Search Results

Search found 14641 results on 586 pages for 'postal address'.

Page 121/586 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

  • KVM-Guests can't get past bridge - no internet connection

    - by tmn29a
    I'm running a backported KVM on a Debian Squeeze. ATM the KVM-Guest can't connect to the internet through the bridge I have set up. The guests can reach each other, the host but nothing outside. I can neither ping, nslookup or do anything to a remote address. The guest are configured to have a static IP. When I didn;t have the bridge but a virtual bridge (the KVM-default) the guest could connect fine. After setting up the bridge things broke, so I think the problem lies there. # The loopback network interface auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.XXX.XXX.84 netmask 255.255.255.192 network 10.XXX.XXX.64 gateway 10.XXX.XXX.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports eth0 eth1 address 172.xxx.xxx.65 broadcast 172.xxx.xxx.127 netmask 255.255.255.192 gateway 172.xxx.xxx.65 bridge_stp on bridge_maxwait 0 Thanks in advance for your help !

    Read the article

  • IPV6 auto configuration not working

    - by Allan Ruin
    In Windows 7, my computer can automatically get a IPV6 global address and use IPV6 network, but in Ubuntu Natty, I can't find out how to let stateless configuration work. My network is a university campus network,so I don't need tunnels. I think if one thing can silently and successfully be accomplished in Windows, it shouldn't be impossible in linux. I tried manually editing /etc/network/interfaces and used a static IPV6 address, and I can use IPV6 this way, but I just want to use auto-configuration. I found this post: http://superuser.com/questions/33196/how-to-disable-autoconfiguration-on-ipv6-in-linux and tried sudo sysctl -w net.ipv6.conf.all.autoconf=1 sudo sysctl -w net.ipv6.conf.all.accept_ra=1 but without any luck. I got this in dmesg: root@natty-150:~# dmesg |grep IPv6 [ 26.239607] eth0: no IPv6 routers present [ 657.365194] eth0: no IPv6 routers present [ 719.101383] eth0: no IPv6 routers present [32864.604234] eth0: no IPv6 routers present [33267.619767] eth0: no IPv6 routers present [33341.507307] eth0: no IPv6 routers present I am not sure whether it matters,but then I setup a static IPv6 address (with gateway) and restart network,I ping6 ipv6.google.com and the ipv6 network is fine.This time a entry was added in dmesg [33971.214920] eth0: no IPv6 routers present So I guess the complain of no IPv6 router does not matter? Here is the ipv6 forwarding setting.But I guessed forwarding is used for radvd stuff? root@natty-150:/# cat /proc/sys/net/ipv6/conf/eth0/forwarding 0 After ajmitch mentioned forwarding setting, I added this to sysctl.conf file: net.ipv6.conf.all.autoconf = 1 net.ipv6.conf.all.accept_ra = 1 net.ipv6.conf.default.forwarding = 1 net.ipv6.conf.lo.forwarding = 1 net.ipv6.conf.eth0.forwarding = 1 and then ran sysctl -p /etc/init.d/networking restart But this still doesn't work.

    Read the article

  • Double default gateway ubuntu server

    - by Elena
    I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

    Read the article

  • What are the implications of expanding an internal subnet mask?

    - by Philip
    Our network is currently working on a 192.168.0.x subnet, all controlled through DHCP, except for the few main servers who have hard-configured IP address settings. What would I kill if I changed the DHCP-published subnet mask from 255.255.255.0 to 255.255.0.0? The reason for doing this is not because we have a huge sudden influx of machines, but because I'd like to start partitioning specific devices into specific IP ranges (to be neat and tidy). For what its worth, I don' plan on changing the allocated DHCP address range, but rather want to move some of the reserved and excluded DHCP addresses out of the address pool. e.g. printers will be 192.168.2.x I will obviously need to change the subnet mask manually on my manually configured devices.

    Read the article

  • IP tables gateway

    - by WojonsTech
    I am trying to make an iptables gateway. I ordered 3 dedicated server from my hosting company all with dual nics. One server has been given all the ip addresses and is connected directly to the internet and has its other nic connected to a switch where the other servers are all connected also. I want to setup iptables so for example the ip address 50.0.2.4 comes into my gateway server it fowards all the traffic to a private ip address using the second nic. This way the second nic can do what ever it needs and can respond back also. I also want it setup that if any of the other servers needs to download anything over the inernet it is able to do so and by using the same ip address that is used for its incomming traffic. Lastly I would like to be able to setup dns and other needed networking stuff that i maybe not thinking about.

    Read the article

  • Two group of name server records, where to put them?

    - by sazary
    I've registered my domain by a registrar that has very poor DNS management tools. I need to point from my registrar to another third-party DNS manager, and then from there point to the name servers of my host, along with some other DNS records (such as SPF records). What I've done now is this: I've given the address of the name servers of my third-party DNS manager to the DNS manager of my registrar, and then I've given the address of the name servers of my host to the third-party DNS manager, along with some SPF and MX records. Is this work correct? Or should I add the NS address of my host to my registrar DNS manager too? The problem is that my domain doesn't resolve to my host, and I see some strange records in some DNS servers around the world that I have not set!

    Read the article

  • sendmail rules for filtering spam

    - by user71061
    Hi! Can anyone help me with constructing sendmail rules for limiting spam? Assuming that name of my domain is my.domain.com, I want to use following rules: If BOTH sender and recipient address is from my.domain.com, message should be rejected (sendmail server only relays messages between my internal exchange server and outside word, so sending messages between users from my.domain.com always occour on exchange server and never on sendmail server) If recipient list contains AT LAST ONE invalid address, whole message should be rejected (even for valid recipients addresses) If sending server uses HELO message with bogus domain name (other than domain of this server), message should be rejected Any server attempting to send mail to dedicated address (f.e. [email protected]), should be automatically blacklisted Any other suggested rules ...

    Read the article

  • Cablemodem frequent connection loss

    - by LVDave
    I have a Linksys BEFCMU10 cablemodem and a WRT54GL router with Tomato 1.27 firmware on Cox cable. My question is this: I get what seems to be random disconnects from the internet, where the cable modem lights are still normal, but I can connect nowhere, either via a url or an ip address. At the same time these disconnects are happening, I can go to the router's Tomato management webpage, and release/renew my external IP address from Cox's DHCP server. I've had Cox look at the signal levels on the cable modem, and they say they look fine. What brings back the modem, for sometimes as long as 17 days, is several power-cycles of the modem. I don't understand the underlying cable modem technology too well, but I do know that if I'm able to release/renew the DHCP-provided WAN address, I'd expect that the cable modem was working ok... Anybody have any ideas??

    Read the article

  • resolv.conf doesn't get set on reboot when networking is configured for static ip

    - by kenneth koontz
    I'm experiencing, what appears to be a hostname resolution issue in ubuntu 12.04 server edition when configuring my computer to use a static ip. In /etc/network/interfaces: # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.28 netmask 255.255.255.0 gateway 192.168.1.1 Running $ sudo apt-get upgrade, results in a 'Failed to fetch...': . . . W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backports/universe/i18n/Translation-en_US Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backports/universe/i18n/Translation-en Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) E: Some index files failed to download. They have been ignored, or old ones used instead. When I change my /etc/network/interfaces to: auto eth0 iface eth0 inet dhcp Everything works fine. Looking into /etc/resolv.conf provides some more hints...In cases where I was getting the resolving issue, resolve.conf was empty. No nameservers were specified. When I changed to dhcp from static and restarted networking. /etc/resolv.conf gets written to: 'nameserver 192.168.1.1'. Switching back from dhcp to static and restarting doesn't remove the nameserve entry. When I restart the system with static set, resolv.conf is empty. When I restart the system with dhcp set, resolv.conf has nameserver 192.168.1.1. So it appears that the issue is that resolve.conf is not getting written to correctly? Which package/code is responsible for writing to resolv.conf? Is there a particular package that I can take a look at open issues? UPDATE: istream posted a good article discussing changes to resolve.conf in 12.04. http://www.stgraber.org/2012/02/24/dns-in-ubuntu-12-04/

    Read the article

  • Customizing post-commit messages in svn for different users

    - by Suresh
    I have an svn repository that users can access (read/write) using their account OR via tunneling over ssh with svnserve. I also have a post-commit hook that sends mails to specific users for different projects via svnnotify: the typical command is svnnotify <params> --to-regex-map <list of email IDs> <regex> For users who have accounts on the system, the notification email is sent from @machine.domain, which is fine. For users coming in via tunnelling, the email gets sent from @machine.domain, which is a fake address since these users don't have an account - the only reason I specify a tunnel-user id is to keep track of who made which update. So my question (finally) is: is there a way to pass a parameter (the "true" email address) to svnserve so that when the post-commit mail is sent, it can be sent "from" the correct email address ? p.s this is my first post here - if I haven't provided sufficient information, apologies: I'm happy to provide more details.

    Read the article

  • Unable to setup ssh tunnel on mac

    - by prashant
    On my office windows XP laptop I use a program called Bitvise Tunnelier to establish ssh tunnel to a in-house MySQL database. In the Tunnelier program I also need to provide address of corporate http proxy server in order to establish tunnel. On my personal mac laptop, I use Cisco Anywhere client to establish a VPN connection to my corporate network. But i'm unable to establish ssh tunnel to mysql database using ssh. How do I specify the proxy server address in the ssh command? As additional info when i'm using office laptop (whether in home or office) I can successfully ping to the server address specified in the Tunnelier program. But i cannot ping the same server using my mac machine (even after connecting via VPN). So basically i'm unable to understand what's going on and what steps i can take to debug this problem .

    Read the article

  • Why am I having DNS problems going through Network Solutions DNS to Amazon AWS?

    - by BestPractices
    Network Solutions appears to have an issue with AWS hostnames. This AWS ELB has been out there for months and is resolvable from every major DNS provider but network solutions. Any idea as to why? WORKING (4.2.2.2 DNS) $ nslookup testloadbalancer-1761726467.us-west-2.elb.amazonaws.com Server: 4.2.2.5 Address: 4.2.2.5#53 Non-authoritative answer: Name: testloadbalancer-1761726467.us-west-2.elb.amazonaws.com Address: 50.112.251.201 NOT WORKING (Network Solutions DNS) $ nslookup testloadbalancer-1761726467.us-west-2.elb.amazonaws.com ns1.worldnic.com Server: ns1.worldnic.com Address: 205.178.190.1#53 ** server can't find testloadbalancer-1761726467.us-west-2.elb.amazonaws.com.localhost: SERVFAIL

    Read the article

  • Red Hat cluster: Failure of one of two services sharing the same virtual IP tears down IP

    - by js01
    I'm creating a 2+1 failover cluster under Red Hat 5.5 with 4 services of which 2 have to run on the same node, sharing the same virtual IP address. One of the services on each node needs a (SAN) disk, the other doesn't. I'm using HA-LVM. When I shut down (via ifdown) the two interfaces connected to the SAN to simulate SAN failure, the service needing the disk is disabled, the other keeps running, as expected. Surprisingly (and unfortunately), the virtual IP address shared by the two services on the same machine is also removed, rendering the still-running service useless. How can I configure the cluster to keep the IP address up?

    Read the article

  • How to efficiently merge a lot of vCard files for the same person?

    - by mihi
    I currently have contact information at several places: old PDA's address book mobile phone's phone book (primarily name, phone number) email client's address book (primarily name, email) web mailer's address book (primarily name, email) instant messenger's contact list (primarily name, im, email, birthday) And there are several social or business networking sites on the Internet where contacts provide information about themselves, like LinkedIn or XING. All those sources can export as vCard, but as you might imagine, I get a lot of vCards for the very same contact that way. Are there any tools where I can import them and then merge them (it may ask me which phone number is more current in case of field clashes of course)? Bonus points if it can track which information I have discarded so when I re-export all information from one of the sources I can't import to (networking sites), it won't ask me again if I want to overwrite phone number of person X with the same ancient number... I hope you understand what I try to accomplish, if not just ask :-)

    Read the article

  • Static IPv4 and dynamic IPv6 on same interface

    - by Zsub
    I am trying to set up a CentOS 5.4 box to use a static IPv4 address, while getting a dynamic IPv6 address at boot time. I have only one interface, apart from the loopback interface, eth0. It has a static v4 and internet connectivity (I can SSH in). However, it doesn't get an IPv6 by default. I have enabled IPv6 in /etc/sysconfig/network and I have added IPV6INIT=yes to the config in /etc/sysconfig/networking/devices/. If I use dhcp6c it does get a valid IPv6 address, but the main question is how do I configure it to get one at boot-time?

    Read the article

  • BizTalk: mapping with Xslt

    - by Leonid Ganeline
    BizTalk Map Editor (Mapper) is a good editor, especially in the last 2010 version of the BizTalk. But still sometimes it cannot do the tasks easily. It is time for the Xslt code, It is time to remember that the maps are executed by the Xslt engine.  Right-click the Mapper Grid (a field between the source and target schemas) and choose Properties /Custom XSLT Path.  Input here a name of the file with Xslt code. Only this code will be executed, forget the picture in the Mapper, all those links and functoids.  Let’s see the real-life example. There are two source Addresses. One is on the top level and the second is inside the Member_Address record with MaxOccurs=* . The target address is placed inside the Locator record with MaxOccurs=*. The requirement is to map all source address to the one target address structure. The source Xml document looks like: The result Xml should be like this: Try to do this mapping with the Mapper and you will spent good amount of time and the result map would be tricky. If we use the Xslt code, the mapping will be simple and unambiguous, like this: Simple, elegant.

    Read the article

  • How to set up different documentroot for ip based requests, and different for domain based requests

    - by Carlos
    My problem is simply that I have a domain, let's say example.com, and my server's ip address is e.g. 192.168.0.1. I want to set up 2 different virtual hosts, so when user enters ip address (192.168.0.1) in his browser, he will see content from here: /var/www/staging But if user will type example.com, he will see content from here: /var/www I think it's possible but I was playing around with it and couldn't make it work. Also I don't want to make simple redirection. I know I can, but I need both of my apps (live & staging) working in root on the same server. I can't buy second domain, and I can't associate new ip address.

    Read the article

  • How to set up server/domain name correctly in hosts file with HTTPS

    - by Byakugan
    I am trying to do local network and I am using these kind of types of network. 1) Main server which connects to internet with static IP 2) Second computer connected to first one locally with address like 192.168.0.2 - when I write this address to address line it is like i wrote localhost in original main server - so it should show my local web browser etc ... It has domain name this IP and connected router for it ... example www.domain.com so I added to my main server hosts file (linux powered) lines like these: 192.168.0.2 domain.com www.domain.com It was working ok when I entered my domain name in local computer it showed my site ... But after some time I added HTTPS cerfiticate and added this line to my apatche server: Redirect permanent / https://www.domain.com/ And now it does not work even when i add something like this to my hosts file: 192.168.0.2 https://www.domain.com So any idea how do do this thing work? Thank you.

    Read the article

  • webmin bind issue- error when i try to start bind

    - by Arvind
    I am setting up a domain = mydomain.com with 2 nameservers ns1.mydomain.com and ns2.mydomain.com in Webmin - BIND. For this, I have registered 2 child nameservers at my domain registrar, and in Webmin-Bind I have set up a new zone for this domain. In this zone, i have specified 2 nameserver records- one each for ns1 and ns2. Also, I have defined 2 address records- one each for ns1.mydomain.com -> IP Address #1 and for ns2.mydomain.com -> IP Address #2 However when I try to start BIND in Webmin, I get the following error-- Failed to start BIND : Starting named: Error in named configuration: zone mydomain.com/IN: has no NS records zone mydomain.com/IN: not loaded due to errors. _default/mydomain.com/IN: bad zone [FAILED]

    Read the article

  • Problems Using CloudFlare On Blogger

    - by the_archer
    Here's the situation. I got a TLD for my blogger blog and set it up using the instructions from blogger. Blogger asks to: Add two CNAME records. For the first CNAME, where it says Name, Label or Host enter "www" and where it says Destination, Target orPoints To enter "ghs.google.com" . For the second CNAME, enter "NHRILA4K2RJG" as the Name and "gv-GQMUMYGHAMJWECXFLJXVXABIV23C55JIPNIAVD5IGFSXT653O5GA.domainverify.googlehosted.com." I did that on my domain host, and everything was working smoothly. Here's the things that happened: Typing myblog.blogspot.com in the address bar brought me to my new address www.mynewaddress.tld Typing my newaddress.tld brings me to www.mynewaddress.tld Now, I went through the instruction to setup CloudFlare and did everything as required. I saw that CloudFlare is active and working on my TLD www.mynewaddress.tld, however, when I am typing the blogspot address, i.e. myblog.blogspot.com, it's showing a notice that the blog is not hosted on blogger and that I should click "yes" to get redirected to the new website. However, the blog is still on blogger. I think the problem might be with this particular CNAME record Google asks to create, which I did not find imported to the CloudFlare nameservers: For the second CNAME, enter "NHRILA4K2RJG" as the Name and "gv-GQMUMYGHAMJWECXFLJXVXABIV23C55JIPNIAVD5IGFSXT653O5GA.domainverify.googlehosted.com." So I create that CNAME and added it to the CloudFlare panel. My question is - is that what will help Google determine that my blog is still hosted on Blogger? If so, should I turn off CloudFlare for that particular CNAME record or turn it on? Any help is very much appreciated :)

    Read the article

  • IPs on home network

    - by windchime
    I have a Linksys router and a Belkin wireless router at home. The Linksys router is connected to cable modem and two computers, as well as to the Belkin wireless router. A 3rd computer is connected to the Belkin router through Wifi. The IP addresses of the computers connected to Linksys are 192.168.1.101 and 192.168.1.102. The IP address of the Linksys router on LAN is 192.168.1.1. The IP address of the Belkin wireless router is 192.168.2.1(based on the 3rd computer's routing table) and the IP address of the 3rd computer is 192.168.2.5. If I ping 192.168.1.101 from 192.168.2.5, all are well. However, if I ping 192.168.2.5 from 192.168.1.101, Destination Host Unreachable. Why?

    Read the article

  • Apache port forwarding with ZTE ZXV10 W300 router (provider specific firmware)

    - by dannote
    I'm trying to configure port forwarding for Apache 2.2 installed on Windows XP SP3 with ZTE ZXV10 W300 router. The computer has a static IP 192.168.1.2. Port forwarding is configured as following: Enable true Name Apache Protocol TCP (also tried TCP and UPD) WAN Host Start IP Address empty WAN Host End IP Address empty WAN Connection stream WAN Start Port 8080 WAN End Port 8080 LAN Host IP Address 192.168.1.2 LAN Host Start Port 8080 LAN Host End Port 8080 Port 8080 is open for both TCP and UPD in Windows Brandmauer. Apache configuration: Listen 192.168.1.2:8080 Router Firmware: Hardware Version V1.0.01 Software Version V8.0.02T03_CFA Boot Loader Version V1.1.2 The provider is COMSTAR. I'm not sure but it's said they flash routers with modified firmware. I have also tried to set up Bitcomet port forwarding on port 13514 and failed.

    Read the article

  • Cisco ASA - Enable communication between same security level

    - by Conor
    I have recently inherited a network with a Cisco ASA (running version 8.2). I am trying to configure it to allow communication between two interfaces configured with the same security level (DMZ-DMZ) "same-security-traffic permit inter-interface" has been set, but hosts are unable to communicate between the interfaces. I am assuming that some NAT settings are causing my issue. Below is my running config: ASA Version 8.2(3) ! hostname asa enable password XXXXXXXX encrypted passwd XXXXXXXX encrypted names ! interface Ethernet0/0 switchport access vlan 400 ! interface Ethernet0/1 switchport access vlan 400 ! interface Ethernet0/2 switchport access vlan 420 ! interface Ethernet0/3 switchport access vlan 420 ! interface Ethernet0/4 switchport access vlan 450 ! interface Ethernet0/5 switchport access vlan 450 ! interface Ethernet0/6 switchport access vlan 500 ! interface Ethernet0/7 switchport access vlan 500 ! interface Vlan400 nameif outside security-level 0 ip address XX.XX.XX.10 255.255.255.248 ! interface Vlan420 nameif public security-level 20 ip address 192.168.20.1 255.255.255.0 ! interface Vlan450 nameif dmz security-level 50 ip address 192.168.10.1 255.255.255.0 ! interface Vlan500 nameif inside security-level 100 ip address 192.168.0.1 255.255.255.0 ! ftp mode passive clock timezone JST 9 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network DM_INLINE_NETWORK_1 network-object host XX.XX.XX.11 network-object host XX.XX.XX.13 object-group service ssh_2220 tcp port-object eq 2220 object-group service ssh_2251 tcp port-object eq 2251 object-group service ssh_2229 tcp port-object eq 2229 object-group service ssh_2210 tcp port-object eq 2210 object-group service DM_INLINE_TCP_1 tcp group-object ssh_2210 group-object ssh_2220 object-group service zabbix tcp port-object range 10050 10051 object-group service DM_INLINE_TCP_2 tcp port-object eq www group-object zabbix object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service http_8029 tcp port-object eq 8029 object-group network DM_INLINE_NETWORK_2 network-object host 192.168.20.10 network-object host 192.168.20.30 network-object host 192.168.20.60 object-group service imaps_993 tcp description Secure IMAP port-object eq 993 object-group service public_wifi_group description Service allowed on the Public Wifi Group. Allows Web and Email. service-object tcp-udp eq domain service-object tcp-udp eq www service-object tcp eq https service-object tcp-udp eq 993 service-object tcp eq imap4 service-object tcp eq 587 service-object tcp eq pop3 service-object tcp eq smtp access-list outside_access_in remark http traffic from outside access-list outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq www access-list outside_access_in remark ssh from outside to web1 access-list outside_access_in extended permit tcp any host XX.XX.XX.11 object-group ssh_2251 access-list outside_access_in remark ssh from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group ssh_2229 access-list outside_access_in remark http from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group http_8029 access-list outside_access_in remark ssh from outside to internal hosts access-list outside_access_in extended permit tcp any host XX.XX.XX.13 object-group DM_INLINE_TCP_1 access-list outside_access_in remark dns service to internal host access-list outside_access_in extended permit object-group TCPUDP any host XX.XX.XX.13 eq domain access-list dmz_access_in extended permit ip 192.168.10.0 255.255.255.0 any access-list dmz_access_in extended permit tcp any host 192.168.10.29 object-group DM_INLINE_TCP_2 access-list public_access_in remark Web access to DMZ websites access-list public_access_in extended permit object-group TCPUDP any object-group DM_INLINE_NETWORK_2 eq www access-list public_access_in remark General web access. (HTTP, DNS & ICMP and Email) access-list public_access_in extended permit object-group public_wifi_group any any pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu public 1500 mtu dmz 1500 mtu inside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 60 global (outside) 1 interface global (dmz) 2 interface nat (public) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 2229 192.168.0.29 2229 netmask 255.255.255.255 static (inside,outside) tcp interface 8029 192.168.0.29 www netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.13 192.168.10.10 netmask 255.255.255.255 dns static (dmz,outside) XX.XX.XX.11 192.168.10.30 netmask 255.255.255.255 dns static (dmz,inside) 192.168.0.29 192.168.10.29 netmask 255.255.255.255 static (dmz,public) 192.168.20.30 192.168.10.30 netmask 255.255.255.255 dns static (dmz,public) 192.168.20.10 192.168.10.10 netmask 255.255.255.255 dns static (inside,dmz) 192.168.10.0 192.168.0.0 netmask 255.255.255.0 dns access-group outside_access_in in interface outside access-group public_access_in in interface public access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 XX.XX.XX.9 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 20 console timeout 0 dhcpd dns 61.122.112.97 61.122.112.1 dhcpd auto_config outside ! dhcpd address 192.168.20.200-192.168.20.254 public dhcpd enable public ! dhcpd address 192.168.0.200-192.168.0.254 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 130.54.208.201 source public webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp !

    Read the article

  • Google Mail: Import labels when switching from POP3 to IMAP

    - by toobb
    My situation is the following: I have a Google Mail email-address and I have been using this address in Thunderbird fetching the emails with POP3 (the emails also remained on the server and where "archived"). In Thunderbird I organized my emails in folders. Now I want to switch to IMAP (with the same email address), but I want to keep the folder structure I created in Thunderbird. I could create a 2nd account in Thunderbird that uses IMAP, and then move my folders from the old account to the new one. But the problem is, that Google Mail probably does not recognize that it already has these moved emails in "All Mails". I will probably end up with two copies of every email. Does someone has good idea how to deal with that problem? Thank you!

    Read the article

  • Running scheduled web scripts in a Windows Server environment

    - by Dan Murfitt
    I'm trying to get a scheduled web script running on a Windows Server and so far the only way I've managed to automate this process is by using the Task Scheduler to open Internet Explorer with the web address as a parameter. I then need to create a separate task to run just after this task to close Internet Explorer (otherwise the task doesn't complete). Is there a better way of doing this? I've also managed to run the script by calling the web address through a Telnet connection to the web server (GET /web/address/here) but I haven't found a way of automating this process on a scheduled basis. Any ideas appreciated

    Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >