Search Results

Search found 3387 results on 136 pages for 'layer'.

Page 120/136 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

• Java iterative vs recursive

  - by user1389813

  Can anyone explain why the following recursive method is faster than the iterative one (Both are doing it string concatenation) ? Isn't the iterative approach suppose to beat up the recursive one ? plus each recursive call adds a new layer on top of the stack which can be very space inefficient. private static void string_concat(StringBuilder sb, int count){ if(count >= 9999) return; string_concat(sb.append(count), count+1); } public static void main(String [] arg){ long s = System.currentTimeMillis(); StringBuilder sb = new StringBuilder(); for(int i = 0; i < 9999; i++){ sb.append(i); } System.out.println(System.currentTimeMillis()-s); s = System.currentTimeMillis(); string_concat(new StringBuilder(),0); System.out.println(System.currentTimeMillis()-s); } I ran the program multiple time, and the recursive one always ends up 3-4 times faster than the iterative one. What could be the main reason there that is causing the iterative one slower ?

  Read the article

• Improving the efficiency of multiple concurrent Core Animation animations

  - by Alex

  I have a view in my app that is very similar to the month view in the built-in Calendar app. There's a subview that holds the individual cells (a custom UIView subclass that draws text into its layer), and when the user navigates to the next "month", I create the new cells and slide the view to show them. When the animation stops, I remove the old, hidden cells and set things up so it's ready to go for the next animation. This all works nicely. However, I'd like to animate the cells' text color, as in the Calendar app, so that the outgoing ones transition to a lighter color and the incoming ones transition to a darker color. The problems is that I can have as many as 70 cells, so doing individual animations is very slow -- between 5-10 fps on my iPhone 3GS. I'm trying to find a less computationally intense way of doing this. My reading of the Shark results is that the majority of the time is spent redrawing the text for each frame for each frame. This makes sense, since text rendering is hardly the cheapest operation. I've considered creating a second view -- one holding the "outgoing" state and one holding the "incoming" state and using a single opacity animation to gradually reveal the updated cells while both are sliding. I'm concerned that instead of having 70 cells, I'll have 140, which seems like a lot of views. So, is that too many views or would there be a better way of doing this?

  Read the article

• Conceptual data modeling: Is RDF the right tool? Other solutions?

  - by paprika

  I'm planning a system that combines various data sources and lets users do simple queries on these. A part of the system needs to act as an abstraction layer that knows all connected data sources: the user shouldn't [need to] know about the underlying data "providers". A data provider could be anything: a relational DBMS, a bug tracking system, ..., a weather station. They are hooked up to the query system through a common API that defines how to "offer" data. The type of queries a certain data provider understands is given by its "offer" (e.g. I know these entities, I can give you aggregates of type X for relationship Y, ...). My concern right now is the unification of the data: the various data providers need to agree on a common vocabulary (e.g. the name of the entity "customer" could vary across different systems). Thus, defining a high level representation of the entities and their relationships is required. So far I have the following requirements: I need to be able to define objects and their properties/attributes. Further, arbitrary relations between these objects need to be represented: a verb that defines the nature of the relation (e.g. "knows"), the multiplicity (e.g. 1:n) and the direction/navigability of the relation. It occurs to me that RDF is a viable option, but is it "the right tool" for this job? What other solutions/frameworks do exist for semantic data modeling that have a machine readable representation and why are they better suited for this task? I'm grateful for every opinion and pointer to helpful resources.

  Read the article

• Testing Hibernate DAO, without building the universe around it.

  - by Varun Mehta

  We have an application built using spring/Hibernate/MySQL, now we want to test the DAO layer, but here are a few shortcomings we face. Consider the use case of multiple objects connected to one another, eg: Book has Pages. The Page object cannot exist without the Book as book_id is mandatory FK in Page. For testing a Page I have to create a Book. This simple usecase is easy to manage, but if you start building a Library, till you don't create the whole universe surrounding the Book and Page, you cannot test it! So to test Page; Create Library Create Section Create Genre Create Author Create Book Create Page Now test Page. Is there an easy way to by pass this "universe creation" and just test he page object in isolation. I also want to be able to test HQLs related to Page. eg: SELECT new com.test.BookPage (book.id, page.name) FROM Book book, Page page. JUnit is supposed to run in isolation, so I have to write the whole test case to create the Page. Any tips will be useful.

  Read the article

• Should Service Depend on Many Repositories, or Break Them Up?

  - by Josh Pollard

  I'm using a repository pattern for my data access. So I basically have a repository per table/class. My UI currently uses service classes to actually get things done, and these service classes wrap, and therefore depend on repositories. In many cases my services are only dependent upon one or two repositories, so things aren't too crazy. Unfortunately, one of my forms in the UI expects the user to enter data that will span five different tables. For this form I made a single service class that depends upon five repositories. Then the methods within the service for saving and loading the data call the appropriate methods on all of the corresponding repositories. As you can imagine, the save and load methods in this service are really big. Also, unit testing this service is getting really difficult because I have to setup so many fake repositories. Would it have been a better choice to break this single service apart into a few smaller services? It would put more code at the UI layer, but would make the services smaller and more testable.

  Read the article

• More efficient way of writing this javascript

  - by nblackburn

  I am creating a contact form for my website and and using javascript to the first layer of validation before submitting it which is then checked again via php but i am relatively new to javascript, here is my script... $("#send").click(function() { var fullname = $("input#fullname").val(); var email = $("input#email").val(); var subject = $("input#subject").val(); var message = $("textarea#message").val(); if (fullname == ""){ $("input#fullname").css("background","#d02624"); $("input#fullname").css("color","#121212"); }else{ $("input#fullname").css("background","#121212"); $("input#fullname").css("color","#5c5c5c"); } if (email == ""){ $("input#email").css("background","#d02624"); $("input#email").css("color","#121212"); }else{ $("input#email").css("background","#121212"); $("input#email").css("color","#5c5c5c"); } if (subject == ""){ $("input#subject").css("background","#d02624"); $("input#subject").css("color","#121212"); }else{ $("input#subject").css("background","#121212"); $("input#subject").css("color","#5c5c5c"); } if (message == ""){ $("textarea#message").css("background","#d02624"); $("textarea#message").css("color","#121212"); }else{ $("textarea#message").css("background","#121212"); $("textarea#message").css("color","#5c5c5c"); } if (name && email && subject && message != ""){ alert("YAY"); } }); How can i write this more efficiently and make the alert show if all the fields are filled out, thanks.

  Read the article

• Dependency Injection: How to pass DB around?

  - by Stephane

  Edit: This is a conceptual question first and foremost. I can make applications work without knowing this, but I'm trying to learn the concept. I've seen lots of videos with related classes and that makes sense, but when it comes to classes wrapping around other classes, I can't seem to grasp where things should be instantiated/passed around. =-=-=-=-=-=-= Question: Let's say I have a simple page that loads data from a table, manipulates the result and displays it. Simple. I'm going to use '=' for instantiating a class and '-' for passing a class in using constructor injection. It seems to me that the database has to be passed from one end of the application to the other which doesn't seem right. Here's how I would do it if I wanted to separate concerns: index =>Controller =>Model Layer =>Database =>DAO->Database I have this rule in my head that says I'm not supposed to create objects inside other objects. So what do I do with the Database? Or even the Model for that matter? I'm obviously missing something so basic about this. I would love a simplified example so that I can move forward in my code. I feel really hamstrung by this.

  Read the article

• Iterating Through N Level Children

  - by bobber205

  This seems like something neat that might be "built into" jQuery but I think it's still worth asking. I have a problem where that can easily be solved by iterating through all the children of a element. I've recently discovered I need to account for the cases where I would need to do a level or two deeper than the "1 level" (just calling .children() once) I am currently doing. jQuery.each(divToLookAt.children(), function(index, element) { //do stuff } ); This is what I'm current doing. To go a second layer deep, I run another loop after doing stuff code for each element. jQuery.each(divToLookAt.children(), function(index, element) { //do stuff jQuery.each(jQuery(element).children(), function(indexLevelTwo, elementLevelTwo) { //do stuff } ); } ); If I want to go yet another level deep, I have to do this all over again. This is clearly not good. I'd love to declare a "level" variable and then have it all take care of. Anyone have any ideas for a clean efficient jQueryish solution? Thanks!

  Read the article

• Wrong class type in objective C

  - by Max Hui

  I have a parent class and a child class. GameObjectBase (parent) GameObjectPlayer(child). When I override a method in Child class and call it using [myPlayerClass showNextFrame] It is calling the parent class one. It turns out in the debugger, I see the myPlayerClass was indeed class type GameObjectBase (which is the parent class) How come? GameObjectBase.h #import <Foundation/Foundation.h> #import "cocos2d.h" @class GameLayer; @interface GameObjectBase : NSObject { /* CCSprite *gameObjectSprite; // Sprite representing this game object GameLayer *parentGameLayer; */ // Reference of the game layer this object // belongs to } @property (nonatomic, assign) CCSprite *gameObjectSprite; @property (nonatomic, assign) GameLayer *parentGameLayer; // Class method. Autorelease + (id) initWithGameLayer:(GameLayer *) gamelayer imageFileName:(NSString *) fileName; // "Virtual methods" that the derived class should implement. // If not implemented, this method will be called and Assert game - (void) update: (ccTime) dt; - (void) showNextFrame; @end GameObjectPlayer.h #import <Foundation/Foundation.h> #import "GameObjectBase.h" @interface GameObjectPlayer : GameObjectBase { int direction; } @property (nonatomic) int direction; @end GameLayer.h #import "cocos2d.h" #import "GameObjectPlayer.h" @interface GameLayer : CCLayer { } // returns a CCScene that contains the GameLayer as the only child +(CCScene *) scene; @property (nonatomic, strong) GameObjectPlayer *player; @end When I call examine in debugger what type "temp" is in this function inside GameLayer class, it's giving parent class GameObjectBase instead of subclass GameObjectPlayer - (void) update:(ccTime) dt { GameObjectPlayer *temp = _player; [temp showNextFrame]; }

  Read the article

• dhcp-snooping option 82 drops valid dhcp requests on 2610 series Procurve switches

  - by kce

  We are slowly starting to implement dhcp-snooping on our HP ProCurve 2610 series switches, all running the R.11.72 firmware. I'm seeing some strange behavior where dhcp-request or dhcp-renew packets are dropped when originating from "downstream" switches due "untrusted relay information from client". The full error: Received untrusted relay information from client <mac-address> on port <port-number> In more detail we have a 48 port HP2610 (Switch A) and a 24 port HP2610 (Switch B). Switch B is "downstream" of Switch A by virtue of a DSL connection to one of Switch A ports. The dhcp server is connected to Switch A. The relevant bits are as follows: Switch A dhcp-snooping dhcp-snooping authorized-server 192.168.0.254 dhcp-snooping vlan 1 168 interface 25 name "Server" dhcp-snooping trust exit Switch B dhcp-snooping dhcp-snooping authorized-server 192.168.0.254 dhcp-snooping vlan 1 interface Trk1 dhcp-snooping trust exit The switches are set to trust BOTH the port the authorized dhcp server is attached to and its IP address. This is all well and good for the clients attached to Switch A, but the clients attached to Switch B get denied due to the "untrusted relay information" error. This is odd for a few reasons 1) dhcp-relay is not configured on either switch, 2) the Layer-3 network here is flat, same subnet. DHCP packets should not have a modified option 82 attribute. dhcp-relay does appear to be enabled by default however: SWITCH A# show dhcp-relay DHCP Relay Agent : Enabled Option 82 : Disabled Response validation : Disabled Option 82 handle policy : append Remote ID : mac Client Requests Server Responses Valid Dropped Valid Dropped ---------- ---------- ---------- ---------- 0 0 0 0 SWITCH B# show dhcp-relay DHCP Relay Agent : Enabled Option 82 : Disabled Response validation : Disabled Option 82 handle policy : append Remote ID : mac Client Requests Server Responses Valid Dropped Valid Dropped ---------- ---------- ---------- ---------- 40156 0 0 0 And interestingly enough the dhcp-relay agent seems very busy on Switch B, but why? As far as I can tell there is no reason why dhcp requests need a relay with this topology. And furthermore I can't tell why the upstream switch is dropping legitimate dhcp requests for untrusted relay information when the relay agent in question (on Switch B) isn't modifying the option 82 attributes anyway. Adding the no dhcp-snooping option 82 on Switch A allows the dhcp traffic from Switch B to be approved by Switch A, by virtue of just turning off that feature. What are the repercussions of not validating option 82 modified dhcp traffic? If I disable option 82 on all my "upstream" switches - will they pass dhcp traffic from any downstream switch regardless of that traffic's legitimacy? This behavior is client operating system agnostic. I see it with both Windows and Linux clients. Our DHCP servers are either Windows Server 2003 or Windows Server 2008 R2 machines. I see this behavior regardless of the DHCP servers' operating system. Can anyone shed some light on what's happening here and give me some recommendations on how I should proceed with configuring the option 82 setting? I feel like i just haven't completely grokked dhcp-relaying and option 82 attributes.

  Read the article

• Using WSUS Admin Console from outside domain

  - by Nick

  Environment: I have a workstation on our primary domain. We have a primary WSUS Server that is the upstream server of 8 different testing domains. The Primary WSUS server is not part of any domain. Routing is configured between my workstation and the Primary WSUS server. I can RDP to the Primary WSUS sever without any problem. The router is configured to forward any any between my workstation and the Primary WSUS server. This WSUS server cannot be part of a domain due to external requirements (I can't change them) on the lab I work in. The version of WSUS is WSUS 3.0 SP 2 What I want to do: I need to connect to the WSUS server with the WSUS Admin console from my local workstation. The end goal is to connect via Powershell and manage with that. I also need to take what I do here and port it to the 8 test domains so I can manage those WSUS servers. The routing is all in place so I can talk to the servers, it's just connecting to the WSUS console that is causing problems. The problem: I cannot get my workstation to connect to the WSUS Console. I get one of the following errors depending on the setup. 1st error: Cannot connect to 'WSUS'. You do not have the permissions required to access this WSUS server. To connect to the server you must be a member of the WSUS Administrators or WSUS Reporters security groups I also get the warning 7012 from the event log that says the same thing. 2nd error: Cannot connect to 'WSUS'. The server may be using another port or different Secure Sockets Layer setting. What I have tried: So far I have configured IIS for Anonymous Authentication on both the WSUS Administration and ApiRemoting30 using an account will call WSUS_User. With this in place, I get the 1st error. When I do this though, the local WSUS Console cannot be used either. Reverting back to only Windows Authentication allows the local console to work, but the remote console now give the 2nd error. I have confirmed the port, and that there is no SSL in use (which is a policy that is pushed from above, that I cannot effect). I have placed WSUS_User in the groups mentioned above, but it still does not connect. I made sure WSUS_User has full access on C:\Program Files\Update Services and C:\Program Files\Update Services\WebServices I am not very familiar with the workings of WSUS or IIS, and have gone as far as I can figure out on my own. Googling these errors all take me to the same steps about Anonymous Authentication and configuring permissions on folders. Note: I have cross-posted this to StackOverflow as well.

  Read the article

• Custom initrd init script: how to create /dev/initctl

  - by Posco Grubb

  I have a virtual machine (VMM is Xen 3.3) equipped with two IDE HDD's (/dev/hda and /dev/hdb). The root file system is in /dev/hda1, where Scientific Linux 5.4 is installed. /dev/hdb contains an empty ext2 file system. I want to protect the root file system from writes by the VM by using aufs (AnotherUnionFS) to layer a writable file system on top of the root file system. The changes to / will be written to the file system located on /dev/hdb. (Furthermore, outside the VM, the file backing the /dev/hda will also be set to read-only permissions, so the VMM should also prevent the VM from modifying at that level.) (The purpose of this setup: be able to corrupt a virtual machine using software-implemented fault injection but preserve the file system image in order to quickly reboot the VM to a fault-free state.) How do I get an initrd init script to do the necessary mounts to create the union file system? I've tried 2 approaches: I've tried modifying the nash script that mkinitrd creates, but I don't know what setuproot and switchroot do and how to make them use my aufs as the new root. Apparently, nobody else here knows either. (EDIT: I take that back.) I've tried building a LiveCD (using linux-live-6.3.0) and then modifying the Bash /linuxrc script from the generated initrd, and I got the mounts correct, but the final /sbin/init complains about /dev/initctl. Specifically, my /linuxrc mounts the aufs at /union. The last few lines of /linuxrc effectively do the following: cd /union mkdir -p mnt/live pivot_root . mnt/live exec sbin/chroot . sbin/init </dev/console >/dev/console 2>&1 When init starts, it outputs something like init: /dev/initctl: No such file or directory. What is supposed to create this FIFO? I found no such filename in the original linuxrc and liblinuxlive scripts. I tried creating it via "mkfifo /dev/initctl", but then init complained about a timeout opening or writing to the FIFO. Would appreciate any help or pointers. Thanks.

  Read the article

• The Koyal Group Info Mag News¦Charged building material could make the renewable grid a reality

  - by Chyler Tilton

  What if your cell phone didn’t come with a battery? Imagine, instead, if the material from which your phone was built was a battery. The promise of strong load-bearing materials that can also work as batteries represents something of a holy grail for engineers. And in a letter published online in Nano Letters last week, a team of researchers from Vanderbilt University describes what it says is a breakthrough in turning that dream into an electrocharged reality. The researchers etched nanopores into silicon layers, which were infused with a polyethylene oxide-ionic liquid composite and coated with an atomically thin layer of carbon. In doing so, they created small but strong supercapacitor battery systems, which stored electricity in a solid electrolyte, instead of using corrosive chemical liquids found in traditional batteries. These supercapacitors could store and release about 98 percent of the energy that was used to charge them, and they held onto their charges even as they were squashed and stretched at pressures up to 44 pounds per square inch. Small pieces of them were even strong enough to hang a laptop from—a big, fat Dell, no less. Although the supercapacitors resemble small charcoal wafers, they could theoretically be molded into just about any shape, including a cell phone’s casing or the chassis of a sedan. They could also be charged—and evacuated of their charge—in less time than is the case for traditional batteries. “We’ve demonstrated, for the first time, the simple proof-of-concept that this can be done,” says Cary Pint, an assistant professor in the university’s mechanical engineering department and one of the authors of the new paper. “Now we can extend this to all kinds of different materials systems to make practical composites with materials specifically tailored to a host of different types of applications. We see this as being just the tip of a very massive iceberg.” Pint says potential applications for such materials would go well beyond “neat tech gadgets,” eventually becoming a “transformational technology” in everything from rocket ships to sedans to home building materials. “These types of systems could range in size from electric powered aircraft all the way down to little tiny flying robots, where adding an extra on-board battery inhibits the potential capability of the system,” Pint says. And they could help the world shift to the intermittencies of renewable energy power grids, where powerful batteries are needed to help keep the lights on when the sun is down or when the wind is not blowing. “Using the materials that make up a home as the native platform for energy storage to complement intermittent resources could also open the door to improve the prospects for solar energy on the U.S. grid,” Pint says. “I personally believe that these types of multifunctional materials are critical to a sustainable electric grid system that integrates solar energy as a key power source.”

  Read the article

• Tying down a cloud by virtualizing everything and then locking VMs to real hardware as necessary

  - by tudor

  I'm looking for a cloud software solution that: Can run on both server and desktop machines; Virtualizes hardware and has the option of exposing each real machine to the cloud; Allows a VM to be "locked" to a set of real hardware capabilities and stay there until moved (e.g. a user's "real" desktop); Allows a VM to link to some types of devices elsewhere (e.g. USB/serial via ethernet); and Is geography-aware to control movement of VMs between real networks. I'm aware that this may be the holy grail of virtualization, and I've searched alot. Some solutions appear to meet some criteria but not others. Most cloud implementations appear to ignore real hardware, for example. I realise that this may be solved by using three different implementations in combination: A standard cloud server farm. A bare-metal network backup utility with PXEBoot. VNC and/or VDI. (VNC obviously would require the real hardware to be running.) This combination, however, has some serious drawbacks that I'd like to solve by treating it as one system. My explanation follows... I have a network of real servers and desktops in multiple locations. I've virtualized servers before using Virtualbox and that's worked quite well. I've even connected USB devices to VMs on servers. I would like to virtualize the desktops in all my offices to facilitate movement of desktops, remote access (e.g. VDI) and bare-metal backups. However, I know that there are problems with this. For example, some desktops have specific hardware (e.g. 3D graphics cards, USB devices, etc) that limit their mobility. Geographic constraints also limit movement in that VMs can be moved easily within offices, but transferring between offices is not always preferable. What I would like to find is a system that can virtualize everything from bare-metal easily by maintaining an abstraction layer on each client and server machine that exposes the hardware available and runs as a cloud. Then certain VMs would be "locked" to specific hardware (so that, e.g. the VM runs only on their own desktop.) This would be required for situations where speed is important (e.g. 3D graphics pass-through). In addition, abstracted low-speed devices (e.g. USB) could be piped from real hardware to a VM in the cloud. This is important since if a VM is taken down, another VM can connect to the real hardware for minimum downtime.

  Read the article

• Planning trunk capacity for multiple GbE switches

  - by wuckachucka

  Without measuring throughput (it's at the top of the list; this is just theoretical), I want to know the most standard method for trunking VLANs on multiple Gigabit (GbE) switches to a core Layer 3 GbE switch. Say you have three VLANs: VLAN10 (10.0.0.0/24) Servers: your typical Windows DC/file server, Exchange, and an Accounting/SQL server. VLAN20: (10.0.1.0/24) Sales: needs access to everything on VLAN10; doesn't need access to VLAN30 and vice-versa. VLAN20: (10.0.1.0/24) Support: needs access to everything on VLAN10; doesn't need access to VLAN20 and vice-versa. Here's how I think this should work in my head: Switch #1: Ports 2-20 are assigned to VLAN20; all the Sales workstations and printers are connected here. Optional 10GbE combo port #1 is trunked to L3 switch's 10 GbE combo port #1. Switch #2: Ports 2-20 are assigned to VLAN30; all the Support workstations and printers are connected here. Optional 10GbE combo port #1 is trunked to L3 switch's 10 GbE combo port #2. Core L3 switch: Ports 2-10 are assigned to VLAN10; all three servers are connected here. With a standard 10/100 x 24 switch, it'll usually come with one or two 1 GbE uplink ports; carrying over this logic to a 10/100/1000 x 24, the "optional" 10 GbE combo ports that most higher-end switches can get shouldn't really be an option. Keep in mind I haven't tested anything yet, I'm primarily moving in this direction for growth (don't want to buy 10/100 switches and have to replace those within a couple of years) and security (being able to control access between VLANs with L3 routing/packet filtering ACLs). Does this sound right? Do I really need the 10 GbE ports? It seems very non-standard and expensive, but it "feels" right when you think about 40 or 50 workstations trunking up to the L3 switch over 1 GbE standard ports. If say 20 workstations want to download a 10 GB image from the servers concurrently, wouldn't the trunk be the bottleneck? At least if the trunk was 10 GbE, you'd have 10x1GbE nodes being able to reach their theoretical max. What about switch stacking? Some of the D-Links I've been looking at have HDMI interfaces for stacking. As far as I know, stacking two switches creates one logical switch, but is this just for management I/O or does the switches use the (assuming it's HDMI 1.3) 10.2 Gbps for carrying data back and forth?

  Read the article

• Automatic layout of manual network mapping

  - by Paul

  So I have a small business network mainly consisting of two routed layer-2 domains with a total of ca. 100 devices spread over ca. 2000m² production and office spaces. Typical problems to solve using the graph would be: Over what (cable) path is a PC connected to the server? Where to expect devices connected to a switch port? I want to generate a graph of the physical network topology: Nodes are endpoint devices, switch ports, wall outlets, patch panel ports etc. Edges are cable connections. Ideally, grouping edges (or segments) that pass through the same bundle could be grouped. Also I would like to augment the graph data with automatically gathered data (monitoring state, MAC address, Switch port <- MAC entries to build up parts of the map). At the moment I use graphviz for this inside a Confluence wiki like that: layout = "neato" overlap = scale subgraph { rankdir = "TB" subgraph cluster_r1pf1 { r1pf1 [label="{ Rack 1 PF 1 | { <p1>P1 | <p2>P2 | <p3>P3} }", shape=record] } subgraph cluster_switch1 { switch1 [label="{ Rack 1 Switch 1 | { <p1> P1 | <p1> P1 | <p3> P3} }", shape=record] } r1pf1:p1 -> switch1:p1 (obviously there are dozens of entries omitted here) Problem is: I have a hard time to influence graphviz to generate a bearable layout. Edges overlap so bad that you can't read the diagram anymore. The question is: What other tools (be it interactive like Visio, Omnigraffle or I/O-oriented like graphviz) exist that would allow an easily versionable (as in: Operates on a text file) documentation that is both machine and human readable and editable? Why not OmniGraffle or Visio? Well we don't have Macs and Visio is not available at the moment. To buy it I would need good arguments. Automation would be one of that. But last time I looked, versioning Visio files or even thinking about automatic handling was a nightmare. Related: Network Mapping Tools basically asks the same with a focus on generating the complete graph automatically (but without the need to document cabling connections) Recommendations for automatic computer inventory brings up links of "all-in-one" solutions

  Read the article

• dd-wrt router firmware QoS troubleshooting

  - by Jeff Atwood

  I've been using the dd-wrt firmware on my router and I like it a lot! But -- I'm not sure the quality of service (QoS) is working on it. I have it set up as follows: http, port 80 -- Premium bittorrent, port 6969 -- Bulk https, port 443 -- Premium dns, port 53 -- Premium Per the QoS documentation, these levels are: bandwidth is allocated based on the following percentages of uplink and downlink values for each class: Exempt: 100mbps - ignores global limits. Premium: 75% - 100% Express: 15% - 100% Standard: 10% - 100% Bulk: 1.5% - 100% This doesn't entirely seem to work, though -- with busy torrents going I get major pauses in my web browsing which sucks! The QoS documentation gives some steps to check the QoS ... What you'll be interested to look at will be the first set of source and destination IP, including the port numbers. Next the presence of l7proto and the "mark" field. The entries indicate the current live connection QoS priority applied on them based on the "mark" field. The "mark" values correspond to the following Exempt: 100 Premium: 10 Express: 20 Standard: 30 Bulk: 40 (no QoS matched): 0 You may see "mark=0" for some l7proto service even though they are in configured in the list of QoS rules. This may mean that the layer 7 pattern matching system didn't match a new or changed header for that protocol. Custom service on port matches will usually take care of these. On port 6969 (bittorrent) I see a weird mixture of stuff with mark=0 and mark=40 like so cat /proc/net/ip_conntrack udp 17 105 src=98.162.182.42 dst=1.2.3.4 sport=64512 dport=6969 packets=3 bytes=290 src=10.0.0.2 dst=98.162.182.42 sport=6969 dport=64512 packets=4 bytes=202 [ASSURED] mark=0 secmark=0 use=1 tcp 6 117 TIME_WAIT src=98.248.173.174 dst=1.2.3.4 sport=51114 dport=6969 packets=12 bytes=704 src=10.0.0.2 dst=98.248.173.174 sport=6969 dport=51114 packets=10 bytes=440 [ASSURED] mark=40 secmark=0 use=1 tcp 6 598 ESTABLISHED src=165.132.128.201 dst=1.2.3.4 sport=57218 dport=6969 packets=8024 bytes=9919881 src=10.0.0.2 dst=165.132.128.201 sport=6969 dport=57218 packets=4211 bytes=239607 [ASSURED] mark=0 secmark=0 use=1 tcp 6 586 ESTABLISHED src=68.46.9.24 dst=1.2.3.4 sport=64688 dport=6969 packets=6 bytes=490 src=10.0.0.2 dst=68.46.9.24 sport=6969 dport=64688 packets=8 bytes=944 [ASSURED] mark=40 secmark=0 use=1 udp 17 45 src=222.254.228.38 dst=1.2.3.4 sport=25438 dport=6969 packets=5 bytes=454 src=10.0.0.2 dst=222.254.228.38 sport=6969 dport=25438 packets=3 bytes=154 [ASSURED] mark=0 secmark=0 use=1 ( full file visible at http://pastebin.com/AZE6EtWm ) I've been playing around with this log for a little while and I can't see any patterns! Why is some port 6969 bittorrent traffic tagged mark=0 (not matched) by dd-wrt's QoS while others are tagged mark=40 (Bulk) .. any ideas?

  Read the article

• Real-time offline folder-to-folder backup application needed (Windows)

  - by niktech

  I recently started using Intel Matrix Storage RAID solution that allowed me to use my 5 1TB drives for two RAID volumes. First one a 1TB RAID 0 striped across all 5 drives and second one a RAID 5 across the rest of the free space on all drives (around 2.85TB usable space). The RAID 0 I use for OS, applications and games while the RAID 5 I use as a more-permanent type storage (photos, etc). Now I do realize that running the OS and applications on RAID 0 across 5 drives is very dangerous, which is what brings up the following question. Is there a reliable freeware realtime backup application that can backup a set of folders from one drive to another drive (no online backups needed)? I've already tried a few (Mozy, Yadis, Comodo Backup, GFI Backup, Idoo, Crash Plan) but none meet my requirements: Low CPU and RAM usage. Realtime Backups - as soon as a file is modified in the source folder, it is added to the backup queue which will be processed with the lowest priority when the CPU is idle. This backup queue should persist in cases of computer restarts (ie: the source and destination folders should always have the same set of files, except for the ones waiting in the backup queue). Incremental Backups - if only 10 bytes changed in a 1GB file, the app should only copy those 10 new bytes. Ability to back up locked and opened files (some apps, like Yadis, can't back up critical files like browser favorites). Ability to run as a service (no need for any user to log-in to have the app started). Optional requirements: Compression of the destination into a well-known format (RAR, Zip) that can be directly read without the use of the application. Preset source folders (such as Browser Favorites, Game Saves, Application Settings, etc). The idea is to use RAID 0 array as "semi-persistent RAM-like" storage which in case of a failure can be quickly rebuilt by reinstalling the OS, apps and games and copying over the settings, saves, favorites from the RAID 5. I'm also thinking of taking this RAID 0 as RAM idea to the extreme with SSDs (as soon as we get some nice 6Gb/s SATA III SSDs out there), where a couple of SSDs chained in RAID 0 will work as yet another semi-persistent cache layer sitting between the RAM and the HD. I'm just hoping there already exists an application that satisfies these requirements... otherwise I'll have to write one myself, which I would prefer not to do.

  Read the article

• Very slow printing from print server

  - by evolvd

  Print server is a VM on Xen The VM is Windows 2003 32bit. During the issue the VM is not being taxed in anyway, cpu, memory, hd read/write, and network speed is all good. The problem that I see is the transfer of the print file from the print server to the printer. The 80Mb file is transferred from the client to the print server in about 2 minutes but then it takes about 2 hours for that file to be sent to the printer. I can't figure out why this would just start to happen. The printer is rebooted every evening and is just used for one large print job in the morning. The server has been rebooted with no effect I changed the spool option to send the entire spool to the server before printing starts and it had no effect. This printer problem did happen to come about after some changes to the Xen environment. The Xen servers changed from using HBA NIC cards to software iscsi and a new switch was put in. I don't think this is related to the problem since all the speeds on the VMs are better now. The changed happened on Saturday and the first print to this printer happened on Monday morning. I'm just putting that out there but like I said I don't think it is related but I don't want to rule it out. At this point I don't have many other options besides the physical layer. I can switch out network cable that goes to the printer and I might be able to print the same job to another printer. I wont be able to test those things out till this afternoon though. Any other ideas or test I could do to try to find the reason for the slow speed? I forgot to say that this is only happening when printing to this one printer. ===Update=== I found out that there are a few printers that currently have this issue, not just the one. There are over 30 printers on the server though so I know it's not happening to all of them. I printed a large pdf doc from the server and it was able to print at the normal speed. If the machine sends the large print request it gets to the server fine but then slow to get from the server to the printer. If sent directly from the printer it gets to the printer at the normal speed. The question now is why is there a speed difference when it comes from the machine and why would it start now?

  Read the article

• Win-XP Browsers Hang on page load - (waiting for...)

  - by CHarmon

  Hello, I’m having problems with my browsers hanging on loading pages on my desktop machine. I’m using Windows XP Pro with SP3 and fully updated except for IE 8. All three of my browsers, IE 7, Chrome and Firefox are having the same problems. Pages are not being loaded and are hanging on “waiting for …”. The browsers are waiting for the page being loaded or ad servers. Sometimes a page will load but the loading graphic continues to be displayed as if the page were still loading when the page appears to be fully loaded. The problem is bad enough that I can’t really use any of my browsers. I can eventually get most pages to load by stopping and restarting the page load. I have DSL modem with a wireless router and I have been able to eliminate the modem and router from being the source of my problem. My laptop doesn’t have any problems even when hardwired to the router and with the wireless connection disabled. I deleted the NIC and let XP re-install. Also tried a different network cable. Tried the same router port used in the laptop test. One clue that may be important is that I can’t connect to my router using the desktop machine…the page hangs while trying to connect. I can ping the router and I can quickly connect to the router using the laptop. I also can’t use the Windows update process – the page never fully loads. The problem affects other user accounts and even happens in safe mode. I am convinced the problem is with part of the O/S…some layer able to affect all of the browsers. The purpose of this post is to see if anyone has some ideas before I do a XP repair. I have done quite a bit of trouble-shooting: Ran a full anti-virus scan with AVG – no problems. Ran full scans with Spybot, MalwareBytes and Sophos anti-rootkit – no problems. Ran Chkdsk with both options checked. Ran Disk Clean up Defragged RE-installed IE7 Cleared all the browser caches Ran Ccleaner (registry tool) Ran HijackThis – nothing unusual (problem happens in safe mode too) Ran Process Explorer – no unusual processes Used System Restore and fell back several days – no change in the problem Booted to last known good configuration – no change in the problem Ran MicrosoftFixit50199.msi – no change in the problem Any ideas or suggestions would be appreciated…I’m not looking forward to doing a repair on XP. Thanks in advance for any help.

  Read the article

• Monitoring tools that can take high rate and high volume?

  - by Jon Watte

  We're using Cacti with RRDTool to monitor and graph about 100,000 counters spread across about 1,000 Linux-based nodes. However, our current setup generally only gives us 5-minute graphs (with some data being minute-based); we often make changes where seeing feedback in "near real time" would be of value. I'd like approximately a week of 5- or 10-second data, a year of 1-minute data, and 5 years of 10-minute data. I have SSD disks and a dual-hexa-core server to spare. I tried setting up a Graphite/carbon/whisper server, and had about 15 nodes pipe to it, but it only has "average" for the retention function when promoting to older buckets. This is almost useless -- I'd like min, max, average, standard deviation, and perhaps "total sum" and "number of samples" or perhaps "95th percentile" available. The developer claims there's a new back-end "in beta" that allows you to write your own function, but this appears to still only do 1:1 retention (when saving older data, you really want the statistics calculated into many streams from a single input. Also, "in beta" seems a little risky for this installation. If I'm wrong about this assumption, I'd be happy to be shown my error! I've heard Zabbix recommended, but it puts data into MySQL or some other SQL database. 100,000 counters on a 5 second interval means 20,000 tps, and while I have an SSD, I don't have an 8-way RAID-6 with battery backup cache, which I think I'd need for that to work out :-) Again, if that's actually something that's not a problem, I'd be happy to be shown the error of my ways. Also, can Zabbix do the single data stream - promote with statistics thing? Finally, Munin claims to have a new 2.0 coming out "in beta" right now, and it boasts custom retention plans. However, again, it's that "in beta" part -- has anyone used that for real, and at scale? How did it perform, if so? I'm almost thinking about using a graphing front-end (such as Graphite) and rolling my own retention backend with a simple layer on top of mmap() and some stats. That wouldn't be particularly hard, and would probably perform very well, letting the kernel figure out the balance between frequency of flushing to disk and process operations. Any other suggestions I should look into? Note: it has to have shown itself able to sustain the kinds of data loads I'm suggesting above; if you can point at the specific implementation you're referencing, so much the better!

  Read the article

• How can I change how OS X's 'say' command pronounces a word?

  - by jwhitlock

  OS X's say command is useful for some tasks (such as Skype's 'notify me when a contact comes online), but it is pronouncing some names incorrectly. Is there a way to teach say to pronounce a word differently? For example, try: say "Hi, Joel Spolsky" The 'ol' sounds like 'ball' rather than 'old'. I'd like to add an exception that say "Pronounce Spolsky like this", rather than try to teach new linguistic rules. I bet there is a way since it can pronounce "iphone" as Apple wants. Update - After some research, here's what I've learned: Text-to-speech is split between turning the text to phonemes, and then the phonemes are turned into audio using a voice. Changing the voice doesn't effect the phonemes. The Speech Synthesis Manager has some functions for turning text to phonemes, and a method for registering a speech dictionary that will add new text-phoneme maps. However, Apple's speech dictionary must be in a binary form - I didn't find any plist XML. Using dtrace while running say, I found some interesting files opened in /System/Library/PrivateFrameworks/SpeechDictionary.framework/Resources. This is probably the speech dictionary, but they are all binary, except for Homophones, which is XML. Adding entries to Homophones does nothing - it is probably used in speech-to-text. They are also code signed by Apple - changing them may prevent some programs from working. PrefixDictionary CartNames CartLite SymbolDictionary Homophones There are ways to add text versions of application interface elements so VoiceOver works, a lot of which a developer gets for free, but there are tricky bits. The standard here appears to be to use a phonetic spelling as needed. My guesses are: say is a light layer of code on top of the Speech Synthesis Manager. It would be easy for the Apple devs to add a command line option to take the path to a speech dictionary plist for alternate phoneme mapping, but they didn't. It may be a useful open-source project to write a better say. Skype probably uses Speech Synthesis Manager directly, leaving no hooks to change the way my friend's names are pronounced, other than spelling them phonetically, which is silly. The easiest way to make a command line version of say is how JRobert suggested. Here's my quick implementation, using Doug Harris's spelling suggestion: #!/bin/sh echo $@ | tr '[A-Z]' '[a-z]' | sed "s/spolsky/spowlsky/g" | /usr/bin/say Finally, some fun command line stuff: # Apple is weird sqlite3 /System/Library/PrivateFrameworks/SpeechDictionary.framework/Resources/Tuples .dump # Get too much information about what files are being opened sudo dtrace -n 'syscall::open*:entry { printf("%s %s",execname,copyinstr(arg0)); }' # Just fun say -v bad "Joel Spolsky Spolsky Spolsky Spolsky Spolsky, Joel Spolsky Spolsky Spolsky Spolsky Spolsky" echo "scale=1000; 4*a(1)" | bc -l | say

  Read the article

• Random Computer Crashes

  - by Josh W.

  Ok, here's a wierd one for you all. Occasionally my PC here at work will crash in a very peculiar way. My dual monitors will suddenly go blank as if there is no longer a video signal, the USB mouse light will go dark and mouse stays unresponsive, the keyboard lights will not change status when the appropriate keys are pressed (Num/Caps/Scoll Lock). The CD Tray WILL open and close. But the computer will not respond to a ping request. For all intents & purposes it's as if the computer is off, except it wasn't intentional by me. The power light and internal fans are still on and I've now lost any unsaved work. Now here's where it gets wierd. This PC is part of a batch of PC's we got from a local vendor who does our initial system builds. Mine, and 6 other co-workers PCs all have the same issue. Originally we thought it was a bad combination of hardware, but through trial and error the only thing we haven't eliminated are the OS, Mobo & CPU. The problem was so bad for some of them that they ended up going back to their 5 year old dinosaurs in order to get some work done, for me the problem isn't as bad, maybe once every other day or so, but still enough to bite me in the ass if I've forgotten my ritualistic pressing of CTRL-S every 1-5 minutes. In this case we've tried two different video cards, two different power supplies, two different memory configurations, running on a UPS/not on UPS, updating/rolling back video drivers, three different bios revisions. The only things we haven't swapped are the mobo & cpu, mainly because a new mobo means a new Hardware Abstraction Layer, ie re-install of windows and there's alot of other software on this PC that takes forever to reload by hand. There was a base image that our systems team created with all the drivers installed and the basic setup of software our company uses, but they then must customize the setup for us programmers so it takes a while to get a new configuration up and going. I'm a programmer by day and am usually pretty good at diagnosing computer problems whether through trial and error or not. We've pretty much exhausted all the ideas we can think of here, short of a new mobo/cpu. Was hoping someone out there might have anything else we can try.. Relevant Parts: OS: XP Pro 32-bit Motherboard: Intel DG41RQ CPU: Intel Core-2 Quad Q9400 @ 2.66GHz Current BIOS Version/Date Intel Corp. RQG4110H.86A.0014.2010.0306.1151, 3/6/2010 Dual LCD's, Viewsonic VG930m & Samsung SyncMaster 910v (other people have different models, but listed in case there's some very wierd problem with the signals being sent/received) PS/2 Keyboard USB Microsoft Intellimouse BIOS Versions Tried: R 0013 12/23/2009 R 0014 3/6/2010 Video cards Tried GeForce 8400 GS Radeon HD 4350 - ASUS EAH4350 Two Different Power Supplies a 380W & 550W Ram Configurations 2GB - 1 x 2GB 4GB - 2 x 2GB

  Read the article

• PHP hits 100% CPU and eats RAM at the same time Monday to Friday

  - by Daniel Samuels

  We run a learning platform for primary schools here in the UK and it's all been running extremely well. However at around 4PM Monday to Friday we see the same issue arise -- 1-2 PHP threads will spike to 100% CPU and gradually start eating up RAM until the server(s) fall over. 98%+ of our requests are HTTPS, these come into our Layer 7 load balancer which then decrypts the SSL data, adds the X-HTTP-Forwarded-For header and forwards the data onto an application server (we have 2 of those at the moment) on port 80. Our application servers have Varnish on port 80 which takes in the request from the load balancer and passes the request through to Nginx on port 81. Nginx then works out which 'vhost' it needs to use and passes any PHP processing through to PHP-CGI which is listening on a socket (managed through spawn-fcgi). There's an instance of Memcached running too, MySQL runs on a separate server / slave setup. Throughout the day the load will typically go no higher than 0.8 on either of the application servers, however at around 4PM our problem arises. I've managed to run strace on a few of the actual threads when they cause the problem and I always see the same thing: stat("/usr/share/zoneinfo/Europe/London", {st_mode=S_IFREG|0644,st_size=3661, ...}) = 0 stat("/usr/share/zoneinfo/Europe/London", {st_mode=S_IFREG|0644,st_size=3661, ...}) = 0 This is repeated infinitely and never stops until you SEGKILL the process or oomkiller kills it. There are no cron jobs scheduled to run at that time and I don't have any way of seeing exactly what Nginx request is associated with the PHP process which is running. We are running PHP 5.3.14 which we upgraded to from 5.3.8 last week to rule out the older version being the problem. This issue has been going on a few months now and we have no idea what is causing it. We deploy our software very frequently, so it's difficult to track down a specific release which may have started the problem - especially as we do not know the date of the first occurrence of this issue. Varnish is version 3.0.1, Nginx is 1.0.6 (which I understand is about a year old now), our servers are running CentOS release 5.7 (Final) they have Intel i3 540s at 3.07Ghz and 8GB of RAM. There's a discussion on the Debian mailing list about something very similar, you can find that here. Has anyone seen anything like this in the past, does anyone have any ideas or suggestions? Are there a way of linking an Nginx request directly to a PHP thread? Is there a better way of seeing what the PHP process is doing? (I've seen GDB mentioned, though I'll have to recompile PHP) Thanks!

  Read the article

• Why Photoshop CS5's photomerge's result immediately disappear?

  - by koiyu

  I have a bunch of JPG-files which I want to stitch together with Photoshop's Photomerge function. I choose File → Automate → Photomerge... and browse for the files. Photoshop opens the files and starts analyzing. I see the process bar filling and different phases are mentioned on the process bar. Nothing weird there. When the merging is done (and if I don't blink my eyes), I can see layers-palette is populated with the chosen files and, by quickly judging from the layer thumbnails, they're properly aligned. Sometimes the image window itself can be seen, but not always. Problem is that the layers and the image disappear in a flash. There is no error message. Everything is like prior starting the photomerge. No file has been changed. I could continue to use Photoshop normally. This is what I've tried so far: Loaded folder which has 38 JPG images, 4272 x 2848 and ˜ 5 megabytes per file Loaded the same files, but chose Use Files instead of Use Folder in the photomerge's window Loaded 19 JPG images, 4272 x 2848 and ˜ 5 megabytes per file Loaded 10 JPG images, ⇑ see above Loaded 5 JPG images, see above Loaded 3 JPG images, see above Scaled the images to 2256 x 1504 and ˜< 1 megabytes per file Loaded in a set of 38, 19, 10, 5, 3 Following steps are tested with these smaller files and with a set of 5 images Read Adobe's forums and reduced the amount of RAM Photoshop uses gradually from ˜ 80 % to 50 % (though I didn't understand the logic behind this) Would've reduced cache tile size to 128K, but it was set so already Disabled OpenGL Scaled the images to 800 x 533 and ˜ 100 kilobytes per file, loaded a set of 5 Read more unanswered threads around the internet In between each test I closed and reopened Photoshop. This is the first time I've even tried using photomerge. Am I doing something wrong? How can I locate what is the problem? How do I fix this? Photoshop is 64 bit Extended CS5 version. I'm on a mid-2010 quad-core (i5) iMac with up-to-date Mac OS X 10.6.6. Edit: Weird. First loading the images into one file via File → Scripts → Load Files into Stack… and then using Edit → Auto-Align Layers…, which, effectively, is the same as photomerge (even the dialog looks kind of the same), works! Even with the original JPGs without any issues. This doesn't fix photomerge, though.

  Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >