Search Results

Search found 4813 results on 193 pages for 'ram shankar yadav'.

Page 120/193 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

  • RAID 1 not performing as expected

    - by Faken
    I recently bought a new 320Gb hard drive for my computer to set up RAID 1 on it for some added security. Installation went as smooth as could possibly be (plug in power, plug in data cable, start up computer, Intel software recognized new drive, right click create RAID 1, done!). However, for some inexplicable reason, I seem to have strange test results when using BENCH32. On my old configuration, a single 7200 rpm drive, I achieved about 60 MB/s write and 70 MB/s read. With a new RAID 1 configuration, I would expect the write to be slightly diminished but read to be significantly improved (though not exactly double speed). However, with the new configuration, I am getting 90 MB/s write and only about 80 MB/s read. I should NOT be getting improved write performance, especially NOT better than read! What's going on? My system setup is: q6600 2.4ghz CPU 4Gb DDR2 667mhz RAM on board Intel ICH9R "RAID chip" 2x Seagate 7200 RPM 320GB drives in RAID 1 Widows 7 home premium 64-bit

    Read the article

  • Why is hibernation still used?

    - by Moses
    I've never quite understood the original purpose of the Hibernation power state in Windows. I understand how it works, what processes take place, and what happens when you boot back up from Hibernate, but I've never truly understood why it's used. With today's technology, most notably with SSDs, RAM and CPUs becoming faster and faster, a cold boot on a clean/efficient Windows installation can be pretty fast (for some people, mere seconds from pushing the power button). Standby is even faster, sometimes instantaneous. Even SATA drives from 5-6 years ago can accomplish these fast boot times. Hibernation seems pointless to me when modern technology is considered, but perhaps there are applications that I'm not considering. What was the original purpose behind hibernation, and why do people still use it? Edit: I rescind my comment about hibernation being obsolete, as it obviously has very practical applications to laptops and mobile PCs, considering the power restrictions. I was mostly referring to hibernation being used on a desktop.

    Read the article

  • httpd service keep restarting. after 15-20 mins

    - by niraj
    I have recently purchased Dedicated Server which has 16bg ram and 1TB Harddisk. It has Cpanel and for firewall CSF Installd. I am mainly going to install it for File hosting service. Now the day i moved my httpd service keep restarting every 15-20 mins. It becomes unresponsive after that so have to manually restart it. My httpd settings are Start Servers = 5 Minimum Spare Servers = 5 Maximum Spare Servers = 10 Server Limit = 20000 Max Clients = 10000 Max Requests Per Child = 10000 Keep-Alive = On Keep-Alive Timeout = 5 Max Keep-Alive Requests = Unlimited Timeout 300 TOP is top - 14:53:41 up 1 day, 23:39, 2 users, load average: 0.10, 0.14, 0.09 Tasks: 1563 total, 1 running, 1562 sleeping, 0 stopped, 0 zombie Cpu(s): 0.7%us, 0.6%sy, 0.0%ni, 98.1%id, 0.2%wa, 0.0%hi, 0.5%si, 0.0%st Mem: 16303780k total, 16142048k used, 161732k free, 135264k buffers Swap: 8224760k total, 868k used, 8223892k free, 14136616k cached Please help me in this its keep happning.

    Read the article

  • What causes Windows Boot to stall?

    - by Nick Berardi
    For about 6 months now I have been having this weird problem where Windows 7 fails to fully boot correctly. What happens is this. Starting Windows shows up on the screen. Then 3 out of 4 times nothing else happens, no Windows Flag animation, just nothing occurs. After 3 or 4 restarts repeating steps 1-2 above, the Windows Flag animation finally shows up and everything works as expected. My question is what is causing this problem in steps 1 and 2? Because I have tried the following with no luck: Error checking and correcting of any disk errors Updating drivers Doing a clean install of Windows 7 My setup is as follows: Windows 7 64-bit Ultimate 8 GB RAM 128 GB Crucial SSD (firmware 0005) Dell Latitude E6410 Intel Wireless and Graphics Other than what I have tried above I am totally out of ideas and looking for some new ones to try.

    Read the article

  • BSOD when playing Portal 2 using ATI Radeon 4800 on H61M/U3S3 mobo

    - by Ben Walker
    playing Portal 2 will always give me blue screen of death, usually after about 10 minutes of playing. BSOD references atikmpag.sys. I have tried several updates for graphics driver and through ATI Catalyst Center. I have updated the motherboard BIOS. My RAM is OK. Nothing changes. I had previously run the game fine, then I removed my video card to use on-board graphics once, and after re-installing the video card, I get this problem every time. I am using: ATI Radeon 4800 ASRockH61M/U3S3 motherboard Windows 7 64-bit

    Read the article

  • Best Solution For My Requirements

    - by Eray
    Hello, I'm a web developer. I have a few small online web application and a few Wordpress blogs. But i don't have too much experience with installing / configuring web servers . One of my web application needs cron jobs. It will check a lot of web sites availability. And, this application will leech too much RAM. And i think shared-hosting isn't suitable for this. But 1GB storage is enough i think. I don't need too much storage for my web sites. What do you think ? Which hosting solution is more suitable for my requirements ? Reseller ? VPS ? Cloud Server ? etc ...

    Read the article

  • Will a higher hard drive size affect performance

    - by user273010
    My laptop came with a 500 GB hard drive. I use my laptop for storing my digital photographs, and only have about 14 GB of file storage left on the original hard drive. I have a 750 GB external hard drive, but am leery of relying on it for primary storage as I tend to knock things over and it has already crashed once and I lost a lot of the files. I am looking at a 1 TB internal hard drive, but am concerned if storing so much data will affect the computer's performance. Should I also increase RAM from 4 to 8 GB (the limit for my 64-bit, Windows 7, Asus A54C laptop)?

    Read the article

  • I have static noise in my speakers and headset

    - by Kazarion
    I have been having a problem with my computer where I am constantly getting static from the point I turn on my PC. I have changed Towers, Hard Drives, added and removed a Sound Blaster Xtreme Sound Card, used 3 different Headsets, and 2 sets of speakers. Lately I have noticed random dips in my frame rates when playing games. Is there any possibility that the graphics card could be causing the static with the possibility of it needing to go in for repairs? Specs: i5-3570K 3.40 GHZ Gigabyte GTX 570 8GB of Corsair Ram MB ASUS|P8Z77-V Z77 3TB Seagate Barracude HDD Rosewill 850W PSU Corsair A70 Heatsink

    Read the article

  • sp_releaseapplock timeout expired cause?

    - by Darian Miller
    I've been using a combination of sp_getapplock and sp_releaseapplock for some custom application locking purposes for years now with success and just the last few days I've started to get some timeout expired errors on a sp_releaseapplock which is a bit puzzling. When listing the current locks, there's less than a dozen of these active, and the rest of the dedicated server is way underutilized at the moment (less than 100 batches/sec with a mutli-processor, 32GB Ram, higher end machine.) Is there a specific resource to be monitored that may point me in the right direction for determing why such a lightweight operation is timing out? This is called within a stored proc with a timeout of 120 seconds which seems to be amazingly long for this operation to timeout on. SQL 2000 SP4 running on Windows 2003 Server. TSQL used (@pLockUniqueName is VarChar(255)) EXEC @pLockSuccess = sp_getapplock @pLockUniqueName, 'Exclusive', 'Session', 0 EXEC @pUnLockSuccess = sp_releaseapplock @pLockUniqueName, 'Session' Thanks, Darian

    Read the article

  • Internet Explorer background-color hover problem

    - by danilo
    I have a strange Problem with table formating using IE 7. My table looks like this: In IE, when using border-collapse, the borders don't get displayed correctly. That's why I used this fix: .table-vmlist td { border-top: 1px solid black; } td.col-vm-status, tr.row-details td { border-left: 1px solid black; } td.col-vm-rdp, tr.row-details td { border-right: 1px solid black; } .table-vmlist { border-bottom: 1px solid black;} When hovering over the row, it gets highlighted with CSS: .table-vmlist tr.row-vm { background-color: #A4C3EF; } .table-vmlist tr.row-vm:hover { background-color: #91BAEF; } Now, in IE 7, when moving the mouse from the top to the bottom of the list, every row gets highlighted correctly and no problems happen. But if I move my mouse pointer from the bottom of the list to the top, every second row seems to loose the border. Can someone explain what the problem is, and how to solve it? This is my markup: <tr class="row-vm"> <td class="col-vm-status status-1"><img title="Host Down" alt="Down" src="/Technik/vm-management/img/hoststatus_1.png"></td> <td class="col-vm-name">V1-VM-1</td> <td class="col-vm-stati"> <img title="Ping" alt="Ping status" src="/Technik/vm-management/img/servicestatus_3.png"> <img title="CPU" alt="CPU status" src="/Technik/vm-management/img/servicestatus_3.png"> <img title="RAM" alt="RAM status" src="/Technik/vm-management/img/servicestatus_3.png"> <img title="C:\ Diskspace" alt="Disk space status" src="/Technik/vm-management/img/servicestatus_3.png"> </td> <td class="col-vm-owner">kus</td> <td class="col-vm-purpose">Citrix Testserver</td> <td class="col-vm-ip">-</td> <td class="col-vm-uptime">-</td> <td class="col-vm-rdp">&nbsp;</td> </tr> And the CSS: /* VM-Tabelle formatieren */ .table-vmlist { border-collapse: collapse; } .table-vmlist tr { border: 1px solid black; } .table-vmlist tr.row-header { border: none; } .table-vmlist tr.row-vm { background-color: #A4C3EF; } .table-vmlist tr.row-vm:hover { background-color: #91BAEF; } .table-vmlist th { text-align: left; } .table-vmlist td { } .table-vmlist th, table td { padding: 2px 0px; } /* Spaltenbreite der VM-Tabelle festlegen */ .table-vmlist #col-status { width: 25px; } .table-vmlist #col-stati { width: 90px; } .table-vmlist #col-owner { width: 90px; } .table-vmlist #col-ip { width: 100px; } .table-vmlist #col-uptime { width: 70px; } .table-vmlist #col-rdp { width: 25px; } .table-vmlist tr.row-details td { padding: 0px 10px; } /* Kein Rahmen um verlinkte Bilder */ a img { border-width: 0px; } /* Für Einschaltknopf Hand-Cursor anstatt normalen Pfeil anzeigen */ td.status-1 img { cursor: pointer; } img.ajax-loader { margin-left: 2px; } IE fix: .table-vmlist td { border-top: 1px solid black; } td.col-vm-status, tr.row-details td { border-left: 1px solid black; } td.col-vm-rdp, tr.row-details td { border-right: 1px solid black; } .table-vmlist { border-bottom: 1px solid black;}

    Read the article

  • BSOD constantly with same ntoskrnl.exe error and disk indicator is frozen

    - by Sheep
    BSOD constantly and the disk indicator is frozen. Error do not happen immediately, usually an hour after boot up. Here is the Minidump: Bug Check Code = 0x00000124 Caused By Driver = ntoskrnl.exe Caused By Address = ntoskrnl.exe+4b094c Crash Address = ntoskrnl.exe+4b094c Seems to be hardware problem, but I checked RAM, no error. I have two HDs installed, system is on SSD, data is on HDD. Checked SSD with the properties-tools-error-checking , no error. Re-installed several times, still happens even after removed HDD. Configuration: SSD: Crucial M4-CT064M4SSD2 with Firmware 0009 Intel HM65 CPU: i7-2630QM The SSD is set correctly, SATA III 6Gb/s enabled, and everything worked perfectly for nearly a year.

    Read the article

  • Is there any Mac Pro hardware parts that can ONLY be purchased thru Apple?

    - by bigp
    I'd like to know if I need to be concerned about any hardware parts that I should include in a brand new Mac Pro purchase, instead of trying to hunt it down on 3rd party vendors (or whitelist vendors / hardware suppliers). The main components I'm interested for "upgradeability" are: Processors (If starting with Two 2.4GHz Quad-Core "Westmere"); RAM (If starting with the least possible, which seems to be 6 x 1GB); Video Cards (If starting with one ATI Radeon HD 5770, can a 2nd one be purchased elsewhere?) Hard-Drives (Since these are mounted in specialized trays [if I'm not mistaking], are they also sold elsewhere? And can they be bought as SSDs?) Power Supply (Do I need to be concerned about this at all, or does it auto-adjust depending on the new component upgrades?) I just want to be sure by choosing a Mac Pro with lower component specifications that I can in fact purchase upgrade parts cheaper elsewhere. Thanks!

    Read the article

  • Not able to connect to internet in RHEL 5

    - by chankey007
    I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

    Read the article

  • Not able to connect to internet in RHEL 5

    - by chankey007
    I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

    Read the article

  • Do I really need Microsoft Updates?

    - by Tony Wong
    When I install a fresh copy of Windows XP Home (I bought it from the store.. not a copy), my PC rocks like lightening speed. But when I start installing all the updates, patches & less .NET 4.0 client (as the .NET 4.0 Client seems to bring machine to slow crawl). The PC starts to slow down.. like there are more resources to watch or something is happening in the background. So could I not get away with an awesome virus protector and an awesome firewall set-up and avoid all the patches? The machine I have is a quad 4, 4 GB RAM and 2.3 GHz process. Tons of room and the machine can run several applications at one time.. but when the updates happen.. it's s-l-o-w!

    Read the article

  • How to customize Windows 7 HAL library during installation (BSOD STOP: 0x000000A5)?

    - by koldovsky
    While trying to install Windows 7 x86 Ultimate on Samsung M40 laptop (Pentium M 1.7 Dothan, 2 GB RAM/ 100 GB HDD) i receive BSOD STOP: 0x000000A5: The bios in this system is not fully ACPI compliant. Please contact your system vendor for an updated bios. The bios on the system is updated to latest version. If ACPI is the real source of the issue it means that I possibly could use another HAL library. In Windows XP it is possible to install system with generic HAL library pressing F7 when installer asks to supply drivers, but on Windows 7 I can't find such option. Ironically, Vista installs and works nice, even if they said that Windows 7 is less demanding for hardware. Windows 7 Advisor also tells nothing suspicious. Can anybody tell me how to customize Windows 7 installer to use generic HAL library (if it is possible, of course) or point me to another solution?

    Read the article

  • Windows 7 Slow Searching

    - by Guy Thomas
    I have a new Windows 7 machine with twice as much RAM and a faster processor than my old Windows Server 2008 R2 Machine. I am disappointed that searching amongst my 10,000 image files takes twice as long on my new Windows 7 machine. Both machines have their own copy of these same files. In other respects e.g. opening my huge Outlook files, the new machine is faster. The Windows Search Service has started. And I set indexing on the image folder about 3 days ago. Any ideas why I suffer from this poor index / search experience? Other than adding / removing folders, is there anything I can do to tweak indexing?

    Read the article

  • let mysql use full resources

    - by shekhar
    We have a Windows server 2008 R2. It has 24GB RAM and 2.926 Mhz, 8 Core(s), 8 Logical Process. We have a large MySQL database and it's taking a lot of time to execute some queries. But while running queries, I have observed it's NOT utilizing full resources. I am thinking that if I let MySQL utilize maximum resources on my server, it can reduce execution time. How can I let my MySQL server utilize maximum resources in a healthy way?

    Read the article

  • Unable to diagnose Windows 7 lockup

    - by Delyan
    Basic info: Laptop Dell Studio XPS 13 (Intel P9600, 4GB RAM, NVidia 9400M card, 256G Samsung PM800 SSD) Windows 7 Ultimate, as well as Fedora 14 Here's the deal - Windows would just lock up out of nowhere, no log entries, no dumps, no BSOD, it just freezes. This happens mostly when idle (but it happened when I was using it too) and does not follow a concrete time frame. No input is accepted - only solution is to hold the power button. Although this sounds like a clean cut hardware issue, the reason I'm willing to rule this out is that my primary OS is Fedora 14. It's been working fine for the past 2 years and I've been stress testing the hardware (intentionally or not) every once in a while with no issues. I would like to ask if there's any way to get a diagnostic output from Windows in a situation such as this. The next step in my testing is to leave it in Safe Mode overnight and see if it locks up but even if I do that, I still need to figure out what component freezes it up during normal operation.

    Read the article

  • apache and ajp performance

    - by user12145
    I have an apache sitting in front of two tomcat app servers(one on the same physical server, the other on a different one) that does time consuming work(0.5 sec to 10sec per request). The apache http server is getting killed by an average of 1 to 2 concurrent requests per second. both Server spec is about 2GB of RAM. Is there a way to optimize apache to handle the load? any advise is welcome. BalancerMember ajp://localhost:8009/xxxxxx BalancerMember ajp://XXX.XX.XXX.XX:8009/xxxxxx I keep getting the following in apache2.2 log: [Mon Dec 28 00:31:02 2009] [error] ajp_read_header: ajp_ilink_receive failed [Mon Dec 28 00:31:02 2009] [error] (120006)APR does not understand this error code: proxy: read response failed from 127.0.0.1:8009 (localhost)

    Read the article

  • Ubuntu 12.04 blank screen after login

    - by kgthenerd
    I just installed Ubuntu 12.04 LTS 64 bit on a machine, everything went well accordingly but after login it just gives me a blank screen. During startup after BIOS message it shows "Out of range" error and comes to login window after logon it's just a blank screen. even after somehow it comes to an empty desktop screen i dont see the Unity bar or anything like that (Can change wallpaper, and system setting though). And can't goto Console mode by pressing Ctrl+Alt+F1 - it returns "Out of range" error. System is new AMD Sempron with 2 Gigs of RAM has NVIDIA GeForce 6150SE-based graphic chipset. any ideas on this?

    Read the article

  • Thermal risks to other components when watercooling CPU

    - by B Sharp
    I recently ordered all the components for a new desktop system to replace my old, dying computer. I wanted to have a really quiet desktop, so I got a case rated for being quiet and opted to try a closed-system CPU water cooling kit (Antec Kuhler H2O 620) that was on sale for a very good price over the Thanksgiving weekend. Most of my components are still in transit, but I became somewhat worried when a friend mentioned that abandoning air cooling units can result in heat buildup inside the case due to heat generated by the video card and other components such as RAM, the northbridge, MOSFETs and voltage regulators radiating heat that the CPU fan would normally at least keep circulating around so it doesn't build up in localized areas. Is this a realistic problem? What other precautions should I take to remove heat from other components? Adding more case fans seems like it would get really noisy. Are there quiet alternatives?

    Read the article

  • PHP Script causing high CPU

    - by user20996
    I have a website which is causing me a major headache. There is one PHP script which is using far to much CPU, this only seem to happen when bots hit the site, I dont want to block all the bots because we need them. I have the the process manager output: Pid Owner Priority CPU % Memory % Command 16943 (Trace) (Kill) specialone 0 99.4 1.0 /usr/bin/php /var/www/specialone/page.php I ran strace -p 16943 on the process but it comes up with nothing. We have 2GB of RAM and the php memory_limit is set to 128M which should be enough. The trouble I have is the PHP code is a Framework and the culprit page.php pulls in a lot of other PHP files so I cant debug the PHP. Is there any way of finding out what the script is doing when its using so much CPU which will help me solve it?

    Read the article

  • Best memory-efficient web browser for Ubuntu?

    - by Steve K
    I've installed Ubuntu 10.10 on an old laptop with only 756 MB of RAM, Pentium M 1.6 processor. I'm using Google Chrome 11.0 (dev channel) for web browsing, and it appears to be using up most of my memory and processor time. Does anyone know of a better browser than Chrome on Ubuntu, for an older computer like mine? I'm new to Ubuntu, so there may also be tweaks I can make to my existing system to have it perform better. But right now it's pretty slow when I've got ~5-10 tabs open. Related question: memory-efficient web-browser

    Read the article

  • low speed web application, Server problem or Application

    - by Ashian
    Hi, I have a web application written by asp.net (c#) sql server 2005. we host it on 2 dedicated server ( IIS and SQL server ) From some month ago , in some days of week we have many reports about speed issue. we have some other application on this server using same database. when we have speed problem all aplication on these server have this problem, but applications on other server in same data center work correctly. ram and cpu usage are ok. how can I check that the problem related to internet connection or my application design? which parameters must be checked. Some other information In applications users can upload several files to server , each file up to 3 MB. we use a sql web admin application, on same server that has same problem, this is a standard application which work perfectly on other servers. Thanks

    Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >