Search Results

Search found 10013 results on 401 pages for 'self employment'.

Page 121/401 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• Shuttle FB51 mobo does not boot with external USB drive attached [closed]

  - by user127236

  I am repurposing an old Alienware desktop as a home media server. The PC is based on the Shuttle FB51 motherboard. The BIOS is a Phoenix Version 6.00 PG, release date 12/16/2002. I have loaded Ubuntu 12.04 LTS on the internal hard drive. I am using a Western Digital WD Elements 1.5 TB USB 2.0 Desktop External Hard Drive for media storage. When the external drive is plugged in and the PC is powered on, it freezes very early in the BIOS self-test, even before it begins the memory test. If I unplug the drive, the self-test proceeds without further problems. I can plug the USB drive back in when the self-test is complete, and Ubuntu will boot and find the external drive normally. I've tried several changes to the BIOS setup without finding a cure for the boot issue. Any assistance gratefully accepted. JGB

  Read the article

• Extract Certs from Apache

  - by user271619

  Recently I've had to uninstall a single Self-Signed SSL Certificate from one of my Apache boxes, specifically for an outside party. That's not really a problem for me, since it was easy. What confuses me is how they knew I had a self-signed certificate. The domain I provided them was not related to the domain with the self-signed certificate. Does this mean Apache publicizes the Virtual hosts in the httpd.conf file? I asked the outside party what software they used to extract information from my server, and they provided this GitHub link: https://gist.github.com/4ndrej/4547029 I figured I'd ask the community first, before I attempt installing the Java program.

  Read the article

• becomeFirstResponder not working!!!

  - by vikinara

  In the below code becomeFirstResonder not working, only resignFirstresponder working...can anyone please help - (BOOL)textFieldShouldReturn:(UITextField *)textField { if (textField == txtDate) { [txtDate resignFirstResponder]; [txtTime becomeFirstResponder]; } if (textField == txtTime) { [txtTime resignFirstResponder]; [txtAddress becomeFirstResponder]; } if (textField == txtAddress) { [txtAddress resignFirstResponder]; [txtCity becomeFirstResponder]; } if (textField == txtCity) { [txtCity resignFirstResponder]; [txtState becomeFirstResponder]; } if(textField == txtState) { [txtState resignFirstResponder]; [txtZip becomeFirstResponder]; } if (textField == txtZip) { [txtZip resignFirstResponder]; } return NO; } - (BOOL)textFieldShouldEndEditing:(UITextField *)textField { if(textField == txtDate) { NSString *dateString = txtDate.text; NSString *dateRegex = @"^(1[0-2]|0[1-9])/(3[01]|[12][0-9]|0[1-9])/[0-9]{4}$"; NSPredicate *dateTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", dateRegex]; BOOL validateDate = [dateTest evaluateWithObject:dateString]; if(!validateDate){ UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Date Error." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtDate.text = nil; } } if(textField == txtTime) { NSString *timeString = txtTime.text; NSString *timeRegex = @"^(([0]?[0-5][0-9]|[0-9]):([0-5][0-9]))$"; NSPredicate *timeTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", timeRegex]; BOOL validateTime = [timeTest evaluateWithObject:timeString]; if(!validateTime) { UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Incorrect Time Entry." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtTime.text = nil; } } if(textField == txtAddress) { NSString *addressString = txtAddress.text; NSString *addressRegex = @"^[a-z0-9 ]+$"; NSPredicate *addressTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", addressRegex]; BOOL validateAddress = [addressTest evaluateWithObject:addressString]; if(!validateAddress) { UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Incorrect State." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtAddress.text = nil; } } if(textField == txtState) { NSString *stateString = txtState.text; NSString *stateRegex = @"^(?-i:A[LKSZRAEP]|C[AOT]|D[EC]|F[LM]|G[AU]|HI|I[ADLN]|K[SY]|LA|M[ADEHINOPST]|N[CDEHJMVY]|O[HKR]|P[ARW]|RI|S[CD]|T[NX]|UT|V[AIT]|W[AIVY])$"; NSPredicate *stateTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", stateRegex]; BOOL validateState = [stateTest evaluateWithObject:stateString]; if(!validateState) { UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Incorrect State." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtState.text = nil; } } if(textField == txtCity) { NSString *cityString = txtCity.text; NSString *cityRegex = @"^[a-z ]+$"; NSPredicate *cityTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", cityRegex]; BOOL validateCity = [cityTest evaluateWithObject:cityString]; if(!validateCity) { UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Incorrect City." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtCity.text = nil; } } if(textField == txtZip) { NSString *zipString = txtZip.text; NSString *zipRegex = @"^[0-9]{5}([- /]?[0-9]{4})?$"; NSPredicate *zipTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", zipRegex]; BOOL validateZip = [zipTest evaluateWithObject:zipString]; if(!validateZip) { UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Incorrect Zip." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtZip.text = nil; } } return NO; }

  Read the article

• Act on click of a button on the Nav Bar for moreNavigationController -- Can't pushviewcontroller

  - by Jann

  Okay, here is my issue: My app has a display of categories in the tab bar at the bottom of the iPhoneOS screen. This only allows 5 categories before it presents the MORE button. I have over 25 (please do not answer this by saying: "Rethink your application...etc" -- that was rudely said before. They are food, drink, etc categories and cannot be changed). I want to allow the user to put their favorites on the home page. The Apple moreNavigationController editing system only allows 20 tab bar items to be rearranged due to space constraints on the editing page. This is not enough so i need to implement my own Editing screen. I set the rightBarButtonItem to nil and created my own. Using NSLog, i can see the "click" happens when clicking the EDIT button, but I cannot push using pushViewController. Nothing happens. I think it has something to do with the navigationController I am addressing...but i am not sure. ps: This all happens in my App Delegate which DOES act as both UITabBarControllerDelegate & UINavigationControllerDelegate. I tried to do the following: - ( void )navigationController:( UINavigationController * )navigationController_local willShowViewController:( UIViewController * )viewController_local animated:( BOOL )animated { UIViewController * currentController = navigationController_local.visibleViewController; UIViewController * nextController = viewController_local; // Do whatever here. NSLog(@"Nav contoller willShowViewController fired\n'%@'\n'%@'\nThere are currently: %d views on the stack\n",currentController,nextController,[self.navigationController.viewControllers count]); if ( [nextController isKindOfClass:NSClassFromString(@"UIMoreListController")]) { UINavigationBar *morenavbar = navigationController_local.navigationBar; UINavigationItem *morenavitem = morenavbar.topItem; morenavitem.rightBarButtonItem = nil; NSLog(@"Is a UIMoreListController\n"); UIBarButtonItem *editTabBarButton = [[UIBarButtonItem alloc] initWithTitle:@"Edit" style:UIBarButtonItemStylePlain target:self action:@selector(editTabBar:)]; morenavitem.rightBarButtonItem = editTabBarButton; [editTabBarButton release]; } } This works to place an EDIT button at the top right of the screen -- mimicking Apple's look and feel... but when that button is clicked, you cannot exit the darn moreNavigationController. I have tried many things. UIAlerts work, etc...but pushing (or popping -- even popping to root view) a view controller on the stack does not. - (void) editTabBar:(id)sender { NSLog(@"clicked edit tabbar\n"); NSLog(@"Total count of controllers: %d\n",[self.navigationController.viewControllers count]); TabBarViewController *tabBarViewController2 = [[TabBarViewController alloc] initWithNibName:@"TabBarView" bundle:nil]; tabBarViewController2.navigationItem.title=@"Edit Tab Bar"; [self.navigationController pushViewController:tabBarViewController2 animated:YES]; [tabBarViewController2 release]; NSLog(@"finished edit tabbar\n"); } If you click the edit button on the moreNavigationController's display page, you get the log entries like expected AND (this is strange) the views on the stack climbs -- but no page change occurs. I marked it down to not using the correct navigation controller...but I am lost on how to find which one TO use. this is a weird one too. In the edit function if i just do this: - (void) editTabBar:(id)sender { self.tabBarController.selectedIndex = 0; } It DOES take me home (to tabbarcontroller 0) BUT doing this: - (void) editTabBar:(id)sender { [self.navigationController popToRootViewControllerAnimated:YES]; } does not work. Does the moreNavigationController have some special quality that screws with the rest of the system?

  Read the article

• How to have two UIPickerViews together in one ViewController?

  - by 0SX

  I'm trying to put 2 UIPickerViews together in one ViewController. Each UIPickerView has different data arrays. I'm using interface builder to link the pickers up. I know I'll have to use separate delegates and dataSources but I can't seem to hook everything up with interface builder correctly. Here's all my code: pickerTesting.h #import <UIKit/UIKit.h> #import "picker2DataSource.h" @interface pickerTestingViewController : UIViewController <UIPickerViewDelegate, UIPickerViewDataSource>{ IBOutlet UIPickerView *picker; IBOutlet UIPickerView *picker2; NSMutableArray *pickerViewArray; } @property (nonatomic, retain) IBOutlet UIPickerView *picker; @property (nonatomic, retain) IBOutlet UIPickerView *picker2; @property (nonatomic, retain) NSMutableArray *pickerViewArray; @end pickerTesting.m #import "pickerTestingViewController.h" @implementation pickerTestingViewController @synthesize picker, picker2, pickerViewArray; - (void)viewDidLoad { [super viewDidLoad]; pickerViewArray = [[NSMutableArray alloc] init]; [pickerViewArray addObject:@" 100 "]; [pickerViewArray addObject:@" 200 "]; [pickerViewArray addObject:@" 400 "]; [pickerViewArray addObject:@" 600 "]; [pickerViewArray addObject:@" 1000 "]; [picker selectRow:1 inComponent:0 animated:NO]; picker2.delegate = self; picker2.dataSource = self; } - (NSInteger)numberOfComponentsInPickerView:(UIPickerView *)picker; { return 1; } - (void)pickerView:(UIPickerView *)picker didSelectRow:(NSInteger)row inComponent:(NSInteger)component { } - (NSInteger)pickerView:(UIPickerView *)picker numberOfRowsInComponent:(NSInteger)component; { return [pickerViewArray count]; } - (NSString *)pickerView:(UIPickerView *)picker titleForRow:(NSInteger)row forComponent:(NSInteger)component; { return [pickerViewArray objectAtIndex:row]; } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } - (void)viewDidUnload { // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } - (void)dealloc { [super dealloc]; } @end And I have a separate class for the other datasource. picker2DataSource.h @interface picker2DataSource : NSObject <UIPickerViewDataSource, UIPickerViewDelegate> { NSMutableArray *customPickerArray; } @property (nonatomic, retain) NSMutableArray *customPickerArray; @end picker2DataSource.m #import "picker2DataSource.h" @implementation picker2DataSource @synthesize customPickerArray; - (id)init { // use predetermined frame size self = [super init]; if (self) { customPickerArray = [[NSMutableArray alloc] init]; [customPickerArray addObject:@" a "]; [customPickerArray addObject:@" b "]; [customPickerArray addObject:@" c "]; [customPickerArray addObject:@" d "]; [customPickerArray addObject:@" e "]; } return self; } - (void)dealloc { [customPickerArray release]; [super dealloc]; } - (NSInteger)numberOfComponentsInPickerView:(UIPickerView *)picker2; { return 1; } - (void)pickerView:(UIPickerView *)picker2 didSelectRow:(NSInteger)row inComponent:(NSInteger)component { } - (NSInteger)pickerView:(UIPickerView *)picker2 numberOfRowsInComponent:(NSInteger)component; { return [customPickerArray count]; } - (NSString *)pickerView:(UIPickerView *)picker2 titleForRow:(NSInteger)row forComponent:(NSInteger)component; { return [customPickerArray objectAtIndex:row]; } @end Any help or code examples would be great. Thanks.

  Read the article

• uiscrollview not switching image subviews

  - by nickthedude

  I'm building a comic viewer app, that consists of two view controllers, the root viewcontroller basically displays a view where a user decides what comic they want to read by pressing a button. The second viewController actually displays the comic as a uiscrollview with a toolbar and a title at the top. So the problem I am having is that the comic image panels themselves are not changing from whatever the first comic you go to if you select another comic after viewing the first one. The way I set it up, and I admit it's not exactly mvc, so please don't hate, anyway the way I set it up is each comic uiscrollview consists of x number of jpg images where each comic set's image names have a common prefix and then a number like 'funny1.jpg', 'funny2.jpg', 'funny3.jpg' and 'soda1.jpg', 'soda2.jpg', 'soda3.jpg', etc... so when a user selects a comic to view in the root controller it makes a call to the delegate and sets ivars on instances of the comicviewcontroller that belongs to the delegate (mainDelegate.comicViewController.property) I set the number of panels in that comic, the comic name for the title label, and the image prefix. The number of images changes(or at least the number that you can scroll through), and the title changes but for some reason the images are the same ones as whatever comic you clicked on initially. I'm basing this whole app off of the 'scrolling' code sample from apple. I thought if I added a viewWillAppear:(BOOL) animated call to the comicViewController everytime the user clicked the button that would fix it but it didn't, after all that is where the scrollview is laid out. Anyway here is some code from each of the two controllers: RootController: -(IBAction) launchComic2{ AppDelegate *mainDelegate = [(AppDelegate *) [UIApplication sharedApplication] delegate]; mainDelegate.myViewController.comicPageCount = 3; mainDelegate.myViewController.comicTitle.text = @"\"Death by ETOH\""; mainDelegate.myViewController.comicImagePrefix = @"etoh"; [mainDelegate.myViewController viewWillAppear:YES]; [mainDelegate.window addSubview: mainDelegate.myViewController.view]; comicViewController: -(void) viewWillAppear:(BOOL)animated { self.view.backgroundColor = [UIColor viewFlipsideBackgroundColor]; // 1. setup the scrollview for multiple images and add it to the view controller // // note: the following can be done in Interface Builder, but we show this in code for clarity [scrollView1 setBackgroundColor:[UIColor whiteColor]]; [scrollView1 setCanCancelContentTouches:NO]; scrollView1.indicatorStyle = UIScrollViewIndicatorStyleWhite; scrollView1.clipsToBounds = YES; // default is NO, we want to restrict drawing within our scrollview scrollView1.scrollEnabled = YES; // pagingEnabled property default is NO, if set the scroller will stop or snap at each photo // if you want free-flowing scroll, don't set this property. scrollView1.pagingEnabled = YES; // load all the images from our bundle and add them to the scroll view NSUInteger i; for (i = 1; i <= self.comicPageCount; i++) { NSString *imageName = [NSString stringWithFormat:@"%@%d.jpg", self.comicImagePrefix, i]; NSLog(@"%@%d.jpg", self.comicImagePrefix, i); UIImage *image = [UIImage imageNamed:imageName]; UIImageView *imageView = [[UIImageView alloc] initWithImage:image]; // setup each frame to a default height and width, it will be properly placed when we call "updateScrollList" CGRect rect = imageView.frame; rect.size.height = kScrollObjHeight; rect.size.width = kScrollObjWidth; imageView.frame = rect; imageView.tag = i; // tag our images for later use when we place them in serial fashion [scrollView1 addSubview:imageView]; [imageView release]; } [self layoutScrollImages]; // now place the photos in serial layout within the scrollview } - (void)layoutScrollImages { UIImageView *view = nil; NSArray *subviews = [scrollView1 subviews]; // reposition all image subviews in a horizontal serial fashion CGFloat curXLoc = 0; for (view in subviews) { if ([view isKindOfClass:[UIImageView class]] && view.tag 0) { CGRect frame = view.frame; frame.origin = CGPointMake(curXLoc, 0); view.frame = frame; curXLoc += (kScrollObjWidth); } } // set the content size so it can be scrollable [scrollView1 setContentSize:CGSizeMake((self.comicPageCount * kScrollObjWidth), [scrollView1 bounds].size.height)]; } Any help would be appreciated on this. Nick

  Read the article

• Dynamic model choice field in django formset using multiple select elements

  - by Aryeh Leib Taurog

  I posted this question on the django-users list, but haven't had a reply there yet. I have models that look something like this: class ProductGroup(models.Model): name = models.CharField(max_length=10, primary_key=True) def __unicode__(self): return self.name class ProductRun(models.Model): date = models.DateField(primary_key=True) def __unicode__(self): return self.date.isoformat() class CatalogItem(models.Model): cid = models.CharField(max_length=25, primary_key=True) group = models.ForeignKey(ProductGroup) run = models.ForeignKey(ProductRun) pnumber = models.IntegerField() def __unicode__(self): return self.cid class Meta: unique_together = ('group', 'run', 'pnumber') class Transaction(models.Model): timestamp = models.DateTimeField() user = models.ForeignKey(User) item = models.ForeignKey(CatalogItem) quantity = models.IntegerField() price = models.FloatField() Let's say there are about 10 ProductGroups and 10-20 relevant ProductRuns at any given time. Each group has 20-200 distinct product numbers (pnumber), so there are at least a few thousand CatalogItems. I am working on formsets for the Transaction model. Instead of a single select menu with the several thousand CatalogItems for the ForeignKey field, I want to substitute three drop-down menus, for group, run, and pnumber, which uniquely identify the CatalogItem. I'd also like to limit the choices in the second two drop-downs to those runs and pnumbers which are available for the currently selected product group (I can update them via AJAX if the user changes the product group, but it's important that the initial page load as described without relying on AJAX). What's the best way to do this? As a point of departure, here's what I've tried/considered so far: My first approach was to exclude the item foreign key field from the form, add the substitute dropdowns by overriding the add_fields method of the formset, and then extract the data and populate the fields manually on the model instances before saving them. It's straightforward and pretty simple, but it's not very reusable and I don't think it is the right way to do this. My second approach was to create a new field which inherits both MultiValueField and ModelChoiceField, and a corresponding MultiWidget subclass. This seems like the right approach. As Malcolm Tredinnick put it in a django-users discussion, "the 'smarts' of a field lie in the Field class." The problem I'm having is when/where to fetch the lists of choices from the db. The code I have now does it in the Field's __init__, but that means I have to know which ProductGroup I'm dealing with before I can even define the Form class, since I have to instantiate the Field when I define the form. So I have a factory function which I call at the last minute from my view--after I know what CatalogItems I have and which product group they're in--to create form/formset classes and instantiate them. It works, but I wonder if there's a better way. After all, the field should be able to determine the correct choices much later on, once it knows its current value. Another problem is that my implementation limits the entire formset to transactions relating to (CatalogItems from) a single ProductGroup. A third possibility I'm entertaining is to put it all in the Widget class. Once I have the related model instance, or the cid, or whatever the widget is given, I can get the ProductGroup and construct the drop-downs. This would solve the issues with my second approach, but doesn't seem like the right approach.

  Read the article

• translating play in HTML to python

  - by aharon

  So, I'd like to represent one of Shakespeare's plays, Hamlet, into the following objects (maybe this isn't the best representation, if so please tell me): class Play(): acts = [] ... def add_act(self, act): acts.append(act) class Act(): scenes = [] ... def add_scene(self, scene): scenes.append(scene) class Scene(): elems = [] def __init__(self, title, setting=""): ... def add_elem(self, elem): elems.append(elem) ... class StageDirection(): # elem def __init__(self, text): ... class Line(): # elem def __init__(self, id, text, character = None): ... # A None character represents a continuation from the previous line # id could be, for example, 1.1.1 There are other methods, of course, for printing and such in each of the classes. The question is, how do I get a structure based on these classes (or something like them) from HTML 4 code that looks like this: <H3>ACT I</h3> <h3>SCENE I. Elsinore. A platform before the castle.</h3> <p><blockquote> <i>FRANCISCO at his post. Enter to him BERNARDO</i> </blockquote> <A NAME=speech1><b>BERNARDO</b></a> <blockquote> <A NAME=1.1.1>Who's there?</A><br> </blockquote> <A NAME=speech2><b>FRANCISCO</b></a> <blockquote> <A NAME=1.1.2>Nay, answer me: stand, and unfold yourself.</A><br> </blockquote> <A NAME=speech3><b>BERNARDO</b></a> <blockquote> <A NAME=1.1.3>Long live the king!</A><br> </blockquote> <A NAME=speech4><b>FRANCISCO</b></a> <blockquote> <A NAME=1.1.4>Bernardo?</A><br> </blockquote> <A NAME=speech5><b>BERNARDO</b></a> <blockquote> <A NAME=1.1.5>He.</A><br> </blockquote> <!-- for more, see the source of shakespeare.mit.edu/hamlet/full.html --> translating that into something like this: play = Play() actI = Act() sceneI = Scene("Scene I", "Elsinore. A platform before the castle.") sceneI.add_elem(StageDirection("Francisco at his post. Enter to him Bernardo.")) sceneI.add_elem(Line("Bernardo", "Who's there?")) ... Of course, I don't expect all the code—but what libraries and, when there aren't libraries, logic should I use? Thanks. (This is for a future opensource project and me learning Python for fun—not homework.)

  Read the article

• Core Plot causing crash on device but not simulator.

  - by Eric

  I'm using core plot to create a small plot in one of my view controllers. I have been pulling my hair out trying to track down this error. I install on the simulator and it works fine but as soon as I put it on my device I get the following error: 2010-02-04 22:15:37.394 Achieve[127:207] *** -[NSCFString drawAtPoint:withTextStyle:inContext:]: unrecognized selector sent to instance 0x108530 2010-02-04 22:15:37.411 Achieve[127:207] *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[NSCFString drawAtPoint:withTextStyle:inContext:]: unrecognized selector sent to instance 0x108530' 2010-02-04 22:15:37.427 Achieve[127:207] Stack: ( 843263261, 825818644, 843267069, 842763033, 842725440, 253481, 208187, 823956912, 823956516, 823956336, 823953488, 823952500, 823985628, 842717233, 843010887, 843009055, 860901832, 843738160, 843731504, 8797, 8692 ) terminate called after throwing an instance of 'NSException' Program received signal: “SIGABRT”. Debugger Output (as requested): #0 0x33b3db2c in __kill #1 0x33b3db20 in kill #2 0x33b3db14 in raise #3 0x33b54e3a in abort #4 0x33c5c398 in __gnu_cxx::__verbose_terminate_handler #5 0x313918a0 in _objc_terminate #6 0x33c59a8c in __cxxabiv1::__terminate #7 0x33c59b04 in std::terminate #8 0x33c59c2c in __cxa_throw #9 0x3138fe5c in objc_exception_throw #10 0x32433bfc in -[NSObject doesNotRecognizeSelector:] #11 0x323b8b18 in ___forwarding___ #12 0x323af840 in __forwarding_prep_0___ #13 0x0003de28 in -[CPTextLayer renderAsVectorInContext:] at CPTextLayer.m:117 #14 0x00032d3a in -[CPLayer drawInContext:] at CPLayer.m:146 #15 0x311c95b0 in -[CALayer _display] #16 0x311c9424 in -[CALayer display] #17 0x311c9370 in CALayerDisplayIfNeeded #18 0x311c8850 in CA::Context::commit_transaction #19 0x311c8474 in CA::Transaction::commit #20 0x311d05dc in CA::Transaction::observer_callback #21 0x323ad830 in __CFRunLoopDoObservers #22 0x323f5346 in CFRunLoopRunSpecific #23 0x323f4c1e in CFRunLoopRunInMode #24 0x335051c8 in GSEventRunModal #25 0x324a6c30 in -[UIApplication _run] #26 0x324a5230 in UIApplicationMain #27 0x0000225c in main at main.m:14 Here is my viewDidLoad method: - (void)viewDidLoad { [super viewDidLoad]; self.view.backgroundColor = [[UIColor alloc] initWithPatternImage:[UIImage imageNamed:@"bg.png"]]; [self loadData]; self.graph = [[CPXYGraph alloc] initWithFrame: self.plotView.frame]; CPLayerHostingView *hostingView = self.plotView; hostingView.hostedLayer = graph; graph.paddingLeft = 50; graph.paddingTop = 10; graph.paddingRight = 10; graph.paddingBottom = 10; percentFormatter = [[NSNumberFormatter alloc] init]; [percentFormatter setPercentSymbol:@"%"]; [percentFormatter setNumberStyle:NSNumberFormatterPercentStyle]; [percentFormatter setLocale: [NSLocale currentLocale]]; [percentFormatter setMultiplier:[NSNumber numberWithInt:1]]; [percentFormatter setMaximumFractionDigits:0]; CPXYPlotSpace *plotSpace = (CPXYPlotSpace *)graph.defaultPlotSpace; plotSpace.xRange = [CPPlotRange plotRangeWithLocation:CPDecimalFromFloat(0) length:CPDecimalFromFloat(maxX)]; plotSpace.yRange = [CPPlotRange plotRangeWithLocation:CPDecimalFromFloat(minY) length:CPDecimalFromFloat(maxY-minY)]; CPLineStyle *lineStyle = [[CPLineStyle lineStyle]retain]; lineStyle.lineColor = [CPColor grayColor]; lineStyle.lineWidth = 1.0f; CPTextStyle *whiteText = [CPTextStyle textStyle]; whiteText.color = [CPColor whiteColor]; CPXYAxisSet *axisSet = (CPXYAxisSet *)graph.axisSet; // axisSet.xAxis.majorIntervalLength = [[NSDecimalNumber decimalNumberWithString:@"0"]decimalValue]; axisSet.xAxis.minorTicksPerInterval = 0; axisSet.xAxis.majorTickLineStyle = nil; axisSet.xAxis.minorTickLineStyle = nil; axisSet.xAxis.axisLineStyle = lineStyle; axisSet.xAxis.minorTickLength = 0; axisSet.xAxis.majorTickLength = 0; axisSet.xAxis.labelFormatter = nil; axisSet.xAxis.labelTextStyle = nil; axisSet.yAxis.majorIntervalLength = [[NSDecimalNumber decimalNumberWithString:intY]decimalValue]; axisSet.yAxis.minorTicksPerInterval = 5; axisSet.yAxis.majorTickLineStyle = lineStyle; axisSet.yAxis.minorTickLineStyle = lineStyle; axisSet.yAxis.axisLineStyle = lineStyle; axisSet.yAxis.minorTickLength = 2.0f; axisSet.yAxis.majorTickLength = 4.0f; axisSet.yAxis.labelFormatter = percentFormatter; axisSet.yAxis.labelTextStyle = whiteText; CPScatterPlot *xSquaredPlot = [[[CPScatterPlot alloc]initWithFrame:graph.defaultPlotSpace.graph.bounds] autorelease]; xSquaredPlot.identifier = @"Plot"; xSquaredPlot.dataLineStyle.lineWidth = 4.0f; xSquaredPlot.dataLineStyle.lineColor = [CPColor yellowColor]; xSquaredPlot.dataSource = self; [graph addPlot:xSquaredPlot]; } Any help would be appreciated!

  Read the article

• Objective-C: Scope problems cellForRowAtIndexPath

  - by Mr. McPepperNuts

  How would I set each individual row in cellForRowAtIndexPath to the results of an array populated by a Fetch Request? (Fetch Request made when button is pressed.) - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { // ... set up cell code here ... cell.textLabel.text = [results objectAtIndex:indexPath valueForKey:@"name"]; } warning: 'NSArray' may not respond to '-objectAtIndexPath:' Edit: - (NSArray *)SearchDatabaseForText:(NSString *)passdTextToSearchFor{ NSManagedObject *searchObj; XYZAppDelegate *appDelegate = [[UIApplication sharedApplication] delegate]; NSManagedObjectContext *managedObjectContext = appDelegate.managedObjectContext; NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSPredicate *predicate = [NSPredicate predicateWithFormat:@"name contains [cd] %@", passdTextToSearchFor]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Entry" inManagedObjectContext:managedObjectContext]; NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:@"name" ascending:NO]; NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil]; [request setSortDescriptors:sortDescriptors]; [request setEntity: entity]; [request setPredicate: predicate]; NSError *error; results = [managedObjectContext executeFetchRequest:request error:&error]; // NSLog(@"results %@", results); if([results count] == 0){ NSLog(@"No results found"); searchObj = nil; self.tempString = @"No results found."; }else{ if ([[[results objectAtIndex:0] name] caseInsensitiveCompare:passdTextToSearchFor] == 0) { NSLog(@"results %@", [[results objectAtIndex:0] name]); searchObj = [results objectAtIndex:0]; }else{ NSLog(@"No results found"); self.tempString = @"No results found."; searchObj = nil; } } [tableView reloadData]; [request release]; [sortDescriptors release]; return results; } - (void)searchBarSearchButtonClicked:(UISearchBar *)searchBar{ textToSearchFor = mySearchBar.text; results = [self SearchDatabaseForText:textToSearchFor]; self.tempString = [myGlobalSearchObject valueForKey:@"name"]; NSLog(@"results count: %d", [results count]); NSLog(@"results 0: %@", [[results objectAtIndex:0] name]); NSLog(@"results 1: %@", [[results objectAtIndex:1] name]); } @end Console prints: 2010-06-10 16:11:18.581 XYZApp[10140:207] results count: 2 2010-06-10 16:11:18.581 XYZApp[10140:207] results 0: BB Bugs 2010-06-10 16:11:18.582 XYZApp[10140:207] results 1: BB Annie Program received signal: “EXC_BAD_ACCESS”. (gdb) Edit 2: BT: #0 0x95a91edb in objc_msgSend () #1 0x03b1fe20 in ?? () #2 0x0043cd2a in -[UITableViewRowData(UITableViewRowDataPrivate) _updateNumSections] () #3 0x0043ca9e in -[UITableViewRowData invalidateAllSections] () #4 0x002fc82f in -[UITableView(_UITableViewPrivate) _updateRowData] () #5 0x002f7313 in -[UITableView noteNumberOfRowsChanged] () #6 0x00301500 in -[UITableView reloadData] () #7 0x00008623 in -[SearchViewController SearchDatabaseForText:] (self=0x3d16190, _cmd=0xf02b, passdTextToSearchFor=0x3b29630) #8 0x000086ad in -[SearchViewController searchBarSearchButtonClicked:] (self=0x3d16190, _cmd=0x16492cc, searchBar=0x3d2dc50) #9 0x0047ac13 in -[UISearchBar(UISearchBarStatic) _searchFieldReturnPressed] () #10 0x0031094e in -[UIControl(Deprecated) sendAction:toTarget:forEvent:] () #11 0x00312f76 in -[UIControl(Internal) _sendActionsForEventMask:withEvent:] () #12 0x0032613b in -[UIFieldEditor webView:shouldInsertText:replacingDOMRange:givenAction:] () #13 0x01d5a72d in __invoking___ () #14 0x01d5a618 in -[NSInvocation invoke] () #15 0x0273fc0a in SendDelegateMessage () #16 0x033168bf in -[_WebSafeForwarder forwardInvocation:] () #17 0x01d7e6f4 in ___forwarding___ () #18 0x01d5a6c2 in __forwarding_prep_0___ () #19 0x03320fd4 in WebEditorClient::shouldInsertText () #20 0x0279dfed in WebCore::Editor::shouldInsertText () #21 0x027b67a5 in WebCore::Editor::insertParagraphSeparator () #22 0x0279d662 in WebCore::EventHandler::defaultTextInputEventHandler () #23 0x0276cee6 in WebCore::EventTargetNode::defaultEventHandler () #24 0x0276cb70 in WebCore::EventTargetNode::dispatchGenericEvent () #25 0x0276c611 in WebCore::EventTargetNode::dispatchEvent () #26 0x0279d327 in WebCore::EventHandler::handleTextInputEvent () #27 0x0279d229 in WebCore::Editor::insertText () #28 0x03320f4d in -[WebHTMLView(WebNSTextInputSupport) insertText:] () #29 0x0279d0b4 in -[WAKResponder tryToPerform:with:] () #30 0x03320a33 in -[WebView(WebViewEditingActions) _performResponderOperation:with:] () #31 0x03320990 in -[WebView(WebViewEditingActions) insertText:] () #32 0x00408231 in -[UIWebDocumentView insertText:] () #33 0x003ccd31 in -[UIKeyboardImpl acceptWord:firstDelete:addString:] () #34 0x003d2c8c in -[UIKeyboardImpl addInputString:fromVariantKey:] () #35 0x004d1a00 in -[UIKeyboardLayoutStar sendStringAction:forKey:] () #36 0x004d0285 in -[UIKeyboardLayoutStar handleHardwareKeyDownFromSimulator:] () #37 0x002b5bcb in -[UIApplication handleEvent:withNewEvent:] () #38 0x002b067f in -[UIApplication sendEvent:] () #39 0x002b7061 in _UIApplicationHandleEvent () #40 0x02542d59 in PurpleEventCallback () #41 0x01d55b80 in CFRunLoopRunSpecific () #42 0x01d54c48 in CFRunLoopRunInMode () #43 0x02541615 in GSEventRunModal () #44 0x025416da in GSEventRun () #45 0x002b7faf in UIApplicationMain () #46 0x00002578 in main (argc=1, argv=0xbfffef5c) at /Users/default/Documents/iPhone Projects/XYZApp/main.m:14

  Read the article

• Facebook Invalid OAuth access token signature trying to post an attachment to group wall from PHP

  - by Volodymyr B

  I am an administrator (manager role) of a Facebook Group. I created an app, and stored its id and secret. I want my app to be able to post something on the Facebook group's feed. But when I attempt to post, I get the error 190 Invalid OAuth access token signature, even though I able to successfully obtain the access_token with publish_stream and offline_access scopes. It has the form of NNNNNNNNNNNNNNN|XXXXXXXXXXXXXXXXXXXXXXXXXXX, where N is a number (15) and X is a letter or a number (27). What should I do more to get this accomplished? Here is the code I am using: public static function postToFB($message, $image, $link) { //Get App Token $token = self::getFacebookToken(); // Create FB Object Instance $facebook = new Facebook(array( 'appId' => self::fb_appid, 'secret' => self::fb_secret, 'cookie' => true )); //$token = $facebook->getAccessToken(); //Try to Publish on wall or catch the Facebook exception try { $attachment = array('access_token' => $token, 'message' => $message, 'picture' => $image, 'link' => $link, //'name' => '', //'caption' => '', 'description' => 'More...', //'actions' => array(array('name' => 'Action Text', 'link' => 'http://apps.facebook.com/xxxxxx/')) ); $result = $facebook->api('/'.self::fb_groupid.'/feed/', 'post', $attachment); } catch (FacebookApiException $e) { //If the post is not published, print error details echo '<pre>'; print_r($e); echo '</pre>'; } } Code which returns the token //Function to Get Access Token public static function getFacebookToken($appid = self::fb_appid, $appsecret = self::fb_secret) { $args = array( 'grant_type' => 'client_credentials', 'client_id' => $appid, 'client_secret' => $appsecret, 'redirect_uri' => 'https://www.facebook.com/connect/login_success.html', 'scope' => 'publish_stream,offline_access' ); $ch = curl_init(); $url = 'https://graph.facebook.com/oauth/access_token'; curl_setopt($ch, CURLOPT_URL, $url); curl_setopt($ch, CURLOPT_HEADER, false); curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); curl_setopt($ch, CURLOPT_POST, true); curl_setopt($ch, CURLOPT_POSTFIELDS, $args); try { $data = curl_exec($ch); } catch (Exception $exc) { error_log($exc->getMessage()); } return json_encode($data); } If I uncomment $token = $facebook->getAccessToken(); in the posting code, it gives me yet another error (#200) The user hasn't authorized the application to perform this action. The token I get using developers.facebook.com/tools/explorer/ is of another form, much longer and with it I am able to post to the group page feed. How do I do it without copy/paste from Graph API Explorer and how do I post as a group instead of posting as a user? Thanks.

  Read the article

• data not reloading into tableview from core data on minor update

  - by Martin KS

  I've got a basic photo album application, on the first view a list of albums is displayed with a subtitle showing how many images are in each album. I've got everything working to add albums, and add images to albums. The problem is that the image count lines are accurate whenever the app loads, but I can't get them to update during execution. The following viewdidload correctly populates all lines of the tableview when the app loads: - (void)viewDidLoad { [super viewDidLoad]; // Set the title. self.title = @"Photo albums"; // Configure the add and edit buttons. self.navigationItem.leftBarButtonItem = self.editButtonItem; addButton = [[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemAdd target:self action:@selector(addAlbum)]; addButton.enabled = YES; self.navigationItem.rightBarButtonItem = addButton; /* Fetch existing albums. Create a fetch request; find the Album entity and assign it to the request; add a sort descriptor; then execute the fetch. */ NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Album" inManagedObjectContext:managedObjectContext]; [request setEntity:entity]; // Order the albums by name. NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:@"albumName" ascending:NO]; NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil]; [request setSortDescriptors:sortDescriptors]; [sortDescriptor release]; [sortDescriptors release]; // Execute the fetch -- create a mutable copy of the result. NSError *error = nil; NSMutableArray *mutableFetchResults = [[managedObjectContext executeFetchRequest:request error:&error] mutableCopy]; if (mutableFetchResults == nil) { // Handle the error. } LocationsAppDelegate *mainDelegate = (LocationsAppDelegate *)[[UIApplication sharedApplication] delegate]; // Set master albums array to the mutable array, then clean up. [mainDelegate setAlbumsArray:mutableFetchResults]; [mutableFetchResults release]; [request release]; } But when I run similar code inside viewdidappear, nothing happens: { /* Fetch existing albums. Create a fetch request; find the Album entity and assign it to the request; add a sort descriptor; then execute the fetch. */ NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Album" inManagedObjectContext:managedObjectContext]; [request setEntity:entity]; // Order the albums by creation date, most recent first. NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:@"albumName" ascending:NO]; NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil]; [request setSortDescriptors:sortDescriptors]; [sortDescriptor release]; [sortDescriptors release]; // Execute the fetch -- create a mutable copy of the result. NSError *error = nil; NSMutableArray *mutableFetchResults = [[managedObjectContext executeFetchRequest:request error:&error] mutableCopy]; if (mutableFetchResults == nil) { // Handle the error. } LocationsAppDelegate *mainDelegate = (LocationsAppDelegate *)[[UIApplication sharedApplication] delegate]; // Set master albums array to the mutable array, then clean up. [mainDelegate setAlbumsArray:mutableFetchResults]; [self.tableView reloadData]; [mutableFetchResults release]; [request release]; } Apologies if I've missed the answer to this question elsewhere, but what am I missing?

  Read the article

• All UITableCells rendered at once... why?

  - by Greg

  I'm extremely confused by the proper behavior of UITableView cell rendering. Here's the situation: I have a list of 250 items that are loading into a table view, each with an image. To optimize the image download, I followed along with Apple's LazyTableImages sample code... pretty much following it exactly. Really good system... for reference, here's the cell renderer within the Apple sample code: - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { // customize the appearance of table view cells // static NSString *CellIdentifier = @"LazyTableCell"; static NSString *PlaceholderCellIdentifier = @"PlaceholderCell"; // add a placeholder cell while waiting on table data int nodeCount = [self.entries count]; if (nodeCount == 0 && indexPath.row == 0) { UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:PlaceholderCellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleSubtitle reuseIdentifier:PlaceholderCellIdentifier] autorelease]; cell.detailTextLabel.textAlignment = UITextAlignmentCenter; cell.selectionStyle = UITableViewCellSelectionStyleNone; } cell.detailTextLabel.text = @"Loading…"; return cell; } UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleSubtitle reuseIdentifier:CellIdentifier] autorelease]; cell.selectionStyle = UITableViewCellSelectionStyleNone; } // Leave cells empty if there's no data yet if (nodeCount > 0) { // Set up the cell... AppRecord *appRecord = [self.entries objectAtIndex:indexPath.row]; cell.textLabel.text = appRecord.appName; cell.detailTextLabel.text = appRecord.artist; // Only load cached images; defer new downloads until scrolling ends if (!appRecord.appIcon) { if (self.tableView.dragging == NO && self.tableView.decelerating == NO) { [self startIconDownload:appRecord forIndexPath:indexPath]; } // if a download is deferred or in progress, return a placeholder image cell.imageView.image = [UIImage imageNamed:@"Placeholder.png"]; } else { cell.imageView.image = appRecord.appIcon; } } return cell; } So – my implementation of Apple's LazyTableImages system has one crucial flaw: it starts all downloads for all images immediately. Now, if I remove this line: //[self startIconDownload:appRecord forIndexPath:indexPath]; Then the system behaves exactly like you would expect: new images load as their placeholders scroll into view. However, the initial view cells do not automatically load their images without that prompt in the cell renderer. So, I have a problem: with the prompt in the cell renderer, all images load at once. Without the prompt, the initial view doesn't load. Now, this works fine in Apple sample code, which got me wondering what was going on with mine. It's almost like it was building all cells up front rather than just the 8 or so that would appear within the display. So, I got looking into it, and this is indeed the case... my table is building 250 unique cells! I didn't think the UITableView worked like this, I guess I thought it only built as many items as were needed to populate the table. Is this the case, or is it correct that it would build all 250 cells up front? Also – related question: I've tried to compare my implementation against the Apple LazyTableImages sample, but have discovered that NSLog appears to be disabled within the Apple sample code (which makes direct behavior comparisons extremely difficult). Is that just a simple publish setting somewhere, or has Apple somehow locked down their samples so that you can't log output at runtime? Thanks!

  Read the article

• "didChangeSection:" NSfetchedResultsController delegate method not being called

  - by robenk

  I have a standard split view controller, with a detail view and a table view. Pressing a button in the detail view can cause the an object to change its placement in the table view's ordering. This works fine, as long as the resulting ordering change doesn't result in a section being added or removed. I.e. an object can change it's ordering in a section or switch from one section to another. Those ordering changes work correctly without problems. But, if the object tries to move to a section that doesn't exist yet, or is the last object to leave a section (therefore requiring the section its leaving to be removed), then the application crashes. NSFetchedResultsControllerDelegate has methods to handle sections being added and removed that should be called in those cases. But those delegate methods aren't being called for some reason. The code in question, is boilerplate: - (void)controllerWillChangeContent:(NSFetchedResultsController *)controller { NSLog(@"willChangeContent"); [self.tableView beginUpdates]; } - (void)controller:(NSFetchedResultsController *)controller didChangeSection:(id <NSFetchedResultsSectionInfo>)sectionInfo atIndex:(NSUInteger)sectionIndex forChangeType:(NSFetchedResultsChangeType)type { NSLog(@"didChangeSection"); switch(type) { case NSFetchedResultsChangeInsert: [self.tableView insertSections:[NSIndexSet indexSetWithIndex:sectionIndex] withRowAnimation:UITableViewRowAnimationFade]; break; case NSFetchedResultsChangeDelete: [self.tableView deleteSections:[NSIndexSet indexSetWithIndex:sectionIndex] withRowAnimation:UITableViewRowAnimationFade]; break; } } - (void)controller:(NSFetchedResultsController *)controller didChangeObject:(id)anObject atIndexPath:(NSIndexPath *)indexPath forChangeType:(NSFetchedResultsChangeType)type newIndexPath:(NSIndexPath *)newIndexPath { NSLog(@"didChangeObject"); UITableView *tableView = self.tableView; switch(type) { case NSFetchedResultsChangeInsert: [tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:newIndexPath] withRowAnimation:UITableViewRowAnimationFade]; break; case NSFetchedResultsChangeDelete: [tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade]; break; case NSFetchedResultsChangeUpdate: [self configureCell:[tableView cellForRowAtIndexPath:indexPath] atIndexPath:indexPath]; break; case NSFetchedResultsChangeMove: [tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade]; [tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:newIndexPath]withRowAnimation:UITableViewRowAnimationFade]; break; } } - (void)controllerDidChangeContent:(NSFetchedResultsController *)controller { NSLog(@"didChangeContent"); [self.tableView endUpdates]; [detailViewController.reminderView update]; } Starting the application, and then causing the last object to leave a section results in the following output: 2011-01-08 23:40:18.910 Reminders[54647:207] willChangeContent 2011-01-08 23:40:18.912 Reminders[54647:207] didChangeObject 2011-01-08 23:40:18.914 Reminders[54647:207] didChangeContent 2011-01-08 23:40:18.915 Reminders[54647:207] *** Assertion failure in -[UITableView _endCellAnimationsWithContext:], /SourceCache/UIKit_Sim/UIKit-1145.66/UITableView.m:825 2011-01-08 23:40:18.917 Reminders[54647:207] Serious application error. Exception was caught during Core Data change processing: Invalid update: invalid number of sections. The number of sections contained in the table view after the update (5) must be equal to the number of sections contained in the table view before the update (6), plus or minus the number of sections inserted or deleted (0 inserted, 0 deleted). with userInfo (null) As you can see, "willChangeContent", "didChangeObject" (moving the object in question), and "didChangeContent" were all called properly. Based on the Apple's NSFetchedResultsControllerDelegate documentation "didChangeSection" should have been called before "didChangeObject", which would have prevented the exception causing the crash. So I guess the question is how do I assure that didChangeSection gets called? Thanks in advance for any help!

  Read the article

• making an array controller the target of a button

  - by ian

  I am working through a chapter of COCOA PROGRAMMING FOR MAC OS X (3RD EDITION) on NSArrayController and it tells me to: Control-Drag to make the array controller become the target of the Add New Employee button. Set the action to add: However when I drag over the array controller it does not highlight so I get no target options. How do I do this correctly in the new XCode full size image document.h: // // Document.h // RaiseMan // // Created by user on 11/12/11. // Copyright (c) 2011 __MyCompanyName__. All rights reserved. // #import <Cocoa/Cocoa.h> @interface Document : NSDocument { NSMutableArray *employees; } @end document.m: // // Document.m // RaiseMan // // Created by user on 11/12/11. // Copyright (c) 2011 __MyCompanyName__. All rights reserved. // #import "Document.h" @implementation Document - (id)init { self = [super init]; if (self) { employees = [[NSMutableArray alloc] init]; } return self; } - (void)dealloc { [self setEmployees:nil]; [super dealloc]; } -(void)setEmployees:(NSMutableArray *)a { //this is an unusual setter method we are goign to ad a lot of smarts in the next chapter if (a == employees) return; [a retain]; [employees release]; employees = a; } - (NSString *)windowNibName { // Override returning the nib file name of the document // If you need to use a subclass of NSWindowController or if your document supports multiple NSWindowControllers, you should remove this method and override -makeWindowControllers instead. return @"Document"; } - (void)windowControllerDidLoadNib:(NSWindowController *)aController { [super windowControllerDidLoadNib:aController]; // Add any code here that needs to be executed once the windowController has loaded the document's window. } - (NSData *)dataOfType:(NSString *)typeName error:(NSError **)outError { /* Insert code here to write your document to data of the specified type. If outError != NULL, ensure that you create and set an appropriate error when returning nil. You can also choose to override -fileWrapperOfType:error:, -writeToURL:ofType:error:, or -writeToURL:ofType:forSaveOperation:originalContentsURL:error: instead. */ NSException *exception = [NSException exceptionWithName:@"UnimplementedMethod" reason:[NSString stringWithFormat:@"%@ is unimplemented", NSStringFromSelector(_cmd)] userInfo:nil]; @throw exception; return nil; } - (BOOL)readFromData:(NSData *)data ofType:(NSString *)typeName error:(NSError **)outError { /* Insert code here to read your document from the given data of the specified type. If outError != NULL, ensure that you create and set an appropriate error when returning NO. You can also choose to override -readFromFileWrapper:ofType:error: or -readFromURL:ofType:error: instead. If you override either of these, you should also override -isEntireFileLoaded to return NO if the contents are lazily loaded. */ NSException *exception = [NSException exceptionWithName:@"UnimplementedMethod" reason:[NSString stringWithFormat:@"%@ is unimplemented", NSStringFromSelector(_cmd)] userInfo:nil]; @throw exception; return YES; } + (BOOL)autosavesInPlace { return YES; } - (void)setEmployees:(NSMutableArray *)a; @end person.h: // // Person.h // RaiseMan // // Created by user on 11/12/11. // Copyright (c) 2011 __MyCompanyName__. All rights reserved. // #import <Foundation/Foundation.h> @interface Person : NSObject { NSString *personName; float expectedRaise; } @property (readwrite, copy) NSString *personName; @property (readwrite) float expectedRaise; @end person.m: // // Person.m // RaiseMan // // Created by user on 11/12/11. // Copyright (c) 2011 __MyCompanyName__. All rights reserved. // #import "Person.h" @implementation Person - (id) init { self = [super init]; expectedRaise = 5.0; personName = @"New Person"; return self; } - (void)dealloc { [personName release]; [super dealloc]; } @synthesize personName; @synthesize expectedRaise; @end

  Read the article

• Singleton method not getting called in Cocos2d

  - by jini

  I am calling a Singleton method that does not get called when I try doing this. I get no errors or anything, just that I am unable to see the CCLOG message. Under what reasons would a compiler not give you error and not allow you to call a method? [[GameManager sharedGameManager] openSiteWithLinkType:kLinkTypeDeveloperSite]; The method is defined as follows: -(void)openSiteWithLinkType:(LinkTypes)linkTypeToOpen { CCLOG(@"WE ARE IN openSiteWithLinkType"); //I NEVER SEE THIS MESSAGE NSURL *urlToOpen = nil; if (linkTypeToOpen == kLinkTypeDeveloperSite) { urlToOpen = [NSURL URLWithString:@"http://somesite.com"]; } if (![[UIApplication sharedApplication]openURL:urlToOpen]) { CCLOG(@"%@%@",@"Failed to open url:",[urlToOpen description]); [self runSceneWithID:kMainMenuScene]; } } HERE IS THE CODE TO MY SINGLETON: #import "GameManager.h" #import "MainMenuScene.h" @implementation GameManager static GameManager* _sharedGameManager = nil; @synthesize isMusicON; @synthesize isSoundEffectsON; @synthesize hasPlayerDied; +(GameManager*) sharedGameManager { @synchronized([GameManager class]) { if (!_sharedGameManager) { [[self alloc] init]; return _sharedGameManager; } return nil; } } +(id)alloc { @synchronized ([GameManager class]) { NSAssert(_sharedGameManager == nil,@"Attempted to allocate a second instance of the Game Manager singleton"); _sharedGameManager = [super alloc]; return _sharedGameManager; } return nil; } -(id)init { self = [super init]; if (self != nil) { //Game Manager initialized CCLOG(@"Game Manager Singleton, init"); isMusicON = YES; isSoundEffectsON = YES; hasPlayerDied = NO; currentScene = kNoSceneUninitialized; } return self; } -(void) runSceneWithID:(SceneTypes)sceneID { SceneTypes oldScene = currentScene; currentScene = sceneID; id sceneToRun = nil; switch (sceneID) { case kMainMenuScene: sceneToRun = [MainMenuScene node]; break; default: CCLOG(@"Unknown Scene ID, cannot switch scenes"); return; break; } if (sceneToRun == nil) { //Revert back, since no new scene was found currentScene = oldScene; return; } //Menu Scenes have a value of < 100 if (sceneID < 100) { if (UI_USER_INTERFACE_IDIOM() != UIUserInterfaceIdiomPad) { CGSize screenSize = [CCDirector sharedDirector].winSizeInPixels; if (screenSize.width == 960.0f) { //iPhone 4 retina [sceneToRun setScaleX:0.9375f]; [sceneToRun setScaleY:0.8333f]; CCLOG(@"GM: Scaling for iPhone 4 (retina)"); } else { [sceneToRun setScaleX:0.4688f]; [sceneToRun setScaleY:0.4166f]; CCLOG(@"GM: Scaling for iPhone 3G or older (non-retina)"); } } } if ([[CCDirector sharedDirector] runningScene] == nil) { [[CCDirector sharedDirector] runWithScene:sceneToRun]; } else { [[CCDirector sharedDirector] replaceScene:sceneToRun]; } } -(void)openSiteWithLinkType:(LinkTypes)linkTypeToOpen { CCLOG(@"WE ARE IN openSiteWithLinkType"); NSURL *urlToOpen = nil; if (linkTypeToOpen == kLinkTypeDeveloperSite) { urlToOpen = [NSURL URLWithString:@"http://somesite.com"]; } if (![[UIApplication sharedApplication]openURL:urlToOpen]) { CCLOG(@"%@%@",@"Failed to open url:",[urlToOpen description]); [self runSceneWithID:kMainMenuScene]; } } -(void) test { CCLOG(@"this is test"); } @end

  Read the article

• Find out when all processes in (void) is done?

  - by Emil

  Hey. I need to know how you can find out when all processes (loaded) from a - (void) are done, if it's possible. Why? I'm loading in data for a UITableView, and I need to know when a Loading... view can be replaced with the UITableView, and when I can start creating the cells. This is my code: - (void) reloadData { NSAutoreleasePool *releasePool = [[NSAutoreleasePool alloc] init]; NSLog(@"Reloading data."); NSURL *urlPosts = [NSURL URLWithString:[NSString stringWithFormat:@"%@", URL]]; NSError *lookupError = nil; NSString *data = [[NSString alloc] initWithContentsOfURL:urlPosts encoding:NSUTF8StringEncoding error:&lookupError]; postsData = [data componentsSeparatedByString:@"~"]; [data release], data = nil; urlPosts = nil; self.numberOfPosts = [[postsData objectAtIndex:0] intValue]; self.postsArrayID = [[postsData objectAtIndex:1] componentsSeparatedByString:@"#"]; self.postsArrayDate = [[postsData objectAtIndex:2] componentsSeparatedByString:@"#"]; self.postsArrayTitle = [[postsData objectAtIndex:3] componentsSeparatedByString:@"#"]; self.postsArrayComments = [[postsData objectAtIndex:4] componentsSeparatedByString:@"#"]; self.postsArrayImgSrc = [[postsData objectAtIndex:5] componentsSeparatedByString:@"#"]; NSMutableArray *writeToPlist = [NSMutableArray array]; NSMutableArray *writeToNoImagePlist = [NSMutableArray array]; NSMutableArray *imagesStored = [NSMutableArray arrayWithContentsOfFile:[rootPath stringByAppendingPathComponent:@"imagesStored.plist"]]; int loop = 0; for (NSString *postID in postsArrayID) { if ([imagesStored containsObject:[NSString stringWithFormat:@"%@.png", postID]]){ NSLog(@"Allready stored, jump to next. ID: %@", postID); continue; } NSLog(@"%@.png", postID); NSData *imageData = [NSData dataWithContentsOfURL:[NSURL URLWithString:[postsArrayImgSrc objectAtIndex:loop]]]; // If image contains anything, set cellImage to image. If image is empty, try one more time or use noImage.png, set in IB if (imageData == nil){ NSLog(@"imageData is empty before trying .jpeg"); // If image == nil, try to replace .jpg with .jpeg, and if that worked, set cellImage to that image. If that is also nil, use noImage.png, set in IB. imageData = [NSData dataWithContentsOfURL:[NSURL URLWithString:[[postsArrayImgSrc objectAtIndex:loop] stringByReplacingOccurrencesOfString:@".jpg" withString:@".jpeg"]]]; } if (imageData != nil){ NSLog(@"imageData is NOT empty when creating file"); [fileManager createFileAtPath:[rootPath stringByAppendingPathComponent:[NSString stringWithFormat:@"images/%@.png", postID]] contents:imageData attributes:nil]; [writeToPlist addObject:[NSString stringWithFormat:@"%@.png", postID]]; } else { [writeToNoImagePlist addObject:[NSString stringWithFormat:@"%@", postID]]; } imageData = nil; loop++; NSLog(@"imagePlist: %@\nnoImagePlist: %@", writeToPlist, writeToNoImagePlist); } NSMutableArray *writeToAllPlist = [NSMutableArray arrayWithArray:writeToPlist]; [writeToPlist addObjectsFromArray:[NSArray arrayWithContentsOfFile:nowPlist]]; [writeToAllPlist addObjectsFromArray:[NSArray arrayWithContentsOfFile:[rootPath stringByAppendingPathComponent:@"imagesStored.plist"]]]; [writeToNoImagePlist addObjectsFromArray:[NSArray arrayWithContentsOfFile:[rootPath stringByAppendingPathComponent:@"noImage.plist"]]]; [writeToPlist writeToFile:nowPlist atomically:YES]; [writeToAllPlist writeToFile:[rootPath stringByAppendingPathComponent:@"imagesStored.plist"] atomically:YES]; [writeToNoImagePlist writeToFile:[rootPath stringByAppendingPathComponent:@"noImage.plist"] atomically:YES]; [releasePool release]; }

  Read the article

• 2 way SSL between SOA and OSB

  - by Johnny Shum

  If you have a need to use 2 way SSL between SOA composite and external partner links, you can follow these steps. Create the identity keystores, trust keystores, and server certificates. Setup keystores and SSL on WebLogic Setup server to use 2 way SSL Configure your SOA composite's partner link to use 2 way SSL Configure SOA engine two ways SSL In this case,  I use SOA and OSB for the test.  I started with a separate OSB and SOA domains.  I deployed two soap based proxies on OSB and two composites on SOA.  In SOA, one composite invokes a OSB proxy service, the other is invoked by the OSB.  Similarly,  in OSB,  one proxy invokes a SOA composite and the other is invoked by SOA. 1. Create the identity keystores, trust keystores and the server certificates Since this is a development environment, I use JDK's keytool to create the stores and use self signing certificate.  For production environment, you should use certificates from a trusted certificate authority like Verisign.    I created a script below to show what is needed in this step.  The only requirement is when creating the SOA identity certificate, you MUST use the alias mykey. STOREPASS=welcome1KEYPASS=welcome1# generate identity keystore for soa and osb.  Note: For SOA, you MUST use alias mykeyecho "creating stores"keytool -genkey -alias mykey -keyalg "RSA" -sigalg "SHA1withRSA" -dname "CN=soa, C=US" -keystore soa-default-keystore.jks -storepass $STOREPASS -keypass $KEYPASS keytool -genkey -alias osbkey -keyalg "RSA" -sigalg "SHA1withRSA" -dname "CN=osb, C=US" -keystore osb-default-keystore.jks -storepass $STOREPASS -keypass $KEYPASS# listing keystore contentsecho "listing stores contents"keytool -list -alias mykey -keystore soa-default-keystore.jks -storepass $STOREPASSkeytool -list -alias osbkey -keystore osb-default-keystore.jks -storepass $STOREPASS# exporting certs from storesecho "export certs from  stores"keytool -exportcert -alias mykey -keystore soa-default-keystore.jks -storepass $STOREPASS -file soacert.derkeytool -exportcert -alias osbkey -keystore osb-default-keystore.jks -storepass $STOREPASS -file osbcert.der # import certs to trust storesecho "import certs"keytool -importcert -alias osbkey -keystore soa-trust-keystore.jks -storepass $STOREPASS -file osbcert.der -keypass $KEYPASSkeytool -importcert -alias mykey -keystore osb-trust-keystore.jks -storepass $STOREPASS -file soacert.der  -keypass $KEYPASS SOA suite uses the JDK's SSL implementation for outbound traffic instead of the WebLogic's implementation.  You will need to import the partner's public cert into the trusted keystore used by SOA.  The default trusted keystore for SOA is DemoTrust.jks and it is located in $MW_HOME/wlserver_10.3/server/lib.   (This is set in the startup script -Djavax.net.ssl.trustStore).   If you use your own trusted keystore, then you will need to import it into your own trusted keystore. keytool -importcert -alias osbkey -keystore $MW_HOME/wlserver_10.3/server/lib/DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase  -file osbcert.der -keypass $KEYPASS If you do not perform this step, you will encounter this exception in runtime when SOA invokes OSB service using 2 way SSL Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target  2.  Setup keystores and SSL on WebLogic First, you will need to login to the WebLogic console, navigate to the server's configuration->Keystore's tab.   Change the Keystores type to Custom Identity and Custom Trust and enter the rest of the fields. Then you navigate to the SSL tab, enter the fields in the identity section and expand the Advanced section.  Since I am using self signing cert on my VM enviornment, I disabled Hostname verification.  In real production system, this should not be the case.   I also enabled the option "Use Server Certs", so that the application uses the server cert to initiate https traffic (it is important to enable this in OSB). Last, you enable SSL listening port in the Server's configuration->General tab. 3.  Setup server to use 2 way SSL If you follow the screen shot in previous step, you can see in the Server->Configuration->SSL->Advanced section, there is an option for Two Way Client Cert Behavior,  you should set this to Client Certs Requested and Enforced. Repeat step 2 and 3 done on OSB.  After all these configurations,  you have to restart all the servers. 4.  Configure your SOA composite's partner link to use 2 way SSL You do this by modifying the composite.xml in your project, locate the partner's link reference and add the property oracle.soa.two.way.ssl.enabled.   <reference name="callosb" ui:wsdlLocation="helloword.wsdl">    <interface.wsdl interface="http://www.examples.com/wsdl/HelloService.wsdl#wsdl.interface(Hello_PortType)"/>    <binding.ws port="http://www.examples.com/wsdl/HelloService.wsdl#wsdl.endpoint(Hello_Service/Hello_Port)"                location="helloword.wsdl" soapVersion="1.1">      <property name="weblogic.wsee.wsat.transaction.flowOption"                type="xs:string" many="false">WSDLDriven</property>   <property name="oracle.soa.two.way.ssl.enabled">true</property>    </binding.ws>  </reference> In OSB, you should have checked the HTTPS required flag in the proxy's transport configuration.  After this,  rebuilt the composite jar file and ready to deploy in the EM console later. 5.  Configure SOA engine two ways SSL Oracle SOA Suite uses both Oracle WebLogic Server and Sun Secure Socket Layer (SSL) stacks for two-way SSL configurations. For the inbound web service bindings, Oracle SOA Suite uses the Oracle WebLogic Server infrastructure and, therefore, the Oracle WebLogic Server libraries for SSL.  This is already done by step 2 and 3 in the previous section. For the outbound web service bindings, Oracle SOA Suite uses JRF HttpClient and, therefore, the Sun JDK libraries for SSL.  You do this by configuring the SOA Engine in the Enterprise Manager Console, select soa-infra->SOA Administration->Common Properties Then click at the link at the bottom of the page:  "More SOA Infra Advances Infrastructure Configuration Properties" and then enter the full path of soa identity keystore in the value field of the KeyStoreLocation attribute.  Click Apply and Return then navigate to the domain->security->credential. Here, you provide the password to the keystore.  Note: the alias of the certficate must be mykey as described in step 1, so you only need to provide the password to the identity keystore.   You accomplish this by: Click Create Map In the Map Name field, enter SOA, and click OK Click Create Key Enter the following details where the password is the password for the SOA identity keystore. 6.  Test and Trouble Shooting Once the setup is complete and server restarted, you can deploy the composite in the EM console and test it.  In case of error,  you can read the server log file to determine the cause of the error.  For example, If you have not setup step 5 and test 2 way SSL, you will see this in the log when invoking OSB from BPEL: java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: oracle.fabric.common.FabricInvocationException: Unable to access the following endpoint(s): https://localhost.localdomain:7002/default/helloword ####<Sep 22, 2012 2:07:37 PM CDT> <Error> <oracle.soa.bpel.engine.ws> <rhel55> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0AFDAEF20610F8FD89C5> ............ <11d1def534ea1be0:-4034173:139ef56d9f0:-8000-00000000000002ec> <1348340857956> <BEA-000000> <got FabricInvocationException sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target If you have not enable WebLogic SSL to use server certificate in the console and invoke SOA composite from OSB using two ways SSL, you will see this error: ####<Sep 22, 2012 2:07:37 PM CDT> <Warning> <Security> <rhel55> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <11d1def534ea1be0:-51f5c76a:139ef5e1e1a:-8000-00000000000000e2> <1348340857776> <BEA-090485> <CERTIFICATE_UNKNOWN alert was received from localhost.localdomain - 127.0.0.1. The peer has an unspecified issue with the certificate. SSL debug tracing should be enabled on the peer to determine what the issue is.> ####<Sep 22, 2012 2:07:37 PM CDT> <Warning> <Security> <rhel55> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <11d1def534ea1be0:-51f5c76a:139ef5e1e1a:-8000-00000000000000e4> <1348340857786> <BEA-090485> <CERTIFICATE_UNKNOWN alert was received from localhost.localdomain - 127.0.0.1. The peer has an unspecified issue with the certificate. SSL debug tracing should be enabled on the peer to determine what the issue is.> ####<Sep 22, 2012 2:27:21 PM CDT> <Warning> <Security> <rhel55> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <11d1def534ea1be0:-51f5c76a:139ef5e1e1a:-8000-0000000000000124> <1348342041926> <BEA-090497> <HANDSHAKE_FAILURE alert received from localhost - 127.0.0.1. Check both sides of the SSL configuration for mismatches in supported ciphers, supported protocol versions, trusted CAs, and hostname verification settings.> References http://docs.oracle.com/cd/E23943_01/admin.1111/e10226/soacompapp_secure.htm#CHDCFABB   Section 5.6.4 http://docs.oracle.com/cd/E23943_01/web.1111/e13707/ssl.htm#i1200848

  Read the article

• Metro: Namespaces and Modules

  - by Stephen.Walther

  The goal of this blog entry is to describe how you can use the Windows JavaScript (WinJS) library to create namespaces. In particular, you learn how to use the WinJS.Namespace.define() and WinJS.Namespace.defineWithParent() methods. You also learn how to hide private methods by using the module pattern. Why Do We Need Namespaces? Before we do anything else, we should start by answering the question: Why do we need namespaces? What function do they serve? Do they just add needless complexity to our Metro applications? After all, plenty of JavaScript libraries do just fine without introducing support for namespaces. For example, jQuery has no support for namespaces and jQuery is the most popular JavaScript library in the universe. If jQuery can do without namespaces, why do we need to worry about namespaces at all? Namespaces perform two functions in a programming language. First, namespaces prevent naming collisions. In other words, namespaces enable you to create more than one object with the same name without conflict. For example, imagine that two companies – company A and company B – both want to make a JavaScript shopping cart control and both companies want to name the control ShoppingCart. By creating a CompanyA namespace and CompanyB namespace, both companies can create a ShoppingCart control: a CompanyA.ShoppingCart and a CompanyB.ShoppingCart control. The second function of a namespace is organization. Namespaces are used to group related functionality even when the functionality is defined in different physical files. For example, I know that all of the methods in the WinJS library related to working with classes can be found in the WinJS.Class namespace. Namespaces make it easier to understand the functionality available in a library. If you are building a simple JavaScript application then you won’t have much reason to care about namespaces. If you need to use multiple libraries written by different people then namespaces become very important. Using WinJS.Namespace.define() In the WinJS library, the most basic method of creating a namespace is to use the WinJS.Namespace.define() method. This method enables you to declare a namespace (of arbitrary depth). The WinJS.Namespace.define() method has the following parameters: · name – A string representing the name of the new namespace. You can add nested namespace by using dot notation · members – An optional collection of objects to add to the new namespace For example, the following code sample declares two new namespaces named CompanyA and CompanyB.Controls. Both namespaces contain a ShoppingCart object which has a checkout() method: // Create CompanyA namespace with ShoppingCart WinJS.Namespace.define("CompanyA"); CompanyA.ShoppingCart = { checkout: function (){ return "Checking out from A"; } }; // Create CompanyB.Controls namespace with ShoppingCart WinJS.Namespace.define( "CompanyB.Controls", { ShoppingCart: { checkout: function(){ return "Checking out from B"; } } } ); // Call CompanyA ShoppingCart checkout method console.log(CompanyA.ShoppingCart.checkout()); // Writes "Checking out from A" // Call CompanyB.Controls checkout method console.log(CompanyB.Controls.ShoppingCart.checkout()); // Writes "Checking out from B" In the code above, the CompanyA namespace is created by calling WinJS.Namespace.define(“CompanyA”). Next, the ShoppingCart is added to this namespace. The namespace is defined and an object is added to the namespace in separate lines of code. A different approach is taken in the case of the CompanyB.Controls namespace. The namespace is created and the ShoppingCart object is added to the namespace with the following single line of code: WinJS.Namespace.define( "CompanyB.Controls", { ShoppingCart: { checkout: function(){ return "Checking out from B"; } } } ); Notice that CompanyB.Controls is a nested namespace. The top level namespace CompanyB contains the namespace Controls. You can declare a nested namespace using dot notation and the WinJS library handles the details of creating one namespace within the other. After the namespaces have been defined, you can use either of the two shopping cart controls. You call CompanyA.ShoppingCart.checkout() or you can call CompanyB.Controls.ShoppingCart.checkout(). Using WinJS.Namespace.defineWithParent() The WinJS.Namespace.defineWithParent() method is similar to the WinJS.Namespace.define() method. Both methods enable you to define a new namespace. The difference is that the defineWithParent() method enables you to add a new namespace to an existing namespace. The WinJS.Namespace.defineWithParent() method has the following parameters: · parentNamespace – An object which represents a parent namespace · name – A string representing the new namespace to add to the parent namespace · members – An optional collection of objects to add to the new namespace The following code sample demonstrates how you can create a root namespace named CompanyA and add a Controls child namespace to the CompanyA parent namespace: WinJS.Namespace.define("CompanyA"); WinJS.Namespace.defineWithParent(CompanyA, "Controls", { ShoppingCart: { checkout: function () { return "Checking out"; } } } ); console.log(CompanyA.Controls.ShoppingCart.checkout()); // Writes "Checking out" One significant advantage of using the defineWithParent() method over the define() method is the defineWithParent() method is strongly-typed. In other words, you use an object to represent the base namespace instead of a string. If you misspell the name of the object (CompnyA) then you get a runtime error. Using the Module Pattern When you are building a JavaScript library, you want to be able to create both public and private methods. Some methods, the public methods, are intended to be used by consumers of your JavaScript library. The public methods act as your library’s public API. Other methods, the private methods, are not intended for public consumption. Instead, these methods are internal methods required to get the library to function. You don’t want people calling these internal methods because you might need to change them in the future. JavaScript does not support access modifiers. You can’t mark an object or method as public or private. Anyone gets to call any method and anyone gets to interact with any object. The only mechanism for encapsulating (hiding) methods and objects in JavaScript is to take advantage of functions. In JavaScript, a function determines variable scope. A JavaScript variable either has global scope – it is available everywhere – or it has function scope – it is available only within a function. If you want to hide an object or method then you need to place it within a function. For example, the following code contains a function named doSomething() which contains a nested function named doSomethingElse(): function doSomething() { console.log("doSomething"); function doSomethingElse() { console.log("doSomethingElse"); } } doSomething(); // Writes "doSomething" doSomethingElse(); // Throws ReferenceError You can call doSomethingElse() only within the doSomething() function. The doSomethingElse() function is encapsulated in the doSomething() function. The WinJS library takes advantage of function encapsulation to hide all of its internal methods. All of the WinJS methods are defined within self-executing anonymous functions. Everything is hidden by default. Public methods are exposed by explicitly adding the public methods to namespaces defined in the global scope. Imagine, for example, that I want a small library of utility methods. I want to create a method for calculating sales tax and a method for calculating the expected ship date of a product. The following library encapsulates the implementation of my library in a self-executing anonymous function: (function (global) { // Public method which calculates tax function calculateTax(price) { return calculateFederalTax(price) + calculateStateTax(price); } // Private method for calculating state tax function calculateStateTax(price) { return price * 0.08; } // Private method for calculating federal tax function calculateFederalTax(price) { return price * 0.02; } // Public method which returns the expected ship date function calculateShipDate(currentDate) { currentDate.setDate(currentDate.getDate() + 4); return currentDate; } // Export public methods WinJS.Namespace.define("CompanyA.Utilities", { calculateTax: calculateTax, calculateShipDate: calculateShipDate } ); })(this); // Show expected ship date var shipDate = CompanyA.Utilities.calculateShipDate(new Date()); console.log(shipDate); // Show price + tax var price = 12.33; var tax = CompanyA.Utilities.calculateTax(price); console.log(price + tax); In the code above, the self-executing anonymous function contains four functions: calculateTax(), calculateStateTax(), calculateFederalTax(), and calculateShipDate(). The following statement is used to expose only the calcuateTax() and the calculateShipDate() functions: // Export public methods WinJS.Namespace.define("CompanyA.Utilities", { calculateTax: calculateTax, calculateShipDate: calculateShipDate } ); Because the calculateTax() and calcuateShipDate() functions are added to the CompanyA.Utilities namespace, you can call these two methods outside of the self-executing function. These are the public methods of your library which form the public API. The calculateStateTax() and calculateFederalTax() methods, on the other hand, are forever hidden within the black hole of the self-executing function. These methods are encapsulated and can never be called outside of scope of the self-executing function. These are the internal methods of your library. Summary The goal of this blog entry was to describe why and how you use namespaces with the WinJS library. You learned how to define namespaces using both the WinJS.Namespace.define() and WinJS.Namespace.defineWithParent() methods. We also discussed how to hide private members and expose public members using the module pattern.

  Read the article

• How do I get vmbuilder to progress?

  - by Avery Chan

  I've used the following command to create my vm: vmbuilder kvm ubuntu --verbose --suite=precise --flavour=virtual --arch=amd64 -o --libvirt=qemu:///system --tmpfs=- --ip=192.168.2.1 --part=/home/shared/vm1/vmbuilder.partition --templates=/home/shared/vm1/templates --user=vadmin --name=VM-Administrator --pass=vpass --addpkg=vim-nox --addpkg=unattended-upgrades --addpkg=acpid --firstboot=/home/shared/vm1/boot.sh --mem=256 --hostname=chameleon --bridge=br0 I've been trying to follow the direction here. My system just outputs this and it hangs at the last line: 2012-06-26 18:08:29,225 INFO : Mounting tmpfs under /tmp/tmpJbf1dZtmpfs 2012-06-26 18:08:29,234 INFO : Calling hook: preflight_check 2012-06-26 18:08:29,243 INFO : Calling hook: set_defaults 2012-06-26 18:08:29,244 INFO : Calling hook: bootstrap How can I get vmbuilder to continue the process instead of dying right here? I'm running 12.04. EDIT: Adding some additional output details When I ^C to get out of the hang I see this: ^C2012-06-26 18:19:29,622 INFO : Unmounting tmpfs from /tmp/tmpJbf1dZtmpfs Traceback (most recent call last): File "/usr/bin/vmbuilder", line 24, in <module> cli.main() File "/usr/lib/python2.7/dist-packages/VMBuilder/contrib/cli.py", line 216, in main distro.build_chroot() File "/usr/lib/python2.7/dist-packages/VMBuilder/distro.py", line 83, in build_chroot self.call_hooks('bootstrap') File "/usr/lib/python2.7/dist-packages/VMBuilder/distro.py", line 67, in call_hooks call_hooks(self, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/VMBuilder/util.py", line 165, in call_hooks getattr(context, func, log_no_such_method)(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/VMBuilder/plugins/ubuntu/distro.py", line 136, in bootstrap self.suite.debootstrap() File "/usr/lib/python2.7/dist-packages/VMBuilder/plugins/ubuntu/dapper.py", line 269, in debootstrap run_cmd(*cmd, **kwargs) File "/usr/lib/python2.7/dist-packages/VMBuilder/util.py", line 113, in run_cmd fds = select.select([x.file for x in [mystdout, mystderr] if not x.closed], [], [])[0]

  Read the article

• Java Champion Jim Weaver on JavaFX

  - by Janice J. Heiss

  Hardly anyone knows more about JavaFX than Java Champion and Oracle’s JavaFX Evangelist, Jim Weaver, who will be leading two Hands on Labs on aspects of JavaFX at this year’s JavaOne: HOL11265 – “Playing to the Strengths of JavaFX and HTML5” (With Jeff Klamer - App Designer, Jeff Klamer Design) Wednesday, Oct 3, 3:00 PM - 5:00 PM - Hilton San Francisco - Franciscan A/B/C/D HOL3058 – “Custom JavaFX Controls” (With Gerrit Grunwald, Senior Software Engineer, Canoo Engineering AG; Bob Larsen, Consultant, Larsen Consulting; and Peter Vašenda, Software Engineer, Oracle) Tuesday, Oct 2, 12:30 PM - 2:30 PM - Hilton San Francisco - Franciscan A/B/C/D I caught up with Jim at JavaOne to ask him for a current snapshot of JavaFX. “In my opinion,” observed Weaver, “the most important thing happening with JavaFX is the ongoing improvement to rich-client Java application deployment. For example, JavaFX packaging tools now provide built-in support for self-contained application packages. A package may optionally contain the Java Runtime, and be distributed with a native installer (e.g., a DMG or EXE). This makes it easy for users to install JavaFX apps on their client machines, perhaps obtaining the apps from the Mac App Store, for example. Igor Nekrestyanov and Nancy Hildebrandt have written a comprehensive guide to JavaFX application deployment, the following section of which covers Self-Contained Application Packaging: http://docs.oracle.com/javafx/2/deployment/self-contained-packaging.htm#BCGIBBCI.“Igor also wrote a blog post titled, "7u10: JavaFX Packaging Tools Update," that covers improvements introduced so far in Java SE 7 update 10. Here's the URL to the blog post:https://blogs.oracle.com/talkingjavadeployment/entry/packaging_improvements_in_jdk_7”I asked about how the strengths of JavaFX and HTML5 interact and reinforce each other. “They interact and reinforce each other very well. I was about to be amazed at your insight in asking that question, but then recalled that one of my JavaOne sessions is a Hands-on Lab titled ‘Playing to the Strengths of JavaFX and HTML5.’ In that session, we'll cover the JavaFX and HTML5 WebView control, the strengths of each technology, and the various ways that Java and contents of the WebView can interact.”And what is he looking forward to at JavaOne? “I'm personally looking forward to some excellent sessions, and connecting with colleagues and friends that I haven't seen in a while!” Jim Weaver is another good reason to feel good about JavaOne.

  Read the article

• How will technological singularity affect programmers?

  - by Amir Rezaei

  I'm one of the believers that think that we will hit the technological singularity sooner or later. Then the question is if any profession will be unaffected by changes that will come. In the end it will be we programmers that will implement the first self-aware AI. How will technological singularity affect us programmer? What is your professional opinion regarding technological singularity? EDIT: By self-aware I refer to an entity that questions and seek answers, able to analyze and solve problem. Artificial neural network is branch in mathematics/statistics with many widely used algorithms. The algorithms are applied where recognition of data is needed. For example hidden Markov model is used for voice recognition. Another well-known area is business intelligence and data mining. Today algorithms are self-learning. That is a bit of AI what many never think of. Let an ultraintelligent machine be defined as a machine that can far surpass all the intellectual activities of any man however clever. Since the design of machines is one of these intellectual activities, an ultraintelligent machine could design even better machines; there would then unquestionably be an ‘intelligence explosion,’ and the intelligence of man would be left far behind. Thus the first ultraintelligent machine is the last invention that man need ever make. Link to Ref.

  Read the article

• Admob banner not getting remove from superview

  - by Anil gupta

  I am developing one 2d game using cocos2d framework, in this game i am using admob for advertising, in some classes not in all classes but admob banner is visible in every class and after some time game getting crash also. I am not getting how admob banner is comes in every class in fact i have not declare in Rootviewcontroller class. can any one suggest me how to integrate Admob in cocos2d game, i want Admob banner in particular classes not in every class, I am using latest google admob sdk, my code is below: Thanks in advance ` -(void)AdMob{ NSLog(@"ADMOB"); CGSize winSize = [[CCDirector sharedDirector]winSize]; // Create a view of the standard size at the bottom of the screen. if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad){ bannerView_ = [[GADBannerView alloc] initWithFrame:CGRectMake(size.width/2-364, size.height - GAD_SIZE_728x90.height, GAD_SIZE_728x90.width, GAD_SIZE_728x90.height)]; } else { // It's an iPhone bannerView_ = [[GADBannerView alloc] initWithFrame:CGRectMake(size.width/2-160, size.height - GAD_SIZE_320x50.height, GAD_SIZE_320x50.width, GAD_SIZE_320x50.height)]; } if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad) { bannerView_.adUnitID =@"a15062384653c9e"; } else { bannerView_.adUnitID =@"a15062392a0aa0a"; } bannerView_.rootViewController = self; [[[CCDirector sharedDirector]openGLView]addSubview:bannerView_]; [bannerView_ loadRequest:[GADRequest request]]; GADRequest *request = [[GADRequest alloc] init]; request.testing = [NSArray arrayWithObjects: GAD_SIMULATOR_ID, nil]; // Simulator [bannerView_ loadRequest:request]; } //best practice for removing the barnnerView_ -(void)removeSubviews{ NSArray* subviews = [[CCDirector sharedDirector]openGLView].subviews; for (id SUB in subviews){ [(UIView*)SUB removeFromSuperview]; [SUB release]; } NSLog(@"remove from view"); } //this makes the refreshTimer count -(void)targetMethod:(NSTimer *)theTimer{ //INCREASE OF THE TIMER AND SECONDS elapsedTime++; seconds++; //INCREASE OF THE MINUTOS EACH 60 SECONDS if (seconds>=60) { seconds=0; minutes++; [self removeSubviews]; [self AdMob]; } NSLog(@"TIME: %02d:%02d", minutes, seconds); } `

  Read the article

• Defense Manpower Data Center Wins Award for Excellence in the Workforce

  - by Peggy Chen

  The Defense Manpower Data Center milConnect website recently won the 2012 Excellence.gov Award for Excellence in the Workforce. Defense Manpower Data Center milConnect is a centralized, online resource that provides military service members (active and retired) and their families (over 42 million in total) quick access to their profile, health care enrollments, benefits, and other military-related topics. An easy to use, safe and secure website, milConnect also provides service members with convenient access their personnel and service-related information. The self-service website allow users to quickly and easily find and, where applicable, update their information in the Defense Eligibility Reporting System (DEERS) and milConnect transmits information to and from one reliable source safely and securely.  The Defense Manpower Data Center (DMDC) maintains the largest, most comprehensive central repository of personnel, manpower, casualty, pay, entitlement, personnel security, person identity and attributes, survey, testing, training, and financial data in the Department of Defense (DoD).  This is one of the largest systems of record in the world. milConnect had the challenge of modernizing the user experience for over 42 million users. With records in over 22 applications and 25 interfaces in hundreds of existing systems, milConnect needed to reduce the complexity of multiple authentication sources as well as consolidating access to existing systems with sensitive information. It accomplished this using a service-orientated architecture, enterprise security and access and identity management for self-service access on a massive scale. By providing 24x7x365 secure access and handling over 5 million transactions daily, not only has milConnect, built on Oracle WebCenter, streamlined and improved the customer experience for military personnel and families. it has also done so while cutting costs, allowing self-service access, and promoting electronic government. Congrats to Defense Manpower Data Center and milConnect! 

  Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >