Search Results

Search found 15926 results on 638 pages for 'business card'.

Page 122/638 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

  • What causes "All-in-one USB Card Reader" to create 6 drives that always appear in Disk Management?

    - by tim11g
    I installed a "All-in-one USB Card Reader" to read SD cards and other media. It has caused six new drives to appear in Disk Management with six new drive letter assignments. These drives and letters are always present, even when there are no cards in the reader. When unused, they are labeled "No Media". Why does this multifunction reader cause these phantom Disks to appear and consume drive letters? Every USB port can (and does) allow removable media to be mounted and assigned a drive letter, and the drive letter assignment "disappears" when the USB drive is removed. Why are these card reader's drives and letters staying allocated permanently? Is there anything that can be done to make the slots work like a typical USB drive? (The reader is in fact connected to USB).

    Read the article

  • Unable to make properly work the Ralink rt3090 wifi card on my Lenovo B575 with Kubuntu 12.04 64bit

    - by Sebastien
    I look and tried many solution from many thread but I still unable to make this wifi card work properly (very slow, unable to connect to some wifi spot, etc.). I tried to compile the driver from the ralink website but it doesn't work. Tried to blacklist many mod, withou any result. So here are some command results, hope their help you help me: lspci sebastien@sebastien-portable:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Wrestler [Radeon HD 6310] 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) 00:15.2 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB900 PCI to PCI bridge (PCIE port 2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 03:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe lsmod sebastien@sebastien-portable:~$ lsmod Module Size Used by rt2800pci 18715 0 arc4 12529 2 rt2800lib 58925 1 rt2800pci crc_ccitt 12667 1 rt2800lib rt2x00pci 14577 1 rt2800pci rt2x00lib 55301 3 rt2800pci,rt2800lib,rt2x00pci mac80211 506816 3 rt2800lib,rt2x00pci,rt2x00lib cfg80211 205544 2 rt2x00lib,mac80211 eeprom_93cx6 12725 1 rt2800pci rt2860sta 864748 0 snd_hda_codec_conexant 62128 1 snd_hda_codec_hdmi 32474 1 uvcvideo 72627 0 rts5139 351143 0 snd_hda_intel 33773 4 videodev 98259 1 uvcvideo snd_hda_codec 127706 3 snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec psmouse 87692 0 v4l2_compat_ioctl32 17128 1 videodev serio_raw 13211 0 k10temp 13166 0 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec sp5100_tco 13791 0 i2c_piix4 13301 0 snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi ideapad_laptop 18234 0 sparse_keymap 13890 1 ideapad_laptop rfcomm 47604 0 joydev 17693 0 snd_seq_midi_event 14899 1 snd_seq_midi bnep 18281 2 bluetooth 180104 10 rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 18 snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd mac_hid 13253 0 snd_page_alloc 18529 2 snd_hda_intel,snd_pcm lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid r8169 62099 0 radeon 804372 4 video 19596 0 wmi 19256 0 ttm 76949 1 radeon drm_kms_helper 46978 1 radeon drm 242038 6 radeon,ttm,drm_kms_helper i2c_algo_bit 13423 1 radeon iwconfig sebastien@sebastien-portable:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"4CE6763F0E0A" Mode:Managed Frequency:2.452 GHz Access Point: 4C:E6:76:3F:0E:0A Bit Rate=54 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:100 Missed beacon:0 eth0 no wireless extensions.

    Read the article

  • Problem with Graphics Card, Power Supply or Mother Board?

    - by Rick Siegert
    I have a problem that is driving me to the edge. My graphics card periodically looses power for a moment, then comes back. Once in a while it takes much longer, like 5 minutes. I have always tried rebooting during that period, since I don't know then. Black screen, with a no power message across my monitor. All equipment is only a few months old. The Motherboard is a few months old, MSI N9A2 Platinum Revision 1 (AMD). The Video Card is a Gigabyte Radeon HD 4850 1GB. The power supply is an Ultra 700w My OS is Xp Pro, sp3 Any ideas or suggestions how to solve this

    Read the article

  • RTL8168B/8111B Lan card is not detected in Redhat..Error is make ***/lib/modules/2.6.18-53.e15/build

    - by Deepak Narwal
    0 Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1.Redhat is not picking up this model of Lan card automaticlly. I tried it by downloading from realtak site for this particular model and find some .tar packages for my kernal and when i tried to install them ... check old drivers & unload it build the module and install make */lib/modules/2.6.18-53.e15/build: no such file or directory stop make[1]: *[modules] error 2 make : [modules] error 2 i downloaded tar files from sites and unpack according to their instrution i tried to run autorun.sh script as mentioned in readme file but after doing this it is showing above error... Now what to do i am not getting

    Read the article

  • BI&EPM in Focus April 2012

    - by Mike.Hallett(at)Oracle-BI&EPM
    General News Oracle OpenWorld call for papers now open, now through April 9 (link) Oracle Announces Availability of Oracle Exalytics In-Memory Machine (link) Oracle EPM and BI Support Newsletter Current Edition - Volume 3 : March 2012 (link) Customers Asiana Airlines Improves Passenger Management with Near-Real-Time Reservation and Ticketing Information  Centraal Boekhuis Delivers Faster with Oracle BI 11g Essatto Software Speeds Data Aggregation Tenfold; Integrates BI, Performance Management, and Data Warehousing for Midsize Businesses Grupo WTorre Supports Management's Decision-Making with OBIEE, Ensuring Uniform, Reliable, and Consistent Data Indian Overseas Bank Cuts Planning Schedule by 45 Worker Days per Year, Assesses Market Risk Instantly with Business Intelligence System Kentucky Community and Technical College System Enables Data-Driven Decision-Making Using Integrated System with Management Dashboards National Australia Bank Achieves 200% ROI, Improves Data Quality and Reporting Integrity with Oracle Hyperion DRM R.L. Polk & Co. Enhances Business Intelligence Capabilities, Optimizes System Performance with Extreme Analytics Machine Test ResCare, Inc. Transforms Reporting to Improve Healthcare Service Performance with Oracle Business Analytics  Rochester City School District Uses OBIEE to Track Student Achievement, Identify Areas for Improvement, Accelerate Reporting  Société Générale Standardizes, Accelerates, and Improves Budget Planning Accuracy across Global Enterprise The State Accounting Office of Georgia Integrates Financial Information, Shortens Financial Closings and Streamlines Reporting across 175 Organizations   Events 4-day Oracle Real-Time Decisions Hands-on Technical Workshop for Partners (PTS, Free) May 14-17, 2012: Colombes, Paris, France Nordic events : “Latest Release of Oracle Hyperion EPM and BI Suites Helps Organizations Plan through Uncertainty, Improve Decision-Making and Meet Regulatory Requirements” (April 17, Sweden | April 18, Norway | April 19, Denmark | April 24, Finland) Webcast Replay from Balaji Yelamanchili and Paul Rodwick: “Analytics Without Limits - The Latest on Oracle Exalytics In-Memory Machine and Oracle Business Intelligence”  (link)  Wednesday, April 04, 2012: Business Analytics launch webcast: Invite your customers to register (link) Big Data Online Forum now available on Demand (link)  Enterprise Performance Management Webcast Replay: Accurate Forecasting within the Business Planning Cycle (link) Oracle Hyperion Profitability and Cost Management (HPCM) Master Support Note (link) Business  Intelligence Whitepaper: Driving Innovation Through Analytics (link) Gartner: CIOs Identify BI as the No. 1 Technology Priority for 2012 (link) Webcast Replay: Exalytics in Action: Airlines, US Census and Federal Spending Demo Applications  (link) NEWLY RELEASED Walk-in Video for Exalytics - Use This to Start Customer/Partner Meetings! (link) IDC Insight Paper: “Oracle's All-Out Assault on the Big Data Market: Offering Hadoop, R, Cubes, and Scalable IMDB in Familiar Packages” (link) System Requirements and Supported Platforms for Oracle Business Intelligence Suite Enterprise Edition 11gR1 Certification Matrix now published to include OBIEE 11.1.1.6.0 (link) Maintenance Release Guide (List of Bugs Fixed) for Oracle Business Intelligence Enterprise Edition (OBIEE) 11.1.1.6.0  (link) OBIEE 11.1.1.6: Is OBIEE 11.1.1.6 Certified With OBI Apps 7.9.6.3?  (link) Information Center: Troubleshooting Oracle Business Intelligence Applications (support login req'd)  (link)      

    Read the article

  • Reminder: ATG Live Webcast Feb. 24th: Using the R12 EBS Adapter

    - by Bill Sawyer
    Reminder: Our next ATG Live Webcast is happening on 24-Feb. The event is titled:E-Business Suite R12.x SOA Using the E-Business Suite AdapterThis live one-hour webcast will offer a review of the Service Oriented Architecture (SOA) capabilities within E-Business Suite R12 focusing on the E-Business Suite Adapter. While primarily focused on integrators and developers, understanding SOA capabilities is important for all E-Business Suite technologists and superusers.

    Read the article

  • OBIEE version 11.1.1.7.131017 has been released

    - by inowodwo
    The Business Intelligence Enterprise Edition 11.1.1.7.131017 patch set has been released, and is available to download from My Oracle Support (https:\\support.oracle.com). Per the patch readme: This patch set is available for all customers who are using Oracle Business Intelligence Enterprise Edition 11.1.1.7.0 and 11.1.1.7.1. It is also available for Exalytics customers who have applied the Exalytics PS3 patch. Patch 17530796 - OBIEE BUNDLE PATCH 11.1.1.7.131017 (Patch) is comprised of the following patches, which are not available separately:     Patch 16913445 - Patch 11.1.1.7.131017 (1 of 8) Oracle Business Intelligence Installer (BIINST)     Patch 17463314 - Patch 11.1.1.7.131017 (2 of 8) Oracle Business Intelligence Publisher (BIP)     Patch 17300417 - Patch 11.1.1.7.131017 (3 of 8) Enterprise Performance Management Components Installed from BI Installer 11.1.1.7.0 (BIFNDNEPM))     Patch 17463395 - Patch 11.1.1.7.131017 (4 of 8) Oracle Business Intelligence Server (BIS)     Patch 17463376 - Patch 11.1.1.7.131017 (5 of 8) Oracle Business Intelligence Presentation Services (BIPS)     Patch 17300045 - Patch 11.1.1.7.131017 (6 of 8) Oracle Business Intelligence Presentation Services (BIPS)     Patch 16997936 - Patch 11.1.1.7.131017 (7 of 8) Oracle Business Intelligence Presentation Services (BIPS)     Patch 17463403 - Patch 11.1.1.7.131017 (8 of 8) Oracle Business Intelligence Platform Client Installers and MapViewer Also you must download: Patch 16569379 - Dynamic Monitoring Service patch The instructions to apply the bundle patch are given in the patch readme along with some important notes if you are upgrading from 11.1.1.6.x versions. The new functionality in this patch includes:     Support for Microsoft Internet Explorer 10     Support for Oracle BI Mobile App Designer     Support for improved exporting functionality into Microsoft Excel For more information please refer to document: OBIEE 11g 11.1.1.7.131017 is Available for Oracle Business Intelligence Enterprise Edition and Exalytics (Doc ID 1595219.1) In addition we strongly recommend you review this document: OBIEE Suite Bundle Patches (Doc ID 1591422.1), which explains the new naming convention, the strategy behind bundle patches and other interesting facts about OBIEE patching. Please take some time to review it.

    Read the article

  • APress Deal of the Day 22/Dec/2010 - Pro BAM in BizTalk Server 2009

    - by TATWORTH
    Another $10 bargain from Apress available to 08:00 UTC on Dec/23 Pro BAM in BizTalk Server 2009 Business Activity Monitoring, or BAM, provides real-time business intelligence by capturing data as it flows through a business system. By using BAM, you can monitor a business process in real time and generate alerts when the process needs human intervention. Pro Business Activity Monitoring in BizTalk 2009 focuses on Microsoft's BAM tools, which provide a flexible infrastructure that captures data from Windows Communication Foundation, Windows Workflow Foundation, .NET applications, and BizTalk Server. $49.99 | Published Jul 2009 | Jeff Sanders

    Read the article

  • WebCenter Customer Spotlight: Indecopi

    - by me
    Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryIndecopi Optimizes Patent Approval Management and Accelerates Customer Service Times by 40% Indecopi is a decentralized public agency that promotes the country’s markets and protects consumer rights. It promotes fair and honest competition and safeguards all forms of intellectual property through three directorates: Author’s Rights, Inventions and New Technologies, and Trademarks. The business challenge was to unify the agency’s technology infrastructure to create a business process management strategy, consolidate the organization’s Web platform and improve and automate information services for citizens and businesses, and streamline patent procedures by digitizing documentation. Indecopi optimized patent information services , organized information, provided around-the-clock online access to users, and developed a Web site that provides internal and external users access to DIN information, such as patent documentation, through a user-friendly interface. Indecopi achieved impressive business result by reducing use of paper files by 50%, accelerating transaction approvals,  reduce nonvalue-added activities by 85% and  accelerated customer service times by 40%. Company OverviewPeru’s Instituto Nacional de Defensa de la Competencia y de la Protección de la Propiedad Intelectual (Indecopi), the National Institute for the Defense of Competition and Protection of Intellectual Property, is a decentralized public agency that promotes the country’s markets and protects consumer rights. It promotes fair and honest competition and safeguards all forms of intellectual property through three directorates: Author’s Rights, Inventions and New Technologies, and Trademarks. Business ChallengesIndecopi's challenge was to unify the agency’s technology infrastructure to create a business process management strategy, starting with the Directorate of Inventions and New Technologies (DIN), consolidate the organization’s Web platform to meet new demands for software and process development, such as for patent applications, and improve and automate information services for citizens and businesses and streamline patent procedures by digitizing documentation. Solution DeployedIndecopi optimized patent information services with Oracle Business Process Management, automating processes to deliver expedient searches, and to create new services, such as alerts to users. They organized information and provided around-the-clock online access to users with Oracle WebCenter Content. In addition they used Oracle WebLogic Server to develop a Web site that provides internal and external users access to DIN information, such as patent documentation, through a user-friendly interface. Business Results Indecopi achieved impressive business results Reduced use of paper files by 50% Accelerated transaction approvals  reduce nonvalue-added activities, such as manual document copying to obtain patents, by 85% Accelerated customer service times by 40% by optimizing procedures, such as searches and online information related to granting patents “Oracle Business Process Manager has been a paradigm shift in process management. By digitalizing and automating our patents information services, we can now manage everything in the simplest way possible, expanding our options for the creation of new services.” Sergio Rodríguez, Assistant Director, Inventions and New Technologies Directorate, Instituto Nacional de Defensa de la Competencia y la Propiedad Intelectual Additional Information Indecopi Customer Snapshot Oracle WebCenter Content

    Read the article

  • What is SOA ?

    - by llaszews
    First, let’s mention what SOA is not: • SOA is not the same thing as web services. Web Services implies the use of standard such as Java/JAX-RPC, .NET or REST. Web Services also implies the use of a WSDL, SOAP, and/or J2EE Connector Architecture (J2EE CA) and HTTP. SOA architectures can be implemented using J2EE CA, XML file transfer or Remote Procedural Call (RPC) over File Transfer Protocol (FTP), TCP/IP, Remote Method Invocation (RMI) or other protocols. In other words, Web Services are a very specific set of technologies. SOA is a concept and can be implemented in many different ways. Some very rudimentary, such as transfering flat files between applications. • SOA will not solve all of your problems. It will make your business more agile, increase business visibility, reduce integration costs and provide better reuse. However, if you don’t need help in these area or expect SOA to cure all of your IT problems, you are looking in the wrong place. • The concepts behind SOA are not new, but SOA is also not mature. SOA as it stands today has really only been around for 5 years. The concepts of standards based protocol handlers, predefined communication schemas and remote method invocation have been around for decades. So, what is SOA? SOA is an architectural blueprint, a way of developing applications, and a set of best practices. SOA is not an ‘out of the box’ solution you buy, install and then have up and running in a matter of months. SOA is a journey to a better way of doing business and the technology architecture to support this better way of doing business. SOA is also a broader set of technologies including more then just web services. Techologies like an Enterpirse Service Bus (ESB), Business Processs Execution Language (BPEL), message queues and Business Activity Monitoring (BAM) all are part of a SOA architecture. So, what is SOA? SOA is an architectural blueprint, a way of developing applications, and a set of best practices. SOA is not an ‘out of the box’ solution you buy, install and then have up and running in a matter of months. SOA is a journey to a better way of doing business and the technology architecture to support this better way of doing business. SOA is also a broader set of technologies including more then just web services. Techologies like an Enterpirse Service Bus (ESB), Business Processs Execution Language (BPEL), message queues and Business Activity Monitoring (BAM) all are part of a SOA architecture. Read more here: Oracle Modernization Solutions

    Read the article

  • Surefire Ways to Boost Your Search Engine Rankings

    To succeed in business today, it's not enough to have what is regarded as the traditional elements of a business. With technology advancing at such a pace, new requirements have been added for you and your business to succeed - an online presence. Customers now expect that a business can be found on the internet with an online presence, so they can visit and make inquiries and do business.

    Read the article

  • RAID--0 " TWO " DRIVES SSD ONLY Should I use on-board / Software RAID OR a RAID Card / Control

    - by Wes
    I am looking at going with a TWO Drive Only SSD RAID-0 Configuration And was wondering if I would get better performance / Speed from the Use of a RAID Controller / Card Verses just using the Software RAID on my Mother Board. I have herd conflicting reports , Again I only Plan on Running " 2 " SSD Drives in RAID-0 Config I have No- problem spending the extra money for a good controller but only if I am going to benifit performance wise , Otherwise if there is no notable Gain I will just use the Software RAID that my HP-180-T came with Intel- 3.33 GHZ , 6-Core , 12-GB of DDR-3. I have a huge External drive for All Storage and am not concerned about Data loss just looking for pure speed. And if a Controller will benifit my performance Wht type of card would one suggest?

    Read the article

  • Has anyone had luck getting an external hard drive working with a PCMCIA USB card?

    - by Carl
    I would like to know if anyone has had any success in getting and external 2.5" IDE hard drive in an external case (w/USB cable) working when plugged into a PCMCIA USB card. My hard drive doesn't work when plugged into my HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My MP3 player will work fine when plugged into it. I tried plugging in both of the USB cables that are one one end (Y cable), and it doesn't make a difference. I read the problem may be insufficient power.

    Read the article

  • Is a PCIE X1 card for USB 3.0 worth it?

    - by lelouch
    I have a portable HDD on USB 3.0, and soon I'll have a 32gb flash drive on USB 3.0 as well. My motherboard is pretty old - and the next time I'll upgrade it is when I get a new CPU/mobo/ram. Slots on my mobo: PCIE X16 - For my GTX 260 2xPCI PCIE X1 I'm considering purchasing a PCI express X1 card like this - http://www.ebay.com.au/itm/PC-Laptop-2-USB3-0-Ports-PCI-E-PCI-Express-X1-Card-New-/280772000446?pt=AU_Networking&hash=item415f50babe Now the question: What are realistic (read/write) speeds I'll get in this setup, assuming I have 1 USB 3 device connected at a time, and the bottleneck is the PCIE?

    Read the article

  • USB to DVI adapter to get around two monitor limit of my graphics card?

    - by JavaJosh94
    My graphics card is an nVidia GTS 450 which will only run two monitors at a time, but I'd like to add a third one. Will I be able to do that using a USB to DVI adapter or would the limit still be there? Also I've been told the video quality is really bad with these adapters, so is the quality of the video output by these adapters okay for things like web browsing and working on office thing? And is it worth the $60 or would I be better off just buying a cheep second card?

    Read the article

  • How to know my wireless card has injection enabled?

    - by shrimpy
    I am playing around with aircrack. And was trying to see whether my wireless card on my laptop can pass the injection test And I end up seeing the following... does it mean my wireless card is not able to run aircrack? root@myubuntu:/home/myubuntu# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"" Nickname:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=0 dBm Noise level=-57 dBm Rx invalid nwid:0 Rx invalid crypt:781 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 root@myubuntu:/home/myubuntu# aireplay-ng -9 eth1 ioctl(SIOCSIWMODE) failed: Invalid argument ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211, ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled: run 'airmon-ng start eth1 <#>' Sysfs injection support was not found either. root@myubuntu:/home/myubuntu#

    Read the article

  • Entity Framework 5, separating business logic from model - Repository?

    - by bnice7
    I am working on my first public-facing web application and I’m using MVC 4 for the presentation layer and EF 5 for the DAL. The database structure is locked, and there are moderate differences between how the user inputs data and how the database itself gets populated. I have done a ton of reading on the repository pattern (which I have never used) but most of my research is pushing me away from using it since it supposedly creates an unnecessary level of abstraction for the latest versions of EF since repositories and unit-of-work are already built-in. My initial approach is to simply create a separate set of classes for my business objects in the BLL that can act as an intermediary between my Controllers and the DAL. Here’s an example class: public class MyBuilding { public int Id { get; private set; } public string Name { get; set; } public string Notes { get; set; } private readonly Entities _context = new Entities(); // Is this thread safe? private static readonly int UserId = WebSecurity.GetCurrentUser().UserId; public IEnumerable<MyBuilding> GetList() { IEnumerable<MyBuilding> buildingList = from p in _context.BuildingInfo where p.Building.UserProfile.UserId == UserId select new MyBuilding {Id = p.BuildingId, Name = p.BuildingName, Notes = p.Building.Notes}; return buildingList; } public void Create() { var b = new Building {UserId = UserId, Notes = this.Notes}; _context.Building.Add(b); _context.SaveChanges(); // Set the building ID this.Id = b.BuildingId; // Seed 1-to-1 tables with reference the new building _context.BuildingInfo.Add(new BuildingInfo {Building = b}); _context.GeneralInfo.Add(new GeneralInfo {Building = b}); _context.LocationInfo.Add(new LocationInfo {Building = b}); _context.SaveChanges(); } public static MyBuilding Find(int id) { using (var context = new Entities()) // Is this OK to do in a static method? { var b = context.Building.FirstOrDefault(p => p.BuildingId == id && p.UserId == UserId); if (b == null) throw new Exception("Error: Building not found or user does not have access."); return new MyBuilding {Id = b.BuildingId, Name = b.BuildingInfo.BuildingName, Notes = b.Notes}; } } } My primary concern: Is the way I am instantiating my DbContext as a private property thread-safe, and is it safe to have a static method that instantiates a separate DbContext? Or am I approaching this all wrong? I am not opposed to learning up on the repository pattern if I am taking the total wrong approach here.

    Read the article

  • Few Reasons For Hiring an SEO Company

    For any type of business, marketing comprises of a very important part. If the target customers do not get to know about the business, then cannot deal with the company and the business of that company will not increase. Nowadays every company follows several rules and steps for proper marketing of the business. Even the online companies need proper marketing for the advancement of the business.

    Read the article

  • Feature: Lead with Intelligence

    Business efficiency depends on business decisions, and business decisions depend on current, accurate information and powerful analysis. See how Oracle data warehousing, business intelligence, and enterprise performance management solutions deliver the information, analysis, and efficiencies to propel your business ahead of the competition.

    Read the article

  • Multiple monitors (3) in notebook using HDMI and vga port, with a graphic card only.

    - by user34427
    I have a HP dv9830us laptop. It has a vga-out and a hdmi-out port. I want to know if it's possible to use 3 devices, each one with different displays, using just one graphic card - NVIDIA GeForce 8600M GS? (Original, vga with an external monitor and hdmi with a full hd tv). Where I can find this kind of information? If not possible, I would like to know alternatives like: "Usb" solutions to be possible to connect to the external lcd or to a TV. The TV should be flawless, but the second monitor can have slow response times; Cheap PCMCIA video cards to be possible to connect to an external monitor, so I would use the hdmi with the tv and this second video card to output to another monitor. I'm using Windows 7 and Ubuntu 10.04. Is this possible in both systems?

    Read the article

  • Atheros Wireless card shows up as two different models?

    - by geermc4
    Hi I've been fighting these wireless drivers for a few days and just recently i noticed that the model the Wireless controller appears in lspci is different sometimes. This is the data i have after installing Ubuntu Server 64 bit ~# lspci -k .... 04:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: AzureWave Device 1d89 Kernel driver in use: ath9k Kernel modules: ath9k ran some updates, restarted, all was good, all though it did say that linux-headers-server linux-image-server linux-server where beeing kept back. After that i installed ubuntu-desktop (aptitude install ubuntu-desktop --without-recommends) restarted and not only is the wireless not working anymore, but the hardware is listed as a different card ~# lspci -k .... 04:00.0 Ethernet controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) has no available drivers for it, still i tried to modprobe ath9k, they show up in lsmod as loaded, but still iw list shows nothing. this is what it looked like before the ubuntu-desktop instalation Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 2412 MHz [1] (14.0 dBm) * 2417 MHz [2] (15.0 dBm) * 2422 MHz [3] (15.0 dBm) * 2427 MHz [4] (15.0 dBm) * 2432 MHz [5] (15.0 dBm) * 2437 MHz [6] (15.0 dBm) * 2442 MHz [7] (15.0 dBm) * 2447 MHz [8] (15.0 dBm) * 2452 MHz [9] (15.0 dBm) * 2457 MHz [10] (15.0 dBm) * 2462 MHz [11] (15.0 dBm) * 2467 MHz [12] (15.0 dBm) (passive scanning) * 2472 MHz [13] (14.0 dBm) (passive scanning) * 2484 MHz [14] (17.0 dBm) (passive scanning) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x1 RX 0x3 Configured Antennas: TX 0x1 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor interface combinations are not supported Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * connect * disconnect Supported TX frame types: * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 Supported RX frame types: * IBSS: 0x00d0 * managed: 0x0040 0x00d0 * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * mesh point: 0x00b0 0x00c0 0x00d0 * P2P-client: 0x0040 0x00d0 * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 Device supports RSN-IBSS. What's with the hardware change? If it has 2, how can i make the AR9285 always load and disable AR5008, or, is it the same and it's just showing it different? :| Oh and I've tried this on Ubuntu 10.04 server, xubuntu 12.04, ubuntu 12.04 desktop and server. Thanks in advanced. -- Here's some more info, i have it setup in 2 hard drives, 1 works and the other one i'm using to figure it out The one that works... # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.147 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 01 serial: 74:2f:68:4a:26:73 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-18-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:fea00000-fea0ffff Here's where it doesn't # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.160 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network UNCLAIMED description: Ethernet controller product: AR5008 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fea00000-fea0ffff Update I've noticed that if i blacklist the ath9k and ath9k_common modules lspci gives me the AR9285, but then I need to modprobe ath9k for it to work, does this make any sense? If so, why?

    Read the article

  • How can I determine which GPU card is running at PCI Express 2.0 x16 & which is using x8?

    - by M. Tibbits
    Is there a way to determine the speed of the PCI Express connection to a specific card? I have three cards plugged in: two Nvidia GTX 480's (one at x16 & and one at x8) one Nvidia GTX 460 running at x8 Is there some way, either by a function call in C or an option to lspci that I can determine the bus speed of the graphics cards? When I only use one of the cards for my CUDA program, I'd like to use the one which is running at x16. Thanks! Note: lspci -vvv dumps out For the two GTX 480s. I don't see any differences that pertain to bus speed. 03:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at df00 [disabled] [size=128] [virtual] Expansion ROM at b8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 03:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] Capabilities: <access denied> 04:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at cf00 [size=128] [virtual] Expansion ROM at c8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 04:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> And the only differences I see relate specifically to the memory mapping: myComputer:~> diff card1 card2 3c3 < Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 7,11c7,11 < Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] < Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] < Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] < Region 5: I/O ports at df00 [disabled] [size=128] < [virtual] Expansion ROM at b8000000 [disabled] [size=512K] --- > Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] > Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] > Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] > Region 5: I/O ports at cf00 [size=128] > [virtual] Expansion ROM at c8000000 [disabled] [size=512K] 18c18 < Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 19a20 > Latency: 0, Cache Line Size: 64 bytes 21c22 < Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] --- > Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K]

    Read the article

  • Rails: Single Table Inheritance and models subdirectories

    - by Chris
    I have a card-game application which makes use of Single Table Inheritance. I have a class Card, and a database table cards with column type, and a number of subclasses of Card (including class Foo < Card and class Bar < Card, for the sake of argument). As it happens, Foo is a card from the original printing of the game, which Bar is a card from an expansion. In an attempt to rationalise my models, I have created a directory structure like so: app/ + models/ + card.rb + base_game/ + foo.rb + expansion/ + bar.rb And modified environment.rb to contain: Rails::Initializer.run do |config| config.load_paths += Dir["#{RAILS_ROOT}/app/models/**"] end However, when my reads a card from the database, Rails throws the following exception: ActiveRecord::SubclassNotFound (The single-table inheritance mechanism failed to locate the subclass: 'Foo'. This error is raised because the column 'type' is reserved for storing the class in case of inheritance. Please rename this column if you didn't intend it to be used for storing the inheritance class or overwrite Card.inheritance_column to use another column for that information.) Is it possible to make this work, or am I doomed to a flat directory structure?

    Read the article

  • GAE Entity Groups/Transaction

    - by bach
    Hi, Say you have a Client Buying Card object and a product object. When the client chooses the buy opition you create the object and then add a product. It should be transactional but it's not on the same entity group as the product and the card already been persisted, isn't it? Is there any way to overcome this simple scenario safely and easily? here's a code sample: Transaction tx = pm.currentTransaction(); tx.begin(); Product prod = pm.getObjectById(Product.class, "TV"); prod.setReserved(true); pm.makePersistent(prod); Card card = pm.getObjectById(Card.class, "user123"); /// <--- will thorw an exception as card and prod aren't on the same entity group card.setProd(prod); pm.makePersistent(card); try { tx.commit(); break; }

    Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >