Search Results

Search found 3898 results on 156 pages for 'daniel straight'.

Page 121/156 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

• Custom flash uploader breaks only on Media Temple

  - by LaserWolf

  I've built a flash uploader to upload files up to 100MB using a php backend. It works wonderfully on our dev server, on a hostgator vps, and on one of our clients' servers running Debian. It will not work on our Media Temple (dv)3.5 and I don't know why. The upload will start but will choke after a few seconds with this flash error message: ioerror: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2038: File I/O Error. URL: http://..._upload.php"] The problem seems to be specific to the asynchronous nature of the flash uploader because if I try a straight php upload it works fine. The php.ini settings are set to allow such a large upload as well. Also, I've thoroughly googled flash, 2038, I/O error, etc but have yet to find anything that helped. Here's the weird part though: We work in Seattle. It won't work from the office. It won't work from home. But, while on the phone with MT's support, they were able to upload a file through our flash uploader just fine. I'm not sure where his office was located but I think it was Atlanta. So the problem also seems specific to physical location. Has anyone run into this sort of problem before?

  Read the article

• Populating a drive that was formated to ntsf on seperate computer

  - by Will Love

  I recently downloaded some files that were over 4gb and wouldnt do a straight transfer to a external hd. this is all being done on a serperate computer we shall call computer1. my computer(computer2) is where im trying to get the files too. i used cmd to "Soft format" the drive to NTSF on computer1 so i could then take the drive to transfer the files to computer2. this was suppose to allow the format change without losing the files i had on there already... after the proccess was done i checked the drive on computer1 and all the old files were there and working....when i took the drive back to computer2 to transfer the files i had just downloaded from computer2 my computer...computer1:wont reconize or populate the external drive so it can give it a drive letter and function. the external drive works fine on computer1, but how do i get it to work again on computer2? when i try to populate it, i cant access the properties function in order to make permissions for everyone so it is reconized....any help would be greatfull..... also i am running windows 7 ultimate edition if that helps.

  Read the article

• How quickly toggle smart quotes in Word 2010?

  - by KnowItAllWannabe

  I'm working on a long technical document that contains numerous displays of computer code. In running text, I want my quotation marks to be curly, which means that Word's "smart quotes" autoformatting-as-I-type feature is one I want on. But in code displays, curly quotes are incorrect, so in these cases, I want smart-quotes-as-I-type disabled. Is there a fast way to toggle this setting? Or is there a way I can tie it to the paragraph style I'm in? (I use a distinct style for code displays.) Currently, to toggle the setting, I have to click FileOptionsProofingAutoCorrect Options..."Straight quotes" with "smart quotes"OKOK, which is seven mouse clicks. Toggling it back is another seven mouse clicks. Isn't there a faster way? A keyhboard shortcut to do the toggling or a toolbar button that would toggle it with a single click would be great. Having the setting depend on the paragraph style I was in would be even better.

  Read the article

• Disk IO slow on ESXi, even slower on a VM (freeNAS + iSCSI)

  - by varesa

  I have a server with ESXi 5 and iSCSI attached network storage(4x1Tb Raid-Z on freenas 8.0.4). Those two machines are connected to each other with Gigabit ethernet. The raid-z volume is divided into three parts: two zvols, shared with iscsi, and one directly on top of zfs, shared with nfs and similar. I ssh'd into the freeNAS box, and did some testing on the disks. I used ddto test the third part of the disks (straight on top of ZFS). I copied a 4GB (2x the amount of RAM) block from /dev/zero to the disk, and the speed was 80MB/s. Other of the iSCSI shared zvols is a datastore for the ESXi. I did similar test with time dd .. there. Since the dd there did not give the speed, I divided the amount of data transfered by the time show by time. The result was around 30-40 MB/s. Thats about half of the speed from the freeNAS host! Then I tested the IO on a VM running on the same ESXi host. The VM was a light CentOS 6.0 machine, which was not really doing anything else at that time. There were no other VMs running on the server at the time, and the other two "parts" of the disk array were not used. A similar dd test gave me result of about 15-20 MB/s. That is again about half of the result on a lower level! Of course the is some overhead in raid-z - zfs - zvolume - iSCSI - VMFS - VM, but I don't expect it to be that big. I belive there must be something wrong in my system. I have heard about bad performance of freeNAS's iSCSI, is that it? I have not managed to get any other "big" SAN OS to run on the box (NexentaSTOR, openfiler). Can you see any obvious problems with my setup?

  Read the article

• How to get my W2003-server (back) into the web (after setting up bridged networking)

  - by MBaas

  I have recently set up Virtualbox on a W2003-Server (which is also used as webserver, accessed from the web). My vbox worked nicely, but then I wanted more, I wanted to have the vm appear in the intranet like any ordinary pc. I was advised to setup bridged networking as opposed to NAT. I did so, and in the server's network connections have bridged the LAN-Connection and the "VirtualBox Host-Only Network" (yes, it says "host only network", but I assure that VBox networking is configured to use network bridge). So now my VM is visible in the intranet and it also has www-accesss, the server can also access the web. The only problem that came up is that the server is no longer accessible from the web. I've traced an HTTP-Request and it says "Can't connect to *:80 (connect: No route to host)". So maybe something in the router's config needs to be adjusted (yeah, well, the server's IP-Address changed from 192.168.1.199 to ...198). So I went into the router-config, reviewed port-forwarding for port 80 and adjusted the IP there, but it still didn't work. Unsure if it was a router-problem or rather something in the server's config, I've setup a "demilitarized zone" in the router and have put the server into it. (My understanding is that this would put the server straight into the web...) But the result of the HTTP-Requests is still the same :(

  Read the article

• Unable to connect to CopSSH when running Windows service, works when running sshd directly

  - by Joe Enos

  I've been using CopSSH (that uses OpenSSH and Cygwin, so I don't know which of the three is the problem) as my SSH server application at home on Windows 7 Ultimate 32 bit. I have used it for about a year with no real problems, other than it sometimes takes 2 or 3 connection attempts to get through, but it's always worked within a few attempts. A few days ago, it just stopped working. The Windows service is still running, and I've rebooted, restarted the service, etc. with no change. On the client (using Putty on Windows), I get the message "Software caused connection abort". On the server, my event viewer registers the following: fatal: Write failed: Socket operation on non-socket I finally got it working, but only by executing sshd.exe directly from the command line on the server. No special flags or options, just straight execution, and then when I connect remotely, it goes through. I do have firewall and anti-virus software which appears to be configured properly, but the fact that things work when running sshd.exe also indicates that the firewall is fine. I thought the service and executable did exactly the same thing, but apparently there's some difference. Does anyone have any ideas on where I should look for the problem? If I can't find something, I suppose I can write a Windows service or scheduled task that fires off sshd.exe directly and ensures that it stays running, but that's kind of a last resort, since it's just wrapping around something that should already work. I appreciate your help.

  Read the article

• Apache 2.4, Ubuntu 12.04 Forbidden Errors

  - by tubaguy50035

  I just installed Apache 2.4 today, and I'm having some issues getting vhost configuration to work correctly. Below is the vhost conf <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /hosting/Client/site.com/www ServerName site.com ServerAlias www.site.com <Directory "/hosting/Client/site.com/www"> Options +Indexes +FollowSymLinks Order allow,deny Allow from all </Directory> DirectoryIndex index.html </VirtualHost> There is an index.html file in /hosting/Client/site.com/www. When I go to the site, I receive a 403 forbidden error. The www-data group is the group on the www folder, which I've already given all permissions (r/w/x). I'm really at a loss as to why this is happening. Any thoughts? If I remove the vhost and go straight to the IP address, I get the default, "It works!" page. So I know that it's working. The error log says "client denied by server configuration". apache2ctl -S dump: nick@server:~$ apache2ctl -S /usr/sbin/apache2ctl: 87: ulimit: error setting limit (Operation not permitted) VirtualHost configuration: *:80 is a NameVirtualHost default server site.com (/etc/apache2/sites-enabled/site.com.conf:1) port 80 namevhost site.com (/etc/apache2/sites-enabled/site.com.conf:1) alias www.site.com port 80 namevhost site.com (/etc/apache2/sites-enabled/site.com.conf:1) alias www.site.com ServerRoot: "/etc/apache2" Main DocumentRoot: "/var/www" Main ErrorLog: "/var/log/apache2/error.log" Mutex watchdog-callback: using_defaults Mutex default: dir="/var/lock/apache2" mechanism=fcntl Mutex mpm-accept: using_defaults PidFile: "/var/run/apache2.pid" Define: DUMP_VHOSTS Define: DUMP_RUN_CFG Define: ENALBLE_USR_LIB_CGI_BIN User: name="www-data" id=33 not_used Group: name="www-data" id=33 not_used Ouput of namei -mo /hosting/Client/site/www/index.html f: /hosting/Client/site.com/www/index.html drwxr-xr-x root root / drwxr-xr-x root root hosting drwxr-xr-x root root Client drwxr-xr-x nick www-data site.com drwxr-xr-x nick www-data www -rw-rwxr-x nick www-data index.html

  Read the article

• How to send T.38 from a mac?

  - by Brian Postow

  I'm trying to set up a fax-server on a macintosh. I have Hylafax, and we're going to use an internet FOIP fax provider (Haven't decided who yet, that may be another question). The problem is how to get from Hylafax to T.38. I know of two options, but I'm not sure how to decide between them: T38modem Advantages: It's only one extra program, and i know that I can compile it for the Mac. (well, At least I can get the H323 version working on a Mac) Disadvantages: It is mostly undocumented and seems to be supported only by one guy in Russia. IAXModem/Asterisk Advantages: It's well known, and well supported. We can pay for support. It presumably does the T38 with SIP correctly, so we don't have to worry about it. Disadvantages: It's two separate programs. While I know how to get Asterisk on a mac, I'm not sure about IAXModem. (It's sourceforge, and linux, but compiling things for a mac isn't always straight forward...) It's also mostly undocumented. Do these seem like an accurate listing of the pros/cons? Anyone have any other suggestions? thanks.

  Read the article

• How can I tell if a replacement display is compatible with my laptop?

  - by moraleida

  I have an Acer Aspire 4810TZ from 2010 which I truly love - it's a 3 year old notebook that still carries on for about 5 to 6h straight off the battery. I've also invested in it with an SSD and extra RAM and it's fine for my use right now. I'd really rather not just dump it. Now... its screen is dead and I'm looking for replacement parts, but it turns out to be a kind of expensive display - AUO B140XW02 14" LED. US$ 125 was the cheapest I found here (Rio de Janeiro, Brazil). The official dealer sells them for US$ 175. I'm aware of How do I know if a LCD is compatible with my Laptop? and Can I replace a laptop screen with one of a different resolution? but the answers don't really help me in this case. Also Replacing an LCD screen in a laptop gives me a hint but I'm completely dumb at hardware so this is why i'm asking: Is it possible to buy an LCD or a lower grade LED screen with the same connectors? What characteristics should I look for to find out if a certain display is compatible?

  Read the article

• Windows 7 keeps insisting that it needs to check disk for consistency, but never does

  - by Mike

  Lately Windows 7 has been telling me that I need to check disk D: for consistency. This happens more than 50% of the time when booting up. The first time, I didn't touch anything so that it would go ahead and do its scan. It didn't seem to do anything - just booted straight into Windows. The second time I tried to skip it by pressing any key. It ignored all of my keystrokes and still counted down to 0 (then skipped the disk check). Sometimes, it gets down to 0 but then just hangs... no indication that anything is going on. This is happening on a < 3 month old laptop. C: and D: are on the same physical disk - just two partitions. I never get any notification that C: needs to be checked for consistency. It's a ~300GB HD. C: has 60gb (32gb free) and D: has ~240GB (122gb free). What could be causing this to keep coming up? What can I do to fix it? Thanks!

  Read the article

• SSL stops working on IIS7 after a reboot

  - by Mark Seemann

  I have a Windows 2008 Server with IIS7. Every time the server reboots, SSL stops working. Normal HTTP requests work fine, but any request to an HTTPS address gives the typical error message in the browser: Cannot find server or DNS I can temporarily fix it by opening IIS Manager and bring up the Bindings… window for the website in question. Then I select “https”, click on “Edit” then click “Ok” without making any changes to the settings. After doing this, browsing to https:// works again until the next reboot. This issue look as lot like the one described here, but according to the Certificates MMC snapin, the certificate in question does have a private key. I'm also pretty sure that I never installed the certificate in the personal store, but imported it straight into the machine store, but it's been a while... There's not a lot in the event log apart from the event ID 36870 also described in the post I linked to. Can anyone help me troubleshoot this issue so that SSL will work even after a server reboot?

  Read the article

• What are the attack vectors for passwords sent over http?

  - by KevinM

  I am trying to convince a customer to pay for SSL for a web site that requires login. I want to make sure I correctly understand the major scenarios in which someone can see the passwords that are being sent. My understanding is that at any of the hops along the way can use a packet analyzer to view what is being sent. This seems to require that any hacker (or their malware/botnet) be on the same subnet as any of the hops the packet takes to arrive at its destination. Is that right? Assuming some flavor of this subnet requirement holds true, do I need to worry about all the hops or just the first one? The first one I can obviously worry about if they're on a public Wifi network since anyone could be listening in. Should I be worried about what's going on in subnets that packets will travel across outside this? I don't know a ton about network traffic, but I would assume it's flowing through data centers of major carriers and there's not a lot of juicy attack vectors there, but please correct me if I am wrong. Are there other vectors to be worried about outside of someone listening with a packet analyzer? I am a networking and security noob, so please feel free to set me straight if I am using the wrong terminology in any of this.

  Read the article

• Slow File Copy observed copying 40GB files across network to iSCSI device

  - by Rick

  Here's a curious ones for the gurus: Setup: Source Machine: Windows Server 2003 R2 machine with local hard drive. VHD file of 40GB. 1 x 1Gbps network card, Cat6 cable, switch. Target Machine: Windows Server 2008 R2 machine with iSCSI connection to iSCSI target on separate machine (1TB, RAID5). 1 x 1Gbps network card, Cat6 cable, connected to same switch as for Source Machine. Second 1Gbps network card, Cat6 cable, connected via isolated switch to the iSCSI target. Switches are Netgear JGS524 model (web managed). If I copy from the Win2003R2 machine to Win2008R2 machine local drive I get 40GB in 45 minutes, 36 seconds. If I copy from the Win2008R2 machine to the iSCSI target (local drive to iSCSI target) I get 40GB in 37 minutes 56 seconds. If I copy from the Win2003R2 machine to the iSCSI target via the Win2008R2 machine I get 40GB in 3 hours, 50 minutes, 24 seconds. All copies were done via the following command issued on the Win2008R2 box: XCOPY <source> <target> /J XCOPY /J - Copies using unbuffered I/O. Recommended for very large files. So, what's the bit I'm missing here? Why does a back-to-back copy take in total 1 hour, 23 minutes, 32 seconds when a "straight through" copy take almost 3 times as long? Switches show no errors, network hovers around the 3% utilisation mark for the duration of the copy (whereas the "back-to-back" copies are around the 25% utilisation mark). What have I missed?

  Read the article

• Internet Connection not working - USB LAN connection - from particular modem

  - by Paul

  I am trying to fix Internet connection on a friends Dell inspiron 1720 with XP service pack 3. It has an integrated network card that stopped working, after powering down/up the modem still didnt work I brought it back to my place to try a few things ie check cable, update driver etc... still didnt work. So I bought a USB LAN connector. It didnt work straight away but I went to configure the properties and changed the ConnectionType from AutoSense to 100 BaseT 10BaseT Full_Duplex, I basically just tried them all. From my place when connected to my desktop - 10 BaseT and 10BaseT Full_Duplex worked. From my place When connected to their laptop - 10 BaseT and 10BaseT Full_Duplex worked. Happy I went back to my friends house confident it would all work, and it didnt. Brought it back to mine and it did. While there, in Network Connections the connection is there recognized, enabled, 'working properly' it just says not connected. Also there is no led on the USB connector While at mine as above except there is an led on the USB connector and it says connected. Other difference I can think of is they have a cable modem, I'm plugged into the back of a Belkin wireless router - would this make a difference? Any other ideas what to try? (Would getting the model of the cable modem help anyone?) The USB connector is "DM9601 USB to Fast Ethernet"

  Read the article

• Performance Test and TCP tuning

  - by Mithir

  We are in the process of performance testing an application which receives tcp requests converts them to soap requests (WCF-httpBinding) which other services work on. The server is Windows Server 2008 R2. The TCP requests are received by TcpListener instance (.NET C#). There are 3 http-binded WCF services running on the same server. We have built a performance test client which goal is to simulate multiple concurrent requests(each request has to be different and recognizable by the application). We built a test running 150 requests that run on the same time (by 150 different threads), and we noticed straight away that some requests get the TCP connection slowly, but once they get it, they act fast. A single request writes twice on the same connection- request and an application ack. Although a single request+ack can take about 150ms, the 150 test takes about 7 seconds. The Problem When we try to run this test from 2 different computers we lose requests. some clients requests are getting no connection was made because the target machine actively refused it So I got here and got convinced it was because of the backlog. I changed the TcpListener parameters and did the registry AFD backlog changes written here but it still didn't work, so I inserted all of the TCP tuning suggested plus some netsh commands which were recommended, but still no change, we still get that error. Is there anything else I need to know? Are there any other solutions?

  Read the article

• Running a VM off a USB 2.0 Flash Drive - Mac/Parallels/XP

  - by geerlingguy

  I use a MacBook Air as my primary machine, and the 128GB SSD means space is precious. To save about 10 GB, I've been running Parallels with a Windows XP VM off an external USB hard drive, which performs as well in everyday use as running the VM off the internal SSD. So, I bought a tiny 32GB USB 2.0 flash drive, plugged it into the MacBook Air, formatted it first as ExFAT (which was slow), then as Mac OS Extended (Journaled) (which was also slow), and copied over my VM file, and ran Parallels off it. My full experience is documented here: http://www.midwesternmac.com/blogs/jeff-geerling/running-windows-xp-vm Straight file copies are really fast — 30 MB/sec read (solid the whole time), and 10-11 MB/sec write (solid the whole time). But I noticed that once XP started running, the disk access rates were in the low KB ranges. Are USB flash drives really that poor at random access, or could I possibly be missing something (the format of the flash drive, etc.?)? Of note, I've tried the following, to no great effect: Formatting the drive as either ExFAT or Mac OS Extended (Journaled) Unplugging all other USB devices and turning off Bluetooth (which runs on the right-side-port USB bus). Plugging in the flash drive either direct in the right side port, or the left side port, or into a USB 2.0 hub

  Read the article

• Postfix / Dovecot email setup not storing email

  - by Nick Duffell

  I'm trying to setup postfix / dovecot on my debian server to use it for a mail server. I set everything up according to a tutorial on the net, and it all seemed OK. I can send emails from it, so SMTP is not a problem, however I cannot receive emails. Looking into the files in /home/nick/mail/ I can see that if I send an email to myself (from the server, to itself) the emails are there, but are put straight into the Deleted Messages folder. I don't know why this is. When I send an email from another mail account (not on this server), the emails are nowhere to be found. Also, looking at the log file /var/log/mail.log all seems to be OK, I get the following when I receive an email, which looks OK to me: Nov 7 22:47:22 nickduffell postfix/local[17825]: 05B1173581A6: to=, relay=local, delay=0.37, delays=0.31/0.02/0/0.03, dsn=2.0.0, status=sent (delivered to mailbox) Any ideas? Thanks EDIT: I should also add that although the emails I send myself are in the Deleted Messages folder, and in my mail client I can see that "Trash" has 3 items, I cannot download them in my mail client...

  Read the article

• Windows Task Scheduler fails at sending e-mail

  - by Marki

  The error is 2147746321. I can see in the mailserver log that it tries, but the connection gets closed. Wed 2012-10-10 15:55:25: Session 990590; child 1 Wed 2012-10-10 15:55:25: Accepting SMTP connection from [x:49161] to [y:25] Wed 2012-10-10 15:55:25: --> 220 Mdaemon; Wed, 10 Oct 2012 15:55:25 +0200 Wed 2012-10-10 15:55:25: <-- EHLO x Wed 2012-10-10 15:55:25: --> 250-Hello x, pleased to meet you Wed 2012-10-10 15:55:25: --> 250-VRFY Wed 2012-10-10 15:55:25: --> 250-EXPN Wed 2012-10-10 15:55:25: --> 250-ETRN Wed 2012-10-10 15:55:25: --> 250-AUTH LOGIN Wed 2012-10-10 15:55:25: --> 250-8BITMIME Wed 2012-10-10 15:55:25: --> 250 SIZE 20971000 Wed 2012-10-10 15:55:25: <-- AUTH LOGIN Wed 2012-10-10 15:55:25: --> 334 VX...... Wed 2012-10-10 15:55:25: Connection closed Wed 2012-10-10 15:55:25: SMTP session terminated (Bytes in/out: 26/212) Googling does not reveal much except that it indeed "doesn't work" and Exchange pops up all over the place. This is no Exchange server. I just want a plain and straight SMTP connection to work. How? (I have tried running the task as normal user and as system account, no difference.)

  Read the article

• Windows 7 blank dvi screen

  - by user99

  I've just upgraded to Windows 7 Ultimate 64 bit. I had an issue during installation; after setup rebooted instead of going to the 'Completing installation' screen I just got a blank screen. I eventually(!) figured out that this meant 'un-plug your second monitor to proceed'. When I did this, installation completed in a snap and everything runs fine. However, whenever I plug my second monitor into my PC, it gets no signal, the the primary monitor removes all windows. icons, the taskbar and the cursor just shows the desktop wallpaper. I'm running a GTS8800 512mb, with the latest drivers (197 IIRC). The monitors are identical, and both plug into DVI sockets on the graphics card, the only difference is I connect one using a straight DVI cable and the other using a VGA cable and a VGA-DVI converter. It's the DVI cabled one that has the issues (if I plug it in by itself it gets no signal). Everything was working fine before I upgraded to Windows 7 (I used to run XPSP2). Anyone have any ideas?

  Read the article

• network latency, TCP and UDP packets

  - by user115848

  Hello recently my network has started to cause me lots of problems. I have a cable modem, connected to a tp-link router (with some port forwarding). Everything was working fine then i started to get lots of udp (port 53) "UNREPLIED" logs in the router. Now there are tcp UNREPLIED logs too. This is causing lots of latency and failed connections when trying to connect to different internet sites. Also, we run an openfire server for spark connections, and I believe its causing connectivity issues for some users who are trying to connect using Spark (some people connect fine, others don't). Please see screen shot below for packet logs. It has to be something internally, as I connected straight to the comcast modem and i was able to connect to the internet and various sites as normal. I tried to swap out the router with a different and got the same issue. I scanned both my internal dns servers for viruses or malware and it came up empty. Another anomaly is that when i try to connect to www.cnn.com, i get redirected to the different site. I scanned my own machine for hijacks. Not sure if this is related to the networking issue. Please let me know if you have any ideas for troubleshooting.

  Read the article

• Chrome browser completely messing with network?

  - by kiasecto

  I have a bizare problem with Google Chrome on a intel core i5 running windows 7 32bit. Whenever chrome is installed, access to other computers in the home group becomes really slow - such as opening shares. Its becomes really slow to resolve windows names. Something goes hay-wire with the local network - pining local machines which is usually 0mS pings I get random timeouts and random successes. Whenever I try to load a local address inside of chrome (including localhost, 192.168.0.1 etc) - it always says something in the status bar about resolving proxy and times out after about 5 seconds, then seems to work fine. If I go to settings inside of chrome, it just brings up the internet explorer connection settings, where I have not set any proxy settings. One I uninstall chrome, all these problems go away. Network shares and name resolvings work instantly, pings to any machines never have a problem. Localhost and other network IP address work fine in all other browsers. Anyone heard of this problem before and know what it might be? I even tried re-installing winodws 7 and the problem came straight back when chrome was loaded on again.

  Read the article

• Representing server state with a metric

  - by Sal

  I'm using Microsoft's Performance Monitor to dump logs of RAM, CPU, network, and disk usage from multiple servers. I'd like to get a single metric that captures the state of a given variable to a good extent. For instance, disk usage is pretty stable, so if I take a single reading that says I have 50% remaining disk space, that reading will give me an accurate measure for the day. (The servers aren't doing heavy IO writing.) However, the tricky part here is monitoring CPU and network usage. The logs currently dump the % CPU usage every ten seconds. If I take a straight average of the numbers, it may not represent reality, as % CPU will be much lower during the night than day. (We host websites that sell appliance items.) I'd like to get an average over a span during peak hours (about 5 hours in the day) and present a daily peak hour metric. Of course, there are most likely some readings that will come in as overly spiked (if multiple users pinged the server at once) or no use (a momentary idle state). Is there a standard distribution/test industries use in these situation?

  Read the article

• External USB HD with -optional- mains?

  - by Stephen

  Hi, I'm Christmas-present-buying, and I'd appreciate recommendations for a USB HD with an optional mains power input. I've hunted, but can't find all the information I want (partially due to sketchy product specifications). Background: This is for a digital TV which I do not own, and so I'd like to get it correct first time. The TV has a USB port to allow recording straight to disk, but the manuals don't say how much power can be drawn through the USB port. The manual's instructions state, possibly generically, to plug the drive in before connecting to the TV. Ideally I'd like a small (2.5"?) drive which can draw power over USB, with an mains power input if it turns out the USB port on the TV doesn't offer enough juice. The ideal is to use one cable, two max. A powered USB hub would introduce too much clutter. I've spotted that the LaCie Petit drives have what appears to be an additional power input, but I'm not even sure from the specs what that is. And the device doesn't ship with a mains adapter. Suggestions?

  Read the article

• Free/opensource application for charting stock prices?

  - by Homunculus Reticulli

  I am looking for a free or FOSS software application for SIMPLY charting stock prices. I am not interested in any of the other nonsense typically bundled with such packages (technical analysis, back testing, tracking etc, etc). All I want to do is the following: Import file from CSV and plot on the chart Ability to scroll the chart left/right (zoom feature would be nice to) Ability to draw straight line (between 2 points) on the plot Ability to plot the graph for different resolutions (for e.g weekly, monthly - or some other custom resolution that I want) print the displayed graph (I can always use screen capture if printing is too much to ask) Thats all I want to do. I am not interested in anything else. I would have thought I could have found something by now. I would have written my own tool (I still will do that at a later stage), but I am a bit short of time at the moment, so I just want something that will do all of the above. Can anyone recommend a package. Last but not the least, I am running on Linux (and would prefer to do so - BUT if I have to, I can run on ahem - you know, Windows)

  Read the article

• MAMP Pro .xip.io, fixing urls with htaccess

  - by user3540018

  I've got all my websites set up with MAMP Pro. For instance, I got it set up, so when I go to example.com, the browser displays the website that's set up on my iMac. Now, I wanna get MAMP Pro to work so I can view my website on my other computers/devices (which are all hooked up on the same network.) So far all I had to do is check the checkbox "via Xip.io (LAN only)", and now I can view my website on my other computers/devices within my LAN by simply going to example.com.10.0.1.13.xip.io. Problem is, whenever I'm on this other computer/device, when I click on the links, I get 404 error. ie. whenever I go to example.com/news, I get the 404. But when I go to example.com.10.0.1.13.xip.io/news, THEN I get the right page. So in order to solve my problem I need to rewrite the urls. So whenever someone clicks on a link ie. goes straight to example.com/news, he'll go to example.com.10.0.1.13.xip.io/news. I don't want to change all the links in my MySQL file, but I believe I can do it simply with the htaccess file. I've opened the htaccess file and added the last two lines, but it just doesn't work. <IfModule mod_rewrite.c> RewriteEngine On # Send would-be 404 requests to Craft RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !^/(favicon\.ico|apple-touch-icon.*\.png)$ [NC] RewriteRule (.+) index.php?p=$1 [QSA,L] RewriteCond %{HTTP_HOST} ^example\.com RewriteRule ^(.*)$ http://www.example.com.10.0.1.13.xip.io/$1 [R=permanent,L] </IfModule> Or perhaps I don't need to change the htaccess file, is there something that I could be missing in the MAMP Pro settings, or perhaps a MAMP extension that I need?

  Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >