manual - Page 121 - Developer IT

Bacula & Multiple Tape Devices, and so on

- by Tom O'Connor

Bacula won't make use of 2 tape devices simultaneously. (Search for #-#-# for the TL;DR) A little background, perhaps. In the process of trying to get a decent working backup solution (backing up 20TB ain't cheap, or easy) at $dayjob, we bought a bunch of things to make it work. Firstly, there's a Spectra Logic T50e autochanger, 40 slots of LTO5 goodness, and that robot's got a pair of IBM HH5 Ultrium LTO5 drives, connected via FibreChannel Arbitrated Loop to our backup server. There's the backup server.. A Dell R715 with 2x 16 core AMD 62xx CPUs, and 32GB of RAM. Yummy. That server's got 2 Emulex FCe-12000E cards, and an Intel X520-SR dual port 10GE NIC. We were also sold Commvault Backup (non-NDMP). Here's where it gets really complicated. Spectra Logic and Commvault both sent respective engineers, who set up the library and the software. Commvault was running fine, in so far as the controller was working fine. The Dell server has Ubuntu 12.04 server, and runs the MediaAgent for CommVault, and mounts our BlueArc NAS as NFS to a few mountpoints, like /home, and some stuff in /mnt. When backing up from the NFS mountpoints, we were seeing ~= 290GB/hr throughput. That's CRAP, considering we've got 20-odd TB to get through, in a <48 hour backup window. The rated maximum on the BlueArc is 700MB/s (2460GB/hr), the rated maximum write speed on the tape devices is 140MB/s, per drive, so that's 492GB/hr (or double it, for the total throughput). So, the next step was to benchmark NFS performance with IOzone, and it turns out that we get epic write performance (across 20 threads), and it's like 1.5-2.5TB/hr write, but read performance is fecking hopeless. I couldn't ever get higher than 343GB/hr maximum. So let's assume that the 343GB/hr is a theoretical maximum for read performance on the NAS, then we should in theory be able to get that performance out of a) CommVault, and b) any other backup agent. Not the case. Commvault seems to only ever give me 200-250GB/hr throughput, and out of experimentation, I installed Bacula to see what the state of play there is. If, for example, Bacula gave consistently better performance and speeds than Commvault, then we'd be able to say "**$.$ Refunds Plz $.$**" #-#-# Alas, I found a different problem with Bacula. Commvault seems pretty happy to read from one part of the mountpoint with one thread, and stream that to a Tape device, whilst reading from some other directory with the other thread, and writing to the 2nd drive in the autochanger. I can't for the life of me get Bacula to mount and write to two tape drives simultaneously. Things I've tried: Setting Maximum Concurrent Jobs = 20 in the Director, File and Storage Daemons Setting Prefer Mounted Volumes = no in the Job Definition Setting multiple devices in the Autochanger resource. Documentation seems to be very single-drive centric, and we feel a little like we've strapped a rocket to a hamster, with this one. The majority of example Bacula configurations are for DDS4 drives, manual tape swapping, and FreeBSD or IRIX systems. I should probably add that I'm not too bothered if this isn't possible, but I'd be surprised. I basically want to use Bacula as proof to stick it to the software vendors that they're overpriced ;) I read somewhere that @KyleBrandt has done something similar with a modern Tape solution.. Configuration Files: *bacula-dir.conf* # # Default Bacula Director Configuration file Director { # define myself Name = backuphost-1-dir DIRport = 9101 # where we listen for UA connections QueryFile = "/etc/bacula/scripts/query.sql" WorkingDirectory = "/var/lib/bacula" PidDirectory = "/var/run/bacula" Maximum Concurrent Jobs = 20 Password = "yourekiddingright" # Console password Messages = Daemon DirAddress = 0.0.0.0 #DirAddress = 127.0.0.1 } JobDefs { Name = "DefaultFileJob" Type = Backup Level = Incremental Client = backuphost-1-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = File Messages = Standard Pool = File Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" } JobDefs { Name = "DefaultTapeJob" Type = Backup Level = Incremental Client = backuphost-1-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = "SpectraLogic" Messages = Standard Pool = AllTapes Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" Prefer Mounted Volumes = no } # # Define the main nightly save backup job # By default, this job will back up to disk in /nonexistant/path/to/file/archive/dir Job { Name = "BackupClient1" JobDefs = "DefaultFileJob" } Job { Name = "BackupThisVolume" JobDefs = "DefaultTapeJob" FileSet = "SpecialVolume" } #Job { # Name = "BackupClient2" # Client = backuphost-12-fd # JobDefs = "DefaultJob" #} # Backup the catalog database (after the nightly save) Job { Name = "BackupCatalog" JobDefs = "DefaultFileJob" Level = Full FileSet="Catalog" Schedule = "WeeklyCycleAfterBackup" # This creates an ASCII copy of the catalog # Arguments to make_catalog_backup.pl are: # make_catalog_backup.pl <catalog-name> RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog" # This deletes the copy of the catalog RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup" Write Bootstrap = "/var/lib/bacula/%n.bsr" Priority = 11 # run after main backup } # # Standard Restore template, to be changed by Console program # Only one such job is needed for all Jobs/Clients/Storage ... # Job { Name = "RestoreFiles" Type = Restore Client=backuphost-1-fd FileSet="Full Set" Storage = File Pool = Default Messages = Standard Where = /srv/bacula/restore } FileSet { Name = "SpecialVolume" Include { Options { signature = MD5 } File = /mnt/SpecialVolume } Exclude { File = /var/lib/bacula File = /nonexistant/path/to/file/archive/dir File = /proc File = /tmp File = /.journal File = /.fsck } } # List of files to be backed up FileSet { Name = "Full Set" Include { Options { signature = MD5 } File = /usr/sbin } Exclude { File = /var/lib/bacula File = /nonexistant/path/to/file/archive/dir File = /proc File = /tmp File = /.journal File = /.fsck } } Schedule { Name = "WeeklyCycle" Run = Full 1st sun at 23:05 Run = Differential 2nd-5th sun at 23:05 Run = Incremental mon-sat at 23:05 } # This schedule does the catalog. It starts after the WeeklyCycle Schedule { Name = "WeeklyCycleAfterBackup" Run = Full sun-sat at 23:10 } # This is the backup of the catalog FileSet { Name = "Catalog" Include { Options { signature = MD5 } File = "/var/lib/bacula/bacula.sql" } } # Client (File Services) to backup Client { Name = backuphost-1-fd Address = localhost FDPort = 9102 Catalog = MyCatalog Password = "surelyyourejoking" # password for FileDaemon File Retention = 30 days # 30 days Job Retention = 6 months # six months AutoPrune = yes # Prune expired Jobs/Files } # # Second Client (File Services) to backup # You should change Name, Address, and Password before using # #Client { # Name = backuphost-12-fd # Address = localhost2 # FDPort = 9102 # Catalog = MyCatalog # Password = "i'mnotjokinganddontcallmeshirley" # password for FileDaemon 2 # File Retention = 30 days # 30 days # Job Retention = 6 months # six months # AutoPrune = yes # Prune expired Jobs/Files #} # Definition of file storage device Storage { Name = File # Do not use "localhost" here Address = localhost # N.B. Use a fully qualified name here SDPort = 9103 Password = "lalalalala" Device = FileStorage Media Type = File } Storage { Name = "SpectraLogic" Address = localhost SDPort = 9103 Password = "linkedinmakethebestpasswords" Device = Drive-1 Device = Drive-2 Media Type = LTO5 Autochanger = yes } # Generic catalog service Catalog { Name = MyCatalog # Uncomment the following line if you want the dbi driver # dbdriver = "dbi:sqlite3"; dbaddress = 127.0.0.1; dbport = dbname = "bacula"; DB Address = ""; dbuser = "bacula"; dbpassword = "bbmaster63" } # Reasonable message delivery -- send most everything to email address # and to the console Messages { Name = Standard mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"$Bacula$ \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r" operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"$Bacula$ \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r" mail = root@localhost = all, !skipped operator = root@localhost = mount console = all, !skipped, !saved # # WARNING! the following will create a file that you must cycle from # time to time as it will grow indefinitely. However, it will # also keep all your messages if they scroll off the console. # append = "/var/lib/bacula/log" = all, !skipped catalog = all } # # Message delivery for daemon messages (no job). Messages { Name = Daemon mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"$Bacula$ \<%r\>\" -s \"Bacula daemon message\" %r" mail = root@localhost = all, !skipped console = all, !skipped, !saved append = "/var/lib/bacula/log" = all, !skipped } # Default pool definition Pool { Name = Default Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year } # File Pool definition Pool { Name = File Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year Maximum Volume Bytes = 50G # Limit Volume size to something reasonable Maximum Volumes = 100 # Limit number of Volumes in Pool } Pool { Name = AllTapes Pool Type = Backup Recycle = yes AutoPrune = yes # Prune expired volumes Volume Retention = 31 days # one Moth } # Scratch pool definition Pool { Name = Scratch Pool Type = Backup } # # Restricted console used by tray-monitor to get the status of the director # Console { Name = backuphost-1-mon Password = "LastFMalsostorePasswordsLikeThis" CommandACL = status, .status } bacula-sd.conf # # Default Bacula Storage Daemon Configuration file # Storage { # definition of myself Name = backuphost-1-sd SDPort = 9103 # Director's port WorkingDirectory = "/var/lib/bacula" Pid Directory = "/var/run/bacula" Maximum Concurrent Jobs = 20 SDAddress = 0.0.0.0 # SDAddress = 127.0.0.1 } # # List Directors who are permitted to contact Storage daemon # Director { Name = backuphost-1-dir Password = "passwordslinplaintext" } # # Restricted Director, used by tray-monitor to get the # status of the storage daemon # Director { Name = backuphost-1-mon Password = "totalinsecurityabound" Monitor = yes } Device { Name = FileStorage Media Type = File Archive Device = /srv/bacula/archive LabelMedia = yes; # lets Bacula label unlabeled media Random Access = Yes; AutomaticMount = yes; # when device opened, read it RemovableMedia = no; AlwaysOpen = no; } Autochanger { Name = SpectraLogic Device = Drive-1 Device = Drive-2 Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" Changer Device = /dev/sg4 } Device { Name = Drive-1 Drive Index = 0 Archive Device = /dev/nst0 Changer Device = /dev/sg4 Media Type = LTO5 AutoChanger = yes RemovableMedia = yes; AutomaticMount = yes; AlwaysOpen = yes; RandomAccess = no; LabelMedia = yes } Device { Name = Drive-2 Drive Index = 1 Archive Device = /dev/nst1 Changer Device = /dev/sg4 Media Type = LTO5 AutoChanger = yes RemovableMedia = yes; AutomaticMount = yes; AlwaysOpen = yes; RandomAccess = no; LabelMedia = yes } # # Send all messages to the Director, # mount messages also are sent to the email address # Messages { Name = Standard director = backuphost-1-dir = all } bacula-fd.conf # # Default Bacula File Daemon Configuration file # # # List Directors who are permitted to contact this File daemon # Director { Name = backuphost-1-dir Password = "hahahahahaha" } # # Restricted Director, used by tray-monitor to get the # status of the file daemon # Director { Name = backuphost-1-mon Password = "hohohohohho" Monitor = yes } # # "Global" File daemon configuration specifications # FileDaemon { # this is me Name = backuphost-1-fd FDport = 9102 # where we listen for the director WorkingDirectory = /var/lib/bacula Pid Directory = /var/run/bacula Maximum Concurrent Jobs = 20 #FDAddress = 127.0.0.1 FDAddress = 0.0.0.0 } # Send all messages except skipped files back to Director Messages { Name = Standard director = backuphost-1-dir = all, !skipped, !restored }

Read the article

How to configure fastcgi to work with ligttpd in ubuntu

- by michael

I am able to run lighttpd on ubuntu 9.10. But when i tried to setup fastcgi with lighttpd by putting this in the ligttpd.conf file: #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => "9098", "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", "docroot" => "/" # remote server may use # it's own docroot )) ) This is what I get in the error.log in ligttpd: 2010-03-07 21:00:11: (log.c.166) server started 2010-03-07 21:00:11: (mod_fastcgi.c.1104) the fastcgi-backend /usr/local/bin/cgi-fcgi failed to start: 2010-03-07 21:00:11: (mod_fastcgi.c.1108) child exited with status 1 /usr/local/bin/cgi-fcgi 2010-03-07 21:00:11: (mod_fastcgi.c.1111) If you're trying to run your app as a FastCGI backend, make sure you're using the FastCGI-enabled version. If this is PHP on Gentoo, add 'fastcgi' to the USE flags. 2010-03-07 21:00:11: (mod_fastcgi.c.1399) [ERROR]: spawning fcgi failed. 2010-03-07 21:00:11: (server.c.931) Configuration of plugins failed. Going down. I do have cgi-fcgi in /usr/local/bin: $ which cgi-fcgi /usr/local/bin/cgi-fcgi '/usr/local/bin/cgi-fcgi' is the executable after I download and compile fast-cgi. Here is my lighttpd conf file: $ more lighttpd.conf # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) server.port = 9090 ## bind to localhost (default: all interfaces) server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => 1026, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", #"docroot" => "/" # remote server may use # it's own docroot )) ) ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.s ocket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "ac cess plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 Thank you for your help.

Read the article

Why is Windows Update trying to install an update I don't need?

- by Oliver Salzburg

I have a Windows 7 system that currently has a single update pending: Windows Internet Explorer 9 for Windows 7 for x64-based Systems If I try to install the update, Windows Update will: Create a restore point Fail with the error: Code 9C48 Windows Update encountered an error. The event log for the event reads: Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Internet Explorer 9 for Windows 7 for x64-based Systems. If you search the web for that error, there are many other people with the exact same issue. Sadly, I am unable to apply the proposed solutions to my case, because I just installed this system. There is nothing on it, except Windows 7. I installed the system and ran through the updates. I also did the exact same process with this machine several times over the past few days due to a long-term test we just started. I didn't have any problems with any Windows Update on the previous installation runs and I know I didn't do anything different this time because I followed the installation procedures instructions which are to be used during the test. How did this happen and how do I solve it? Further Investigation So, as I always like to do, I ran the update again while running Process Monitor and dug up further details. WindowsUpdate.log First of all, there is a Windows Update log file located at C:\Windows\WindowsUpdate.log which I didn't know about. But I fail to see any significant entry in it, maybe you're more lucky: 2012-04-10 22:46:58:017 956 728 AU AU received approval from Ux for 1 updates 2012-04-10 22:46:58:017 956 728 AU AU setting pending client directive to 'Progress Ux' 2012-04-10 22:46:58:095 956 728 AU BeginInteractiveInstall invoked for Download 2012-04-10 22:46:58:095 956 728 AU Auto-approving update for download, updateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0 2012-04-10 22:46:58:095 956 728 AU Auto-approved 1 update(s) for download (for Ux) 2012-04-10 22:46:58:110 956 728 AU UpdateDownloadProperties: 0 download(s) are still in progress. 2012-04-10 22:46:58:110 956 728 AU ############# 2012-04-10 22:46:58:110 956 728 AU ## START ## AU: Download updates 2012-04-10 22:46:58:110 956 728 AU ######### 2012-04-10 22:46:58:110 956 728 AU # Approved updates = 1 2012-04-10 22:46:58:110 956 728 AU AU initiated download, updateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100, callId = {35DF928B-B428-4BAC-8C63-55295967EFBB} 2012-04-10 22:46:58:110 956 728 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:46:58:110 956 728 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:110 956 728 AU Currently showing Progress UX client - so not launching any other client 2012-04-10 22:46:58:110 956 bb8 DnldMgr ************* 2012-04-10 22:46:58:110 956 bb8 DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp] 2012-04-10 22:46:58:110 956 bb8 DnldMgr ********* 2012-04-10 22:46:58:110 956 bb8 DnldMgr * Call ID = {35DF928B-B428-4BAC-8C63-55295967EFBB} 2012-04-10 22:46:58:110 956 bb8 DnldMgr * Priority = 3, Interactive = 1, Owner is system = 0, Explicit proxy = 0, Proxy session id = 1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77} 2012-04-10 22:46:58:110 956 bb8 DnldMgr * Updates to download = 1 2012-04-10 22:46:58:110 956 bb8 Agent * Title = Windows Internet Explorer 9 for Windows 7 for x64-based Systems 2012-04-10 22:46:58:110 956 bb8 Agent * UpdateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100 2012-04-10 22:46:58:110 956 bb8 Agent * Bundles 1 updates: 2012-04-10 22:46:58:110 956 bb8 Agent * {6D9A90B7-FAF9-4A47-9EFE-A506264873B3}.100 2012-04-10 22:46:58:110 956 bb8 DnldMgr *********** DnldMgr: New download job [UpdateId = {6D9A90B7-FAF9-4A47-9EFE-A506264873B3}.100] *********** 2012-04-10 22:46:58:110 956 728 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:110 956 728 AU # Pending download calls = 1 2012-04-10 22:46:58:110 956 728 AU ## RESUMED ## AU: Download update [UpdateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}, succeeded] 2012-04-10 22:46:58:313 956 bb8 Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdatesWuApp] 2012-04-10 22:46:58:313 956 bb8 Agent ************* 2012-04-10 22:46:58:313 956 718 AU ######### 2012-04-10 22:46:58:313 956 718 AU ## END ## AU: Download updates 2012-04-10 22:46:58:313 956 718 AU ############# 2012-04-10 22:46:58:313 956 718 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:46:58:313 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:313 956 718 AU Currently showing Progress UX client - so not launching any other client 2012-04-10 22:46:58:313 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:313 956 aac AU Getting featured update notifications. fIncludeDismissed = true 2012-04-10 22:46:58:313 956 aac AU No featured updates available. 2012-04-10 22:47:00:107 956 aac AU BeginInteractiveInstall invoked for Install 2012-04-10 22:47:00:107 956 aac AU Auto-approving update for install, updateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0 2012-04-10 22:47:00:107 956 aac AU Auto-approved 1 update(s) for install (for Ux), installType=1 2012-04-10 22:47:00:107 956 aac AU ############# 2012-04-10 22:47:00:107 956 aac AU ## START ## AU: Install updates 2012-04-10 22:47:00:107 956 aac AU ######### 2012-04-10 22:47:00:107 956 aac AU # Initiating manual install 2012-04-10 22:47:00:107 956 aac AU # Approved updates = 1 2012-04-10 22:47:00:107 956 aac AU ## RESUMED ## AU: Installing update [UpdateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}] 2012-04-10 22:47:13:773 2232 9fc Handler : WARNING: Exit code = 0x8024200B 2012-04-10 22:47:13:773 956 718 AU # WARNING: Install failed, error = 0x80070643 / 0x00009C48 2012-04-10 22:47:13:773 2232 9fc Handler ::::::::: 2012-04-10 22:47:13:773 2232 9fc Handler :: END :: Handler: Command Line Install 2012-04-10 22:47:13:773 2232 9fc Handler ::::::::::::: 2012-04-10 22:47:13:851 956 a7c Agent ********* 2012-04-10 22:47:13:851 956 a7c Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates] 2012-04-10 22:47:13:851 956 718 AU Install call completed. 2012-04-10 22:47:13:851 956 a7c Agent ************* 2012-04-10 22:47:13:851 956 718 AU # WARNING: Install call completed, reboot required = No, error = 0x00000000 2012-04-10 22:47:13:851 956 718 AU ######### 2012-04-10 22:47:13:851 956 718 AU ## END ## AU: Installing updates [CallId = {FCFF2A5C-25AB-4FB9-AB2B-35C65CCA6A9F}] 2012-04-10 22:47:13:851 956 718 AU ############# 2012-04-10 22:47:13:851 956 718 AU Install complete for all calls, reboot NOT needed 2012-04-10 22:47:13:851 956 718 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:47:13:851 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:13:851 956 498 AU Getting featured update notifications. fIncludeDismissed = true 2012-04-10 22:47:13:851 956 498 AU No featured updates available. 2012-04-10 22:47:14:366 956 168 AU No featured updates notifications to show 2012-04-10 22:47:14:366 956 168 AU UpdateDownloadProperties: 0 download(s) are still in progress. 2012-04-10 22:47:14:366 956 168 AU Triggering Offline detection (non-interactive) 2012-04-10 22:47:14:366 956 168 AU AU setting pending client directive to 'Install Complete Ux' 2012-04-10 22:47:14:366 956 168 AU Changing existing AU client directive from 'Progress Ux' to 'Install Complete Ux', session id = 0x1 2012-04-10 22:47:14:366 956 168 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:14:366 956 b78 AU ############# 2012-04-10 22:47:14:366 956 b78 AU ## START ## AU: Search for updates 2012-04-10 22:47:14:366 956 b78 AU ######### 2012-04-10 22:47:14:366 956 b78 AU ## RESUMED ## AU: Search for updates [CallId = {0198DD3A-D7B0-48F5-A77D-795F8A1BDCE8}] 2012-04-10 22:47:16:097 956 718 AU # 1 updates detected 2012-04-10 22:47:16:097 956 718 AU ######### 2012-04-10 22:47:16:097 956 718 AU ## END ## AU: Search for updates [CallId = {0198DD3A-D7B0-48F5-A77D-795F8A1BDCE8}] 2012-04-10 22:47:16:097 956 718 AU ############# 2012-04-10 22:47:16:097 956 718 AU No featured updates notifications to show 2012-04-10 22:47:16:097 956 718 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:47:16:097 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:16:097 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:16:113 956 55c AU Getting featured update notifications. fIncludeDismissed = true 2012-04-10 22:47:16:113 956 55c AU No featured updates available. 2012-04-10 22:47:18:780 956 bb8 Report REPORT EVENT: {27479C66-E930-4F9C-AFF2-27EDD76DED8F} 2012-04-10 22:47:13:773+0200 1 182 101 {B33ACEC1-3265-4D01-9C37-AC0892E95ED9} 100 80070643 AutomaticUpdates Failure Content Install Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Internet Explorer 9 for Windows 7 for x64-based Systems. 2012-04-10 22:47:18:780 956 bb8 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8 2012-04-10 22:47:18:780 956 bb8 Report WER Report sent: 7.5.7601.17514 0x80070643 B33ACEC1-3265-4D01-9C37-AC0892E95ED9 Install 101 Unmanaged 2012-04-10 22:47:18:780 956 bb8 Report CWERReporter finishing event handling. (00000000) WU-IE9-Windows7-x64.exe The actual update that is executed is downloaded and stored at the following location: C:\Windows\SoftwareDistribution\Download\Install\WU-IE9-Windows7-x64.exe Executing that file manually, results in the following error message: IE9_main.log The IE9 installer/updater also creates an own log file located at C:\Windows\IE9_main.log For the update session in question, the installer logged: 00:00.000: ==================================================================== 00:00.016: Started: 2012/04/10 (Y/M/D) 23:10:53.897 (local) 00:00.032: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds) 00:00.063: Command line: "C:\Windows\SoftwareDistribution\Download\Install\WU-IE9-Windows7-x64.exe" 00:00.078: INFO: Setup installer for Internet Explorer: 9.0.8112.16421 00:00.094: INFO: Previous version of Internet Explorer: 9.0.8112.16443 00:00.110: INFO: Checking if iexplore.exe's current version is between 9.0.6001.0... 00:00.125: INFO: ...and 9.1.0.0... 00:00.141: INFO: Maximum version on which to run IEAK branding is: 9.1.0.0... 00:00.156: ERROR: A newer version of Internet Explorer is already installed on the system. 00:00.188: ERROR: Internet Explorer version check failed. 01:03.789: INFO: Setup exit code: 0x00009C48 (40008) - A more recent version of Internet Explorer is installed. 01:03.820: INFO: Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll 01:03.852: INFO: SQM Upload returned 403 01:03.867: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE978E.tmp 01:03.883: INFO: Unable to remove directory C:\Windows\TEMP\IE978E.tmp, marking for deletion on reboot. 01:03.898: INFO: Released Internet Explorer Installer Mutex Which pretty much confirms what the error message says when executing the update manually; it's simply already installed or even obsolete because a newer version is installed. So, why does it try to keep installing the update? Possible solutions? Uninstalling Windows Internet Explorer 9 and manually installing the cached C:\Windows\SoftwareDistribution\Download\Install\WU-IE9-Windows7-x64.exe will result in the same error after applying all pending updates. Applying the FixIt for the issue You receive “0x80070643” or “0x643” error codes when you try to install .NET Framework updates through Windows Update or Microsoft Updates will not resolve the issue. Applying the suggested solution for the issue Error message when you try to install updates by using the Windows Update or Microsoft Update Web site: "0x80070003" will not resolve the issue. Running the FixIt Automatically diagnose and fix common problems with Windows Update does report having resolved issues with Windows Update, but didn't resolve the issue. Running the FixIt for the issue How to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update does not resolve the issue. Neither with normal nor with aggressive settings.

Read the article

ServerRoot in my lighttpd.conf

- by michael

Hi, I have use the following example lighttpd.conf to launch my lighttpd. Can you please tell me where is my 'ServerRoot'? # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) server.port = 9090 ## bind to localhost (default: all interfaces) server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => 1026, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", #"docroot" => "/" # remote server may use # it's own docroot )) ) ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.socket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 Thank you.

Read the article

PC powers off at random times

- by Timo Huovinen

Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

Read the article

SOA PARTNER COMMUNITY NEWSLETTER JULY 2012

- by mseika

SOA PARTNER COMMUNITY NEWSLETTER JULY 2012 Dear SOA partner community member To provide our community members the best of our knowledge, we want your feedback on our SOA Partner community. Thus we are organizing SOA Partner Community Survey 2012. We request you to participate in the survey and give your valuable feedback on various areas of marketing, sales and education. To continue our successful BPM Suite, Oracle is launching together with you Process Accelerators initiative. It’s your opportunity to co-develop and market predefined processes. Oracle Fusion Applications Design Patterns are a great tool to develop your SOA or BPM solution or process accelerators. To promote your SOA & BPM Specialization we continue to offer several benefits. This month we would like to highlight our Specialization Plaques - make sure you request one for your office! Our Fusion Middleware Summer Camps are booked out, if could not get a seat you can attend the SOA & BPM track @ Virtual Developer Day: Oracle Fusion Development Oracle demo systems offer´s two new demos: Business Driven Development based on BPM Suite & SOA Lifecycle Management. Jürgen KressOracle SOA & BPM Partner Adoption EMEA NEW CONTENT Community SurveyProcess Accelerators KitPlaques SOA & BPM SpecializedSOA & BPM at Virtual Developer Day News from our Partners & CommunityOverview of SOA Diagnostics in 11.1.1.6 Business driven development(BDD) demo now available! SOA Lifecycle Management Oracle Fusion applications design patterns Updated material by Oracle Connect and Network SOA Blogs SOA on Facebook SOA on LinkedIn SOA on Twitter Mix SOA Forum COMMUNITY SURVEY Like every year we would like to get your feedback in our SOA Partner Community Survey 2012. Make sure that You attend to further develop our community and support our planning! It is key for us to get your feedback to prepare for the next fiscal year. Back to top PROCESS ACCELERATORS KIT Oracle is very interested to co-develop and market with you, our partners, pre-defined processes for BPM Suite.I am very happy to announce a new program called “Oracle BPM Partner Solution Catalog”. This program will provide a one-stop shop for our customers looking for Oracle BPM partner solutions available in the market today.The Oracle BPM Solution Catalog will be hosted on our very popular Oracle Technology Network (OTN). To give you an idea of the scale of customer visibility, OTN today receives over 1Million hits per day from our business and developer community. We would like to invite you to list your Oracle BPM 11g solutions available today.In order to participate in this program, you need to do the following: Fill in the attached slide templates - #3 and #4 for each Oracle BPM 11g solution you would like to list on OTN.Please add links to whitepapers , videos, references to the specific solution in the template slide. We recommend that you create a landing page on your website for these linked artifacts and just point to the same from within the PowerPoint template. This will give you the flexibility to update the information as frequently as needed. If you have the particular solution in production or a reference available, please list them as well. Send the PowerPoint template slides (1 set of slides for each Oracle BPM solution) to [email protected]. In addition to having the opportunity to list your solutions on OTN for Oracle customers, you will have the chance to advertise your new wins/implementations/solutions in an Oracle Sponsored PM Webinar held every quarter. This program is targeted to go live by the end of summer 2012. At this point, we are targeting a soft launch in July end 2012 so send on your BPM solutions information as soon as possible. We would love to have your solution(s) listed in the “Oracle BPM Partner Solution Catalog” at the time of the launch. This will be a live repository so you can keep adding more solutions as they become available. If you have any questions, please feel free to contact us [email protected], Product Strategy Director, Oracle BPM , Phone +1 650.506.5486.Thank you and look forward to hearing from you. Oracle BPM team Process Accelerators Overview.pdf ProcessAcceleratorsDataSheet.pdf Demos draUPK.zip & trmUPK.zip BPM Solution repository slides.ppt Additional BPM material BPM Process Development Lifecycle Document that describes recommended approach to collaborative process modeling across business and IT tools ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization) by Andrejus Baranovskis BPMN process editor problems in 11.1.1.6 by Mark Nelson BPM – Disable DBMS job to refresh B2B Materialized View by Mark Nelson For the complete kit please visit the BPM folder at our SOA Community Workspace (SOA Community membership required). For the complete presentation please visit our SOA Community Workspace (SOA Community membership required). Information is Oracle and Partner confidential! Back to top PLAQUES SOA & BPM SPECIALIZED We continue to offer you a nice SOA & BPM Specialization plaque with your logo to proof your success. If you are a SOA or BPM Specialized partner and would like to request the plaque please send Brigitte an e-mail with the following information: Partner Name Partner logo (preferred eps file) Partner Status gold or platinum Your shipping address Your Specialization: SOA or BPM We recommend to mount the plaque at your office reception in addition you can use the SOA Specialization logos at your website download Logo: Gold & Platinum or the BPM logos Gold & Platinum Back to top SOA & BPM AT VIRTUAL DEVELOPER DAY Register now for this FREE hands-on online workshop Get up to date and learn everything you wanted to know about Oracle ADF & Fusion Development plus live Q&A chats with Oracle technical staffOracle Application Development Framework (ADF) is the standards based, strategic framework for Oracle Fusion Applications and Oracle Fusion Middleware. Oracle ADF’s integration with the Oracle SOA Suite, Oracle WebCenter and Oracle BI creates a complete productive development platform for your custom applications.Join us at this FREE virtual event and learn the latest in Fusion Development including: Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle ADF development with Eclipse Oracle WebCenter Portal and ADF Development Application Lifecycle Management with ADF Building Process Centric Applications with ADF and BPM Oracle Business Intelligence and ADF Integration Live Q&A chats with Oracle technical staff Developer lead, manager or architect - this event has something for everyone. Don’t miss this opportunity.Tuesday, July 10, 2012. 9:00 a.m. PT -1:00 p.m. PT 11:00 a.m. CT - 3:00 p.m. CT 12:00 p.m. ET - 4:00 p.m. ET 1:00 p.m. BRT - 5:00 p.m. BRT Register online now! for this FREE event. Agenda: 09:00 am Opening 09:30 am Keynote: Oracle Fusion Development Track1Introduction to Fusion Development Track2What's New in Fusion Development Track3Fusion Development in the Enterprise 10:00 am Is Oracle ADF Development Faster and Simpler than Oracle Forms, APEX or .Net? Mobile Application Development with ADF Mobile Oracle WebCenter Portal and ADF Development 11:00 am Rich Web UI made simple - an ADF Faces Overview Oracle Enterprise Pack for Eclipse - ADF Development Building Process Centric Applications with ADF and BPM 12:00 noon Next Generation Controller for JSF Application Lifecycle Management for ADF Oracle Business Intelligence and ADF Integration *Hands On Lab – WebCenter and ADF Lab w/ JDeveloper - Lab materials will be provided ahead of the event to give you ample time to work through the lab and increase the productivity of the live chat sessions the day of the event. Sessions abstractsRegister online now! for this FREE event Read more on Community Events and post your comment here. Back to top NEWS FROM OUR PARTNERS AND COMMUNITY Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity JDeveloper & ADF?Troubleshooting BPMN process editor problems in 11.1.1.6http://dlvr.it/1p0FfS SOA Community?SOA & BPM @ Virtual Developer Day: Oracle Fusion Development - July 10th 2012https://soacommunity.wordpress.com/2012/07/02/soa-bpm-virtual-developer-day- oracle-fusion-developmentjuly-10th-2012/#soacommunity #soa #bom #education orclateamsoa ?A-Team Blog #ateam: BAM design pointers - In working recently with a large Oracle customer on SOA and BAM, I discove.http://ow.ly/1kYqES SOA CommunitySOA Community Newsletter June 2012http://wp.me/p10C8u-qw SOA CommunityBPMN process editor problems in 11.1.1.6 by Mark Nelsonhttp://redstack.wordpress.com/2012/06/27/ bpmn-process-editor-problems-in-11-1-1-6 #soacommunity #bpm OTNArchBeat ?SOA Learning Library: free short, topic-focused training on Oracle SOA & BPM products | @SOACommunity http://pub.vitrue.com/NE1G Andrejus Baranovskis ?ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization)http://fb.me/1coX4r1X1 SOA CommunitySOA Learning Library provides a comprehensive curriculum for the SOA and BPM product suites https://soacommunity.wordpress.com/2012/06/27/soa-learning-library #soacommunity #soa #bpm OTNArchBeat ?A Universal JMX Client for Weblogic - Part 1: Monitoring BPEL Thread Pools in SOA 11g | Stefan Koserhttp://pub.vitrue.com/mQVZ OTNArchBeat ?BPM - Disable DBMS job to refresh B2B Materialized View | Mark Nelson http://pub.vitrue.com/3PR0Oracle SOA ?Learn how Choice Hotels Implements Innovative Google Maps Solution with #OracleSOA http://bit.ly/MTwIJ3 SOA Communitytop Tweets SOA Partner Community - June 2012 Send your tweets @soacommunity #soacommunity https://soacommunity.wordpress.com/2012/06/25/top-tweets-soa-partner-community-june-2012 Torsten Winterberg#OPITZ is pushing Oracle commitment to the next level: New Specializations done: ADF, BPM, WLS, Exadatahttp://bit.ly/KX1WVS ServiceTechSymposium ?Only 8 more days left until Super Early Bird Registration Discount expires! http://www.servicetechsymposium.com OracleBlogsSOA Management in 3 minutes - Video explainerhttp://ow.ly/1kN5pn SOA Community ?SOA, Cloud & Service Technology Symposium 2012 London - Enter Promo Code: Djmxz370https://soacommunity.wordpress.com/2012/06/22/soa-cloud-service-technology-symposium-2012-london #soasymposium #soacommunity #soa Heidi BuelowGreat course! w David Read RT @soacommunity: product management ADF for BPM training 5 seats left https://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity SOA Community ?product management ADF for BPM training 5 seats lefthttps://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity OTNArchBeat ?Oacle Fusion Applications Design Patterns Now Available For Developers | Ultan O'Broinhttp://pub.vitrue.com/UEiF OTNArchBeat ?SOA, Cloud & Service Technology Symposium 2012London - Special Oracle Discounthttp://pub.vitrue.com/8E0J SOA CommunityBecome a facebook fan of soacommunity http://www.facebook.com/soacommunity #soacommunity SOA Community ?SOA Suite HealthCare Integration Architecture https://blogs.oracle.com/SOAForHealthcare/entry/soa_suite_healthcare_integration_architecture #soacommunity #soa Andrejus Baranovskis ?Running Pre-built Virtual Machine for SOA Suite and BPM Suite 11g PS5 on Mac OS X Snow Leopard (10.6http://fb.me/vB8nO0Vg OracleBlogsPrinciples of Service-Oriented Architecture by Douwe P. van den Bos http://ow.ly/1kIcOP OTNArchBeatOracle Public Cloud Architecture | @TylerJewell http://ow.ly/bHAcL The SOA Network ?Business Process Management, Service-Oriented Architecture, and Web 2.0: Business Transformation or.http://bit.ly/LBgREL #ITNews #SOA OracleBlogs ?Oracle SOA Foundation Practitioner Certificationhttp://ow.ly/1kGYYg Frank Nimphius ?Learn Advanced ADF. ORACLE Fusion Middleware Summer Camps in Lisbon - July 9th - 13thhttp://bit.ly/KGCl3i SOA CommunityTransform Your Application Integration with Best Practices from Oracle Customershttps://blogs.oracle.com/SOA/entry/transform_your_application_integration_with #soacommunity #soa #bpm Simone GeibWhat you always wanted to know about #oraclesoa diagnostics: Shawn Bailey, Overview of SOA Diagnostics in 11.1.1.6,http://ow.ly/bxK0M Oracle SOA ?Save the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to #oraclesoa http://bit.ly/LsNDGl OTNArchBeat ?New VirtualBox images for Oracle SOA Suite & Oracle BPM Suite 11.1.1.6.0http://ow.ly/bwDAl OracleBlogs ?Process development lifecycle in Oracle BPM 11g http://ow.ly/1ktesY Daniel AmadeiNew post: Oracle BPEL 11g Message Delivery & Recovery.http://amadei.com.br/blog/index.php /oracle-bpel-11g-message-delivery SOA Community ?Sending out the June edition of the #soacommunity newsletter - read it or become a member http://www.oracle.com/goto/emea/soa!#soa #bpm Arun Pareek ?For the past six months Ahmed Aboulnaga and me have been working on Oracle SOA Suite 11g Administrator's Handbook.http://lnkd.in/CAvpUQ SOA CommunitySun shine all day no clouds - solar eclipse is over... #sunshine #cloud http://www.infoq.com/presentations/Swarm-Computing Michel SchildmeijerWatch my blog Oracle Service Bus 11g: listing projects and services with WLST - part 1 http://lnkd.in/B7f3GQ @TITAN_GS @wlscommunity OTNArchBeatBook Review: Oracle Application Integration Architecture (AIA) Foundation Pack 11gR1: Essentials | Rajesh Rahejahttp://ow.ly/bn2cc OTNArchBeat ?Driving from Business Architecture to Business Process Services | @vghariharan http://ow.ly/bn5UB OTNArchBeat ?SOA Analysis within the Department of Defense Architecture Framework (DoDAF) 2.0 - Part II | Dawit Lessanu http://ow.ly/bn6sX Simone Geib ?Contact me directly for ideas how to improvehttp://bit.ly/advancedsoasuite and additional posts, presentations, white papers, ... #soasuite Simone Geib ?#soasuite advanced OTN page has become too cluttered. Broke it into separate pages to start with. http://bit.ly/advancedsoasuite OracleBlogs ?June Webcast: SOA Gateway Implementation and Troubleshooting (2 sessions) http://ow.ly/1kbRFA ServiceTechSymposium ?New session just posted to calendar: "NoSQL for Data Services, Data Virtualization & Big Data" by Guido Schmutz, Trivadis AG ://ow.ly/bjjOeDebra Lilley ?looks good - real proof people are using the apps ! RT @fteter: Very cool Fusion Applications Help site: http://bit.ly/L3nvOR #FusionApps demed ?rapid proliferation of cloud computing will drive convergence of SOA and cloud paradigms" http://ovum.com/2012/05/18/soa-paves-the-way-for-cloud/ SOA CommunityMiddleware Oracle Excellence Awards 2012-HAPPY NEW YEAR! https://soacommunity.wordpress.com/2012/05/31/middleware-oracle-excellence-awards-2012happy-new-year/ #soacommunity #opn #opnaward #specialization #oracle SOA CommunityHappy New Year #soacommunity thanks for the business! Time for a drink http://pic.twitter.com/zkK08KWB OTNArchBeat ?Who should ‘own’ the Enterprise Architecture? | Michael Glas http://bit.ly/K0ge0Q SOA Communitytop Tweets SOA Partner Community – May 2012 http://wp.me/p10C8u-pP ServiceTechSymposiumNew session just posted to Symposium calendar: "Elastic SOA in the Cloud" by Steve Millidge, C2B2 Consulting http://www.servicetechsymposium.com/agenda2012.php #elastic_soa_in_the_cloud orclateamsoa ?A-Team Blog #ateam: How to Set JVM Parameters in Oracle SOA 11Ghttp://ow.ly/1k2cnl ServiceTechSymposium ?New session just posted to Symposium calendar: "SOA Governance at EDP: A Global Energy Company" by Manuel Rosa, Linkhttp://www.servicetechsymposium.com/agenda2012.php#soa_governance_at_edp SOA Community ?VirtualBox image SOA Suite & BPM Suite 11.1.1.6.0–Your feedback?http://wp.me/p10C8u-qh Oracle MiddlewareSave the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to#oraclesoa http://bit.ly/LU1y5N OTNArchBeat ?Goodbye, Silos. Hello SOA. | @stephanieoverbyhttp://pub.vitrue.com/NJJO SOA CommunityBPM Standard Edition - to start your BPM project http://wp.me/p10C8u-qj Please feel free to send us your news! And add your blog to our SOA blog wiki. Back to top OVERVIEW OF SOA DIAGNOSTICS IN 11.1.1.6 What tools are available for diagnosing SOA Suite issues? There are a variety of tools available to help you and Support diagnose SOA Suite issues in 11g but it can be confusing as to which tool is appropriate for a particular situation and what their relationships are. This blog post will introduce the various tools and attempt to clarify what each is for and how they are related. Let's first list the tools we'll be addressing: RDA: Remote Diagnostic Agent DFW: Diagnostic Framework Selective Tracing DMS: Dynamic Monitoring Service ODL: Oracle Diagnostic Logging ADR: Automatic Diagnostics Repository ADRCI: Automatic Diagnostics Repository Command Interpreter WLDF: WebLogic Diagnostic Framework This overview is not mean to be a comprehensive guide on using all of these tools, however, extensive reference materials are included that will provide many more details on their execution. Another point to note is that all of these tools are applicable for Fusion Middleware as a whole but specific products may or may not have implemented features to leverage them. A couple of the tools have a WebLogic Scripting Tool or 'WLST' interface. WLST is a command interface for executing pre-built functions and custom scripts against a domain. A detailed WLST tutorial is beyond the scope of this post but you can find general information here. There are more specific resources in the below sections.In this post when we refer to 'Enterprise Manager' or 'EM' we are referring to Enterprise Manager Fusion Middleware Control. read the full blog post here. Read more on Oracle and post your comment here. Back to top BUSINESS DRIVEN DEVELOPMENT (BDD) DEMO NOW AVAILABLE! For access to the Oracle demo systems please visit OPN and talk to your Partner Expert DSS is pleased to announce the availability of the demo “Business Driven Development“. This innovative demonstration uses a case-study approach to show business users how they can easily streamline their Business Processes - delivering greater efficiency, agility, visibility and collaboration with Oracle BPM and WebCenter. The BDD demonstration uses a case study-based approach to highlight a business problem at a fictional company, Avitek Corporation, and uses Oracle BPM and Oracle WebCenter to solve the business problem. This holistic approach has specifically been used to appeal to a non-technical business analyst user. This demo is NOT focused on product features, but aims to guide users through a complete BPM lifecycle. The scenario is based on improving a simple order process (scenario details are in the demo script). Avitek Corporation is sufferinng from a manual email-driven ordering process. Sales reps don’t know where the customer orders are stuck (no visibility) and finance users are unable to manually approve every order (no automation). There are several areas where this process can be improved with Business Process Management technology. This demo shows how improving following areas will ignificantly help resolve the business problems Avitek Corporation is facing. Areas for improvement include: Utilizing BPM for process management, rather than an unregulated, email-based process. Utilizing automated services, rather than requiring a human to key into a system. For example, Finance checking the customer’s credit rating is something that could be automated. Centralizing business rules that can be integrated into a business process, rather than requiring a human to process them. For example, Finance must determine when orders can be automatically approved. Provide insight and visibility into the process. For example, Sales Rep needs to know the status of their customer’s orders. The BDD Demo uses the following products. Oracle BPM Suite 11g PS4FP Oracle WebCenter 11g PS4FP (for Process Spaces) Oracle Business Activity Monitoring 11g Oracle Database 11g Back to top SOA LIFECYCLE MANAGEMENT For access to the Oracle demo systems please visit OPN and talk to your Partner Expert We are pleased to announce the availability of the SOA Management demo that showcases some of the key provisioning and lifecycle management capabilities of SOA Management Pack Enterprise Edition (EE). This demo specifically focuses on some of the lifecycle management solutions for Oracle SOA Suite and Oracle Service Bus (OSB). Demo Highlights The demo showcases the following capabilities. Provisioning of SOA Composites Provisioning of OSB Projects Provision SOA and OSB artifacts in a future maintenance window Back to top ORACLE FUSION APPLICATIONS DESIGN PATTERNS The Oracle Fusion Applications user experience design patterns are published! These new, reusable usability solutions and best-practices, which will join the Oracle dashboard patterns and guidelines that are already available online, are used by Oracle to artfully bring to life a new standard in the user experience, or UX, of enterprise applications. Now, the Oracle applications development community can benefit from the science behind the Oracle Fusion Applications user experience, too. These Oracle Fusion Applications UX Design Patterns, or blueprints, enable Oracle applications developers and system implementers everywhere to leverage professional usability insight when: tailoring an Oracle Fusion application, creating coexistence solutions that existing users will be delighted with, thus enabling graceful user transitions to Oracle Fusion Applications down the road, or designing exciting, new, highly usable applications in the cloud or on-premise. Based on the Oracle Application Development Framework (ADF) components, the Oracle Fusion Applications patterns and guidelines are proven with real users and in the Applications UX usability labs, so you can get right to work coding productivity-enhancing designs that provide an advantage for your entire business. What’s the best way to get started? We’ve made that easy, too. The Design Filter Tool (DeFT) selects the best pattern for your user type and task. Simply adapt your selection for your own task flow and content, and you’re on your way to a really great applications user experience. More Oracle applications design patterns and training are coming your way in the future. To provide feedback on the sets that are currently available, let me know in the comments! Read more on Fusionapps and post your comment here. Back to top UPDATED ORACLE MATERIAL Integrated SOA Gateway Documentation - Implementation Guide | Developer’s Guide Webcast Series: Oracle’s SOA and Oracle Business Process Management Solutions (Choice Hotels, Eaton, Farmers Insurance) BAM design pointers By Kavitha Srinivasan Seeking Oracle Fusion Middleware Go Live StoriesOracle Fusion Middleware product management is looking for recent go live stories to share with the Oracle sales team, sales consulting, product management and other internal groups. Customer contact details may remain anonymous. Your successful implementation will be featured in a quarterly report. The chance to present on an internal webcast is also available. Contact Maria Forney ([email protected]) if you have a noteworthy implementation success story. This is a good opportunity for partners interested in showcasing Oracle Fusion Middleware implementations, and gaining more exposure within Oracle. Performance tuning resources. All in one: docs, blogs, WPs, ppts: http://bit.ly/soa_resources Back to top HAVE YOU MISSED OUR LAST SOA PARTNER COMMUNITY WEBCASTS? UPK Webcast Business Driven Application Management & BPM11g & Application Grid & GoldenGate & Fusion Middleware Pricing & OC4J to WebLogic & Next Generation SOA & Fusion Middleware in Utility & Fusion Middleware in Communications & Fusion Middleware in Public Services & Fusion Middleware in Financial Services Please check your local OPN trainings calendar for additional training dates and locations. Back to top SOA PARTNER COMMUNITY CALENDAR On-Demand Trainings Event Name Language Type SOA Virtual Developers Day English Tech In-Class Trainings Date Event name Location / Country Contact person Type 09-13.07.2012 BPM Suite 11g advanced training by David Read Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 ADF 11g advanced training by Grant Ronald and Frank Nimphius Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 WebCenter Portal advanced training by Stefan Krantz and Angelo Santagata Lisbon, Portugal Jürgen Kress Tech 10.07.2012 Fusion Middleware Virtual Developer Day Online OTN Tech 10- 12.07.2012 WebLogic 12c training by Cosmin Tudor Lisbon, Portugal Jürgen Kress Tech 16-18.07.2012 SOA Suite 11g advanced training by Niall Commiskey Munich, Germany Jürgen Kress Tech 16-18.07.2012 ADF for BPM Suite 11g advanced training by David Read Munich, Germany Jürgen Kress Tech 16-18.07.2012 WebCenter Sites 11g advanced training by Product Management Munich, Germany Jürgen Kress Tech 17-20.07.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 23-26.07.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 29-31.08.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 02-05.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 28-30.11.2012 Oracle AIA 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 11-14.12.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 20-22.2.2013 Oracle AIA 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 14-17.1.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.3.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech Please check your local OPN Training Calendar for additional training and locations here. Back to top SOASCHOOL.COM - SOA CERTIFIED PROFESSIONAL(SOACP) PROGRAM The SOASchool.com - SOA Certified Professional (SOACP) program is dedicated to excellence in the field of SOA and service-oriented computing. Through a series of seasoned course modules and exams, IT professionals have the opportunity to obtain a number of different certifications to recognize their accomplishment of gaining "project ready" SOA proficiency. This comprehensive and strictly vendor-neutral program was developed in cooperation with best-selling SOA author Thomas Erl and several major SOA organizations and academic institutions. Through the involvement of the SOA Education Committee, course contents and certification requirements are constantly reviewed and revised to stay current with developments in the service-oriented computing industry. The program is currently comprised of 12 course modules and 5 certifications and is expanding to 18 course modules and 8 certifications throughout 2009. For more information, visit www.soaschool.com and www.soacp.com. Blog Twitter LinkedIn Mix Forum Wiki Back to top YOUR CONTENT ON THE NEWSLETTER AND ON THE SOA COMMUNITY PORTAL Publishing Your StoriesWe would like to invite our partners to publish information in the newsletter or on our SOA Community portal. Especially we are looking for your real life experience with our SOA technology. Please send your documents to Jürgen Kress. We look forward to getting your suggestions! Back to top SOA DISCUSSION FORUM BECOMES INTERACTIVE AT THE SOA COMMUNITY! Do you want to chat to experts, including partners and Oracle SOA Product Development? Do you want to get the latest information about our SOA solutions and events?Attend our private online SOA Discussion Forum at OTN. Please send your OTN forums user name to Brigitte Felisaz. You must be a registered user to access the SOA Discussion Forum. Back to top INVITE YOUR COLLEAGUES TO JOIN THE SOA COMMUNITY Please feel free to invite your colleagues to join the SOA Community and to participate in the SOA Assessment tests. For registration please login the Oracle PartnerNetwork and go to: www.oracle.com/goto/emea/soa For any questions on the above or concerning SOA and Oracle in general please contact the Oracle EMEA Alliances & Channels SOA Team. Best regardsOracle EMEA SOA TeamJürgen Kress Jürgen KressSOA Partner Adoption EMEATel. +49 89 1430 1479E-Mail: [email protected]

Read the article

An Introduction to ASP.NET Web API

- by Rick Strahl

Microsoft recently released ASP.NET MVC 4.0 and .NET 4.5 and along with it, the brand spanking new ASP.NET Web API. Web API is an exciting new addition to the ASP.NET stack that provides a new, well-designed HTTP framework for creating REST and AJAX APIs (API is Microsoft’s new jargon for a service, in case you’re wondering). Although Web API ships and installs with ASP.NET MVC 4, you can use Web API functionality in any ASP.NET project, including WebForms, WebPages and MVC or just a Web API by itself. And you can also self-host Web API in your own applications from Console, Desktop or Service applications. If you're interested in a high level overview on what ASP.NET Web API is and how it fits into the ASP.NET stack you can check out my previous post: Where does ASP.NET Web API fit? In the following article, I'll focus on a practical, by example introduction to ASP.NET Web API. All the code discussed in this article is available in GitHub: https://github.com/RickStrahl/AspNetWebApiArticle [republished from my Code Magazine Article and updated for RTM release of ASP.NET Web API] Getting Started To start I’ll create a new empty ASP.NET application to demonstrate that Web API can work with any kind of ASP.NET project. Although you can create a new project based on the ASP.NET MVC/Web API template to quickly get up and running, I’ll take you through the manual setup process, because one common use case is to add Web API functionality to an existing ASP.NET application. This process describes the steps needed to hook up Web API to any ASP.NET 4.0 application. Start by creating an ASP.NET Empty Project. Then create a new folder in the project called Controllers. Add a Web API Controller Class Once you have any kind of ASP.NET project open, you can add a Web API Controller class to it. Web API Controllers are very similar to MVC Controller classes, but they work in any kind of project. Add a new item to this folder by using the Add New Item option in Visual Studio and choose Web API Controller Class, as shown in Figure 1. Figure 1: This is how you create a new Controller Class in Visual Studio Make sure that the name of the controller class includes Controller at the end of it, which is required in order for Web API routing to find it. Here, the name for the class is AlbumApiController. For this example, I’ll use a Music Album model to demonstrate basic behavior of Web API. The model consists of albums and related songs where an album has properties like Name, Artist and YearReleased and a list of songs with a SongName and SongLength as well as an AlbumId that links it to the album. You can find the code for the model (and the rest of these samples) on Github. To add the file manually, create a new folder called Model, and add a new class Album.cs and copy the code into it. There’s a static AlbumData class with a static CreateSampleAlbumData() method that creates a short list of albums on a static .Current that I’ll use for the examples. Before we look at what goes into the controller class though, let’s hook up routing so we can access this new controller. Hooking up Routing in Global.asax To start, I need to perform the one required configuration task in order for Web API to work: I need to configure routing to the controller. Like MVC, Web API uses routing to provide clean, extension-less URLs to controller methods. Using an extension method to ASP.NET’s static RouteTable class, you can use the MapHttpRoute() (in the System.Web.Http namespace) method to hook-up the routing during Application_Start in global.asax.cs shown in Listing 1.using System; using System.Web.Routing; using System.Web.Http; namespace AspNetWebApi { public class Global : System.Web.HttpApplication { protected void Application_Start(object sender, EventArgs e) { RouteTable.Routes.MapHttpRoute( name: "AlbumVerbs", routeTemplate: "albums/{title}", defaults: new { symbol = RouteParameter.Optional, controller="AlbumApi" } ); } } } This route configures Web API to direct URLs that start with an albums folder to the AlbumApiController class. Routing in ASP.NET is used to create extensionless URLs and allows you to map segments of the URL to specific Route Value parameters. A route parameter, with a name inside curly brackets like {name}, is mapped to parameters on the controller methods. Route parameters can be optional, and there are two special route parameters – controller and action – that determine the controller to call and the method to activate respectively. HTTP Verb Routing Routing in Web API can route requests by HTTP Verb in addition to standard {controller},{action} routing. For the first examples, I use HTTP Verb routing, as shown Listing 1. Notice that the route I’ve defined does not include an {action} route value or action value in the defaults. Rather, Web API can use the HTTP Verb in this route to determine the method to call the controller, and a GET request maps to any method that starts with Get. So methods called Get() or GetAlbums() are matched by a GET request and a POST request maps to a Post() or PostAlbum(). Web API matches a method by name and parameter signature to match a route, query string or POST values. In lieu of the method name, the [HttpGet,HttpPost,HttpPut,HttpDelete, etc] attributes can also be used to designate the accepted verbs explicitly if you don’t want to follow the verb naming conventions. Although HTTP Verb routing is a good practice for REST style resource APIs, it’s not required and you can still use more traditional routes with an explicit {action} route parameter. When {action} is supplied, the HTTP verb routing is ignored. I’ll talk more about alternate routes later. When you’re finished with initial creation of files, your project should look like Figure 2. Figure 2: The initial project has the new API Controller Album model Creating a small Album Model Now it’s time to create some controller methods to serve data. For these examples, I’ll use a very simple Album and Songs model to play with, as shown in Listing 2. public class Song { public string AlbumId { get; set; } [Required, StringLength(80)] public string SongName { get; set; } [StringLength(5)] public string SongLength { get; set; } } public class Album { public string Id { get; set; } [Required, StringLength(80)] public string AlbumName { get; set; } [StringLength(80)] public string Artist { get; set; } public int YearReleased { get; set; } public DateTime Entered { get; set; } [StringLength(150)] public string AlbumImageUrl { get; set; } [StringLength(200)] public string AmazonUrl { get; set; } public virtual List<Song> Songs { get; set; } public Album() { Songs = new List<Song>(); Entered = DateTime.Now; // Poor man's unique Id off GUID hash Id = Guid.NewGuid().GetHashCode().ToString("x"); } public void AddSong(string songName, string songLength = null) { this.Songs.Add(new Song() { AlbumId = this.Id, SongName = songName, SongLength = songLength }); } } Once the model has been created, I also added an AlbumData class that generates some static data in memory that is loaded onto a static .Current member. The signature of this class looks like this and that's what I'll access to retrieve the base data:public static class AlbumData { // sample data - static list public static List<Album> Current = CreateSampleAlbumData(); /// <summary> /// Create some sample data /// </summary> /// <returns></returns> public static List<Album> CreateSampleAlbumData() { … }} You can check out the full code for the data generation online. Creating an AlbumApiController Web API shares many concepts of ASP.NET MVC, and the implementation of your API logic is done by implementing a subclass of the System.Web.Http.ApiController class. Each public method in the implemented controller is a potential endpoint for the HTTP API, as long as a matching route can be found to invoke it. The class name you create should end in Controller, which is how Web API matches the controller route value to figure out which class to invoke. Inside the controller you can implement methods that take standard .NET input parameters and return .NET values as results. Web API’s binding tries to match POST data, route values, form values or query string values to your parameters. Because the controller is configured for HTTP Verb based routing (no {action} parameter in the route), any methods that start with Getxxxx() are called by an HTTP GET operation. You can have multiple methods that match each HTTP Verb as long as the parameter signatures are different and can be matched by Web API. In Listing 3, I create an AlbumApiController with two methods to retrieve a list of albums and a single album by its title .public class AlbumApiController : ApiController { public IEnumerable<Album> GetAlbums() { var albums = AlbumData.Current.OrderBy(alb => alb.Artist); return albums; } public Album GetAlbum(string title) { var album = AlbumData.Current .SingleOrDefault(alb => alb.AlbumName.Contains(title)); return album; }} To access the first two requests, you can use the following URLs in your browser: http://localhost/aspnetWebApi/albumshttp://localhost/aspnetWebApi/albums/Dirty%20Deeds Note that you’re not specifying the actions of GetAlbum or GetAlbums in these URLs. Instead Web API’s routing uses HTTP GET verb to route to these methods that start with Getxxx() with the first mapping to the parameterless GetAlbums() method and the latter to the GetAlbum(title) method that receives the title parameter mapped as optional in the route. Content Negotiation When you access any of the URLs above from a browser, you get either an XML or JSON result returned back. The album list result for Chrome 17 and Internet Explorer 9 is shown Figure 3. Figure 3: Web API responses can vary depending on the browser used, demonstrating Content Negotiation in action as these two browsers send different HTTP Accept headers. Notice that the results are not the same: Chrome returns an XML response and IE9 returns a JSON response. Whoa, what’s going on here? Shouldn’t we see the same result in both browsers? Actually, no. Web API determines what type of content to return based on Accept headers. HTTP clients, like browsers, use Accept headers to specify what kind of content they’d like to see returned. Browsers generally ask for HTML first, followed by a few additional content types. Chrome (and most other major browsers) ask for: Accept: text/html, application/xhtml+xml,application/xml; q=0.9,*/*;q=0.8 IE9 asks for: Accept: text/html, application/xhtml+xml, */* Note that Chrome’s Accept header includes application/xml, which Web API finds in its list of supported media types and returns an XML response. IE9 does not include an Accept header type that works on Web API by default, and so it returns the default format, which is JSON. This is an important and very useful feature that was missing from any previous Microsoft REST tools: Web API automatically switches output formats based on HTTP Accept headers. Nowhere in the server code above do you have to explicitly specify the output format. Rather, Web API determines what format the client is requesting based on the Accept headers and automatically returns the result based on the available formatters. This means that a single method can handle both XML and JSON results.. Using this simple approach makes it very easy to create a single controller method that can return JSON, XML, ATOM or even OData feeds by providing the appropriate Accept header from the client. By default you don’t have to worry about the output format in your code. Note that you can still specify an explicit output format if you choose, either globally by overriding the installed formatters, or individually by returning a lower level HttpResponseMessage instance and setting the formatter explicitly. More on that in a minute. Along the same lines, any content sent to the server via POST/PUT is parsed by Web API based on the HTTP Content-type of the data sent. The same formats allowed for output are also allowed on input. Again, you don’t have to do anything in your code – Web API automatically performs the deserialization from the content. Accessing Web API JSON Data with jQuery A very common scenario for Web API endpoints is to retrieve data for AJAX calls from the Web browser. Because JSON is the default format for Web API, it’s easy to access data from the server using jQuery and its getJSON() method. This example receives the albums array from GetAlbums() and databinds it into the page using knockout.js.$.getJSON("albums/", function (albums) { // make knockout template visible $(".album").show(); // create view object and attach array var view = { albums: albums }; ko.applyBindings(view); }); Figure 4 shows this and the next example’s HTML output. You can check out the complete HTML and script code at http://goo.gl/Ix33C (.html) and http://goo.gl/tETlg (.js). Figu Figure 4: The Album Display sample uses JSON data loaded from Web API. The result from the getJSON() call is a JavaScript object of the server result, which comes back as a JavaScript array. In the code, I use knockout.js to bind this array into the UI, which as you can see, requires very little code, instead using knockout’s data-bind attributes to bind server data to the UI. Of course, this is just one way to use the data – it’s entirely up to you to decide what to do with the data in your client code. Along the same lines, I can retrieve a single album to display when the user clicks on an album. The response returns the album information and a child array with all the songs. The code to do this is very similar to the last example where we pulled the albums array:$(".albumlink").live("click", function () { var id = $(this).data("id"); // title $.getJSON("albums/" + id, function (album) { ko.applyBindings(album, $("#divAlbumDialog")[0]); $("#divAlbumDialog").show(); }); }); Here the URL looks like this: /albums/Dirty%20Deeds, where the title is the ID captured from the clicked element’s data ID attribute. Explicitly Overriding Output Format When Web API automatically converts output using content negotiation, it does so by matching Accept header media types to the GlobalConfiguration.Configuration.Formatters and the SupportedMediaTypes of each individual formatter. You can add and remove formatters to globally affect what formats are available and it’s easy to create and plug in custom formatters.The example project includes a JSONP formatter that can be plugged in to provide JSONP support for requests that have a callback= querystring parameter. Adding, removing or replacing formatters is a global option you can use to manipulate content. It’s beyond the scope of this introduction to show how it works, but you can review the sample code or check out my blog entry on the subject (http://goo.gl/UAzaR). If automatic processing is not desirable in a particular Controller method, you can override the response output explicitly by returning an HttpResponseMessage instance. HttpResponseMessage is similar to ActionResult in ASP.NET MVC in that it’s a common way to return an abstract result message that contains content. HttpResponseMessage s parsed by the Web API framework using standard interfaces to retrieve the response data, status code, headers and so on[MS2] . Web API turns every response – including those Controller methods that return static results – into HttpResponseMessage instances. Explicitly returning an HttpResponseMessage instance gives you full control over the output and lets you mostly bypass WebAPI’s post-processing of the HTTP response on your behalf. HttpResponseMessage allows you to customize the response in great detail. Web API’s attention to detail in the HTTP spec really shows; many HTTP options are exposed as properties and enumerations with detailed IntelliSense comments. Even if you’re new to building REST-based interfaces, the API guides you in the right direction for returning valid responses and response codes. For example, assume that I always want to return JSON from the GetAlbums() controller method and ignore the default media type content negotiation. To do this, I can adjust the output format and headers as shown in Listing 4.public HttpResponseMessage GetAlbums() { var albums = AlbumData.Current.OrderBy(alb => alb.Artist); // Create a new HttpResponse with Json Formatter explicitly var resp = new HttpResponseMessage(HttpStatusCode.OK); resp.Content = new ObjectContent<IEnumerable<Album>>( albums, new JsonMediaTypeFormatter()); // Get Default Formatter based on Content Negotiation //var resp = Request.CreateResponse<IEnumerable<Album>>(HttpStatusCode.OK, albums); resp.Headers.ConnectionClose = true; resp.Headers.CacheControl = new CacheControlHeaderValue(); resp.Headers.CacheControl.Public = true; return resp; } This example returns the same IEnumerable<Album> value, but it wraps the response into an HttpResponseMessage so you can control the entire HTTP message result including the headers, formatter and status code. In Listing 4, I explicitly specify the formatter using the JsonMediaTypeFormatter to always force the content to JSON. If you prefer to use the default content negotiation with HttpResponseMessage results, you can create the Response instance using the Request.CreateResponse method:var resp = Request.CreateResponse<IEnumerable<Album>>(HttpStatusCode.OK, albums); This provides you an HttpResponse object that's pre-configured with the default formatter based on Content Negotiation. Once you have an HttpResponse object you can easily control most HTTP aspects on this object. What's sweet here is that there are many more detailed properties on HttpResponse than the core ASP.NET Response object, with most options being explicitly configurable with enumerations that make it easy to pick the right headers and response codes from a list of valid codes. It makes HTTP features available much more discoverable even for non-hardcore REST/HTTP geeks. Non-Serialized Results The output returned doesn’t have to be a serialized value but can also be raw data, like strings, binary data or streams. You can use the HttpResponseMessage.Content object to set a number of common Content classes. Listing 5 shows how to return a binary image using the ByteArrayContent class from a Controller method. [HttpGet] public HttpResponseMessage AlbumArt(string title) { var album = AlbumData.Current.FirstOrDefault(abl => abl.AlbumName.StartsWith(title)); if (album == null) { var resp = Request.CreateResponse<ApiMessageError>( HttpStatusCode.NotFound, new ApiMessageError("Album not found")); return resp; } // kinda silly - we would normally serve this directly // but hey - it's a demo. var http = new WebClient(); var imageData = http.DownloadData(album.AlbumImageUrl); // create response and return var result = new HttpResponseMessage(HttpStatusCode.OK); result.Content = new ByteArrayContent(imageData); result.Content.Headers.ContentType = new MediaTypeHeaderValue("image/jpeg"); return result; } The image retrieval from Amazon is contrived, but it shows how to return binary data using ByteArrayContent. It also demonstrates that you can easily return multiple types of content from a single controller method, which is actually quite common. If an error occurs - such as a resource can’t be found or a validation error – you can return an error response to the client that’s very specific to the error. In GetAlbumArt(), if the album can’t be found, we want to return a 404 Not Found status (and realistically no error, as it’s an image). Note that if you are not using HTTP Verb-based routing or not accessing a method that starts with Get/Post etc., you have to specify one or more HTTP Verb attributes on the method explicitly. Here, I used the [HttpGet] attribute to serve the image. Another option to handle the error could be to return a fixed placeholder image if no album could be matched or the album doesn’t have an image. When returning an error code, you can also return a strongly typed response to the client. For example, you can set the 404 status code and also return a custom error object (ApiMessageError is a class I defined) like this:return Request.CreateResponse<ApiMessageError>( HttpStatusCode.NotFound, new ApiMessageError("Album not found") ); If the album can be found, the image will be returned. The image is downloaded into a byte[] array, and then assigned to the result’s Content property. I created a new ByteArrayContent instance and assigned the image’s bytes and the content type so that it displays properly in the browser. There are other content classes available: StringContent, StreamContent, ByteArrayContent, MultipartContent, and ObjectContent are at your disposal to return just about any kind of content. You can create your own Content classes if you frequently return custom types and handle the default formatter assignments that should be used to send the data out . Although HttpResponseMessage results require more code than returning a plain .NET value from a method, it allows much more control over the actual HTTP processing than automatic processing. It also makes it much easier to test your controller methods as you get a response object that you can check for specific status codes and output messages rather than just a result value. Routing Again Ok, let’s get back to the image example. Using the original routing we have setup using HTTP Verb routing there's no good way to serve the image. In order to return my album art image I’d like to use a URL like this: http://localhost/aspnetWebApi/albums/Dirty%20Deeds/image In order to create a URL like this, I have to create a new Controller because my earlier routes pointed to the AlbumApiController using HTTP Verb routing. HTTP Verb based routing is great for representing a single set of resources such as albums. You can map operations like add, delete, update and read easily using HTTP Verbs. But you cannot mix action based routing into a an HTTP Verb routing controller - you can only map HTTP Verbs and each method has to be unique based on parameter signature. You can't have multiple GET operations to methods with the same signature. So GetImage(string id) and GetAlbum(string title) are in conflict in an HTTP GET routing scenario. In fact, I was unable to make the above Image URL work with any combination of HTTP Verb plus Custom routing using the single Albums controller. There are number of ways around this, but all involve additional controllers. Personally, I think it’s easier to use explicit Action routing and then add custom routes if you need to simplify your URLs further. So in order to accommodate some of the other examples, I created another controller – AlbumRpcApiController – to handle all requests that are explicitly routed via actions (/albums/rpc/AlbumArt) or are custom routed with explicit routes defined in the HttpConfiguration. I added the AlbumArt() method to this new AlbumRpcApiController class. For the image URL to work with the new AlbumRpcApiController, you need a custom route placed before the default route from Listing 1.RouteTable.Routes.MapHttpRoute( name: "AlbumRpcApiAction", routeTemplate: "albums/rpc/{action}/{title}", defaults: new { title = RouteParameter.Optional, controller = "AlbumRpcApi", action = "GetAblums" } ); Now I can use either of the following URLs to access the image: Custom route: (/albums/rpc/{title}/image)http://localhost/aspnetWebApi/albums/PowerAge/image Action route: (/albums/rpc/action/{title})http://localhost/aspnetWebAPI/albums/rpc/albumart/PowerAge Sending Data to the Server To send data to the server and add a new album, you can use an HTTP POST operation. Since I’m using HTTP Verb-based routing in the original AlbumApiController, I can implement a method called PostAlbum()to accept a new album from the client. Listing 6 shows the Web API code to add a new album.public HttpResponseMessage PostAlbum(Album album) { if (!this.ModelState.IsValid) { // my custom error class var error = new ApiMessageError() { message = "Model is invalid" }; // add errors into our client error model for client foreach (var prop in ModelState.Values) { var modelError = prop.Errors.FirstOrDefault(); if (!string.IsNullOrEmpty(modelError.ErrorMessage)) error.errors.Add(modelError.ErrorMessage); else error.errors.Add(modelError.Exception.Message); } return Request.CreateResponse<ApiMessageError>(HttpStatusCode.Conflict, error); } // update song id which isn't provided foreach (var song in album.Songs) song.AlbumId = album.Id; // see if album exists already var matchedAlbum = AlbumData.Current .SingleOrDefault(alb => alb.Id == album.Id || alb.AlbumName == album.AlbumName); if (matchedAlbum == null) AlbumData.Current.Add(album); else matchedAlbum = album; // return a string to show that the value got here var resp = Request.CreateResponse(HttpStatusCode.OK, string.Empty); resp.Content = new StringContent(album.AlbumName + " " + album.Entered.ToString(), Encoding.UTF8, "text/plain"); return resp; } The PostAlbum() method receives an album parameter, which is automatically deserialized from the POST buffer the client sent. The data passed from the client can be either XML or JSON. Web API automatically figures out what format it needs to deserialize based on the content type and binds the content to the album object. Web API uses model binding to bind the request content to the parameter(s) of controller methods. Like MVC you can check the model by looking at ModelState.IsValid. If it’s not valid, you can run through the ModelState.Values collection and check each binding for errors. Here I collect the error messages into a string array that gets passed back to the client via the result ApiErrorMessage object. When a binding error occurs, you’ll want to return an HTTP error response and it’s best to do that with an HttpResponseMessage result. In Listing 6, I used a custom error class that holds a message and an array of detailed error messages for each binding error. I used this object as the content to return to the client along with my Conflict HTTP Status Code response. If binding succeeds, the example returns a string with the name and date entered to demonstrate that you captured the data. Normally, a method like this should return a Boolean or no response at all (HttpStatusCode.NoConent). The sample uses a simple static list to hold albums, so once you’ve added the album using the Post operation, you can hit the /albums/ URL to see that the new album was added. The client jQuery code to call the POST operation from the client with jQuery is shown in Listing 7. var id = new Date().getTime().toString(); var album = { "Id": id, "AlbumName": "Power Age", "Artist": "AC/DC", "YearReleased": 1977, "Entered": "2002-03-11T18:24:43.5580794-10:00", "AlbumImageUrl": http://ecx.images-amazon.com/images/…, "AmazonUrl": http://www.amazon.com/…, "Songs": [ { "SongName": "Rock 'n Roll Damnation", "SongLength": 3.12}, { "SongName": "Downpayment Blues", "SongLength": 4.22 }, { "SongName": "Riff Raff", "SongLength": 2.42 } ] } $.ajax( { url: "albums/", type: "POST", contentType: "application/json", data: JSON.stringify(album), processData: false, beforeSend: function (xhr) { // not required since JSON is default output xhr.setRequestHeader("Accept", "application/json"); }, success: function (result) { // reload list of albums page.loadAlbums(); }, error: function (xhr, status, p3, p4) { var err = "Error"; if (xhr.responseText && xhr.responseText[0] == "{") err = JSON.parse(xhr.responseText).message; alert(err); } }); The code in Listing 7 creates an album object in JavaScript to match the structure of the .NET Album class. This object is passed to the $.ajax() function to send to the server as POST. The data is turned into JSON and the content type set to application/json so that the server knows what to convert when deserializing in the Album instance. The jQuery code hooks up success and failure events. Success returns the result data, which is a string that’s echoed back with an alert box. If an error occurs, jQuery returns the XHR instance and status code. You can check the XHR to see if a JSON object is embedded and if it is, you can extract it by de-serializing it and accessing the .message property. REST standards suggest that updates to existing resources should use PUT operations. REST standards aside, I’m not a big fan of separating out inserts and updates so I tend to have a single method that handles both. But if you want to follow REST suggestions, you can create a PUT method that handles updates by forwarding the PUT operation to the POST method:public HttpResponseMessage PutAlbum(Album album) { return PostAlbum(album); } To make the corresponding $.ajax() call, all you have to change from Listing 7 is the type: from POST to PUT. Model Binding with UrlEncoded POST Variables In the example in Listing 7 I used JSON objects to post a serialized object to a server method that accepted an strongly typed object with the same structure, which is a common way to send data to the server. However, Web API supports a number of different ways that data can be received by server methods. For example, another common way is to use plain UrlEncoded POST values to send to the server. Web API supports Model Binding that works similar (but not the same) as MVC's model binding where POST variables are mapped to properties of object parameters of the target method. This is actually quite common for AJAX calls that want to avoid serialization and the potential requirement of a JSON parser on older browsers. For example, using jQUery you might use the $.post() method to send a new album to the server (albeit one without songs) using code like the following:$.post("albums/",{AlbumName: "Dirty Deeds", YearReleased: 1976 … },albumPostCallback); Although the code looks very similar to the client code we used before passing JSON, here the data passed is URL encoded values (AlbumName=Dirty+Deeds&YearReleased=1976 etc.). Web API then takes this POST data and maps each of the POST values to the properties of the Album object in the method's parameter. Although the client code is different the server can both handle the JSON object, or the UrlEncoded POST values. Dynamic Access to POST Data There are also a few options available to dynamically access POST data, if you know what type of data you're dealing with. If you have POST UrlEncoded values, you can dynamically using a FormsDataCollection:[HttpPost] public string PostAlbum(FormDataCollection form) { return string.Format("{0} - released {1}", form.Get("AlbumName"),form.Get("RearReleased")); } The FormDataCollection is a very simple object, that essentially provides the same functionality as Request.Form[] in ASP.NET. Request.Form[] still works if you're running hosted in an ASP.NET application. However as a general rule, while ASP.NET's functionality is always available when running Web API hosted inside of an ASP.NET application, using the built in classes specific to Web API makes it possible to run Web API applications in a self hosted environment outside of ASP.NET. If your client is sending JSON to your server, and you don't want to map the JSON to a strongly typed object because you only want to retrieve a few simple values, you can also accept a JObject parameter in your API methods:[HttpPost] public string PostAlbum(JObject jsonData) { dynamic json = jsonData; JObject jalbum = json.Album; JObject juser = json.User; string token = json.UserToken; var album = jalbum.ToObject<Album>(); var user = juser.ToObject<User>(); return String.Format("{0} {1} {2}", album.AlbumName, user.Name, token); } There quite a few options available to you to receive data with Web API, which gives you more choices for the right tool for the job. Unfortunately one shortcoming of Web API is that POST data is always mapped to a single parameter. This means you can't pass multiple POST parameters to methods that receive POST data. It's possible to accept multiple parameters, but only one can map to the POST content - the others have to come from the query string or route values. I have a couple of Blog POSTs that explain what works and what doesn't here: Passing multiple POST parameters to Web API Controller Methods Mapping UrlEncoded POST Values in ASP.NET Web API Handling Delete Operations Finally, to round out the server API code of the album example we've been discussin, here’s the DELETE verb controller method that allows removal of an album by its title:public HttpResponseMessage DeleteAlbum(string title) { var matchedAlbum = AlbumData.Current.Where(alb => alb.AlbumName == title) .SingleOrDefault(); if (matchedAlbum == null) return new HttpResponseMessage(HttpStatusCode.NotFound); AlbumData.Current.Remove(matchedAlbum); return new HttpResponseMessage(HttpStatusCode.NoContent); } To call this action method using jQuery, you can use:$(".removeimage").live("click", function () { var $el = $(this).parent(".album"); var txt = $el.find("a").text(); $.ajax({ url: "albums/" + encodeURIComponent(txt), type: "Delete", success: function (result) { $el.fadeOut().remove(); }, error: jqError }); } Note the use of the DELETE verb in the $.ajax() call, which routes to DeleteAlbum on the server. DELETE is a non-content operation, so you supply a resource ID (the title) via route value or the querystring. Routing Conflicts In all requests with the exception of the AlbumArt image example shown so far, I used HTTP Verb routing that I set up in Listing 1. HTTP Verb Routing is a recommendation that is in line with typical REST access to HTTP resources. However, it takes quite a bit of effort to create REST-compliant API implementations based only on HTTP Verb routing only. You saw one example that didn’t really fit – the return of an image where I created a custom route albums/{title}/image that required creation of a second controller and a custom route to work. HTTP Verb routing to a controller does not mix with custom or action routing to the same controller because of the limited mapping of HTTP verbs imposed by HTTP Verb routing. To understand some of the problems with verb routing, let’s look at another example. Let’s say you create a GetSortableAlbums() method like this and add it to the original AlbumApiController accessed via HTTP Verb routing:[HttpGet] public IQueryable<Album> SortableAlbums() { var albums = AlbumData.Current; // generally should be done only on actual queryable results (EF etc.) // Done here because we're running with a static list but otherwise might be slow return albums.AsQueryable(); } If you compile this code and try to now access the /albums/ link, you get an error: Multiple Actions were found that match the request. HTTP Verb routing only allows access to one GET operation per parameter/route value match. If more than one method exists with the same parameter signature, it doesn’t work. As I mentioned earlier for the image display, the only solution to get this method to work is to throw it into another controller. Because I already set up the AlbumRpcApiController I can add the method there. First, I should rename the method to SortableAlbums() so I’m not using a Get prefix for the method. This also makes the action parameter look cleaner in the URL - it looks less like a method and more like a noun. I can then create a new route that handles direct-action mapping:RouteTable.Routes.MapHttpRoute( name: "AlbumRpcApiAction", routeTemplate: "albums/rpc/{action}/{title}", defaults: new { title = RouteParameter.Optional, controller = "AlbumRpcApi", action = "GetAblums" } ); As I am explicitly adding a route segment – rpc – into the route template, I can now reference explicit methods in the Web API controller using URLs like this: http://localhost/AspNetWebApi/rpc/SortableAlbums Error Handling I’ve already done some minimal error handling in the examples. For example in Listing 6, I detected some known-error scenarios like model validation failing or a resource not being found and returning an appropriate HttpResponseMessage result. But what happens if your code just blows up or causes an exception? If you have a controller method, like this:[HttpGet] public void ThrowException() { throw new UnauthorizedAccessException("Unauthorized Access Sucka"); } You can call it with this: http://localhost/AspNetWebApi/albums/rpc/ThrowException The default exception handling displays a 500-status response with the serialized exception on the local computer only. When you connect from a remote computer, Web API throws back a 500 HTTP Error with no data returned (IIS then adds its HTML error page). The behavior is configurable in the GlobalConfiguration:GlobalConfiguration .Configuration .IncludeErrorDetailPolicy = IncludeErrorDetailPolicy.Never; If you want more control over your error responses sent from code, you can throw explicit error responses yourself using HttpResponseException. When you throw an HttpResponseException the response parameter is used to generate the output for the Controller action. [HttpGet] public void ThrowError() { var resp = Request.CreateResponse<ApiMessageError>( HttpStatusCode.BadRequest, new ApiMessageError("Your code stinks!")); throw new HttpResponseException(resp); } Throwing an HttpResponseException stops the processing of the controller method and immediately returns the response you passed to the exception. Unlike other Exceptions fired inside of WebAPI, HttpResponseException bypasses the Exception Filters installed and instead just outputs the response you provide. In this case, the serialized ApiMessageError result string is returned in the default serialization format – XML or JSON. You can pass any content to HttpResponseMessage, which includes creating your own exception objects and consistently returning error messages to the client. Here’s a small helper method on the controller that you might use to send exception info back to the client consistently:private void ThrowSafeException(string message, HttpStatusCode statusCode = HttpStatusCode.BadRequest) { var errResponse = Request.CreateResponse<ApiMessageError>(statusCode, new ApiMessageError() { message = message }); throw new HttpResponseException(errResponse); } You can then use it to output any captured errors from code:[HttpGet] public void ThrowErrorSafe() { try { List<string> list = null; list.Add("Rick"); } catch (Exception ex) { ThrowSafeException(ex.Message); } } Exception Filters Another more global solution is to create an Exception Filter. Filters in Web API provide the ability to pre- and post-process controller method operations. An exception filter looks at all exceptions fired and then optionally creates an HttpResponseMessage result. Listing 8 shows an example of a basic Exception filter implementation.public class UnhandledExceptionFilter : ExceptionFilterAttribute { public override void OnException(HttpActionExecutedContext context) { HttpStatusCode status = HttpStatusCode.InternalServerError; var exType = context.Exception.GetType(); if (exType == typeof(UnauthorizedAccessException)) status = HttpStatusCode.Unauthorized; else if (exType == typeof(ArgumentException)) status = HttpStatusCode.NotFound; var apiError = new ApiMessageError() { message = context.Exception.Message }; // create a new response and attach our ApiError object // which now gets returned on ANY exception result var errorResponse = context.Request.CreateResponse<ApiMessageError>(status, apiError); context.Response = errorResponse; base.OnException(context); } } Exception Filter Attributes can be assigned to an ApiController class like this:[UnhandledExceptionFilter] public class AlbumRpcApiController : ApiController or you can globally assign it to all controllers by adding it to the HTTP Configuration's Filters collection:GlobalConfiguration.Configuration.Filters.Add(new UnhandledExceptionFilter()); The latter is a great way to get global error trapping so that all errors (short of hard IIS errors and explicit HttpResponseException errors) return a valid error response that includes error information in the form of a known-error object. Using a filter like this allows you to throw an exception as you normally would and have your filter create a response in the appropriate output format that the client expects. For example, an AJAX application can on failure expect to see a JSON error result that corresponds to the real error that occurred rather than a 500 error along with HTML error page that IIS throws up. You can even create some custom exceptions so you can differentiate your own exceptions from unhandled system exceptions - you often don't want to display error information from 'unknown' exceptions as they may contain sensitive system information or info that's not generally useful to users of your application/site. This is just one example of how ASP.NET Web API is configurable and extensible. Exception filters are just one example of how you can plug-in into the Web API request flow to modify output. Many more hooks exist and I’ll take a closer look at extensibility in Part 2 of this article in the future. Summary Web API is a big improvement over previous Microsoft REST and AJAX toolkits. The key features to its usefulness are its ease of use with simple controller based logic, familiar MVC-style routing, low configuration impact, extensibility at all levels and tight attention to exposing and making HTTP semantics easily discoverable and easy to use. Although none of the concepts used in Web API are new or radical, Web API combines the best of previous platforms into a single framework that’s highly functional, easy to work with, and extensible to boot. I think that Microsoft has hit a home run with Web API. Related Resources Where does ASP.NET Web API fit? Sample Source Code on GitHub Passing multiple POST parameters to Web API Controller Methods Mapping UrlEncoded POST Values in ASP.NET Web API Creating a JSONP Formatter for ASP.NET Web API Removing the XML Formatter from ASP.NET Web API Applications© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Using the West Wind Web Toolkit to set up AJAX and REST Services

- by Rick Strahl

I frequently get questions about which option to use for creating AJAX and REST backends for ASP.NET applications. There are many solutions out there to do this actually, but when I have a choice - not surprisingly - I fall back to my own tools in the West Wind West Wind Web Toolkit. I've talked a bunch about the 'in-the-box' solutions in the past so for a change in this post I'll talk about the tools that I use in my own and customer applications to handle AJAX and REST based access to service resources using the West Wind West Wind Web Toolkit. Let me preface this by saying that I like things to be easy. Yes flexible is very important as well but not at the expense of over-complexity. The goal I've had with my tools is make it drop dead easy, with good performance while providing the core features that I'm after, which are: Easy AJAX/JSON Callbacks Ability to return any kind of non JSON content (string, stream, byte[], images) Ability to work with both XML and JSON interchangeably for input/output Access endpoints via POST data, RPC JSON calls, GET QueryString values or Routing interface Easy to use generic JavaScript client to make RPC calls (same syntax, just what you need) Ability to create clean URLS with Routing Ability to use standard ASP.NET HTTP Stack for HTTP semantics It's all about options! In this post I'll demonstrate most of these features (except XML) in a few simple and short samples which you can download. So let's take a look and see how you can build an AJAX callback solution with the West Wind Web Toolkit. Installing the Toolkit Assemblies The easiest and leanest way of using the Toolkit in your Web project is to grab it via NuGet: West Wind Web and AJAX Utilities (Westwind.Web) and drop it into the project by right clicking in your Project and choosing Manage NuGet Packages from anywhere in the Project. When done you end up with your project looking like this: What just happened? Nuget added two assemblies - Westwind.Web and Westwind.Utilities and the client ww.jquery.js library. It also added a couple of references into web.config: The default namespaces so they can be accessed in pages/views and a ScriptCompressionModule that the toolkit optionally uses to compress script resources served from within the assembly (namely ww.jquery.js and optionally jquery.js). Creating a new Service The West Wind Web Toolkit supports several ways of creating and accessing AJAX services, but for this post I'll stick to the lower level approach that works from any plain HTML page or of course MVC, WebForms, WebPages. There's also a WebForms specific control that makes this even easier but I'll leave that for another post. So, to create a new standalone AJAX/REST service we can create a new HttpHandler in the new project either as a pure class based handler or as a generic .ASHX handler. Both work equally well, but generic handlers don't require any web.config configuration so I'll use that here. In the root of the project add a Generic Handler. I'm going to call this one StockService.ashx. Once the handler has been created, edit the code and remove all of the handler body code. Then change the base class to CallbackHandler and add methods that have a [CallbackMethod] attribute. Here's the modified base handler implementation now looks like with an added HelloWorld method: using System; using Westwind.Web; namespace WestWindWebAjax { /// <summary> /// Handler implements CallbackHandler to provide REST/AJAX services /// </summary> public class SampleService : CallbackHandler { [CallbackMethod] public string HelloWorld(string name) { return "Hello " + name + ". Time is: " + DateTime.Now.ToString(); } } } Notice that the class inherits from CallbackHandler and that the HelloWorld service method is marked up with [CallbackMethod]. We're done here. Services Urlbased Syntax Once you compile, the 'service' is live can respond to requests. All CallbackHandlers support input in GET and POST formats, and can return results as JSON or XML. To check our fancy HelloWorld method we can now access the service like this: http://localhost/WestWindWebAjax/StockService.ashx?Method=HelloWorld&name=Rick which produces a default JSON response - in this case a string (wrapped in quotes as it's JSON): (note by default JSON will be downloaded by most browsers not displayed - various options are available to view JSON right in the browser) If I want to return the same data as XML I can tack on a &format=xml at the end of the querystring which produces: <string>Hello Rick. Time is: 11/1/2011 12:11:13 PM</string> Cleaner URLs with Routing Syntax If you want cleaner URLs for each operation you can also configure custom routes on a per URL basis similar to the way that WCF REST does. To do this you need to add a new RouteHandler to your application's startup code in global.asax.cs one for each CallbackHandler based service you create: protected void Application_Start(object sender, EventArgs e) { CallbackHandlerRouteHandler.RegisterRoutes<StockService>(RouteTable.Routes); } With this code in place you can now add RouteUrl properties to any of your service methods. For the HelloWorld method that doesn't make a ton of sense but here is what a routed clean URL might look like in definition: [CallbackMethod(RouteUrl="stocks/HelloWorld/{name}")] public string HelloWorld(string name) { return "Hello " + name + ". Time is: " + DateTime.Now.ToString(); } The same URL I previously used now becomes a bit shorter and more readable with: http://localhost/WestWindWebAjax/HelloWorld/Rick It's an easy way to create cleaner URLs and still get the same functionality. Calling the Service with $.getJSON() Since the result produced is JSON you can now easily consume this data using jQuery's getJSON method. First we need a couple of scripts - jquery.js and ww.jquery.js in the page: <!DOCTYPE html> <html> <head> <link href="Css/Westwind.css" rel="stylesheet" type="text/css" /> <script src="scripts/jquery.min.js" type="text/javascript"></script> <script src="scripts/ww.jquery.min.js" type="text/javascript"></script> </head> <body> Next let's add a small HelloWorld example form (what else) that has a single textbox to type a name, a button and a div tag to receive the result: <fieldset> <legend>Hello World</legend> Please enter a name: <input type="text" name="txtHello" id="txtHello" value="" /> <input type="button" id="btnSayHello" value="Say Hello (POST)" /> <input type="button" id="btnSayHelloGet" value="Say Hello (GET)" /> <div id="divHelloMessage" class="errordisplay" style="display:none;width: 450px;" > </div> </fieldset> Then to call the HelloWorld method a little jQuery is used to hook the document startup and the button click followed by the $.getJSON call to retrieve the data from the server. <script type="text/javascript"> $(document).ready(function () { $("#btnSayHelloGet").click(function () { $.getJSON("SampleService.ashx", { Method: "HelloWorld", name: $("#txtHello").val() }, function (result) { $("#divHelloMessage") .text(result) .fadeIn(1000); }); });</script> .getJSON() expects a full URL to the endpoint of our service, which is the ASHX file. We can either provide a full URL (SampleService.ashx?Method=HelloWorld&name=Rick) or we can just provide the base URL and an object that encodes the query string parameters for us using an object map that has a property that matches each parameter for the server method. We can also use the clean URL routing syntax, but using the object parameter encoding actually is safer as the parameters will get properly encoded by jQuery. The result returned is whatever the result on the server method is - in this case a string. The string is applied to the divHelloMessage element and we're done. Obviously this is a trivial example, but it demonstrates the basics of getting a JSON response back to the browser. AJAX Post Syntax - using ajaxCallMethod() The previous example allows you basic control over the data that you send to the server via querystring parameters. This works OK for simple values like short strings, numbers and boolean values, but doesn't really work if you need to pass something more complex like an object or an array back up to the server. To handle traditional RPC type messaging where the idea is to map server side functions and results to a client side invokation, POST operations can be used. The easiest way to use this functionality is to use ww.jquery.js and the ajaxCallMethod() function. ww.jquery wraps jQuery's AJAX functions and knows implicitly how to call a CallbackServer method with parameters and parse the result. Let's look at another simple example that posts a simple value but returns something more interesting. Let's start with the service method: [CallbackMethod(RouteUrl="stocks/{symbol}")] public StockQuote GetStockQuote(string symbol) { Response.Cache.SetExpires(DateTime.UtcNow.Add(new TimeSpan(0, 2, 0))); StockServer server = new StockServer(); var quote = server.GetStockQuote(symbol); if (quote == null) throw new ApplicationException("Invalid Symbol passed."); return quote; } This sample utilizes a small StockServer helper class (included in the sample) that downloads a stock quote from Yahoo's financial site via plain HTTP GET requests and formats it into a StockQuote object. Lets create a small HTML block that lets us query for the quote and display it: <fieldset> <legend>Single Stock Quote</legend> Please enter a stock symbol: <input type="text" name="txtSymbol" id="txtSymbol" value="msft" /> <input type="button" id="btnStockQuote" value="Get Quote" /> <div id="divStockDisplay" class="errordisplay" style="display:none; width: 450px;"> <div class="label-left">Company:</div> <div id="stockCompany"></div> <div class="label-left">Last Price:</div> <div id="stockLastPrice"></div> <div class="label-left">Quote Time:</div> <div id="stockQuoteTime"></div> </div> </fieldset> The final result looks something like this: Let's hook up the button handler to fire the request and fill in the data as shown: $("#btnStockQuote").click(function () { ajaxCallMethod("SampleService.ashx", "GetStockQuote", [$("#txtSymbol").val()], function (quote) { $("#divStockDisplay").show().fadeIn(1000); $("#stockCompany").text(quote.Company + " (" + quote.Symbol + ")"); $("#stockLastPrice").text(quote.LastPrice); $("#stockQuoteTime").text(quote.LastQuoteTime.formatDate("MMM dd, HH:mm EST")); }, onPageError); }); So we point at SampleService.ashx and the GetStockQuote method, passing a single parameter of the input symbol value. Then there are two handlers for success and failure callbacks. The success handler is the interesting part - it receives the stock quote as a result and assigns its values to various 'holes' in the stock display elements. The data that comes back over the wire is JSON and it looks like this: { "Symbol":"MSFT", "Company":"Microsoft Corpora", "OpenPrice":26.11, "LastPrice":26.01, "NetChange":0.02, "LastQuoteTime":"2011-11-03T02:00:00Z", "LastQuoteTimeString":"Nov. 11, 2011 4:20pm" } which is an object representation of the data. JavaScript can evaluate this JSON string back into an object easily and that's the reslut that gets passed to the success function. The quote data is then applied to existing page content by manually selecting items and applying them. There are other ways to do this more elegantly like using templates, but here we're only interested in seeing how the data is returned. The data in the object is typed - LastPrice is a number and QuoteTime is a date. Note about the date value: JavaScript doesn't have a date literal although the JSON embedded ISO string format used above ("2011-11-03T02:00:00Z") is becoming fairly standard for JSON serializers. However, JSON parsers don't deserialize dates by default and return them by string. This is why the StockQuote actually returns a string value of LastQuoteTimeString for the same date. ajaxMethodCallback always converts dates properly into 'real' dates and the example above uses the real date value along with a .formatDate() data extension (also in ww.jquery.js) to display the raw date properly. Errors and Exceptions So what happens if your code fails? For example if I pass an invalid stock symbol to the GetStockQuote() method you notice that the code does this: if (quote == null) throw new ApplicationException("Invalid Symbol passed."); CallbackHandler automatically pushes the exception message back to the client so it's easy to pick up the error message. Regardless of what kind of error occurs: Server side, client side, protocol errors - any error will fire the failure handler with an error object parameter. The error is returned to the client via a JSON response in the error callback. In the previous examples I called onPageError which is a generic routine in ww.jquery that displays a status message on the bottom of the screen. But of course you can also take over the error handling yourself: $("#btnStockQuote").click(function () { ajaxCallMethod("SampleService.ashx", "GetStockQuote", [$("#txtSymbol").val()], function (quote) { $("#divStockDisplay").fadeIn(1000); $("#stockCompany").text(quote.Company + " (" + quote.Symbol + ")"); $("#stockLastPrice").text(quote.LastPrice); $("#stockQuoteTime").text(quote.LastQuoteTime.formatDate("MMM dd, hh:mmt")); }, function (error, xhr) { $("#divErrorDisplay").text(error.message).fadeIn(1000); }); }); The error object has a isCallbackError, message and stackTrace properties, the latter of which is only populated when running in Debug mode, and this object is returned for all errors: Client side, transport and server side errors. Regardless of which type of error you get the same object passed (as well as the XHR instance optionally) which makes for a consistent error retrieval mechanism. Specifying HttpVerbs You can also specify HTTP Verbs that are allowed using the AllowedHttpVerbs option on the CallbackMethod attribute: [CallbackMethod(AllowedHttpVerbs=HttpVerbs.GET | HttpVerbs.POST)] public string HelloWorld(string name) { … } If you're building REST style API's this might be useful to force certain request semantics onto the client calling. For the above if call with a non-allowed HttpVerb the request returns a 405 error response along with a JSON (or XML) error object result. The default behavior is to allow all verbs access (HttpVerbs.All). Passing in object Parameters Up to now the parameters I passed were very simple. But what if you need to send something more complex like an object or an array? Let's look at another example now that passes an object from the client to the server. Keeping with the Stock theme here lets add a method called BuyOrder that lets us buy some shares for a stock. Consider the following service method that receives an StockBuyOrder object as a parameter: [CallbackMethod] public string BuyStock(StockBuyOrder buyOrder) { var server = new StockServer(); var quote = server.GetStockQuote(buyOrder.Symbol); if (quote == null) throw new ApplicationException("Invalid or missing stock symbol."); return string.Format("You're buying {0} shares of {1} ({2}) stock at {3} for a total of {4} on {5}.", buyOrder.Quantity, quote.Company, quote.Symbol, quote.LastPrice.ToString("c"), (quote.LastPrice * buyOrder.Quantity).ToString("c"), buyOrder.BuyOn.ToString("MMM d")); } public class StockBuyOrder { public string Symbol { get; set; } public int Quantity { get; set; } public DateTime BuyOn { get; set; } public StockBuyOrder() { BuyOn = DateTime.Now; } } This is a contrived do-nothing example that simply echoes back what was passed in, but it demonstrates how you can pass complex data to a callback method. On the client side we now have a very simple form that captures the three values on a form: <fieldset> <legend>Post a Stock Buy Order</legend> Enter a symbol: <input type="text" name="txtBuySymbol" id="txtBuySymbol" value="GLD" />   Qty: <input type="text" name="txtBuyQty" id="txtBuyQty" value="10" style="width: 50px" />   Buy on: <input type="text" name="txtBuyOn" id="txtBuyOn" value="<%= DateTime.Now.ToString("d") %>" style="width: 70px;" /> <input type="button" id="btnBuyStock" value="Buy Stock" /> <div id="divStockBuyMessage" class="errordisplay" style="display:none"></div> </fieldset> The completed form and demo then looks something like this: The client side code that picks up the input values and assigns them to object properties and sends the AJAX request looks like this: $("#btnBuyStock").click(function () { // create an object map that matches StockBuyOrder signature var buyOrder = { Symbol: $("#txtBuySymbol").val(), Quantity: $("#txtBuyQty").val() * 1, // number Entered: new Date() } ajaxCallMethod("SampleService.ashx", "BuyStock", [buyOrder], function (result) { $("#divStockBuyMessage").text(result).fadeIn(1000); }, onPageError); }); The code creates an object and attaches the properties that match the server side object passed to the BuyStock method. Each property that you want to update needs to be included and the type must match (ie. string, number, date in this case). Any missing properties will not be set but also not cause any errors. Pass POST data instead of Objects In the last example I collected a bunch of values from form variables and stuffed them into object variables in JavaScript code. While that works, often times this isn't really helping - I end up converting my types on the client and then doing another conversion on the server. If lots of input controls are on a page and you just want to pick up the values on the server via plain POST variables - that can be done too - and it makes sense especially if you're creating and filling the client side object only to push data to the server. Let's add another method to the server that once again lets us buy a stock. But this time let's not accept a parameter but rather send POST data to the server. Here's the server method receiving POST data: [CallbackMethod] public string BuyStockPost() { StockBuyOrder buyOrder = new StockBuyOrder(); buyOrder.Symbol = Request.Form["txtBuySymbol"]; ; int qty; int.TryParse(Request.Form["txtBuyQuantity"], out qty); buyOrder.Quantity = qty; DateTime time; DateTime.TryParse(Request.Form["txtBuyBuyOn"], out time); buyOrder.BuyOn = time; // Or easier way yet //FormVariableBinder.Unbind(buyOrder,null,"txtBuy"); var server = new StockServer(); var quote = server.GetStockQuote(buyOrder.Symbol); if (quote == null) throw new ApplicationException("Invalid or missing stock symbol."); return string.Format("You're buying {0} shares of {1} ({2}) stock at {3} for a total of {4} on {5}.", buyOrder.Quantity, quote.Company, quote.Symbol, quote.LastPrice.ToString("c"), (quote.LastPrice * buyOrder.Quantity).ToString("c"), buyOrder.BuyOn.ToString("MMM d")); } Clearly we've made this server method take more code than it did with the object parameter. We've basically moved the parameter assignment logic from the client to the server. As a result the client code to call this method is now a bit shorter since there's no client side shuffling of values from the controls to an object. $("#btnBuyStockPost").click(function () { ajaxCallMethod("SampleService.ashx", "BuyStockPost", [], // Note: No parameters - function (result) { $("#divStockBuyMessage").text(result).fadeIn(1000); }, onPageError, // Force all page Form Variables to be posted { postbackMode: "Post" }); }); The client simply calls the BuyStockQuote method and pushes all the form variables from the page up to the server which parses them instead. The feature that makes this work is one of the options you can pass to the ajaxCallMethod() function: { postbackMode: "Post" }); which directs the function to include form variable POST data when making the service call. Other options include PostNoViewState (for WebForms to strip out WebForms crap vars), PostParametersOnly (default), None. If you pass parameters those are always posted to the server except when None is set. The above code can be simplified a bit by using the FormVariableBinder helper, which can unbind form variables directly into an object: FormVariableBinder.Unbind(buyOrder,null,"txtBuy"); which replaces the manual Request.Form[] reading code. It receives the object to unbind into, a string of properties to skip, and an optional prefix which is stripped off form variables to match property names. The component is similar to the MVC model binder but it's independent of MVC. Returning non-JSON Data CallbackHandler also supports returning non-JSON/XML data via special return types. You can return raw non-JSON encoded strings like this: [CallbackMethod(ReturnAsRawString=true,ContentType="text/plain")] public string HelloWorldNoJSON(string name) { return "Hello " + name + ". Time is: " + DateTime.Now.ToString(); } Calling this method results in just a plain string - no JSON encoding with quotes around the result. This can be useful if your server handling code needs to return a string or HTML result that doesn't fit well for a page or other UI component. Any string output can be returned. You can also return binary data. Stream, byte[] and Bitmap/Image results are automatically streamed back to the client. Notice that you should set the ContentType of the request either on the CallbackMethod attribute or using Response.ContentType. This ensures the Web Server knows how to display your binary response. Using a stream response makes it possible to return any of data. Streamed data can be pretty handy to return bitmap data from a method. The following is a method that returns a stock history graph for a particular stock over a provided number of years: [CallbackMethod(ContentType="image/png",RouteUrl="stocks/history/graph/{symbol}/{years}")] public Stream GetStockHistoryGraph(string symbol, int years = 2,int width = 500, int height=350) { if (width == 0) width = 500; if (height == 0) height = 350; StockServer server = new StockServer(); return server.GetStockHistoryGraph(symbol,"Stock History for " + symbol,width,height,years); } I can now hook this up into the JavaScript code when I get a stock quote. At the end of the process I can assign the URL to the service that returns the image into the src property and so force the image to display. Here's the changed code: $("#btnStockQuote").click(function () { var symbol = $("#txtSymbol").val(); ajaxCallMethod("SampleService.ashx", "GetStockQuote", [symbol], function (quote) { $("#divStockDisplay").fadeIn(1000); $("#stockCompany").text(quote.Company + " (" + quote.Symbol + ")"); $("#stockLastPrice").text(quote.LastPrice); $("#stockQuoteTime").text(quote.LastQuoteTime.formatDate("MMM dd, hh:mmt")); // display a stock chart $("#imgStockHistory").attr("src", "stocks/history/graph/" + symbol + "/2"); },onPageError); }); The resulting output then looks like this: The charting code uses the new ASP.NET 4.0 Chart components via code to display a bar chart of the 2 year stock data as part of the StockServer class which you can find in the sample download. The ability to return arbitrary data from a service is useful as you can see - in this case the chart is clearly associated with the service and it's nice that the graph generation can happen off a handler rather than through a page. Images are common resources, but output can also be PDF reports, zip files for downloads etc. which is becoming increasingly more common to be returned from REST endpoints and other applications. Why reinvent? Obviously the examples I've shown here are pretty basic in terms of functionality. But I hope they demonstrate the core features of AJAX callbacks that you need to work through in most applications which is simple: return data, send back data and potentially retrieve data in various formats. While there are other solutions when it comes down to making AJAX callbacks and servicing REST like requests, I like the flexibility my home grown solution provides. Simply put it's still the easiest solution that I've found that addresses my common use cases: AJAX JSON RPC style callbacks Url based access XML and JSON Output from single method endpoint XML and JSON POST support, querystring input, routing parameter mapping UrlEncoded POST data support on callbacks Ability to return stream/raw string data Essentially ability to return ANYTHING from Service and pass anything All these features are available in various solutions but not together in one place. I've been using this code base for over 4 years now in a number of projects both for myself and commercial work and it's served me extremely well. Besides the AJAX functionality CallbackHandler provides, it's also an easy way to create any kind of output endpoint I need to create. Need to create a few simple routines that spit back some data, but don't want to create a Page or View or full blown handler for it? Create a CallbackHandler and add a method or multiple methods and you have your generic endpoints. It's a quick and easy way to add small code pieces that are pretty efficient as they're running through a pretty small handler implementation. I can have this up and running in a couple of minutes literally without any setup and returning just about any kind of data. Resources Download the Sample NuGet: Westwind Web and AJAX Utilities (Westwind.Web) ajaxCallMethod() Documentation Using the AjaxMethodCallback WebForms Control West Wind Web Toolkit Home Page West Wind Web Toolkit Source Code © Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET jQuery AJAX Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

A way of doing real-world test-driven development (and some thoughts about it)

- by Thomas Weller

Lately, I exchanged some arguments with Derick Bailey about some details of the red-green-refactor cycle of the Test-driven development process. In short, the issue revolved around the fact that it’s not enough to have a test red or green, but it’s also important to have it red or green for the right reasons. While for me, it’s sufficient to initially have a NotImplementedException in place, Derick argues that this is not totally correct (see these two posts: Red/Green/Refactor, For The Right Reasons and Red For The Right Reason: Fail By Assertion, Not By Anything Else). And he’s right. But on the other hand, I had no idea how his insights could have any practical consequence for my own individual interpretation of the red-green-refactor cycle (which is not really red-green-refactor, at least not in its pure sense, see the rest of this article). This made me think deeply for some days now. In the end I found out that the ‘right reason’ changes in my understanding depending on what development phase I’m in. To make this clear (at least I hope it becomes clear…) I started to describe my way of working in some detail, and then something strange happened: The scope of the article slightly shifted from focusing ‘only’ on the ‘right reason’ issue to something more general, which you might describe as something like 'Doing real-world TDD in .NET , with massive use of third-party add-ins’. This is because I feel that there is a more general statement about Test-driven development to make: It’s high time to speak about the ‘How’ of TDD, not always only the ‘Why’. Much has been said about this, and me myself also contributed to that (see here: TDD is not about testing, it's about how we develop software). But always justifying what you do is very unsatisfying in the long run, it is inherently defensive, and it costs time and effort that could be used for better and more important things. And frankly: I’m somewhat sick and tired of repeating time and again that the test-driven way of software development is highly preferable for many reasons - I don’t want to spent my time exclusively on stating the obvious… So, again, let’s say it clearly: TDD is programming, and programming is TDD. Other ways of programming (code-first, sometimes called cowboy-coding) are exceptional and need justification. – I know that there are many people out there who will disagree with this radical statement, and I also know that it’s not a description of the real world but more of a mission statement or something. But nevertheless I’m absolutely sure that in some years this statement will be nothing but a platitude. Side note: Some parts of this post read as if I were paid by Jetbrains (the manufacturer of the ReSharper add-in – R#), but I swear I’m not. Rather I think that Visual Studio is just not production-complete without it, and I wouldn’t even consider to do professional work without having this add-in installed... The three parts of a software component Before I go into some details, I first should describe my understanding of what belongs to a software component (assembly, type, or method) during the production process (i.e. the coding phase). Roughly, I come up with the three parts shown below: First, we need to have some initial sort of requirement. This can be a multi-page formal document, a vague idea in some programmer’s brain of what might be needed, or anything in between. In either way, there has to be some sort of requirement, be it explicit or not. – At the C# micro-level, the best way that I found to formulate that is to define interfaces for just about everything, even for internal classes, and to provide them with exhaustive xml comments. The next step then is to re-formulate these requirements in an executable form. This is specific to the respective programming language. - For C#/.NET, the Gallio framework (which includes MbUnit) in conjunction with the ReSharper add-in for Visual Studio is my toolset of choice. The third part then finally is the production code itself. It’s development is entirely driven by the requirements and their executable formulation. This is the delivery, the two other parts are ‘only’ there to make its production possible, to give it a decent quality and reliability, and to significantly reduce related costs down the maintenance timeline. So while the first two parts are not really relevant for the customer, they are very important for the developer. The customer (or in Scrum terms: the Product Owner) is not interested at all in how the product is developed, he is only interested in the fact that it is developed as cost-effective as possible, and that it meets his functional and non-functional requirements. The rest is solely a matter of the developer’s craftsmanship, and this is what I want to talk about during the remainder of this article… An example To demonstrate my way of doing real-world TDD, I decided to show the development of a (very) simple Calculator component. The example is deliberately trivial and silly, as examples always are. I am totally aware of the fact that real life is never that simple, but I only want to show some development principles here… The requirement As already said above, I start with writing down some words on the initial requirement, and I normally use interfaces for that, even for internal classes - the typical question “intf or not” doesn’t even come to mind. I need them for my usual workflow and using them automatically produces high componentized and testable code anyway. To think about their usage in every single situation would slow down the production process unnecessarily. So this is what I begin with: namespace Calculator { /// <summary> /// Defines a very simple calculator component for demo purposes. /// </summary> public interface ICalculator { /// <summary> /// Gets the result of the last successful operation. /// </summary> /// <value>The last result.</value> /// <remarks> /// Will be <see langword="null" /> before the first successful operation. /// </remarks> double? LastResult { get; } } // interface ICalculator } // namespace Calculator So, I’m not beginning with a test, but with a sort of code declaration - and still I insist on being 100% test-driven. There are three important things here: Starting this way gives me a method signature, which allows to use IntelliSense and AutoCompletion and thus eliminates the danger of typos - one of the most regular, annoying, time-consuming, and therefore expensive sources of error in the development process. In my understanding, the interface definition as a whole is more of a readable requirement document and technical documentation than anything else. So this is at least as much about documentation than about coding. The documentation must completely describe the behavior of the documented element. I normally use an IoC container or some sort of self-written provider-like model in my architecture. In either case, I need my components defined via service interfaces anyway. - I will use the LinFu IoC framework here, for no other reason as that is is very simple to use. The ‘Red’ (pt. 1) First I create a folder for the project’s third-party libraries and put the LinFu.Core dll there. Then I set up a test project (via a Gallio project template), and add references to the Calculator project and the LinFu dll. Finally I’m ready to write the first test, which will look like the following: namespace Calculator.Test { [TestFixture] public class CalculatorTest { private readonly ServiceContainer container = new ServiceContainer(); [Test] public void CalculatorLastResultIsInitiallyNull() { ICalculator calculator = container.GetService<ICalculator>(); Assert.IsNull(calculator.LastResult); } } // class CalculatorTest } // namespace Calculator.Test This is basically the executable formulation of what the interface definition states (part of). Side note: There’s one principle of TDD that is just plain wrong in my eyes: I’m talking about the Red is 'does not compile' thing. How could a compiler error ever be interpreted as a valid test outcome? I never understood that, it just makes no sense to me. (Or, in Derick’s terms: this reason is as wrong as a reason ever could be…) A compiler error tells me: Your code is incorrect, but nothing more. Instead, the ‘Red’ part of the red-green-refactor cycle has a clearly defined meaning to me: It means that the test works as intended and fails only if its assumptions are not met for some reason. Back to our Calculator. When I execute the above test with R#, the Gallio plugin will give me this output: So this tells me that the test is red for the wrong reason: There’s no implementation that the IoC-container could load, of course. So let’s fix that. With R#, this is very easy: First, create an ICalculator - derived type: Next, implement the interface members: And finally, move the new class to its own file: So far my ‘work’ was six mouse clicks long, the only thing that’s left to do manually here, is to add the Ioc-specific wiring-declaration and also to make the respective class non-public, which I regularly do to force my components to communicate exclusively via interfaces: This is what my Calculator class looks like as of now: using System; using LinFu.IoC.Configuration; namespace Calculator { [Implements(typeof(ICalculator))] internal class Calculator : ICalculator { public double? LastResult { get { throw new NotImplementedException(); } } } } Back to the test fixture, we have to put our IoC container to work: [TestFixture] public class CalculatorTest { #region Fields private readonly ServiceContainer container = new ServiceContainer(); #endregion // Fields #region Setup/TearDown [FixtureSetUp] public void FixtureSetUp() { container.LoadFrom(AppDomain.CurrentDomain.BaseDirectory, "Calculator.dll"); } ... Because I have a R# live template defined for the setup/teardown method skeleton as well, the only manual coding here again is the IoC-specific stuff: two lines, not more… The ‘Red’ (pt. 2) Now, the execution of the above test gives the following result: This time, the test outcome tells me that the method under test is called. And this is the point, where Derick and I seem to have somewhat different views on the subject: Of course, the test still is worthless regarding the red/green outcome (or: it’s still red for the wrong reasons, in that it gives a false negative). But as far as I am concerned, I’m not really interested in the test outcome at this point of the red-green-refactor cycle. Rather, I only want to assert that my test actually calls the right method. If that’s the case, I will happily go on to the ‘Green’ part… The ‘Green’ Making the test green is quite trivial. Just make LastResult an automatic property: [Implements(typeof(ICalculator))] internal class Calculator : ICalculator { public double? LastResult { get; private set; } } One more round… Now on to something slightly more demanding (cough…). Let’s state that our Calculator exposes an Add() method: ... /// <summary> /// Adds the specified operands. /// </summary> /// <param name="operand1">The operand1.</param> /// <param name="operand2">The operand2.</param> /// <returns>The result of the additon.</returns> /// <exception cref="ArgumentException"> /// Argument <paramref name="operand1"/> is < 0.<br/> /// -- or --<br/> /// Argument <paramref name="operand2"/> is < 0. /// </exception> double Add(double operand1, double operand2); } // interface ICalculator A remark: I sometimes hear the complaint that xml comment stuff like the above is hard to read. That’s certainly true, but irrelevant to me, because I read xml code comments with the CR_Documentor tool window. And using that, it looks like this: Apart from that, I’m heavily using xml code comments (see e.g. here for a detailed guide) because there is the possibility of automating help generation with nightly CI builds (using MS Sandcastle and the Sandcastle Help File Builder), and then publishing the results to some intranet location. This way, a team always has first class, up-to-date technical documentation at hand about the current codebase. (And, also very important for speeding up things and avoiding typos: You have IntelliSense/AutoCompletion and R# support, and the comments are subject to compiler checking…). Back to our Calculator again: Two more R# – clicks implement the Add() skeleton: ... public double Add(double operand1, double operand2) { throw new NotImplementedException(); } } // class Calculator As we have stated in the interface definition (which actually serves as our requirement document!), the operands are not allowed to be negative. So let’s start implementing that. Here’s the test: [Test] [Row(-0.5, 2)] public void AddThrowsOnNegativeOperands(double operand1, double operand2) { ICalculator calculator = container.GetService<ICalculator>(); Assert.Throws<ArgumentException>(() => calculator.Add(operand1, operand2)); } As you can see, I’m using a data-driven unit test method here, mainly for these two reasons: Because I know that I will have to do the same test for the second operand in a few seconds, I save myself from implementing another test method for this purpose. Rather, I only will have to add another Row attribute to the existing one. From the test report below, you can see that the argument values are explicitly printed out. This can be a valuable documentation feature even when everything is green: One can quickly review what values were tested exactly - the complete Gallio HTML-report (as it will be produced by the Continuous Integration runs) shows these values in a quite clear format (see below for an example). Back to our Calculator development again, this is what the test result tells us at the moment: So we’re red again, because there is not yet an implementation… Next we go on and implement the necessary parameter verification to become green again, and then we do the same thing for the second operand. To make a long story short, here’s the test and the method implementation at the end of the second cycle: // in CalculatorTest: [Test] [Row(-0.5, 2)] [Row(295, -123)] public void AddThrowsOnNegativeOperands(double operand1, double operand2) { ICalculator calculator = container.GetService<ICalculator>(); Assert.Throws<ArgumentException>(() => calculator.Add(operand1, operand2)); } // in Calculator: public double Add(double operand1, double operand2) { if (operand1 < 0.0) { throw new ArgumentException("Value must not be negative.", "operand1"); } if (operand2 < 0.0) { throw new ArgumentException("Value must not be negative.", "operand2"); } throw new NotImplementedException(); } So far, we have sheltered our method from unwanted input, and now we can safely operate on the parameters without further caring about their validity (this is my interpretation of the Fail Fast principle, which is regarded here in more detail). Now we can think about the method’s successful outcomes. First let’s write another test for that: [Test] [Row(1, 1, 2)] public void TestAdd(double operand1, double operand2, double expectedResult) { ICalculator calculator = container.GetService<ICalculator>(); double result = calculator.Add(operand1, operand2); Assert.AreEqual(expectedResult, result); } Again, I’m regularly using row based test methods for these kinds of unit tests. The above shown pattern proved to be extremely helpful for my development work, I call it the Defined-Input/Expected-Output test idiom: You define your input arguments together with the expected method result. There are two major benefits from that way of testing: In the course of refining a method, it’s very likely to come up with additional test cases. In our case, we might add tests for some edge cases like ‘one of the operands is zero’ or ‘the sum of the two operands causes an overflow’, or maybe there’s an external test protocol that has to be fulfilled (e.g. an ISO norm for medical software), and this results in the need of testing against additional values. In all these scenarios we only have to add another Row attribute to the test. Remember that the argument values are written to the test report, so as a side-effect this produces valuable documentation. (This can become especially important if the fulfillment of some sort of external requirements has to be proven). So your test method might look something like that in the end: [Test, Description("Arguments: operand1, operand2, expectedResult")] [Row(1, 1, 2)] [Row(0, 999999999, 999999999)] [Row(0, 0, 0)] [Row(0, double.MaxValue, double.MaxValue)] [Row(4, double.MaxValue - 2.5, double.MaxValue)] public void TestAdd(double operand1, double operand2, double expectedResult) { ICalculator calculator = container.GetService<ICalculator>(); double result = calculator.Add(operand1, operand2); Assert.AreEqual(expectedResult, result); } And this will produce the following HTML report (with Gallio): Not bad for the amount of work we invested in it, huh? - There might be scenarios where reports like that can be useful for demonstration purposes during a Scrum sprint review… The last requirement to fulfill is that the LastResult property is expected to store the result of the last operation. I don’t show this here, it’s trivial enough and brings nothing new… And finally: Refactor (for the right reasons) To demonstrate my way of going through the refactoring portion of the red-green-refactor cycle, I added another method to our Calculator component, namely Subtract(). Here’s the code (tests and production): // CalculatorTest.cs: [Test, Description("Arguments: operand1, operand2, expectedResult")] [Row(1, 1, 0)] [Row(0, 999999999, -999999999)] [Row(0, 0, 0)] [Row(0, double.MaxValue, -double.MaxValue)] [Row(4, double.MaxValue - 2.5, -double.MaxValue)] public void TestSubtract(double operand1, double operand2, double expectedResult) { ICalculator calculator = container.GetService<ICalculator>(); double result = calculator.Subtract(operand1, operand2); Assert.AreEqual(expectedResult, result); } [Test, Description("Arguments: operand1, operand2, expectedResult")] [Row(1, 1, 0)] [Row(0, 999999999, -999999999)] [Row(0, 0, 0)] [Row(0, double.MaxValue, -double.MaxValue)] [Row(4, double.MaxValue - 2.5, -double.MaxValue)] public void TestSubtractGivesExpectedLastResult(double operand1, double operand2, double expectedResult) { ICalculator calculator = container.GetService<ICalculator>(); calculator.Subtract(operand1, operand2); Assert.AreEqual(expectedResult, calculator.LastResult); } ... // ICalculator.cs: /// <summary> /// Subtracts the specified operands. /// </summary> /// <param name="operand1">The operand1.</param> /// <param name="operand2">The operand2.</param> /// <returns>The result of the subtraction.</returns> /// <exception cref="ArgumentException"> /// Argument <paramref name="operand1"/> is < 0.<br/> /// -- or --<br/> /// Argument <paramref name="operand2"/> is < 0. /// </exception> double Subtract(double operand1, double operand2); ... // Calculator.cs: public double Subtract(double operand1, double operand2) { if (operand1 < 0.0) { throw new ArgumentException("Value must not be negative.", "operand1"); } if (operand2 < 0.0) { throw new ArgumentException("Value must not be negative.", "operand2"); } return (this.LastResult = operand1 - operand2).Value; } Obviously, the argument validation stuff that was produced during the red-green part of our cycle duplicates the code from the previous Add() method. So, to avoid code duplication and minimize the number of code lines of the production code, we do an Extract Method refactoring. One more time, this is only a matter of a few mouse clicks (and giving the new method a name) with R#: Having done that, our production code finally looks like that: using System; using LinFu.IoC.Configuration; namespace Calculator { [Implements(typeof(ICalculator))] internal class Calculator : ICalculator { #region ICalculator public double? LastResult { get; private set; } public double Add(double operand1, double operand2) { ThrowIfOneOperandIsInvalid(operand1, operand2); return (this.LastResult = operand1 + operand2).Value; } public double Subtract(double operand1, double operand2) { ThrowIfOneOperandIsInvalid(operand1, operand2); return (this.LastResult = operand1 - operand2).Value; } #endregion // ICalculator #region Implementation (Helper) private static void ThrowIfOneOperandIsInvalid(double operand1, double operand2) { if (operand1 < 0.0) { throw new ArgumentException("Value must not be negative.", "operand1"); } if (operand2 < 0.0) { throw new ArgumentException("Value must not be negative.", "operand2"); } } #endregion // Implementation (Helper) } // class Calculator } // namespace Calculator But is the above worth the effort at all? It’s obviously trivial and not very impressive. All our tests were green (for the right reasons), and refactoring the code did not change anything. It’s not immediately clear how this refactoring work adds value to the project. Derick puts it like this: STOP! Hold on a second… before you go any further and before you even think about refactoring what you just wrote to make your test pass, you need to understand something: if your done with your requirements after making the test green, you are not required to refactor the code. I know… I’m speaking heresy, here. Toss me to the wolves, I’ve gone over to the dark side! Seriously, though… if your test is passing for the right reasons, and you do not need to write any test or any more code for you class at this point, what value does refactoring add? Derick immediately answers his own question: So why should you follow the refactor portion of red/green/refactor? When you have added code that makes the system less readable, less understandable, less expressive of the domain or concern’s intentions, less architecturally sound, less DRY, etc, then you should refactor it. I couldn’t state it more precise. From my personal perspective, I’d add the following: You have to keep in mind that real-world software systems are usually quite large and there are dozens or even hundreds of occasions where micro-refactorings like the above can be applied. It’s the sum of them all that counts. And to have a good overall quality of the system (e.g. in terms of the Code Duplication Percentage metric) you have to be pedantic on the individual, seemingly trivial cases. My job regularly requires the reading and understanding of ‘foreign’ code. So code quality/readability really makes a HUGE difference for me – sometimes it can be even the difference between project success and failure… Conclusions The above described development process emerged over the years, and there were mainly two things that guided its evolution (you might call it eternal principles, personal beliefs, or anything in between): Test-driven development is the normal, natural way of writing software, code-first is exceptional. So ‘doing TDD or not’ is not a question. And good, stable code can only reliably be produced by doing TDD (yes, I know: many will strongly disagree here again, but I’ve never seen high-quality code – and high-quality code is code that stood the test of time and causes low maintenance costs – that was produced code-first…) It’s the production code that pays our bills in the end. (Though I have seen customers these days who demand an acceptance test battery as part of the final delivery. Things seem to go into the right direction…). The test code serves ‘only’ to make the production code work. But it’s the number of delivered features which solely counts at the end of the day - no matter how much test code you wrote or how good it is. With these two things in mind, I tried to optimize my coding process for coding speed – or, in business terms: productivity - without sacrificing the principles of TDD (more than I’d do either way…). As a result, I consider a ratio of about 3-5/1 for test code vs. production code as normal and desirable. In other words: roughly 60-80% of my code is test code (This might sound heavy, but that is mainly due to the fact that software development standards only begin to evolve. The entire software development profession is very young, historically seen; only at the very beginning, and there are no viable standards yet. If you think about software development as a kind of casting process, where the test code is the mold and the resulting production code is the final product, then the above ratio sounds no longer extraordinary…) Although the above might look like very much unnecessary work at first sight, it’s not. With the aid of the mentioned add-ins, doing all the above is a matter of minutes, sometimes seconds (while writing this post took hours and days…). The most important thing is to have the right tools at hand. Slow developer machines or the lack of a tool or something like that - for ‘saving’ a few 100 bucks - is just not acceptable and a very bad decision in business terms (though I quite some times have seen and heard that…). Production of high-quality products needs the usage of high-quality tools. This is a platitude that every craftsman knows… The here described round-trip will take me about five to ten minutes in my real-world development practice. I guess it’s about 30% more time compared to developing the ‘traditional’ (code-first) way. But the so manufactured ‘product’ is of much higher quality and massively reduces maintenance costs, which is by far the single biggest cost factor, as I showed in this previous post: It's the maintenance, stupid! (or: Something is rotten in developerland.). In the end, this is a highly cost-effective way of software development… But on the other hand, there clearly is a trade-off here: coding speed vs. code quality/later maintenance costs. The here described development method might be a perfect fit for the overwhelming majority of software projects, but there certainly are some scenarios where it’s not - e.g. if time-to-market is crucial for a software project. So this is a business decision in the end. It’s just that you have to know what you’re doing and what consequences this might have… Some last words First, I’d like to thank Derick Bailey again. His two aforementioned posts (which I strongly recommend for reading) inspired me to think deeply about my own personal way of doing TDD and to clarify my thoughts about it. I wouldn’t have done that without this inspiration. I really enjoy that kind of discussions… I agree with him in all respects. But I don’t know (yet?) how to bring his insights into the described production process without slowing things down. The above described method proved to be very “good enough” in my practical experience. But of course, I’m open to suggestions here… My rationale for now is: If the test is initially red during the red-green-refactor cycle, the ‘right reason’ is: it actually calls the right method, but this method is not yet operational. Later on, when the cycle is finished and the tests become part of the regular, automated Continuous Integration process, ‘red’ certainly must occur for the ‘right reason’: in this phase, ‘red’ MUST mean nothing but an unfulfilled assertion - Fail By Assertion, Not By Anything Else!

Read the article

AngularJS on top of ASP.NET: Moving the MVC framework out to the browser

- by Varun Chatterji

Heavily drawing inspiration from Ruby on Rails, MVC4’s convention over configuration model of development soon became the Holy Grail of .NET web development. The MVC model brought with it the goodness of proper separation of concerns between business logic, data, and the presentation logic. However, the MVC paradigm, was still one in which server side .NET code could be mixed with presentation code. The Razor templating engine, though cleaner than its predecessors, still encouraged and allowed you to mix .NET server side code with presentation logic. Thus, for example, if the developer required a certain <div> tag to be shown if a particular variable ShowDiv was true in the View’s model, the code could look like the following: Fig 1: To show a div or not. Server side .NET code is used in the View Mixing .NET code with HTML in views can soon get very messy. Wouldn’t it be nice if the presentation layer (HTML) could be pure HTML? Also, in the ASP.NET MVC model, some of the business logic invariably resides in the controller. It is tempting to use an antipattern like the one shown above to control whether a div should be shown or not. However, best practice would indicate that the Controller should not be aware of the div. The ShowDiv variable in the model should not exist. A controller should ideally, only be used to do the plumbing of getting the data populated in the model and nothing else. The view (ideally pure HTML) should render the presentation layer based on the model. In this article we will see how Angular JS, a new JavaScript framework by Google can be used effectively to build web applications where: 1. Views are pure HTML 2. Controllers (in the server sense) are pure REST based API calls 3. The presentation layer is loaded as needed from partial HTML only files. What is MVVM? MVVM short for Model View View Model is a new paradigm in web development. In this paradigm, the Model and View stuff exists on the client side through javascript instead of being processed on the server through postbacks. These frameworks are JavaScript frameworks that facilitate the clear separation of the “frontend” or the data rendering logic from the “backend” which is typically just a REST based API that loads and processes data through a resource model. The frameworks are called MVVM as a change to the Model (through javascript) gets reflected in the view immediately i.e. Model > View. Also, a change on the view (through manual input) gets reflected in the model immediately i.e. View > Model. The following figure shows this conceptually (comments are shown in red): Fig 2: Demonstration of MVVM in action In Fig 2, two text boxes are bound to the same variable model.myInt. Thus, changing the view manually (changing one text box through keyboard input) also changes the other textbox in real time demonstrating V > M property of a MVVM framework. Furthermore, clicking the button adds 1 to the value of model.myInt thus changing the model through JavaScript. This immediately updates the view (the value in the two textboxes) thus demonstrating the M > V property of a MVVM framework. Thus we see that the model in a MVVM JavaScript framework can be regarded as “the single source of truth“. This is an important concept. Angular is one such MVVM framework. We shall use it to build a simple app that sends SMS messages to a particular number. Application, Routes, Views, Controllers, Scope and Models Angular can be used in many ways to construct web applications. For this article, we shall only focus on building Single Page Applications (SPAs). Many of the approaches we will follow in this article have alternatives. It is beyond the scope of this article to explain every nuance in detail but we shall try to touch upon the basic concepts and end up with a working application that can be used to send SMS messages using Sent.ly Plus (a service that is itself built using Angular). Before you read on, we would like to urge you to forget what you know about Models, Views, Controllers and Routes in the ASP.NET MVC4 framework. All these words have different meanings in the Angular world. Whenever these words are used in this article, they will refer to Angular concepts and not ASP.NET MVC4 concepts. The following figure shows the skeleton of the root page of an SPA: Fig 3: The skeleton of a SPA The skeleton of the application is based on the Bootstrap starter template which can be found at: http://getbootstrap.com/examples/startertemplate/ Apart from loading the Angular, jQuery and Bootstrap JavaScript libraries, it also loads our custom scripts /app/js/controllers.js /app/js/app.js These scripts define the routes, views and controllers which we shall come to in a moment. Application Notice that the body tag (Fig. 3) has an extra attribute: ngapp=”smsApp” Providing this tag “bootstraps” our single page application. It tells Angular to load a “module” called smsApp. This “module” is defined /app/js/app.js angular.module('smsApp', ['smsApp.controllers', function () {}]) Fig 4: The definition of our application module The line shows above, declares a module called smsApp. It also declares that this module “depends” on another module called “smsApp.controllers”. The smsApp.controllers module will contain all the controllers for our SPA. Routing and Views Notice that in the Navbar (in Fig 3) we have included two hyperlinks to: “#/app” “#/help” This is how Angular handles routing. Since the URLs start with “#”, they are actually just bookmarks (and not server side resources). However, our route definition (in /app/js/app.js) gives these URLs a special meaning within the Angular framework. angular.module('smsApp', ['smsApp.controllers', function () { }]) //Configure the routes .config(['$routeProvider', function ($routeProvider) { $routeProvider.when('/binding', { templateUrl: '/app/partials/bindingexample.html', controller: 'BindingController' }); }]); Fig 5: The definition of a route with an associated partial view and controller As we can see from the previous code sample, we are using the $routeProvider object in the configuration of our smsApp module. Notice how the code “asks for” the $routeProvider object by specifying it as a dependency in the [] braces and then defining a function that accepts it as a parameter. This is known as dependency injection. Please refer to the following link if you want to delve into this topic: http://docs.angularjs.org/guide/di What the above code snippet is doing is that it is telling Angular that when the URL is “#/binding”, then it should load the HTML snippet (“partial view”) found at /app/partials/bindingexample.html. Also, for this URL, Angular should load the controller called “BindingController”. We have also marked the div with the class “container” (in Fig 3) with the ngview attribute. This attribute tells Angular that views (partial HTML pages) defined in the routes will be loaded within this div. You can see that the Angular JavaScript framework, unlike many other frameworks, works purely by extending HTML tags and attributes. It also allows you to extend HTML with your own tags and attributes (through directives) if you so desire, you can find out more about directives at the following URL: http://www.codeproject.com/Articles/607873/ExtendingHTMLwithAngularJSDirectives Controllers and Models We have seen how we define what views and controllers should be loaded for a particular route. Let us now consider how controllers are defined. Our controllers are defined in the file /app/js/controllers.js. The following snippet shows the definition of the “BindingController” which is loaded when we hit the URL http://localhost:port/index.html#/binding (as we have defined in the route earlier as shown in Fig 5). Remember that we had defined that our application module “smsApp” depends on the “smsApp.controllers” module (see Fig 4). The code snippet below shows how the “BindingController” defined in the route shown in Fig 5 is defined in the module smsApp.controllers: angular.module('smsApp.controllers', [function () { }]) .controller('BindingController', ['$scope', function ($scope) { $scope.model = {}; $scope.model.myInt = 6; $scope.addOne = function () { $scope.model.myInt++; } }]); Fig 6: The definition of a controller in the “smsApp.controllers” module. The pieces are falling in place! Remember Fig.2? That was the code of a partial view that was loaded within the container div of the skeleton SPA shown in Fig 3. The route definition shown in Fig 5 also defined that the controller called “BindingController” (shown in Fig 6.) was loaded when we loaded the URL: http://localhost:22544/index.html#/binding The button in Fig 2 was marked with the attribute ngclick=”addOne()” which added 1 to the value of model.myInt. In Fig 6, we can see that this function is actually defined in the “BindingController”. Scope We can see from Fig 6, that in the definition of “BindingController”, we defined a dependency on $scope and then, as usual, defined a function which “asks for” $scope as per the dependency injection pattern. So what is $scope? Any guesses? As you might have guessed a scope is a particular “address space” where variables and functions may be defined. This has a similar meaning to scope in a programming language like C#. Model: The Scope is not the Model It is tempting to assign variables in the scope directly. For example, we could have defined myInt as $scope.myInt = 6 in Fig 6 instead of $scope.model.myInt = 6. The reason why this is a bad idea is that scope in hierarchical in Angular. Thus if we were to define a controller which was defined within the another controller (nested controllers), then the inner controller would inherit the scope of the parent controller. This inheritance would follow JavaScript prototypal inheritance. Let’s say the parent controller defined a variable through $scope.myInt = 6. The child controller would inherit the scope through java prototypical inheritance. This basically means that the child scope has a variable myInt that points to the parent scopes myInt variable. Now if we assigned the value of myInt in the parent, the child scope would be updated with the same value as the child scope’s myInt variable points to the parent scope’s myInt variable. However, if we were to assign the value of the myInt variable in the child scope, then the link of that variable to the parent scope would be broken as the variable myInt in the child scope now points to the value 6 and not to the parent scope’s myInt variable. But, if we defined a variable model in the parent scope, then the child scope will also have a variable model that points to the model variable in the parent scope. Updating the value of $scope.model.myInt in the parent scope would change the model variable in the child scope too as the variable is pointed to the model variable in the parent scope. Now changing the value of $scope.model.myInt in the child scope would ALSO change the value in the parent scope. This is because the model reference in the child scope is pointed to the scope variable in the parent. We did no new assignment to the model variable in the child scope. We only changed an attribute of the model variable. Since the model variable (in the child scope) points to the model variable in the parent scope, we have successfully changed the value of myInt in the parent scope. Thus the value of $scope.model.myInt in the parent scope becomes the “single source of truth“. This is a tricky concept, thus it is considered good practice to NOT use scope inheritance. More info on prototypal inheritance in Angular can be found in the “JavaScript Prototypal Inheritance” section at the following URL: https://github.com/angular/angular.js/wiki/UnderstandingScopes. Building It: An Angular JS application using a .NET Web API Backend Now that we have a perspective on the basic components of an MVVM application built using Angular, let’s build something useful. We will build an application that can be used to send out SMS messages to a given phone number. The following diagram describes the architecture of the application we are going to build: Fig 7: Broad application architecture We are going to add an HTML Partial to our project. This partial will contain the form fields that will accept the phone number and message that needs to be sent as an SMS. It will also display all the messages that have previously been sent. All the executable code that is run on the occurrence of events (button clicks etc.) in the view resides in the controller. The controller interacts with the ASP.NET WebAPI to get a history of SMS messages, add a message etc. through a REST based API. For the purposes of simplicity, we will use an in memory data structure for the purposes of creating this application. Thus, the tasks ahead of us are: Creating the REST WebApi with GET, PUT, POST, DELETE methods. Creating the SmsView.html partial Creating the SmsController controller with methods that are called from the SmsView.html partial Add a new route that loads the controller and the partial. 1. Creating the REST WebAPI This is a simple task that should be quite straightforward to any .NET developer. The following listing shows our ApiController: public class SmsMessage { public string to { get; set; } public string message { get; set; } } public class SmsResource : SmsMessage { public int smsId { get; set; } } public class SmsResourceController : ApiController { public static Dictionary<int, SmsResource> messages = new Dictionary<int, SmsResource>(); public static int currentId = 0; // GET api/<controller> public List<SmsResource> Get() { List<SmsResource> result = new List<SmsResource>(); foreach (int key in messages.Keys) { result.Add(messages[key]); } return result; } // GET api/<controller>/5 public SmsResource Get(int id) { if (messages.ContainsKey(id)) return messages[id]; return null; } // POST api/<controller> public List<SmsResource> Post([FromBody] SmsMessage value) { //Synchronize on messages so we don't have id collisions lock (messages) { SmsResource res = (SmsResource) value; res.smsId = currentId++; messages.Add(res.smsId, res); //SentlyPlusSmsSender.SendMessage(value.to, value.message); return Get(); } } // PUT api/<controller>/5 public List<SmsResource> Put(int id, [FromBody] SmsMessage value) { //Synchronize on messages so we don't have id collisions lock (messages) { if (messages.ContainsKey(id)) { //Update the message messages[id].message = value.message; messages[id].to = value.message; } return Get(); } } // DELETE api/<controller>/5 public List<SmsResource> Delete(int id) { if (messages.ContainsKey(id)) { messages.Remove(id); } return Get(); } } Once this class is defined, we should be able to access the WebAPI by a simple GET request using the browser: http://localhost:port/api/SmsResource Notice the commented line: //SentlyPlusSmsSender.SendMessage The SentlyPlusSmsSender class is defined in the attached solution. We have shown this line as commented as we want to explain the core Angular concepts. If you load the attached solution, this line is uncommented in the source and an actual SMS will be sent! By default, the API returns XML. For consumption of the API in Angular, we would like it to return JSON. To change the default to JSON, we make the following change to WebApiConfig.cs file located in the App_Start folder. public static class WebApiConfig { public static void Register(HttpConfiguration config) { config.Routes.MapHttpRoute( name: "DefaultApi", routeTemplate: "api/{controller}/{id}", defaults: new { id = RouteParameter.Optional } ); var appXmlType = config.Formatters.XmlFormatter. SupportedMediaTypes. FirstOrDefault( t => t.MediaType == "application/xml"); config.Formatters.XmlFormatter.SupportedMediaTypes.Remove(appXmlType); } } We now have our backend REST Api which we can consume from Angular! 2. Creating the SmsView.html partial This simple partial will define two fields: the destination phone number (international format starting with a +) and the message. These fields will be bound to model.phoneNumber and model.message. We will also add a button that we shall hook up to sendMessage() in the controller. A list of all previously sent messages (bound to model.allMessages) will also be displayed below the form input. The following code shows the code for the partial:  <div class="well" style="margin-top: 30px;"> <table style="width: 100%;"> <tr> <td style="width: 45%; text-align: center;"> <input type="text" placeholder="Phone number (eg; +44 7778 609466)" ng-model="model.phoneNumber" class="form-control" style="width: 90%" onkeypress="return checkPhoneInput();" /> </td> <td style="width: 45%; text-align: center;"> <input type="text" placeholder="Message" ng-model="model.message" class="form-control" style="width: 90%" /> </td> <td style="text-align: center;"> <button class="btn btn-danger" ng-click="sendMessage();" ng-disabled="model.isAjaxInProgress" style="marginright: 5px;">Send</button> <img src="/Content/ajax-loader.gif" ng-show="model.isAjaxInProgress" /> </td> </tr> </table> </div>  <div style="margin-top: 30px;">  <div ng-show="model.allMessages.length == 0"> No messages have been sent yet! </div>  <div ng-show="model.allMessages.length == 0"> <table style="width: 100%;" class="table table-striped"> <tr> <td>Phone Number</td> <td>Message</td> <td></td> </tr>  <tr ng-repeat="message in model.allMessages"> <td>{{ message.to }}</td> <td>{{ message.message }}</td> <td> <button class="btn btn-danger" ng-click="delete(message.smsId);" ng-disabled="model.isAjaxInProgress">Delete</button> </td> </tr> </table> </div> </div> The above code is commented and should be self explanatory. Conditional rendering is achieved through using the ng-show=”condition” attribute on various div tags. Input fields are bound to the model and the send button is bound to the sendMessage() function in the controller as through the ngclick=”sendMessage()” attribute defined on the button tag. While AJAX calls are taking place, the controller sets model.isAjaxInProgress to true. Based on this variable, buttons are disabled through the ng-disabled directive which is added as an attribute to the buttons. The ng-repeat directive added as an attribute to the tr tag causes the table row to be rendered multiple times much like an ASP.NET repeater. 3. Creating the SmsController controller The penultimate piece of our application is the controller which responds to events from our view and interacts with our MVC4 REST WebAPI. The following listing shows the code we need to add to /app/js/controllers.js. Note that controller definitions can be chained. Also note that this controller “asks for” the $http service. The $http service is a simple way in Angular to do AJAX. So far we have only encountered modules, controllers, views and directives in Angular. The $http is new entity in Angular called a service. More information on Angular services can be found at the following URL: http://docs.angularjs.org/guide/dev_guide.services.understanding_services. .controller('SmsController', ['$scope', '$http', function ($scope, $http) { //We define the model $scope.model = {}; //We define the allMessages array in the model //that will contain all the messages sent so far $scope.model.allMessages = []; //The error if any $scope.model.errorMessage = undefined; //We initially load data so set the isAjaxInProgress = true; $scope.model.isAjaxInProgress = true; //Load all the messages $http({ url: '/api/smsresource', method: "GET" }). success(function (data, status, headers, config) { this callback will be called asynchronously //when the response is available $scope.model.allMessages = data; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }). error(function (data, status, headers, config) { //called asynchronously if an error occurs //or server returns response with an error status. $scope.model.errorMessage = "Error occurred status:" + status; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); $scope.delete = function (id) { //We are making an ajax call so we set this to true $scope.model.isAjaxInProgress = true; $http({ url: '/api/smsresource/' + id, method: "DELETE" }). success(function (data, status, headers, config) { // this callback will be called asynchronously // when the response is available $scope.model.allMessages = data; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); error(function (data, status, headers, config) { // called asynchronously if an error occurs // or server returns response with an error status. $scope.model.errorMessage = "Error occurred status:" + status; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); } $scope.sendMessage = function () { $scope.model.errorMessage = undefined; var message = ''; if($scope.model.message != undefined) message = $scope.model.message.trim(); if ($scope.model.phoneNumber == undefined || $scope.model.phoneNumber == '' || $scope.model.phoneNumber.length < 10 || $scope.model.phoneNumber[0] != '+') { $scope.model.errorMessage = "You must enter a valid phone number in international format. Eg: +44 7778 609466"; return; } if (message.length == 0) { $scope.model.errorMessage = "You must specify a message!"; return; } //We are making an ajax call so we set this to true $scope.model.isAjaxInProgress = true; $http({ url: '/api/smsresource', method: "POST", data: { to: $scope.model.phoneNumber, message: $scope.model.message } }). success(function (data, status, headers, config) { // this callback will be called asynchronously // when the response is available $scope.model.allMessages = data; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }). error(function (data, status, headers, config) { // called asynchronously if an error occurs // or server returns response with an error status. $scope.model.errorMessage = "Error occurred status:" + status // We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); } }]); We can see from the previous listing how the functions that are called from the view are defined in the controller. It should also be evident how easy it is to make AJAX calls to consume our MVC4 REST WebAPI. Now we are left with the final piece. We need to define a route that associates a particular path with the view we have defined and the controller we have defined. 4. Add a new route that loads the controller and the partial This is the easiest part of the puzzle. We simply define another route in the /app/js/app.js file: $routeProvider.when('/sms', { templateUrl: '/app/partials/smsview.html', controller: 'SmsController' }); Conclusion In this article we have seen how much of the server side functionality in the MVC4 framework can be moved to the browser thus delivering a snappy and fast user interface. We have seen how we can build client side HTML only views that avoid the messy syntax offered by server side Razor views. We have built a functioning app from the ground up. The significant advantage of this approach to building web apps is that the front end can be completely platform independent. Even though we used ASP.NET to create our REST API, we could just easily have used any other language such as Node.js, Ruby etc without changing a single line of our front end code. Angular is a rich framework and we have only touched on basic functionality required to create a SPA. For readers who wish to delve further into the Angular framework, we would recommend the following URL as a starting point: http://docs.angularjs.org/misc/started. To get started with the code for this project: Sign up for an account at http://plus.sent.ly (free) Add your phone number Go to the “My Identies Page” Note Down your Sender ID, Consumer Key and Consumer Secret Download the code for this article at: https://docs.google.com/file/d/0BzjEWqSE31yoZjZlV0d0R2Y3eW8/edit?usp=sharing Change the values of Sender Id, Consumer Key and Consumer Secret in the web.config file Run the project through Visual Studio!

Read the article

MySQL Syslog Audit Plugin

- by jonathonc

This post shows the construction process of the Syslog Audit plugin that was presented at MySQL Connect 2012. It is based on an environment that has the appropriate development tools enabled including gcc,g++ and cmake. It also assumes you have downloaded the MySQL source code (5.5.16 or higher) and have compiled and installed the system into the /usr/local/mysql directory ready for use. The information provided below is designed to show the different components that make up a plugin, and specifically an audit type plugin, and how it comes together to be used within the MySQL service. The MySQL Reference Manual contains information regarding the plugin API and how it can be used, so please refer there for more detailed information. The code in this post is designed to give the simplest information necessary, so handling every return code, managing race conditions etc is not part of this example code. Let's start by looking at the most basic implementation of our plugin code as seen below: /* Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved. Author: Jonathon Coombes Licence: GPL Description: An auditing plugin that logs to syslog and can adjust the loglevel via the system variables. */ #include <stdio.h> #include <string.h> #include <mysql/plugin_audit.h> #include <syslog.h> There is a commented header detailing copyright/licencing and meta-data information and then the include headers. The two important include statements for our plugin are the syslog.h plugin, which gives us the structures for syslog, and the plugin_audit.h include which has details regarding the audit specific plugin api. Note that we do not need to include the general plugin header plugin.h, as this is done within the plugin_audit.h file already. To implement our plugin within the current implementation we need to add it into our source code and compile. > cd /usr/local/src/mysql-5.5.28/plugin > mkdir audit_syslog > cd audit_syslog A simple CMakeLists.txt file is created to manage the plugin compilation: MYSQL_ADD_PLUGIN(audit_syslog audit_syslog.cc MODULE_ONLY) Run the cmake command at the top level of the source and then you can compile the plugin using the 'make' command. This results in a compiled audit_syslog.so library, but currently it is not much use to MySQL as there is no level of api defined to communicate with the MySQL service. Now we need to define the general plugin structure that enables MySQL to recognise the library as a plugin and be able to install/uninstall it and have it show up in the system. The structure is defined in the plugin.h file in the MySQL source code. /* Plugin library descriptor */ mysql_declare_plugin(audit_syslog) { MYSQL_AUDIT_PLUGIN, /* plugin type */ &audit_syslog_descriptor, /* descriptor handle */ "audit_syslog", /* plugin name */ "Author Name", /* author */ "Simple Syslog Audit", /* description */ PLUGIN_LICENSE_GPL, /* licence */ audit_syslog_init, /* init function */ audit_syslog_deinit, /* deinit function */ 0x0001, /* plugin version */ NULL, /* status variables */ NULL, /* system variables */ NULL, /* no reserves */ 0, /* no flags */ } mysql_declare_plugin_end; The general plugin descriptor above is standard for all plugin types in MySQL. The plugin type is defined along with the init/deinit functions and interface methods into the system for sharing information, and various other metadata information. The descriptors have an internally recognised version number so that plugins can be matched against the api on the running server. The other details are usually related to the type-specific methods and structures to implement the plugin. Each plugin has a type-specific descriptor as well which details how the plugin is implemented for the specific purpose of that plugin type. /* Plugin type-specific descriptor */ static struct st_mysql_audit audit_syslog_descriptor= { MYSQL_AUDIT_INTERFACE_VERSION, /* interface version */ NULL, /* release_thd function */ audit_syslog_notify, /* notify function */ { (unsigned long) MYSQL_AUDIT_GENERAL_CLASSMASK | MYSQL_AUDIT_CONNECTION_CLASSMASK } /* class mask */ }; In this particular case, the release_thd function has not been defined as it is not required. The important method for auditing is the notify function which is activated when an event occurs on the system. The notify function is designed to activate on an event and the implementation will determine how it is handled. For the audit_syslog plugin, the use of the syslog feature sends all events to the syslog for recording. The class mask allows us to determine what type of events are being seen by the notify function. There are currently two major types of event: 1. General Events: This includes general logging, errors, status and result type events. This is the main one for tracking the queries and operations on the database. 2. Connection Events: This group is based around user logins. It monitors connections and disconnections, but also if somebody changes user while connected. With most audit plugins, the principle behind the plugin is to track changes to the system over time and counters can be an important part of this process. The next step is to define and initialise the counters that are used to track the events in the service. There are 3 counters defined in total for our plugin - the # of general events, the # of connection events and the total number of events. static volatile int total_number_of_calls; /* Count MYSQL_AUDIT_GENERAL_CLASS event instances */ static volatile int number_of_calls_general; /* Count MYSQL_AUDIT_CONNECTION_CLASS event instances */ static volatile int number_of_calls_connection; The init and deinit functions for the plugin are there to be called when the plugin is activated and when it is terminated. These offer the best option to initialise the counters for our plugin: /* Initialize the plugin at server start or plugin installation. */ static int audit_syslog_init(void *arg __attribute__((unused))) { openlog("mysql_audit:",LOG_PID|LOG_PERROR|LOG_CONS,LOG_USER); total_number_of_calls= 0; number_of_calls_general= 0; number_of_calls_connection= 0; return(0); } The init function does a call to openlog to initialise the syslog functionality. The parameters are the service to log under ("mysql_audit" in this case), the syslog flags and the facility for the logging. Then each of the counters are initialised to zero and a success is returned. If the init function is not defined, it will return success by default. /* Terminate the plugin at server shutdown or plugin deinstallation. */ static int audit_syslog_deinit(void *arg __attribute__((unused))) { closelog(); return(0); } The deinit function will simply close our syslog connection and return success. Note that the syslog functionality is part of the glibc libraries and does not require any external factors. The function names are what we define in the general plugin structure, so these have to match otherwise there will be errors. The next step is to implement the event notifier function that was defined in the type specific descriptor (audit_syslog_descriptor) which is audit_syslog_notify. /* Event notifier function */ static void audit_syslog_notify(MYSQL_THD thd __attribute__((unused)), unsigned int event_class, const void *event) { total_number_of_calls++; if (event_class == MYSQL_AUDIT_GENERAL_CLASS) { const struct mysql_event_general *event_general= (const struct mysql_event_general *) event; number_of_calls_general++; syslog(audit_loglevel,"%lu: User: %s Command: %s Query: %s\n", event_general->general_thread_id, event_general->general_user, event_general->general_command, event_general->general_query ); } else if (event_class == MYSQL_AUDIT_CONNECTION_CLASS) { const struct mysql_event_connection *event_connection= (const struct mysql_event_connection *) event; number_of_calls_connection++; syslog(audit_loglevel,"%lu: User: %s@%s[%s] Event: %d Status: %d\n", event_connection->thread_id, event_connection->user, event_connection->host, event_connection->ip, event_connection->event_subclass, event_connection->status ); } } In the case of an event, the notifier function is called. The first step is to increment the total number of events that have occurred in our database.The event argument is then cast into the appropriate event structure depending on the class type, of general event or connection event. The event type counters are incremented and details are sent via the syslog() function out to the system log. There are going to be different line formats and information returned since the general events have different data compared to the connection events, even though some of the details overlap, for example, user, thread id, host etc. On compiling the code now, there should be no errors and the resulting audit_syslog.so can be loaded into the server and ready to use. Log into the server and type: mysql> INSTALL PLUGIN audit_syslog SONAME 'audit_syslog.so'; This will install the plugin and will start updating the syslog immediately. Note that the audit plugin attaches to the immediate thread and cannot be uninstalled while that thread is active. This means that you cannot run the UNISTALL command until you log into a different connection (thread) on the server. Once the plugin is loaded, the system log will show output such as the following: Oct 8 15:33:21 machine mysql_audit:[8337]: 87: User: root[root] @ localhost [] Command: (null) Query: INSTALL PLUGIN audit_syslog SONAME 'audit_syslog.so' Oct 8 15:33:21 machine mysql_audit:[8337]: 87: User: root[root] @ localhost [] Command: Query Query: INSTALL PLUGIN audit_syslog SONAME 'audit_syslog.so' Oct 8 15:33:40 machine mysql_audit:[8337]: 87: User: root[root] @ localhost [] Command: (null) Query: show tables Oct 8 15:33:40 machine mysql_audit:[8337]: 87: User: root[root] @ localhost [] Command: Query Query: show tables Oct 8 15:33:43 machine mysql_audit:[8337]: 87: User: root[root] @ localhost [] Command: (null) Query: select * from t1 Oct 8 15:33:43 machine mysql_audit:[8337]: 87: User: root[root] @ localhost [] Command: Query Query: select * from t1 It appears that two of each event is being shown, but in actuality, these are two separate event types - the result event and the status event. This could be refined further by changing the audit_syslog_notify function to handle the different event sub-types in a different manner. So far, it seems that the logging is working with events showing up in the syslog output. The issue now is that the counters created earlier to track the number of events by type are not accessible when the plugin is being run. Instead there needs to be a way to expose the plugin specific information to the service and vice versa. This could be done via the information_schema plugin api, but for something as simple as counters, the obvious choice is the system status variables. This is done using the standard structure and the declaration: /* Plugin status variables for SHOW STATUS */ static struct st_mysql_show_var audit_syslog_status[]= { { "Audit_syslog_total_calls", (char *) &total_number_of_calls, SHOW_INT }, { "Audit_syslog_general_events", (char *) &number_of_calls_general, SHOW_INT }, { "Audit_syslog_connection_events", (char *) &number_of_calls_connection, SHOW_INT }, { 0, 0, SHOW_INT } }; The structure is simply the name that will be displaying in the mysql service, the address of the associated variables, and the data type being used for the counter. It is finished with a blank structure to show that there are no more variables. Remember that status variables may have the same name for variables from other plugin, so it is considered appropriate to add the plugin name at the start of the status variable name to avoid confusion. Looking at the status variables in the mysql client shows something like the following: mysql> show global status like "audit%"; +--------------------------------+-------+ | Variable_name | Value | +--------------------------------+-------+ | Audit_syslog_connection_events | 1 | | Audit_syslog_general_events | 2 | | Audit_syslog_total_calls | 3 | +--------------------------------+-------+ 3 rows in set (0.00 sec) The final connectivity piece for the plugin is to allow the interactive change of the logging level between the plugin and the system. This requires the ability to send changes via the mysql service through to the plugin. This is done using the system variables interface and defining a single variable to keep track of the active logging level for the facility. /* Plugin system variables for SHOW VARIABLES */ static MYSQL_SYSVAR_STR(loglevel, audit_loglevel, PLUGIN_VAR_RQCMDARG, "User can specify the log level for auditing", audit_loglevel_check, audit_loglevel_update, "LOG_NOTICE"); static struct st_mysql_sys_var* audit_syslog_sysvars[] = { MYSQL_SYSVAR(loglevel), NULL }; So now the system variable 'loglevel' is defined for the plugin and associated to the global variable 'audit_loglevel'. The check or validation function is defined to make sure that no garbage values are attempted in the update of the variable. The update function is used to save the new value to the variable. Note that the audit_syslog_sysvars structure is defined in the general plugin descriptor to associate the link between the plugin and the system and how much they interact. Next comes the implementation of the validation function and the update function for the system variable. It is worth noting that if you have a simple numeric such as integers for the variable types, the validate function is often not required as MySQL will handle the automatic check and validation of simple types. /* longest valid value */ #define MAX_LOGLEVEL_SIZE 100 /* hold the valid values */ static const char *possible_modes[]= { "LOG_ERROR", "LOG_WARNING", "LOG_NOTICE", NULL }; static int audit_loglevel_check( THD* thd, /*!< in: thread handle */ struct st_mysql_sys_var* var, /*!< in: pointer to system variable */ void* save, /*!< out: immediate result for update function */ struct st_mysql_value* value) /*!< in: incoming string */ { char buff[MAX_LOGLEVEL_SIZE]; const char *str; const char **found; int length; length= sizeof(buff); if (!(str= value->val_str(value, buff, &length))) return 1; /* We need to return a pointer to a locally allocated value in "save". Here we pick to search for the supplied value in an global array of constant strings and return a pointer to one of them. The other possiblity is to use the thd_alloc() function to allocate a thread local buffer instead of the global constants. */ for (found= possible_modes; *found; found++) { if (!strcmp(*found, str)) { *(const char**)save= *found; return 0; } } return 1; } The validation function is simply to take the value being passed in via the SET GLOBAL VARIABLE command and check if it is one of the pre-defined values allowed in our possible_values array. If it is found to be valid, then the value is assigned to the save variable ready for passing through to the update function. static void audit_loglevel_update( THD* thd, /*!< in: thread handle */ struct st_mysql_sys_var* var, /*!< in: system variable being altered */ void* var_ptr, /*!< out: pointer to dynamic variable */ const void* save) /*!< in: pointer to temporary storage */ { /* assign the new value so that the server can read it */ *(char **) var_ptr= *(char **) save; /* assign the new value to the internal variable */ audit_loglevel= *(char **) save; } Since all the validation has been done already, the update function is quite simple for this plugin. The first part is to update the system variable pointer so that the server can read the value. The second part is to update our own global plugin variable for tracking the value. Notice that the save variable is passed in as a void type to allow handling of various data types, so it must be cast to the appropriate data type when assigning it to the variables. Looking at how the latest changes affect the usage of the plugin and the interaction within the server shows: mysql> show global variables like "audit%"; +-----------------------+------------+ | Variable_name | Value | +-----------------------+------------+ | audit_syslog_loglevel | LOG_NOTICE | +-----------------------+------------+ 1 row in set (0.00 sec) mysql> set global audit_syslog_loglevel="LOG_ERROR"; Query OK, 0 rows affected (0.00 sec) mysql> show global status like "audit%"; +--------------------------------+-------+ | Variable_name | Value | +--------------------------------+-------+ | Audit_syslog_connection_events | 1 | | Audit_syslog_general_events | 11 | | Audit_syslog_total_calls | 12 | +--------------------------------+-------+ 3 rows in set (0.00 sec) mysql> show global variables like "audit%"; +-----------------------+-----------+ | Variable_name | Value | +-----------------------+-----------+ | audit_syslog_loglevel | LOG_ERROR | +-----------------------+-----------+ 1 row in set (0.00 sec) So now we have a plugin that will audit the events on the system and log the details to the system log. It allows for interaction to see the number of different events within the server details and provides a mechanism to change the logging level interactively via the standard system methods of the SET command. A more complex auditing plugin may have more detailed code, but each of the above areas is what will be involved and simply expanded on to add more functionality. With the above skeleton code, it is now possible to create your own audit plugins to implement your own auditing requirements. If, however, you are not of the coding persuasion, then you could always consider the option of the MySQL Enterprise Audit plugin that is available to purchase.

Read the article

SQL Server 2012 - AlwaysOn

- by Claus Jandausch

Ich war nicht nur irritiert, ich war sogar regelrecht schockiert - und für einen kurzen Moment sprachlos (was nur selten der Fall ist). Gerade eben hatte mich jemand gefragt "Wann Oracle denn etwas Vergleichbares wie AlwaysOn bieten würde - und ob überhaupt?" War ich hier im falschen Film gelandet? Ich konnte nicht anders, als meinen Unmut kundzutun und zu erklären, dass die Fragestellung normalerweise anders herum läuft. Zugegeben - es mag vielleicht strittige Punkte geben im Vergleich zwischen Oracle und SQL Server - bei denen nicht unbedingt immer Oracle die Nase vorn haben muss - aber das Thema Clustering für Hochverfügbarkeit (HA), Disaster Recovery (DR) und Skalierbarkeit gehört mit Sicherheit nicht dazu. Dieses Erlebnis hakte ich am Nachgang als Einzelfall ab, der so nie wieder vorkommen würde. Bis ich kurz darauf eines Besseren belehrt wurde und genau die selbe Frage erneut zu hören bekam. Diesmal sogar im Exadata-Umfeld und einem Oracle Stretch Cluster. Einmal ist keinmal, doch zweimal ist einmal zu viel... Getreu diesem alten Motto war mir klar, dass man das so nicht länger stehen lassen konnte. Ich habe keine Ahnung, wie die Microsoft Marketing Abteilung es geschafft hat, unter dem AlwaysOn Brading eine innovative Technologie vermuten zu lassen - aber sie hat ihren Job scheinbar gut gemacht. Doch abgesehen von einem guten Marketing, stellt sich natürlich die Frage, was wirklich dahinter steckt und wie sich das Ganze mit Oracle vergleichen lässt - und ob überhaupt? Damit wären wir wieder bei der ursprünglichen Frage angelangt. So viel zum Hintergrund dieses Blogbeitrags - von meiner Antwort handelt der restliche Blog. "Windows was the God ..." Um den wahren Unterschied zwischen Oracle und Microsoft verstehen zu können, muss man zunächst das bedeutendste Microsoft Dogma kennen. Es lässt sich schlicht und einfach auf den Punkt bringen: "Alles muss auf Windows basieren." Die Überschrift dieses Absatzes ist kein von mir erfundener Ausspruch, sondern ein Zitat. Konkret stammt es aus einem längeren Artikel von Kurt Eichenwald in der Vanity Fair aus dem August 2012. Er lautet Microsoft's Lost Decade und sei jedem ans Herz gelegt, der die "Microsoft-Maschinerie" unter Steve Ballmer und einige ihrer Kuriositäten besser verstehen möchte. "YOU TALKING TO ME?" Microsoft C.E.O. Steve Ballmer bei seiner Keynote auf der 2012 International Consumer Electronics Show in Las Vegas am 9. Januar Manche Dinge in diesem Artikel mögen überspitzt dargestellt erscheinen - sind sie aber nicht. Vieles davon kannte ich bereits aus eigener Erfahrung und kann es nur bestätigen. Anderes hat sich mir erst so richtig erschlossen. Insbesondere die folgenden Passagen führten zum Aha-Erlebnis: “Windows was the god—everything had to work with Windows,” said Stone... “Every little thing you want to write has to build off of Windows (or other existing roducts),” one software engineer said. “It can be very confusing, …” Ich habe immer schon darauf hingewiesen, dass in einem SQL Server Failover Cluster die Microsoft Datenbank eigentlich nichts Nenneswertes zum Geschehen beiträgt, sondern sich voll und ganz auf das Windows Betriebssystem verlässt. Deshalb muss man auch die Windows Server Enterprise Edition installieren, soll ein Failover Cluster für den SQL Server eingerichtet werden. Denn hier werden die Cluster Services geliefert - nicht mit dem SQL Server. Er ist nur lediglich ein weiteres Server Produkt, für das Windows in Ausfallszenarien genutzt werden kann - so wie Microsoft Exchange beispielsweise, oder Microsoft SharePoint, oder irgendein anderes Server Produkt das auf Windows gehostet wird. Auch Oracle kann damit genutzt werden. Das Stichwort lautet hier: Oracle Failsafe. Nur - warum sollte man das tun, wenn gleichzeitig eine überlegene Technologie wie die Oracle Real Application Clusters (RAC) zur Verfügung steht, die dann auch keine Windows Enterprise Edition voraussetzen, da Oracle die eigene Clusterware liefert. Welche darüber hinaus für kürzere Failover-Zeiten sorgt, da diese Cluster-Technologie Datenbank-integriert ist und sich nicht auf "Dritte" verlässt. Wenn man sich also schon keine technischen Vorteile mit einem SQL Server Failover Cluster erkauft, sondern zusätzlich noch versteckte Lizenzkosten durch die Lizenzierung der Windows Server Enterprise Edition einhandelt, warum hat Microsoft dann in den vergangenen Jahren seit SQL Server 2000 nicht ebenfalls an einer neuen und innovativen Lösung gearbeitet, die mit Oracle RAC mithalten kann? Entwickler hat Microsoft genügend? Am Geld kann es auch nicht liegen? Lesen Sie einfach noch einmal die beiden obenstehenden Zitate und sie werden den Grund verstehen. Anders lässt es sich ja auch gar nicht mehr erklären, dass AlwaysOn aus zwei unterschiedlichen Technologien besteht, die beide jedoch wiederum auf dem Windows Server Failover Clustering (WSFC) basieren. Denn daraus ergeben sich klare Nachteile - aber dazu später mehr. Um AlwaysOn zu verstehen, sollte man sich zunächst kurz in Erinnerung rufen, was Microsoft bisher an HA/DR (High Availability/Desaster Recovery) Lösungen für SQL Server zur Verfügung gestellt hat. Replikation Basiert auf logischer Replikation und Pubisher/Subscriber Architektur Transactional Replication Merge Replication Snapshot Replication Microsoft's Replikation ist vergleichbar mit Oracle GoldenGate. Oracle GoldenGate stellt jedoch die umfassendere Technologie dar und bietet High Performance. Log Shipping Microsoft's Log Shipping stellt eine einfache Technologie dar, die vergleichbar ist mit Oracle Managed Recovery in Oracle Version 7. Das Log Shipping besitzt folgende Merkmale: Transaction Log Backups werden von Primary nach Secondary/ies geschickt Einarbeitung (z.B. Restore) auf jedem Secondary individuell Optionale dritte Server Instanz (Monitor Server) für Überwachung und Alarm Log Restore Unterbrechung möglich für Read-Only Modus (Secondary) Keine Unterstützung von Automatic Failover Database Mirroring Microsoft's Database Mirroring wurde verfügbar mit SQL Server 2005, sah aus wie Oracle Data Guard in Oracle 9i, war funktional jedoch nicht so umfassend. Für ein HA/DR Paar besteht eine 1:1 Beziehung, um die produktive Datenbank (Principle DB) abzusichern. Auf der Standby Datenbank (Mirrored DB) werden alle Insert-, Update- und Delete-Operationen nachgezogen. Modi Synchron (High-Safety Modus) Asynchron (High-Performance Modus) Automatic Failover Unterstützt im High-Safety Modus (synchron) Witness Server vorausgesetzt Zur Frage der Kontinuität Es stellt sich die Frage, wie es um diesen Technologien nun im Zusammenhang mit SQL Server 2012 bestellt ist. Unter Fanfaren seinerzeit eingeführt, war Database Mirroring das erklärte Mittel der Wahl. Ich bin kein Produkt Manager bei Microsoft und kann hierzu nur meine Meinung äußern, aber zieht man den SQL AlwaysOn Team Blog heran, so sieht es nicht gut aus für das Database Mirroring - zumindest nicht langfristig. "Does AlwaysOn Availability Group replace Database Mirroring going forward?” “The short answer is we recommend that you migrate from the mirroring configuration or even mirroring and log shipping configuration to using Availability Group. Database Mirroring will still be available in the Denali release but will be phased out over subsequent releases. Log Shipping will continue to be available in future releases.” Damit wären wir endlich beim eigentlichen Thema angelangt. Was ist eine sogenannte Availability Group und was genau hat es mit der vielversprechend klingenden Bezeichnung AlwaysOn auf sich? SQL Server 2012 - AlwaysOn Zwei HA-Features verstekcne sich hinter dem “AlwaysOn”-Branding. Einmal das AlwaysOn Failover Clustering aka SQL Server Failover Cluster Instances (FCI) - zum Anderen die AlwaysOn Availability Groups. Failover Cluster Instances (FCI) Entspricht ungefähr dem Stretch Cluster Konzept von Oracle Setzt auf Windows Server Failover Clustering (WSFC) auf Bietet HA auf Instanz-Ebene AlwaysOn Availability Groups (Verfügbarkeitsgruppen) Ähnlich der Idee von Consistency Groups, wie in Storage-Level Replikations-Software von z.B. EMC SRDF Abhängigkeiten zu Windows Server Failover Clustering (WSFC) Bietet HA auf Datenbank-Ebene Hinweis: Verwechseln Sie nicht eine SQL Server Datenbank mit einer Oracle Datenbank. Und auch nicht eine Oracle Instanz mit einer SQL Server Instanz. Die gleichen Begriffe haben hier eine andere Bedeutung - nicht selten ein Grund, weshalb Oracle- und Microsoft DBAs schnell aneinander vorbei reden. Denken Sie bei einer SQL Server Datenbank eher an ein Oracle Schema, das kommt der Sache näher. So etwas wie die SQL Server Northwind Datenbank ist vergleichbar mit dem Oracle Scott Schema. Wenn Sie die genauen Unterschiede kennen möchten, finden Sie eine detaillierte Beschreibung in meinem Buch "Oracle10g Release 2 für Windows und .NET", erhältich bei Lehmanns, Amazon, etc. Windows Server Failover Clustering (WSFC) Wie man sieht, basieren beide AlwaysOn Technologien wiederum auf dem Windows Server Failover Clustering (WSFC), um einerseits Hochverfügbarkeit auf Ebene der Instanz zu gewährleisten und andererseits auf der Datenbank-Ebene. Deshalb nun eine kurze Beschreibung der WSFC. Die WSFC sind ein mit dem Windows Betriebssystem geliefertes Infrastruktur-Feature, um HA für Server Anwendungen, wie Microsoft Exchange, SharePoint, SQL Server, etc. zu bieten. So wie jeder andere Cluster, besteht ein WSFC Cluster aus einer Gruppe unabhängiger Server, die zusammenarbeiten, um die Verfügbarkeit einer Applikation oder eines Service zu erhöhen. Falls ein Cluster-Knoten oder -Service ausfällt, kann der auf diesem Knoten bisher gehostete Service automatisch oder manuell auf einen anderen im Cluster verfügbaren Knoten transferriert werden - was allgemein als Failover bekannt ist. Unter SQL Server 2012 verwenden sowohl die AlwaysOn Avalability Groups, als auch die AlwaysOn Failover Cluster Instances die WSFC als Plattformtechnologie, um Komponenten als WSFC Cluster-Ressourcen zu registrieren. Verwandte Ressourcen werden in eine Ressource Group zusammengefasst, die in Abhängigkeit zu anderen WSFC Cluster-Ressourcen gebracht werden kann. Der WSFC Cluster Service kann jetzt die Notwendigkeit zum Neustart der SQL Server Instanz erfassen oder einen automatischen Failover zu einem anderen Server-Knoten im WSFC Cluster auslösen. Failover Cluster Instances (FCI) Eine SQL Server Failover Cluster Instanz (FCI) ist eine einzelne SQL Server Instanz, die in einem Failover Cluster betrieben wird, der aus mehreren Windows Server Failover Clustering (WSFC) Knoten besteht und so HA (High Availability) auf Ebene der Instanz bietet. Unter Verwendung von Multi-Subnet FCI kann auch Remote DR (Disaster Recovery) unterstützt werden. Eine weitere Option für Remote DR besteht darin, eine unter FCI gehostete Datenbank in einer Availability Group zu betreiben. Hierzu später mehr. FCI und WSFC Basis FCI, das für lokale Hochverfügbarkeit der Instanzen genutzt wird, ähnelt der veralteten Architektur eines kalten Cluster (Aktiv-Passiv). Unter SQL Server 2008 wurde diese Technologie SQL Server 2008 Failover Clustering genannt. Sie nutzte den Windows Server Failover Cluster. In SQL Server 2012 hat Microsoft diese Basistechnologie unter der Bezeichnung AlwaysOn zusammengefasst. Es handelt sich aber nach wie vor um die klassische Aktiv-Passiv-Konfiguration. Der Ablauf im Failover-Fall ist wie folgt: Solange kein Hardware-oder System-Fehler auftritt, werden alle Dirty Pages im Buffer Cache auf Platte geschrieben Alle entsprechenden SQL Server Services (Dienste) in der Ressource Gruppe werden auf dem aktiven Knoten gestoppt Die Ownership der Ressource Gruppe wird auf einen anderen Knoten der FCI transferriert Der neue Owner (Besitzer) der Ressource Gruppe startet seine SQL Server Services (Dienste) Die Connection-Anforderungen einer Client-Applikation werden automatisch auf den neuen aktiven Knoten mit dem selben Virtuellen Network Namen (VNN) umgeleitet Abhängig vom Zeitpunkt des letzten Checkpoints, kann die Anzahl der Dirty Pages im Buffer Cache, die noch auf Platte geschrieben werden müssen, zu unvorhersehbar langen Failover-Zeiten führen. Um diese Anzahl zu drosseln, besitzt der SQL Server 2012 eine neue Fähigkeit, die Indirect Checkpoints genannt wird. Indirect Checkpoints ähnelt dem Fast-Start MTTR Target Feature der Oracle Datenbank, das bereits mit Oracle9i verfügbar war. SQL Server Multi-Subnet Clustering Ein SQL Server Multi-Subnet Failover Cluster entspricht vom Konzept her einem Oracle RAC Stretch Cluster. Doch dies ist nur auf den ersten Blick der Fall. Im Gegensatz zu RAC ist in einem lokalen SQL Server Failover Cluster jeweils nur ein Knoten aktiv für eine Datenbank. Für die Datenreplikation zwischen geografisch entfernten Sites verlässt sich Microsoft auf 3rd Party Lösungen für das Storage Mirroring. Die Verbesserung dieses Szenario mit einer SQL Server 2012 Implementierung besteht schlicht darin, dass eine VLAN-Konfiguration (Virtual Local Area Network) nun nicht mehr benötigt wird, so wie dies bisher der Fall war. Das folgende Diagramm stellt dar, wie der Ablauf mit SQL Server 2012 gehandhabt wird. In Site A und Site B wird HA jeweils durch einen lokalen Aktiv-Passiv-Cluster sichergestellt. Besondere Aufmerksamkeit muss hier der Konfiguration und dem Tuning geschenkt werden, da ansonsten völlig inakzeptable Failover-Zeiten resultieren. Dies liegt darin begründet, weil die Downtime auf Client-Seite nun nicht mehr nur von der reinen Failover-Zeit abhängt, sondern zusätzlich von der Dauer der DNS Replikation zwischen den DNS Servern. (Rufen Sie sich in Erinnerung, dass wir gerade von Multi-Subnet Clustering sprechen). Außerdem ist zu berücksichtigen, wie schnell die Clients die aktualisierten DNS Informationen abfragen. Spezielle Konfigurationen für Node Heartbeat, HostRecordTTL (Host Record Time-to-Live) und Intersite Replication Frequeny für Active Directory Sites und Services werden notwendig. Default TTL für Windows Server 2008 R2: 20 Minuten Empfohlene Einstellung: 1 Minute DNS Update Replication Frequency in Windows Umgebung: 180 Minuten Empfohlene Einstellung: 15 Minuten (minimaler Wert) Betrachtet man diese Werte, muss man feststellen, dass selbst eine optimale Konfiguration die rigiden SLAs (Service Level Agreements) heutiger geschäftskritischer Anwendungen für HA und DR nicht erfüllen kann. Denn dies impliziert eine auf der Client-Seite erlebte Failover-Zeit von insgesamt 16 Minuten. Hierzu ein Auszug aus der SQL Server 2012 Online Dokumentation: Cons: If a cross-subnet failover occurs, the client recovery time could be 15 minutes or longer, depending on your HostRecordTTL setting and the setting of your cross-site DNS/AD replication schedule. Wir sind hier an einem Punkt unserer Überlegungen angelangt, an dem sich erklärt, weshalb ich zuvor das "Windows was the God ..." Zitat verwendet habe. Die unbedingte Abhängigkeit zu Windows wird zunehmend zum Problem, da sie die Komplexität einer Microsoft-basierenden Lösung erhöht, anstelle sie zu reduzieren. Und Komplexität ist das Letzte, was sich CIOs heutzutage wünschen. Zur Ehrenrettung des SQL Server 2012 und AlwaysOn muss man sagen, dass derart lange Failover-Zeiten kein unbedingtes "Muss" darstellen, sondern ein "Kann". Doch auch ein "Kann" kann im unpassenden Moment unvorhersehbare und kostspielige Folgen haben. Die Unabsehbarkeit ist wiederum Ursache vieler an der Implementierung beteiligten Komponenten und deren Abhängigkeiten, wie beispielsweise drei Cluster-Lösungen (zwei von Microsoft, eine 3rd Party Lösung). Wie man die Sache auch dreht und wendet, kommt man an diesem Fakt also nicht vorbei - ganz unabhängig von der Dauer einer Downtime oder Failover-Zeiten. Im Gegensatz zu AlwaysOn und der hier vorgestellten Version eines Stretch-Clusters, vermeidet eine entsprechende Oracle Implementierung eine derartige Komplexität, hervorgerufen duch multiple Abhängigkeiten. Den Unterschied machen Datenbank-integrierte Mechanismen, wie Fast Application Notification (FAN) und Fast Connection Failover (FCF). Für Oracle MAA Konfigurationen (Maximum Availability Architecture) sind Inter-Site Failover-Zeiten im Bereich von Sekunden keine Seltenheit. Wenn Sie dem Link zur Oracle MAA folgen, finden Sie außerdem eine Reihe an Customer Case Studies. Auch dies ist ein wichtiges Unterscheidungsmerkmal zu AlwaysOn, denn die Oracle Technologie hat sich bereits zigfach in höchst kritischen Umgebungen bewährt. Availability Groups (Verfügbarkeitsgruppen) Die sogenannten Availability Groups (Verfügbarkeitsgruppen) sind - neben FCI - der weitere Baustein von AlwaysOn. Hinweis: Bevor wir uns näher damit beschäftigen, sollten Sie sich noch einmal ins Gedächtnis rufen, dass eine SQL Server Datenbank nicht die gleiche Bedeutung besitzt, wie eine Oracle Datenbank, sondern eher einem Oracle Schema entspricht. So etwas wie die SQL Server Northwind Datenbank ist vergleichbar mit dem Oracle Scott Schema. Eine Verfügbarkeitsgruppe setzt sich zusammen aus einem Set mehrerer Benutzer-Datenbanken, die im Falle eines Failover gemeinsam als Gruppe behandelt werden. Eine Verfügbarkeitsgruppe unterstützt ein Set an primären Datenbanken (primäres Replikat) und einem bis vier Sets von entsprechenden sekundären Datenbanken (sekundäre Replikate). Es können jedoch nicht alle SQL Server Datenbanken einer AlwaysOn Verfügbarkeitsgruppe zugeordnet werden. Der SQL Server Spezialist Michael Otey zählt in seinem SQL Server Pro Artikel folgende Anforderungen auf: Verfügbarkeitsgruppen müssen mit Benutzer-Datenbanken erstellt werden. System-Datenbanken können nicht verwendet werden Die Datenbanken müssen sich im Read-Write Modus befinden. Read-Only Datenbanken werden nicht unterstützt Die Datenbanken in einer Verfügbarkeitsgruppe müssen Multiuser Datenbanken sein Sie dürfen nicht das AUTO_CLOSE Feature verwenden Sie müssen das Full Recovery Modell nutzen und es muss ein vollständiges Backup vorhanden sein Eine gegebene Datenbank kann sich nur in einer einzigen Verfügbarkeitsgruppe befinden und diese Datenbank düerfen nicht für Database Mirroring konfiguriert sein Microsoft empfiehl außerdem, dass der Verzeichnispfad einer Datenbank auf dem primären und sekundären Server identisch sein sollte Wie man sieht, eignen sich Verfügbarkeitsgruppen nicht, um HA und DR vollständig abzubilden. Die Unterscheidung zwischen der Instanzen-Ebene (FCI) und Datenbank-Ebene (Availability Groups) ist von hoher Bedeutung. Vor kurzem wurde mir gesagt, dass man mit den Verfügbarkeitsgruppen auf Shared Storage verzichten könne und dadurch Kosten spart. So weit so gut ... Man kann natürlich eine Installation rein mit Verfügbarkeitsgruppen und ohne FCI durchführen - aber man sollte sich dann darüber bewusst sein, was man dadurch alles nicht abgesichert hat - und dies wiederum für Desaster Recovery (DR) und SLAs (Service Level Agreements) bedeutet. Kurzum, um die Kombination aus beiden AlwaysOn Produkten und der damit verbundene Komplexität kommt man wohl in der Praxis nicht herum. Availability Groups und WSFC AlwaysOn hängt von Windows Server Failover Clustering (WSFC) ab, um die aktuellen Rollen der Verfügbarkeitsreplikate einer Verfügbarkeitsgruppe zu überwachen und zu verwalten, und darüber zu entscheiden, wie ein Failover-Ereignis die Verfügbarkeitsreplikate betrifft. Das folgende Diagramm zeigt de Beziehung zwischen Verfügbarkeitsgruppen und WSFC: Der Verfügbarkeitsmodus ist eine Eigenschaft jedes Verfügbarkeitsreplikats. Synychron und Asynchron können also gemischt werden: Availability Modus (Verfügbarkeitsmodus) Asynchroner Commit-Modus Primäres replikat schließt Transaktionen ohne Warten auf Sekundäres Synchroner Commit-Modus Primäres Replikat wartet auf Commit von sekundärem Replikat Failover Typen Automatic Manual Forced (mit möglichem Datenverlust) Synchroner Commit-Modus Geplanter, manueller Failover ohne Datenverlust Automatischer Failover ohne Datenverlust Asynchroner Commit-Modus Nur Forced, manueller Failover mit möglichem Datenverlust Der SQL Server kennt keinen separaten Switchover Begriff wie in Oracle Data Guard. Für SQL Server werden alle Role Transitions als Failover bezeichnet. Tatsächlich unterstützt der SQL Server keinen Switchover für asynchrone Verbindungen. Es gibt nur die Form des Forced Failover mit möglichem Datenverlust. Eine ähnliche Fähigkeit wie der Switchover unter Oracle Data Guard ist so nicht gegeben. SQL Sever FCI mit Availability Groups (Verfügbarkeitsgruppen) Neben den Verfügbarkeitsgruppen kann eine zweite Failover-Ebene eingerichtet werden, indem SQL Server FCI (auf Shared Storage) mit WSFC implementiert wird. Ein Verfügbarkeitesreplikat kann dann auf einer Standalone Instanz gehostet werden, oder einer FCI Instanz. Zum Verständnis: Die Verfügbarkeitsgruppen selbst benötigen kein Shared Storage. Diese Kombination kann verwendet werden für lokale HA auf Ebene der Instanz und DR auf Datenbank-Ebene durch Verfügbarkeitsgruppen. Das folgende Diagramm zeigt dieses Szenario: Achtung! Hier handelt es sich nicht um ein Pendant zu Oracle RAC plus Data Guard, auch wenn das Bild diesen Eindruck vielleicht vermitteln mag - denn alle sekundären Knoten im FCI sind rein passiv. Es existiert außerdem eine weitere und ernsthafte Einschränkung: SQL Server Failover Cluster Instanzen (FCI) unterstützen nicht das automatische AlwaysOn Failover für Verfügbarkeitsgruppen. Jedes unter FCI gehostete Verfügbarkeitsreplikat kann nur für manuelles Failover konfiguriert werden. Lesbare Sekundäre Replikate Ein oder mehrere Verfügbarkeitsreplikate in einer Verfügbarkeitsgruppe können für den lesenden Zugriff konfiguriert werden, wenn sie als sekundäres Replikat laufen. Dies ähnelt Oracle Active Data Guard, jedoch gibt es Einschränkungen. Alle Abfragen gegen die sekundäre Datenbank werden automatisch auf das Snapshot Isolation Level abgebildet. Es handelt sich dabei um eine Versionierung der Rows. Microsoft versuchte hiermit die Oracle MVRC (Multi Version Read Consistency) nachzustellen. Tatsächlich muss man die SQL Server Snapshot Isolation eher mit Oracle Flashback vergleichen. Bei der Implementierung des Snapshot Isolation Levels handelt sich um ein nachträglich aufgesetztes Feature und nicht um einen inhärenten Teil des Datenbank-Kernels, wie im Falle Oracle. (Ich werde hierzu in Kürze einen weiteren Blogbeitrag verfassen, wenn ich mich mit der neuen SQL Server 2012 Core Lizenzierung beschäftige.) Für die Praxis entstehen aus der Abbildung auf das Snapshot Isolation Level ernsthafte Restriktionen, derer man sich für den Betrieb in der Praxis bereits vorab bewusst sein sollte: Sollte auf der primären Datenbank eine aktive Transaktion zu dem Zeitpunkt existieren, wenn ein lesbares sekundäres Replikat in die Verfügbarkeitsgruppe aufgenommen wird, werden die Row-Versionen auf der korrespondierenden sekundären Datenbank nicht sofort vollständig verfügbar sein. Eine aktive Transaktion auf dem primären Replikat muss zuerst abgeschlossen (Commit oder Rollback) und dieser Transaktions-Record auf dem sekundären Replikat verarbeitet werden. Bis dahin ist das Isolation Level Mapping auf der sekundären Datenbank unvollständig und Abfragen sind temporär geblockt. Microsoft sagt dazu: "This is needed to guarantee that row versions are available on the secondary replica before executing the query under snapshot isolation as all isolation levels are implicitly mapped to snapshot isolation." (SQL Storage Engine Blog: AlwaysOn: I just enabled Readable Secondary but my query is blocked?) Grundlegend bedeutet dies, dass ein aktives lesbares Replikat nicht in die Verfügbarkeitsgruppe aufgenommen werden kann, ohne das primäre Replikat vorübergehend stillzulegen. Da Leseoperationen auf das Snapshot Isolation Transaction Level abgebildet werden, kann die Bereinigung von Ghost Records auf dem primären Replikat durch Transaktionen auf einem oder mehreren sekundären Replikaten geblockt werden - z.B. durch eine lang laufende Abfrage auf dem sekundären Replikat. Diese Bereinigung wird auch blockiert, wenn die Verbindung zum sekundären Replikat abbricht oder der Datenaustausch unterbrochen wird. Auch die Log Truncation wird in diesem Zustant verhindert. Wenn dieser Zustand längere Zeit anhält, empfiehlt Microsoft das sekundäre Replikat aus der Verfügbarkeitsgruppe herauszunehmen - was ein ernsthaftes Downtime-Problem darstellt. Die Read-Only Workload auf den sekundären Replikaten kann eingehende DDL Änderungen blockieren. Obwohl die Leseoperationen aufgrund der Row-Versionierung keine Shared Locks halten, führen diese Operatioen zu Sch-S Locks (Schemastabilitätssperren). DDL-Änderungen durch Redo-Operationen können dadurch blockiert werden. Falls DDL aufgrund konkurrierender Lese-Workload blockiert wird und der Schwellenwert für 'Recovery Interval' (eine SQL Server Konfigurationsoption) überschritten wird, generiert der SQL Server das Ereignis sqlserver.lock_redo_blocked, welches Microsoft zum Kill der blockierenden Leser empfiehlt. Auf die Verfügbarkeit der Anwendung wird hierbei keinerlei Rücksicht genommen. Keine dieser Einschränkungen existiert mit Oracle Active Data Guard. Backups auf sekundären Replikaten Über die sekundären Replikate können Backups (BACKUP DATABASE via Transact-SQL) nur als copy-only Backups einer vollständigen Datenbank, Dateien und Dateigruppen erstellt werden. Das Erstellen inkrementeller Backups ist nicht unterstützt, was ein ernsthafter Rückstand ist gegenüber der Backup-Unterstützung physikalischer Standbys unter Oracle Data Guard. Hinweis: Ein möglicher Workaround via Snapshots, bleibt ein Workaround. Eine weitere Einschränkung dieses Features gegenüber Oracle Data Guard besteht darin, dass das Backup eines sekundären Replikats nicht ausgeführt werden kann, wenn es nicht mit dem primären Replikat kommunizieren kann. Darüber hinaus muss das sekundäre Replikat synchronisiert sein oder sich in der Synchronisation befinden, um das Beackup auf dem sekundären Replikat erstellen zu können. Vergleich von Microsoft AlwaysOn mit der Oracle MAA Ich komme wieder zurück auf die Eingangs erwähnte, mehrfach an mich gestellte Frage "Wann denn - und ob überhaupt - Oracle etwas Vergleichbares wie AlwaysOn bieten würde?" und meine damit verbundene (kurze) Irritation. Wenn Sie diesen Blogbeitrag bis hierher gelesen haben, dann kennen Sie jetzt meine darauf gegebene Antwort. Der eine oder andere Punkt traf dabei nicht immer auf Jeden zu, was auch nicht der tiefere Sinn und Zweck meiner Antwort war. Wenn beispielsweise kein Multi-Subnet mit im Spiel ist, sind alle diesbezüglichen Kritikpunkte zunächst obsolet. Was aber nicht bedeutet, dass sie nicht bereits morgen schon wieder zum Thema werden könnten (Sag niemals "Nie"). In manch anderes Fettnäpfchen tritt man wiederum nicht unbedingt in einer Testumgebung, sondern erst im laufenden Betrieb. Erst recht nicht dann, wenn man sich potenzieller Probleme nicht bewusst ist und keine dedizierten Tests startet. Und wer AlwaysOn erfolgreich positionieren möchte, wird auch gar kein Interesse daran haben, auf mögliche Schwachstellen und den besagten Teufel im Detail aufmerksam zu machen. Das ist keine Unterstellung - es ist nur menschlich. Außerdem ist es verständlich, dass man sich in erster Linie darauf konzentriert "was geht" und "was gut läuft", anstelle auf das "was zu Problemen führen kann" oder "nicht funktioniert". Wer will schon der Miesepeter sein? Für mich selbst gesprochen, kann ich nur sagen, dass ich lieber vorab von allen möglichen Einschränkungen wissen möchte, anstelle sie dann nach einer kurzen Zeit der heilen Welt schmerzhaft am eigenen Leib erfahren zu müssen. Ich bin davon überzeugt, dass es Ihnen nicht anders geht. Nachfolgend deshalb eine Zusammenfassung all jener Punkte, die ich im Vergleich zur Oracle MAA (Maximum Availability Architecture) als unbedingt Erwähnenswert betrachte, falls man eine Evaluierung von Microsoft AlwaysOn in Betracht zieht. 1. AlwaysOn ist eine komplexe Technologie Der SQL Server AlwaysOn Stack ist zusammengesetzt aus drei verschiedenen Technlogien: Windows Server Failover Clustering (WSFC) SQL Server Failover Cluster Instances (FCI) SQL Server Availability Groups (Verfügbarkeitsgruppen) Man kann eine derartige Lösung nicht als nahtlos bezeichnen, wofür auch die vielen von Microsoft dargestellten Einschränkungen sprechen. Während sich frühere SQL Server Versionen in Richtung eigener HA/DR Technologien entwickelten (wie Database Mirroring), empfiehlt Microsoft nun die Migration. Doch weshalb dieser Schwenk? Er führt nicht zu einem konsisten und robusten Angebot an HA/DR Technologie für geschäftskritische Umgebungen. Liegt die Antwort in meiner These begründet, nach der "Windows was the God ..." noch immer gilt und man die Nachteile der allzu engen Kopplung mit Windows nicht sehen möchte? Entscheiden Sie selbst ... 2. Failover Cluster Instanzen - Kein RAC-Pendant Die SQL Server und Windows Server Clustering Technologie basiert noch immer auf dem veralteten Aktiv-Passiv Modell und führt zu einer Verschwendung von Systemressourcen. In einer Betrachtung von lediglich zwei Knoten erschließt sich auf Anhieb noch nicht der volle Mehrwert eines Aktiv-Aktiv Clusters (wie den Real Application Clusters), wie er von Oracle bereits vor zehn Jahren entwickelt wurde. Doch kennt man die Vorzüge der Skalierbarkeit durch einfaches Hinzufügen weiterer Cluster-Knoten, die dann alle gemeinsam als ein einziges logisches System zusammenarbeiten, versteht man was hinter dem Motto "Pay-as-you-Grow" steckt. In einem Aktiv-Aktiv Cluster geht es zwar auch um Hochverfügbarkeit - und ein Failover erfolgt zudem schneller, als in einem Aktiv-Passiv Modell - aber es geht eben nicht nur darum. An dieser Stelle sei darauf hingewiesen, dass die Oracle 11g Standard Edition bereits die Nutzung von Oracle RAC bis zu vier Sockets kostenfrei beinhaltet. Möchten Sie dazu Windows nutzen, benötigen Sie keine Windows Server Enterprise Edition, da Oracle 11g die eigene Clusterware liefert. Sie kommen in den Genuss von Hochverfügbarkeit und Skalierbarkeit und können dazu die günstigere Windows Server Standard Edition nutzen. 3. SQL Server Multi-Subnet Clustering - Abhängigkeit zu 3rd Party Storage Mirroring Die SQL Server Multi-Subnet Clustering Architektur unterstützt den Aufbau eines Stretch Clusters, basiert dabei aber auf dem Aktiv-Passiv Modell. Das eigentlich Problematische ist jedoch, dass man sich zur Absicherung der Datenbank auf 3rd Party Storage Mirroring Technologie verlässt, ohne Integration zwischen dem Windows Server Failover Clustering (WSFC) und der darunterliegenden Mirroring Technologie. Wenn nun im Cluster ein Failover auf Instanzen-Ebene erfolgt, existiert keine Koordination mit einem möglichen Failover auf Ebene des Storage-Array. 4. Availability Groups (Verfügbarkeitsgruppen) - Vier, oder doch nur Zwei? Ein primäres Replikat erlaubt bis zu vier sekundäre Replikate innerhalb einer Verfügbarkeitsgruppe, jedoch nur zwei im Synchronen Commit Modus. Während dies zwar einen Vorteil gegenüber dem stringenten 1:1 Modell unter Database Mirroring darstellt, fällt der SQL Server 2012 damit immer noch weiter zurück hinter Oracle Data Guard mit bis zu 30 direkten Stanbdy Zielen - und vielen weiteren durch kaskadierende Ziele möglichen. Damit eignet sich Oracle Active Data Guard auch für die Bereitstellung einer Reader-Farm Skalierbarkeit für Internet-basierende Unternehmen. Mit AwaysOn Verfügbarkeitsgruppen ist dies nicht möglich. 5. Availability Groups (Verfügbarkeitsgruppen) - kein asynchrones Switchover Die Technologie der Verfügbarkeitsgruppen wird auch als geeignetes Mittel für administrative Aufgaben positioniert - wie Upgrades oder Wartungsarbeiten. Man muss sich jedoch einem gravierendem Defizit bewusst sein: Im asynchronen Verfügbarkeitsmodus besteht die einzige Möglichkeit für Role Transition im Forced Failover mit Datenverlust! Um den Verlust von Daten durch geplante Wartungsarbeiten zu vermeiden, muss man den synchronen Verfügbarkeitsmodus konfigurieren, was jedoch ernstzunehmende Auswirkungen auf WAN Deployments nach sich zieht. Spinnt man diesen Gedanken zu Ende, kommt man zu dem Schluss, dass die Technologie der Verfügbarkeitsgruppen für geplante Wartungsarbeiten in einem derartigen Umfeld nicht effektiv genutzt werden kann. 6. Automatisches Failover - Nicht immer möglich Sowohl die SQL Server FCI, als auch Verfügbarkeitsgruppen unterstützen automatisches Failover. Möchte man diese jedoch kombinieren, wird das Ergebnis kein automatisches Failover sein. Denn ihr Zusammentreffen im Failover-Fall führt zu Race Conditions (Wettlaufsituationen), weshalb diese Konfiguration nicht länger das automatische Failover zu einem Replikat in einer Verfügbarkeitsgruppe erlaubt. Auch hier bestätigt sich wieder die tiefere Problematik von AlwaysOn, mit einer Zusammensetzung aus unterschiedlichen Technologien und der Abhängigkeit zu Windows. 7. Problematische RTO (Recovery Time Objective) Microsoft postioniert die SQL Server Multi-Subnet Clustering Architektur als brauchbare HA/DR Architektur. Bedenkt man jedoch die Problematik im Zusammenhang mit DNS Replikation und den möglichen langen Wartezeiten auf Client-Seite von bis zu 16 Minuten, sind strenge RTO Anforderungen (Recovery Time Objectives) nicht erfüllbar. Im Gegensatz zu Oracle besitzt der SQL Server keine Datenbank-integrierten Technologien, wie Oracle Fast Application Notification (FAN) oder Oracle Fast Connection Failover (FCF). 8. Problematische RPO (Recovery Point Objective) SQL Server ermöglicht Forced Failover (erzwungenes Failover), bietet jedoch keine Möglichkeit zur automatischen Übertragung der letzten Datenbits von einem alten zu einem neuen primären Replikat, wenn der Verfügbarkeitsmodus asynchron war. Oracle Data Guard hingegen bietet diese Unterstützung durch das Flush Redo Feature. Dies sichert "Zero Data Loss" und beste RPO auch in erzwungenen Failover-Situationen. 9. Lesbare Sekundäre Replikate mit Einschränkungen Aufgrund des Snapshot Isolation Transaction Level für lesbare sekundäre Replikate, besitzen diese Einschränkungen mit Auswirkung auf die primäre Datenbank. Die Bereinigung von Ghost Records auf der primären Datenbank, wird beeinflusst von lang laufenden Abfragen auf der lesabaren sekundären Datenbank. Die lesbare sekundäre Datenbank kann nicht in die Verfügbarkeitsgruppe aufgenommen werden, wenn es aktive Transaktionen auf der primären Datenbank gibt. Zusätzlich können DLL Änderungen auf der primären Datenbank durch Abfragen auf der sekundären blockiert werden. Und imkrementelle Backups werden hier nicht unterstützt. Keine dieser Restriktionen existiert unter Oracle Data Guard.

Read the article

What’s New in ASP.NET 4.0 Part Two: WebForms and Visual Studio Enhancements

- by Rick Strahl

In the last installment I talked about the core changes in the ASP.NET runtime that I’ve been taking advantage of. In this column, I’ll cover the changes to the Web Forms engine and some of the cool improvements in Visual Studio that make Web and general development easier. WebForms The WebForms engine is the area that has received most significant changes in ASP.NET 4.0. Probably the most widely anticipated features are related to managing page client ids and of ViewState on WebForm pages. Take Control of Your ClientIDs Unique ClientID generation in ASP.NET has been one of the most complained about “features” in ASP.NET. Although there’s a very good technical reason for these unique generated ids - they guarantee unique ids for each and every server control on a page - these unique and generated ids often get in the way of client-side JavaScript development and CSS styling as it’s often inconvenient and fragile to work with the long, generated ClientIDs. In ASP.NET 4.0 you can now specify an explicit client id mode on each control or each naming container parent control to control how client ids are generated. By default, ASP.NET generates mangled client ids for any control contained in a naming container (like a Master Page, or a User Control for example). The key to ClientID management in ASP.NET 4.0 are the new ClientIDMode and ClientIDRowSuffix properties. ClientIDMode supports four different ClientID generation settings shown below. For the following examples, imagine that you have a Textbox control named txtName inside of a master page control container on a WebForms page. <%@Page Language="C#" MasterPageFile="~/Site.Master" CodeBehind="WebForm2.aspx.cs" Inherits="WebApplication1.WebForm2" %> <asp:Content ID="content" ContentPlaceHolderID="content" runat="server" ClientIDMode="Static" > <asp:TextBox runat="server" ID="txtName" /> </asp:Content> The four available ClientIDMode values are: AutoID This is the existing behavior in ASP.NET 1.x-3.x where full naming container munging takes place. <input name="ctl00$content$txtName" type="text" id="ctl00_content_txtName" /> This should be familiar to any ASP.NET developer and results in fairly unpredictable client ids that can easily change if the containership hierarchy changes. For example, removing the master page changes the name in this case, so if you were to move a block of script code that works against the control to a non-Master page, the script code immediately breaks. Static This option is the most deterministic setting that forces the control’s ClientID to use its ID value directly. No naming container naming at all is applied and you end up with clean client ids: <input name="ctl00$content$txtName" type="text" id="txtName" /> Note that the name property which is used for postback variables to the server still is munged, but the ClientID property is displayed simply as the ID value that you have assigned to the control. This option is what most of us want to use, but you have to be clear on that because it can potentially cause conflicts with other controls on the page. If there are several instances of the same naming container (several instances of the same user control for example) there can easily be a client id naming conflict. Note that if you assign Static to a data-bound control, like a list child control in templates, you do not get unique ids either, so for list controls where you rely on unique id for child controls, you’ll probably want to use Predictable rather than Static. I’ll write more on this a little later when I discuss ClientIDRowSuffix. Predictable The previous two values are pretty self-explanatory. Predictable however, requires some explanation. To me at least it’s not in the least bit predictable. MSDN defines this value as follows: This algorithm is used for controls that are in data-bound controls. The ClientID value is generated by concatenating the ClientID value of the parent naming container with the ID value of the control. If the control is a data-bound control that generates multiple rows, the value of the data field specified in the ClientIDRowSuffix property is added at the end. For the GridView control, multiple data fields can be specified. If the ClientIDRowSuffix property is blank, a sequential number is added at the end instead of a data-field value. Each segment is separated by an underscore character (_). The key that makes this value a bit confusing is that it relies on the parent NamingContainer’s ClientID to build its own ClientID value. This effectively means that the value is not predictable at all but rather very tightly coupled to the parent naming container’s ClientIDMode setting. For my simple textbox example, if the ClientIDMode property of the parent naming container (Page in this case) is set to “Predictable” you’ll get this: <input name="ctl00$content$txtName" type="text" id="content_txtName" /> which gives an id that based on walking up to the currently active naming container (the MasterPage content container) and starting the id formatting from there downward. Think of this as a semi unique name that’s guaranteed unique only for the naming container. If, on the other hand, the Page is set to “AutoID” you get the following with Predictable on txtName: <input name="ctl00$content$txtName" type="text" id="ctl00_content_txtName" /> The latter is effectively the same as if you specified AutoID because it inherits the AutoID naming from the Page and Content Master Page control of the page. But again - predictable behavior always depends on the parent naming container and how it generates its id, so the id may not always be exactly the same as the AutoID generated value because somewhere in the NamingContainer chain the ClientIDMode setting may be set to a different value. For example, if you had another naming container in the middle that was set to Static you’d end up effectively with an id that starts with the NamingContainers id rather than the whole ctl000_content munging. The most common use for Predictable is likely to be for data-bound controls, which results in each data bound item getting a unique ClientID. Unfortunately, even here the behavior can be very unpredictable depending on which data-bound control you use - I found significant differences in how template controls in a GridView behave from those that are used in a ListView control. For example, GridView creates clean child ClientIDs, while ListView still has a naming container in the ClientID, presumably because of the template container on which you can’t set ClientIDMode. Predictable is useful, but only if all naming containers down the chain use this setting. Otherwise you’re right back to the munged ids that are pretty unpredictable. Another property, ClientIDRowSuffix, can be used in combination with ClientIDMode of Predictable to force a suffix onto list client controls. For example: <asp:GridView runat="server" ID="gvItems" AutoGenerateColumns="false" ClientIDMode="Static" ClientIDRowSuffix="Id"> <Columns> <asp:TemplateField> <ItemTemplate> <asp:Label runat="server" id="txtName" Text='<%# Eval("Name") %>' ClientIDMode="Predictable"/> </ItemTemplate> </asp:TemplateField> <asp:TemplateField> <ItemTemplate> <asp:Label runat="server" id="txtId" Text='<%# Eval("Id") %>' ClientIDMode="Predictable" /> </ItemTemplate> </asp:TemplateField> </Columns> </asp:GridView> generates client Ids inside of a column in the master page described earlier: <td> <span id="txtName_0">Rick</span> </td> where the value after the underscore is the ClientIDRowSuffix field - in this case “Id” of the item data bound to the control. Note that all of the child controls require ClientIDMode=”Predictable” in order for the ClientIDRowSuffix to be applied, and the parent GridView controls need to be set to Static either explicitly or via Naming Container inheritance to give these simple names. It’s a bummer that ClientIDRowSuffix doesn’t work with Static to produce this automatically. Another real problem is that other controls process the ClientIDMode differently. For example, a ListView control processes the Predictable ClientIDMode differently and produces the following with the Static ListView and Predictable child controls: <span id="ctrl0_txtName_0">Rick</span> I couldn’t even figure out a way using ClientIDMode to get a simple ID that also uses a suffix short of falling back to manually generated ids using <%= %> expressions instead. Given the inconsistencies inside of list controls using <%= %>, ids for the ListView might not be a bad idea anyway. Inherit The final setting is Inherit, which is the default for all controls except Page. This means that controls by default inherit the parent naming container’s ClientIDMode setting. For more detailed information on ClientID behavior and different scenarios you can check out a blog post of mine on this subject: http://www.west-wind.com/weblog/posts/54760.aspx. ClientID Enhancements Summary The ClientIDMode property is a welcome addition to ASP.NET 4.0. To me this is probably the most useful WebForms feature as it allows me to generate clean IDs simply by setting ClientIDMode="Static" on either the page or inside of Web.config (in the Pages section) which applies the setting down to the entire page which is my 95% scenario. For the few cases when it matters - for list controls and inside of multi-use user controls or custom server controls) - I can use Predictable or even AutoID to force controls to unique names. For application-level page development, this is easy to accomplish and provides maximum usability for working with client script code against page controls. ViewStateMode Another area of large criticism for WebForms is ViewState. ViewState is used internally by ASP.NET to persist page-level changes to non-postback properties on controls as pages post back to the server. It’s a useful mechanism that works great for the overall mechanics of WebForms, but it can also cause all sorts of overhead for page operation as ViewState can very quickly get out of control and consume huge amounts of bandwidth in your page content. ViewState can also wreak havoc with client-side scripting applications that modify control properties that are tracked by ViewState, which can produce very unpredictable results on a Postback after client-side updates. Over the years in my own development, I’ve often turned off ViewState on pages to reduce overhead. Yes, you lose some functionality, but you can easily implement most of the common functionality in non-ViewState workarounds. Relying less on heavy ViewState controls and sticking with simpler controls or raw HTML constructs avoids getting around ViewState problems. In ASP.NET 3.x and prior, it wasn’t easy to control ViewState - you could turn it on or off and if you turned it off at the page or web.config level, you couldn’t turn it back on for specific controls. In short, it was an all or nothing approach. With ASP.NET 4.0, the new ViewStateMode property gives you more control. It allows you to disable ViewState globally either on the page or web.config level and then turn it back on for specific controls that might need it. ViewStateMode only works when EnableViewState="true" on the page or web.config level (which is the default). You can then use ViewStateMode of Disabled, Enabled or Inherit to control the ViewState settings on the page. If you’re shooting for minimal ViewState usage, the ideal situation is to set ViewStateMode to disabled on the Page or web.config level and only turn it back on particular controls: <%@Page Language="C#" CodeBehind="WebForm2.aspx.cs" Inherits="Westwind.WebStore.WebForm2" ClientIDMode="Static" ViewStateMode="Disabled" EnableViewState="true" %>  <asp:TextBox runat="server" ID="txtName" ViewStateMode="Enabled" />  <asp:TextBox runat="server" ID="txtAddress" /> Note that the EnableViewState="true" at the Page level isn’t required since it’s the default, but it’s important that the value is true. ViewStateMode has no effect if EnableViewState="false" at the page level. The main benefit of ViewStateMode is that it allows you to more easily turn off ViewState for most of the page and enable only a few key controls that might need it. For me personally, this is a perfect combination as most of my WebForm apps can get away without any ViewState at all. But some controls - especially third party controls - often don’t work well without ViewState enabled, and now it’s much easier to selectively enable controls rather than the old way, which required you to pretty much turn off ViewState for all controls that you didn’t want ViewState on. Inline HTML Encoding HTML encoding is an important feature to prevent cross-site scripting attacks in data entered by users on your site. In order to make it easier to create HTML encoded content, ASP.NET 4.0 introduces a new Expression syntax using <%: %> to encode string values. The encoding expression syntax looks like this: <%: "<script type='text/javascript'>" + "alert('Really?');</script>" %> which produces properly encoded HTML: <script type='text/javascript' >alert('Really?');</script> Effectively this is a shortcut to: <%= HttpUtility.HtmlEncode( "<script type='text/javascript'>" + "alert('Really?');</script>") %> Of course the <%: %> syntax can also evaluate expressions just like <%= %> so the more common scenario applies this expression syntax against data your application is displaying. Here’s an example displaying some data model values: <%: Model.Address.Street %> This snippet shows displaying data from your application’s data store or more importantly, from data entered by users. Anything that makes it easier and less verbose to HtmlEncode text is a welcome addition to avoid potential cross-site scripting attacks. Although I listed Inline HTML Encoding here under WebForms, anything that uses the WebForms rendering engine including ASP.NET MVC, benefits from this feature. ScriptManager Enhancements The ASP.NET ScriptManager control in the past has introduced some nice ways to take programmatic and markup control over script loading, but there were a number of shortcomings in this control. The ASP.NET 4.0 ScriptManager has a number of improvements that make it easier to control script loading and addresses a few of the shortcomings that have often kept me from using the control in favor of manual script loading. The first is the AjaxFrameworkMode property which finally lets you suppress loading the ASP.NET AJAX runtime. Disabled doesn’t load any ASP.NET AJAX libraries, but there’s also an Explicit mode that lets you pick and choose the library pieces individually and reduce the footprint of ASP.NET AJAX script included if you are using the library. There’s also a new EnableCdn property that forces any script that has a new WebResource attribute CdnPath property set to a CDN supplied URL. If the script has this Attribute property set to a non-null/empty value and EnableCdn is enabled on the ScriptManager, that script will be served from the specified CdnPath. [assembly: WebResource( "Westwind.Web.Resources.ww.jquery.js", "application/x-javascript", CdnPath = "http://mysite.com/scripts/ww.jquery.min.js")] Cool, but a little too static for my taste since this value can’t be changed at runtime to point at a debug script as needed, for example. Assembly names for loading scripts from resources can now be simple names rather than fully qualified assembly names, which make it less verbose to reference scripts from assemblies loaded from your bin folder or the assembly reference area in web.config: <asp:ScriptManager runat="server" id="Id" EnableCdn="true" AjaxFrameworkMode="disabled"> <Scripts> <asp:ScriptReference Name="Westwind.Web.Resources.ww.jquery.js" Assembly="Westwind.Web" /> </Scripts> </asp:ScriptManager> The ScriptManager in 4.0 also supports script combining via the CompositeScript tag, which allows you to very easily combine scripts into a single script resource served via ASP.NET. Even nicer: You can specify the URL that the combined script is served with. Check out the following script manager markup that combines several static file scripts and a script resource into a single ASP.NET served resource from a static URL (allscripts.js): <asp:ScriptManager runat="server" id="Id" EnableCdn="true" AjaxFrameworkMode="disabled"> <CompositeScript Path="~/scripts/allscripts.js"> <Scripts> <asp:ScriptReference Path="~/scripts/jquery.js" /> <asp:ScriptReference Path="~/scripts/ww.jquery.js" /> <asp:ScriptReference Name="Westwind.Web.Resources.editors.js" Assembly="Westwind.Web" /> </Scripts> </CompositeScript> </asp:ScriptManager> When you render this into HTML, you’ll see a single script reference in the page: <script src="scripts/allscripts.debug.js" type="text/javascript"></script> All you need to do to make this work is ensure that allscripts.js and allscripts.debug.js exist in the scripts folder of your application - they can be empty but the file has to be there. This is pretty cool, but you want to be real careful that you use unique URLs for each combination of scripts you combine or else browser and server caching will easily screw you up royally. The script manager also allows you to override native ASP.NET AJAX scripts now as any script references defined in the Scripts section of the ScriptManager trump internal references. So if you want custom behavior or you want to fix a possible bug in the core libraries that normally are loaded from resources, you can now do this simply by referencing the script resource name in the Name property and pointing at System.Web for the assembly. Not a common scenario, but when you need it, it can come in real handy. Still, there are a number of shortcomings in this control. For one, the ScriptManager and ClientScript APIs still have no common entry point so control developers are still faced with having to check and support both APIs to load scripts so that controls can work on pages that do or don’t have a ScriptManager on the page. The CdnUrl is static and compiled in, which is very restrictive. And finally, there’s still no control over where scripts get loaded on the page - ScriptManager still injects scripts into the middle of the HTML markup rather than in the header or optionally the footer. This, in turn, means there is little control over script loading order, which can be problematic for control developers. MetaDescription, MetaKeywords Page Properties There are also a number of additional Page properties that correspond to some of the other features discussed in this column: ClientIDMode, ClientTarget and ViewStateMode. Another minor but useful feature is that you can now directly access the MetaDescription and MetaKeywords properties on the Page object to set the corresponding meta tags programmatically. Updating these values programmatically previously required either <%= %> expressions in the page markup or dynamic insertion of literal controls into the page. You can now just set these properties programmatically on the Page object in any Control derived class on the page or the Page itself: Page.MetaKeywords = "ASP.NET,4.0,New Features"; Page.MetaDescription = "This article discusses the new features in ASP.NET 4.0"; Note, that there’s no corresponding ASP.NET tag for the HTML Meta element, so the only way to specify these values in markup and access them is via the @Page tag: <%@Page Language="C#" CodeBehind="WebForm2.aspx.cs" Inherits="Westwind.WebStore.WebForm2" ClientIDMode="Static" MetaDescription="Article that discusses what's new in ASP.NET 4.0" MetaKeywords="ASP.NET,4.0,New Features" %> Nothing earth shattering but quite convenient. Visual Studio 2010 Enhancements for Web Development For Web development there are also a host of editor enhancements in Visual Studio 2010. Some of these are not Web specific but they are useful for Web developers in general. Text Editors Throughout Visual Studio 2010, the text editors have all been updated to a new core engine based on WPF which provides some interesting new features for various code editors including the nice ability to zoom in and out with Ctrl-MouseWheel to quickly change the size of text. There are many more API options to control the editor and although Visual Studio 2010 doesn’t yet use many of these features, we can look forward to enhancements in add-ins and future editor updates from the various language teams that take advantage of the visual richness that WPF provides to editing. On the negative side, I’ve noticed that occasionally the code editor and especially the HTML and JavaScript editors will lose the ability to use various navigation keys like arrows, back and delete keys, which requires closing and reopening the documents at times. This issue seems to be well documented so I suspect this will be addressed soon with a hotfix or within the first service pack. Overall though, the code editors work very well, especially given that they were re-written completely using WPF, which was one of my big worries when I first heard about the complete redesign of the editors. Multi-Targeting Visual Studio now targets all versions of the .NET framework from 2.0 forward. You can use Visual Studio 2010 to work on your ASP.NET 2, 3.0 and 3.5 applications which is a nice way to get your feet wet with the new development environment without having to make changes to existing applications. It’s nice to have one tool to work in for all the different versions. Multi-Monitor Support One cool feature of Visual Studio 2010 is the ability to drag windows out of the Visual Studio environment and out onto the desktop including onto another monitor easily. Since Web development often involves working with a host of designers at the same time - visual designer, HTML markup window, code behind and JavaScript editor - it’s really nice to be able to have a little more screen real estate to work on each of these editors. Microsoft made a welcome change in the environment. IntelliSense Snippets for HTML and JavaScript Editors The HTML and JavaScript editors now finally support IntelliSense scripts to create macro-based template expansions that have been in the core C# and Visual Basic code editors since Visual Studio 2005. Snippets allow you to create short XML-based template definitions that can act as static macros or real templates that can have replaceable values that can be embedded into the expanded text. The XML syntax for these snippets is straight forward and it’s pretty easy to create custom snippets manually. You can easily create snippets using XML and store them in your custom snippets folder (C:\Users\rstrahl\Documents\Visual Studio 2010\Code Snippets\Visual Web Developer\My HTML Snippets and My JScript Snippets), but it helps to use one of the third-party tools that exist to simplify the process for you. I use SnippetEditor, by Bill McCarthy, which makes short work of creating snippets interactively (http://snippeteditor.codeplex.com/). Note: You may have to manually add the Visual Studio 2010 User specific Snippet folders to this tool to see existing ones you’ve created. Code snippets are some of the biggest time savers and HTML editing more than anything deals with lots of repetitive tasks that lend themselves to text expansion. Visual Studio 2010 includes a slew of built-in snippets (that you can also customize!) and you can create your own very easily. If you haven’t done so already, I encourage you to spend a little time examining your coding patterns and find the repetitive code that you write and convert it into snippets. I’ve been using CodeRush for this for years, but now you can do much of the basic expansion natively for HTML and JavaScript snippets. jQuery Integration Is Now Native jQuery is a popular JavaScript library and recently Microsoft has recently stated that it will become the primary client-side scripting technology to drive higher level script functionality in various ASP.NET Web projects that Microsoft provides. In Visual Studio 2010, the default full project template includes jQuery as part of a new project including the support files that provide IntelliSense (-vsdoc files). IntelliSense support for jQuery is now also baked into Visual Studio 2010, so unlike Visual Studio 2008 which required a separate download, no further installs are required for a rich IntelliSense experience with jQuery. Summary ASP.NET 4.0 brings many useful improvements to the platform, but thankfully most of the changes are incremental changes that don’t compromise backwards compatibility and they allow developers to ease into the new features one feature at a time. None of the changes in ASP.NET 4.0 or Visual Studio 2010 are monumental or game changers. The bigger features are language and .NET Framework changes that are also optional. This ASP.NET and tools release feels more like fine tuning and getting some long-standing kinks worked out of the platform. It shows that the ASP.NET team is dedicated to paying attention to community feedback and responding with changes to the platform and development environment based on this feedback. If you haven’t gotten your feet wet with ASP.NET 4.0 and Visual Studio 2010, there’s no reason not to give it a shot now - the ASP.NET 4.0 platform is solid and Visual Studio 2010 works very well for a brand new release. Check it out. © Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET

Read the article

Windows Azure: Import/Export Hard Drives, VM ACLs, Web Sockets, Remote Debugging, Continuous Delivery, New Relic, Billing Alerts and More

- by ScottGu

Two weeks ago we released a giant set of improvements to Windows Azure, as well as a significant update of the Windows Azure SDK. This morning we released another massive set of enhancements to Windows Azure. Today’s new capabilities include: Storage: Import/Export Hard Disk Drives to your Storage Accounts HDInsight: General Availability of our Hadoop Service in the cloud Virtual Machines: New VM Gallery, ACL support for VIPs Web Sites: WebSocket and Remote Debugging Support Notification Hubs: Segmented customer push notification support with tag expressions TFS & GIT: Continuous Delivery Support for Web Sites + Cloud Services Developer Analytics: New Relic support for Web Sites + Mobile Services Service Bus: Support for partitioned queues and topics Billing: New Billing Alert Service that sends emails notifications when your bill hits a threshold you define All of these improvements are now available to use immediately (note that some features are still in preview). Below are more details about them. Storage: Import/Export Hard Disk Drives to Windows Azure I am excited to announce the preview of our new Windows Azure Import/Export Service! The Windows Azure Import/Export Service enables you to move large amounts of on-premises data into and out of your Windows Azure Storage accounts. It does this by enabling you to securely ship hard disk drives directly to our Windows Azure data centers. Once we receive the drives we’ll automatically transfer the data to or from your Windows Azure Storage account. This enables you to import or export massive amounts of data more quickly and cost effectively (and not be constrained by available network bandwidth). Encrypted Transport Our Import/Export service provides built-in support for BitLocker disk encryption – which enables you to securely encrypt data on the hard drives before you send it, and not have to worry about it being compromised even if the disk is lost/stolen in transit (since the content on the transported hard drives is completely encrypted and you are the only one who has the key to it). The drive preparation tool we are shipping today makes setting up bitlocker encryption on these hard drives easy. How to Import/Export your first Hard Drive of Data You can read our Getting Started Guide to learn more about how to begin using the import/export service. You can create import and export jobs via the Windows Azure Management Portal as well as programmatically using our Server Management APIs. It is really easy to create a new import or export job using the Windows Azure Management Portal. Simply navigate to a Windows Azure storage account, and then click the new Import/Export tab now available within it (note: if you don’t have this tab make sure to sign-up for the Import/Export preview): Then click the “Create Import Job” or “Create Export Job” commands at the bottom of it. This will launch a wizard that easily walks you through the steps required: For more comprehensive information about Import/Export, refer to Windows Azure Storage team blog. You can also send questions and comments to the [email protected] email address. We think you’ll find this new service makes it much easier to move data into and out of Windows Azure, and it will dramatically cut down the network bandwidth required when working on large data migration projects. We hope you like it. HDInsight: 100% Compatible Hadoop Service in the Cloud Last week we announced the general availability release of Windows Azure HDInsight. HDInsight is a 100% compatible Hadoop service that allows you to easily provision and manage Hadoop clusters for big data processing in Windows Azure. This release is now live in production, backed by an enterprise SLA, supported 24x7 by Microsoft Support, and is ready to use for production scenarios. HDInsight allows you to use Apache Hadoop tools, such as Pig and Hive, to process large amounts of data in Windows Azure Blob Storage. Because data is stored in Windows Azure Blob Storage, you can choose to dynamically create Hadoop clusters only when you need them, and then shut them down when they are no longer required (since you pay only for the time the Hadoop cluster instances are running this provides a super cost effective way to use them). You can create Hadoop clusters using either the Windows Azure Management Portal (see below) or using our PowerShell and Cross Platform Command line tools: The import/export hard drive support that came out today is a perfect companion service to use with HDInsight – the combination allows you to easily ingest, process and optionally export a limitless amount of data. We’ve also integrated HDInsight with our Business Intelligence tools, so users can leverage familiar tools like Excel in order to analyze the output of jobs. You can find out more about how to get started with HDInsight here. Virtual Machines: VM Gallery Enhancements Today’s update of Windows Azure brings with it a new Virtual Machine gallery that you can use to create new VMs in the cloud. You can launch the gallery by doing New->Compute->Virtual Machine->From Gallery within the Windows Azure Management Portal: The new Virtual Machine Gallery includes some nice enhancements that make it even easier to use: Search: You can now easily search and filter images using the search box in the top-right of the dialog. For example, simply type “SQL” and we’ll filter to show those images in the gallery that contain that substring. Category Tree-view: Each month we add more built-in VM images to the gallery. You can continue to browse these using the “All” view within the VM Gallery – or now quickly filter them using the category tree-view on the left-hand side of the dialog. For example, by selecting “Oracle” in the tree-view you can now quickly filter to see the official Oracle supplied images. MSDN and Supported checkboxes: With today’s update we are also introducing filters that makes it easy to filter out types of images that you may not be interested in. The first checkbox is MSDN: using this filter you can exclude any image that is not part of the Windows Azure benefits for MSDN subscribers (which have highly discounted pricing - you can learn more about the MSDN pricing here). The second checkbox is Supported: this filter will exclude any image that contains prerelease software, so you can feel confident that the software you choose to deploy is fully supported by Windows Azure and our partners. Sort options: We sort gallery images by what we think customers are most interested in, but sometimes you might want to sort using different views. So we’re providing some additional sort options, like “Newest,” to customize the image list for what suits you best. Pricing information: We now provide additional pricing information about images and options on how to cost effectively run them directly within the VM Gallery. The above improvements make it even easier to use the VM Gallery and quickly create launch and run Virtual Machines in the cloud. Virtual Machines: ACL Support for VIPs A few months ago we exposed the ability to configure Access Control Lists (ACLs) for Virtual Machines using Windows PowerShell cmdlets and our Service Management API. With today’s release, you can now configure VM ACLs using the Windows Azure Management Portal as well. You can now do this by clicking the new Manage ACL command in the Endpoints tab of a virtual machine instance: This will enable you to configure an ordered list of permit and deny rules to scope the traffic that can access your VM’s network endpoints. For example, if you were on a virtual network, you could limit RDP access to a Windows Azure virtual machine to only a few computers attached to your enterprise. Or if you weren’t on a virtual network you could alternatively limit traffic from public IPs that can access your workloads: Here is the default behaviors for ACLs in Windows Azure: By default (i.e. no rules specified), all traffic is permitted. When using only Permit rules, all other traffic is denied. When using only Deny rules, all other traffic is permitted. When there is a combination of Permit and Deny rules, all other traffic is denied. Lastly, remember that configuring endpoints does not automatically configure them within the VM if it also has firewall rules enabled at the OS level. So if you create an endpoint using the Windows Azure Management Portal, Windows PowerShell, or REST API, be sure to also configure your guest VM firewall appropriately as well. Web Sites: Web Sockets Support With today’s release you can now use Web Sockets with Windows Azure Web Sites. This feature enables you to easily integrate real-time communication scenarios within your web based applications, and is available at no extra charge (it even works with the free tier). Higher level programming libraries like SignalR and socket.io are also now supported with it. You can enable Web Sockets support on a web site by navigating to the Configure tab of a Web Site, and by toggling Web Sockets support to “on”: Once Web Sockets is enabled you can start to integrate some really cool scenarios into your web applications. Check out the new SignalR documentation hub on www.asp.net to learn more about some of the awesome scenarios you can do with it. Web Sites: Remote Debugging Support The Windows Azure SDK 2.2 we released two weeks ago introduced remote debugging support for Windows Azure Cloud Services. With today’s Windows Azure release we are extending this remote debugging support to also work with Windows Azure Web Sites. With live, remote debugging support inside of Visual Studio, you are able to have more visibility than ever before into how your code is operating live in Windows Azure. It is now super easy to attach the debugger and quickly see what is going on with your application in the cloud. Remote Debugging of a Windows Azure Web Site using VS 2013 Enabling the remote debugging of a Windows Azure Web Site using VS 2013 is really easy. Start by opening up your web application’s project within Visual Studio. Then navigate to the “Server Explorer” tab within Visual Studio, and click on the deployed web-site you want to debug that is running within Windows Azure using the Windows Azure->Web Sites node in the Server Explorer. Then right-click and choose the “Attach Debugger” option on it: When you do this Visual Studio will remotely attach the debugger to the Web Site running within Windows Azure. The debugger will then stop the web site’s execution when it hits any break points that you have set within your web application’s project inside Visual Studio. For example, below I set a breakpoint on the “ViewBag.Message” assignment statement within the HomeController of the standard ASP.NET MVC project template. When I hit refresh on the “About” page of the web site within the browser, the breakpoint was triggered and I am now able to debug the app remotely using Visual Studio: Note above how we can debug variables (including autos/watchlist/etc), as well as use the Immediate and Command Windows. In the debug session above I used the Immediate Window to explore some of the request object state, as well as to dynamically change the ViewBag.Message property. When we click the the “Continue” button (or press F5) the app will continue execution and the Web Site will render the content back to the browser. This makes it super easy to debug web apps remotely. Tips for Better Debugging To get the best experience while debugging, we recommend publishing your site using the Debug configuration within Visual Studio’s Web Publish dialog. This will ensure that debug symbol information is uploaded to the Web Site which will enable a richer debug experience within Visual Studio. You can find this option on the Web Publish dialog on the Settings tab: When you ultimately deploy/run the application in production we recommend using the “Release” configuration setting – the release configuration is memory optimized and will provide the best production performance. To learn more about diagnosing and debugging Windows Azure Web Sites read our new Troubleshooting Windows Azure Web Sites in Visual Studio guide. Notification Hubs: Segmented Push Notification support with tag expressions In August we announced the General Availability of Windows Azure Notification Hubs - a powerful Mobile Push Notifications service that makes it easy to send high volume push notifications with low latency from any mobile app back-end. Notification hubs can be used with any mobile app back-end (including ones built using our Mobile Services capability) and can also be used with back-ends that run in the cloud as well as on-premises. Beginning with the initial release, Notification Hubs allowed developers to send personalized push notifications to both individual users as well as groups of users by interest, by associating their devices with tags representing the logical target of the notification. For example, by registering all devices of customers interested in a favorite MLB team with a corresponding tag, it is possible to broadcast one message to millions of Boston Red Sox fans and another message to millions of St. Louis Cardinals fans with a single API call respectively. New support for using tag expressions to enable advanced customer segmentation With today’s release we are adding support for even more advanced customer targeting. You can now identify customers that you want to send push notifications to by defining rich tag expressions. With tag expressions, you can now not only broadcast notifications to Boston Red Sox fans, but take that segmenting a step farther and reach more granular segments. This opens up a variety of scenarios, for example: Offers based on multiple preferences—e.g. send a game day vegetarian special to users tagged as both a Boston Red Sox fan AND a vegetarian Push content to multiple segments in a single message—e.g. rain delay information only to users who are tagged as either a Boston Red Sox fan OR a St. Louis Cardinal fan Avoid presenting subsets of a segment with irrelevant content—e.g. season ticket availability reminder to users who are tagged as a Boston Red Sox fan but NOT also a season ticket holder To illustrate with code, consider a restaurant chain app that sends an offer related to a Red Sox vs Cardinals game for users in Boston. Devices can be tagged by your app with location tags (e.g. “Loc:Boston”) and interest tags (e.g. “Follows:RedSox”, “Follows:Cardinals”), and then a notification can be sent by your back-end to “(Follows:RedSox || Follows:Cardinals) && Loc:Boston” in order to deliver an offer to all devices in Boston that follow either the RedSox or the Cardinals. This can be done directly in your server backend send logic using the code below: var notification = new WindowsNotification(messagePayload); hub.SendNotificationAsync(notification, "(Follows:RedSox || Follows:Cardinals) && Loc:Boston"); In your expressions you can use all Boolean operators: AND (&&), OR (||), and NOT (!). Some other cool use cases for tag expressions that are now supported include: Social: To “all my group except me” - group:id && !user:id Events: Touchdown event is sent to everybody following either team or any of the players involved in the action: Followteam:A || Followteam:B || followplayer:1 || followplayer:2 … Hours: Send notifications at specific times. E.g. Tag devices with time zone and when it is 12pm in Seattle send to: GMT8 && follows:thaifood Versions and platforms: Send a reminder to people still using your first version for Android - version:1.0 && platform:Android For help on getting started with Notification Hubs, visit the Notification Hub documentation center. Then download the latest NuGet package (or use the Notification Hubs REST APIs directly) to start sending push notifications using tag expressions. They are really powerful and enable a bunch of great new scenarios. TFS & GIT: Continuous Delivery Support for Web Sites + Cloud Services With today’s Windows Azure release we are making it really easy to enable continuous delivery support with Windows Azure and Team Foundation Services. Team Foundation Services is a cloud based offering from Microsoft that provides integrated source control (with both TFS and Git support), build server, test execution, collaboration tools, and agile planning support. It makes it really easy to setup a team project (complete with automated builds and test runners) in the cloud, and it has really rich integration with Visual Studio. With today’s Windows Azure release it is now really easy to enable continuous delivery support with both TFS and Git based repositories hosted using Team Foundation Services. This enables a workflow where when code is checked in, built successfully on an automated build server, and all tests pass on it – I can automatically have the app deployed on Windows Azure with zero manual intervention or work required. The below screen-shots demonstrate how to quickly setup a continuous delivery workflow to Windows Azure with a Git-based ASP.NET MVC project hosted using Team Foundation Services. Enabling Continuous Delivery to Windows Azure with Team Foundation Services The project I’m going to enable continuous delivery with is a simple ASP.NET MVC project whose source code I’m hosting using Team Foundation Services. I did this by creating a “SimpleContinuousDeploymentTest” repository there using Git – and then used the new built-in Git tooling support within Visual Studio 2013 to push the source code to it. Below is a screen-shot of the Git repository hosted within Team Foundation Services: I can access the repository within Visual Studio 2013 and easily make commits with it (as well as branch, merge and do other tasks). Using VS 2013 I can also setup automated builds to take place in the cloud using Team Foundation Services every time someone checks in code to the repository: The cool thing about this is that I don’t have to buy or rent my own build server – Team Foundation Services automatically maintains its own build server farm and can automatically queue up a build for me (for free) every time someone checks in code using the above settings. This build server (and automated testing) support now works with both TFS and Git based source control repositories. Connecting a Team Foundation Services project to Windows Azure Once I have a source repository hosted in Team Foundation Services with Automated Builds and Testing set up, I can then go even further and set it up so that it will be automatically deployed to Windows Azure when a source code commit is made to the repository (assuming the Build + Tests pass). Enabling this is now really easy. To set this up with a Windows Azure Web Site simply use the New->Compute->Web Site->Custom Create command inside the Windows Azure Management Portal. This will create a dialog like below. I gave the web site a name and then made sure the “Publish from source control” checkbox was selected: When we click next we’ll be prompted for the location of the source repository. We’ll select “Team Foundation Services”: Once we do this we’ll be prompted for our Team Foundation Services account that our source repository is hosted under (in this case my TFS account is “scottguthrie”): When we click the “Authorize Now” button we’ll be prompted to give Windows Azure permissions to connect to the Team Foundation Services account. Once we do this we’ll be prompted to pick the source repository we want to connect to. Starting with today’s Windows Azure release you can now connect to both TFS and Git based source repositories. This new support allows me to connect to the “SimpleContinuousDeploymentTest” respository we created earlier: Clicking the finish button will then create the Web Site with the continuous delivery hooks setup with Team Foundation Services. Now every time someone pushes source control to the repository in Team Foundation Services, it will kick off an automated build, run all of the unit tests in the solution , and if they pass the app will be automatically deployed to our Web Site in Windows Azure. You can monitor the history and status of these automated deployments using the Deployments tab within the Web Site: This enables a really slick continuous delivery workflow, and enables you to build and deploy apps in a really nice way. Developer Analytics: New Relic support for Web Sites + Mobile Services With today’s Windows Azure release we are making it really easy to enable Developer Analytics and Monitoring support with both Windows Azure Web Site and Windows Azure Mobile Services. We are partnering with New Relic, who provide a great dev analytics and app performance monitoring offering, to enable this - and we have updated the Windows Azure Management Portal to make it really easy to configure. Enabling New Relic with a Windows Azure Web Site Enabling New Relic support with a Windows Azure Web Site is now really easy. Simply navigate to the Configure tab of a Web Site and scroll down to the “developer analytics” section that is now within it: Clicking the “add-on” button will display some additional UI. If you don’t already have a New Relic subscription, you can click the “view windows azure store” button to obtain a subscription (note: New Relic has a perpetually free tier so you can enable it even without paying anything): Clicking the “view windows azure store” button will launch the integrated Windows Azure Store experience we have within the Windows Azure Management Portal. You can use this to browse from a variety of great add-on services – including New Relic: Select “New Relic” within the dialog above, then click the next button, and you’ll be able to choose which type of New Relic subscription you wish to purchase. For this demo we’ll simply select the “Free Standard Version” – which does not cost anything and can be used forever: Once we’ve signed-up for our New Relic subscription and added it to our Windows Azure account, we can go back to the Web Site’s configuration tab and choose to use the New Relic add-on with our Windows Azure Web Site. We can do this by simply selecting it from the “add-on” dropdown (it is automatically populated within it once we have a New Relic subscription in our account): Clicking the “Save” button will then cause the Windows Azure Management Portal to automatically populate all of the needed New Relic configuration settings to our Web Site: Deploying the New Relic Agent as part of a Web Site The final step to enable developer analytics using New Relic is to add the New Relic runtime agent to our web app. We can do this within Visual Studio by right-clicking on our web project and selecting the “Manage NuGet Packages” context menu: This will bring up the NuGet package manager. You can search for “New Relic” within it to find the New Relic agent. Note that there is both a 32-bit and 64-bit edition of it – make sure to install the version that matches how your Web Site is running within Windows Azure (note: you can configure your Web Site to run in either 32-bit or 64-bit mode using the Web Site’s “Configuration” tab within the Windows Azure Management Portal): Once we install the NuGet package we are all set to go. We’ll simply re-publish the web site again to Windows Azure and New Relic will now automatically start monitoring the application Monitoring a Web Site using New Relic Now that the application has developer analytics support with New Relic enabled, we can launch the New Relic monitoring portal to start monitoring the health of it. We can do this by clicking on the “Add Ons” tab in the left-hand side of the Windows Azure Management Portal. Then select the New Relic add-on we signed-up for within it. The Windows Azure Management Portal will provide some default information about the add-on when we do this. Clicking the “Manage” button in the tray at the bottom will launch a new browser tab and single-sign us into the New Relic monitoring portal associated with our account: When we do this a new browser tab will launch with the New Relic admin tool loaded within it: We can now see insights into how our app is performing – without having to have written a single line of monitoring code. The New Relic service provides a ton of great built-in monitoring features allowing us to quickly see: Performance times (including browser rendering speed) for the overall site and individual pages. You can optionally set alert thresholds to trigger if the speed does not meet a threshold you specify. Information about where in the world your customers are hitting the site from (and how performance varies by region) Details on the latency performance of external services your web apps are using (for example: SQL, Storage, Twitter, etc) Error information including call stack details for exceptions that have occurred at runtime SQL Server profiling information – including which queries executed against your database and what their performance was And a whole bunch more… The cool thing about New Relic is that you don’t need to write monitoring code within your application to get all of the above reports (plus a lot more). The New Relic agent automatically enables the CLR profiler within applications and automatically captures the information necessary to identify these. This makes it super easy to get started and immediately have a rich developer analytics view for your solutions with very little effort. If you haven’t tried New Relic out yet with Windows Azure I recommend you do so – I think you’ll find it helps you build even better cloud applications. Following the above steps will help you get started and deliver you a really good application monitoring solution in only minutes. Service Bus: Support for partitioned queues and topics With today’s release, we are enabling support within Service Bus for partitioned queues and topics. Enabling partitioning enables you to achieve a higher message throughput and better availability from your queues and topics. Higher message throughput is achieved by implementing multiple message brokers for each partitioned queue and topic. The multiple messaging stores will also provide higher availability. You can create a partitioned queue or topic by simply checking the Enable Partitioning option in the custom create wizard for a Queue or Topic: Read this article to learn more about partitioned queues and topics and how to take advantage of them today. Billing: New Billing Alert Service Today’s Windows Azure update enables a new Billing Alert Service Preview that enables you to get proactive email notifications when your Windows Azure bill goes above a certain monetary threshold that you configure. This makes it easier to manage your bill and avoid potential surprises at the end of the month. With the Billing Alert Service Preview, you can now create email alerts to monitor and manage your monetary credits or your current bill total. To set up an alert first sign-up for the free Billing Alert Service Preview. Then visit the account management page, click on a subscription you have setup, and then navigate to the new Alerts tab that is available: The alerts tab allows you to setup email alerts that will be sent automatically once a certain threshold is hit. For example, by clicking the “add alert” button above I can setup a rule to send myself email anytime my Windows Azure bill goes above $100 for the month: The Billing Alert Service will evolve to support additional aspects of your bill as well as support multiple forms of alerts such as SMS. Try out the new Billing Alert Service Preview today and give us feedback. Summary Today’s Windows Azure release enables a ton of great new scenarios, and makes building applications hosted in the cloud even easier. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today. Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

CodePlex Daily Summary for Saturday, August 09, 2014

CodePlex Daily Summary for Saturday, August 09, 2014Popular ReleasesSEToolbox: SEToolbox 01.042.019 Release 1: Added RadioAntenna broadcast name to ship name detail. Added two additional columns for Asteroid material generation for Asteroid Fields. Added Mass and Block number columns to main display. Added Ellipsis to some columns on main display to reduce name confusion. Added correct SE version number in file when saving. Re-added in reattaching Motor when drag/dropping or importing ships (KeenSH have added RotorEntityId back in after removing it months ago). Added option to export and r...QuickDAL: Initial Public Build: We recommend simply forking the source into your project. But you can use this DLL and PDB (debug symbols) if you'd rather not add clutter to your solution.N-Tier Entity Framework: N-Tier Entity Framework - 1.5 Beta 2: This is a pre-release version. Contents: N-Tier Entity Framework (VS2010).1.5.0-beta002.vsix N-Tier Entity Framework (VS2012).1.5.0-beta002.vsix N-Tier Entity Framework (VS2013).1.5.0-beta002.vsixThe Freemwork - An open game framework in C# .NET: v0.2 - Vortigaunt: Added space partitionning support Added depth support on CompositeSpriteHolder Added multiple components Added camera strategies Added extensions and math methods Added another constructor to Identity2D Updated Tools.TuplesFromT64 to support multiple layers of tiles Updated Identity2D.GlobalTransform property : now returns the screen position, regardless of Identity2D.DependsOnCamera Fixed Rectangle.Transform method Fixed sprite depth support Fixed wrong mathematic functions Multiple bugfixesLanMngmtXL: LanMngmtXL-1.0.61: This release includes binary files for 64 bit OS, source code and manual. Changes- host arp tables loaded - if more than 1 million rows then data saved to several excel tabs Quick How-To (using binary file)Follow these steps to use the software. Check included documentation for more details: Unpack ZIP file Download aditional tools for retrieving configurations like Plink (save to C:\Putty\plink.exe) or WVT (read documentation) Create a device list to get configurations (ex. devices.txt...Remote Linq: Demo - RemoteQueryableToEntityFramework: Demo application to show dynamic queries (joins, aggregations, groupings, projections, etc.) over WCF using EF on server sideTransMock: TransMock 0.9.1 (Beta): Minor fixes of the assembly name with the BizUnit steps Updated the name of the isntaller to indicate that it is for BizTalk server 2010. Tested and working with BizTalk 2013 as well, though assemblies are compiled for .NET 4.0.SharePoint 2013 Lync Presence using jQuery: jQuery Lync Presence: I have fixed the same user multiple times on page issue in this release (Issue # 1506)Dynamics AX IEIDE Project Explorer: IEIDE.1.1.40803.1: Installing the project: 1. Install the ax model file; do this by running the following commands on the machine having the AX Management Tools: 1.a. cmd (depending if you have UAC enabled, you may want to Run as administrator); 1.b. net stop aos60$01 (wait until you have your AOS stopped); 1.c. cd "c:\Program Files\Microsoft Dynamics AX\60\ManagementUtili ties\" 1.d. axutil import /file:c:\IEIDE.1.1.40806.1.axmodel /verbose 1.e. net start aos60$01 1.f. start the client and select Skip 2. Per...Facebook Graph Toolkit: Facebook Graph Toolkit 5.1: Updated to 100 Graph Api endpoint mappings with 258 object propertiesJSLint.NET: JSLint.NET 1.6.4: Bugs: #38: MSBuild task support for linked settings file. #40: Explicitly typed imports / exports required in some Visual Studio environments.Instant Beautiful Browsing: IBB 14.3 Alpha: An alpha release of IBB. After 3 years of the last release this version is made from scratch, with tons of new features like: Make your own IBB aps. HTML 5. Better UI. Extreme Windows 8 resemblance. Photos. Store. Movement TONS of times smother compared to previous versions. Remember that this is AN ALPHA release, I hope I will have "IBB 14" finished by December. The documentation on how to create a new application for IBB will come next monthjQuery List DragSort: jQuery List DragSort 0.5.2: Fixed scrollContainer removing deprecated use of $.browser so should now work with latest version of jQuery. Added the ability to return false in dragEnd to revert sort order Project changes Added nuget package for dragsort https://www.nuget.org/packages/dragsort Converted repository from SVN to MercurialLexisnexis directory of corporate affiliates Text Analyzer: Lexisnexis Text Analyzer: This version has functions below.Standards to analyze, columns, keywords editing Import of document Export to CSV and Microsoft Excel fileWix# (WixSharp) - managed interface for WiX: Release 1.0.0.0: Release 1.0.0.0 Custom UI Custom MSI Dialog Custom CLR Dialog External UIRecaptcha for .NET: Recaptcha for .NET v1.6.0: What's New?Bug fixes Optimized codeMath.NET Numerics: Math.NET Numerics v3.2.0: Linear Algebra: Vector.Map2 (map2 in F#), storage-optimized Linear Algebra: fix RemoveColumn/Row early index bound check (was not strict enough) Statistics: Entropy ~Jeff Mastry Interpolation: use Array.BinarySearch instead of local implementation ~Candy Chiu Resources: fix a corrupted exception message string Portable Build: support .Net 4.0 as well by using profile 328 instead of 344. .Net 3.5: F# extensions now support .Net 3.5 as well .Net 3.5: NuGet package now contains pro...Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.11: Virto Commerce Community Edition version 1.11. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes many bug fixes and minor improvements. More details about this release can be found on our blog at http://blog.virtocommerce.com.Json.NET: Json.NET 6.0 Release 4: New feature - Added Merge to LINQ to JSON New feature - Added JValue.CreateNull and JValue.CreateUndefined New feature - Added Windows Phone 8.1 support to .NET 4.0 portable assembly New feature - Added OverrideCreator to JsonObjectContract New feature - Added support for overriding the creation of interfaces and abstract types New feature - Added support for reading UUID BSON binary values as a Guid New feature - Added MetadataPropertyHandling.Ignore New feature - Improv...VidCoder: 1.5.24 Beta: Added NL-Means denoiser. Updated HandBrake core to SVN 6254. Added extra error handling to DVD player code to avoid a crash when the player was moved.New Projects2113110030: ten: pham van long mon: oop 2113110282: Mon: OPP Ten: Tran Thanh Danh2113110294: Mon: OOP Ten: Vo Ngoc Thai Lop:CCQ1311LAarena: TESTSTSTBowling Game: Program that makes you the follow-up to a game of bowling scoresCTP API for .NET: Comprehensive Trading Platform Application Programming Interface for the .NET Framework CTP API Version: V6.3.0Dashboard Chart Exporter for Microsoft Dynamics CRM 2013: Tool to export Dashboard Charts as Image files in Microsoft Dynamics CRM 2013MergeHosts: A python script to merge hosts file together for those enjoying a clean browsing experienceMFCBDAINF: BDA DTV topology information applicationNetFlux Tunneler Client: This client is a simple Tunneler that creates a TCP connection to the server and sends a custom designed header (originally to bypass firewalls) to the server.NetFlux Tunneler Server: This server is a simple Tunneler that accepts a TCP connection from the client and forwards it to another address, intercepting the custom header. oDesk .NET Library: oDesk .NET Portable Library developed by Andrew SorochakOooPlayer: Lightweight music player that supports mp3, aac, ogg, opus, flac, alac, ape, mpc, tta, wv, wma, ac3OOP-2113110292: class :OOP Name : Nguyen Minh TanOOP-2113110299: Mon: OOP Ten: Nguyen Minh Xuan Lop: CCQ1311LA Truong: Cao dang Cong Thuong - Tp. Ho Chi MinhSFML Tower Defence: SFML Tower defence game that was meant to demonstrate the principals taught in the NWU Potchefstroom EERI 314 course. The game is created using SFML and C++.The Happy Birthday Dad Project: A happy birthday message for my dad???????: ???????QQ:2281595668，?????，????，????　　????????????????，?????????????????????，?????????????????????????!???????????????????????????????????????????????、??????????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ???????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，?????????????????: ?????????????: ????????????: ????????????: ???????????: ???????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ??????QQ：2281595668，?????，????，????。????????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,???????: ???????QQ：2281595668，?????，????，????。????????????????，?????????????????????，?????????????????????????!???????????????????????????????????????????????、?????????、??????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、????????: ??????????: ??????????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ?????????????: ????????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ???????QQ：2281595668，?????，????，????。????????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，???????: ????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ??????QQ：2281595668，?????，????，????。???????????????，??????????????????????????，????????????!??????????????????????????????????????????、???????、????、??????、??????????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ：2281595668，?????，????，????。????????????????????，??????????????，????，?????????????????????，??????。????????，??????????????????????。????????，????????????，?????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ???????????: 5454??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ???????????: ????? QQ:2281595668，?????，????，????。????? ??????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ??????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ????? QQ:2281595668，?????，????，????。????? ?????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，???????????????: ???????????: ?????QQ:2281595668，?????，????，????　　???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，?????????????????: jhfiwegb?????: ???????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，??????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，????????????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，??????????????????????????????: ???????????: ???????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ???????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,????????????????????: ?????????????: ????????????: ??????QQ：2281595668，?????，????，????。??????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???? ?????，?????????????: ???????????: ???????????: ????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，?????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，?????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ????????????: ????????????: ???????????: ??????????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ??????????: ??????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ??????????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ??????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ????????????: ???????????: ?????????????: ??????????????: ??????QQ：2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，???????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ:2281595668，?????，????，????　　??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，???????????????????????????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ????? QQ:2281595668，?????，????，????。????? ????????????，????????。????????????????、???????。??????????????。????? ???????????,??????,??????,??????,??????????????，????????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ????????????????: ?????????????????: ?????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ???????????: ???????????: ??????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ????? QQ：2281595668，?????，????，????。?????????? ???????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ???????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ???????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，???????: ?????????????: ???????????: ??????????: ??????????: ????????????: ??????????????: ????????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ????????????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????　　??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ????????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ??????QQ：2281595668，?????，????，????。???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ???????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ????????????: ????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: xtbjza??????: ??????QQ：2281595668，?????，????，????。???????????????，??????????????????????????，????????????!??????????????????????????????????????????、???????、????、??????、????????????: ???????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,????????: ?????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ????? QQ:2281595668，?????，????，????。????? ??????????????，??????????????，????，?????????????????????，??????。????? ??，??????????????????????。????????，????????????，??????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ????????????: ??????QQ：2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，?????????: ????????????: ?????QQ:2281595668??????: ???????????: ????? QQ：2281595668，?????，????，????。????? ????????????，????????。????????????????、???????。??????????????。????? ???????????,??????,??????,??????,??????????????，????????: ????????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????????: ??????????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????: ??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，???????????: ?????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????，?????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ??????????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????: ????????????: ??????????????: ????????QQ:2281595668，?????，????，????　　??????????????????????，??1998?7??????，??????????，?????????，?????????????，?????????????????????????. ????????????????????，??????: ??????QQ：2281595668，?????，????，????。???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ??????????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，????????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ?????????????: ?????????????: ???????????: ????? QQ：2281595668，?????，????，????。????? ???????????????????，????????????，????? ?98???????????，????，??????????，?????????. 　　?????????,????????????????，??????????????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，?????????: ????????????: ???????????: ??????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: 　?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，???????????????????????????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，????????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”??????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，??????: ?????????????: ????????????????: ????????????????: ?????????????: ????????????: ???????QQ:2281595668，?????，????，????　　???????????????????，????????????，????????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，???????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ?????????????: ???????QQ:2281595668，?????，????，????　　???????????????????，????????????，????????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ????????????：　　?????：??????、??、??、????、????(??、??、????)???、???????、?????、?????????????????(???、??、???、??、???); 　　?????：???、?????、???、?????(??、??、??、???)、?????(??????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ???????????: ????????????: ????????????: ?????????????: ???????QQ:2281595668，?????，????，????　　????????????????????????????,????????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;?????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ?????????????: ?????????????: ?????????????: ???????QQ：2281595668，?????，????，????。　　????????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，????????????????: ?????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????，?????: ???????????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、?????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，???????: ???????QQ：2281595668，?????，????，????。???????????，??????????????????。?????? ?????，????????????????，????????????。????，?????????????，????，??“??????”???? ?????，?????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、????????????????: ???????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，?????????????，????，??“??????”???????: ???????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ????????????: ?????????????: ??????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、????????: ?????????????: ????????????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ????????????: ???????QQ：2281595668，?????，????，????。???????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，??????????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ??????QQ：2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，???????: ????? QQ：2281595668，?????，????，????。????? ????????????，????????。????????????????、???????。??????????????。????? ???????????,??????,??????,??????,??????????????，???????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ??????QQ：2281595668，?????，????，????。????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ???????????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ???????????: ?????????????: ???????

Read the article

How John Got 15x Improvement Without Really Trying

- by rchrd

The following article was published on a Sun Microsystems website a number of years ago by John Feo. It is still useful and worth preserving. So I'm republishing it here. How I Got 15x Improvement Without Really Trying John Feo, Sun Microsystems Taking ten "personal" program codes used in scientific and engineering research, the author was able to get from 2 to 15 times performance improvement easily by applying some simple general optimization techniques. Introduction Scientific research based on computer simulation depends on the simulation for advancement. The research can advance only as fast as the computational codes can execute. The codes' efficiency determines both the rate and quality of results. In the same amount of time, a faster program can generate more results and can carry out a more detailed simulation of physical phenomena than a slower program. Highly optimized programs help science advance quickly and insure that monies supporting scientific research are used as effectively as possible. Scientific computer codes divide into three broad categories: ISV, community, and personal. ISV codes are large, mature production codes developed and sold commercially. The codes improve slowly over time both in methods and capabilities, and they are well tuned for most vendor platforms. Since the codes are mature and complex, there are few opportunities to improve their performance solely through code optimization. Improvements of 10% to 15% are typical. Examples of ISV codes are DYNA3D, Gaussian, and Nastran. Community codes are non-commercial production codes used by a particular research field. Generally, they are developed and distributed by a single academic or research institution with assistance from the community. Most users just run the codes, but some develop new methods and extensions that feed back into the general release. The codes are available on most vendor platforms. Since these codes are younger than ISV codes, there are more opportunities to optimize the source code. Improvements of 50% are not unusual. Examples of community codes are AMBER, CHARM, BLAST, and FASTA. Personal codes are those written by single users or small research groups for their own use. These codes are not distributed, but may be passed from professor-to-student or student-to-student over several years. They form the primordial ocean of applications from which community and ISV codes emerge. Government research grants pay for the development of most personal codes. This paper reports on the nature and performance of this class of codes. Over the last year, I have looked at over two dozen personal codes from more than a dozen research institutions. The codes cover a variety of scientific fields, including astronomy, atmospheric sciences, bioinformatics, biology, chemistry, geology, and physics. The sources range from a few hundred lines to more than ten thousand lines, and are written in Fortran, Fortran 90, C, and C++. For the most part, the codes are modular, documented, and written in a clear, straightforward manner. They do not use complex language features, advanced data structures, programming tricks, or libraries. I had little trouble understanding what the codes did or how data structures were used. Most came with a makefile. Surprisingly, only one of the applications is parallel. All developers have access to parallel machines, so availability is not an issue. Several tried to parallelize their applications, but stopped after encountering difficulties. Lack of education and a perception that parallelism is difficult prevented most from trying. I parallelized several of the codes using OpenMP, and did not judge any of the codes as difficult to parallelize. Even more surprising than the lack of parallelism is the inefficiency of the codes. I was able to get large improvements in performance in a matter of a few days applying simple optimization techniques. Table 1 lists ten representative codes [names and affiliation are omitted to preserve anonymity]. Improvements on one processor range from 2x to 15.5x with a simple average of 4.75x. I did not use sophisticated performance tools or drill deep into the program's execution character as one would do when tuning ISV or community codes. Using only a profiler and source line timers, I identified inefficient sections of code and improved their performance by inspection. The changes were at a high level. I am sure there is another factor of 2 or 3 in each code, and more if the codes are parallelized. The study’s results show that personal scientific codes are running many times slower than they should and that the problem is pervasive. Computational scientists are not sloppy programmers; however, few are trained in the art of computer programming or code optimization. I found that most have a working knowledge of some programming language and standard software engineering practices; but they do not know, or think about, how to make their programs run faster. They simply do not know the standard techniques used to make codes run faster. In fact, they do not even perceive that such techniques exist. The case studies described in this paper show that applying simple, well known techniques can significantly increase the performance of personal codes. It is important that the scientific community and the Government agencies that support scientific research find ways to better educate academic scientific programmers. The inefficiency of their codes is so bad that it is retarding both the quality and progress of scientific research. # cacheperformance redundantoperations loopstructures performanceimprovement 1 x x 15.5 2 x 2.8 3 x x 2.5 4 x 2.1 5 x x 2.0 6 x 5.0 7 x 5.8 8 x 6.3 9 2.2 10 x x 3.3 Table 1 — Area of improvement and performance gains of 10 codes The remainder of the paper is organized as follows: sections 2, 3, and 4 discuss the three most common sources of inefficiencies in the codes studied. These are cache performance, redundant operations, and loop structures. Each section includes several examples. The last section summaries the work and suggests a possible solution to the issues raised. Optimizing cache performance Commodity microprocessor systems use caches to increase memory bandwidth and reduce memory latencies. Typical latencies from processor to L1, L2, local, and remote memory are 3, 10, 50, and 200 cycles, respectively. Moreover, bandwidth falls off dramatically as memory distances increase. Programs that do not use cache effectively run many times slower than programs that do. When optimizing for cache, the biggest performance gains are achieved by accessing data in cache order and reusing data to amortize the overhead of cache misses. Secondary considerations are prefetching, associativity, and replacement; however, the understanding and analysis required to optimize for the latter are probably beyond the capabilities of the non-expert. Much can be gained simply by accessing data in the correct order and maximizing data reuse. 6 out of the 10 codes studied here benefited from such high level optimizations. Array Accesses The most important cache optimization is the most basic: accessing Fortran array elements in column order and C array elements in row order. Four of the ten codes—1, 2, 4, and 10—got it wrong. Compilers will restructure nested loops to optimize cache performance, but may not do so if the loop structure is too complex, or the loop body includes conditionals, complex addressing, or function calls. In code 1, the compiler failed to invert a key loop because of complex addressing do I = 0, 1010, delta_x IM = I - delta_x IP = I + delta_x do J = 5, 995, delta_x JM = J - delta_x JP = J + delta_x T1 = CA1(IP, J) + CA1(I, JP) T2 = CA1(IM, J) + CA1(I, JM) S1 = T1 + T2 - 4 * CA1(I, J) CA(I, J) = CA1(I, J) + D * S1 end do end do In code 2, the culprit is conditionals do I = 1, N do J = 1, N If (IFLAG(I,J) .EQ. 0) then T1 = Value(I, J-1) T2 = Value(I-1, J) T3 = Value(I, J) T4 = Value(I+1, J) T5 = Value(I, J+1) Value(I,J) = 0.25 * (T1 + T2 + T5 + T4) Delta = ABS(T3 - Value(I,J)) If (Delta .GT. MaxDelta) MaxDelta = Delta endif enddo enddo I fixed both programs by inverting the loops by hand. Code 10 has three-dimensional arrays and triply nested loops. The structure of the most computationally intensive loops is too complex to invert automatically or by hand. The only practical solution is to transpose the arrays so that the dimension accessed by the innermost loop is in cache order. The arrays can be transposed at construction or prior to entering a computationally intensive section of code. The former requires all array references to be modified, while the latter is cost effective only if the cost of the transpose is amortized over many accesses. I used the second approach to optimize code 10. Code 5 has four-dimensional arrays and loops are nested four deep. For all of the reasons cited above the compiler is not able to restructure three key loops. Assume C arrays and let the four dimensions of the arrays be i, j, k, and l. In the original code, the index structure of the three loops is L1: for i L2: for i L3: for i for l for l for j for k for j for k for j for k for l So only L3 accesses array elements in cache order. L1 is a very complex loop—much too complex to invert. I brought the loop into cache alignment by transposing the second and fourth dimensions of the arrays. Since the code uses a macro to compute all array indexes, I effected the transpose at construction and changed the macro appropriately. The dimensions of the new arrays are now: i, l, k, and j. L3 is a simple loop and easily inverted. L2 has a loop-carried scalar dependence in k. By promoting the scalar name that carries the dependence to an array, I was able to invert the third and fourth subloops aligning the loop with cache. Code 5 is by far the most difficult of the four codes to optimize for array accesses; but the knowledge required to fix the problems is no more than that required for the other codes. I would judge this code at the limits of, but not beyond, the capabilities of appropriately trained computational scientists. Array Strides When a cache miss occurs, a line (64 bytes) rather than just one word is loaded into the cache. If data is accessed stride 1, than the cost of the miss is amortized over 8 words. Any stride other than one reduces the cost savings. Two of the ten codes studied suffered from non-unit strides. The codes represent two important classes of "strided" codes. Code 1 employs a multi-grid algorithm to reduce time to convergence. The grids are every tenth, fifth, second, and unit element. Since time to convergence is inversely proportional to the distance between elements, coarse grids converge quickly providing good starting values for finer grids. The better starting values further reduce the time to convergence. The downside is that grids of every nth element, n > 1, introduce non-unit strides into the computation. In the original code, much of the savings of the multi-grid algorithm were lost due to this problem. I eliminated the problem by compressing (copying) coarse grids into continuous memory, and rewriting the computation as a function of the compressed grid. On convergence, I copied the final values of the compressed grid back to the original grid. The savings gained from unit stride access of the compressed grid more than paid for the cost of copying. Using compressed grids, the loop from code 1 included in the previous section becomes do j = 1, GZ do i = 1, GZ T1 = CA(i+0, j-1) + CA(i-1, j+0) T4 = CA1(i+1, j+0) + CA1(i+0, j+1) S1 = T1 + T4 - 4 * CA1(i+0, j+0) CA(i+0, j+0) = CA1(i+0, j+0) + DD * S1 enddo enddo where CA and CA1 are compressed arrays of size GZ. Code 7 traverses a list of objects selecting objects for later processing. The labels of the selected objects are stored in an array. The selection step has unit stride, but the processing steps have irregular stride. A fix is to save the parameters of the selected objects in temporary arrays as they are selected, and pass the temporary arrays to the processing functions. The fix is practical if the same parameters are used in selection as in processing, or if processing comprises a series of distinct steps which use overlapping subsets of the parameters. Both conditions are true for code 7, so I achieved significant improvement by copying parameters to temporary arrays during selection. Data reuse In the previous sections, we optimized for spatial locality. It is also important to optimize for temporal locality. Once read, a datum should be used as much as possible before it is forced from cache. Loop fusion and loop unrolling are two techniques that increase temporal locality. Unfortunately, both techniques increase register pressure—as loop bodies become larger, the number of registers required to hold temporary values grows. Once register spilling occurs, any gains evaporate quickly. For multiprocessors with small register sets or small caches, the sweet spot can be very small. In the ten codes presented here, I found no opportunities for loop fusion and only two opportunities for loop unrolling (codes 1 and 3). In code 1, unrolling the outer and inner loop one iteration increases the number of result values computed by the loop body from 1 to 4, do J = 1, GZ-2, 2 do I = 1, GZ-2, 2 T1 = CA1(i+0, j-1) + CA1(i-1, j+0) T2 = CA1(i+1, j-1) + CA1(i+0, j+0) T3 = CA1(i+0, j+0) + CA1(i-1, j+1) T4 = CA1(i+1, j+0) + CA1(i+0, j+1) T5 = CA1(i+2, j+0) + CA1(i+1, j+1) T6 = CA1(i+1, j+1) + CA1(i+0, j+2) T7 = CA1(i+2, j+1) + CA1(i+1, j+2) S1 = T1 + T4 - 4 * CA1(i+0, j+0) S2 = T2 + T5 - 4 * CA1(i+1, j+0) S3 = T3 + T6 - 4 * CA1(i+0, j+1) S4 = T4 + T7 - 4 * CA1(i+1, j+1) CA(i+0, j+0) = CA1(i+0, j+0) + DD * S1 CA(i+1, j+0) = CA1(i+1, j+0) + DD * S2 CA(i+0, j+1) = CA1(i+0, j+1) + DD * S3 CA(i+1, j+1) = CA1(i+1, j+1) + DD * S4 enddo enddo The loop body executes 12 reads, whereas as the rolled loop shown in the previous section executes 20 reads to compute the same four values. In code 3, two loops are unrolled 8 times and one loop is unrolled 4 times. Here is the before for (k = 0; k < NK[u]; k++) { sum = 0.0; for (y = 0; y < NY; y++) { sum += W[y][u][k] * delta[y]; } backprop[i++]=sum; } and after code for (k = 0; k < KK - 8; k+=8) { sum0 = 0.0; sum1 = 0.0; sum2 = 0.0; sum3 = 0.0; sum4 = 0.0; sum5 = 0.0; sum6 = 0.0; sum7 = 0.0; for (y = 0; y < NY; y++) { sum0 += W[y][0][k+0] * delta[y]; sum1 += W[y][0][k+1] * delta[y]; sum2 += W[y][0][k+2] * delta[y]; sum3 += W[y][0][k+3] * delta[y]; sum4 += W[y][0][k+4] * delta[y]; sum5 += W[y][0][k+5] * delta[y]; sum6 += W[y][0][k+6] * delta[y]; sum7 += W[y][0][k+7] * delta[y]; } backprop[k+0] = sum0; backprop[k+1] = sum1; backprop[k+2] = sum2; backprop[k+3] = sum3; backprop[k+4] = sum4; backprop[k+5] = sum5; backprop[k+6] = sum6; backprop[k+7] = sum7; } for one of the loops unrolled 8 times. Optimizing for temporal locality is the most difficult optimization considered in this paper. The concepts are not difficult, but the sweet spot is small. Identifying where the program can benefit from loop unrolling or loop fusion is not trivial. Moreover, it takes some effort to get it right. Still, educating scientific programmers about temporal locality and teaching them how to optimize for it will pay dividends. Reducing instruction count Execution time is a function of instruction count. Reduce the count and you usually reduce the time. The best solution is to use a more efficient algorithm; that is, an algorithm whose order of complexity is smaller, that converges quicker, or is more accurate. Optimizing source code without changing the algorithm yields smaller, but still significant, gains. This paper considers only the latter because the intent is to study how much better codes can run if written by programmers schooled in basic code optimization techniques. The ten codes studied benefited from three types of "instruction reducing" optimizations. The two most prevalent were hoisting invariant memory and data operations out of inner loops. The third was eliminating unnecessary data copying. The nature of these inefficiencies is language dependent. Memory operations The semantics of C make it difficult for the compiler to determine all the invariant memory operations in a loop. The problem is particularly acute for loops in functions since the compiler may not know the values of the function's parameters at every call site when compiling the function. Most compilers support pragmas to help resolve ambiguities; however, these pragmas are not comprehensive and there is no standard syntax. To guarantee that invariant memory operations are not executed repetitively, the user has little choice but to hoist the operations by hand. The problem is not as severe in Fortran programs because in the absence of equivalence statements, it is a violation of the language's semantics for two names to share memory. Codes 3 and 5 are C programs. In both cases, the compiler did not hoist all invariant memory operations from inner loops. Consider the following loop from code 3 for (y = 0; y < NY; y++) { i = 0; for (u = 0; u < NU; u++) { for (k = 0; k < NK[u]; k++) { dW[y][u][k] += delta[y] * I1[i++]; } } } Since dW[y][u] can point to the same memory space as delta for one or more values of y and u, assignment to dW[y][u][k] may change the value of delta[y]. In reality, dW and delta do not overlap in memory, so I rewrote the loop as for (y = 0; y < NY; y++) { i = 0; Dy = delta[y]; for (u = 0; u < NU; u++) { for (k = 0; k < NK[u]; k++) { dW[y][u][k] += Dy * I1[i++]; } } } Failure to hoist invariant memory operations may be due to complex address calculations. If the compiler can not determine that the address calculation is invariant, then it can hoist neither the calculation nor the associated memory operations. As noted above, code 5 uses a macro to address four-dimensional arrays #define MAT4D(a,q,i,j,k) (double *)((a)->data + (q)*(a)->strides[0] + (i)*(a)->strides[3] + (j)*(a)->strides[2] + (k)*(a)->strides[1]) The macro is too complex for the compiler to understand and so, it does not identify any subexpressions as loop invariant. The simplest way to eliminate the address calculation from the innermost loop (over i) is to define a0 = MAT4D(a,q,0,j,k) before the loop and then replace all instances of *MAT4D(a,q,i,j,k) in the loop with a0[i] A similar problem appears in code 6, a Fortran program. The key loop in this program is do n1 = 1, nh nx1 = (n1 - 1) / nz + 1 nz1 = n1 - nz * (nx1 - 1) do n2 = 1, nh nx2 = (n2 - 1) / nz + 1 nz2 = n2 - nz * (nx2 - 1) ndx = nx2 - nx1 ndy = nz2 - nz1 gxx = grn(1,ndx,ndy) gyy = grn(2,ndx,ndy) gxy = grn(3,ndx,ndy) balance(n1,1) = balance(n1,1) + (force(n2,1) * gxx + force(n2,2) * gxy) * h1 balance(n1,2) = balance(n1,2) + (force(n2,1) * gxy + force(n2,2) * gyy)*h1 end do end do The programmer has written this loop well—there are no loop invariant operations with respect to n1 and n2. However, the loop resides within an iterative loop over time and the index calculations are independent with respect to time. Trading space for time, I precomputed the index values prior to the entering the time loop and stored the values in two arrays. I then replaced the index calculations with reads of the arrays. Data operations Ways to reduce data operations can appear in many forms. Implementing a more efficient algorithm produces the biggest gains. The closest I came to an algorithm change was in code 4. This code computes the inner product of K-vectors A(i) and B(j), 0 = i < N, 0 = j < M, for most values of i and j. Since the program computes most of the NM possible inner products, it is more efficient to compute all the inner products in one triply-nested loop rather than one at a time when needed. The savings accrue from reading A(i) once for all B(j) vectors and from loop unrolling. for (i = 0; i < N; i+=8) { for (j = 0; j < M; j++) { sum0 = 0.0; sum1 = 0.0; sum2 = 0.0; sum3 = 0.0; sum4 = 0.0; sum5 = 0.0; sum6 = 0.0; sum7 = 0.0; for (k = 0; k < K; k++) { sum0 += A[i+0][k] * B[j][k]; sum1 += A[i+1][k] * B[j][k]; sum2 += A[i+2][k] * B[j][k]; sum3 += A[i+3][k] * B[j][k]; sum4 += A[i+4][k] * B[j][k]; sum5 += A[i+5][k] * B[j][k]; sum6 += A[i+6][k] * B[j][k]; sum7 += A[i+7][k] * B[j][k]; } C[i+0][j] = sum0; C[i+1][j] = sum1; C[i+2][j] = sum2; C[i+3][j] = sum3; C[i+4][j] = sum4; C[i+5][j] = sum5; C[i+6][j] = sum6; C[i+7][j] = sum7; }} This change requires knowledge of a typical run; i.e., that most inner products are computed. The reasons for the change, however, derive from basic optimization concepts. It is the type of change easily made at development time by a knowledgeable programmer. In code 5, we have the data version of the index optimization in code 6. Here a very expensive computation is a function of the loop indices and so cannot be hoisted out of the loop; however, the computation is invariant with respect to an outer iterative loop over time. We can compute its value for each iteration of the computation loop prior to entering the time loop and save the values in an array. The increase in memory required to store the values is small in comparison to the large savings in time. The main loop in Code 8 is doubly nested. The inner loop includes a series of guarded computations; some are a function of the inner loop index but not the outer loop index while others are a function of the outer loop index but not the inner loop index for (j = 0; j < N; j++) { for (i = 0; i < M; i++) { r = i * hrmax; R = A[j]; temp = (PRM[3] == 0.0) ? 1.0 : pow(r, PRM[3]); high = temp * kcoeff * B[j] * PRM[2] * PRM[4]; low = high * PRM[6] * PRM[6] / (1.0 + pow(PRM[4] * PRM[6], 2.0)); kap = (R > PRM[6]) ? high * R * R / (1.0 + pow(PRM[4]*r, 2.0) : low * pow(R/PRM[6], PRM[5]); < rest of loop omitted > }} Note that the value of temp is invariant to j. Thus, we can hoist the computation for temp out of the loop and save its values in an array. for (i = 0; i < M; i++) { r = i * hrmax; TEMP[i] = pow(r, PRM[3]); } [N.B. – the case for PRM[3] = 0 is omitted and will be reintroduced later.] We now hoist out of the inner loop the computations invariant to i. Since the conditional guarding the value of kap is invariant to i, it behooves us to hoist the computation out of the inner loop, thereby executing the guard once rather than M times. The final version of the code is for (j = 0; j < N; j++) { R = rig[j] / 1000.; tmp1 = kcoeff * par[2] * beta[j] * par[4]; tmp2 = 1.0 + (par[4] * par[4] * par[6] * par[6]); tmp3 = 1.0 + (par[4] * par[4] * R * R); tmp4 = par[6] * par[6] / tmp2; tmp5 = R * R / tmp3; tmp6 = pow(R / par[6], par[5]); if ((par[3] == 0.0) && (R > par[6])) { for (i = 1; i <= imax1; i++) KAP[i] = tmp1 * tmp5; } else if ((par[3] == 0.0) && (R <= par[6])) { for (i = 1; i <= imax1; i++) KAP[i] = tmp1 * tmp4 * tmp6; } else if ((par[3] != 0.0) && (R > par[6])) { for (i = 1; i <= imax1; i++) KAP[i] = tmp1 * TEMP[i] * tmp5; } else if ((par[3] != 0.0) && (R <= par[6])) { for (i = 1; i <= imax1; i++) KAP[i] = tmp1 * TEMP[i] * tmp4 * tmp6; } for (i = 0; i < M; i++) { kap = KAP[i]; r = i * hrmax; < rest of loop omitted > } } Maybe not the prettiest piece of code, but certainly much more efficient than the original loop, Copy operations Several programs unnecessarily copy data from one data structure to another. This problem occurs in both Fortran and C programs, although it manifests itself differently in the two languages. Code 1 declares two arrays—one for old values and one for new values. At the end of each iteration, the array of new values is copied to the array of old values to reset the data structures for the next iteration. This problem occurs in Fortran programs not included in this study and in both Fortran 77 and Fortran 90 code. Introducing pointers to the arrays and swapping pointer values is an obvious way to eliminate the copying; but pointers is not a feature that many Fortran programmers know well or are comfortable using. An easy solution not involving pointers is to extend the dimension of the value array by 1 and use the last dimension to differentiate between arrays at different times. For example, if the data space is N x N, declare the array (N, N, 2). Then store the problem’s initial values in (_, _, 2) and define the scalar names new = 2 and old = 1. At the start of each iteration, swap old and new to reset the arrays. The old–new copy problem did not appear in any C program. In programs that had new and old values, the code swapped pointers to reset data structures. Where unnecessary coping did occur is in structure assignment and parameter passing. Structures in C are handled much like scalars. Assignment causes the data space of the right-hand name to be copied to the data space of the left-hand name. Similarly, when a structure is passed to a function, the data space of the actual parameter is copied to the data space of the formal parameter. If the structure is large and the assignment or function call is in an inner loop, then copying costs can grow quite large. While none of the ten programs considered here manifested this problem, it did occur in programs not included in the study. A simple fix is always to refer to structures via pointers. Optimizing loop structures Since scientific programs spend almost all their time in loops, efficient loops are the key to good performance. Conditionals, function calls, little instruction level parallelism, and large numbers of temporary values make it difficult for the compiler to generate tightly packed, highly efficient code. Conditionals and function calls introduce jumps that disrupt code flow. Users should eliminate or isolate conditionls to their own loops as much as possible. Often logical expressions can be substituted for if-then-else statements. For example, code 2 includes the following snippet MaxDelta = 0.0 do J = 1, N do I = 1, M < code omitted > Delta = abs(OldValue ? NewValue) if (Delta > MaxDelta) MaxDelta = Delta enddo enddo if (MaxDelta .gt. 0.001) goto 200 Since the only use of MaxDelta is to control the jump to 200 and all that matters is whether or not it is greater than 0.001, I made MaxDelta a boolean and rewrote the snippet as MaxDelta = .false. do J = 1, N do I = 1, M < code omitted > Delta = abs(OldValue ? NewValue) MaxDelta = MaxDelta .or. (Delta .gt. 0.001) enddo enddo if (MaxDelta) goto 200 thereby, eliminating the conditional expression from the inner loop. A microprocessor can execute many instructions per instruction cycle. Typically, it can execute one or more memory, floating point, integer, and jump operations. To be executed simultaneously, the operations must be independent. Thick loops tend to have more instruction level parallelism than thin loops. Moreover, they reduce memory traffice by maximizing data reuse. Loop unrolling and loop fusion are two techniques to increase the size of loop bodies. Several of the codes studied benefitted from loop unrolling, but none benefitted from loop fusion. This observation is not too surpising since it is the general tendency of programmers to write thick loops. As loops become thicker, the number of temporary values grows, increasing register pressure. If registers spill, then memory traffic increases and code flow is disrupted. A thick loop with many temporary values may execute slower than an equivalent series of thin loops. The biggest gain will be achieved if the thick loop can be split into a series of independent loops eliminating the need to write and read temporary arrays. I found such an occasion in code 10 where I split the loop do i = 1, n do j = 1, m A24(j,i)= S24(j,i) * T24(j,i) + S25(j,i) * U25(j,i) B24(j,i)= S24(j,i) * T25(j,i) + S25(j,i) * U24(j,i) A25(j,i)= S24(j,i) * C24(j,i) + S25(j,i) * V24(j,i) B25(j,i)= S24(j,i) * U25(j,i) + S25(j,i) * V25(j,i) C24(j,i)= S26(j,i) * T26(j,i) + S27(j,i) * U26(j,i) D24(j,i)= S26(j,i) * T27(j,i) + S27(j,i) * V26(j,i) C25(j,i)= S27(j,i) * S28(j,i) + S26(j,i) * U28(j,i) D25(j,i)= S27(j,i) * T28(j,i) + S26(j,i) * V28(j,i) end do end do into two disjoint loops do i = 1, n do j = 1, m A24(j,i)= S24(j,i) * T24(j,i) + S25(j,i) * U25(j,i) B24(j,i)= S24(j,i) * T25(j,i) + S25(j,i) * U24(j,i) A25(j,i)= S24(j,i) * C24(j,i) + S25(j,i) * V24(j,i) B25(j,i)= S24(j,i) * U25(j,i) + S25(j,i) * V25(j,i) end do end do do i = 1, n do j = 1, m C24(j,i)= S26(j,i) * T26(j,i) + S27(j,i) * U26(j,i) D24(j,i)= S26(j,i) * T27(j,i) + S27(j,i) * V26(j,i) C25(j,i)= S27(j,i) * S28(j,i) + S26(j,i) * U28(j,i) D25(j,i)= S27(j,i) * T28(j,i) + S26(j,i) * V28(j,i) end do end do Conclusions Over the course of the last year, I have had the opportunity to work with over two dozen academic scientific programmers at leading research universities. Their research interests span a broad range of scientific fields. Except for two programs that relied almost exclusively on library routines (matrix multiply and fast Fourier transform), I was able to improve significantly the single processor performance of all codes. Improvements range from 2x to 15.5x with a simple average of 4.75x. Changes to the source code were at a very high level. I did not use sophisticated techniques or programming tools to discover inefficiencies or effect the changes. Only one code was parallel despite the availability of parallel systems to all developers. Clearly, we have a problem—personal scientific research codes are highly inefficient and not running parallel. The developers are unaware of simple optimization techniques to make programs run faster. They lack education in the art of code optimization and parallel programming. I do not believe we can fix the problem by publishing additional books or training manuals. To date, the developers in questions have not studied the books or manual available, and are unlikely to do so in the future. Short courses are a possible solution, but I believe they are too concentrated to be much use. The general concepts can be taught in a three or four day course, but that is not enough time for students to practice what they learn and acquire the experience to apply and extend the concepts to their codes. Practice is the key to becoming proficient at optimization. I recommend that graduate students be required to take a semester length course in optimization and parallel programming. We would never give someone access to state-of-the-art scientific equipment costing hundreds of thousands of dollars without first requiring them to demonstrate that they know how to use the equipment. Yet the criterion for time on state-of-the-art supercomputers is at most an interesting project. Requestors are never asked to demonstrate that they know how to use the system, or can use the system effectively. A semester course would teach them the required skills. Government agencies that fund academic scientific research pay for most of the computer systems supporting scientific research as well as the development of most personal scientific codes. These agencies should require graduate schools to offer a course in optimization and parallel programming as a requirement for funding. About the Author John Feo received his Ph.D. in Computer Science from The University of Texas at Austin in 1986. After graduate school, Dr. Feo worked at Lawrence Livermore National Laboratory where he was the Group Leader of the Computer Research Group and principal investigator of the Sisal Language Project. In 1997, Dr. Feo joined Tera Computer Company where he was project manager for the MTA, and oversaw the programming and evaluation of the MTA at the San Diego Supercomputer Center. In 2000, Dr. Feo joined Sun Microsystems as an HPC application specialist. He works with university research groups to optimize and parallelize scientific codes. Dr. Feo has published over two dozen research articles in the areas of parallel parallel programming, parallel programming languages, and application performance.

Read the article

Building applications with WCF - Intro

- by skjagini

I am going to write series of articles using Windows Communication Framework (WCF) to develop client and server applications and this is the first part of that series. What is WCF As Juwal puts in his Programming WCF book, WCF provides an SDK for developing and deploying services on Windows, provides runtime environment to expose CLR types as services and consume services as CLR types. Building services with WCF is incredibly easy and it’s implementation provides a set of industry standards and off the shelf plumbing including service hosting, instance management, reliability, transaction management, security etc such that it greatly increases productivity Scenario: Lets consider a typical bank customer trying to create an account, deposit amount and transfer funds between accounts, i.e. checking and savings. To make it interesting, we are going to divide the functionality into multiple services and each of them working with database directly. We will run test cases with and without transactional support across services. In this post we will build contracts, services, data access layer, unit tests to verify end to end communication etc, nothing big stuff here and we dig into other features of the WCF in subsequent posts with incremental changes. In any distributed architecture we have two pieces i.e. services and clients. Services as the name implies provide functionality to execute various pieces of business logic on the server, and clients providing interaction to the end user. Services can be built with Web Services or with WCF. Service built on WCF have the advantage of binding independent, i.e. can run against TCP and HTTP protocol without any significant changes to the code. Solution Services Profile: For creating a new bank customer, getting details about existing customer ProfileContract ProfileService Checking Account: To get checking account balance, deposit or withdraw amount CheckingAccountContract CheckingAccountService Savings Account: To get savings account balance, deposit or withdraw amount SavingsAccountContract SavingsAccountService ServiceHost: To host services, i.e. running the services at particular address, binding and contract where client can connect to Client: Helps end user to use services like creating account and amount transfer between the accounts BankDAL: Data access layer to work with database BankDAL It’s no brainer not to use an ORM as many matured products are available currently in market including Linq2Sql, Entity Framework (EF), LLblGenPro etc. For this exercise I am going to use Entity Framework 4.0, CTP 5 with code first approach. There are two approaches when working with data, data driven and code driven. In data driven we start by designing tables and their constrains in database and generate entities in code while in code driven (code first) approach entities are defined in code and the metadata generated from the entities is used by the EF to create tables and table constrains. In previous versions the entity classes had to derive from EF specific base classes. In EF 4 it is not required to derive from any EF classes, the entities are not only persistence ignorant but also enable full test driven development using mock frameworks. Application consists of 3 entities, Customer entity which contains Customer details; CheckingAccount and SavingsAccount to hold the respective account balance. We could have introduced an Account base class for CheckingAccount and SavingsAccount which is certainly possible with EF mappings but to keep it simple we are just going to follow 1 –1 mapping between entity and table mappings. Lets start out by defining a class called Customer which will be mapped to Customer table, observe that the class is simply a plain old clr object (POCO) and has no reference to EF at all. using System; namespace BankDAL.Model { public class Customer { public int Id { get; set; } public string FullName { get; set; } public string Address { get; set; } public DateTime DateOfBirth { get; set; } } } In order to inform EF about the Customer entity we have to define a database context with properties of type DbSet<> for every POCO which needs to be mapped to a table in database. EF uses convention over configuration to generate the metadata resulting in much less configuration. using System.Data.Entity; namespace BankDAL.Model { public class BankDbContext: DbContext { public DbSet<Customer> Customers { get; set; } } } Entity constrains can be defined through attributes on Customer class or using fluent syntax (no need to muscle with xml files), CustomerConfiguration class. By defining constrains in a separate class we can maintain clean POCOs without corrupting entity classes with database specific information. using System; using System.Data.Entity.ModelConfiguration; namespace BankDAL.Model { public class CustomerConfiguration: EntityTypeConfiguration<Customer> { public CustomerConfiguration() { Initialize(); } private void Initialize() { //Setting the Primary Key this.HasKey(e => e.Id); //Setting required fields this.HasRequired(e => e.FullName); this.HasRequired(e => e.Address); //Todo: Can't create required constraint as DateOfBirth is not reference type, research it //this.HasRequired(e => e.DateOfBirth); } } } Any queries executed against Customers property in BankDbContext are executed against Cusomers table. By convention EF looks for connection string with key of BankDbContext when working with the context. We are going to define a helper class to work with Customer entity with methods for querying, adding new entity etc and these are known as repository classes, i.e., CustomerRepository using System; using System.Data.Entity; using System.Linq; using BankDAL.Model; namespace BankDAL.Repositories { public class CustomerRepository { private readonly IDbSet<Customer> _customers; public CustomerRepository(BankDbContext bankDbContext) { if (bankDbContext == null) throw new ArgumentNullException(); _customers = bankDbContext.Customers; } public IQueryable<Customer> Query() { return _customers; } public void Add(Customer customer) { _customers.Add(customer); } } } From the above code it is observable that the Query methods returns customers as IQueryable i.e. customers are retrieved only when actually used i.e. iterated. Returning as IQueryable also allows to execute filtering and joining statements from business logic using lamba expressions without cluttering the data access layer with tens of methods. Our CheckingAccountRepository and SavingsAccountRepository look very similar to each other using System; using System.Data.Entity; using System.Linq; using BankDAL.Model; namespace BankDAL.Repositories { public class CheckingAccountRepository { private readonly IDbSet<CheckingAccount> _checkingAccounts; public CheckingAccountRepository(BankDbContext bankDbContext) { if (bankDbContext == null) throw new ArgumentNullException(); _checkingAccounts = bankDbContext.CheckingAccounts; } public IQueryable<CheckingAccount> Query() { return _checkingAccounts; } public void Add(CheckingAccount account) { _checkingAccounts.Add(account); } public IQueryable<CheckingAccount> GetAccount(int customerId) { return (from act in _checkingAccounts where act.CustomerId == customerId select act); } } } The repository classes look very similar to each other for Query and Add methods, with the help of C# generics and implementing repository pattern (Martin Fowler) we can reduce the repeated code. Jarod from ElegantCode has posted an article on how to use repository pattern with EF which we will implement in the subsequent articles along with WCF Unity life time managers by Drew Contracts It is very easy to follow contract first approach with WCF, define the interface and append ServiceContract, OperationContract attributes. IProfile contract exposes functionality for creating customer and getting customer details. using System; using System.ServiceModel; using BankDAL.Model; namespace ProfileContract { [ServiceContract] public interface IProfile { [OperationContract] Customer CreateCustomer(string customerName, string address, DateTime dateOfBirth); [OperationContract] Customer GetCustomer(int id); } } ICheckingAccount contract exposes functionality for working with checking account, i.e., getting balance, deposit and withdraw of amount. ISavingsAccount contract looks the same as checking account. using System.ServiceModel; namespace CheckingAccountContract { [ServiceContract] public interface ICheckingAccount { [OperationContract] decimal? GetCheckingAccountBalance(int customerId); [OperationContract] void DepositAmount(int customerId,decimal amount); [OperationContract] void WithdrawAmount(int customerId, decimal amount); } } Services Having covered the data access layer and contracts so far and here comes the core of the business logic, i.e. services. .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } ProfileService implements the IProfile contract for creating customer and getting customer detail using CustomerRepository. using System; using System.Linq; using System.ServiceModel; using BankDAL; using BankDAL.Model; using BankDAL.Repositories; using ProfileContract; namespace ProfileService { [ServiceBehavior(IncludeExceptionDetailInFaults = true)] public class Profile: IProfile { public Customer CreateAccount( string customerName, string address, DateTime dateOfBirth) { Customer cust = new Customer { FullName = customerName, Address = address, DateOfBirth = dateOfBirth }; using (var bankDbContext = new BankDbContext()) { new CustomerRepository(bankDbContext).Add(cust); bankDbContext.SaveChanges(); } return cust; } public Customer CreateCustomer(string customerName, string address, DateTime dateOfBirth) { return CreateAccount(customerName, address, dateOfBirth); } public Customer GetCustomer(int id) { return new CustomerRepository(new BankDbContext()).Query() .Where(i => i.Id == id).FirstOrDefault(); } } } From the above code you shall observe that we are calling bankDBContext’s SaveChanges method and there is no save method specific to customer entity because EF manages all the changes centralized at the context level and all the pending changes so far are submitted in a batch and it is represented as Unit of Work. Similarly Checking service implements ICheckingAccount contract using CheckingAccountRepository, notice that we are throwing overdraft exception if the balance falls by zero. WCF has it’s own way of raising exceptions using fault contracts which will be explained in the subsequent articles. SavingsAccountService is similar to CheckingAccountService. using System; using System.Linq; using System.ServiceModel; using BankDAL.Model; using BankDAL.Repositories; using CheckingAccountContract; namespace CheckingAccountService { [ServiceBehavior(IncludeExceptionDetailInFaults = true)] public class Checking:ICheckingAccount { public decimal? GetCheckingAccountBalance(int customerId) { using (var bankDbContext = new BankDbContext()) { CheckingAccount account = (new CheckingAccountRepository(bankDbContext) .GetAccount(customerId)).FirstOrDefault(); if (account != null) return account.Balance; return null; } } public void DepositAmount(int customerId, decimal amount) { using(var bankDbContext = new BankDbContext()) { var checkingAccountRepository = new CheckingAccountRepository(bankDbContext); CheckingAccount account = (checkingAccountRepository.GetAccount(customerId)) .FirstOrDefault(); if (account == null) { account = new CheckingAccount() { CustomerId = customerId }; checkingAccountRepository.Add(account); } account.Balance = account.Balance + amount; if (account.Balance < 0) throw new ApplicationException("Overdraft not accepted"); bankDbContext.SaveChanges(); } } public void WithdrawAmount(int customerId, decimal amount) { DepositAmount(customerId, -1*amount); } } } BankServiceHost The host acts as a glue binding contracts with it’s services, exposing the endpoints. The services can be exposed either through the code or configuration file, configuration file is preferred as it allows run time changes to service behavior even after deployment. We have 3 services and for each of the service you need to define name (the class that implements the service with fully qualified namespace) and endpoint known as ABC, i.e. address, binding and contract. We are using netTcpBinding and have defined the base address with for each of the contracts .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } <system.serviceModel> <services> <service name="ProfileService.Profile"> <endpoint binding="netTcpBinding" contract="ProfileContract.IProfile"/> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:1000/Profile"/> </baseAddresses> </host> </service> <service name="CheckingAccountService.Checking"> <endpoint binding="netTcpBinding" contract="CheckingAccountContract.ICheckingAccount"/> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:1000/Checking"/> </baseAddresses> </host> </service> <service name="SavingsAccountService.Savings"> <endpoint binding="netTcpBinding" contract="SavingsAccountContract.ISavingsAccount"/> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:1000/Savings"/> </baseAddresses> </host> </service> </services> </system.serviceModel> Have to open the services by creating service host which will handle the incoming requests from clients. using System; namespace ServiceHost { class Program { static void Main(string[] args) { CreateHosts(); Console.ReadLine(); } private static void CreateHosts() { CreateHost(typeof(ProfileService.Profile),"Profile Service"); CreateHost(typeof(SavingsAccountService.Savings), "Savings Account Service"); CreateHost(typeof(CheckingAccountService.Checking), "Checking Account Service"); } private static void CreateHost(Type type, string hostDescription) { System.ServiceModel.ServiceHost host = new System.ServiceModel.ServiceHost(type); host.Open(); if (host.ChannelDispatchers != null && host.ChannelDispatchers.Count != 0 && host.ChannelDispatchers[0].Listener != null) Console.WriteLine("Started: " + host.ChannelDispatchers[0].Listener.Uri); else Console.WriteLine("Failed to start:" + hostDescription); } } } BankClient The client has no knowledge about service business logic other than the functionality it exposes through the contract, end points and a proxy to work against. The endpoint data and server proxy can be generated by right clicking on the project reference and choosing ‘Add Service Reference’ and entering the service end point address. Or if you have access to source, you can manually reference contract dlls and update clients configuration file to point to the service end point if the server and client happens to be being built using .Net framework. One of the pros with the manual approach is you don’t have to work against messy code generated files. <system.serviceModel> <client> <endpoint name="tcpProfile" address="net.tcp://localhost:1000/Profile" binding="netTcpBinding" contract="ProfileContract.IProfile"/> <endpoint name="tcpCheckingAccount" address="net.tcp://localhost:1000/Checking" binding="netTcpBinding" contract="CheckingAccountContract.ICheckingAccount"/> <endpoint name="tcpSavingsAccount" address="net.tcp://localhost:1000/Savings" binding="netTcpBinding" contract="SavingsAccountContract.ISavingsAccount"/> </client> </system.serviceModel> The client uses a façade to connect to the services using System.ServiceModel; using CheckingAccountContract; using ProfileContract; using SavingsAccountContract; namespace Client { public class ProxyFacade { public static IProfile ProfileProxy() { return (new ChannelFactory<IProfile>("tcpProfile")).CreateChannel(); } public static ICheckingAccount CheckingAccountProxy() { return (new ChannelFactory<ICheckingAccount>("tcpCheckingAccount")) .CreateChannel(); } public static ISavingsAccount SavingsAccountProxy() { return (new ChannelFactory<ISavingsAccount>("tcpSavingsAccount")) .CreateChannel(); } } } With that in place, lets get our unit tests going using System; using System.Diagnostics; using BankDAL.Model; using NUnit.Framework; using ProfileContract; namespace Client { [TestFixture] public class Tests { private void TransferFundsFromSavingsToCheckingAccount(int customerId, decimal amount) { ProxyFacade.CheckingAccountProxy().DepositAmount(customerId, amount); ProxyFacade.SavingsAccountProxy().WithdrawAmount(customerId, amount); } private void TransferFundsFromCheckingToSavingsAccount(int customerId, decimal amount) { ProxyFacade.SavingsAccountProxy().DepositAmount(customerId, amount); ProxyFacade.CheckingAccountProxy().WithdrawAmount(customerId, amount); } [Test] public void CreateAndGetProfileTest() { IProfile profile = ProxyFacade.ProfileProxy(); const string customerName = "Tom"; int customerId = profile.CreateCustomer(customerName, "NJ", new DateTime(1982, 1, 1)).Id; Customer customer = profile.GetCustomer(customerId); Assert.AreEqual(customerName,customer.FullName); } [Test] public void DepositWithDrawAndTransferAmountTest() { IProfile profile = ProxyFacade.ProfileProxy(); string customerName = "Smith" + DateTime.Now.ToString("HH:mm:ss"); var customer = profile.CreateCustomer(customerName, "NJ", new DateTime(1982, 1, 1)); // Deposit to Savings ProxyFacade.SavingsAccountProxy().DepositAmount(customer.Id, 100); ProxyFacade.SavingsAccountProxy().DepositAmount(customer.Id, 25); Assert.AreEqual(125, ProxyFacade.SavingsAccountProxy().GetSavingsAccountBalance(customer.Id)); // Withdraw ProxyFacade.SavingsAccountProxy().WithdrawAmount(customer.Id, 30); Assert.AreEqual(95, ProxyFacade.SavingsAccountProxy().GetSavingsAccountBalance(customer.Id)); // Deposit to Checking ProxyFacade.CheckingAccountProxy().DepositAmount(customer.Id, 60); ProxyFacade.CheckingAccountProxy().DepositAmount(customer.Id, 40); Assert.AreEqual(100, ProxyFacade.CheckingAccountProxy().GetCheckingAccountBalance(customer.Id)); // Withdraw ProxyFacade.CheckingAccountProxy().WithdrawAmount(customer.Id, 30); Assert.AreEqual(70, ProxyFacade.CheckingAccountProxy().GetCheckingAccountBalance(customer.Id)); // Transfer from Savings to Checking TransferFundsFromSavingsToCheckingAccount(customer.Id,10); Assert.AreEqual(85, ProxyFacade.SavingsAccountProxy().GetSavingsAccountBalance(customer.Id)); Assert.AreEqual(80, ProxyFacade.CheckingAccountProxy().GetCheckingAccountBalance(customer.Id)); // Transfer from Checking to Savings TransferFundsFromCheckingToSavingsAccount(customer.Id, 50); Assert.AreEqual(135, ProxyFacade.SavingsAccountProxy().GetSavingsAccountBalance(customer.Id)); Assert.AreEqual(30, ProxyFacade.CheckingAccountProxy().GetCheckingAccountBalance(customer.Id)); } [Test] public void FundTransfersWithOverDraftTest() { IProfile profile = ProxyFacade.ProfileProxy(); string customerName = "Angelina" + DateTime.Now.ToString("HH:mm:ss"); var customerId = profile.CreateCustomer(customerName, "NJ", new DateTime(1972, 1, 1)).Id; ProxyFacade.SavingsAccountProxy().DepositAmount(customerId, 100); TransferFundsFromSavingsToCheckingAccount(customerId,80); Assert.AreEqual(20, ProxyFacade.SavingsAccountProxy().GetSavingsAccountBalance(customerId)); Assert.AreEqual(80, ProxyFacade.CheckingAccountProxy().GetCheckingAccountBalance(customerId)); try { TransferFundsFromSavingsToCheckingAccount(customerId,30); } catch (Exception e) { Debug.WriteLine(e.Message); } Assert.AreEqual(110, ProxyFacade.CheckingAccountProxy().GetCheckingAccountBalance(customerId)); Assert.AreEqual(20, ProxyFacade.SavingsAccountProxy().GetSavingsAccountBalance(customerId)); } } } We are creating a new instance of the channel for every operation, we will look into instance management and how creating a new instance of channel affects it in subsequent articles. The first two test cases deals with creation of Customer, deposit and withdraw of month between accounts. The last case, FundTransferWithOverDraftTest() is interesting. Customer starts with depositing $100 in SavingsAccount followed by transfer of $80 in to checking account resulting in $20 in savings account. Customer then initiates $30 transfer from Savings to Checking resulting in overdraft exception on Savings with $30 being deposited to Checking. As we are not running both the requests in transactions the customer ends up with more amount than what he started with $100. In subsequent posts we will look into transactions handling. Make sure the ServiceHost project is set as start up project and start the solution. Run the test cases either from NUnit client or TestDriven.Net/Resharper which ever is your favorite tool. Make sure you have updated the data base connection string in the ServiceHost config file to point to your local database

Read the article

Extending Oracle CEP with Predictive Analytics

- by vikram.shukla(at)oracle.com

Introduction: OCEP is often used as a business rules engine to execute a set of business logic rules via CQL statements, and take decisions based on the outcome of those rules. There are times where configuring rules manually is sufficient because an application needs to deal with only a small and well-defined set of static rules. However, in many situations customers don't want to pre-define such rules for two reasons. First, they are dealing with events with lots of columns and manually crafting such rules for each column or a set of columns and combinations thereof is almost impossible. Second, they are content with probabilistic outcomes and do not care about 100% precision. The former is the case when a user is dealing with data with high dimensionality, the latter when an application can live with "false" positives as they can be discarded after further inspection, say by a Human Task component in a Business Process Management software. The primary goal of this blog post is to show how this can be achieved by combining OCEP with Oracle Data Mining® and leveraging the latter's rich set of algorithms and functionality to do predictive analytics in real time on streaming events. The secondary goal of this post is also to show how OCEP can be extended to invoke any arbitrary external computation in an RDBMS from within CEP. The extensible facility is known as the JDBC cartridge. The rest of the post describes the steps required to achieve this: We use the dataset available at http://blogs.oracle.com/datamining/2010/01/fraud_and_anomaly_detection_made_simple.html to showcase the capabilities. We use it to show how transaction anomalies or fraud can be detected. Building the model: Follow the self-explanatory steps described at the above URL to build the model. It is very simple - it uses built-in Oracle Data Mining PL/SQL packages to cleanse, normalize and build the model out of the dataset. You can also use graphical Oracle Data Miner® to build the models. To summarize, it involves: Specifying which algorithms to use. In this case we use Support Vector Machines as we're trying to find anomalies in highly dimensional dataset.Build model on the data in the table for the algorithms specified. For this example, the table was populated in the scott/tiger schema with appropriate privileges. Configuring the Data Source: This is the first step in building CEP application using such an integration. Our datasource looks as follows in the server config file. It is advisable that you use the Visualizer to add it to the running server dynamically, rather than manually edit the file. <data-source> <name>DataMining</name> <data-source-params> <jndi-names> <element>DataMining</element> </jndi-names> <global-transactions-protocol>OnePhaseCommit</global-transactions-protocol> </data-source-params> <connection-pool-params> <credential-mapping-enabled></credential-mapping-enabled> <test-table-name>SQL SELECT 1 from DUAL</test-table-name> <initial-capacity>1</initial-capacity> <max-capacity>15</max-capacity> <capacity-increment>1</capacity-increment> </connection-pool-params> <driver-params> <use-xa-data-source-interface>true</use-xa-data-source-interface> <driver-name>oracle.jdbc.OracleDriver</driver-name> <url>jdbc:oracle:thin:@localhost:1522:orcl</url> <properties> <element> <value>scott</value> <name>user</name> </element> <element> <value>{Salted-3DES}AzFE5dDbO2g=</value> <name>password</name> </element> <element> <name>com.bea.core.datasource.serviceName</name> <value>oracle11.2g</value> </element> <element> <name>com.bea.core.datasource.serviceVersion</name> <value>11.2.0</value> </element> <element> <name>com.bea.core.datasource.serviceObjectClass</name> <value>java.sql.Driver</value> </element> </properties> </driver-params> </data-source> Designing the EPN: The EPN is very simple in this example. We briefly describe each of the components. The adapter ("DataMiningAdapter") reads data from a .csv file and sends it to the CQL processor downstream. The event payload here is same as that of the table in the database (refer to the attached project or do a "desc table-name" from a SQL*PLUS prompt). While this is for convenience in this example, it need not be the case. One can still omit fields in the streaming events, and need not match all columns in the table on which the model was built. Better yet, it does not even need to have the same name as columns in the table, as long as you alias them in the USING clause of the mining function. (Caveat: they still need to draw values from a similar universe or domain, otherwise it constitutes incorrect usage of the model). There are two things in the CQL processor ("DataMiningProc") that make scoring possible on streaming events. 1. User defined cartridge function Please refer to the OCEP CQL reference manual to find more details about how to define such functions. We include the function below in its entirety for illustration. <?xml version="1.0" encoding="UTF-8"?> <jdbcctxconfig:config xmlns:jdbcctxconfig="http://www.bea.com/ns/wlevs/config/application" xmlns:jc="http://www.oracle.com/ns/ocep/config/jdbc"> <jc:jdbc-ctx> <name>Oracle11gR2</name> <data-source>DataMining</data-source> <function name="prediction2"> <param name="CQLMONTH" type="char"/> <param name="WEEKOFMONTH" type="int"/> <param name="DAYOFWEEK" type="char" /> <param name="MAKE" type="char" /> <param name="ACCIDENTAREA" type="char" /> <param name="DAYOFWEEKCLAIMED" type="char" /> <param name="MONTHCLAIMED" type="char" /> <param name="WEEKOFMONTHCLAIMED" type="int" /> <param name="SEX" type="char" /> <param name="MARITALSTATUS" type="char" /> <param name="AGE" type="int" /> <param name="FAULT" type="char" /> <param name="POLICYTYPE" type="char" /> <param name="VEHICLECATEGORY" type="char" /> <param name="VEHICLEPRICE" type="char" /> <param name="FRAUDFOUND" type="int" /> <param name="POLICYNUMBER" type="int" /> <param name="REPNUMBER" type="int" /> <param name="DEDUCTIBLE" type="int" /> <param name="DRIVERRATING" type="int" /> <param name="DAYSPOLICYACCIDENT" type="char" /> <param name="DAYSPOLICYCLAIM" type="char" /> <param name="PASTNUMOFCLAIMS" type="char" /> <param name="AGEOFVEHICLES" type="char" /> <param name="AGEOFPOLICYHOLDER" type="char" /> <param name="POLICEREPORTFILED" type="char" /> <param name="WITNESSPRESNT" type="char" /> <param name="AGENTTYPE" type="char" /> <param name="NUMOFSUPP" type="char" /> <param name="ADDRCHGCLAIM" type="char" /> <param name="NUMOFCARS" type="char" /> <param name="CQLYEAR" type="int" /> <param name="BASEPOLICY" type="char" /> <return-component-type>char</return-component-type> <sql><![CDATA[ SELECT to_char(PREDICTION_PROBABILITY(CLAIMSMODEL, '0' USING *)) AS probability FROM (SELECT :CQLMONTH AS MONTH, :WEEKOFMONTH AS WEEKOFMONTH, :DAYOFWEEK AS DAYOFWEEK, :MAKE AS MAKE, :ACCIDENTAREA AS ACCIDENTAREA, :DAYOFWEEKCLAIMED AS DAYOFWEEKCLAIMED, :MONTHCLAIMED AS MONTHCLAIMED, :WEEKOFMONTHCLAIMED, :SEX AS SEX, :MARITALSTATUS AS MARITALSTATUS, :AGE AS AGE, :FAULT AS FAULT, :POLICYTYPE AS POLICYTYPE, :VEHICLECATEGORY AS VEHICLECATEGORY, :VEHICLEPRICE AS VEHICLEPRICE, :FRAUDFOUND AS FRAUDFOUND, :POLICYNUMBER AS POLICYNUMBER, :REPNUMBER AS REPNUMBER, :DEDUCTIBLE AS DEDUCTIBLE, :DRIVERRATING AS DRIVERRATING, :DAYSPOLICYACCIDENT AS DAYSPOLICYACCIDENT, :DAYSPOLICYCLAIM AS DAYSPOLICYCLAIM, :PASTNUMOFCLAIMS AS PASTNUMOFCLAIMS, :AGEOFVEHICLES AS AGEOFVEHICLES, :AGEOFPOLICYHOLDER AS AGEOFPOLICYHOLDER, :POLICEREPORTFILED AS POLICEREPORTFILED, :WITNESSPRESNT AS WITNESSPRESENT, :AGENTTYPE AS AGENTTYPE, :NUMOFSUPP AS NUMOFSUPP, :ADDRCHGCLAIM AS ADDRCHGCLAIM, :NUMOFCARS AS NUMOFCARS, :CQLYEAR AS YEAR, :BASEPOLICY AS BASEPOLICY FROM dual) ]]> </sql> </function> </jc:jdbc-ctx> </jdbcctxconfig:config> 2. Invoking the function for each event. Once this function is defined, you can invoke it from CQL as follows: <?xml version="1.0" encoding="UTF-8"?> <wlevs:config xmlns:wlevs="http://www.bea.com/ns/wlevs/config/application"> <processor> <name>DataMiningProc</name> <rules> <query id="q1"><![CDATA[ ISTREAM(SELECT S.CQLMONTH, S.WEEKOFMONTH, S.DAYOFWEEK, S.MAKE, : S.BASEPOLICY, C.F AS probability FROM StreamDataChannel [NOW] AS S, TABLE(prediction2@Oracle11gR2(S.CQLMONTH, S.WEEKOFMONTH, S.DAYOFWEEK, S.MAKE, ..., S.BASEPOLICY) AS F of char) AS C) ]]></query> </rules> </processor> </wlevs:config> Finally, the last stage in the EPN prints out the probability of the event being an anomaly. One can also define a threshold in CQL to filter out events that are normal, i.e., below a certain mark as defined by the analyst or designer. Sample Runs: Now let's see how this behaves when events are streamed through CEP. We use only two events for brevity, one normal and other one not. This is one of the "normal" looking events and the probability of it being anomalous is less than 60%. Event is: eventType=DataMiningOutEvent object=q1 time=2904821976256 S.CQLMONTH=Dec, S.WEEKOFMONTH=5, S.DAYOFWEEK=Wednesday, S.MAKE=Honda, S.ACCIDENTAREA=Urban, S.DAYOFWEEKCLAIMED=Tuesday, S.MONTHCLAIMED=Jan, S.WEEKOFMONTHCLAIMED=1, S.SEX=Female, S.MARITALSTATUS=Single, S.AGE=21, S.FAULT=Policy Holder, S.POLICYTYPE=Sport - Liability, S.VEHICLECATEGORY=Sport, S.VEHICLEPRICE=more than 69000, S.FRAUDFOUND=0, S.POLICYNUMBER=1, S.REPNUMBER=12, S.DEDUCTIBLE=300, S.DRIVERRATING=1, S.DAYSPOLICYACCIDENT=more than 30, S.DAYSPOLICYCLAIM=more than 30, S.PASTNUMOFCLAIMS=none, S.AGEOFVEHICLES=3 years, S.AGEOFPOLICYHOLDER=26 to 30, S.POLICEREPORTFILED=No, S.WITNESSPRESENT=No, S.AGENTTYPE=External, S.NUMOFSUPP=none, S.ADDRCHGCLAIM=1 year, S.NUMOFCARS=3 to 4, S.CQLYEAR=1994, S.BASEPOLICY=Liability, probability=.58931702982118561 isTotalOrderGuarantee=true\nAnamoly probability: .58931702982118561 However, the following event is scored as an anomaly with a very high probability of 89%. So there is likely to be something wrong with it. A close look reveals that the value of "deductible" field (10000) is not "normal". What exactly constitutes normal here?. If you run the query on the database to find ALL distinct values for the "deductible" field, it returns the following set: {300, 400, 500, 700} Event is: eventType=DataMiningOutEvent object=q1 time=2598483773496 S.CQLMONTH=Dec, S.WEEKOFMONTH=5, S.DAYOFWEEK=Wednesday, S.MAKE=Honda, S.ACCIDENTAREA=Urban, S.DAYOFWEEKCLAIMED=Tuesday, S.MONTHCLAIMED=Jan, S.WEEKOFMONTHCLAIMED=1, S.SEX=Female, S.MARITALSTATUS=Single, S.AGE=21, S.FAULT=Policy Holder, S.POLICYTYPE=Sport - Liability, S.VEHICLECATEGORY=Sport, S.VEHICLEPRICE=more than 69000, S.FRAUDFOUND=0, S.POLICYNUMBER=1, S.REPNUMBER=12, S.DEDUCTIBLE=10000, S.DRIVERRATING=1, S.DAYSPOLICYACCIDENT=more than 30, S.DAYSPOLICYCLAIM=more than 30, S.PASTNUMOFCLAIMS=none, S.AGEOFVEHICLES=3 years, S.AGEOFPOLICYHOLDER=26 to 30, S.POLICEREPORTFILED=No, S.WITNESSPRESENT=No, S.AGENTTYPE=External, S.NUMOFSUPP=none, S.ADDRCHGCLAIM=1 year, S.NUMOFCARS=3 to 4, S.CQLYEAR=1994, S.BASEPOLICY=Liability, probability=.89171554529576691 isTotalOrderGuarantee=true\nAnamoly probability: .89171554529576691 Conclusion: By way of this example, we show: real-time scoring of events as they flow through CEP leveraging Oracle Data Mining.how CEP applications can invoke complex arbitrary external computations (function shipping) in an RDBMS.

Read the article

Problems installing Memcache (PECL extension)

- by Petrus

I have installed memcached fine, and now I will need to install PECL extension memcache. Im running RedHat x86_64 es5. The installation gives me this: downloading memcache-2.2.6.tgz ... Starting to download memcache-2.2.6.tgz (35,957 bytes) ..........done: 35,957 bytes 11 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 Enable memcache session handler support? [yes] : Notice: Use of undefined constant STDIN - assumed 'STDIN' in PEAR/Frontend/CLI.php on line 304 Warning: fgets() expects parameter 1 to be resource, string given in PEAR/Frontend/CLI.php on line 304 Warning: fgets() expects parameter 1 to be resource, string given in /usr/lib/php/PEAR/Frontend/CLI.php on line 304 building in /root/tmp/pear-build-root/memcache-2.2.6 running: /root/tmp/pear/memcache/configure --enable-memcache-session=yes checking for egrep... grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib checking for PHP extension directory... /usr/lib/php/extensions/no-debug-non-zts-20090626 checking for PHP installed headers prefix... /usr/include/php checking if debug is enabled... no checking if zts is enabled... no checking for re2c... re2c checking for re2c version... invalid configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... gawk checking whether to enable memcache support... yes, shared checking whether to enable memcache session handler support... yes checking for the location of ZLIB... no checking for the location of zlib... /usr checking for session includes... /usr/include/php checking for memcache session support... enabled checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking the maximum length of command line arguments... 98304 checking command to parse /usr/bin/nm -B output from cc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no creating libtool appending configuration tag "CXX" to libtool configure: creating ./config.status config.status: creating config.h running: make /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache.c -o memcache.lo mkdir .libs cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache.c -fPIC -DPIC -o .libs/memcache.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_queue.c -o memcache_queue.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_queue.c -fPIC -DPIC -o .libs/memcache_queue.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_standard_hash.c -o memcache_standard_hash.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_standard_hash.c -fPIC -DPIC -o .libs/memcache_standard_hash.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_consistent_hash.c -o memcache_consistent_hash.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_consistent_hash.c -fPIC -DPIC -o .libs/memcache_consistent_hash.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_session.c -o memcache_session.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_session.c -fPIC -DPIC -o .libs/memcache_session.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=link cc -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -o memcache.la -export-dynamic -avoid-version -prefer-pic -module -rpath /root/tmp/pear-build-root/memcache-2.2.6/modules memcache.lo memcache_queue.lo memcache_standard_hash.lo memcache_consistent_hash.lo memcache_session.lo cc -shared .libs/memcache.o .libs/memcache_queue.o .libs/memcache_standard_hash.o .libs/memcache_consistent_hash.o .libs/memcache_session.o -Wl,-soname -Wl,memcache.so -o .libs/memcache.so creating memcache.la (cd .libs && rm -f memcache.la && ln -s ../memcache.la memcache.la) /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=install cp ./memcache.la /root/tmp/pear-build-root/memcache-2.2.6/modules cp ./.libs/memcache.so /root/tmp/pear-build-root/memcache-2.2.6/modules/memcache.so cp ./.libs/memcache.lai /root/tmp/pear-build-root/memcache-2.2.6/modules/memcache.la PATH="$PATH:/sbin" ldconfig -n /root/tmp/pear-build-root/memcache-2.2.6/modules ---------------------------------------------------------------------- Libraries have been installed in: /root/tmp/pear-build-root/memcache-2.2.6/modules If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- Build complete. Don't forget to run 'make test'. running: make INSTALL_ROOT="/root/tmp/pear-build-root/install-memcache-2.2.6" install Installing shared extensions: /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions/no-debug-non-zts-20090626/ running: find "/root/tmp/pear-build-root/install-memcache-2.2.6" | xargs ls -dils 361232 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6 361263 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr 361264 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib 361265 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php 361266 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions 361267 4 drwxr-xr-x 2 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions/no-debug-non-zts-20090626 361262 236 -rwxr-xr-x 1 root root 235575 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions/no-debug-non-zts-20090626/memcache.so Build process completed successfully Installing '/usr/lib/php/extensions/no-debug-non-zts-20090626/memcache.so' install ok: channel://pecl.php.net/memcache-2.2.6 Extension memcache enabled in php.ini The memcache.so object is not in /usr/local/lib/php/extensions/no-debug-non-zts-20090626 I tried as well to install this extension "memcached 1.0.2 (PHP extension for interfacing with memcached via libmemcached library)" but it failed: downloading memcached-1.0.2.tgz ... Starting to download memcached-1.0.2.tgz (22,724 bytes) ........done: 22,724 bytes 4 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 building in /root/tmp/pear-build-root/memcached-1.0.2 running: /root/tmp/pear/memcached/configure checking for egrep... grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib checking for PHP extension directory... /usr/lib/php/extensions/no-debug-non-zts-20090626 checking for PHP installed headers prefix... /usr/include/php checking if debug is enabled... no checking if zts is enabled... no checking for re2c... re2c checking for re2c version... invalid configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... gawk checking whether to enable memcached support... yes, shared checking for libmemcached... yes, shared checking whether to enable memcached session handler support... yes checking whether to enable memcached igbinary serializer support... no checking for ZLIB... yes, shared checking for zlib location... /usr checking for session includes... /usr/include/php checking for memcached session support... enabled checking for memcached igbinary support... disabled checking for libmemcached location... configure: error: memcached support requires libmemcached. Use --with-libmemcached-dir= to specify the prefix where libmemcached headers and library are located ERROR: `/root/tmp/pear/memcached/configure' failed The memcached.so object is not in /usr/local/lib/php/extensions/no-debug-non-zts-20090626 Is there a kind soul out there that can solve this puzzle?

Read the article

FreeBSD performance tuning. Sysctls, loader.conf, kernel

- by SaveTheRbtz

I wanted to share knowledge of tuning FreeBSD via sysctl.conf/loader.conf/KENCONF. It was initially based on Igor Sysoev's (author of nginx) presentation about FreeBSD tuning up to 100,000-200,000 active connections. Tunings are for FreeBSD-CURRENT. Since 7.2 amd64 some of them are tuned well by default. Prior 7.0 some of them are boot only (set via /boot/loader.conf) or does not exist at all. sysctl.conf: # No zero mapping feature # May break wine # (There are also reports about broken samba3) #security.bsd.map_at_zero=0 # If you have really busy webserver with apache13 you may run out of processes #kern.maxproc=10000 # Same for servers with apache2 / Pound #kern.threads.max_threads_per_proc=4096 # Max. backlog size kern.ipc.somaxconn=4096 # Shared memory // 7.2+ can use shared memory > 2Gb kern.ipc.shmmax=2147483648 # Sockets kern.ipc.maxsockets=204800 # Can cause this on older kernels: # http://old.nabble.com/Significant-performance-regression-for-increased-maxsockbuf-on-8.0-RELEASE-tt26745981.html#a26745981 ) kern.ipc.maxsockbuf=10485760 # Mbuf 2k clusters (on amd64 7.2+ 25600 is default) # For such high value vm.kmem_size must be increased to 3G kern.ipc.nmbclusters=262144 # Jumbo pagesize(_SC_PAGESIZE) clusters # Used as general packet storage for jumbo frames # can be monitored via `netstat -m` #kern.ipc.nmbjumbop=262144 # Jumbo 9k/16k clusters # If you are using them #kern.ipc.nmbjumbo9=65536 #kern.ipc.nmbjumbo16=32768 # For lower latency you can decrease scheduler's maximum time slice # default: stathz/10 (~ 13) #kern.sched.slice=1 # Increase max command-line length showed in `ps` (e.g for Tomcat/Java) # Default is PAGE_SIZE / 16 or 256 on x86 # This avoids commands to be presented as [executable] in `ps` # For more info see: http://www.freebsd.org/cgi/query-pr.cgi?pr=120749 kern.ps_arg_cache_limit=4096 # Every socket is a file, so increase them kern.maxfiles=204800 kern.maxfilesperproc=200000 kern.maxvnodes=200000 # On some systems HPET is almost 2 times faster than default ACPI-fast # Useful on systems with lots of clock_gettime / gettimeofday calls # See http://old.nabble.com/ACPI-fast-default-timecounter,-but-HPET-83--faster-td23248172.html # After revision 222222 HPET became default: http://svnweb.freebsd.org/base?view=revision&revision=222222 kern.timecounter.hardware=HPET # Small receive space, only usable on http-server, on file server this # should be increased to 65535 or even more #net.inet.tcp.recvspace=8192 # This is useful on Fat-Long-Pipes #net.inet.tcp.recvbuf_max=10485760 #net.inet.tcp.recvbuf_inc=65535 # Small send space is useful for http servers that serve small files # Autotuned since 7.x net.inet.tcp.sendspace=16384 # This is useful on Fat-Long-Pipes #net.inet.tcp.sendbuf_max=10485760 #net.inet.tcp.sendbuf_inc=65535 # Turn off receive autotuning # You can play with it. #net.inet.tcp.recvbuf_auto=0 #net.inet.tcp.sendbuf_auto=0 # This should be enabled if you going to use big spaces (>64k) # Also timestamp field is useful when using syncookies net.inet.tcp.rfc1323=1 # Turn this off on high-speed, lossless connections (LAN 1Gbit+) # If you set it there is no need in TCP_NODELAY sockopt (see man tcp) net.inet.tcp.delayed_ack=0 # This feature is useful if you are serving data over modems, Gigabit Ethernet, # or even high speed WAN links (or any other link with a high bandwidth delay product), # especially if you are also using window scaling or have configured a large send window. # Automatically disables on small RTT ( http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_subr.c?#rev1.237 ) # This sysctl was removed in 10-CURRENT: # See: http://www.mail-archive.com/[email protected]/msg06178.html #net.inet.tcp.inflight.enable=0 # TCP slowstart algorithm tunings # We assuming we have very fast clients #net.inet.tcp.slowstart_flightsize=100 #net.inet.tcp.local_slowstart_flightsize=100 # Disable randomizing of ports to avoid false RST # Before usage check SA here www.bsdcan.org/2006/papers/ImprovingTCPIP.pdf # (it's also says that port randomization auto-disables at some conn.rates, but I didn't checked it thou) #net.inet.ip.portrange.randomized=0 # Increase portrange # For outgoing connections only. Good for seed-boxes and ftp servers. net.inet.ip.portrange.first=1024 net.inet.ip.portrange.last=65535 # # stops route cache degregation during a high-bandwidth flood # http://www.freebsd.org/doc/en/books/handbook/securing-freebsd.html #net.inet.ip.rtexpire=2 net.inet.ip.rtminexpire=2 net.inet.ip.rtmaxcache=1024 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # # There is also good example of sysctl.conf with comments: # http://www.thern.org/projects/sysctl.conf # # icmp may NOT rst, helpful for those pesky spoofed # icmp/udp floods that end up taking up your outgoing # bandwidth/ifqueue due to all that outgoing RST traffic. # #net.inet.tcp.icmp_may_rst=0 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # IPv6 Security # For more info see http://www.fosslc.org/drupal/content/security-implications-ipv6 # Disable Node info replies # To see this vulnerability in action run `ping6 -a sglAac ::1` or `ping6 -w ::1` on unprotected node net.inet6.icmp6.nodeinfo=0 # Turn on IPv6 privacy extensions # For more info see proposal http://unix.derkeiler.com/Mailing-Lists/FreeBSD/net/2008-06/msg00103.html net.inet6.ip6.use_tempaddr=1 net.inet6.ip6.prefer_tempaddr=1 # Disable ICMP redirect net.inet6.icmp6.rediraccept=0 # Disable acceptation of RA and auto linklocal generation if you don't use them #net.inet6.ip6.accept_rtadv=0 #net.inet6.ip6.auto_linklocal=0 # Increases default TTL, sometimes useful # Default is 64 net.inet.ip.ttl=128 # Lessen max segment life to conserve resources # ACK waiting time in miliseconds # (default: 30000. RFC from 1979 recommends 120000) net.inet.tcp.msl=5000 # Max bumber of timewait sockets net.inet.tcp.maxtcptw=200000 # Don't use tw on local connections # As of 15 Apr 2009. Igor Sysoev says that nolocaltimewait has some buggy realization. # So disable it or now till get fixed #net.inet.tcp.nolocaltimewait=1 # FIN_WAIT_2 state fast recycle net.inet.tcp.fast_finwait2_recycle=1 # Time before tcp keepalive probe is sent # default is 2 hours (7200000) #net.inet.tcp.keepidle=60000 # Should be increased until net.inet.ip.intr_queue_drops is zero net.inet.ip.intr_queue_maxlen=4096 # Interrupt handling via multiple CPU, but with context switch. # You can play with it. Default is 1; #net.isr.direct=0 # This is for routers only #net.inet.ip.forwarding=1 #net.inet.ip.fastforwarding=1 # This speed ups dummynet when channel isn't saturated net.inet.ip.dummynet.io_fast=1 # Increase dummynet(4) hash #net.inet.ip.dummynet.hash_size=2048 #net.inet.ip.dummynet.max_chain_len # Should be increased when you have A LOT of files on server # (Increase until vfs.ufs.dirhash_mem becomes lower) vfs.ufs.dirhash_maxmem=67108864 # Note from commit http://svn.freebsd.org/base/head@211031 : # For systems with RAID volumes and/or virtualization envirnments, where # read performance is very important, increasing this sysctl tunable to 32 # or even more will demonstratively yield additional performance benefits. vfs.read_max=32 # Explicit Congestion Notification (see http://en.wikipedia.org/wiki/Explicit_Congestion_Notification) net.inet.tcp.ecn.enable=1 # Flowtable - flow caching mechanism # Useful for routers #net.inet.flowtable.enable=1 #net.inet.flowtable.nmbflows=65535 # Extreme polling tuning #kern.polling.burst_max=1000 #kern.polling.each_burst=1000 #kern.polling.reg_frac=100 #kern.polling.user_frac=1 #kern.polling.idle_poll=0 # IPFW dynamic rules and timeouts tuning # Increase dyn_buckets till net.inet.ip.fw.curr_dyn_buckets is lower net.inet.ip.fw.dyn_buckets=65536 net.inet.ip.fw.dyn_max=65536 net.inet.ip.fw.dyn_ack_lifetime=120 net.inet.ip.fw.dyn_syn_lifetime=10 net.inet.ip.fw.dyn_fin_lifetime=2 net.inet.ip.fw.dyn_short_lifetime=10 # Make packets pass firewall only once when using dummynet # i.e. packets going thru pipe are passing out from firewall with accept #net.inet.ip.fw.one_pass=1 # shm_use_phys Wires all shared pages, making them unswappable # Use this to lessen Virtual Memory Manager's work when using Shared Mem. # Useful for databases #kern.ipc.shm_use_phys=1 # ZFS # Enable prefetch. Useful for sequential load type i.e fileserver. # FreeBSD sets vfs.zfs.prefetch_disable to 1 on any i386 systems and # on any amd64 systems with less than 4GB of avaiable memory # For additional info check this nabble thread http://old.nabble.com/Samba-read-speed-performance-tuning-td27964534.html #vfs.zfs.prefetch_disable=0 # On highload servers you may notice following message in dmesg: # "Approaching the limit on PV entries, consider increasing either the # vm.pmap.shpgperproc or the vm.pmap.pv_entry_max tunable" vm.pmap.shpgperproc=2048 loader.conf: # Accept filters for data, http and DNS requests # Useful when your software uses select() instead of kevent/kqueue or when you under DDoS # DNS accf available on 8.0+ accf_data_load="YES" accf_http_load="YES" accf_dns_load="YES" # Async IO system calls aio_load="YES" # Linux specific devices in /dev # As for 8.1 it only /dev/full #lindev_load="YES" # Adds NCQ support in FreeBSD # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ # 8.0+ only #ahci_load="YES" #siis_load="YES" # FreeBSD 8.2+ # New Congestion Control for FreeBSD # http://caia.swin.edu.au/urp/newtcp/tools/cc_chd-readme-0.1.txt # http://www.ietf.org/proceedings/78/slides/iccrg-5.pdf # Initial merge commit message http://www.mail-archive.com/[email protected]/msg31410.html #cc_chd_load="YES" # Increase kernel memory size to 3G. # # Use ONLY if you have KVA_PAGES in kernel configuration, and you have more than 3G RAM # Otherwise panic will happen on next reboot! # # It's required for high buffer sizes: kern.ipc.nmbjumbop, kern.ipc.nmbclusters, etc # Useful on highload stateful firewalls, proxies or ZFS fileservers # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #vm.kmem_size="3G" # If your server has lots of swap (>4Gb) you should increase following value # according to http://lists.freebsd.org/pipermail/freebsd-hackers/2009-October/029616.html # Otherwise you'll be getting errors # "kernel: swap zone exhausted, increase kern.maxswzone" # kern.maxswzone="256M" # Older versions of FreeBSD can't tune maxfiles on the fly #kern.maxfiles="200000" # Useful for databases # Sets maximum data size to 1G # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #kern.maxdsiz="1G" # Maximum buffer size(vfs.maxbufspace) # You can check current one via vfs.bufspace # Should be lowered/upped depending on server's load-type # Usually decreased to preserve kmem # (default is 10% of mem) #kern.maxbcache="512M" # Sendfile buffers # For i386 only #kern.ipc.nsfbufs=10240 # FreeBSD 9+ # HPET "legacy route" support. It should allow HPET to work per-CPU # See http://www.mail-archive.com/[email protected]/msg03603.html #hint.atrtc.0.clock=0 #hint.attimer.0.clock=0 #hint.hpet.0.legacy_route=1 # syncache Hash table tuning net.inet.tcp.syncache.hashsize=1024 net.inet.tcp.syncache.bucketlimit=512 net.inet.tcp.syncache.cachelimit=65536 # Increased hostcache # Later host cache can be viewed via net.inet.tcp.hostcache.list hidden sysctl # Very useful for it's RTT RTTVAR # Must be power of two net.inet.tcp.hostcache.hashsize=65536 # hashsize * bucketlimit (which is 30 by default) # It allocates 255Mb (1966080*136) of RAM net.inet.tcp.hostcache.cachelimit=1966080 # TCP control-block Hash table tuning net.inet.tcp.tcbhashsize=4096 # Disable ipfw deny all # Should be uncommented when there is a chance that # kernel and ipfw binary may be out-of sync on next reboot #net.inet.ip.fw.default_to_accept=1 # # SIFTR (Statistical Information For TCP Research) is a kernel module that # logs a range of statistics on active TCP connections to a log file. # See prerelease notes http://groups.google.com/group/mailing.freebsd.current/browse_thread/thread/b4c18be6cdce76e4 # and man 4 sitfr #siftr_load="YES" # Enable superpages, for 7.2+ only # Also read http://lists.freebsd.org/pipermail/freebsd-hackers/2009-November/030094.html vm.pmap.pg_ps_enabled=1 # Usefull if you are using Intel-Gigabit NIC #hw.em.rxd=4096 #hw.em.txd=4096 #hw.em.rx_process_limit="-1" # Also if you have ALOT interrupts on NIC - play with following parameters # NOTE: You should set them for every NIC #dev.em.0.rx_int_delay: 250 #dev.em.0.tx_int_delay: 250 #dev.em.0.rx_abs_int_delay: 250 #dev.em.0.tx_abs_int_delay: 250 # There is also multithreaded version of em/igb drivers can be found here: # http://people.yandex-team.ru/~wawa/ # # for additional em monitoring and statistics use # sysctl dev.em.0.stats=1 ; dmesg # sysctl dev.em.0.debug=1 ; dmesg # Also after r209242 (-CURRENT) there is a separate sysctl for each stat variable; # Same tunings for igb #hw.igb.rxd=4096 #hw.igb.txd=4096 #hw.igb.rx_process_limit=100 # Some useful netisr tunables. See sysctl net.isr #net.isr.maxthreads=4 #net.isr.defaultqlimit=4096 #net.isr.maxqlimit: 10240 # Bind netisr threads to CPUs #net.isr.bindthreads=1 # # FreeBSD 9.x+ # Increase interface send queue length # See commit message http://svn.freebsd.org/viewvc/base?view=revision&revision=207554 #net.link.ifqmaxlen=1024 # Nicer boot logo =) loader_logo="beastie" And finally here is KERNCONF: # Just some of them, see also # cat /sys/{i386,amd64,}/conf/NOTES # This one useful only on i386 #options KVA_PAGES=512 # You can play with HZ in environments with high interrupt rate (default is 1000) # 100 is for my notebook to prolong it's battery life #options HZ=100 # Polling is goot on network loads with high packet rates and low-end NICs # NB! Do not enable it if you want more than one netisr thread #options DEVICE_POLLING # Eliminate datacopy on socket read-write # To take advantage with zero copy sockets you should have an MTU >= 4k # This req. is only for receiving data. # Read more in man zero_copy_sockets # Also this epic thread on kernel trap: # http://kerneltrap.org/node/6506 # Here Linus says that "anybody that does it that way (FreeBSD) is totally incompetent" #options ZERO_COPY_SOCKETS # Support TCP sign. Used for IPSec options TCP_SIGNATURE # There was stackoverflow found in KAME IPSec stack: # See http://secunia.com/advisories/43995/ # For quick workaround you can use `ipfw add deny proto ipcomp` options IPSEC # This ones can be loaded as modules. They described in loader.conf section #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP # Adding ipfw, also can be loaded as modules options IPFIREWALL # On 8.1+ you can disable verbose to see blocked packets on ipfw0 interface. # Also there is no point in compiling verbose into the kernel, because # now there is net.inet.ip.fw.verbose tunable. #options IPFIREWALL_VERBOSE #options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_FORWARD # Adding kernel NAT options IPFIREWALL_NAT options LIBALIAS # Traffic shaping options DUMMYNET # Divert, i.e. for userspace NAT options IPDIVERT # This is for OpenBSD's pf firewall device pf device pflog # pf's QoS - ALTQ options ALTQ options ALTQ_CBQ # Class Bases Queuing (CBQ) options ALTQ_RED # Random Early Detection (RED) options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC) options ALTQ_PRIQ # Priority Queuing (PRIQ) options ALTQ_NOPCC # Required for SMP build # Pretty console # Manual can be found here http://forums.freebsd.org/showthread.php?t=6134 #options VESA #options SC_PIXEL_MODE # Disable reboot on Ctrl Alt Del #options SC_DISABLE_REBOOT # Change normal|kernel messages color options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK) # More scroll space options SC_HISTORY_SIZE=8192 # Adding hardware crypto device device crypto device cryptodev # Useful network interfaces device vlan device tap #Virtual Ethernet driver device gre #IP over IP tunneling device if_bridge #Bridge interface device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device enc #IPsec interface device lagg #Link aggregation interface device stf #IPv4-IPv6 port # Also for my notebook, but may be used with Opteron device amdtemp # Same for Intel processors device coretemp # man 4 cpuctl device cpuctl # CPU control pseudo-device # Support for ECMP. More than one route for destination # Works even with default route so one can use it as LB for two ISP # For now code is unstable and panics (panic: rtfree 2) on route deletions. #options RADIX_MPATH # Multicast routing #options MROUTING #options PIM # Debug & DTrace options KDB # Kernel debugger related code options KDB_TRACE # Print a stack trace for a panic options KDTRACE_FRAME # amd64-only(?) options KDTRACE_HOOKS # all architectures - enable general DTrace hooks #options DDB #options DDB_CTF # all architectures - kernel ELF linker loads CTF data # Adaptive spining in lockmgr (8.x+) # See http://www.mail-archive.com/[email protected]/msg10782.html options ADAPTIVE_LOCKMGRS # UTF-8 in console (8.x+) #options TEKEN_UTF8 # FreeBSD 8.1+ # Deadlock resolver thread # For additional information see http://www.mail-archive.com/[email protected]/msg18124.html # (FYI: "resolution" is panic so use with caution) #options DEADLKRES # Increase maximum size of Raw I/O and sendfile(2) readahead #options MAXPHYS=(1024*1024) #options MAXBSIZE=(1024*1024) # For scheduler debug enable following option. # Debug will be available via `kern.sched.stats` sysctl # For more information see http://svnweb.freebsd.org/base/head/sys/conf/NOTES?view=markup #options SCHED_STATS If you are tuning network for maximum performance you may wish to play with ifconfig options like: # You can list all capabilities via `ifconfig -m` ifconfig [-]rxcsum [-]txcsum [-]tso [-]lro mtu In case you've enabled DDB in kernel config, you should edit your /etc/ddb.conf and add something like this to enable automatic reboot (and textdump as bonus): script kdb.enter.panic=textdump set; capture on; show pcpu; bt; ps; alltrace; capture off; call doadump; reset script kdb.enter.default=textdump set; capture on; bt; ps; capture off; call doadump; reset And do not forget to add ddb_enable="YES" to /etc/rc.conf Since FreeBSD 9 you can select to enable/disable flowcontrol on your NIC: # See http://en.wikipedia.org/wiki/Ethernet_flow_control and # http://www.mail-archive.com/[email protected]/msg07927.html for additional info ifconfig bge0 media auto mediaopt flowcontrol PS. Also most of FreeBSD's limits can be monitored by # vmstat -z and # limits PPS. variety of network counters can be monitored via # netstat -s In FreeBSD-9 netstat's -Q option appeared, try following command to display netisr stats # netstat -Q PPPS. also see # man 7 tuning PPPPS. I wanted to thank FreeBSD community, especially author of nginx - Igor Sysoev, nginx-ru@ and FreeBSD-performance@ mailing lists for providing useful information about FreeBSD tuning. FreeBSD WIP * Whats cooking for FreeBSD 7? * Whats cooking for FreeBSD 8? * Whats cooking for FreeBSD 9? So here is the question: What tunings are you using on yours FreeBSD servers? You can also post your /etc/sysctl.conf, /boot/loader.conf, kernel options, etc with description of its' meaning (do not copy-paste from sysctl -d). Don't forget to specify server type (web, smb, gateway, etc) Let's share experience!

Read the article

Active Directory and Apple's Workgroup Manager

- by qbn

I thought I'd share my experiences here. I work for a small business with only ~20 users. I wanted the ability to use managed client preferences to assign things like the software update server. Basically the ability to manage my Macs easily and in a native way. At first I tried the magic triangle solution, but I found this to be very complicated. Not only does it require a Mac OS X Server, but it gives you two points of failure. Additionally each Mac workstation must be bound to both servers. Eventually I sucked it up and went with the schema changes documented here. I was hesitant at first, because the instructions require a lot of manual work. However it was fairly basic and only took me about an hour and a half. Below you'll find the schema changes file that was a result of my work. I followed the instructions exactly and double checked everything, after six months of having this in place things have been running great. Too good to not share. I hope I save someone a couple of hours. # ================================================================== # # This file should be imported with the following command: # ldifde -i -u -f Apple AD Schema Changes.ldf -s server:port -b username domain password -j . -c "cn=Configuration,dc=X" #configurationNamingContext # LDIFDE.EXE from AD/AM V1.0 or above must be used. # This LDIF file should be imported into AD or AD/AM. It may not work for other directories. # # ================================================================== # ================================================================== # Attributes # ================================================================== # Attribute: apple-category dn: cn=apple-category,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.10.4 ldapDisplayName: apple-category attributeSyntax: 2.5.5.12 adminDescription: Category for the computer or neighborhood oMSyntax: 64 systemOnly: FALSE # Attribute: apple-computeralias dn: cn=apple-computeralias,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.20.3 ldapDisplayName: apple-computeralias attributeSyntax: 2.5.5.12 adminDescription: XML plist referring to a computer record oMSyntax: 64 systemOnly: FALSE # Attribute: apple-computer-list-groups dn: cn=apple-computer-list-groups,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.11.4 ldapDisplayName: apple-computer-list-groups attributeSyntax: 2.5.5.12 adminDescription: groups oMSyntax: 64 systemOnly: FALSE # Attribute: apple-computers dn: cn=apple-computers,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.11.3 ldapDisplayName: apple-computers attributeSyntax: 2.5.5.12 adminDescription: computers oMSyntax: 64 systemOnly: FALSE # Attribute: apple-data-stamp dn: cn=apple-data-stamp,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.12.2 ldapDisplayName: apple-data-stamp attributeSyntax: 2.5.5.5 adminDescription: data stamp oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-dns-domain dn: cn=apple-dns-domain,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.18.1 ldapDisplayName: apple-dns-domain attributeSyntax: 2.5.5.12 adminDescription: DNS domain oMSyntax: 64 systemOnly: FALSE # Attribute: apple-dnsname dn: cn=apple-dnsname,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.4 ldapDisplayName: apple-dnsname attributeSyntax: 2.5.5.12 adminDescription: DNS name oMSyntax: 64 systemOnly: FALSE # Attribute: apple-dns-nameserver dn: cn=apple-dns-nameserver,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.18.2 ldapDisplayName: apple-dns-nameserver attributeSyntax: 2.5.5.12 adminDescription: DNS name server list oMSyntax: 64 systemOnly: FALSE # Attribute: apple-group-homeowner dn: cn=apple-group-homeowner,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.14.2 ldapDisplayName: apple-group-homeowner attributeSyntax: 2.5.5.5 adminDescription: group home owner settings oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-group-homeurl dn: cn=apple-group-homeurl,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.14.1 ldapDisplayName: apple-group-homeurl attributeSyntax: 2.5.5.5 adminDescription: group home url oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-imhandle dn: cn=apple-imhandle,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.21 ldapDisplayName: apple-imhandle attributeSyntax: 2.5.5.12 adminDescription: IM handle (service:account name) oMSyntax: 64 systemOnly: FALSE # Attribute: apple-keyword dn: cn=apple-keyword,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.19 ldapDisplayName: apple-keyword attributeSyntax: 2.5.5.12 adminDescription: keywords oMSyntax: 64 systemOnly: FALSE # Attribute: apple-mcxflags dn: cn=apple-mcxflags,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.10 ldapDisplayName: apple-mcxflags attributeSyntax: 2.5.5.12 adminDescription: mcx flags oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-mcxsettings dn: cn=apple-mcxsettings,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.16 ldapDisplayName: apple-mcxsettings attributeSyntax: 2.5.5.12 adminDescription: mcx settings oMSyntax: 64 systemOnly: FALSE # Attribute: apple-neighborhoodalias dn: cn=apple-neighborhoodalias,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.20.2 ldapDisplayName: apple-neighborhoodalias attributeSyntax: 2.5.5.12 adminDescription: XML plist referring to another neighborhood record oMSyntax: 64 systemOnly: FALSE # Attribute: apple-networkview dn: cn=apple-networkview,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.10.3 ldapDisplayName: apple-networkview attributeSyntax: 2.5.5.12 adminDescription: Network view for the computer oMSyntax: 64 systemOnly: FALSE # Attribute: apple-nodepathxml dn: cn=apple-nodepathxml,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.20.1 ldapDisplayName: apple-nodepathxml attributeSyntax: 2.5.5.12 adminDescription: XML plist of directory node path oMSyntax: 64 systemOnly: FALSE # Attribute: apple-service-location dn: cn=apple-service-location,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.5 ldapDisplayName: apple-service-location attributeSyntax: 2.5.5.12 adminDescription: Service location oMSyntax: 64 systemOnly: FALSE # Attribute: apple-service-port dn: cn=apple-service-port,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.3 ldapDisplayName: apple-service-port attributeSyntax: 2.5.5.9 adminDescription: Service port number oMSyntax: 2 systemOnly: FALSE # Attribute: apple-service-type dn: cn=apple-service-type,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.1 ldapDisplayName: apple-service-type attributeSyntax: 2.5.5.5 adminDescription: type of service oMSyntax: 22 systemOnly: FALSE # Attribute: apple-service-url dn: cn=apple-service-url,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.2 ldapDisplayName: apple-service-url attributeSyntax: 2.5.5.5 adminDescription: URL of service oMSyntax: 22 systemOnly: FALSE # Attribute: apple-user-authenticationhint dn: cn=apple-user-authenticationhint,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.15 ldapDisplayName: apple-user-authenticationhint attributeSyntax: 2.5.5.12 adminDescription: password hint oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-class dn: cn=apple-user-class,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.7 ldapDisplayName: apple-user-class attributeSyntax: 2.5.5.5 adminDescription: user class oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-homequota dn: cn=apple-user-homequota,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.8 ldapDisplayName: apple-user-homequota attributeSyntax: 2.5.5.5 adminDescription: home directory quota oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-homesoftquota dn: cn=apple-user-homesoftquota,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.17 ldapDisplayName: apple-user-homesoftquota attributeSyntax: 2.5.5.5 adminDescription: home directory soft quota oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-homeurl dn: cn=apple-user-homeurl,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.6 ldapDisplayName: apple-user-homeurl attributeSyntax: 2.5.5.5 adminDescription: home directory URL oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-mailattribute dn: cn=apple-user-mailattribute,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.9 ldapDisplayName: apple-user-mailattribute attributeSyntax: 2.5.5.12 adminDescription: mail attribute oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-picture dn: cn=apple-user-picture,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.12 ldapDisplayName: apple-user-picture attributeSyntax: 2.5.5.12 adminDescription: picture oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-printattribute dn: cn=apple-user-printattribute,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.13 ldapDisplayName: apple-user-printattribute attributeSyntax: 2.5.5.12 adminDescription: print attribute oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-webloguri dn: cn=apple-webloguri,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.22 ldapDisplayName: apple-webloguri attributeSyntax: 2.5.5.12 adminDescription: Weblog URI oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-xmlplist dn: cn=apple-xmlplist,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.17.1 ldapDisplayName: apple-xmlplist attributeSyntax: 2.5.5.12 adminDescription: XML plist data oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: ipHostNumber dn: cn=ipHostNumber,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.1.1.1.19 ldapDisplayName: ipHostNumber attributeSyntax: 2.5.5.5 adminDescription: IP address oMSyntax: 22 systemOnly: FALSE rangeUpper: 128 # Attribute: macAddress dn: cn=macAddress,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.1.1.1.22 ldapDisplayName: macAddress attributeSyntax: 2.5.5.5 adminDescription: MAC address oMSyntax: 22 systemOnly: FALSE rangeUpper: 128 # Attribute: mountDirectory dn: cn=apple-mountDirectory,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.1 ldapDisplayName: mountDirectory attributeSyntax: 2.5.5.12 adminDescription: mount path oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: mountDumpFrequency dn: cn=apple-mountDumpFrequency,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.4 ldapDisplayName: mountDumpFrequency attributeSyntax: 2.5.5.5 adminDescription: mount dump frequency oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: mountOption dn: cn=apple-mountOption,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.3 ldapDisplayName: mountOption attributeSyntax: 2.5.5.5 adminDescription: mount options oMSyntax: 22 systemOnly: FALSE # Attribute: mountPassNo dn: cn=apple-mountPassNo,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.5 ldapDisplayName: mountPassNo attributeSyntax: 2.5.5.5 adminDescription: mount passno oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: mountType dn: cn=apple-mountType,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.2 ldapDisplayName: mountType attributeSyntax: 2.5.5.5 adminDescription: mount VFS type oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: ttl dn: cn=ttl,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.250.1.60 ldapDisplayName: ttl attributeSyntax: 2.5.5.9 oMSyntax: 2 isSingleValued: TRUE systemOnly: FALSE dn: changetype: modify add: schemaUpdateNow schemaUpdateNow: 1 - # ================================================================== # Classes # ================================================================== # Class: apple-computer dn: cn=apple-computer,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.10 ldapDisplayName: apple-computer adminDescription: computer objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-category mayContain: 1.3.6.1.4.1.63.1000.1.1.1.10.4 # mayContain: apple-computer-list-groups mayContain: 1.3.6.1.4.1.63.1000.1.1.1.11.4 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 # mayContain: apple-networkview mayContain: 1.3.6.1.4.1.63.1000.1.1.1.10.3 # mayContain: apple-service-url mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.2 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 # mayContain: macAddress mayContain: 1.3.6.1.1.1.1.22 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 # Class: apple-computer-list dn: cn=apple-computer-list,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.11 ldapDisplayName: apple-computer-list adminDescription: computer list objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-computer-list-groups mayContain: 1.3.6.1.4.1.63.1000.1.1.1.11.4 # mayContain: apple-computers mayContain: 1.3.6.1.4.1.63.1000.1.1.1.11.3 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-configuration dn: cn=apple-configuration,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.12 ldapDisplayName: apple-configuration adminDescription: configuration objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-data-stamp mayContain: 1.3.6.1.4.1.63.1000.1.1.1.12.2 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-group dn: cn=apple-group,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.14 ldapDisplayName: apple-group adminDescription: group account objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-group-homeowner mayContain: 1.3.6.1.4.1.63.1000.1.1.1.14.2 # mayContain: apple-group-homeurl mayContain: 1.3.6.1.4.1.63.1000.1.1.1.14.1 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 # mayContain: apple-user-picture mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.12 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 # Class: apple-location dn: cn=apple-location,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.18 ldapDisplayName: apple-location objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-dns-domain mayContain: 1.3.6.1.4.1.63.1000.1.1.1.18.1 # mayContain: apple-dns-nameserver mayContain: 1.3.6.1.4.1.63.1000.1.1.1.18.2 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-neighborhood dn: cn=apple-neighborhood,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.20 ldapDisplayName: apple-neighborhood objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-category mayContain: 1.3.6.1.4.1.63.1000.1.1.1.10.4 # mayContain: apple-computeralias mayContain: 1.3.6.1.4.1.63.1000.1.1.1.20.3 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-neighborhoodalias mayContain: 1.3.6.1.4.1.63.1000.1.1.1.20.2 # mayContain: apple-nodepathxml mayContain: 1.3.6.1.4.1.63.1000.1.1.1.20.1 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 possSuperiors: 2.5.6.5 possSuperiors: container # Class: apple-serverassistant-config dn: cn=apple-serverassistant-config,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.17 ldapDisplayName: apple-serverassistant-config objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-service dn: cn=apple-service,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.19 ldapDisplayName: apple-service objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mustContain: apple-service-type mustContain: 1.3.6.1.4.1.63.1000.1.1.1.19.1 # mayContain: apple-dnsname mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.4 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-service-location mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.5 # mayContain: apple-service-port mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.3 # mayContain: apple-service-url mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.2 # mayContain: ipHostNumber mayContain: 1.3.6.1.1.1.1.19 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-user dn: cn=apple-user,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.1 ldapDisplayName: apple-user adminDescription: apple user account objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-imhandle mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.21 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 # mayContain: apple-user-authenticationhint mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.15 # mayContain: apple-user-class mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.7 # mayContain: apple-user-homequota mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.8 # mayContain: apple-user-homesoftquota mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.17 # mayContain: apple-user-homeurl mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.6 # mayContain: apple-user-mailattribute mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.9 # mayContain: apple-user-picture mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.12 # mayContain: apple-user-printattribute mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.13 # mayContain: apple-webloguri mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.22 # Class: mount dn: cn=apple-mount,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.8 ldapDisplayName: mount objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: mountDirectory mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.1 # mayContain: mountDumpFrequency mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.4 # mayContain: mountOption mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.3 # mayContain: mountPassNo mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.5 # mayContain: mountType mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.2 possSuperiors: 2.5.6.5 possSuperiors: container dn: changetype: modify add: schemaUpdateNow schemaUpdateNow: 1 - # ================================================================== # Updating present elements # ================================================================== # Add the new class to the user object dn: CN=User,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-user - # Add the new class to the computer object dn: CN=Computer,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-computer - # Add the new class to the group object dn: CN=Group,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-group - # Add the new class to the configuration object dn: CN=Configuration,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-configuration -

Read the article

PSTN Trunk TDM400P Install on Asterisk / Trixbox

- by Jona

Hey All, I'm trying to get a TDM400P card with FXO module to connect to our PSTN line. The card is correctly detected by Linux: [trixbox1.localdomain asterisk]# lspci 00:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface I've run setup-pstn which produces the following output trixbox1.localdomain ~]# setup-pstn -------------------------------------------------------------- Detecting PSTN cards and USB PSTN Devices -------------------------------------------------------------- Hardware present! STOPPING ASTERISK Asterisk Stopped STOPPING FOP SERVER FOP Server Stopped Unloading DAHDI hardware modules: done Loading DAHDI hardware modules: wct4xxp: [ OK ] wcte12xp: [ OK ] wct1xxp: [ OK ] wcte11xp: [ OK ] wctdm24xxp: [ OK ] opvxa1200: [ OK ] wcfxo: [ OK ] wctdm: [ OK ] wcb4xxp: [ OK ] wctc4xxp: [ OK ] xpp_usb: [ OK ] Running dahdi_cfg: [ OK ] SETTING FILE PERMISSIONS Permissions OK STARTING ASTERISK Asterisk Started STARTING FOP SERVER FOP Server Started Chan Extension Context Language MOH Interpret Blocked State pseudo default en default In Service 1 from-pstn en default In Service dahdi_scan returns: dahdi_scan [1] active=yes alarms=OK description=Wildcard TDM400P REV I Board 5 name=WCTDM/4 manufacturer=Digium devicetype=Wildcard TDM400P REV I location=PCI Bus 00 Slot 10 basechan=1 totchans=4 irq=209 type=analog port=1,FXO port=2,none port=3,none port=4,none And asterisk can see the channel: > trixbox1*CLI> dahdi show channel 1 > Channel: 1LI> File Descriptor: 14 > Span: 11*CLI> Extension: I> Dialing: > noI> Context: from-pstn Caller ID: I> > Calling TON: 0 Caller ID name: > Mailbox: none Destroy: 0LI> InAlarm: > 1LI> Signalling Type: FXS Kewlstart > Radio: 0*CLI> Owner: <None> Real: > <None>> Callwait: <None> Threeway: > <None> Confno: -1LI> Propagated > Conference: -1 Real in conference: 0 > DSP: no1*CLI> Busy Detection: no TDD: > no1*CLI> Relax DTMF: no > Dialing/CallwaitCAS: 0/0 Default law: > ulaw Fax Handled: no Pulse phone: no > DND: no1*CLI> Echo Cancellation: > trixbox1128 taps trixbox1(unless TDM > bridged) currently OFF Actual > Confinfo: Num/0, Mode/0x0000 Actual > Confmute: No > Hookstate (FXS only): Onhook A cat of /etc/asterisk/dahdi.conf shows: [trixbox1.localdomain ~]# cat /etc/asterisk/dahdi-channels.conf ; Autogenerated by /usr/sbin/dahdi_genconf on Tue May 25 17:45:13 2010 ; If you edit this file and execute /usr/sbin/dahdi_genconf again, ; your manual changes will be LOST. ; Dahdi Channels Configurations (chan_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings ; ; Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER) ;;; line="1 WCTDM/4/0 FXSKS (SWEC: MG2)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 1 callerid= group= context=default I have configured a "ZAP Trunk (DAHDI compatibility Mode)" with the ZAP identifier 1 and an outbound route, but when ever I try to make an external call via it I get the "All Circuits are busy now, please try your call again later message". I have one outbound route which uses the dial pattern 9|. and the Trunk Zap/1 and one Zap Trunk which uses Zap Identifier (trunk name): 1 and has no Dial Rules. The FXO module is directly connected to our phone line from BT via a BT-RJ11 cable. When running tail -f /var/log/asterisk/full and placing a call I get the following output: [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP RTP TOS bits 184 [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP RTP CoS mark 5 [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP VRTP TOS bits 136 [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP VRTP CoS mark 6 [May 26 11:10:52] WARNING[2661] pbx.c: FONALITY: This thread has already held the conlock, skip locking [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:1] Macro("SIP/801-b7ce8c28", "user-callerid,SKIPTTL,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:1] Set("SIP/801-b7ce8c28", "AMPUSER=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:2] GotoIf("SIP/801-b7ce8c28", "0?report") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:3] ExecIf("SIP/801-b7ce8c28", "1?Set(REALCALLERIDNUM=801)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:4] Set("SIP/801-b7ce8c28", "AMPUSER=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:5] Set("SIP/801-b7ce8c28", "AMPUSERCIDNAME=Jona") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:6] GotoIf("SIP/801-b7ce8c28", "0?report") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:7] Set("SIP/801-b7ce8c28", "AMPUSERCID=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:8] Set("SIP/801-b7ce8c28", "CALLERID(all)="Jona" <801>") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:9] Set("SIP/801-b7ce8c28", "REALCALLERIDNUM=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:10] ExecIf("SIP/801-b7ce8c28", "0?Set(CHANNEL(language)=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:11] GotoIf("SIP/801-b7ce8c28", "1?continue") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-user-callerid,s,20) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:20] NoOp("SIP/801-b7ce8c28", "Using CallerID "Jona" <801>") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:2] Set("SIP/801-b7ce8c28", "_NODEST=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:3] Macro("SIP/801-b7ce8c28", "record-enable,801,OUT,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-record-enable:1] GotoIf("SIP/801-b7ce8c28", "1?check") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-record-enable,s,4) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-record-enable:4] AGI("SIP/801-b7ce8c28", "recordingcheck,20100526-111052,1274868652.1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck [May 26 11:10:52] VERBOSE[2858] logger.c: recordingcheck,20100526-111052,1274868652.1: Outbound recording not enabled [May 26 11:10:52] VERBOSE[2858] logger.c: -- <SIP/801-b7ce8c28>AGI Script recordingcheck completed, returning 0 [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-record-enable:5] MacroExit("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:4] Macro("SIP/801-b7ce8c28", "dialout-trunk,1,01483890915,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:1] Set("SIP/801-b7ce8c28", "DIAL_TRUNK=1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/801-b7ce8c28", "0?sub-pincheck,s,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/801-b7ce8c28", "0?disabletrunk,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:4] Set("SIP/801-b7ce8c28", "DIAL_NUMBER=01483890915") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:5] Set("SIP/801-b7ce8c28", "DIAL_TRUNK_OPTIONS=tr") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:6] Set("SIP/801-b7ce8c28", "OUTBOUND_GROUP=OUT_1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/801-b7ce8c28", "1?nomax") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-dialout-trunk,s,9) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/801-b7ce8c28", "0?skipoutcid") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:10] Set("SIP/801-b7ce8c28", "DIAL_TRUNK_OPTIONS=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:11] Macro("SIP/801-b7ce8c28", "outbound-callerid,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERPRES()=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/801-b7ce8c28", "0?Set(REALCALLERIDNUM=801)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/801-b7ce8c28", "1?normcid") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-outbound-callerid,s,6) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:6] Set("SIP/801-b7ce8c28", "USEROUTCID=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:7] Set("SIP/801-b7ce8c28", "EMERGENCYCID=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:8] Set("SIP/801-b7ce8c28", "TRUNKOUTCID=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/801-b7ce8c28", "1?trunkcid") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-outbound-callerid,s,12) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERID(all)=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERID(all)=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/801-b7ce8c28", "0?AGI(fixlocalprefix)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:13] Set("SIP/801-b7ce8c28", "OUTNUM=01483890915") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:14] Set("SIP/801-b7ce8c28", "custom=DAHDI/1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/801-b7ce8c28", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:16] Macro("SIP/801-b7ce8c28", "dialout-trunk-predial-hook,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/801-b7ce8c28", "0?bypass,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/801-b7ce8c28", "0?customtrunk") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:19] Dial("SIP/801-b7ce8c28", "DAHDI/1/01483890915,300,") in new stack [May 26 11:10:52] WARNING[2858] app_dial.c: Unable to create channel of type 'DAHDI' (cause 0 - Unknown) [May 26 11:10:52] VERBOSE[2858] logger.c: == Everyone is busy/congested at this time (1:0/0/1) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:20] Goto("SIP/801-b7ce8c28", "s-CHANUNAVAIL,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/801-b7ce8c28", "1?noreport") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/801-b7ce8c28", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 0) - failing through to other trunks") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:5] Macro("SIP/801-b7ce8c28", "outisbusy,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outisbusy:1] Playback("SIP/801-b7ce8c28", "all-circuits-busy-now,noanswer") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- <SIP/801-b7ce8c28> Playing 'all-circuits-busy-now.ulaw' (language 'en') [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-outisbusy:2] Playback("SIP/801-b7ce8c28", "pls-try-call-later,noanswer") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- <SIP/801-b7ce8c28> Playing 'pls-try-call-later.ulaw' (language 'en') [May 26 11:10:54] WARNING[2661] pbx.c: FONALITY: This thread has already held the conlock, skip locking [May 26 11:10:54] VERBOSE[2858] logger.c: == Spawn extension (macro-outisbusy, s, 2) exited non-zero on 'SIP/801-b7ce8c28' in macro 'outisbusy' [May 26 11:10:54] VERBOSE[2858] logger.c: == Spawn extension (from-internal, 901483890915, 5) exited non-zero on 'SIP/801-b7ce8c28' [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [h@from-internal:1] Macro("SIP/801-b7ce8c28", "hangupcall") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:1] ResetCDR("SIP/801-b7ce8c28", "vw") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:2] NoCDR("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:3] GotoIf("SIP/801-b7ce8c28", "1?skiprg") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Goto (macro-hangupcall,s,6) [May 26 11:10:55] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:6] GotoIf("SIP/801-b7ce8c28", "1?skipblkvm") in new stack [May 26 11:10:55] VERBOSE[2858] logger.c: -- Goto (macro-hangupcall,s,9) [May 26 11:10:55] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:9] GotoIf("SIP/801-b7ce8c28", "1?theend") in new stack [May 26 11:10:55] VERBOSE[2858] logger.c: -- Goto (macro-hangupcall,s,11) [May 26 11:10:55] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:11] Hangup("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:55] VERBOSE[2858] logger.c: == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/801-b7ce8c28' in macro 'hangupcall' [May 26 11:10:55] VERBOSE[2858] logger.c: == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/801-b7ce8c28' I'm guessing I've missed a configuration step somewhere but no idea where, any help greatly appreciated.

Read the article

DD-WRT No Internet connection over LAN

- by algorithms

I flashed the DD-WRT firmware on my TP-Link WR1043ND router and although after cloning the PC's MAC-Address it gets the correct IP from my ISP, the internet connection over LAN just won't work. The strange thing is it does work flawlessly over W-LAN, which tells me the problem should lie somehow in the default LAN settings or the PC. Any idea what the problem might be? UPDATE: It seems the problem is the desktop PC, since the laptop can connect to the interet via ethernet without any problems. ipconfig /all seems totally normal (dhcp, dns, gateway all set to 192.168.1.1) I already tried the following things without success: disabling firewall rebooting router/modem/pc router hard-reset resetting tcp/ip and winsock manual setting of DNS/IP/Gateway Here is the ipconfig /all: Windows-IP-Konfiguration Hostname . . . . . . . . . . . . : Nitro-PC Primäres DNS-Suffix . . . . . . . : Knotentyp . . . . . . . . . . . . : Hybrid IP-Routing aktiviert . . . . . . : Nein WINS-Proxy aktiviert . . . . . . : Nein Ethernet-Adapter LAN-Verbindung 2: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : TAP-Win32 Adapter V9 Physikalische Adresse . . . . . . : 00-FF-56-CA-66-8D DHCP aktiviert. . . . . . . . . . : Ja Autokonfiguration aktiviert . . . : Ja Ethernet-Adapter LAN-Verbindung: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Realtek PCIe GBE Family Controller Physikalische Adresse . . . . . . : 48-5B-39-5B-DE-17 DHCP aktiviert. . . . . . . . . . : Ja Autokonfiguration aktiviert . . . : Ja Verbindungslokale IPv6-Adresse . : fe80::6934:b121:9eab:c6ce%10(Bevorzugt) IPv4-Adresse . . . . . . . . . . : 192.168.1.18(Bevorzugt) Subnetzmaske . . . . . . . . . . : 255.255.255.0 Lease erhalten. . . . . . . . . . : Donnerstag, 30. August 2012 10:52:30 Lease läuft ab. . . . . . . . . . : Freitag, 31. August 2012 10:52:30 Standardgateway . . . . . . . . . : 192.168.1.1 DHCP-Server . . . . . . . . . . . : 192.168.1.1 DHCPv6-IAID . . . . . . . . . . . : 239622969 DHCPv6-Client-DUID. . . . . . . . : 00-01-00-01-17-43-0D-B2-48-5B-39-5B-DE-17 DNS-Server . . . . . . . . . . . : 192.168.1.1 NetBIOS über TCP/IP . . . . . . . : Aktiviert Tunneladapter isatap.{56CA668D-9112-4399-9D9A-F1D42F0E52DE}: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Microsoft-ISATAP-Adapter Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja Tunneladapter Teredo Tunneling Pseudo-Interface: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja IPv6-Adresse. . . . . . . . . . . : 2001:0:5ef5:79fd:1432:3dcd:3f57:feed(Bevorzugt) Verbindungslokale IPv6-Adresse . : fe80::1432:3dcd:3f57:feed%12(Bevorzugt) Standardgateway . . . . . . . . . : :: NetBIOS über TCP/IP . . . . . . . : Deaktiviert Tunneladapter isatap.{AD21069D-D2AF-423E-BF59-0B1CD0D235E8}: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Microsoft-ISATAP-Adapter #2 Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja Tunneladapter 6TO4 Adapter: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Microsoft-6zu4-Adapter Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja route PRINT IPv4-Routentabelle =========================================================================== Aktive Routen: Netzwerkziel Netzwerkmaske Gateway Schnittstelle Metrik 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.18 10 127.0.0.0 255.0.0.0 Auf Verbindung 127.0.0.1 306 127.0.0.1 255.255.255.255 Auf Verbindung 127.0.0.1 306 127.255.255.255 255.255.255.255 Auf Verbindung 127.0.0.1 306 192.168.1.0 255.255.255.0 Auf Verbindung 192.168.1.18 266 192.168.1.18 255.255.255.255 Auf Verbindung 192.168.1.18 266 192.168.1.255 255.255.255.255 Auf Verbindung 192.168.1.18 266 224.0.0.0 240.0.0.0 Auf Verbindung 127.0.0.1 306 224.0.0.0 240.0.0.0 Auf Verbindung 192.168.1.18 266 255.255.255.255 255.255.255.255 Auf Verbindung 127.0.0.1 306 255.255.255.255 255.255.255.255 Auf Verbindung 192.168.1.18 266 =========================================================================== Stndige Routen: Keine

Read the article

axis2 web service behave differently when tested with web service client or with local test class

- by Stefano

Hello I need to update a facade to some web service proxy classes to a third party web service, and expose them as a service. This for two reason : to maintain the same interface for all application that need to use the system : actually its migrating and there are a few differences in the third party ws (method names); and to expose a simplified interface. The third party has provided me with a manual and some pregenerated proxy classes to their service (the java file says generated with axis2 1,4) . I've used netbeans 6.8 and the axis2 plugin to create an axis2 service . This service contains the proxy classes and the facade class which instantiate the web service proxy and calls its method; the facade class is exposed as service. I've used axis2 1.4 (at beginnig and later 1.5 ) and tomcat 6.0. The first test i did was to call the facede methods from inside the project itself and it worked. Then i've created a new project with a jax-ws web service client to call my class deployed on axis2. At this point has happened two strange thing : In the axis2 services page has appeared the third party proxy class as if it were a new service (if i try to get the wsdl axis raises an error ). eg. the proxy interface is named WebServiceAPI (_stub is the concrete class) and , after the first call to my service , i find a new "WebServicesAPI1272968932531_1" service inside axis . The call obvoiusly fail i've began to sniff soap messages with wireshark and i've found they differs when using proxy classes direclty from my facade test class by the messages created after being deployed on axis. i've noticed they differs for the presence of the soap header in the failing message. any help would be greatly appreciated : maybe i messed up something, there might be some incompatibilities or version mistakes? below i've added the signature of the third party proxy, its impementation and the different soap messages: /* * WebServicesAPI.java * This file was auto-generated from WSDL * by the Apache Axis2 version: 1.4 Built on : Apr 26, 2008 (06:24:30 EDT) */ package com.ibm.eci.wsapi; public interface WebServicesAPI { public com.ibm.eci.wsapi.ArrayOfstring getWorkItemHistory( java.lang.String stateKey,java.lang.String logonID,com.ibm.eci.wsapi.RepoItemHandle workItemHandle) throws java.rmi.RemoteException,com.ibm.eci.wsapi.ExceptionException0; ...etc the concrete class is : /** * WebServicesAPIStub.java * * This file was auto-generated from WSDL * by the Apache Axis2 version: 1.4 Built on : Apr 26, 2008 (06:24:30 EDT) */ package com.ibm.eci.wsapi; /* * WebServicesAPIStub java implementation */ public class WebServicesAPIStub extends org.apache.axis2.client.Stub implements WebServicesAPI{ protected org.apache.axis2.description.AxisOperation[] _operations; ... public com.ibm.eci.wsapi.ArrayOfstring getWorkItemHistory( java.lang.String stateKey297,java.lang.String logonID298,com.ibm.eci.wsapi.RepoItemHandle workItemHandle299) throws java.rmi.RemoteException ,com.ibm.eci.wsapi.ExceptionException0{ org.apache.axis2.context.MessageContext _messageContext = null; try{ org.apache.axis2.client.OperationClient _operationClient = _serviceClient.createClient(_operations[0].getName()); _operationClient.getOptions().setAction("\"\""); _operationClient.getOptions().setExceptionToBeThrownOnSOAPFault(true); addPropertyToOperationClient(_operationClient,org.apache.axis2.description.WSDL2Constants.ATTR_WHTTP_QUERY_PARAMETER_SEPARATOR,"&"); // create a message context _messageContext = new org.apache.axis2.context.MessageContext(); // create SOAP envelope with that payload org.apache.axiom.soap.SOAPEnvelope env = null; com.ibm.eci.wsapi.GetWorkItemHistoryE dummyWrappedType = null; env = toEnvelope(getFactory(_operationClient.getOptions().getSoapVersionURI()), stateKey297, logonID298, workItemHandle299, dummyWrappedType, optimizeContent(new javax.xml.namespace.QName("http://wsapi.eci.ibm.com", "getWorkItemHistory"))); //adding SOAP soap_headers _serviceClient.addHeadersToEnvelope(env); // set the message context with that soap envelope _messageContext.setEnvelope(env); // add the message contxt to the operation client _operationClient.addMessageContext(_messageContext); //execute the operation client _operationClient.execute(true); org.apache.axis2.context.MessageContext _returnMessageContext = _operationClient.getMessageContext( org.apache.axis2.wsdl.WSDLConstants.MESSAGE_LABEL_IN_VALUE); org.apache.axiom.soap.SOAPEnvelope _returnEnv = _returnMessageContext.getEnvelope(); java.lang.Object object = fromOM( _returnEnv.getBody().getFirstElement() , com.ibm.eci.wsapi.GetWorkItemHistoryResponseE.class, getEnvelopeNamespaces(_returnEnv)); return getGetWorkItemHistoryResponse_return((com.ibm.eci.wsapi.GetWorkItemHistoryResponseE)object); ... the failing soap message (generated by jax-ws client to the axis deployed service) is : POST /vbr_wsapi/services/WebServicesAPI.Endpoint HTTP/1.1 Content-Type: text/xml; charset=UTF-8 SOAPAction: "" User-Agent: Axis2 Host: n0611049:9083 Transfer-Encoding: chunked <?xml version='1.0' encoding='UTF-8'?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"> <soapenv:Header xmlns:wsa="http://www.w3.org/2005/08/addressing"> <wsa:To>http://n0611049:9083/vbr_wsapi/services/WebServicesAPI.Endpoint</wsa:To> <wsa:MessageID>urn:uuid:A31AD99897F9045E981272964443982</wsa:MessageID><wsa:Action>""</wsa:Action> </soapenv:Header> <soapenv:Body> <ns1:initializeProps xmlns:ns1="http://wsapi.eci.ibm.com"> <props><val>client.locale=it_IT</val> </props> </ns1:initializeProps> </soapenv:Body> </soapenv:Envelope> HTTP/1.1 500 Internal Server Error Content-Type: text/xml; charset=UTF-8 Content-Language: en-US Transfer-Encoding: chunked Connection: Close Date: Tue, 04 May 2010 09:16:15 GMT Server: WebSphere Application Server/7.0 <?xml version='1.0' encoding='UTF-8'?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"> <soapenv:Header xmlns:wsa="http://www.w3.org/2005/08/addressing"> <wsa:Action>http://www.w3.org/2005/08/addressing/fault</wsa:Action> <wsa:RelatesTo>urn:uuid:A31AD99897F9045E981272964443982</wsa:RelatesTo> <wsa:FaultDetail> <wsa:ProblemAction> <wsa:Action>""</wsa:Action> </wsa:ProblemAction> </wsa:FaultDetail> </soapenv:Header> <soapenv:Body> <soapenv:Fault xmlns:wsa="http://www.w3.org/2005/08/addressing"> <faultcode>wsa:ActionNotSupported</faultcode> <faultstring>The [action] cannot be processed at the receiver.</faultstring> <detail /> </soapenv:Fault> </soapenv:Body> </soapenv:Envelope> the succesful call (generated by my local test class, not being deployed to axis yet) : POST /vbr_wsapi/services/WebServicesAPI.Endpoint HTTP/1.1 Content-Type: text/xml; charset=UTF-8 SOAPAction: "" User-Agent: Axis2 Host: n0611049:9083 Transfer-Encoding: chunked <?xml version='1.0' encoding='UTF-8'?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"> <soapenv:Body> <ns1:initializeProps xmlns:ns1="http://wsapi.eci.ibm.com"> <props> <val>client.locale=it_IT</val> </props> </ns1:initializeProps> </soapenv:Body> </soapenv:Envelope> HTTP/1.1 200 OK Content-Type: text/xml; charset=UTF-8 Content-Language: en-US Transfer-Encoding: chunked Date: Tue, 04 May 2010 09:40:03 GMT Server: WebSphere Application Server/7.0 <?xml version='1.0' encoding='UTF-8'?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"> <soapenv:Body> <dlwmin:initializePropsResponse xmlns:dlwmin="http://wsapi.eci.ibm.com"> <return>e0e40cc51ceb0adf96c582bb6e047b3d0f</return> </dlwmin:initializePropsResponse> </soapenv:Body> </soapenv:Envelope> POST /vbr_wsapi/services/WebServicesAPI.Endpoint HTTP/1.1 Content-Type: text/xml; charset=UTF-8 SOAPAction: "" User-Agent: Axis2 Host: n0611049:9083 Transfer-Encoding: chunked <?xml version='1.0' encoding='UTF-8'?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"> <soapenv:Body> <ns1:logon xmlns:ns1="http://wsapi.eci.ibm.com"> <stateKey>e0e40cc51ceb0adf96c582bb6e047b3d0f</stateKey> <systemID>----</systemID> <authBundle> <password>-----</password> <sealed>false</sealed> <username>---</username> </authBundle> </ns1:logon> </soapenv:Body> </soapenv:Envelope> HTTP/1.1 200 OK Content-Type: text/xml; charset=UTF-8 Content-Language: en-US Transfer-Encoding: chunked Date: Tue, 04 May 2010 09:40:21 GMT Server: WebSphere Application Server/7.0 <?xml version='1.0' encoding='UTF-8'?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"> <soapenv:Body> <dlwmin:logonResponse xmlns:dlwmin="http://wsapi.eci.ibm.com"> <return>e0e40cc51ceb0adf96c582bb6e047b3d10</return> </dlwmin:logonResponse> </soapenv:Body> </soapenv:Envelope> ... goes on with other calls

Read the article

JBoss5: Cannot deploy due to java.util.zip.ZipException: error in opening zip file

- by Andreas

I have a web client and a EJB project, which I created with Eclipse 3.4. When I want to deploy it on Jboss 5.0.1, I receive the error below. I searched a lot but I wasn't able to find a solution to this. 18:21:21,899 INFO [ServerImpl] Starting JBoss (Microcontainer)... 18:21:21,900 INFO [ServerImpl] Release ID: JBoss [Morpheus] 5.0.1.GA (build: SVNTag=JBoss_5_0_1_GA date=200902231221) 18:21:21,900 INFO [ServerImpl] Bootstrap URL: null 18:21:21,900 INFO [ServerImpl] Home Dir: /Applications/jboss-5.0.1.GA 18:21:21,900 INFO [ServerImpl] Home URL: file:/Applications/jboss-5.0.1.GA/ 18:21:21,901 INFO [ServerImpl] Library URL: file:/Applications/jboss-5.0.1.GA/lib/ 18:21:21,901 INFO [ServerImpl] Patch URL: null 18:21:21,901 INFO [ServerImpl] Common Base URL: file:/Applications/jboss-5.0.1.GA/common/ 18:21:21,902 INFO [ServerImpl] Common Library URL: file:/Applications/jboss-5.0.1.GA/common/lib/ 18:21:21,902 INFO [ServerImpl] Server Name: default 18:21:21,902 INFO [ServerImpl] Server Base Dir: /Applications/jboss-5.0.1.GA/server 18:21:21,902 INFO [ServerImpl] Server Base URL: file:/Applications/jboss-5.0.1.GA/server/ 18:21:21,902 INFO [ServerImpl] Server Config URL: file:/Applications/jboss-5.0.1.GA/server/default/conf/ 18:21:21,902 INFO [ServerImpl] Server Home Dir: /Applications/jboss-5.0.1.GA/server/default 18:21:21,902 INFO [ServerImpl] Server Home URL: file:/Applications/jboss-5.0.1.GA/server/default/ 18:21:21,903 INFO [ServerImpl] Server Data Dir: /Applications/jboss-5.0.1.GA/server/default/data 18:21:21,903 INFO [ServerImpl] Server Library URL: file:/Applications/jboss-5.0.1.GA/server/default/lib/ 18:21:21,903 INFO [ServerImpl] Server Log Dir: /Applications/jboss-5.0.1.GA/server/default/log 18:21:21,903 INFO [ServerImpl] Server Native Dir: /Applications/jboss-5.0.1.GA/server/default/tmp/native 18:21:21,903 INFO [ServerImpl] Server Temp Dir: /Applications/jboss-5.0.1.GA/server/default/tmp 18:21:21,903 INFO [ServerImpl] Server Temp Deploy Dir: /Applications/jboss-5.0.1.GA/server/default/tmp/deploy 18:21:22,669 INFO [ServerImpl] Starting Microcontainer, bootstrapURL=file:/Applications/jboss-5.0.1.GA/server/default/conf/bootstrap.xml 18:21:23,535 INFO [VFSCacheFactory] Initializing VFSCache [org.jboss.virtual.plugins.cache.CombinedVFSCache] 18:21:23,541 INFO [VFSCacheFactory] Using VFSCache [CombinedVFSCache[real-cache: null]] 18:21:23,942 INFO [CopyMechanism] VFS temp dir: /Applications/jboss-5.0.1.GA/server/default/tmp 18:21:23,943 INFO [ZipEntryContext] VFS force nested jars copy-mode is enabled. 18:21:26,263 INFO [ServerInfo] Java version: 1.5.0_16,Apple Inc. 18:21:26,264 INFO [ServerInfo] Java Runtime: Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_16-b06-284) 18:21:26,264 INFO [ServerInfo] Java VM: Java HotSpot(TM) Server VM 1.5.0_16-133,Apple Inc. 18:21:26,264 INFO [ServerInfo] OS-System: Mac OS X 10.5.6,i386 18:21:26,336 INFO [JMXKernel] Legacy JMX core initialized 18:21:30,432 INFO [ProfileServiceImpl] Loading profile: default from: org.jboss.system.server.profileservice.repository.SerializableDeploymentRepository@e1d5d9(root=/Applications/jboss-5.0.1.GA/server, key=org.jboss.profileservice.spi.ProfileKey@143b82c3[domain=default,server=default,name=default]) 18:21:30,436 INFO [ProfileImpl] Using repository:org.jboss.system.server.profileservice.repository.SerializableDeploymentRepository@e1d5d9(root=/Applications/jboss-5.0.1.GA/server, key=org.jboss.profileservice.spi.ProfileKey@143b82c3[domain=default,server=default,name=default]) 18:21:30,436 INFO [ProfileServiceImpl] Loaded profile: ProfileImpl@ae002e{key=org.jboss.profileservice.spi.ProfileKey@143b82c3[domain=default,server=default,name=default]} 18:21:32,935 INFO [WebService] Using RMI server codebase: http://localhost:8083/ 18:21:42,572 INFO [NativeServerConfig] JBoss Web Services - Stack Native Core 18:21:42,573 INFO [NativeServerConfig] 3.0.5.GA 18:21:52,836 ERROR [AbstractKernelController] Error installing to ClassLoader: name=vfsfile:/Applications/jboss-5.0.1.GA/server/default/deploy/TwitterEAR.ear/ state=Describe mode=Manual requiredState=ClassLoader org.jboss.deployers.spi.DeploymentException: Error creating classloader for vfsfile:/Applications/jboss-5.0.1.GA/server/default/deploy/TwitterEAR.ear/ at org.jboss.deployers.spi.DeploymentException.rethrowAsDeploymentException(DeploymentException.java:49) at org.jboss.deployers.structure.spi.helpers.AbstractDeploymentContext.createClassLoader(AbstractDeploymentContext.java:576) at org.jboss.deployers.structure.spi.helpers.AbstractDeploymentUnit.createClassLoader(AbstractDeploymentUnit.java:159) at org.jboss.deployers.spi.deployer.helpers.AbstractClassLoaderDeployer.deploy(AbstractClassLoaderDeployer.java:53) at org.jboss.deployers.plugins.deployers.DeployerWrapper.deploy(DeployerWrapper.java:171) at org.jboss.deployers.plugins.deployers.DeployersImpl.doDeploy(DeployersImpl.java:1439) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1157) at org.jboss.deployers.plugins.deployers.DeployersImpl.install(DeployersImpl.java:1098) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:348) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:1598) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:934) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1062) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:984) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:822) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:553) at org.jboss.deployers.plugins.deployers.DeployersImpl.process(DeployersImpl.java:781) at org.jboss.deployers.plugins.main.MainDeployerImpl.process(MainDeployerImpl.java:698) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.loadProfile(ProfileServiceBootstrap.java:304) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootstrap.java:205) at org.jboss.bootstrap.AbstractServerImpl.start(AbstractServerImpl.java:405) at org.jboss.Main.boot(Main.java:209) at org.jboss.Main$1.run(Main.java:547) at java.lang.Thread.run(Thread.java:613) Caused by: java.lang.Error: Error visiting FileHandler@5567366[path=TwitterEAR.ear/TwitterPoCEJB.jar context=file:/Applications/jboss-5.0.1.GA/server/default/deploy/ real=file:/Applications/jboss-5.0.1.GA/server/default/deploy/TwitterEAR.ear/TwitterPoCEJB.jar/] at org.jboss.classloading.plugins.vfs.PackageVisitor.determineAllPackages(PackageVisitor.java:98) at org.jboss.deployers.vfs.plugins.classloader.VFSDeploymentClassLoaderPolicyModule.determineCapabilities(VFSDeploymentClassLoaderPolicyModule.java:108) at org.jboss.classloading.spi.dependency.Module.getCapabilities(Module.java:654) at org.jboss.classloading.spi.dependency.Module.determinePackageNames(Module.java:713) at org.jboss.classloading.spi.dependency.Module.getPackageNames(Module.java:698) at org.jboss.deployers.vfs.plugins.classloader.VFSDeploymentClassLoaderPolicyModule.determinePolicy(VFSDeploymentClassLoaderPolicyModule.java:129) at org.jboss.deployers.vfs.plugins.classloader.VFSDeploymentClassLoaderPolicyModule.determinePolicy(VFSDeploymentClassLoaderPolicyModule.java:48) at org.jboss.classloading.spi.dependency.policy.ClassLoaderPolicyModule.getPolicy(ClassLoaderPolicyModule.java:195) at org.jboss.deployers.vfs.plugins.classloader.VFSDeploymentClassLoaderPolicyModule.getPolicy(VFSDeploymentClassLoaderPolicyModule.java:122) at org.jboss.deployers.vfs.plugins.classloader.VFSDeploymentClassLoaderPolicyModule.getPolicy(VFSDeploymentClassLoaderPolicyModule.java:48) at org.jboss.classloading.spi.dependency.policy.ClassLoaderPolicyModule.registerClassLoaderPolicy(ClassLoaderPolicyModule.java:131) at org.jboss.deployers.plugins.classloading.AbstractLevelClassLoaderSystemDeployer.createClassLoader(AbstractLevelClassLoaderSystemDeployer.java:120) at org.jboss.deployers.structure.spi.helpers.AbstractDeploymentContext.createClassLoader(AbstractDeploymentContext.java:562) ... 21 more Caused by: java.lang.RuntimeException: java.util.zip.ZipException: error in opening zip file at org.jboss.virtual.plugins.context.AbstractExceptionHandler.handleZipEntriesInitException(AbstractExceptionHandler.java:39) at org.jboss.virtual.plugins.context.helpers.NamesExceptionHandler.handleZipEntriesInitException(NamesExceptionHandler.java:63) at org.jboss.virtual.plugins.context.zip.ZipEntryContext.ensureEntries(ZipEntryContext.java:610) at org.jboss.virtual.plugins.context.zip.ZipEntryContext.checkIfModified(ZipEntryContext.java:757) at org.jboss.virtual.plugins.context.zip.ZipEntryContext.getChildren(ZipEntryContext.java:829) at org.jboss.virtual.plugins.context.zip.ZipEntryHandler.getChildren(ZipEntryHandler.java:159) at org.jboss.virtual.plugins.context.DelegatingHandler.getChildren(DelegatingHandler.java:121) at org.jboss.virtual.plugins.context.AbstractVFSContext.getChildren(AbstractVFSContext.java:211) at org.jboss.virtual.plugins.context.AbstractVFSContext.visit(AbstractVFSContext.java:328) at org.jboss.virtual.plugins.context.AbstractVFSContext.visit(AbstractVFSContext.java:298) at org.jboss.virtual.VFS.visit(VFS.java:433) at org.jboss.virtual.VirtualFile.visit(VirtualFile.java:437) at org.jboss.virtual.VirtualFile.getChildren(VirtualFile.java:386) at org.jboss.virtual.VirtualFile.getChildren(VirtualFile.java:367) at org.jboss.classloading.plugins.vfs.PackageVisitor.visit(PackageVisitor.java:200) at org.jboss.virtual.plugins.vfs.helpers.WrappingVirtualFileHandlerVisitor.visit(WrappingVirtualFileHandlerVisitor.java:62) at org.jboss.virtual.plugins.context.AbstractVFSContext.visit(AbstractVFSContext.java:353) at org.jboss.virtual.plugins.context.AbstractVFSContext.visit(AbstractVFSContext.java:298) at org.jboss.virtual.VFS.visit(VFS.java:433) at org.jboss.virtual.VirtualFile.visit(VirtualFile.java:437) at org.jboss.classloading.plugins.vfs.PackageVisitor.determineAllPackages(PackageVisitor.java:94) ... 33 more Caused by: java.util.zip.ZipException: error in opening zip file at java.util.zip.ZipFile.open(Native Method) at java.util.zip.ZipFile.<init>(ZipFile.java:203) at java.util.zip.ZipFile.<init>(ZipFile.java:234) at org.jboss.virtual.plugins.context.zip.ZipFileWrapper.ensureZipFile(ZipFileWrapper.java:175) at org.jboss.virtual.plugins.context.zip.ZipFileWrapper.acquire(ZipFileWrapper.java:245) at org.jboss.virtual.plugins.context.zip.ZipEntryContext.initEntries(ZipEntryContext.java:470) at org.jboss.virtual.plugins.context.zip.ZipEntryContext.ensureEntries(ZipEntryContext.java:603) ... 51 more 18:21:56,772 INFO [JMXConnectorServerService] JMX Connector server: service:jmx:rmi://localhost/jndi/rmi://localhost:1090/jmxconnector 18:21:56,959 INFO [MailService] Mail Service bound to java:/Mail 18:21:59,450 WARN [JBossASSecurityMetadataStore] WARNING! POTENTIAL SECURITY RISK. It has been detected that the MessageSucker component which sucks messages from one node to another has not had its password changed from the installation default. Please see the JBoss Messaging user guide for instructions on how to do this. 18:21:59,489 WARN [AnnotationCreator] No ClassLoader provided, using TCCL: org.jboss.managed.api.annotation.ManagementComponent 18:21:59,789 INFO [TransactionManagerService] JBossTS Transaction Service (JTA version) - JBoss Inc. 18:21:59,789 INFO [TransactionManagerService] Setting up property manager MBean and JMX layer 18:22:00,040 INFO [TransactionManagerService] Initializing recovery manager 18:22:00,160 INFO [TransactionManagerService] Recovery manager configured 18:22:00,160 INFO [TransactionManagerService] Binding TransactionManager JNDI Reference 18:22:00,184 INFO [TransactionManagerService] Starting transaction recovery manager 18:22:01,243 INFO [Http11Protocol] Initializing Coyote HTTP/1.1 on http-localhost%2F127.0.0.1-8080 18:22:01,244 INFO [AjpProtocol] Initializing Coyote AJP/1.3 on ajp-localhost%2F127.0.0.1-8009 18:22:01,244 INFO [StandardService] Starting service jboss.web 18:22:01,247 INFO [StandardEngine] Starting Servlet Engine: JBoss Web/2.1.2.GA 18:22:01,336 INFO [Catalina] Server startup in 161 ms 18:22:01,360 INFO [TomcatDeployment] deploy, ctxPath=/invoker 18:22:02,014 INFO [TomcatDeployment] deploy, ctxPath=/web-console 18:22:02,459 INFO [TomcatDeployment] deploy, ctxPath=/jbossws 18:22:02,570 INFO [RARDeployment] Required license terms exist, view vfszip:/Applications/jboss-5.0.1.GA/server/default/deploy/jboss-local-jdbc.rar/META-INF/ra.xml 18:22:02,586 INFO [RARDeployment] Required license terms exist, view vfszip:/Applications/jboss-5.0.1.GA/server/default/deploy/jboss-xa-jdbc.rar/META-INF/ra.xml 18:22:02,645 INFO [RARDeployment] Required license terms exist, view vfszip:/Applications/jboss-5.0.1.GA/server/default/deploy/jms-ra.rar/META-INF/ra.xml 18:22:02,663 INFO [RARDeployment] Required license terms exist, view vfszip:/Applications/jboss-5.0.1.GA/server/default/deploy/mail-ra.rar/META-INF/ra.xml 18:22:02,705 INFO [RARDeployment] Required license terms exist, view vfszip:/Applications/jboss-5.0.1.GA/server/default/deploy/quartz-ra.rar/META-INF/ra.xml 18:22:02,801 INFO [SimpleThreadPool] Job execution threads will use class loader of thread: main 18:22:02,850 INFO [QuartzScheduler] Quartz Scheduler v.1.5.2 created. 18:22:02,857 INFO [RAMJobStore] RAMJobStore initialized. 18:22:02,858 INFO [StdSchedulerFactory] Quartz scheduler 'DefaultQuartzScheduler' initialized from default resource file in Quartz package: 'quartz.properties' 18:22:02,858 INFO [StdSchedulerFactory] Quartz scheduler version: 1.5.2 18:22:02,859 INFO [QuartzScheduler] Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED started. 18:22:03,888 INFO [ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=DefaultDS' to JNDI name 'java:DefaultDS' 18:22:04,530 INFO [ServerPeer] JBoss Messaging 1.4.1.GA server [0] started 18:22:04,624 INFO [QueueService] Queue[/queue/DLQ] started, fullSize=200000, pageSize=2000, downCacheSize=2000 18:22:04,632 WARN [ConnectionFactoryJNDIMapper] supportsFailover attribute is true on connection factory: jboss.messaging.connectionfactory:service=ClusteredConnectionFactory but post office is non clustered. So connection factory will *not* support failover 18:22:04,632 WARN [ConnectionFactoryJNDIMapper] supportsLoadBalancing attribute is true on connection factory: jboss.messaging.connectionfactory:service=ClusteredConnectionFactory but post office is non clustered. So connection factory will *not* support load balancing 18:22:04,742 INFO [ConnectionFactory] Connector bisocket://localhost:4457 has leasing enabled, lease period 10000 milliseconds 18:22:04,742 INFO [ConnectionFactory] org.jboss.jms.server.connectionfactory.ConnectionFactory@6af9ad started 18:22:04,746 INFO [QueueService] Queue[/queue/ExpiryQueue] started, fullSize=200000, pageSize=2000, downCacheSize=2000 18:22:04,747 INFO [ConnectionFactory] Connector bisocket://localhost:4457 has leasing enabled, lease period 10000 milliseconds 18:22:04,747 INFO [ConnectionFactory] org.jboss.jms.server.connectionfactory.ConnectionFactory@5ac953 started 18:22:04,750 INFO [ConnectionFactory] Connector bisocket://localhost:4457 has leasing enabled, lease period 10000 milliseconds 18:22:04,750 INFO [ConnectionFactory] org.jboss.jms.server.connectionfactory.ConnectionFactory@e8fa3a started 18:22:05,050 INFO [ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=ConnectionFactoryBinding,name=JmsXA' to JNDI name 'java:JmsXA' 18:22:05,073 INFO [TomcatDeployment] deploy, ctxPath=/ 18:22:05,178 INFO [TomcatDeployment] deploy, ctxPath=/jmx-console 18:22:05,290 ERROR [ProfileServiceBootstrap] Failed to load profile: Summary of incomplete deployments (SEE PREVIOUS ERRORS FOR DETAILS): DEPLOYMENTS IN ERROR: Deployment "vfsfile:/Applications/jboss-5.0.1.GA/server/default/deploy/TwitterEAR.ear/" is in error due to the following reason(s): java.util.zip.ZipException: error in opening zip file 18:22:05,301 INFO [Http11Protocol] Starting Coyote HTTP/1.1 on http-localhost%2F127.0.0.1-8080 18:22:05,364 INFO [AjpProtocol] Starting Coyote AJP/1.3 on ajp-localhost%2F127.0.0.1-8009 18:22:05,373 INFO [ServerImpl] JBoss (Microcontainer) [5.0.1.GA (build: SVNTag=JBoss_5_0_1_GA date=200902231221)] Started in 43s:467ms The mentioned ear and war file are both in the deploy directory. Does anybody have hints?

Search Results

Search found 3033 results on 122 pages for 'manual'.

Page 121/122 | < Previous Page | 117 118 119 120 121 122 | Next Page >

- by Tom O'Connor

- by michael

- by Oliver Salzburg

- by michael

- by Timo Huovinen

- by mseika

- by Rick Strahl

- by Rick Strahl

- by Thomas Weller

- by Varun Chatterji

- by jonathonc

- by Claus Jandausch

- by Rick Strahl

- by ScottGu

- by rchrd

- by skjagini

- by vikram.shukla(at)oracle.com

- by Petrus

- by SaveTheRbtz

- by qbn

- by Jona

- by algorithms

- by Stefano

- by Andreas

< Previous Page | 117 118 119 120 121 122 | Next Page >