Search Results

Search found 7751 results on 311 pages for 'you guys lie'.

Page 121/311 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

• About HDD enclosure

  - by kmitnick

  hey guys, how r u doin? I have this 3.5" IDE enclosure, and it works great, I mean I love the idea of enclosures ( not the power feeding thing :), btw can't I just insert a chargable battery to feed the power when I am unable to find an electricity block), anyway my question is, when I finish the usage of the enclosure I safely remove it when using Windows or umount when working with Linux, and after that I got confused whether to turn it off or no? when I turn it off, the HDD suddenly stop spinning as if power failure not as when it was an internal and normally shuted down the pc. So is it ok to turn it off the way I've just said??? regards, ~Abed

  Read the article

• Multiple VLANs, multiple subnets, single DHCP server?

  - by EightQuarterBit

  Hey guys! At my job we are prepping to transition from multiple LANs connected over slow VPN connections to a single MAN connected over fiber, and I've got a few questions. First of all, we are planning on making each physical site its own VLAN, but we would like to have a single DHCP server at the data center hand out IPs to each VLAN. We've pretty much got the VLAN tagging structure all worked out, but we would like to have our single DHCP server assign different subnets of IPs to each VLAN. For instance, VLAN 2 gets 10.0.2.x through 10.0.4.x, VLAN 3 gets 10.0.5.x through 10.0.7.x etc. We are an Active Directory based shop and we have a Server 2003 box handling DHCP (though we aren't averse to upgrading it to server 2008.) Is this feasible, or am I pipe-dreaming?

  Read the article

• How to make MAMP PRO / XAMPP secure enough to serve as production webserver? Is it possible?

  - by Andrei

  Hi, my task is to setup a MAMP webserver for our website in the easiest way so it can be managed by my colleagues without experience in server administration. MAMP PRO is an excellent solution, but some guys don't suggest to use it for serving external requests. Could you explain why it is bad (in details if possible) and how to make it secure enough to be a full-scale and not-only-local webserver? Is there a better solution? Update There is a discussion on the MAMP website. XAMPP developers say that one can make their product secure: The default configuration is not good from a securtiy point of view and it's not secure enough for a production environment - please don't use XAMPP in such environment. Since LAMPP 0.9.5 you can make your XAMPP installation secure by calling »/opt/lampp/lampp security«. Could you comment it?

  Read the article

• scalability with nginx, passenger, ruby on rails setup

  - by Dani Cela

  Hey guys I had a question regarding scalability for my RoR application. We have been optimizing our application over the last few days and after running blitz.io, notice that our application times out after maybe 1000 hits in 30 seconds we experienced massive timeouts. In the 1 minute test apparently 74% of users would have timed out. Look at the performance of my website: http://blitz.io/report/1c8eb2f395a5eadeabd62fd831ada9e5 Not saying that our website will in any way experience this now, but I wish to design the infrastructure to handle this. What is normally done in this situation? Currently we have one web server and one database server. Would load balancing be the route to go?

  Read the article

• System randomly Crashing

  - by Hailwood

  Hi guys, Computer is running windows XP. seems to be crashing randomly, no pattern in its timing or activity to cause it. What could be causing this/how do I diagnose this? Event log shows Event Type: Error Event Source: System Error Event Category: (102) Event ID: 1003 Date: 22/02/2011 Time: 7:10:05 p.m. User: N/A Computer: YOUR-8ABC512DA0 Description: Error code 1000008e, parameter1 c0000005, parameter2 bf801b50, parameter3 ee118c44, parameter4 00000000. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 53 79 73 74 65 6d 20 45 System E 0008: 72 72 6f 72 20 20 45 72 rror Er 0010: 72 6f 72 20 63 6f 64 65 ror code 0018: 20 31 30 30 30 30 30 38 1000008 0020: 65 20 20 50 61 72 61 6d e Param 0028: 65 74 65 72 73 20 63 30 eters c0 0030: 30 30 30 30 30 35 2c 20 000005, 0038: 62 66 38 30 31 62 35 30 bf801b50 0040: 2c 20 65 65 31 31 38 63 , ee118c 0048: 34 34 2c 20 30 30 30 30 44, 0000 0050: 30 30 30 30 0000

  Read the article

• New set up DHCP Server on Server 2008 R2 won't work, Event-ID 1046

  - by Ian

  I just set up a 2008 R2 as DC, and DNS. Both worked fine, DNS works fine forward and reverse lookup. Now I wanted to install DHCP. As soon as the installation of the role is finished, I get this Event-ID Error 1046: Link When I first set it up there was also a Event-ID 1059 Error: Link The dhcp server is authorized. I don't know what else I should do. Getting crazy here, hope you guys can help me.

  Read the article

• Static route in conflict with a default route

  - by Ossan Sokiv

  Hi guys, I have a default route configured. 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.1 I'd like to add a static route to pass traffic destined for 192.168.1.51 via a load balancer's redundant virtual interface at 192.168.1.2. ip route add 192.168.1.51 mask 255.255.255.255 via 192.168.1.2 When I try to add the static route I get this error. Error: either "to" is duplicate or "default" is garbage." It doesn't want to add the static route because it's in conflict with the default route. Is there a way around this? Regards Ossan

  Read the article

• Wrong DNS query in Active directory network with NetBIOS enabled client

  - by koankoder

  The setup: Active Directory is enabled on the network (abcd.com) We have a single character host name (1.abcd.com) one of the desktop has an old XP with NetBIOS stuff enabled The Problem Whenever we query for any host name from the XP machine, the first character alone is taken for DNS query (one.abcd.com will query for o.abcd.com, two.abcd.com will query for t.abcd.com) Even if we give some IP, the application queries with numeric prefix (10.x.x.x will query for 1.abcd.com).Since we already have 1.abcd.com, all query and traffic ends up in 1.abcd.com After discussion with network guys, it seems netbios DNS queries by having some prefix etc. but none of them is actually sure on what is happening. Is there any docs which can explain this behavior ? Is this valid behavior in NetBIOS environment ?

  Read the article

• LVM2 vs MDADM performance

  - by archer

  I've used MDADM + LVM2 on many boxes for quite a while. MDADM was serving for both RAID0 and RAID1 arrays, while LVM2 where used for logical volumes on top of MDADM. Recently I've found that LVM2 could be used w/o MDADM (thus minus one layer, as the result - less overhead) for both mirroring and stripping. However, some guys claims that READ PERFORMANCE on LVM2 for mirrored array is not that fast as for LVM2 (linear) on top of MDADM (RAID1) as LVM2 does not read from 2+ devices at a time, but use 2nd and higher devices in case of 1st device failure. MDADM reads from 2 devices at a time (even in mirrored mode). Who could confirm that?

  Read the article

• How to read a Text File Hidden Characters?

  - by balexandre

  Hi guys, I've created a text file from an application that I developed. When I send the text file to a SYSTEM Validation, they (3rd Party System) say that the file is invalid and that the file contains 3 characters in the beginning of the file that are not allowed as well special characters are not correct. They also say I need to use either ISO 8859-1 or PC850 Well, I'm using NotePad++ and I can't see that at all! What is the best text file reader for this kinda problems? EDITED I also have a MAC and just a thought I remembered opening in TextMate ... WOW! Now I know what they are talking about! How can I have the same in Windows?

  Read the article

• Disable remote session timeout on Win Server 2012 R2

  - by Sarchophagi

  For botting purposes, I have to keep my Win Server 2012 R2 running without logging-off after I disconnect from Remote Session. Found information about it here: http://technet.microsoft.com/en-us/library/cc754272.aspx but I just its for Win Server 2008 and doesn't seem to work on 2012 version. Could you guys help me setting infinite timout? EDIT: Tried this answer Changing the login timeout for Windows Remote Desktop Services but without results.. MORE DETAIL ABOUT WHAT I NEED: I connect to Amazon ECL Istance with "Remote Desktop Conection". I need to put remote server to keep running as if an user was normally remotely logged in, and prevent it from going to that log-out stand-by screen, usually blue coloured @ winserver2012, because i'm using macros that take screenshots of screen and find bitmap positions, do clicks, move mouse and stuff..

  Read the article

• Xenserver boot error

  - by Adrian

  I'm trying to get Xenserver 5.5 running on a spare computer here, hardware specs: Intel Q6600, 4GB Ram, and Gigabyte GA-P35-DS3R motherboard Xenserver itself installs fine onto a 150GB sata hdd, however it fails to boot whatsoever, giving this garbled mess: http://img697.imageshack.us/img697/9918/biosi.jpg it's not frozen because if I press enter it just prints a different garble and it also says "could not find kernel image". The strangest thing is if I put that hdd in my desktop and assign it to a VMWare desktop vm (under the ESX profile no less) it boots perfectly... leading me to believe there are no problems with the install or the hdd itself. From what I can tell the error seems to be occuring completely seperately to Xenserver, in the bootloader extlinux?. If there was a motherboard compatibility issue I would think it would also have manifested during installation, and the fact the problem seems to be with the booting into Xen makes me doubt this. Any ideas guys? (I'm using Xen because it can do PCI passthrough without VT-d.)

  Read the article

• VM can’t connect to outside in bridged mode

  - by Kamal

  Hi Guys, I am not able to ping any machine(not even the host) from Guest VM in bridged mode. But I got an IP which is on the same subnet as host. I can ping my guest VM from the host and can use ssh to connect to the guest. I am using Vmware workstation 6.5. Guest VM is a centos VM and host is windows xp. Every thing works fine in NAT mode. Any clues as to what could be happening. I tried disabling all the firewalls I have. My virtual network editor shows that my ethernet adapter(the one my host uses) is used for bridging. It is connected. I don't understand how I can get an IP address from DHCP server. I can't ping any of the DNS servers in generated /etc/resolv.conf which are the same as that of my host

  Read the article

• On Server Disk Storage VS SAN Storage

  - by Justin

  Hello, I am looking at buying three servers, and trying to figure out which storage solution makes the most sense in terms of performance and cost. Total budget is around: $10,000. OPTION 1: Dell servers with RAID 10 (4 Drives) each 7200RPM SAS 500GB, for a total capacity of 1TB. Each server is approx: $3000. Total storage then across all three servers is 3TB. OPTION 2: Same Dell servers with a cheap single drive no RAID for $2000 and go with a centralized SAN solution. The biggest problem is that I haven't been able to even find a SAN solution that is a reasonable price. Dell entry level storage servers are like $15,000. I am thinking just iSCSI, not fiber (too expensive). What do you guys recommend?

  Read the article

• Dell Latitude e6520 gaming capabilities?

  - by user1072185

  I am purchasing a very reduced Dell Latitude e6520 from a friend and was wondering what kinds of games I could play on it and what resolutions. I'm not buying it for gaming purposes, but I am curious. The specs are as follows: Intel® Core™ i7-2720QM (2.20GHz, 6M cache) with Turbo BoostTechnology 2.0 nVidia® NVS™ 4200M 512MB DDR3 Discrete Graphics for Quad Core upon further research, the CPU requires this graphic card. 4.0GB, DDR3-1333MHz SDRAM 500GB 7200rpm Hard Drive I may upgrade to 8GB memory, depending if I am bogged down, what do you guys think?

  Read the article

• VPN only connects to its server!

  - by Eddie

  Hi guys; Previously I bought a windows 2003 VPS and enabled routing and remote access so that users can make a vpn connection. I turend the firewall off and everything was working fine. But since 2 days ago whenever I try and connect to vpn it connects to vpn without any problem and I can see the connection status however it only connects to the server I mean what I can do with this vpn is to connect to the server via remote desktop and I can ping only the server's IP, neither I can open any webpages in browsers or ping other IP addresses beside the server one! I've also rebuilt the server and configured it for routing access and vpn connection from the beginning but it doesn't work either. It seems that server fails to route the traffic properly, as i'm sure that the firewall has been turned off I can't figure out what's the reason, any idea what's going on? Thanks in advance

  Read the article

• Dell R510 vs R710

  - by AX1

  Hello, the Dell R510 and R710 can both hold regular configurations (e.g. X5650, 24 GB RAM, etc.) and these usually come out to about the same price. Is there a particular reason why one would choose the R510 over the R710 or vice versa? There really appears a lack of differentiating factors. The only 'major' factor I found, which doesn't apply to me though, is that the R510 can hold up to 12 3.5in HDDs while the R710 (which is slightly more expensive) can only hold up to 6 3.5in HDDs. Maybe you guys have some input and bought either of these machines (or both) to shed some light on other differences and why someone should choose one over the other as the pricing is pretty much the same with my configuration. Thanks!

  Read the article

• Migrating Shared Hosting and Email

  - by Chrisc

  Hey Guys, I know there has already been a question that has been posted here about migrating shared hosting accounts, but wanted to get a second opinion on my plan to move hosting providers. My business is moving our shared hosting account (hosting and email) to a new provider, and would like to have minimal downtime. Here is our current plan: Create a backup of our old site Upload our site to the new host Set up duplicate email accounts with our new host Change the name server records on our domain to point to our new host Leave our old site up long enough for DNS records to propagate completely. I'm hoping this should result in little downtime for both website and email. Because of the volume of high-importance emails our company receives on a daily basis downtime is very expensive and not tolerated. Thanks, Chris

  Read the article

• Ubuntu Server on Proliant ML350 G4

  - by eduardoavdr

  Hi Everyone, I have been given the task to change OS of a HP Proliant ML350 G4 server, and I decided to use Ubuntu server edition for that matter. The thing is that the server has already installed Windows server 2000 on the only Hard drive it has (SCSI). My question is, could I install an IDE HD on the IDE connection it has and install ubuntu without overwritting the boot configuration, so if I wanted to go back to the windows 2000 server installation with no problems? It also has a tape drive which is used for backups. Do you guys know how buntu deals with such devices? Thanks for your time

  Read the article

• debian modem problems !!!

  - by Raafat

  hay there guys ... I'm a new Debian user, it looks like a very good choice 4 me, every thing is stable, free and easy to use. the problem is, I'm using my modem to establish a dial up connection to the internet (ppp) (a very old stupid way I'm forced to use for now), and using the KPPP application to do that, and nothing is working properly for me. it seems like it didn't recognize my modem or something. i already tried to make a few stuff, and now i know my modem is on /dev/tty0, so i made a link for that on /dev/modem, and query the modem using KPPP and it responded with something like: Ati : Ati0: Ati1: ... ... Ati7: with a textBox to fill up in front of each one of thees Atis, and now, when i press connect on kppp, it says modem ready, and that's it. BTW, my modem is MDC AC'97 any suggestions pleas ....

  Read the article

• Should a webserver in the DMZ be allowed to access MSSQL in the LAN?

  - by Allen

  This should be a very basic question and I tried to research it and couldn't find a solid answer. Say you have a web server in the DMZ and a MSSQL server in the LAN. IMO, and what I've always assumed to be correct, is that the web server in the DMZ should be able to access the MSSQL server in the LAN (maybe you'd have to open a port in the firewall, that'd be ok IMO). Our networking guys are now telling us that we can't have any access to the MSSQL server in the LAN from the DMZ. They say that anything in the DMZ should only be accessible FROM the LAN (and web), and that the DMZ should not have access TO the LAN, just as the web does not have access to the LAN. So my question is, who is right? Should the DMZ have access to/from the LAN? Or, should access to the LAN from the DMZ be strictly forbidden. All this assumes a typical DMZ configuration.

  Read the article

• Data Execution Prevention problem in Windows Server 2008

  - by naveen

  Hi guys, I am an ASP.NET developer, who has minimal knowledge in Server administration. I have a database hosted at Windows Server 2008. Today morning onwards it periodically stops working. The message given is something to the effect "The program is being shut down to prevent Data Execution Prevention error" Some other programs are also showing the behavior. I would like to know, what causes this all of a sudden? The server is UN-protected(IE: no anti-virus installed at all), could this be a possible anti-virus/ malware attack? What do we need to do to get the SOL running smoothly again? Regards, Naveen Jose

  Read the article

• powweb and cloudflare

  - by sonill

  i am using powweb as hosting provider and cloudflare as free cdn. Its been few weeks since my website is down and it says "website down, no cache version available". And to add more to it, I cannot access powweb or any website hosted from powweb from my ISP connection. So i am facing trouble solving my cloudflare issue. I just wanted to know if the problem I am facing is from cloudflare side or powweb side. Some time i can access my website from my end but my friend in another country says its down for days. So is there any suggestion guys?? thank you

  Read the article

• Enabling a trace spec on Glassfish v2

  - by Kiran

  Hi Guys, I guess this might be answered previously but I dont seem to find one answered . Can anyone please lemme know hot to add a trace spec in Glassfish v2. Am very much new to this so not much aware of this. I need to enable a security trace string and orb trace string on Glassfish v2 .On Glassfish v3 I see a file called logging.properties where all the trace string been given , is there any such file on v2 to work with or we need to add a property to domain.xml. Thanks in advance.

  Read the article

• Ubuntu boots into command line instead of X.

  - by Ethan Turkeltaub

  I posted this on the Ubuntu forums and they had no good answer. I hope you guys have a solution! On my relatively new install, it's booting into command line instead of X--again. This is the reason I reinstalled in the first place. This has happened to me three times now. So, I boot up and it gets past GRUB, past the glowing Ubuntu option, then it prompts me for my username, then password. I run: startx And that starts the GUI for about a minute, then it runs the GUI login system. To add to the mess, the network-applet is not shown in the panel. Additionally, Chrome will not launch (I ran Firefox from the terminal). What's the problem here?

  Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >