Search Results

Search found 6164 results on 247 pages for 'sd card'.

Page 121/247 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

• Slow, choppy video playback with nVidia 8600GT

  - by user5351

  I have an nVidia 8600GT card (made by EVGA) on a machine with Windows Vista (AMD Athlon X2 processors) and four gigs of ram. It runs pretty good, but I have had some slow/choppy/stuterring video playback issues whenever watching flash videos on Youtube or other sites. The problem is there with both Firefox and IE flash videos, but is maybe worse with Firefox. I also tried Linux with nVidia's binary drivers and it was about the same. I downloaded EVGA precision which allows me to control stuff like the fan and clock speed. The card's temp (in both Vista and Linux) is usually at 66C when idle (not playing a game or watching anything). It goes up a little when watching a video (maybe 68-72C). Any ideas on how to fix this? UPDATE: The issues are both with full screen and embedded flash videos. I have Flash 10.0.32.18 (always make sure I use most recent for security), and the CPU is an AMD Athlon 64 X2 Dual Core Processor 4000+ at 2.11 GHZ. The current GPU driver installed is the most recent GeForce one from last July.

  Read the article

• 85 Hz on old/new driver looks the same like 75 Hz on previous one?

  - by jon

  I have old philips 107T5 CRT and Nvidia graphics card. I used old Nvidia driver (but it wasn't 'legacy' one when I installed it) for few years but recently I decided to install other Linux distribution. I used 75 Hz refresh rate and 1024x768 resolution on my previous distribution. After I installed the new distribution I had to install a Nvidia driver so I downloaded one from the Nvidia site (this time only legacy supported my card so I downloaded legacy and installed it). It wasn't automatically updating xorg.conf but I had my previous xorg.conf copy and I used it. When I run X I could only choose 85 and 75 Hz, 85 was checked as default. And now what shocks me: that default 85 Hz looks identically like 75 Hz on previous driver looked (at least to me). I tried 75 Hz out of curiosity and it's too bright, hurts, etc. But on the previous driver 75 Hz wasn't hurting my eyes. Why is it different? It's the same number after all, so it should always give the same results, right? That's my first question. Second question: Is 85 Hz OK for that monitor model? Would it break it? I tried to find the optimal refresh rate for this model but couldn't find it.

  Read the article

• How to route between 2 networks with a server with 2 network cards?

  - by LumenAlbum

  This is the first time I am faced with routing and it seems I have hit a dead end. I have the following scenario: client1: 192.168.1.10 255.255.255.0 gateway: 192.168.1.100 DNS server: 192.168.1.100 client2: 192.168.1.20 255.255.255.0 gateway: 192.168.1.100 DNS server: 192.168.1.100 server (Windows Server 2008 R2 with enabled RAS & Routing Services) network card 1 (connected to a switch along with the clients) 192.168.1.100 255.255.255.0 DNS server: 127.0.0.1 network card 2 (connected to the router) 192.168.2.100 255.255.255.0 gateway: 192.168.2.1 DNS server: 127.0.0.1 (DNS forwarding to 192.168.2.1) ISP router (with connection to internet) 192.168.2.1 Now in this scenario I have tried to route traffic from the 192.168.1.0/24 network with the clients to the 192.168.2.0/24 network with the routers to connect them to the internet. However, no matter what I do I get no positive ping to the router 192.168.2.1. Ping from 192.168.168.1.10 to 192.168.1.20: Success to 192.168.1.100: Success to 192.168.2.100: Success to 192.168.2.1: not reachable The routing table contains the 2 routes 192.168.1.0 and 192.168.2.0 as directly connected. Does anyone know where the routing fails? I have searched different forums but mostly found nothing relevant. One post however pointed out that in a similar situation the problem was that the router doesn't know the way back and the internet router would need a static route back to the first router. If that really is the case, I take it there is no solution with my equipment, because the standart ISP router doesn't allow to set any static routes.

  Read the article

• Half of installed RAM is hardware reserved

  - by user968270

  After a rather arduous and convoluted series of problems that left me without a desktop for ~80 days, I've finally got the thing up and running, having replaced the power supply, motherboard, graphics card and CPU. Now, however, I'm experiencing the 'hardware reserved RAM' issue. Perhaps this is the exhaustion talking, but looking at the question that tends to get pointed to when this kind of topic gets locked as a duplicate hasn't helped. I have 16 GB of RAM installed in an MSi 970A-G46, which is spec'd for up to 32 GB of RAM. The BIOS recognizes that I have 16 GB installed, and the resource monitor also shows the whole 16 GB, only it shows 8 GB as hardware reserved. I've seen suggestions that it's an OS issue, but the particular installation of Windows 7 (64-bit) which I'm running on my boot drive is the same as the one that could actually access the 16 GB in my previous motherboard (MSi 870A-G54). I've updated my BIOS using the MSi Live Update tool and restarted the machine with no effect, and I cannot seem to locate any 'Memory Remapping' option as I've seen mentioned. I've physically swapped the RAM between the slots to no effect. I've unchecked the Maximum Memory box in the msconfig Boot tab's advanced options, also to no effect. These are my system's basic specifications OS: Windows 7 Home Premium (64-Bit) Motherboard: MSi 970A-G46 CPU: AMD FX-8150 Graphics Card: XFX Radeon HD 6870 Boot Drive: OCZ Agility 3 Storage Drive: Samsung Spinpoint F3 ST1000DM005/HD103SJ 1TB PSU: Thermaltake TR-2 TR600 600W ATX12V v2.3

  Read the article

• Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks.

  - by A302

  Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

  Read the article

• What switch should we use for PCoIP?

  - by Jay R.

  We have a small lab space that seats 10 people and has 20 machines. Each machine is set to 1920x1200 resolution because the user apps are best used at that resolution. Currently the machines are all located close enough to montors that a DisplayPort cable will reach, but the pending lab remodel positions them around 80 feet or more away in racks. Our proposed solution is to use PCoIP. We purchased 10 PCoIP portals and 20 PCoIP host cards. We plan to set up a dedicated network to handle just the PCoIP traffic. After testing just one portal and one host card with a cheap 1G switch from a local office supply store, we were left with less than good impressions about the usefulness in our lab. The framerates were not spectacular and the mouse seemed jerky. Our concern is that we can't get away with the cheap 1G stuff from the store because adding more machines to the switch will just make the user experience worse. What switch would be recommended to best support our PCoIP situation? We will need to plug in at least 30 cables based on just those machines. Is there a particular feature to search for that makes a difference? Is there a switch that works best with PCoIP? Added Info: The reporting webapp for the host card shows maximum bandwidth usage to be 220000 kbps. The average appears to be around 180000 kbps. The reverse direction is much lower, like 15000 kbps.

  Read the article

• Onboard Ethernet suddenly stopped working to router

  - by AfterschoolHobbist

  Hey guys, yesterday I have a sudden problem of my Ethernet connection to my router. My computer is a Pendium 4 with Window XP SP3 running on it and it was working fine earlier in the day, but yesterday night was the start of the problem. My computer is unable to ping to the router and to any other website and unable to get internet connection. As beside it was connected to a hub, I directly connected it to the router directly and the same problem occurred, being unable to ping to the router (and connecting to it) and still no internet access. My directly connected to the modem and the problem still persisted. For each connection, I connected it to my computer and my laptop and my laptop was able to connect, while my desktop computer was unable. I wondered if it was a OS issue and ran a live Ubuntu CD to see if Ubuntu was able to connect to the internet, but the issue persisted and I was unable to get internet access. I then set my router's lease time to 1 hour and waited. After 1 hour, the lease for my computer was removed and I hoped this worked, but it didn't work, but something strange is acting up. My desktop computer is still unable to ping to the router or connect to the internet, but for some reason, my router and desktop computer is still able to contact each other by providing a lease of an local ip address. The router record of a lease to my desktop computer, and when I do ipconfig, my desktop also recognize that it has been provided a local ip address. I have concluded that this is a hardware issue and the only solution to fix this is to by a network card adapter, but I am wondering if anyone has any solutions that could explain why this happen, why my mac address is 01-23-45-67-89-ab, and is there any way to fix it without buying a new network card? Thanks in advance.

  Read the article

• Getting dwl-g122 to work on ubuntu

  - by User1

  I have a USB WiFi adapter, D-Link dwl-g122. I'm running Ubuntu 10.4. My laptop has a built-in wireless card that is connecting fine to the router. I plug in the usb and it never really connects. Here are some details: iwconfig wlan1 IEEE 802.11bg ESSID:"\x0B\xE1..." Mode:Managed Frequency:2.457 GHz Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on lshw -c network: *-network:1 description: Wireless interface physical id: 3 logical name: wlan1 serial: 00:13:46:8b:xx:xx capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg dmesg [ 1096.814176] wlan1: direct probe to AP xxx (try 1) [ 1096.820960] wlan1: direct probe responded [ 1096.820969] wlan1: authenticate with AP xxx (try 1) [ 1096.823790] wlan1: authenticated [ 1096.823869] wlan1: associate with AP xxx (try 1) [ 1096.827667] wlan1: RX AssocResp from xxx (capab=0x411 status=0 aid=1) [ 1096.827674] wlan1: associated [ 1142.590912] wlan1: deauthenticating from xxx by local choice (reason=3) lsmod|rt2 rt2500usb 19643 0 rt2x00usb 11260 1 rt2500usb rt2x00lib 32133 2 rt2500usb,rt2x00usb mac80211 238896 3 ath5k,rt2x00usb,rt2x00lib cfg80211 148725 4 ath5k,ath,rt2x00lib,mac80211 led_class 3764 3 ath5k,rt2x00lib,sdhci It looks like the driver loads but it doesn't feel like connecting. The behavior is identical even if I blacklist the other wifi card (using an ath5k driver). It's almost like it is using the wrong password or something. Does anyone know what is happening? Is anyone using Ubuntu successful?

  Read the article

• Dropbox picture sync: Skip RAW files?

  - by Steven Lu

  I like the convenience of having Dropbox keep track of my photos because it tends to work with my devices over 3G (I am often tethering to my phone with my iPad and Macbook) as well as Wifi, but it's a waste of network traffic to sync the raw files from my camera or memory card. It clutters up the dropbox list and the files are just huge. Is there a way to configure the Dropbox client so that it ignores a certain file extension for the picture sync? Also, I suspect that if I just go and delete the raw files, that the next time I plug in the memory card and tell Dropbox to sync, it will re-download the raw files. Which would be terribad. I could switch to iCloud for Photo Stream, I suppose, but there will be no access via 3G that way. And I've already got years of experience with Dropbox so I know it's going to just work. I think any method that works for filtering files to exclude from sync on Dropbox in general should work here too. Edit: Wow there are 19k votes for this exact request.

  Read the article

• what are these weird IP address connections in resource monitor?

  - by bill

  I decided to check out Resource Monitor (on the 'Performance' tab in Task Manager, Windows 7) and I noticed in the "Network" section that the 'System' image name kept making a bunch (~5 at a time) of connections to random IP addresses, it would show anywhere from 1-500 bytes/sec 'sent'. They would stay connected for 1-2 minutes. -All web browsers are closed So, first thing I did was run a trace from network-tools.com on some of these IP addresses. 8/10 were outside of US and did not resolve to any host name. Of the 10 IP addresses I traced, 2 were in US, 4 showed origins in China, and one each to Algeria, Russia, Pakistan, Korea. (!) So, the next thing I did was turn off my wireless card, watch the connections disappear, then turn the card back on, and within 30 seconds more random connections were created by System, with different IP addresses from the first time. The next thing I did was go open Task Manager, Show Processes From All Users, then I killed just about everything that wasn't (what appeared to be) a windows process. Turned on wi-fi, and again within 30 seconds, random IP addresses connect for ~ 1 min at a time, new ones coming and going. I occasionally use bit torrent on this machine, but there was definitely no process that seemed related to bt running after I went through task manager, and bt wasn't open to begin with. So, any ideas on what these connections might be for? I have been using Ad-Aware Free and AVG Free on this computer for a while now, always up to date..

  Read the article

• nVidia performance with newer X and newer driver abysmal with Compiz

  - by Nakedible

  I recently upgraded Debian to Xorg 2.9.4 and installed nvidia-glx from experimental, version 260.19.21. This was somewhat of an uphill battle as the dependencies for the experimental nvidia-glx package are still somewhat broken. I got it to work without forcing the installation of any packages and without modifying the packages. However, after the upgrade compiz performance has been abysmal. I am using the desktop wall plugin and switching viewports is really slow - takes a few seconds for each switch. In addition to this, every effect that compiz does, such as zoom animations for icons when launching applications, takes seconds. The viewport switching speed changes relative to the amount of windows on that virtual screen - empty screens switch almost at normal speed, single browser windows work almost decently, but just 4 rxvt terminals slows the switches down to a crawl. My compiz configuration should be pretty basic. Xorg is likewise configured without anything special - the only "custom" configuration is forcing the driver name to be "nvidia". I've fiddled around with the nvidia-settings and compizconfig trying different VSync settings, but none of those helped. My graphics card is: NVIDIA GPU NVS 3100M (GT218) at PCI:1:0:0 (GPU-0). This is laptop GPU that is from the Geforce GTX 200 series. Graphics card performance should naturally be no problem. EDIT: In the end, nothing really worked, and I got really annoyed with the state of compiz and its support in Debian. Many nVidia driver revisions have passed and I am using Gnome 3 now, so I am accepting the best answers to this question even though the issue was not resolved.

  Read the article

• Disk operations in windows 7 are slow

  - by Skadlig

  My computer started lagging last Sunday. I tried to reboot it and it failed. Trying to boot into failsafe mode takes around two hours. It mainly freezes on two files: scsiport.sys and classpnp.sys When it finally has started all disc operations are really slow. When it has run for a while it goes faster, probably due to data moved into RAM instead. It froze on an other file before that was associated with Avast but uninstalling it didn't really help. A critical windows update was installed on Sunday but rolling back the update didn't help. I had a guess about the sound card but disabling the sound card drivers also didn’t help. I have an inkling of an idea that it might be Intel rapid storage technology that might be acting up but it doesn't allow me to reinstall it from failsafe mode and I haven't been able to log into normal mode for a while. I would appreciate suggestions regarding how to get into normal mode again and/or what can be the root cause.

  Read the article

• quad sli with gtx 690 not working

  - by Moaadh

  I have two cards GTX 690 (dual core). I did the Sli successfully. Nvidia control panel acknowledges the two cards as quad Sli. However, the problem is that Windows 7 64-bit Ultimate is showing me the graph memory size as 4 GB while it is supposed to be 8 GB because of the Sli. Also the benchmark from all software is giving me a very low score compared to some other guy's benchmark on YouTube. It gives me a big headache. Does anyone know why this is happening? If so, how can I get Windows 7 to recognize all 8 GB of memory? Thanks for your help in advance. My computer specifications: (Processor: Intel Core i7-3930k @3.2GHz(12CPUs))--- (Memory: 65536 MB Ram 1866 MHz)-- (OS: Windows 7 Ultimate 64-bit)-- (OCZ 240GB as SSD PCIe drive for booting and storage disk)-- (DirextX version: DirectX 11)-- (VGA Card: 2 X EVGA GTX 690 Dual GPU. Each GPU is 2 GB, so total memory should be 8 GB.)-- (MotherBoard: ASUS Rampage IV Extreme)-- Others with lesser specifications get a 2500 score in heaven benchmark while I get 1501 as if it is one card.

  Read the article

• Diff bios - corrupt video driver

  - by sfonck

  Hi, I'm using an Dell M90 Precision Laptop which has a NVidia Quadro FX 2500M graphics card and is running Windows XP. Laptop has been running fine - but a few weeks ago screen went 'white' - restarted computer- bios and startup screens show weird green dots and stripes, normal startup only shows a black screen... only VGA mode works to display something. I've been trying to remove and reinstall the correct drivers downloaded from Dell's website - no solution. I gave up and reinstalled XP - everything was working perfect again. 2 weeks later - again the white screen - tried everything again (flashin new bios also - nothing works) Reinstalled XP - everyhting was working again, so I made a DriveSnapShot of the partition. Today - again the 'white screen'. Ok, no problem ...I was thinking all I needed to do was to restore the DriveSnapShot backup... Few minutes later the backup is restored ... but guess what: video driver does not work correctly... As the DriveSnapShot restored the complete partition, as it was at the time everything was working perfectly, this would mean my driver problems are due to 'settings' in the bios or on the graphics-card itself + these 'settings' can get overridden by doing a new XP-install.... I'm out of options, can somebody help me to find a solution for this problem: Is there some way to backup and restore a bios after seeing some problems? Is there some way to know what is causing this problem like a bios diff utility? Thanks!

  Read the article

• How can I get DVDs playing after a Vista to XP change?

  - by Liath

  I replaced my vista install on a Dell Inspiron 1525 with XP and have managed to get most things up and running again however I'm having trouble with playing DVDs. When I try and play a DVD I get the following message: Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card. I have ensured that my drive is configured to play Region 2 discs (I'm in the UK), I've installed the most up to date XP codec pack which makes me think it's a driver issue. In device manager I have got my DVD drivers up to date however under "Other Devices" I'm missing several which sound key: Audio Device on High Definition Audio Bus Modem Device on High Definition Audio Bus Video Controller Video Controller (VGA Compatible) However I've installed all the relevant drivers I can find on the Dell website. The drive itself is working - I've run software from the drive. I'm afraid I am far from a sys-admin so I'm struggling on this one. How can I get my DVDs playing again?

  Read the article

• Google Chrome on Linux not using ALSA for sound

  - by DarkMoon

  On my laptop, I've got an .asoundrc file that outputs sound to my USB headset. This works fine for SMplayer and Firefox. However, Google Chrome (at least, Flash-based and HTML5-based videos and HTML5-based audio in Chrome) plays through the laptop speakers instead. I've tried running Chrome from a command-line, hoping there would be some helpful output, but no such luck. I've tried looking through Google for whether Chrome even uses ALSA, or if it uses something else, but I have been unsuccessful in this. This question seems to be the same issue, but no suggestion was made. Anyone have any ideas? I'm running Gentoo with a 3.10.17 kernel, 1.0.27 ALSA utils, 2.6.5 FVWM, and 36.0.1985.143 Chrome. If you need more info, please let me know. EDIT: I've configured the USB headset as the default ALSA device. Volume levels for both headset and onboard are set and un-muted using alsamixer. My .asoundrc file is as follows. ctl.!default { type hw card Headset } pcm.dmixer { type dmix ipc_key 1024 slave { pcm { type hw card Headset } period_size 1024 buffer_size 4096 } bindings { 0 0 1 1 } } pcm.!default { type plug slave.pcm dmixer }

  Read the article

• Server periodically freezing - Help Stabilizing

  - by JonDog

  We run an asp.net/sql server data collection website with a hand full of clients dumping data in and running reports. We moved to a new server (specs below) and have had issues with it freezing and having to reboot it a dozen times over the pass six months. The hosting company has mentioned possible causes (listed below) but cant give a definite answer on what is going wrong. They have offered to reconfigure how ever I like. We have benefited from having a much faster system and really dont want to get rid of the ssd's unless they are the issue. Two possible setup changes that I've talked with them about are also listed below. Any suggestions on what maybe causing the freezing issue as well as suggestion on a new setup would be great. My main questions are: Do SSD generally have problems running the OS & SQL Server on the same RAID Array? and Are the new SSD's still unrefined enough to be running in a production environment? Thanks Current: Xeon Quad Core E3-1270 3.40 Ghz 16 GB DDR3-1333 ECC SDRAM First Hard Drive: 120GB Intel SSD Second Hard Drive: 120GB Intel SSD Third Hard Drive: 120GB Intel SSD Fourth Hard Drive: 120GB Intel SSD SAS 4 Port RAID Card Windows 2012 Standard Edition - 64 Bit MSSQL 2008 Web Edition Possible Causes: Running Sql Server & OS on same RAID Array OS Software Issues Using SSD's CPU Underpowered Not enough RAM Option 1 2x Xeon Quad Core E5-2603 1.80 GHz 16 GB DDR3-1333 ECC SDRAM 1 x 240GB Intel SSD - OS 3 x 1 TB SATA HDD (7200 RPM) - SQL Server SATA 4 Port RAID Card Windows 2012 Standard Edition - 64 Bit Option 2 Dell PowerEdge E3-1270v2 3.5GHz 4 Cores 16 GB DDR3-1600 UDIMM 4 x 128 GB Samsung 840 Pro SSD Add-in H200 (SAS/SATA Controller), 4 Hard Drives - RAID 10 Windows 2012 Standard Edition - 64 Bit

  Read the article

• Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks

  - by A302

  Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

  Read the article

• Non-volatile cache RAID controllers: what kind of protection is there against NVCACHE failure?

  - by astrostl

  The battery back-up (BBU) model: admin enables write-back cache with BBU writes are cached to the RAID controller's RAM (major performance benefit) the battery saves uncommitted and cached data in the event of a power loss (reliability) If I lose power and come back within a day or so, my data should be both complete and uncorrupted. The downside to this is that, if the battery is dead or low, OR EVEN IF IT IS IN A RELEARN CYCLE (drain/charge loops to ensure the battery's health), the controller reverts to write-through mode and performance will suffer. What's more, the relearn cycles are usually automated on a schedule which may or may not happen in the middle of big traffic. So, that has to be manually disabled and manually scheduled for off-hours if it's a concern. Annoying either way. NV caches have capacitors with a sufficient charge to commit any uncommitted-to-disk data to flash. Not only is that more survivable in longer loss situations, but you don't have to concern yourself with battery death, wear-out, or relearning. All of that sounds great to me. What doesn't sound great to me is the prospect of that flash module having an issue, though. What if it's completely hosed? What if it's only partially hosed? A bit corrupted at the edges? Relearn cycles can tell when something like a simple battery is failing, but is there a similar process to verify that the flash is functional? I'm just far more trusting of a battery, warts and all. I know the card's RAM can fail, the card itself can fail - that's common territory, though. In case you didn't guess, yeah, I've experienced a shocking-to-me amount of flash/SSD/etc. failure :)

  Read the article

• How can I get DVDs playing after a Vista to XP change? [closed]

  - by Liath

  I replaced my vista install on a Dell Inspiron 1525 with XP and have managed to get most things up and running again however I'm having trouble with playing DVDs. When I try and play a DVD I get the following message: Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card. I have ensured that my drive is configured to play Region 2 discs (I'm in the UK), I've installed the most up to date XP codec pack which makes me think it's a driver issue. In device manager I have got my DVD drivers up to date however under "Other Devices" I'm missing several which sound key: Audio Device on High Definition Audio Bus Modem Device on High Definition Audio Bus Video Controller Video Controller (VGA Compatible) However I've installed all the relevant drivers I can find on the Dell website. The drive itself is working - I've run software from the drive. I'm afraid I am far from a sys-admin so I'm struggling on this one. How can I get my DVDs playing again?

  Read the article

• Verizon overbilling me ?

  - by bek

  I have verizon air card for my internet. Which is called vz manager. I have had it for about a year. Keeping within my usage allowance the whole time until 3 months ago, when my bill came in my 5,000 g allowance was ran to 18,000. It has continued to do so through the last 3 months. My usage reset itself yesterday for the new month. I got on google for about 5 minutes and chatted for about an hour yesterday online. Mind you that I have never done anything any different then i do everyday. I do not download music or watch videos on my computer, nothing like that. Well since last night a 8 pm my usage sayd 1109.525 gb. ALREADY! For being on the internet for an hour with no downloads. What could be causing this, please thrown me some ideas. Verizon is checking on the problem, but that usually doesnt get me the answer i want. Can someone be hacking my card and using internet through it, has told me that that is not possible, however I think with the internet anytihng is possible.

  Read the article

• VzAccess Manager.

  - by bek

  I have verizon air card for my internet. Which is called vz manager. I have had it for about a year. Keeping within my usage allowance the whole time until 3 months ago, when my bill came in my 5,000 g allowance was ran to 18,000. It has continued to do so through the last 3 months. My usage reset itself yesterday for the new month. I got on google for about 5 minutes and chatted for about an hour yesterday online. Mind you that I have never done anything any different then i do everyday. I do not download music or watch videos on my computer, nothing like that. Well since last night a 8 pm my usage sayd 1109.525 gb. ALREADY! For being on the internet for an hour with no downloads. What could be causing this, please thrown me some ideas. Verizon is checking on the problem, but that usually doesnt get me the answer i want. Can someone be hacking my card and using internet through it, has told me that that is not possible, however I think with the internet anytihng is possible.

  Read the article

• Duplicate monitor on highest resolution in Windows 7

  - by AlexanderMP

  I have a monitor with a native resolution of 2560x1440, connected through display port. I also have an AV Receiver connected to the video card via HDMI, to have surround sound in games. All using Radeon HD 5670 (will upgrade soon to HD 7850). The problem is that my computer detects the receiver as a separate monitor, with the highest available resolution of 1920x1080. I have 3 options: Disconnect the second display. But then the sound (digital audio output through video card) also disappears. Duplicate displays. But then my primary monitor resolution is reduced to a maximum of just 1920x1080, that being the maximum of the second monitor. Extend desktop. This is the solution I picked so far, it being the least evil. The problems I face in this situations are 2: I have a blank part of the desktop where I sometimes lose my mouse pointer, so I made the extension small, 640x480, and placed it in a corner; when I turn off the main display, all windows resize to 640x480. In Kubuntu I had the option to duplicate the displays, while keeping the higher resolution. Which was great. I tried overriding using the Win7 netbook hack, but it's not available on non-netbooks. Is there a similar solution for this problem in Windows 7?

  Read the article

• Randomly unusable wireless connection. Oddest issue ever...

  - by Hallucynogenyc

  I have two desktop computers a laptop and a smartphone. All of them connect perfectly to my router (WRT54GL with Tomato firmware), but randomly (once a week maybe) something odd happens: For over an hour or so one of the desktop computers (Windows 7 Pro x64) will just refuse to connect properly to the router. Only that computer and only to that network. I can connect all the other machines to the router perfectly and I can connect properly to other networks with that machine. What I mean by "not being able to connect properly" I mean that the OS will just tell me "not able to connect to.." or that it will connect but then say that it has no Internet access or it connects but will then take minutes to load any website, even the router web interface. I've tried to change from WPA2 to WEP and back to WPA2, I've tried different network adapters (one internal PCI card and one USB external card), removing networks from Windows and adding again... without making any difference. It works for some days but at the end, it ends happening at some time. I just have no clue on what the hell could be going on here. I first thought it was the network adapter, then the router, then Windows... Thanks in advance

  Read the article

• Computer crashes on resume from standby almost every time

  - by Los Frijoles

  I am running Ubuntu 12.04 on a Core i5 2500K and ASRock Z68 Pro3-M motherboard (no graphics card, hd is a WD Green 1TB, and cd drive is some cheap lite-on drive). Since installing 12.04, my computer has been freezing after resume, but not every time. When I start to resume, it starts going normally with a blinking cursor on the screen and then sometimes it will continue on to the gnome 3 unlock screen. Most of the time, however, it will blink for a little bit and then the monitor will flip modes and shut off due to no signal. Pressing keys on the keyboard gets no response (num lock light doesn't respond, Ctrl-Alt-F1 fails to drop it into a terminal, Ctrl-Alt-Backspace doesn't work) and so I assume the computer is crashed. The worst part is, the logs look entirely normal. Here is my system log during one of these crashes and my subsequent hard poweroff and restart: Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-2, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-2, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-1, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[12419]: inotify_add_watch(6, /dev/dm-0, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-0, 10) failed: No such file or directory Jun 6 22:09:01 kcuzner-desktop CRON[9061]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jun 6 22:17:01 kcuzner-desktop CRON[22142]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jun 6 22:39:01 kcuzner-desktop CRON[26909]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jun 6 22:54:21 kcuzner-desktop kernel: [57905.560822] show_signal_msg: 36 callbacks suppressed Jun 6 22:54:21 kcuzner-desktop kernel: [57905.560828] chromium-browse[9139]: segfault at 0 ip 00007f3a78efade0 sp 00007fff7e2d2c18 error 4 in chromium-browser[7f3a76604000+412b000] Jun 6 23:05:43 kcuzner-desktop kernel: [58586.415158] chromium-browse[21025]: segfault at 0 ip 00007f3a78efade0 sp 00007fff7e2d2c18 error 4 in chromium-browser[7f3a76604000+412b000] Jun 6 23:09:01 kcuzner-desktop CRON[13542]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jun 6 23:12:43 kcuzner-desktop kernel: [59006.317590] usb 2-1.7: USB disconnect, device number 8 Jun 6 23:12:43 kcuzner-desktop kernel: [59006.319672] sd 7:0:0:0: [sdg] Synchronizing SCSI cache Jun 6 23:12:43 kcuzner-desktop kernel: [59006.319737] sd 7:0:0:0: [sdg] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Jun 6 23:17:01 kcuzner-desktop CRON[26580]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jun 6 23:19:04 kcuzner-desktop acpid: client connected from 29925[0:0] Jun 6 23:19:04 kcuzner-desktop acpid: 1 client rule loaded Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30131 of process 30131 (n/a) owned by '104' high priority at nice level -11. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 1 threads of 1 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30162 of process 30131 (n/a) owned by '104' RT at priority 5. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 2 threads of 1 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30163 of process 30131 (n/a) owned by '104' RT at priority 5. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 3 threads of 1 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop bluetoothd[1140]: Endpoint registered: sender=:1.239 path=/MediaEndpoint/HFPAG Jun 6 23:19:07 kcuzner-desktop bluetoothd[1140]: Endpoint registered: sender=:1.239 path=/MediaEndpoint/A2DPSource Jun 6 23:19:07 kcuzner-desktop bluetoothd[1140]: Endpoint registered: sender=:1.239 path=/MediaEndpoint/A2DPSink Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30166 of process 30166 (n/a) owned by '104' high priority at nice level -11. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 4 threads of 2 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop pulseaudio[30166]: [pulseaudio] pid.c: Daemon already running. Jun 6 23:19:10 kcuzner-desktop acpid: client 2942[0:0] has disconnected Jun 6 23:19:10 kcuzner-desktop acpid: client 29925[0:0] has disconnected Jun 6 23:19:10 kcuzner-desktop acpid: client connected from 1286[0:0] Jun 6 23:19:10 kcuzner-desktop acpid: 1 client rule loaded Jun 6 23:19:31 kcuzner-desktop bluetoothd[1140]: Endpoint unregistered: sender=:1.239 path=/MediaEndpoint/HFPAG Jun 6 23:19:31 kcuzner-desktop bluetoothd[1140]: Endpoint unregistered: sender=:1.239 path=/MediaEndpoint/A2DPSource Jun 6 23:19:31 kcuzner-desktop bluetoothd[1140]: Endpoint unregistered: sender=:1.239 path=/MediaEndpoint/A2DPSink Jun 6 23:28:12 kcuzner-desktop kernel: imklog 5.8.6, log source = /proc/kmsg started. Jun 6 23:28:12 kcuzner-desktop rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="1053" x-info="http://www.rsyslog.com"] start Jun 6 23:28:12 kcuzner-desktop rsyslogd: rsyslogd's groupid changed to 103 Jun 6 23:28:12 kcuzner-desktop rsyslogd: rsyslogd's userid changed to 101 Jun 6 23:28:12 kcuzner-desktop rsyslogd-2039: Could not open output pipe '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Ericsson MBM Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Sierra Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Generic Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Huawei Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Linktop Jun 6 23:28:12 kcuzner-desktop bluetoothd[1072]: Failed to init gatt_example plugin Jun 6 23:28:12 kcuzner-desktop bluetoothd[1072]: Listening for HCI events on hci0 Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> NetworkManager (version 0.9.4.0) is starting... Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> Read config file /etc/NetworkManager/NetworkManager.conf Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> DNS: loaded plugin dnsmasq Jun 6 23:28:12 kcuzner-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuset Jun 6 23:28:12 kcuzner-desktop kernel: [ 0.000000] Initializing cgroup subsys cpu Sorry it's so huge; the restart happens at 23:28:12 I believe and all I see is that chromium segfaulted a few times. I wouldn't think a segfault from an individual program on the computer would crash it, but could that be the issue?

  Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >