Search Results

Search found 18897 results on 756 pages for 'network connectivity'.

Page 120/756 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

• IIS6 can't find site on local network

  - by chezy525

  I have a windows 2003 server with dual NICs running IIS6. I can access everything remotely, but the internal network can't seem to find the site regardless of which IP Address I try to go to. There are really several weird things that are happening here, but I'm going to limit this question to what I'm guessing to be the simplest problem (the solution to which I'm hoping solves other things as well): From the server itself, I can access the webpage using the primary IP address (i.e. http://192.168.1.2/index.htm), but not using the secondary IP address (i.e. http://10.10.10.2/index.htm). Self pinging both IP addresses works, and the "Web site identification" in IIS has the IP address set to "(All Unassigned)"... which I believe should bind both IP addresses to this site. I apologize if I'm not providing enough details about my setup, but at this point I don't even know what's relevant...

  Read the article

• Extend university wifi network

  - by asfasdoiuh ouhouhouh

  i live in a university campus and i can get wifi signal on the outside of my window but not in the house. The solution i use at the moment is a usb wifi dongle outside connected to my laptop but the lack of an internal antenna make the connection quite unreliable at times. So i was trying to find another solution to improve the reception of my network. One idea is to setup a router on the outside (in a place with stronger signal) and redirect the connection inside the house with an ethernet cable but the problem is that our Uni Wifi is managed by a capitve portal (BlueSocket with DNS redirection to login page) and the authentication has to happen on the mac address that connect to the net (so the client appliance in this case). If I use a router with Mac-Clone capability i will be able to be redirected trough the captive portal on my laptop computer and login from there or i need to setup my router to fill in the login page by itself? There are other hardware/software solutions i can use to get what i want?

  Read the article

• Mount linux partition as Windows network share over internet

  - by CptEO

  I have a Linux server running RHEL 6. I have two Windows servers. All servers are connected directly to the web with an external IP, they are not in a local lan. What I would like to achieve is to setup the Linux server so that it offers a single share (the whole partition) that can be mounted as network drive within Windows. I don't want to use any 3rd party software to access the linux server because I want to use the linux server as a backup for Bare Metal Restore. In order to do so, I need to be able to access the linux partition from within the Windows Recovery Enviroment where I cannot install any 3rd party software. The linux server should only be accessible from given IP addresses (e.g. the 2 windows servers). Does anyone know if the setup I would like to have is possible?

  Read the article

• Permission denied on network share

  - by Philipp

  i have a Windows 8 host system running a virtual(hyper-v) Debian6 client with an lamp environment. My development environment runs under Windows and I mapped the folder with my php files to a network drive so Apache has access to them.(mount.cifs //pc/share /var/share/) This far no problems - I see my app on windows in the browser. The problem is, I can't write stuff in php to the share folder - everytime i got a permission denied message in my error logs. For testing purpose i tried to change the directory permissions of /var/share with chmod -R 777 /var/share without success. Now Iam a little bit stumped.. has anyone an idea how to solve this?

  Read the article

• How to use a D-Link usb network adapter on debian

  - by Barranka

  I have a Debian (squeeze) desktop, and I need to use a D-Link 150 USB Wireless Network Adapter. So far I've done this: $ lsusb ... Bus 001 Device 006: ID 2001:3c18 D-Link Corp. ... After looking for a solution in google, I found that I needed to install the following package: firmware-ralink_0.28+squeeze1_all.deb I've installed it, but Debian doesn't want to find the adapter. When I run lsmod, I can't find what I'm supposed to find: rt2870sta Can you point me in the right direction?

  Read the article

• Windows Network copy and access denied randomly

  - by The King

  I have a windows 2008 R2 server and I now installed a new bigger HDD into it. I wanted to copy big AVI files to the new server hdd what is shared on the local network. I have write access to the servers hdd and I can successfully copy smaller files to it. But when I copy bigger files more than 500MB randomly on the copy I get Access Deny message. If I use RDP I can copy files through RDP client. I checked error messages at the server but I didn't found any error about this access deny. Because of RDP copy works I don't think that this could be hardware error. I think this is some kind of software setting error. Someone has faced this kind of error? Or somebody has idea what could cause or how to find the root of the problem?

  Read the article

• Backup of "Leavers" network directory

  - by Mez

  I want to create a backup of a Leavers network home directory. I've generally done this before by just creating an iso with genisoimage and then burning it. However, it seems that the latest users have 10G in their files. For archival purposes, I want to be able to burn these to multiple DVDs. How do I create these DVD iso images (I know it's got something to do with tar and stream-media-size, and then how do I restore them if I need them again? Using Debian

  Read the article

• How to detect an iPhone connecting a network?

  - by JayCrossler

  I've noticed through watching Wireshark that when an iPhone connects to a wifi network, it sends out a few IGMP/MDNS packets to 224.0.0.251 (LAN broadcast, I think). Is there any easy way to watch for these packets and then either run a script or send an event? Or, is the best way to just run a packet sniffer? Any simple ones that can send events or execute curl commands when a filter is triggered? When I run nc -u -l 5353 I get: My-Name-iPhonelocal??? x???)?? ??cc^C Can I do something like: nc -u -l 5353 | grep iPhonelocal | execute command...

  Read the article

• Computer freezes, wireless network icon disappears

  - by Heidi

  As you can see I have two problems. I have a Toshiba Tecra A3 computer. It is 5-6 years old and it is connected to a D-link router. For a period now it has not been working correctly. The computer freezes either when i try turning it on or when I have been using the computer for a short period of time. The times the computer works normally I have a problem with a disappearing wireless network icon, and so I have no internet. Can this be fixed or do I have to buy a new computer? I only use the computer for internet surfing and easy tasks like word etc, so I would like to keep it as long as possible.

  Read the article

• VMWare hypervisor with only 1 network card?

  - by Rafiq Maniar

  VMWare hypervisor minimum requirements states that the minimum network requirements is: one NIC, plus one for Management interface (source: http://www.vmware.com/products/datacenter-virtualization/vsphere-hypervisor/requirements.html) It used to be possible to use 1 NIC only. Is anybody using the new versions of VMWare in this configuration? I ask because my colo provider will only provide me with 1 uplink (my server does have 2 NICs). I need to be able to run the VMs and also have remote management using only 1 NIC. Possible?

  Read the article

• Blacklist a single access point of a wireless network

  - by Zr40

  At my university, one of the wireless access points is failing. When something tries to associate to the network using that access point, it deassociates the client, claiming 802.1X authentication failure. Other access points do work normally using the same credentials. The issue has been reported, but after a month it still has still not been fixed. Now, I'm looking for a way to blacklist the access point's BSSID, so the OS prefers other access points on the same SSID. How can I blacklist specific BSSIDs in either Mac OS X Snow Leopard or Windows 7?

  Read the article

• Network connection via USB

  - by Fco

  Can I get my Nexus One/Android on my local network over USB instead of WiFi and browse to my computer's IP address, the one to which the phone would be connected to, via USB? For instance, let's say my computer has an IP address 100.1.1.1 and when I go to it from the computer I would go to my localhost and see a website I've set up locally in the computer. Then, I connect my phone to that computer via USB. Can I then go to 100.1.1.1 from the browser and see the same website? All this through the USB, no WiFi?

  Read the article

• very Slow machine when searching the network

  - by Adam

  Hi We are using a Dell desktop machine with 2 GB RRAM & Pentium D 3.00 GHz. The machine is very slow when using our Sales program and searching over the local network. We have this problem on 2 machine which are the same spec - This one and another. All of our other machine (10) run fast with no issues. Our server is SBS 2008 and AV is AVG. All of our client machines are WinXp Pro SP3 using the latest drivers. Any ideas?

  Read the article

• "destination host unreachable" while ping attempt between 2 pc on 1 network

  - by Roberto Sadfasdf

  I have 2 computers in my network ones ip address is 192.168.2.31(PC-A) and the others is 192.168.2.33(PC-B). When I'm trying to ping from PC-B to PC-A it says: Pinging 192.168.2.33 with 32 bytes of data: Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Ping statistics for 192.168.2.33: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) And when i'm trying the otherwise it tells me same message with ip address switched..They are both can connect to the Internet

  Read the article

• Multiple network cards, controlling where my traffic goes

  - by thefinn93

  This is an Ubuntu 12.04 server install. I have multiple network cards, eth0 and eth1 lets call them. eth0 is connected to the internet, and all of my traffic goes through it, until eth1 gets plugged in. Then the machine tries to send everything through eth1, which for various and sundry reasons does not go out to the Interent. The only traffic it doesn't send through eth1 is traffic on eth0's subnet. It also will not accept inbound connections on eth0 from outside of eth0's subnet. I'd like all outbound traffic to go out eth0, but I'd like incoming connections from to either card from any subnet to work.

  Read the article

• How to setup VPN on home network

  - by Tone

  I am a software developer. I travel and sometimes have a need to access my files at home and tweak other family members computers. I would like to connect to my home network via VPN and then RDP into whatever machine i need to. Currently i have a Windows Server 08 machine, which is my file server, database server, web server (for development work), source control repository, etc. (and also somewhat of a workstation when i need it to be). I want to use this same machine to run my VPN through. I have a linksys WRTG54 router. My ISP is AT&T DSL, with a dynamic IP address - so i'm assuming I'll either need to request a static IP or sign up with one of those static ip services.. where it keeps your dynamic ip synced up with a static one. While I do understand software engineering I am no expert in networking. What do i need to do to setup my VPN?

  Read the article

• ESXI 4.0 Slow response in opening anything accross the network on a Virtual Server running Win2008

  - by user40944

  Hi I recently installed a HP ML350G6 Server with Windows Small Business Server 200864bit, Exchange 2007. The server was running fantastically and we transferred all user data onto the new server and no problems for 2 weeks! We then installed SQL2008 and transferred the accounts package onto the server and this is where the problems started. Users are now complaining to open a work document can take 2 minutes and the same with regard to anything else. The server itself seems fine, the virtual server seems fine! No disk performance problems (doesn't go above 50% unless i really copy lots of things), no memory, (12Gb only using 7Gb) cpu (usage is low average about 15%) etc on both the VM and in Windows Task manager. I have made sure disk caching is enabled on the raid controller (which made no difference). Network cards are running 1Gb and plugged into HP GB switch. Please help!

  Read the article

• Disable Network settings (TCP/IP & DNS) on Windows 7 Ultimate

  - by TiD91

  i also read this discussion here How to disable Tcp/Ip settings in windows 7 via GPO? about what i want to do but i still have problems. So here i am: i have a desktop pc with two accounts, both with Administrative rights. One is used by the entire my family, in particular by my brother. The problem is that i set some DNS and IP configurations to let be possible the VNC connection from remote. Now i would like to disable the network settings (TCP/IP and DNS) to prohibit my brother to change it preventing me to connect to it. So how can i do this? I set the policies from GPO but i still can change these settings from his account. Here's a pic of Registry Keys: http://imageshack.us/a/img339/3310/famigliapc2012092017274.png what didn't i do? Thanks in advance for your help. Rub|TiD

  Read the article

• Network-related icons suddenly removed

  - by Velcro

  Hello, On a fresh Windows 7 installation, I created some shortcuts icons to network shares on the Desktop. Without any warning, these icons are sometimes and randomly deleted from Desktop. I totally don't understand what it happens! They are not hidden, they just are simply deleted. This behavior occurs on one computer in my company. Others Windows 7 computers are not affected by that. And also it's the first time I encounter that. Do you have an idea about this problem? Thanks.

  Read the article

• Monitor torrent user in network [closed]

  - by Usman

  I am using active directory in windows server 2008 R2 having IP address is 10.10.10.10 and my DSL modem Ip is 10.10.10.101. All clients are using 10.10.10.101 default gw to access the Internet. I don't know who is using Torrent in network or downloading something via IDM or something else. I just want to Monitor my clients for who are download via torrent or whatever. Is there anything in Windows Server 2008r2 that would allow me to do this monitoring, or do I need something else?

  Read the article

• Introducing a Windows Domain Controller into an all mac-client network

  - by Anon

  A company is about to hire me to be their I.T. Admin. (They currently have no Admin). In the interview, they stated one of the things they want me to do is put in a MS Domain Controller. The thing is, they are a graphic design company with about 100 Mac Clients and maybe 5 Windows Clients. So other than login-credentials and network shares, what is the benefit of this? Should I just tell them to use the OSX equivalent of AD? How hard is it to learn whatever OSX's AD is?

  Read the article

• A Duplicate name exists on the network

  - by Adam

  Recently we changed out office IT structure from having a dedicated server to be the DC, a dedicated server for the exchange etc... (Each running Windows Server 2003 R2) Now we have a single server running Windows SBS 2008 and created a new domain (with a different domain name) We then changed every PC so it connected to the new domain and renamed every PC with a new naming structure. After I had done this, we were getting several PCs that would get the following message just before the login screen (Alt+Ctrl+Del Screen) A Duplicate name exists on the network I have checked the ADUC and have removed the trouble PCs from the list and renamed each PC and changed the SID before connecting back onto the domain but still getting this message. I have tried everything that i can think of but still getting the problem. Any help would be greatly appreticated.

  Read the article

• Multiple network interfaces and UDP packets distribution

  - by Robert Kubrick

  I have a Linux server with 2 1Gb network interfaces eth1 and eth2. If I start 2 clients listening to the same multicast address and each client connects through a different NIC (say client 1 listens to the multicast through eth1 and client 2 through eth2), then client 2 gets duplicate UDP packets. If both clients use the same interface eth1 on the other hand, both clients work fine. I have already tried to set arp_filter and proxy_arp to 1 (arp flux issue) but it hasn't solved the issue. Is this a Linux kernel problem? Or is there another way to setup the interfaces correctly?

  Read the article

• Automatically save attachments from mail on a network drive

  - by user269646

  Every morning I receive an automatically generated e-mail from a server, it includes a spreadsheet attachment. I made a rule in outlook that captures these emails. Now, I would like to make a macro to rename the attached file (. Xls) to =today() and saves it in a folder on a network drive. This macro must run every weekday at 8:00. I've made a lot of VBA in Excel, but have no experience in outlook. Might this be possible? And does anyone know how to do it? Kind regards Staal

  Read the article

• Cannot access internal network on OSX 10.6.6

  - by cabuki

  Last week, I began having trouble connecting to our internal web servers. Usually, a refresh would take care of it or switching to a different wireless network, but as of yesterday, this wasn't enough. We have an internal DNS server using dnsmasq and a private internal host name (us.lcl). Once I started having more issues with the names not resolving, I tried pinging the server. Using the internal host name (s1.us.lcl), it failed. I tried using the IP address, but that also failed. I have no problems accessing external sites with the exception of it being a bit slower than normal. A reboot yesterday at lunch time after following the instructions here seemed to fix the issue, but when I came into the office this morning, it had stopped working. As of this posting, I cannot ping, ssh or access the web server using the internal host name or ip address. I'm the only one running 10.6 in my office and none of my colleagues has this issue.

  Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >