenovo Yoga 2. The moment that I turn on bluetooth, the wifi drops out - I lose connection, and connecting again shows "connection failed". If I turn the bluetooth off, wifi can reestablish fine. I've tried lots of different combinations of drivers for both the wifi and the bluetooth, but no combination has has changed this behavior yet. I've read some speculation that the cards have insufficient shielding, but that seems like kind of a large flaw to ship with. I've tried with a Carbon X1, a Yoga 2 Pro, and a Yoga 2 all next to each other on the desk while running InSSIDer. The X1 and the Y2P don't lose wifi connection when the bluetooth turns on, but the Y2 does immediately. The Y2P and the Y2 are running the same drivers for bluetooth and wifi, and appear to have the same wireless card internally. During the failure state, InSSIDer still sees signal strength for my network, but I cannot connect to it. stats: the card that comes in the laptop is an Intel Wireless-N 7260 Intel Bluetooth driver is at 17.0.1401.422 Intel Wireless driver is at 17.0.2.5 Windows 8.1 x64 Home wifi is a Medialink MWN-WAPR150N

  Read the article

• Building vs buying a server for an academic lab [closed]

  - by Roy

  I'm looking for advice on the classic build vs buy question. We need a new linux server to run Matlab computation on in our lab (academic). Matlab parallel computing toolbox licence allows up to 12 local workers so we are aiming at a 12 core server with 4GB memory per core (total of 48gb). The system will have an SSD for the OS and a raid-5 (4x2tb) for data. I looked around and found a (relatively) cheap vendor, Silicon Mechanics, that offers a system to our liking (specs below) for $6732. However, buying the components from newegg cost only $4464! The difference is $2268 which is 50% of the base cost. If buying from a company can be thought of as a sort of insurance, basically my premiums are of 50% of the base cost which to me sounds like a lot. Of course any downtime is bad, but the work is not "mission critical", i.e. if it takes a few days to fix it when it breaks its no the end of the world. If it takes weeks to months then its a problem. If it breaks 2-3 times in 3 years, not too bad. If it breaks every month not good. In term of build experience, I set up a linux cluster in grad school (from existing computers) and I build my home pcs but I never built a server before. The server components I'm thinking about: 1 x SUPERMICRO SYS-7046T-6F 4U Tower Server Barebone Dual LGA 1366 Intel 5520 DDR3 1333/1066/800 ($1,050) 12 x Kingston 4GB 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) ECC Unbuffered Server Memory ($420) 2 x Intel Xeon E5645 Westmere-EP 2.4GHz LGA 1366 80W Six-Core ($1,116) 4 x Seagate Constellation ES 2TB 7200 RPM SATA 6.0Gb/s 3.5" ($1,040) 1 x SAMSUNG Internal DVD Writer Black SATA ($20) 1 x Intel 520 Series 2.5" 180GB SATA III MLC SSD $300 1 x LSI LSI00281 PCI-Express 2.0 x8 MD2 Low profile SATA / SAS MegaRAID SAS 9260CV-4i Controller Card, $695

  Read the article

• Flickering dual screens in Virtual Box Ubuntu 13.10 Guest

  - by alexleonard

  I have Ubuntu 13.10 x64 installed as a guest in VirtualBox (under a Windows 8.1 host) and have the settings for the virtual machine setup to run with a monitor count of 2, 128MB video memory and 3D acceleration enabled. In my guest I have the virtual box additions installed (which allowed me to have two 1920x1080 screens). Here's a screenshot of my VM settings. My laptop is an Asus N550JV which has both Intel's HD Graphics 4600 GPU and Nvidia's GeForce GT 750M. By default though I believe the Intel GFX card is being used to render the VM. When I boot up the VM it loads perfectly on dual screens, however whenever I move the mouse from one screen to the other (I have a Dell S2340L running over a HDMI connection as a second screen) the screen flickers. I've tried a variety of settings changes in both Ubuntu and the VM settings, but cannot seem to stop this screen flicker. I also used the NVidia control panel in Windows to force the dedicated graphics card to always be used but found that the display driver sometimes crashed whilst working in the VM, resulting in my VM session being destroyed, so I figured it's better to stick with the Intel GFX as that appears to be more stable. I also tried without 3D acceleration but that was much worse, and if I ran the VM with a low amount of graphics memory it really struggled. Here's my dmesg output: http://pastebin.com/1LJuYWMj (not sure if this is helpful in this situation). I read some posts suggesting changes to /etc/X11/xorg.conf but I don't appear to have an xorg.conf file. There were also a few posts (though related to Synergy) suggesting running xset -dpms but this command doesn't appear to have had any effect for me. As an additional note, I'm finding that window drawing in the guest is a little laggy/glitchy. For example, quickly scrolling through a web page may result in parts of the viewport displaying original content. Certainly I notice drawing issues most in the web browser, but it also impacts other software with parts of the window not being drawn when, say, switching between accounts in thunderbird. Any suggestions greatly appreciated!

  Read the article

• Linux boot - stop the kernel switching to a new framebuffer mode clearing output

  - by Avio

  I'm working on an embedded system (based onUbuntu 12.04 LTS) and I'm customizing its kernel. I'm having some problem with upstart, mountall and plymouth. Nothing unsolvable I suppose, but the real problem is that I can't diagnose properly what's going on because the kernel (or maybe plymouth) changes the video mode in the middle of the boot process. This completely wipes entire lines of log and prevents any debugging of kernel misconfigurations. My Grub2 config seems to be ok with: GRUB_CMDLINE_LINUX="" GRUB_CMDLINE_LINUX_DEFAULT="acpi=force noplymouth" GRUB_GFXMODE=1024x768x32 GRUB_GFXPAYLOAD_LINUX=keep Here is some relevant output of lspci: 00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) And here is the relevant portion of my kernel configuration: CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_DRM=y CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_I915=y CONFIG_DRM_I915_KMS=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_VESA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=640 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y Every other custom/stock kernel boot fine with that Grub2 config. What I would like to have is a single flow of messages on a single console (retaining one screen resolution) from the bootup logo till the login prompt. Does anybody know what I have to tweak to achieve this?

  Read the article

• Is there any functional-like unix shell?

  - by Caruccio

  I'm (really) newbie to functional programming (in fact only had contact with it using python) but seems to be a good approach for some list-intensive tasks in a shell environment. I'd love to do something like this: $ [ git clone $host/$repo for repo in repo1 repo2 repo3 ] Is there any Unix shell with these kind of feature? Or maybe some feature to allow easy shell access (commands, env/vars, readline, etc...) from within python (the idea is to use python's interactive interpreter as a replacement to bash). EDIT: Maybe a comparative example would clarify. Let's say I have a list composed of dir/file: $ FILES=( build/project.rpm build/project.src.rpm ) And I want to do a really simple task: copy all files to dist/ AND install it in the system (it's part of a build process): Using bash: $ cp ${files[*]} dist/ $ cd dist && rpm -Uvh $(for f in ${files[*]}; do basename $f; done)) Using a "pythonic shell" approach (caution: this is imaginary code): $ cp [ os.path.join('dist', os.path.basename(file)) for file in FILES ] 'dist' Can you see the difference ? THAT is what i'm talking about. How can not exits a shell with these kind of stuff build-in yet? It's a real pain to handle lists in shell, even its being a so common task: list of files, list of PIDs, list of everything. And a really, really, important point: using syntax/tools/features everybody already knows: sh and python. IPython seams to be on a good direction, but it's bloated: if var name starts with '$', it does this, if '$$' it does that. It's syntax is not "natural", so many rules and "workarounds" ([ ln.upper() for ln in !ls ] -- syntax error)

  Read the article

• Windows 8 Killed my SSDs

  - by SLaks

  I have a computer running 2 256GB Crucial M4's (CT256M4SSD2) in a RAID 0 (striped) array on an ASUS P9X79 Pro using Intel's (built-in) RAID system. I recently installed Windows 8 Pro as UEFI on this RAID array. (wiping a fully-function Windows 7 non-UEFI installation) Now, whenever the computer is left running for about an hour, the system no longer sees those drives. Since those drives contain Windows, this leads to various forms of BSODs. If I Intel RSTe (RAID manager) is running at the time, it will say that the disk backing that RAID array has been removed. Once this happens, if I reset the computer, it will no longer boot. Entering BIOS setup shows that the SATA 3 (6Gbps) ports that those disks are connected to are both empty. If I then power down the system completely, then turn it on again, the drives reappear, but the problem repeats after another hour or so. I have inconclusively determined that the problem occurs even if Windows is not running (booted into the installation environment from a UEFI flash drive) I don't think there has been any data corruption since this started happening, although I have had two strange issues with a GIT repo on that disk. sfc /ScanNow and Intel's disk check (in RSTe) both do not find anything. Does anyone know what might cause this?

  Read the article

• What's wrong with my MySql query ?!

  - by Anytime

  This is a query I am doing with mysql using PHP This is the query line <?php $query = "SELECT * FROM node WHERE type = 'student_report' AND uid = '{$uid}' LIMIT 1 ORDER BY created DESC"; ?> I get the following error You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'ORDER BY created DESC' at line 1

  Read the article

• Grant permissions to a set of databases matching a pattern in MysQL 5.0

  - by Xian

  I'm lead to understand that the following grants all proveleges to all databases that name begin with 'xian_', but mysql complains about a syntax error near ''xian_... GRANT ALL PRIVILEGES ON 'xian_%.*' TO xian@'192.168.1.%'; What is the correct syntax? Am I right in thinking that the _ needs escaping to \_ too as it is also a wildcard?

  Read the article

• How to add a default value to an already existing column?

  - by Earlz

  I have an existing column in my SQL Server database. I have tried about everything I can think of but can not get a default value to be added to the column. What works in every other database is alter table mytable alter column mycolumn set default(now()) --mycolumn is a datetime How do I do this in SQL Server? The error I get for that exact syntax is incorrect syntax near the keyword 'set'

  Read the article

• busybox shell refuses to execute the particular line of script

  - by neil1234

  Hi, I am using busybox shell to execute a script which the bash executes when i boot linux using the nfs. Please let me know the correct alternative for this line. cur_major=$((0x`stat -c %t $dev 2>/dev/null`)) The busybox throws in an error saying "0x" syntax error, which i understand is the problem with the syntax of this line. Thanks in advance

  Read the article

• Executing procedural queries in perl

  - by KalpaG

  I have a query like this set @valid_total:=0; set @invalid_total:=0; select week as weekno, measured_week,project_id as project, role_category_id as role_category, valid_count,valid_tickets, (@valid_total := @valid_total + valid_count) as valid_total, invalid_count,invalid_tickets, (@invalid_total := @invalid_total + invalid_count) as invalid_total from metric_fault_bug_project where measured_week = yearweek(curdate()) and role_category_id = 1 and project_id = 11; it executes fine in heidi (MySQL client) but when it comes to perl, it gives me this error DBD::mysql::st execute failed: You have an error in your SQL syntax; check the m anual that corresponds to your MySQL server version for the right syntax to use near ':=0; set :=0; select week as weekno, measured_week,project_id as project' at line 1 at D:\Mx\scripts\test.pl line 35. Can't execute SQL statement: You have an error in your SQL syntax; check the man ual that corresponds to your MySQL server version for the right syntax to use ne ar ':=0; set :=0; select week as weekno, measured_week,project_id as project' at line 1 The problem seem to be in the set @valid_total := 0; line. I am fairly new to Perl. Can anyone help? this is the complete perl code #!/usr/bin/perl #use lib '/x01/home/kalpag/libs'; use DBI; use strict; use warnings; my $sid = 'issues'; my $user = 'root'; my $passwd = 'kalpa'; my $connection = "DBI:mysql:database=$sid;host=localhost"; my $dbhh = DBI->connect( $connection, $user, $passwd) || die "Database connection not made: $DBI::errstr"; my $sql_query = 'set @valid_total:=0; set @invalid_total:=0; select week as weekno, measured_week,project_id, role_category_id as role_category, valid_count,valid_tickets, (@valid_total := @valid_total + valid_count) as valid_total, invalid_count,invalid_tickets, (@invalid_total := @invalid_total + invalid_count) as invalid_total from metric_fault_bug_project where measured_week = yearweek(curdate()) and role_category_id = 1 and project_id = 11'; my $sth = $dbhh->prepare($sql_query) or die "Can't prepare SQL statement: $DBI::errstr\n"; $sth->execute() or die "Can't execute SQL statement: $DBI::errstr\n"; while ( my @memory = $sth->fetchrow() ) { print "@memory \n"; }

  Read the article

• MySQL query from subquery not working

  - by James Goodwin

  I am trying to return a number based on the count of results from a table and to avoid having to count the results twice in the IF statement I am using a subquery. However I get a syntax error when trying to run the query, the subquery I have tested by itself runs fine. Any ideas what is wrong with the query? The syntax looks correct to me SELECT IF(daily_count>8000,0,IF(daily_count>6000,1,2)) FROM ( SELECT count(*) as daily_count FROM orders201003 WHERE DATE_FORMAT(date_sub(curdate(), INTERVAL 1 DAY),"%d-%m-%y") = DATE_FORMAT(reqDate,"%d-%m-%y") ) q

  Read the article

• Brackets around Stored Procedure in ADODB Command Text

  - by KennerL90

  Help me understand why this is happening! I use the ADODB.Command object. The Command Text is set to the Stored Procedure Name. Sometimes, if I DON'T add brackets around the stored procedure name, I get a Syntax Error or Access Violation error. Sometimes, if I DO add brackets around the stored procedure name, I get a Syntax Error or Access Violation error.

  Read the article

• PHP object access using string

  - by Rob Waring

  Hi all, I have an object in PHP with some very odd property names. I just need to know how to access a property when it's name is "//www.w3.org/1999/02/22-rdf-syntax-ns#type". I found something that suggested $object->{'//www.w3.org/1999/02/22-rdf-syntax-ns#type'}; but that doesn't seem to work. Thanks in advance Rob

  Read the article

• problem importing data into older mysql version

  - by conandor

  I dump data from MySQL version 5.1.30 from server 1 # mysqldump mydb1 > mydb1.sql Then I import it to server 2 which have MySQL version 5.1.24-rc However I got an error important halfway. # mysql mydb1 < mydb1.sql ERROR 1064 (42000) at line 1984: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ''9012345678' at line 1 Any idea how I can solve it?

  Read the article

• Toplink Exception, whats wrong?

  - by java_dude

  Hey, I've got an excpetion when I generate this EJB SQL Statement. Exception Description: Syntax error parsing the query [SELECT h FROM Busmodul h WHERE LOWER(h.modulNummer) LIKE :modulnummer AND h.einbauort.id = :einbauort_fk AND h.plattform.id = :plattform_fk ORDER BY TRIM(TRAILING '-' FROM CONCAT('0', h.modulNummer))], line 1, column 150: syntax error at [TRIM]. Internal Exception: line 1:150: expecting IDENT, found 'TRIM' Whats the meaning of IDENT. Any Ideas what I am doing wrong? Regards

  Read the article

• Does REGEX differ from PHP to Python

  - by daemonfire300

  hi there, I found this post: http://stackoverflow.com/questions/118143/python-regex-vs-php-regex but I actually did not get if Python's REGEX syntax matches PHP's REGEX syntax. I started to convert some of my old PHP code to python (due to g's appengine etc.), and now I would like to know whether the regex is 100% convertable, by simple copy & paste. regards,

  Read the article

• how can we find that this processor supports how much memory?????

  - by Zia ur Rahman

  I have just started the Assembly language programming and in the first lecture our teacher told us about intel 8080 and intel 8085 and he said there was 64k memory with these processor. Now i want to know that how we find this amount of memory with specific processor, for example i have a processor 1.8 Ghz , now how i can find out the amount of memory that can be used with this processor. what i am trying to ask is tell me the method how we can find out this amount of memory?

  Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >