configure in - Page 121

Are RSS feeds used? [closed]

- by acidzombie24

I was thinking about implementing RSS feeds on my site. The one thing that came to mind is Are RSS feeds ever used?! I don't use them nor know anyone who does. I know to use them it must be through an rss feed program or built in with the browser. I like my browser clean and i know many ppl dont know how to use/configure their browser. So with my thoughts i deducted that rss are not used 99.9999% of people (thats 4 decimal places which is really saying something). Now twitter on the other hand or even email may be used. But I have doubts about rss feeds. Can anyone give me statistics or change my mind on implementing it? I suspect it would be simple but i dont think i should bother if no one will ever use it. I dont even use SE/SO RSS feeds.

Read the article

FTP over ssh hangs on "Connection established: Waiting for Welcome Message"

- by Siriss

I have looked far and wide and have not quite found the answer. I am running ubuntu 11.10, openssh, and vsftpd. I am trying to configure my FTP to tunnel over ssh. My ssh connection works just fine and I can create the tunnel to my FTP port. When I go to use Filezilla to connect, it hangs at "Waiting for Welcome Message". I think it is an iptables issue, but I can't seem to figure out what needs to be changed. When I take iptables down, it connects just fine. I don't want to open any more external ports, just my one SSH port, and I can't seem to get it right on the internal port forwarding rule. I always end up opening it to the outside. I would love some help if anyone has any ideas and I hope I have made it clear. Thank you in advance!!

Read the article

Can an app in opt/extras install themeable icons in /usr/share

- by Peter Levi

My application Variety Wallpaper Changer runs from /opt/extras and uses an indicator icon. I would like to make this indicator icon theme-specific. As far as I understand the standard way is to install named icons into /usr/share/icons with xdg-icon-resource at installation time (Am I right about this?). I have two questions regarding this: Variety installs and runs from /opt/extras.ubuntu.com. Is it acceptable for it to install icons in /usr/share using xdg-icon-resource or is there something else I can do to have theme-specific icons without special-casing themes and dynamically selecting the icon in the code? Variety is packaged using Quickly (and I'm myself a newbie at packaging) - how can I configure it to install theme-specific named icons at installation time?

Read the article

Oracle BI Publisher integration Guidelines published

- by Anthony Shorten

The Oracle Utilities Application Framework integrates with Oracle BI Publisher 10g/11g to allow reports to be submitted and viewed within the Oracle Utilities Application Framework based product. The integration is achieved using base provided algorithms that perform the integration from within the Oracle Utilities Application Framework based product. A new whitepaper has been released that outlines how to configure the algorithm for integration and also some guidelines on how to define a new report to the product for submission and viewing. The whitepaper is available from My Oracle Support at KB Id 1299732.1 titled “BI Publisher Guidelines for Oracle Utilities Application Framework”.

Read the article

How do I get rid of the drive mount confirmation question for sshFS on boot?

- by Dave M G

With help from this site, I was able to set up an SSHFS connection between two computers on my LAN so that one auto mounts on the other at boot time. Everything works, but there is this annoying confirmation that comes up whenever I boot: An error occurred while mounting /home/dave/Mythbuntu. Press S to skip mounting or M or Manual recovery If I press S, then booting continues, and my drive is mounted as hoped, so it seems like even though I "skipped" it, maybe it tried again and succeeded later in the boot process. I followed the instructions here to set up "if up / if down" scripts, and here is my current /etc/fstab: sshfs#[email protected]:/home/mythbuntu /home/dave/Mythbuntu fuse auto,users,exec,uid=1000,gid=1000,allow_other,reconnect,transform_symlinks,BatchMode=yes 0 0 Although the mounting is working, this step of having to press S every time I boot is obviously kind of a hassle. How do I configure my computer so I don't have to do that, and so that my other computer will still automount?

Read the article

not start the cron (scheduler) service

- by user74730

A have problem witch Natty Narwhal uname -r 2.6.38-15-generic. After update cron is not starting. ps aux | grep [c]ron -- none :( ls -la /etc/ | grep crontab -rw-r--r-- 1 root root 724 2011-01-05 13:22 crontab apt-get install --reinstall cron && dpkg --configure -a && service cron restart ps aux | grep [c]ron -- none :( chkconfig --list|grep cron anacron 0:off 1:off 2:on 3:on 4:on 5:on 6:off cron 0:off 1:off 2:on 3:on 4:on 5:on 6:off How-to repair this problem?

Read the article

New White Papers Available

- by mattande

New Master Data Services white papers are now available on MSDN. For an application-agnostic overview of Master Data Management, see Organizational Approaches to Master Data Management . For the steps needed to configure Master Data Services to work with a SharePoint workflow, see SharePoint Workflow Integration with Master Data Services . Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!...(read more)

Read the article

Field Trip Automatically Alerts You to Local Places of Interest

- by Jason Fitzpatrick

Android: Field Trip is a free mobile app that acts like a local tour guide, alerting you to landmarks, historical sites, and unique local attractions. A simple walk around your city’s down town can turn into a history lesson or lead to the discovery of a new hang out. To use Field Trip simply install it on your GPS-enabled Android smartphone and start it up. You can configure the app to notify you of certain types of things (historic places, outdoor art, food and drink, and more), refine the results over time by telling the app which tidbits you enjoyed, and more. Field Trip even has a driving mode where you can turn it on and, as you drive through a city or across the countryside, it will narrate your journey by telling you about interesting sites you’re passing. Field Trip is free, Android only. Hit up the link below to take it for a spin. Field Trip [via Geek News Central] 8 Deadly Commands You Should Never Run on Linux 14 Special Google Searches That Show Instant Answers How To Create a Customized Windows 7 Installation Disc With Integrated Updates

Read the article

Remote GDM login

- by luri

Is it possible to remotely (via ssh) make a login to GDM? I'll explain a situation in which I'd need this: I'm on my laptop and connect to my desktop via ssh. I realize there are some updates available. I install them all, but I need to reboot the computer. The problem is that once the desktop has rebooted, there will be no GDM session available, since it's necessary to log in. Can I somehow perform the GDM login remotely from my laptop? Edit: I can't find FreeNX for Maverick, and I haven't been able to configure x11vnc + vncviewer to work. Isn't there an easy way?

Read the article

LIRC-ZILOG on ubuntu 12.04

- by aoman

I followed these guides to configure a Hauppauge PVR, and after compiling the hpvr modules, I have this problem: (that also includes the zilog one) # locate zilog /lib/modules/3.2.0-29-generic/kernel/drivers/staging/media/lirc/lirc_zilog.ko /lib/modules/3.2.0-34-generic/kernel/drivers/staging/media/lirc/lirc_zilog.ko /usr/src/linux-headers-3.2.0-29-generic/include/config/lirc/zilog.h sudo modprobe lirc_zilog FATAL: Error inserting lirc_zilog (/lib/modules/3.2.0-34-generic/kernel/drivers/staging/media/lirc/lirc_zilog.ko): Invalid argument The PVR works and I can get a test video with sound. The remote does not. I want the transmitter to work so it can automatically change the channel on the cable box and find the video I wanted to record. The LIRC sources are not on Ubuntu sources and so I can only guess at what commands I might have to use. How do I resolve the error and get the remote working?

Read the article

while installing kde 4.11 through terminal showing error while 'processing initramfs-tools'

- by saptarshi nag

the full output is------- Setting up initramfs-tools (0.103ubuntu0.2.1) ... update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.5.0-42-generic cp: cannot stat ‘/module-files.d/libpango1.0-0.modules’: No such file or directory cp: cannot stat ‘/modules/pango-basic-fc.so’: No such file or directory E: /usr/share/initramfs-tools/hooks/plymouth failed with return 1. update-initramfs: failed for /boot/initrd.img-3.5.0-42-generic with 1. dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools E: Sub-process /usr/bin/dpkg returned an error code (1)

Read the article

Configuring bind9 views so I can have DNS services?

- by Cesar Downs

I want to configure bind9 using the Ubuntu terminal to have the DNS resolve a local name, not a domain name. For example, if I type in Nicole it will resolve my IP address in a local network fashion. How can I do this, step-by-step please? I've already installed bind9 using: sudo apt-get install bind9 It's fully installed now, I just need some help configuring. Should I be using local views? I am going to do the connection with two laptops probably connected to each other by Ethernet cable or WIFI. One of them is running Ubuntu and the other is running Windows. I not sure if that's part of the problem.

Read the article

Guide to particulars in customizing Ubuntu Installer

- by Oxwivi

I've tried reading through guides for preseeding and customization, but I did not understand how and where to modify which options. I can only comfortably learn through practical examples, for which I ask this question. I am looking into preseeding and customizing solution to just do a few specific tasks: Completely rewrite the packages installed by default, much like minimal installs and with the --no-install-recommends flag of apt-get. Add a few proprietary applications to the default install list Automatically install and mount proprietary drivers on install and live session Edit the default configuration files for applications installed by default Specify partitions along with permission Modify the package pool in the installer media (CD/DVD/USB), preferably using command line tools similar to apt-get and aptitude. Can anyone please tell me how to configure preseed option to only do the above? NB I do not understand the GPG part after adding/removing packages in the pool. PS The third point is of particular importance.

Read the article

301 redirects in main navigation menu of WordPress website - is this okay for SEO?

- by Lewis Bassett

I want to allow a client to have a flexible way to configure the navigation menu for his WordPress website. To that end, I have created a parent page called "Navigation", which has child pages for each page to be displayed in the navigation menu. Those pages then get 301 redirected to the actual page that should be served. This means the client can create pages freely, and then set up redirects for them as and when needed. This is a really easy way for him to manage his main menu and it works well. From an SEO point of view, is this okay? Will the pages be indexed fine?

Read the article

How do I install the Intel Graphics driver in my system?

- by John

Can someone help me out and explain or point me in the right direction on how to check video drivers and see if my video card running okay? I had 10.04 installed on my Thinkpad r61 with Compiz Manager and life was great, until the machine took water damage. I bought an ASUS (X54H) since and am trying out 12.04, but the desktop just doesn't look right. I always struggled with video driver installation. There are no proprietary drivers available in the hardware manager. When I run lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) I will greatly appreciate your help. I want to use Linux more, but like I said video drivers appear to be my biggest concern. I have also tried 12.04 on my desktop PC, but again failed to configure video card, so switched back to Windows 7.

Read the article

www.IISJobs.com has been launched.

- by steve schofield

Looking for a job related to Microsoft (Internet Information Server)? Or do you have a job opening which requires IIS experience. Look no further, subscribe to the discussion forum today at http://www.iisjobs.com and be notified as soon as a job is posted or someone responds. Why start IISJobs.com? I'm not looking to replace Monster, Careers.com. I've seen in various places where jobs involving Microsoft IIS (Internet Information Server) have been posted. I thought it would be a good idea to centralize under a easy to remember domain name. :) My goal is to help the IIS community. Cheers, Steve SchofieldWindows Server MVP - IIShttp://weblogs.asp.net/steveschofield http://www.IISLogs.comLog archival solutionInstall, Configure, Forget

Read the article

How to disable DisplayInfo for Intel i810 when there is no xorg.conf

- by user86954

I'm testing Ubuntu 12.04 on an office desktop. This machine has an integrated Intel i810. This very machine used to run Ubuntu (or kubuntu) quite well, until the natty narwhal release, when the xserver started freezing. This seems to be caused by an issue with a call to the video bios, which can be circumvented by disabling the option DisplayInfo. I tried creating an xorg.conf by using Xorg -configure, but it produced an error after trying to make a file. I did have a file, and I put it in /etc/X11 with DisplayInfo false (maybe it wants "disabled"?), but it wouldn't boot at all until I removed that xorg.conf. There is no 10-monitor.conf file either. All I want to do is set the appropriate option so that my intel display doesn't freeze. Is there any other way I can disable the DisplayInfo? Andrew

Read the article

How to restore GRUB without re-installing the OS?

- by Calixte

A friend of mine has a Packard Bell laptop that came with Windows pre-installed. I installed Ubuntu on it and it works fine, but everytime she tried to boot Windows on it (fortunately rarely) it fails and the computer is unable to boot any OS anymore. Upon boot, the computer stops on a black screen with a GRUB Rescue prompt. Is there any way to restore GRUB without re-installing Ubuntu? (preferably an easy way as I cannot do it for her and she is not extremely computer literate) Also (but less important), is there a way to configure GRUB (or something else) so that Windows won't destroy it on every boot attempt?

Read the article

Profiling Startup Of VS2012 – YourKit Profiler

- by Alois Kraus

The YourKit (v7.0.5) profiler is interesting in terms of price (79€ single place license, 409€ + 1 year support and upgrades) and feature set. You do get a performance and memory profiler in one package for which you normally need also to pay extra from the other vendors. As an interesting side note the profiler UI is written in Java because they do also sell Java profilers with the same feature set. To get all methods of a VS startup you need first to configure it to include System* in the profiled methods and you need to configure * to measure wall clock time. By default it does record only CPU times which allows you to optimize CPU hungry operations. But you will never see a Thread.Sleep(10000) in the profiler blocking the UI in this mode. It can profile as all others processes started from within the profiler but it can also profile the next or all started processes. As usual it can profile in sampling and tracing mode. But since it is a memory profiler as well it does by default also record all object allocations > 1MB. With allocation recording enabled VS2012 did crash but without allocation recording there were no problems. The CPU tab contains the time line of the application and when you click in the graph you the call stacks of all threads at this time. This is really a nice feature. When you select a time region you the CPU Usage estimation for this time window. I have seen many applications consuming 100% CPU only because they did create garbage like crazy. For this is the Garbage Collection tab interesting in conjunction with a time range. This view is like the CPU table only that the CPU graph (green) is missing. All relevant information except for GCs/s is already visible in the CPU tab. Very handy to pinpoint excessive GC or CPU bound issues. The Threads tab does show the thread names and their lifetime. This is useful to see thread interactions or which thread is hottest in terms of CPU consumption. On the CPU tab the call tree does exist in a merged and thread specific view. When you click on a method you get below a list of all called methods. There you can sort for methods with a high own time which are worth optimizing. In the Method List you can select which scope you want to see. Back Traces are the methods which did call you. Callees ist the list of methods called directly or indirectly by your method as a flat list. This is not a call stack but still very useful to see which methods were slow so you can see the “root” cause quite quickly without the need to click trough long call stacks. The last view Merged Calles is a call stacked view of the previous view. This does help a lot to understand did call each method at run time. You would get the same view with a debugger for one call invocation but here you get the full statistics (invocation count) as well. Since YourKit is also a memory profiler you can directly see which objects you have on your managed heap and which objects do hold most of your precious memory. You can in in the Object Explorer view also examine the contents of your objects (strings or whatsoever) to get a better understanding which objects where potentially allocating this stuff. YourKit is a very easy to use combined memory and performance profiler in one product. The unbeatable single license price makes it very attractive to straightly buy it. Although it is a Java UI it is very responsive and the memory consumption is considerably lower compared to dotTrace and ANTS profiler. What I do really like is to start the YourKit ui and then start the processes I want to profile as usual. There is no need to alter your own application code to be able to inject a profiler into your new started processes. For performance and memory profiling you can simply select the process you want to investigate from the list of started processes. That's the way I like to use profilers. Just get out of the way and let the application run without any special preparations. Next: Telerik JustTrace

Read the article

Webhosting with custom database choice [closed]

- by churchill614

Possible Duplicate: How to find web hosting that meets my requirements? I am trying to find somewhere to host a website which uses OrientDB as its database. My budget doesn't stretch to a dedicated server where I can configure everything as I need it. Rather, I am hoping to find somewhere, ideally UK based, that will allow me to install/install for me OrientDB on their server, that is of the normal shared server variety. Is anybody able to point me in a good direction for this please (whilst UK is preferable it is not essential)?

Read the article

How to use different php.ini files for different VirtualHosts?

- by gsingh2011

I have my site and it's staging subdomain running on the same CentOS machine running apache. The subdomain is created using a VirtualHost, and I use it to find any bugs before I push to production. I want the php.ini file for the staging VirtualHost to be a development one, and the production site will use a production php.ini. How can I configure apache to use different php.ini files? I don't want to use php_value/php_flag for everything, I'd rather just use the php.ini file I already have available. I've tried creating an .htaccess file that looks like this, SetEnv PHPRC /path/to/php.ini/directory This has no effect, as phpinfo() tells me it's still using /etc/php.ini. I've also tried setting PHPIniDir for both virtual hosts (www and staging) and it complains about seeing the directive twice.

Read the article

How do I get rid of this drive mount confirmation question when booting the computer?

- by Dave M G

With help from this site, I was able to set up an SSHFS connection between two computers on my LAN so that one auto mounts on the other at boot time. Everything works, but there is this annoying confirmation that comes up whenever I boot: An error occurred while mounting /home/dave/Mythbuntu. Press S to skip mounting or M or Manual recovery If I press S, then booting continues, and my drive is mounted as hoped, so it seems like even though I "skipped" it, maybe it tried again and succeeded later in the boot process. I followed the instructions here to set up "if up / if down" scripts, and here is my current /etc/fstab: sshfs#[email protected]:/home/mythbuntu /home/dave/Mythbuntu fuse auto,users,exec,uid=1000,gid=1000,allow_other,reconnect,transform_symlinks,BatchMode=yes 0 0 Although the mounting is working, this step of having to press S every time I boot is obviously kind of a hassle. How do I configure my computer so I don't have to do that, and so that my other computer will still automount?

Read the article

Switching windows behavior in Ubuntu

- by Leonid

Ubuntu supports a shortcut to switch windows Ctrl+Tab, but it allows you to move through apps in one direction only. Direction depends on whether initially Ctrl+Tab or Ctrl+Shift+Tab was pressed. Ctrl+Tab will move forwards, but pressing Shift while moving forward doesn't change the direction, it still goes forwards unlike Windows default behaviour. Ctrl+Shift+Tab will move backwards, but if Shift is released while moving backwards the menu will disappear. Is there a way to configure Ubuntu so that you could go backwards and forwards without running the menu twice?

Read the article

What are the correct settings for a subdomain in ZoneEdit?

- by user99572_is_fine

I want to create a subdomain for a site hosted by Jimdo (a DIY website builder). Jimdo does not allow subdomains however. I am trying to find a workaround where a subdomain is hosted elsewhere but everything else remains as it is. E.g. I use their email service and I want to keep it. The domain is not hosted by Jimdo, but by a host that allows me to edit my zones. It points to the Jimdo NS. I have independent hosting where I have NS information. This is where I want to host my subdomain. My thinking was that I could use ZoneEdit as a "fork" that allows me to keep using my Jimdo page like before and, at the same time, directs a subdomain to another host. Provided this is possible: Question: How do I configure ZoneEdit CNAME or NS records to forward visitors to my website and my email to my Jimdo mail account while pointing a subdomain to another host?

Search Results

Search found 7776 results on 312 pages for 'configure in'.

Page 121/312 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128 | Next Page >

- by acidzombie24

- by Siriss

- by Peter Levi

- by Anthony Shorten

- by Dave M G

- by user74730

- by mattande

- by Jason Fitzpatrick

- by luri

- by aoman

- by saptarshi nag

- by Cesar Downs

- by Oxwivi

- by Lewis Bassett

- by John

- by Glynn Foster

- by steve schofield

- by user86954

- by Calixte

- by Alois Kraus

- by churchill614

- by gsingh2011

- by Dave M G

- by Leonid

- by user99572_is_fine

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128 | Next Page >