Search Results

Search found 40479 results on 1620 pages for 'binary files'.

Page 1215/1620 | < Previous Page | 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222  | Next Page >

• Wired connection problem through router

  - by tommypincha

  I'm having trouble to connect my Ubuntu 11.10 to internet through ethernet. I installed a router to get Wi-Fi and now (by a wired connection) I can't have internet with ubuntu (but I can with Windows 7). I see several attempts per minute of the network-manager to get a connection, but after a minute it stops trying. Here are a couple of outputs from key files: cat /etc/network/interfaces auto lo iface lo inet loopback and ifconfig -a eth0 Link encap:Ethernet HWaddr 00:16:76:e4:a6:e8 inet6 addr: fe80::216:76ff:fee4:a6e8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:117 dropped:0 overruns:0 frame:117 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:12221 (12.2 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:582 errors:0 dropped:0 overruns:0 frame:0 TX packets:582 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:46024 (46.0 KB) TX bytes:46024 (46.0 KB) I tried reconnecting the modem and the router and reconnecting the ethernet cable but nothing... I tried other solutions from other posts (this one has a similar issue Wired connection not working) but again nothing. My IP is dynamic. A couple of things I see and did: I see no inet addr, only inet6. I ignored ipv6 from the internet connections, and restarted the network-manager service and nothing. A difference with the post I mentioned is the RX packets with errors I have, is this a clue of the problem? Any help would be appreciated, Thanks!

  Read the article

• Fix a jQuery/HTML5 dynamic content issue by upgrading jQuery

  - by Steve Albers

  The default NuGet template for MVC3 pushes down jQuery 1.5.1.  You can upgrade to a new version (1.7.1 is current when this is written) to avoid a problem with the creation of “unknown” HTML5 tags in IE6-8: Take this sample HTML page using HTML5Shiv to provide support for new HTML5 tags in IE6 – IE8.  The page has a number of <article> tags that are backwards compatible in Internet Explorer 6-8 thanks to the HTML5Shiv. After the article elements there is a jQuery 1.5.1 script tag, and a ready() event handler that appends a footer element with a copyright to each of the article tags.  This appears correctly in IE9, but in older IE browsers the unknown tag problem reappears for the dynamic <footer> elements, even though we have the HTML5Shiv at the top of the page.  The copyright text sits outside of the two separate footer tags. To solve the issue upgrade your jQuery files to an up-to-date version.  For instance in Visual Studio 2010: In the Solution Explorer right click on References and choose Manage NuGet Packages. In the Manage NuGet Packages window select the jQuery item on the middle of the page and click the “Upgrade” button. You may need to upgrade your script src references to point at the new version. Using the updated jQuery library the incorrect tags should disappear and styles should work properly:   You can find more information about the issue on the jQuery Bug Tracker site.

  Read the article

• Need help eliminating dead code paths and variables from C source code

  - by Anjum Kaiser

  I have a legacy C code on my hands, and I am given the task to filter dead/unused symbols and paths from it. Over the time there were many insertions and deletions, causing lots of unused symbols. I have identified many dead variables which were only being written to once or twice, but were never being read from. Both blackbox/whitebox/regression testing proved that dead code removal did not affected any procedures. (We have a comprehensive test-suite). But this removal was done only on a small part of code. Now I am looking for some way to automate this work. We rely on GCC to do the work. P.S. I'm interested in removing stuff like: variables which are being read just for the sake of reading from them. variables which are spread across multiple source files and only being written to. For example: file1.c: int i; file2.c: extern int i; .... i=x;

  Read the article

• Lost WiFi after 12.10 upgrade

  - by Steven Guillory

  I received my new Dell Vostro 2420 last week, and just got around to upgrading from 11.10 to 12.10. Unfortunately, like many others (after researching the issue), I no longer have WiFi. I have tried every sudo command given that worked for others, and still can't get my wireless to function. I am new to Linux, so any and all help is appreciated. Thanks in advance! Edit: I can connect via ethernet, just not via wifi. As a matter of fact, when I use Fn + F2 to turn on wifi, only my bluetooth comes on. lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 07:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) This is what I am getting... dpkg: error: --install needs at least one package archive file argument Type dpkg --help for help about installing and deinstalling packages [*]; Use dselect or aptitude for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through less or more !

  Read the article

• ORAchk version 2.2.5 is now available for download

  - by Gerry Haskins

  Those awfully nice ORAchk folks have asked me to let you know about their latest release... ORAchk version 2.2.5 is now available for download, new features in 2.2.5: Running checks for multiple databases in parallel Ability to schedule multiple automated runs via ORAchk daemon New "scratch area" for ORAchk temporary files moved from /tmp to a configurable $HOME directory location System health score calculation now ignores skipped checks Checks the health of pluggable databases using OS authentication New report section to report top 10 time consuming checks to be used for optimizing runtime in the future More readable report output for clusterwide checks Includes over 50 new Health Checks for the Oracle Stack Provides a single dashboard to view collections across your entire enterprise using the Collection Manager, now pre-bundled Expands coverage of pre and post upgrade checks to include standalone databases, with new profile options to run only these checks Expands to additional product areas in E-Business Suite of Workflow & Oracle Purchasing and in Enterprise Manager Cloud Control ORAchk has replaced the popular RACcheck tool, extending the coverage based on prioritization of top issues reported by users, to proactively scan for known problems within the area of: Oracle Database Standalone Database Grid Infrastructure & RAC Maximum Availability Architecture (MAA) Validation Upgrade Readiness Validation Golden Gate Enterprise Manager Cloud Control Repository E-Business Suite Oracle Payables (R12 only) Oracle Workflow Oracle Purchasing (R12 only) Oracle Sun Systems Oracle Solaris ORAchk features: Proactively scans for the most impactful problems across the various layers of your stack Streamlines how to investigate and analyze which known issues present a risk to you Executes lightweight checks in your environment, providing immediate results with no configuration data sent to Oracle Local reporting capability showing specific problems and their resolutions Ability to configure email notifications when problems are detected Provides a single dashboard to view collections across your entire enterprise using the Collection Manager ORAchk will expand in the future with high impact checks in existing and additional product areas. If you have particular checks or product areas you would like to see covered, please post suggestions in the ORAchk subspace in My Oracle Support Community. For more details about ORAchk see Document 1268927.2

  Read the article

• How can Agile methodologies be adapted to High Volume processing system development?

  - by luckyluke

  I am developing high volume processing systems. Like mathematical models that calculate various parameters based on millions of records, calculated derived fields over milions of records, process huge files having transactions etc... I am well aware of unit testing methodologies and if my code is in C# I have no problem in unit testing it. Problem is I often have code in T-SQL, C# code that is a SQL stored assembly, and SSIS workflow with a good amount of logic (and outcomes etc) or some SAS process. What is the approach YOu use when developing such systems. I usually develop several tests as Stored procedures in a designed schema(TEST) and then automatically run them overnight and check out the results. But this is only for T-SQL. And Continous integration IS hard. But the problem is with testing SSIS packages. How do You test it? What is Your preferred approach for stubbing data into tables (especially if You need a lot data initialization). I have some approach derived over the years but maybe I am just not reading enough articles. So Banking, Telecom, Risk developers out there. How do You test your mission critical apps that process milions of records at end day, month end etc? What frameworks do You use? How do You validate that Your ssis package is Correct (as You develop it)/ How do You achieve continous integration in such an environment (Personally I never got there)? I hope this is not to open-ended question. How do You test Your map-reduce jobs for example (i do not use hadoop but this is quite similar). luke Hope that this is not too open ended

  Read the article

• Can I distribute a software with the following permission notice

  - by Parham

  I've recently written a piece of software (without any other contributors) for a company which I part own. I was wondering if I could distribute it with the following permission notice, which is a modified version of the MIT License. Are there any obvious risks if I do distribute with this licence and does it give me the right to reuse the code in other projects? Permission is hereby granted, to any person within CompanyName (the "Company") obtaining a copy of this software and associated documentation files, excluding any third party libraries (the "Software"), to deal with the Software, with limitations restricted to use, copy, modify and merge, the Software may not be published, distributed, sublicensed and/or sold without the explicit permission from AuthorName (the "Author"). This notice doesn't apply to sections of the Software where copyright is held by any persons other than the Author. The Author remains the owner of the Software and may deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software. The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

  Read the article

• htaccess correct, Apache logs still showing the evil visitors with 200 code

  - by bulgin

  I hope someone can help me. Please take a look at the following snippet of Apache logs: 95-169-172-157.evilvisitor.com - - [12/Nov/2012:09:46:02 -0500] "GET /the-page-I-dont-want-to-deliver.html HTTP/1.1" 200 9171 "http://hackers.ru/" "Mozilla/4.0 (MSIE 6.0; Windows NT 5.1; Search)" I have the following included in my .htaccess for the root directory of the website and there are no other .htaccess files anywhere that would affect this: RewriteEngine On Options +FollowSymLinks ServerSignature Off ErrorDocument 403 "Nothing Interesting Here" order allow,deny deny from evilvisitor.com deny from hackers.ru deny from anonymouse.org allow from all I also have GeoIP functioning properly and have this included there: #for stuff from different countries RewriteCond %{ENV:GEOIP_COUNTRY_CODE} ^(UA|TR|RU|RO|LV|CZ|IR|HR|KR|TW|NO|NL|NO|IL|SE) RewriteRule ^(.*)$ [R=F,L I know this works because whenever I attempt to access the website from a proxy in say, Spain, I get the error message. I also know it works because when accessing the website from anonymouse.org, the proper error code page is displayed. So then why am I still getting these visitors who successfully access the page I don't want them to see with an Apache 200 code when it should be an error code?

  Read the article

• Free space in tmpfs partition not adding up

  - by Dean Herbert

  I have had my /tmp/ partition filling up recently when it should not be anywhere near full. On further investigation, I found that the partition was listing free space a lot lower than it should be. I am guessing a remount will fix this, but am very curious as to why this has happened and where this space has gone. du output: root@odoroki:/tmp# du --summarize -h 3.3M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.3G 653M 84% /tmp Update: after deleting some files it has happened again. du output: root@odoroki:/tmp# du -h --summarize 11M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.9G 0 100% /tmp I have a feeling this has started since a recent apt-get upgrade, but it still seems like strange behaviour. I did do a quick scan over lsof output and couldn't see any open/stuck file handles. Unfortunately due to the seriousness of the issue I had to reboot the server, after which usage seems to match correctly.

  Read the article

• How to Pin Any File to the Start Screen in Windows 8

  - by Taylor Gibb

  By default Windows 8 only allows you to pin a few file types to the Start Screen. Read on to find out how you can change that by editing the registry. How to Pin Any File to the Start Screen in Windows 8 Press the Win + R keyboard combination to open a run box, then type notepad and press enter. When notepad opens, paste the following into the new document: Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\*\shell\pintostartscreen] “MUIVerb”=”@shell32.dll,-51201″ “NeverDefault”=”" “Description”=”@shell32.dll,-51202″ “MultiSelectModel”=”Single” [HKEY_CLASSES_ROOT\*\shell\pintostartscreen\command] “DelegateExecute”=”{470C0EBD-5D73-4d58-9CED-E91E22E23282}” Then click on the File menu item and select save as… Before you go any further, change the Save as type to All Files. Then give your file a name ending in .reg and click Save. PinToStartHack.reg To use the hack, just double click on the .reg file you just created. When you are prompted about whether you want to continue, click Yes. Now you can pin any file to the Start Screen. Undo the Change If you ever wish to undo the change, press the Win + R keyboard combination and type regedit, then press enter. Then drill down into: HKEY_CLASSES_ROOT\*\shell\ Finally delete the pintostartscreen key. That’s all there is to it. How to Factory Reset Your Android Phone or Tablet When It Won’t Boot Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode

  Read the article

• Ubuntu 13.04 alongside Windows 8 - How to partition from Windows

  - by mengelkoch

  I plan to install Ubuntu 13.04 alongside Windows 8, and I'm looking for a CLEAR answer on how to conduct partitioning appropriately. I'm very new to all of this so a thorough explanation with minimal jargon would be great. I have an Acer Aspire M5 x64 with 6G RAM. I think I already figured out how to deal with the fast startup, UEFI and SecureBoot issues (I disabled fast startup and disabled Secure Boot). I am able to boot into Ubuntu from a LiveUSB, and I think I am ready to install Ubuntu. Note - despite some advice found here, I do have to disable SecureBoot to boot 13.04 from my LiveUSB. From what I have read here, it seems that I should (at least at first) create the partitions from WITHIN Windows 8, not from the LiveUSB, to avoid reported problems. I have run compmgmt.msc and I see the existing partitions. I see the following: Disk 0: 400 MB Recovery; 300 MB EFI System; Acer (C:) 444.95 GB (Boot, Page File, Crash Dump, Primary Partition); 20 GB Recovery Disk 1: 3.74 GB Primary Partition; 14.90 GB Primary Partition I gather I need to create a mounting point '/' Partition (??), a swap partition, and a home partition. Please explain what these are, how big they should be, how I create them from Windows Disk Management, and anything else I need to know. Eventually, I plan to fully replace Windows 8 with Ubuntu, but for now I want to run alongside Windows 8 and not screw things up. I don't have any critical files saved on this computer yet. Thanks.

  Read the article

• Failure to Boot Windows 7 after Ubuntu install

  - by Mike

  My computer is a (brand new) PC notebook, without a CD drive running Windows 7. I followed this page to install from USB: https://help.ubuntu.com/community/Installation/FromUSBStickQuick The installation went well and i am using Ubuntu now (v. 12.04 i believe) I want to be able to dual boot Ubuntu and Win7 The problem is that the disc partitioning during the Linux install caused a problem with Windows, caused some problem with windows, and windows can no longer boot when i choose it at the GNU GRUB screen. When i restart my computer i can successfully boot Linux, but not Windows 7. At the GRUB screen - if i run Win7 normally, it freezes, shows a blue screen, and returns back to GRUB - if i run Win7 recovery, i dont know how to access the files that i need in order to run windows again, so nothing helpful happens. Can you please tell me what i would need to do(or link a guide) in order to run Windows again. (Windows and Linux is preferable, but if thats impossible going back to only Windows will help too) Im guessing the easiest thing to do is just to reinstall both OS, or is there anyway to undo the partition i made during the install? Thanks

  Read the article

• nvidia: switching dvi socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Creating a backup - Rsync - Connection refused (111)

  - by pablofiumara

  I am trying to create a backup of my website for free. I just want to have a backup of my website, including not only all files and the configuration but also the databases. I mean, a full backup. If it can be done automatically, it would be better. I feel there are better ways than using the cpanel to achieve that (actually, I believe sometimes web hosters does not have any cpanel). I read the following on how to do it: Automatically mirror the entire contents and configuration of your main server to a secondary backup server on a completely separate network in a different data centre. Use RSync, FXP, cPanel voodoo, or whatever method you wish to automate syncing. That is why I installed Rsync Daemon which is an alternative to SSH for remote backups. I configured it but the test went wrong. The terminal is showing me this: pablofiumara@pablofiumara-Lenovo-G470:~$ sudo rsync [email protected]::share [sudo] password for pablofiumara: rsync: failed to connect to pablofiumara.com (50.87.147.75): Connection refused (111) rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9] pablofiumara@pablofiumara-Lenovo-G470:~$ sudo rsync [email protected]::share failed to connect to 50.87.147.7 (50.87.147.7): Connection refused (111) rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9] What should I do? Is there a better or easier way to achieve what I wish (I mentioned this in the first paragraph)?

  Read the article

• Scripting language for filling out web form

  - by ityler22

  I have a job as an intern at a technology company, I was given the unfortunate job of performing some data entry into our web management system. The information entered into the web form is stored in a MySQL DB. Upon receiving the data I realized I would have to submit this online form about 1000 different times all consisting of about 10 different text fields / check boxes per form. (So in other words, would be completely mind numbing and be a ridiculous waste of time and resources, or so I thought...) Having used databases a good bit prior to this, my immediate reaction was to just write a short MySQL script to bulk import all of the data, especially since it was already presented to me in an excel spreadsheet ready to go. Thought it may have been some sort of a test since it seemed too obvious. I wrote the script which consisted of about 10 lines of code but was then informed I couldn't be trusted with MySQL Admin privileges to run said script. So my next thought would be to write a script to just enter the information through the web form (Which will take ten times longer but it's what I have to) Being unfamiliar with scripting of this nature (seems like I would need something similar to a bot, but the good kind) I was unsure of how to proceed to do this. Is there a preferred language to use to enter the data i have into the web form I do have access to? I'm not particularly looking for this to be done for me by any means just a nice point in the right direction as far as what scripting language to use and how to pair that with the data I have that needs to be entered. Thanks for the help/ valuable input! EDIT: Is there a way to perform this using perl without having access to place any files on the server? Would I be able to run some Javascript loops to pull the data out of .csv or just a .txt format with line delimiters and insert it into the web form?

  Read the article

• Ubuntu 12.04 using b43-fwcutter

  - by Nathan

  I have used 10.04 with the b43-fwcutter driver to drive my BCM4318 Broadcom card (a Linksys WPC54G v3) on my old Dell Inspiron 8100 for two years+ with no troubles. I just upgraded to 12.04 and although everything worked fine after install, before I added the b43-fwcutter driver, once I installed the driver, the system refuses to boot. Even before I install the Linksys card!! It just hangs on boot with graphical garbage on the screen. I tried several attempts to recover the system using the live CD, and finally reinstalled completely. I have been thru the cycle, install fresh system, verify everything works, then install b43-fwcutter and it is hung, several times. Consistent hard fail. The system runs fine on hardwire Ethernet, and wireless was fine on 10.04. But I cannot get there with 12.04. So after several attempts, I am now ready to admit defeat and ask for help. I have read every thread that search turned up, and either the advice is to do what I did, i.e. install fwcutter, or does not apply (Different Broadcom, STA, legacy, whatever) So what do I need to do to fix it? Or is the B43-fwcutter driver broken for 12.04? Thoughts? Tips? Log files needed??

  Read the article

• Windows 7 and Ubuntu Boot/Corruption Problems

  - by Kiraisuki

  I searched around, but I couldn't find the answer to why Windows 7 Ultimate 64x and Ubuntu 12.04 LTS 64x could'nt live together happily on my Asus G1s-X1 laptop. I had Windows 7 Ultimate 64x installed on the laptop when I bought it (bought it used, it comes with Vista new) and I wanted to try out Ubuntu and see what all the hype about the free OS was. I installed Ubuntu on an external 80GB iomega HDD with Windows 7 on my main drive. They both work fine for about 2-3 weeks, until Ubuntu suddenly is unable to boot. A few days after Ubuntu fails, Windows corrupts majorly (winload.exe, ntkrnlpa.exe, and various others corrupt randomly) and Windows Recovery Environment is completely useless. Booting to a live USB with Ubuntu and trying to reinstall it fails, and trying to wipe the main drive and install it there fails as well (something about my graphics card.) I managed to get Windows 7 Ultimate 64x back up and running (after many disk formats) but now I am left with a broken (and invisible) Ubuntu installation on the external drive. Is there any way to get the broken and non-bootable Ubuntu installation off the HDD without damaging or erasing the many files and programs installed and stored on the 80GB drive?

  Read the article

• Terminal/Putty showing control characters (^M) after updating

  - by jaycee48

  I updated my system yesterday afternoon using the recommended updates from Update Manager. After it completed, I shutdown my system and went home for the day. I come in this morning and I am getting control characters displayed when using vi in both the standard terminal emulator, putty, and putty inside of my Windows virtual that I run with VirtualBox. I have made no other system changes and I cannot figure out how this occurred. It's as if every text file I have was created in DOS. I've searched the forums and I haven't found any answers. I am using xterm as my emulator and I checked with 3 of my coworkers and none of them are having this problem so we do not believe it is a server side issue. Especially since I've checked 3 different servers. There's nothing in my .profile other than PATH variables so I'm using the same terminal settings as everyone else. Some files are fine (I can open and read both /etc/environment and my .profile) but most of any kind of server generated log file is trash. Running cat or head on the same file displays the contents without the characters. Any ideas would be appreciated. Thanks.

  Read the article

• How to Turn Your Home Ubuntu PC Into a LAMP Web Server

  - by YatriTrivedi

  Got a Linux PC you want to put to work? Maybe you’re not comfortable with the command-line only version of Ubuntu Server Edition. Here’s how to keep the standard Ubuntu desktop and add web-serving capabilities to it. Whether you’re not comfortable with a command-line only system, you’re using your Ubuntu desktop for other things, or you just need it installed for a few particular apps, you can add Apache, MySQL, and PHP to any standard desktop installation of Ubuntu very quickly and easily Latest Features How-To Geek ETC How to Integrate Dropbox with Pages, Keynote, and Numbers on iPad RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin The How-To Geek Video Guide to Using Windows 7 Speech Recognition Stylebot Customizes Web Pages in Chrome, Now Has Downloadable Styles Blackberry, Dell, Apple, and Motorola Tablets Compared [Infographic] Encrypt Your Google Search Queries Vintage Posters Showcase the History of Tech Advertising Google Cloud Print Extension Lets You Print Doc/PDF/Txt Files from Web Sites Hack a $10 Flashlight into an Ultra-bright Premium One

  Read the article

• ATI Radeon HD with Catalyst driver stuck mirroring screens

  - by Mike Axiak

  In 11.10 I replaced my aging Nvidia card with a new Radeon HD 6970 card. The single card has two DVI output ports which I've connected to two monitors. I installed Catalyst version 11.9 and I cannot get multiple monitors set up the way I want. I tried: $ sudo amdcccle and setting the mode to single desktop multiple monitors and whenever I do that Unity crashes and I get back to the login screen. Nothing shows up in the Xorg.*.log files for me to post here. There's only one card so I don't think xinerama would be any help here. Anyone have any ideas? EDIT: Here's my xorg.conf file: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "75" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "amdcccle-Device[5]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:5:0:0" Screen 1 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[5]-1" Device "amdcccle-Device[5]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• The Enterprise Side of JavaFX: Part Two

  - by Janice J. Heiss

  A new article, part of a three-part series, now up on the front page of otn/java, by Java Champion Adam Bien, titled “The Enterprise Side of JavaFX,” shows developers how to implement the LightView UI dashboard with JavaFX 2. Bien explains that “the RESTful back end of the LightView application comes with a rudimentary HTML page that is used to start/stop the monitoring service, set the snapshot interval, and activate/deactivate the GlassFish monitoring capabilities.”He explains that “the configuration view implemented in the org.lightview.view.Browser component is needed only to start or stop the monitoring process or set the monitoring interval.”Bien concludes his article with a general summary of the principles applied:“JavaFX encourages encapsulation without forcing you to build models for each visual component. With the availability of bindable properties, the boundary between the view and the model can be reduced to an expressive set of bindable properties. Wrapping JavaFX components with ordinary Java classes further reduces the complexity. Instead of dealing with low-level JavaFX mechanics all the time, you can build simple components and break down the complexity of the presentation logic into understandable pieces. CSS skinning further helps with the separation of the code that is needed for the implementation of the presentation logic and the visual appearance of the application on the screen. You can adjust significant portions of an application's look and feel directly in CSS files without touching the actual source code.”Check out the article here.

  Read the article

• Connect to NFS on availability

  - by berkes

  What would be a good way to automatically mount an NFS when it gets/is available? I have the following: Media server at home, running Ubuntu, 10.10 with GUI *) Laptop often at home, often on the road or at clients. Ubuntu 10.10 with GUI. What I'd like is my laptop connecting to the nfs (or any other mountable networked filesystem) so that Banshee sees all the music, new podcast-entries (and video) from that media-server. I already have firefly (mt-daapd) running, which works, but is flakey on both server-side and client-side. But its biggest downside, is that I cannot easily fix metadata on files on the media-server this way. DAAP is read-only by design. I can mount nfs manually, through a sudo mount /media/nfsmultimedia/. I am not looking for a manual, or howto on setting up a NFS client and server. Merely a way to have this more transparently working. Obviously I'd like the NFS to be unmounted if the network is no longer available (i.e. when I open my laptop-lid on my clients buro). It may be, that an NFS is not suited for this, in that case, I'd love to hear other options. :) *) Actually: I also have a fileserver, backupserver and webserver to which I'd like to connect in a somewhat similar way. Right now I connect to these over SSH, using gvfs.

  Read the article

• Creating a bootable flash without overlayfs

  - by Septagram

  I want to create an USB stick to carry my Ubuntu everywhere around with me. It's not intended to spread Ubuntu by installing it everywhere, but rather for running my configured system on any computer I come across. So far, I went with installing Ubuntu with unetbootin, however, I have some issues with this. When installed with netbootin, the original disk image is kept intact on the flash drive, forever. Also, a file is created for persistent storage and during boot it is accessed together with the image by overlayfs. This, in my opinion, has the following problems: If system is updated regularly, then files from the image are overwritten in persistent storage, doubling their size and wasting precious space. Persistent storage has a fixed size that you have to define from the start, again, wasting precious space. I'm not 100% sure, but maybe using overlayfs makes disk access slower, and more so on the relatively slow devices. So I'd like to find another solution: either to get rid of the original image or to install Ubuntu "normally" on the separate ext2 partition, or maybe even install it in the main vfat partition on the USB stick. Suggestions?

  Read the article

• Best Architecture for ASP.NET WebForms Application

  - by stack man

  I have written an ASP.NET WebForms portal for a client. The project has kind of evolved rather than being properly planned and structured from the beginning. Consequently, all the code is mashed together within the same project and without any layers. The client is now happy with the functionality, so I would like to refactor the code such that I will be confident about releasing the project. As there seems to be many differing ways to design the architecture, I would like some opinions about the best approach to take. FUNCTIONALITY The portal allows administrators to configure HTML templates. Other associated "partners" will be able to display these templates by adding IFrame code to their site. Within these templates, customers can register and purchase products. An API has been implemented using WCF allowing external companies to interface with the system also. An Admin section allows Administrators to configure various functionality and view reports for each partner. The system sends out invoices and email notifications to customers. CURRENT ARCHITECTURE It is currently using EF4 to read/write to the database. The EF objects are used directly within the aspx files. This has facilitated rapid development while I have been writing the site but it is probably unacceptable to keep it like that as it is tightly coupling the db with the UI. Specific business logic has been added to partial classes of the EF objects. QUESTIONS The goal of refactoring will be to make the site scalable, easily maintainable and secure. 1) What kind of architecture would be best for this? Please describe what should be in each layer, whether I should use DTO's / POCO / Active Record pattern etc. 2) Is there a robust way to auto-generate DTO's / BOs so that any future enhancements will be simple to implement despite the extra layers? 3) Would it be beneficial to convert the project from WebForms to MVC?

  Read the article

• Operating System not Found after installing Ubuntu in a Sony Vaio

  - by diego8arock

  I just bought a Sony Vaio SVS15115FLB that came with Windows 7, after enjoying the PC graphic power for a little, I decided it was time to install Ubuntu 12.04. First, I inserted a USB stick, reboot, press F11 but a message saying that no OS was found on the USB, so then I used a live CD. It booted fine and I installed Ubuntu, then when it was time to restart the PC, it didn't boot to GRUB but it went straight to Windows and it began an startup error and was looking for a solution, after it was done, it restarted and then it booted again to Windows and to the same start up error solution thing. I freaked out, so I booted again the Ubuntu live CD, and installed Ubuntu over everything, after it installed I rebooted and then a message appeared saying Operating system Not Found, and I have no idea why. So I Googled again and found this post on Boot Partition, I did everything exactly on that post, but it didn't work (by the way, this was the message): The boot files of [Ubuntu 12.04 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. It appeared the first time, then I did it all again and then it was gone. I rebooted and nothing, the same Operating System not found message appeared. So I decided to create a partition for Windows, hoping for something, but the message still appears. I really have no idea what to do, but there is something odd, if I insert the USB stick containing Ubuntu 11.10, the message that says that there is no OS in the PendDrive flashes for a fraction of a second and the boot straight to Ubuntu 12.04 without problems (and booted to Windows when I installed it, ignoring Ubuntu), right now I'm using it like that, but its pretty annoying. Can anyone advise me how to fix this? I'm no expert on this kind of things (boot, GRUB, recovery and stuff like that).

  Read the article

< Previous Page | 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222  | Next Page >